diff options
Diffstat (limited to 'arch')
34 files changed, 106 insertions, 1152 deletions
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 22a3eb3..496d635 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -211,10 +211,12 @@ config SH_SOLUTION_ENGINE bool "SolutionEngine" select SOLUTION_ENGINE select CPU_HAS_IPR_IRQ - depends on CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7750 + depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \ + CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \ + CPU_SUBTYPE_SH7750R help - Select SolutionEngine if configuring for a Hitachi SH7709 - or SH7750 evaluation board. + Select SolutionEngine if configuring for a Hitachi SH7705, SH7709, + SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board. config SH_7206_SOLUTION_ENGINE bool "SolutionEngine7206" @@ -603,7 +605,7 @@ config BOOT_LINK_OFFSET config UBC_WAKEUP bool "Wakeup UBC on startup" - depends on CPU_SH4 + depends on CPU_SH4 && !CPU_SH4A help Selecting this option will wakeup the User Break Controller (UBC) on startup. Although the UBC is left in an awake state when the processor diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index ab2f9f3..722da68 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -124,12 +124,13 @@ config KGDB_NMI config SH_KGDB_CONSOLE bool "Console messages through GDB" - depends on !SERIAL_SH_SCI_CONSOLE + depends on !SERIAL_SH_SCI_CONSOLE && SERIAL_SH_SCI=y select SERIAL_CORE_CONSOLE default n config KGDB_SYSRQ bool "Allow SysRq 'G' to enter KGDB" + depends on MAGIC_SYSRQ default y comment "Serial port setup" diff --git a/arch/sh/boards/renesas/hs7751rvoip/irq.c b/arch/sh/boards/renesas/hs7751rvoip/irq.c index 943f93a..e55c668 100644 --- a/arch/sh/boards/renesas/hs7751rvoip/irq.c +++ b/arch/sh/boards/renesas/hs7751rvoip/irq.c @@ -12,6 +12,7 @@ #include <linux/init.h> #include <linux/irq.h> +#include <linux/interrupt.h> #include <asm/io.h> #include <asm/irq.h> #include <asm/hs7751rvoip.h> diff --git a/arch/sh/boards/renesas/hs7751rvoip/setup.c b/arch/sh/boards/renesas/hs7751rvoip/setup.c index fa5fa39..c056259 100644 --- a/arch/sh/boards/renesas/hs7751rvoip/setup.c +++ b/arch/sh/boards/renesas/hs7751rvoip/setup.c @@ -15,20 +15,6 @@ #include <asm/io.h> #include <asm/machvec.h> -static struct ipr_data hs77501rvoip_ipr_map[] = { -#if defined(CONFIG_HS7751RVOIP_CODEC) - { DMTE0_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, - { DMTE1_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, -#endif -}; - -static void __init hs7751rvoip_init_irq(void) -{ - make_ipr_irq(hs77501rvoip_ipr_map, ARRAY_SIZE(hs77501rvoip_ipr_map)); - - init_hs7751rvoip_IRQ(); -} - static void hs7751rvoip_power_off(void) { ctrl_outw(ctrl_inw(PA_OUTPORTR) & 0xffdf, PA_OUTPORTR); @@ -75,14 +61,13 @@ static int __init hs7751rvoip_cf_init(void) return 0; } +device_initcall(hs7751rvoip_cf_init); /* * Initialize the board */ static void __init hs7751rvoip_setup(char **cmdline_p) { - device_initcall(hs7751rvoip_cf_init); - ctrl_outb(0xf0, PA_OUTPORTR); pm_power_off = hs7751rvoip_power_off; @@ -115,6 +100,6 @@ static struct sh_machine_vector mv_hs7751rvoip __initmv = { .mv_outsw = hs7751rvoip_outsw, .mv_outsl = hs7751rvoip_outsl, - .mv_init_irq = hs7751rvoip_init_irq, + .mv_init_irq = init_hs7751rvoip_IRQ, .mv_ioport_map = hs7751rvoip_ioport_map, }; diff --git a/arch/sh/boards/renesas/sh7710voipgw/setup.c b/arch/sh/boards/renesas/sh7710voipgw/setup.c index 2dce8bd..0d56fd8 100644 --- a/arch/sh/boards/renesas/sh7710voipgw/setup.c +++ b/arch/sh/boards/renesas/sh7710voipgw/setup.c @@ -11,7 +11,6 @@ #include <asm/machvec.h> #include <asm/irq.h> #include <asm/io.h> -#include <asm/irq.h> static struct ipr_data sh7710voipgw_ipr_map[] = { { TIMER2_IRQ, TIMER2_IPR_ADDR, TIMER2_IPR_POS, TIMER2_PRIORITY }, diff --git a/arch/sh/boards/se/7206/irq.c b/arch/sh/boards/se/7206/irq.c index 27da884..9d5bfc7 100644 --- a/arch/sh/boards/se/7206/irq.c +++ b/arch/sh/boards/se/7206/irq.c @@ -9,7 +9,6 @@ #include <linux/init.h> #include <linux/irq.h> #include <linux/io.h> -#include <linux/irq.h> #include <linux/interrupt.h> #include <asm/se7206.h> diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/se/770x/setup.c index d07a336..318bc8a 100644 --- a/arch/sh/boards/se/770x/setup.c +++ b/arch/sh/boards/se/770x/setup.c @@ -94,6 +94,7 @@ static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 }; static struct heartbeat_data heartbeat_data = { .bit_pos = heartbeat_bit_pos, .nr_bits = ARRAY_SIZE(heartbeat_bit_pos), + .regsize = 16, }; static struct resource heartbeat_resources[] = { diff --git a/arch/sh/boards/se/7722/setup.c b/arch/sh/boards/se/7722/setup.c index 20f0640..eb97dca 100644 --- a/arch/sh/boards/se/7722/setup.c +++ b/arch/sh/boards/se/7722/setup.c @@ -16,8 +16,13 @@ #include <asm/machvec.h> #include <asm/se7722.h> #include <asm/io.h> +#include <asm/heartbeat.h> /* Heartbeat */ +static struct heartbeat_data heartbeat_data = { + .regsize = 16, +}; + static struct resource heartbeat_resources[] = { [0] = { .start = PA_LED, @@ -29,6 +34,9 @@ static struct resource heartbeat_resources[] = { static struct platform_device heartbeat_device = { .name = "heartbeat", .id = -1, + .dev = { + .platform_data = &heartbeat_data, + }, .num_resources = ARRAY_SIZE(heartbeat_resources), .resource = heartbeat_resources, }; diff --git a/arch/sh/boards/se/7780/setup.c b/arch/sh/boards/se/7780/setup.c index 76e53b2..0f08ab3 100644 --- a/arch/sh/boards/se/7780/setup.c +++ b/arch/sh/boards/se/7780/setup.c @@ -14,8 +14,13 @@ #include <asm/machvec.h> #include <asm/se7780.h> #include <asm/io.h> +#include <asm/heartbeat.h> /* Heartbeat */ +static struct heartbeat_data heartbeat_data = { + .regsize = 16, +}; + static struct resource heartbeat_resources[] = { [0] = { .start = PA_LED, @@ -27,6 +32,9 @@ static struct resource heartbeat_resources[] = { static struct platform_device heartbeat_device = { .name = "heartbeat", .id = -1, + .dev = { + .platform_data = &heartbeat_data, + }, .num_resources = ARRAY_SIZE(heartbeat_resources), .resource = heartbeat_resources, }; diff --git a/arch/sh/boards/snapgear/Makefile b/arch/sh/boards/snapgear/Makefile index 59fc976..d2d2f4b 100644 --- a/arch/sh/boards/snapgear/Makefile +++ b/arch/sh/boards/snapgear/Makefile @@ -2,5 +2,4 @@ # Makefile for the SnapGear specific parts of the kernel # -obj-y := setup.o io.o rtc.o - +obj-y := setup.o io.o diff --git a/arch/sh/boards/snapgear/rtc.c b/arch/sh/boards/snapgear/rtc.c deleted file mode 100644 index edb3dd9..0000000 --- a/arch/sh/boards/snapgear/rtc.c +++ /dev/null @@ -1,309 +0,0 @@ -/****************************************************************************/ -/* - * linux/arch/sh/boards/snapgear/rtc.c -- Secureedge5410 RTC code - * - * Copyright (C) 2002 David McCullough <davidm@snapgear.com> - * Copyright (C) 2003 Paul Mundt <lethal@linux-sh.org> - * - * The SecureEdge5410 can have one of 2 real time clocks, the SH - * built in version or the preferred external DS1302. Here we work out - * each to see what we have and then run with it. - */ -/****************************************************************************/ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/time.h> -#include <linux/rtc.h> -#include <linux/mc146818rtc.h> -#include <asm/io.h> - -static int use_ds1302; - -/****************************************************************************/ -/* - * we need to implement a DS1302 driver here that can operate in - * conjunction with the builtin rtc driver which is already quite friendly - */ -/*****************************************************************************/ - -#define RTC_CMD_READ 0x81 /* Read command */ -#define RTC_CMD_WRITE 0x80 /* Write command */ - -#define RTC_ADDR_YEAR 0x06 /* Address of year register */ -#define RTC_ADDR_DAY 0x05 /* Address of day of week register */ -#define RTC_ADDR_MON 0x04 /* Address of month register */ -#define RTC_ADDR_DATE 0x03 /* Address of day of month register */ -#define RTC_ADDR_HOUR 0x02 /* Address of hour register */ -#define RTC_ADDR_MIN 0x01 /* Address of minute register */ -#define RTC_ADDR_SEC 0x00 /* Address of second register */ - -#define RTC_RESET 0x1000 -#define RTC_IODATA 0x0800 -#define RTC_SCLK 0x0400 - -#define set_dirp(x) -#define get_dirp(x) 0 -#define set_dp(x) SECUREEDGE_WRITE_IOPORT(x, 0x1c00) -#define get_dp(x) SECUREEDGE_READ_IOPORT() - -static void ds1302_sendbits(unsigned int val) -{ - int i; - - for (i = 8; (i); i--, val >>= 1) { - set_dp((get_dp() & ~RTC_IODATA) | ((val & 0x1) ? RTC_IODATA : 0)); - set_dp(get_dp() | RTC_SCLK); // clock high - set_dp(get_dp() & ~RTC_SCLK); // clock low - } -} - -static unsigned int ds1302_recvbits(void) -{ - unsigned int val; - int i; - - for (i = 0, val = 0; (i < 8); i++) { - val |= (((get_dp() & RTC_IODATA) ? 1 : 0) << i); - set_dp(get_dp() | RTC_SCLK); // clock high - set_dp(get_dp() & ~RTC_SCLK); // clock low - } - return(val); -} - -static unsigned int ds1302_readbyte(unsigned int addr) -{ - unsigned int val; - unsigned long flags; - - local_irq_save(flags); - set_dirp(get_dirp() | RTC_RESET | RTC_IODATA | RTC_SCLK); - set_dp(get_dp() & ~(RTC_RESET | RTC_IODATA | RTC_SCLK)); - - set_dp(get_dp() | RTC_RESET); - ds1302_sendbits(((addr & 0x3f) << 1) | RTC_CMD_READ); - set_dirp(get_dirp() & ~RTC_IODATA); - val = ds1302_recvbits(); - set_dp(get_dp() & ~RTC_RESET); - local_irq_restore(flags); - - return(val); -} - -static void ds1302_writebyte(unsigned int addr, unsigned int val) -{ - unsigned long flags; - - local_irq_save(flags); - set_dirp(get_dirp() | RTC_RESET | RTC_IODATA | RTC_SCLK); - set_dp(get_dp() & ~(RTC_RESET | RTC_IODATA | RTC_SCLK)); - set_dp(get_dp() | RTC_RESET); - ds1302_sendbits(((addr & 0x3f) << 1) | RTC_CMD_WRITE); - ds1302_sendbits(val); - set_dp(get_dp() & ~RTC_RESET); - local_irq_restore(flags); -} - -static void ds1302_reset(void) -{ - unsigned long flags; - /* Hardware dependent reset/init */ - local_irq_save(flags); - set_dirp(get_dirp() | RTC_RESET | RTC_IODATA | RTC_SCLK); - set_dp(get_dp() & ~(RTC_RESET | RTC_IODATA | RTC_SCLK)); - local_irq_restore(flags); -} - -/*****************************************************************************/ - -static inline int bcd2int(int val) -{ - return((((val & 0xf0) >> 4) * 10) + (val & 0xf)); -} - -static inline int int2bcd(int val) -{ - return(((val / 10) << 4) + (val % 10)); -} - -/*****************************************************************************/ -/* - * Write and Read some RAM in the DS1302, if it works assume it's there - * Otherwise use the SH4 internal RTC - */ - -void snapgear_rtc_gettimeofday(struct timespec *); -int snapgear_rtc_settimeofday(const time_t); - -void __init secureedge5410_rtc_init(void) -{ - unsigned char *test = "snapgear"; - int i; - - ds1302_reset(); - - use_ds1302 = 1; - - for (i = 0; test[i]; i++) - ds1302_writebyte(32 + i, test[i]); - - for (i = 0; test[i]; i++) - if (ds1302_readbyte(32 + i) != test[i]) { - use_ds1302 = 0; - break; - } - - if (use_ds1302) { - rtc_sh_get_time = snapgear_rtc_gettimeofday; - rtc_sh_set_time = snapgear_rtc_settimeofday; - } - - printk("SnapGear RTC: using %s rtc.\n", use_ds1302 ? "ds1302" : "internal"); -} - -/****************************************************************************/ -/* - * our generic interface that chooses the correct code to use - */ - -void snapgear_rtc_gettimeofday(struct timespec *ts) -{ - unsigned int sec, min, hr, day, mon, yr; - - if (!use_ds1302) - return; - - sec = bcd2int(ds1302_readbyte(RTC_ADDR_SEC)); - min = bcd2int(ds1302_readbyte(RTC_ADDR_MIN)); - hr = bcd2int(ds1302_readbyte(RTC_ADDR_HOUR)); - day = bcd2int(ds1302_readbyte(RTC_ADDR_DATE)); - mon = bcd2int(ds1302_readbyte(RTC_ADDR_MON)); - yr = bcd2int(ds1302_readbyte(RTC_ADDR_YEAR)); - -bad_time: - if (yr > 99 || mon < 1 || mon > 12 || day > 31 || day < 1 || - hr > 23 || min > 59 || sec > 59) { - printk(KERN_ERR - "SnapGear RTC: invalid value, resetting to 1 Jan 2000\n"); - ds1302_writebyte(RTC_ADDR_MIN, min = 0); - ds1302_writebyte(RTC_ADDR_HOUR, hr = 0); - ds1302_writebyte(RTC_ADDR_DAY, 7); - ds1302_writebyte(RTC_ADDR_DATE, day = 1); - ds1302_writebyte(RTC_ADDR_MON, mon = 1); - ds1302_writebyte(RTC_ADDR_YEAR, yr = 0); - ds1302_writebyte(RTC_ADDR_SEC, sec = 0); - } - - ts->tv_sec = mktime(2000 + yr, mon, day, hr, min, sec); - if (ts->tv_sec < 0) { -#if 0 - printk("BAD TIME %d %d %d %d %d %d\n", yr, mon, day, hr, min, sec); -#endif - yr = 100; - goto bad_time; - } - ts->tv_nsec = 0; -} - -int snapgear_rtc_settimeofday(const time_t secs) -{ - int retval = 0; - int real_seconds, real_minutes, cmos_minutes; - unsigned long nowtime; - - if (!use_ds1302) - return 0; - -/* - * This is called direct from the kernel timer handling code. - * It is supposed to synchronize the kernel clock to the RTC. - */ - - nowtime = secs; - - /* STOP RTC */ - ds1302_writebyte(RTC_ADDR_SEC, ds1302_readbyte(RTC_ADDR_SEC) | 0x80); - - cmos_minutes = bcd2int(ds1302_readbyte(RTC_ADDR_MIN)); - - /* - * since we're only adjusting minutes and seconds, - * don't interfere with hour overflow. This avoids - * messing with unknown time zones but requires your - * RTC not to be off by more than 15 minutes - */ - real_seconds = nowtime % 60; - real_minutes = nowtime / 60; - if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1) - real_minutes += 30; /* correct for half hour time zone */ - real_minutes %= 60; - - if (abs(real_minutes - cmos_minutes) < 30) { - ds1302_writebyte(RTC_ADDR_MIN, int2bcd(real_minutes)); - ds1302_writebyte(RTC_ADDR_SEC, int2bcd(real_seconds)); - } else { - printk(KERN_WARNING - "SnapGear RTC: can't update from %d to %d\n", - cmos_minutes, real_minutes); - retval = -1; - } - - /* START RTC */ - ds1302_writebyte(RTC_ADDR_SEC, ds1302_readbyte(RTC_ADDR_SEC) & ~0x80); - return(0); -} - -unsigned char secureedge5410_cmos_read(int addr) -{ - unsigned char val = 0; - - if (!use_ds1302) - return(__CMOS_READ(addr, w)); - - switch(addr) { - case RTC_SECONDS: val = ds1302_readbyte(RTC_ADDR_SEC); break; - case RTC_SECONDS_ALARM: break; - case RTC_MINUTES: val = ds1302_readbyte(RTC_ADDR_MIN); break; - case RTC_MINUTES_ALARM: break; - case RTC_HOURS: val = ds1302_readbyte(RTC_ADDR_HOUR); break; - case RTC_HOURS_ALARM: break; - case RTC_DAY_OF_WEEK: val = ds1302_readbyte(RTC_ADDR_DAY); break; - case RTC_DAY_OF_MONTH: val = ds1302_readbyte(RTC_ADDR_DATE); break; - case RTC_MONTH: val = ds1302_readbyte(RTC_ADDR_MON); break; - case RTC_YEAR: val = ds1302_readbyte(RTC_ADDR_YEAR); break; - case RTC_REG_A: /* RTC_FREQ_SELECT */ break; - case RTC_REG_B: /* RTC_CONTROL */ break; - case RTC_REG_C: /* RTC_INTR_FLAGS */ break; - case RTC_REG_D: val = RTC_VRT /* RTC_VALID */; break; - default: break; - } - - return(val); -} - -void secureedge5410_cmos_write(unsigned char val, int addr) -{ - if (!use_ds1302) { - __CMOS_WRITE(val, addr, w); - return; - } - - switch(addr) { - case RTC_SECONDS: ds1302_writebyte(RTC_ADDR_SEC, val); break; - case RTC_SECONDS_ALARM: break; - case RTC_MINUTES: ds1302_writebyte(RTC_ADDR_MIN, val); break; - case RTC_MINUTES_ALARM: break; - case RTC_HOURS: ds1302_writebyte(RTC_ADDR_HOUR, val); break; - case RTC_HOURS_ALARM: break; - case RTC_DAY_OF_WEEK: ds1302_writebyte(RTC_ADDR_DAY, val); break; - case RTC_DAY_OF_MONTH: ds1302_writebyte(RTC_ADDR_DATE, val); break; - case RTC_MONTH: ds1302_writebyte(RTC_ADDR_MON, val); break; - case RTC_YEAR: ds1302_writebyte(RTC_ADDR_YEAR, val); break; - case RTC_REG_A: /* RTC_FREQ_SELECT */ break; - case RTC_REG_B: /* RTC_CONTROL */ break; - case RTC_REG_C: /* RTC_INTR_FLAGS */ break; - case RTC_REG_D: /* RTC_VALID */ break; - default: break; - } -} diff --git a/arch/sh/boards/snapgear/setup.c b/arch/sh/boards/snapgear/setup.c index 2b594f6..7022483f 100644 --- a/arch/sh/boards/snapgear/setup.c +++ b/arch/sh/boards/snapgear/setup.c @@ -22,20 +22,15 @@ #include <asm/snapgear.h> #include <asm/irq.h> #include <asm/io.h> -#include <asm/rtc.h> #include <asm/cpu/timer.h> -extern void secureedge5410_rtc_init(void); -extern void pcibios_init(void); - -/****************************************************************************/ /* * EraseConfig handling functions */ static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id) { - volatile char dummy __attribute__((unused)) = * (volatile char *) 0xb8000000; + (void)ctrl_inb(0xb8000000); /* dummy read */ printk("SnapGear: erase switch interrupt!\n"); @@ -76,19 +71,10 @@ static void __init init_snapgear_IRQ(void) } /* - * Initialize the board - */ -static void __init snapgear_setup(char **cmdline_p) -{ - board_time_init = secureedge5410_rtc_init; -} - -/* * The Machine Vector */ static struct sh_machine_vector mv_snapgear __initmv = { .mv_name = "SnapGear SecureEdge5410", - .mv_setup = snapgear_setup, .mv_nr_irqs = 72, .mv_inb = snapgear_inb, diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile index 4c5ffdc..1b0f5be 100644 --- a/arch/sh/boot/Makefile +++ b/arch/sh/boot/Makefile @@ -39,7 +39,7 @@ KERNEL_LOAD := $(shell /bin/bash -c 'printf "0x%8x" \ quiet_cmd_uimage = UIMAGE $@ cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A sh -O linux -T kernel \ - -C gzip -a $(KERNEL_LOAD) -e $(KERNEL_LOAD) \ + -C none -a $(KERNEL_LOAD) -e $(KERNEL_LOAD) \ -n 'Linux-$(KERNELRELEASE)' -d $< $@ $(obj)/uImage: $(obj)/zImage FORCE diff --git a/arch/sh/cchips/hd6446x/Makefile b/arch/sh/cchips/hd6446x/Makefile index a106dd9..f7de407 100644 --- a/arch/sh/cchips/hd6446x/Makefile +++ b/arch/sh/cchips/hd6446x/Makefile @@ -1,2 +1,4 @@ obj-$(CONFIG_HD64461) += hd64461.o obj-$(CONFIG_HD64465) += hd64465/ + +EXTRA_CFLAGS += -Werror diff --git a/arch/sh/cchips/voyagergx/Makefile b/arch/sh/cchips/voyagergx/Makefile index 085de72..f73963c 100644 --- a/arch/sh/cchips/voyagergx/Makefile +++ b/arch/sh/cchips/voyagergx/Makefile @@ -6,3 +6,4 @@ obj-y := irq.o setup.o obj-$(CONFIG_USB_OHCI_HCD) += consistent.o +EXTRA_CFLAGS += -Werror diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index 2f65ac7..fba6b5b 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -5,7 +5,6 @@ obj-y += pci.o obj-$(CONFIG_PCI_AUTO) += pci-auto.o -obj-$(CONFIG_CPU_SUBTYPE_ST40STB1) += pci-st40.o obj-$(CONFIG_CPU_SUBTYPE_SH7751) += pci-sh7751.o ops-sh4.o obj-$(CONFIG_CPU_SUBTYPE_SH7751R) += pci-sh7751.o ops-sh4.o obj-$(CONFIG_CPU_SUBTYPE_SH7780) += pci-sh7780.o ops-sh4.o diff --git a/arch/sh/drivers/pci/pci-st40.c b/arch/sh/drivers/pci/pci-st40.c deleted file mode 100644 index 0814a5a..0000000 --- a/arch/sh/drivers/pci/pci-st40.c +++ /dev/null @@ -1,488 +0,0 @@ -/* - * Copyright (C) 2001 David J. Mckay (david.mckay@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Support functions for the ST40 PCI hardware. - */ - -#include <linux/kernel.h> -#include <linux/smp.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/pci.h> -#include <linux/delay.h> -#include <linux/types.h> -#include <asm/pci.h> -#include <linux/irq.h> -#include <linux/interrupt.h> /* irqreturn_t */ - -#include "pci-st40.h" - -/* This is in P2 of course */ -#define ST40PCI_BASE_ADDRESS (0xb0000000) -#define ST40PCI_MEM_ADDRESS (ST40PCI_BASE_ADDRESS+0x0) -#define ST40PCI_IO_ADDRESS (ST40PCI_BASE_ADDRESS+0x06000000) -#define ST40PCI_REG_ADDRESS (ST40PCI_BASE_ADDRESS+0x07000000) - -#define ST40PCI_REG(x) (ST40PCI_REG_ADDRESS+(ST40PCI_##x)) -#define ST40PCI_REG_INDEXED(reg, index) \ - (ST40PCI_REG(reg##0) + \ - ((ST40PCI_REG(reg##1) - ST40PCI_REG(reg##0))*index)) - -#define ST40PCI_WRITE(reg,val) writel((val),ST40PCI_REG(reg)) -#define ST40PCI_WRITE_SHORT(reg,val) writew((val),ST40PCI_REG(reg)) -#define ST40PCI_WRITE_BYTE(reg,val) writeb((val),ST40PCI_REG(reg)) -#define ST40PCI_WRITE_INDEXED(reg, index, val) \ - writel((val), ST40PCI_REG_INDEXED(reg, index)); - -#define ST40PCI_READ(reg) readl(ST40PCI_REG(reg)) -#define ST40PCI_READ_SHORT(reg) readw(ST40PCI_REG(reg)) -#define ST40PCI_READ_BYTE(reg) readb(ST40PCI_REG(reg)) - -#define ST40PCI_SERR_IRQ 64 -#define ST40PCI_ERR_IRQ 65 - - -/* Macros to extract PLL params */ -#define PLL_MDIV(reg) ( ((unsigned)reg) & 0xff ) -#define PLL_NDIV(reg) ( (((unsigned)reg)>>8) & 0xff ) -#define PLL_PDIV(reg) ( (((unsigned)reg)>>16) & 0x3 ) -#define PLL_SETUP(reg) ( (((unsigned)reg)>>19) & 0x1ff ) - -/* Build up the appropriate settings */ -#define PLL_SET(mdiv,ndiv,pdiv,setup) \ -( ((mdiv)&0xff) | (((ndiv)&0xff)<<8) | (((pdiv)&3)<<16)| (((setup)&0x1ff)<<19)) - -#define PLLPCICR (0xbb040000+0x10) - -#define PLLPCICR_POWERON (1<<28) -#define PLLPCICR_OUT_EN (1<<29) -#define PLLPCICR_LOCKSELECT (1<<30) -#define PLLPCICR_LOCK (1<<31) - - -#define PLL_25MHZ 0x793c8512 -#define PLL_33MHZ PLL_SET(18,88,3,295) - -static void pci_set_rbar_region(unsigned int region, unsigned long localAddr, - unsigned long pciOffset, unsigned long regionSize); - -static __init void SetPCIPLL(void) -{ - { - /* Lets play with the PLL values */ - unsigned long pll1cr1; - unsigned long mdiv, ndiv, pdiv; - unsigned long muxcr; - unsigned int muxcr_ratios[4] = { 8, 16, 21, 1 }; - unsigned int freq; - -#define CLKGENA 0xbb040000 -#define CLKGENA_PLL2_MUXCR CLKGENA + 0x48 - pll1cr1 = ctrl_inl(PLLPCICR); - printk("PLL1CR1 %08lx\n", pll1cr1); - mdiv = PLL_MDIV(pll1cr1); - ndiv = PLL_NDIV(pll1cr1); - pdiv = PLL_PDIV(pll1cr1); - printk("mdiv %02lx ndiv %02lx pdiv %02lx\n", mdiv, ndiv, pdiv); - freq = ((2*27*ndiv)/mdiv) / (1 << pdiv); - printk("PLL freq %dMHz\n", freq); - muxcr = ctrl_inl(CLKGENA_PLL2_MUXCR); - printk("PCI freq %dMhz\n", freq / muxcr_ratios[muxcr & 3]); - } -} - - -struct pci_err { - unsigned mask; - const char *error_string; -}; - -static struct pci_err int_error[]={ - { INT_MNLTDIM,"MNLTDIM: Master non-lock transfer"}, - { INT_TTADI, "TTADI: Illegal byte enable in I/O transfer"}, - { INT_TMTO, "TMTO: Target memory read/write timeout"}, - { INT_MDEI, "MDEI: Master function disable error"}, - { INT_APEDI, "APEDI: Address parity error"}, - { INT_SDI, "SDI: SERR detected"}, - { INT_DPEITW, "DPEITW: Data parity error target write"}, - { INT_PEDITR, "PEDITR: PERR detected"}, - { INT_TADIM, "TADIM: Target abort detected"}, - { INT_MADIM, "MADIM: Master abort detected"}, - { INT_MWPDI, "MWPDI: PERR from target at data write"}, - { INT_MRDPEI, "MRDPEI: Master read data parity error"} -}; -#define NUM_PCI_INT_ERRS ARRAY_SIZE(int_error) - -static struct pci_err aint_error[]={ - { AINT_MBI, "MBI: Master broken"}, - { AINT_TBTOI, "TBTOI: Target bus timeout"}, - { AINT_MBTOI, "MBTOI: Master bus timeout"}, - { AINT_TAI, "TAI: Target abort"}, - { AINT_MAI, "MAI: Master abort"}, - { AINT_RDPEI, "RDPEI: Read data parity"}, - { AINT_WDPE, "WDPE: Write data parity"} -}; - -#define NUM_PCI_AINT_ERRS ARRAY_SIZE(aint_error) - -static void print_pci_errors(unsigned reg,struct pci_err *error,int num_errors) -{ - int i; - - for(i=0;i<num_errors;i++) { - if(reg & error[i].mask) { - printk("%s\n",error[i].error_string); - } - } - -} - - -static char * pci_commands[16]={ - "Int Ack", - "Special Cycle", - "I/O Read", - "I/O Write", - "Reserved", - "Reserved", - "Memory Read", - "Memory Write", - "Reserved", - "Reserved", - "Configuration Read", - "Configuration Write", - "Memory Read Multiple", - "Dual Address Cycle", - "Memory Read Line", - "Memory Write-and-Invalidate" -}; - -static irqreturn_t st40_pci_irq(int irq, void *dev_instance) -{ - unsigned pci_int, pci_air, pci_cir, pci_aint; - static int count=0; - - - pci_int = ST40PCI_READ(INT);pci_aint = ST40PCI_READ(AINT); - pci_cir = ST40PCI_READ(CIR);pci_air = ST40PCI_READ(AIR); - - /* Reset state to stop multiple interrupts */ - ST40PCI_WRITE(INT, ~0); ST40PCI_WRITE(AINT, ~0); - - - if(++count>1) return IRQ_HANDLED; - - printk("** PCI ERROR **\n"); - - if(pci_int) { - printk("** INT register status\n"); - print_pci_errors(pci_int,int_error,NUM_PCI_INT_ERRS); - } - - if(pci_aint) { - printk("** AINT register status\n"); - print_pci_errors(pci_aint,aint_error,NUM_PCI_AINT_ERRS); - } - - printk("** Address and command info\n"); - - printk("** Command %s : Address 0x%x\n", - pci_commands[pci_cir&0xf],pci_air); - - if(pci_cir&CIR_PIOTEM) { - printk("CIR_PIOTEM:PIO transfer error for master\n"); - } - if(pci_cir&CIR_RWTET) { - printk("CIR_RWTET:Read/Write transfer error for target\n"); - } - - return IRQ_HANDLED; -} - - -/* Rounds a number UP to the nearest power of two. Used for - * sizing the PCI window. - */ -static u32 r2p2(u32 num) -{ - int i = 31; - u32 tmp = num; - - if (num == 0) - return 0; - - do { - if (tmp & (1 << 31)) - break; - i--; - tmp <<= 1; - } while (i >= 0); - - tmp = 1 << i; - /* If the original number isn't a power of 2, round it up */ - if (tmp != num) - tmp <<= 1; - - return tmp; -} - -static void __init pci_fixup_ide_bases(struct pci_dev *d) -{ - int i; - - /* - * PCI IDE controllers use non-standard I/O port decoding, respect it. - */ - if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE) - return; - printk("PCI: IDE base address fixup for %s\n", pci_name(d)); - for(i=0; i<4; i++) { - struct resource *r = &d->resource[i]; - if ((r->start & ~0x80) == 0x374) { - r->start |= 2; - r->end = r->start; - } - } -} -DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases); - -int __init st40pci_init(unsigned memStart, unsigned memSize) -{ - u32 lsr0; - - SetPCIPLL(); - - /* Initialises the ST40 pci subsystem, performing a reset, then programming - * up the address space decoders appropriately - */ - - /* Should reset core here as well methink */ - - ST40PCI_WRITE(CR, CR_LOCK_MASK | CR_SOFT_RESET); - - /* Loop while core resets */ - while (ST40PCI_READ(CR) & CR_SOFT_RESET); - - /* Switch off interrupts */ - ST40PCI_WRITE(INTM, 0); - ST40PCI_WRITE(AINT, 0); - - /* Now, lets reset all the cards on the bus with extreme prejudice */ - ST40PCI_WRITE(CR, CR_LOCK_MASK | CR_RSTCTL); - udelay(250); - - /* Set bus active, take it out of reset */ - ST40PCI_WRITE(CR, CR_LOCK_MASK | CR_BMAM | CR_CFINT | CR_PFCS | CR_PFE); - - /* The PCI spec says that no access must be made to the bus until 1 second - * after reset. This seem ludicrously long, but some delay is needed here - */ - mdelay(1000); - - /* Switch off interrupts */ - ST40PCI_WRITE(INTM, 0); - ST40PCI_WRITE(AINT, 0); - - /* Allow it to be a master */ - - ST40PCI_WRITE_SHORT(CSR_CMD, - PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | - PCI_COMMAND_IO); - - /* Access to the 0xb0000000 -> 0xb6000000 area will go through to 0x10000000 -> 0x16000000 - * on the PCI bus. This allows a nice 1-1 bus to phys mapping. - */ - - - ST40PCI_WRITE(MBR, 0x10000000); - /* Always set the max size 128M (actually, it is only 96MB wide) */ - ST40PCI_WRITE(MBMR, 0x07ff0000); - - /* I/O addresses are mapped at 0xb6000000 -> 0xb7000000. These are changed to 0, to - * allow cards that have legacy io such as vga to function correctly. This gives a - * maximum of 64K of io/space as only the bottom 16 bits of the address are copied - * over to the bus when the transaction is made. 64K of io space is more than enough - */ - ST40PCI_WRITE(IOBR, 0x0); - /* Set up the 64K window */ - ST40PCI_WRITE(IOBMR, 0x0); - - /* Now we set up the mbars so the PCI bus can see the local memory */ - /* Expose a 256M window starting at PCI address 0... */ - ST40PCI_WRITE(CSR_MBAR0, 0); - ST40PCI_WRITE(LSR0, 0x0fff0001); - - /* ... and set up the initial incoming window to expose all of RAM */ - pci_set_rbar_region(7, memStart, memStart, memSize); - - /* Maximise timeout values */ - ST40PCI_WRITE_BYTE(CSR_TRDY, 0xff); - ST40PCI_WRITE_BYTE(CSR_RETRY, 0xff); - ST40PCI_WRITE_BYTE(CSR_MIT, 0xff); - - ST40PCI_WRITE_BYTE(PERF,PERF_MASTER_WRITE_POSTING); - - return 1; -} - -char * __devinit pcibios_setup(char *str) -{ - return str; -} - - -#define SET_CONFIG_BITS(bus,devfn,where)\ - (((bus) << 16) | ((devfn) << 8) | ((where) & ~3) | (bus!=0)) - -#define CONFIG_CMD(bus, devfn, where) SET_CONFIG_BITS(bus->number,devfn,where) - - -static int CheckForMasterAbort(void) -{ - if (ST40PCI_READ(INT) & INT_MADIM) { - /* Should we clear config space version as well ??? */ - ST40PCI_WRITE(INT, INT_MADIM); - ST40PCI_WRITE_SHORT(CSR_STATUS, 0); - return 1; - } - - return 0; -} - -/* Write to config register */ -static int st40pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val) -{ - ST40PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where)); - switch (size) { - case 1: - *val = (u8)ST40PCI_READ_BYTE(PDR + (where & 3)); - break; - case 2: - *val = (u16)ST40PCI_READ_SHORT(PDR + (where & 2)); - break; - case 4: - *val = ST40PCI_READ(PDR); - break; - } - - if (CheckForMasterAbort()){ - switch (size) { - case 1: - *val = (u8)0xff; - break; - case 2: - *val = (u16)0xffff; - break; - case 4: - *val = 0xffffffff; - break; - } - } - - return PCIBIOS_SUCCESSFUL; -} - -static int st40pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val) -{ - ST40PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where)); - - switch (size) { - case 1: - ST40PCI_WRITE_BYTE(PDR + (where & 3), (u8)val); - break; - case 2: - ST40PCI_WRITE_SHORT(PDR + (where & 2), (u16)val); - break; - case 4: - ST40PCI_WRITE(PDR, val); - break; - } - - CheckForMasterAbort(); - - return PCIBIOS_SUCCESSFUL; -} - -struct pci_ops st40pci_config_ops = { - .read = st40pci_read, - .write = st40pci_write, -}; - - -/* Everything hangs off this */ -static struct pci_bus *pci_root_bus; - -static int __init pcibios_init(void) -{ - extern unsigned long memory_start, memory_end; - - printk(KERN_ALERT "pci-st40.c: pcibios_init\n"); - - if (sh_mv.mv_init_pci != NULL) { - sh_mv.mv_init_pci(); - } - - /* The pci subsytem needs to know where memory is and how much - * of it there is. I've simply made these globals. A better mechanism - * is probably needed. - */ - st40pci_init(PHYSADDR(memory_start), - PHYSADDR(memory_end) - PHYSADDR(memory_start)); - - if (request_irq(ST40PCI_ERR_IRQ, st40_pci_irq, - IRQF_DISABLED, "st40pci", NULL)) { - printk(KERN_ERR "st40pci: Cannot hook interrupt\n"); - return -EIO; - } - - /* Enable the PCI interrupts on the device */ - ST40PCI_WRITE(INTM, ~0); - ST40PCI_WRITE(AINT, ~0); - - /* Map the io address apprioately */ -#ifdef CONFIG_HD64465 - hd64465_port_map(PCIBIOS_MIN_IO, (64 * 1024) - PCIBIOS_MIN_IO + 1, - ST40_IO_ADDR + PCIBIOS_MIN_IO, 0); -#endif - - /* ok, do the scan man */ - pci_root_bus = pci_scan_bus(0, &st40pci_config_ops, NULL); - pci_assign_unassigned_resources(); - - return 0; -} -subsys_initcall(pcibios_init); - -/* - * Publish a region of local address space over the PCI bus - * to other devices. - */ -static void pci_set_rbar_region(unsigned int region, unsigned long localAddr, - unsigned long pciOffset, unsigned long regionSize) -{ - unsigned long mask; - - if (region > 7) - return; - - if (regionSize > (512 * 1024 * 1024)) - return; - - mask = r2p2(regionSize) - 0x10000; - - /* Disable the region (in case currently in use, should never happen) */ - ST40PCI_WRITE_INDEXED(RSR, region, 0); - - /* Start of local address space to publish */ - ST40PCI_WRITE_INDEXED(RLAR, region, PHYSADDR(localAddr) ); - - /* Start of region in PCI address space as an offset from MBAR0 */ - ST40PCI_WRITE_INDEXED(RBAR, region, pciOffset); - - /* Size of region */ - ST40PCI_WRITE_INDEXED(RSR, region, mask | 1); -} - diff --git a/arch/sh/drivers/pci/pci-st40.h b/arch/sh/drivers/pci/pci-st40.h deleted file mode 100644 index cf0d35b..0000000 --- a/arch/sh/drivers/pci/pci-st40.h +++ /dev/null @@ -1,136 +0,0 @@ -/* - * Copyright (C) 2001 David J. Mckay (david.mckay@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Definitions for the ST40 PCI hardware. - */ - -#ifndef __PCI_ST40_H__ -#define __PCI_ST40_H__ - -#define ST40PCI_VCR_STATUS 0x00 - -#define ST40PCI_VCR_VERSION 0x08 - -#define ST40PCI_CR 0x10 - -#define CR_SOFT_RESET (1<<12) -#define CR_PFCS (1<<11) -#define CR_PFE (1<<9) -#define CR_BMAM (1<<6) -#define CR_HOST (1<<5) -#define CR_CLKEN (1<<4) -#define CR_SOCS (1<<3) -#define CR_IOCS (1<<2) -#define CR_RSTCTL (1<<1) -#define CR_CFINT (1<<0) -#define CR_LOCK_MASK 0x5a000000 - - -#define ST40PCI_LSR0 0X14 -#define ST40PCI_LAR0 0x1c - -#define ST40PCI_INT 0x24 -#define INT_MNLTDIM (1<<15) -#define INT_TTADI (1<<14) -#define INT_TMTO (1<<9) -#define INT_MDEI (1<<8) -#define INT_APEDI (1<<7) -#define INT_SDI (1<<6) -#define INT_DPEITW (1<<5) -#define INT_PEDITR (1<<4) -#define INT_TADIM (1<<3) -#define INT_MADIM (1<<2) -#define INT_MWPDI (1<<1) -#define INT_MRDPEI (1<<0) - - -#define ST40PCI_INTM 0x28 -#define ST40PCI_AIR 0x2c - -#define ST40PCI_CIR 0x30 -#define CIR_PIOTEM (1<<31) -#define CIR_RWTET (1<<26) - -#define ST40PCI_AINT 0x40 -#define AINT_MBI (1<<13) -#define AINT_TBTOI (1<<12) -#define AINT_MBTOI (1<<11) -#define AINT_TAI (1<<3) -#define AINT_MAI (1<<2) -#define AINT_RDPEI (1<<1) -#define AINT_WDPE (1<<0) - -#define ST40PCI_AINTM 0x44 -#define ST40PCI_BMIR 0x48 -#define ST40PCI_PAR 0x4c -#define ST40PCI_MBR 0x50 -#define ST40PCI_IOBR 0x54 -#define ST40PCI_PINT 0x58 -#define ST40PCI_PINTM 0x5c -#define ST40PCI_MBMR 0x70 -#define ST40PCI_IOBMR 0x74 -#define ST40PCI_PDR 0x78 - -/* H8 specific registers start here */ -#define ST40PCI_WCBAR 0x7c -#define ST40PCI_LOCCFG_UNLOCK 0x34 - -#define ST40PCI_RBAR0 0x100 -#define ST40PCI_RSR0 0x104 -#define ST40PCI_RLAR0 0x108 - -#define ST40PCI_RBAR1 0x110 -#define ST40PCI_RSR1 0x114 -#define ST40PCI_RLAR1 0x118 - - -#define ST40PCI_RBAR2 0x120 -#define ST40PCI_RSR2 0x124 -#define ST40PCI_RLAR2 0x128 - -#define ST40PCI_RBAR3 0x130 -#define ST40PCI_RSR3 0x134 -#define ST40PCI_RLAR3 0x138 - -#define ST40PCI_RBAR4 0x140 -#define ST40PCI_RSR4 0x144 -#define ST40PCI_RLAR4 0x148 - -#define ST40PCI_RBAR5 0x150 -#define ST40PCI_RSR5 0x154 -#define ST40PCI_RLAR5 0x158 - -#define ST40PCI_RBAR6 0x160 -#define ST40PCI_RSR6 0x164 -#define ST40PCI_RLAR6 0x168 - -#define ST40PCI_RBAR7 0x170 -#define ST40PCI_RSR7 0x174 -#define ST40PCI_RLAR7 0x178 - - -#define ST40PCI_RBAR(n) (0x100+(0x10*(n))) -#define ST40PCI_RSR(n) (0x104+(0x10*(n))) -#define ST40PCI_RLAR(n) (0x108+(0x10*(n))) - -#define ST40PCI_PERF 0x80 -#define PERF_MASTER_WRITE_POSTING (1<<4) -/* H8 specific registers end here */ - - -/* These are configs space registers */ -#define ST40PCI_CSR_VID 0x10000 -#define ST40PCI_CSR_DID 0x10002 -#define ST40PCI_CSR_CMD 0x10004 -#define ST40PCI_CSR_STATUS 0x10006 -#define ST40PCI_CSR_MBAR0 0x10010 -#define ST40PCI_CSR_TRDY 0x10040 -#define ST40PCI_CSR_RETRY 0x10041 -#define ST40PCI_CSR_MIT 0x1000d - -#define ST40_IO_ADDR 0xb6000000 - -#endif /* __PCI_ST40_H__ */ diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile index 1f141a8..4b81d9c 100644 --- a/arch/sh/kernel/Makefile +++ b/arch/sh/kernel/Makefile @@ -10,7 +10,6 @@ obj-y := debugtraps.o io.o io_generic.o irq.o machvec.o process.o ptrace.o \ obj-y += cpu/ timers/ obj-$(CONFIG_VSYSCALL) += vsyscall/ - obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_CF_ENABLER) += cf-enabler.o obj-$(CONFIG_SH_STANDARD_BIOS) += sh_bios.o @@ -22,3 +21,5 @@ obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o obj-$(CONFIG_CRASH_DUMP) += crash_dump.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_STACKTRACE) += stacktrace.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/sh/kernel/cpu/sh3/ex.S b/arch/sh/kernel/cpu/sh3/ex.S index 2b2a9e0..b6abf38 100644 --- a/arch/sh/kernel/cpu/sh3/ex.S +++ b/arch/sh/kernel/cpu/sh3/ex.S @@ -46,7 +46,7 @@ ENTRY(exception_handling_table) .long exception_error ! illegal_slot_instruction (filled by trap_init) /*1A0*/ ENTRY(nmi_slot) #if defined (CONFIG_KGDB_NMI) - .long debug_enter /* 1C0 */ ! Allow trap to debugger + .long kgdb_handle_exception /* 1C0 */ ! Allow trap to debugger #else .long exception_none /* 1C0 */ ! Not implemented yet #endif diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c index 21375d7..bc9c28a 100644 --- a/arch/sh/kernel/cpu/sh4/probe.c +++ b/arch/sh/kernel/cpu/sh4/probe.c @@ -139,14 +139,6 @@ int __init detect_cpu_and_cache_system(void) boot_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER | CPU_HAS_LLSC; break; - case 0x8000: - boot_cpu_data.type = CPU_ST40RA; - boot_cpu_data.flags |= CPU_HAS_FPU; - break; - case 0x8100: - boot_cpu_data.type = CPU_ST40GX1; - boot_cpu_data.flags |= CPU_HAS_FPU; - break; case 0x700: boot_cpu_data.type = CPU_SH4_501; boot_cpu_data.icache.ways = 2; diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c index 348da19..0586bc6 100644 --- a/arch/sh/kernel/irq.c +++ b/arch/sh/kernel/irq.c @@ -11,7 +11,6 @@ #include <linux/module.h> #include <linux/kernel_stat.h> #include <linux/seq_file.h> -#include <linux/irq.h> #include <asm/processor.h> #include <asm/machvec.h> #include <asm/uaccess.h> diff --git a/arch/sh/kernel/kgdb_stub.c b/arch/sh/kernel/kgdb_stub.c index 2fdc700..d453c3a 100644 --- a/arch/sh/kernel/kgdb_stub.c +++ b/arch/sh/kernel/kgdb_stub.c @@ -102,6 +102,7 @@ #include <linux/init.h> #include <linux/console.h> #include <linux/sysrq.h> +#include <linux/module.h> #include <asm/system.h> #include <asm/cacheflush.h> #include <asm/current.h> @@ -116,7 +117,9 @@ kgdb_debug_hook_t *kgdb_debug_hook; kgdb_bus_error_hook_t *kgdb_bus_err_hook; int (*kgdb_getchar)(void); +EXPORT_SYMBOL_GPL(kgdb_getchar); void (*kgdb_putchar)(int); +EXPORT_SYMBOL_GPL(kgdb_putchar); static void put_debug_char(int c) { @@ -136,7 +139,7 @@ static int get_debug_char(void) #define NUMREGBYTES (MAXREG*4) #define OUTBUFMAX (NUMREGBYTES*2+512) -enum regs { +enum { R0 = 0, R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, PC, PR, GBR, VBR, MACH, MACL, SR, @@ -176,9 +179,13 @@ int kgdb_nofault; /* Boolean to ignore bus errs (i.e. in GDB) */ /* SCI/UART settings, used in kgdb_console_setup() */ int kgdb_portnum = CONFIG_KGDB_DEFPORT; +EXPORT_SYMBOL_GPL(kgdb_portnum); int kgdb_baud = CONFIG_KGDB_DEFBAUD; +EXPORT_SYMBOL_GPL(kgdb_baud); char kgdb_parity = CONFIG_KGDB_DEFPARITY; +EXPORT_SYMBOL_GPL(kgdb_parity); char kgdb_bits = CONFIG_KGDB_DEFBITS; +EXPORT_SYMBOL_GPL(kgdb_bits); /* Jump buffer for setjmp/longjmp */ static jmp_buf rem_com_env; diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index 0b8c45d..4156aac 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -303,7 +303,6 @@ static const char *cpu_name[] = { [CPU_SH7750S] = "SH7750S", [CPU_SH7750R] = "SH7750R", [CPU_SH7751] = "SH7751", [CPU_SH7751R] = "SH7751R", [CPU_SH7760] = "SH7760", - [CPU_ST40RA] = "ST40RA", [CPU_ST40GX1] = "ST40GX1", [CPU_SH4_202] = "SH4-202", [CPU_SH4_501] = "SH4-501", [CPU_SH7770] = "SH7770", [CPU_SH7780] = "SH7780", [CPU_SH7781] = "SH7781", [CPU_SH7343] = "SH7343", diff --git a/arch/sh/kernel/sh_ksyms.c b/arch/sh/kernel/sh_ksyms.c index 548e428..e1a6de9 100644 --- a/arch/sh/kernel/sh_ksyms.c +++ b/arch/sh/kernel/sh_ksyms.c @@ -106,7 +106,6 @@ DECLARE_EXPORT(__movmem); DECLARE_EXPORT(__movstr); #endif -#ifdef CONFIG_CPU_SH4 #if __GNUC__ == 4 DECLARE_EXPORT(__movmem_i4_even); DECLARE_EXPORT(__movmem_i4_odd); @@ -126,7 +125,6 @@ DECLARE_EXPORT(__movstr_i4_even); DECLARE_EXPORT(__movstr_i4_odd); DECLARE_EXPORT(__movstrSI12_i4); #endif /* __GNUC__ == 4 */ -#endif #if !defined(CONFIG_CACHE_OFF) && (defined(CONFIG_CPU_SH4) || \ defined(CONFIG_SH7705_CACHE_32KB)) diff --git a/arch/sh/lib/Makefile b/arch/sh/lib/Makefile index e23dd1a..9dc7b69 100644 --- a/arch/sh/lib/Makefile +++ b/arch/sh/lib/Makefile @@ -9,3 +9,5 @@ memcpy-y := memcpy.o memcpy-$(CONFIG_CPU_SH4) := memcpy-sh4.o lib-y += $(memcpy-y) + +EXTRA_CFLAGS += -Werror diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index cf446bb..1265f20 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -17,7 +17,7 @@ config CPU_SH4 bool select CPU_HAS_INTEVT select CPU_HAS_SR_RB - select CPU_HAS_PTEA if (!CPU_SUBTYPE_ST40 && !CPU_SH4A) || CPU_SHX2 + select CPU_HAS_PTEA if !CPU_SH4A || CPU_SHX2 select CPU_HAS_FPU if !CPU_SH4AL_DSP config CPU_SH4A @@ -29,10 +29,6 @@ config CPU_SH4AL_DSP select CPU_SH4A select CPU_HAS_DSP -config CPU_SUBTYPE_ST40 - bool - select CPU_SH4 - config CPU_SHX2 bool @@ -152,21 +148,6 @@ config CPU_SUBTYPE_SH4_202 bool "Support SH4-202 processor" select CPU_SH4 -# ST40 Processor Support - -config CPU_SUBTYPE_ST40STB1 - bool "Support ST40STB1/ST40RA processors" - select CPU_SUBTYPE_ST40 - help - Select ST40STB1 if you have a ST40RA CPU. - This was previously called the ST40STB1, hence the option name. - -config CPU_SUBTYPE_ST40GX1 - bool "Support ST40GX1 processor" - select CPU_SUBTYPE_ST40 - help - Select ST40GX1 if you have a ST40GX1 CPU. - # SH-4A Processor Support config CPU_SUBTYPE_SH7770 diff --git a/arch/sh/mm/Makefile b/arch/sh/mm/Makefile index ee30fb4..aa44607 100644 --- a/arch/sh/mm/Makefile +++ b/arch/sh/mm/Makefile @@ -33,3 +33,5 @@ endif obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o obj-$(CONFIG_32BIT) += pmb.o obj-$(CONFIG_NUMA) += numa.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/sh/mm/clear_page.S b/arch/sh/mm/clear_page.S index 8a70613..7a7c81e 100644 --- a/arch/sh/mm/clear_page.S +++ b/arch/sh/mm/clear_page.S @@ -150,48 +150,3 @@ ENTRY(__clear_user) .long 8b, .Lbad_clear_user .long 9b, .Lbad_clear_user .previous - -#if defined(CONFIG_CPU_SH4) -/* - * __clear_user_page - * @to: P3 address (with same color) - * @orig_to: P1 address - * - * void __clear_user_page(void *to, void *orig_to) - */ - -/* - * r0 --- scratch - * r4 --- to - * r5 --- orig_to - * r6 --- to + PAGE_SIZE - */ -ENTRY(__clear_user_page) - mov.l .Lpsz,r0 - mov r4,r6 - add r0,r6 - mov #0,r0 - ! -1: ocbi @r5 - add #32,r5 - movca.l r0,@r4 - mov r4,r1 - add #32,r4 - mov.l r0,@-r4 - mov.l r0,@-r4 - mov.l r0,@-r4 - mov.l r0,@-r4 - mov.l r0,@-r4 - mov.l r0,@-r4 - mov.l r0,@-r4 - add #28,r4 - cmp/eq r6,r4 - bf/s 1b - ocbwb @r1 - ! - rts - nop -.Lpsz: .long PAGE_SIZE - -#endif - diff --git a/arch/sh/mm/copy_page.S b/arch/sh/mm/copy_page.S index 3d8409d..4068501 100644 --- a/arch/sh/mm/copy_page.S +++ b/arch/sh/mm/copy_page.S @@ -68,67 +68,6 @@ ENTRY(copy_page_slow) rts nop -#if defined(CONFIG_CPU_SH4) -/* - * __copy_user_page - * @to: P1 address (with same color) - * @from: P1 address - * @orig_to: P1 address - * - * void __copy_user_page(void *to, void *from, void *orig_to) - */ - -/* - * r0, r1, r2, r3, r4, r5, r6, r7 --- scratch - * r8 --- from + PAGE_SIZE - * r9 --- orig_to - * r10 --- to - * r11 --- from - */ -ENTRY(__copy_user_page) - mov.l r8,@-r15 - mov.l r9,@-r15 - mov.l r10,@-r15 - mov.l r11,@-r15 - mov r4,r10 - mov r5,r11 - mov r6,r9 - mov r5,r8 - mov.l .Lpsz,r0 - add r0,r8 - ! -1: ocbi @r9 - add #32,r9 - mov.l @r11+,r0 - mov.l @r11+,r1 - mov.l @r11+,r2 - mov.l @r11+,r3 - mov.l @r11+,r4 - mov.l @r11+,r5 - mov.l @r11+,r6 - mov.l @r11+,r7 - movca.l r0,@r10 - mov r10,r0 - add #32,r10 - mov.l r7,@-r10 - mov.l r6,@-r10 - mov.l r5,@-r10 - mov.l r4,@-r10 - mov.l r3,@-r10 - mov.l r2,@-r10 - mov.l r1,@-r10 - ocbwb @r0 - cmp/eq r11,r8 - bf/s 1b - add #28,r10 - ! - mov.l @r15+,r11 - mov.l @r15+,r10 - mov.l @r15+,r9 - mov.l @r15+,r8 - rts - nop -#endif .align 2 .Lpsz: .long PAGE_SIZE /* diff --git a/arch/sh/mm/pg-sh4.c b/arch/sh/mm/pg-sh4.c index 25f5c6f..8c7a9ca 100644 --- a/arch/sh/mm/pg-sh4.c +++ b/arch/sh/mm/pg-sh4.c @@ -9,6 +9,8 @@ #include <linux/mm.h> #include <linux/mutex.h> #include <linux/fs.h> +#include <linux/highmem.h> +#include <linux/module.h> #include <asm/mmu_context.h> #include <asm/cacheflush.h> @@ -50,34 +52,61 @@ static inline void kunmap_coherent(struct page *page) void clear_user_page(void *to, unsigned long address, struct page *page) { __set_bit(PG_mapped, &page->flags); - if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0) - clear_page(to); - else { - void *vto = kmap_coherent(page, address); - __clear_user_page(vto, to); - kunmap_coherent(vto); - } + + clear_page(to); + if ((((address & PAGE_MASK) ^ (unsigned long)to) & CACHE_ALIAS)) + __flush_wback_region(to, PAGE_SIZE); } -/* - * copy_user_page - * @to: P1 address - * @from: P1 address - * @address: U0 address to be mapped - * @page: page (virt_to_page(to)) - */ -void copy_user_page(void *to, void *from, unsigned long address, - struct page *page) +void copy_to_user_page(struct vm_area_struct *vma, struct page *page, + unsigned long vaddr, void *dst, const void *src, + unsigned long len) { + void *vto; + __set_bit(PG_mapped, &page->flags); - if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0) - copy_page(to, from); - else { - void *vfrom = kmap_coherent(page, address); - __copy_user_page(vfrom, from, to); - kunmap_coherent(vfrom); - } + + vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK); + memcpy(vto, src, len); + kunmap_coherent(vto); + + if (vma->vm_flags & VM_EXEC) + flush_cache_page(vma, vaddr, page_to_pfn(page)); +} + +void copy_from_user_page(struct vm_area_struct *vma, struct page *page, + unsigned long vaddr, void *dst, const void *src, + unsigned long len) +{ + void *vfrom; + + __set_bit(PG_mapped, &page->flags); + + vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK); + memcpy(dst, vfrom, len); + kunmap_coherent(vfrom); +} + +void copy_user_highpage(struct page *to, struct page *from, + unsigned long vaddr, struct vm_area_struct *vma) +{ + void *vfrom, *vto; + + __set_bit(PG_mapped, &to->flags); + + vto = kmap_atomic(to, KM_USER1); + vfrom = kmap_coherent(from, vaddr); + copy_page(vto, vfrom); + kunmap_coherent(vfrom); + + if (((vaddr ^ (unsigned long)vto) & CACHE_ALIAS)) + __flush_wback_region(vto, PAGE_SIZE); + + kunmap_atomic(vto, KM_USER1); + /* Make sure this page is cleared on other CPU's too before using it */ + smp_wmb(); } +EXPORT_SYMBOL(copy_user_highpage); /* * For SH-4, we have our own implementation for ptep_get_and_clear diff --git a/arch/sh/oprofile/Makefile b/arch/sh/oprofile/Makefile index 1f25d9b..2efc2e7 100644 --- a/arch/sh/oprofile/Makefile +++ b/arch/sh/oprofile/Makefile @@ -15,3 +15,4 @@ profdrvr-$(CONFIG_CPU_SUBTYPE_SH7091) := op_model_sh7750.o oprofile-y := $(DRIVER_OBJS) $(profdrvr-y) +EXTRA_CFLAGS += -Werror diff --git a/arch/sh64/kernel/process.c b/arch/sh64/kernel/process.c index ceb9458..0761af4 100644 --- a/arch/sh64/kernel/process.c +++ b/arch/sh64/kernel/process.c @@ -26,6 +26,7 @@ #include <linux/reboot.h> #include <linux/init.h> #include <linux/module.h> +#include <linux/proc_fs.h> #include <asm/uaccess.h> #include <asm/pgtable.h> @@ -656,9 +657,6 @@ unsigned long get_wchan(struct task_struct *p) */ #if defined(CONFIG_SH64_PROC_ASIDS) -#include <linux/init.h> -#include <linux/proc_fs.h> - static int asids_proc_info(char *buf, char **start, off_t fpos, int length, int *eof, void *data) { @@ -686,10 +684,8 @@ asids_proc_info(char *buf, char **start, off_t fpos, int length, int *eof, void static int __init register_proc_asids(void) { - create_proc_read_entry("asids", 0, NULL, asids_proc_info, NULL); - return 0; + create_proc_read_entry("asids", 0, NULL, asids_proc_info, NULL); + return 0; } - __initcall(register_proc_asids); #endif - diff --git a/arch/sh64/kernel/traps.c b/arch/sh64/kernel/traps.c index c03101f..f32df38 100644 --- a/arch/sh64/kernel/traps.c +++ b/arch/sh64/kernel/traps.c @@ -30,7 +30,6 @@ #include <linux/interrupt.h> #include <linux/sysctl.h> #include <linux/module.h> - #include <asm/system.h> #include <asm/uaccess.h> #include <asm/io.h> @@ -242,9 +241,6 @@ DO_ERROR(12, SIGILL, "reserved instruction", reserved_inst, current) #endif /* CONFIG_SH64_ID2815_WORKAROUND */ - -#include <asm/system.h> - /* Called with interrupts disabled */ asmlinkage void do_exception_error(unsigned long ex, struct pt_regs *regs) { @@ -984,4 +980,3 @@ asmlinkage void do_debug_interrupt(unsigned long code, struct pt_regs *regs) /* Clear all DEBUGINT causes */ poke_real_address_q(DM_EXP_CAUSE_PHY, 0x0); } - |
