diff options
Diffstat (limited to 'arch')
154 files changed, 23532 insertions, 3662 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 331483a..28004f0 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -47,7 +47,7 @@ config PPC config EARLY_PRINTK bool - default y if PPC64 + default y config COMPAT bool @@ -297,6 +297,7 @@ config PPC_PMAC64 bool depends on PPC_PMAC && POWER4 select U3_DART + select MPIC_BROKEN_U3 select GENERIC_TBSYNC default y @@ -325,9 +326,7 @@ config PPC_CELL select MMIO_NVRAM config PPC_OF - bool - depends on PPC_MULTIPLATFORM # for now - default y + def_bool y config XICS depends on PPC_PSERIES @@ -376,11 +375,28 @@ config CELL_IIC bool default y +config CRASH_DUMP + bool "kernel crash dumps (EXPERIMENTAL)" + depends on PPC_MULTIPLATFORM + depends on EXPERIMENTAL + help + Build a kernel suitable for use as a kdump capture kernel. + The kernel will be linked at a different address than normal, and + so can only be used for Kdump. + + Don't change this unless you know what you are doing. + config IBMVIO depends on PPC_PSERIES || PPC_ISERIES bool default y +config IBMEBUS + depends on PPC_PSERIES + bool "Support for GX bus based adapters" + help + Bus device driver for GX bus based adapters. + config PPC_MPC106 bool default n @@ -472,6 +488,7 @@ source arch/powerpc/platforms/embedded6xx/Kconfig source arch/powerpc/platforms/4xx/Kconfig source arch/powerpc/platforms/85xx/Kconfig source arch/powerpc/platforms/8xx/Kconfig +source arch/powerpc/platforms/cell/Kconfig menu "Kernel options" @@ -575,11 +592,12 @@ config ARCH_SELECT_MEMORY_MODEL depends on PPC64 config ARCH_FLATMEM_ENABLE - def_bool y - depends on PPC64 && !NUMA + def_bool y + depends on (PPC64 && !NUMA) || PPC32 config ARCH_SPARSEMEM_ENABLE def_bool y + depends on PPC64 config ARCH_SPARSEMEM_DEFAULT def_bool y diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index a13eb57..5f80e58 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -151,7 +151,7 @@ CPPFLAGS_vmlinux.lds := -Upowerpc # All the instructions talk about "make bzImage". bzImage: zImage -BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm +BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm uImage .PHONY: $(BOOT_TARGETS) diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 9770f58..22726ae 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -143,6 +143,36 @@ $(obj)/zImage.initrd: $(obj)/zImage.initrd.vmode $(obj)/addnote @cp -f $< $@ $(call if_changed,addnote) +#----------------------------------------------------------- +# build u-boot images +#----------------------------------------------------------- +quiet_cmd_mygzip = GZIP $@ +cmd_mygzip = gzip -f -9 < $< > $@.$$$$ && mv $@.$$$$ $@ + +quiet_cmd_objbin = OBJCOPY $@ + cmd_objbin = $(OBJCOPY) -O binary $< $@ + +quiet_cmd_uimage = UIMAGE $@ + cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A ppc -O linux -T kernel \ + -C gzip -a 00000000 -e 00000000 -n 'Linux-$(KERNELRELEASE)' \ + -d $< $@ + +MKIMAGE := $(srctree)/scripts/mkuboot.sh +targets += uImage +extra-y += vmlinux.bin vmlinux.gz + +$(obj)/vmlinux.bin: vmlinux FORCE + $(call if_changed,objbin) + +$(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE + $(call if_changed,mygzip) + +$(obj)/uImage: $(obj)/vmlinux.gz + $(Q)rm -f $@ + $(call cmd,uimage) + @echo -n ' Image: $@ ' + @if [ -f $@ ]; then echo 'is ready' ; else echo 'not made'; fi + install: $(CONFIGURE) $(BOOTIMAGE) sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" "$(BOOTIMAGE)" diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig new file mode 100644 index 0000000..398203b --- /dev/null +++ b/arch/powerpc/configs/pmac32_defconfig @@ -0,0 +1,1729 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.15-rc5 +# Tue Dec 13 17:24:05 2005 +# +# CONFIG_PPC64 is not set +CONFIG_PPC32=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y + +# +# Processor support +# +CONFIG_6xx=y +# CONFIG_PPC_52xx is not set +# CONFIG_PPC_82xx is not set +# CONFIG_PPC_83xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_8xx is not set +# CONFIG_E200 is not set +# CONFIG_E500 is not set +CONFIG_PPC_FPU=y +CONFIG_ALTIVEC=y +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_SMP is not set + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_LBD=y + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# Platform support +# +CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_PPC_ISERIES is not set +# CONFIG_EMBEDDED6xx is not set +# CONFIG_APUS is not set +# CONFIG_PPC_CHRP is not set +CONFIG_PPC_PMAC=y +CONFIG_PPC_OF=y +CONFIG_MPIC=y +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_CRASH_DUMP is not set +CONFIG_PPC_MPC106=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_PMAC=y +CONFIG_PPC601_SYNC_FIX=y +# CONFIG_TAU is not set +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_MISC=m +# CONFIG_KEXEC is not set +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +CONFIG_PM_DEBUG=y +CONFIG_SOFTWARE_SUSPEND=y +CONFIG_PM_STD_PARTITION="" +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_PPC_I8259 is not set +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_LEGACY_PROC=y +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +CONFIG_PCCARD=m +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=m +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y +CONFIG_CARDBUS=y + +# +# PC-card bridges +# +CONFIG_YENTA=m +# CONFIG_PD6729 is not set +# CONFIG_I82092 is not set +CONFIG_PCCARD_NONSTATIC=m + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +# CONFIG_IP_NF_CT_ACCT is not set +# CONFIG_IP_NF_CONNTRACK_MARK is not set +# CONFIG_IP_NF_CONNTRACK_EVENTS is not set +# CONFIG_IP_NF_CT_PROTO_SCTP is not set +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +CONFIG_IP_NF_NETBIOS_NS=m +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +CONFIG_IP_NF_PPTP=m +# CONFIG_IP_NF_QUEUE is not set +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +# CONFIG_IP_NF_MATCH_ADDRTYPE is not set +# CONFIG_IP_NF_MATCH_REALM is not set +# CONFIG_IP_NF_MATCH_SCTP is not set +CONFIG_IP_NF_MATCH_DCCP=m +# CONFIG_IP_NF_MATCH_COMMENT is not set +# CONFIG_IP_NF_MATCH_HASHLIMIT is not set +CONFIG_IP_NF_MATCH_STRING=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +# CONFIG_IP_NF_TARGET_LOG is not set +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +# CONFIG_IP_NF_TARGET_NFQUEUE is not set +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_NAT_PPTP=m +# CONFIG_IP_NF_MANGLE is not set +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_TARGET_NOTRACK=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# DCCP Configuration (EXPERIMENTAL) +# +CONFIG_IP_DCCP=m +CONFIG_INET_DCCP_DIAG=m + +# +# DCCP CCIDs Configuration (EXPERIMENTAL) +# +CONFIG_IP_DCCP_CCID3=m +CONFIG_IP_DCCP_TFRC_LIB=m + +# +# DCCP Kernel Hacking +# +# CONFIG_IP_DCCP_DEBUG is not set +# CONFIG_IP_DCCP_UNLOAD_HACK is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRNET=m +CONFIG_IRCOMM=m +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +CONFIG_IRDA_CACHE_LAST_LSAP=y +CONFIG_IRDA_FAST_RR=y +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +CONFIG_IRTTY_SIR=m + +# +# Dongle support +# +# CONFIG_DONGLE is not set + +# +# Old SIR device drivers +# +# CONFIG_IRPORT_SIR is not set + +# +# Old Serial dongle support +# + +# +# FIR device drivers +# +# CONFIG_USB_IRDA is not set +# CONFIG_SIGMATEL_FIR is not set +# CONFIG_NSC_FIR is not set +# CONFIG_WINBOND_FIR is not set +# CONFIG_TOSHIBA_FIR is not set +# CONFIG_SMC_IRCC_FIR is not set +# CONFIG_ALI_FIR is not set +# CONFIG_VLSI_FIR is not set +# CONFIG_VIA_FIR is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIUSB=m +# CONFIG_BT_HCIUSB_SCO is not set +# CONFIG_BT_HCIUART is not set +CONFIG_BT_HCIBCM203X=m +# CONFIG_BT_HCIBPA10X is not set +CONFIG_BT_HCIBFUSB=m +# CONFIG_BT_HCIDTL1 is not set +# CONFIG_BT_HCIBT3C is not set +# CONFIG_BT_HCIBLUECARD is not set +# CONFIG_BT_HCIBTUART is not set +# CONFIG_BT_HCIVHCI is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m + +# +# Device Drivers +# + +# +# Generic Driver Options +# +# CONFIG_STANDALONE is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +CONFIG_MAC_FLOPPY=y +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_UB=m +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECS=m +CONFIG_BLK_DEV_IDECD=y +# CONFIG_BLK_DEV_IDETAPE is not set +CONFIG_BLK_DEV_IDEFLOPPY=y +CONFIG_BLK_DEV_IDESCSI=y +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +# CONFIG_IDE_GENERIC is not set +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +CONFIG_BLK_DEV_SL82C105=y +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +CONFIG_BLK_DEV_PDC202XX_NEW=y +# CONFIG_PDC202XX_FORCE is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +CONFIG_BLK_DEV_IDE_PMAC=y +CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y +CONFIG_BLK_DEV_IDEDMA_PMAC=y +CONFIG_BLK_DEV_IDE_PMAC_BLINK=y +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +CONFIG_SCSI_CONSTANTS=y +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +CONFIG_SCSI_AIC7XXX=m +CONFIG_AIC7XXX_CMDS_PER_DEVICE=253 +CONFIG_AIC7XXX_RESET_DELAY_MS=15000 +CONFIG_AIC7XXX_DEBUG_ENABLE=y +CONFIG_AIC7XXX_DEBUG_MASK=0 +CONFIG_AIC7XXX_REG_PRETTY_PRINT=y +CONFIG_SCSI_AIC7XXX_OLD=m +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +CONFIG_SCSI_SYM53C8XX_2=y +CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 +CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 +CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 +# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +CONFIG_SCSI_QLA2XXX=y +# CONFIG_SCSI_QLA21XX is not set +# CONFIG_SCSI_QLA22XX is not set +# CONFIG_SCSI_QLA2300 is not set +# CONFIG_SCSI_QLA2322 is not set +# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +CONFIG_SCSI_MESH=y +CONFIG_SCSI_MESH_SYNC_RATE=5 +CONFIG_SCSI_MESH_RESET_DELAY_MS=1000 +CONFIG_SCSI_MAC53C94=y + +# +# PCMCIA SCSI adapter support +# +# CONFIG_PCMCIA_AHA152X is not set +# CONFIG_PCMCIA_FDOMAIN is not set +# CONFIG_PCMCIA_NINJA_SCSI is not set +# CONFIG_PCMCIA_QLOGIC is not set +# CONFIG_PCMCIA_SYM53C500 is not set + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +# CONFIG_MD_RAID10 is not set +CONFIG_MD_RAID5=m +CONFIG_MD_RAID6=m +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=m +CONFIG_DM_CRYPT=m +# CONFIG_DM_SNAPSHOT is not set +# CONFIG_DM_MIRROR is not set +# CONFIG_DM_ZERO is not set +# CONFIG_DM_MULTIPATH is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +CONFIG_IEEE1394=m + +# +# Subsystem Options +# +# CONFIG_IEEE1394_VERBOSEDEBUG is not set +# CONFIG_IEEE1394_OUI_DB is not set +CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y +CONFIG_IEEE1394_CONFIG_ROM_IP1394=y +# CONFIG_IEEE1394_EXPORT_FULL_API is not set + +# +# Device Drivers +# +# CONFIG_IEEE1394_PCILYNX is not set +CONFIG_IEEE1394_OHCI1394=m + +# +# Protocol Drivers +# +CONFIG_IEEE1394_VIDEO1394=m +CONFIG_IEEE1394_SBP2=m +# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set +CONFIG_IEEE1394_ETH1394=m +CONFIG_IEEE1394_DV1394=m +CONFIG_IEEE1394_RAWIO=m +# CONFIG_IEEE1394_CMP is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +CONFIG_ADB=y +CONFIG_ADB_CUDA=y +CONFIG_ADB_PMU=y +CONFIG_PMAC_APM_EMU=y +CONFIG_PMAC_MEDIABAY=y +CONFIG_PMAC_BACKLIGHT=y +CONFIG_INPUT_ADBHID=y +CONFIG_MAC_EMUMOUSEBTN=y +CONFIG_THERM_WINDTUNNEL=m +CONFIG_THERM_ADT746X=m +# CONFIG_WINDFARM is not set +# CONFIG_ANSLCD is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_MACE=y +# CONFIG_MACE_AAUI_PORT is not set +CONFIG_BMAC=y +# CONFIG_HAPPYMEAL is not set +CONFIG_SUNGEM=y +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +CONFIG_PCNET32=y +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_MV643XX_ETH is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +CONFIG_NET_RADIO=y + +# +# Obsolete Wireless cards support (pre-802.11) +# +# CONFIG_STRIP is not set +# CONFIG_PCMCIA_WAVELAN is not set +# CONFIG_PCMCIA_NETWAVE is not set + +# +# Wireless 802.11 Frequency Hopping cards support +# +# CONFIG_PCMCIA_RAYCS is not set + +# +# Wireless 802.11b ISA/PCI cards support +# +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_AIRO is not set +CONFIG_HERMES=m +CONFIG_APPLE_AIRPORT=m +# CONFIG_PLX_HERMES is not set +# CONFIG_TMD_HERMES is not set +# CONFIG_NORTEL_HERMES is not set +# CONFIG_PCI_HERMES is not set +# CONFIG_ATMEL is not set + +# +# Wireless 802.11b Pcmcia/Cardbus cards support +# +# CONFIG_PCMCIA_HERMES is not set +# CONFIG_PCMCIA_SPECTRUM is not set +# CONFIG_AIRO_CS is not set +# CONFIG_PCMCIA_WL3501 is not set + +# +# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support +# +CONFIG_PRISM54=m +# CONFIG_HOSTAP is not set +CONFIG_NET_WIRELESS=y + +# +# PCMCIA network device support +# +# CONFIG_NET_PCMCIA is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PPP=y +CONFIG_PPP_MULTILINK=y +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=y +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=y +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +CONFIG_INPUT_MOUSE=y +# CONFIG_MOUSE_PS2 is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=m +# CONFIG_SERIAL_8250_CS is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=m +# CONFIG_SERIAL_PMACZILOG is not set +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +CONFIG_NVRAM=y +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +CONFIG_AGP=m +CONFIG_AGP_UNINORTH=m +CONFIG_DRM=m +# CONFIG_DRM_TDFX is not set +CONFIG_DRM_R128=m +CONFIG_DRM_RADEON=m +# CONFIG_DRM_MGA is not set +# CONFIG_DRM_SIS is not set +# CONFIG_DRM_VIA is not set +# CONFIG_DRM_SAVAGE is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=m + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_KEYWEST=m +# CONFIG_I2C_MPC is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_MACMODES=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +CONFIG_FB_OF=y +CONFIG_FB_CONTROL=y +CONFIG_FB_PLATINUM=y +CONFIG_FB_VALKYRIE=y +CONFIG_FB_CT65550=y +# CONFIG_FB_ASILIANT is not set +CONFIG_FB_IMSTT=y +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_NVIDIA=y +CONFIG_FB_NVIDIA_I2C=y +# CONFIG_FB_RIVA is not set +CONFIG_FB_MATROX=y +CONFIG_FB_MATROX_MILLENIUM=y +CONFIG_FB_MATROX_MYSTIQUE=y +# CONFIG_FB_MATROX_G is not set +# CONFIG_FB_MATROX_I2C is not set +# CONFIG_FB_MATROX_MULTIHEAD is not set +# CONFIG_FB_RADEON_OLD is not set +CONFIG_FB_RADEON=y +CONFIG_FB_RADEON_I2C=y +# CONFIG_FB_RADEON_DEBUG is not set +CONFIG_FB_ATY128=y +CONFIG_FB_ATY=y +CONFIG_FB_ATY_CT=y +# CONFIG_FB_ATY_GENERIC_LCD is not set +# CONFIG_FB_ATY_XL_INIT is not set +CONFIG_FB_ATY_GX=y +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +CONFIG_FB_3DFX=y +# CONFIG_FB_3DFX_ACCEL is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_CYBLA is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y + +# +# Logo configuration +# +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +CONFIG_SOUND=m +CONFIG_DMASOUND_PMAC=m +CONFIG_DMASOUND=m + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_HWDEP=m +CONFIG_SND_RAWMIDI=m +CONFIG_SND_SEQUENCER=m +CONFIG_SND_SEQ_DUMMY=m +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_GENERIC_DRIVER=y + +# +# Generic devices +# +CONFIG_SND_DUMMY=m +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# PCI devices +# +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_YMFPCI is not set +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_HDA_INTEL is not set + +# +# ALSA PowerMac devices +# +CONFIG_SND_POWERMAC=m +# CONFIG_SND_POWERMAC_AUTO_DRC is not set + +# +# USB devices +# +CONFIG_SND_USB_AUDIO=m +# CONFIG_SND_USB_USX2Y is not set + +# +# PCMCIA devices +# + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +CONFIG_USB_DYNAMIC_MINORS=y +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_STORAGE is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +CONFIG_USB_HIDINPUT=y +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +CONFIG_USB_APPLETOUCH=y + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=m +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +# CONFIG_USB_NET_CDC_SUBSET is not set +CONFIG_USB_NET_ZAURUS=m +# CONFIG_USB_ZD1201 is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=m +# CONFIG_USB_SERIAL_GENERIC is not set +# CONFIG_USB_SERIAL_AIRPRIME is not set +# CONFIG_USB_SERIAL_ANYDATA is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP2101 is not set +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_EMPEG is not set +# CONFIG_USB_SERIAL_FTDI_SIO is not set +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +CONFIG_USB_SERIAL_KEYSPAN_MPR=y +CONFIG_USB_SERIAL_KEYSPAN_USA28=y +CONFIG_USB_SERIAL_KEYSPAN_USA28X=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y +CONFIG_USB_SERIAL_KEYSPAN_USA19=y +CONFIG_USB_SERIAL_KEYSPAN_USA18X=y +CONFIG_USB_SERIAL_KEYSPAN_USA19W=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y +CONFIG_USB_SERIAL_KEYSPAN_USA49W=y +CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OPTION is not set +# CONFIG_USB_SERIAL_OMNINET is not set +CONFIG_USB_EZUSB=y + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +CONFIG_FUSE_FS=m + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_ZISOFS_FS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +CONFIG_RELAYFS_FS=m + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +CONFIG_HFS_FS=m +CONFIG_HFSPLUS_FS=m +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=y +# CONFIG_NFSD_V3 is not set +# CONFIG_NFSD_TCP is not set +CONFIG_LOCKD=y +CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m + +# +# Library routines +# +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m + +# +# Instrumentation Support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_MAGIC_SYSRQ is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_DEBUGGER=y +CONFIG_XMON=y +CONFIG_XMON_DEFAULT=y +# CONFIG_BDI_SWITCH is not set +CONFIG_BOOTX_TEXT=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 9ed551b..6e03b59 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -17,11 +17,11 @@ obj-y += vdso32/ obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \ signal_64.o ptrace32.o systbl.o \ paca.o ioctl32.o cpu_setup_power4.o \ - firmware.o sysfs.o udbg.o idle_64.o + firmware.o sysfs.o idle_64.o obj-$(CONFIG_PPC64) += vdso64/ obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o obj-$(CONFIG_POWER4) += idle_power4.o -obj-$(CONFIG_PPC_OF) += of_device.o +obj-$(CONFIG_PPC_OF) += of_device.o prom_parse.o procfs-$(CONFIG_PPC64) := proc_ppc64.o obj-$(CONFIG_PROC_FS) += $(procfs-y) rtaspci-$(CONFIG_PPC64) := rtas_pci.o @@ -30,12 +30,10 @@ obj-$(CONFIG_RTAS_FLASH) += rtas_flash.o obj-$(CONFIG_RTAS_PROC) += rtas-proc.o obj-$(CONFIG_LPARCFG) += lparcfg.o obj-$(CONFIG_IBMVIO) += vio.o +obj-$(CONFIG_IBMEBUS) += ibmebus.o obj-$(CONFIG_GENERIC_TBSYNC) += smp-tbsync.o -obj-$(CONFIG_PPC_PSERIES) += udbg_16550.o -obj-$(CONFIG_PPC_MAPLE) += udbg_16550.o -udbgscc-$(CONFIG_PPC64) := udbg_scc.o -obj-$(CONFIG_PPC_PMAC) += $(udbgscc-y) obj64-$(CONFIG_PPC_MULTIPLATFORM) += nvram_64.o +obj-$(CONFIG_CRASH_DUMP) += crash_dump.o ifeq ($(CONFIG_PPC_MERGE),y) @@ -48,25 +46,25 @@ extra-$(CONFIG_8xx) := head_8xx.o extra-y += vmlinux.lds obj-y += process.o init_task.o time.o \ - prom.o traps.o setup-common.o + prom.o traps.o setup-common.o udbg.o obj-$(CONFIG_PPC32) += entry_32.o setup_32.o misc_32.o systbl.o obj-$(CONFIG_PPC64) += misc_64.o dma_64.o iommu.o -obj-$(CONFIG_PPC_OF) += prom_init.o +obj-$(CONFIG_PPC_MULTIPLATFORM) += prom_init.o obj-$(CONFIG_MODULES) += ppc_ksyms.o obj-$(CONFIG_BOOTX_TEXT) += btext.o obj-$(CONFIG_6xx) += idle_6xx.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_KPROBES) += kprobes.o - +obj-$(CONFIG_SERIAL_8250) += legacy_serial.o udbg_16550.o module-$(CONFIG_PPC64) += module_64.o obj-$(CONFIG_MODULES) += $(module-y) pci64-$(CONFIG_PPC64) += pci_64.o pci_dn.o pci_iommu.o \ pci_direct_iommu.o iomap.o obj-$(CONFIG_PCI) += $(pci64-y) - -kexec64-$(CONFIG_PPC64) += machine_kexec_64.o -obj-$(CONFIG_KEXEC) += $(kexec64-y) +kexec-$(CONFIG_PPC64) := machine_kexec_64.o +kexec-$(CONFIG_PPC32) := machine_kexec_32.o +obj-$(CONFIG_KEXEC) += machine_kexec.o crash.o $(kexec-y) ifeq ($(CONFIG_PPC_ISERIES),y) $(obj)/head_64.o: $(obj)/lparmap.s diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 91538d2..56399c5 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -92,9 +92,9 @@ int main(void) DEFINE(TI_FLAGS, offsetof(struct thread_info, flags)); DEFINE(TI_PREEMPT, offsetof(struct thread_info, preempt_count)); - DEFINE(TI_SC_NOERR, offsetof(struct thread_info, syscall_noerror)); -#ifdef CONFIG_PPC32 + DEFINE(TI_SIGFRAME, offsetof(struct thread_info, nvgprs_frame)); DEFINE(TI_TASK, offsetof(struct thread_info, task)); +#ifdef CONFIG_PPC32 DEFINE(TI_EXECDOMAIN, offsetof(struct thread_info, exec_domain)); DEFINE(TI_CPU, offsetof(struct thread_info, cpu)); #endif /* CONFIG_PPC32 */ @@ -131,11 +131,9 @@ int main(void) DEFINE(PACALOWHTLBAREAS, offsetof(struct paca_struct, context.low_htlb_areas)); DEFINE(PACAHIGHHTLBAREAS, offsetof(struct paca_struct, context.high_htlb_areas)); #endif /* CONFIG_HUGETLB_PAGE */ - DEFINE(PACADEFAULTDECR, offsetof(struct paca_struct, default_decr)); DEFINE(PACA_EXGEN, offsetof(struct paca_struct, exgen)); DEFINE(PACA_EXMC, offsetof(struct paca_struct, exmc)); DEFINE(PACA_EXSLB, offsetof(struct paca_struct, exslb)); - DEFINE(PACA_EXDSI, offsetof(struct paca_struct, exdsi)); DEFINE(PACAEMERGSP, offsetof(struct paca_struct, emergency_sp)); DEFINE(PACALPPACA, offsetof(struct paca_struct, lppaca)); DEFINE(PACAHWCPUID, offsetof(struct paca_struct, hw_cpu_id)); diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c index bdfba92..6223d39 100644 --- a/arch/powerpc/kernel/btext.c +++ b/arch/powerpc/kernel/btext.c @@ -31,15 +31,18 @@ static void draw_byte_32(unsigned char *bits, unsigned int *base, int rb); static void draw_byte_16(unsigned char *bits, unsigned int *base, int rb); static void draw_byte_8(unsigned char *bits, unsigned int *base, int rb); -static int g_loc_X; -static int g_loc_Y; -static int g_max_loc_X; -static int g_max_loc_Y; +#define __force_data __attribute__((__section__(".data"))) -static int dispDeviceRowBytes; -static int dispDeviceDepth; -static int dispDeviceRect[4]; -static unsigned char *dispDeviceBase, *logicalDisplayBase; +static int g_loc_X __force_data; +static int g_loc_Y __force_data; +static int g_max_loc_X __force_data; +static int g_max_loc_Y __force_data; + +static int dispDeviceRowBytes __force_data; +static int dispDeviceDepth __force_data; +static int dispDeviceRect[4] __force_data; +static unsigned char *dispDeviceBase __force_data; +static unsigned char *logicalDisplayBase __force_data; unsigned long disp_BAT[2] __initdata = {0, 0}; @@ -47,7 +50,7 @@ unsigned long disp_BAT[2] __initdata = {0, 0}; static unsigned char vga_font[cmapsz]; -int boot_text_mapped; +int boot_text_mapped __force_data = 0; int force_printk_to_btext = 0; #ifdef CONFIG_PPC32 @@ -57,7 +60,7 @@ int force_printk_to_btext = 0; * * The display is mapped to virtual address 0xD0000000, rather * than 1:1, because some some CHRP machines put the frame buffer - * in the region starting at 0xC0000000 (KERNELBASE). + * in the region starting at 0xC0000000 (PAGE_OFFSET). * This mapping is temporary and will disappear as soon as the * setup done by MMU_Init() is applied. * @@ -66,10 +69,9 @@ int force_printk_to_btext = 0; * is really badly aligned, but I didn't encounter this case * yet. */ -void __init -btext_prepare_BAT(void) +void __init btext_prepare_BAT(void) { - unsigned long vaddr = KERNELBASE + 0x10000000; + unsigned long vaddr = PAGE_OFFSET + 0x10000000; unsigned long addr; unsigned long lowbits; @@ -95,12 +97,13 @@ btext_prepare_BAT(void) } #endif -/* This function will enable the early boot text when doing OF booting. This - * way, xmon output should work too + +/* This function can be used to enable the early boot text when doing + * OF booting or within bootx init. It must be followed by a btext_unmap() + * call before the logical address becomes unuseable */ -void __init -btext_setup_display(int width, int height, int depth, int pitch, - unsigned long address) +void __init btext_setup_display(int width, int height, int depth, int pitch, + unsigned long address) { g_loc_X = 0; g_loc_Y = 0; @@ -116,6 +119,11 @@ btext_setup_display(int width, int height, int depth, int pitch, boot_text_mapped = 1; } +void __init btext_unmap(void) +{ + boot_text_mapped = 0; +} + /* Here's a small text engine to use during early boot * or for debugging purposes * @@ -127,7 +135,7 @@ btext_setup_display(int width, int height, int depth, int pitch, * changes. */ -void map_boot_text(void) +static void map_boot_text(void) { unsigned long base, offset, size; unsigned char *vbase; @@ -175,8 +183,9 @@ int btext_initialize(struct device_node *np) if (prop) address = *prop; - /* FIXME: Add support for PCI reg properties */ - + /* FIXME: Add support for PCI reg properties. Right now, only + * reliable on macs + */ if (address == 0) return -EINVAL; @@ -184,7 +193,6 @@ int btext_initialize(struct device_node *np) g_loc_Y = 0; g_max_loc_X = width / 8; g_max_loc_Y = height / 16; - logicalDisplayBase = (unsigned char *)address; dispDeviceBase = (unsigned char *)address; dispDeviceRowBytes = pitch; dispDeviceDepth = depth; @@ -197,14 +205,12 @@ int btext_initialize(struct device_node *np) return 0; } -void __init init_boot_display(void) +int __init btext_find_display(int allow_nonstdout) { char *name; struct device_node *np = NULL; int rc = -ENODEV; - printk("trying to initialize btext ...\n"); - name = (char *)get_property(of_chosen, "linux,stdout-path", NULL); if (name != NULL) { np = of_find_node_by_path(name); @@ -218,8 +224,8 @@ void __init init_boot_display(void) } if (np) rc = btext_initialize(np); - if (rc == 0) - return; + if (rc == 0 || !allow_nonstdout) + return rc; for (np = NULL; (np = of_find_node_by_type(np, "display"));) { if (get_property(np, "linux,opened", NULL)) { @@ -228,8 +234,9 @@ void __init init_boot_display(void) printk("result: %d\n", rc); } if (rc == 0) - return; + break; } + return rc; } /* Calc the base address of a given point (x,y) */ @@ -277,44 +284,83 @@ EXPORT_SYMBOL(btext_update_display); void btext_clearscreen(void) { - unsigned long *base = (unsigned long *)calc_base(0, 0); + unsigned int *base = (unsigned int *)calc_base(0, 0); unsigned long width = ((dispDeviceRect[2] - dispDeviceRect[0]) * - (dispDeviceDepth >> 3)) >> 3; + (dispDeviceDepth >> 3)) >> 2; int i,j; for (i=0; i<(dispDeviceRect[3] - dispDeviceRect[1]); i++) { - unsigned long *ptr = base; + unsigned int *ptr = base; for(j=width; j; --j) *(ptr++) = 0; - base += (dispDeviceRowBytes >> 3); + base += (dispDeviceRowBytes >> 2); } } +void btext_flushscreen(void) +{ + unsigned int *base = (unsigned int *)calc_base(0, 0); + unsigned long width = ((dispDeviceRect[2] - dispDeviceRect[0]) * + (dispDeviceDepth >> 3)) >> 2; + int i,j; + + for (i=0; i < (dispDeviceRect[3] - dispDeviceRect[1]); i++) + { + unsigned int *ptr = base; + for(j = width; j > 0; j -= 8) { + __asm__ __volatile__ ("dcbst 0,%0" :: "r" (ptr)); + ptr += 8; + } + base += (dispDeviceRowBytes >> 2); + } + __asm__ __volatile__ ("sync" ::: "memory"); +} + +void btext_flushline(void) +{ + unsigned int *base = (unsigned int *)calc_base(0, g_loc_Y << 4); + unsigned long width = ((dispDeviceRect[2] - dispDeviceRect[0]) * + (dispDeviceDepth >> 3)) >> 2; + int i,j; + + for (i=0; i < 16; i++) + { + unsigned int *ptr = base; + for(j = width; j > 0; j -= 8) { + __asm__ __volatile__ ("dcbst 0,%0" :: "r" (ptr)); + ptr += 8; + } + base += (dispDeviceRowBytes >> 2); + } + __asm__ __volatile__ ("sync" ::: "memory"); +} + + #ifndef NO_SCROLL static void scrollscreen(void) { - unsigned long *src = (unsigned long *)calc_base(0,16); - unsigned long *dst = (unsigned long *)calc_base(0,0); + unsigned int *src = (unsigned int *)calc_base(0,16); + unsigned int *dst = (unsigned int *)calc_base(0,0); unsigned long width = ((dispDeviceRect[2] - dispDeviceRect[0]) * - (dispDeviceDepth >> 3)) >> 3; + (dispDeviceDepth >> 3)) >> 2; int i,j; for (i=0; i<(dispDeviceRect[3] - dispDeviceRect[1] - 16); i++) { - unsigned long *src_ptr = src; - unsigned long *dst_ptr = dst; + unsigned int *src_ptr = src; + unsigned int *dst_ptr = dst; for(j=width; j; --j) *(dst_ptr++) = *(src_ptr++); - src += (dispDeviceRowBytes >> 3); - dst += (dispDeviceRowBytes >> 3); + src += (dispDeviceRowBytes >> 2); + dst += (dispDeviceRowBytes >> 2); } for (i=0; i<16; i++) { - unsigned long *dst_ptr = dst; + unsigned int *dst_ptr = dst; for(j=width; j; --j) *(dst_ptr++) = 0; - dst += (dispDeviceRowBytes >> 3); + dst += (dispDeviceRowBytes >> 2); } } #endif /* ndef NO_SCROLL */ @@ -377,6 +423,14 @@ void btext_drawstring(const char *c) btext_drawchar(*c++); } +void btext_drawtext(const char *c, unsigned int len) +{ + if (!boot_text_mapped) + return; + while (len--) + btext_drawchar(*c++); +} + void btext_drawhex(unsigned long v) { char *hex_table = "0123456789abcdef"; diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 1d85ced..43c74a6 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -78,10 +78,8 @@ struct cpu_spec cpu_specs[] = { .dcache_bsize = 128, .num_pmcs = 8, .cpu_setup = __setup_cpu_power3, -#ifdef CONFIG_OPROFILE .oprofile_cpu_type = "ppc64/power3", - .oprofile_model = &op_model_rs64, -#endif + .oprofile_type = RS64, }, { /* Power3+ */ .pvr_mask = 0xffff0000, @@ -93,10 +91,8 @@ struct cpu_spec cpu_specs[] = { .dcache_bsize = 128, .num_pmcs = 8, .cpu_setup = __setup_cpu_power3, -#ifdef CONFIG_OPROFILE .oprofile_cpu_type = "ppc64/power3", - .oprofile_model = &op_model_rs64, -#endif + .oprofile_type = RS64, }, { /* Northstar */ .pvr_mask = 0xffff0000, @@ -108,10 +104,8 @@ struct cpu_spec cpu_specs[] = { .dcache_bsize = 128, .num_pmcs = 8, .cpu_setup = __setup_cpu_power3, -#ifdef CONFIG_OPROFILE .oprofile_cpu_type = "ppc64/rs64", - .oprofile_model = &op_model_rs64, -#endif + .oprofile_type = RS64, }, { /* Pulsar */ .pvr_mask = 0xffff0000, @@ -123,10 +117,8 @@ struct cpu_spec cpu_specs[] = { .dcache_bsize = 128, .num_pmcs = 8, .cpu_setup = __setup_cpu_power3, -#ifdef CONFIG_OPROFILE .oprofile_cpu_type = "ppc64/rs64", - .oprofile_model = &op_model_rs64, -#endif + .oprofile_type = RS64, }, { /* I-star */ .pvr_mask = 0xffff0000, @@ -138,10 +130,8 @@ struct cpu_spec cpu_specs[] = { .dcache_bsize = 128, .num_pmcs = 8, .cpu_setup = __setup_cpu_power3, -#ifdef CONFIG_OPROFILE .oprofile_cpu_type = "ppc64/rs64", - .oprofile_model = &op_model_rs64, -#endif + .oprofile_type = RS64, }, { /* S-star */ .pvr_mask = 0xffff0000, @@ -153,10 +143,8 @@ struct cpu_spec cpu_specs[] = { .dcache_bsize = 128, .num_pmcs = 8, .cpu_setup = __setup_cpu_power3, -#ifdef CONFIG_OPROFILE .oprofile_cpu_type = "ppc64/rs64", - .oprofile_model = &op_model_rs64, -#endif + .oprofile_type = RS64, }, { /* Power4 */ .pvr_mask = 0xffff0000, @@ -168,10 +156,8 @@ struct cpu_spec cpu_specs[] = { .dcache_bsize = 128, .num_pmcs = 8, .cpu_setup = __setup_cpu_power4, -#ifdef CONFIG_OPROFILE .oprofile_cpu_type = "ppc64/power4", - .oprofile_model = &op_model_rs64, -#endif + .oprofile_type = POWER4, }, { /* Power4+ */ .pvr_mask = 0xffff0000, @@ -183,10 +169,8 @@ struct cpu_spec cpu_specs[] = { .dcache_bsize = 128, .num_pmcs = 8, .cpu_setup = __setup_cpu_power4, -#ifdef CONFIG_OPROFILE .oprofile_cpu_type = "ppc64/power4", - .oprofile_model = &op_model_power4, -#endif + .oprofile_type = POWER4, }, { /* PPC970 */ .pvr_mask = 0xffff0000, @@ -199,10 +183,8 @@ struct cpu_spec cpu_specs[] = { .dcache_bsize = 128, .num_pmcs = 8, .cpu_setup = __setup_cpu_ppc970, -#ifdef CONFIG_OPROFILE .oprofile_cpu_type = "ppc64/970", - .oprofile_model = &op_model_power4, -#endif + .oprofile_type = POWER4, }, #endif /* CONFIG_PPC64 */ #if defined(CONFIG_PPC64) || defined(CONFIG_POWER4) @@ -221,10 +203,8 @@ struct cpu_spec cpu_specs[] = { .dcache_bsize = 128, .num_pmcs = 8, .cpu_setup = __setup_cpu_ppc970, -#ifdef CONFIG_OPROFILE .oprofile_cpu_type = "ppc64/970", - .oprofile_model = &op_model_power4, -#endif + .oprofile_type = POWER4, }, #endif /* defined(CONFIG_PPC64) || defined(CONFIG_POWER4) */ #ifdef CONFIG_PPC64 @@ -238,10 +218,8 @@ struct cpu_spec cpu_specs[] = { .icache_bsize = 128, .dcache_bsize = 128, .cpu_setup = __setup_cpu_ppc970, -#ifdef CONFIG_OPROFILE .oprofile_cpu_type = "ppc64/970", - .oprofile_model = &op_model_power4, -#endif + .oprofile_type = POWER4, }, { /* Power5 GR */ .pvr_mask = 0xffff0000, @@ -253,27 +231,23 @@ struct cpu_spec cpu_specs[] = { .dcache_bsize = 128, .num_pmcs = 6, .cpu_setup = __setup_cpu_power4, -#ifdef CONFIG_OPROFILE .oprofile_cpu_type = "ppc64/power5", - .oprofile_model = &op_model_power4, -#endif + .oprofile_type = POWER4, }, { /* Power5 GS */ .pvr_mask = 0xffff0000, .pvr_value = 0x003b0000, - .cpu_name = "POWER5 (gs)", + .cpu_name = "POWER5+ (gs)", .cpu_features = CPU_FTRS_POWER5, .cpu_user_features = COMMON_USER_POWER5_PLUS, .icache_bsize = 128, .dcache_bsize = 128, .num_pmcs = 6, .cpu_setup = __setup_cpu_power4, -#ifdef CONFIG_OPROFILE - .oprofile_cpu_type = "ppc64/power5", - .oprofile_model = &op_model_power4, -#endif + .oprofile_cpu_type = "ppc64/power5+", + .oprofile_type = POWER4, }, - { /* BE DD1.x */ + { /* Cell Broadband Engine */ .pvr_mask = 0xffff0000, .pvr_value = 0x00700000, .cpu_name = "Cell Broadband Engine", @@ -545,7 +519,9 @@ struct cpu_spec cpu_specs[] = { .icache_bsize = 32, .dcache_bsize = 32, .num_pmcs = 6, - .cpu_setup = __setup_cpu_745x + .cpu_setup = __setup_cpu_745x, + .oprofile_cpu_type = "ppc/7450", + .oprofile_type = G4, }, { /* 7450 2.1 */ .pvr_mask = 0xffffffff, @@ -556,7 +532,9 @@ struct cpu_spec cpu_specs[] = { .icache_bsize = 32, .dcache_bsize = 32, .num_pmcs = 6, - .cpu_setup = __setup_cpu_745x + .cpu_setup = __setup_cpu_745x, + .oprofile_cpu_type = "ppc/7450", + .oprofile_type = G4, }, { /* 7450 2.3 and newer */ .pvr_mask = 0xffff0000, @@ -567,7 +545,9 @@ struct cpu_spec cpu_specs[] = { .icache_bsize = 32, .dcache_bsize = 32, .num_pmcs = 6, - .cpu_setup = __setup_cpu_745x + .cpu_setup = __setup_cpu_745x, + .oprofile_cpu_type = "ppc/7450", + .oprofile_type = G4, }, { /* 7455 rev 1.x */ .pvr_mask = 0xffffff00, @@ -578,7 +558,9 @@ struct cpu_spec cpu_specs[] = { .icache_bsize = 32, .dcache_bsize = 32, .num_pmcs = 6, - .cpu_setup = __setup_cpu_745x + .cpu_setup = __setup_cpu_745x, + .oprofile_cpu_type = "ppc/7450", + .oprofile_type = G4, }, { /* 7455 rev 2.0 */ .pvr_mask = 0xffffffff, @@ -589,7 +571,9 @@ struct cpu_spec cpu_specs[] = { .icache_bsize = 32, .dcache_bsize = 32, .num_pmcs = 6, - .cpu_setup = __setup_cpu_745x + .cpu_setup = __setup_cpu_745x, + .oprofile_cpu_type = "ppc/7450", + .oprofile_type = G4, }, { /* 7455 others */ .pvr_mask = 0xffff0000, @@ -600,7 +584,9 @@ struct cpu_spec cpu_specs[] = { .icache_bsize = 32, .dcache_bsize = 32, .num_pmcs = 6, - .cpu_setup = __setup_cpu_745x + .cpu_setup = __setup_cpu_745x, + .oprofile_cpu_type = "ppc/7450", + .oprofile_type = G4, }, { /* 7447/7457 Rev 1.0 */ .pvr_mask = 0xffffffff, @@ -611,7 +597,9 @@ struct cpu_spec cpu_specs[] = { .icache_bsize = 32, .dcache_bsize = 32, .num_pmcs = 6, - .cpu_setup = __setup_cpu_745x + .cpu_setup = __setup_cpu_745x, + .oprofile_cpu_type = "ppc/7450", + .oprofile_type = G4, }, { /* 7447/7457 Rev 1.1 */ .pvr_mask = 0xffffffff, @@ -622,7 +610,9 @@ struct cpu_spec cpu_specs[] = { .icache_bsize = 32, .dcache_bsize = 32, .num_pmcs = 6, - .cpu_setup = __setup_cpu_745x + .cpu_setup = __setup_cpu_745x, + .oprofile_cpu_type = "ppc/7450", + .oprofile_type = G4, }, { /* 7447/7457 Rev 1.2 and later */ .pvr_mask = 0xffff0000, @@ -633,7 +623,9 @@ struct cpu_spec cpu_specs[] = { .icache_bsize = 32, .dcache_bsize = 32, .num_pmcs = 6, - .cpu_setup = __setup_cpu_745x + .cpu_setup = __setup_cpu_745x, + .oprofile_cpu_type = "ppc/7450", + .oprofile_type = G4, }, { /* 7447A */ .pvr_mask = 0xffff0000, @@ -644,7 +636,9 @@ struct cpu_spec cpu_specs[] = { .icache_bsize = 32, .dcache_bsize = 32, .num_pmcs = 6, - .cpu_setup = __setup_cpu_745x + .cpu_setup = __setup_cpu_745x, + .oprofile_cpu_type = "ppc/7450", + .oprofile_type = G4, }, { /* 7448 */ .pvr_mask = 0xffff0000, @@ -655,7 +649,9 @@ struct cpu_spec cpu_specs[] = { .icache_bsize = 32, .dcache_bsize = 32, .num_pmcs = 6, - .cpu_setup = __setup_cpu_745x + .cpu_setup = __setup_cpu_745x, + .oprofile_cpu_type = "ppc/7450", + .oprofile_type = G4, }, { /* 82xx (8240, 8245, 8260 are all 603e cores) */ .pvr_mask = 0x7fff0000, @@ -979,6 +975,8 @@ struct cpu_spec cpu_specs[] = { .icache_bsize = 32, .dcache_bsize = 32, .num_pmcs = 4, + .oprofile_cpu_type = "ppc/e500", + .oprofile_type = BOOKE, }, { /* e500v2 */ .pvr_mask = 0xffff0000, @@ -992,6 +990,8 @@ struct cpu_spec cpu_specs[] = { .icache_bsize = 32, .dcache_bsize = 32, .num_pmcs = 4, + .oprofile_cpu_type = "ppc/e500", + .oprofile_type = BOOKE, }, #endif #if !CLASSIC_PPC diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c new file mode 100644 index 0000000..4681155 --- /dev/null +++ b/arch/powerpc/kernel/crash.c @@ -0,0 +1,264 @@ +/* + * Architecture specific (PPC64) functions for kexec based crash dumps. + * + * Copyright (C) 2005, IBM Corp. + * + * Created by: Haren Myneni + * + * This source code is licensed under the GNU General Public License, + * Version 2. See the file COPYING for more details. + * + */ + +#undef DEBUG + +#include <linux/kernel.h> +#include <linux/smp.h> +#include <linux/reboot.h> +#include <linux/kexec.h> +#include <linux/bootmem.h> +#include <linux/crash_dump.h> +#include <linux/irq.h> +#include <linux/delay.h> +#include <linux/elf.h> +#include <linux/elfcore.h> +#include <linux/init.h> +#include <linux/types.h> + +#include <asm/processor.h> +#include <asm/machdep.h> +#include <asm/kdump.h> +#include <asm/lmb.h> +#include <asm/firmware.h> + +#ifdef DEBUG +#include <asm/udbg.h> +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +/* This keeps a track of which one is crashing cpu. */ +int crashing_cpu = -1; + +static u32 *append_elf_note(u32 *buf, char *name, unsigned type, void *data, + size_t data_len) +{ + struct elf_note note; + + note.n_namesz = strlen(name) + 1; + note.n_descsz = data_len; + note.n_type = type; + memcpy(buf, ¬e, sizeof(note)); + buf += (sizeof(note) +3)/4; + memcpy(buf, name, note.n_namesz); + buf += (note.n_namesz + 3)/4; + memcpy(buf, data, note.n_descsz); + buf += (note.n_descsz + 3)/4; + + return buf; +} + +static void final_note(u32 *buf) +{ + struct elf_note note; + + note.n_namesz = 0; + note.n_descsz = 0; + note.n_type = 0; + memcpy(buf, ¬e, sizeof(note)); +} + +static void crash_save_this_cpu(struct pt_regs *regs, int cpu) +{ + struct elf_prstatus prstatus; + u32 *buf; + + if ((cpu < 0) || (cpu >= NR_CPUS)) + return; + + /* Using ELF notes here is opportunistic. + * I need a well defined structure format + * for the data I pass, and I need tags + * on the data to indicate what information I have + * squirrelled away. ELF notes happen to provide + * all of that that no need to invent something new. + */ + buf = &crash_notes[cpu][0]; + memset(&prstatus, 0, sizeof(prstatus)); + prstatus.pr_pid = current->pid; + elf_core_copy_regs(&prstatus.pr_reg, regs); + buf = append_elf_note(buf, "CORE", NT_PRSTATUS, &prstatus, + sizeof(prstatus)); + final_note(buf); +} + +/* FIXME Merge this with xmon_save_regs ?? */ +static inline void crash_get_current_regs(struct pt_regs *regs) +{ + unsigned long tmp1, tmp2; + + __asm__ __volatile__ ( + "std 0,0(%2)\n" + "std 1,8(%2)\n" + "std 2,16(%2)\n" + "std 3,24(%2)\n" + "std 4,32(%2)\n" + "std 5,40(%2)\n" + "std 6,48(%2)\n" + "std 7,56(%2)\n" + "std 8,64(%2)\n" + "std 9,72(%2)\n" + "std 10,80(%2)\n" + "std 11,88(%2)\n" + "std 12,96(%2)\n" + "std 13,104(%2)\n" + "std 14,112(%2)\n" + "std 15,120(%2)\n" + "std 16,128(%2)\n" + "std 17,136(%2)\n" + "std 18,144(%2)\n" + "std 19,152(%2)\n" + "std 20,160(%2)\n" + "std 21,168(%2)\n" + "std 22,176(%2)\n" + "std 23,184(%2)\n" + "std 24,192(%2)\n" + "std 25,200(%2)\n" + "std 26,208(%2)\n" + "std 27,216(%2)\n" + "std 28,224(%2)\n" + "std 29,232(%2)\n" + "std 30,240(%2)\n" + "std 31,248(%2)\n" + "mfmsr %0\n" + "std %0, 264(%2)\n" + "mfctr %0\n" + "std %0, 280(%2)\n" + "mflr %0\n" + "std %0, 288(%2)\n" + "bl 1f\n" + "1: mflr %1\n" + "std %1, 256(%2)\n" + "mtlr %0\n" + "mfxer %0\n" + "std %0, 296(%2)\n" + : "=&r" (tmp1), "=&r" (tmp2) + : "b" (regs)); +} + +/* We may have saved_regs from where the error came from + * or it is NULL if via a direct panic(). + */ +static void crash_save_self(struct pt_regs *saved_regs) +{ + struct pt_regs regs; + int cpu; + + cpu = smp_processor_id(); + if (saved_regs) + memcpy(®s, saved_regs, sizeof(regs)); + else + crash_get_current_regs(®s); + crash_save_this_cpu(®s, cpu); +} + +#ifdef CONFIG_SMP +static atomic_t waiting_for_crash_ipi; + +void crash_ipi_callback(struct pt_regs *regs) +{ + int cpu = smp_processor_id(); + + if (cpu == crashing_cpu) + return; + + if (!cpu_online(cpu)) + return; + + if (ppc_md.kexec_cpu_down) + ppc_md.kexec_cpu_down(1, 1); + + local_irq_disable(); + + crash_save_this_cpu(regs, cpu); + atomic_dec(&waiting_for_crash_ipi); + kexec_smp_wait(); + /* NOTREACHED */ +} + +static void crash_kexec_prepare_cpus(void) +{ + unsigned int msecs; + + atomic_set(&waiting_for_crash_ipi, num_online_cpus() - 1); + + crash_send_ipi(crash_ipi_callback); + smp_wmb(); + + /* + * FIXME: Until we will have the way to stop other CPUSs reliabally, + * the crash CPU will send an IPI and wait for other CPUs to + * respond. If not, proceed the kexec boot even though we failed to + * capture other CPU states. + */ + msecs = 1000000; + while ((atomic_read(&waiting_for_crash_ipi) > 0) && (--msecs > 0)) { + barrier(); + mdelay(1); + } + + /* Would it be better to replace the trap vector here? */ + + /* + * FIXME: In case if we do not get all CPUs, one possibility: ask the + * user to do soft reset such that we get all. + * IPI handler is already set by the panic cpu initially. Therefore, + * all cpus could invoke this handler from die() and the panic CPU + * will call machine_kexec() directly from this handler to do + * kexec boot. + */ + if (atomic_read(&waiting_for_crash_ipi)) + printk(KERN_ALERT "done waiting: %d cpus not responding\n", + atomic_read(&waiting_for_crash_ipi)); + /* Leave the IPI callback set */ +} +#else +static void crash_kexec_prepare_cpus(void) +{ + /* + * move the secondarys to us so that we can copy + * the new kernel 0-0x100 safely + * + * do this if kexec in setup.c ? + */ + smp_release_cpus(); +} + +#endif + +void default_machine_crash_shutdown(struct pt_regs *regs) +{ + /* + * This function is only called after the system + * has paniced or is otherwise in a critical state. + * The minimum amount of code to allow a kexec'd kernel + * to run successfully needs to happen here. + * + * In practice this means stopping other cpus in + * an SMP system. + * The kernel is broken so disable interrupts. + */ + local_irq_disable(); + + if (ppc_md.kexec_cpu_down) + ppc_md.kexec_cpu_down(1, 0); + + /* + * Make a note of crashing cpu. Will be used in machine_kexec + * such that another IPI will not be sent. + */ + crashing_cpu = smp_processor_id(); + crash_kexec_prepare_cpus(); + crash_save_self(regs); +} diff --git a/arch/powerpc/kernel/crash_dump.c b/arch/powerpc/kernel/crash_dump.c new file mode 100644 index 0000000..87effa3 --- /dev/null +++ b/arch/powerpc/kernel/crash_dump.c @@ -0,0 +1,109 @@ +/* + * Routines for doing kexec-based kdump. + * + * Copyright (C) 2005, IBM Corp. + * + * Created by: Michael Ellerman + * + * This source code is licensed under the GNU General Public License, + * Version 2. See the file COPYING for more details. + */ + +#undef DEBUG + +#include <linux/crash_dump.h> +#include <linux/bootmem.h> +#include <asm/kdump.h> +#include <asm/lmb.h> +#include <asm/firmware.h> +#include <asm/uaccess.h> + +#ifdef DEBUG +#include <asm/udbg.h> +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +static void __init create_trampoline(unsigned long addr) +{ + /* The maximum range of a single instruction branch, is the current + * instruction's address + (32 MB - 4) bytes. For the trampoline we + * need to branch to current address + 32 MB. So we insert a nop at + * the trampoline address, then the next instruction (+ 4 bytes) + * does a branch to (32 MB - 4). The net effect is that when we + * branch to "addr" we jump to ("addr" + 32 MB). Although it requires + * two instructions it doesn't require any registers. + */ + create_instruction(addr, 0x60000000); /* nop */ + create_branch(addr + 4, addr + PHYSICAL_START, 0); +} + +void __init kdump_setup(void) +{ + unsigned long i; + + DBG(" -> kdump_setup()\n"); + + for (i = KDUMP_TRAMPOLINE_START; i < KDUMP_TRAMPOLINE_END; i += 8) { + create_trampoline(i); + } + + create_trampoline(__pa(system_reset_fwnmi) - PHYSICAL_START); + create_trampoline(__pa(machine_check_fwnmi) - PHYSICAL_START); + + DBG(" <- kdump_setup()\n"); +} + +static int __init parse_elfcorehdr(char *p) +{ + if (p) + elfcorehdr_addr = memparse(p, &p); + + return 0; +} +__setup("elfcorehdr=", parse_elfcorehdr); + +static int __init parse_savemaxmem(char *p) +{ + if (p) + saved_max_pfn = (memparse(p, &p) >> PAGE_SHIFT) - 1; + + return 0; +} +__setup("savemaxmem=", parse_savemaxmem); + +/* + * copy_oldmem_page - copy one page from "oldmem" + * @pfn: page frame number to be copied + * @buf: target memory address for the copy; this can be in kernel address + * space or user address space (see @userbuf) + * @csize: number of bytes to copy + * @offset: offset in bytes into the page (based on pfn) to begin the copy + * @userbuf: if set, @buf is in user address space, use copy_to_user(), + * otherwise @buf is in kernel address space, use memcpy(). + * + * Copy a page from "oldmem". For this page, there is no pte mapped + * in the current kernel. We stitch up a pte, similar to kmap_atomic. + */ +ssize_t copy_oldmem_page(unsigned long pfn, char *buf, + size_t csize, unsigned long offset, int userbuf) +{ + void *vaddr; + + if (!csize) + return 0; + + vaddr = __ioremap(pfn << PAGE_SHIFT, PAGE_SIZE, 0); + + if (userbuf) { + if (copy_to_user((char __user *)buf, (vaddr + offset), csize)) { + iounmap(vaddr); + return -EFAULT; + } + } else + memcpy(buf, (vaddr + offset), csize); + + iounmap(vaddr); + return csize; +} diff --git a/arch/powerpc/kernel/dma_64.c b/arch/powerpc/kernel/dma_64.c index 7c34196..36aaa76 100644 --- a/arch/powerpc/kernel/dma_64.c +++ b/arch/powerpc/kernel/dma_64.c @@ -10,6 +10,7 @@ /* Include the busses we support */ #include <linux/pci.h> #include <asm/vio.h> +#include <asm/ibmebus.h> #include <asm/scatterlist.h> #include <asm/bug.h> @@ -23,6 +24,10 @@ static struct dma_mapping_ops *get_dma_ops(struct device *dev) if (dev->bus == &vio_bus_type) return &vio_dma_ops; #endif +#ifdef CONFIG_IBMEBUS + if (dev->bus == &ibmebus_bus_type) + return &ibmebus_dma_ops; +#endif return NULL; } @@ -47,6 +52,10 @@ int dma_set_mask(struct device *dev, u64 dma_mask) if (dev->bus == &vio_bus_type) return -EIO; #endif /* CONFIG_IBMVIO */ +#ifdef CONFIG_IBMEBUS + if (dev->bus == &ibmebus_bus_type) + return -EIO; +#endif BUG(); return 0; } diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index 2e99ae4..036b71d 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -200,8 +200,6 @@ _GLOBAL(DoSyscall) bl do_show_syscall #endif /* SHOW_SYSCALLS */ rlwinm r10,r1,0,0,(31-THREAD_SHIFT) /* current_thread_info() */ - li r11,0 - stb r11,TI_SC_NOERR(r10) lwz r11,TI_FLAGS(r10) andi. r11,r11,_TIF_SYSCALL_T_OR_A bne- syscall_dotrace @@ -222,25 +220,21 @@ ret_from_syscall: bl do_show_syscall_exit #endif mr r6,r3 - li r11,-_LAST_ERRNO - cmplw 0,r3,r11 rlwinm r12,r1,0,0,(31-THREAD_SHIFT) /* current_thread_info() */ - blt+ 30f - lbz r11,TI_SC_NOERR(r12) - cmpwi r11,0 - bne 30f - neg r3,r3 - lwz r10,_CCR(r1) /* Set SO bit in CR */ - oris r10,r10,0x1000 - stw r10,_CCR(r1) - /* disable interrupts so current_thread_info()->flags can't change */ -30: LOAD_MSR_KERNEL(r10,MSR_KERNEL) /* doesn't include MSR_EE */ + LOAD_MSR_KERNEL(r10,MSR_KERNEL) /* doesn't include MSR_EE */ SYNC MTMSRD(r10) lwz r9,TI_FLAGS(r12) - andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SIGPENDING|_TIF_NEED_RESCHED) + li r8,-_LAST_ERRNO + andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SIGPENDING|_TIF_NEED_RESCHED|_TIF_RESTOREALL) bne- syscall_exit_work + cmplw 0,r3,r8 + blt+ syscall_exit_cont + lwz r11,_CCR(r1) /* Load CR */ + neg r3,r3 + oris r11,r11,0x1000 /* Set SO bit in CR */ + stw r11,_CCR(r1) syscall_exit_cont: #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE) /* If the process has its own DBCR0 value, load it up. The single @@ -292,46 +286,113 @@ syscall_dotrace: b syscall_dotrace_cont syscall_exit_work: - stw r6,RESULT(r1) /* Save result */ + andi. r0,r9,_TIF_RESTOREALL + bne- 2f + cmplw 0,r3,r8 + blt+ 1f + andi. r0,r9,_TIF_NOERROR + bne- 1f + lwz r11,_CCR(r1) /* Load CR */ + neg r3,r3 + oris r11,r11,0x1000 /* Set SO bit in CR */ + stw r11,_CCR(r1) + +1: stw r6,RESULT(r1) /* Save result */ stw r3,GPR3(r1) /* Update return value */ - andi. r0,r9,_TIF_SYSCALL_T_OR_A - beq 5f - ori r10,r10,MSR_EE - SYNC - MTMSRD(r10) /* re-enable interrupts */ +2: andi. r0,r9,(_TIF_PERSYSCALL_MASK) + beq 4f + + /* Clear per-syscall TIF flags if any are set, but _leave_ + _TIF_SAVE_NVGPRS set in r9 since we haven't dealt with that + yet. */ + + li r11,_TIF_PERSYSCALL_MASK + addi r12,r12,TI_FLAGS +3: lwarx r8,0,r12 + andc r8,r8,r11 +#ifdef CONFIG_IBM405_ERR77 + dcbt 0,r12 +#endif + stwcx. r8,0,r12 + bne- 3b + subi r12,r12,TI_FLAGS + +4: /* Anything which requires enabling interrupts? */ + andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_SAVE_NVGPRS) + beq 7f + + /* Save NVGPRS if they're not saved already */ lwz r4,_TRAP(r1) andi. r4,r4,1 - beq 4f + beq 5f SAVE_NVGPRS(r1) li r4,0xc00 stw r4,_TRAP(r1) -4: + + /* Re-enable interrupts */ +5: ori r10,r10,MSR_EE + SYNC + MTMSRD(r10) + + andi. r0,r9,_TIF_SAVE_NVGPRS + bne save_user_nvgprs + +save_user_nvgprs_cont: + andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP) + beq 7f + addi r3,r1,STACK_FRAME_OVERHEAD bl do_syscall_trace_leave REST_NVGPRS(r1) -2: - lwz r3,GPR3(r1) + +6: lwz r3,GPR3(r1) LOAD_MSR_KERNEL(r10,MSR_KERNEL) /* doesn't include MSR_EE */ SYNC MTMSRD(r10) /* disable interrupts again */ rlwinm r12,r1,0,0,(31-THREAD_SHIFT) /* current_thread_info() */ lwz r9,TI_FLAGS(r12) -5: +7: andi. r0,r9,_TIF_NEED_RESCHED - bne 1f + bne 8f lwz r5,_MSR(r1) andi. r5,r5,MSR_PR - beq syscall_exit_cont + beq ret_from_except andi. r0,r9,_TIF_SIGPENDING - beq syscall_exit_cont + beq ret_from_except b do_user_signal -1: +8: ori r10,r10,MSR_EE SYNC MTMSRD(r10) /* re-enable interrupts */ bl schedule - b 2b + b 6b + +save_user_nvgprs: + lwz r8,TI_SIGFRAME(r12) + +.macro savewords start, end + 1: stw \start,4*(\start)(r8) + .section __ex_table,"a" + .align 2 + .long 1b,save_user_nvgprs_fault + .previous + .if \end - \start + savewords "(\start+1)",\end + .endif +.endm + savewords 14,31 + b save_user_nvgprs_cont + + +save_user_nvgprs_fault: + li r3,11 /* SIGSEGV */ + lwz r4,TI_TASK(r12) + bl force_sigsegv + rlwinm r12,r1,0,0,(31-THREAD_SHIFT) /* current_thread_info() */ + lwz r9,TI_FLAGS(r12) + b save_user_nvgprs_cont + #ifdef SHOW_SYSCALLS do_show_syscall: #ifdef SHOW_SYSCALLS_TASK @@ -401,28 +462,10 @@ show_syscalls_task: #endif /* SHOW_SYSCALLS */ /* - * The sigsuspend and rt_sigsuspend system calls can call do_signal - * and thus put the process into the stopped state where we might - * want to examine its user state with ptrace. Therefore we need - * to save all the nonvolatile registers (r13 - r31) before calling - * the C code. + * The fork/clone functions need to copy the full register set into + * the child process. Therefore we need to save all the nonvolatile + * registers (r13 - r31) before calling the C code. */ - .globl ppc_sigsuspend -ppc_sigsuspend: - SAVE_NVGPRS(r1) - lwz r0,_TRAP(r1) - rlwinm r0,r0,0,0,30 /* clear LSB to indicate full */ - stw r0,_TRAP(r1) /* register set saved */ - b sys_sigsuspend - - .globl ppc_rt_sigsuspend -ppc_rt_sigsuspend: - SAVE_NVGPRS(r1) - lwz r0,_TRAP(r1) - rlwinm r0,r0,0,0,30 - stw r0,_TRAP(r1) - b sys_rt_sigsuspend - .globl ppc_fork ppc_fork: SAVE_NVGPRS(r1) @@ -447,14 +490,6 @@ ppc_clone: stw r0,_TRAP(r1) /* register set saved */ b sys_clone - .globl ppc_swapcontext -ppc_swapcontext: - SAVE_NVGPRS(r1) - lwz r0,_TRAP(r1) - rlwinm r0,r0,0,0,30 /* clear LSB to indicate full */ - stw r0,_TRAP(r1) /* register set saved */ - b sys_swapcontext - /* * Top-level page fault handling. * This is in assembler because if do_page_fault tells us that @@ -626,16 +661,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_601) .long ret_from_except #endif - .globl sigreturn_exit -sigreturn_exit: - subi r1,r3,STACK_FRAME_OVERHEAD - rlwinm r12,r1,0,0,(31-THREAD_SHIFT) /* current_thread_info() */ - lwz r9,TI_FLAGS(r12) - andi. r0,r9,_TIF_SYSCALL_T_OR_A - beq+ ret_from_except_full - bl do_syscall_trace_leave - /* fall through */ - .globl ret_from_except_full ret_from_except_full: REST_NVGPRS(r1) @@ -658,7 +683,7 @@ user_exc_return: /* r10 contains MSR_KERNEL here */ /* Check current_thread_info()->flags */ rlwinm r9,r1,0,0,(31-THREAD_SHIFT) lwz r9,TI_FLAGS(r9) - andi. r0,r9,(_TIF_SIGPENDING|_TIF_NEED_RESCHED) + andi. r0,r9,(_TIF_SIGPENDING|_TIF_NEED_RESCHED|_TIF_RESTOREALL) bne do_work restore_user: diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index bce33a3..aacebb3 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -113,9 +113,7 @@ system_call_common: addi r9,r1,STACK_FRAME_OVERHEAD #endif clrrdi r11,r1,THREAD_SHIFT - li r12,0 ld r10,TI_FLAGS(r11) - stb r12,TI_SC_NOERR(r11) andi. r11,r10,_TIF_SYSCALL_T_OR_A bne- syscall_dotrace syscall_dotrace_cont: @@ -144,24 +142,12 @@ system_call: /* label this so stack traces look sane */ bctrl /* Call handler */ syscall_exit: + std r3,RESULT(r1) #ifdef SHOW_SYSCALLS - std r3,GPR3(r1) bl .do_show_syscall_exit - ld r3,GPR3(r1) + ld r3,RESULT(r1) #endif - std r3,RESULT(r1) - ld r5,_CCR(r1) - li r10,-_LAST_ERRNO - cmpld r3,r10 clrrdi r12,r1,THREAD_SHIFT - bge- syscall_error -syscall_error_cont: - - /* check for syscall tracing or audit */ - ld r9,TI_FLAGS(r12) - andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP) - bne- syscall_exit_trace -syscall_exit_trace_cont: /* disable interrupts so current_thread_info()->flags can't change, and so that we don't get interrupted after loading SRR0/1. */ @@ -173,8 +159,13 @@ syscall_exit_trace_cont: rotldi r10,r10,16 mtmsrd r10,1 ld r9,TI_FLAGS(r12) - andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SIGPENDING|_TIF_NEED_RESCHED) + li r11,-_LAST_ERRNO + andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_SIGPENDING|_TIF_NEED_RESCHED|_TIF_RESTOREALL|_TIF_SAVE_NVGPRS|_TIF_NOERROR) bne- syscall_exit_work + cmpld r3,r11 + ld r5,_CCR(r1) + bge- syscall_error +syscall_error_cont: ld r7,_NIP(r1) stdcx. r0,0,r1 /* to clear the reservation */ andi. r6,r8,MSR_PR @@ -193,21 +184,12 @@ syscall_exit_trace_cont: rfid b . /* prevent speculative execution */ -syscall_enosys: - li r3,-ENOSYS - std r3,RESULT(r1) - clrrdi r12,r1,THREAD_SHIFT - ld r5,_CCR(r1) - -syscall_error: - lbz r11,TI_SC_NOERR(r12) - cmpwi 0,r11,0 - bne- syscall_error_cont - neg r3,r3 +syscall_error: oris r5,r5,0x1000 /* Set SO bit in CR */ + neg r3,r3 std r5,_CCR(r1) b syscall_error_cont - + /* Traced system call support */ syscall_dotrace: bl .save_nvgprs @@ -225,21 +207,69 @@ syscall_dotrace: ld r10,TI_FLAGS(r10) b syscall_dotrace_cont -syscall_exit_trace: - std r3,GPR3(r1) - bl .save_nvgprs +syscall_enosys: + li r3,-ENOSYS + b syscall_exit + +syscall_exit_work: + /* If TIF_RESTOREALL is set, don't scribble on either r3 or ccr. + If TIF_NOERROR is set, just save r3 as it is. */ + + andi. r0,r9,_TIF_RESTOREALL + bne- 2f + cmpld r3,r11 /* r10 is -LAST_ERRNO */ + blt+ 1f + andi. r0,r9,_TIF_NOERROR + bne- 1f + ld r5,_CCR(r1) + neg r3,r3 + oris r5,r5,0x1000 /* Set SO bit in CR */ + std r5,_CCR(r1) +1: std r3,GPR3(r1) +2: andi. r0,r9,(_TIF_PERSYSCALL_MASK) + beq 4f + + /* Clear per-syscall TIF flags if any are set, but _leave_ + _TIF_SAVE_NVGPRS set in r9 since we haven't dealt with that + yet. */ + + li r11,_TIF_PERSYSCALL_MASK + addi r12,r12,TI_FLAGS +3: ldarx r10,0,r12 + andc r10,r10,r11 + stdcx. r10,0,r12 + bne- 3b + subi r12,r12,TI_FLAGS + +4: bl .save_nvgprs + /* Anything else left to do? */ + andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_SAVE_NVGPRS) + beq .ret_from_except_lite + + /* Re-enable interrupts */ + mfmsr r10 + ori r10,r10,MSR_EE + mtmsrd r10,1 + + andi. r0,r9,_TIF_SAVE_NVGPRS + bne save_user_nvgprs + + /* If tracing, re-enable interrupts and do it */ +save_user_nvgprs_cont: + andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP) + beq 5f + addi r3,r1,STACK_FRAME_OVERHEAD bl .do_syscall_trace_leave REST_NVGPRS(r1) - ld r3,GPR3(r1) - ld r5,_CCR(r1) clrrdi r12,r1,THREAD_SHIFT - b syscall_exit_trace_cont -/* Stuff to do on exit from a system call. */ -syscall_exit_work: - std r3,GPR3(r1) - std r5,_CCR(r1) + /* Disable interrupts again and handle other work if any */ +5: mfmsr r10 + rldicl r10,r10,48,1 + rotldi r10,r10,16 + mtmsrd r10,1 + b .ret_from_except_lite /* Save non-volatile GPRs, if not already saved. */ @@ -252,6 +282,52 @@ _GLOBAL(save_nvgprs) std r0,_TRAP(r1) blr + +save_user_nvgprs: + ld r10,TI_SIGFRAME(r12) + andi. r0,r9,_TIF_32BIT + beq- save_user_nvgprs_64 + + /* 32-bit save to userspace */ + +.macro savewords start, end + 1: stw \start,4*(\start)(r10) + .section __ex_table,"a" + .align 3 + .llong 1b,save_user_nvgprs_fault + .previous + .if \end - \start + savewords "(\start+1)",\end + .endif +.endm + savewords 14,31 + b save_user_nvgprs_cont + +save_user_nvgprs_64: + /* 64-bit save to userspace */ + +.macro savelongs start, end + 1: std \start,8*(\start)(r10) + .section __ex_table,"a" + .align 3 + .llong 1b,save_user_nvgprs_fault + .previous + .if \end - \start + savelongs "(\start+1)",\end + .endif +.endm + savelongs 14,31 + b save_user_nvgprs_cont + +save_user_nvgprs_fault: + li r3,11 /* SIGSEGV */ + ld r4,TI_TASK(r12) + bl .force_sigsegv + + clrrdi r12,r1,THREAD_SHIFT + ld r9,TI_FLAGS(r12) + b save_user_nvgprs_cont + /* * The sigsuspend and rt_sigsuspend system calls can call do_signal * and thus put the process into the stopped state where we might @@ -260,35 +336,6 @@ _GLOBAL(save_nvgprs) * the C code. Similarly, fork, vfork and clone need the full * register state on the stack so that it can be copied to the child. */ -_GLOBAL(ppc32_sigsuspend) - bl .save_nvgprs - bl .compat_sys_sigsuspend - b 70f - -_GLOBAL(ppc64_rt_sigsuspend) - bl .save_nvgprs - bl .sys_rt_sigsuspend - b 70f - -_GLOBAL(ppc32_rt_sigsuspend) - bl .save_nvgprs - bl .compat_sys_rt_sigsuspend -70: cmpdi 0,r3,0 - /* If it returned an error, we need to return via syscall_exit to set - the SO bit in cr0 and potentially stop for ptrace. */ - bne syscall_exit - /* If sigsuspend() returns zero, we are going into a signal handler. We - may need to call audit_syscall_exit() to mark the exit from sigsuspend() */ -#ifdef CONFIG_AUDITSYSCALL - ld r3,PACACURRENT(r13) - ld r4,AUDITCONTEXT(r3) - cmpdi 0,r4,0 - beq .ret_from_except /* No audit_context: Leave immediately. */ - li r4, 2 /* AUDITSC_FAILURE */ - li r5,-4 /* It's always -EINTR */ - bl .audit_syscall_exit -#endif - b .ret_from_except _GLOBAL(ppc_fork) bl .save_nvgprs @@ -305,37 +352,6 @@ _GLOBAL(ppc_clone) bl .sys_clone b syscall_exit -_GLOBAL(ppc32_swapcontext) - bl .save_nvgprs - bl .compat_sys_swapcontext - b 80f - -_GLOBAL(ppc64_swapcontext) - bl .save_nvgprs - bl .sys_swapcontext - b 80f - -_GLOBAL(ppc32_sigreturn) - bl .compat_sys_sigreturn - b 80f - -_GLOBAL(ppc32_rt_sigreturn) - bl .compat_sys_rt_sigreturn - b 80f - -_GLOBAL(ppc64_rt_sigreturn) - bl .sys_rt_sigreturn - -80: cmpdi 0,r3,0 - blt syscall_exit - clrrdi r4,r1,THREAD_SHIFT - ld r4,TI_FLAGS(r4) - andi. r4,r4,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP) - beq+ 81f - addi r3,r1,STACK_FRAME_OVERHEAD - bl .do_syscall_trace_leave -81: b .ret_from_except - _GLOBAL(ret_from_fork) bl .schedule_tail REST_NVGPRS(r1) @@ -674,7 +690,7 @@ _GLOBAL(enter_rtas) /* Setup our real return addr */ SET_REG_TO_LABEL(r4,.rtas_return_loc) - SET_REG_TO_CONST(r9,KERNELBASE) + SET_REG_TO_CONST(r9,PAGE_OFFSET) sub r4,r4,r9 mtlr r4 @@ -702,7 +718,7 @@ _GLOBAL(enter_rtas) _STATIC(rtas_return_loc) /* relocation is off at this point */ mfspr r4,SPRN_SPRG3 /* Get PACA */ - SET_REG_TO_CONST(r5, KERNELBASE) + SET_REG_TO_CONST(r5, PAGE_OFFSET) sub r4,r4,r5 /* RELOC the PACA base pointer */ mfmsr r6 diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S index ccdf947..03b25f9 100644 --- a/arch/powerpc/kernel/head_32.S +++ b/arch/powerpc/kernel/head_32.S @@ -120,10 +120,25 @@ __start: * because OF may have I/O devices mapped into that area * (particularly on CHRP). */ +#ifdef CONFIG_PPC_MULTIPLATFORM cmpwi 0,r5,0 beq 1f bl prom_init trap +#endif + +/* + * Check for BootX signature when supporting PowerMac and branch to + * appropriate trampoline if it's present + */ +#ifdef CONFIG_PPC_PMAC +1: lis r31,0x426f + ori r31,r31,0x6f58 + cmpw 0,r3,r31 + bne 1f + bl bootx_init + trap +#endif /* CONFIG_PPC_PMAC */ 1: mr r31,r3 /* save parameters */ mr r30,r4 @@ -153,6 +168,9 @@ __after_mmu_off: bl flush_tlbs bl initial_bats +#if !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT) + bl setup_disp_bat +#endif /* * Call setup_cpu for CPU 0 and initialize 6xx Idle @@ -450,16 +468,11 @@ SystemCall: * by executing an altivec instruction. */ . = 0xf00 - b Trap_0f + b PerformanceMonitor . = 0xf20 b AltiVecUnavailable -Trap_0f: - EXCEPTION_PROLOG - addi r3,r1,STACK_FRAME_OVERHEAD - EXC_XFER_EE(0xf00, unknown_exception) - /* * Handle TLB miss for instruction on 603/603e. * Note: we get an alternate set of r0 - r3 to use automatically. @@ -703,6 +716,11 @@ AltiVecUnavailable: #endif /* CONFIG_ALTIVEC */ EXC_XFER_EE_LITE(0xf20, altivec_unavailable_exception) +PerformanceMonitor: + EXCEPTION_PROLOG + addi r3,r1,STACK_FRAME_OVERHEAD + EXC_XFER_STD(0xf00, performance_monitor_exception) + #ifdef CONFIG_ALTIVEC /* Note that the AltiVec support is closely modeled after the FP * support. Changes to one are likely to be applicable to the @@ -1306,6 +1324,32 @@ initial_bats: blr +#if !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT) +setup_disp_bat: + /* + * setup the display bat prepared for us in prom.c + */ + mflr r8 + bl reloc_offset + mtlr r8 + addis r8,r3,disp_BAT@ha + addi r8,r8,disp_BAT@l + cmpwi cr0,r8,0 + beqlr + lwz r11,0(r8) + lwz r8,4(r8) + mfspr r9,SPRN_PVR + rlwinm r9,r9,16,16,31 /* r9 = 1 for 601, 4 for 604 */ + cmpwi 0,r9,1 + beq 1f + mtspr SPRN_DBAT3L,r8 + mtspr SPRN_DBAT3U,r11 + blr +1: mtspr SPRN_IBAT3L,r8 + mtspr SPRN_IBAT3U,r11 + blr +#endif /* !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT) */ + #ifdef CONFIG_8260 /* Jump into the system reset for the rom. * We first disable the MMU, and then jump to the ROM reset address. diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 8a8bf79..1c066d1 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -154,11 +154,15 @@ _GLOBAL(__secondary_hold) bne 100b #ifdef CONFIG_HMT - b .hmt_init + LOADADDR(r4, .hmt_init) + mtctr r4 + bctr #else #ifdef CONFIG_SMP + LOADADDR(r4, .pSeries_secondary_smp_init) + mtctr r4 mr r3,r24 - b .pSeries_secondary_smp_init + bctr #else BUG_OPCODE #endif @@ -200,6 +204,20 @@ exception_marker: #define EX_R3 64 #define EX_LR 72 +/* + * We're short on space and time in the exception prolog, so we can't use + * the normal LOADADDR macro. Normally we just need the low halfword of the + * address, but for Kdump we need the whole low word. + */ +#ifdef CONFIG_CRASH_DUMP +#define LOAD_HANDLER(reg, label) \ + oris reg,reg,(label)@h; /* virt addr of handler ... */ \ + ori reg,reg,(label)@l; /* .. and the rest */ +#else +#define LOAD_HANDLER(reg, label) \ + ori reg,reg,(label)@l; /* virt addr of handler ... */ +#endif + #define EXCEPTION_PROLOG_PSERIES(area, label) \ mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ std r9,area+EX_R9(r13); /* save r9 - r12 */ \ @@ -212,7 +230,7 @@ exception_marker: clrrdi r12,r13,32; /* get high part of &label */ \ mfmsr r10; \ mfspr r11,SPRN_SRR0; /* save SRR0 */ \ - ori r12,r12,(label)@l; /* virt addr of handler */ \ + LOAD_HANDLER(r12,label) \ ori r10,r10,MSR_IR|MSR_DR|MSR_RI; \ mtspr SPRN_SRR0,r12; \ mfspr r12,SPRN_SRR1; /* and SRR1 */ \ @@ -553,6 +571,7 @@ slb_miss_user_pseries: * Vectors for the FWNMI option. Share common code. */ .globl system_reset_fwnmi + .align 7 system_reset_fwnmi: HMT_MEDIUM mtspr SPRN_SPRG1,r13 /* save r13 */ @@ -560,6 +579,7 @@ system_reset_fwnmi: EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common) .globl machine_check_fwnmi + .align 7 machine_check_fwnmi: HMT_MEDIUM mtspr SPRN_SPRG1,r13 /* save r13 */ @@ -726,7 +746,8 @@ iSeries_secondary_smp_loop: decrementer_iSeries_masked: li r11,1 stb r11,PACALPPACA+LPPACADECRINT(r13) - lwz r12,PACADEFAULTDECR(r13) + LOADBASE(r12,tb_ticks_per_jiffy) + lwz r12,OFF(tb_ticks_per_jiffy)(r12) mtspr SPRN_DEC,r12 /* fall through */ @@ -1345,7 +1366,7 @@ _GLOBAL(do_stab_bolted) * fixed address (the linker can't compute (u64)&initial_stab >> * PAGE_SHIFT). */ - . = STAB0_PHYS_ADDR /* 0x6000 */ + . = STAB0_OFFSET /* 0x6000 */ .globl initial_stab initial_stab: .space 4096 @@ -1485,11 +1506,13 @@ _STATIC(__mmu_off) * */ _GLOBAL(__start_initialization_multiplatform) +#ifdef CONFIG_PPC_MULTIPLATFORM /* * Are we booted from a PROM Of-type client-interface ? */ cmpldi cr0,r5,0 bne .__boot_from_prom /* yes -> prom */ +#endif /* Save parameters */ mr r31,r3 @@ -1510,6 +1533,7 @@ _GLOBAL(__start_initialization_multiplatform) bl .__mmu_off b .__after_prom_start +#ifdef CONFIG_PPC_MULTIPLATFORM _STATIC(__boot_from_prom) /* Save parameters */ mr r31,r3 @@ -1542,6 +1566,7 @@ _STATIC(__boot_from_prom) bl .prom_init /* We never return */ trap +#endif /* * At this point, r3 contains the physical address we are running at, @@ -1550,7 +1575,7 @@ _STATIC(__boot_from_prom) _STATIC(__after_prom_start) /* - * We need to run with __start at physical address 0. + * We need to run with __start at physical address PHYSICAL_START. * This will leave some code in the first 256B of * real memory, which are reserved for software use. * The remainder of the first page is loaded with the fixed @@ -1565,7 +1590,7 @@ _STATIC(__after_prom_start) mr r26,r3 SET_REG_TO_CONST(r27,KERNELBASE) - li r3,0 /* target addr */ + LOADADDR(r3, PHYSICAL_START) /* target addr */ // XXX FIXME: Use phys returned by OF (r30) add r4,r27,r26 /* source addr */ @@ -1846,7 +1871,7 @@ _STATIC(start_here_multiplatform) mulli r13,r27,PACA_SIZE /* Calculate vaddr of right paca */ add r13,r13,r24 /* for this processor. */ add r13,r13,r26 /* convert to physical addr */ - mtspr SPRN_SPRG3,r13 /* PPPBBB: Temp... -Peter */ + mtspr SPRN_SPRG3,r13 /* Do very early kernel initializations, including initial hash table, * stab and slb setup before we turn on relocation. */ diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c new file mode 100644 index 0000000..e47d40a --- /dev/null +++ b/arch/powerpc/kernel/ibmebus.c @@ -0,0 +1,396 @@ +/* + * IBM PowerPC IBM eBus Infrastructure Support. + * + * Copyright (c) 2005 IBM Corporation + * Heiko J Schick <schickhj@de.ibm.com> + * + * All rights reserved. + * + * This source code is distributed under a dual license of GPL v2.0 and OpenIB + * BSD. + * + * OpenIB BSD License + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER + * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/init.h> +#include <linux/console.h> +#include <linux/kobject.h> +#include <linux/dma-mapping.h> +#include <linux/interrupt.h> +#include <asm/ibmebus.h> +#include <asm/abs_addr.h> + +static struct ibmebus_dev ibmebus_bus_device = { /* fake "parent" device */ + .name = ibmebus_bus_device.ofdev.dev.bus_id, + .ofdev.dev.bus_id = "ibmebus", + .ofdev.dev.bus = &ibmebus_bus_type, +}; + +static void *ibmebus_alloc_coherent(struct device *dev, + size_t size, + dma_addr_t *dma_handle, + gfp_t flag) +{ + void *mem; + + mem = kmalloc(size, flag); + *dma_handle = (dma_addr_t)mem; + + return mem; +} + +static void ibmebus_free_coherent(struct device *dev, + size_t size, void *vaddr, + dma_addr_t dma_handle) +{ + kfree(vaddr); +} + +static dma_addr_t ibmebus_map_single(struct device *dev, + void *ptr, + size_t size, + enum dma_data_direction direction) +{ + return (dma_addr_t)(ptr); +} + +static void ibmebus_unmap_single(struct device *dev, + dma_addr_t dma_addr, + size_t size, + enum dma_data_direction direction) +{ + return; +} + +static int ibmebus_map_sg(struct device *dev, + struct scatterlist *sg, + int nents, enum dma_data_direction direction) +{ + int i; + + for (i = 0; i < nents; i++) { + sg[i].dma_address = (dma_addr_t)page_address(sg[i].page) + + sg[i].offset; + sg[i].dma_length = sg[i].length; + } + + return nents; +} + +static void ibmebus_unmap_sg(struct device *dev, + struct scatterlist *sg, + int nents, enum dma_data_direction direction) +{ + return; +} + +static int ibmebus_dma_supported(struct device *dev, u64 mask) +{ + return 1; +} + +struct dma_mapping_ops ibmebus_dma_ops = { + .alloc_coherent = ibmebus_alloc_coherent, + .free_coherent = ibmebus_free_coherent, + .map_single = ibmebus_map_single, + .unmap_single = ibmebus_unmap_single, + .map_sg = ibmebus_map_sg, + .unmap_sg = ibmebus_unmap_sg, + .dma_supported = ibmebus_dma_supported, +}; + +static int ibmebus_bus_probe(struct device *dev) +{ + struct ibmebus_dev *ibmebusdev = to_ibmebus_dev(dev); + struct ibmebus_driver *ibmebusdrv = to_ibmebus_driver(dev->driver); + const struct of_device_id *id; + int error = -ENODEV; + + if (!ibmebusdrv->probe) + return error; + + id = of_match_device(ibmebusdrv->id_table, &ibmebusdev->ofdev); + if (id) { + error = ibmebusdrv->probe(ibmebusdev, id); + } + + return error; +} + +static int ibmebus_bus_remove(struct device *dev) +{ + struct ibmebus_dev *ibmebusdev = to_ibmebus_dev(dev); + struct ibmebus_driver *ibmebusdrv = to_ibmebus_driver(dev->driver); + + if (ibmebusdrv->remove) { + return ibmebusdrv->remove(ibmebusdev); + } + + return 0; +} + +static void __devinit ibmebus_dev_release(struct device *dev) +{ + of_node_put(to_ibmebus_dev(dev)->ofdev.node); + kfree(to_ibmebus_dev(dev)); +} + +static ssize_t ibmebusdev_show_name(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%s\n", to_ibmebus_dev(dev)->name); +} +static DEVICE_ATTR(name, S_IRUSR | S_IRGRP | S_IROTH, ibmebusdev_show_name, + NULL); + +static struct ibmebus_dev* __devinit ibmebus_register_device_common( + struct ibmebus_dev *dev, char *name) +{ + int err = 0; + + dev->name = name; + dev->ofdev.dev.parent = &ibmebus_bus_device.ofdev.dev; + dev->ofdev.dev.bus = &ibmebus_bus_type; + dev->ofdev.dev.release = ibmebus_dev_release; + + /* An ibmebusdev is based on a of_device. We have to change the + * bus type to use our own DMA mapping operations. + */ + if ((err = of_device_register(&dev->ofdev)) != 0) { + printk(KERN_ERR "%s: failed to register device (%d).\n", + __FUNCTION__, err); + return NULL; + } + + device_create_file(&dev->ofdev.dev, &dev_attr_name); + + return dev; +} + +static struct ibmebus_dev* __devinit ibmebus_register_device_node( + struct device_node *dn) +{ + struct ibmebus_dev *dev; + char *loc_code; + int length; + + loc_code = (char *)get_property(dn, "ibm,loc-code", NULL); + if (!loc_code) { + printk(KERN_WARNING "%s: node %s missing 'ibm,loc-code'\n", + __FUNCTION__, dn->name ? dn->name : "<unknown>"); + return NULL; + } + + if (strlen(loc_code) == 0) { + printk(KERN_WARNING "%s: 'ibm,loc-code' is invalid\n", + __FUNCTION__); + return NULL; + } + + dev = kmalloc(sizeof(struct ibmebus_dev), GFP_KERNEL); + if (!dev) { + return NULL; + } + memset(dev, 0, sizeof(struct ibmebus_dev)); + + dev->ofdev.node = of_node_get(dn); + + length = strlen(loc_code); + memcpy(dev->ofdev.dev.bus_id, loc_code + + (length - min(length, BUS_ID_SIZE - 1)), + min(length, BUS_ID_SIZE - 1)); + + /* Register with generic device framework. */ + if (ibmebus_register_device_common(dev, dn->name) == NULL) { + kfree(dev); + return NULL; + } + + return dev; +} + +static void ibmebus_probe_of_nodes(char* name) +{ + struct device_node *dn = NULL; + + while ((dn = of_find_node_by_name(dn, name))) { + if (ibmebus_register_device_node(dn) == NULL) { + of_node_put(dn); + + return; + } + } + + of_node_put(dn); + + return; +} + +static void ibmebus_add_devices_by_id(struct of_device_id *idt) +{ + while (strlen(idt->name) > 0) { + ibmebus_probe_of_nodes(idt->name); + idt++; + } + + return; +} + +static int ibmebus_match_helper(struct device *dev, void *data) +{ + if (strcmp((char*)data, to_ibmebus_dev(dev)->name) == 0) + return 1; + + return 0; +} + +static int ibmebus_unregister_device(struct device *dev) +{ + device_remove_file(dev, &dev_attr_name); + of_device_unregister(to_of_device(dev)); + + return 0; +} + +static void ibmebus_remove_devices_by_id(struct of_device_id *idt) +{ + struct device *dev; + + while (strlen(idt->name) > 0) { + while ((dev = bus_find_device(&ibmebus_bus_type, NULL, + (void*)idt->name, + ibmebus_match_helper))) { + ibmebus_unregister_device(dev); + } + idt++; + + } + + return; +} + +int ibmebus_register_driver(struct ibmebus_driver *drv) +{ + int err = 0; + + drv->driver.name = drv->name; + drv->driver.bus = &ibmebus_bus_type; + drv->driver.probe = ibmebus_bus_probe; + drv->driver.remove = ibmebus_bus_remove; + + if ((err = driver_register(&drv->driver) != 0)) + return err; + + ibmebus_add_devices_by_id(drv->id_table); + + return 0; +} +EXPORT_SYMBOL(ibmebus_register_driver); + +void ibmebus_unregister_driver(struct ibmebus_driver *drv) +{ + driver_unregister(&drv->driver); + ibmebus_remove_devices_by_id(drv->id_table); +} +EXPORT_SYMBOL(ibmebus_unregister_driver); + +int ibmebus_request_irq(struct ibmebus_dev *dev, + u32 ist, + irqreturn_t (*handler)(int, void*, struct pt_regs *), + unsigned long irq_flags, const char * devname, + void *dev_id) +{ + unsigned int irq = virt_irq_create_mapping(ist); + + if (irq == NO_IRQ) + return -EINVAL; + + irq = irq_offset_up(irq); + + return request_irq(irq, handler, + irq_flags, devname, dev_id); +} +EXPORT_SYMBOL(ibmebus_request_irq); + +void ibmebus_free_irq(struct ibmebus_dev *dev, u32 ist, void *dev_id) +{ + unsigned int irq = virt_irq_create_mapping(ist); + + irq = irq_offset_up(irq); + free_irq(irq, dev_id); + + return; +} +EXPORT_SYMBOL(ibmebus_free_irq); + +static int ibmebus_bus_match(struct device *dev, struct device_driver *drv) +{ + const struct ibmebus_dev *ebus_dev = to_ibmebus_dev(dev); + struct ibmebus_driver *ebus_drv = to_ibmebus_driver(drv); + const struct of_device_id *ids = ebus_drv->id_table; + const struct of_device_id *found_id; + + if (!ids) + return 0; + + found_id = of_match_device(ids, &ebus_dev->ofdev); + if (found_id) + return 1; + + return 0; +} + +struct bus_type ibmebus_bus_type = { + .name = "ibmebus", + .match = ibmebus_bus_match, +}; +EXPORT_SYMBOL(ibmebus_bus_type); + +static int __init ibmebus_bus_init(void) +{ + int err; + + printk(KERN_INFO "IBM eBus Device Driver\n"); + + err = bus_register(&ibmebus_bus_type); + if (err) { + printk(KERN_ERR ":%s: failed to register IBM eBus.\n", + __FUNCTION__); + return err; + } + + err = device_register(&ibmebus_bus_device.ofdev.dev); + if (err) { + printk(KERN_WARNING "%s: device_register returned %i\n", + __FUNCTION__, err); + bus_unregister(&ibmebus_bus_type); + + return err; + } + + return 0; +} +__initcall(ibmebus_bus_init); diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 5a71ed9..5651032 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -31,7 +31,6 @@ * to reduce code space and undefined function references. */ -#include <linux/errno.h> #include <linux/module.h> #include <linux/threads.h> #include <linux/kernel_stat.h> @@ -44,18 +43,12 @@ #include <linux/config.h> #include <linux/init.h> #include <linux/slab.h> -#include <linux/pci.h> #include <linux/delay.h> #include <linux/irq.h> -#include <linux/proc_fs.h> -#include <linux/random.h> #include <linux/seq_file.h> #include <linux/cpumask.h> #include <linux/profile.h> #include <linux/bitops.h> -#ifdef CONFIG_PPC64 -#include <linux/kallsyms.h> -#endif #include <asm/uaccess.h> #include <asm/system.h> @@ -66,8 +59,7 @@ #include <asm/prom.h> #include <asm/ptrace.h> #include <asm/machdep.h> -#ifdef CONFIG_PPC64 -#include <asm/iseries/it_lp_queue.h> +#ifdef CONFIG_PPC_ISERIES #include <asm/paca.h> #endif @@ -78,10 +70,6 @@ EXPORT_SYMBOL(__irq_offset_value); static int ppc_spurious_interrupts; -#if defined(CONFIG_PPC_ISERIES) && defined(CONFIG_SMP) -extern void iSeries_smp_message_recv(struct pt_regs *); -#endif - #ifdef CONFIG_PPC32 #define NR_MASK_WORDS ((NR_IRQS + 31) / 32) @@ -195,49 +183,6 @@ void fixup_irqs(cpumask_t map) } #endif -#ifdef CONFIG_PPC_ISERIES -void do_IRQ(struct pt_regs *regs) -{ - struct paca_struct *lpaca; - - irq_enter(); - -#ifdef CONFIG_DEBUG_STACKOVERFLOW - /* Debugging check for stack overflow: is there less than 2KB free? */ - { - long sp; - - sp = __get_SP() & (THREAD_SIZE-1); - - if (unlikely(sp < (sizeof(struct thread_info) + 2048))) { - printk("do_IRQ: stack overflow: %ld\n", - sp - sizeof(struct thread_info)); - dump_stack(); - } - } -#endif - - lpaca = get_paca(); -#ifdef CONFIG_SMP - if (lpaca->lppaca.int_dword.fields.ipi_cnt) { - lpaca->lppaca.int_dword.fields.ipi_cnt = 0; - iSeries_smp_message_recv(regs); - } -#endif /* CONFIG_SMP */ - if (hvlpevent_is_pending()) - process_hvlpevents(regs); - - irq_exit(); - - if (lpaca->lppaca.int_dword.fields.decr_int) { - lpaca->lppaca.int_dword.fields.decr_int = 0; - /* Signal a fake decrementer interrupt */ - timer_interrupt(regs); - } -} - -#else /* CONFIG_PPC_ISERIES */ - void do_IRQ(struct pt_regs *regs) { int irq; @@ -286,16 +231,24 @@ void do_IRQ(struct pt_regs *regs) } else #endif __do_IRQ(irq, regs); - } else -#ifdef CONFIG_PPC32 - if (irq != -2) -#endif - /* That's not SMP safe ... but who cares ? */ - ppc_spurious_interrupts++; + } else if (irq != -2) + /* That's not SMP safe ... but who cares ? */ + ppc_spurious_interrupts++; + irq_exit(); -} -#endif /* CONFIG_PPC_ISERIES */ +#ifdef CONFIG_PPC_ISERIES + { + struct paca_struct *lpaca = get_paca(); + + if (lpaca->lppaca.int_dword.fields.decr_int) { + lpaca->lppaca.int_dword.fields.decr_int = 0; + /* Signal a fake decrementer interrupt */ + timer_interrupt(regs); + } + } +#endif +} void __init init_IRQ(void) { diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c new file mode 100644 index 0000000..f970ace --- /dev/null +++ b/arch/powerpc/kernel/legacy_serial.c @@ -0,0 +1,557 @@ +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/serial.h> +#include <linux/serial_8250.h> +#include <linux/serial_core.h> +#include <linux/console.h> +#include <linux/pci.h> +#include <asm/io.h> +#include <asm/mmu.h> +#include <asm/prom.h> +#include <asm/serial.h> +#include <asm/udbg.h> +#include <asm/pci-bridge.h> +#include <asm/ppc-pci.h> + +#undef DEBUG + +#ifdef DEBUG +#define DBG(fmt...) do { printk(fmt); } while(0) +#else +#define DBG(fmt...) do { } while(0) +#endif + +#define MAX_LEGACY_SERIAL_PORTS 8 + +static struct plat_serial8250_port +legacy_serial_ports[MAX_LEGACY_SERIAL_PORTS+1]; +static struct legacy_serial_info { + struct device_node *np; + unsigned int speed; + unsigned int clock; + phys_addr_t taddr; +} legacy_serial_infos[MAX_LEGACY_SERIAL_PORTS]; +static unsigned int legacy_serial_count; +static int legacy_serial_console = -1; + +static int __init add_legacy_port(struct device_node *np, int want_index, + int iotype, phys_addr_t base, + phys_addr_t taddr, unsigned long irq, + unsigned int flags) +{ + u32 *clk, *spd, clock = BASE_BAUD * 16; + int index; + + /* get clock freq. if present */ + clk = (u32 *)get_property(np, "clock-frequency", NULL); + if (clk && *clk) + clock = *clk; + + /* get default speed if present */ + spd = (u32 *)get_property(np, "current-speed", NULL); + + /* If we have a location index, then try to use it */ + if (want_index >= 0 && want_index < MAX_LEGACY_SERIAL_PORTS) + index = want_index; + else + index = legacy_serial_count; + + /* if our index is still out of range, that mean that + * array is full, we could scan for a free slot but that + * make little sense to bother, just skip the port + */ + if (index >= MAX_LEGACY_SERIAL_PORTS) + return -1; + if (index >= legacy_serial_count) + legacy_serial_count = index + 1; + + /* Check if there is a port who already claimed our slot */ + if (legacy_serial_infos[index].np != 0) { + /* if we still have some room, move it, else override */ + if (legacy_serial_count < MAX_LEGACY_SERIAL_PORTS) { + printk(KERN_INFO "Moved legacy port %d -> %d\n", + index, legacy_serial_count); + legacy_serial_ports[legacy_serial_count] = + legacy_serial_ports[index]; + legacy_serial_infos[legacy_serial_count] = + legacy_serial_infos[index]; + legacy_serial_count++; + } else { + printk(KERN_INFO "Replacing legacy port %d\n", index); + } + } + + /* Now fill the entry */ + memset(&legacy_serial_ports[index], 0, + sizeof(struct plat_serial8250_port)); + if (iotype == UPIO_PORT) + legacy_serial_ports[index].iobase = base; + else + legacy_serial_ports[index].mapbase = base; + legacy_serial_ports[index].iotype = iotype; + legacy_serial_ports[index].uartclk = clock; + legacy_serial_ports[index].irq = irq; + legacy_serial_ports[index].flags = flags; + legacy_serial_infos[index].taddr = taddr; + legacy_serial_infos[index].np = of_node_get(np); + legacy_serial_infos[index].clock = clock; + legacy_serial_infos[index].speed = spd ? *spd : 0; + + printk(KERN_INFO "Found legacy serial port %d for %s\n", + index, np->full_name); + printk(KERN_INFO " %s=%llx, taddr=%llx, irq=%lx, clk=%d, speed=%d\n", + (iotype == UPIO_PORT) ? "port" : "mem", + (unsigned long long)base, (unsigned long long)taddr, irq, + legacy_serial_ports[index].uartclk, + legacy_serial_infos[index].speed); + + return index; +} + +static int __init add_legacy_soc_port(struct device_node *np, + struct device_node *soc_dev) +{ + phys_addr_t addr; + u32 *addrp; + unsigned int flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ; + + /* We only support ports that have a clock frequency properly + * encoded in the device-tree. + */ + if (get_property(np, "clock-frequency", NULL) == NULL) + return -1; + + /* Get the address */ + addrp = of_get_address(soc_dev, 0, NULL, NULL); + if (addrp == NULL) + return -1; + + addr = of_translate_address(soc_dev, addrp); + + /* Add port, irq will be dealt with later. We passed a translated + * IO port value. It will be fixed up later along with the irq + */ + return add_legacy_port(np, -1, UPIO_MEM, addr, addr, NO_IRQ, flags); +} + +#ifdef CONFIG_ISA +static int __init add_legacy_isa_port(struct device_node *np, + struct device_node *isa_brg) +{ + u32 *reg; + char *typep; + int index = -1; + phys_addr_t taddr; + + /* Get the ISA port number */ + reg = (u32 *)get_property(np, "reg", NULL); + if (reg == NULL) + return -1; + + /* Verify it's an IO port, we don't support anything else */ + if (!(reg[0] & 0x00000001)) + return -1; + + /* Now look for an "ibm,aix-loc" property that gives us ordering + * if any... + */ + typep = (char *)get_property(np, "ibm,aix-loc", NULL); + + /* If we have a location index, then use it */ + if (typep && *typep == 'S') + index = simple_strtol(typep+1, NULL, 0) - 1; + + /* Translate ISA address */ + taddr = of_translate_address(np, reg); + + /* Add port, irq will be dealt with later */ + return add_legacy_port(np, index, UPIO_PORT, reg[1], taddr, NO_IRQ, UPF_BOOT_AUTOCONF); + +} +#endif + +#ifdef CONFIG_PCI +static int __init add_legacy_pci_port(struct device_node *np, + struct device_node *pci_dev) +{ + phys_addr_t addr, base; + u32 *addrp; + unsigned int flags; + int iotype, index = -1, lindex = 0; + + /* We only support ports that have a clock frequency properly + * encoded in the device-tree (that is have an fcode). Anything + * else can't be used that early and will be normally probed by + * the generic 8250_pci driver later on. The reason is that 8250 + * compatible UARTs on PCI need all sort of quirks (port offsets + * etc...) that this code doesn't know about + */ + if (get_property(np, "clock-frequency", NULL) == NULL) + return -1; + + /* Get the PCI address. Assume BAR 0 */ + addrp = of_get_pci_address(pci_dev, 0, NULL, &flags); + if (addrp == NULL) + return -1; + + /* We only support BAR 0 for now */ + iotype = (flags & IORESOURCE_MEM) ? UPIO_MEM : UPIO_PORT; + addr = of_translate_address(pci_dev, addrp); + + /* Set the IO base to the same as the translated address for MMIO, + * or to the domain local IO base for PIO (it will be fixed up later) + */ + if (iotype == UPIO_MEM) + base = addr; + else + base = addrp[2]; + + /* Try to guess an index... If we have subdevices of the pci dev, + * we get to their "reg" property + */ + if (np != pci_dev) { + u32 *reg = (u32 *)get_property(np, "reg", NULL); + if (reg && (*reg < 4)) + index = lindex = *reg; + } + + /* Local index means it's the Nth port in the PCI chip. Unfortunately + * the offset to add here is device specific. We know about those + * EXAR ports and we default to the most common case. If your UART + * doesn't work for these settings, you'll have to add your own special + * cases here + */ + if (device_is_compatible(pci_dev, "pci13a8,152") || + device_is_compatible(pci_dev, "pci13a8,154") || + device_is_compatible(pci_dev, "pci13a8,158")) { + addr += 0x200 * lindex; + base += 0x200 * lindex; + } else { + addr += 8 * lindex; + base += 8 * lindex; + } + + /* Add port, irq will be dealt with later. We passed a translated + * IO port value. It will be fixed up later along with the irq + */ + return add_legacy_port(np, index, iotype, base, addr, NO_IRQ, UPF_BOOT_AUTOCONF); +} +#endif + +/* + * This is called very early, as part of setup_system() or eventually + * setup_arch(), basically before anything else in this file. This function + * will try to build a list of all the available 8250-compatible serial ports + * in the machine using the Open Firmware device-tree. It currently only deals + * with ISA and PCI busses but could be extended. It allows a very early boot + * console to be initialized, that list is also used later to provide 8250 with + * the machine non-PCI ports and to properly pick the default console port + */ +void __init find_legacy_serial_ports(void) +{ + struct device_node *np, *stdout = NULL; + char *path; + int index; + + DBG(" -> find_legacy_serial_port()\n"); + + /* Now find out if one of these is out firmware console */ + path = (char *)get_property(of_chosen, "linux,stdout-path", NULL); + if (path != NULL) { + stdout = of_find_node_by_path(path); + if (stdout) + DBG("stdout is %s\n", stdout->full_name); + } else { + DBG(" no linux,stdout-path !\n"); + } + + /* First fill our array with SOC ports */ + for (np = NULL; (np = of_find_compatible_node(np, "serial", "ns16550")) != NULL;) { + struct device_node *soc = of_get_parent(np); + if (soc && !strcmp(soc->type, "soc")) { + index = add_legacy_soc_port(np, np); + if (index >= 0 && np == stdout) + legacy_serial_console = index; + } + of_node_put(soc); + } + +#ifdef CONFIG_ISA + /* First fill our array with ISA ports */ + for (np = NULL; (np = of_find_node_by_type(np, "serial"));) { + struct device_node *isa = of_get_parent(np); + if (isa && !strcmp(isa->name, "isa")) { + index = add_legacy_isa_port(np, isa); + if (index >= 0 && np == stdout) + legacy_serial_console = index; + } + of_node_put(isa); + } +#endif + +#ifdef CONFIG_PCI + /* Next, try to locate PCI ports */ + for (np = NULL; (np = of_find_all_nodes(np));) { + struct device_node *pci, *parent = of_get_parent(np); + if (parent && !strcmp(parent->name, "isa")) { + of_node_put(parent); + continue; + } + if (strcmp(np->name, "serial") && strcmp(np->type, "serial")) { + of_node_put(parent); + continue; + } + /* Check for known pciclass, and also check wether we have + * a device with child nodes for ports or not + */ + if (device_is_compatible(np, "pciclass,0700") || + device_is_compatible(np, "pciclass,070002")) + pci = np; + else if (device_is_compatible(parent, "pciclass,0700") || + device_is_compatible(parent, "pciclass,070002")) + pci = parent; + else { + of_node_put(parent); + continue; + } + index = add_legacy_pci_port(np, pci); + if (index >= 0 && np == stdout) + legacy_serial_console = index; + of_node_put(parent); + } +#endif + + DBG("legacy_serial_console = %d\n", legacy_serial_console); + + /* udbg is 64 bits only for now, that will change soon though ... */ + while (legacy_serial_console >= 0) { + struct legacy_serial_info *info = + &legacy_serial_infos[legacy_serial_console]; + void __iomem *addr; + + if (info->taddr == 0) + break; + addr = ioremap(info->taddr, 0x1000); + if (addr == NULL) + break; + if (info->speed == 0) + info->speed = udbg_probe_uart_speed(addr, info->clock); + DBG("default console speed = %d\n", info->speed); + udbg_init_uart(addr, info->speed, info->clock); + break; + } + + DBG(" <- find_legacy_serial_port()\n"); +} + +static struct platform_device serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = legacy_serial_ports, + }, +}; + +static void __init fixup_port_irq(int index, + struct device_node *np, + struct plat_serial8250_port *port) +{ + DBG("fixup_port_irq(%d)\n", index); + + /* Check for interrupts in that node */ + if (np->n_intrs > 0) { + port->irq = np->intrs[0].line; + DBG(" port %d (%s), irq=%d\n", + index, np->full_name, port->irq); + return; + } + + /* Check for interrupts in the parent */ + np = of_get_parent(np); + if (np == NULL) + return; + + if (np->n_intrs > 0) { + port->irq = np->intrs[0].line; + DBG(" port %d (%s), irq=%d\n", + index, np->full_name, port->irq); + } + of_node_put(np); +} + +static void __init fixup_port_pio(int index, + struct device_node *np, + struct plat_serial8250_port *port) +{ +#ifdef CONFIG_PCI + struct pci_controller *hose; + + DBG("fixup_port_pio(%d)\n", index); + + hose = pci_find_hose_for_OF_device(np); + if (hose) { + unsigned long offset = (unsigned long)hose->io_base_virt - +#ifdef CONFIG_PPC64 + pci_io_base; +#else + isa_io_base; +#endif + DBG("port %d, IO %lx -> %lx\n", + index, port->iobase, port->iobase + offset); + port->iobase += offset; + } +#endif +} + +static void __init fixup_port_mmio(int index, + struct device_node *np, + struct plat_serial8250_port *port) +{ + DBG("fixup_port_mmio(%d)\n", index); + + port->membase = ioremap(port->mapbase, 0x100); +} + +/* + * This is called as an arch initcall, hopefully before the PCI bus is + * probed and/or the 8250 driver loaded since we need to register our + * platform devices before 8250 PCI ones are detected as some of them + * must properly "override" the platform ones. + * + * This function fixes up the interrupt value for platform ports as it + * couldn't be done earlier before interrupt maps have been parsed. It + * also "corrects" the IO address for PIO ports for the same reason, + * since earlier, the PHBs virtual IO space wasn't assigned yet. It then + * registers all those platform ports for use by the 8250 driver when it + * finally loads. + */ +static int __init serial_dev_init(void) +{ + int i; + + if (legacy_serial_count == 0) + return -ENODEV; + + /* + * Before we register the platfrom serial devices, we need + * to fixup their interrutps and their IO ports. + */ + DBG("Fixing serial ports interrupts and IO ports ...\n"); + + for (i = 0; i < legacy_serial_count; i++) { + struct plat_serial8250_port *port = &legacy_serial_ports[i]; + struct device_node *np = legacy_serial_infos[i].np; + + if (port->irq == NO_IRQ) + fixup_port_irq(i, np, port); + if (port->iotype == UPIO_PORT) + fixup_port_pio(i, np, port); + if (port->iotype == UPIO_MEM) + fixup_port_mmio(i, np, port); + } + + DBG("Registering platform serial ports\n"); + + return platform_device_register(&serial_device); +} +arch_initcall(serial_dev_init); + + +/* + * This is called very early, as part of console_init() (typically just after + * time_init()). This function is respondible for trying to find a good + * default console on serial ports. It tries to match the open firmware + * default output with one of the available serial console drivers, either + * one of the platform serial ports that have been probed earlier by + * find_legacy_serial_ports() or some more platform specific ones. + */ +static int __init check_legacy_serial_console(void) +{ + struct device_node *prom_stdout = NULL; + int speed = 0, offset = 0; + char *name; + u32 *spd; + + DBG(" -> check_legacy_serial_console()\n"); + + /* The user has requested a console so this is already set up. */ + if (strstr(saved_command_line, "console=")) { + DBG(" console was specified !\n"); + return -EBUSY; + } + + if (!of_chosen) { + DBG(" of_chosen is NULL !\n"); + return -ENODEV; + } + + if (legacy_serial_console < 0) { + DBG(" legacy_serial_console not found !\n"); + return -ENODEV; + } + /* We are getting a weird phandle from OF ... */ + /* ... So use the full path instead */ + name = (char *)get_property(of_chosen, "linux,stdout-path", NULL); + if (name == NULL) { + DBG(" no linux,stdout-path !\n"); + return -ENODEV; + } + prom_stdout = of_find_node_by_path(name); + if (!prom_stdout) { + DBG(" can't find stdout package %s !\n", name); + return -ENODEV; + } + DBG("stdout is %s\n", prom_stdout->full_name); + + name = (char *)get_property(prom_stdout, "name", NULL); + if (!name) { + DBG(" stdout package has no name !\n"); + goto not_found; + } + spd = (u32 *)get_property(prom_stdout, "current-speed", NULL); + if (spd) + speed = *spd; + + if (0) + ; +#ifdef CONFIG_SERIAL_8250_CONSOLE + else if (strcmp(name, "serial") == 0) { + int i; + /* Look for it in probed array */ + for (i = 0; i < legacy_serial_count; i++) { + if (prom_stdout != legacy_serial_infos[i].np) + continue; + offset = i; + speed = legacy_serial_infos[i].speed; + break; + } + if (i >= legacy_serial_count) + goto not_found; + } +#endif /* CONFIG_SERIAL_8250_CONSOLE */ +#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE + else if (strcmp(name, "ch-a") == 0) + offset = 0; + else if (strcmp(name, "ch-b") == 0) + offset = 1; +#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */ + else + goto not_found; + of_node_put(prom_stdout); + + DBG("Found serial console at ttyS%d\n", offset); + + if (speed) { + static char __initdata opt[16]; + sprintf(opt, "%d", speed); + return add_preferred_console("ttyS", offset, opt); + } else + return add_preferred_console("ttyS", offset, NULL); + + not_found: + DBG("No preferred console found !\n"); + of_node_put(prom_stdout); + return -ENODEV; +} +console_initcall(check_legacy_serial_console); + diff --git a/arch/powerpc/kernel/lparmap.c b/arch/powerpc/kernel/lparmap.c index 5a05a79..584d1e3 100644 --- a/arch/powerpc/kernel/lparmap.c +++ b/arch/powerpc/kernel/lparmap.c @@ -7,7 +7,7 @@ * 2 of the License, or (at your option) any later version. */ #include <asm/mmu.h> -#include <asm/page.h> +#include <asm/pgtable.h> #include <asm/iseries/lpar_map.h> const struct LparMap __attribute__((__section__(".text"))) xLparMap = { @@ -16,16 +16,16 @@ const struct LparMap __attribute__((__section__(".text"))) xLparMap = { .xSegmentTableOffs = STAB0_PAGE, .xEsids = { - { .xKernelEsid = GET_ESID(KERNELBASE), - .xKernelVsid = KERNEL_VSID(KERNELBASE), }, - { .xKernelEsid = GET_ESID(VMALLOCBASE), - .xKernelVsid = KERNEL_VSID(VMALLOCBASE), }, + { .xKernelEsid = GET_ESID(PAGE_OFFSET), + .xKernelVsid = KERNEL_VSID(PAGE_OFFSET), }, + { .xKernelEsid = GET_ESID(VMALLOC_START), + .xKernelVsid = KERNEL_VSID(VMALLOC_START), }, }, .xRanges = { { .xPages = HvPagesToMap, .xOffset = 0, - .xVPN = KERNEL_VSID(KERNELBASE) << (SID_SHIFT - HW_PAGE_SHIFT), + .xVPN = KERNEL_VSID(PAGE_OFFSET) << (SID_SHIFT - HW_PAGE_SHIFT), }, }, }; diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c new file mode 100644 index 0000000..a91e40c --- /dev/null +++ b/arch/powerpc/kernel/machine_kexec.c @@ -0,0 +1,67 @@ +/* + * Code to handle transition of Linux booting another kernel. + * + * Copyright (C) 2002-2003 Eric Biederman <ebiederm@xmission.com> + * GameCube/ppc32 port Copyright (C) 2004 Albert Herranz + * Copyright (C) 2005 IBM Corporation. + * + * This source code is licensed under the GNU General Public License, + * Version 2. See the file COPYING for more details. + */ + +#include <linux/kexec.h> +#include <linux/reboot.h> +#include <linux/threads.h> +#include <asm/machdep.h> + +/* + * Provide a dummy crash_notes definition until crash dump is implemented. + * This prevents breakage of crash_notes attribute in kernel/ksysfs.c. + */ +note_buf_t crash_notes[NR_CPUS]; + +void machine_crash_shutdown(struct pt_regs *regs) +{ + if (ppc_md.machine_crash_shutdown) + ppc_md.machine_crash_shutdown(regs); +} + +/* + * Do what every setup is needed on image and the + * reboot code buffer to allow us to avoid allocations + * later. + */ +int machine_kexec_prepare(struct kimage *image) +{ + if (ppc_md.machine_kexec_prepare) + return ppc_md.machine_kexec_prepare(image); + /* + * Fail if platform doesn't provide its own machine_kexec_prepare + * implementation. + */ + return -ENOSYS; +} + +void machine_kexec_cleanup(struct kimage *image) +{ + if (ppc_md.machine_kexec_cleanup) + ppc_md.machine_kexec_cleanup(image); +} + +/* + * Do not allocate memory (or fail in any way) in machine_kexec(). + * We are past the point of no return, committed to rebooting now. + */ +NORET_TYPE void machine_kexec(struct kimage *image) +{ + if (ppc_md.machine_kexec) + ppc_md.machine_kexec(image); + else { + /* + * Fall back to normal restart if platform doesn't provide + * its own kexec function, and user insist to kexec... + */ + machine_restart(NULL); + } + for(;;); +} diff --git a/arch/powerpc/kernel/machine_kexec_32.c b/arch/powerpc/kernel/machine_kexec_32.c new file mode 100644 index 0000000..4436061 --- /dev/null +++ b/arch/powerpc/kernel/machine_kexec_32.c @@ -0,0 +1,65 @@ +/* + * PPC32 code to handle Linux booting another kernel. + * + * Copyright (C) 2002-2003 Eric Biederman <ebiederm@xmission.com> + * GameCube/ppc32 port Copyright (C) 2004 Albert Herranz + * Copyright (C) 2005 IBM Corporation. + * + * This source code is licensed under the GNU General Public License, + * Version 2. See the file COPYING for more details. + */ + +#include <linux/kexec.h> +#include <linux/mm.h> +#include <linux/string.h> +#include <asm/cacheflush.h> +#include <asm/hw_irq.h> +#include <asm/io.h> + +typedef NORET_TYPE void (*relocate_new_kernel_t)( + unsigned long indirection_page, + unsigned long reboot_code_buffer, + unsigned long start_address) ATTRIB_NORET; + +/* + * This is a generic machine_kexec function suitable at least for + * non-OpenFirmware embedded platforms. + * It merely copies the image relocation code to the control page and + * jumps to it. + * A platform specific function may just call this one. + */ +void default_machine_kexec(struct kimage *image) +{ + const extern unsigned char relocate_new_kernel[]; + const extern unsigned int relocate_new_kernel_size; + unsigned long page_list; + unsigned long reboot_code_buffer, reboot_code_buffer_phys; + relocate_new_kernel_t rnk; + + /* Interrupts aren't acceptable while we reboot */ + local_irq_disable(); + + page_list = image->head; + + /* we need both effective and real address here */ + reboot_code_buffer = + (unsigned long)page_address(image->control_code_page); + reboot_code_buffer_phys = virt_to_phys((void *)reboot_code_buffer); + + /* copy our kernel relocation code to the control code page */ + memcpy((void *)reboot_code_buffer, relocate_new_kernel, + relocate_new_kernel_size); + + flush_icache_range(reboot_code_buffer, + reboot_code_buffer + KEXEC_CONTROL_CODE_SIZE); + printk(KERN_INFO "Bye!\n"); + + /* now call it */ + rnk = (relocate_new_kernel_t) reboot_code_buffer; + (*rnk)(page_list, reboot_code_buffer_phys, image->start); +} + +int default_machine_kexec_prepare(struct kimage *image) +{ + return 0; +} diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c index 97c51e4..d643144 100644 --- a/arch/powerpc/kernel/machine_kexec_64.c +++ b/arch/powerpc/kernel/machine_kexec_64.c @@ -1,5 +1,5 @@ /* - * machine_kexec.c - handle transition of Linux booting another kernel + * PPC64 code to handle Linux booting another kernel. * * Copyright (C) 2004-2005, IBM Corp. * @@ -28,21 +28,7 @@ #define HASH_GROUP_SIZE 0x80 /* size of each hash group, asm/mmu.h */ -/* Have this around till we move it into crash specific file */ -note_buf_t crash_notes[NR_CPUS]; - -/* Dummy for now. Not sure if we need to have a crash shutdown in here - * and if what it will achieve. Letting it be now to compile the code - * in generic kexec environment - */ -void machine_crash_shutdown(struct pt_regs *regs) -{ - /* do nothing right now */ - /* smp_relase_cpus() if we want smp on panic kernel */ - /* cpu_irq_down to isolate us until we are ready */ -} - -int machine_kexec_prepare(struct kimage *image) +int default_machine_kexec_prepare(struct kimage *image) { int i; unsigned long begin, end; /* limits of segment */ @@ -111,11 +97,6 @@ int machine_kexec_prepare(struct kimage *image) return 0; } -void machine_kexec_cleanup(struct kimage *image) -{ - /* we do nothing in prepare that needs to be undone */ -} - #define IND_FLAGS (IND_DESTINATION | IND_INDIRECTION | IND_DONE | IND_SOURCE) static void copy_segments(unsigned long ind) @@ -172,9 +153,8 @@ void kexec_copy_flush(struct kimage *image) * including ones that were in place on the original copy */ for (i = 0; i < nr_segments; i++) - flush_icache_range(ranges[i].mem + KERNELBASE, - ranges[i].mem + KERNELBASE + - ranges[i].memsz); + flush_icache_range((unsigned long)__va(ranges[i].mem), + (unsigned long)__va(ranges[i].mem + ranges[i].memsz)); } #ifdef CONFIG_SMP @@ -283,13 +263,20 @@ extern NORET_TYPE void kexec_sequence(void *newstack, unsigned long start, void (*clear_all)(void)) ATTRIB_NORET; /* too late to fail here */ -void machine_kexec(struct kimage *image) +void default_machine_kexec(struct kimage *image) { - /* prepare control code if any */ - /* shutdown other cpus into our wait loop and quiesce interrupts */ - kexec_prepare_cpus(); + /* + * If the kexec boot is the normal one, need to shutdown other cpus + * into our wait loop and quiesce interrupts. + * Otherwise, in the case of crashed mode (crashing_cpu >= 0), + * stopping other CPUs and collecting their pt_regs is done before + * using debugger IPI. + */ + + if (crashing_cpu == -1) + kexec_prepare_cpus(); /* switch to a staticly allocated stack. Based on irq stack code. * XXX: the task struct will likely be invalid once we do the copy! diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index 624a983..01d0d97 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -5,6 +5,10 @@ * Largely rewritten by Cort Dougan (cort@cs.nmt.edu) * and Paul Mackerras. * + * kexec bits: + * Copyright (C) 2002-2003 Eric Biederman <ebiederm@xmission.com> + * GameCube/ppc32 port Copyright (C) 2004 Albert Herranz + * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version @@ -24,6 +28,8 @@ #include <asm/ppc_asm.h> #include <asm/thread_info.h> #include <asm/asm-offsets.h> +#include <asm/processor.h> +#include <asm/kexec.h> .text @@ -1006,3 +1012,110 @@ _GLOBAL(execve) */ _GLOBAL(__main) blr + +#ifdef CONFIG_KEXEC + /* + * Must be relocatable PIC code callable as a C function. + */ + .globl relocate_new_kernel +relocate_new_kernel: + /* r3 = page_list */ + /* r4 = reboot_code_buffer */ + /* r5 = start_address */ + + li r0, 0 + + /* + * Set Machine Status Register to a known status, + * switch the MMU off and jump to 1: in a single step. + */ + + mr r8, r0 + ori r8, r8, MSR_RI|MSR_ME + mtspr SPRN_SRR1, r8 + addi r8, r4, 1f - relocate_new_kernel + mtspr SPRN_SRR0, r8 + sync + rfi + +1: + /* from this point address translation is turned off */ + /* and interrupts are disabled */ + + /* set a new stack at the bottom of our page... */ + /* (not really needed now) */ + addi r1, r4, KEXEC_CONTROL_CODE_SIZE - 8 /* for LR Save+Back Chain */ + stw r0, 0(r1) + + /* Do the copies */ + li r6, 0 /* checksum */ + mr r0, r3 + b 1f + +0: /* top, read another word for the indirection page */ + lwzu r0, 4(r3) + +1: + /* is it a destination page? (r8) */ + rlwinm. r7, r0, 0, 31, 31 /* IND_DESTINATION (1<<0) */ + beq 2f + + rlwinm r8, r0, 0, 0, 19 /* clear kexec flags, page align */ + b 0b + +2: /* is it an indirection page? (r3) */ + rlwinm. r7, r0, 0, 30, 30 /* IND_INDIRECTION (1<<1) */ + beq 2f + + rlwinm r3, r0, 0, 0, 19 /* clear kexec flags, page align */ + subi r3, r3, 4 + b 0b + +2: /* are we done? */ + rlwinm. r7, r0, 0, 29, 29 /* IND_DONE (1<<2) */ + beq 2f + b 3f + +2: /* is it a source page? (r9) */ + rlwinm. r7, r0, 0, 28, 28 /* IND_SOURCE (1<<3) */ + beq 0b + + rlwinm r9, r0, 0, 0, 19 /* clear kexec flags, page align */ + + li r7, PAGE_SIZE / 4 + mtctr r7 + subi r9, r9, 4 + subi r8, r8, 4 +9: + lwzu r0, 4(r9) /* do the copy */ + xor r6, r6, r0 + stwu r0, 4(r8) + dcbst 0, r8 + sync + icbi 0, r8 + bdnz 9b + + addi r9, r9, 4 + addi r8, r8, 4 + b 0b + +3: + + /* To be certain of avoiding problems with self-modifying code + * execute a serializing instruction here. + */ + isync + sync + + /* jump to the entry point, usually the setup routine */ + mtlr r5 + blrl + +1: b 1b + +relocate_new_kernel_end: + + .globl relocate_new_kernel_size +relocate_new_kernel_size: + .long relocate_new_kernel_end - relocate_new_kernel +#endif diff --git a/arch/powerpc/kernel/nvram_64.c b/arch/powerpc/kernel/nvram_64.c index c0fcd29..fd7db8d 100644 --- a/arch/powerpc/kernel/nvram_64.c +++ b/arch/powerpc/kernel/nvram_64.c @@ -80,80 +80,74 @@ static loff_t dev_nvram_llseek(struct file *file, loff_t offset, int origin) static ssize_t dev_nvram_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { - ssize_t len; - char *tmp_buffer; - int size; + ssize_t ret; + char *tmp = NULL; + ssize_t size; - if (ppc_md.nvram_size == NULL) - return -ENODEV; + ret = -ENODEV; + if (!ppc_md.nvram_size) + goto out; + + ret = 0; size = ppc_md.nvram_size(); + if (*ppos >= size || size < 0) + goto out; - if (!access_ok(VERIFY_WRITE, buf, count)) - return -EFAULT; - if (*ppos >= size) - return 0; - if (count > size) - count = size; + count = min_t(size_t, count, size - *ppos); + count = min(count, PAGE_SIZE); - tmp_buffer = (char *) kmalloc(count, GFP_KERNEL); - if (!tmp_buffer) { - printk(KERN_ERR "dev_read_nvram: kmalloc failed\n"); - return -ENOMEM; - } + ret = -ENOMEM; + tmp = kmalloc(count, GFP_KERNEL); + if (!tmp) + goto out; - len = ppc_md.nvram_read(tmp_buffer, count, ppos); - if ((long)len <= 0) { - kfree(tmp_buffer); - return len; - } + ret = ppc_md.nvram_read(tmp, count, ppos); + if (ret <= 0) + goto out; - if (copy_to_user(buf, tmp_buffer, len)) { - kfree(tmp_buffer); - return -EFAULT; - } + if (copy_to_user(buf, tmp, ret)) + ret = -EFAULT; - kfree(tmp_buffer); - return len; +out: + kfree(tmp); + return ret; } static ssize_t dev_nvram_write(struct file *file, const char __user *buf, - size_t count, loff_t *ppos) + size_t count, loff_t *ppos) { - ssize_t len; - char * tmp_buffer; - int size; + ssize_t ret; + char *tmp = NULL; + ssize_t size; - if (ppc_md.nvram_size == NULL) - return -ENODEV; + ret = -ENODEV; + if (!ppc_md.nvram_size) + goto out; + + ret = 0; size = ppc_md.nvram_size(); + if (*ppos >= size || size < 0) + goto out; - if (!access_ok(VERIFY_READ, buf, count)) - return -EFAULT; - if (*ppos >= size) - return 0; - if (count > size) - count = size; + count = min_t(size_t, count, size - *ppos); + count = min(count, PAGE_SIZE); - tmp_buffer = (char *) kmalloc(count, GFP_KERNEL); - if (!tmp_buffer) { - printk(KERN_ERR "dev_nvram_write: kmalloc failed\n"); - return -ENOMEM; - } - - if (copy_from_user(tmp_buffer, buf, count)) { - kfree(tmp_buffer); - return -EFAULT; - } + ret = -ENOMEM; + tmp = kmalloc(count, GFP_KERNEL); + if (!tmp) + goto out; - len = ppc_md.nvram_write(tmp_buffer, count, ppos); - if ((long)len <= 0) { - kfree(tmp_buffer); - return len; - } + ret = -EFAULT; + if (copy_from_user(tmp, buf, count)) + goto out; + + ret = ppc_md.nvram_write(tmp, count, ppos); + +out: + kfree(tmp); + return ret; - kfree(tmp_buffer); - return len; } static int dev_nvram_ioctl(struct inode *inode, struct file *file, diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c index a7b68f9..999bdd8 100644 --- a/arch/powerpc/kernel/paca.c +++ b/arch/powerpc/kernel/paca.c @@ -17,6 +17,7 @@ #include <asm/page.h> #include <asm/lppaca.h> #include <asm/iseries/it_lp_queue.h> +#include <asm/iseries/it_lp_reg_save.h> #include <asm/paca.h> @@ -26,8 +27,7 @@ extern unsigned long __toc_start; /* The Paca is an array with one entry per processor. Each contains an * lppaca, which contains the information shared between the - * hypervisor and Linux. Each also contains an ItLpRegSave area which - * is used by the hypervisor to save registers. + * hypervisor and Linux. * On systems with hardware multi-threading, there are two threads * per processor. The Paca array must contain an entry for each thread. * The VPD Areas will give a max logical processors = 2 * max physical @@ -37,7 +37,6 @@ extern unsigned long __toc_start; #define PACA_INIT_COMMON(number, start, asrr, asrv) \ .lock_token = 0x8000, \ .paca_index = (number), /* Paca Index */ \ - .default_decr = 0x00ff0000, /* Initial Decr */ \ .kernel_toc = (unsigned long)(&__toc_start) + 0x8000UL, \ .stab_real = (asrr), /* Real pointer to segment table */ \ .stab_addr = (asrv), /* Virt pointer to segment table */ \ @@ -57,11 +56,7 @@ extern unsigned long __toc_start; #ifdef CONFIG_PPC_ISERIES #define PACA_INIT_ISERIES(number) \ .lppaca_ptr = &paca[number].lppaca, \ - .reg_save_ptr = &paca[number].reg_save, \ - .reg_save = { \ - .xDesc = 0xd397d9e2, /* "LpRS" */ \ - .xSize = sizeof(struct ItLpRegSave) \ - } + .reg_save_ptr = &iseries_reg_save[number], #define PACA_INIT(number) \ { \ diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index 8b6008a..fc60a77 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -34,7 +34,7 @@ #ifdef DEBUG #include <asm/udbg.h> -#define DBG(fmt...) udbg_printf(fmt) +#define DBG(fmt...) printk(fmt) #else #define DBG(fmt...) #endif @@ -251,7 +251,7 @@ void pcibios_free_controller(struct pci_controller *phb) kfree(phb); } -static void __init pcibios_claim_one_bus(struct pci_bus *b) +void __devinit pcibios_claim_one_bus(struct pci_bus *b) { struct pci_dev *dev; struct pci_bus *child_bus; @@ -323,6 +323,7 @@ static void pci_parse_of_addrs(struct device_node *node, struct pci_dev *dev) addrs = (u32 *) get_property(node, "assigned-addresses", &proplen); if (!addrs) return; + DBG(" parse addresses (%d bytes) @ %p\n", proplen, addrs); for (; proplen >= 20; proplen -= 20, addrs += 5) { flags = pci_parse_of_flags(addrs[0]); if (!flags) @@ -332,6 +333,9 @@ static void pci_parse_of_addrs(struct device_node *node, struct pci_dev *dev) if (!size) continue; i = addrs[0] & 0xff; + DBG(" base: %llx, size: %llx, i: %x\n", + (unsigned long long)base, (unsigned long long)size, i); + if (PCI_BASE_ADDRESS_0 <= i && i <= PCI_BASE_ADDRESS_5) { res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2]; } else if (i == dev->rom_base_reg) { @@ -362,6 +366,8 @@ struct pci_dev *of_create_pci_dev(struct device_node *node, if (type == NULL) type = ""; + DBG(" create device, devfn: %x, type: %s\n", devfn, type); + memset(dev, 0, sizeof(struct pci_dev)); dev->bus = bus; dev->sysdata = node; @@ -381,6 +387,8 @@ struct pci_dev *of_create_pci_dev(struct device_node *node, dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn)); dev->class = get_int_prop(node, "class-code", 0); + DBG(" class: 0x%x\n", dev->class); + dev->current_state = 4; /* unknown power state */ if (!strcmp(type, "pci")) { @@ -402,6 +410,8 @@ struct pci_dev *of_create_pci_dev(struct device_node *node, pci_parse_of_addrs(node, dev); + DBG(" adding to system ...\n"); + pci_device_add(dev, bus); /* XXX pci_scan_msi_device(dev); */ @@ -418,15 +428,21 @@ void __devinit of_scan_bus(struct device_node *node, int reglen, devfn; struct pci_dev *dev; + DBG("of_scan_bus(%s) bus no %d... \n", node->full_name, bus->number); + while ((child = of_get_next_child(node, child)) != NULL) { + DBG(" * %s\n", child->full_name); reg = (u32 *) get_property(child, "reg", ®len); if (reg == NULL || reglen < 20) continue; devfn = (reg[0] >> 8) & 0xff; + /* create a new pci_dev for this device */ dev = of_create_pci_dev(child, bus, devfn); if (!dev) continue; + DBG("dev header type: %x\n", dev->hdr_type); + if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE || dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) of_scan_pci_bridge(child, dev); @@ -446,16 +462,18 @@ void __devinit of_scan_pci_bridge(struct device_node *node, unsigned int flags; u64 size; + DBG("of_scan_pci_bridge(%s)\n", node->full_name); + /* parse bus-range property */ busrange = (u32 *) get_property(node, "bus-range", &len); if (busrange == NULL || len != 8) { - printk(KERN_ERR "Can't get bus-range for PCI-PCI bridge %s\n", + printk(KERN_DEBUG "Can't get bus-range for PCI-PCI bridge %s\n", node->full_name); return; } ranges = (u32 *) get_property(node, "ranges", &len); if (ranges == NULL) { - printk(KERN_ERR "Can't get ranges for PCI-PCI bridge %s\n", + printk(KERN_DEBUG "Can't get ranges for PCI-PCI bridge %s\n", node->full_name); return; } @@ -509,10 +527,13 @@ void __devinit of_scan_pci_bridge(struct device_node *node, } sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus), bus->number); + DBG(" bus name: %s\n", bus->name); mode = PCI_PROBE_NORMAL; if (ppc_md.pci_probe_mode) mode = ppc_md.pci_probe_mode(bus); + DBG(" probe mode: %d\n", mode); + if (mode == PCI_PROBE_DEVTREE) of_scan_bus(node, bus); else if (mode == PCI_PROBE_NORMAL) @@ -528,6 +549,8 @@ void __devinit scan_phb(struct pci_controller *hose) int i, mode; struct resource *res; + DBG("Scanning PHB %s\n", node ? node->full_name : "<NO NAME>"); + bus = pci_create_bus(NULL, hose->first_busno, hose->ops, node); if (bus == NULL) { printk(KERN_ERR "Failed to create bus for PCI domain %04x\n", @@ -552,8 +575,9 @@ void __devinit scan_phb(struct pci_controller *hose) mode = PCI_PROBE_NORMAL; #ifdef CONFIG_PPC_MULTIPLATFORM - if (ppc_md.pci_probe_mode) + if (node && ppc_md.pci_probe_mode) mode = ppc_md.pci_probe_mode(bus); + DBG(" probe mode: %d\n", mode); if (mode == PCI_PROBE_DEVTREE) { bus->subordinate = hose->last_busno; of_scan_bus(node, bus); @@ -842,8 +866,7 @@ pgprot_t pci_phys_mem_access_prot(struct file *file, * Returns a negative error code on failure, zero on success. */ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, - enum pci_mmap_state mmap_state, - int write_combine) + enum pci_mmap_state mmap_state, int write_combine) { unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; struct resource *rp; @@ -896,6 +919,25 @@ static void __devinit pci_process_ISA_OF_ranges(struct device_node *isa_node, unsigned long phb_io_base_phys, void __iomem * phb_io_base_virt) { + /* Remove these asap */ + + struct pci_address { + u32 a_hi; + u32 a_mid; + u32 a_lo; + }; + + struct isa_address { + u32 a_hi; + u32 a_lo; + }; + + struct isa_range { + struct isa_address isa_addr; + struct pci_address pci_addr; + unsigned int size; + }; + struct isa_range *range; unsigned long pci_addr; unsigned int isa_addr; @@ -1223,6 +1265,7 @@ void __devinit pcibios_fixup_device_resources(struct pci_dev *dev, } EXPORT_SYMBOL(pcibios_fixup_device_resources); + static void __devinit do_bus_setup(struct pci_bus *bus) { struct pci_dev *dev; @@ -1306,8 +1349,38 @@ void pci_resource_to_user(const struct pci_dev *dev, int bar, *end = rsrc->end + offset; } +struct pci_controller* pci_find_hose_for_OF_device(struct device_node* node) +{ + if (!have_of) + return NULL; + while(node) { + struct pci_controller *hose, *tmp; + list_for_each_entry_safe(hose, tmp, &hose_list, list_node) + if (hose->arch_data == node) + return hose; + node = node->parent; + } + return NULL; +} + #endif /* CONFIG_PPC_MULTIPLATFORM */ +unsigned long pci_address_to_pio(phys_addr_t address) +{ + struct pci_controller *hose, *tmp; + + list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { + if (address >= hose->io_base_phys && + address < (hose->io_base_phys + hose->pci_io_size)) { + unsigned long base = + (unsigned long)hose->io_base_virt - pci_io_base; + return base + (address - hose->io_base_phys); + } + } + return (unsigned int)-1; +} +EXPORT_SYMBOL_GPL(pci_address_to_pio); + #define IOBASE_BRIDGE_NUMBER 0 #define IOBASE_MEMORY 1 diff --git a/arch/powerpc/kernel/pmc.c b/arch/powerpc/kernel/pmc.c index 2d333cc..e6fb194 100644 --- a/arch/powerpc/kernel/pmc.c +++ b/arch/powerpc/kernel/pmc.c @@ -43,8 +43,13 @@ static void dummy_perf(struct pt_regs *regs) mtspr(SPRN_MMCR0, mmcr0); } #else +/* Ensure exceptions are disabled */ static void dummy_perf(struct pt_regs *regs) { + unsigned int mmcr0 = mfspr(SPRN_MMCR0); + + mmcr0 &= ~(MMCR0_PMXE); + mtspr(SPRN_MMCR0, mmcr0); } #endif diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index 94db257..b275814 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -76,11 +76,6 @@ EXPORT_SYMBOL(single_step_exception); EXPORT_SYMBOL(sys_sigreturn); #endif -#if defined(CONFIG_PPC_PREP) -EXPORT_SYMBOL(_prep_type); -EXPORT_SYMBOL(ucSystemType); -#endif - EXPORT_SYMBOL(strcpy); EXPORT_SYMBOL(strncpy); EXPORT_SYMBOL(strcat); diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 3bf968e..977ee3a 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -29,6 +29,7 @@ #include <linux/initrd.h> #include <linux/bitops.h> #include <linux/module.h> +#include <linux/kexec.h> #include <asm/prom.h> #include <asm/rtas.h> @@ -37,6 +38,7 @@ #include <asm/processor.h> #include <asm/irq.h> #include <asm/io.h> +#include <asm/kdump.h> #include <asm/smp.h> #include <asm/system.h> #include <asm/mmu.h> @@ -55,21 +57,6 @@ #define DBG(fmt...) #endif -struct pci_reg_property { - struct pci_address addr; - u32 size_hi; - u32 size_lo; -}; - -struct isa_reg_property { - u32 space; - u32 address; - u32 size; -}; - - -typedef int interpret_func(struct device_node *, unsigned long *, - int, int, int); static int __initdata dt_root_addr_cells; static int __initdata dt_root_size_cells; @@ -311,6 +298,16 @@ static int __devinit finish_node_interrupts(struct device_node *np, int i, j, n, sense; unsigned int *irq, virq; struct device_node *ic; + int trace = 0; + + //#define TRACE(fmt...) do { if (trace) { printk(fmt); mdelay(1000); } } while(0) +#define TRACE(fmt...) + + if (!strcmp(np->name, "smu-doorbell")) + trace = 1; + + TRACE("Finishing SMU doorbell ! num_interrupt_controllers = %d\n", + num_interrupt_controllers); if (num_interrupt_controllers == 0) { /* @@ -345,11 +342,12 @@ static int __devinit finish_node_interrupts(struct device_node *np, } ints = (unsigned int *) get_property(np, "interrupts", &intlen); + TRACE("ints=%p, intlen=%d\n", ints, intlen); if (ints == NULL) return 0; intrcells = prom_n_intr_cells(np); intlen /= intrcells * sizeof(unsigned int); - + TRACE("intrcells=%d, new intlen=%d\n", intrcells, intlen); np->intrs = prom_alloc(intlen * sizeof(*(np->intrs)), mem_start); if (!np->intrs) return -ENOMEM; @@ -360,6 +358,7 @@ static int __devinit finish_node_interrupts(struct device_node *np, intrcount = 0; for (i = 0; i < intlen; ++i, ints += intrcells) { n = map_interrupt(&irq, &ic, np, ints, intrcells); + TRACE("map, irq=%d, ic=%p, n=%d\n", irq, ic, n); if (n <= 0) continue; @@ -370,6 +369,7 @@ static int __devinit finish_node_interrupts(struct device_node *np, np->intrs[intrcount].sense = map_isa_senses[sense]; } else { virq = virt_irq_create_mapping(irq[0]); + TRACE("virq=%d\n", virq); #ifdef CONFIG_PPC64 if (virq == NO_IRQ) { printk(KERN_CRIT "Could not allocate interrupt" @@ -379,6 +379,12 @@ static int __devinit finish_node_interrupts(struct device_node *np, #endif np->intrs[intrcount].line = irq_offset_up(virq); sense = (n > 1)? (irq[1] & 3): 1; + + /* Apple uses bits in there in a different way, let's + * only keep the real sense bit on macs + */ + if (_machine == PLATFORM_POWERMAC) + sense &= 0x1; np->intrs[intrcount].sense = map_mpic_senses[sense]; } @@ -388,12 +394,13 @@ static int __devinit finish_node_interrupts(struct device_node *np, char *name = get_property(ic->parent, "name", NULL); if (name && !strcmp(name, "u3")) np->intrs[intrcount].line += 128; - else if (!(name && !strcmp(name, "mac-io"))) + else if (!(name && (!strcmp(name, "mac-io") || + !strcmp(name, "u4")))) /* ignore other cascaded controllers, such as the k2-sata-root */ break; } -#endif +#endif /* CONFIG_PPC64 */ if (n > 2) { printk("hmmm, got %d intr cells for %s:", n, np->full_name); @@ -408,234 +415,19 @@ static int __devinit finish_node_interrupts(struct device_node *np, return 0; } -static int __devinit interpret_pci_props(struct device_node *np, - unsigned long *mem_start, - int naddrc, int nsizec, - int measure_only) -{ - struct address_range *adr; - struct pci_reg_property *pci_addrs; - int i, l, n_addrs; - - pci_addrs = (struct pci_reg_property *) - get_property(np, "assigned-addresses", &l); - if (!pci_addrs) - return 0; - - n_addrs = l / sizeof(*pci_addrs); - - adr = prom_alloc(n_addrs * sizeof(*adr), mem_start); - if (!adr) - return -ENOMEM; - - if (measure_only) - return 0; - - np->addrs = adr; - np->n_addrs = n_addrs; - - for (i = 0; i < n_addrs; i++) { - adr[i].space = pci_addrs[i].addr.a_hi; - adr[i].address = pci_addrs[i].addr.a_lo | - ((u64)pci_addrs[i].addr.a_mid << 32); - adr[i].size = pci_addrs[i].size_lo; - } - - return 0; -} - -static int __init interpret_dbdma_props(struct device_node *np, - unsigned long *mem_start, - int naddrc, int nsizec, - int measure_only) -{ - struct reg_property32 *rp; - struct address_range *adr; - unsigned long base_address; - int i, l; - struct device_node *db; - - base_address = 0; - if (!measure_only) { - for (db = np->parent; db != NULL; db = db->parent) { - if (!strcmp(db->type, "dbdma") && db->n_addrs != 0) { - base_address = db->addrs[0].address; - break; - } - } - } - - rp = (struct reg_property32 *) get_property(np, "reg", &l); - if (rp != 0 && l >= sizeof(struct reg_property32)) { - i = 0; - adr = (struct address_range *) (*mem_start); - while ((l -= sizeof(struct reg_property32)) >= 0) { - if (!measure_only) { - adr[i].space = 2; - adr[i].address = rp[i].address + base_address; - adr[i].size = rp[i].size; - } - ++i; - } - np->addrs = adr; - np->n_addrs = i; - (*mem_start) += i * sizeof(struct address_range); - } - - return 0; -} - -static int __init interpret_macio_props(struct device_node *np, - unsigned long *mem_start, - int naddrc, int nsizec, - int measure_only) -{ - struct reg_property32 *rp; - struct address_range *adr; - unsigned long base_address; - int i, l; - struct device_node *db; - - base_address = 0; - if (!measure_only) { - for (db = np->parent; db != NULL; db = db->parent) { - if (!strcmp(db->type, "mac-io") && db->n_addrs != 0) { - base_address = db->addrs[0].address; - break; - } - } - } - - rp = (struct reg_property32 *) get_property(np, "reg", &l); - if (rp != 0 && l >= sizeof(struct reg_property32)) { - i = 0; - adr = (struct address_range *) (*mem_start); - while ((l -= sizeof(struct reg_property32)) >= 0) { - if (!measure_only) { - adr[i].space = 2; - adr[i].address = rp[i].address + base_address; - adr[i].size = rp[i].size; - } - ++i; - } - np->addrs = adr; - np->n_addrs = i; - (*mem_start) += i * sizeof(struct address_range); - } - - return 0; -} - -static int __init interpret_isa_props(struct device_node *np, - unsigned long *mem_start, - int naddrc, int nsizec, - int measure_only) -{ - struct isa_reg_property *rp; - struct address_range *adr; - int i, l; - - rp = (struct isa_reg_property *) get_property(np, "reg", &l); - if (rp != 0 && l >= sizeof(struct isa_reg_property)) { - i = 0; - adr = (struct address_range *) (*mem_start); - while ((l -= sizeof(struct isa_reg_property)) >= 0) { - if (!measure_only) { - adr[i].space = rp[i].space; - adr[i].address = rp[i].address; - adr[i].size = rp[i].size; - } - ++i; - } - np->addrs = adr; - np->n_addrs = i; - (*mem_start) += i * sizeof(struct address_range); - } - - return 0; -} - -static int __init interpret_root_props(struct device_node *np, - unsigned long *mem_start, - int naddrc, int nsizec, - int measure_only) -{ - struct address_range *adr; - int i, l; - unsigned int *rp; - int rpsize = (naddrc + nsizec) * sizeof(unsigned int); - - rp = (unsigned int *) get_property(np, "reg", &l); - if (rp != 0 && l >= rpsize) { - i = 0; - adr = (struct address_range *) (*mem_start); - while ((l -= rpsize) >= 0) { - if (!measure_only) { - adr[i].space = 0; - adr[i].address = rp[naddrc - 1]; - adr[i].size = rp[naddrc + nsizec - 1]; - } - ++i; - rp += naddrc + nsizec; - } - np->addrs = adr; - np->n_addrs = i; - (*mem_start) += i * sizeof(struct address_range); - } - - return 0; -} - static int __devinit finish_node(struct device_node *np, unsigned long *mem_start, - interpret_func *ifunc, - int naddrc, int nsizec, int measure_only) { struct device_node *child; - int *ip, rc = 0; - - /* get the device addresses and interrupts */ - if (ifunc != NULL) - rc = ifunc(np, mem_start, naddrc, nsizec, measure_only); - if (rc) - goto out; + int rc = 0; rc = finish_node_interrupts(np, mem_start, measure_only); if (rc) goto out; - /* Look for #address-cells and #size-cells properties. */ - ip = (int *) get_property(np, "#address-cells", NULL); - if (ip != NULL) - naddrc = *ip; - ip = (int *) get_property(np, "#size-cells", NULL); - if (ip != NULL) - nsizec = *ip; - - if (!strcmp(np->name, "device-tree") || np->parent == NULL) - ifunc = interpret_root_props; - else if (np->type == 0) - ifunc = NULL; - else if (!strcmp(np->type, "pci") || !strcmp(np->type, "vci")) - ifunc = interpret_pci_props; - else if (!strcmp(np->type, "dbdma")) - ifunc = interpret_dbdma_props; - else if (!strcmp(np->type, "mac-io") || ifunc == interpret_macio_props) - ifunc = interpret_macio_props; - else if (!strcmp(np->type, "isa")) - ifunc = interpret_isa_props; - else if (!strcmp(np->name, "uni-n") || !strcmp(np->name, "u3")) - ifunc = interpret_root_props; - else if (!((ifunc == interpret_dbdma_props - || ifunc == interpret_macio_props) - && (!strcmp(np->type, "escc") - || !strcmp(np->type, "media-bay")))) - ifunc = NULL; - for (child = np->child; child != NULL; child = child->sibling) { - rc = finish_node(child, mem_start, ifunc, - naddrc, nsizec, measure_only); + rc = finish_node(child, mem_start, measure_only); if (rc) goto out; } @@ -697,10 +489,10 @@ void __init finish_device_tree(void) * reason and then remove those additional 16 bytes */ size = 16; - finish_node(allnodes, &size, NULL, 0, 0, 1); + finish_node(allnodes, &size, 1); size -= 16; end = start = (unsigned long) __va(lmb_alloc(size, 128)); - finish_node(allnodes, &end, NULL, 0, 0, 0); + finish_node(allnodes, &end, 0); BUG_ON(end != start + size); DBG(" <- finish_device_tree\n"); @@ -1197,6 +989,16 @@ static int __init early_init_dt_scan_chosen(unsigned long node, } #endif /* CONFIG_PPC_RTAS */ +#ifdef CONFIG_KEXEC + lprop = (u64*)of_get_flat_dt_prop(node, "linux,crashkernel-base", NULL); + if (lprop) + crashk_res.start = *lprop; + + lprop = (u64*)of_get_flat_dt_prop(node, "linux,crashkernel-size", NULL); + if (lprop) + crashk_res.end = crashk_res.start + *lprop - 1; +#endif + /* break now */ return 1; } @@ -1263,7 +1065,9 @@ static int __init early_init_dt_scan_memory(unsigned long node, } else if (strcmp(type, "memory") != 0) return 0; - reg = (cell_t *)of_get_flat_dt_prop(node, "reg", &l); + reg = (cell_t *)of_get_flat_dt_prop(node, "linux,usable-memory", &l); + if (reg == NULL) + reg = (cell_t *)of_get_flat_dt_prop(node, "reg", &l); if (reg == NULL) return 0; @@ -1335,11 +1139,14 @@ void __init early_init_devtree(void *params) of_scan_flat_dt(early_init_dt_scan_memory, NULL); lmb_enforce_memory_limit(memory_limit); lmb_analyze(); - lmb_reserve(0, __pa(klimit)); DBG("Phys. mem: %lx\n", lmb_phys_mem_size()); /* Reserve LMB regions used by kernel, initrd, dt, etc... */ + lmb_reserve(PHYSICAL_START, __pa(klimit) - PHYSICAL_START); +#ifdef CONFIG_CRASH_DUMP + lmb_reserve(0, KDUMP_RESERVE_LIMIT); +#endif early_reserve_mem(); DBG("Scanning CPUs ...\n"); @@ -1802,7 +1609,6 @@ static void of_node_release(struct kref *kref) prop = next; } kfree(node->intrs); - kfree(node->addrs); kfree(node->full_name); kfree(node->data); kfree(node); @@ -1884,9 +1690,7 @@ void of_detach_node(const struct device_node *np) * This should probably be split up into smaller chunks. */ -static int of_finish_dynamic_node(struct device_node *node, - unsigned long *unused1, int unused2, - int unused3, int unused4) +static int of_finish_dynamic_node(struct device_node *node) { struct device_node *parent = of_get_parent(node); int err = 0; @@ -1907,7 +1711,8 @@ static int of_finish_dynamic_node(struct device_node *node, return -ENODEV; /* fix up new node's linux_phandle field */ - if ((ibm_phandle = (unsigned int *)get_property(node, "ibm,phandle", NULL))) + if ((ibm_phandle = (unsigned int *)get_property(node, + "ibm,phandle", NULL))) node->linux_phandle = *ibm_phandle; out: @@ -1922,7 +1727,9 @@ static int prom_reconfig_notifier(struct notifier_block *nb, switch (action) { case PSERIES_RECONFIG_ADD: - err = finish_node(node, NULL, of_finish_dynamic_node, 0, 0, 0); + err = of_finish_dynamic_node(node); + if (!err) + finish_node(node, NULL, 0); if (err < 0) { printk(KERN_ERR "finish_node returned %d\n", err); err = NOTIFY_BAD; @@ -1996,175 +1803,4 @@ int prom_add_property(struct device_node* np, struct property* prop) return 0; } -/* I quickly hacked that one, check against spec ! */ -static inline unsigned long -bus_space_to_resource_flags(unsigned int bus_space) -{ - u8 space = (bus_space >> 24) & 0xf; - if (space == 0) - space = 0x02; - if (space == 0x02) - return IORESOURCE_MEM; - else if (space == 0x01) - return IORESOURCE_IO; - else { - printk(KERN_WARNING "prom.c: bus_space_to_resource_flags(), space: %x\n", - bus_space); - return 0; - } -} - -#ifdef CONFIG_PCI -static struct resource *find_parent_pci_resource(struct pci_dev* pdev, - struct address_range *range) -{ - unsigned long mask; - int i; - - /* Check this one */ - mask = bus_space_to_resource_flags(range->space); - for (i=0; i<DEVICE_COUNT_RESOURCE; i++) { - if ((pdev->resource[i].flags & mask) == mask && - pdev->resource[i].start <= range->address && - pdev->resource[i].end > range->address) { - if ((range->address + range->size - 1) > pdev->resource[i].end) { - /* Add better message */ - printk(KERN_WARNING "PCI/OF resource overlap !\n"); - return NULL; - } - break; - } - } - if (i == DEVICE_COUNT_RESOURCE) - return NULL; - return &pdev->resource[i]; -} - -/* - * Request an OF device resource. Currently handles child of PCI devices, - * or other nodes attached to the root node. Ultimately, put some - * link to resources in the OF node. - */ -struct resource *request_OF_resource(struct device_node* node, int index, - const char* name_postfix) -{ - struct pci_dev* pcidev; - u8 pci_bus, pci_devfn; - unsigned long iomask; - struct device_node* nd; - struct resource* parent; - struct resource *res = NULL; - int nlen, plen; - - if (index >= node->n_addrs) - goto fail; - - /* Sanity check on bus space */ - iomask = bus_space_to_resource_flags(node->addrs[index].space); - if (iomask & IORESOURCE_MEM) - parent = &iomem_resource; - else if (iomask & IORESOURCE_IO) - parent = &ioport_resource; - else - goto fail; - - /* Find a PCI parent if any */ - nd = node; - pcidev = NULL; - while (nd) { - if (!pci_device_from_OF_node(nd, &pci_bus, &pci_devfn)) - pcidev = pci_find_slot(pci_bus, pci_devfn); - if (pcidev) break; - nd = nd->parent; - } - if (pcidev) - parent = find_parent_pci_resource(pcidev, &node->addrs[index]); - if (!parent) { - printk(KERN_WARNING "request_OF_resource(%s), parent not found\n", - node->name); - goto fail; - } - res = __request_region(parent, node->addrs[index].address, - node->addrs[index].size, NULL); - if (!res) - goto fail; - nlen = strlen(node->name); - plen = name_postfix ? strlen(name_postfix) : 0; - res->name = (const char *)kmalloc(nlen+plen+1, GFP_KERNEL); - if (res->name) { - strcpy((char *)res->name, node->name); - if (plen) - strcpy((char *)res->name+nlen, name_postfix); - } - return res; -fail: - return NULL; -} -EXPORT_SYMBOL(request_OF_resource); - -int release_OF_resource(struct device_node *node, int index) -{ - struct pci_dev* pcidev; - u8 pci_bus, pci_devfn; - unsigned long iomask, start, end; - struct device_node* nd; - struct resource* parent; - struct resource *res = NULL; - - if (index >= node->n_addrs) - return -EINVAL; - - /* Sanity check on bus space */ - iomask = bus_space_to_resource_flags(node->addrs[index].space); - if (iomask & IORESOURCE_MEM) - parent = &iomem_resource; - else if (iomask & IORESOURCE_IO) - parent = &ioport_resource; - else - return -EINVAL; - - /* Find a PCI parent if any */ - nd = node; - pcidev = NULL; - while(nd) { - if (!pci_device_from_OF_node(nd, &pci_bus, &pci_devfn)) - pcidev = pci_find_slot(pci_bus, pci_devfn); - if (pcidev) break; - nd = nd->parent; - } - if (pcidev) - parent = find_parent_pci_resource(pcidev, &node->addrs[index]); - if (!parent) { - printk(KERN_WARNING "release_OF_resource(%s), parent not found\n", - node->name); - return -ENODEV; - } - - /* Find us in the parent and its childs */ - res = parent->child; - start = node->addrs[index].address; - end = start + node->addrs[index].size - 1; - while (res) { - if (res->start == start && res->end == end && - (res->flags & IORESOURCE_BUSY)) - break; - if (res->start <= start && res->end >= end) - res = res->child; - else - res = res->sibling; - } - if (!res) - return -ENODEV; - - if (res->name) { - kfree(res->name); - res->name = NULL; - } - release_resource(res); - kfree(res); - - return 0; -} -EXPORT_SYMBOL(release_OF_resource); -#endif /* CONFIG_PCI */ diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index bcdc209..e381f2f 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -192,6 +192,11 @@ static unsigned long __initdata alloc_bottom; static unsigned long __initdata rmo_top; static unsigned long __initdata ram_top; +#ifdef CONFIG_KEXEC +static unsigned long __initdata prom_crashk_base; +static unsigned long __initdata prom_crashk_size; +#endif + static struct mem_map_entry __initdata mem_reserve_map[MEM_RESERVE_MAP_SIZE]; static int __initdata mem_reserve_cnt; @@ -553,7 +558,8 @@ unsigned long prom_memparse(const char *ptr, const char **retptr) static void __init early_cmdline_parse(void) { struct prom_t *_prom = &RELOC(prom); - char *opt, *p; + const char *opt; + char *p; int l = 0; RELOC(prom_cmd_line[0]) = 0; @@ -590,6 +596,34 @@ static void __init early_cmdline_parse(void) RELOC(prom_memory_limit) = ALIGN(RELOC(prom_memory_limit), 0x1000000); #endif } + +#ifdef CONFIG_KEXEC + /* + * crashkernel=size@addr specifies the location to reserve for + * crash kernel. + */ + opt = strstr(RELOC(prom_cmd_line), RELOC("crashkernel=")); + if (opt) { + opt += 12; + RELOC(prom_crashk_size) = prom_memparse(opt, &opt); + + if (ALIGN(RELOC(prom_crashk_size), 0x1000000) != + RELOC(prom_crashk_size)) { + prom_printf("Warning: crashkernel size is not " + "aligned to 16MB\n"); + } + + /* + * At present, the crash kernel always run at 32MB. + * Just ignore whatever user passed. + */ + RELOC(prom_crashk_base) = 0x2000000; + if (*opt == '@') { + prom_printf("Warning: PPC64 kdump kernel always runs " + "at 32 MB\n"); + } + } +#endif } #ifdef CONFIG_PPC_PSERIES @@ -1011,6 +1045,12 @@ static void __init prom_init_mem(void) prom_printf(" alloc_top_hi : %x\n", RELOC(alloc_top_high)); prom_printf(" rmo_top : %x\n", RELOC(rmo_top)); prom_printf(" ram_top : %x\n", RELOC(ram_top)); +#ifdef CONFIG_KEXEC + if (RELOC(prom_crashk_base)) { + prom_printf(" crashk_base : %x\n", RELOC(prom_crashk_base)); + prom_printf(" crashk_size : %x\n", RELOC(prom_crashk_size)); + } +#endif } @@ -1500,6 +1540,8 @@ static int __init prom_find_machine_type(void) #ifdef CONFIG_PPC64 if (strstr(p, RELOC("Momentum,Maple"))) return PLATFORM_MAPLE; + if (strstr(p, RELOC("IBM,CPB"))) + return PLATFORM_CELL; #endif i += sl + 1; } @@ -1994,7 +2036,7 @@ static void __init prom_check_initrd(unsigned long r3, unsigned long r4) if (r3 && r4 && r4 != 0xdeadbeef) { unsigned long val; - RELOC(prom_initrd_start) = (r3 >= KERNELBASE) ? __pa(r3) : r3; + RELOC(prom_initrd_start) = is_kernel_addr(r3) ? __pa(r3) : r3; RELOC(prom_initrd_end) = RELOC(prom_initrd_start) + r4; val = RELOC(prom_initrd_start); @@ -2094,6 +2136,10 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, */ prom_init_mem(); +#ifdef CONFIG_KEXEC + if (RELOC(prom_crashk_base)) + reserve_mem(RELOC(prom_crashk_base), RELOC(prom_crashk_size)); +#endif /* * Determine which cpu is actually running right _now_ */ @@ -2150,6 +2196,16 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, } #endif +#ifdef CONFIG_KEXEC + if (RELOC(prom_crashk_base)) { + prom_setprop(_prom->chosen, "/chosen", "linux,crashkernel-base", + PTRRELOC(&prom_crashk_base), + sizeof(RELOC(prom_crashk_base))); + prom_setprop(_prom->chosen, "/chosen", "linux,crashkernel-size", + PTRRELOC(&prom_crashk_size), + sizeof(RELOC(prom_crashk_size))); + } +#endif /* * Fixup any known bugs in the device-tree */ diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c new file mode 100644 index 0000000..309ae1d --- /dev/null +++ b/arch/powerpc/kernel/prom_parse.c @@ -0,0 +1,547 @@ +#undef DEBUG + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/pci_regs.h> +#include <linux/module.h> +#include <linux/ioport.h> +#include <asm/prom.h> +#include <asm/pci-bridge.h> + +#ifdef DEBUG +#define DBG(fmt...) do { printk(fmt); } while(0) +#else +#define DBG(fmt...) do { } while(0) +#endif + +#ifdef CONFIG_PPC64 +#define PRu64 "%lx" +#else +#define PRu64 "%llx" +#endif + +/* Max address size we deal with */ +#define OF_MAX_ADDR_CELLS 4 +#define OF_CHECK_COUNTS(na, ns) ((na) > 0 && (na) <= OF_MAX_ADDR_CELLS && \ + (ns) > 0) + +/* Debug utility */ +#ifdef DEBUG +static void of_dump_addr(const char *s, u32 *addr, int na) +{ + printk("%s", s); + while(na--) + printk(" %08x", *(addr++)); + printk("\n"); +} +#else +static void of_dump_addr(const char *s, u32 *addr, int na) { } +#endif + +/* Read a big address */ +static inline u64 of_read_addr(u32 *cell, int size) +{ + u64 r = 0; + while (size--) + r = (r << 32) | *(cell++); + return r; +} + +/* Callbacks for bus specific translators */ +struct of_bus { + const char *name; + const char *addresses; + int (*match)(struct device_node *parent); + void (*count_cells)(struct device_node *child, + int *addrc, int *sizec); + u64 (*map)(u32 *addr, u32 *range, int na, int ns, int pna); + int (*translate)(u32 *addr, u64 offset, int na); + unsigned int (*get_flags)(u32 *addr); +}; + + +/* + * Default translator (generic bus) + */ + +static void of_bus_default_count_cells(struct device_node *dev, + int *addrc, int *sizec) +{ + if (addrc) + *addrc = prom_n_addr_cells(dev); + if (sizec) + *sizec = prom_n_size_cells(dev); +} + +static u64 of_bus_default_map(u32 *addr, u32 *range, int na, int ns, int pna) +{ + u64 cp, s, da; + + cp = of_read_addr(range, na); + s = of_read_addr(range + na + pna, ns); + da = of_read_addr(addr, na); + + DBG("OF: default map, cp="PRu64", s="PRu64", da="PRu64"\n", + cp, s, da); + + if (da < cp || da >= (cp + s)) + return OF_BAD_ADDR; + return da - cp; +} + +static int of_bus_default_translate(u32 *addr, u64 offset, int na) +{ + u64 a = of_read_addr(addr, na); + memset(addr, 0, na * 4); + a += offset; + if (na > 1) + addr[na - 2] = a >> 32; + addr[na - 1] = a & 0xffffffffu; + + return 0; +} + +static unsigned int of_bus_default_get_flags(u32 *addr) +{ + return IORESOURCE_MEM; +} + + +/* + * PCI bus specific translator + */ + +static int of_bus_pci_match(struct device_node *np) +{ + return !strcmp(np->type, "pci"); +} + +static void of_bus_pci_count_cells(struct device_node *np, + int *addrc, int *sizec) +{ + if (addrc) + *addrc = 3; + if (sizec) + *sizec = 2; +} + +static u64 of_bus_pci_map(u32 *addr, u32 *range, int na, int ns, int pna) +{ + u64 cp, s, da; + + /* Check address type match */ + if ((addr[0] ^ range[0]) & 0x03000000) + return OF_BAD_ADDR; + + /* Read address values, skipping high cell */ + cp = of_read_addr(range + 1, na - 1); + s = of_read_addr(range + na + pna, ns); + da = of_read_addr(addr + 1, na - 1); + + DBG("OF: PCI map, cp="PRu64", s="PRu64", da="PRu64"\n", cp, s, da); + + if (da < cp || da >= (cp + s)) + return OF_BAD_ADDR; + return da - cp; +} + +static int of_bus_pci_translate(u32 *addr, u64 offset, int na) +{ + return of_bus_default_translate(addr + 1, offset, na - 1); +} + +static unsigned int of_bus_pci_get_flags(u32 *addr) +{ + unsigned int flags = 0; + u32 w = addr[0]; + + switch((w >> 24) & 0x03) { + case 0x01: + flags |= IORESOURCE_IO; + case 0x02: /* 32 bits */ + case 0x03: /* 64 bits */ + flags |= IORESOURCE_MEM; + } + if (w & 0x40000000) + flags |= IORESOURCE_PREFETCH; + return flags; +} + +/* + * ISA bus specific translator + */ + +static int of_bus_isa_match(struct device_node *np) +{ + return !strcmp(np->name, "isa"); +} + +static void of_bus_isa_count_cells(struct device_node *child, + int *addrc, int *sizec) +{ + if (addrc) + *addrc = 2; + if (sizec) + *sizec = 1; +} + +static u64 of_bus_isa_map(u32 *addr, u32 *range, int na, int ns, int pna) +{ + u64 cp, s, da; + + /* Check address type match */ + if ((addr[0] ^ range[0]) & 0x00000001) + return OF_BAD_ADDR; + + /* Read address values, skipping high cell */ + cp = of_read_addr(range + 1, na - 1); + s = of_read_addr(range + na + pna, ns); + da = of_read_addr(addr + 1, na - 1); + + DBG("OF: ISA map, cp="PRu64", s="PRu64", da="PRu64"\n", cp, s, da); + + if (da < cp || da >= (cp + s)) + return OF_BAD_ADDR; + return da - cp; +} + +static int of_bus_isa_translate(u32 *addr, u64 offset, int na) +{ + return of_bus_default_translate(addr + 1, offset, na - 1); +} + +static unsigned int of_bus_isa_get_flags(u32 *addr) +{ + unsigned int flags = 0; + u32 w = addr[0]; + + if (w & 1) + flags |= IORESOURCE_IO; + else + flags |= IORESOURCE_MEM; + return flags; +} + + +/* + * Array of bus specific translators + */ + +static struct of_bus of_busses[] = { + /* PCI */ + { + .name = "pci", + .addresses = "assigned-addresses", + .match = of_bus_pci_match, + .count_cells = of_bus_pci_count_cells, + .map = of_bus_pci_map, + .translate = of_bus_pci_translate, + .get_flags = of_bus_pci_get_flags, + }, + /* ISA */ + { + .name = "isa", + .addresses = "reg", + .match = of_bus_isa_match, + .count_cells = of_bus_isa_count_cells, + .map = of_bus_isa_map, + .translate = of_bus_isa_translate, + .get_flags = of_bus_isa_get_flags, + }, + /* Default */ + { + .name = "default", + .addresses = "reg", + .match = NULL, + .count_cells = of_bus_default_count_cells, + .map = of_bus_default_map, + .translate = of_bus_default_translate, + .get_flags = of_bus_default_get_flags, + }, +}; + +static struct of_bus *of_match_bus(struct device_node *np) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(of_busses); i ++) + if (!of_busses[i].match || of_busses[i].match(np)) + return &of_busses[i]; + BUG(); + return NULL; +} + +static int of_translate_one(struct device_node *parent, struct of_bus *bus, + struct of_bus *pbus, u32 *addr, + int na, int ns, int pna) +{ + u32 *ranges; + unsigned int rlen; + int rone; + u64 offset = OF_BAD_ADDR; + + /* Normally, an absence of a "ranges" property means we are + * crossing a non-translatable boundary, and thus the addresses + * below the current not cannot be converted to CPU physical ones. + * Unfortunately, while this is very clear in the spec, it's not + * what Apple understood, and they do have things like /uni-n or + * /ht nodes with no "ranges" property and a lot of perfectly + * useable mapped devices below them. Thus we treat the absence of + * "ranges" as equivalent to an empty "ranges" property which means + * a 1:1 translation at that level. It's up to the caller not to try + * to translate addresses that aren't supposed to be translated in + * the first place. --BenH. + */ + ranges = (u32 *)get_property(parent, "ranges", &rlen); + if (ranges == NULL || rlen == 0) { + offset = of_read_addr(addr, na); + memset(addr, 0, pna * 4); + DBG("OF: no ranges, 1:1 translation\n"); + goto finish; + } + + DBG("OF: walking ranges...\n"); + + /* Now walk through the ranges */ + rlen /= 4; + rone = na + pna + ns; + for (; rlen >= rone; rlen -= rone, ranges += rone) { + offset = bus->map(addr, ranges, na, ns, pna); + if (offset != OF_BAD_ADDR) + break; + } + if (offset == OF_BAD_ADDR) { + DBG("OF: not found !\n"); + return 1; + } + memcpy(addr, ranges + na, 4 * pna); + + finish: + of_dump_addr("OF: parent translation for:", addr, pna); + DBG("OF: with offset: "PRu64"\n", offset); + + /* Translate it into parent bus space */ + return pbus->translate(addr, offset, pna); +} + + +/* + * Translate an address from the device-tree into a CPU physical address, + * this walks up the tree and applies the various bus mappings on the + * way. + * + * Note: We consider that crossing any level with #size-cells == 0 to mean + * that translation is impossible (that is we are not dealing with a value + * that can be mapped to a cpu physical address). This is not really specified + * that way, but this is traditionally the way IBM at least do things + */ +u64 of_translate_address(struct device_node *dev, u32 *in_addr) +{ + struct device_node *parent = NULL; + struct of_bus *bus, *pbus; + u32 addr[OF_MAX_ADDR_CELLS]; + int na, ns, pna, pns; + u64 result = OF_BAD_ADDR; + + DBG("OF: ** translation for device %s **\n", dev->full_name); + + /* Increase refcount at current level */ + of_node_get(dev); + + /* Get parent & match bus type */ + parent = of_get_parent(dev); + if (parent == NULL) + goto bail; + bus = of_match_bus(parent); + + /* Cound address cells & copy address locally */ + bus->count_cells(dev, &na, &ns); + if (!OF_CHECK_COUNTS(na, ns)) { + printk(KERN_ERR "prom_parse: Bad cell count for %s\n", + dev->full_name); + goto bail; + } + memcpy(addr, in_addr, na * 4); + + DBG("OF: bus is %s (na=%d, ns=%d) on %s\n", + bus->name, na, ns, parent->full_name); + of_dump_addr("OF: translating address:", addr, na); + + /* Translate */ + for (;;) { + /* Switch to parent bus */ + of_node_put(dev); + dev = parent; + parent = of_get_parent(dev); + + /* If root, we have finished */ + if (parent == NULL) { + DBG("OF: reached root node\n"); + result = of_read_addr(addr, na); + break; + } + + /* Get new parent bus and counts */ + pbus = of_match_bus(parent); + pbus->count_cells(dev, &pna, &pns); + if (!OF_CHECK_COUNTS(pna, pns)) { + printk(KERN_ERR "prom_parse: Bad cell count for %s\n", + dev->full_name); + break; + } + + DBG("OF: parent bus is %s (na=%d, ns=%d) on %s\n", + pbus->name, pna, pns, parent->full_name); + + /* Apply bus translation */ + if (of_translate_one(dev, bus, pbus, addr, na, ns, pna)) + break; + + /* Complete the move up one level */ + na = pna; + ns = pns; + bus = pbus; + + of_dump_addr("OF: one level translation:", addr, na); + } + bail: + of_node_put(parent); + of_node_put(dev); + + return result; +} +EXPORT_SYMBOL(of_translate_address); + +u32 *of_get_address(struct device_node *dev, int index, u64 *size, + unsigned int *flags) +{ + u32 *prop; + unsigned int psize; + struct device_node *parent; + struct of_bus *bus; + int onesize, i, na, ns; + + /* Get parent & match bus type */ + parent = of_get_parent(dev); + if (parent == NULL) + return NULL; + bus = of_match_bus(parent); + bus->count_cells(dev, &na, &ns); + of_node_put(parent); + if (!OF_CHECK_COUNTS(na, ns)) + return NULL; + + /* Get "reg" or "assigned-addresses" property */ + prop = (u32 *)get_property(dev, bus->addresses, &psize); + if (prop == NULL) + return NULL; + psize /= 4; + + onesize = na + ns; + for (i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++) + if (i == index) { + if (size) + *size = of_read_addr(prop + na, ns); + if (flags) + *flags = bus->get_flags(prop); + return prop; + } + return NULL; +} +EXPORT_SYMBOL(of_get_address); + +u32 *of_get_pci_address(struct device_node *dev, int bar_no, u64 *size, + unsigned int *flags) +{ + u32 *prop; + unsigned int psize; + struct device_node *parent; + struct of_bus *bus; + int onesize, i, na, ns; + + /* Get parent & match bus type */ + parent = of_get_parent(dev); + if (parent == NULL) + return NULL; + bus = of_match_bus(parent); + if (strcmp(bus->name, "pci")) + return NULL; + bus->count_cells(dev, &na, &ns); + of_node_put(parent); + if (!OF_CHECK_COUNTS(na, ns)) + return NULL; + + /* Get "reg" or "assigned-addresses" property */ + prop = (u32 *)get_property(dev, bus->addresses, &psize); + if (prop == NULL) + return NULL; + psize /= 4; + + onesize = na + ns; + for (i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++) + if ((prop[0] & 0xff) == ((bar_no * 4) + PCI_BASE_ADDRESS_0)) { + if (size) + *size = of_read_addr(prop + na, ns); + if (flags) + *flags = bus->get_flags(prop); + return prop; + } + return NULL; +} +EXPORT_SYMBOL(of_get_pci_address); + +static int __of_address_to_resource(struct device_node *dev, u32 *addrp, + u64 size, unsigned int flags, + struct resource *r) +{ + u64 taddr; + + if ((flags & (IORESOURCE_IO | IORESOURCE_MEM)) == 0) + return -EINVAL; + taddr = of_translate_address(dev, addrp); + if (taddr == OF_BAD_ADDR) + return -EINVAL; + memset(r, 0, sizeof(struct resource)); + if (flags & IORESOURCE_IO) { + unsigned long port; + port = pci_address_to_pio(taddr); + if (port == (unsigned long)-1) + return -EINVAL; + r->start = port; + r->end = port + size - 1; + } else { + r->start = taddr; + r->end = taddr + size - 1; + } + r->flags = flags; + r->name = dev->name; + return 0; +} + +int of_address_to_resource(struct device_node *dev, int index, + struct resource *r) +{ + u32 *addrp; + u64 size; + unsigned int flags; + + addrp = of_get_address(dev, index, &size, &flags); + if (addrp == NULL) + return -EINVAL; + return __of_address_to_resource(dev, addrp, size, flags, r); +} +EXPORT_SYMBOL_GPL(of_address_to_resource); + +int of_pci_address_to_resource(struct device_node *dev, int bar, + struct resource *r) +{ + u32 *addrp; + u64 size; + unsigned int flags; + + addrp = of_get_pci_address(dev, bar, &size, &flags); + if (addrp == NULL) + return -EINVAL; + return __of_address_to_resource(dev, addrp, size, flags, r); +} +EXPORT_SYMBOL_GPL(of_pci_address_to_resource); diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c index 60dec24..45b8109 100644 --- a/arch/powerpc/kernel/rtas_pci.c +++ b/arch/powerpc/kernel/rtas_pci.c @@ -188,39 +188,19 @@ int is_python(struct device_node *dev) return 0; } -static int get_phb_reg_prop(struct device_node *dev, - unsigned int addr_size_words, - struct reg_property64 *reg) +static void python_countermeasures(struct device_node *dev) { - unsigned int *ui_ptr = NULL, len; - - /* Found a PHB, now figure out where his registers are mapped. */ - ui_ptr = (unsigned int *)get_property(dev, "reg", &len); - if (ui_ptr == NULL) - return 1; - - if (addr_size_words == 1) { - reg->address = ((struct reg_property32 *)ui_ptr)->address; - reg->size = ((struct reg_property32 *)ui_ptr)->size; - } else { - *reg = *((struct reg_property64 *)ui_ptr); - } - - return 0; -} - -static void python_countermeasures(struct device_node *dev, - unsigned int addr_size_words) -{ - struct reg_property64 reg_struct; + struct resource registers; void __iomem *chip_regs; volatile u32 val; - if (get_phb_reg_prop(dev, addr_size_words, ®_struct)) + if (of_address_to_resource(dev, 0, ®isters)) { + printk(KERN_ERR "Can't get address for Python workarounds !\n"); return; + } /* Python's register file is 1 MB in size. */ - chip_regs = ioremap(reg_struct.address & ~(0xfffffUL), 0x100000); + chip_regs = ioremap(registers.start & ~(0xfffffUL), 0x100000); /* * Firmware doesn't always clear this bit which is critical @@ -301,11 +281,10 @@ static int phb_set_bus_ranges(struct device_node *dev, } static int __devinit setup_phb(struct device_node *dev, - struct pci_controller *phb, - unsigned int addr_size_words) + struct pci_controller *phb) { if (is_python(dev)) - python_countermeasures(dev, addr_size_words); + python_countermeasures(dev); if (phb_set_bus_ranges(dev, phb)) return 1; @@ -320,8 +299,8 @@ unsigned long __init find_and_init_phbs(void) { struct device_node *node; struct pci_controller *phb; - unsigned int root_size_cells = 0; unsigned int index; + unsigned int root_size_cells = 0; unsigned int *opprop = NULL; struct device_node *root = of_find_node_by_path("/"); @@ -343,10 +322,11 @@ unsigned long __init find_and_init_phbs(void) phb = pcibios_alloc_controller(node); if (!phb) continue; - setup_phb(node, phb, root_size_cells); + setup_phb(node, phb); pci_process_bridge_OF_ranges(phb, node, 0); pci_setup_phb_io(phb, index == 0); #ifdef CONFIG_PPC_PSERIES + /* XXX This code need serious fixing ... --BenH */ if (ppc64_interrupt_controller == IC_OPEN_PIC && pSeries_mpic) { int addr = root_size_cells * (index + 2) - 1; mpic_assign_isu(pSeries_mpic, index, opprop[addr]); @@ -381,22 +361,17 @@ unsigned long __init find_and_init_phbs(void) struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn) { - struct device_node *root = of_find_node_by_path("/"); - unsigned int root_size_cells = 0; struct pci_controller *phb; int primary; - root_size_cells = prom_n_size_cells(root); - primary = list_empty(&hose_list); phb = pcibios_alloc_controller(dn); if (!phb) return NULL; - setup_phb(dn, phb, root_size_cells); + setup_phb(dn, phb); pci_process_bridge_OF_ranges(phb, dn, primary); pci_setup_phb_io_dynamic(phb, primary); - of_node_put(root); pci_devs_phb_init_dynamic(phb); scan_phb(phb); diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index bd3eb42..d5c52fa 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -93,8 +93,8 @@ EXPORT_SYMBOL(ppc_do_canonicalize_irqs); /* also used by kexec */ void machine_shutdown(void) { - if (ppc_md.nvram_sync) - ppc_md.nvram_sync(); + if (ppc_md.machine_shutdown) + ppc_md.machine_shutdown(); } void machine_restart(char *cmd) @@ -294,129 +294,6 @@ struct seq_operations cpuinfo_op = { .show = show_cpuinfo, }; -#ifdef CONFIG_PPC_MULTIPLATFORM -static int __init set_preferred_console(void) -{ - struct device_node *prom_stdout = NULL; - char *name; - u32 *spd; - int offset = 0; - - DBG(" -> set_preferred_console()\n"); - - /* The user has requested a console so this is already set up. */ - if (strstr(saved_command_line, "console=")) { - DBG(" console was specified !\n"); - return -EBUSY; - } - - if (!of_chosen) { - DBG(" of_chosen is NULL !\n"); - return -ENODEV; - } - /* We are getting a weird phandle from OF ... */ - /* ... So use the full path instead */ - name = (char *)get_property(of_chosen, "linux,stdout-path", NULL); - if (name == NULL) { - DBG(" no linux,stdout-path !\n"); - return -ENODEV; - } - prom_stdout = of_find_node_by_path(name); - if (!prom_stdout) { - DBG(" can't find stdout package %s !\n", name); - return -ENODEV; - } - DBG("stdout is %s\n", prom_stdout->full_name); - - name = (char *)get_property(prom_stdout, "name", NULL); - if (!name) { - DBG(" stdout package has no name !\n"); - goto not_found; - } - spd = (u32 *)get_property(prom_stdout, "current-speed", NULL); - - if (0) - ; -#ifdef CONFIG_SERIAL_8250_CONSOLE - else if (strcmp(name, "serial") == 0) { - int i; - u32 *reg = (u32 *)get_property(prom_stdout, "reg", &i); - if (i > 8) { - switch (reg[1]) { - case 0x3f8: - offset = 0; - break; - case 0x2f8: - offset = 1; - break; - case 0x898: - offset = 2; - break; - case 0x890: - offset = 3; - break; - default: - /* We dont recognise the serial port */ - goto not_found; - } - } - } -#endif /* CONFIG_SERIAL_8250_CONSOLE */ -#ifdef CONFIG_PPC_PSERIES - else if (strcmp(name, "vty") == 0) { - u32 *reg = (u32 *)get_property(prom_stdout, "reg", NULL); - char *compat = (char *)get_property(prom_stdout, "compatible", NULL); - - if (reg && compat && (strcmp(compat, "hvterm-protocol") == 0)) { - /* Host Virtual Serial Interface */ - switch (reg[0]) { - case 0x30000000: - offset = 0; - break; - case 0x30000001: - offset = 1; - break; - default: - goto not_found; - } - of_node_put(prom_stdout); - DBG("Found hvsi console at offset %d\n", offset); - return add_preferred_console("hvsi", offset, NULL); - } else { - /* pSeries LPAR virtual console */ - of_node_put(prom_stdout); - DBG("Found hvc console\n"); - return add_preferred_console("hvc", 0, NULL); - } - } -#endif /* CONFIG_PPC_PSERIES */ -#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE - else if (strcmp(name, "ch-a") == 0) - offset = 0; - else if (strcmp(name, "ch-b") == 0) - offset = 1; -#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */ - else - goto not_found; - of_node_put(prom_stdout); - - DBG("Found serial console at ttyS%d\n", offset); - - if (spd) { - static char __initdata opt[16]; - sprintf(opt, "%d", *spd); - return add_preferred_console("ttyS", offset, opt); - } else - return add_preferred_console("ttyS", offset, NULL); - - not_found: - DBG("No preferred console found !\n"); - of_node_put(prom_stdout); - return -ENODEV; -} -console_initcall(set_preferred_console); -#endif /* CONFIG_PPC_MULTIPLATFORM */ - void __init check_for_initrd(void) { #ifdef CONFIG_BLK_DEV_INITRD @@ -442,7 +319,7 @@ void __init check_for_initrd(void) /* If we were passed an initrd, set the ROOT_DEV properly if the values * look sensible. If not, clear initrd reference. */ - if (initrd_start >= KERNELBASE && initrd_end >= KERNELBASE && + if (is_kernel_addr(initrd_start) && is_kernel_addr(initrd_end) && initrd_end > initrd_start) ROOT_DEV = Root_RAM0; else diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index e569433..e5d285a 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -39,6 +39,8 @@ #include <asm/nvram.h> #include <asm/xmon.h> #include <asm/time.h> +#include <asm/serial.h> +#include <asm/udbg.h> #include "setup.h" @@ -172,12 +174,23 @@ void __init platform_init(void) */ void __init machine_init(unsigned long dt_ptr, unsigned long phys) { + /* If btext is enabled, we might have a BAT setup for early display, + * thus we do enable some very basic udbg output + */ +#ifdef CONFIG_BOOTX_TEXT + udbg_putc = btext_drawchar; +#endif + + /* Do some early initialization based on the flat device tree */ early_init_devtree(__va(dt_ptr)); + /* Check default command line */ #ifdef CONFIG_CMDLINE - strlcpy(cmd_line, CONFIG_CMDLINE, sizeof(cmd_line)); + if (cmd_line[0] == 0) + strlcpy(cmd_line, CONFIG_CMDLINE, sizeof(cmd_line)); #endif /* CONFIG_CMDLINE */ + /* Base init based on machine type */ platform_init(); #ifdef CONFIG_6xx @@ -282,25 +295,22 @@ void __init setup_arch(char **cmdline_p) unflatten_device_tree(); check_for_initrd(); - finish_device_tree(); - smp_setup_cpu_maps(); + if (ppc_md.init_early) + ppc_md.init_early(); -#ifdef CONFIG_BOOTX_TEXT - init_boot_display(); +#ifdef CONFIG_SERIAL_8250 + find_legacy_serial_ports(); #endif + finish_device_tree(); -#ifdef CONFIG_PPC_PMAC - /* This could be called "early setup arch", it must be done - * now because xmon need it - */ - if (_machine == _MACH_Pmac) - pmac_feature_init(); /* New cool way */ -#endif + smp_setup_cpu_maps(); #ifdef CONFIG_XMON_DEFAULT xmon_init(1); #endif + /* Register early console */ + register_early_udbg_console(); #if defined(CONFIG_KGDB) if (ppc_md.kgdb_map_scc) diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index e3fb783..98e9f05 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -34,6 +34,7 @@ #include <linux/serial.h> #include <linux/serial_8250.h> #include <asm/io.h> +#include <asm/kdump.h> #include <asm/prom.h> #include <asm/processor.h> #include <asm/pgtable.h> @@ -268,6 +269,10 @@ void __init early_setup(unsigned long dt_ptr) } ppc_md = **mach; +#ifdef CONFIG_CRASH_DUMP + kdump_setup(); +#endif + DBG("Found, Initializing memory management...\n"); /* @@ -317,6 +322,7 @@ void early_setup_secondary(void) void smp_release_cpus(void) { extern unsigned long __secondary_hold_spinloop; + unsigned long *ptr; DBG(" -> smp_release_cpus()\n"); @@ -327,7 +333,9 @@ void smp_release_cpus(void) * This is useless but harmless on iSeries, secondaries are already * waiting on their paca spinloops. */ - __secondary_hold_spinloop = 1; + ptr = (unsigned long *)((unsigned long)&__secondary_hold_spinloop + - PHYSICAL_START); + *ptr = 1; mb(); DBG(" <- smp_release_cpus()\n"); @@ -459,16 +467,21 @@ void __init setup_system(void) */ ppc_md.init_early(); + /* + * We can discover serial ports now since the above did setup the + * hash table management for us, thus ioremap works. We do that early + * so that further code can be debugged + */ +#ifdef CONFIG_SERIAL_8250 + find_legacy_serial_ports(); +#endif + /* * "Finish" the device-tree, that is do the actual parsing of * some of the properties like the interrupt map */ finish_device_tree(); -#ifdef CONFIG_BOOTX_TEXT - init_boot_display(); -#endif - /* * Initialize xmon */ @@ -507,6 +520,9 @@ void __init setup_system(void) ppc64_caches.iline_size); printk("htab_address = 0x%p\n", htab_address); printk("htab_hash_mask = 0x%lx\n", htab_hash_mask); +#if PHYSICAL_START > 0 + printk("physical_start = 0x%x\n", PHYSICAL_START); +#endif printk("-----------------------------------------------------\n"); mm_init_ppc64(); @@ -657,187 +673,6 @@ void ppc64_terminate_msg(unsigned int src, const char *msg) printk("[terminate]%04x %s\n", src, msg); } -#ifndef CONFIG_PPC_ISERIES -/* - * This function can be used by platforms to "find" legacy serial ports. - * It works for "serial" nodes under an "isa" node, and will try to - * respect the "ibm,aix-loc" property if any. It works with up to 8 - * ports. - */ - -#define MAX_LEGACY_SERIAL_PORTS 8 -static struct plat_serial8250_port serial_ports[MAX_LEGACY_SERIAL_PORTS+1]; -static unsigned int old_serial_count; - -void __init generic_find_legacy_serial_ports(u64 *physport, - unsigned int *default_speed) -{ - struct device_node *np; - u32 *sizeprop; - - struct isa_reg_property { - u32 space; - u32 address; - u32 size; - }; - struct pci_reg_property { - struct pci_address addr; - u32 size_hi; - u32 size_lo; - }; - - DBG(" -> generic_find_legacy_serial_port()\n"); - - *physport = 0; - if (default_speed) - *default_speed = 0; - - np = of_find_node_by_path("/"); - if (!np) - return; - - /* First fill our array */ - for (np = NULL; (np = of_find_node_by_type(np, "serial"));) { - struct device_node *isa, *pci; - struct isa_reg_property *reg; - unsigned long phys_size, addr_size, io_base; - u32 *rangesp; - u32 *interrupts, *clk, *spd; - char *typep; - int index, rlen, rentsize; - - /* Ok, first check if it's under an "isa" parent */ - isa = of_get_parent(np); - if (!isa || strcmp(isa->name, "isa")) { - DBG("%s: no isa parent found\n", np->full_name); - continue; - } - - /* Now look for an "ibm,aix-loc" property that gives us ordering - * if any... - */ - typep = (char *)get_property(np, "ibm,aix-loc", NULL); - - /* Get the ISA port number */ - reg = (struct isa_reg_property *)get_property(np, "reg", NULL); - if (reg == NULL) - goto next_port; - /* We assume the interrupt number isn't translated ... */ - interrupts = (u32 *)get_property(np, "interrupts", NULL); - /* get clock freq. if present */ - clk = (u32 *)get_property(np, "clock-frequency", NULL); - /* get default speed if present */ - spd = (u32 *)get_property(np, "current-speed", NULL); - /* Default to locate at end of array */ - index = old_serial_count; /* end of the array by default */ - - /* If we have a location index, then use it */ - if (typep && *typep == 'S') { - index = simple_strtol(typep+1, NULL, 0) - 1; - /* if index is out of range, use end of array instead */ - if (index >= MAX_LEGACY_SERIAL_PORTS) - index = old_serial_count; - /* if our index is still out of range, that mean that - * array is full, we could scan for a free slot but that - * make little sense to bother, just skip the port - */ - if (index >= MAX_LEGACY_SERIAL_PORTS) - goto next_port; - if (index >= old_serial_count) - old_serial_count = index + 1; - /* Check if there is a port who already claimed our slot */ - if (serial_ports[index].iobase != 0) { - /* if we still have some room, move it, else override */ - if (old_serial_count < MAX_LEGACY_SERIAL_PORTS) { - DBG("Moved legacy port %d -> %d\n", index, - old_serial_count); - serial_ports[old_serial_count++] = - serial_ports[index]; - } else { - DBG("Replacing legacy port %d\n", index); - } - } - } - if (index >= MAX_LEGACY_SERIAL_PORTS) - goto next_port; - if (index >= old_serial_count) - old_serial_count = index + 1; - - /* Now fill the entry */ - memset(&serial_ports[index], 0, sizeof(struct plat_serial8250_port)); - serial_ports[index].uartclk = clk ? *clk : BASE_BAUD * 16; - serial_ports[index].iobase = reg->address; - serial_ports[index].irq = interrupts ? interrupts[0] : 0; - serial_ports[index].flags = ASYNC_BOOT_AUTOCONF; - - DBG("Added legacy port, index: %d, port: %x, irq: %d, clk: %d\n", - index, - serial_ports[index].iobase, - serial_ports[index].irq, - serial_ports[index].uartclk); - - /* Get phys address of IO reg for port 1 */ - if (index != 0) - goto next_port; - - pci = of_get_parent(isa); - if (!pci) { - DBG("%s: no pci parent found\n", np->full_name); - goto next_port; - } - - rangesp = (u32 *)get_property(pci, "ranges", &rlen); - if (rangesp == NULL) { - of_node_put(pci); - goto next_port; - } - rlen /= 4; - - /* we need the #size-cells of the PCI bridge node itself */ - phys_size = 1; - sizeprop = (u32 *)get_property(pci, "#size-cells", NULL); - if (sizeprop != NULL) - phys_size = *sizeprop; - /* we need the parent #addr-cells */ - addr_size = prom_n_addr_cells(pci); - rentsize = 3 + addr_size + phys_size; - io_base = 0; - for (;rlen >= rentsize; rlen -= rentsize,rangesp += rentsize) { - if (((rangesp[0] >> 24) & 0x3) != 1) - continue; /* not IO space */ - io_base = rangesp[3]; - if (addr_size == 2) - io_base = (io_base << 32) | rangesp[4]; - } - if (io_base != 0) { - *physport = io_base + reg->address; - if (default_speed && spd) - *default_speed = *spd; - } - of_node_put(pci); - next_port: - of_node_put(isa); - } - - DBG(" <- generic_find_legacy_serial_port()\n"); -} - -static struct platform_device serial_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = serial_ports, - }, -}; - -static int __init serial_dev_init(void) -{ - return platform_device_register(&serial_device); -} -arch_initcall(serial_dev_init); - -#endif /* CONFIG_PPC_ISERIES */ - int check_legacy_ioport(unsigned long base_port) { if (ppc_md.check_legacy_ioport == NULL) diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index 5a2eba6..d3f0b6d 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -76,7 +76,6 @@ * registers from *regs. This is what we need * to do when a signal has been delivered. */ -#define sigreturn_exit(regs) return 0 #define GP_REGS_SIZE min(sizeof(elf_gregset_t32), sizeof(struct pt_regs32)) #undef __SIGNAL_FRAMESIZE @@ -156,9 +155,17 @@ static inline int save_general_regs(struct pt_regs *regs, elf_greg_t64 *gregs = (elf_greg_t64 *)regs; int i; - for (i = 0; i <= PT_RESULT; i ++) + if (!FULL_REGS(regs)) { + set_thread_flag(TIF_SAVE_NVGPRS); + current_thread_info()->nvgprs_frame = frame->mc_gregs; + } + + for (i = 0; i <= PT_RESULT; i ++) { + if (i == 14 && !FULL_REGS(regs)) + i = 32; if (__put_user((unsigned int)gregs[i], &frame->mc_gregs[i])) return -EFAULT; + } return 0; } @@ -179,8 +186,6 @@ static inline int restore_general_regs(struct pt_regs *regs, #else /* CONFIG_PPC64 */ -extern void sigreturn_exit(struct pt_regs *); - #define GP_REGS_SIZE min(sizeof(elf_gregset_t), sizeof(struct pt_regs)) static inline int put_sigset_t(sigset_t __user *uset, sigset_t *set) @@ -214,6 +219,15 @@ static inline int get_old_sigaction(struct k_sigaction *new_ka, static inline int save_general_regs(struct pt_regs *regs, struct mcontext __user *frame) { + if (!FULL_REGS(regs)) { + /* Zero out the unsaved GPRs to avoid information + leak, and set TIF_SAVE_NVGPRS to ensure that the + registers do actually get saved later. */ + memset(®s->gpr[14], 0, 18 * sizeof(unsigned long)); + current_thread_info()->nvgprs_frame = &frame->mc_gregs; + set_thread_flag(TIF_SAVE_NVGPRS); + } + return __copy_to_user(&frame->mc_gregs, regs, GP_REGS_SIZE); } @@ -256,8 +270,10 @@ long sys_sigsuspend(old_sigset_t mask, int p2, int p3, int p4, int p6, int p7, while (1) { current->state = TASK_INTERRUPTIBLE; schedule(); - if (do_signal(&saveset, regs)) - sigreturn_exit(regs); + if (do_signal(&saveset, regs)) { + set_thread_flag(TIF_RESTOREALL); + return 0; + } } } @@ -292,8 +308,10 @@ long sys_rt_sigsuspend( while (1) { current->state = TASK_INTERRUPTIBLE; schedule(); - if (do_signal(&saveset, regs)) - sigreturn_exit(regs); + if (do_signal(&saveset, regs)) { + set_thread_flag(TIF_RESTOREALL); + return 0; + } } } @@ -391,9 +409,6 @@ struct rt_sigframe { static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame, int sigret) { -#ifdef CONFIG_PPC32 - CHECK_FULL_REGS(regs); -#endif /* Make sure floating point registers are stored in regs */ flush_fp_to_thread(current); @@ -828,12 +843,6 @@ static int handle_rt_signal(unsigned long sig, struct k_sigaction *ka, regs->gpr[6] = (unsigned long) rt_sf; regs->nip = (unsigned long) ka->sa.sa_handler; regs->trap = 0; -#ifdef CONFIG_PPC64 - regs->result = 0; - - if (test_thread_flag(TIF_SINGLESTEP)) - ptrace_notify(SIGTRAP); -#endif return 1; badframe: @@ -911,8 +920,8 @@ long sys_swapcontext(struct ucontext __user *old_ctx, */ if (do_setcontext(new_ctx, regs, 0)) do_exit(SIGSEGV); - sigreturn_exit(regs); - /* doesn't actually return back to here */ + + set_thread_flag(TIF_RESTOREALL); return 0; } @@ -945,12 +954,11 @@ long sys_rt_sigreturn(int r3, int r4, int r5, int r6, int r7, int r8, * nobody does any... */ compat_sys_sigaltstack((u32)(u64)&rt_sf->uc.uc_stack, 0, 0, 0, 0, 0, regs); - return (int)regs->result; #else do_sigaltstack(&rt_sf->uc.uc_stack, NULL, regs->gpr[1]); - sigreturn_exit(regs); /* doesn't return here */ - return 0; #endif + set_thread_flag(TIF_RESTOREALL); + return 0; bad: force_sig(SIGSEGV, current); @@ -1041,9 +1049,7 @@ int sys_debug_setcontext(struct ucontext __user *ctx, */ do_sigaltstack(&ctx->uc_stack, NULL, regs->gpr[1]); - sigreturn_exit(regs); - /* doesn't actually return back to here */ - + set_thread_flag(TIF_RESTOREALL); out: return 0; } @@ -1107,12 +1113,6 @@ static int handle_signal(unsigned long sig, struct k_sigaction *ka, regs->gpr[4] = (unsigned long) sc; regs->nip = (unsigned long) ka->sa.sa_handler; regs->trap = 0; -#ifdef CONFIG_PPC64 - regs->result = 0; - - if (test_thread_flag(TIF_SINGLESTEP)) - ptrace_notify(SIGTRAP); -#endif return 1; @@ -1160,12 +1160,8 @@ long sys_sigreturn(int r3, int r4, int r5, int r6, int r7, int r8, || restore_user_regs(regs, sr, 1)) goto badframe; -#ifdef CONFIG_PPC64 - return (int)regs->result; -#else - sigreturn_exit(regs); /* doesn't return */ + set_thread_flag(TIF_RESTOREALL); return 0; -#endif badframe: force_sig(SIGSEGV, current); diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c index 1decf27..5462bef 100644 --- a/arch/powerpc/kernel/signal_64.c +++ b/arch/powerpc/kernel/signal_64.c @@ -96,8 +96,10 @@ long sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize, int p3, int while (1) { current->state = TASK_INTERRUPTIBLE; schedule(); - if (do_signal(&saveset, regs)) + if (do_signal(&saveset, regs)) { + set_thread_flag(TIF_RESTOREALL); return 0; + } } } @@ -152,6 +154,14 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, err |= __put_user(0, &sc->v_regs); #endif /* CONFIG_ALTIVEC */ err |= __put_user(&sc->gp_regs, &sc->regs); + if (!FULL_REGS(regs)) { + /* Zero out the unsaved GPRs to avoid information + leak, and set TIF_SAVE_NVGPRS to ensure that the + registers do actually get saved later. */ + memset(®s->gpr[14], 0, 18 * sizeof(unsigned long)); + set_thread_flag(TIF_SAVE_NVGPRS); + current_thread_info()->nvgprs_frame = &sc->gp_regs; + } err |= __copy_to_user(&sc->gp_regs, regs, GP_REGS_SIZE); err |= __copy_to_user(&sc->fp_regs, ¤t->thread.fpr, FP_REGS_SIZE); err |= __put_user(signr, &sc->signal); @@ -340,6 +350,7 @@ int sys_swapcontext(struct ucontext __user *old_ctx, do_exit(SIGSEGV); /* This returns like rt_sigreturn */ + set_thread_flag(TIF_RESTOREALL); return 0; } @@ -372,7 +383,8 @@ int sys_rt_sigreturn(unsigned long r3, unsigned long r4, unsigned long r5, */ do_sigaltstack(&uc->uc_stack, NULL, regs->gpr[1]); - return regs->result; + set_thread_flag(TIF_RESTOREALL); + return 0; badframe: #if DEBUG_SIG @@ -454,9 +466,6 @@ static int setup_rt_frame(int signr, struct k_sigaction *ka, siginfo_t *info, if (err) goto badframe; - if (test_thread_flag(TIF_SINGLESTEP)) - ptrace_notify(SIGTRAP); - return 1; badframe: @@ -502,6 +511,8 @@ static inline void syscall_restart(struct pt_regs *regs, struct k_sigaction *ka) * we only get here if there is a handler, we dont restart. */ regs->result = -EINTR; + regs->gpr[3] = EINTR; + regs->ccr |= 0x10000000; break; case -ERESTARTSYS: /* ERESTARTSYS means to restart the syscall if there is no @@ -509,6 +520,8 @@ static inline void syscall_restart(struct pt_regs *regs, struct k_sigaction *ka) */ if (!(ka->sa.sa_flags & SA_RESTART)) { regs->result = -EINTR; + regs->gpr[3] = EINTR; + regs->ccr |= 0x10000000; break; } /* fallthrough */ diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 30374d2..d381ec9 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -31,6 +31,7 @@ #include <linux/sysdev.h> #include <linux/cpu.h> #include <linux/notifier.h> +#include <linux/topology.h> #include <asm/ptrace.h> #include <asm/atomic.h> @@ -75,6 +76,8 @@ void smp_call_function_interrupt(void); int smt_enabled_at_boot = 1; +static void (*crash_ipi_function_ptr)(struct pt_regs *) = NULL; + #ifdef CONFIG_MPIC int __init smp_mpic_probe(void) { @@ -123,11 +126,16 @@ void smp_message_recv(int msg, struct pt_regs *regs) /* XXX Do we have to do this? */ set_need_resched(); break; -#ifdef CONFIG_DEBUGGER case PPC_MSG_DEBUGGER_BREAK: + if (crash_ipi_function_ptr) { + crash_ipi_function_ptr(regs); + break; + } +#ifdef CONFIG_DEBUGGER debugger_ipi(regs); break; -#endif +#endif /* CONFIG_DEBUGGER */ + /* FALLTHROUGH */ default: printk("SMP %d: smp_message_recv(): unknown msg %d\n", smp_processor_id(), msg); @@ -147,6 +155,17 @@ void smp_send_debugger_break(int cpu) } #endif +#ifdef CONFIG_KEXEC +void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *)) +{ + crash_ipi_function_ptr = crash_ipi_callback; + if (crash_ipi_callback) { + mb(); + smp_ops->message_pass(MSG_ALL_BUT_SELF, PPC_MSG_DEBUGGER_BREAK); + } +} +#endif + static void stop_this_cpu(void *dummy) { local_irq_disable(); @@ -452,10 +471,6 @@ int __devinit __cpu_up(unsigned int cpu) if (smp_ops->cpu_bootable && !smp_ops->cpu_bootable(cpu)) return -EINVAL; -#ifdef CONFIG_PPC64 - paca[cpu].default_decr = tb_ticks_per_jiffy; -#endif - /* Make sure callin-map entry is 0 (can be leftover a CPU * hotplug */ @@ -554,6 +569,8 @@ void __init smp_cpus_done(unsigned int max_cpus) smp_ops->setup_cpu(boot_cpuid); set_cpus_allowed(current, old_mask); + + dump_numa_cpu_topology(); } #ifdef CONFIG_HOTPLUG_CPU diff --git a/arch/powerpc/kernel/syscalls.c b/arch/powerpc/kernel/syscalls.c index 91b93d9..ad895c9 100644 --- a/arch/powerpc/kernel/syscalls.c +++ b/arch/powerpc/kernel/syscalls.c @@ -43,9 +43,6 @@ #include <asm/time.h> #include <asm/unistd.h> -extern unsigned long wall_jiffies; - - /* * sys_ipc() is the de-multiplexer for the SysV IPC calls.. * @@ -311,31 +308,6 @@ int sys_olduname(struct oldold_utsname __user *name) return error? -EFAULT: 0; } -#ifdef CONFIG_PPC64 -time_t sys64_time(time_t __user * tloc) -{ - time_t secs; - time_t usecs; - - long tb_delta = tb_ticks_since(tb_last_stamp); - tb_delta += (jiffies - wall_jiffies) * tb_ticks_per_jiffy; - - secs = xtime.tv_sec; - usecs = (xtime.tv_nsec/1000) + tb_delta / tb_ticks_per_usec; - while (usecs >= USEC_PER_SEC) { - ++secs; - usecs -= USEC_PER_SEC; - } - - if (tloc) { - if (put_user(secs,tloc)) - secs = -EFAULT; - } - - return secs; -} -#endif - long ppc_fadvise64_64(int fd, int advice, u32 offset_high, u32 offset_low, u32 len_high, u32 len_low) { diff --git a/arch/powerpc/kernel/systbl.S b/arch/powerpc/kernel/systbl.S index 65eaea9..65463a1 100644 --- a/arch/powerpc/kernel/systbl.S +++ b/arch/powerpc/kernel/systbl.S @@ -54,7 +54,7 @@ SYSCALL(link) SYSCALL(unlink) COMPAT_SYS(execve) SYSCALL(chdir) -SYSX(sys64_time,compat_sys_time,sys_time) +COMPAT_SYS(time) SYSCALL(mknod) SYSCALL(chmod) SYSCALL(lchown) @@ -113,7 +113,7 @@ SYSCALL(sgetmask) COMPAT_SYS(ssetmask) SYSCALL(setreuid) SYSCALL(setregid) -SYSX(sys_ni_syscall,ppc32_sigsuspend,ppc_sigsuspend) +SYS32ONLY(sigsuspend) COMPAT_SYS(sigpending) COMPAT_SYS(sethostname) COMPAT_SYS(setrlimit) @@ -160,7 +160,7 @@ SYSCALL(swapoff) COMPAT_SYS(sysinfo) COMPAT_SYS(ipc) SYSCALL(fsync) -SYSX(sys_ni_syscall,ppc32_sigreturn,sys_sigreturn) +SYS32ONLY(sigreturn) PPC_SYS(clone) COMPAT_SYS(setdomainname) PPC_SYS(newuname) @@ -213,13 +213,13 @@ COMPAT_SYS(nfsservctl) SYSCALL(setresgid) SYSCALL(getresgid) COMPAT_SYS(prctl) -SYSX(ppc64_rt_sigreturn,ppc32_rt_sigreturn,sys_rt_sigreturn) +COMPAT_SYS(rt_sigreturn) COMPAT_SYS(rt_sigaction) COMPAT_SYS(rt_sigprocmask) COMPAT_SYS(rt_sigpending) COMPAT_SYS(rt_sigtimedwait) COMPAT_SYS(rt_sigqueueinfo) -SYSX(ppc64_rt_sigsuspend,ppc32_rt_sigsuspend,ppc_rt_sigsuspend) +COMPAT_SYS(rt_sigsuspend) COMPAT_SYS(pread64) COMPAT_SYS(pwrite64) SYSCALL(chown) @@ -290,7 +290,7 @@ COMPAT_SYS(clock_settime) COMPAT_SYS(clock_gettime) COMPAT_SYS(clock_getres) COMPAT_SYS(clock_nanosleep) -SYSX(ppc64_swapcontext,ppc32_swapcontext,ppc_swapcontext) +COMPAT_SYS(swapcontext) COMPAT_SYS(tgkill) COMPAT_SYS(utimes) COMPAT_SYS(statfs64) @@ -319,3 +319,5 @@ COMPAT_SYS(ioprio_get) SYSCALL(inotify_init) SYSCALL(inotify_add_watch) SYSCALL(inotify_rm_watch) +SYSCALL(spu_run) +SYSCALL(spu_create) diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index de84797..56f50e9 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -699,10 +699,6 @@ void __init time_init(void) div128_by_32(1024*1024, 0, tb_ticks_per_sec, &res); tb_to_xs = res.result_low; -#ifdef CONFIG_PPC64 - get_paca()->default_decr = tb_ticks_per_jiffy; -#endif - /* * Compute scale factor for sched_clock. * The calibrate_decr() function has set tb_ticks_per_sec, diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 1511454..7509aa6 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -31,6 +31,7 @@ #include <linux/prctl.h> #include <linux/delay.h> #include <linux/kprobes.h> +#include <linux/kexec.h> #include <asm/kdebug.h> #include <asm/pgtable.h> @@ -95,7 +96,7 @@ static DEFINE_SPINLOCK(die_lock); int die(const char *str, struct pt_regs *regs, long err) { - static int die_counter; + static int die_counter, crash_dump_start = 0; int nl = 0; if (debugger(regs)) @@ -156,7 +157,21 @@ int die(const char *str, struct pt_regs *regs, long err) print_modules(); show_regs(regs); bust_spinlocks(0); + + if (!crash_dump_start && kexec_should_crash(current)) { + crash_dump_start = 1; + spin_unlock_irq(&die_lock); + crash_kexec(regs); + /* NOTREACHED */ + } spin_unlock_irq(&die_lock); + if (crash_dump_start) + /* + * Only for soft-reset: Other CPUs will be responded to an IPI + * sent by first kexec CPU. + */ + for(;;) + ; if (in_interrupt()) panic("Fatal exception in interrupt"); @@ -215,8 +230,10 @@ void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr) void system_reset_exception(struct pt_regs *regs) { /* See if any machine dependent calls */ - if (ppc_md.system_reset_exception) - ppc_md.system_reset_exception(regs); + if (ppc_md.system_reset_exception) { + if (ppc_md.system_reset_exception(regs)) + return; + } die("System Reset", regs, SIGABRT); @@ -886,12 +903,10 @@ void altivec_unavailable_exception(struct pt_regs *regs) die("Unrecoverable VMX/Altivec Unavailable Exception", regs, SIGABRT); } -#if defined(CONFIG_PPC64) || defined(CONFIG_E500) void performance_monitor_exception(struct pt_regs *regs) { perf_irq(regs); } -#endif #ifdef CONFIG_8xx void SoftwareEmulation(struct pt_regs *regs) diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c index 0d878e7..558c1ce 100644 --- a/arch/powerpc/kernel/udbg.c +++ b/arch/powerpc/kernel/udbg.c @@ -16,8 +16,8 @@ #include <linux/console.h> #include <asm/processor.h> -void (*udbg_putc)(unsigned char c); -unsigned char (*udbg_getc)(void); +void (*udbg_putc)(char c); +int (*udbg_getc)(void); int (*udbg_getc_poll)(void); /* udbg library, used by xmon et al */ @@ -57,8 +57,8 @@ int udbg_write(const char *s, int n) int udbg_read(char *buf, int buflen) { - char c, *p = buf; - int i; + char *p = buf; + int i, c; if (!udbg_getc) return 0; @@ -66,8 +66,11 @@ int udbg_read(char *buf, int buflen) for (i = 0; i < buflen; ++i) { do { c = udbg_getc(); + if (c == -1 && i == 0) + return -1; + } while (c == 0x11 || c == 0x13); - if (c == 0) + if (c == 0 || c == -1) break; *p++ = c; } @@ -78,7 +81,7 @@ int udbg_read(char *buf, int buflen) #define UDBG_BUFSIZE 256 void udbg_printf(const char *fmt, ...) { - unsigned char buf[UDBG_BUFSIZE]; + char buf[UDBG_BUFSIZE]; va_list args; va_start(args, fmt); @@ -87,6 +90,12 @@ void udbg_printf(const char *fmt, ...) va_end(args); } +void __init udbg_progress(char *s, unsigned short hex) +{ + udbg_puts(s); + udbg_puts("\n"); +} + /* * Early boot console based on udbg */ @@ -99,7 +108,7 @@ static void udbg_console_write(struct console *con, const char *s, static struct console udbg_console = { .name = "udbg", .write = udbg_console_write, - .flags = CON_PRINTBUFFER, + .flags = CON_PRINTBUFFER | CON_ENABLED, .index = -1, }; @@ -107,15 +116,19 @@ static int early_console_initialized; void __init disable_early_printk(void) { +#if 1 if (!early_console_initialized) return; unregister_console(&udbg_console); early_console_initialized = 0; +#endif } /* called by setup_system */ void register_early_udbg_console(void) { + if (early_console_initialized) + return; early_console_initialized = 1; register_console(&udbg_console); } diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c index 9313574..7541bf4 100644 --- a/arch/powerpc/kernel/udbg_16550.c +++ b/arch/powerpc/kernel/udbg_16550.c @@ -43,9 +43,11 @@ struct NS16550 { #define LSR_TEMT 0x40 /* Xmitter empty */ #define LSR_ERR 0x80 /* Error */ +#define LCR_DLAB 0x80 + static volatile struct NS16550 __iomem *udbg_comport; -static void udbg_550_putc(unsigned char c) +static void udbg_550_putc(char c) { if (udbg_comport) { while ((in_8(&udbg_comport->lsr) & LSR_THRE) == 0) @@ -67,39 +69,80 @@ static int udbg_550_getc_poll(void) return -1; } -static unsigned char udbg_550_getc(void) +static int udbg_550_getc(void) { if (udbg_comport) { while ((in_8(&udbg_comport->lsr) & LSR_DR) == 0) /* wait for char */; return in_8(&udbg_comport->rbr); } - return 0; + return -1; } -void udbg_init_uart(void __iomem *comport, unsigned int speed) +void udbg_init_uart(void __iomem *comport, unsigned int speed, + unsigned int clock) { - u16 dll = speed ? (115200 / speed) : 12; + unsigned int dll, base_bauds = clock / 16; + + if (speed == 0) + speed = 9600; + dll = base_bauds / speed; if (comport) { udbg_comport = (struct NS16550 __iomem *)comport; out_8(&udbg_comport->lcr, 0x00); out_8(&udbg_comport->ier, 0xff); out_8(&udbg_comport->ier, 0x00); - out_8(&udbg_comport->lcr, 0x80); /* Access baud rate */ - out_8(&udbg_comport->dll, dll & 0xff); /* 1 = 115200, 2 = 57600, - 3 = 38400, 12 = 9600 baud */ - out_8(&udbg_comport->dlm, dll >> 8); /* dll >> 8 which should be zero - for fast rates; */ - out_8(&udbg_comport->lcr, 0x03); /* 8 data, 1 stop, no parity */ - out_8(&udbg_comport->mcr, 0x03); /* RTS/DTR */ - out_8(&udbg_comport->fcr ,0x07); /* Clear & enable FIFOs */ + out_8(&udbg_comport->lcr, LCR_DLAB); + out_8(&udbg_comport->dll, dll & 0xff); + out_8(&udbg_comport->dlm, dll >> 8); + /* 8 data, 1 stop, no parity */ + out_8(&udbg_comport->lcr, 0x03); + /* RTS/DTR */ + out_8(&udbg_comport->mcr, 0x03); + /* Clear & enable FIFOs */ + out_8(&udbg_comport->fcr ,0x07); udbg_putc = udbg_550_putc; udbg_getc = udbg_550_getc; udbg_getc_poll = udbg_550_getc_poll; } } +unsigned int udbg_probe_uart_speed(void __iomem *comport, unsigned int clock) +{ + unsigned int dll, dlm, divisor, prescaler, speed; + u8 old_lcr; + volatile struct NS16550 __iomem *port = comport; + + old_lcr = in_8(&port->lcr); + + /* select divisor latch registers. */ + out_8(&port->lcr, LCR_DLAB); + + /* now, read the divisor */ + dll = in_8(&port->dll); + dlm = in_8(&port->dlm); + divisor = dlm << 8 | dll; + + /* check prescaling */ + if (in_8(&port->mcr) & 0x80) + prescaler = 4; + else + prescaler = 1; + + /* restore the LCR */ + out_8(&port->lcr, old_lcr); + + /* calculate speed */ + speed = (clock / prescaler) / (divisor * 16); + + /* sanity check */ + if (speed < 0 || speed > (clock / 16)) + speed = 9600; + + return speed; +} + #ifdef CONFIG_PPC_MAPLE void udbg_maple_real_putc(unsigned char c) { diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c index 93d4fbf..a4815d3 100644 --- a/arch/powerpc/mm/fault.c +++ b/arch/powerpc/mm/fault.c @@ -81,7 +81,8 @@ static int store_updates_sp(struct pt_regs *regs) } #if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE)) -static void do_dabr(struct pt_regs *regs, unsigned long error_code) +static void do_dabr(struct pt_regs *regs, unsigned long address, + unsigned long error_code) { siginfo_t info; @@ -99,7 +100,7 @@ static void do_dabr(struct pt_regs *regs, unsigned long error_code) info.si_signo = SIGTRAP; info.si_errno = 0; info.si_code = TRAP_HWBKPT; - info.si_addr = (void __user *)regs->nip; + info.si_addr = (void __user *)address; force_sig_info(SIGTRAP, &info, current); } #endif /* !(CONFIG_4xx || CONFIG_BOOKE)*/ @@ -159,7 +160,7 @@ int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address, #if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE)) if (error_code & DSISR_DABRMATCH) { /* DABR match */ - do_dabr(regs, error_code); + do_dabr(regs, address, error_code); return 0; } #endif /* !(CONFIG_4xx || CONFIG_BOOKE)*/ diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index a606504..5bb433c 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -456,7 +456,7 @@ void __init htab_initialize(void) /* create bolted the linear mapping in the hash table */ for (i=0; i < lmb.memory.cnt; i++) { - base = lmb.memory.region[i].base + KERNELBASE; + base = (unsigned long)__va(lmb.memory.region[i].base); size = lmb.memory.region[i].size; DBG("creating mapping for region: %lx : %lx\n", base, size); @@ -498,8 +498,8 @@ void __init htab_initialize(void) * for either 4K or 16MB pages. */ if (tce_alloc_start) { - tce_alloc_start += KERNELBASE; - tce_alloc_end += KERNELBASE; + tce_alloc_start = (unsigned long)__va(tce_alloc_start); + tce_alloc_end = (unsigned long)__va(tce_alloc_end); if (base + size >= tce_alloc_start) tce_alloc_start = base + size + 1; @@ -644,6 +644,7 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap) DBG_LOW(" -> rc=%d\n", rc); return rc; } +EXPORT_SYMBOL_GPL(hash_page); void hash_preload(struct mm_struct *mm, unsigned long ea, unsigned long access, unsigned long trap) diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index 54131b8..b51bb28 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -549,6 +549,17 @@ fail: return addr; } +static int htlb_check_hinted_area(unsigned long addr, unsigned long len) +{ + struct vm_area_struct *vma; + + vma = find_vma(current->mm, addr); + if (!vma || ((addr + len) <= vma->vm_start)) + return 0; + + return -ENOMEM; +} + static unsigned long htlb_get_low_area(unsigned long len, u16 segmask) { unsigned long addr = 0; @@ -618,15 +629,28 @@ unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr, if (!cpu_has_feature(CPU_FTR_16M_PAGE)) return -EINVAL; + /* Paranoia, caller should have dealt with this */ + BUG_ON((addr + len) < addr); + if (test_thread_flag(TIF_32BIT)) { + /* Paranoia, caller should have dealt with this */ + BUG_ON((addr + len) > 0x100000000UL); + curareas = current->mm->context.low_htlb_areas; - /* First see if we can do the mapping in the existing - * low areas */ + /* First see if we can use the hint address */ + if (addr && (htlb_check_hinted_area(addr, len) == 0)) { + areamask = LOW_ESID_MASK(addr, len); + if (open_low_hpage_areas(current->mm, areamask) == 0) + return addr; + } + + /* Next see if we can map in the existing low areas */ addr = htlb_get_low_area(len, curareas); if (addr != -ENOMEM) return addr; + /* Finally go looking for areas to open */ lastshift = 0; for (areamask = LOW_ESID_MASK(0x100000000UL-len, len); ! lastshift; areamask >>=1) { @@ -641,12 +665,22 @@ unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr, } else { curareas = current->mm->context.high_htlb_areas; - /* First see if we can do the mapping in the existing - * high areas */ + /* First see if we can use the hint address */ + /* We discourage 64-bit processes from doing hugepage + * mappings below 4GB (must use MAP_FIXED) */ + if ((addr >= 0x100000000UL) + && (htlb_check_hinted_area(addr, len) == 0)) { + areamask = HTLB_AREA_MASK(addr, len); + if (open_high_hpage_areas(current->mm, areamask) == 0) + return addr; + } + + /* Next see if we can map in the existing high areas */ addr = htlb_get_high_area(len, curareas); if (addr != -ENOMEM) return addr; + /* Finally go looking for areas to open */ lastshift = 0; for (areamask = HTLB_AREA_MASK(TASK_SIZE_USER64-len, len); ! lastshift; areamask >>=1) { diff --git a/arch/powerpc/mm/imalloc.c b/arch/powerpc/mm/imalloc.c index f9587bc..8b0c132 100644 --- a/arch/powerpc/mm/imalloc.c +++ b/arch/powerpc/mm/imalloc.c @@ -107,6 +107,7 @@ static int im_region_status(unsigned long v_addr, unsigned long size, if (v_addr < (unsigned long) tmp->addr + tmp->size) break; + *vm = NULL; if (tmp) { if (im_region_overlaps(v_addr, size, tmp)) return IM_REGION_OVERLAP; @@ -127,7 +128,6 @@ static int im_region_status(unsigned long v_addr, unsigned long size, } } - *vm = NULL; return IM_REGION_UNUSED; } diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c index 7d4b8b5..7d0d75c 100644 --- a/arch/powerpc/mm/init_32.c +++ b/arch/powerpc/mm/init_32.c @@ -188,6 +188,11 @@ void __init MMU_init(void) if (ppc_md.progress) ppc_md.progress("MMU:exit", 0x211); + + /* From now on, btext is no longer BAT mapped if it was at all */ +#ifdef CONFIG_BOOTX_TEXT + btext_unmap(); +#endif } /* This is only called until mem_init is done. */ diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index ed6ed2e..15aac0d 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -114,19 +114,18 @@ void online_page(struct page *page) num_physpages++; } -/* - * This works only for the non-NUMA case. Later, we'll need a lookup - * to convert from real physical addresses to nid, that doesn't use - * pfn_to_nid(). - */ int __devinit add_memory(u64 start, u64 size) { - struct pglist_data *pgdata = NODE_DATA(0); + struct pglist_data *pgdata; struct zone *zone; + int nid; unsigned long start_pfn = start >> PAGE_SHIFT; unsigned long nr_pages = size >> PAGE_SHIFT; - start += KERNELBASE; + nid = hot_add_scn_to_nid(start); + pgdata = NODE_DATA(nid); + + start = __va(start); create_section_mapping(start, start + size); /* this should work for most non-highmem platforms */ diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index ba7a305..2863a91 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -37,6 +37,7 @@ EXPORT_SYMBOL(node_data); static bootmem_data_t __initdata plat_node_bdata[MAX_NUMNODES]; static int min_common_depth; +static int n_mem_addr_cells, n_mem_size_cells; /* * We need somewhere to store start/end/node for each region until we have @@ -254,32 +255,20 @@ static int __init find_min_common_depth(void) return depth; } -static int __init get_mem_addr_cells(void) +static void __init get_n_mem_cells(int *n_addr_cells, int *n_size_cells) { struct device_node *memory = NULL; - int rc; memory = of_find_node_by_type(memory, "memory"); if (!memory) - return 0; /* it won't matter */ + panic("numa.c: No memory nodes found!"); - rc = prom_n_addr_cells(memory); - return rc; + *n_addr_cells = prom_n_addr_cells(memory); + *n_size_cells = prom_n_size_cells(memory); + of_node_put(memory); } -static int __init get_mem_size_cells(void) -{ - struct device_node *memory = NULL; - int rc; - - memory = of_find_node_by_type(memory, "memory"); - if (!memory) - return 0; /* it won't matter */ - rc = prom_n_size_cells(memory); - return rc; -} - -static unsigned long __init read_n_cells(int n, unsigned int **buf) +static unsigned long __devinit read_n_cells(int n, unsigned int **buf) { unsigned long result = 0; @@ -386,7 +375,6 @@ static int __init parse_numa_properties(void) { struct device_node *cpu = NULL; struct device_node *memory = NULL; - int addr_cells, size_cells; int max_domain; unsigned long i; @@ -425,8 +413,7 @@ static int __init parse_numa_properties(void) } } - addr_cells = get_mem_addr_cells(); - size_cells = get_mem_size_cells(); + get_n_mem_cells(&n_mem_addr_cells, &n_mem_size_cells); memory = NULL; while ((memory = of_find_node_by_type(memory, "memory")) != NULL) { unsigned long start; @@ -436,15 +423,21 @@ static int __init parse_numa_properties(void) unsigned int *memcell_buf; unsigned int len; - memcell_buf = (unsigned int *)get_property(memory, "reg", &len); + memcell_buf = (unsigned int *)get_property(memory, + "linux,usable-memory", &len); + if (!memcell_buf || len <= 0) + memcell_buf = + (unsigned int *)get_property(memory, "reg", + &len); if (!memcell_buf || len <= 0) continue; - ranges = memory->n_addrs; + /* ranges in cell */ + ranges = (len >> 2) / (n_mem_addr_cells + n_mem_size_cells); new_range: /* these are order-sensitive, and modify the buffer pointer */ - start = read_n_cells(addr_cells, &memcell_buf); - size = read_n_cells(size_cells, &memcell_buf); + start = read_n_cells(n_mem_addr_cells, &memcell_buf); + size = read_n_cells(n_mem_size_cells, &memcell_buf); numa_domain = of_node_numa_domain(memory); @@ -497,7 +490,41 @@ static void __init setup_nonnuma(void) node_set_online(0); } -static void __init dump_numa_topology(void) +void __init dump_numa_cpu_topology(void) +{ + unsigned int node; + unsigned int cpu, count; + + if (min_common_depth == -1 || !numa_enabled) + return; + + for_each_online_node(node) { + printk(KERN_INFO "Node %d CPUs:", node); + + count = 0; + /* + * If we used a CPU iterator here we would miss printing + * the holes in the cpumap. + */ + for (cpu = 0; cpu < NR_CPUS; cpu++) { + if (cpu_isset(cpu, numa_cpumask_lookup_table[node])) { + if (count == 0) + printk(" %u", cpu); + ++count; + } else { + if (count > 1) + printk("-%u", cpu - 1); + count = 0; + } + } + + if (count > 1) + printk("-%u", NR_CPUS - 1); + printk("\n"); + } +} + +static void __init dump_numa_memory_topology(void) { unsigned int node; unsigned int count; @@ -529,7 +556,6 @@ static void __init dump_numa_topology(void) printk("-0x%lx", i); printk("\n"); } - return; } /* @@ -591,7 +617,7 @@ void __init do_init_bootmem(void) if (parse_numa_properties()) setup_nonnuma(); else - dump_numa_topology(); + dump_numa_memory_topology(); register_cpu_notifier(&ppc64_numa_nb); @@ -730,3 +756,60 @@ static int __init early_numa(char *p) return 0; } early_param("numa", early_numa); + +#ifdef CONFIG_MEMORY_HOTPLUG +/* + * Find the node associated with a hot added memory section. Section + * corresponds to a SPARSEMEM section, not an LMB. It is assumed that + * sections are fully contained within a single LMB. + */ +int hot_add_scn_to_nid(unsigned long scn_addr) +{ + struct device_node *memory = NULL; + nodemask_t nodes; + int numa_domain = 0; + + if (!numa_enabled || (min_common_depth < 0)) + return numa_domain; + + while ((memory = of_find_node_by_type(memory, "memory")) != NULL) { + unsigned long start, size; + int ranges; + unsigned int *memcell_buf; + unsigned int len; + + memcell_buf = (unsigned int *)get_property(memory, "reg", &len); + if (!memcell_buf || len <= 0) + continue; + + /* ranges in cell */ + ranges = (len >> 2) / (n_mem_addr_cells + n_mem_size_cells); +ha_new_range: + start = read_n_cells(n_mem_addr_cells, &memcell_buf); + size = read_n_cells(n_mem_size_cells, &memcell_buf); + numa_domain = of_node_numa_domain(memory); + + /* Domains not present at boot default to 0 */ + if (!node_online(numa_domain)) + numa_domain = any_online_node(NODE_MASK_ALL); + + if ((scn_addr >= start) && (scn_addr < (start + size))) { + of_node_put(memory); + goto got_numa_domain; + } + + if (--ranges) /* process all ranges in cell */ + goto ha_new_range; + } + BUG(); /* section address should be found above */ + + /* Temporary code to ensure that returned node is not empty */ +got_numa_domain: + nodes_setall(nodes); + while (NODE_DATA(numa_domain)->node_spanned_pages == 0) { + node_clear(numa_domain, nodes); + numa_domain = any_online_node(nodes); + } + return numa_domain; +} +#endif /* CONFIG_MEMORY_HOTPLUG */ diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c index 60e852f..ffc8ed4 100644 --- a/arch/powerpc/mm/slb.c +++ b/arch/powerpc/mm/slb.c @@ -75,7 +75,7 @@ static void slb_flush_and_rebolt(void) vflags = SLB_VSID_KERNEL | virtual_llp; ksp_esid_data = mk_esid_data(get_paca()->kstack, 2); - if ((ksp_esid_data & ESID_MASK) == KERNELBASE) + if ((ksp_esid_data & ESID_MASK) == PAGE_OFFSET) ksp_esid_data &= ~SLB_ESID_V; /* We need to do this all in asm, so we're sure we don't touch @@ -87,8 +87,8 @@ static void slb_flush_and_rebolt(void) /* Slot 2 - kernel stack */ "slbmte %2,%3\n" "isync" - :: "r"(mk_vsid_data(VMALLOCBASE, vflags)), - "r"(mk_esid_data(VMALLOCBASE, 1)), + :: "r"(mk_vsid_data(VMALLOC_START, vflags)), + "r"(mk_esid_data(VMALLOC_START, 1)), "r"(mk_vsid_data(ksp_esid_data, lflags)), "r"(ksp_esid_data) : "memory"); @@ -134,14 +134,14 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm) else unmapped_base = TASK_UNMAPPED_BASE_USER64; - if (pc >= KERNELBASE) + if (is_kernel_addr(pc)) return; slb_allocate(pc); if (GET_ESID(pc) == GET_ESID(stack)) return; - if (stack >= KERNELBASE) + if (is_kernel_addr(stack)) return; slb_allocate(stack); @@ -149,7 +149,7 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm) || (GET_ESID(stack) == GET_ESID(unmapped_base))) return; - if (unmapped_base >= KERNELBASE) + if (is_kernel_addr(unmapped_base)) return; slb_allocate(unmapped_base); } @@ -213,10 +213,10 @@ void slb_initialize(void) asm volatile("isync":::"memory"); asm volatile("slbmte %0,%0"::"r" (0) : "memory"); asm volatile("isync; slbia; isync":::"memory"); - create_slbe(KERNELBASE, lflags, 0); + create_slbe(PAGE_OFFSET, lflags, 0); /* VMALLOC space has 4K pages always for now */ - create_slbe(VMALLOCBASE, vflags, 1); + create_slbe(VMALLOC_START, vflags, 1); /* We don't bolt the stack for the time being - we're in boot, * so the stack is in the bolted segment. By the time it goes diff --git a/arch/powerpc/mm/slb_low.S b/arch/powerpc/mm/slb_low.S index 950ffc5..d1acee3 100644 --- a/arch/powerpc/mm/slb_low.S +++ b/arch/powerpc/mm/slb_low.S @@ -37,9 +37,9 @@ _GLOBAL(slb_allocate_realmode) srdi r9,r3,60 /* get region */ srdi r10,r3,28 /* get esid */ - cmpldi cr7,r9,0xc /* cmp KERNELBASE for later use */ + cmpldi cr7,r9,0xc /* cmp PAGE_OFFSET for later use */ - /* r3 = address, r10 = esid, cr7 = <>KERNELBASE */ + /* r3 = address, r10 = esid, cr7 = <> PAGE_OFFSET */ blt cr7,0f /* user or kernel? */ /* kernel address: proto-VSID = ESID */ @@ -166,7 +166,7 @@ _GLOBAL(slb_allocate_user) /* * Finish loading of an SLB entry and return * - * r3 = EA, r10 = proto-VSID, r11 = flags, clobbers r9, cr7 = <>KERNELBASE + * r3 = EA, r10 = proto-VSID, r11 = flags, clobbers r9, cr7 = <> PAGE_OFFSET */ slb_finish_load: ASM_VSID_SCRAMBLE(r10,r9) diff --git a/arch/powerpc/mm/stab.c b/arch/powerpc/mm/stab.c index 51e7951..82e4951 100644 --- a/arch/powerpc/mm/stab.c +++ b/arch/powerpc/mm/stab.c @@ -40,7 +40,7 @@ static int make_ste(unsigned long stab, unsigned long esid, unsigned long vsid) unsigned long entry, group, old_esid, castout_entry, i; unsigned int global_entry; struct stab_entry *ste, *castout_ste; - unsigned long kernel_segment = (esid << SID_SHIFT) >= KERNELBASE; + unsigned long kernel_segment = (esid << SID_SHIFT) >= PAGE_OFFSET; vsid_data = vsid << STE_VSID_SHIFT; esid_data = esid << SID_SHIFT | STE_ESID_KP | STE_ESID_V; @@ -83,7 +83,7 @@ static int make_ste(unsigned long stab, unsigned long esid, unsigned long vsid) } /* Dont cast out the first kernel segment */ - if ((castout_ste->esid_data & ESID_MASK) != KERNELBASE) + if ((castout_ste->esid_data & ESID_MASK) != PAGE_OFFSET) break; castout_entry = (castout_entry + 1) & 0xf; @@ -122,7 +122,7 @@ static int __ste_allocate(unsigned long ea, struct mm_struct *mm) unsigned long offset; /* Kernel or user address? */ - if (ea >= KERNELBASE) { + if (is_kernel_addr(ea)) { vsid = get_kernel_vsid(ea); } else { if ((ea >= TASK_SIZE_USER64) || (! mm)) @@ -133,7 +133,7 @@ static int __ste_allocate(unsigned long ea, struct mm_struct *mm) stab_entry = make_ste(get_paca()->stab_addr, GET_ESID(ea), vsid); - if (ea < KERNELBASE) { + if (!is_kernel_addr(ea)) { offset = __get_cpu_var(stab_cache_ptr); if (offset < NR_STAB_CACHE_ENTRIES) __get_cpu_var(stab_cache[offset++]) = stab_entry; @@ -190,7 +190,7 @@ void switch_stab(struct task_struct *tsk, struct mm_struct *mm) entry++, ste++) { unsigned long ea; ea = ste->esid_data & ESID_MASK; - if (ea < KERNELBASE) { + if (!is_kernel_addr(ea)) { ste->esid_data = 0; } } @@ -251,7 +251,7 @@ void stabs_alloc(void) panic("Unable to allocate segment table for CPU %d.\n", cpu); - newstab += KERNELBASE; + newstab = (unsigned long)__va(newstab); memset((void *)newstab, 0, HW_PAGE_SIZE); @@ -270,11 +270,11 @@ void stabs_alloc(void) */ void stab_initialize(unsigned long stab) { - unsigned long vsid = get_kernel_vsid(KERNELBASE); + unsigned long vsid = get_kernel_vsid(PAGE_OFFSET); unsigned long stabreal; asm volatile("isync; slbia; isync":::"memory"); - make_ste(stab, GET_ESID(KERNELBASE), vsid); + make_ste(stab, GET_ESID(PAGE_OFFSET), vsid); /* Order update */ asm volatile("sync":::"memory"); diff --git a/arch/powerpc/mm/tlb_64.c b/arch/powerpc/mm/tlb_64.c index 859d29a..bb3afb6 100644 --- a/arch/powerpc/mm/tlb_64.c +++ b/arch/powerpc/mm/tlb_64.c @@ -168,7 +168,7 @@ void hpte_update(struct mm_struct *mm, unsigned long addr, batch->mm = mm; batch->psize = psize; } - if (addr < KERNELBASE) { + if (!is_kernel_addr(addr)) { vsid = get_vsid(mm->context.id, addr); WARN_ON(vsid == 0); } else diff --git a/arch/powerpc/oprofile/Makefile b/arch/powerpc/oprofile/Makefile index 0782d0c..554cd7c 100644 --- a/arch/powerpc/oprofile/Makefile +++ b/arch/powerpc/oprofile/Makefile @@ -9,3 +9,4 @@ DRIVER_OBJS := $(addprefix ../../../drivers/oprofile/, \ oprofile-y := $(DRIVER_OBJS) common.o oprofile-$(CONFIG_PPC64) += op_model_rs64.o op_model_power4.o oprofile-$(CONFIG_FSL_BOOKE) += op_model_fsl_booke.o +oprofile-$(CONFIG_PPC32) += op_model_7450.o diff --git a/arch/powerpc/oprofile/common.c b/arch/powerpc/oprofile/common.c index af2c05d..71615eb 100644 --- a/arch/powerpc/oprofile/common.c +++ b/arch/powerpc/oprofile/common.c @@ -14,9 +14,6 @@ */ #include <linux/oprofile.h> -#ifndef __powerpc64__ -#include <linux/slab.h> -#endif /* ! __powerpc64__ */ #include <linux/init.h> #include <linux/smp.h> #include <linux/errno.h> @@ -31,10 +28,6 @@ static struct op_powerpc_model *model; static struct op_counter_config ctr[OP_MAX_COUNTER]; static struct op_system_config sys; -#ifndef __powerpc64__ -static char *cpu_type; -#endif /* ! __powerpc64__ */ - static void op_handle_interrupt(struct pt_regs *regs) { model->handle_interrupt(regs, ctr); @@ -53,14 +46,7 @@ static int op_powerpc_setup(void) model->reg_setup(ctr, &sys, model->num_counters); /* Configure the registers on all cpus. */ -#ifdef __powerpc64__ on_each_cpu(model->cpu_setup, NULL, 0, 1); -#else /* __powerpc64__ */ -#if 0 - /* FIXME: Make multi-cpu work */ - on_each_cpu(model->reg_setup, NULL, 0, 1); -#endif -#endif /* __powerpc64__ */ return 0; } @@ -95,7 +81,7 @@ static int op_powerpc_create_files(struct super_block *sb, struct dentry *root) { int i; -#ifdef __powerpc64__ +#ifdef CONFIG_PPC64 /* * There is one mmcr0, mmcr1 and mmcra for setting the events for * all of the counters. @@ -103,7 +89,7 @@ static int op_powerpc_create_files(struct super_block *sb, struct dentry *root) oprofilefs_create_ulong(sb, root, "mmcr0", &sys.mmcr0); oprofilefs_create_ulong(sb, root, "mmcr1", &sys.mmcr1); oprofilefs_create_ulong(sb, root, "mmcra", &sys.mmcra); -#endif /* __powerpc64__ */ +#endif for (i = 0; i < model->num_counters; ++i) { struct dentry *dir; @@ -115,65 +101,68 @@ static int op_powerpc_create_files(struct super_block *sb, struct dentry *root) oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled); oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event); oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count); -#ifdef __powerpc64__ + /* - * We dont support per counter user/kernel selection, but - * we leave the entries because userspace expects them + * Classic PowerPC doesn't support per-counter + * control like this, but the options are + * expected, so they remain. For Freescale + * Book-E style performance monitors, we do + * support them. */ -#endif /* __powerpc64__ */ oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel); oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user); -#ifndef __powerpc64__ - /* FIXME: Not sure if this is used */ -#endif /* ! __powerpc64__ */ oprofilefs_create_ulong(sb, dir, "unit_mask", &ctr[i].unit_mask); } oprofilefs_create_ulong(sb, root, "enable_kernel", &sys.enable_kernel); oprofilefs_create_ulong(sb, root, "enable_user", &sys.enable_user); -#ifdef __powerpc64__ +#ifdef CONFIG_PPC64 oprofilefs_create_ulong(sb, root, "backtrace_spinlocks", &sys.backtrace_spinlocks); -#endif /* __powerpc64__ */ +#endif /* Default to tracing both kernel and user */ sys.enable_kernel = 1; sys.enable_user = 1; -#ifdef __powerpc64__ +#ifdef CONFIG_PPC64 /* Turn on backtracing through spinlocks by default */ sys.backtrace_spinlocks = 1; -#endif /* __powerpc64__ */ +#endif return 0; } int __init oprofile_arch_init(struct oprofile_operations *ops) { -#ifndef __powerpc64__ -#ifdef CONFIG_FSL_BOOKE - model = &op_model_fsl_booke; + if (!cur_cpu_spec->oprofile_cpu_type) + return -ENODEV; + + switch (cur_cpu_spec->oprofile_type) { +#ifdef CONFIG_PPC64 + case RS64: + model = &op_model_rs64; + break; + case POWER4: + model = &op_model_power4; + break; #else - return -ENODEV; + case G4: + model = &op_model_7450; + break; #endif +#ifdef CONFIG_FSL_BOOKE + case BOOKE: + model = &op_model_fsl_booke; + break; +#endif + default: + return -ENODEV; + } - cpu_type = kmalloc(32, GFP_KERNEL); - if (NULL == cpu_type) - return -ENOMEM; - - sprintf(cpu_type, "ppc/%s", cur_cpu_spec->cpu_name); - - model->num_counters = cur_cpu_spec->num_pmcs; - - ops->cpu_type = cpu_type; -#else /* __powerpc64__ */ - if (!cur_cpu_spec->oprofile_model || !cur_cpu_spec->oprofile_cpu_type) - return -ENODEV; - model = cur_cpu_spec->oprofile_model; model->num_counters = cur_cpu_spec->num_pmcs; ops->cpu_type = cur_cpu_spec->oprofile_cpu_type; -#endif /* __powerpc64__ */ ops->create_files = op_powerpc_create_files; ops->setup = op_powerpc_setup; ops->shutdown = op_powerpc_shutdown; @@ -188,8 +177,4 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) void oprofile_arch_exit(void) { -#ifndef __powerpc64__ - kfree(cpu_type); - cpu_type = NULL; -#endif /* ! __powerpc64__ */ } diff --git a/arch/powerpc/oprofile/op_model_7450.c b/arch/powerpc/oprofile/op_model_7450.c new file mode 100644 index 0000000..32abfdb --- /dev/null +++ b/arch/powerpc/oprofile/op_model_7450.c @@ -0,0 +1,206 @@ +/* + * oprofile/op_model_7450.c + * + * Freescale 745x/744x oprofile support, based on fsl_booke support + * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM + * + * Copyright (c) 2004 Freescale Semiconductor, Inc + * + * Author: Andy Fleming + * Maintainer: Kumar Gala <galak@kernel.crashing.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/oprofile.h> +#include <linux/init.h> +#include <linux/smp.h> +#include <asm/ptrace.h> +#include <asm/system.h> +#include <asm/processor.h> +#include <asm/cputable.h> +#include <asm/page.h> +#include <asm/pmc.h> +#include <asm/oprofile_impl.h> + +static unsigned long reset_value[OP_MAX_COUNTER]; + +static int oprofile_running; +static u32 mmcr0_val, mmcr1_val, mmcr2_val; + +#define MMCR0_PMC1_SHIFT 6 +#define MMCR0_PMC2_SHIFT 0 +#define MMCR1_PMC3_SHIFT 27 +#define MMCR1_PMC4_SHIFT 22 +#define MMCR1_PMC5_SHIFT 17 +#define MMCR1_PMC6_SHIFT 11 + +#define mmcr0_event1(event) \ + ((event << MMCR0_PMC1_SHIFT) & MMCR0_PMC1SEL) +#define mmcr0_event2(event) \ + ((event << MMCR0_PMC2_SHIFT) & MMCR0_PMC2SEL) + +#define mmcr1_event3(event) \ + ((event << MMCR1_PMC3_SHIFT) & MMCR1_PMC3SEL) +#define mmcr1_event4(event) \ + ((event << MMCR1_PMC4_SHIFT) & MMCR1_PMC4SEL) +#define mmcr1_event5(event) \ + ((event << MMCR1_PMC5_SHIFT) & MMCR1_PMC5SEL) +#define mmcr1_event6(event) \ + ((event << MMCR1_PMC6_SHIFT) & MMCR1_PMC6SEL) + +#define MMCR0_INIT (MMCR0_FC | MMCR0_FCS | MMCR0_FCP | MMCR0_FCM1 | MMCR0_FCM0) + +/* Unfreezes the counters on this CPU, enables the interrupt, + * enables the counters to trigger the interrupt, and sets the + * counters to only count when the mark bit is not set. + */ +static void pmc_start_ctrs(void) +{ + u32 mmcr0 = mfspr(SPRN_MMCR0); + + mmcr0 &= ~(MMCR0_FC | MMCR0_FCM0); + mmcr0 |= (MMCR0_FCECE | MMCR0_PMC1CE | MMCR0_PMCnCE | MMCR0_PMXE); + + mtspr(SPRN_MMCR0, mmcr0); +} + +/* Disables the counters on this CPU, and freezes them */ +static void pmc_stop_ctrs(void) +{ + u32 mmcr0 = mfspr(SPRN_MMCR0); + + mmcr0 |= MMCR0_FC; + mmcr0 &= ~(MMCR0_FCECE | MMCR0_PMC1CE | MMCR0_PMCnCE | MMCR0_PMXE); + + mtspr(SPRN_MMCR0, mmcr0); +} + +/* Configures the counters on this CPU based on the global + * settings */ +static void fsl7450_cpu_setup(void *unused) +{ + /* freeze all counters */ + pmc_stop_ctrs(); + + mtspr(SPRN_MMCR0, mmcr0_val); + mtspr(SPRN_MMCR1, mmcr1_val); + mtspr(SPRN_MMCR2, mmcr2_val); +} + +#define NUM_CTRS 6 + +/* Configures the global settings for the countes on all CPUs. */ +static void fsl7450_reg_setup(struct op_counter_config *ctr, + struct op_system_config *sys, + int num_ctrs) +{ + int i; + + /* Our counters count up, and "count" refers to + * how much before the next interrupt, and we interrupt + * on overflow. So we calculate the starting value + * which will give us "count" until overflow. + * Then we set the events on the enabled counters */ + for (i = 0; i < NUM_CTRS; ++i) + reset_value[i] = 0x80000000UL - ctr[i].count; + + /* Set events for Counters 1 & 2 */ + mmcr0_val = MMCR0_INIT | mmcr0_event1(ctr[0].event) + | mmcr0_event2(ctr[1].event); + + /* Setup user/kernel bits */ + if (sys->enable_kernel) + mmcr0_val &= ~(MMCR0_FCS); + + if (sys->enable_user) + mmcr0_val &= ~(MMCR0_FCP); + + /* Set events for Counters 3-6 */ + mmcr1_val = mmcr1_event3(ctr[2].event) + | mmcr1_event4(ctr[3].event) + | mmcr1_event5(ctr[4].event) + | mmcr1_event6(ctr[5].event); + + mmcr2_val = 0; +} + +/* Sets the counters on this CPU to the chosen values, and starts them */ +static void fsl7450_start(struct op_counter_config *ctr) +{ + int i; + + mtmsr(mfmsr() | MSR_PMM); + + for (i = 0; i < NUM_CTRS; ++i) { + if (ctr[i].enabled) + ctr_write(i, reset_value[i]); + else + ctr_write(i, 0); + } + + /* Clear the freeze bit, and enable the interrupt. + * The counters won't actually start until the rfi clears + * the PMM bit */ + pmc_start_ctrs(); + + oprofile_running = 1; +} + +/* Stop the counters on this CPU */ +static void fsl7450_stop(void) +{ + /* freeze counters */ + pmc_stop_ctrs(); + + oprofile_running = 0; + + mb(); +} + + +/* Handle the interrupt on this CPU, and log a sample for each + * event that triggered the interrupt */ +static void fsl7450_handle_interrupt(struct pt_regs *regs, + struct op_counter_config *ctr) +{ + unsigned long pc; + int is_kernel; + int val; + int i; + + /* set the PMM bit (see comment below) */ + mtmsr(mfmsr() | MSR_PMM); + + pc = mfspr(SPRN_SIAR); + is_kernel = (pc >= KERNELBASE); + + for (i = 0; i < NUM_CTRS; ++i) { + val = ctr_read(i); + if (val < 0) { + if (oprofile_running && ctr[i].enabled) { + oprofile_add_pc(pc, is_kernel, i); + ctr_write(i, reset_value[i]); + } else { + ctr_write(i, 0); + } + } + } + + /* The freeze bit was set by the interrupt. */ + /* Clear the freeze bit, and reenable the interrupt. + * The counters won't actually start until the rfi clears + * the PMM bit */ + pmc_start_ctrs(); +} + +struct op_powerpc_model op_model_7450= { + .reg_setup = fsl7450_reg_setup, + .cpu_setup = fsl7450_cpu_setup, + .start = fsl7450_start, + .stop = fsl7450_stop, + .handle_interrupt = fsl7450_handle_interrupt, +}; diff --git a/arch/powerpc/oprofile/op_model_power4.c b/arch/powerpc/oprofile/op_model_power4.c index a3401b4..659a021 100644 --- a/arch/powerpc/oprofile/op_model_power4.c +++ b/arch/powerpc/oprofile/op_model_power4.c @@ -252,7 +252,7 @@ static unsigned long get_pc(struct pt_regs *regs) return (unsigned long)__va(pc); /* Not sure where we were */ - if (pc < KERNELBASE) + if (!is_kernel_addr(pc)) /* function descriptor madness */ return *((unsigned long *)kernel_unknown_bucket); @@ -264,7 +264,7 @@ static int get_kernel(unsigned long pc) int is_kernel; if (!mmcra_has_sihv) { - is_kernel = (pc >= KERNELBASE); + is_kernel = is_kernel_addr(pc); } else { unsigned long mmcra = mfspr(SPRN_MMCRA); is_kernel = ((mmcra & MMCRA_SIPR) == 0); diff --git a/arch/powerpc/oprofile/op_model_rs64.c b/arch/powerpc/oprofile/op_model_rs64.c index e010b85..5c909ee 100644 --- a/arch/powerpc/oprofile/op_model_rs64.c +++ b/arch/powerpc/oprofile/op_model_rs64.c @@ -178,7 +178,6 @@ static void rs64_handle_interrupt(struct pt_regs *regs, int val; int i; unsigned long pc = mfspr(SPRN_SIAR); - int is_kernel = (pc >= KERNELBASE); /* set the PMM bit (see comment below) */ mtmsrd(mfmsr() | MSR_PMM); @@ -187,7 +186,7 @@ static void rs64_handle_interrupt(struct pt_regs *regs, val = ctr_read(i); if (val < 0) { if (ctr[i].enabled) { - oprofile_add_pc(pc, is_kernel, i); + oprofile_add_pc(pc, is_kernel_addr(pc), i); ctr_write(i, reset_value[i]); } else { ctr_write(i, 0); diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig new file mode 100644 index 0000000..3157071 --- /dev/null +++ b/arch/powerpc/platforms/cell/Kconfig @@ -0,0 +1,13 @@ +menu "Cell Broadband Engine options" + depends on PPC_CELL + +config SPU_FS + tristate "SPU file system" + default m + depends on PPC_CELL + help + The SPU file system is used to access Synergistic Processing + Units on machines implementing the Broadband Processor + Architecture. + +endmenu diff --git a/arch/powerpc/platforms/cell/Makefile b/arch/powerpc/platforms/cell/Makefile index 55e094b..16031b5 100644 --- a/arch/powerpc/platforms/cell/Makefile +++ b/arch/powerpc/platforms/cell/Makefile @@ -1,2 +1,10 @@ obj-y += interrupt.o iommu.o setup.o spider-pic.o +obj-y += pervasive.o + obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_SPU_FS) += spufs/ spu-base.o + +spu-base-y += spu_base.o spu_priv1.o + +builtin-spufs-$(CONFIG_SPU_FS) += spu_syscalls.o +obj-y += $(builtin-spufs-m) diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c index 7fbe78a..63aa52a 100644 --- a/arch/powerpc/platforms/cell/interrupt.c +++ b/arch/powerpc/platforms/cell/interrupt.c @@ -23,6 +23,7 @@ #include <linux/config.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/module.h> #include <linux/percpu.h> #include <linux/types.h> @@ -55,6 +56,7 @@ struct iic_regs { struct iic { struct iic_regs __iomem *regs; + u8 target_id; }; static DEFINE_PER_CPU(struct iic, iic); @@ -172,12 +174,11 @@ int iic_get_irq(struct pt_regs *regs) return irq; } -static struct iic_regs __iomem *find_iic(int cpu) +static int setup_iic(int cpu, struct iic *iic) { struct device_node *np; int nodeid = cpu / 2; unsigned long regs; - struct iic_regs __iomem *iic_regs; for (np = of_find_node_by_type(NULL, "cpu"); np; @@ -188,20 +189,23 @@ static struct iic_regs __iomem *find_iic(int cpu) if (!np) { printk(KERN_WARNING "IIC: CPU %d not found\n", cpu); - iic_regs = NULL; - } else { - regs = *(long *)get_property(np, "iic", NULL); - - /* hack until we have decided on the devtree info */ - regs += 0x400; - if (cpu & 1) - regs += 0x20; - - printk(KERN_DEBUG "IIC for CPU %d at %lx\n", cpu, regs); - iic_regs = __ioremap(regs, sizeof(struct iic_regs), - _PAGE_NO_CACHE); + iic->regs = NULL; + iic->target_id = 0xff; + return -ENODEV; } - return iic_regs; + + regs = *(long *)get_property(np, "iic", NULL); + + /* hack until we have decided on the devtree info */ + regs += 0x400; + if (cpu & 1) + regs += 0x20; + + printk(KERN_DEBUG "IIC for CPU %d at %lx\n", cpu, regs); + iic->regs = __ioremap(regs, sizeof(struct iic_regs), + _PAGE_NO_CACHE); + iic->target_id = (nodeid << 4) + ((cpu & 1) ? 0xf : 0xe); + return 0; } #ifdef CONFIG_SMP @@ -227,6 +231,12 @@ void iic_cause_IPI(int cpu, int mesg) out_be64(&per_cpu(iic, cpu).regs->generate, (IIC_NUM_IPIS - 1 - mesg) << 4); } +u8 iic_get_target_id(int cpu) +{ + return per_cpu(iic, cpu).target_id; +} +EXPORT_SYMBOL_GPL(iic_get_target_id); + static irqreturn_t iic_ipi_action(int irq, void *dev_id, struct pt_regs *regs) { smp_message_recv(iic_irq_to_ipi(irq), regs); @@ -276,7 +286,7 @@ void iic_init_IRQ(void) irq_offset = 0; for_each_cpu(cpu) { iic = &per_cpu(iic, cpu); - iic->regs = find_iic(cpu); + setup_iic(cpu, iic); if (iic->regs) out_be64(&iic->regs->prio, 0xff); } diff --git a/arch/powerpc/platforms/cell/interrupt.h b/arch/powerpc/platforms/cell/interrupt.h index 37d58e6..a14bd38 100644 --- a/arch/powerpc/platforms/cell/interrupt.h +++ b/arch/powerpc/platforms/cell/interrupt.h @@ -54,6 +54,7 @@ extern void iic_setup_cpu(void); extern void iic_local_enable(void); extern void iic_local_disable(void); +extern u8 iic_get_target_id(int cpu); extern void spider_init_IRQ(void); extern int spider_get_irq(unsigned long int_pending); diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index 74f999b..46e7cb9 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -29,6 +29,8 @@ #include <linux/bootmem.h> #include <linux/mm.h> #include <linux/dma-mapping.h> +#include <linux/kernel.h> +#include <linux/compiler.h> #include <asm/sections.h> #include <asm/iommu.h> @@ -40,6 +42,7 @@ #include <asm/abs_addr.h> #include <asm/system.h> #include <asm/ppc-pci.h> +#include <asm/udbg.h> #include "iommu.h" @@ -220,8 +223,6 @@ set_iopt_cache(void __iomem *base, unsigned long index, { unsigned long __iomem *tags = base + IOC_PT_CACHE_DIR; unsigned long __iomem *p = base + IOC_PT_CACHE_REG; - pr_debug("iopt %02lx was v%016lx/t%016lx, store v%016lx/t%016lx\n", - index, get_iopt_cache(base, index, &oldtag), oldtag, val, tag); out_be64(p, val); out_be64(&tags[index], tag); @@ -248,67 +249,176 @@ set_iocmd_config(void __iomem *base) out_be64(p, conf | IOCMD_CONF_TE); } -/* FIXME: get these from the device tree */ -#define ioc_base 0x20000511000ull -#define ioc_mmio_base 0x20000510000ull -#define ioid 0x48a -#define iopt_phys_offset (- 0x20000000) /* We have a 512MB offset from the SB */ -#define io_page_size 0x1000000 - -static unsigned long map_iopt_entry(unsigned long address) +static void enable_mapping(void __iomem *base, void __iomem *mmio_base) { - switch (address >> 20) { - case 0x600: - address = 0x24020000000ull; /* spider i/o */ - break; - default: - address += iopt_phys_offset; - break; - } - - return get_iopt_entry(address, ioid, IOPT_PROT_RW); + set_iocmd_config(base); + set_iost_origin(mmio_base); } -static void iommu_bus_setup_null(struct pci_bus *b) { } static void iommu_dev_setup_null(struct pci_dev *d) { } +static void iommu_bus_setup_null(struct pci_bus *b) { } + +struct cell_iommu { + unsigned long base; + unsigned long mmio_base; + void __iomem *mapped_base; + void __iomem *mapped_mmio_base; +}; + +static struct cell_iommu cell_iommus[NR_CPUS]; /* initialize the iommu to support a simple linear mapping * for each DMA window used by any device. For now, we * happen to know that there is only one DMA window in use, * starting at iopt_phys_offset. */ -static void cell_map_iommu(void) +static void cell_do_map_iommu(struct cell_iommu *iommu, + unsigned int ioid, + unsigned long map_start, + unsigned long map_size) { - unsigned long address; - void __iomem *base; + unsigned long io_address, real_address; + void __iomem *ioc_base, *ioc_mmio_base; ioste ioste; unsigned long index; - base = __ioremap(ioc_base, 0x1000, _PAGE_NO_CACHE); - pr_debug("%lx mapped to %p\n", ioc_base, base); - set_iocmd_config(base); - iounmap(base); + /* we pretend the io page table was at a very high address */ + const unsigned long fake_iopt = 0x10000000000ul; + const unsigned long io_page_size = 0x1000000; /* use 16M pages */ + const unsigned long io_segment_size = 0x10000000; /* 256M */ + + ioc_base = iommu->mapped_base; + ioc_mmio_base = iommu->mapped_mmio_base; + + for (real_address = 0, io_address = 0; + io_address <= map_start + map_size; + real_address += io_page_size, io_address += io_page_size) { + ioste = get_iost_entry(fake_iopt, io_address, io_page_size); + if ((real_address % io_segment_size) == 0) /* segment start */ + set_iost_cache(ioc_mmio_base, + io_address >> 28, ioste); + index = get_ioc_hash_1way(ioste, io_address); + pr_debug("addr %08lx, index %02lx, ioste %016lx\n", + io_address, index, ioste.val); + set_iopt_cache(ioc_mmio_base, + get_ioc_hash_1way(ioste, io_address), + get_ioc_tag(ioste, io_address), + get_iopt_entry(real_address-map_start, ioid, IOPT_PROT_RW)); + } +} - base = __ioremap(ioc_mmio_base, 0x1000, _PAGE_NO_CACHE); - pr_debug("%lx mapped to %p\n", ioc_mmio_base, base); +static void iommu_devnode_setup(struct device_node *d) +{ + unsigned int *ioid; + unsigned long *dma_window, map_start, map_size, token; + struct cell_iommu *iommu; - set_iost_origin(base); + ioid = (unsigned int *)get_property(d, "ioid", NULL); + if (!ioid) + pr_debug("No ioid entry found !\n"); - for (address = 0; address < 0x100000000ul; address += io_page_size) { - ioste = get_iost_entry(0x10000000000ul, address, io_page_size); - if ((address & 0xfffffff) == 0) /* segment start */ - set_iost_cache(base, address >> 28, ioste); - index = get_ioc_hash_1way(ioste, address); - pr_debug("addr %08lx, index %02lx, ioste %016lx\n", - address, index, ioste.val); - set_iopt_cache(base, - get_ioc_hash_1way(ioste, address), - get_ioc_tag(ioste, address), - map_iopt_entry(address)); - } - iounmap(base); + dma_window = (unsigned long *)get_property(d, "ibm,dma-window", NULL); + if (!dma_window) + pr_debug("No ibm,dma-window entry found !\n"); + + map_start = dma_window[1]; + map_size = dma_window[2]; + token = dma_window[0] >> 32; + + iommu = &cell_iommus[token]; + + cell_do_map_iommu(iommu, *ioid, map_start, map_size); +} + +static void iommu_bus_setup(struct pci_bus *b) +{ + struct device_node *d = (struct device_node *)b->sysdata; + iommu_devnode_setup(d); +} + + +static int cell_map_iommu_hardcoded(int num_nodes) +{ + struct cell_iommu *iommu = NULL; + + pr_debug("%s(%d): Using hardcoded defaults\n", __FUNCTION__, __LINE__); + + /* node 0 */ + iommu = &cell_iommus[0]; + iommu->mapped_base = __ioremap(0x20000511000, 0x1000, _PAGE_NO_CACHE); + iommu->mapped_mmio_base = __ioremap(0x20000510000, 0x1000, _PAGE_NO_CACHE); + + enable_mapping(iommu->mapped_base, iommu->mapped_mmio_base); + + cell_do_map_iommu(iommu, 0x048a, + 0x20000000ul,0x20000000ul); + + if (num_nodes < 2) + return 0; + + /* node 1 */ + iommu = &cell_iommus[1]; + iommu->mapped_base = __ioremap(0x30000511000, 0x1000, _PAGE_NO_CACHE); + iommu->mapped_mmio_base = __ioremap(0x30000510000, 0x1000, _PAGE_NO_CACHE); + + enable_mapping(iommu->mapped_base, iommu->mapped_mmio_base); + + cell_do_map_iommu(iommu, 0x048a, + 0x20000000,0x20000000ul); + + return 0; } +static int cell_map_iommu(void) +{ + unsigned int num_nodes = 0, *node_id; + unsigned long *base, *mmio_base; + struct device_node *dn; + struct cell_iommu *iommu = NULL; + + /* determine number of nodes (=iommus) */ + pr_debug("%s(%d): determining number of nodes...", __FUNCTION__, __LINE__); + for(dn = of_find_node_by_type(NULL, "cpu"); + dn; + dn = of_find_node_by_type(dn, "cpu")) { + node_id = (unsigned int *)get_property(dn, "node-id", NULL); + + if (num_nodes < *node_id) + num_nodes = *node_id; + } + + num_nodes++; + pr_debug("%i found.\n", num_nodes); + + /* map the iommu registers for each node */ + pr_debug("%s(%d): Looping through nodes\n", __FUNCTION__, __LINE__); + for(dn = of_find_node_by_type(NULL, "cpu"); + dn; + dn = of_find_node_by_type(dn, "cpu")) { + + node_id = (unsigned int *)get_property(dn, "node-id", NULL); + base = (unsigned long *)get_property(dn, "ioc-cache", NULL); + mmio_base = (unsigned long *)get_property(dn, "ioc-translation", NULL); + + if (!base || !mmio_base || !node_id) + return cell_map_iommu_hardcoded(num_nodes); + + iommu = &cell_iommus[*node_id]; + iommu->base = *base; + iommu->mmio_base = *mmio_base; + + iommu->mapped_base = __ioremap(*base, 0x1000, _PAGE_NO_CACHE); + iommu->mapped_mmio_base = __ioremap(*mmio_base, 0x1000, _PAGE_NO_CACHE); + + enable_mapping(iommu->mapped_base, + iommu->mapped_mmio_base); + + /* everything else will be done in iommu_bus_setup */ + } + + return 1; +} + static void *cell_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, gfp_t flag) { @@ -365,11 +475,28 @@ static int cell_dma_supported(struct device *dev, u64 mask) void cell_init_iommu(void) { - cell_map_iommu(); - - /* Direct I/O, IOMMU off */ - ppc_md.iommu_dev_setup = iommu_dev_setup_null; - ppc_md.iommu_bus_setup = iommu_bus_setup_null; + int setup_bus = 0; + + if (of_find_node_by_path("/mambo")) { + pr_info("Not using iommu on systemsim\n"); + } else { + + if (!(of_chosen && + get_property(of_chosen, "linux,iommu-off", NULL))) + setup_bus = cell_map_iommu(); + + if (setup_bus) { + pr_debug("%s: IOMMU mapping activated\n", __FUNCTION__); + ppc_md.iommu_dev_setup = iommu_dev_setup_null; + ppc_md.iommu_bus_setup = iommu_bus_setup; + } else { + pr_debug("%s: IOMMU mapping activated, " + "no device action necessary\n", __FUNCTION__); + /* Direct I/O, IOMMU off */ + ppc_md.iommu_dev_setup = iommu_dev_setup_null; + ppc_md.iommu_bus_setup = iommu_bus_setup_null; + } + } pci_dma_ops.alloc_coherent = cell_alloc_coherent; pci_dma_ops.free_coherent = cell_free_coherent; diff --git a/arch/powerpc/platforms/cell/pervasive.c b/arch/powerpc/platforms/cell/pervasive.c new file mode 100644 index 0000000..85152544 --- /dev/null +++ b/arch/powerpc/platforms/cell/pervasive.c @@ -0,0 +1,229 @@ +/* + * CBE Pervasive Monitor and Debug + * + * (C) Copyright IBM Corporation 2005 + * + * Authors: Maximino Aguilar (maguilar@us.ibm.com) + * Michael N. Day (mnday@us.ibm.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#undef DEBUG + +#include <linux/config.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/percpu.h> +#include <linux/types.h> +#include <linux/kallsyms.h> + +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/prom.h> +#include <asm/pgtable.h> +#include <asm/reg.h> + +#include "pervasive.h" + +static DEFINE_SPINLOCK(cbe_pervasive_lock); +struct cbe_pervasive { + struct pmd_regs __iomem *regs; + unsigned int thread; +}; + +/* can't use per_cpu from setup_arch */ +static struct cbe_pervasive cbe_pervasive[NR_CPUS]; + +static void __init cbe_enable_pause_zero(void) +{ + unsigned long thread_switch_control; + unsigned long temp_register; + struct cbe_pervasive *p; + int thread; + + spin_lock_irq(&cbe_pervasive_lock); + p = &cbe_pervasive[smp_processor_id()]; + + if (!cbe_pervasive->regs) + goto out; + + pr_debug("Power Management: CPU %d\n", smp_processor_id()); + + /* Enable Pause(0) control bit */ + temp_register = in_be64(&p->regs->pm_control); + + out_be64(&p->regs->pm_control, + temp_register|PMD_PAUSE_ZERO_CONTROL); + + /* Enable DEC and EE interrupt request */ + thread_switch_control = mfspr(SPRN_TSC_CELL); + thread_switch_control |= TSC_CELL_EE_ENABLE | TSC_CELL_EE_BOOST; + + switch ((mfspr(SPRN_CTRLF) & CTRL_CT)) { + case CTRL_CT0: + thread_switch_control |= TSC_CELL_DEC_ENABLE_0; + thread = 0; + break; + case CTRL_CT1: + thread_switch_control |= TSC_CELL_DEC_ENABLE_1; + thread = 1; + break; + default: + printk(KERN_WARNING "%s: unknown configuration\n", + __FUNCTION__); + thread = -1; + break; + } + + if (p->thread != thread) + printk(KERN_WARNING "%s: device tree inconsistant, " + "cpu %i: %d/%d\n", __FUNCTION__, + smp_processor_id(), + p->thread, thread); + + mtspr(SPRN_TSC_CELL, thread_switch_control); + +out: + spin_unlock_irq(&cbe_pervasive_lock); +} + +static void cbe_idle(void) +{ + unsigned long ctrl; + + cbe_enable_pause_zero(); + + while (1) { + if (!need_resched()) { + local_irq_disable(); + while (!need_resched()) { + /* go into low thread priority */ + HMT_low(); + + /* + * atomically disable thread execution + * and runlatch. + * External and Decrementer exceptions + * are still handled when the thread + * is disabled but now enter in + * cbe_system_reset_exception() + */ + ctrl = mfspr(SPRN_CTRLF); + ctrl &= ~(CTRL_RUNLATCH | CTRL_TE); + mtspr(SPRN_CTRLT, ctrl); + } + /* restore thread prio */ + HMT_medium(); + local_irq_enable(); + } + + /* + * turn runlatch on again before scheduling the + * process we just woke up + */ + ppc64_runlatch_on(); + + preempt_enable_no_resched(); + schedule(); + preempt_disable(); + } +} + +int cbe_system_reset_exception(struct pt_regs *regs) +{ + switch (regs->msr & SRR1_WAKEMASK) { + case SRR1_WAKEEE: + do_IRQ(regs); + break; + case SRR1_WAKEDEC: + timer_interrupt(regs); + break; + case SRR1_WAKEMT: + /* no action required */ + break; + default: + /* do system reset */ + return 0; + } + /* everything handled */ + return 1; +} + +static int __init cbe_find_pmd_mmio(int cpu, struct cbe_pervasive *p) +{ + struct device_node *node; + unsigned int *int_servers; + char *addr; + unsigned long real_address; + unsigned int size; + + struct pmd_regs __iomem *pmd_mmio_area; + int hardid, thread; + int proplen; + + pmd_mmio_area = NULL; + hardid = get_hard_smp_processor_id(cpu); + for (node = NULL; (node = of_find_node_by_type(node, "cpu"));) { + int_servers = (void *) get_property(node, + "ibm,ppc-interrupt-server#s", &proplen); + if (!int_servers) { + printk(KERN_WARNING "%s misses " + "ibm,ppc-interrupt-server#s property", + node->full_name); + continue; + } + for (thread = 0; thread < proplen / sizeof (int); thread++) { + if (hardid == int_servers[thread]) { + addr = get_property(node, "pervasive", NULL); + goto found; + } + } + } + + printk(KERN_WARNING "%s: CPU %d not found\n", __FUNCTION__, cpu); + return -EINVAL; + +found: + real_address = *(unsigned long*) addr; + addr += sizeof (unsigned long); + size = *(unsigned int*) addr; + + pr_debug("pervasive area for CPU %d at %lx, size %x\n", + cpu, real_address, size); + p->regs = __ioremap(real_address, size, _PAGE_NO_CACHE); + p->thread = thread; + return 0; +} + +void __init cell_pervasive_init(void) +{ + struct cbe_pervasive *p; + int cpu; + int ret; + + if (!cpu_has_feature(CPU_FTR_PAUSE_ZERO)) + return; + + for_each_cpu(cpu) { + p = &cbe_pervasive[cpu]; + ret = cbe_find_pmd_mmio(cpu, p); + if (ret) + return; + } + + ppc_md.idle_loop = cbe_idle; + ppc_md.system_reset_exception = cbe_system_reset_exception; +} diff --git a/arch/powerpc/platforms/cell/pervasive.h b/arch/powerpc/platforms/cell/pervasive.h new file mode 100644 index 0000000..da1fb85 --- /dev/null +++ b/arch/powerpc/platforms/cell/pervasive.h @@ -0,0 +1,62 @@ +/* + * Cell Pervasive Monitor and Debug interface and HW structures + * + * (C) Copyright IBM Corporation 2005 + * + * Authors: Maximino Aguilar (maguilar@us.ibm.com) + * David J. Erb (djerb@us.ibm.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + +#ifndef PERVASIVE_H +#define PERVASIVE_H + +struct pmd_regs { + u8 pad_0x0000_0x0800[0x0800 - 0x0000]; /* 0x0000 */ + + /* Thermal Sensor Registers */ + u64 ts_ctsr1; /* 0x0800 */ + u64 ts_ctsr2; /* 0x0808 */ + u64 ts_mtsr1; /* 0x0810 */ + u64 ts_mtsr2; /* 0x0818 */ + u64 ts_itr1; /* 0x0820 */ + u64 ts_itr2; /* 0x0828 */ + u64 ts_gitr; /* 0x0830 */ + u64 ts_isr; /* 0x0838 */ + u64 ts_imr; /* 0x0840 */ + u64 tm_cr1; /* 0x0848 */ + u64 tm_cr2; /* 0x0850 */ + u64 tm_simr; /* 0x0858 */ + u64 tm_tpr; /* 0x0860 */ + u64 tm_str1; /* 0x0868 */ + u64 tm_str2; /* 0x0870 */ + u64 tm_tsr; /* 0x0878 */ + + /* Power Management */ + u64 pm_control; /* 0x0880 */ +#define PMD_PAUSE_ZERO_CONTROL 0x10000 + u64 pm_status; /* 0x0888 */ + + /* Time Base Register */ + u64 tbr; /* 0x0890 */ + + u8 pad_0x0898_0x1000 [0x1000 - 0x0898]; /* 0x0898 */ +}; + +void __init cell_pervasive_init(void); + +#endif diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c index 9a49563..18e25e6 100644 --- a/arch/powerpc/platforms/cell/setup.c +++ b/arch/powerpc/platforms/cell/setup.c @@ -33,6 +33,7 @@ #include <asm/mmu.h> #include <asm/processor.h> #include <asm/io.h> +#include <asm/kexec.h> #include <asm/pgtable.h> #include <asm/prom.h> #include <asm/rtas.h> @@ -48,6 +49,7 @@ #include "interrupt.h" #include "iommu.h" +#include "pervasive.h" #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) @@ -67,6 +69,77 @@ void cell_show_cpuinfo(struct seq_file *m) of_node_put(root); } +#ifdef CONFIG_SPARSEMEM +static int __init find_spu_node_id(struct device_node *spe) +{ + unsigned int *id; +#ifdef CONFIG_NUMA + struct device_node *cpu; + cpu = spe->parent->parent; + id = (unsigned int *)get_property(cpu, "node-id", NULL); +#else + id = NULL; +#endif + return id ? *id : 0; +} + +static void __init cell_spuprop_present(struct device_node *spe, + const char *prop, int early) +{ + struct address_prop { + unsigned long address; + unsigned int len; + } __attribute__((packed)) *p; + int proplen; + + unsigned long start_pfn, end_pfn, pfn; + int node_id; + + p = (void*)get_property(spe, prop, &proplen); + WARN_ON(proplen != sizeof (*p)); + + node_id = find_spu_node_id(spe); + + start_pfn = p->address >> PAGE_SHIFT; + end_pfn = (p->address + p->len + PAGE_SIZE - 1) >> PAGE_SHIFT; + + /* We need to call memory_present *before* the call to sparse_init, + but we can initialize the page structs only *after* that call. + Thus, we're being called twice. */ + if (early) + memory_present(node_id, start_pfn, end_pfn); + else { + /* As the pages backing SPU LS and I/O are outside the range + of regular memory, their page structs were not initialized + by free_area_init. Do it here instead. */ + for (pfn = start_pfn; pfn < end_pfn; pfn++) { + struct page *page = pfn_to_page(pfn); + set_page_links(page, ZONE_DMA, node_id, pfn); + set_page_count(page, 1); + reset_page_mapcount(page); + SetPageReserved(page); + INIT_LIST_HEAD(&page->lru); + } + } +} + +static void __init cell_spumem_init(int early) +{ + struct device_node *node; + for (node = of_find_node_by_type(NULL, "spe"); + node; node = of_find_node_by_type(node, "spe")) { + cell_spuprop_present(node, "local-store", early); + cell_spuprop_present(node, "problem", early); + cell_spuprop_present(node, "priv1", early); + cell_spuprop_present(node, "priv2", early); + } +} +#else +static void __init cell_spumem_init(int early) +{ +} +#endif + static void cell_progress(char *s, unsigned short hex) { printk("*** %04x : %s\n", hex, s ? s : ""); @@ -93,11 +166,14 @@ static void __init cell_setup_arch(void) init_pci_config_tokens(); find_and_init_phbs(); spider_init_IRQ(); + cell_pervasive_init(); #ifdef CONFIG_DUMMY_CONSOLE conswitchp = &dummy_con; #endif mmio_nvram_init(); + + cell_spumem_init(0); } /* @@ -113,6 +189,8 @@ static void __init cell_init_early(void) ppc64_interrupt_controller = IC_CELL_PIC; + cell_spumem_init(1); + DBG(" <- cell_init_early()\n"); } @@ -125,6 +203,15 @@ static int __init cell_probe(int platform) return 1; } +/* + * Cell has no legacy IO; anything calling this function has to + * fail or bad things will happen + */ +static int cell_check_legacy_ioport(unsigned int baseport) +{ + return -ENODEV; +} + struct machdep_calls __initdata cell_md = { .probe = cell_probe, .setup_arch = cell_setup_arch, @@ -137,5 +224,11 @@ struct machdep_calls __initdata cell_md = { .get_rtc_time = rtas_get_rtc_time, .set_rtc_time = rtas_set_rtc_time, .calibrate_decr = generic_calibrate_decr, + .check_legacy_ioport = cell_check_legacy_ioport, .progress = cell_progress, +#ifdef CONFIG_KEXEC + .machine_kexec = default_machine_kexec, + .machine_kexec_prepare = default_machine_kexec_prepare, + .machine_crash_shutdown = default_machine_crash_shutdown, +#endif }; diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c new file mode 100644 index 0000000..d75ae03 --- /dev/null +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -0,0 +1,711 @@ +/* + * Low-level SPU handling + * + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 + * + * Author: Arnd Bergmann <arndb@de.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#undef DEBUG + +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/poll.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/wait.h> + +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/semaphore.h> +#include <asm/spu.h> +#include <asm/mmu_context.h> + +#include "interrupt.h" + +static int __spu_trap_invalid_dma(struct spu *spu) +{ + pr_debug("%s\n", __FUNCTION__); + force_sig(SIGBUS, /* info, */ current); + return 0; +} + +static int __spu_trap_dma_align(struct spu *spu) +{ + pr_debug("%s\n", __FUNCTION__); + force_sig(SIGBUS, /* info, */ current); + return 0; +} + +static int __spu_trap_error(struct spu *spu) +{ + pr_debug("%s\n", __FUNCTION__); + force_sig(SIGILL, /* info, */ current); + return 0; +} + +static void spu_restart_dma(struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + if (!test_bit(SPU_CONTEXT_SWITCH_PENDING, &spu->flags)) + out_be64(&priv2->mfc_control_RW, MFC_CNTL_RESTART_DMA_COMMAND); +} + +static int __spu_trap_data_seg(struct spu *spu, unsigned long ea) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + struct mm_struct *mm = spu->mm; + u64 esid, vsid; + + pr_debug("%s\n", __FUNCTION__); + + if (test_bit(SPU_CONTEXT_SWITCH_ACTIVE, &spu->flags)) { + /* SLBs are pre-loaded for context switch, so + * we should never get here! + */ + printk("%s: invalid access during switch!\n", __func__); + return 1; + } + if (!mm || (REGION_ID(ea) != USER_REGION_ID)) { + /* Future: support kernel segments so that drivers + * can use SPUs. + */ + pr_debug("invalid region access at %016lx\n", ea); + return 1; + } + + esid = (ea & ESID_MASK) | SLB_ESID_V; + vsid = (get_vsid(mm->context.id, ea) << SLB_VSID_SHIFT) | SLB_VSID_USER; + if (in_hugepage_area(mm->context, ea)) + vsid |= SLB_VSID_L; + + out_be64(&priv2->slb_index_W, spu->slb_replace); + out_be64(&priv2->slb_vsid_RW, vsid); + out_be64(&priv2->slb_esid_RW, esid); + + spu->slb_replace++; + if (spu->slb_replace >= 8) + spu->slb_replace = 0; + + spu_restart_dma(spu); + + return 0; +} + +extern int hash_page(unsigned long ea, unsigned long access, unsigned long trap); //XXX +static int __spu_trap_data_map(struct spu *spu, unsigned long ea, u64 dsisr) +{ + pr_debug("%s\n", __FUNCTION__); + + /* Handle kernel space hash faults immediately. + User hash faults need to be deferred to process context. */ + if ((dsisr & MFC_DSISR_PTE_NOT_FOUND) + && REGION_ID(ea) != USER_REGION_ID + && hash_page(ea, _PAGE_PRESENT, 0x300) == 0) { + spu_restart_dma(spu); + return 0; + } + + if (test_bit(SPU_CONTEXT_SWITCH_ACTIVE, &spu->flags)) { + printk("%s: invalid access during switch!\n", __func__); + return 1; + } + + spu->dar = ea; + spu->dsisr = dsisr; + mb(); + if (spu->stop_callback) + spu->stop_callback(spu); + return 0; +} + +static int __spu_trap_mailbox(struct spu *spu) +{ + if (spu->ibox_callback) + spu->ibox_callback(spu); + + /* atomically disable SPU mailbox interrupts */ + spin_lock(&spu->register_lock); + spu_int_mask_and(spu, 2, ~0x1); + spin_unlock(&spu->register_lock); + return 0; +} + +static int __spu_trap_stop(struct spu *spu) +{ + pr_debug("%s\n", __FUNCTION__); + spu->stop_code = in_be32(&spu->problem->spu_status_R); + if (spu->stop_callback) + spu->stop_callback(spu); + return 0; +} + +static int __spu_trap_halt(struct spu *spu) +{ + pr_debug("%s\n", __FUNCTION__); + spu->stop_code = in_be32(&spu->problem->spu_status_R); + if (spu->stop_callback) + spu->stop_callback(spu); + return 0; +} + +static int __spu_trap_tag_group(struct spu *spu) +{ + pr_debug("%s\n", __FUNCTION__); + /* wake_up(&spu->dma_wq); */ + return 0; +} + +static int __spu_trap_spubox(struct spu *spu) +{ + if (spu->wbox_callback) + spu->wbox_callback(spu); + + /* atomically disable SPU mailbox interrupts */ + spin_lock(&spu->register_lock); + spu_int_mask_and(spu, 2, ~0x10); + spin_unlock(&spu->register_lock); + return 0; +} + +static irqreturn_t +spu_irq_class_0(int irq, void *data, struct pt_regs *regs) +{ + struct spu *spu; + + spu = data; + spu->class_0_pending = 1; + if (spu->stop_callback) + spu->stop_callback(spu); + + return IRQ_HANDLED; +} + +int +spu_irq_class_0_bottom(struct spu *spu) +{ + unsigned long stat, mask; + + spu->class_0_pending = 0; + + mask = spu_int_mask_get(spu, 0); + stat = spu_int_stat_get(spu, 0); + + stat &= mask; + + if (stat & 1) /* invalid MFC DMA */ + __spu_trap_invalid_dma(spu); + + if (stat & 2) /* invalid DMA alignment */ + __spu_trap_dma_align(spu); + + if (stat & 4) /* error on SPU */ + __spu_trap_error(spu); + + spu_int_stat_clear(spu, 0, stat); + + return (stat & 0x7) ? -EIO : 0; +} +EXPORT_SYMBOL_GPL(spu_irq_class_0_bottom); + +static irqreturn_t +spu_irq_class_1(int irq, void *data, struct pt_regs *regs) +{ + struct spu *spu; + unsigned long stat, mask, dar, dsisr; + + spu = data; + + /* atomically read & clear class1 status. */ + spin_lock(&spu->register_lock); + mask = spu_int_mask_get(spu, 1); + stat = spu_int_stat_get(spu, 1) & mask; + dar = spu_mfc_dar_get(spu); + dsisr = spu_mfc_dsisr_get(spu); + if (stat & 2) /* mapping fault */ + spu_mfc_dsisr_set(spu, 0ul); + spu_int_stat_clear(spu, 1, stat); + spin_unlock(&spu->register_lock); + + if (stat & 1) /* segment fault */ + __spu_trap_data_seg(spu, dar); + + if (stat & 2) { /* mapping fault */ + __spu_trap_data_map(spu, dar, dsisr); + } + + if (stat & 4) /* ls compare & suspend on get */ + ; + + if (stat & 8) /* ls compare & suspend on put */ + ; + + return stat ? IRQ_HANDLED : IRQ_NONE; +} +EXPORT_SYMBOL_GPL(spu_irq_class_1_bottom); + +static irqreturn_t +spu_irq_class_2(int irq, void *data, struct pt_regs *regs) +{ + struct spu *spu; + unsigned long stat; + unsigned long mask; + + spu = data; + stat = spu_int_stat_get(spu, 2); + mask = spu_int_mask_get(spu, 2); + + pr_debug("class 2 interrupt %d, %lx, %lx\n", irq, stat, mask); + + stat &= mask; + + if (stat & 1) /* PPC core mailbox */ + __spu_trap_mailbox(spu); + + if (stat & 2) /* SPU stop-and-signal */ + __spu_trap_stop(spu); + + if (stat & 4) /* SPU halted */ + __spu_trap_halt(spu); + + if (stat & 8) /* DMA tag group complete */ + __spu_trap_tag_group(spu); + + if (stat & 0x10) /* SPU mailbox threshold */ + __spu_trap_spubox(spu); + + spu_int_stat_clear(spu, 2, stat); + return stat ? IRQ_HANDLED : IRQ_NONE; +} + +static int +spu_request_irqs(struct spu *spu) +{ + int ret; + int irq_base; + + irq_base = IIC_NODE_STRIDE * spu->node + IIC_SPE_OFFSET; + + snprintf(spu->irq_c0, sizeof (spu->irq_c0), "spe%02d.0", spu->number); + ret = request_irq(irq_base + spu->isrc, + spu_irq_class_0, 0, spu->irq_c0, spu); + if (ret) + goto out; + + snprintf(spu->irq_c1, sizeof (spu->irq_c1), "spe%02d.1", spu->number); + ret = request_irq(irq_base + IIC_CLASS_STRIDE + spu->isrc, + spu_irq_class_1, 0, spu->irq_c1, spu); + if (ret) + goto out1; + + snprintf(spu->irq_c2, sizeof (spu->irq_c2), "spe%02d.2", spu->number); + ret = request_irq(irq_base + 2*IIC_CLASS_STRIDE + spu->isrc, + spu_irq_class_2, 0, spu->irq_c2, spu); + if (ret) + goto out2; + goto out; + +out2: + free_irq(irq_base + IIC_CLASS_STRIDE + spu->isrc, spu); +out1: + free_irq(irq_base + spu->isrc, spu); +out: + return ret; +} + +static void +spu_free_irqs(struct spu *spu) +{ + int irq_base; + + irq_base = IIC_NODE_STRIDE * spu->node + IIC_SPE_OFFSET; + + free_irq(irq_base + spu->isrc, spu); + free_irq(irq_base + IIC_CLASS_STRIDE + spu->isrc, spu); + free_irq(irq_base + 2*IIC_CLASS_STRIDE + spu->isrc, spu); +} + +static LIST_HEAD(spu_list); +static DECLARE_MUTEX(spu_mutex); + +static void spu_init_channels(struct spu *spu) +{ + static const struct { + unsigned channel; + unsigned count; + } zero_list[] = { + { 0x00, 1, }, { 0x01, 1, }, { 0x03, 1, }, { 0x04, 1, }, + { 0x18, 1, }, { 0x19, 1, }, { 0x1b, 1, }, { 0x1d, 1, }, + }, count_list[] = { + { 0x00, 0, }, { 0x03, 0, }, { 0x04, 0, }, { 0x15, 16, }, + { 0x17, 1, }, { 0x18, 0, }, { 0x19, 0, }, { 0x1b, 0, }, + { 0x1c, 1, }, { 0x1d, 0, }, { 0x1e, 1, }, + }; + struct spu_priv2 __iomem *priv2; + int i; + + priv2 = spu->priv2; + + /* initialize all channel data to zero */ + for (i = 0; i < ARRAY_SIZE(zero_list); i++) { + int count; + + out_be64(&priv2->spu_chnlcntptr_RW, zero_list[i].channel); + for (count = 0; count < zero_list[i].count; count++) + out_be64(&priv2->spu_chnldata_RW, 0); + } + + /* initialize channel counts to meaningful values */ + for (i = 0; i < ARRAY_SIZE(count_list); i++) { + out_be64(&priv2->spu_chnlcntptr_RW, count_list[i].channel); + out_be64(&priv2->spu_chnlcnt_RW, count_list[i].count); + } +} + +struct spu *spu_alloc(void) +{ + struct spu *spu; + + down(&spu_mutex); + if (!list_empty(&spu_list)) { + spu = list_entry(spu_list.next, struct spu, list); + list_del_init(&spu->list); + pr_debug("Got SPU %x %d\n", spu->isrc, spu->number); + } else { + pr_debug("No SPU left\n"); + spu = NULL; + } + up(&spu_mutex); + + if (spu) + spu_init_channels(spu); + + return spu; +} +EXPORT_SYMBOL_GPL(spu_alloc); + +void spu_free(struct spu *spu) +{ + down(&spu_mutex); + list_add_tail(&spu->list, &spu_list); + up(&spu_mutex); +} +EXPORT_SYMBOL_GPL(spu_free); + +static int spu_handle_mm_fault(struct spu *spu) +{ + struct mm_struct *mm = spu->mm; + struct vm_area_struct *vma; + u64 ea, dsisr, is_write; + int ret; + + ea = spu->dar; + dsisr = spu->dsisr; +#if 0 + if (!IS_VALID_EA(ea)) { + return -EFAULT; + } +#endif /* XXX */ + if (mm == NULL) { + return -EFAULT; + } + if (mm->pgd == NULL) { + return -EFAULT; + } + + down_read(&mm->mmap_sem); + vma = find_vma(mm, ea); + if (!vma) + goto bad_area; + if (vma->vm_start <= ea) + goto good_area; + if (!(vma->vm_flags & VM_GROWSDOWN)) + goto bad_area; +#if 0 + if (expand_stack(vma, ea)) + goto bad_area; +#endif /* XXX */ +good_area: + is_write = dsisr & MFC_DSISR_ACCESS_PUT; + if (is_write) { + if (!(vma->vm_flags & VM_WRITE)) + goto bad_area; + } else { + if (dsisr & MFC_DSISR_ACCESS_DENIED) + goto bad_area; + if (!(vma->vm_flags & (VM_READ | VM_EXEC))) + goto bad_area; + } + ret = 0; + switch (handle_mm_fault(mm, vma, ea, is_write)) { + case VM_FAULT_MINOR: + current->min_flt++; + break; + case VM_FAULT_MAJOR: + current->maj_flt++; + break; + case VM_FAULT_SIGBUS: + ret = -EFAULT; + goto bad_area; + case VM_FAULT_OOM: + ret = -ENOMEM; + goto bad_area; + default: + BUG(); + } + up_read(&mm->mmap_sem); + return ret; + +bad_area: + up_read(&mm->mmap_sem); + return -EFAULT; +} + +int spu_irq_class_1_bottom(struct spu *spu) +{ + u64 ea, dsisr, access, error = 0UL; + int ret = 0; + + ea = spu->dar; + dsisr = spu->dsisr; + if (dsisr & MFC_DSISR_PTE_NOT_FOUND) { + access = (_PAGE_PRESENT | _PAGE_USER); + access |= (dsisr & MFC_DSISR_ACCESS_PUT) ? _PAGE_RW : 0UL; + if (hash_page(ea, access, 0x300) != 0) + error |= CLASS1_ENABLE_STORAGE_FAULT_INTR; + } + if ((error & CLASS1_ENABLE_STORAGE_FAULT_INTR) || + (dsisr & MFC_DSISR_ACCESS_DENIED)) { + if ((ret = spu_handle_mm_fault(spu)) != 0) + error |= CLASS1_ENABLE_STORAGE_FAULT_INTR; + else + error &= ~CLASS1_ENABLE_STORAGE_FAULT_INTR; + } + spu->dar = 0UL; + spu->dsisr = 0UL; + if (!error) { + spu_restart_dma(spu); + } else { + __spu_trap_invalid_dma(spu); + } + return ret; +} + +void spu_irq_setaffinity(struct spu *spu, int cpu) +{ + u64 target = iic_get_target_id(cpu); + u64 route = target << 48 | target << 32 | target << 16; + spu_int_route_set(spu, route); +} +EXPORT_SYMBOL_GPL(spu_irq_setaffinity); + +static void __iomem * __init map_spe_prop(struct device_node *n, + const char *name) +{ + struct address_prop { + unsigned long address; + unsigned int len; + } __attribute__((packed)) *prop; + + void *p; + int proplen; + + p = get_property(n, name, &proplen); + if (proplen != sizeof (struct address_prop)) + return NULL; + + prop = p; + + return ioremap(prop->address, prop->len); +} + +static void spu_unmap(struct spu *spu) +{ + iounmap(spu->priv2); + iounmap(spu->priv1); + iounmap(spu->problem); + iounmap((u8 __iomem *)spu->local_store); +} + +static int __init spu_map_device(struct spu *spu, struct device_node *spe) +{ + char *prop; + int ret; + + ret = -ENODEV; + prop = get_property(spe, "isrc", NULL); + if (!prop) + goto out; + spu->isrc = *(unsigned int *)prop; + + spu->name = get_property(spe, "name", NULL); + if (!spu->name) + goto out; + + prop = get_property(spe, "local-store", NULL); + if (!prop) + goto out; + spu->local_store_phys = *(unsigned long *)prop; + + /* we use local store as ram, not io memory */ + spu->local_store = (void __force *)map_spe_prop(spe, "local-store"); + if (!spu->local_store) + goto out; + + spu->problem= map_spe_prop(spe, "problem"); + if (!spu->problem) + goto out_unmap; + + spu->priv1= map_spe_prop(spe, "priv1"); + /* priv1 is not available on a hypervisor */ + + spu->priv2= map_spe_prop(spe, "priv2"); + if (!spu->priv2) + goto out_unmap; + ret = 0; + goto out; + +out_unmap: + spu_unmap(spu); +out: + return ret; +} + +static int __init find_spu_node_id(struct device_node *spe) +{ + unsigned int *id; + struct device_node *cpu; + + cpu = spe->parent->parent; + id = (unsigned int *)get_property(cpu, "node-id", NULL); + + return id ? *id : 0; +} + +static int __init create_spu(struct device_node *spe) +{ + struct spu *spu; + int ret; + static int number; + + ret = -ENOMEM; + spu = kmalloc(sizeof (*spu), GFP_KERNEL); + if (!spu) + goto out; + + ret = spu_map_device(spu, spe); + if (ret) + goto out_free; + + spu->node = find_spu_node_id(spe); + spu->stop_code = 0; + spu->slb_replace = 0; + spu->mm = NULL; + spu->ctx = NULL; + spu->rq = NULL; + spu->pid = 0; + spu->class_0_pending = 0; + spu->flags = 0UL; + spu->dar = 0UL; + spu->dsisr = 0UL; + spin_lock_init(&spu->register_lock); + + spu_mfc_sdr_set(spu, mfspr(SPRN_SDR1)); + spu_mfc_sr1_set(spu, 0x33); + + spu->ibox_callback = NULL; + spu->wbox_callback = NULL; + spu->stop_callback = NULL; + + down(&spu_mutex); + spu->number = number++; + ret = spu_request_irqs(spu); + if (ret) + goto out_unmap; + + list_add(&spu->list, &spu_list); + up(&spu_mutex); + + pr_debug(KERN_DEBUG "Using SPE %s %02x %p %p %p %p %d\n", + spu->name, spu->isrc, spu->local_store, + spu->problem, spu->priv1, spu->priv2, spu->number); + goto out; + +out_unmap: + up(&spu_mutex); + spu_unmap(spu); +out_free: + kfree(spu); +out: + return ret; +} + +static void destroy_spu(struct spu *spu) +{ + list_del_init(&spu->list); + + spu_free_irqs(spu); + spu_unmap(spu); + kfree(spu); +} + +static void cleanup_spu_base(void) +{ + struct spu *spu, *tmp; + down(&spu_mutex); + list_for_each_entry_safe(spu, tmp, &spu_list, list) + destroy_spu(spu); + up(&spu_mutex); +} +module_exit(cleanup_spu_base); + +static int __init init_spu_base(void) +{ + struct device_node *node; + int ret; + + ret = -ENODEV; + for (node = of_find_node_by_type(NULL, "spe"); + node; node = of_find_node_by_type(node, "spe")) { + ret = create_spu(node); + if (ret) { + printk(KERN_WARNING "%s: Error initializing %s\n", + __FUNCTION__, node->name); + cleanup_spu_base(); + break; + } + } + /* in some old firmware versions, the spe is called 'spc', so we + look for that as well */ + for (node = of_find_node_by_type(NULL, "spc"); + node; node = of_find_node_by_type(node, "spc")) { + ret = create_spu(node); + if (ret) { + printk(KERN_WARNING "%s: Error initializing %s\n", + __FUNCTION__, node->name); + cleanup_spu_base(); + break; + } + } + return ret; +} +module_init(init_spu_base); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Arnd Bergmann <arndb@de.ibm.com>"); diff --git a/arch/powerpc/platforms/cell/spu_priv1.c b/arch/powerpc/platforms/cell/spu_priv1.c new file mode 100644 index 0000000..b265642 --- /dev/null +++ b/arch/powerpc/platforms/cell/spu_priv1.c @@ -0,0 +1,133 @@ +/* + * access to SPU privileged registers + */ +#include <linux/module.h> + +#include <asm/io.h> +#include <asm/spu.h> + +void spu_int_mask_and(struct spu *spu, int class, u64 mask) +{ + u64 old_mask; + + old_mask = in_be64(&spu->priv1->int_mask_RW[class]); + out_be64(&spu->priv1->int_mask_RW[class], old_mask & mask); +} +EXPORT_SYMBOL_GPL(spu_int_mask_and); + +void spu_int_mask_or(struct spu *spu, int class, u64 mask) +{ + u64 old_mask; + + old_mask = in_be64(&spu->priv1->int_mask_RW[class]); + out_be64(&spu->priv1->int_mask_RW[class], old_mask | mask); +} +EXPORT_SYMBOL_GPL(spu_int_mask_or); + +void spu_int_mask_set(struct spu *spu, int class, u64 mask) +{ + out_be64(&spu->priv1->int_mask_RW[class], mask); +} +EXPORT_SYMBOL_GPL(spu_int_mask_set); + +u64 spu_int_mask_get(struct spu *spu, int class) +{ + return in_be64(&spu->priv1->int_mask_RW[class]); +} +EXPORT_SYMBOL_GPL(spu_int_mask_get); + +void spu_int_stat_clear(struct spu *spu, int class, u64 stat) +{ + out_be64(&spu->priv1->int_stat_RW[class], stat); +} +EXPORT_SYMBOL_GPL(spu_int_stat_clear); + +u64 spu_int_stat_get(struct spu *spu, int class) +{ + return in_be64(&spu->priv1->int_stat_RW[class]); +} +EXPORT_SYMBOL_GPL(spu_int_stat_get); + +void spu_int_route_set(struct spu *spu, u64 route) +{ + out_be64(&spu->priv1->int_route_RW, route); +} +EXPORT_SYMBOL_GPL(spu_int_route_set); + +u64 spu_mfc_dar_get(struct spu *spu) +{ + return in_be64(&spu->priv1->mfc_dar_RW); +} +EXPORT_SYMBOL_GPL(spu_mfc_dar_get); + +u64 spu_mfc_dsisr_get(struct spu *spu) +{ + return in_be64(&spu->priv1->mfc_dsisr_RW); +} +EXPORT_SYMBOL_GPL(spu_mfc_dsisr_get); + +void spu_mfc_dsisr_set(struct spu *spu, u64 dsisr) +{ + out_be64(&spu->priv1->mfc_dsisr_RW, dsisr); +} +EXPORT_SYMBOL_GPL(spu_mfc_dsisr_set); + +void spu_mfc_sdr_set(struct spu *spu, u64 sdr) +{ + out_be64(&spu->priv1->mfc_sdr_RW, sdr); +} +EXPORT_SYMBOL_GPL(spu_mfc_sdr_set); + +void spu_mfc_sr1_set(struct spu *spu, u64 sr1) +{ + out_be64(&spu->priv1->mfc_sr1_RW, sr1); +} +EXPORT_SYMBOL_GPL(spu_mfc_sr1_set); + +u64 spu_mfc_sr1_get(struct spu *spu) +{ + return in_be64(&spu->priv1->mfc_sr1_RW); +} +EXPORT_SYMBOL_GPL(spu_mfc_sr1_get); + +void spu_mfc_tclass_id_set(struct spu *spu, u64 tclass_id) +{ + out_be64(&spu->priv1->mfc_tclass_id_RW, tclass_id); +} +EXPORT_SYMBOL_GPL(spu_mfc_tclass_id_set); + +u64 spu_mfc_tclass_id_get(struct spu *spu) +{ + return in_be64(&spu->priv1->mfc_tclass_id_RW); +} +EXPORT_SYMBOL_GPL(spu_mfc_tclass_id_get); + +void spu_tlb_invalidate(struct spu *spu) +{ + out_be64(&spu->priv1->tlb_invalidate_entry_W, 0ul); +} +EXPORT_SYMBOL_GPL(spu_tlb_invalidate); + +void spu_resource_allocation_groupID_set(struct spu *spu, u64 id) +{ + out_be64(&spu->priv1->resource_allocation_groupID_RW, id); +} +EXPORT_SYMBOL_GPL(spu_resource_allocation_groupID_set); + +u64 spu_resource_allocation_groupID_get(struct spu *spu) +{ + return in_be64(&spu->priv1->resource_allocation_groupID_RW); +} +EXPORT_SYMBOL_GPL(spu_resource_allocation_groupID_get); + +void spu_resource_allocation_enable_set(struct spu *spu, u64 enable) +{ + out_be64(&spu->priv1->resource_allocation_enable_RW, enable); +} +EXPORT_SYMBOL_GPL(spu_resource_allocation_enable_set); + +u64 spu_resource_allocation_enable_get(struct spu *spu) +{ + return in_be64(&spu->priv1->resource_allocation_enable_RW); +} +EXPORT_SYMBOL_GPL(spu_resource_allocation_enable_get); diff --git a/arch/powerpc/platforms/cell/spu_syscalls.c b/arch/powerpc/platforms/cell/spu_syscalls.c new file mode 100644 index 0000000..261b507 --- /dev/null +++ b/arch/powerpc/platforms/cell/spu_syscalls.c @@ -0,0 +1,88 @@ +/* + * SPU file system -- system call stubs + * + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 + * + * Author: Arnd Bergmann <arndb@de.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include <linux/file.h> +#include <linux/module.h> +#include <linux/syscalls.h> + +#include <asm/spu.h> + +struct spufs_calls spufs_calls = { + .owner = NULL, +}; + +/* These stub syscalls are needed to have the actual implementation + * within a loadable module. When spufs is built into the kernel, + * this file is not used and the syscalls directly enter the fs code */ + +asmlinkage long sys_spu_create(const char __user *name, + unsigned int flags, mode_t mode) +{ + long ret; + struct module *owner = spufs_calls.owner; + + ret = -ENOSYS; + if (owner && try_module_get(owner)) { + ret = spufs_calls.create_thread(name, flags, mode); + module_put(owner); + } + return ret; +} + +asmlinkage long sys_spu_run(int fd, __u32 __user *unpc, __u32 __user *ustatus) +{ + long ret; + struct file *filp; + int fput_needed; + struct module *owner = spufs_calls.owner; + + ret = -ENOSYS; + if (owner && try_module_get(owner)) { + ret = -EBADF; + filp = fget_light(fd, &fput_needed); + if (filp) { + ret = spufs_calls.spu_run(filp, unpc, ustatus); + fput_light(filp, fput_needed); + } + module_put(owner); + } + return ret; +} + +int register_spu_syscalls(struct spufs_calls *calls) +{ + if (spufs_calls.owner) + return -EBUSY; + + spufs_calls.create_thread = calls->create_thread; + spufs_calls.spu_run = calls->spu_run; + smp_mb(); + spufs_calls.owner = calls->owner; + return 0; +} +EXPORT_SYMBOL_GPL(register_spu_syscalls); + +void unregister_spu_syscalls(struct spufs_calls *calls) +{ + BUG_ON(spufs_calls.owner != calls->owner); + spufs_calls.owner = NULL; +} +EXPORT_SYMBOL_GPL(unregister_spu_syscalls); diff --git a/arch/powerpc/platforms/cell/spufs/Makefile b/arch/powerpc/platforms/cell/spufs/Makefile new file mode 100644 index 0000000..a7cddf4 --- /dev/null +++ b/arch/powerpc/platforms/cell/spufs/Makefile @@ -0,0 +1,54 @@ +obj-$(CONFIG_SPU_FS) += spufs.o +spufs-y += inode.o file.o context.o switch.o syscalls.o +spufs-y += sched.o backing_ops.o hw_ops.o run.o + +# Rules to build switch.o with the help of SPU tool chain +SPU_CROSS := spu- +SPU_CC := $(SPU_CROSS)gcc +SPU_AS := $(SPU_CROSS)gcc +SPU_LD := $(SPU_CROSS)ld +SPU_OBJCOPY := $(SPU_CROSS)objcopy +SPU_CFLAGS := -O2 -Wall -I$(srctree)/include -I$(objtree)/include2 +SPU_AFLAGS := -c -D__ASSEMBLY__ -I$(srctree)/include -I$(objtree)/include2 +SPU_LDFLAGS := -N -Ttext=0x0 + +$(obj)/switch.o: $(obj)/spu_save_dump.h $(obj)/spu_restore_dump.h + +# Compile SPU files + cmd_spu_cc = $(SPU_CC) $(SPU_CFLAGS) -c -o $@ $< +quiet_cmd_spu_cc = SPU_CC $@ +$(obj)/spu_%.o: $(src)/spu_%.c + $(call if_changed,spu_cc) + +# Assemble SPU files + cmd_spu_as = $(SPU_AS) $(SPU_AFLAGS) -o $@ $< +quiet_cmd_spu_as = SPU_AS $@ +$(obj)/spu_%.o: $(src)/spu_%.S + $(call if_changed,spu_as) + +# Link SPU Executables + cmd_spu_ld = $(SPU_LD) $(SPU_LDFLAGS) -o $@ $^ +quiet_cmd_spu_ld = SPU_LD $@ +$(obj)/spu_%: $(obj)/spu_%_crt0.o $(obj)/spu_%.o + $(call if_changed,spu_ld) + +# Copy into binary format + cmd_spu_objcopy = $(SPU_OBJCOPY) -O binary $< $@ +quiet_cmd_spu_objcopy = OBJCOPY $@ +$(obj)/spu_%.bin: $(src)/spu_% + $(call if_changed,spu_objcopy) + +# create C code from ELF executable +cmd_hexdump = ( \ + echo "/*" ; \ + echo " * $*_dump.h: Copyright (C) 2005 IBM." ; \ + echo " * Hex-dump auto generated from $*.c." ; \ + echo " * Do not edit!" ; \ + echo " */" ; \ + echo "static unsigned int $*_code[] __page_aligned = {" ; \ + hexdump -v -e '"0x" 4/1 "%02x" "," "\n"' $< ; \ + echo "};" ; \ + ) > $@ +quiet_cmd_hexdump = HEXDUMP $@ +$(obj)/%_dump.h: $(obj)/%.bin + $(call if_changed,hexdump) diff --git a/arch/powerpc/platforms/cell/spufs/backing_ops.c b/arch/powerpc/platforms/cell/spufs/backing_ops.c new file mode 100644 index 0000000..a5c489a5 --- /dev/null +++ b/arch/powerpc/platforms/cell/spufs/backing_ops.c @@ -0,0 +1,308 @@ +/* backing_ops.c - query/set operations on saved SPU context. + * + * Copyright (C) IBM 2005 + * Author: Mark Nutter <mnutter@us.ibm.com> + * + * These register operations allow SPUFS to operate on saved + * SPU contexts rather than hardware. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/vmalloc.h> +#include <linux/smp.h> +#include <linux/smp_lock.h> +#include <linux/stddef.h> +#include <linux/unistd.h> +#include <linux/poll.h> + +#include <asm/io.h> +#include <asm/spu.h> +#include <asm/spu_csa.h> +#include <asm/mmu_context.h> +#include "spufs.h" + +/* + * Reads/writes to various problem and priv2 registers require + * state changes, i.e. generate SPU events, modify channel + * counts, etc. + */ + +static void gen_spu_event(struct spu_context *ctx, u32 event) +{ + u64 ch0_cnt; + u64 ch0_data; + u64 ch1_data; + + ch0_cnt = ctx->csa.spu_chnlcnt_RW[0]; + ch0_data = ctx->csa.spu_chnldata_RW[0]; + ch1_data = ctx->csa.spu_chnldata_RW[1]; + ctx->csa.spu_chnldata_RW[0] |= event; + if ((ch0_cnt == 0) && !(ch0_data & event) && (ch1_data & event)) { + ctx->csa.spu_chnlcnt_RW[0] = 1; + } +} + +static int spu_backing_mbox_read(struct spu_context *ctx, u32 * data) +{ + u32 mbox_stat; + int ret = 0; + + spin_lock(&ctx->csa.register_lock); + mbox_stat = ctx->csa.prob.mb_stat_R; + if (mbox_stat & 0x0000ff) { + /* Read the first available word. + * Implementation note: the depth + * of pu_mb_R is currently 1. + */ + *data = ctx->csa.prob.pu_mb_R; + ctx->csa.prob.mb_stat_R &= ~(0x0000ff); + ctx->csa.spu_chnlcnt_RW[28] = 1; + gen_spu_event(ctx, MFC_PU_MAILBOX_AVAILABLE_EVENT); + ret = 4; + } + spin_unlock(&ctx->csa.register_lock); + return ret; +} + +static u32 spu_backing_mbox_stat_read(struct spu_context *ctx) +{ + return ctx->csa.prob.mb_stat_R; +} + +static unsigned int spu_backing_mbox_stat_poll(struct spu_context *ctx, + unsigned int events) +{ + int ret; + u32 stat; + + ret = 0; + spin_lock_irq(&ctx->csa.register_lock); + stat = ctx->csa.prob.mb_stat_R; + + /* if the requested event is there, return the poll + mask, otherwise enable the interrupt to get notified, + but first mark any pending interrupts as done so + we don't get woken up unnecessarily */ + + if (events & (POLLIN | POLLRDNORM)) { + if (stat & 0xff0000) + ret |= POLLIN | POLLRDNORM; + else { + ctx->csa.priv1.int_stat_class0_RW &= ~0x1; + ctx->csa.priv1.int_mask_class2_RW |= 0x1; + } + } + if (events & (POLLOUT | POLLWRNORM)) { + if (stat & 0x00ff00) + ret = POLLOUT | POLLWRNORM; + else { + ctx->csa.priv1.int_stat_class0_RW &= ~0x10; + ctx->csa.priv1.int_mask_class2_RW |= 0x10; + } + } + spin_unlock_irq(&ctx->csa.register_lock); + return ret; +} + +static int spu_backing_ibox_read(struct spu_context *ctx, u32 * data) +{ + int ret; + + spin_lock(&ctx->csa.register_lock); + if (ctx->csa.prob.mb_stat_R & 0xff0000) { + /* Read the first available word. + * Implementation note: the depth + * of puint_mb_R is currently 1. + */ + *data = ctx->csa.priv2.puint_mb_R; + ctx->csa.prob.mb_stat_R &= ~(0xff0000); + ctx->csa.spu_chnlcnt_RW[30] = 1; + gen_spu_event(ctx, MFC_PU_INT_MAILBOX_AVAILABLE_EVENT); + ret = 4; + } else { + /* make sure we get woken up by the interrupt */ + ctx->csa.priv1.int_mask_class2_RW |= 0x1UL; + ret = 0; + } + spin_unlock(&ctx->csa.register_lock); + return ret; +} + +static int spu_backing_wbox_write(struct spu_context *ctx, u32 data) +{ + int ret; + + spin_lock(&ctx->csa.register_lock); + if ((ctx->csa.prob.mb_stat_R) & 0x00ff00) { + int slot = ctx->csa.spu_chnlcnt_RW[29]; + int avail = (ctx->csa.prob.mb_stat_R & 0x00ff00) >> 8; + + /* We have space to write wbox_data. + * Implementation note: the depth + * of spu_mb_W is currently 4. + */ + BUG_ON(avail != (4 - slot)); + ctx->csa.spu_mailbox_data[slot] = data; + ctx->csa.spu_chnlcnt_RW[29] = ++slot; + ctx->csa.prob.mb_stat_R = (((4 - slot) & 0xff) << 8); + gen_spu_event(ctx, MFC_SPU_MAILBOX_WRITTEN_EVENT); + ret = 4; + } else { + /* make sure we get woken up by the interrupt when space + becomes available */ + ctx->csa.priv1.int_mask_class2_RW |= 0x10; + ret = 0; + } + spin_unlock(&ctx->csa.register_lock); + return ret; +} + +static u32 spu_backing_signal1_read(struct spu_context *ctx) +{ + return ctx->csa.spu_chnldata_RW[3]; +} + +static void spu_backing_signal1_write(struct spu_context *ctx, u32 data) +{ + spin_lock(&ctx->csa.register_lock); + if (ctx->csa.priv2.spu_cfg_RW & 0x1) + ctx->csa.spu_chnldata_RW[3] |= data; + else + ctx->csa.spu_chnldata_RW[3] = data; + ctx->csa.spu_chnlcnt_RW[3] = 1; + gen_spu_event(ctx, MFC_SIGNAL_1_EVENT); + spin_unlock(&ctx->csa.register_lock); +} + +static u32 spu_backing_signal2_read(struct spu_context *ctx) +{ + return ctx->csa.spu_chnldata_RW[4]; +} + +static void spu_backing_signal2_write(struct spu_context *ctx, u32 data) +{ + spin_lock(&ctx->csa.register_lock); + if (ctx->csa.priv2.spu_cfg_RW & 0x2) + ctx->csa.spu_chnldata_RW[4] |= data; + else + ctx->csa.spu_chnldata_RW[4] = data; + ctx->csa.spu_chnlcnt_RW[4] = 1; + gen_spu_event(ctx, MFC_SIGNAL_2_EVENT); + spin_unlock(&ctx->csa.register_lock); +} + +static void spu_backing_signal1_type_set(struct spu_context *ctx, u64 val) +{ + u64 tmp; + + spin_lock(&ctx->csa.register_lock); + tmp = ctx->csa.priv2.spu_cfg_RW; + if (val) + tmp |= 1; + else + tmp &= ~1; + ctx->csa.priv2.spu_cfg_RW = tmp; + spin_unlock(&ctx->csa.register_lock); +} + +static u64 spu_backing_signal1_type_get(struct spu_context *ctx) +{ + return ((ctx->csa.priv2.spu_cfg_RW & 1) != 0); +} + +static void spu_backing_signal2_type_set(struct spu_context *ctx, u64 val) +{ + u64 tmp; + + spin_lock(&ctx->csa.register_lock); + tmp = ctx->csa.priv2.spu_cfg_RW; + if (val) + tmp |= 2; + else + tmp &= ~2; + ctx->csa.priv2.spu_cfg_RW = tmp; + spin_unlock(&ctx->csa.register_lock); +} + +static u64 spu_backing_signal2_type_get(struct spu_context *ctx) +{ + return ((ctx->csa.priv2.spu_cfg_RW & 2) != 0); +} + +static u32 spu_backing_npc_read(struct spu_context *ctx) +{ + return ctx->csa.prob.spu_npc_RW; +} + +static void spu_backing_npc_write(struct spu_context *ctx, u32 val) +{ + ctx->csa.prob.spu_npc_RW = val; +} + +static u32 spu_backing_status_read(struct spu_context *ctx) +{ + return ctx->csa.prob.spu_status_R; +} + +static char *spu_backing_get_ls(struct spu_context *ctx) +{ + return ctx->csa.lscsa->ls; +} + +static void spu_backing_runcntl_write(struct spu_context *ctx, u32 val) +{ + spin_lock(&ctx->csa.register_lock); + ctx->csa.prob.spu_runcntl_RW = val; + if (val & SPU_RUNCNTL_RUNNABLE) { + ctx->csa.prob.spu_status_R |= SPU_STATUS_RUNNING; + } else { + ctx->csa.prob.spu_status_R &= ~SPU_STATUS_RUNNING; + } + spin_unlock(&ctx->csa.register_lock); +} + +static void spu_backing_runcntl_stop(struct spu_context *ctx) +{ + spu_backing_runcntl_write(ctx, SPU_RUNCNTL_STOP); +} + +struct spu_context_ops spu_backing_ops = { + .mbox_read = spu_backing_mbox_read, + .mbox_stat_read = spu_backing_mbox_stat_read, + .mbox_stat_poll = spu_backing_mbox_stat_poll, + .ibox_read = spu_backing_ibox_read, + .wbox_write = spu_backing_wbox_write, + .signal1_read = spu_backing_signal1_read, + .signal1_write = spu_backing_signal1_write, + .signal2_read = spu_backing_signal2_read, + .signal2_write = spu_backing_signal2_write, + .signal1_type_set = spu_backing_signal1_type_set, + .signal1_type_get = spu_backing_signal1_type_get, + .signal2_type_set = spu_backing_signal2_type_set, + .signal2_type_get = spu_backing_signal2_type_get, + .npc_read = spu_backing_npc_read, + .npc_write = spu_backing_npc_write, + .status_read = spu_backing_status_read, + .get_ls = spu_backing_get_ls, + .runcntl_write = spu_backing_runcntl_write, + .runcntl_stop = spu_backing_runcntl_stop, +}; diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c new file mode 100644 index 0000000..336f238 --- /dev/null +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -0,0 +1,167 @@ +/* + * SPU file system -- SPU context management + * + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 + * + * Author: Arnd Bergmann <arndb@de.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/fs.h> +#include <linux/mm.h> +#include <linux/slab.h> +#include <asm/spu.h> +#include <asm/spu_csa.h> +#include "spufs.h" + +struct spu_context *alloc_spu_context(struct address_space *local_store) +{ + struct spu_context *ctx; + ctx = kmalloc(sizeof *ctx, GFP_KERNEL); + if (!ctx) + goto out; + /* Binding to physical processor deferred + * until spu_activate(). + */ + spu_init_csa(&ctx->csa); + if (!ctx->csa.lscsa) { + goto out_free; + } + spin_lock_init(&ctx->mmio_lock); + kref_init(&ctx->kref); + init_rwsem(&ctx->state_sema); + init_MUTEX(&ctx->run_sema); + init_waitqueue_head(&ctx->ibox_wq); + init_waitqueue_head(&ctx->wbox_wq); + init_waitqueue_head(&ctx->stop_wq); + ctx->ibox_fasync = NULL; + ctx->wbox_fasync = NULL; + ctx->state = SPU_STATE_SAVED; + ctx->local_store = local_store; + ctx->spu = NULL; + ctx->ops = &spu_backing_ops; + ctx->owner = get_task_mm(current); + goto out; +out_free: + kfree(ctx); + ctx = NULL; +out: + return ctx; +} + +void destroy_spu_context(struct kref *kref) +{ + struct spu_context *ctx; + ctx = container_of(kref, struct spu_context, kref); + down_write(&ctx->state_sema); + spu_deactivate(ctx); + ctx->ibox_fasync = NULL; + ctx->wbox_fasync = NULL; + up_write(&ctx->state_sema); + spu_fini_csa(&ctx->csa); + kfree(ctx); +} + +struct spu_context * get_spu_context(struct spu_context *ctx) +{ + kref_get(&ctx->kref); + return ctx; +} + +int put_spu_context(struct spu_context *ctx) +{ + return kref_put(&ctx->kref, &destroy_spu_context); +} + +/* give up the mm reference when the context is about to be destroyed */ +void spu_forget(struct spu_context *ctx) +{ + struct mm_struct *mm; + spu_acquire_saved(ctx); + mm = ctx->owner; + ctx->owner = NULL; + mmput(mm); + spu_release(ctx); +} + +void spu_acquire(struct spu_context *ctx) +{ + down_read(&ctx->state_sema); +} + +void spu_release(struct spu_context *ctx) +{ + up_read(&ctx->state_sema); +} + +void spu_unmap_mappings(struct spu_context *ctx) +{ + unmap_mapping_range(ctx->local_store, 0, LS_SIZE, 1); +} + +int spu_acquire_runnable(struct spu_context *ctx) +{ + int ret = 0; + + down_read(&ctx->state_sema); + if (ctx->state == SPU_STATE_RUNNABLE) { + ctx->spu->prio = current->prio; + return 0; + } + up_read(&ctx->state_sema); + + down_write(&ctx->state_sema); + /* ctx is about to be freed, can't acquire any more */ + if (!ctx->owner) { + ret = -EINVAL; + goto out; + } + + if (ctx->state == SPU_STATE_SAVED) { + ret = spu_activate(ctx, 0); + if (ret) + goto out; + ctx->state = SPU_STATE_RUNNABLE; + } + + downgrade_write(&ctx->state_sema); + /* On success, we return holding the lock */ + + return ret; +out: + /* Release here, to simplify calling code. */ + up_write(&ctx->state_sema); + + return ret; +} + +void spu_acquire_saved(struct spu_context *ctx) +{ + down_read(&ctx->state_sema); + + if (ctx->state == SPU_STATE_SAVED) + return; + + up_read(&ctx->state_sema); + down_write(&ctx->state_sema); + + if (ctx->state == SPU_STATE_RUNNABLE) { + spu_deactivate(ctx); + ctx->state = SPU_STATE_SAVED; + } + + downgrade_write(&ctx->state_sema); +} diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c new file mode 100644 index 0000000..dfa649c --- /dev/null +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -0,0 +1,794 @@ +/* + * SPU file system -- file contents + * + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 + * + * Author: Arnd Bergmann <arndb@de.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/fs.h> +#include <linux/ioctl.h> +#include <linux/module.h> +#include <linux/pagemap.h> +#include <linux/poll.h> +#include <linux/ptrace.h> + +#include <asm/io.h> +#include <asm/semaphore.h> +#include <asm/spu.h> +#include <asm/uaccess.h> + +#include "spufs.h" + + +static int +spufs_mem_open(struct inode *inode, struct file *file) +{ + struct spufs_inode_info *i = SPUFS_I(inode); + file->private_data = i->i_ctx; + file->f_mapping = i->i_ctx->local_store; + return 0; +} + +static ssize_t +spufs_mem_read(struct file *file, char __user *buffer, + size_t size, loff_t *pos) +{ + struct spu_context *ctx = file->private_data; + char *local_store; + int ret; + + spu_acquire(ctx); + + local_store = ctx->ops->get_ls(ctx); + ret = simple_read_from_buffer(buffer, size, pos, local_store, LS_SIZE); + + spu_release(ctx); + return ret; +} + +static ssize_t +spufs_mem_write(struct file *file, const char __user *buffer, + size_t size, loff_t *pos) +{ + struct spu_context *ctx = file->private_data; + char *local_store; + int ret; + + size = min_t(ssize_t, LS_SIZE - *pos, size); + if (size <= 0) + return -EFBIG; + *pos += size; + + spu_acquire(ctx); + + local_store = ctx->ops->get_ls(ctx); + ret = copy_from_user(local_store + *pos - size, + buffer, size) ? -EFAULT : size; + + spu_release(ctx); + return ret; +} + +#ifdef CONFIG_SPARSEMEM +static struct page * +spufs_mem_mmap_nopage(struct vm_area_struct *vma, + unsigned long address, int *type) +{ + struct page *page = NOPAGE_SIGBUS; + + struct spu_context *ctx = vma->vm_file->private_data; + unsigned long offset = address - vma->vm_start; + offset += vma->vm_pgoff << PAGE_SHIFT; + + spu_acquire(ctx); + + if (ctx->state == SPU_STATE_SAVED) + page = vmalloc_to_page(ctx->csa.lscsa->ls + offset); + else + page = pfn_to_page((ctx->spu->local_store_phys + offset) + >> PAGE_SHIFT); + + spu_release(ctx); + + if (type) + *type = VM_FAULT_MINOR; + + page_cache_get(page); + return page; +} + +static struct vm_operations_struct spufs_mem_mmap_vmops = { + .nopage = spufs_mem_mmap_nopage, +}; + +static int +spufs_mem_mmap(struct file *file, struct vm_area_struct *vma) +{ + if (!(vma->vm_flags & VM_SHARED)) + return -EINVAL; + + /* FIXME: */ + vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) + | _PAGE_NO_CACHE); + + vma->vm_ops = &spufs_mem_mmap_vmops; + return 0; +} +#endif + +static struct file_operations spufs_mem_fops = { + .open = spufs_mem_open, + .read = spufs_mem_read, + .write = spufs_mem_write, + .llseek = generic_file_llseek, +#ifdef CONFIG_SPARSEMEM + .mmap = spufs_mem_mmap, +#endif +}; + +static int +spufs_regs_open(struct inode *inode, struct file *file) +{ + struct spufs_inode_info *i = SPUFS_I(inode); + file->private_data = i->i_ctx; + return 0; +} + +static ssize_t +spufs_regs_read(struct file *file, char __user *buffer, + size_t size, loff_t *pos) +{ + struct spu_context *ctx = file->private_data; + struct spu_lscsa *lscsa = ctx->csa.lscsa; + int ret; + + spu_acquire_saved(ctx); + + ret = simple_read_from_buffer(buffer, size, pos, + lscsa->gprs, sizeof lscsa->gprs); + + spu_release(ctx); + return ret; +} + +static ssize_t +spufs_regs_write(struct file *file, const char __user *buffer, + size_t size, loff_t *pos) +{ + struct spu_context *ctx = file->private_data; + struct spu_lscsa *lscsa = ctx->csa.lscsa; + int ret; + + size = min_t(ssize_t, sizeof lscsa->gprs - *pos, size); + if (size <= 0) + return -EFBIG; + *pos += size; + + spu_acquire_saved(ctx); + + ret = copy_from_user(lscsa->gprs + *pos - size, + buffer, size) ? -EFAULT : size; + + spu_release(ctx); + return ret; +} + +static struct file_operations spufs_regs_fops = { + .open = spufs_regs_open, + .read = spufs_regs_read, + .write = spufs_regs_write, + .llseek = generic_file_llseek, +}; + +static ssize_t +spufs_fpcr_read(struct file *file, char __user * buffer, + size_t size, loff_t * pos) +{ + struct spu_context *ctx = file->private_data; + struct spu_lscsa *lscsa = ctx->csa.lscsa; + int ret; + + spu_acquire_saved(ctx); + + ret = simple_read_from_buffer(buffer, size, pos, + &lscsa->fpcr, sizeof(lscsa->fpcr)); + + spu_release(ctx); + return ret; +} + +static ssize_t +spufs_fpcr_write(struct file *file, const char __user * buffer, + size_t size, loff_t * pos) +{ + struct spu_context *ctx = file->private_data; + struct spu_lscsa *lscsa = ctx->csa.lscsa; + int ret; + + size = min_t(ssize_t, sizeof(lscsa->fpcr) - *pos, size); + if (size <= 0) + return -EFBIG; + *pos += size; + + spu_acquire_saved(ctx); + + ret = copy_from_user((char *)&lscsa->fpcr + *pos - size, + buffer, size) ? -EFAULT : size; + + spu_release(ctx); + return ret; +} + +static struct file_operations spufs_fpcr_fops = { + .open = spufs_regs_open, + .read = spufs_fpcr_read, + .write = spufs_fpcr_write, + .llseek = generic_file_llseek, +}; + +/* generic open function for all pipe-like files */ +static int spufs_pipe_open(struct inode *inode, struct file *file) +{ + struct spufs_inode_info *i = SPUFS_I(inode); + file->private_data = i->i_ctx; + + return nonseekable_open(inode, file); +} + +static ssize_t spufs_mbox_read(struct file *file, char __user *buf, + size_t len, loff_t *pos) +{ + struct spu_context *ctx = file->private_data; + u32 mbox_data; + int ret; + + if (len < 4) + return -EINVAL; + + spu_acquire(ctx); + ret = ctx->ops->mbox_read(ctx, &mbox_data); + spu_release(ctx); + + if (!ret) + return -EAGAIN; + + if (copy_to_user(buf, &mbox_data, sizeof mbox_data)) + return -EFAULT; + + return 4; +} + +static struct file_operations spufs_mbox_fops = { + .open = spufs_pipe_open, + .read = spufs_mbox_read, +}; + +static ssize_t spufs_mbox_stat_read(struct file *file, char __user *buf, + size_t len, loff_t *pos) +{ + struct spu_context *ctx = file->private_data; + u32 mbox_stat; + + if (len < 4) + return -EINVAL; + + spu_acquire(ctx); + + mbox_stat = ctx->ops->mbox_stat_read(ctx) & 0xff; + + spu_release(ctx); + + if (copy_to_user(buf, &mbox_stat, sizeof mbox_stat)) + return -EFAULT; + + return 4; +} + +static struct file_operations spufs_mbox_stat_fops = { + .open = spufs_pipe_open, + .read = spufs_mbox_stat_read, +}; + +/* low-level ibox access function */ +size_t spu_ibox_read(struct spu_context *ctx, u32 *data) +{ + return ctx->ops->ibox_read(ctx, data); +} + +static int spufs_ibox_fasync(int fd, struct file *file, int on) +{ + struct spu_context *ctx = file->private_data; + + return fasync_helper(fd, file, on, &ctx->ibox_fasync); +} + +/* interrupt-level ibox callback function. */ +void spufs_ibox_callback(struct spu *spu) +{ + struct spu_context *ctx = spu->ctx; + + wake_up_all(&ctx->ibox_wq); + kill_fasync(&ctx->ibox_fasync, SIGIO, POLLIN); +} + +static ssize_t spufs_ibox_read(struct file *file, char __user *buf, + size_t len, loff_t *pos) +{ + struct spu_context *ctx = file->private_data; + u32 ibox_data; + ssize_t ret; + + if (len < 4) + return -EINVAL; + + spu_acquire(ctx); + + ret = 0; + if (file->f_flags & O_NONBLOCK) { + if (!spu_ibox_read(ctx, &ibox_data)) + ret = -EAGAIN; + } else { + ret = spufs_wait(ctx->ibox_wq, spu_ibox_read(ctx, &ibox_data)); + } + + spu_release(ctx); + + if (ret) + return ret; + + ret = 4; + if (copy_to_user(buf, &ibox_data, sizeof ibox_data)) + ret = -EFAULT; + + return ret; +} + +static unsigned int spufs_ibox_poll(struct file *file, poll_table *wait) +{ + struct spu_context *ctx = file->private_data; + unsigned int mask; + + poll_wait(file, &ctx->ibox_wq, wait); + + spu_acquire(ctx); + mask = ctx->ops->mbox_stat_poll(ctx, POLLIN | POLLRDNORM); + spu_release(ctx); + + return mask; +} + +static struct file_operations spufs_ibox_fops = { + .open = spufs_pipe_open, + .read = spufs_ibox_read, + .poll = spufs_ibox_poll, + .fasync = spufs_ibox_fasync, +}; + +static ssize_t spufs_ibox_stat_read(struct file *file, char __user *buf, + size_t len, loff_t *pos) +{ + struct spu_context *ctx = file->private_data; + u32 ibox_stat; + + if (len < 4) + return -EINVAL; + + spu_acquire(ctx); + ibox_stat = (ctx->ops->mbox_stat_read(ctx) >> 16) & 0xff; + spu_release(ctx); + + if (copy_to_user(buf, &ibox_stat, sizeof ibox_stat)) + return -EFAULT; + + return 4; +} + +static struct file_operations spufs_ibox_stat_fops = { + .open = spufs_pipe_open, + .read = spufs_ibox_stat_read, +}; + +/* low-level mailbox write */ +size_t spu_wbox_write(struct spu_context *ctx, u32 data) +{ + return ctx->ops->wbox_write(ctx, data); +} + +static int spufs_wbox_fasync(int fd, struct file *file, int on) +{ + struct spu_context *ctx = file->private_data; + int ret; + + ret = fasync_helper(fd, file, on, &ctx->wbox_fasync); + + return ret; +} + +/* interrupt-level wbox callback function. */ +void spufs_wbox_callback(struct spu *spu) +{ + struct spu_context *ctx = spu->ctx; + + wake_up_all(&ctx->wbox_wq); + kill_fasync(&ctx->wbox_fasync, SIGIO, POLLOUT); +} + +static ssize_t spufs_wbox_write(struct file *file, const char __user *buf, + size_t len, loff_t *pos) +{ + struct spu_context *ctx = file->private_data; + u32 wbox_data; + int ret; + + if (len < 4) + return -EINVAL; + + if (copy_from_user(&wbox_data, buf, sizeof wbox_data)) + return -EFAULT; + + spu_acquire(ctx); + + ret = 0; + if (file->f_flags & O_NONBLOCK) { + if (!spu_wbox_write(ctx, wbox_data)) + ret = -EAGAIN; + } else { + ret = spufs_wait(ctx->wbox_wq, spu_wbox_write(ctx, wbox_data)); + } + + spu_release(ctx); + + return ret ? ret : sizeof wbox_data; +} + +static unsigned int spufs_wbox_poll(struct file *file, poll_table *wait) +{ + struct spu_context *ctx = file->private_data; + unsigned int mask; + + poll_wait(file, &ctx->wbox_wq, wait); + + spu_acquire(ctx); + mask = ctx->ops->mbox_stat_poll(ctx, POLLOUT | POLLWRNORM); + spu_release(ctx); + + return mask; +} + +static struct file_operations spufs_wbox_fops = { + .open = spufs_pipe_open, + .write = spufs_wbox_write, + .poll = spufs_wbox_poll, + .fasync = spufs_wbox_fasync, +}; + +static ssize_t spufs_wbox_stat_read(struct file *file, char __user *buf, + size_t len, loff_t *pos) +{ + struct spu_context *ctx = file->private_data; + u32 wbox_stat; + + if (len < 4) + return -EINVAL; + + spu_acquire(ctx); + wbox_stat = (ctx->ops->mbox_stat_read(ctx) >> 8) & 0xff; + spu_release(ctx); + + if (copy_to_user(buf, &wbox_stat, sizeof wbox_stat)) + return -EFAULT; + + return 4; +} + +static struct file_operations spufs_wbox_stat_fops = { + .open = spufs_pipe_open, + .read = spufs_wbox_stat_read, +}; + +static ssize_t spufs_signal1_read(struct file *file, char __user *buf, + size_t len, loff_t *pos) +{ + struct spu_context *ctx = file->private_data; + u32 data; + + if (len < 4) + return -EINVAL; + + spu_acquire(ctx); + data = ctx->ops->signal1_read(ctx); + spu_release(ctx); + + if (copy_to_user(buf, &data, 4)) + return -EFAULT; + + return 4; +} + +static ssize_t spufs_signal1_write(struct file *file, const char __user *buf, + size_t len, loff_t *pos) +{ + struct spu_context *ctx; + u32 data; + + ctx = file->private_data; + + if (len < 4) + return -EINVAL; + + if (copy_from_user(&data, buf, 4)) + return -EFAULT; + + spu_acquire(ctx); + ctx->ops->signal1_write(ctx, data); + spu_release(ctx); + + return 4; +} + +static struct file_operations spufs_signal1_fops = { + .open = spufs_pipe_open, + .read = spufs_signal1_read, + .write = spufs_signal1_write, +}; + +static ssize_t spufs_signal2_read(struct file *file, char __user *buf, + size_t len, loff_t *pos) +{ + struct spu_context *ctx; + u32 data; + + ctx = file->private_data; + + if (len < 4) + return -EINVAL; + + spu_acquire(ctx); + data = ctx->ops->signal2_read(ctx); + spu_release(ctx); + + if (copy_to_user(buf, &data, 4)) + return -EFAULT; + + return 4; +} + +static ssize_t spufs_signal2_write(struct file *file, const char __user *buf, + size_t len, loff_t *pos) +{ + struct spu_context *ctx; + u32 data; + + ctx = file->private_data; + + if (len < 4) + return -EINVAL; + + if (copy_from_user(&data, buf, 4)) + return -EFAULT; + + spu_acquire(ctx); + ctx->ops->signal2_write(ctx, data); + spu_release(ctx); + + return 4; +} + +static struct file_operations spufs_signal2_fops = { + .open = spufs_pipe_open, + .read = spufs_signal2_read, + .write = spufs_signal2_write, +}; + +static void spufs_signal1_type_set(void *data, u64 val) +{ + struct spu_context *ctx = data; + + spu_acquire(ctx); + ctx->ops->signal1_type_set(ctx, val); + spu_release(ctx); +} + +static u64 spufs_signal1_type_get(void *data) +{ + struct spu_context *ctx = data; + u64 ret; + + spu_acquire(ctx); + ret = ctx->ops->signal1_type_get(ctx); + spu_release(ctx); + + return ret; +} +DEFINE_SIMPLE_ATTRIBUTE(spufs_signal1_type, spufs_signal1_type_get, + spufs_signal1_type_set, "%llu"); + +static void spufs_signal2_type_set(void *data, u64 val) +{ + struct spu_context *ctx = data; + + spu_acquire(ctx); + ctx->ops->signal2_type_set(ctx, val); + spu_release(ctx); +} + +static u64 spufs_signal2_type_get(void *data) +{ + struct spu_context *ctx = data; + u64 ret; + + spu_acquire(ctx); + ret = ctx->ops->signal2_type_get(ctx); + spu_release(ctx); + + return ret; +} +DEFINE_SIMPLE_ATTRIBUTE(spufs_signal2_type, spufs_signal2_type_get, + spufs_signal2_type_set, "%llu"); + +static void spufs_npc_set(void *data, u64 val) +{ + struct spu_context *ctx = data; + spu_acquire(ctx); + ctx->ops->npc_write(ctx, val); + spu_release(ctx); +} + +static u64 spufs_npc_get(void *data) +{ + struct spu_context *ctx = data; + u64 ret; + spu_acquire(ctx); + ret = ctx->ops->npc_read(ctx); + spu_release(ctx); + return ret; +} +DEFINE_SIMPLE_ATTRIBUTE(spufs_npc_ops, spufs_npc_get, spufs_npc_set, "%llx\n") + +static void spufs_decr_set(void *data, u64 val) +{ + struct spu_context *ctx = data; + struct spu_lscsa *lscsa = ctx->csa.lscsa; + spu_acquire_saved(ctx); + lscsa->decr.slot[0] = (u32) val; + spu_release(ctx); +} + +static u64 spufs_decr_get(void *data) +{ + struct spu_context *ctx = data; + struct spu_lscsa *lscsa = ctx->csa.lscsa; + u64 ret; + spu_acquire_saved(ctx); + ret = lscsa->decr.slot[0]; + spu_release(ctx); + return ret; +} +DEFINE_SIMPLE_ATTRIBUTE(spufs_decr_ops, spufs_decr_get, spufs_decr_set, + "%llx\n") + +static void spufs_decr_status_set(void *data, u64 val) +{ + struct spu_context *ctx = data; + struct spu_lscsa *lscsa = ctx->csa.lscsa; + spu_acquire_saved(ctx); + lscsa->decr_status.slot[0] = (u32) val; + spu_release(ctx); +} + +static u64 spufs_decr_status_get(void *data) +{ + struct spu_context *ctx = data; + struct spu_lscsa *lscsa = ctx->csa.lscsa; + u64 ret; + spu_acquire_saved(ctx); + ret = lscsa->decr_status.slot[0]; + spu_release(ctx); + return ret; +} +DEFINE_SIMPLE_ATTRIBUTE(spufs_decr_status_ops, spufs_decr_status_get, + spufs_decr_status_set, "%llx\n") + +static void spufs_spu_tag_mask_set(void *data, u64 val) +{ + struct spu_context *ctx = data; + struct spu_lscsa *lscsa = ctx->csa.lscsa; + spu_acquire_saved(ctx); + lscsa->tag_mask.slot[0] = (u32) val; + spu_release(ctx); +} + +static u64 spufs_spu_tag_mask_get(void *data) +{ + struct spu_context *ctx = data; + struct spu_lscsa *lscsa = ctx->csa.lscsa; + u64 ret; + spu_acquire_saved(ctx); + ret = lscsa->tag_mask.slot[0]; + spu_release(ctx); + return ret; +} +DEFINE_SIMPLE_ATTRIBUTE(spufs_spu_tag_mask_ops, spufs_spu_tag_mask_get, + spufs_spu_tag_mask_set, "%llx\n") + +static void spufs_event_mask_set(void *data, u64 val) +{ + struct spu_context *ctx = data; + struct spu_lscsa *lscsa = ctx->csa.lscsa; + spu_acquire_saved(ctx); + lscsa->event_mask.slot[0] = (u32) val; + spu_release(ctx); +} + +static u64 spufs_event_mask_get(void *data) +{ + struct spu_context *ctx = data; + struct spu_lscsa *lscsa = ctx->csa.lscsa; + u64 ret; + spu_acquire_saved(ctx); + ret = lscsa->event_mask.slot[0]; + spu_release(ctx); + return ret; +} +DEFINE_SIMPLE_ATTRIBUTE(spufs_event_mask_ops, spufs_event_mask_get, + spufs_event_mask_set, "%llx\n") + +static void spufs_srr0_set(void *data, u64 val) +{ + struct spu_context *ctx = data; + struct spu_lscsa *lscsa = ctx->csa.lscsa; + spu_acquire_saved(ctx); + lscsa->srr0.slot[0] = (u32) val; + spu_release(ctx); +} + +static u64 spufs_srr0_get(void *data) +{ + struct spu_context *ctx = data; + struct spu_lscsa *lscsa = ctx->csa.lscsa; + u64 ret; + spu_acquire_saved(ctx); + ret = lscsa->srr0.slot[0]; + spu_release(ctx); + return ret; +} +DEFINE_SIMPLE_ATTRIBUTE(spufs_srr0_ops, spufs_srr0_get, spufs_srr0_set, + "%llx\n") + +struct tree_descr spufs_dir_contents[] = { + { "mem", &spufs_mem_fops, 0666, }, + { "regs", &spufs_regs_fops, 0666, }, + { "mbox", &spufs_mbox_fops, 0444, }, + { "ibox", &spufs_ibox_fops, 0444, }, + { "wbox", &spufs_wbox_fops, 0222, }, + { "mbox_stat", &spufs_mbox_stat_fops, 0444, }, + { "ibox_stat", &spufs_ibox_stat_fops, 0444, }, + { "wbox_stat", &spufs_wbox_stat_fops, 0444, }, + { "signal1", &spufs_signal1_fops, 0666, }, + { "signal2", &spufs_signal2_fops, 0666, }, + { "signal1_type", &spufs_signal1_type, 0666, }, + { "signal2_type", &spufs_signal2_type, 0666, }, + { "npc", &spufs_npc_ops, 0666, }, + { "fpcr", &spufs_fpcr_fops, 0666, }, + { "decr", &spufs_decr_ops, 0666, }, + { "decr_status", &spufs_decr_status_ops, 0666, }, + { "spu_tag_mask", &spufs_spu_tag_mask_ops, 0666, }, + { "event_mask", &spufs_event_mask_ops, 0666, }, + { "srr0", &spufs_srr0_ops, 0666, }, + {}, +}; diff --git a/arch/powerpc/platforms/cell/spufs/hw_ops.c b/arch/powerpc/platforms/cell/spufs/hw_ops.c new file mode 100644 index 0000000..5445719 --- /dev/null +++ b/arch/powerpc/platforms/cell/spufs/hw_ops.c @@ -0,0 +1,255 @@ +/* hw_ops.c - query/set operations on active SPU context. + * + * Copyright (C) IBM 2005 + * Author: Mark Nutter <mnutter@us.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/poll.h> +#include <linux/smp.h> +#include <linux/smp_lock.h> +#include <linux/stddef.h> +#include <linux/unistd.h> + +#include <asm/io.h> +#include <asm/spu.h> +#include <asm/spu_csa.h> +#include <asm/mmu_context.h> +#include "spufs.h" + +static int spu_hw_mbox_read(struct spu_context *ctx, u32 * data) +{ + struct spu *spu = ctx->spu; + struct spu_problem __iomem *prob = spu->problem; + u32 mbox_stat; + int ret = 0; + + spin_lock_irq(&spu->register_lock); + mbox_stat = in_be32(&prob->mb_stat_R); + if (mbox_stat & 0x0000ff) { + *data = in_be32(&prob->pu_mb_R); + ret = 4; + } + spin_unlock_irq(&spu->register_lock); + return ret; +} + +static u32 spu_hw_mbox_stat_read(struct spu_context *ctx) +{ + return in_be32(&ctx->spu->problem->mb_stat_R); +} + +static unsigned int spu_hw_mbox_stat_poll(struct spu_context *ctx, + unsigned int events) +{ + struct spu *spu = ctx->spu; + int ret = 0; + u32 stat; + + spin_lock_irq(&spu->register_lock); + stat = in_be32(&spu->problem->mb_stat_R); + + /* if the requested event is there, return the poll + mask, otherwise enable the interrupt to get notified, + but first mark any pending interrupts as done so + we don't get woken up unnecessarily */ + + if (events & (POLLIN | POLLRDNORM)) { + if (stat & 0xff0000) + ret |= POLLIN | POLLRDNORM; + else { + spu_int_stat_clear(spu, 2, 0x1); + spu_int_mask_or(spu, 2, 0x1); + } + } + if (events & (POLLOUT | POLLWRNORM)) { + if (stat & 0x00ff00) + ret = POLLOUT | POLLWRNORM; + else { + spu_int_stat_clear(spu, 2, 0x10); + spu_int_mask_or(spu, 2, 0x10); + } + } + spin_unlock_irq(&spu->register_lock); + return ret; +} + +static int spu_hw_ibox_read(struct spu_context *ctx, u32 * data) +{ + struct spu *spu = ctx->spu; + struct spu_problem __iomem *prob = spu->problem; + struct spu_priv2 __iomem *priv2 = spu->priv2; + int ret; + + spin_lock_irq(&spu->register_lock); + if (in_be32(&prob->mb_stat_R) & 0xff0000) { + /* read the first available word */ + *data = in_be64(&priv2->puint_mb_R); + ret = 4; + } else { + /* make sure we get woken up by the interrupt */ + spu_int_mask_or(spu, 2, 0x1); + ret = 0; + } + spin_unlock_irq(&spu->register_lock); + return ret; +} + +static int spu_hw_wbox_write(struct spu_context *ctx, u32 data) +{ + struct spu *spu = ctx->spu; + struct spu_problem __iomem *prob = spu->problem; + int ret; + + spin_lock_irq(&spu->register_lock); + if (in_be32(&prob->mb_stat_R) & 0x00ff00) { + /* we have space to write wbox_data to */ + out_be32(&prob->spu_mb_W, data); + ret = 4; + } else { + /* make sure we get woken up by the interrupt when space + becomes available */ + spu_int_mask_or(spu, 2, 0x10); + ret = 0; + } + spin_unlock_irq(&spu->register_lock); + return ret; +} + +static u32 spu_hw_signal1_read(struct spu_context *ctx) +{ + return in_be32(&ctx->spu->problem->signal_notify1); +} + +static void spu_hw_signal1_write(struct spu_context *ctx, u32 data) +{ + out_be32(&ctx->spu->problem->signal_notify1, data); +} + +static u32 spu_hw_signal2_read(struct spu_context *ctx) +{ + return in_be32(&ctx->spu->problem->signal_notify1); +} + +static void spu_hw_signal2_write(struct spu_context *ctx, u32 data) +{ + out_be32(&ctx->spu->problem->signal_notify2, data); +} + +static void spu_hw_signal1_type_set(struct spu_context *ctx, u64 val) +{ + struct spu *spu = ctx->spu; + struct spu_priv2 __iomem *priv2 = spu->priv2; + u64 tmp; + + spin_lock_irq(&spu->register_lock); + tmp = in_be64(&priv2->spu_cfg_RW); + if (val) + tmp |= 1; + else + tmp &= ~1; + out_be64(&priv2->spu_cfg_RW, tmp); + spin_unlock_irq(&spu->register_lock); +} + +static u64 spu_hw_signal1_type_get(struct spu_context *ctx) +{ + return ((in_be64(&ctx->spu->priv2->spu_cfg_RW) & 1) != 0); +} + +static void spu_hw_signal2_type_set(struct spu_context *ctx, u64 val) +{ + struct spu *spu = ctx->spu; + struct spu_priv2 __iomem *priv2 = spu->priv2; + u64 tmp; + + spin_lock_irq(&spu->register_lock); + tmp = in_be64(&priv2->spu_cfg_RW); + if (val) + tmp |= 2; + else + tmp &= ~2; + out_be64(&priv2->spu_cfg_RW, tmp); + spin_unlock_irq(&spu->register_lock); +} + +static u64 spu_hw_signal2_type_get(struct spu_context *ctx) +{ + return ((in_be64(&ctx->spu->priv2->spu_cfg_RW) & 2) != 0); +} + +static u32 spu_hw_npc_read(struct spu_context *ctx) +{ + return in_be32(&ctx->spu->problem->spu_npc_RW); +} + +static void spu_hw_npc_write(struct spu_context *ctx, u32 val) +{ + out_be32(&ctx->spu->problem->spu_npc_RW, val); +} + +static u32 spu_hw_status_read(struct spu_context *ctx) +{ + return in_be32(&ctx->spu->problem->spu_status_R); +} + +static char *spu_hw_get_ls(struct spu_context *ctx) +{ + return ctx->spu->local_store; +} + +static void spu_hw_runcntl_write(struct spu_context *ctx, u32 val) +{ + eieio(); + out_be32(&ctx->spu->problem->spu_runcntl_RW, val); +} + +static void spu_hw_runcntl_stop(struct spu_context *ctx) +{ + spin_lock_irq(&ctx->spu->register_lock); + out_be32(&ctx->spu->problem->spu_runcntl_RW, SPU_RUNCNTL_STOP); + while (in_be32(&ctx->spu->problem->spu_status_R) & SPU_STATUS_RUNNING) + cpu_relax(); + spin_unlock_irq(&ctx->spu->register_lock); +} + +struct spu_context_ops spu_hw_ops = { + .mbox_read = spu_hw_mbox_read, + .mbox_stat_read = spu_hw_mbox_stat_read, + .mbox_stat_poll = spu_hw_mbox_stat_poll, + .ibox_read = spu_hw_ibox_read, + .wbox_write = spu_hw_wbox_write, + .signal1_read = spu_hw_signal1_read, + .signal1_write = spu_hw_signal1_write, + .signal2_read = spu_hw_signal2_read, + .signal2_write = spu_hw_signal2_write, + .signal1_type_set = spu_hw_signal1_type_set, + .signal1_type_get = spu_hw_signal1_type_get, + .signal2_type_set = spu_hw_signal2_type_set, + .signal2_type_get = spu_hw_signal2_type_get, + .npc_read = spu_hw_npc_read, + .npc_write = spu_hw_npc_write, + .status_read = spu_hw_status_read, + .get_ls = spu_hw_get_ls, + .runcntl_write = spu_hw_runcntl_write, + .runcntl_stop = spu_hw_runcntl_stop, +}; diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c new file mode 100644 index 0000000..1f3507c --- /dev/null +++ b/arch/powerpc/platforms/cell/spufs/inode.c @@ -0,0 +1,486 @@ +/* + * SPU file system + * + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 + * + * Author: Arnd Bergmann <arndb@de.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/file.h> +#include <linux/fs.h> +#include <linux/backing-dev.h> +#include <linux/init.h> +#include <linux/ioctl.h> +#include <linux/module.h> +#include <linux/mount.h> +#include <linux/namei.h> +#include <linux/pagemap.h> +#include <linux/poll.h> +#include <linux/slab.h> +#include <linux/parser.h> + +#include <asm/io.h> +#include <asm/semaphore.h> +#include <asm/spu.h> +#include <asm/uaccess.h> + +#include "spufs.h" + +static kmem_cache_t *spufs_inode_cache; + +static struct inode * +spufs_alloc_inode(struct super_block *sb) +{ + struct spufs_inode_info *ei; + + ei = kmem_cache_alloc(spufs_inode_cache, SLAB_KERNEL); + if (!ei) + return NULL; + return &ei->vfs_inode; +} + +static void +spufs_destroy_inode(struct inode *inode) +{ + kmem_cache_free(spufs_inode_cache, SPUFS_I(inode)); +} + +static void +spufs_init_once(void *p, kmem_cache_t * cachep, unsigned long flags) +{ + struct spufs_inode_info *ei = p; + + if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) == + SLAB_CTOR_CONSTRUCTOR) { + inode_init_once(&ei->vfs_inode); + } +} + +static struct inode * +spufs_new_inode(struct super_block *sb, int mode) +{ + struct inode *inode; + + inode = new_inode(sb); + if (!inode) + goto out; + + inode->i_mode = mode; + inode->i_uid = current->fsuid; + inode->i_gid = current->fsgid; + inode->i_blksize = PAGE_CACHE_SIZE; + inode->i_blocks = 0; + inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME; +out: + return inode; +} + +static int +spufs_setattr(struct dentry *dentry, struct iattr *attr) +{ + struct inode *inode = dentry->d_inode; + + if ((attr->ia_valid & ATTR_SIZE) && + (attr->ia_size != inode->i_size)) + return -EINVAL; + return inode_setattr(inode, attr); +} + + +static int +spufs_new_file(struct super_block *sb, struct dentry *dentry, + struct file_operations *fops, int mode, + struct spu_context *ctx) +{ + static struct inode_operations spufs_file_iops = { + .setattr = spufs_setattr, + }; + struct inode *inode; + int ret; + + ret = -ENOSPC; + inode = spufs_new_inode(sb, S_IFREG | mode); + if (!inode) + goto out; + + ret = 0; + inode->i_op = &spufs_file_iops; + inode->i_fop = fops; + inode->u.generic_ip = SPUFS_I(inode)->i_ctx = get_spu_context(ctx); + d_add(dentry, inode); +out: + return ret; +} + +static void +spufs_delete_inode(struct inode *inode) +{ + if (SPUFS_I(inode)->i_ctx) + put_spu_context(SPUFS_I(inode)->i_ctx); + clear_inode(inode); +} + +static void spufs_prune_dir(struct dentry *dir) +{ + struct dentry *dentry, *tmp; + down(&dir->d_inode->i_sem); + list_for_each_entry_safe(dentry, tmp, &dir->d_subdirs, d_child) { + spin_lock(&dcache_lock); + spin_lock(&dentry->d_lock); + if (!(d_unhashed(dentry)) && dentry->d_inode) { + dget_locked(dentry); + __d_drop(dentry); + spin_unlock(&dentry->d_lock); + simple_unlink(dir->d_inode, dentry); + spin_unlock(&dcache_lock); + dput(dentry); + } else { + spin_unlock(&dentry->d_lock); + spin_unlock(&dcache_lock); + } + } + shrink_dcache_parent(dir); + up(&dir->d_inode->i_sem); +} + +static int spufs_rmdir(struct inode *root, struct dentry *dir_dentry) +{ + struct spu_context *ctx; + + /* remove all entries */ + down(&root->i_sem); + spufs_prune_dir(dir_dentry); + up(&root->i_sem); + + /* We have to give up the mm_struct */ + ctx = SPUFS_I(dir_dentry->d_inode)->i_ctx; + spu_forget(ctx); + + /* XXX Do we need to hold i_sem here ? */ + return simple_rmdir(root, dir_dentry); +} + +static int spufs_fill_dir(struct dentry *dir, struct tree_descr *files, + int mode, struct spu_context *ctx) +{ + struct dentry *dentry; + int ret; + + while (files->name && files->name[0]) { + ret = -ENOMEM; + dentry = d_alloc_name(dir, files->name); + if (!dentry) + goto out; + ret = spufs_new_file(dir->d_sb, dentry, files->ops, + files->mode & mode, ctx); + if (ret) + goto out; + files++; + } + return 0; +out: + spufs_prune_dir(dir); + return ret; +} + +static int spufs_dir_close(struct inode *inode, struct file *file) +{ + struct inode *dir; + struct dentry *dentry; + int ret; + + dentry = file->f_dentry; + dir = dentry->d_parent->d_inode; + + ret = spufs_rmdir(dir, dentry); + WARN_ON(ret); + + return dcache_dir_close(inode, file); +} + +struct inode_operations spufs_dir_inode_operations = { + .lookup = simple_lookup, +}; + +struct file_operations spufs_context_fops = { + .open = dcache_dir_open, + .release = spufs_dir_close, + .llseek = dcache_dir_lseek, + .read = generic_read_dir, + .readdir = dcache_readdir, + .fsync = simple_sync_file, +}; + +static int +spufs_mkdir(struct inode *dir, struct dentry *dentry, int mode) +{ + int ret; + struct inode *inode; + struct spu_context *ctx; + + ret = -ENOSPC; + inode = spufs_new_inode(dir->i_sb, mode | S_IFDIR); + if (!inode) + goto out; + + if (dir->i_mode & S_ISGID) { + inode->i_gid = dir->i_gid; + inode->i_mode &= S_ISGID; + } + ctx = alloc_spu_context(inode->i_mapping); + SPUFS_I(inode)->i_ctx = ctx; + if (!ctx) + goto out_iput; + + inode->i_op = &spufs_dir_inode_operations; + inode->i_fop = &simple_dir_operations; + ret = spufs_fill_dir(dentry, spufs_dir_contents, mode, ctx); + if (ret) + goto out_free_ctx; + + d_instantiate(dentry, inode); + dget(dentry); + dir->i_nlink++; + dentry->d_inode->i_nlink++; + goto out; + +out_free_ctx: + put_spu_context(ctx); +out_iput: + iput(inode); +out: + return ret; +} + +static int spufs_context_open(struct dentry *dentry, struct vfsmount *mnt) +{ + int ret; + struct file *filp; + + ret = get_unused_fd(); + if (ret < 0) { + dput(dentry); + mntput(mnt); + goto out; + } + + filp = dentry_open(dentry, mnt, O_RDONLY); + if (IS_ERR(filp)) { + put_unused_fd(ret); + ret = PTR_ERR(filp); + goto out; + } + + filp->f_op = &spufs_context_fops; + fd_install(ret, filp); +out: + return ret; +} + +static struct file_system_type spufs_type; + +long spufs_create_thread(struct nameidata *nd, + unsigned int flags, mode_t mode) +{ + struct dentry *dentry; + int ret; + + /* need to be at the root of spufs */ + ret = -EINVAL; + if (nd->dentry->d_sb->s_type != &spufs_type || + nd->dentry != nd->dentry->d_sb->s_root) + goto out; + + dentry = lookup_create(nd, 1); + ret = PTR_ERR(dentry); + if (IS_ERR(dentry)) + goto out_dir; + + ret = -EEXIST; + if (dentry->d_inode) + goto out_dput; + + mode &= ~current->fs->umask; + ret = spufs_mkdir(nd->dentry->d_inode, dentry, mode & S_IRWXUGO); + if (ret) + goto out_dput; + + /* + * get references for dget and mntget, will be released + * in error path of *_open(). + */ + ret = spufs_context_open(dget(dentry), mntget(nd->mnt)); + if (ret < 0) + spufs_rmdir(nd->dentry->d_inode, dentry); + +out_dput: + dput(dentry); +out_dir: + up(&nd->dentry->d_inode->i_sem); +out: + return ret; +} + +/* File system initialization */ +enum { + Opt_uid, Opt_gid, Opt_err, +}; + +static match_table_t spufs_tokens = { + { Opt_uid, "uid=%d" }, + { Opt_gid, "gid=%d" }, + { Opt_err, NULL }, +}; + +static int +spufs_parse_options(char *options, struct inode *root) +{ + char *p; + substring_t args[MAX_OPT_ARGS]; + + while ((p = strsep(&options, ",")) != NULL) { + int token, option; + + if (!*p) + continue; + + token = match_token(p, spufs_tokens, args); + switch (token) { + case Opt_uid: + if (match_int(&args[0], &option)) + return 0; + root->i_uid = option; + break; + case Opt_gid: + if (match_int(&args[0], &option)) + return 0; + root->i_gid = option; + break; + default: + return 0; + } + } + return 1; +} + +static int +spufs_create_root(struct super_block *sb, void *data) +{ + struct inode *inode; + int ret; + + ret = -ENOMEM; + inode = spufs_new_inode(sb, S_IFDIR | 0775); + if (!inode) + goto out; + + inode->i_op = &spufs_dir_inode_operations; + inode->i_fop = &simple_dir_operations; + SPUFS_I(inode)->i_ctx = NULL; + + ret = -EINVAL; + if (!spufs_parse_options(data, inode)) + goto out_iput; + + ret = -ENOMEM; + sb->s_root = d_alloc_root(inode); + if (!sb->s_root) + goto out_iput; + + return 0; +out_iput: + iput(inode); +out: + return ret; +} + +static int +spufs_fill_super(struct super_block *sb, void *data, int silent) +{ + static struct super_operations s_ops = { + .alloc_inode = spufs_alloc_inode, + .destroy_inode = spufs_destroy_inode, + .statfs = simple_statfs, + .delete_inode = spufs_delete_inode, + .drop_inode = generic_delete_inode, + }; + + sb->s_maxbytes = MAX_LFS_FILESIZE; + sb->s_blocksize = PAGE_CACHE_SIZE; + sb->s_blocksize_bits = PAGE_CACHE_SHIFT; + sb->s_magic = SPUFS_MAGIC; + sb->s_op = &s_ops; + + return spufs_create_root(sb, data); +} + +static struct super_block * +spufs_get_sb(struct file_system_type *fstype, int flags, + const char *name, void *data) +{ + return get_sb_single(fstype, flags, data, spufs_fill_super); +} + +static struct file_system_type spufs_type = { + .owner = THIS_MODULE, + .name = "spufs", + .get_sb = spufs_get_sb, + .kill_sb = kill_litter_super, +}; + +static int spufs_init(void) +{ + int ret; + ret = -ENOMEM; + spufs_inode_cache = kmem_cache_create("spufs_inode_cache", + sizeof(struct spufs_inode_info), 0, + SLAB_HWCACHE_ALIGN, spufs_init_once, NULL); + + if (!spufs_inode_cache) + goto out; + if (spu_sched_init() != 0) { + kmem_cache_destroy(spufs_inode_cache); + goto out; + } + ret = register_filesystem(&spufs_type); + if (ret) + goto out_cache; + ret = register_spu_syscalls(&spufs_calls); + if (ret) + goto out_fs; + return 0; +out_fs: + unregister_filesystem(&spufs_type); +out_cache: + kmem_cache_destroy(spufs_inode_cache); +out: + return ret; +} +module_init(spufs_init); + +static void spufs_exit(void) +{ + spu_sched_exit(); + unregister_spu_syscalls(&spufs_calls); + unregister_filesystem(&spufs_type); + kmem_cache_destroy(spufs_inode_cache); +} +module_exit(spufs_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Arnd Bergmann <arndb@de.ibm.com>"); + diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c new file mode 100644 index 0000000..18ea886 --- /dev/null +++ b/arch/powerpc/platforms/cell/spufs/run.c @@ -0,0 +1,131 @@ +#include <linux/wait.h> +#include <linux/ptrace.h> + +#include <asm/spu.h> + +#include "spufs.h" + +/* interrupt-level stop callback function. */ +void spufs_stop_callback(struct spu *spu) +{ + struct spu_context *ctx = spu->ctx; + + wake_up_all(&ctx->stop_wq); +} + +static inline int spu_stopped(struct spu_context *ctx, u32 * stat) +{ + struct spu *spu; + u64 pte_fault; + + *stat = ctx->ops->status_read(ctx); + if (ctx->state != SPU_STATE_RUNNABLE) + return 1; + spu = ctx->spu; + pte_fault = spu->dsisr & + (MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED); + return (!(*stat & 0x1) || pte_fault || spu->class_0_pending) ? 1 : 0; +} + +static inline int spu_run_init(struct spu_context *ctx, u32 * npc, + u32 * status) +{ + int ret; + + if ((ret = spu_acquire_runnable(ctx)) != 0) + return ret; + ctx->ops->npc_write(ctx, *npc); + ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_RUNNABLE); + return 0; +} + +static inline int spu_run_fini(struct spu_context *ctx, u32 * npc, + u32 * status) +{ + int ret = 0; + + *status = ctx->ops->status_read(ctx); + *npc = ctx->ops->npc_read(ctx); + spu_release(ctx); + + if (signal_pending(current)) + ret = -ERESTARTSYS; + if (unlikely(current->ptrace & PT_PTRACED)) { + if ((*status & SPU_STATUS_STOPPED_BY_STOP) + && (*status >> SPU_STOP_STATUS_SHIFT) == 0x3fff) { + force_sig(SIGTRAP, current); + ret = -ERESTARTSYS; + } + } + return ret; +} + +static inline int spu_reacquire_runnable(struct spu_context *ctx, u32 *npc, + u32 *status) +{ + int ret; + + if ((ret = spu_run_fini(ctx, npc, status)) != 0) + return ret; + if (*status & (SPU_STATUS_STOPPED_BY_STOP | + SPU_STATUS_STOPPED_BY_HALT)) { + return *status; + } + if ((ret = spu_run_init(ctx, npc, status)) != 0) + return ret; + return 0; +} + +static inline int spu_process_events(struct spu_context *ctx) +{ + struct spu *spu = ctx->spu; + u64 pte_fault = MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED; + int ret = 0; + + if (spu->dsisr & pte_fault) + ret = spu_irq_class_1_bottom(spu); + if (spu->class_0_pending) + ret = spu_irq_class_0_bottom(spu); + if (!ret && signal_pending(current)) + ret = -ERESTARTSYS; + return ret; +} + +long spufs_run_spu(struct file *file, struct spu_context *ctx, + u32 * npc, u32 * status) +{ + int ret; + + if (down_interruptible(&ctx->run_sema)) + return -ERESTARTSYS; + + ret = spu_run_init(ctx, npc, status); + if (ret) + goto out; + + do { + ret = spufs_wait(ctx->stop_wq, spu_stopped(ctx, status)); + if (unlikely(ret)) + break; + if (unlikely(ctx->state != SPU_STATE_RUNNABLE)) { + ret = spu_reacquire_runnable(ctx, npc, status); + if (ret) + goto out; + continue; + } + ret = spu_process_events(ctx); + + } while (!ret && !(*status & (SPU_STATUS_STOPPED_BY_STOP | + SPU_STATUS_STOPPED_BY_HALT))); + + ctx->ops->runcntl_stop(ctx); + ret = spu_run_fini(ctx, npc, status); + if (!ret) + ret = *status; + spu_yield(ctx); + +out: + up(&ctx->run_sema); + return ret; +} + diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c new file mode 100644 index 0000000..963182f --- /dev/null +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -0,0 +1,461 @@ +/* sched.c - SPU scheduler. + * + * Copyright (C) IBM 2005 + * Author: Mark Nutter <mnutter@us.ibm.com> + * + * SPU scheduler, based on Linux thread priority. For now use + * a simple "cooperative" yield model with no preemption. SPU + * scheduling will eventually be preemptive: When a thread with + * a higher static priority gets ready to run, then an active SPU + * context will be preempted and returned to the waitq. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#undef DEBUG + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/completion.h> +#include <linux/vmalloc.h> +#include <linux/smp.h> +#include <linux/smp_lock.h> +#include <linux/stddef.h> +#include <linux/unistd.h> + +#include <asm/io.h> +#include <asm/mmu_context.h> +#include <asm/spu.h> +#include <asm/spu_csa.h> +#include "spufs.h" + +#define SPU_MIN_TIMESLICE (100 * HZ / 1000) + +#define SPU_BITMAP_SIZE (((MAX_PRIO+BITS_PER_LONG)/BITS_PER_LONG)+1) +struct spu_prio_array { + atomic_t nr_blocked; + unsigned long bitmap[SPU_BITMAP_SIZE]; + wait_queue_head_t waitq[MAX_PRIO]; +}; + +/* spu_runqueue - This is the main runqueue data structure for SPUs. */ +struct spu_runqueue { + struct semaphore sem; + unsigned long nr_active; + unsigned long nr_idle; + unsigned long nr_switches; + struct list_head active_list; + struct list_head idle_list; + struct spu_prio_array prio; +}; + +static struct spu_runqueue *spu_runqueues = NULL; + +static inline struct spu_runqueue *spu_rq(void) +{ + /* Future: make this a per-NODE array, + * and use cpu_to_node(smp_processor_id()) + */ + return spu_runqueues; +} + +static inline struct spu *del_idle(struct spu_runqueue *rq) +{ + struct spu *spu; + + BUG_ON(rq->nr_idle <= 0); + BUG_ON(list_empty(&rq->idle_list)); + /* Future: Move SPU out of low-power SRI state. */ + spu = list_entry(rq->idle_list.next, struct spu, sched_list); + list_del_init(&spu->sched_list); + rq->nr_idle--; + return spu; +} + +static inline void del_active(struct spu_runqueue *rq, struct spu *spu) +{ + BUG_ON(rq->nr_active <= 0); + BUG_ON(list_empty(&rq->active_list)); + list_del_init(&spu->sched_list); + rq->nr_active--; +} + +static inline void add_idle(struct spu_runqueue *rq, struct spu *spu) +{ + /* Future: Put SPU into low-power SRI state. */ + list_add_tail(&spu->sched_list, &rq->idle_list); + rq->nr_idle++; +} + +static inline void add_active(struct spu_runqueue *rq, struct spu *spu) +{ + rq->nr_active++; + rq->nr_switches++; + list_add_tail(&spu->sched_list, &rq->active_list); +} + +static void prio_wakeup(struct spu_runqueue *rq) +{ + if (atomic_read(&rq->prio.nr_blocked) && rq->nr_idle) { + int best = sched_find_first_bit(rq->prio.bitmap); + if (best < MAX_PRIO) { + wait_queue_head_t *wq = &rq->prio.waitq[best]; + wake_up_interruptible_nr(wq, 1); + } + } +} + +static void prio_wait(struct spu_runqueue *rq, struct spu_context *ctx, + u64 flags) +{ + int prio = current->prio; + wait_queue_head_t *wq = &rq->prio.waitq[prio]; + DEFINE_WAIT(wait); + + __set_bit(prio, rq->prio.bitmap); + atomic_inc(&rq->prio.nr_blocked); + prepare_to_wait_exclusive(wq, &wait, TASK_INTERRUPTIBLE); + if (!signal_pending(current)) { + up(&rq->sem); + up_write(&ctx->state_sema); + pr_debug("%s: pid=%d prio=%d\n", __FUNCTION__, + current->pid, current->prio); + schedule(); + down_write(&ctx->state_sema); + down(&rq->sem); + } + finish_wait(wq, &wait); + atomic_dec(&rq->prio.nr_blocked); + if (!waitqueue_active(wq)) + __clear_bit(prio, rq->prio.bitmap); +} + +static inline int is_best_prio(struct spu_runqueue *rq) +{ + int best_prio; + + best_prio = sched_find_first_bit(rq->prio.bitmap); + return (current->prio < best_prio) ? 1 : 0; +} + +static inline void mm_needs_global_tlbie(struct mm_struct *mm) +{ + /* Global TLBIE broadcast required with SPEs. */ +#if (NR_CPUS > 1) + __cpus_setall(&mm->cpu_vm_mask, NR_CPUS); +#else + __cpus_setall(&mm->cpu_vm_mask, NR_CPUS+1); /* is this ok? */ +#endif +} + +static inline void bind_context(struct spu *spu, struct spu_context *ctx) +{ + pr_debug("%s: pid=%d SPU=%d\n", __FUNCTION__, current->pid, + spu->number); + spu->ctx = ctx; + spu->flags = 0; + ctx->flags = 0; + ctx->spu = spu; + ctx->ops = &spu_hw_ops; + spu->pid = current->pid; + spu->prio = current->prio; + spu->mm = ctx->owner; + mm_needs_global_tlbie(spu->mm); + spu->ibox_callback = spufs_ibox_callback; + spu->wbox_callback = spufs_wbox_callback; + spu->stop_callback = spufs_stop_callback; + mb(); + spu_unmap_mappings(ctx); + spu_restore(&ctx->csa, spu); + spu->timestamp = jiffies; +} + +static inline void unbind_context(struct spu *spu, struct spu_context *ctx) +{ + pr_debug("%s: unbind pid=%d SPU=%d\n", __FUNCTION__, + spu->pid, spu->number); + spu_unmap_mappings(ctx); + spu_save(&ctx->csa, spu); + spu->timestamp = jiffies; + ctx->state = SPU_STATE_SAVED; + spu->ibox_callback = NULL; + spu->wbox_callback = NULL; + spu->stop_callback = NULL; + spu->mm = NULL; + spu->pid = 0; + spu->prio = MAX_PRIO; + ctx->ops = &spu_backing_ops; + ctx->spu = NULL; + ctx->flags = 0; + spu->flags = 0; + spu->ctx = NULL; +} + +static void spu_reaper(void *data) +{ + struct spu_context *ctx = data; + struct spu *spu; + + down_write(&ctx->state_sema); + spu = ctx->spu; + if (spu && test_bit(SPU_CONTEXT_PREEMPT, &ctx->flags)) { + if (atomic_read(&spu->rq->prio.nr_blocked)) { + pr_debug("%s: spu=%d\n", __func__, spu->number); + ctx->ops->runcntl_stop(ctx); + spu_deactivate(ctx); + wake_up_all(&ctx->stop_wq); + } else { + clear_bit(SPU_CONTEXT_PREEMPT, &ctx->flags); + } + } + up_write(&ctx->state_sema); + put_spu_context(ctx); +} + +static void schedule_spu_reaper(struct spu_runqueue *rq, struct spu *spu) +{ + struct spu_context *ctx = get_spu_context(spu->ctx); + unsigned long now = jiffies; + unsigned long expire = spu->timestamp + SPU_MIN_TIMESLICE; + + set_bit(SPU_CONTEXT_PREEMPT, &ctx->flags); + INIT_WORK(&ctx->reap_work, spu_reaper, ctx); + if (time_after(now, expire)) + schedule_work(&ctx->reap_work); + else + schedule_delayed_work(&ctx->reap_work, expire - now); +} + +static void check_preempt_active(struct spu_runqueue *rq) +{ + struct list_head *p; + struct spu *worst = NULL; + + list_for_each(p, &rq->active_list) { + struct spu *spu = list_entry(p, struct spu, sched_list); + struct spu_context *ctx = spu->ctx; + if (!test_bit(SPU_CONTEXT_PREEMPT, &ctx->flags)) { + if (!worst || (spu->prio > worst->prio)) { + worst = spu; + } + } + } + if (worst && (current->prio < worst->prio)) + schedule_spu_reaper(rq, worst); +} + +static struct spu *get_idle_spu(struct spu_context *ctx, u64 flags) +{ + struct spu_runqueue *rq; + struct spu *spu = NULL; + + rq = spu_rq(); + down(&rq->sem); + for (;;) { + if (rq->nr_idle > 0) { + if (is_best_prio(rq)) { + /* Fall through. */ + spu = del_idle(rq); + break; + } else { + prio_wakeup(rq); + up(&rq->sem); + yield(); + if (signal_pending(current)) { + return NULL; + } + rq = spu_rq(); + down(&rq->sem); + continue; + } + } else { + check_preempt_active(rq); + prio_wait(rq, ctx, flags); + if (signal_pending(current)) { + prio_wakeup(rq); + spu = NULL; + break; + } + continue; + } + } + up(&rq->sem); + return spu; +} + +static void put_idle_spu(struct spu *spu) +{ + struct spu_runqueue *rq = spu->rq; + + down(&rq->sem); + add_idle(rq, spu); + prio_wakeup(rq); + up(&rq->sem); +} + +static int get_active_spu(struct spu *spu) +{ + struct spu_runqueue *rq = spu->rq; + struct list_head *p; + struct spu *tmp; + int rc = 0; + + down(&rq->sem); + list_for_each(p, &rq->active_list) { + tmp = list_entry(p, struct spu, sched_list); + if (tmp == spu) { + del_active(rq, spu); + rc = 1; + break; + } + } + up(&rq->sem); + return rc; +} + +static void put_active_spu(struct spu *spu) +{ + struct spu_runqueue *rq = spu->rq; + + down(&rq->sem); + add_active(rq, spu); + up(&rq->sem); +} + +/* Lock order: + * spu_activate() & spu_deactivate() require the + * caller to have down_write(&ctx->state_sema). + * + * The rq->sem is breifly held (inside or outside a + * given ctx lock) for list management, but is never + * held during save/restore. + */ + +int spu_activate(struct spu_context *ctx, u64 flags) +{ + struct spu *spu; + + if (ctx->spu) + return 0; + spu = get_idle_spu(ctx, flags); + if (!spu) + return (signal_pending(current)) ? -ERESTARTSYS : -EAGAIN; + bind_context(spu, ctx); + /* + * We're likely to wait for interrupts on the same + * CPU that we are now on, so send them here. + */ + spu_irq_setaffinity(spu, raw_smp_processor_id()); + put_active_spu(spu); + return 0; +} + +void spu_deactivate(struct spu_context *ctx) +{ + struct spu *spu; + int needs_idle; + + spu = ctx->spu; + if (!spu) + return; + needs_idle = get_active_spu(spu); + unbind_context(spu, ctx); + if (needs_idle) + put_idle_spu(spu); +} + +void spu_yield(struct spu_context *ctx) +{ + struct spu *spu; + int need_yield = 0; + + down_write(&ctx->state_sema); + spu = ctx->spu; + if (spu && (sched_find_first_bit(spu->rq->prio.bitmap) < MAX_PRIO)) { + pr_debug("%s: yielding SPU %d\n", __FUNCTION__, spu->number); + spu_deactivate(ctx); + ctx->state = SPU_STATE_SAVED; + need_yield = 1; + } else if (spu) { + spu->prio = MAX_PRIO; + } + up_write(&ctx->state_sema); + if (unlikely(need_yield)) + yield(); +} + +int __init spu_sched_init(void) +{ + struct spu_runqueue *rq; + struct spu *spu; + int i; + + rq = spu_runqueues = kmalloc(sizeof(struct spu_runqueue), GFP_KERNEL); + if (!rq) { + printk(KERN_WARNING "%s: Unable to allocate runqueues.\n", + __FUNCTION__); + return 1; + } + memset(rq, 0, sizeof(struct spu_runqueue)); + init_MUTEX(&rq->sem); + INIT_LIST_HEAD(&rq->active_list); + INIT_LIST_HEAD(&rq->idle_list); + rq->nr_active = 0; + rq->nr_idle = 0; + rq->nr_switches = 0; + atomic_set(&rq->prio.nr_blocked, 0); + for (i = 0; i < MAX_PRIO; i++) { + init_waitqueue_head(&rq->prio.waitq[i]); + __clear_bit(i, rq->prio.bitmap); + } + __set_bit(MAX_PRIO, rq->prio.bitmap); + for (;;) { + spu = spu_alloc(); + if (!spu) + break; + pr_debug("%s: adding SPU[%d]\n", __FUNCTION__, spu->number); + add_idle(rq, spu); + spu->rq = rq; + spu->timestamp = jiffies; + } + if (!rq->nr_idle) { + printk(KERN_WARNING "%s: No available SPUs.\n", __FUNCTION__); + kfree(rq); + return 1; + } + return 0; +} + +void __exit spu_sched_exit(void) +{ + struct spu_runqueue *rq = spu_rq(); + struct spu *spu; + + if (!rq) { + printk(KERN_WARNING "%s: no runqueues!\n", __FUNCTION__); + return; + } + while (rq->nr_idle > 0) { + spu = del_idle(rq); + if (!spu) + break; + spu_free(spu); + } + kfree(rq); +} diff --git a/arch/powerpc/platforms/cell/spufs/spu_restore.c b/arch/powerpc/platforms/cell/spufs/spu_restore.c new file mode 100644 index 0000000..0bf723d --- /dev/null +++ b/arch/powerpc/platforms/cell/spufs/spu_restore.c @@ -0,0 +1,336 @@ +/* + * spu_restore.c + * + * (C) Copyright IBM Corp. 2005 + * + * SPU-side context restore sequence outlined in + * Synergistic Processor Element Book IV + * + * Author: Mark Nutter <mnutter@us.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + + +#ifndef LS_SIZE +#define LS_SIZE 0x40000 /* 256K (in bytes) */ +#endif + +typedef unsigned int u32; +typedef unsigned long long u64; + +#include <spu_intrinsics.h> +#include <asm/spu_csa.h> +#include "spu_utils.h" + +#define BR_INSTR 0x327fff80 /* br -4 */ +#define NOP_INSTR 0x40200000 /* nop */ +#define HEQ_INSTR 0x7b000000 /* heq $0, $0 */ +#define STOP_INSTR 0x00000000 /* stop 0x0 */ +#define ILLEGAL_INSTR 0x00800000 /* illegal instr */ +#define RESTORE_COMPLETE 0x00003ffc /* stop 0x3ffc */ + +static inline void fetch_regs_from_mem(addr64 lscsa_ea) +{ + unsigned int ls = (unsigned int)®s_spill[0]; + unsigned int size = sizeof(regs_spill); + unsigned int tag_id = 0; + unsigned int cmd = 0x40; /* GET */ + + spu_writech(MFC_LSA, ls); + spu_writech(MFC_EAH, lscsa_ea.ui[0]); + spu_writech(MFC_EAL, lscsa_ea.ui[1]); + spu_writech(MFC_Size, size); + spu_writech(MFC_TagID, tag_id); + spu_writech(MFC_Cmd, cmd); +} + +static inline void restore_upper_240kb(addr64 lscsa_ea) +{ + unsigned int ls = 16384; + unsigned int list = (unsigned int)&dma_list[0]; + unsigned int size = sizeof(dma_list); + unsigned int tag_id = 0; + unsigned int cmd = 0x44; /* GETL */ + + /* Restore, Step 4: + * Enqueue the GETL command (tag 0) to the MFC SPU command + * queue to transfer the upper 240 kb of LS from CSA. + */ + spu_writech(MFC_LSA, ls); + spu_writech(MFC_EAH, lscsa_ea.ui[0]); + spu_writech(MFC_EAL, list); + spu_writech(MFC_Size, size); + spu_writech(MFC_TagID, tag_id); + spu_writech(MFC_Cmd, cmd); +} + +static inline void restore_decr(void) +{ + unsigned int offset; + unsigned int decr_running; + unsigned int decr; + + /* Restore, Step 6: + * If the LSCSA "decrementer running" flag is set + * then write the SPU_WrDec channel with the + * decrementer value from LSCSA. + */ + offset = LSCSA_QW_OFFSET(decr_status); + decr_running = regs_spill[offset].slot[0]; + if (decr_running) { + offset = LSCSA_QW_OFFSET(decr); + decr = regs_spill[offset].slot[0]; + spu_writech(SPU_WrDec, decr); + } +} + +static inline void write_ppu_mb(void) +{ + unsigned int offset; + unsigned int data; + + /* Restore, Step 11: + * Write the MFC_WrOut_MB channel with the PPU_MB + * data from LSCSA. + */ + offset = LSCSA_QW_OFFSET(ppu_mb); + data = regs_spill[offset].slot[0]; + spu_writech(SPU_WrOutMbox, data); +} + +static inline void write_ppuint_mb(void) +{ + unsigned int offset; + unsigned int data; + + /* Restore, Step 12: + * Write the MFC_WrInt_MB channel with the PPUINT_MB + * data from LSCSA. + */ + offset = LSCSA_QW_OFFSET(ppuint_mb); + data = regs_spill[offset].slot[0]; + spu_writech(SPU_WrOutIntrMbox, data); +} + +static inline void restore_fpcr(void) +{ + unsigned int offset; + vector unsigned int fpcr; + + /* Restore, Step 13: + * Restore the floating-point status and control + * register from the LSCSA. + */ + offset = LSCSA_QW_OFFSET(fpcr); + fpcr = regs_spill[offset].v; + spu_mtfpscr(fpcr); +} + +static inline void restore_srr0(void) +{ + unsigned int offset; + unsigned int srr0; + + /* Restore, Step 14: + * Restore the SPU SRR0 data from the LSCSA. + */ + offset = LSCSA_QW_OFFSET(srr0); + srr0 = regs_spill[offset].slot[0]; + spu_writech(SPU_WrSRR0, srr0); +} + +static inline void restore_event_mask(void) +{ + unsigned int offset; + unsigned int event_mask; + + /* Restore, Step 15: + * Restore the SPU_RdEventMsk data from the LSCSA. + */ + offset = LSCSA_QW_OFFSET(event_mask); + event_mask = regs_spill[offset].slot[0]; + spu_writech(SPU_WrEventMask, event_mask); +} + +static inline void restore_tag_mask(void) +{ + unsigned int offset; + unsigned int tag_mask; + + /* Restore, Step 16: + * Restore the SPU_RdTagMsk data from the LSCSA. + */ + offset = LSCSA_QW_OFFSET(tag_mask); + tag_mask = regs_spill[offset].slot[0]; + spu_writech(MFC_WrTagMask, tag_mask); +} + +static inline void restore_complete(void) +{ + extern void exit_fini(void); + unsigned int *exit_instrs = (unsigned int *)exit_fini; + unsigned int offset; + unsigned int stopped_status; + unsigned int stopped_code; + + /* Restore, Step 18: + * Issue a stop-and-signal instruction with + * "good context restore" signal value. + * + * Restore, Step 19: + * There may be additional instructions placed + * here by the PPE Sequence for SPU Context + * Restore in order to restore the correct + * "stopped state". + * + * This step is handled here by analyzing the + * LSCSA.stopped_status and then modifying the + * exit() function to behave appropriately. + */ + + offset = LSCSA_QW_OFFSET(stopped_status); + stopped_status = regs_spill[offset].slot[0]; + stopped_code = regs_spill[offset].slot[1]; + + switch (stopped_status) { + case SPU_STOPPED_STATUS_P_I: + /* SPU_Status[P,I]=1. Add illegal instruction + * followed by stop-and-signal instruction after + * end of restore code. + */ + exit_instrs[0] = RESTORE_COMPLETE; + exit_instrs[1] = ILLEGAL_INSTR; + exit_instrs[2] = STOP_INSTR | stopped_code; + break; + case SPU_STOPPED_STATUS_P_H: + /* SPU_Status[P,H]=1. Add 'heq $0, $0' followed + * by stop-and-signal instruction after end of + * restore code. + */ + exit_instrs[0] = RESTORE_COMPLETE; + exit_instrs[1] = HEQ_INSTR; + exit_instrs[2] = STOP_INSTR | stopped_code; + break; + case SPU_STOPPED_STATUS_S_P: + /* SPU_Status[S,P]=1. Add nop instruction + * followed by 'br -4' after end of restore + * code. + */ + exit_instrs[0] = RESTORE_COMPLETE; + exit_instrs[1] = STOP_INSTR | stopped_code; + exit_instrs[2] = NOP_INSTR; + exit_instrs[3] = BR_INSTR; + break; + case SPU_STOPPED_STATUS_S_I: + /* SPU_Status[S,I]=1. Add illegal instruction + * followed by 'br -4' after end of restore code. + */ + exit_instrs[0] = RESTORE_COMPLETE; + exit_instrs[1] = ILLEGAL_INSTR; + exit_instrs[2] = NOP_INSTR; + exit_instrs[3] = BR_INSTR; + break; + case SPU_STOPPED_STATUS_I: + /* SPU_Status[I]=1. Add illegal instruction followed + * by infinite loop after end of restore sequence. + */ + exit_instrs[0] = RESTORE_COMPLETE; + exit_instrs[1] = ILLEGAL_INSTR; + exit_instrs[2] = NOP_INSTR; + exit_instrs[3] = BR_INSTR; + break; + case SPU_STOPPED_STATUS_S: + /* SPU_Status[S]=1. Add two 'nop' instructions. */ + exit_instrs[0] = RESTORE_COMPLETE; + exit_instrs[1] = NOP_INSTR; + exit_instrs[2] = NOP_INSTR; + exit_instrs[3] = BR_INSTR; + break; + case SPU_STOPPED_STATUS_H: + /* SPU_Status[H]=1. Add 'heq $0, $0' instruction + * after end of restore code. + */ + exit_instrs[0] = RESTORE_COMPLETE; + exit_instrs[1] = HEQ_INSTR; + exit_instrs[2] = NOP_INSTR; + exit_instrs[3] = BR_INSTR; + break; + case SPU_STOPPED_STATUS_P: + /* SPU_Status[P]=1. Add stop-and-signal instruction + * after end of restore code. + */ + exit_instrs[0] = RESTORE_COMPLETE; + exit_instrs[1] = STOP_INSTR | stopped_code; + break; + case SPU_STOPPED_STATUS_R: + /* SPU_Status[I,S,H,P,R]=0. Add infinite loop. */ + exit_instrs[0] = RESTORE_COMPLETE; + exit_instrs[1] = NOP_INSTR; + exit_instrs[2] = NOP_INSTR; + exit_instrs[3] = BR_INSTR; + break; + default: + /* SPU_Status[R]=1. No additonal instructions. */ + break; + } + spu_sync(); +} + +/** + * main - entry point for SPU-side context restore. + * + * This code deviates from the documented sequence in the + * following aspects: + * + * 1. The EA for LSCSA is passed from PPE in the + * signal notification channels. + * 2. The register spill area is pulled by SPU + * into LS, rather than pushed by PPE. + * 3. All 128 registers are restored by exit(). + * 4. The exit() function is modified at run + * time in order to properly restore the + * SPU_Status register. + */ +int main() +{ + addr64 lscsa_ea; + + lscsa_ea.ui[0] = spu_readch(SPU_RdSigNotify1); + lscsa_ea.ui[1] = spu_readch(SPU_RdSigNotify2); + fetch_regs_from_mem(lscsa_ea); + + set_event_mask(); /* Step 1. */ + set_tag_mask(); /* Step 2. */ + build_dma_list(lscsa_ea); /* Step 3. */ + restore_upper_240kb(lscsa_ea); /* Step 4. */ + /* Step 5: done by 'exit'. */ + restore_decr(); /* Step 6. */ + enqueue_putllc(lscsa_ea); /* Step 7. */ + set_tag_update(); /* Step 8. */ + read_tag_status(); /* Step 9. */ + read_llar_status(); /* Step 10. */ + write_ppu_mb(); /* Step 11. */ + write_ppuint_mb(); /* Step 12. */ + restore_fpcr(); /* Step 13. */ + restore_srr0(); /* Step 14. */ + restore_event_mask(); /* Step 15. */ + restore_tag_mask(); /* Step 16. */ + /* Step 17. done by 'exit'. */ + restore_complete(); /* Step 18. */ + + return 0; +} diff --git a/arch/powerpc/platforms/cell/spufs/spu_restore_crt0.S b/arch/powerpc/platforms/cell/spufs/spu_restore_crt0.S new file mode 100644 index 0000000..2905949 --- /dev/null +++ b/arch/powerpc/platforms/cell/spufs/spu_restore_crt0.S @@ -0,0 +1,116 @@ +/* + * crt0_r.S: Entry function for SPU-side context restore. + * + * Copyright (C) 2005 IBM + * + * Entry and exit function for SPU-side of the context restore + * sequence. Sets up an initial stack frame, then branches to + * 'main'. On return, restores all 128 registers from the LSCSA + * and exits. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <asm/spu_csa.h> + +.data +.align 7 +.globl regs_spill +regs_spill: +.space SIZEOF_SPU_SPILL_REGS, 0x0 + +.text +.global _start +_start: + /* Initialize the stack pointer to point to 16368 + * (16kb-16). The back chain pointer is initialized + * to NULL. + */ + il $0, 0 + il $SP, 16368 + stqd $0, 0($SP) + + /* Allocate a minimum stack frame for the called main. + * This is needed so that main has a place to save the + * link register when it calls another function. + */ + stqd $SP, -160($SP) + ai $SP, $SP, -160 + + /* Call the program's main function. */ + brsl $0, main + +.global exit +.global _exit +exit: +_exit: + /* SPU Context Restore, Step 5: Restore the remaining 112 GPRs. */ + ila $3, regs_spill + 256 +restore_regs: + lqr $4, restore_reg_insts +restore_reg_loop: + ai $4, $4, 4 + .balignl 16, 0x40200000 +restore_reg_insts: /* must be quad-word aligned. */ + lqd $16, 0($3) + lqd $17, 16($3) + lqd $18, 32($3) + lqd $19, 48($3) + andi $5, $4, 0x7F + stqr $4, restore_reg_insts + ai $3, $3, 64 + brnz $5, restore_reg_loop + + /* SPU Context Restore Step 17: Restore the first 16 GPRs. */ + lqa $0, regs_spill + 0 + lqa $1, regs_spill + 16 + lqa $2, regs_spill + 32 + lqa $3, regs_spill + 48 + lqa $4, regs_spill + 64 + lqa $5, regs_spill + 80 + lqa $6, regs_spill + 96 + lqa $7, regs_spill + 112 + lqa $8, regs_spill + 128 + lqa $9, regs_spill + 144 + lqa $10, regs_spill + 160 + lqa $11, regs_spill + 176 + lqa $12, regs_spill + 192 + lqa $13, regs_spill + 208 + lqa $14, regs_spill + 224 + lqa $15, regs_spill + 240 + + /* Under normal circumstances, the 'exit' function + * terminates with 'stop SPU_RESTORE_COMPLETE', + * indicating that the SPU-side restore code has + * completed. + * + * However it is possible that instructions immediately + * following the 'stop 0x3ffc' have been modified at run + * time so as to recreate the exact SPU_Status settings + * from the application, e.g. illegal instruciton, halt, + * etc. + */ +.global exit_fini +.global _exit_fini +exit_fini: +_exit_fini: + stop SPU_RESTORE_COMPLETE + stop 0 + stop 0 + stop 0 + + /* Pad the size of this crt0.o to be multiple of 16 bytes. */ +.balignl 16, 0x0 diff --git a/arch/powerpc/platforms/cell/spufs/spu_restore_dump.h_shipped b/arch/powerpc/platforms/cell/spufs/spu_restore_dump.h_shipped new file mode 100644 index 0000000..1b2355f --- /dev/null +++ b/arch/powerpc/platforms/cell/spufs/spu_restore_dump.h_shipped @@ -0,0 +1,231 @@ +/* + * spu_restore_dump.h: Copyright (C) 2005 IBM. + * Hex-dump auto generated from spu_restore.c. + * Do not edit! + */ +static unsigned int spu_restore_code[] __page_aligned = { +0x40800000, 0x409ff801, 0x24000080, 0x24fd8081, +0x1cd80081, 0x33001180, 0x42030003, 0x33800284, +0x1c010204, 0x40200000, 0x40200000, 0x40200000, +0x34000190, 0x34004191, 0x34008192, 0x3400c193, +0x141fc205, 0x23fffd84, 0x1c100183, 0x217ffa85, +0x3080a000, 0x3080a201, 0x3080a402, 0x3080a603, +0x3080a804, 0x3080aa05, 0x3080ac06, 0x3080ae07, +0x3080b008, 0x3080b209, 0x3080b40a, 0x3080b60b, +0x3080b80c, 0x3080ba0d, 0x3080bc0e, 0x3080be0f, +0x00003ffc, 0x00000000, 0x00000000, 0x00000000, +0x01a00182, 0x3ec00083, 0xb0a14103, 0x01a00204, +0x3ec10082, 0x4202800e, 0x04000703, 0xb0a14202, +0x21a00803, 0x3fbf028d, 0x3f20068d, 0x3fbe0682, +0x3fe30102, 0x21a00882, 0x3f82028f, 0x3fe3078f, +0x3fbf0784, 0x3f200204, 0x3fbe0204, 0x3fe30204, +0x04000203, 0x21a00903, 0x40848002, 0x21a00982, +0x40800003, 0x21a00a03, 0x40802002, 0x21a00a82, +0x21a00083, 0x40800082, 0x21a00b02, 0x10002818, +0x40a80002, 0x32800007, 0x4207000c, 0x18008208, +0x40a0000b, 0x4080020a, 0x40800709, 0x00200000, +0x42070002, 0x3ac30384, 0x1cffc489, 0x00200000, +0x18008383, 0x38830382, 0x4cffc486, 0x3ac28185, +0xb0408584, 0x28830382, 0x1c020387, 0x38828182, +0xb0408405, 0x1802c408, 0x28828182, 0x217ff886, +0x04000583, 0x21a00803, 0x3fbe0682, 0x3fe30102, +0x04000106, 0x21a00886, 0x04000603, 0x21a00903, +0x40803c02, 0x21a00982, 0x40800003, 0x04000184, +0x21a00a04, 0x40802202, 0x21a00a82, 0x42028005, +0x34208702, 0x21002282, 0x21a00804, 0x21a00886, +0x3fbf0782, 0x3f200102, 0x3fbe0102, 0x3fe30102, +0x21a00902, 0x40804003, 0x21a00983, 0x21a00a04, +0x40805a02, 0x21a00a82, 0x40800083, 0x21a00b83, +0x01a00c02, 0x01a00d83, 0x3420c282, 0x21a00e02, +0x34210283, 0x21a00f03, 0x34200284, 0x77400200, +0x3421c282, 0x21a00702, 0x34218283, 0x21a00083, +0x34214282, 0x21a00b02, 0x4200480c, 0x00200000, +0x1c010286, 0x34220284, 0x34220302, 0x0f608203, +0x5c024204, 0x3b81810b, 0x42013c02, 0x00200000, +0x18008185, 0x38808183, 0x3b814182, 0x21004e84, +0x4020007f, 0x35000100, 0x000004e0, 0x000002a0, +0x000002e8, 0x00000428, 0x00000360, 0x000002e8, +0x000004a0, 0x00000468, 0x000003c8, 0x00000360, +0x409ffe02, 0x30801203, 0x40800204, 0x3ec40085, +0x10009c09, 0x3ac10606, 0xb060c105, 0x4020007f, +0x4020007f, 0x20801203, 0x38810602, 0xb0408586, +0x28810602, 0x32004180, 0x34204702, 0x21a00382, +0x4020007f, 0x327fdc80, 0x409ffe02, 0x30801203, +0x40800204, 0x3ec40087, 0x40800405, 0x00200000, +0x40800606, 0x3ac10608, 0x3ac14609, 0x3ac1860a, +0xb060c107, 0x20801203, 0x41004003, 0x38810602, +0x4020007f, 0xb0408188, 0x4020007f, 0x28810602, +0x41201002, 0x38814603, 0x10009c09, 0xb060c109, +0x4020007f, 0x28814603, 0x41193f83, 0x38818602, +0x60ffc003, 0xb040818a, 0x28818602, 0x32003080, +0x409ffe02, 0x30801203, 0x40800204, 0x3ec40087, +0x41201008, 0x10009c14, 0x40800405, 0x3ac10609, +0x40800606, 0x3ac1460a, 0xb060c107, 0x3ac1860b, +0x20801203, 0x38810602, 0xb0408409, 0x28810602, +0x38814603, 0xb060c40a, 0x4020007f, 0x28814603, +0x41193f83, 0x38818602, 0x60ffc003, 0xb040818b, +0x28818602, 0x32002380, 0x409ffe02, 0x30801204, +0x40800205, 0x3ec40083, 0x40800406, 0x3ac14607, +0x3ac18608, 0xb0810103, 0x41004002, 0x20801204, +0x4020007f, 0x38814603, 0x10009c0b, 0xb060c107, +0x4020007f, 0x4020007f, 0x28814603, 0x38818602, +0x4020007f, 0x4020007f, 0xb0408588, 0x28818602, +0x4020007f, 0x32001780, 0x409ffe02, 0x1000640e, +0x40800204, 0x30801203, 0x40800405, 0x3ec40087, +0x40800606, 0x3ac10608, 0x3ac14609, 0x3ac1860a, +0xb060c107, 0x20801203, 0x413d8003, 0x38810602, +0x4020007f, 0x327fd780, 0x409ffe02, 0x10007f0c, +0x40800205, 0x30801204, 0x40800406, 0x3ec40083, +0x3ac14607, 0x3ac18608, 0xb0810103, 0x413d8002, +0x20801204, 0x38814603, 0x4020007f, 0x327feb80, +0x409ffe02, 0x30801203, 0x40800204, 0x3ec40087, +0x40800405, 0x1000650a, 0x40800606, 0x3ac10608, +0x3ac14609, 0x3ac1860a, 0xb060c107, 0x20801203, +0x38810602, 0xb0408588, 0x4020007f, 0x327fc980, +0x00400000, 0x40800003, 0x4020007f, 0x35000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +}; diff --git a/arch/powerpc/platforms/cell/spufs/spu_save.c b/arch/powerpc/platforms/cell/spufs/spu_save.c new file mode 100644 index 0000000..196033b --- /dev/null +++ b/arch/powerpc/platforms/cell/spufs/spu_save.c @@ -0,0 +1,195 @@ +/* + * spu_save.c + * + * (C) Copyright IBM Corp. 2005 + * + * SPU-side context save sequence outlined in + * Synergistic Processor Element Book IV + * + * Author: Mark Nutter <mnutter@us.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + + +#ifndef LS_SIZE +#define LS_SIZE 0x40000 /* 256K (in bytes) */ +#endif + +typedef unsigned int u32; +typedef unsigned long long u64; + +#include <spu_intrinsics.h> +#include <asm/spu_csa.h> +#include "spu_utils.h" + +static inline void save_event_mask(void) +{ + unsigned int offset; + + /* Save, Step 2: + * Read the SPU_RdEventMsk channel and save to the LSCSA. + */ + offset = LSCSA_QW_OFFSET(event_mask); + regs_spill[offset].slot[0] = spu_readch(SPU_RdEventStatMask); +} + +static inline void save_tag_mask(void) +{ + unsigned int offset; + + /* Save, Step 3: + * Read the SPU_RdTagMsk channel and save to the LSCSA. + */ + offset = LSCSA_QW_OFFSET(tag_mask); + regs_spill[offset].slot[0] = spu_readch(MFC_RdTagMask); +} + +static inline void save_upper_240kb(addr64 lscsa_ea) +{ + unsigned int ls = 16384; + unsigned int list = (unsigned int)&dma_list[0]; + unsigned int size = sizeof(dma_list); + unsigned int tag_id = 0; + unsigned int cmd = 0x24; /* PUTL */ + + /* Save, Step 7: + * Enqueue the PUTL command (tag 0) to the MFC SPU command + * queue to transfer the remaining 240 kb of LS to CSA. + */ + spu_writech(MFC_LSA, ls); + spu_writech(MFC_EAH, lscsa_ea.ui[0]); + spu_writech(MFC_EAL, list); + spu_writech(MFC_Size, size); + spu_writech(MFC_TagID, tag_id); + spu_writech(MFC_Cmd, cmd); +} + +static inline void save_fpcr(void) +{ + // vector unsigned int fpcr; + unsigned int offset; + + /* Save, Step 9: + * Issue the floating-point status and control register + * read instruction, and save to the LSCSA. + */ + offset = LSCSA_QW_OFFSET(fpcr); + regs_spill[offset].v = spu_mffpscr(); +} + +static inline void save_decr(void) +{ + unsigned int offset; + + /* Save, Step 10: + * Read and save the SPU_RdDec channel data to + * the LSCSA. + */ + offset = LSCSA_QW_OFFSET(decr); + regs_spill[offset].slot[0] = spu_readch(SPU_RdDec); +} + +static inline void save_srr0(void) +{ + unsigned int offset; + + /* Save, Step 11: + * Read and save the SPU_WSRR0 channel data to + * the LSCSA. + */ + offset = LSCSA_QW_OFFSET(srr0); + regs_spill[offset].slot[0] = spu_readch(SPU_RdSRR0); +} + +static inline void spill_regs_to_mem(addr64 lscsa_ea) +{ + unsigned int ls = (unsigned int)®s_spill[0]; + unsigned int size = sizeof(regs_spill); + unsigned int tag_id = 0; + unsigned int cmd = 0x20; /* PUT */ + + /* Save, Step 13: + * Enqueue a PUT command (tag 0) to send the LSCSA + * to the CSA. + */ + spu_writech(MFC_LSA, ls); + spu_writech(MFC_EAH, lscsa_ea.ui[0]); + spu_writech(MFC_EAL, lscsa_ea.ui[1]); + spu_writech(MFC_Size, size); + spu_writech(MFC_TagID, tag_id); + spu_writech(MFC_Cmd, cmd); +} + +static inline void enqueue_sync(addr64 lscsa_ea) +{ + unsigned int tag_id = 0; + unsigned int cmd = 0xCC; + + /* Save, Step 14: + * Enqueue an MFC_SYNC command (tag 0). + */ + spu_writech(MFC_TagID, tag_id); + spu_writech(MFC_Cmd, cmd); +} + +static inline void save_complete(void) +{ + /* Save, Step 18: + * Issue a stop-and-signal instruction indicating + * "save complete". Note: This function will not + * return!! + */ + spu_stop(SPU_SAVE_COMPLETE); +} + +/** + * main - entry point for SPU-side context save. + * + * This code deviates from the documented sequence as follows: + * + * 1. The EA for LSCSA is passed from PPE in the + * signal notification channels. + * 2. All 128 registers are saved by crt0.o. + */ +int main() +{ + addr64 lscsa_ea; + + lscsa_ea.ui[0] = spu_readch(SPU_RdSigNotify1); + lscsa_ea.ui[1] = spu_readch(SPU_RdSigNotify2); + + /* Step 1: done by exit(). */ + save_event_mask(); /* Step 2. */ + save_tag_mask(); /* Step 3. */ + set_event_mask(); /* Step 4. */ + set_tag_mask(); /* Step 5. */ + build_dma_list(lscsa_ea); /* Step 6. */ + save_upper_240kb(lscsa_ea); /* Step 7. */ + /* Step 8: done by exit(). */ + save_fpcr(); /* Step 9. */ + save_decr(); /* Step 10. */ + save_srr0(); /* Step 11. */ + enqueue_putllc(lscsa_ea); /* Step 12. */ + spill_regs_to_mem(lscsa_ea); /* Step 13. */ + enqueue_sync(lscsa_ea); /* Step 14. */ + set_tag_update(); /* Step 15. */ + read_tag_status(); /* Step 16. */ + read_llar_status(); /* Step 17. */ + save_complete(); /* Step 18. */ + + return 0; +} diff --git a/arch/powerpc/platforms/cell/spufs/spu_save_crt0.S b/arch/powerpc/platforms/cell/spufs/spu_save_crt0.S new file mode 100644 index 0000000..6659d6a --- /dev/null +++ b/arch/powerpc/platforms/cell/spufs/spu_save_crt0.S @@ -0,0 +1,102 @@ +/* + * crt0_s.S: Entry function for SPU-side context save. + * + * Copyright (C) 2005 IBM + * + * Entry function for SPU-side of the context save sequence. + * Saves all 128 GPRs, sets up an initial stack frame, then + * branches to 'main'. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <asm/spu_csa.h> + +.data +.align 7 +.globl regs_spill +regs_spill: +.space SIZEOF_SPU_SPILL_REGS, 0x0 + +.text +.global _start +_start: + /* SPU Context Save Step 1: Save the first 16 GPRs. */ + stqa $0, regs_spill + 0 + stqa $1, regs_spill + 16 + stqa $2, regs_spill + 32 + stqa $3, regs_spill + 48 + stqa $4, regs_spill + 64 + stqa $5, regs_spill + 80 + stqa $6, regs_spill + 96 + stqa $7, regs_spill + 112 + stqa $8, regs_spill + 128 + stqa $9, regs_spill + 144 + stqa $10, regs_spill + 160 + stqa $11, regs_spill + 176 + stqa $12, regs_spill + 192 + stqa $13, regs_spill + 208 + stqa $14, regs_spill + 224 + stqa $15, regs_spill + 240 + + /* SPU Context Save, Step 8: Save the remaining 112 GPRs. */ + ila $3, regs_spill + 256 +save_regs: + lqr $4, save_reg_insts +save_reg_loop: + ai $4, $4, 4 + .balignl 16, 0x40200000 +save_reg_insts: /* must be quad-word aligned. */ + stqd $16, 0($3) + stqd $17, 16($3) + stqd $18, 32($3) + stqd $19, 48($3) + andi $5, $4, 0x7F + stqr $4, save_reg_insts + ai $3, $3, 64 + brnz $5, save_reg_loop + + /* Initialize the stack pointer to point to 16368 + * (16kb-16). The back chain pointer is initialized + * to NULL. + */ + il $0, 0 + il $SP, 16368 + stqd $0, 0($SP) + + /* Allocate a minimum stack frame for the called main. + * This is needed so that main has a place to save the + * link register when it calls another function. + */ + stqd $SP, -160($SP) + ai $SP, $SP, -160 + + /* Call the program's main function. */ + brsl $0, main + + /* In this case main should not return; if it does + * there has been an error in the sequence. Execute + * stop-and-signal with code=0. + */ +.global exit +.global _exit +exit: +_exit: + stop 0x0 + + /* Pad the size of this crt0.o to be multiple of 16 bytes. */ +.balignl 16, 0x0 + diff --git a/arch/powerpc/platforms/cell/spufs/spu_save_dump.h_shipped b/arch/powerpc/platforms/cell/spufs/spu_save_dump.h_shipped new file mode 100644 index 0000000..39e5400 --- /dev/null +++ b/arch/powerpc/platforms/cell/spufs/spu_save_dump.h_shipped @@ -0,0 +1,191 @@ +/* + * spu_save_dump.h: Copyright (C) 2005 IBM. + * Hex-dump auto generated from spu_save.c. + * Do not edit! + */ +static unsigned int spu_save_code[] __page_aligned = { +0x20805000, 0x20805201, 0x20805402, 0x20805603, +0x20805804, 0x20805a05, 0x20805c06, 0x20805e07, +0x20806008, 0x20806209, 0x2080640a, 0x2080660b, +0x2080680c, 0x20806a0d, 0x20806c0e, 0x20806e0f, +0x4201c003, 0x33800184, 0x1c010204, 0x40200000, +0x24000190, 0x24004191, 0x24008192, 0x2400c193, +0x141fc205, 0x23fffd84, 0x1c100183, 0x217ffb85, +0x40800000, 0x409ff801, 0x24000080, 0x24fd8081, +0x1cd80081, 0x33000180, 0x00000000, 0x00000000, +0x01a00182, 0x3ec00083, 0xb1c38103, 0x01a00204, +0x3ec10082, 0x4201400d, 0xb1c38202, 0x01a00583, +0x34218682, 0x3ed80684, 0xb0408184, 0x24218682, +0x01a00603, 0x00200000, 0x34214682, 0x3ed40684, +0xb0408184, 0x40800003, 0x24214682, 0x21a00083, +0x40800082, 0x21a00b02, 0x4020007f, 0x1000251e, +0x40a80002, 0x32800008, 0x4205c00c, 0x00200000, +0x40a0000b, 0x3f82070f, 0x4080020a, 0x40800709, +0x3fe3078f, 0x3fbf0783, 0x3f200183, 0x3fbe0183, +0x3fe30187, 0x18008387, 0x4205c002, 0x3ac30404, +0x1cffc489, 0x00200000, 0x18008403, 0x38830402, +0x4cffc486, 0x3ac28185, 0xb0408584, 0x28830402, +0x1c020408, 0x38828182, 0xb0408385, 0x1802c387, +0x28828182, 0x217ff886, 0x04000582, 0x32800007, +0x21a00802, 0x3fbf0705, 0x3f200285, 0x3fbe0285, +0x3fe30285, 0x21a00885, 0x04000603, 0x21a00903, +0x40803c02, 0x21a00982, 0x04000386, 0x21a00a06, +0x40801202, 0x21a00a82, 0x73000003, 0x24200683, +0x01a00404, 0x00200000, 0x34204682, 0x3ec40683, +0xb0408203, 0x24204682, 0x01a00783, 0x00200000, +0x3421c682, 0x3edc0684, 0xb0408184, 0x2421c682, +0x21a00806, 0x21a00885, 0x3fbf0784, 0x3f200204, +0x3fbe0204, 0x3fe30204, 0x21a00904, 0x40804002, +0x21a00982, 0x21a00a06, 0x40805a02, 0x21a00a82, +0x04000683, 0x21a00803, 0x21a00885, 0x21a00904, +0x40848002, 0x21a00982, 0x21a00a06, 0x40801002, +0x21a00a82, 0x21a00a06, 0x40806602, 0x00200000, +0x35800009, 0x21a00a82, 0x40800083, 0x21a00b83, +0x01a00c02, 0x01a00d83, 0x00003ffb, 0x40800003, +0x4020007f, 0x35000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +0x00000000, 0x00000000, 0x00000000, 0x00000000, +}; diff --git a/arch/powerpc/platforms/cell/spufs/spu_utils.h b/arch/powerpc/platforms/cell/spufs/spu_utils.h new file mode 100644 index 0000000..58359fe --- /dev/null +++ b/arch/powerpc/platforms/cell/spufs/spu_utils.h @@ -0,0 +1,160 @@ +/* + * utils.h: Utilities for SPU-side of the context switch operation. + * + * (C) Copyright IBM 2005 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _SPU_CONTEXT_UTILS_H_ +#define _SPU_CONTEXT_UTILS_H_ + +/* + * 64-bit safe EA. + */ +typedef union { + unsigned long long ull; + unsigned int ui[2]; +} addr64; + +/* + * 128-bit register template. + */ +typedef union { + unsigned int slot[4]; + vector unsigned int v; +} spu_reg128v; + +/* + * DMA list structure. + */ +struct dma_list_elem { + unsigned int size; + unsigned int ea_low; +}; + +/* + * Declare storage for 8-byte aligned DMA list. + */ +struct dma_list_elem dma_list[15] __attribute__ ((aligned(8))); + +/* + * External definition for storage + * declared in crt0. + */ +extern spu_reg128v regs_spill[NR_SPU_SPILL_REGS]; + +/* + * Compute LSCSA byte offset for a given field. + */ +static struct spu_lscsa *dummy = (struct spu_lscsa *)0; +#define LSCSA_BYTE_OFFSET(_field) \ + ((char *)(&(dummy->_field)) - (char *)(&(dummy->gprs[0].slot[0]))) +#define LSCSA_QW_OFFSET(_field) (LSCSA_BYTE_OFFSET(_field) >> 4) + +static inline void set_event_mask(void) +{ + unsigned int event_mask = 0; + + /* Save, Step 4: + * Restore, Step 1: + * Set the SPU_RdEventMsk channel to zero to mask + * all events. + */ + spu_writech(SPU_WrEventMask, event_mask); +} + +static inline void set_tag_mask(void) +{ + unsigned int tag_mask = 1; + + /* Save, Step 5: + * Restore, Step 2: + * Set the SPU_WrTagMsk channel to '01' to unmask + * only tag group 0. + */ + spu_writech(MFC_WrTagMask, tag_mask); +} + +static inline void build_dma_list(addr64 lscsa_ea) +{ + unsigned int ea_low; + int i; + + /* Save, Step 6: + * Restore, Step 3: + * Update the effective address for the CSA in the + * pre-canned DMA-list in local storage. + */ + ea_low = lscsa_ea.ui[1]; + ea_low += LSCSA_BYTE_OFFSET(ls[16384]); + + for (i = 0; i < 15; i++, ea_low += 16384) { + dma_list[i].size = 16384; + dma_list[i].ea_low = ea_low; + } +} + +static inline void enqueue_putllc(addr64 lscsa_ea) +{ + unsigned int ls = 0; + unsigned int size = 128; + unsigned int tag_id = 0; + unsigned int cmd = 0xB4; /* PUTLLC */ + + /* Save, Step 12: + * Restore, Step 7: + * Send a PUTLLC (tag 0) command to the MFC using + * an effective address in the CSA in order to + * remove any possible lock-line reservation. + */ + spu_writech(MFC_LSA, ls); + spu_writech(MFC_EAH, lscsa_ea.ui[0]); + spu_writech(MFC_EAL, lscsa_ea.ui[1]); + spu_writech(MFC_Size, size); + spu_writech(MFC_TagID, tag_id); + spu_writech(MFC_Cmd, cmd); +} + +static inline void set_tag_update(void) +{ + unsigned int update_any = 1; + + /* Save, Step 15: + * Restore, Step 8: + * Write the MFC_TagUpdate channel with '01'. + */ + spu_writech(MFC_WrTagUpdate, update_any); +} + +static inline void read_tag_status(void) +{ + /* Save, Step 16: + * Restore, Step 9: + * Read the MFC_TagStat channel data. + */ + spu_readch(MFC_RdTagStat); +} + +static inline void read_llar_status(void) +{ + /* Save, Step 17: + * Restore, Step 10: + * Read the MFC_AtomicStat channel data. + */ + spu_readch(MFC_RdAtomicStat); +} + +#endif /* _SPU_CONTEXT_UTILS_H_ */ diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h new file mode 100644 index 0000000..db2601f --- /dev/null +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -0,0 +1,163 @@ +/* + * SPU file system + * + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 + * + * Author: Arnd Bergmann <arndb@de.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#ifndef SPUFS_H +#define SPUFS_H + +#include <linux/kref.h> +#include <linux/rwsem.h> +#include <linux/spinlock.h> +#include <linux/fs.h> + +#include <asm/spu.h> +#include <asm/spu_csa.h> + +/* The magic number for our file system */ +enum { + SPUFS_MAGIC = 0x23c9b64e, +}; + +struct spu_context_ops; + +#define SPU_CONTEXT_PREEMPT 0UL + +struct spu_context { + struct spu *spu; /* pointer to a physical SPU */ + struct spu_state csa; /* SPU context save area. */ + spinlock_t mmio_lock; /* protects mmio access */ + struct address_space *local_store;/* local store backing store */ + + enum { SPU_STATE_RUNNABLE, SPU_STATE_SAVED } state; + struct rw_semaphore state_sema; + struct semaphore run_sema; + + struct mm_struct *owner; + + struct kref kref; + wait_queue_head_t ibox_wq; + wait_queue_head_t wbox_wq; + wait_queue_head_t stop_wq; + struct fasync_struct *ibox_fasync; + struct fasync_struct *wbox_fasync; + struct spu_context_ops *ops; + struct work_struct reap_work; + u64 flags; +}; + +/* SPU context query/set operations. */ +struct spu_context_ops { + int (*mbox_read) (struct spu_context * ctx, u32 * data); + u32(*mbox_stat_read) (struct spu_context * ctx); + unsigned int (*mbox_stat_poll)(struct spu_context *ctx, + unsigned int events); + int (*ibox_read) (struct spu_context * ctx, u32 * data); + int (*wbox_write) (struct spu_context * ctx, u32 data); + u32(*signal1_read) (struct spu_context * ctx); + void (*signal1_write) (struct spu_context * ctx, u32 data); + u32(*signal2_read) (struct spu_context * ctx); + void (*signal2_write) (struct spu_context * ctx, u32 data); + void (*signal1_type_set) (struct spu_context * ctx, u64 val); + u64(*signal1_type_get) (struct spu_context * ctx); + void (*signal2_type_set) (struct spu_context * ctx, u64 val); + u64(*signal2_type_get) (struct spu_context * ctx); + u32(*npc_read) (struct spu_context * ctx); + void (*npc_write) (struct spu_context * ctx, u32 data); + u32(*status_read) (struct spu_context * ctx); + char*(*get_ls) (struct spu_context * ctx); + void (*runcntl_write) (struct spu_context * ctx, u32 data); + void (*runcntl_stop) (struct spu_context * ctx); +}; + +extern struct spu_context_ops spu_hw_ops; +extern struct spu_context_ops spu_backing_ops; + +struct spufs_inode_info { + struct spu_context *i_ctx; + struct inode vfs_inode; +}; +#define SPUFS_I(inode) \ + container_of(inode, struct spufs_inode_info, vfs_inode) + +extern struct tree_descr spufs_dir_contents[]; + +/* system call implementation */ +long spufs_run_spu(struct file *file, + struct spu_context *ctx, u32 *npc, u32 *status); +long spufs_create_thread(struct nameidata *nd, + unsigned int flags, mode_t mode); +extern struct file_operations spufs_context_fops; + +/* context management */ +struct spu_context * alloc_spu_context(struct address_space *local_store); +void destroy_spu_context(struct kref *kref); +struct spu_context * get_spu_context(struct spu_context *ctx); +int put_spu_context(struct spu_context *ctx); +void spu_unmap_mappings(struct spu_context *ctx); + +void spu_forget(struct spu_context *ctx); +void spu_acquire(struct spu_context *ctx); +void spu_release(struct spu_context *ctx); +int spu_acquire_runnable(struct spu_context *ctx); +void spu_acquire_saved(struct spu_context *ctx); + +int spu_activate(struct spu_context *ctx, u64 flags); +void spu_deactivate(struct spu_context *ctx); +void spu_yield(struct spu_context *ctx); +int __init spu_sched_init(void); +void __exit spu_sched_exit(void); + +/* + * spufs_wait + * Same as wait_event_interruptible(), except that here + * we need to call spu_release(ctx) before sleeping, and + * then spu_acquire(ctx) when awoken. + */ + +#define spufs_wait(wq, condition) \ +({ \ + int __ret = 0; \ + DEFINE_WAIT(__wait); \ + for (;;) { \ + prepare_to_wait(&(wq), &__wait, TASK_INTERRUPTIBLE); \ + if (condition) \ + break; \ + if (!signal_pending(current)) { \ + spu_release(ctx); \ + schedule(); \ + spu_acquire(ctx); \ + continue; \ + } \ + __ret = -ERESTARTSYS; \ + break; \ + } \ + finish_wait(&(wq), &__wait); \ + __ret; \ +}) + +size_t spu_wbox_write(struct spu_context *ctx, u32 data); +size_t spu_ibox_read(struct spu_context *ctx, u32 *data); + +/* irq callback funcs. */ +void spufs_ibox_callback(struct spu *spu); +void spufs_wbox_callback(struct spu *spu); +void spufs_stop_callback(struct spu *spu); + +#endif diff --git a/arch/powerpc/platforms/cell/spufs/switch.c b/arch/powerpc/platforms/cell/spufs/switch.c new file mode 100644 index 0000000..1061c12 --- /dev/null +++ b/arch/powerpc/platforms/cell/spufs/switch.c @@ -0,0 +1,2180 @@ +/* + * spu_switch.c + * + * (C) Copyright IBM Corp. 2005 + * + * Author: Mark Nutter <mnutter@us.ibm.com> + * + * Host-side part of SPU context switch sequence outlined in + * Synergistic Processor Element, Book IV. + * + * A fully premptive switch of an SPE is very expensive in terms + * of time and system resources. SPE Book IV indicates that SPE + * allocation should follow a "serially reusable device" model, + * in which the SPE is assigned a task until it completes. When + * this is not possible, this sequence may be used to premptively + * save, and then later (optionally) restore the context of a + * program executing on an SPE. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/vmalloc.h> +#include <linux/smp.h> +#include <linux/smp_lock.h> +#include <linux/stddef.h> +#include <linux/unistd.h> + +#include <asm/io.h> +#include <asm/spu.h> +#include <asm/spu_csa.h> +#include <asm/mmu_context.h> + +#include "spu_save_dump.h" +#include "spu_restore_dump.h" + +#if 0 +#define POLL_WHILE_TRUE(_c) { \ + do { \ + } while (_c); \ + } +#else +#define RELAX_SPIN_COUNT 1000 +#define POLL_WHILE_TRUE(_c) { \ + do { \ + int _i; \ + for (_i=0; _i<RELAX_SPIN_COUNT && (_c); _i++) { \ + cpu_relax(); \ + } \ + if (unlikely(_c)) yield(); \ + else break; \ + } while (_c); \ + } +#endif /* debug */ + +#define POLL_WHILE_FALSE(_c) POLL_WHILE_TRUE(!(_c)) + +static inline void acquire_spu_lock(struct spu *spu) +{ + /* Save, Step 1: + * Restore, Step 1: + * Acquire SPU-specific mutual exclusion lock. + * TBD. + */ +} + +static inline void release_spu_lock(struct spu *spu) +{ + /* Restore, Step 76: + * Release SPU-specific mutual exclusion lock. + * TBD. + */ +} + +static inline int check_spu_isolate(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + u32 isolate_state; + + /* Save, Step 2: + * Save, Step 6: + * If SPU_Status[E,L,IS] any field is '1', this + * SPU is in isolate state and cannot be context + * saved at this time. + */ + isolate_state = SPU_STATUS_ISOLATED_STATE | + SPU_STATUS_ISOLATED_LOAD_STAUTUS | SPU_STATUS_ISOLATED_EXIT_STAUTUS; + return (in_be32(&prob->spu_status_R) & isolate_state) ? 1 : 0; +} + +static inline void disable_interrupts(struct spu_state *csa, struct spu *spu) +{ + /* Save, Step 3: + * Restore, Step 2: + * Save INT_Mask_class0 in CSA. + * Write INT_MASK_class0 with value of 0. + * Save INT_Mask_class1 in CSA. + * Write INT_MASK_class1 with value of 0. + * Save INT_Mask_class2 in CSA. + * Write INT_MASK_class2 with value of 0. + */ + spin_lock_irq(&spu->register_lock); + if (csa) { + csa->priv1.int_mask_class0_RW = spu_int_mask_get(spu, 0); + csa->priv1.int_mask_class1_RW = spu_int_mask_get(spu, 1); + csa->priv1.int_mask_class2_RW = spu_int_mask_get(spu, 2); + } + spu_int_mask_set(spu, 0, 0ul); + spu_int_mask_set(spu, 1, 0ul); + spu_int_mask_set(spu, 2, 0ul); + eieio(); + spin_unlock_irq(&spu->register_lock); +} + +static inline void set_watchdog_timer(struct spu_state *csa, struct spu *spu) +{ + /* Save, Step 4: + * Restore, Step 25. + * Set a software watchdog timer, which specifies the + * maximum allowable time for a context save sequence. + * + * For present, this implementation will not set a global + * watchdog timer, as virtualization & variable system load + * may cause unpredictable execution times. + */ +} + +static inline void inhibit_user_access(struct spu_state *csa, struct spu *spu) +{ + /* Save, Step 5: + * Restore, Step 3: + * Inhibit user-space access (if provided) to this + * SPU by unmapping the virtual pages assigned to + * the SPU memory-mapped I/O (MMIO) for problem + * state. TBD. + */ +} + +static inline void set_switch_pending(struct spu_state *csa, struct spu *spu) +{ + /* Save, Step 7: + * Restore, Step 5: + * Set a software context switch pending flag. + */ + set_bit(SPU_CONTEXT_SWITCH_PENDING, &spu->flags); + mb(); +} + +static inline void save_mfc_cntl(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Save, Step 8: + * Read and save MFC_CNTL[Ss]. + */ + if (csa) { + csa->priv2.mfc_control_RW = in_be64(&priv2->mfc_control_RW) & + MFC_CNTL_SUSPEND_DMA_STATUS_MASK; + } +} + +static inline void save_spu_runcntl(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + + /* Save, Step 9: + * Save SPU_Runcntl in the CSA. This value contains + * the "Application Desired State". + */ + csa->prob.spu_runcntl_RW = in_be32(&prob->spu_runcntl_RW); +} + +static inline void save_mfc_sr1(struct spu_state *csa, struct spu *spu) +{ + /* Save, Step 10: + * Save MFC_SR1 in the CSA. + */ + csa->priv1.mfc_sr1_RW = spu_mfc_sr1_get(spu); +} + +static inline void save_spu_status(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + + /* Save, Step 11: + * Read SPU_Status[R], and save to CSA. + */ + if ((in_be32(&prob->spu_status_R) & SPU_STATUS_RUNNING) == 0) { + csa->prob.spu_status_R = in_be32(&prob->spu_status_R); + } else { + u32 stopped; + + out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_STOP); + eieio(); + POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) & + SPU_STATUS_RUNNING); + stopped = + SPU_STATUS_INVALID_INSTR | SPU_STATUS_SINGLE_STEP | + SPU_STATUS_STOPPED_BY_HALT | SPU_STATUS_STOPPED_BY_STOP; + if ((in_be32(&prob->spu_status_R) & stopped) == 0) + csa->prob.spu_status_R = SPU_STATUS_RUNNING; + else + csa->prob.spu_status_R = in_be32(&prob->spu_status_R); + } +} + +static inline void save_mfc_decr(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Save, Step 12: + * Read MFC_CNTL[Ds]. Update saved copy of + * CSA.MFC_CNTL[Ds]. + */ + if (in_be64(&priv2->mfc_control_RW) & MFC_CNTL_DECREMENTER_RUNNING) { + csa->priv2.mfc_control_RW |= MFC_CNTL_DECREMENTER_RUNNING; + csa->suspend_time = get_cycles(); + out_be64(&priv2->spu_chnlcntptr_RW, 7ULL); + eieio(); + csa->spu_chnldata_RW[7] = in_be64(&priv2->spu_chnldata_RW); + eieio(); + } +} + +static inline void halt_mfc_decr(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Save, Step 13: + * Write MFC_CNTL[Dh] set to a '1' to halt + * the decrementer. + */ + out_be64(&priv2->mfc_control_RW, MFC_CNTL_DECREMENTER_HALTED); + eieio(); +} + +static inline void save_timebase(struct spu_state *csa, struct spu *spu) +{ + /* Save, Step 14: + * Read PPE Timebase High and Timebase low registers + * and save in CSA. TBD. + */ + csa->suspend_time = get_cycles(); +} + +static inline void remove_other_spu_access(struct spu_state *csa, + struct spu *spu) +{ + /* Save, Step 15: + * Remove other SPU access to this SPU by unmapping + * this SPU's pages from their address space. TBD. + */ +} + +static inline void do_mfc_mssync(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + + /* Save, Step 16: + * Restore, Step 11. + * Write SPU_MSSync register. Poll SPU_MSSync[P] + * for a value of 0. + */ + out_be64(&prob->spc_mssync_RW, 1UL); + POLL_WHILE_TRUE(in_be64(&prob->spc_mssync_RW) & MS_SYNC_PENDING); +} + +static inline void issue_mfc_tlbie(struct spu_state *csa, struct spu *spu) +{ + /* Save, Step 17: + * Restore, Step 12. + * Restore, Step 48. + * Write TLB_Invalidate_Entry[IS,VPN,L,Lp]=0 register. + * Then issue a PPE sync instruction. + */ + spu_tlb_invalidate(spu); + mb(); +} + +static inline void handle_pending_interrupts(struct spu_state *csa, + struct spu *spu) +{ + /* Save, Step 18: + * Handle any pending interrupts from this SPU + * here. This is OS or hypervisor specific. One + * option is to re-enable interrupts to handle any + * pending interrupts, with the interrupt handlers + * recognizing the software Context Switch Pending + * flag, to ensure the SPU execution or MFC command + * queue is not restarted. TBD. + */ +} + +static inline void save_mfc_queues(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + int i; + + /* Save, Step 19: + * If MFC_Cntl[Se]=0 then save + * MFC command queues. + */ + if ((in_be64(&priv2->mfc_control_RW) & MFC_CNTL_DMA_QUEUES_EMPTY) == 0) { + for (i = 0; i < 8; i++) { + csa->priv2.puq[i].mfc_cq_data0_RW = + in_be64(&priv2->puq[i].mfc_cq_data0_RW); + csa->priv2.puq[i].mfc_cq_data1_RW = + in_be64(&priv2->puq[i].mfc_cq_data1_RW); + csa->priv2.puq[i].mfc_cq_data2_RW = + in_be64(&priv2->puq[i].mfc_cq_data2_RW); + csa->priv2.puq[i].mfc_cq_data3_RW = + in_be64(&priv2->puq[i].mfc_cq_data3_RW); + } + for (i = 0; i < 16; i++) { + csa->priv2.spuq[i].mfc_cq_data0_RW = + in_be64(&priv2->spuq[i].mfc_cq_data0_RW); + csa->priv2.spuq[i].mfc_cq_data1_RW = + in_be64(&priv2->spuq[i].mfc_cq_data1_RW); + csa->priv2.spuq[i].mfc_cq_data2_RW = + in_be64(&priv2->spuq[i].mfc_cq_data2_RW); + csa->priv2.spuq[i].mfc_cq_data3_RW = + in_be64(&priv2->spuq[i].mfc_cq_data3_RW); + } + } +} + +static inline void save_ppu_querymask(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + + /* Save, Step 20: + * Save the PPU_QueryMask register + * in the CSA. + */ + csa->prob.dma_querymask_RW = in_be32(&prob->dma_querymask_RW); +} + +static inline void save_ppu_querytype(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + + /* Save, Step 21: + * Save the PPU_QueryType register + * in the CSA. + */ + csa->prob.dma_querytype_RW = in_be32(&prob->dma_querytype_RW); +} + +static inline void save_mfc_csr_tsq(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Save, Step 22: + * Save the MFC_CSR_TSQ register + * in the LSCSA. + */ + csa->priv2.spu_tag_status_query_RW = + in_be64(&priv2->spu_tag_status_query_RW); +} + +static inline void save_mfc_csr_cmd(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Save, Step 23: + * Save the MFC_CSR_CMD1 and MFC_CSR_CMD2 + * registers in the CSA. + */ + csa->priv2.spu_cmd_buf1_RW = in_be64(&priv2->spu_cmd_buf1_RW); + csa->priv2.spu_cmd_buf2_RW = in_be64(&priv2->spu_cmd_buf2_RW); +} + +static inline void save_mfc_csr_ato(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Save, Step 24: + * Save the MFC_CSR_ATO register in + * the CSA. + */ + csa->priv2.spu_atomic_status_RW = in_be64(&priv2->spu_atomic_status_RW); +} + +static inline void save_mfc_tclass_id(struct spu_state *csa, struct spu *spu) +{ + /* Save, Step 25: + * Save the MFC_TCLASS_ID register in + * the CSA. + */ + csa->priv1.mfc_tclass_id_RW = spu_mfc_tclass_id_get(spu); +} + +static inline void set_mfc_tclass_id(struct spu_state *csa, struct spu *spu) +{ + /* Save, Step 26: + * Restore, Step 23. + * Write the MFC_TCLASS_ID register with + * the value 0x10000000. + */ + spu_mfc_tclass_id_set(spu, 0x10000000); + eieio(); +} + +static inline void purge_mfc_queue(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Save, Step 27: + * Restore, Step 14. + * Write MFC_CNTL[Pc]=1 (purge queue). + */ + out_be64(&priv2->mfc_control_RW, MFC_CNTL_PURGE_DMA_REQUEST); + eieio(); +} + +static inline void wait_purge_complete(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Save, Step 28: + * Poll MFC_CNTL[Ps] until value '11' is read + * (purge complete). + */ + POLL_WHILE_FALSE(in_be64(&priv2->mfc_control_RW) & + MFC_CNTL_PURGE_DMA_COMPLETE); +} + +static inline void save_mfc_slbs(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + int i; + + /* Save, Step 29: + * If MFC_SR1[R]='1', save SLBs in CSA. + */ + if (spu_mfc_sr1_get(spu) & MFC_STATE1_RELOCATE_MASK) { + csa->priv2.slb_index_W = in_be64(&priv2->slb_index_W); + for (i = 0; i < 8; i++) { + out_be64(&priv2->slb_index_W, i); + eieio(); + csa->slb_esid_RW[i] = in_be64(&priv2->slb_esid_RW); + csa->slb_vsid_RW[i] = in_be64(&priv2->slb_vsid_RW); + eieio(); + } + } +} + +static inline void setup_mfc_sr1(struct spu_state *csa, struct spu *spu) +{ + /* Save, Step 30: + * Restore, Step 18: + * Write MFC_SR1 with MFC_SR1[D=0,S=1] and + * MFC_SR1[TL,R,Pr,T] set correctly for the + * OS specific environment. + * + * Implementation note: The SPU-side code + * for save/restore is privileged, so the + * MFC_SR1[Pr] bit is not set. + * + */ + spu_mfc_sr1_set(spu, (MFC_STATE1_MASTER_RUN_CONTROL_MASK | + MFC_STATE1_RELOCATE_MASK | + MFC_STATE1_BUS_TLBIE_MASK)); +} + +static inline void save_spu_npc(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + + /* Save, Step 31: + * Save SPU_NPC in the CSA. + */ + csa->prob.spu_npc_RW = in_be32(&prob->spu_npc_RW); +} + +static inline void save_spu_privcntl(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Save, Step 32: + * Save SPU_PrivCntl in the CSA. + */ + csa->priv2.spu_privcntl_RW = in_be64(&priv2->spu_privcntl_RW); +} + +static inline void reset_spu_privcntl(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Save, Step 33: + * Restore, Step 16: + * Write SPU_PrivCntl[S,Le,A] fields reset to 0. + */ + out_be64(&priv2->spu_privcntl_RW, 0UL); + eieio(); +} + +static inline void save_spu_lslr(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Save, Step 34: + * Save SPU_LSLR in the CSA. + */ + csa->priv2.spu_lslr_RW = in_be64(&priv2->spu_lslr_RW); +} + +static inline void reset_spu_lslr(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Save, Step 35: + * Restore, Step 17. + * Reset SPU_LSLR. + */ + out_be64(&priv2->spu_lslr_RW, LS_ADDR_MASK); + eieio(); +} + +static inline void save_spu_cfg(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Save, Step 36: + * Save SPU_Cfg in the CSA. + */ + csa->priv2.spu_cfg_RW = in_be64(&priv2->spu_cfg_RW); +} + +static inline void save_pm_trace(struct spu_state *csa, struct spu *spu) +{ + /* Save, Step 37: + * Save PM_Trace_Tag_Wait_Mask in the CSA. + * Not performed by this implementation. + */ +} + +static inline void save_mfc_rag(struct spu_state *csa, struct spu *spu) +{ + /* Save, Step 38: + * Save RA_GROUP_ID register and the + * RA_ENABLE reigster in the CSA. + */ + csa->priv1.resource_allocation_groupID_RW = + spu_resource_allocation_groupID_get(spu); + csa->priv1.resource_allocation_enable_RW = + spu_resource_allocation_enable_get(spu); +} + +static inline void save_ppu_mb_stat(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + + /* Save, Step 39: + * Save MB_Stat register in the CSA. + */ + csa->prob.mb_stat_R = in_be32(&prob->mb_stat_R); +} + +static inline void save_ppu_mb(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + + /* Save, Step 40: + * Save the PPU_MB register in the CSA. + */ + csa->prob.pu_mb_R = in_be32(&prob->pu_mb_R); +} + +static inline void save_ppuint_mb(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Save, Step 41: + * Save the PPUINT_MB register in the CSA. + */ + csa->priv2.puint_mb_R = in_be64(&priv2->puint_mb_R); +} + +static inline void save_ch_part1(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + u64 idx, ch_indices[7] = { 0UL, 1UL, 3UL, 4UL, 24UL, 25UL, 27UL }; + int i; + + /* Save, Step 42: + * Save the following CH: [0,1,3,4,24,25,27] + */ + for (i = 0; i < 7; i++) { + idx = ch_indices[i]; + out_be64(&priv2->spu_chnlcntptr_RW, idx); + eieio(); + csa->spu_chnldata_RW[idx] = in_be64(&priv2->spu_chnldata_RW); + csa->spu_chnlcnt_RW[idx] = in_be64(&priv2->spu_chnlcnt_RW); + out_be64(&priv2->spu_chnldata_RW, 0UL); + out_be64(&priv2->spu_chnlcnt_RW, 0UL); + eieio(); + } +} + +static inline void save_spu_mb(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + int i; + + /* Save, Step 43: + * Save SPU Read Mailbox Channel. + */ + out_be64(&priv2->spu_chnlcntptr_RW, 29UL); + eieio(); + csa->spu_chnlcnt_RW[29] = in_be64(&priv2->spu_chnlcnt_RW); + for (i = 0; i < 4; i++) { + csa->spu_mailbox_data[i] = in_be64(&priv2->spu_chnldata_RW); + } + out_be64(&priv2->spu_chnlcnt_RW, 0UL); + eieio(); +} + +static inline void save_mfc_cmd(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Save, Step 44: + * Save MFC_CMD Channel. + */ + out_be64(&priv2->spu_chnlcntptr_RW, 21UL); + eieio(); + csa->spu_chnlcnt_RW[21] = in_be64(&priv2->spu_chnlcnt_RW); + eieio(); +} + +static inline void reset_ch(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + u64 ch_indices[4] = { 21UL, 23UL, 28UL, 30UL }; + u64 ch_counts[4] = { 16UL, 1UL, 1UL, 1UL }; + u64 idx; + int i; + + /* Save, Step 45: + * Reset the following CH: [21, 23, 28, 30] + */ + for (i = 0; i < 4; i++) { + idx = ch_indices[i]; + out_be64(&priv2->spu_chnlcntptr_RW, idx); + eieio(); + out_be64(&priv2->spu_chnlcnt_RW, ch_counts[i]); + eieio(); + } +} + +static inline void resume_mfc_queue(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Save, Step 46: + * Restore, Step 25. + * Write MFC_CNTL[Sc]=0 (resume queue processing). + */ + out_be64(&priv2->mfc_control_RW, MFC_CNTL_RESUME_DMA_QUEUE); +} + +static inline void invalidate_slbs(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Save, Step 45: + * Restore, Step 19: + * If MFC_SR1[R]=1, write 0 to SLB_Invalidate_All. + */ + if (spu_mfc_sr1_get(spu) & MFC_STATE1_RELOCATE_MASK) { + out_be64(&priv2->slb_invalidate_all_W, 0UL); + eieio(); + } +} + +static inline void get_kernel_slb(u64 ea, u64 slb[2]) +{ + slb[0] = (get_kernel_vsid(ea) << SLB_VSID_SHIFT) | SLB_VSID_KERNEL; + slb[1] = (ea & ESID_MASK) | SLB_ESID_V; + + /* Large pages are used for kernel text/data, but not vmalloc. */ + if (cpu_has_feature(CPU_FTR_16M_PAGE) + && REGION_ID(ea) == KERNEL_REGION_ID) + slb[0] |= SLB_VSID_L; +} + +static inline void load_mfc_slb(struct spu *spu, u64 slb[2], int slbe) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + out_be64(&priv2->slb_index_W, slbe); + eieio(); + out_be64(&priv2->slb_vsid_RW, slb[0]); + out_be64(&priv2->slb_esid_RW, slb[1]); + eieio(); +} + +static inline void setup_mfc_slbs(struct spu_state *csa, struct spu *spu) +{ + u64 code_slb[2]; + u64 lscsa_slb[2]; + + /* Save, Step 47: + * Restore, Step 30. + * If MFC_SR1[R]=1, write 0 to SLB_Invalidate_All + * register, then initialize SLB_VSID and SLB_ESID + * to provide access to SPU context save code and + * LSCSA. + * + * This implementation places both the context + * switch code and LSCSA in kernel address space. + * + * Further this implementation assumes that the + * MFC_SR1[R]=1 (in other words, assume that + * translation is desired by OS environment). + */ + invalidate_slbs(csa, spu); + get_kernel_slb((unsigned long)&spu_save_code[0], code_slb); + get_kernel_slb((unsigned long)csa->lscsa, lscsa_slb); + load_mfc_slb(spu, code_slb, 0); + if ((lscsa_slb[0] != code_slb[0]) || (lscsa_slb[1] != code_slb[1])) + load_mfc_slb(spu, lscsa_slb, 1); +} + +static inline void set_switch_active(struct spu_state *csa, struct spu *spu) +{ + /* Save, Step 48: + * Restore, Step 23. + * Change the software context switch pending flag + * to context switch active. + */ + set_bit(SPU_CONTEXT_SWITCH_ACTIVE, &spu->flags); + clear_bit(SPU_CONTEXT_SWITCH_PENDING, &spu->flags); + mb(); +} + +static inline void enable_interrupts(struct spu_state *csa, struct spu *spu) +{ + unsigned long class1_mask = CLASS1_ENABLE_SEGMENT_FAULT_INTR | + CLASS1_ENABLE_STORAGE_FAULT_INTR; + + /* Save, Step 49: + * Restore, Step 22: + * Reset and then enable interrupts, as + * needed by OS. + * + * This implementation enables only class1 + * (translation) interrupts. + */ + spin_lock_irq(&spu->register_lock); + spu_int_stat_clear(spu, 0, ~0ul); + spu_int_stat_clear(spu, 1, ~0ul); + spu_int_stat_clear(spu, 2, ~0ul); + spu_int_mask_set(spu, 0, 0ul); + spu_int_mask_set(spu, 1, class1_mask); + spu_int_mask_set(spu, 2, 0ul); + spin_unlock_irq(&spu->register_lock); +} + +static inline int send_mfc_dma(struct spu *spu, unsigned long ea, + unsigned int ls_offset, unsigned int size, + unsigned int tag, unsigned int rclass, + unsigned int cmd) +{ + struct spu_problem __iomem *prob = spu->problem; + union mfc_tag_size_class_cmd command; + unsigned int transfer_size; + volatile unsigned int status = 0x0; + + while (size > 0) { + transfer_size = + (size > MFC_MAX_DMA_SIZE) ? MFC_MAX_DMA_SIZE : size; + command.u.mfc_size = transfer_size; + command.u.mfc_tag = tag; + command.u.mfc_rclassid = rclass; + command.u.mfc_cmd = cmd; + do { + out_be32(&prob->mfc_lsa_W, ls_offset); + out_be64(&prob->mfc_ea_W, ea); + out_be64(&prob->mfc_union_W.all64, command.all64); + status = + in_be32(&prob->mfc_union_W.by32.mfc_class_cmd32); + if (unlikely(status & 0x2)) { + cpu_relax(); + } + } while (status & 0x3); + size -= transfer_size; + ea += transfer_size; + ls_offset += transfer_size; + } + return 0; +} + +static inline void save_ls_16kb(struct spu_state *csa, struct spu *spu) +{ + unsigned long addr = (unsigned long)&csa->lscsa->ls[0]; + unsigned int ls_offset = 0x0; + unsigned int size = 16384; + unsigned int tag = 0; + unsigned int rclass = 0; + unsigned int cmd = MFC_PUT_CMD; + + /* Save, Step 50: + * Issue a DMA command to copy the first 16K bytes + * of local storage to the CSA. + */ + send_mfc_dma(spu, addr, ls_offset, size, tag, rclass, cmd); +} + +static inline void set_spu_npc(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + + /* Save, Step 51: + * Restore, Step 31. + * Write SPU_NPC[IE]=0 and SPU_NPC[LSA] to entry + * point address of context save code in local + * storage. + * + * This implementation uses SPU-side save/restore + * programs with entry points at LSA of 0. + */ + out_be32(&prob->spu_npc_RW, 0); + eieio(); +} + +static inline void set_signot1(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + union { + u64 ull; + u32 ui[2]; + } addr64; + + /* Save, Step 52: + * Restore, Step 32: + * Write SPU_Sig_Notify_1 register with upper 32-bits + * of the CSA.LSCSA effective address. + */ + addr64.ull = (u64) csa->lscsa; + out_be32(&prob->signal_notify1, addr64.ui[0]); + eieio(); +} + +static inline void set_signot2(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + union { + u64 ull; + u32 ui[2]; + } addr64; + + /* Save, Step 53: + * Restore, Step 33: + * Write SPU_Sig_Notify_2 register with lower 32-bits + * of the CSA.LSCSA effective address. + */ + addr64.ull = (u64) csa->lscsa; + out_be32(&prob->signal_notify2, addr64.ui[1]); + eieio(); +} + +static inline void send_save_code(struct spu_state *csa, struct spu *spu) +{ + unsigned long addr = (unsigned long)&spu_save_code[0]; + unsigned int ls_offset = 0x0; + unsigned int size = sizeof(spu_save_code); + unsigned int tag = 0; + unsigned int rclass = 0; + unsigned int cmd = MFC_GETFS_CMD; + + /* Save, Step 54: + * Issue a DMA command to copy context save code + * to local storage and start SPU. + */ + send_mfc_dma(spu, addr, ls_offset, size, tag, rclass, cmd); +} + +static inline void set_ppu_querymask(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + + /* Save, Step 55: + * Restore, Step 38. + * Write PPU_QueryMask=1 (enable Tag Group 0) + * and issue eieio instruction. + */ + out_be32(&prob->dma_querymask_RW, MFC_TAGID_TO_TAGMASK(0)); + eieio(); +} + +static inline void wait_tag_complete(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + u32 mask = MFC_TAGID_TO_TAGMASK(0); + unsigned long flags; + + /* Save, Step 56: + * Restore, Step 39. + * Restore, Step 39. + * Restore, Step 46. + * Poll PPU_TagStatus[gn] until 01 (Tag group 0 complete) + * or write PPU_QueryType[TS]=01 and wait for Tag Group + * Complete Interrupt. Write INT_Stat_Class0 or + * INT_Stat_Class2 with value of 'handled'. + */ + POLL_WHILE_FALSE(in_be32(&prob->dma_tagstatus_R) & mask); + + local_irq_save(flags); + spu_int_stat_clear(spu, 0, ~(0ul)); + spu_int_stat_clear(spu, 2, ~(0ul)); + local_irq_restore(flags); +} + +static inline void wait_spu_stopped(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + unsigned long flags; + + /* Save, Step 57: + * Restore, Step 40. + * Poll until SPU_Status[R]=0 or wait for SPU Class 0 + * or SPU Class 2 interrupt. Write INT_Stat_class0 + * or INT_Stat_class2 with value of handled. + */ + POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) & SPU_STATUS_RUNNING); + + local_irq_save(flags); + spu_int_stat_clear(spu, 0, ~(0ul)); + spu_int_stat_clear(spu, 2, ~(0ul)); + local_irq_restore(flags); +} + +static inline int check_save_status(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + u32 complete; + + /* Save, Step 54: + * If SPU_Status[P]=1 and SPU_Status[SC] = "success", + * context save succeeded, otherwise context save + * failed. + */ + complete = ((SPU_SAVE_COMPLETE << SPU_STOP_STATUS_SHIFT) | + SPU_STATUS_STOPPED_BY_STOP); + return (in_be32(&prob->spu_status_R) != complete) ? 1 : 0; +} + +static inline void terminate_spu_app(struct spu_state *csa, struct spu *spu) +{ + /* Restore, Step 4: + * If required, notify the "using application" that + * the SPU task has been terminated. TBD. + */ +} + +static inline void suspend_mfc(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Restore, Step 7: + * Restore, Step 47. + * Write MFC_Cntl[Dh,Sc]='1','1' to suspend + * the queue and halt the decrementer. + */ + out_be64(&priv2->mfc_control_RW, MFC_CNTL_SUSPEND_DMA_QUEUE | + MFC_CNTL_DECREMENTER_HALTED); + eieio(); +} + +static inline void wait_suspend_mfc_complete(struct spu_state *csa, + struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Restore, Step 8: + * Restore, Step 47. + * Poll MFC_CNTL[Ss] until 11 is returned. + */ + POLL_WHILE_FALSE(in_be64(&priv2->mfc_control_RW) & + MFC_CNTL_SUSPEND_COMPLETE); +} + +static inline int suspend_spe(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + + /* Restore, Step 9: + * If SPU_Status[R]=1, stop SPU execution + * and wait for stop to complete. + * + * Returns 1 if SPU_Status[R]=1 on entry. + * 0 otherwise + */ + if (in_be32(&prob->spu_status_R) & SPU_STATUS_RUNNING) { + if (in_be32(&prob->spu_status_R) & + SPU_STATUS_ISOLATED_EXIT_STAUTUS) { + POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) & + SPU_STATUS_RUNNING); + } + if ((in_be32(&prob->spu_status_R) & + SPU_STATUS_ISOLATED_LOAD_STAUTUS) + || (in_be32(&prob->spu_status_R) & + SPU_STATUS_ISOLATED_STATE)) { + out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_STOP); + eieio(); + POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) & + SPU_STATUS_RUNNING); + out_be32(&prob->spu_runcntl_RW, 0x2); + eieio(); + POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) & + SPU_STATUS_RUNNING); + } + if (in_be32(&prob->spu_status_R) & + SPU_STATUS_WAITING_FOR_CHANNEL) { + out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_STOP); + eieio(); + POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) & + SPU_STATUS_RUNNING); + } + return 1; + } + return 0; +} + +static inline void clear_spu_status(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + + /* Restore, Step 10: + * If SPU_Status[R]=0 and SPU_Status[E,L,IS]=1, + * release SPU from isolate state. + */ + if (!(in_be32(&prob->spu_status_R) & SPU_STATUS_RUNNING)) { + if (in_be32(&prob->spu_status_R) & + SPU_STATUS_ISOLATED_EXIT_STAUTUS) { + spu_mfc_sr1_set(spu, + MFC_STATE1_MASTER_RUN_CONTROL_MASK); + eieio(); + out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_RUNNABLE); + eieio(); + POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) & + SPU_STATUS_RUNNING); + } + if ((in_be32(&prob->spu_status_R) & + SPU_STATUS_ISOLATED_LOAD_STAUTUS) + || (in_be32(&prob->spu_status_R) & + SPU_STATUS_ISOLATED_STATE)) { + spu_mfc_sr1_set(spu, + MFC_STATE1_MASTER_RUN_CONTROL_MASK); + eieio(); + out_be32(&prob->spu_runcntl_RW, 0x2); + eieio(); + POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) & + SPU_STATUS_RUNNING); + } + } +} + +static inline void reset_ch_part1(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + u64 ch_indices[7] = { 0UL, 1UL, 3UL, 4UL, 24UL, 25UL, 27UL }; + u64 idx; + int i; + + /* Restore, Step 20: + * Reset the following CH: [0,1,3,4,24,25,27] + */ + for (i = 0; i < 7; i++) { + idx = ch_indices[i]; + out_be64(&priv2->spu_chnlcntptr_RW, idx); + eieio(); + out_be64(&priv2->spu_chnldata_RW, 0UL); + out_be64(&priv2->spu_chnlcnt_RW, 0UL); + eieio(); + } +} + +static inline void reset_ch_part2(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + u64 ch_indices[5] = { 21UL, 23UL, 28UL, 29UL, 30UL }; + u64 ch_counts[5] = { 16UL, 1UL, 1UL, 0UL, 1UL }; + u64 idx; + int i; + + /* Restore, Step 21: + * Reset the following CH: [21, 23, 28, 29, 30] + */ + for (i = 0; i < 5; i++) { + idx = ch_indices[i]; + out_be64(&priv2->spu_chnlcntptr_RW, idx); + eieio(); + out_be64(&priv2->spu_chnlcnt_RW, ch_counts[i]); + eieio(); + } +} + +static inline void setup_spu_status_part1(struct spu_state *csa, + struct spu *spu) +{ + u32 status_P = SPU_STATUS_STOPPED_BY_STOP; + u32 status_I = SPU_STATUS_INVALID_INSTR; + u32 status_H = SPU_STATUS_STOPPED_BY_HALT; + u32 status_S = SPU_STATUS_SINGLE_STEP; + u32 status_S_I = SPU_STATUS_SINGLE_STEP | SPU_STATUS_INVALID_INSTR; + u32 status_S_P = SPU_STATUS_SINGLE_STEP | SPU_STATUS_STOPPED_BY_STOP; + u32 status_P_H = SPU_STATUS_STOPPED_BY_HALT |SPU_STATUS_STOPPED_BY_STOP; + u32 status_P_I = SPU_STATUS_STOPPED_BY_STOP |SPU_STATUS_INVALID_INSTR; + u32 status_code; + + /* Restore, Step 27: + * If the CSA.SPU_Status[I,S,H,P]=1 then add the correct + * instruction sequence to the end of the SPU based restore + * code (after the "context restored" stop and signal) to + * restore the correct SPU status. + * + * NOTE: Rather than modifying the SPU executable, we + * instead add a new 'stopped_status' field to the + * LSCSA. The SPU-side restore reads this field and + * takes the appropriate action when exiting. + */ + + status_code = + (csa->prob.spu_status_R >> SPU_STOP_STATUS_SHIFT) & 0xFFFF; + if ((csa->prob.spu_status_R & status_P_I) == status_P_I) { + + /* SPU_Status[P,I]=1 - Illegal Instruction followed + * by Stop and Signal instruction, followed by 'br -4'. + * + */ + csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_P_I; + csa->lscsa->stopped_status.slot[1] = status_code; + + } else if ((csa->prob.spu_status_R & status_P_H) == status_P_H) { + + /* SPU_Status[P,H]=1 - Halt Conditional, followed + * by Stop and Signal instruction, followed by + * 'br -4'. + */ + csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_P_H; + csa->lscsa->stopped_status.slot[1] = status_code; + + } else if ((csa->prob.spu_status_R & status_S_P) == status_S_P) { + + /* SPU_Status[S,P]=1 - Stop and Signal instruction + * followed by 'br -4'. + */ + csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_S_P; + csa->lscsa->stopped_status.slot[1] = status_code; + + } else if ((csa->prob.spu_status_R & status_S_I) == status_S_I) { + + /* SPU_Status[S,I]=1 - Illegal instruction followed + * by 'br -4'. + */ + csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_S_I; + csa->lscsa->stopped_status.slot[1] = status_code; + + } else if ((csa->prob.spu_status_R & status_P) == status_P) { + + /* SPU_Status[P]=1 - Stop and Signal instruction + * followed by 'br -4'. + */ + csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_P; + csa->lscsa->stopped_status.slot[1] = status_code; + + } else if ((csa->prob.spu_status_R & status_H) == status_H) { + + /* SPU_Status[H]=1 - Halt Conditional, followed + * by 'br -4'. + */ + csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_H; + + } else if ((csa->prob.spu_status_R & status_S) == status_S) { + + /* SPU_Status[S]=1 - Two nop instructions. + */ + csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_S; + + } else if ((csa->prob.spu_status_R & status_I) == status_I) { + + /* SPU_Status[I]=1 - Illegal instruction followed + * by 'br -4'. + */ + csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_I; + + } +} + +static inline void setup_spu_status_part2(struct spu_state *csa, + struct spu *spu) +{ + u32 mask; + + /* Restore, Step 28: + * If the CSA.SPU_Status[I,S,H,P,R]=0 then + * add a 'br *' instruction to the end of + * the SPU based restore code. + * + * NOTE: Rather than modifying the SPU executable, we + * instead add a new 'stopped_status' field to the + * LSCSA. The SPU-side restore reads this field and + * takes the appropriate action when exiting. + */ + mask = SPU_STATUS_INVALID_INSTR | + SPU_STATUS_SINGLE_STEP | + SPU_STATUS_STOPPED_BY_HALT | + SPU_STATUS_STOPPED_BY_STOP | SPU_STATUS_RUNNING; + if (!(csa->prob.spu_status_R & mask)) { + csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_R; + } +} + +static inline void restore_mfc_rag(struct spu_state *csa, struct spu *spu) +{ + /* Restore, Step 29: + * Restore RA_GROUP_ID register and the + * RA_ENABLE reigster from the CSA. + */ + spu_resource_allocation_groupID_set(spu, + csa->priv1.resource_allocation_groupID_RW); + spu_resource_allocation_enable_set(spu, + csa->priv1.resource_allocation_enable_RW); +} + +static inline void send_restore_code(struct spu_state *csa, struct spu *spu) +{ + unsigned long addr = (unsigned long)&spu_restore_code[0]; + unsigned int ls_offset = 0x0; + unsigned int size = sizeof(spu_restore_code); + unsigned int tag = 0; + unsigned int rclass = 0; + unsigned int cmd = MFC_GETFS_CMD; + + /* Restore, Step 37: + * Issue MFC DMA command to copy context + * restore code to local storage. + */ + send_mfc_dma(spu, addr, ls_offset, size, tag, rclass, cmd); +} + +static inline void setup_decr(struct spu_state *csa, struct spu *spu) +{ + /* Restore, Step 34: + * If CSA.MFC_CNTL[Ds]=1 (decrementer was + * running) then adjust decrementer, set + * decrementer running status in LSCSA, + * and set decrementer "wrapped" status + * in LSCSA. + */ + if (csa->priv2.mfc_control_RW & MFC_CNTL_DECREMENTER_RUNNING) { + cycles_t resume_time = get_cycles(); + cycles_t delta_time = resume_time - csa->suspend_time; + + csa->lscsa->decr.slot[0] = delta_time; + } +} + +static inline void setup_ppu_mb(struct spu_state *csa, struct spu *spu) +{ + /* Restore, Step 35: + * Copy the CSA.PU_MB data into the LSCSA. + */ + csa->lscsa->ppu_mb.slot[0] = csa->prob.pu_mb_R; +} + +static inline void setup_ppuint_mb(struct spu_state *csa, struct spu *spu) +{ + /* Restore, Step 36: + * Copy the CSA.PUINT_MB data into the LSCSA. + */ + csa->lscsa->ppuint_mb.slot[0] = csa->priv2.puint_mb_R; +} + +static inline int check_restore_status(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + u32 complete; + + /* Restore, Step 40: + * If SPU_Status[P]=1 and SPU_Status[SC] = "success", + * context restore succeeded, otherwise context restore + * failed. + */ + complete = ((SPU_RESTORE_COMPLETE << SPU_STOP_STATUS_SHIFT) | + SPU_STATUS_STOPPED_BY_STOP); + return (in_be32(&prob->spu_status_R) != complete) ? 1 : 0; +} + +static inline void restore_spu_privcntl(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Restore, Step 41: + * Restore SPU_PrivCntl from the CSA. + */ + out_be64(&priv2->spu_privcntl_RW, csa->priv2.spu_privcntl_RW); + eieio(); +} + +static inline void restore_status_part1(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + u32 mask; + + /* Restore, Step 42: + * If any CSA.SPU_Status[I,S,H,P]=1, then + * restore the error or single step state. + */ + mask = SPU_STATUS_INVALID_INSTR | + SPU_STATUS_SINGLE_STEP | + SPU_STATUS_STOPPED_BY_HALT | SPU_STATUS_STOPPED_BY_STOP; + if (csa->prob.spu_status_R & mask) { + out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_RUNNABLE); + eieio(); + POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) & + SPU_STATUS_RUNNING); + } +} + +static inline void restore_status_part2(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + u32 mask; + + /* Restore, Step 43: + * If all CSA.SPU_Status[I,S,H,P,R]=0 then write + * SPU_RunCntl[R0R1]='01', wait for SPU_Status[R]=1, + * then write '00' to SPU_RunCntl[R0R1] and wait + * for SPU_Status[R]=0. + */ + mask = SPU_STATUS_INVALID_INSTR | + SPU_STATUS_SINGLE_STEP | + SPU_STATUS_STOPPED_BY_HALT | + SPU_STATUS_STOPPED_BY_STOP | SPU_STATUS_RUNNING; + if (!(csa->prob.spu_status_R & mask)) { + out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_RUNNABLE); + eieio(); + POLL_WHILE_FALSE(in_be32(&prob->spu_status_R) & + SPU_STATUS_RUNNING); + out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_STOP); + eieio(); + POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) & + SPU_STATUS_RUNNING); + } +} + +static inline void restore_ls_16kb(struct spu_state *csa, struct spu *spu) +{ + unsigned long addr = (unsigned long)&csa->lscsa->ls[0]; + unsigned int ls_offset = 0x0; + unsigned int size = 16384; + unsigned int tag = 0; + unsigned int rclass = 0; + unsigned int cmd = MFC_GET_CMD; + + /* Restore, Step 44: + * Issue a DMA command to restore the first + * 16kb of local storage from CSA. + */ + send_mfc_dma(spu, addr, ls_offset, size, tag, rclass, cmd); +} + +static inline void clear_interrupts(struct spu_state *csa, struct spu *spu) +{ + /* Restore, Step 49: + * Write INT_MASK_class0 with value of 0. + * Write INT_MASK_class1 with value of 0. + * Write INT_MASK_class2 with value of 0. + * Write INT_STAT_class0 with value of -1. + * Write INT_STAT_class1 with value of -1. + * Write INT_STAT_class2 with value of -1. + */ + spin_lock_irq(&spu->register_lock); + spu_int_mask_set(spu, 0, 0ul); + spu_int_mask_set(spu, 1, 0ul); + spu_int_mask_set(spu, 2, 0ul); + spu_int_stat_clear(spu, 0, ~0ul); + spu_int_stat_clear(spu, 1, ~0ul); + spu_int_stat_clear(spu, 2, ~0ul); + spin_unlock_irq(&spu->register_lock); +} + +static inline void restore_mfc_queues(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + int i; + + /* Restore, Step 50: + * If MFC_Cntl[Se]!=0 then restore + * MFC command queues. + */ + if ((csa->priv2.mfc_control_RW & MFC_CNTL_DMA_QUEUES_EMPTY_MASK) == 0) { + for (i = 0; i < 8; i++) { + out_be64(&priv2->puq[i].mfc_cq_data0_RW, + csa->priv2.puq[i].mfc_cq_data0_RW); + out_be64(&priv2->puq[i].mfc_cq_data1_RW, + csa->priv2.puq[i].mfc_cq_data1_RW); + out_be64(&priv2->puq[i].mfc_cq_data2_RW, + csa->priv2.puq[i].mfc_cq_data2_RW); + out_be64(&priv2->puq[i].mfc_cq_data3_RW, + csa->priv2.puq[i].mfc_cq_data3_RW); + } + for (i = 0; i < 16; i++) { + out_be64(&priv2->spuq[i].mfc_cq_data0_RW, + csa->priv2.spuq[i].mfc_cq_data0_RW); + out_be64(&priv2->spuq[i].mfc_cq_data1_RW, + csa->priv2.spuq[i].mfc_cq_data1_RW); + out_be64(&priv2->spuq[i].mfc_cq_data2_RW, + csa->priv2.spuq[i].mfc_cq_data2_RW); + out_be64(&priv2->spuq[i].mfc_cq_data3_RW, + csa->priv2.spuq[i].mfc_cq_data3_RW); + } + } + eieio(); +} + +static inline void restore_ppu_querymask(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + + /* Restore, Step 51: + * Restore the PPU_QueryMask register from CSA. + */ + out_be32(&prob->dma_querymask_RW, csa->prob.dma_querymask_RW); + eieio(); +} + +static inline void restore_ppu_querytype(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + + /* Restore, Step 52: + * Restore the PPU_QueryType register from CSA. + */ + out_be32(&prob->dma_querytype_RW, csa->prob.dma_querytype_RW); + eieio(); +} + +static inline void restore_mfc_csr_tsq(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Restore, Step 53: + * Restore the MFC_CSR_TSQ register from CSA. + */ + out_be64(&priv2->spu_tag_status_query_RW, + csa->priv2.spu_tag_status_query_RW); + eieio(); +} + +static inline void restore_mfc_csr_cmd(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Restore, Step 54: + * Restore the MFC_CSR_CMD1 and MFC_CSR_CMD2 + * registers from CSA. + */ + out_be64(&priv2->spu_cmd_buf1_RW, csa->priv2.spu_cmd_buf1_RW); + out_be64(&priv2->spu_cmd_buf2_RW, csa->priv2.spu_cmd_buf2_RW); + eieio(); +} + +static inline void restore_mfc_csr_ato(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Restore, Step 55: + * Restore the MFC_CSR_ATO register from CSA. + */ + out_be64(&priv2->spu_atomic_status_RW, csa->priv2.spu_atomic_status_RW); +} + +static inline void restore_mfc_tclass_id(struct spu_state *csa, struct spu *spu) +{ + /* Restore, Step 56: + * Restore the MFC_TCLASS_ID register from CSA. + */ + spu_mfc_tclass_id_set(spu, csa->priv1.mfc_tclass_id_RW); + eieio(); +} + +static inline void set_llr_event(struct spu_state *csa, struct spu *spu) +{ + u64 ch0_cnt, ch0_data; + u64 ch1_data; + + /* Restore, Step 57: + * Set the Lock Line Reservation Lost Event by: + * 1. OR CSA.SPU_Event_Status with bit 21 (Lr) set to 1. + * 2. If CSA.SPU_Channel_0_Count=0 and + * CSA.SPU_Wr_Event_Mask[Lr]=1 and + * CSA.SPU_Event_Status[Lr]=0 then set + * CSA.SPU_Event_Status_Count=1. + */ + ch0_cnt = csa->spu_chnlcnt_RW[0]; + ch0_data = csa->spu_chnldata_RW[0]; + ch1_data = csa->spu_chnldata_RW[1]; + csa->spu_chnldata_RW[0] |= MFC_LLR_LOST_EVENT; + if ((ch0_cnt == 0) && !(ch0_data & MFC_LLR_LOST_EVENT) && + (ch1_data & MFC_LLR_LOST_EVENT)) { + csa->spu_chnlcnt_RW[0] = 1; + } +} + +static inline void restore_decr_wrapped(struct spu_state *csa, struct spu *spu) +{ + /* Restore, Step 58: + * If the status of the CSA software decrementer + * "wrapped" flag is set, OR in a '1' to + * CSA.SPU_Event_Status[Tm]. + */ + if (csa->lscsa->decr_status.slot[0] == 1) { + csa->spu_chnldata_RW[0] |= 0x20; + } + if ((csa->lscsa->decr_status.slot[0] == 1) && + (csa->spu_chnlcnt_RW[0] == 0 && + ((csa->spu_chnldata_RW[2] & 0x20) == 0x0) && + ((csa->spu_chnldata_RW[0] & 0x20) != 0x1))) { + csa->spu_chnlcnt_RW[0] = 1; + } +} + +static inline void restore_ch_part1(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + u64 idx, ch_indices[7] = { 0UL, 1UL, 3UL, 4UL, 24UL, 25UL, 27UL }; + int i; + + /* Restore, Step 59: + * Restore the following CH: [0,1,3,4,24,25,27] + */ + for (i = 0; i < 7; i++) { + idx = ch_indices[i]; + out_be64(&priv2->spu_chnlcntptr_RW, idx); + eieio(); + out_be64(&priv2->spu_chnldata_RW, csa->spu_chnldata_RW[idx]); + out_be64(&priv2->spu_chnlcnt_RW, csa->spu_chnlcnt_RW[idx]); + eieio(); + } +} + +static inline void restore_ch_part2(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + u64 ch_indices[3] = { 9UL, 21UL, 23UL }; + u64 ch_counts[3] = { 1UL, 16UL, 1UL }; + u64 idx; + int i; + + /* Restore, Step 60: + * Restore the following CH: [9,21,23]. + */ + ch_counts[0] = 1UL; + ch_counts[1] = csa->spu_chnlcnt_RW[21]; + ch_counts[2] = 1UL; + for (i = 0; i < 3; i++) { + idx = ch_indices[i]; + out_be64(&priv2->spu_chnlcntptr_RW, idx); + eieio(); + out_be64(&priv2->spu_chnlcnt_RW, ch_counts[i]); + eieio(); + } +} + +static inline void restore_spu_lslr(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Restore, Step 61: + * Restore the SPU_LSLR register from CSA. + */ + out_be64(&priv2->spu_lslr_RW, csa->priv2.spu_lslr_RW); + eieio(); +} + +static inline void restore_spu_cfg(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Restore, Step 62: + * Restore the SPU_Cfg register from CSA. + */ + out_be64(&priv2->spu_cfg_RW, csa->priv2.spu_cfg_RW); + eieio(); +} + +static inline void restore_pm_trace(struct spu_state *csa, struct spu *spu) +{ + /* Restore, Step 63: + * Restore PM_Trace_Tag_Wait_Mask from CSA. + * Not performed by this implementation. + */ +} + +static inline void restore_spu_npc(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + + /* Restore, Step 64: + * Restore SPU_NPC from CSA. + */ + out_be32(&prob->spu_npc_RW, csa->prob.spu_npc_RW); + eieio(); +} + +static inline void restore_spu_mb(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + int i; + + /* Restore, Step 65: + * Restore MFC_RdSPU_MB from CSA. + */ + out_be64(&priv2->spu_chnlcntptr_RW, 29UL); + eieio(); + out_be64(&priv2->spu_chnlcnt_RW, csa->spu_chnlcnt_RW[29]); + for (i = 0; i < 4; i++) { + out_be64(&priv2->spu_chnldata_RW, csa->spu_mailbox_data[i]); + } + eieio(); +} + +static inline void check_ppu_mb_stat(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + u32 dummy = 0; + + /* Restore, Step 66: + * If CSA.MB_Stat[P]=0 (mailbox empty) then + * read from the PPU_MB register. + */ + if ((csa->prob.mb_stat_R & 0xFF) == 0) { + dummy = in_be32(&prob->pu_mb_R); + eieio(); + } +} + +static inline void check_ppuint_mb_stat(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + u64 dummy = 0UL; + + /* Restore, Step 66: + * If CSA.MB_Stat[I]=0 (mailbox empty) then + * read from the PPUINT_MB register. + */ + if ((csa->prob.mb_stat_R & 0xFF0000) == 0) { + dummy = in_be64(&priv2->puint_mb_R); + eieio(); + spu_int_stat_clear(spu, 2, CLASS2_ENABLE_MAILBOX_INTR); + eieio(); + } +} + +static inline void restore_mfc_slbs(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + int i; + + /* Restore, Step 68: + * If MFC_SR1[R]='1', restore SLBs from CSA. + */ + if (csa->priv1.mfc_sr1_RW & MFC_STATE1_RELOCATE_MASK) { + for (i = 0; i < 8; i++) { + out_be64(&priv2->slb_index_W, i); + eieio(); + out_be64(&priv2->slb_esid_RW, csa->slb_esid_RW[i]); + out_be64(&priv2->slb_vsid_RW, csa->slb_vsid_RW[i]); + eieio(); + } + out_be64(&priv2->slb_index_W, csa->priv2.slb_index_W); + eieio(); + } +} + +static inline void restore_mfc_sr1(struct spu_state *csa, struct spu *spu) +{ + /* Restore, Step 69: + * Restore the MFC_SR1 register from CSA. + */ + spu_mfc_sr1_set(spu, csa->priv1.mfc_sr1_RW); + eieio(); +} + +static inline void restore_other_spu_access(struct spu_state *csa, + struct spu *spu) +{ + /* Restore, Step 70: + * Restore other SPU mappings to this SPU. TBD. + */ +} + +static inline void restore_spu_runcntl(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + + /* Restore, Step 71: + * If CSA.SPU_Status[R]=1 then write + * SPU_RunCntl[R0R1]='01'. + */ + if (csa->prob.spu_status_R & SPU_STATUS_RUNNING) { + out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_RUNNABLE); + eieio(); + } +} + +static inline void restore_mfc_cntl(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Restore, Step 72: + * Restore the MFC_CNTL register for the CSA. + */ + out_be64(&priv2->mfc_control_RW, csa->priv2.mfc_control_RW); + eieio(); +} + +static inline void enable_user_access(struct spu_state *csa, struct spu *spu) +{ + /* Restore, Step 73: + * Enable user-space access (if provided) to this + * SPU by mapping the virtual pages assigned to + * the SPU memory-mapped I/O (MMIO) for problem + * state. TBD. + */ +} + +static inline void reset_switch_active(struct spu_state *csa, struct spu *spu) +{ + /* Restore, Step 74: + * Reset the "context switch active" flag. + */ + clear_bit(SPU_CONTEXT_SWITCH_ACTIVE, &spu->flags); + mb(); +} + +static inline void reenable_interrupts(struct spu_state *csa, struct spu *spu) +{ + /* Restore, Step 75: + * Re-enable SPU interrupts. + */ + spin_lock_irq(&spu->register_lock); + spu_int_mask_set(spu, 0, csa->priv1.int_mask_class0_RW); + spu_int_mask_set(spu, 1, csa->priv1.int_mask_class1_RW); + spu_int_mask_set(spu, 2, csa->priv1.int_mask_class2_RW); + spin_unlock_irq(&spu->register_lock); +} + +static int quiece_spu(struct spu_state *prev, struct spu *spu) +{ + /* + * Combined steps 2-18 of SPU context save sequence, which + * quiesce the SPU state (disable SPU execution, MFC command + * queues, decrementer, SPU interrupts, etc.). + * + * Returns 0 on success. + * 2 if failed step 2. + * 6 if failed step 6. + */ + + if (check_spu_isolate(prev, spu)) { /* Step 2. */ + return 2; + } + disable_interrupts(prev, spu); /* Step 3. */ + set_watchdog_timer(prev, spu); /* Step 4. */ + inhibit_user_access(prev, spu); /* Step 5. */ + if (check_spu_isolate(prev, spu)) { /* Step 6. */ + return 6; + } + set_switch_pending(prev, spu); /* Step 7. */ + save_mfc_cntl(prev, spu); /* Step 8. */ + save_spu_runcntl(prev, spu); /* Step 9. */ + save_mfc_sr1(prev, spu); /* Step 10. */ + save_spu_status(prev, spu); /* Step 11. */ + save_mfc_decr(prev, spu); /* Step 12. */ + halt_mfc_decr(prev, spu); /* Step 13. */ + save_timebase(prev, spu); /* Step 14. */ + remove_other_spu_access(prev, spu); /* Step 15. */ + do_mfc_mssync(prev, spu); /* Step 16. */ + issue_mfc_tlbie(prev, spu); /* Step 17. */ + handle_pending_interrupts(prev, spu); /* Step 18. */ + + return 0; +} + +static void save_csa(struct spu_state *prev, struct spu *spu) +{ + /* + * Combine steps 19-44 of SPU context save sequence, which + * save regions of the privileged & problem state areas. + */ + + save_mfc_queues(prev, spu); /* Step 19. */ + save_ppu_querymask(prev, spu); /* Step 20. */ + save_ppu_querytype(prev, spu); /* Step 21. */ + save_mfc_csr_tsq(prev, spu); /* Step 22. */ + save_mfc_csr_cmd(prev, spu); /* Step 23. */ + save_mfc_csr_ato(prev, spu); /* Step 24. */ + save_mfc_tclass_id(prev, spu); /* Step 25. */ + set_mfc_tclass_id(prev, spu); /* Step 26. */ + purge_mfc_queue(prev, spu); /* Step 27. */ + wait_purge_complete(prev, spu); /* Step 28. */ + save_mfc_slbs(prev, spu); /* Step 29. */ + setup_mfc_sr1(prev, spu); /* Step 30. */ + save_spu_npc(prev, spu); /* Step 31. */ + save_spu_privcntl(prev, spu); /* Step 32. */ + reset_spu_privcntl(prev, spu); /* Step 33. */ + save_spu_lslr(prev, spu); /* Step 34. */ + reset_spu_lslr(prev, spu); /* Step 35. */ + save_spu_cfg(prev, spu); /* Step 36. */ + save_pm_trace(prev, spu); /* Step 37. */ + save_mfc_rag(prev, spu); /* Step 38. */ + save_ppu_mb_stat(prev, spu); /* Step 39. */ + save_ppu_mb(prev, spu); /* Step 40. */ + save_ppuint_mb(prev, spu); /* Step 41. */ + save_ch_part1(prev, spu); /* Step 42. */ + save_spu_mb(prev, spu); /* Step 43. */ + save_mfc_cmd(prev, spu); /* Step 44. */ + reset_ch(prev, spu); /* Step 45. */ +} + +static void save_lscsa(struct spu_state *prev, struct spu *spu) +{ + /* + * Perform steps 46-57 of SPU context save sequence, + * which save regions of the local store and register + * file. + */ + + resume_mfc_queue(prev, spu); /* Step 46. */ + setup_mfc_slbs(prev, spu); /* Step 47. */ + set_switch_active(prev, spu); /* Step 48. */ + enable_interrupts(prev, spu); /* Step 49. */ + save_ls_16kb(prev, spu); /* Step 50. */ + set_spu_npc(prev, spu); /* Step 51. */ + set_signot1(prev, spu); /* Step 52. */ + set_signot2(prev, spu); /* Step 53. */ + send_save_code(prev, spu); /* Step 54. */ + set_ppu_querymask(prev, spu); /* Step 55. */ + wait_tag_complete(prev, spu); /* Step 56. */ + wait_spu_stopped(prev, spu); /* Step 57. */ +} + +static void harvest(struct spu_state *prev, struct spu *spu) +{ + /* + * Perform steps 2-25 of SPU context restore sequence, + * which resets an SPU either after a failed save, or + * when using SPU for first time. + */ + + disable_interrupts(prev, spu); /* Step 2. */ + inhibit_user_access(prev, spu); /* Step 3. */ + terminate_spu_app(prev, spu); /* Step 4. */ + set_switch_pending(prev, spu); /* Step 5. */ + remove_other_spu_access(prev, spu); /* Step 6. */ + suspend_mfc(prev, spu); /* Step 7. */ + wait_suspend_mfc_complete(prev, spu); /* Step 8. */ + if (!suspend_spe(prev, spu)) /* Step 9. */ + clear_spu_status(prev, spu); /* Step 10. */ + do_mfc_mssync(prev, spu); /* Step 11. */ + issue_mfc_tlbie(prev, spu); /* Step 12. */ + handle_pending_interrupts(prev, spu); /* Step 13. */ + purge_mfc_queue(prev, spu); /* Step 14. */ + wait_purge_complete(prev, spu); /* Step 15. */ + reset_spu_privcntl(prev, spu); /* Step 16. */ + reset_spu_lslr(prev, spu); /* Step 17. */ + setup_mfc_sr1(prev, spu); /* Step 18. */ + invalidate_slbs(prev, spu); /* Step 19. */ + reset_ch_part1(prev, spu); /* Step 20. */ + reset_ch_part2(prev, spu); /* Step 21. */ + enable_interrupts(prev, spu); /* Step 22. */ + set_switch_active(prev, spu); /* Step 23. */ + set_mfc_tclass_id(prev, spu); /* Step 24. */ + resume_mfc_queue(prev, spu); /* Step 25. */ +} + +static void restore_lscsa(struct spu_state *next, struct spu *spu) +{ + /* + * Perform steps 26-40 of SPU context restore sequence, + * which restores regions of the local store and register + * file. + */ + + set_watchdog_timer(next, spu); /* Step 26. */ + setup_spu_status_part1(next, spu); /* Step 27. */ + setup_spu_status_part2(next, spu); /* Step 28. */ + restore_mfc_rag(next, spu); /* Step 29. */ + setup_mfc_slbs(next, spu); /* Step 30. */ + set_spu_npc(next, spu); /* Step 31. */ + set_signot1(next, spu); /* Step 32. */ + set_signot2(next, spu); /* Step 33. */ + setup_decr(next, spu); /* Step 34. */ + setup_ppu_mb(next, spu); /* Step 35. */ + setup_ppuint_mb(next, spu); /* Step 36. */ + send_restore_code(next, spu); /* Step 37. */ + set_ppu_querymask(next, spu); /* Step 38. */ + wait_tag_complete(next, spu); /* Step 39. */ + wait_spu_stopped(next, spu); /* Step 40. */ +} + +static void restore_csa(struct spu_state *next, struct spu *spu) +{ + /* + * Combine steps 41-76 of SPU context restore sequence, which + * restore regions of the privileged & problem state areas. + */ + + restore_spu_privcntl(next, spu); /* Step 41. */ + restore_status_part1(next, spu); /* Step 42. */ + restore_status_part2(next, spu); /* Step 43. */ + restore_ls_16kb(next, spu); /* Step 44. */ + wait_tag_complete(next, spu); /* Step 45. */ + suspend_mfc(next, spu); /* Step 46. */ + wait_suspend_mfc_complete(next, spu); /* Step 47. */ + issue_mfc_tlbie(next, spu); /* Step 48. */ + clear_interrupts(next, spu); /* Step 49. */ + restore_mfc_queues(next, spu); /* Step 50. */ + restore_ppu_querymask(next, spu); /* Step 51. */ + restore_ppu_querytype(next, spu); /* Step 52. */ + restore_mfc_csr_tsq(next, spu); /* Step 53. */ + restore_mfc_csr_cmd(next, spu); /* Step 54. */ + restore_mfc_csr_ato(next, spu); /* Step 55. */ + restore_mfc_tclass_id(next, spu); /* Step 56. */ + set_llr_event(next, spu); /* Step 57. */ + restore_decr_wrapped(next, spu); /* Step 58. */ + restore_ch_part1(next, spu); /* Step 59. */ + restore_ch_part2(next, spu); /* Step 60. */ + restore_spu_lslr(next, spu); /* Step 61. */ + restore_spu_cfg(next, spu); /* Step 62. */ + restore_pm_trace(next, spu); /* Step 63. */ + restore_spu_npc(next, spu); /* Step 64. */ + restore_spu_mb(next, spu); /* Step 65. */ + check_ppu_mb_stat(next, spu); /* Step 66. */ + check_ppuint_mb_stat(next, spu); /* Step 67. */ + restore_mfc_slbs(next, spu); /* Step 68. */ + restore_mfc_sr1(next, spu); /* Step 69. */ + restore_other_spu_access(next, spu); /* Step 70. */ + restore_spu_runcntl(next, spu); /* Step 71. */ + restore_mfc_cntl(next, spu); /* Step 72. */ + enable_user_access(next, spu); /* Step 73. */ + reset_switch_active(next, spu); /* Step 74. */ + reenable_interrupts(next, spu); /* Step 75. */ +} + +static int __do_spu_save(struct spu_state *prev, struct spu *spu) +{ + int rc; + + /* + * SPU context save can be broken into three phases: + * + * (a) quiesce [steps 2-16]. + * (b) save of CSA, performed by PPE [steps 17-42] + * (c) save of LSCSA, mostly performed by SPU [steps 43-52]. + * + * Returns 0 on success. + * 2,6 if failed to quiece SPU + * 53 if SPU-side of save failed. + */ + + rc = quiece_spu(prev, spu); /* Steps 2-16. */ + switch (rc) { + default: + case 2: + case 6: + harvest(prev, spu); + return rc; + break; + case 0: + break; + } + save_csa(prev, spu); /* Steps 17-43. */ + save_lscsa(prev, spu); /* Steps 44-53. */ + return check_save_status(prev, spu); /* Step 54. */ +} + +static int __do_spu_restore(struct spu_state *next, struct spu *spu) +{ + int rc; + + /* + * SPU context restore can be broken into three phases: + * + * (a) harvest (or reset) SPU [steps 2-24]. + * (b) restore LSCSA [steps 25-40], mostly performed by SPU. + * (c) restore CSA [steps 41-76], performed by PPE. + * + * The 'harvest' step is not performed here, but rather + * as needed below. + */ + + restore_lscsa(next, spu); /* Steps 24-39. */ + rc = check_restore_status(next, spu); /* Step 40. */ + switch (rc) { + default: + /* Failed. Return now. */ + return rc; + break; + case 0: + /* Fall through to next step. */ + break; + } + restore_csa(next, spu); + + return 0; +} + +/** + * spu_save - SPU context save, with locking. + * @prev: pointer to SPU context save area, to be saved. + * @spu: pointer to SPU iomem structure. + * + * Acquire locks, perform the save operation then return. + */ +int spu_save(struct spu_state *prev, struct spu *spu) +{ + int rc; + + acquire_spu_lock(spu); /* Step 1. */ + rc = __do_spu_save(prev, spu); /* Steps 2-53. */ + release_spu_lock(spu); + if (rc) { + panic("%s failed on SPU[%d], rc=%d.\n", + __func__, spu->number, rc); + } + return rc; +} + +/** + * spu_restore - SPU context restore, with harvest and locking. + * @new: pointer to SPU context save area, to be restored. + * @spu: pointer to SPU iomem structure. + * + * Perform harvest + restore, as we may not be coming + * from a previous succesful save operation, and the + * hardware state is unknown. + */ +int spu_restore(struct spu_state *new, struct spu *spu) +{ + int rc; + + acquire_spu_lock(spu); + harvest(NULL, spu); + spu->stop_code = 0; + spu->dar = 0; + spu->dsisr = 0; + spu->slb_replace = 0; + spu->class_0_pending = 0; + rc = __do_spu_restore(new, spu); + release_spu_lock(spu); + if (rc) { + panic("%s failed on SPU[%d] rc=%d.\n", + __func__, spu->number, rc); + } + return rc; +} + +/** + * spu_harvest - SPU harvest (reset) operation + * @spu: pointer to SPU iomem structure. + * + * Perform SPU harvest (reset) operation. + */ +void spu_harvest(struct spu *spu) +{ + acquire_spu_lock(spu); + harvest(NULL, spu); + release_spu_lock(spu); +} + +static void init_prob(struct spu_state *csa) +{ + csa->spu_chnlcnt_RW[9] = 1; + csa->spu_chnlcnt_RW[21] = 16; + csa->spu_chnlcnt_RW[23] = 1; + csa->spu_chnlcnt_RW[28] = 1; + csa->spu_chnlcnt_RW[30] = 1; + csa->prob.spu_runcntl_RW = SPU_RUNCNTL_STOP; +} + +static void init_priv1(struct spu_state *csa) +{ + /* Enable decode, relocate, tlbie response, master runcntl. */ + csa->priv1.mfc_sr1_RW = MFC_STATE1_LOCAL_STORAGE_DECODE_MASK | + MFC_STATE1_MASTER_RUN_CONTROL_MASK | + MFC_STATE1_PROBLEM_STATE_MASK | + MFC_STATE1_RELOCATE_MASK | MFC_STATE1_BUS_TLBIE_MASK; + + /* Set storage description. */ + csa->priv1.mfc_sdr_RW = mfspr(SPRN_SDR1); + + /* Enable OS-specific set of interrupts. */ + csa->priv1.int_mask_class0_RW = CLASS0_ENABLE_DMA_ALIGNMENT_INTR | + CLASS0_ENABLE_INVALID_DMA_COMMAND_INTR | + CLASS0_ENABLE_SPU_ERROR_INTR; + csa->priv1.int_mask_class1_RW = CLASS1_ENABLE_SEGMENT_FAULT_INTR | + CLASS1_ENABLE_STORAGE_FAULT_INTR; + csa->priv1.int_mask_class2_RW = CLASS2_ENABLE_SPU_STOP_INTR | + CLASS2_ENABLE_SPU_HALT_INTR; +} + +static void init_priv2(struct spu_state *csa) +{ + csa->priv2.spu_lslr_RW = LS_ADDR_MASK; + csa->priv2.mfc_control_RW = MFC_CNTL_RESUME_DMA_QUEUE | + MFC_CNTL_NORMAL_DMA_QUEUE_OPERATION | + MFC_CNTL_DMA_QUEUES_EMPTY_MASK; +} + +/** + * spu_alloc_csa - allocate and initialize an SPU context save area. + * + * Allocate and initialize the contents of an SPU context save area. + * This includes enabling address translation, interrupt masks, etc., + * as appropriate for the given OS environment. + * + * Note that storage for the 'lscsa' is allocated separately, + * as it is by far the largest of the context save regions, + * and may need to be pinned or otherwise specially aligned. + */ +void spu_init_csa(struct spu_state *csa) +{ + struct spu_lscsa *lscsa; + unsigned char *p; + + if (!csa) + return; + memset(csa, 0, sizeof(struct spu_state)); + + lscsa = vmalloc(sizeof(struct spu_lscsa)); + if (!lscsa) + return; + + memset(lscsa, 0, sizeof(struct spu_lscsa)); + csa->lscsa = lscsa; + csa->register_lock = SPIN_LOCK_UNLOCKED; + + /* Set LS pages reserved to allow for user-space mapping. */ + for (p = lscsa->ls; p < lscsa->ls + LS_SIZE; p += PAGE_SIZE) + SetPageReserved(vmalloc_to_page(p)); + + init_prob(csa); + init_priv1(csa); + init_priv2(csa); +} + +void spu_fini_csa(struct spu_state *csa) +{ + /* Clear reserved bit before vfree. */ + unsigned char *p; + for (p = csa->lscsa->ls; p < csa->lscsa->ls + LS_SIZE; p += PAGE_SIZE) + ClearPageReserved(vmalloc_to_page(p)); + + vfree(csa->lscsa); +} diff --git a/arch/powerpc/platforms/cell/spufs/syscalls.c b/arch/powerpc/platforms/cell/spufs/syscalls.c new file mode 100644 index 0000000..d549aa7 --- /dev/null +++ b/arch/powerpc/platforms/cell/spufs/syscalls.c @@ -0,0 +1,101 @@ +#include <linux/file.h> +#include <linux/fs.h> +#include <linux/module.h> +#include <linux/mount.h> +#include <linux/namei.h> + +#include <asm/uaccess.h> + +#include "spufs.h" + +/** + * sys_spu_run - run code loaded into an SPU + * + * @unpc: next program counter for the SPU + * @ustatus: status of the SPU + * + * This system call transfers the control of execution of a + * user space thread to an SPU. It will return when the + * SPU has finished executing or when it hits an error + * condition and it will be interrupted if a signal needs + * to be delivered to a handler in user space. + * + * The next program counter is set to the passed value + * before the SPU starts fetching code and the user space + * pointer gets updated with the new value when returning + * from kernel space. + * + * The status value returned from spu_run reflects the + * value of the spu_status register after the SPU has stopped. + * + */ +long do_spu_run(struct file *filp, __u32 __user *unpc, __u32 __user *ustatus) +{ + long ret; + struct spufs_inode_info *i; + u32 npc, status; + + ret = -EFAULT; + if (get_user(npc, unpc) || get_user(status, ustatus)) + goto out; + + /* check if this file was created by spu_create */ + ret = -EINVAL; + if (filp->f_op != &spufs_context_fops) + goto out; + + i = SPUFS_I(filp->f_dentry->d_inode); + ret = spufs_run_spu(filp, i->i_ctx, &npc, &status); + + if (put_user(npc, unpc) || put_user(status, ustatus)) + ret = -EFAULT; +out: + return ret; +} + +#ifndef MODULE +asmlinkage long sys_spu_run(int fd, __u32 __user *unpc, __u32 __user *ustatus) +{ + int fput_needed; + struct file *filp; + long ret; + + ret = -EBADF; + filp = fget_light(fd, &fput_needed); + if (filp) { + ret = do_spu_run(filp, unpc, ustatus); + fput_light(filp, fput_needed); + } + + return ret; +} +#endif + +asmlinkage long sys_spu_create(const char __user *pathname, + unsigned int flags, mode_t mode) +{ + char *tmp; + int ret; + + tmp = getname(pathname); + ret = PTR_ERR(tmp); + if (!IS_ERR(tmp)) { + struct nameidata nd; + + ret = path_lookup(tmp, LOOKUP_PARENT| + LOOKUP_OPEN|LOOKUP_CREATE, &nd); + if (!ret) { + ret = spufs_create_thread(&nd, flags, mode); + path_release(&nd); + } + putname(tmp); + } + + return ret; +} + +struct spufs_calls spufs_calls = { + .create_thread = sys_spu_create, + .spu_run = do_spu_run, + .owner = THIS_MODULE, +}; diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c index dda5f2c..4ec8ba7 100644 --- a/arch/powerpc/platforms/chrp/setup.c +++ b/arch/powerpc/platforms/chrp/setup.c @@ -49,7 +49,6 @@ #include <asm/hydra.h> #include <asm/sections.h> #include <asm/time.h> -#include <asm/btext.h> #include <asm/i8259.h> #include <asm/mpic.h> #include <asm/rtas.h> @@ -58,7 +57,6 @@ #include "chrp.h" void rtas_indicator_progress(char *, unsigned short); -void btext_progress(char *, unsigned short); int _chrp_type; EXPORT_SYMBOL(_chrp_type); @@ -264,11 +262,6 @@ void __init chrp_setup_arch(void) ppc_md.set_rtc_time = rtas_set_rtc_time; } -#ifdef CONFIG_BOOTX_TEXT - if (ppc_md.progress == NULL && boot_text_mapped) - ppc_md.progress = btext_progress; -#endif - #ifdef CONFIG_BLK_DEV_INITRD /* this is fine for chrp */ initrd_below_start_ok = 1; @@ -522,12 +515,3 @@ void __init chrp_init(void) smp_ops = &chrp_smp_ops; #endif /* CONFIG_SMP */ } - -#ifdef CONFIG_BOOTX_TEXT -void -btext_progress(char *s, unsigned short hex) -{ - btext_drawstring(s); - btext_drawstring("\n"); -} -#endif /* CONFIG_BOOTX_TEXT */ diff --git a/arch/powerpc/platforms/iseries/irq.c b/arch/powerpc/platforms/iseries/irq.c index a58daa1..42e978e 100644 --- a/arch/powerpc/platforms/iseries/irq.c +++ b/arch/powerpc/platforms/iseries/irq.c @@ -35,161 +35,138 @@ #include <linux/irq.h> #include <linux/spinlock.h> +#include <asm/paca.h> #include <asm/iseries/hv_types.h> #include <asm/iseries/hv_lp_event.h> #include <asm/iseries/hv_call_xm.h> +#include <asm/iseries/it_lp_queue.h> #include "irq.h" #include "call_pci.h" -static long Pci_Interrupt_Count; -static long Pci_Event_Count; - -enum XmPciLpEvent_Subtype { - XmPciLpEvent_BusCreated = 0, // PHB has been created - XmPciLpEvent_BusError = 1, // PHB has failed - XmPciLpEvent_BusFailed = 2, // Msg to Secondary, Primary failed bus - XmPciLpEvent_NodeFailed = 4, // Multi-adapter bridge has failed - XmPciLpEvent_NodeRecovered = 5, // Multi-adapter bridge has recovered - XmPciLpEvent_BusRecovered = 12, // PHB has been recovered - XmPciLpEvent_UnQuiesceBus = 18, // Secondary bus unqiescing - XmPciLpEvent_BridgeError = 21, // Bridge Error - XmPciLpEvent_SlotInterrupt = 22 // Slot interrupt -}; - -struct XmPciLpEvent_BusInterrupt { - HvBusNumber busNumber; - HvSubBusNumber subBusNumber; -}; +#if defined(CONFIG_SMP) +extern void iSeries_smp_message_recv(struct pt_regs *); +#endif -struct XmPciLpEvent_NodeInterrupt { - HvBusNumber busNumber; - HvSubBusNumber subBusNumber; - HvAgentId deviceId; +enum pci_event_type { + pe_bus_created = 0, /* PHB has been created */ + pe_bus_error = 1, /* PHB has failed */ + pe_bus_failed = 2, /* Msg to Secondary, Primary failed bus */ + pe_node_failed = 4, /* Multi-adapter bridge has failed */ + pe_node_recovered = 5, /* Multi-adapter bridge has recovered */ + pe_bus_recovered = 12, /* PHB has been recovered */ + pe_unquiese_bus = 18, /* Secondary bus unqiescing */ + pe_bridge_error = 21, /* Bridge Error */ + pe_slot_interrupt = 22 /* Slot interrupt */ }; -struct XmPciLpEvent { - struct HvLpEvent hvLpEvent; - +struct pci_event { + struct HvLpEvent event; union { - u64 alignData; // Align on an 8-byte boundary - + u64 __align; /* Align on an 8-byte boundary */ struct { u32 fisr; - HvBusNumber busNumber; - HvSubBusNumber subBusNumber; - HvAgentId deviceId; - } slotInterrupt; - - struct XmPciLpEvent_BusInterrupt busFailed; - struct XmPciLpEvent_BusInterrupt busRecovered; - struct XmPciLpEvent_BusInterrupt busCreated; - - struct XmPciLpEvent_NodeInterrupt nodeFailed; - struct XmPciLpEvent_NodeInterrupt nodeRecovered; - - } eventData; - + HvBusNumber bus_number; + HvSubBusNumber sub_bus_number; + HvAgentId dev_id; + } slot; + struct { + HvBusNumber bus_number; + HvSubBusNumber sub_bus_number; + } bus; + struct { + HvBusNumber bus_number; + HvSubBusNumber sub_bus_number; + HvAgentId dev_id; + } node; + } data; }; -static void intReceived(struct XmPciLpEvent *eventParm, - struct pt_regs *regsParm) +static DEFINE_SPINLOCK(pending_irqs_lock); +static int num_pending_irqs; +static int pending_irqs[NR_IRQS]; + +static void int_received(struct pci_event *event, struct pt_regs *regs) { int irq; -#ifdef CONFIG_IRQSTACKS - struct thread_info *curtp, *irqtp; -#endif - ++Pci_Interrupt_Count; - - switch (eventParm->hvLpEvent.xSubtype) { - case XmPciLpEvent_SlotInterrupt: - irq = eventParm->hvLpEvent.xCorrelationToken; - /* Dispatch the interrupt handlers for this irq */ -#ifdef CONFIG_IRQSTACKS - /* Switch to the irq stack to handle this */ - curtp = current_thread_info(); - irqtp = hardirq_ctx[smp_processor_id()]; - if (curtp != irqtp) { - irqtp->task = curtp->task; - irqtp->flags = 0; - call___do_IRQ(irq, regsParm, irqtp); - irqtp->task = NULL; - if (irqtp->flags) - set_bits(irqtp->flags, &curtp->flags); - } else -#endif - __do_IRQ(irq, regsParm); - HvCallPci_eoi(eventParm->eventData.slotInterrupt.busNumber, - eventParm->eventData.slotInterrupt.subBusNumber, - eventParm->eventData.slotInterrupt.deviceId); + switch (event->event.xSubtype) { + case pe_slot_interrupt: + irq = event->event.xCorrelationToken; + if (irq < NR_IRQS) { + spin_lock(&pending_irqs_lock); + pending_irqs[irq]++; + num_pending_irqs++; + spin_unlock(&pending_irqs_lock); + } else { + printk(KERN_WARNING "int_received: bad irq number %d\n", + irq); + HvCallPci_eoi(event->data.slot.bus_number, + event->data.slot.sub_bus_number, + event->data.slot.dev_id); + } break; /* Ignore error recovery events for now */ - case XmPciLpEvent_BusCreated: - printk(KERN_INFO "intReceived: system bus %d created\n", - eventParm->eventData.busCreated.busNumber); + case pe_bus_created: + printk(KERN_INFO "int_received: system bus %d created\n", + event->data.bus.bus_number); break; - case XmPciLpEvent_BusError: - case XmPciLpEvent_BusFailed: - printk(KERN_INFO "intReceived: system bus %d failed\n", - eventParm->eventData.busFailed.busNumber); + case pe_bus_error: + case pe_bus_failed: + printk(KERN_INFO "int_received: system bus %d failed\n", + event->data.bus.bus_number); break; - case XmPciLpEvent_BusRecovered: - case XmPciLpEvent_UnQuiesceBus: - printk(KERN_INFO "intReceived: system bus %d recovered\n", - eventParm->eventData.busRecovered.busNumber); + case pe_bus_recovered: + case pe_unquiese_bus: + printk(KERN_INFO "int_received: system bus %d recovered\n", + event->data.bus.bus_number); break; - case XmPciLpEvent_NodeFailed: - case XmPciLpEvent_BridgeError: + case pe_node_failed: + case pe_bridge_error: printk(KERN_INFO - "intReceived: multi-adapter bridge %d/%d/%d failed\n", - eventParm->eventData.nodeFailed.busNumber, - eventParm->eventData.nodeFailed.subBusNumber, - eventParm->eventData.nodeFailed.deviceId); + "int_received: multi-adapter bridge %d/%d/%d failed\n", + event->data.node.bus_number, + event->data.node.sub_bus_number, + event->data.node.dev_id); break; - case XmPciLpEvent_NodeRecovered: + case pe_node_recovered: printk(KERN_INFO - "intReceived: multi-adapter bridge %d/%d/%d recovered\n", - eventParm->eventData.nodeRecovered.busNumber, - eventParm->eventData.nodeRecovered.subBusNumber, - eventParm->eventData.nodeRecovered.deviceId); + "int_received: multi-adapter bridge %d/%d/%d recovered\n", + event->data.node.bus_number, + event->data.node.sub_bus_number, + event->data.node.dev_id); break; default: printk(KERN_ERR - "intReceived: unrecognized event subtype 0x%x\n", - eventParm->hvLpEvent.xSubtype); + "int_received: unrecognized event subtype 0x%x\n", + event->event.xSubtype); break; } } -static void XmPciLpEvent_handler(struct HvLpEvent *eventParm, - struct pt_regs *regsParm) +static void pci_event_handler(struct HvLpEvent *event, struct pt_regs *regs) { -#ifdef CONFIG_PCI - ++Pci_Event_Count; - - if (eventParm && (eventParm->xType == HvLpEvent_Type_PciIo)) { - switch (eventParm->xFlags.xFunction) { + if (event && (event->xType == HvLpEvent_Type_PciIo)) { + switch (event->xFlags.xFunction) { case HvLpEvent_Function_Int: - intReceived((struct XmPciLpEvent *)eventParm, regsParm); + int_received((struct pci_event *)event, regs); break; case HvLpEvent_Function_Ack: printk(KERN_ERR - "XmPciLpEvent_handler: unexpected ack received\n"); + "pci_event_handler: unexpected ack received\n"); break; default: printk(KERN_ERR - "XmPciLpEvent_handler: unexpected event function %d\n", - (int)eventParm->xFlags.xFunction); + "pci_event_handler: unexpected event function %d\n", + (int)event->xFlags.xFunction); break; } - } else if (eventParm) + } else if (event) printk(KERN_ERR - "XmPciLpEvent_handler: Unrecognized PCI event type 0x%x\n", - (int)eventParm->xType); + "pci_event_handler: Unrecognized PCI event type 0x%x\n", + (int)event->xType); else - printk(KERN_ERR "XmPciLpEvent_handler: NULL event received\n"); -#endif + printk(KERN_ERR "pci_event_handler: NULL event received\n"); } /* @@ -199,20 +176,21 @@ static void XmPciLpEvent_handler(struct HvLpEvent *eventParm, void __init iSeries_init_IRQ(void) { /* Register PCI event handler and open an event path */ - int xRc; - - xRc = HvLpEvent_registerHandler(HvLpEvent_Type_PciIo, - &XmPciLpEvent_handler); - if (xRc == 0) { - xRc = HvLpEvent_openPath(HvLpEvent_Type_PciIo, 0); - if (xRc != 0) - printk(KERN_ERR "iSeries_init_IRQ: open event path " - "failed with rc 0x%x\n", xRc); + int ret; + + ret = HvLpEvent_registerHandler(HvLpEvent_Type_PciIo, + &pci_event_handler); + if (ret == 0) { + ret = HvLpEvent_openPath(HvLpEvent_Type_PciIo, 0); + if (ret != 0) + printk(KERN_ERR "iseries_init_IRQ: open event path " + "failed with rc 0x%x\n", ret); } else - printk(KERN_ERR "iSeries_init_IRQ: register handler " - "failed with rc 0x%x\n", xRc); + printk(KERN_ERR "iseries_init_IRQ: register handler " + "failed with rc 0x%x\n", ret); } +#define REAL_IRQ_TO_SUBBUS(irq) (((irq) >> 14) & 0xff) #define REAL_IRQ_TO_BUS(irq) ((((irq) >> 6) & 0xff) + 1) #define REAL_IRQ_TO_IDSEL(irq) ((((irq) >> 3) & 7) + 1) #define REAL_IRQ_TO_FUNC(irq) ((irq) & 7) @@ -221,40 +199,40 @@ void __init iSeries_init_IRQ(void) * This will be called by device drivers (via enable_IRQ) * to enable INTA in the bridge interrupt status register. */ -static void iSeries_enable_IRQ(unsigned int irq) +static void iseries_enable_IRQ(unsigned int irq) { - u32 bus, deviceId, function, mask; - const u32 subBus = 0; + u32 bus, dev_id, function, mask; + const u32 sub_bus = 0; unsigned int rirq = virt_irq_to_real_map[irq]; /* The IRQ has already been locked by the caller */ bus = REAL_IRQ_TO_BUS(rirq); function = REAL_IRQ_TO_FUNC(rirq); - deviceId = (REAL_IRQ_TO_IDSEL(rirq) << 4) + function; + dev_id = (REAL_IRQ_TO_IDSEL(rirq) << 4) + function; /* Unmask secondary INTA */ mask = 0x80000000; - HvCallPci_unmaskInterrupts(bus, subBus, deviceId, mask); + HvCallPci_unmaskInterrupts(bus, sub_bus, dev_id, mask); } -/* This is called by iSeries_activate_IRQs */ -static unsigned int iSeries_startup_IRQ(unsigned int irq) +/* This is called by iseries_activate_IRQs */ +static unsigned int iseries_startup_IRQ(unsigned int irq) { - u32 bus, deviceId, function, mask; - const u32 subBus = 0; + u32 bus, dev_id, function, mask; + const u32 sub_bus = 0; unsigned int rirq = virt_irq_to_real_map[irq]; bus = REAL_IRQ_TO_BUS(rirq); function = REAL_IRQ_TO_FUNC(rirq); - deviceId = (REAL_IRQ_TO_IDSEL(rirq) << 4) + function; + dev_id = (REAL_IRQ_TO_IDSEL(rirq) << 4) + function; /* Link the IRQ number to the bridge */ - HvCallXm_connectBusUnit(bus, subBus, deviceId, irq); + HvCallXm_connectBusUnit(bus, sub_bus, dev_id, irq); /* Unmask bridge interrupts in the FISR */ mask = 0x01010000 << function; - HvCallPci_unmaskFisr(bus, subBus, deviceId, mask); - iSeries_enable_IRQ(irq); + HvCallPci_unmaskFisr(bus, sub_bus, dev_id, mask); + iseries_enable_IRQ(irq); return 0; } @@ -279,78 +257,115 @@ void __init iSeries_activate_IRQs() } /* this is not called anywhere currently */ -static void iSeries_shutdown_IRQ(unsigned int irq) +static void iseries_shutdown_IRQ(unsigned int irq) { - u32 bus, deviceId, function, mask; - const u32 subBus = 0; + u32 bus, dev_id, function, mask; + const u32 sub_bus = 0; unsigned int rirq = virt_irq_to_real_map[irq]; /* irq should be locked by the caller */ bus = REAL_IRQ_TO_BUS(rirq); function = REAL_IRQ_TO_FUNC(rirq); - deviceId = (REAL_IRQ_TO_IDSEL(rirq) << 4) + function; + dev_id = (REAL_IRQ_TO_IDSEL(rirq) << 4) + function; /* Invalidate the IRQ number in the bridge */ - HvCallXm_connectBusUnit(bus, subBus, deviceId, 0); + HvCallXm_connectBusUnit(bus, sub_bus, dev_id, 0); /* Mask bridge interrupts in the FISR */ mask = 0x01010000 << function; - HvCallPci_maskFisr(bus, subBus, deviceId, mask); + HvCallPci_maskFisr(bus, sub_bus, dev_id, mask); } /* * This will be called by device drivers (via disable_IRQ) * to disable INTA in the bridge interrupt status register. */ -static void iSeries_disable_IRQ(unsigned int irq) +static void iseries_disable_IRQ(unsigned int irq) { - u32 bus, deviceId, function, mask; - const u32 subBus = 0; + u32 bus, dev_id, function, mask; + const u32 sub_bus = 0; unsigned int rirq = virt_irq_to_real_map[irq]; /* The IRQ has already been locked by the caller */ bus = REAL_IRQ_TO_BUS(rirq); function = REAL_IRQ_TO_FUNC(rirq); - deviceId = (REAL_IRQ_TO_IDSEL(rirq) << 4) + function; + dev_id = (REAL_IRQ_TO_IDSEL(rirq) << 4) + function; /* Mask secondary INTA */ mask = 0x80000000; - HvCallPci_maskInterrupts(bus, subBus, deviceId, mask); + HvCallPci_maskInterrupts(bus, sub_bus, dev_id, mask); } -/* - * This does nothing because there is not enough information - * provided to do the EOI HvCall. This is done by XmPciLpEvent.c - */ -static void iSeries_end_IRQ(unsigned int irq) +static void iseries_end_IRQ(unsigned int irq) { + unsigned int rirq = virt_irq_to_real_map[irq]; + + HvCallPci_eoi(REAL_IRQ_TO_BUS(rirq), REAL_IRQ_TO_SUBBUS(rirq), + (REAL_IRQ_TO_IDSEL(rirq) << 4) + REAL_IRQ_TO_FUNC(rirq)); } static hw_irq_controller iSeries_IRQ_handler = { .typename = "iSeries irq controller", - .startup = iSeries_startup_IRQ, - .shutdown = iSeries_shutdown_IRQ, - .enable = iSeries_enable_IRQ, - .disable = iSeries_disable_IRQ, - .end = iSeries_end_IRQ + .startup = iseries_startup_IRQ, + .shutdown = iseries_shutdown_IRQ, + .enable = iseries_enable_IRQ, + .disable = iseries_disable_IRQ, + .end = iseries_end_IRQ }; /* * This is called out of iSeries_scan_slot to allocate an IRQ for an EADS slot * It calculates the irq value for the slot. - * Note that subBusNumber is always 0 (at the moment at least). + * Note that sub_bus is always 0 (at the moment at least). */ -int __init iSeries_allocate_IRQ(HvBusNumber busNumber, - HvSubBusNumber subBusNumber, HvAgentId deviceId) +int __init iSeries_allocate_IRQ(HvBusNumber bus, + HvSubBusNumber sub_bus, HvAgentId dev_id) { int virtirq; unsigned int realirq; - u8 idsel = (deviceId >> 4); - u8 function = deviceId & 7; + u8 idsel = (dev_id >> 4); + u8 function = dev_id & 7; - realirq = ((busNumber - 1) << 6) + ((idsel - 1) << 3) + function; + realirq = (((((sub_bus << 8) + (bus - 1)) << 3) + (idsel - 1)) << 3) + + function; virtirq = virt_irq_create_mapping(realirq); irq_desc[virtirq].handler = &iSeries_IRQ_handler; return virtirq; } + +/* + * Get the next pending IRQ. + */ +int iSeries_get_irq(struct pt_regs *regs) +{ + struct paca_struct *lpaca; + /* -2 means ignore this interrupt */ + int irq = -2; + + lpaca = get_paca(); +#ifdef CONFIG_SMP + if (lpaca->lppaca.int_dword.fields.ipi_cnt) { + lpaca->lppaca.int_dword.fields.ipi_cnt = 0; + iSeries_smp_message_recv(regs); + } +#endif /* CONFIG_SMP */ + if (hvlpevent_is_pending()) + process_hvlpevents(regs); + + if (num_pending_irqs) { + spin_lock(&pending_irqs_lock); + for (irq = 0; irq < NR_IRQS; irq++) { + if (pending_irqs[irq]) { + pending_irqs[irq]--; + num_pending_irqs--; + break; + } + } + spin_unlock(&pending_irqs_lock); + if (irq >= NR_IRQS) + irq = -2; + } + + return irq; +} diff --git a/arch/powerpc/platforms/iseries/irq.h b/arch/powerpc/platforms/iseries/irq.h index 5f643f1..b9c801b 100644 --- a/arch/powerpc/platforms/iseries/irq.h +++ b/arch/powerpc/platforms/iseries/irq.h @@ -4,5 +4,6 @@ extern void iSeries_init_IRQ(void); extern int iSeries_allocate_IRQ(HvBusNumber, HvSubBusNumber, HvAgentId); extern void iSeries_activate_IRQs(void); +extern int iSeries_get_irq(struct pt_regs *); #endif /* _ISERIES_IRQ_H */ diff --git a/arch/powerpc/platforms/iseries/lpardata.c b/arch/powerpc/platforms/iseries/lpardata.c index bb8c915..ea72385 100644 --- a/arch/powerpc/platforms/iseries/lpardata.c +++ b/arch/powerpc/platforms/iseries/lpardata.c @@ -225,3 +225,10 @@ struct ItVpdAreas itVpdAreas = { 0,0 } }; + +struct ItLpRegSave iseries_reg_save[] = { + [0 ... (NR_CPUS-1)] = { + .xDesc = 0xd397d9e2, /* "LpRS" */ + .xSize = sizeof(struct ItLpRegSave), + }, +}; diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index da26639..ad5ef805 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -571,16 +571,6 @@ static void iSeries_show_cpuinfo(struct seq_file *m) /* * Document me. - * and Implement me. - */ -static int iSeries_get_irq(struct pt_regs *regs) -{ - /* -2 means ignore this interrupt */ - return -2; -} - -/* - * Document me. */ static void iSeries_restart(char *cmd) { diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c index 7ece898..dd73e38 100644 --- a/arch/powerpc/platforms/maple/setup.c +++ b/arch/powerpc/platforms/maple/setup.c @@ -51,6 +51,7 @@ #include <asm/pgtable.h> #include <asm/bitops.h> #include <asm/io.h> +#include <asm/kexec.h> #include <asm/pci-bridge.h> #include <asm/iommu.h> #include <asm/machdep.h> @@ -191,24 +192,10 @@ static void __init maple_init_early(void) */ hpte_init_native(); - /* Find the serial port */ - generic_find_legacy_serial_ports(&physport, &default_speed); - - DBG("phys port addr: %lx\n", (long)physport); - - if (physport) { - void *comport; - /* Map the uart for udbg. */ - comport = (void *)ioremap(physport, 16); - udbg_init_uart(comport, default_speed); - - DBG("Hello World !\n"); - } - /* Setup interrupt mapping options */ ppc64_interrupt_controller = IC_OPEN_PIC; - iommu_init_early_u3(); + iommu_init_early_dart(); DBG(" <- maple_init_early\n"); } @@ -270,7 +257,7 @@ static int __init maple_probe(int platform) * occupies having to be broken up so the DART itself is not * part of the cacheable linar mapping */ - alloc_u3_dart_table(); + alloc_dart_table(); return 1; } @@ -292,4 +279,9 @@ struct machdep_calls __initdata maple_md = { .calibrate_decr = generic_calibrate_decr, .progress = maple_progress, .idle_loop = native_idle, +#ifdef CONFIG_KEXEC + .machine_kexec = default_machine_kexec, + .machine_kexec_prepare = default_machine_kexec_prepare, + .machine_crash_shutdown = default_machine_crash_shutdown, +#endif }; diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile index c9df44f..78093d7 100644 --- a/arch/powerpc/platforms/powermac/Makefile +++ b/arch/powerpc/platforms/powermac/Makefile @@ -1,9 +1,14 @@ +CFLAGS_bootx_init.o += -fPIC + obj-y += pic.o setup.o time.o feature.o pci.o \ - sleep.o low_i2c.o cache.o + sleep.o low_i2c.o cache.o pfunc_core.o \ + pfunc_base.o obj-$(CONFIG_PMAC_BACKLIGHT) += backlight.o obj-$(CONFIG_CPU_FREQ_PMAC) += cpufreq_32.o obj-$(CONFIG_CPU_FREQ_PMAC64) += cpufreq_64.o obj-$(CONFIG_NVRAM) += nvram.o # ppc64 pmac doesn't define CONFIG_NVRAM but needs nvram stuff obj-$(CONFIG_PPC64) += nvram.o +obj-$(CONFIG_PPC32) += bootx_init.o obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_PPC_MERGE) += udbg_scc.o udbg_adb.o diff --git a/arch/powerpc/platforms/powermac/bootx_init.c b/arch/powerpc/platforms/powermac/bootx_init.c new file mode 100644 index 0000000..fa8b4d7 --- /dev/null +++ b/arch/powerpc/platforms/powermac/bootx_init.c @@ -0,0 +1,547 @@ +/* + * Early boot support code for BootX bootloader + * + * Copyright (C) 2005 Ben. Herrenschmidt (benh@kernel.crashing.org) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/version.h> +#include <asm/sections.h> +#include <asm/prom.h> +#include <asm/page.h> +#include <asm/bootx.h> +#include <asm/bootinfo.h> +#include <asm/btext.h> +#include <asm/io.h> + +#undef DEBUG +#define SET_BOOT_BAT + +#ifdef DEBUG +#define DBG(fmt...) do { bootx_printf(fmt); } while(0) +#else +#define DBG(fmt...) do { } while(0) +#endif + +extern void __start(unsigned long r3, unsigned long r4, unsigned long r5); + +static unsigned long __initdata bootx_dt_strbase; +static unsigned long __initdata bootx_dt_strend; +static unsigned long __initdata bootx_node_chosen; +static boot_infos_t * __initdata bootx_info; +static char __initdata bootx_disp_path[256]; + +/* Is boot-info compatible ? */ +#define BOOT_INFO_IS_COMPATIBLE(bi) \ + ((bi)->compatible_version <= BOOT_INFO_VERSION) +#define BOOT_INFO_IS_V2_COMPATIBLE(bi) ((bi)->version >= 2) +#define BOOT_INFO_IS_V4_COMPATIBLE(bi) ((bi)->version >= 4) + +#ifdef CONFIG_BOOTX_TEXT +static void __init bootx_printf(const char *format, ...) +{ + const char *p, *q, *s; + va_list args; + unsigned long v; + + va_start(args, format); + for (p = format; *p != 0; p = q) { + for (q = p; *q != 0 && *q != '\n' && *q != '%'; ++q) + ; + if (q > p) + btext_drawtext(p, q - p); + if (*q == 0) + break; + if (*q == '\n') { + ++q; + btext_flushline(); + btext_drawstring("\r\n"); + btext_flushline(); + continue; + } + ++q; + if (*q == 0) + break; + switch (*q) { + case 's': + ++q; + s = va_arg(args, const char *); + if (s == NULL) + s = "<NULL>"; + btext_drawstring(s); + break; + case 'x': + ++q; + v = va_arg(args, unsigned long); + btext_drawhex(v); + break; + } + } +} +#else /* CONFIG_BOOTX_TEXT */ +static void __init bootx_printf(const char *format, ...) {} +#endif /* CONFIG_BOOTX_TEXT */ + +static void * __init bootx_early_getprop(unsigned long base, + unsigned long node, + char *prop) +{ + struct bootx_dt_node *np = (struct bootx_dt_node *)(base + node); + u32 *ppp = &np->properties; + + while(*ppp) { + struct bootx_dt_prop *pp = + (struct bootx_dt_prop *)(base + *ppp); + + if (strcmp((char *)((unsigned long)pp->name + base), + prop) == 0) { + return (void *)((unsigned long)pp->value + base); + } + ppp = &pp->next; + } + return NULL; +} + +#define dt_push_token(token, mem) \ + do { \ + *(mem) = _ALIGN_UP(*(mem),4); \ + *((u32 *)*(mem)) = token; \ + *(mem) += 4; \ + } while(0) + +static unsigned long __init bootx_dt_find_string(char *str) +{ + char *s, *os; + + s = os = (char *)bootx_dt_strbase; + s += 4; + while (s < (char *)bootx_dt_strend) { + if (strcmp(s, str) == 0) + return s - os; + s += strlen(s) + 1; + } + return 0; +} + +static void __init bootx_dt_add_prop(char *name, void *data, int size, + unsigned long *mem_end) +{ + unsigned long soff = bootx_dt_find_string(name); + if (data == NULL) + size = 0; + if (soff == 0) { + bootx_printf("WARNING: Can't find string index for <%s>\n", + name); + return; + } + if (size > 0x20000) { + bootx_printf("WARNING: ignoring large property "); + bootx_printf("%s length 0x%x\n", name, size); + return; + } + dt_push_token(OF_DT_PROP, mem_end); + dt_push_token(size, mem_end); + dt_push_token(soff, mem_end); + + /* push property content */ + if (size && data) { + memcpy((void *)*mem_end, data, size); + *mem_end = _ALIGN_UP(*mem_end + size, 4); + } +} + +static void __init bootx_add_chosen_props(unsigned long base, + unsigned long *mem_end) +{ + u32 val = _MACH_Pmac; + + bootx_dt_add_prop("linux,platform", &val, 4, mem_end); + + if (bootx_info->kernelParamsOffset) { + char *args = (char *)((unsigned long)bootx_info) + + bootx_info->kernelParamsOffset; + bootx_dt_add_prop("bootargs", args, strlen(args) + 1, mem_end); + } + if (bootx_info->ramDisk) { + val = ((unsigned long)bootx_info) + bootx_info->ramDisk; + bootx_dt_add_prop("linux,initrd-start", &val, 4, mem_end); + val += bootx_info->ramDiskSize; + bootx_dt_add_prop("linux,initrd-end", &val, 4, mem_end); + } + if (strlen(bootx_disp_path)) + bootx_dt_add_prop("linux,stdout-path", bootx_disp_path, + strlen(bootx_disp_path) + 1, mem_end); +} + +static void __init bootx_add_display_props(unsigned long base, + unsigned long *mem_end) +{ + bootx_dt_add_prop("linux,boot-display", NULL, 0, mem_end); + bootx_dt_add_prop("linux,opened", NULL, 0, mem_end); +} + +static void __init bootx_dt_add_string(char *s, unsigned long *mem_end) +{ + unsigned int l = strlen(s) + 1; + memcpy((void *)*mem_end, s, l); + bootx_dt_strend = *mem_end = *mem_end + l; +} + +static void __init bootx_scan_dt_build_strings(unsigned long base, + unsigned long node, + unsigned long *mem_end) +{ + struct bootx_dt_node *np = (struct bootx_dt_node *)(base + node); + u32 *cpp, *ppp = &np->properties; + unsigned long soff; + char *namep; + + /* Keep refs to known nodes */ + namep = np->full_name ? (char *)(base + np->full_name) : NULL; + if (namep == NULL) { + bootx_printf("Node without a full name !\n"); + namep = ""; + } + DBG("* strings: %s\n", namep); + + if (!strcmp(namep, "/chosen")) { + DBG(" detected /chosen ! adding properties names !\n"); + bootx_dt_add_string("linux,platform", mem_end); + bootx_dt_add_string("linux,stdout-path", mem_end); + bootx_dt_add_string("linux,initrd-start", mem_end); + bootx_dt_add_string("linux,initrd-end", mem_end); + bootx_dt_add_string("bootargs", mem_end); + bootx_node_chosen = node; + } + if (node == bootx_info->dispDeviceRegEntryOffset) { + DBG(" detected display ! adding properties names !\n"); + bootx_dt_add_string("linux,boot-display", mem_end); + bootx_dt_add_string("linux,opened", mem_end); + strncpy(bootx_disp_path, namep, 255); + } + + /* get and store all property names */ + while (*ppp) { + struct bootx_dt_prop *pp = + (struct bootx_dt_prop *)(base + *ppp); + + namep = pp->name ? (char *)(base + pp->name) : NULL; + if (namep == NULL || strcmp(namep, "name") == 0) + goto next; + /* get/create string entry */ + soff = bootx_dt_find_string(namep); + if (soff == 0) + bootx_dt_add_string(namep, mem_end); + next: + ppp = &pp->next; + } + + /* do all our children */ + cpp = &np->child; + while(*cpp) { + np = (struct bootx_dt_node *)(base + *cpp); + bootx_scan_dt_build_strings(base, *cpp, mem_end); + cpp = &np->sibling; + } +} + +static void __init bootx_scan_dt_build_struct(unsigned long base, + unsigned long node, + unsigned long *mem_end) +{ + struct bootx_dt_node *np = (struct bootx_dt_node *)(base + node); + u32 *cpp, *ppp = &np->properties; + char *namep, *p, *ep, *lp; + int l; + + dt_push_token(OF_DT_BEGIN_NODE, mem_end); + + /* get the node's full name */ + namep = np->full_name ? (char *)(base + np->full_name) : NULL; + if (namep == NULL) + namep = ""; + l = strlen(namep); + + DBG("* struct: %s\n", namep); + + /* Fixup an Apple bug where they have bogus \0 chars in the + * middle of the path in some properties, and extract + * the unit name (everything after the last '/'). + */ + memcpy((void *)*mem_end, namep, l + 1); + namep = (char *)*mem_end; + for (lp = p = namep, ep = namep + l; p < ep; p++) { + if (*p == '/') + lp = namep; + else if (*p != 0) + *lp++ = *p; + } + *lp = 0; + *mem_end = _ALIGN_UP((unsigned long)lp + 1, 4); + + /* get and store all properties */ + while (*ppp) { + struct bootx_dt_prop *pp = + (struct bootx_dt_prop *)(base + *ppp); + + namep = pp->name ? (char *)(base + pp->name) : NULL; + /* Skip "name" */ + if (namep == NULL || !strcmp(namep, "name")) + goto next; + /* Skip "bootargs" in /chosen too as we replace it */ + if (node == bootx_node_chosen && !strcmp(namep, "bootargs")) + goto next; + + /* push property head */ + bootx_dt_add_prop(namep, + pp->value ? (void *)(base + pp->value): NULL, + pp->length, mem_end); + next: + ppp = &pp->next; + } + + if (node == bootx_node_chosen) + bootx_add_chosen_props(base, mem_end); + if (node == bootx_info->dispDeviceRegEntryOffset) + bootx_add_display_props(base, mem_end); + + /* do all our children */ + cpp = &np->child; + while(*cpp) { + np = (struct bootx_dt_node *)(base + *cpp); + bootx_scan_dt_build_struct(base, *cpp, mem_end); + cpp = &np->sibling; + } + + dt_push_token(OF_DT_END_NODE, mem_end); +} + +static unsigned long __init bootx_flatten_dt(unsigned long start) +{ + boot_infos_t *bi = bootx_info; + unsigned long mem_start, mem_end; + struct boot_param_header *hdr; + unsigned long base; + u64 *rsvmap; + + /* Start using memory after the big blob passed by BootX, get + * some space for the header + */ + mem_start = mem_end = _ALIGN_UP(((unsigned long)bi) + start, 4); + DBG("Boot params header at: %x\n", mem_start); + hdr = (struct boot_param_header *)mem_start; + mem_end += sizeof(struct boot_param_header); + rsvmap = (u64 *)(_ALIGN_UP(mem_end, 8)); + hdr->off_mem_rsvmap = ((unsigned long)rsvmap) - mem_start; + mem_end = ((unsigned long)rsvmap) + 8 * sizeof(u64); + + /* Get base of tree */ + base = ((unsigned long)bi) + bi->deviceTreeOffset; + + /* Build string array */ + DBG("Building string array at: %x\n", mem_end); + DBG("Device Tree Base=%x\n", base); + bootx_dt_strbase = mem_end; + mem_end += 4; + bootx_dt_strend = mem_end; + bootx_scan_dt_build_strings(base, 4, &mem_end); + hdr->off_dt_strings = bootx_dt_strbase - mem_start; + hdr->dt_strings_size = bootx_dt_strend - bootx_dt_strbase; + + /* Build structure */ + mem_end = _ALIGN(mem_end, 16); + DBG("Building device tree structure at: %x\n", mem_end); + hdr->off_dt_struct = mem_end - mem_start; + bootx_scan_dt_build_struct(base, 4, &mem_end); + dt_push_token(OF_DT_END, &mem_end); + + /* Finish header */ + hdr->boot_cpuid_phys = 0; + hdr->magic = OF_DT_HEADER; + hdr->totalsize = mem_end - mem_start; + hdr->version = OF_DT_VERSION; + /* Version 16 is not backward compatible */ + hdr->last_comp_version = 0x10; + + /* Reserve the whole thing and copy the reserve map in, we + * also bump mem_reserve_cnt to cause further reservations to + * fail since it's too late. + */ + mem_end = _ALIGN(mem_end, PAGE_SIZE); + DBG("End of boot params: %x\n", mem_end); + rsvmap[0] = mem_start; + rsvmap[1] = mem_end; + rsvmap[2] = 0; + rsvmap[3] = 0; + + return (unsigned long)hdr; +} + + +#ifdef CONFIG_BOOTX_TEXT +static void __init btext_welcome(boot_infos_t *bi) +{ + unsigned long flags; + unsigned long pvr; + + bootx_printf("Welcome to Linux, kernel " UTS_RELEASE "\n"); + bootx_printf("\nlinked at : 0x%x", KERNELBASE); + bootx_printf("\nframe buffer at : 0x%x", bi->dispDeviceBase); + bootx_printf(" (phys), 0x%x", bi->logicalDisplayBase); + bootx_printf(" (log)"); + bootx_printf("\nklimit : 0x%x",(unsigned long)klimit); + bootx_printf("\nboot_info at : 0x%x", bi); + __asm__ __volatile__ ("mfmsr %0" : "=r" (flags)); + bootx_printf("\nMSR : 0x%x", flags); + __asm__ __volatile__ ("mfspr %0, 287" : "=r" (pvr)); + bootx_printf("\nPVR : 0x%x", pvr); + pvr >>= 16; + if (pvr > 1) { + __asm__ __volatile__ ("mfspr %0, 1008" : "=r" (flags)); + bootx_printf("\nHID0 : 0x%x", flags); + } + if (pvr == 8 || pvr == 12 || pvr == 0x800c) { + __asm__ __volatile__ ("mfspr %0, 1019" : "=r" (flags)); + bootx_printf("\nICTC : 0x%x", flags); + } +#ifdef DEBUG + bootx_printf("\n\n"); + bootx_printf("bi->deviceTreeOffset : 0x%x\n", + bi->deviceTreeOffset); + bootx_printf("bi->deviceTreeSize : 0x%x\n", + bi->deviceTreeSize); +#endif + bootx_printf("\n\n"); +} +#endif /* CONFIG_BOOTX_TEXT */ + +void __init bootx_init(unsigned long r3, unsigned long r4) +{ + boot_infos_t *bi = (boot_infos_t *) r4; + unsigned long hdr; + unsigned long space; + unsigned long ptr, x; + char *model; + unsigned long offset = reloc_offset(); + + reloc_got2(offset); + + bootx_info = bi; + + /* We haven't cleared any bss at this point, make sure + * what we need is initialized + */ + bootx_dt_strbase = bootx_dt_strend = 0; + bootx_node_chosen = 0; + bootx_disp_path[0] = 0; + + if (!BOOT_INFO_IS_V2_COMPATIBLE(bi)) + bi->logicalDisplayBase = bi->dispDeviceBase; + +#ifdef CONFIG_BOOTX_TEXT + btext_setup_display(bi->dispDeviceRect[2] - bi->dispDeviceRect[0], + bi->dispDeviceRect[3] - bi->dispDeviceRect[1], + bi->dispDeviceDepth, bi->dispDeviceRowBytes, + (unsigned long)bi->logicalDisplayBase); + btext_clearscreen(); + btext_flushscreen(); +#endif /* CONFIG_BOOTX_TEXT */ + + /* + * Test if boot-info is compatible. Done only in config + * CONFIG_BOOTX_TEXT since there is nothing much we can do + * with an incompatible version, except display a message + * and eventually hang the processor... + * + * I'll try to keep enough of boot-info compatible in the + * future to always allow display of this message; + */ + if (!BOOT_INFO_IS_COMPATIBLE(bi)) { + bootx_printf(" !!! WARNING - Incompatible version" + " of BootX !!!\n\n\n"); + for (;;) + ; + } + if (bi->architecture != BOOT_ARCH_PCI) { + bootx_printf(" !!! WARNING - Usupported machine" + " architecture !\n"); + for (;;) + ; + } + +#ifdef CONFIG_BOOTX_TEXT + btext_welcome(bi); +#endif + /* New BootX enters kernel with MMU off, i/os are not allowed + * here. This hack will have been done by the boostrap anyway. + */ + if (bi->version < 4) { + /* + * XXX If this is an iMac, turn off the USB controller. + */ + model = (char *) bootx_early_getprop(r4 + bi->deviceTreeOffset, + 4, "model"); + if (model + && (strcmp(model, "iMac,1") == 0 + || strcmp(model, "PowerMac1,1") == 0)) { + bootx_printf("iMac,1 detected, shutting down USB \n"); + out_le32((unsigned *)0x80880008, 1); /* XXX */ + } + } + + /* Get a pointer that points above the device tree, args, ramdisk, + * etc... to use for generating the flattened tree + */ + if (bi->version < 5) { + space = bi->deviceTreeOffset + bi->deviceTreeSize; + if (bi->ramDisk) + space = bi->ramDisk + bi->ramDiskSize; + } else + space = bi->totalParamsSize; + + bootx_printf("Total space used by parameters & ramdisk: %x \n", space); + + /* New BootX will have flushed all TLBs and enters kernel with + * MMU switched OFF, so this should not be useful anymore. + */ + if (bi->version < 4) { + bootx_printf("Touching pages...\n"); + + /* + * Touch each page to make sure the PTEs for them + * are in the hash table - the aim is to try to avoid + * getting DSI exceptions while copying the kernel image. + */ + for (ptr = ((unsigned long) &_stext) & PAGE_MASK; + ptr < (unsigned long)bi + space; ptr += PAGE_SIZE) + x = *(volatile unsigned long *)ptr; + } + + /* Ok, now we need to generate a flattened device-tree to pass + * to the kernel + */ + bootx_printf("Preparing boot params...\n"); + + hdr = bootx_flatten_dt(space); + +#ifdef CONFIG_BOOTX_TEXT +#ifdef SET_BOOT_BAT + bootx_printf("Preparing BAT...\n"); + btext_prepare_BAT(); +#else + btext_unmap(); +#endif +#endif + + reloc_got2(-offset); + + __start(hdr, KERNELBASE + offset, 0); +} diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c index 3915034..a4b50c4 100644 --- a/arch/powerpc/platforms/powermac/cpufreq_64.c +++ b/arch/powerpc/platforms/powermac/cpufreq_64.c @@ -28,6 +28,7 @@ #include <asm/cputable.h> #include <asm/time.h> #include <asm/smu.h> +#include <asm/pmac_pfunc.h> #undef DEBUG @@ -85,6 +86,10 @@ static u32 *g5_pmode_data; static int g5_pmode_max; static int g5_pmode_cur; +static void (*g5_switch_volt)(int speed_mode); +static int (*g5_switch_freq)(int speed_mode); +static int (*g5_query_freq)(void); + static DECLARE_MUTEX(g5_switch_mutex); @@ -92,9 +97,11 @@ static struct smu_sdbp_fvt *g5_fvt_table; /* table of op. points */ static int g5_fvt_count; /* number of op. points */ static int g5_fvt_cur; /* current op. point */ -/* ----------------- real hardware interface */ +/* + * SMU based voltage switching for Neo2 platforms + */ -static void g5_switch_volt(int speed_mode) +static void g5_smu_switch_volt(int speed_mode) { struct smu_simple_cmd cmd; @@ -105,26 +112,57 @@ static void g5_switch_volt(int speed_mode) wait_for_completion(&comp); } -static int g5_switch_freq(int speed_mode) +/* + * Platform function based voltage/vdnap switching for Neo2 + */ + +static struct pmf_function *pfunc_set_vdnap0; +static struct pmf_function *pfunc_vdnap0_complete; + +static void g5_vdnap_switch_volt(int speed_mode) { - struct cpufreq_freqs freqs; - int to; + struct pmf_args args; + u32 slew, done = 0; + unsigned long timeout; - if (g5_pmode_cur == speed_mode) - return 0; + slew = (speed_mode == CPUFREQ_LOW) ? 1 : 0; + args.count = 1; + args.u[0].p = &slew; - down(&g5_switch_mutex); + pmf_call_one(pfunc_set_vdnap0, &args); - freqs.old = g5_cpu_freqs[g5_pmode_cur].frequency; - freqs.new = g5_cpu_freqs[speed_mode].frequency; - freqs.cpu = 0; + /* It's an irq GPIO so we should be able to just block here, + * I'll do that later after I've properly tested the IRQ code for + * platform functions + */ + timeout = jiffies + HZ/10; + while(!time_after(jiffies, timeout)) { + args.count = 1; + args.u[0].p = &done; + pmf_call_one(pfunc_vdnap0_complete, &args); + if (done) + break; + msleep(1); + } + if (done == 0) + printk(KERN_WARNING "cpufreq: Timeout in clock slewing !\n"); +} - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + +/* + * SCOM based frequency switching for 970FX rev3 + */ +static int g5_scom_switch_freq(int speed_mode) +{ + unsigned long flags; + int to; /* If frequency is going up, first ramp up the voltage */ if (speed_mode < g5_pmode_cur) g5_switch_volt(speed_mode); + local_irq_save(flags); + /* Clear PCR high */ scom970_write(SCOM_PCR, 0); /* Clear PCR low */ @@ -147,6 +185,8 @@ static int g5_switch_freq(int speed_mode) udelay(100); } + local_irq_restore(flags); + /* If frequency is going down, last ramp the voltage */ if (speed_mode > g5_pmode_cur) g5_switch_volt(speed_mode); @@ -154,14 +194,10 @@ static int g5_switch_freq(int speed_mode) g5_pmode_cur = speed_mode; ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul; - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - up(&g5_switch_mutex); - return 0; } -static int g5_query_freq(void) +static int g5_scom_query_freq(void) { unsigned long psr = scom970_read(SCOM_PSR); int i; @@ -173,7 +209,104 @@ static int g5_query_freq(void) return i; } -/* ----------------- cpufreq bookkeeping */ +/* + * Platform function based voltage switching for PowerMac7,2 & 7,3 + */ + +static struct pmf_function *pfunc_cpu0_volt_high; +static struct pmf_function *pfunc_cpu0_volt_low; +static struct pmf_function *pfunc_cpu1_volt_high; +static struct pmf_function *pfunc_cpu1_volt_low; + +static void g5_pfunc_switch_volt(int speed_mode) +{ + if (speed_mode == CPUFREQ_HIGH) { + if (pfunc_cpu0_volt_high) + pmf_call_one(pfunc_cpu0_volt_high, NULL); + if (pfunc_cpu1_volt_high) + pmf_call_one(pfunc_cpu1_volt_high, NULL); + } else { + if (pfunc_cpu0_volt_low) + pmf_call_one(pfunc_cpu0_volt_low, NULL); + if (pfunc_cpu1_volt_low) + pmf_call_one(pfunc_cpu1_volt_low, NULL); + } + msleep(10); /* should be faster , to fix */ +} + +/* + * Platform function based frequency switching for PowerMac7,2 & 7,3 + */ + +static struct pmf_function *pfunc_cpu_setfreq_high; +static struct pmf_function *pfunc_cpu_setfreq_low; +static struct pmf_function *pfunc_cpu_getfreq; +static struct pmf_function *pfunc_slewing_done;; + +static int g5_pfunc_switch_freq(int speed_mode) +{ + struct pmf_args args; + u32 done = 0; + unsigned long timeout; + + /* If frequency is going up, first ramp up the voltage */ + if (speed_mode < g5_pmode_cur) + g5_switch_volt(speed_mode); + + /* Do it */ + if (speed_mode == CPUFREQ_HIGH) + pmf_call_one(pfunc_cpu_setfreq_high, NULL); + else + pmf_call_one(pfunc_cpu_setfreq_low, NULL); + + /* It's an irq GPIO so we should be able to just block here, + * I'll do that later after I've properly tested the IRQ code for + * platform functions + */ + timeout = jiffies + HZ/10; + while(!time_after(jiffies, timeout)) { + args.count = 1; + args.u[0].p = &done; + pmf_call_one(pfunc_slewing_done, &args); + if (done) + break; + msleep(1); + } + if (done == 0) + printk(KERN_WARNING "cpufreq: Timeout in clock slewing !\n"); + + /* If frequency is going down, last ramp the voltage */ + if (speed_mode > g5_pmode_cur) + g5_switch_volt(speed_mode); + + g5_pmode_cur = speed_mode; + ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul; + + return 0; +} + +static int g5_pfunc_query_freq(void) +{ + struct pmf_args args; + u32 val = 0; + + args.count = 1; + args.u[0].p = &val; + pmf_call_one(pfunc_cpu_getfreq, &args); + return val ? CPUFREQ_HIGH : CPUFREQ_LOW; +} + +/* + * Fake voltage switching for platforms with missing support + */ + +static void g5_dummy_switch_volt(int speed_mode) +{ +} + +/* + * Common interface to the cpufreq core + */ static int g5_cpufreq_verify(struct cpufreq_policy *policy) { @@ -183,13 +316,30 @@ static int g5_cpufreq_verify(struct cpufreq_policy *policy) static int g5_cpufreq_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) { - unsigned int newstate = 0; + unsigned int newstate = 0; + struct cpufreq_freqs freqs; + int rc; if (cpufreq_frequency_table_target(policy, g5_cpu_freqs, target_freq, relation, &newstate)) return -EINVAL; - return g5_switch_freq(newstate); + if (g5_pmode_cur == newstate) + return 0; + + down(&g5_switch_mutex); + + freqs.old = g5_cpu_freqs[g5_pmode_cur].frequency; + freqs.new = g5_cpu_freqs[newstate].frequency; + freqs.cpu = 0; + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + rc = g5_switch_freq(newstate); + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + up(&g5_switch_mutex); + + return rc; } static unsigned int g5_cpufreq_get_speed(unsigned int cpu) @@ -205,6 +355,7 @@ static int g5_cpufreq_cpu_init(struct cpufreq_policy *policy) policy->governor = CPUFREQ_DEFAULT_GOVERNOR; policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; policy->cur = g5_cpu_freqs[g5_query_freq()].frequency; + policy->cpus = cpu_possible_map; cpufreq_frequency_table_get_attr(g5_cpu_freqs, policy->cpu); return cpufreq_frequency_table_cpuinfo(policy, @@ -224,19 +375,39 @@ static struct cpufreq_driver g5_cpufreq_driver = { }; -static int __init g5_cpufreq_init(void) +static int __init g5_neo2_cpufreq_init(struct device_node *cpus) { struct device_node *cpunode; unsigned int psize, ssize; - struct smu_sdbp_header *shdr; unsigned long max_freq; - u32 *valp; + char *freq_method, *volt_method; + u32 *valp, pvr_hi; + int use_volts_vdnap = 0; + int use_volts_smu = 0; int rc = -ENODEV; - /* Look for CPU and SMU nodes */ - cpunode = of_find_node_by_type(NULL, "cpu"); - if (!cpunode) { - DBG("No CPU node !\n"); + /* Check supported platforms */ + if (machine_is_compatible("PowerMac8,1") || + machine_is_compatible("PowerMac8,2") || + machine_is_compatible("PowerMac9,1")) + use_volts_smu = 1; + else if (machine_is_compatible("PowerMac11,2")) + use_volts_vdnap = 1; + else + return -ENODEV; + + /* Get first CPU node */ + for (cpunode = NULL; + (cpunode = of_get_next_child(cpus, cpunode)) != NULL;) { + u32 *reg = + (u32 *)get_property(cpunode, "reg", NULL); + if (reg == NULL || (*reg) != 0) + continue; + if (!strcmp(cpunode->type, "cpu")) + break; + } + if (cpunode == NULL) { + printk(KERN_ERR "cpufreq: Can't find any CPU 0 node\n"); return -ENODEV; } @@ -246,8 +417,9 @@ static int __init g5_cpufreq_init(void) DBG("No cpu-version property !\n"); goto bail_noprops; } - if (((*valp) >> 16) != 0x3c) { - DBG("Wrong CPU version: %08x\n", *valp); + pvr_hi = (*valp) >> 16; + if (pvr_hi != 0x3c && pvr_hi != 0x44) { + printk(KERN_ERR "cpufreq: Unsupported CPU version\n"); goto bail_noprops; } @@ -259,18 +431,50 @@ static int __init g5_cpufreq_init(void) } g5_pmode_max = psize / sizeof(u32) - 1; - /* Look for the FVT table */ - shdr = smu_get_sdb_partition(SMU_SDB_FVT_ID, NULL); - if (!shdr) - goto bail_noprops; - g5_fvt_table = (struct smu_sdbp_fvt *)&shdr[1]; - ssize = (shdr->len * sizeof(u32)) - sizeof(struct smu_sdbp_header); - g5_fvt_count = ssize / sizeof(struct smu_sdbp_fvt); - g5_fvt_cur = 0; - - /* Sanity checking */ - if (g5_fvt_count < 1 || g5_pmode_max < 1) - goto bail_noprops; + if (use_volts_smu) { + struct smu_sdbp_header *shdr; + + /* Look for the FVT table */ + shdr = smu_get_sdb_partition(SMU_SDB_FVT_ID, NULL); + if (!shdr) + goto bail_noprops; + g5_fvt_table = (struct smu_sdbp_fvt *)&shdr[1]; + ssize = (shdr->len * sizeof(u32)) - + sizeof(struct smu_sdbp_header); + g5_fvt_count = ssize / sizeof(struct smu_sdbp_fvt); + g5_fvt_cur = 0; + + /* Sanity checking */ + if (g5_fvt_count < 1 || g5_pmode_max < 1) + goto bail_noprops; + + g5_switch_volt = g5_smu_switch_volt; + volt_method = "SMU"; + } else if (use_volts_vdnap) { + struct device_node *root; + + root = of_find_node_by_path("/"); + if (root == NULL) { + printk(KERN_ERR "cpufreq: Can't find root of " + "device tree\n"); + goto bail_noprops; + } + pfunc_set_vdnap0 = pmf_find_function(root, "set-vdnap0"); + pfunc_vdnap0_complete = + pmf_find_function(root, "slewing-done"); + if (pfunc_set_vdnap0 == NULL || + pfunc_vdnap0_complete == NULL) { + printk(KERN_ERR "cpufreq: Can't find required " + "platform function\n"); + goto bail_noprops; + } + + g5_switch_volt = g5_vdnap_switch_volt; + volt_method = "GPIO"; + } else { + g5_switch_volt = g5_dummy_switch_volt; + volt_method = "none"; + } /* * From what I see, clock-frequency is always the maximal frequency. @@ -286,19 +490,23 @@ static int __init g5_cpufreq_init(void) g5_cpu_freqs[0].frequency = max_freq; g5_cpu_freqs[1].frequency = max_freq/2; - /* Check current frequency */ - g5_pmode_cur = g5_query_freq(); - if (g5_pmode_cur > 1) - /* We don't support anything but 1:1 and 1:2, fixup ... */ - g5_pmode_cur = 1; + /* Set callbacks */ + g5_switch_freq = g5_scom_switch_freq; + g5_query_freq = g5_scom_query_freq; + freq_method = "SCOM"; /* Force apply current frequency to make sure everything is in * sync (voltage is right for example). Firmware may leave us with * a strange setting ... */ - g5_switch_freq(g5_pmode_cur); + g5_switch_volt(CPUFREQ_HIGH); + msleep(10); + g5_pmode_cur = -1; + g5_switch_freq(g5_query_freq()); printk(KERN_INFO "Registering G5 CPU frequency driver\n"); + printk(KERN_INFO "Frequency method: %s, Voltage method: %s\n", + freq_method, volt_method); printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n", g5_cpu_freqs[1].frequency/1000, g5_cpu_freqs[0].frequency/1000, @@ -317,6 +525,200 @@ static int __init g5_cpufreq_init(void) return rc; } +static int __init g5_pm72_cpufreq_init(struct device_node *cpus) +{ + struct device_node *cpuid = NULL, *hwclock = NULL, *cpunode = NULL; + u8 *eeprom = NULL; + u32 *valp; + u64 max_freq, min_freq, ih, il; + int has_volt = 1, rc = 0; + + /* Get first CPU node */ + for (cpunode = NULL; + (cpunode = of_get_next_child(cpus, cpunode)) != NULL;) { + if (!strcmp(cpunode->type, "cpu")) + break; + } + if (cpunode == NULL) { + printk(KERN_ERR "cpufreq: Can't find any CPU node\n"); + return -ENODEV; + } + + /* Lookup the cpuid eeprom node */ + cpuid = of_find_node_by_path("/u3@0,f8000000/i2c@f8001000/cpuid@a0"); + if (cpuid != NULL) + eeprom = (u8 *)get_property(cpuid, "cpuid", NULL); + if (eeprom == NULL) { + printk(KERN_ERR "cpufreq: Can't find cpuid EEPROM !\n"); + rc = -ENODEV; + goto bail; + } + + /* Lookup the i2c hwclock */ + for (hwclock = NULL; + (hwclock = of_find_node_by_name(hwclock, "i2c-hwclock")) != NULL;){ + char *loc = get_property(hwclock, "hwctrl-location", NULL); + if (loc == NULL) + continue; + if (strcmp(loc, "CPU CLOCK")) + continue; + if (!get_property(hwclock, "platform-get-frequency", NULL)) + continue; + break; + } + if (hwclock == NULL) { + printk(KERN_ERR "cpufreq: Can't find i2c clock chip !\n"); + rc = -ENODEV; + goto bail; + } + + DBG("cpufreq: i2c clock chip found: %s\n", hwclock->full_name); + + /* Now get all the platform functions */ + pfunc_cpu_getfreq = + pmf_find_function(hwclock, "get-frequency"); + pfunc_cpu_setfreq_high = + pmf_find_function(hwclock, "set-frequency-high"); + pfunc_cpu_setfreq_low = + pmf_find_function(hwclock, "set-frequency-low"); + pfunc_slewing_done = + pmf_find_function(hwclock, "slewing-done"); + pfunc_cpu0_volt_high = + pmf_find_function(hwclock, "set-voltage-high-0"); + pfunc_cpu0_volt_low = + pmf_find_function(hwclock, "set-voltage-low-0"); + pfunc_cpu1_volt_high = + pmf_find_function(hwclock, "set-voltage-high-1"); + pfunc_cpu1_volt_low = + pmf_find_function(hwclock, "set-voltage-low-1"); + + /* Check we have minimum requirements */ + if (pfunc_cpu_getfreq == NULL || pfunc_cpu_setfreq_high == NULL || + pfunc_cpu_setfreq_low == NULL || pfunc_slewing_done == NULL) { + printk(KERN_ERR "cpufreq: Can't find platform functions !\n"); + rc = -ENODEV; + goto bail; + } + + /* Check that we have complete sets */ + if (pfunc_cpu0_volt_high == NULL || pfunc_cpu0_volt_low == NULL) { + pmf_put_function(pfunc_cpu0_volt_high); + pmf_put_function(pfunc_cpu0_volt_low); + pfunc_cpu0_volt_high = pfunc_cpu0_volt_low = NULL; + has_volt = 0; + } + if (!has_volt || + pfunc_cpu1_volt_high == NULL || pfunc_cpu1_volt_low == NULL) { + pmf_put_function(pfunc_cpu1_volt_high); + pmf_put_function(pfunc_cpu1_volt_low); + pfunc_cpu1_volt_high = pfunc_cpu1_volt_low = NULL; + } + + /* Note: The device tree also contains a "platform-set-values" + * function for which I haven't quite figured out the usage. It + * might have to be called on init and/or wakeup, I'm not too sure + * but things seem to work fine without it so far ... + */ + + /* Get max frequency from device-tree */ + valp = (u32 *)get_property(cpunode, "clock-frequency", NULL); + if (!valp) { + printk(KERN_ERR "cpufreq: Can't find CPU frequency !\n"); + rc = -ENODEV; + goto bail; + } + + max_freq = (*valp)/1000; + + /* Now calculate reduced frequency by using the cpuid input freq + * ratio. This requires 64 bits math unless we are willing to lose + * some precision + */ + ih = *((u32 *)(eeprom + 0x10)); + il = *((u32 *)(eeprom + 0x20)); + min_freq = 0; + if (ih != 0 && il != 0) + min_freq = (max_freq * il) / ih; + + /* Sanity check */ + if (min_freq >= max_freq || min_freq < 1000) { + printk(KERN_ERR "cpufreq: Can't calculate low frequency !\n"); + rc = -ENODEV; + goto bail; + } + g5_cpu_freqs[0].frequency = max_freq; + g5_cpu_freqs[1].frequency = min_freq; + + /* Set callbacks */ + g5_switch_volt = g5_pfunc_switch_volt; + g5_switch_freq = g5_pfunc_switch_freq; + g5_query_freq = g5_pfunc_query_freq; + + /* Force apply current frequency to make sure everything is in + * sync (voltage is right for example). Firmware may leave us with + * a strange setting ... + */ + g5_switch_volt(CPUFREQ_HIGH); + msleep(10); + g5_pmode_cur = -1; + g5_switch_freq(g5_query_freq()); + + printk(KERN_INFO "Registering G5 CPU frequency driver\n"); + printk(KERN_INFO "Frequency method: i2c/pfunc, " + "Voltage method: %s\n", has_volt ? "i2c/pfunc" : "none"); + printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n", + g5_cpu_freqs[1].frequency/1000, + g5_cpu_freqs[0].frequency/1000, + g5_cpu_freqs[g5_pmode_cur].frequency/1000); + + rc = cpufreq_register_driver(&g5_cpufreq_driver); + bail: + if (rc != 0) { + pmf_put_function(pfunc_cpu_getfreq); + pmf_put_function(pfunc_cpu_setfreq_high); + pmf_put_function(pfunc_cpu_setfreq_low); + pmf_put_function(pfunc_slewing_done); + pmf_put_function(pfunc_cpu0_volt_high); + pmf_put_function(pfunc_cpu0_volt_low); + pmf_put_function(pfunc_cpu1_volt_high); + pmf_put_function(pfunc_cpu1_volt_low); + } + of_node_put(hwclock); + of_node_put(cpuid); + of_node_put(cpunode); + + return rc; +} + +static int __init g5_rm31_cpufreq_init(struct device_node *cpus) +{ + /* NYI */ + return 0; +} + +static int __init g5_cpufreq_init(void) +{ + struct device_node *cpus; + int rc; + + cpus = of_find_node_by_path("/cpus"); + if (cpus == NULL) { + DBG("No /cpus node !\n"); + return -ENODEV; + } + + if (machine_is_compatible("PowerMac7,2") || + machine_is_compatible("PowerMac7,3")) + rc = g5_pm72_cpufreq_init(cpus); + else if (machine_is_compatible("RackMac3,1")) + rc = g5_rm31_cpufreq_init(cpus); + else + rc = g5_neo2_cpufreq_init(cpus); + + of_node_put(cpus); + return rc; +} + module_init(g5_cpufreq_init); diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c index f6e22da..558dd06 100644 --- a/arch/powerpc/platforms/powermac/feature.c +++ b/arch/powerpc/platforms/powermac/feature.c @@ -58,12 +58,11 @@ extern int powersave_lowspeed; extern int powersave_nap; extern struct device_node *k2_skiplist[2]; - /* * We use a single global lock to protect accesses. Each driver has * to take care of its own locking */ -static DEFINE_SPINLOCK(feature_lock); +DEFINE_SPINLOCK(feature_lock); #define LOCK(flags) spin_lock_irqsave(&feature_lock, flags); #define UNLOCK(flags) spin_unlock_irqrestore(&feature_lock, flags); @@ -101,26 +100,17 @@ static const char *macio_names[] = "Keylargo", "Pangea", "Intrepid", - "K2" + "K2", + "Shasta", }; +struct device_node *uninorth_node; +u32 __iomem *uninorth_base; -/* - * Uninorth reg. access. Note that Uni-N regs are big endian - */ - -#define UN_REG(r) (uninorth_base + ((r) >> 2)) -#define UN_IN(r) (in_be32(UN_REG(r))) -#define UN_OUT(r,v) (out_be32(UN_REG(r), (v))) -#define UN_BIS(r,v) (UN_OUT((r), UN_IN(r) | (v))) -#define UN_BIC(r,v) (UN_OUT((r), UN_IN(r) & ~(v))) - -static struct device_node *uninorth_node; -static u32 __iomem *uninorth_base; static u32 uninorth_rev; -static int uninorth_u3; -static void __iomem *u3_ht; +static int uninorth_maj; +static void __iomem *u3_ht_base; /* * For each motherboard family, we have a table of functions pointers @@ -1399,8 +1389,15 @@ static long g5_fw_enable(struct device_node *node, long param, long value) static long g5_mpic_enable(struct device_node *node, long param, long value) { unsigned long flags; + struct device_node *parent = of_get_parent(node); + int is_u3; - if (node->parent == NULL || strcmp(node->parent->name, "u3")) + if (parent == NULL) + return 0; + is_u3 = strcmp(parent->name, "u3") == 0 || + strcmp(parent->name, "u4") == 0; + of_node_put(parent); + if (!is_u3) return 0; LOCK(flags); @@ -1445,20 +1442,53 @@ static long g5_i2s_enable(struct device_node *node, long param, long value) /* Very crude implementation for now */ struct macio_chip *macio = &macio_chips[0]; unsigned long flags; - - if (value == 0) - return 0; /* don't disable yet */ + int cell; + u32 fcrs[3][3] = { + { 0, + K2_FCR1_I2S0_CELL_ENABLE | + K2_FCR1_I2S0_CLK_ENABLE_BIT | K2_FCR1_I2S0_ENABLE, + KL3_I2S0_CLK18_ENABLE + }, + { KL0_SCC_A_INTF_ENABLE, + K2_FCR1_I2S1_CELL_ENABLE | + K2_FCR1_I2S1_CLK_ENABLE_BIT | K2_FCR1_I2S1_ENABLE, + KL3_I2S1_CLK18_ENABLE + }, + { KL0_SCC_B_INTF_ENABLE, + SH_FCR1_I2S2_CELL_ENABLE | + SH_FCR1_I2S2_CLK_ENABLE_BIT | SH_FCR1_I2S2_ENABLE, + SH_FCR3_I2S2_CLK18_ENABLE + }, + }; + + if (macio->type != macio_keylargo2 && macio->type != macio_shasta) + return -ENODEV; + if (strncmp(node->name, "i2s-", 4)) + return -ENODEV; + cell = node->name[4] - 'a'; + switch(cell) { + case 0: + case 1: + break; + case 2: + if (macio->type == macio_shasta) + break; + default: + return -ENODEV; + } LOCK(flags); - MACIO_BIS(KEYLARGO_FCR3, KL3_CLK45_ENABLE | KL3_CLK49_ENABLE | - KL3_I2S0_CLK18_ENABLE); - udelay(10); - MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_I2S0_CELL_ENABLE | - K2_FCR1_I2S0_CLK_ENABLE_BIT | K2_FCR1_I2S0_ENABLE); + if (value) { + MACIO_BIC(KEYLARGO_FCR0, fcrs[cell][0]); + MACIO_BIS(KEYLARGO_FCR1, fcrs[cell][1]); + MACIO_BIS(KEYLARGO_FCR3, fcrs[cell][2]); + } else { + MACIO_BIC(KEYLARGO_FCR3, fcrs[cell][2]); + MACIO_BIC(KEYLARGO_FCR1, fcrs[cell][1]); + MACIO_BIS(KEYLARGO_FCR0, fcrs[cell][0]); + } udelay(10); - MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_I2S0_RESET); UNLOCK(flags); - udelay(10); return 0; } @@ -1473,7 +1503,7 @@ static long g5_reset_cpu(struct device_node *node, long param, long value) struct device_node *np; macio = &macio_chips[0]; - if (macio->type != macio_keylargo2) + if (macio->type != macio_keylargo2 && macio->type != macio_shasta) return -ENODEV; np = find_path_device("/cpus"); @@ -1512,14 +1542,17 @@ static long g5_reset_cpu(struct device_node *node, long param, long value) */ void g5_phy_disable_cpu1(void) { - UN_OUT(U3_API_PHY_CONFIG_1, 0); + if (uninorth_maj == 3) + UN_OUT(U3_API_PHY_CONFIG_1, 0); } #endif /* CONFIG_POWER4 */ #ifndef CONFIG_POWER4 -static void -keylargo_shutdown(struct macio_chip *macio, int sleep_mode) + +#ifdef CONFIG_PM + +static void keylargo_shutdown(struct macio_chip *macio, int sleep_mode) { u32 temp; @@ -1572,8 +1605,7 @@ keylargo_shutdown(struct macio_chip *macio, int sleep_mode) (void)MACIO_IN32(KEYLARGO_FCR0); mdelay(1); } -static void -pangea_shutdown(struct macio_chip *macio, int sleep_mode) +static void pangea_shutdown(struct macio_chip *macio, int sleep_mode) { u32 temp; @@ -1606,8 +1638,7 @@ pangea_shutdown(struct macio_chip *macio, int sleep_mode) (void)MACIO_IN32(KEYLARGO_FCR0); mdelay(1); } -static void -intrepid_shutdown(struct macio_chip *macio, int sleep_mode) +static void intrepid_shutdown(struct macio_chip *macio, int sleep_mode) { u32 temp; @@ -1635,124 +1666,6 @@ intrepid_shutdown(struct macio_chip *macio, int sleep_mode) } -void pmac_tweak_clock_spreading(int enable) -{ - struct macio_chip *macio = &macio_chips[0]; - - /* Hack for doing clock spreading on some machines PowerBooks and - * iBooks. This implements the "platform-do-clockspreading" OF - * property as decoded manually on various models. For safety, we also - * check the product ID in the device-tree in cases we'll whack the i2c - * chip to make reasonably sure we won't set wrong values in there - * - * Of course, ultimately, we have to implement a real parser for - * the platform-do-* stuff... - */ - - if (macio->type == macio_intrepid) { - struct device_node *clock = - of_find_node_by_path("/uni-n@f8000000/hw-clock"); - if (clock && get_property(clock, "platform-do-clockspreading", - NULL)) { - printk(KERN_INFO "%sabling clock spreading on Intrepid" - " ASIC\n", enable ? "En" : "Dis"); - if (enable) - UN_OUT(UNI_N_CLOCK_SPREADING, 2); - else - UN_OUT(UNI_N_CLOCK_SPREADING, 0); - mdelay(40); - } - of_node_put(clock); - } - - while (machine_is_compatible("PowerBook5,2") || - machine_is_compatible("PowerBook5,3") || - machine_is_compatible("PowerBook6,2") || - machine_is_compatible("PowerBook6,3")) { - struct device_node *ui2c = of_find_node_by_type(NULL, "i2c"); - struct device_node *dt = of_find_node_by_name(NULL, "device-tree"); - u8 buffer[9]; - u32 *productID; - int i, rc, changed = 0; - - if (dt == NULL) - break; - productID = (u32 *)get_property(dt, "pid#", NULL); - if (productID == NULL) - break; - while(ui2c) { - struct device_node *p = of_get_parent(ui2c); - if (p && !strcmp(p->name, "uni-n")) - break; - ui2c = of_find_node_by_type(ui2c, "i2c"); - } - if (ui2c == NULL) - break; - DBG("Trying to bump clock speed for PID: %08x...\n", *productID); - rc = pmac_low_i2c_open(ui2c, 1); - if (rc != 0) - break; - pmac_low_i2c_setmode(ui2c, pmac_low_i2c_mode_combined); - rc = pmac_low_i2c_xfer(ui2c, 0xd2 | pmac_low_i2c_read, 0x80, buffer, 9); - DBG("read result: %d,", rc); - if (rc != 0) { - pmac_low_i2c_close(ui2c); - break; - } - for (i=0; i<9; i++) - DBG(" %02x", buffer[i]); - DBG("\n"); - - switch(*productID) { - case 0x1182: /* AlBook 12" rev 2 */ - case 0x1183: /* iBook G4 12" */ - buffer[0] = (buffer[0] & 0x8f) | 0x70; - buffer[2] = (buffer[2] & 0x7f) | 0x00; - buffer[5] = (buffer[5] & 0x80) | 0x31; - buffer[6] = (buffer[6] & 0x40) | 0xb0; - buffer[7] = (buffer[7] & 0x00) | (enable ? 0xc0 : 0xba); - buffer[8] = (buffer[8] & 0x00) | 0x30; - changed = 1; - break; - case 0x3142: /* AlBook 15" (ATI M10) */ - case 0x3143: /* AlBook 17" (ATI M10) */ - buffer[0] = (buffer[0] & 0xaf) | 0x50; - buffer[2] = (buffer[2] & 0x7f) | 0x00; - buffer[5] = (buffer[5] & 0x80) | 0x31; - buffer[6] = (buffer[6] & 0x40) | 0xb0; - buffer[7] = (buffer[7] & 0x00) | (enable ? 0xd0 : 0xc0); - buffer[8] = (buffer[8] & 0x00) | 0x30; - changed = 1; - break; - default: - DBG("i2c-hwclock: Machine model not handled\n"); - break; - } - if (!changed) { - pmac_low_i2c_close(ui2c); - break; - } - printk(KERN_INFO "%sabling clock spreading on i2c clock chip\n", - enable ? "En" : "Dis"); - - pmac_low_i2c_setmode(ui2c, pmac_low_i2c_mode_stdsub); - rc = pmac_low_i2c_xfer(ui2c, 0xd2 | pmac_low_i2c_write, 0x80, buffer, 9); - DBG("write result: %d,", rc); - pmac_low_i2c_setmode(ui2c, pmac_low_i2c_mode_combined); - rc = pmac_low_i2c_xfer(ui2c, 0xd2 | pmac_low_i2c_read, 0x80, buffer, 9); - DBG("read result: %d,", rc); - if (rc != 0) { - pmac_low_i2c_close(ui2c); - break; - } - for (i=0; i<9; i++) - DBG(" %02x", buffer[i]); - pmac_low_i2c_close(ui2c); - break; - } -} - - static int core99_sleep(void) { @@ -1909,6 +1822,8 @@ core99_wake_up(void) return 0; } +#endif /* CONFIG_PM */ + static long core99_sleep_state(struct device_node *node, long param, long value) { @@ -1930,10 +1845,13 @@ core99_sleep_state(struct device_node *node, long param, long value) if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0) return -EPERM; +#ifdef CONFIG_PM if (value == 1) return core99_sleep(); else if (value == 0) return core99_wake_up(); + +#endif /* CONFIG_PM */ return 0; } @@ -2057,7 +1975,9 @@ static struct feature_table_entry core99_features[] = { { PMAC_FTR_USB_ENABLE, core99_usb_enable }, { PMAC_FTR_1394_ENABLE, core99_firewire_enable }, { PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power }, +#ifdef CONFIG_PM { PMAC_FTR_SLEEP_STATE, core99_sleep_state }, +#endif #ifdef CONFIG_SMP { PMAC_FTR_RESET_CPU, core99_reset_cpu }, #endif /* CONFIG_SMP */ @@ -2427,6 +2347,14 @@ static struct pmac_mb_def pmac_mb_defs[] = { PMAC_TYPE_POWERMAC_G5_U3L, g5_features, 0, }, + { "PowerMac11,2", "PowerMac G5 Dual Core", + PMAC_TYPE_POWERMAC_G5_U3L, g5_features, + 0, + }, + { "PowerMac12,1", "iMac G5 (iSight)", + PMAC_TYPE_POWERMAC_G5_U3L, g5_features, + 0, + }, { "RackMac3,1", "XServe G5", PMAC_TYPE_XSERVE_G5, g5_features, 0, @@ -2539,6 +2467,11 @@ static int __init probe_motherboard(void) pmac_mb.model_name = "Unknown K2-based"; pmac_mb.features = g5_features; break; + case macio_shasta: + pmac_mb.model_id = PMAC_TYPE_UNKNOWN_SHASTA; + pmac_mb.model_name = "Unknown Shasta-based"; + pmac_mb.features = g5_features; + break; #endif /* CONFIG_POWER4 */ default: return -ENODEV; @@ -2607,6 +2540,8 @@ found: */ static void __init probe_uninorth(void) { + u32 *addrp; + phys_addr_t address; unsigned long actrl; /* Locate core99 Uni-N */ @@ -2614,22 +2549,31 @@ static void __init probe_uninorth(void) /* Locate G5 u3 */ if (uninorth_node == NULL) { uninorth_node = of_find_node_by_name(NULL, "u3"); - uninorth_u3 = 1; - } - if (uninorth_node && uninorth_node->n_addrs > 0) { - unsigned long address = uninorth_node->addrs[0].address; - uninorth_base = ioremap(address, 0x40000); - uninorth_rev = in_be32(UN_REG(UNI_N_VERSION)); - if (uninorth_u3) - u3_ht = ioremap(address + U3_HT_CONFIG_BASE, 0x1000); - } else - uninorth_node = NULL; - - if (!uninorth_node) + uninorth_maj = 3; + } + /* Locate G5 u4 */ + if (uninorth_node == NULL) { + uninorth_node = of_find_node_by_name(NULL, "u4"); + uninorth_maj = 4; + } + if (uninorth_node == NULL) return; - printk(KERN_INFO "Found %s memory controller & host bridge, revision: %d\n", - uninorth_u3 ? "U3" : "UniNorth", uninorth_rev); + addrp = (u32 *)get_property(uninorth_node, "reg", NULL); + if (addrp == NULL) + return; + address = of_translate_address(uninorth_node, addrp); + if (address == 0) + return; + uninorth_base = ioremap(address, 0x40000); + uninorth_rev = in_be32(UN_REG(UNI_N_VERSION)); + if (uninorth_maj == 3 || uninorth_maj == 4) + u3_ht_base = ioremap(address + U3_HT_CONFIG_BASE, 0x1000); + + printk(KERN_INFO "Found %s memory controller & host bridge" + " @ 0x%08x revision: 0x%02x\n", uninorth_maj == 3 ? "U3" : + uninorth_maj == 4 ? "U4" : "UniNorth", + (unsigned int)address, uninorth_rev); printk(KERN_INFO "Mapped at 0x%08lx\n", (unsigned long)uninorth_base); /* Set the arbitrer QAck delay according to what Apple does @@ -2637,7 +2581,8 @@ static void __init probe_uninorth(void) if (uninorth_rev < 0x11) { actrl = UN_IN(UNI_N_ARB_CTRL) & ~UNI_N_ARB_CTRL_QACK_DELAY_MASK; actrl |= ((uninorth_rev < 3) ? UNI_N_ARB_CTRL_QACK_DELAY105 : - UNI_N_ARB_CTRL_QACK_DELAY) << UNI_N_ARB_CTRL_QACK_DELAY_SHIFT; + UNI_N_ARB_CTRL_QACK_DELAY) << + UNI_N_ARB_CTRL_QACK_DELAY_SHIFT; UN_OUT(UNI_N_ARB_CTRL, actrl); } @@ -2645,7 +2590,8 @@ static void __init probe_uninorth(void) * revs 1.5 to 2.O and Pangea. Seem to toggle the UniN Maxbus/PCI * memory timeout */ - if ((uninorth_rev >= 0x11 && uninorth_rev <= 0x24) || uninorth_rev == 0xc0) + if ((uninorth_rev >= 0x11 && uninorth_rev <= 0x24) || + uninorth_rev == 0xc0) UN_OUT(0x2160, UN_IN(0x2160) & 0x00ffffff); } @@ -2653,18 +2599,17 @@ static void __init probe_one_macio(const char *name, const char *compat, int typ { struct device_node* node; int i; - volatile u32 __iomem * base; - u32* revp; + volatile u32 __iomem *base; + u32 *addrp, *revp; + phys_addr_t addr; + u64 size; - node = find_devices(name); - if (!node || !node->n_addrs) - return; - if (compat) - do { - if (device_is_compatible(node, compat)) - break; - node = node->next; - } while (node); + for (node = NULL; (node = of_find_node_by_name(node, name)) != NULL;) { + if (!compat) + break; + if (device_is_compatible(node, compat)) + break; + } if (!node) return; for(i=0; i<MAX_MACIO_CHIPS; i++) { @@ -2673,22 +2618,38 @@ static void __init probe_one_macio(const char *name, const char *compat, int typ if (macio_chips[i].of_node == node) return; } + if (i >= MAX_MACIO_CHIPS) { printk(KERN_ERR "pmac_feature: Please increase MAX_MACIO_CHIPS !\n"); printk(KERN_ERR "pmac_feature: %s skipped\n", node->full_name); return; } - base = ioremap(node->addrs[0].address, node->addrs[0].size); + addrp = of_get_pci_address(node, 0, &size, NULL); + if (addrp == NULL) { + printk(KERN_ERR "pmac_feature: %s: can't find base !\n", + node->full_name); + return; + } + addr = of_translate_address(node, addrp); + if (addr == 0) { + printk(KERN_ERR "pmac_feature: %s, can't translate base !\n", + node->full_name); + return; + } + base = ioremap(addr, (unsigned long)size); if (!base) { - printk(KERN_ERR "pmac_feature: Can't map mac-io chip !\n"); + printk(KERN_ERR "pmac_feature: %s, can't map mac-io chip !\n", + node->full_name); return; } - if (type == macio_keylargo) { + if (type == macio_keylargo || type == macio_keylargo2) { u32 *did = (u32 *)get_property(node, "device-id", NULL); if (*did == 0x00000025) type = macio_pangea; if (*did == 0x0000003e) type = macio_intrepid; + if (*did == 0x0000004f) + type = macio_shasta; } macio_chips[i].of_node = node; macio_chips[i].type = type; @@ -2787,7 +2748,8 @@ set_initial_features(void) } #ifdef CONFIG_POWER4 - if (macio_chips[0].type == macio_keylargo2) { + if (macio_chips[0].type == macio_keylargo2 || + macio_chips[0].type == macio_shasta) { #ifndef CONFIG_SMP /* On SMP machines running UP, we have the second CPU eating * bus cycles. We need to take it off the bus. This is done @@ -2896,12 +2858,6 @@ set_initial_features(void) MACIO_BIC(HEATHROW_FCR, HRW_SOUND_POWER_N); } - /* Some machine models need the clock chip to be properly setup for - * clock spreading now. This should be a platform function but we - * don't do these at the moment - */ - pmac_tweak_clock_spreading(1); - #endif /* CONFIG_POWER4 */ /* On all machines, switch modem & serial ports off */ @@ -2929,9 +2885,6 @@ pmac_feature_init(void) return; } - /* Setup low-level i2c stuffs */ - pmac_init_low_i2c(); - /* Probe machine type */ if (probe_motherboard()) printk(KERN_WARNING "Unknown PowerMac !\n"); @@ -2942,26 +2895,6 @@ pmac_feature_init(void) set_initial_features(); } -int __init pmac_feature_late_init(void) -{ -#if 0 - struct device_node *np; - - /* Request some resources late */ - if (uninorth_node) - request_OF_resource(uninorth_node, 0, NULL); - np = find_devices("hammerhead"); - if (np) - request_OF_resource(np, 0, NULL); - np = find_devices("interrupt-controller"); - if (np) - request_OF_resource(np, 0, NULL); -#endif - return 0; -} - -device_initcall(pmac_feature_late_init); - #if 0 static void dump_HT_speeds(char *name, u32 cfg, u32 frq) { @@ -2984,9 +2917,9 @@ void __init pmac_check_ht_link(void) u8 px_bus, px_devfn; struct pci_controller *px_hose; - (void)in_be32(u3_ht + U3_HT_LINK_COMMAND); - ucfg = cfg = in_be32(u3_ht + U3_HT_LINK_CONFIG); - ufreq = freq = in_be32(u3_ht + U3_HT_LINK_FREQ); + (void)in_be32(u3_ht_base + U3_HT_LINK_COMMAND); + ucfg = cfg = in_be32(u3_ht_base + U3_HT_LINK_CONFIG); + ufreq = freq = in_be32(u3_ht_base + U3_HT_LINK_FREQ); dump_HT_speeds("U3 HyperTransport", cfg, freq); pcix_node = of_find_compatible_node(NULL, "pci", "pci-x"); diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c index f3f39e8..535c802 100644 --- a/arch/powerpc/platforms/powermac/low_i2c.c +++ b/arch/powerpc/platforms/powermac/low_i2c.c @@ -1,22 +1,34 @@ /* - * arch/ppc/platforms/pmac_low_i2c.c + * arch/powerpc/platforms/powermac/low_i2c.c * - * Copyright (C) 2003 Ben. Herrenschmidt (benh@kernel.crashing.org) + * Copyright (C) 2003-2005 Ben. Herrenschmidt (benh@kernel.crashing.org) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. * - * This file contains some low-level i2c access routines that - * need to be used by various bits of the PowerMac platform code - * at times where the real asynchronous & interrupt driven driver - * cannot be used. The API borrows some semantics from the darwin - * driver in order to ease the implementation of the platform - * properties parser + * The linux i2c layer isn't completely suitable for our needs for various + * reasons ranging from too late initialisation to semantics not perfectly + * matching some requirements of the apple platform functions etc... + * + * This file thus provides a simple low level unified i2c interface for + * powermac that covers the various types of i2c busses used in Apple machines. + * For now, keywest, PMU and SMU, though we could add Cuda, or other bit + * banging busses found on older chipstes in earlier machines if we ever need + * one of them. + * + * The drivers in this file are synchronous/blocking. In addition, the + * keywest one is fairly slow due to the use of msleep instead of interrupts + * as the interrupt is currently used by i2c-keywest. In the long run, we + * might want to get rid of those high-level interfaces to linux i2c layer + * either completely (converting all drivers) or replacing them all with a + * single stub driver on top of this one. Once done, the interrupt will be + * available for our use. */ #undef DEBUG +#undef DEBUG_LOW #include <linux/config.h> #include <linux/types.h> @@ -25,66 +37,91 @@ #include <linux/module.h> #include <linux/adb.h> #include <linux/pmu.h> +#include <linux/delay.h> +#include <linux/completion.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/completion.h> +#include <linux/timer.h> #include <asm/keylargo.h> #include <asm/uninorth.h> #include <asm/io.h> #include <asm/prom.h> #include <asm/machdep.h> +#include <asm/smu.h> +#include <asm/pmac_pfunc.h> #include <asm/pmac_low_i2c.h> -#define MAX_LOW_I2C_HOST 4 - #ifdef DEBUG #define DBG(x...) do {\ - printk(KERN_DEBUG "KW:" x); \ + printk(KERN_DEBUG "low_i2c:" x); \ } while(0) #else #define DBG(x...) #endif -struct low_i2c_host; - -typedef int (*low_i2c_func_t)(struct low_i2c_host *host, u8 addr, u8 sub, u8 *data, int len); +#ifdef DEBUG_LOW +#define DBG_LOW(x...) do {\ + printk(KERN_DEBUG "low_i2c:" x); \ + } while(0) +#else +#define DBG_LOW(x...) +#endif -struct low_i2c_host -{ - struct device_node *np; /* OF device node */ - struct semaphore mutex; /* Access mutex for use by i2c-keywest */ - low_i2c_func_t func; /* Access function */ - unsigned int is_open : 1; /* Poor man's access control */ - int mode; /* Current mode */ - int channel; /* Current channel */ - int num_channels; /* Number of channels */ - void __iomem *base; /* For keywest-i2c, base address */ - int bsteps; /* And register stepping */ - int speed; /* And speed */ -}; -static struct low_i2c_host low_i2c_hosts[MAX_LOW_I2C_HOST]; +static int pmac_i2c_force_poll = 1; -/* No locking is necessary on allocation, we are running way before - * anything can race with us +/* + * A bus structure. Each bus in the system has such a structure associated. */ -static struct low_i2c_host *find_low_i2c_host(struct device_node *np) +struct pmac_i2c_bus { - int i; + struct list_head link; + struct device_node *controller; + struct device_node *busnode; + int type; + int flags; + struct i2c_adapter *adapter; + void *hostdata; + int channel; /* some hosts have multiple */ + int mode; /* current mode */ + struct semaphore sem; + int opened; + int polled; /* open mode */ + struct platform_device *platform_dev; + + /* ops */ + int (*open)(struct pmac_i2c_bus *bus); + void (*close)(struct pmac_i2c_bus *bus); + int (*xfer)(struct pmac_i2c_bus *bus, u8 addrdir, int subsize, + u32 subaddr, u8 *data, int len); +}; - for (i = 0; i < MAX_LOW_I2C_HOST; i++) - if (low_i2c_hosts[i].np == np) - return &low_i2c_hosts[i]; - return NULL; -} +static LIST_HEAD(pmac_i2c_busses); /* - * - * i2c-keywest implementation (UniNorth, U2, U3, Keylargo's) - * + * Keywest implementation */ -/* - * Keywest i2c definitions borrowed from drivers/i2c/i2c-keywest.h, - * should be moved somewhere in include/asm-ppc/ - */ +struct pmac_i2c_host_kw +{ + struct semaphore mutex; /* Access mutex for use by + * i2c-keywest */ + void __iomem *base; /* register base address */ + int bsteps; /* register stepping */ + int speed; /* speed */ + int irq; + u8 *data; + unsigned len; + int state; + int rw; + int polled; + int result; + struct completion complete; + spinlock_t lock; + struct timer_list timeout_timer; +}; + /* Register indices */ typedef enum { reg_mode = 0, @@ -97,6 +134,8 @@ typedef enum { reg_data } reg_t; +/* The Tumbler audio equalizer can be really slow sometimes */ +#define KW_POLL_TIMEOUT (2*HZ) /* Mode register */ #define KW_I2C_MODE_100KHZ 0x00 @@ -140,8 +179,9 @@ enum { }; #define WRONG_STATE(name) do {\ - printk(KERN_DEBUG "KW: wrong state. Got %s, state: %s (isr: %02x)\n", \ - name, __kw_state_names[state], isr); \ + printk(KERN_DEBUG "KW: wrong state. Got %s, state: %s " \ + "(isr: %02x)\n", \ + name, __kw_state_names[host->state], isr); \ } while(0) static const char *__kw_state_names[] = { @@ -153,120 +193,137 @@ static const char *__kw_state_names[] = { "state_dead" }; -static inline u8 __kw_read_reg(struct low_i2c_host *host, reg_t reg) +static inline u8 __kw_read_reg(struct pmac_i2c_host_kw *host, reg_t reg) { return readb(host->base + (((unsigned int)reg) << host->bsteps)); } -static inline void __kw_write_reg(struct low_i2c_host *host, reg_t reg, u8 val) +static inline void __kw_write_reg(struct pmac_i2c_host_kw *host, + reg_t reg, u8 val) { writeb(val, host->base + (((unsigned)reg) << host->bsteps)); (void)__kw_read_reg(host, reg_subaddr); } -#define kw_write_reg(reg, val) __kw_write_reg(host, reg, val) -#define kw_read_reg(reg) __kw_read_reg(host, reg) - +#define kw_write_reg(reg, val) __kw_write_reg(host, reg, val) +#define kw_read_reg(reg) __kw_read_reg(host, reg) -/* Don't schedule, the g5 fan controller is too - * timing sensitive - */ -static u8 kw_wait_interrupt(struct low_i2c_host* host) +static u8 kw_i2c_wait_interrupt(struct pmac_i2c_host_kw *host) { int i, j; u8 isr; - for (i = 0; i < 100000; i++) { + for (i = 0; i < 1000; i++) { isr = kw_read_reg(reg_isr) & KW_I2C_IRQ_MASK; if (isr != 0) return isr; /* This code is used with the timebase frozen, we cannot rely - * on udelay ! For now, just use a bogus loop + * on udelay nor schedule when in polled mode ! + * For now, just use a bogus loop.... */ - for (j = 1; j < 10000; j++) - mb(); + if (host->polled) { + for (j = 1; j < 100000; j++) + mb(); + } else + msleep(1); } return isr; } -static int kw_handle_interrupt(struct low_i2c_host *host, int state, int rw, int *rc, u8 **data, int *len, u8 isr) +static void kw_i2c_handle_interrupt(struct pmac_i2c_host_kw *host, u8 isr) { u8 ack; - DBG("kw_handle_interrupt(%s, isr: %x)\n", __kw_state_names[state], isr); + DBG_LOW("kw_handle_interrupt(%s, isr: %x)\n", + __kw_state_names[host->state], isr); + + if (host->state == state_idle) { + printk(KERN_WARNING "low_i2c: Keywest got an out of state" + " interrupt, ignoring\n"); + kw_write_reg(reg_isr, isr); + return; + } if (isr == 0) { - if (state != state_stop) { - DBG("KW: Timeout !\n"); - *rc = -EIO; + if (host->state != state_stop) { + DBG_LOW("KW: Timeout !\n"); + host->result = -EIO; goto stop; } - if (state == state_stop) { + if (host->state == state_stop) { ack = kw_read_reg(reg_status); - if (!(ack & KW_I2C_STAT_BUSY)) { - state = state_idle; - kw_write_reg(reg_ier, 0x00); - } + if (ack & KW_I2C_STAT_BUSY) + kw_write_reg(reg_status, 0); + host->state = state_idle; + kw_write_reg(reg_ier, 0x00); + if (!host->polled) + complete(&host->complete); } - return state; + return; } if (isr & KW_I2C_IRQ_ADDR) { ack = kw_read_reg(reg_status); - if (state != state_addr) { + if (host->state != state_addr) { kw_write_reg(reg_isr, KW_I2C_IRQ_ADDR); WRONG_STATE("KW_I2C_IRQ_ADDR"); - *rc = -EIO; + host->result = -EIO; goto stop; } - if ((ack & KW_I2C_STAT_LAST_AAK) == 0) { - *rc = -ENODEV; - DBG("KW: NAK on address\n"); - return state_stop; + if ((ack & KW_I2C_STAT_LAST_AAK) == 0) { + host->result = -ENODEV; + DBG_LOW("KW: NAK on address\n"); + host->state = state_stop; + return; } else { - if (rw) { - state = state_read; - if (*len > 1) - kw_write_reg(reg_control, KW_I2C_CTL_AAK); + if (host->len == 0) { + kw_write_reg(reg_isr, KW_I2C_IRQ_ADDR); + goto stop; + } + if (host->rw) { + host->state = state_read; + if (host->len > 1) + kw_write_reg(reg_control, + KW_I2C_CTL_AAK); } else { - state = state_write; - kw_write_reg(reg_data, **data); - (*data)++; (*len)--; + host->state = state_write; + kw_write_reg(reg_data, *(host->data++)); + host->len--; } } kw_write_reg(reg_isr, KW_I2C_IRQ_ADDR); } if (isr & KW_I2C_IRQ_DATA) { - if (state == state_read) { - **data = kw_read_reg(reg_data); - (*data)++; (*len)--; + if (host->state == state_read) { + *(host->data++) = kw_read_reg(reg_data); + host->len--; kw_write_reg(reg_isr, KW_I2C_IRQ_DATA); - if ((*len) == 0) - state = state_stop; - else if ((*len) == 1) + if (host->len == 0) + host->state = state_stop; + else if (host->len == 1) kw_write_reg(reg_control, 0); - } else if (state == state_write) { + } else if (host->state == state_write) { ack = kw_read_reg(reg_status); if ((ack & KW_I2C_STAT_LAST_AAK) == 0) { - DBG("KW: nack on data write\n"); - *rc = -EIO; + DBG_LOW("KW: nack on data write\n"); + host->result = -EIO; goto stop; - } else if (*len) { - kw_write_reg(reg_data, **data); - (*data)++; (*len)--; + } else if (host->len) { + kw_write_reg(reg_data, *(host->data++)); + host->len--; } else { kw_write_reg(reg_control, KW_I2C_CTL_STOP); - state = state_stop; - *rc = 0; + host->state = state_stop; + host->result = 0; } kw_write_reg(reg_isr, KW_I2C_IRQ_DATA); } else { kw_write_reg(reg_isr, KW_I2C_IRQ_DATA); WRONG_STATE("KW_I2C_IRQ_DATA"); - if (state != state_stop) { - *rc = -EIO; + if (host->state != state_stop) { + host->result = -EIO; goto stop; } } @@ -274,98 +331,194 @@ static int kw_handle_interrupt(struct low_i2c_host *host, int state, int rw, int if (isr & KW_I2C_IRQ_STOP) { kw_write_reg(reg_isr, KW_I2C_IRQ_STOP); - if (state != state_stop) { + if (host->state != state_stop) { WRONG_STATE("KW_I2C_IRQ_STOP"); - *rc = -EIO; + host->result = -EIO; } - return state_idle; + host->state = state_idle; + if (!host->polled) + complete(&host->complete); } if (isr & KW_I2C_IRQ_START) kw_write_reg(reg_isr, KW_I2C_IRQ_START); - return state; - + return; stop: kw_write_reg(reg_control, KW_I2C_CTL_STOP); - return state_stop; + host->state = state_stop; + return; } -static int keywest_low_i2c_func(struct low_i2c_host *host, u8 addr, u8 subaddr, u8 *data, int len) +/* Interrupt handler */ +static irqreturn_t kw_i2c_irq(int irq, void *dev_id, struct pt_regs *regs) { + struct pmac_i2c_host_kw *host = dev_id; + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + del_timer(&host->timeout_timer); + kw_i2c_handle_interrupt(host, kw_read_reg(reg_isr)); + if (host->state != state_idle) { + host->timeout_timer.expires = jiffies + KW_POLL_TIMEOUT; + add_timer(&host->timeout_timer); + } + spin_unlock_irqrestore(&host->lock, flags); + return IRQ_HANDLED; +} + +static void kw_i2c_timeout(unsigned long data) +{ + struct pmac_i2c_host_kw *host = (struct pmac_i2c_host_kw *)data; + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + kw_i2c_handle_interrupt(host, kw_read_reg(reg_isr)); + if (host->state != state_idle) { + host->timeout_timer.expires = jiffies + KW_POLL_TIMEOUT; + add_timer(&host->timeout_timer); + } + spin_unlock_irqrestore(&host->lock, flags); +} + +static int kw_i2c_open(struct pmac_i2c_bus *bus) +{ + struct pmac_i2c_host_kw *host = bus->hostdata; + down(&host->mutex); + return 0; +} + +static void kw_i2c_close(struct pmac_i2c_bus *bus) +{ + struct pmac_i2c_host_kw *host = bus->hostdata; + up(&host->mutex); +} + +static int kw_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize, + u32 subaddr, u8 *data, int len) +{ + struct pmac_i2c_host_kw *host = bus->hostdata; u8 mode_reg = host->speed; - int state = state_addr; - int rc = 0; + int use_irq = host->irq != NO_IRQ && !bus->polled; /* Setup mode & subaddress if any */ - switch(host->mode) { - case pmac_low_i2c_mode_dumb: - printk(KERN_ERR "low_i2c: Dumb mode not supported !\n"); + switch(bus->mode) { + case pmac_i2c_mode_dumb: return -EINVAL; - case pmac_low_i2c_mode_std: + case pmac_i2c_mode_std: mode_reg |= KW_I2C_MODE_STANDARD; + if (subsize != 0) + return -EINVAL; break; - case pmac_low_i2c_mode_stdsub: + case pmac_i2c_mode_stdsub: mode_reg |= KW_I2C_MODE_STANDARDSUB; + if (subsize != 1) + return -EINVAL; break; - case pmac_low_i2c_mode_combined: + case pmac_i2c_mode_combined: mode_reg |= KW_I2C_MODE_COMBINED; + if (subsize != 1) + return -EINVAL; break; } /* Setup channel & clear pending irqs */ kw_write_reg(reg_isr, kw_read_reg(reg_isr)); - kw_write_reg(reg_mode, mode_reg | (host->channel << 4)); + kw_write_reg(reg_mode, mode_reg | (bus->channel << 4)); kw_write_reg(reg_status, 0); - /* Set up address and r/w bit */ - kw_write_reg(reg_addr, addr); + /* Set up address and r/w bit, strip possible stale bus number from + * address top bits + */ + kw_write_reg(reg_addr, addrdir & 0xff); /* Set up the sub address */ if ((mode_reg & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_STANDARDSUB || (mode_reg & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_COMBINED) kw_write_reg(reg_subaddr, subaddr); - /* Start sending address & disable interrupt*/ - kw_write_reg(reg_ier, 0 /*KW_I2C_IRQ_MASK*/); + /* Prepare for async operations */ + host->data = data; + host->len = len; + host->state = state_addr; + host->result = 0; + host->rw = (addrdir & 1); + host->polled = bus->polled; + + /* Enable interrupt if not using polled mode and interrupt is + * available + */ + if (use_irq) { + /* Clear completion */ + INIT_COMPLETION(host->complete); + /* Ack stale interrupts */ + kw_write_reg(reg_isr, kw_read_reg(reg_isr)); + /* Arm timeout */ + host->timeout_timer.expires = jiffies + KW_POLL_TIMEOUT; + add_timer(&host->timeout_timer); + /* Enable emission */ + kw_write_reg(reg_ier, KW_I2C_IRQ_MASK); + } + + /* Start sending address */ kw_write_reg(reg_control, KW_I2C_CTL_XADDR); - /* State machine, to turn into an interrupt handler */ - while(state != state_idle) { - u8 isr = kw_wait_interrupt(host); - state = kw_handle_interrupt(host, state, addr & 1, &rc, &data, &len, isr); + /* Wait for completion */ + if (use_irq) + wait_for_completion(&host->complete); + else { + while(host->state != state_idle) { + unsigned long flags; + + u8 isr = kw_i2c_wait_interrupt(host); + spin_lock_irqsave(&host->lock, flags); + kw_i2c_handle_interrupt(host, isr); + spin_unlock_irqrestore(&host->lock, flags); + } } - return rc; + /* Disable emission */ + kw_write_reg(reg_ier, 0); + + return host->result; } -static void keywest_low_i2c_add(struct device_node *np) +static struct pmac_i2c_host_kw *__init kw_i2c_host_init(struct device_node *np) { - struct low_i2c_host *host = find_low_i2c_host(NULL); - u32 *psteps, *prate, steps, aoffset = 0; - struct device_node *parent; + struct pmac_i2c_host_kw *host; + u32 *psteps, *prate, *addrp, steps; + host = kzalloc(sizeof(struct pmac_i2c_host_kw), GFP_KERNEL); if (host == NULL) { printk(KERN_ERR "low_i2c: Can't allocate host for %s\n", np->full_name); - return; + return NULL; } - memset(host, 0, sizeof(*host)); + /* Apple is kind enough to provide a valid AAPL,address property + * on all i2c keywest nodes so far ... we would have to fallback + * to macio parsing if that wasn't the case + */ + addrp = (u32 *)get_property(np, "AAPL,address", NULL); + if (addrp == NULL) { + printk(KERN_ERR "low_i2c: Can't find address for %s\n", + np->full_name); + kfree(host); + return NULL; + } init_MUTEX(&host->mutex); - host->np = of_node_get(np); + init_completion(&host->complete); + spin_lock_init(&host->lock); + init_timer(&host->timeout_timer); + host->timeout_timer.function = kw_i2c_timeout; + host->timeout_timer.data = (unsigned long)host; + psteps = (u32 *)get_property(np, "AAPL,address-step", NULL); steps = psteps ? (*psteps) : 0x10; for (host->bsteps = 0; (steps & 0x01) == 0; host->bsteps++) steps >>= 1; - parent = of_get_parent(np); - host->num_channels = 1; - if (parent && parent->name[0] == 'u') { - host->num_channels = 2; - aoffset = 3; - } /* Select interface rate */ - host->speed = KW_I2C_MODE_100KHZ; + host->speed = KW_I2C_MODE_25KHZ; prate = (u32 *)get_property(np, "AAPL,i2c-rate", NULL); if (prate) switch(*prate) { case 100: @@ -378,146 +531,981 @@ static void keywest_low_i2c_add(struct device_node *np) host->speed = KW_I2C_MODE_25KHZ; break; } + if (np->n_intrs > 0) + host->irq = np->intrs[0].line; + else + host->irq = NO_IRQ; + + host->base = ioremap((*addrp), 0x1000); + if (host->base == NULL) { + printk(KERN_ERR "low_i2c: Can't map registers for %s\n", + np->full_name); + kfree(host); + return NULL; + } + + /* Make sure IRA is disabled */ + kw_write_reg(reg_ier, 0); + + /* Request chip interrupt */ + if (request_irq(host->irq, kw_i2c_irq, SA_SHIRQ, "keywest i2c", host)) + host->irq = NO_IRQ; + + printk(KERN_INFO "KeyWest i2c @0x%08x irq %d %s\n", + *addrp, host->irq, np->full_name); - host->mode = pmac_low_i2c_mode_std; - host->base = ioremap(np->addrs[0].address + aoffset, - np->addrs[0].size); - host->func = keywest_low_i2c_func; + return host; } + +static void __init kw_i2c_add(struct pmac_i2c_host_kw *host, + struct device_node *controller, + struct device_node *busnode, + int channel) +{ + struct pmac_i2c_bus *bus; + + bus = kzalloc(sizeof(struct pmac_i2c_bus), GFP_KERNEL); + if (bus == NULL) + return; + + bus->controller = of_node_get(controller); + bus->busnode = of_node_get(busnode); + bus->type = pmac_i2c_bus_keywest; + bus->hostdata = host; + bus->channel = channel; + bus->mode = pmac_i2c_mode_std; + bus->open = kw_i2c_open; + bus->close = kw_i2c_close; + bus->xfer = kw_i2c_xfer; + init_MUTEX(&bus->sem); + if (controller == busnode) + bus->flags = pmac_i2c_multibus; + list_add(&bus->link, &pmac_i2c_busses); + + printk(KERN_INFO " channel %d bus %s\n", channel, + (controller == busnode) ? "<multibus>" : busnode->full_name); +} + +static void __init kw_i2c_probe(void) +{ + struct device_node *np, *child, *parent; + + /* Probe keywest-i2c busses */ + for (np = NULL; + (np = of_find_compatible_node(np, "i2c","keywest-i2c")) != NULL;){ + struct pmac_i2c_host_kw *host; + int multibus, chans, i; + + /* Found one, init a host structure */ + host = kw_i2c_host_init(np); + if (host == NULL) + continue; + + /* Now check if we have a multibus setup (old style) or if we + * have proper bus nodes. Note that the "new" way (proper bus + * nodes) might cause us to not create some busses that are + * kept hidden in the device-tree. In the future, we might + * want to work around that by creating busses without a node + * but not for now + */ + child = of_get_next_child(np, NULL); + multibus = !child || strcmp(child->name, "i2c-bus"); + of_node_put(child); + + /* For a multibus setup, we get the bus count based on the + * parent type + */ + if (multibus) { + parent = of_get_parent(np); + if (parent == NULL) + continue; + chans = parent->name[0] == 'u' ? 2 : 1; + for (i = 0; i < chans; i++) + kw_i2c_add(host, np, np, i); + } else { + for (child = NULL; + (child = of_get_next_child(np, child)) != NULL;) { + u32 *reg = + (u32 *)get_property(child, "reg", NULL); + if (reg == NULL) + continue; + kw_i2c_add(host, np, child, *reg); + } + } + } +} + + /* * * PMU implementation * */ - #ifdef CONFIG_ADB_PMU -static int pmu_low_i2c_func(struct low_i2c_host *host, u8 addr, u8 sub, u8 *data, int len) +/* + * i2c command block to the PMU + */ +struct pmu_i2c_hdr { + u8 bus; + u8 mode; + u8 bus2; + u8 address; + u8 sub_addr; + u8 comb_addr; + u8 count; + u8 data[]; +}; + +static void pmu_i2c_complete(struct adb_request *req) { - // TODO - return -ENODEV; + complete(req->arg); } -static void pmu_low_i2c_add(struct device_node *np) +static int pmu_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize, + u32 subaddr, u8 *data, int len) { - struct low_i2c_host *host = find_low_i2c_host(NULL); + struct adb_request *req = bus->hostdata; + struct pmu_i2c_hdr *hdr = (struct pmu_i2c_hdr *)&req->data[1]; + struct completion comp; + int read = addrdir & 1; + int retry; + int rc = 0; - if (host == NULL) { - printk(KERN_ERR "low_i2c: Can't allocate host for %s\n", - np->full_name); - return; + /* For now, limit ourselves to 16 bytes transfers */ + if (len > 16) + return -EINVAL; + + init_completion(&comp); + + for (retry = 0; retry < 16; retry++) { + memset(req, 0, sizeof(struct adb_request)); + hdr->bus = bus->channel; + hdr->count = len; + + switch(bus->mode) { + case pmac_i2c_mode_std: + if (subsize != 0) + return -EINVAL; + hdr->address = addrdir; + hdr->mode = PMU_I2C_MODE_SIMPLE; + break; + case pmac_i2c_mode_stdsub: + case pmac_i2c_mode_combined: + if (subsize != 1) + return -EINVAL; + hdr->address = addrdir & 0xfe; + hdr->comb_addr = addrdir; + hdr->sub_addr = subaddr; + if (bus->mode == pmac_i2c_mode_stdsub) + hdr->mode = PMU_I2C_MODE_STDSUB; + else + hdr->mode = PMU_I2C_MODE_COMBINED; + break; + default: + return -EINVAL; + } + + INIT_COMPLETION(comp); + req->data[0] = PMU_I2C_CMD; + req->reply[0] = 0xff; + req->nbytes = sizeof(struct pmu_i2c_hdr) + 1; + req->done = pmu_i2c_complete; + req->arg = ∁ + if (!read && len) { + memcpy(hdr->data, data, len); + req->nbytes += len; + } + rc = pmu_queue_request(req); + if (rc) + return rc; + wait_for_completion(&comp); + if (req->reply[0] == PMU_I2C_STATUS_OK) + break; + msleep(15); } - memset(host, 0, sizeof(*host)); + if (req->reply[0] != PMU_I2C_STATUS_OK) + return -EIO; - init_MUTEX(&host->mutex); - host->np = of_node_get(np); - host->num_channels = 3; - host->mode = pmac_low_i2c_mode_std; - host->func = pmu_low_i2c_func; + for (retry = 0; retry < 16; retry++) { + memset(req, 0, sizeof(struct adb_request)); + + /* I know that looks like a lot, slow as hell, but darwin + * does it so let's be on the safe side for now + */ + msleep(15); + + hdr->bus = PMU_I2C_BUS_STATUS; + + INIT_COMPLETION(comp); + req->data[0] = PMU_I2C_CMD; + req->reply[0] = 0xff; + req->nbytes = 2; + req->done = pmu_i2c_complete; + req->arg = ∁ + rc = pmu_queue_request(req); + if (rc) + return rc; + wait_for_completion(&comp); + + if (req->reply[0] == PMU_I2C_STATUS_OK && !read) + return 0; + if (req->reply[0] == PMU_I2C_STATUS_DATAREAD && read) { + int rlen = req->reply_len - 1; + + if (rlen != len) { + printk(KERN_WARNING "low_i2c: PMU returned %d" + " bytes, expected %d !\n", rlen, len); + return -EIO; + } + if (len) + memcpy(data, &req->reply[1], len); + return 0; + } + } + return -EIO; +} + +static void __init pmu_i2c_probe(void) +{ + struct pmac_i2c_bus *bus; + struct device_node *busnode; + int channel, sz; + + if (!pmu_present()) + return; + + /* There might or might not be a "pmu-i2c" node, we use that + * or via-pmu itself, whatever we find. I haven't seen a machine + * with separate bus nodes, so we assume a multibus setup + */ + busnode = of_find_node_by_name(NULL, "pmu-i2c"); + if (busnode == NULL) + busnode = of_find_node_by_name(NULL, "via-pmu"); + if (busnode == NULL) + return; + + printk(KERN_INFO "PMU i2c %s\n", busnode->full_name); + + /* + * We add bus 1 and 2 only for now, bus 0 is "special" + */ + for (channel = 1; channel <= 2; channel++) { + sz = sizeof(struct pmac_i2c_bus) + sizeof(struct adb_request); + bus = kzalloc(sz, GFP_KERNEL); + if (bus == NULL) + return; + + bus->controller = busnode; + bus->busnode = busnode; + bus->type = pmac_i2c_bus_pmu; + bus->channel = channel; + bus->mode = pmac_i2c_mode_std; + bus->hostdata = bus + 1; + bus->xfer = pmu_i2c_xfer; + init_MUTEX(&bus->sem); + bus->flags = pmac_i2c_multibus; + list_add(&bus->link, &pmac_i2c_busses); + + printk(KERN_INFO " channel %d bus <multibus>\n", channel); + } } #endif /* CONFIG_ADB_PMU */ -void __init pmac_init_low_i2c(void) + +/* + * + * SMU implementation + * + */ + +#ifdef CONFIG_PMAC_SMU + +static void smu_i2c_complete(struct smu_i2c_cmd *cmd, void *misc) { - struct device_node *np; + complete(misc); +} - /* Probe keywest-i2c busses */ - np = of_find_compatible_node(NULL, "i2c", "keywest-i2c"); - while(np) { - keywest_low_i2c_add(np); - np = of_find_compatible_node(np, "i2c", "keywest-i2c"); +static int smu_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize, + u32 subaddr, u8 *data, int len) +{ + struct smu_i2c_cmd *cmd = bus->hostdata; + struct completion comp; + int read = addrdir & 1; + int rc = 0; + + if ((read && len > SMU_I2C_READ_MAX) || + ((!read) && len > SMU_I2C_WRITE_MAX)) + return -EINVAL; + + memset(cmd, 0, sizeof(struct smu_i2c_cmd)); + cmd->info.bus = bus->channel; + cmd->info.devaddr = addrdir; + cmd->info.datalen = len; + + switch(bus->mode) { + case pmac_i2c_mode_std: + if (subsize != 0) + return -EINVAL; + cmd->info.type = SMU_I2C_TRANSFER_SIMPLE; + break; + case pmac_i2c_mode_stdsub: + case pmac_i2c_mode_combined: + if (subsize > 3 || subsize < 1) + return -EINVAL; + cmd->info.sublen = subsize; + /* that's big-endian only but heh ! */ + memcpy(&cmd->info.subaddr, ((char *)&subaddr) + (4 - subsize), + subsize); + if (bus->mode == pmac_i2c_mode_stdsub) + cmd->info.type = SMU_I2C_TRANSFER_STDSUB; + else + cmd->info.type = SMU_I2C_TRANSFER_COMBINED; + break; + default: + return -EINVAL; } + if (!read && len) + memcpy(cmd->info.data, data, len); + + init_completion(&comp); + cmd->done = smu_i2c_complete; + cmd->misc = ∁ + rc = smu_queue_i2c(cmd); + if (rc < 0) + return rc; + wait_for_completion(&comp); + rc = cmd->status; + + if (read && len) + memcpy(data, cmd->info.data, len); + return rc < 0 ? rc : 0; +} + +static void __init smu_i2c_probe(void) +{ + struct device_node *controller, *busnode; + struct pmac_i2c_bus *bus; + u32 *reg; + int sz; + + if (!smu_present()) + return; + + controller = of_find_node_by_name(NULL, "smu-i2c-control"); + if (controller == NULL) + controller = of_find_node_by_name(NULL, "smu"); + if (controller == NULL) + return; + + printk(KERN_INFO "SMU i2c %s\n", controller->full_name); + + /* Look for childs, note that they might not be of the right + * type as older device trees mix i2c busses and other thigns + * at the same level + */ + for (busnode = NULL; + (busnode = of_get_next_child(controller, busnode)) != NULL;) { + if (strcmp(busnode->type, "i2c") && + strcmp(busnode->type, "i2c-bus")) + continue; + reg = (u32 *)get_property(busnode, "reg", NULL); + if (reg == NULL) + continue; + + sz = sizeof(struct pmac_i2c_bus) + sizeof(struct smu_i2c_cmd); + bus = kzalloc(sz, GFP_KERNEL); + if (bus == NULL) + return; + + bus->controller = controller; + bus->busnode = of_node_get(busnode); + bus->type = pmac_i2c_bus_smu; + bus->channel = *reg; + bus->mode = pmac_i2c_mode_std; + bus->hostdata = bus + 1; + bus->xfer = smu_i2c_xfer; + init_MUTEX(&bus->sem); + bus->flags = 0; + list_add(&bus->link, &pmac_i2c_busses); + + printk(KERN_INFO " channel %x bus %s\n", + bus->channel, busnode->full_name); + } +} + +#endif /* CONFIG_PMAC_SMU */ + +/* + * + * Core code + * + */ -#ifdef CONFIG_ADB_PMU - /* Probe PMU busses */ - np = of_find_node_by_name(NULL, "via-pmu"); - if (np) - pmu_low_i2c_add(np); -#endif /* CONFIG_ADB_PMU */ - /* TODO: Add CUDA support as well */ +struct pmac_i2c_bus *pmac_i2c_find_bus(struct device_node *node) +{ + struct device_node *p = of_node_get(node); + struct device_node *prev = NULL; + struct pmac_i2c_bus *bus; + + while(p) { + list_for_each_entry(bus, &pmac_i2c_busses, link) { + if (p == bus->busnode) { + if (prev && bus->flags & pmac_i2c_multibus) { + u32 *reg; + reg = (u32 *)get_property(prev, "reg", + NULL); + if (!reg) + continue; + if (((*reg) >> 8) != bus->channel) + continue; + } + of_node_put(p); + of_node_put(prev); + return bus; + } + } + of_node_put(prev); + prev = p; + p = of_get_parent(p); + } + return NULL; } +EXPORT_SYMBOL_GPL(pmac_i2c_find_bus); + +u8 pmac_i2c_get_dev_addr(struct device_node *device) +{ + u32 *reg = (u32 *)get_property(device, "reg", NULL); + + if (reg == NULL) + return 0; + + return (*reg) & 0xff; +} +EXPORT_SYMBOL_GPL(pmac_i2c_get_dev_addr); + +struct device_node *pmac_i2c_get_controller(struct pmac_i2c_bus *bus) +{ + return bus->controller; +} +EXPORT_SYMBOL_GPL(pmac_i2c_get_controller); + +struct device_node *pmac_i2c_get_bus_node(struct pmac_i2c_bus *bus) +{ + return bus->busnode; +} +EXPORT_SYMBOL_GPL(pmac_i2c_get_bus_node); + +int pmac_i2c_get_type(struct pmac_i2c_bus *bus) +{ + return bus->type; +} +EXPORT_SYMBOL_GPL(pmac_i2c_get_type); + +int pmac_i2c_get_flags(struct pmac_i2c_bus *bus) +{ + return bus->flags; +} +EXPORT_SYMBOL_GPL(pmac_i2c_get_flags); + +int pmac_i2c_get_channel(struct pmac_i2c_bus *bus) +{ + return bus->channel; +} +EXPORT_SYMBOL_GPL(pmac_i2c_get_channel); + + +void pmac_i2c_attach_adapter(struct pmac_i2c_bus *bus, + struct i2c_adapter *adapter) +{ + WARN_ON(bus->adapter != NULL); + bus->adapter = adapter; +} +EXPORT_SYMBOL_GPL(pmac_i2c_attach_adapter); + +void pmac_i2c_detach_adapter(struct pmac_i2c_bus *bus, + struct i2c_adapter *adapter) +{ + WARN_ON(bus->adapter != adapter); + bus->adapter = NULL; +} +EXPORT_SYMBOL_GPL(pmac_i2c_detach_adapter); + +struct i2c_adapter *pmac_i2c_get_adapter(struct pmac_i2c_bus *bus) +{ + return bus->adapter; +} +EXPORT_SYMBOL_GPL(pmac_i2c_get_adapter); + +struct pmac_i2c_bus *pmac_i2c_adapter_to_bus(struct i2c_adapter *adapter) +{ + struct pmac_i2c_bus *bus; + + list_for_each_entry(bus, &pmac_i2c_busses, link) + if (bus->adapter == adapter) + return bus; + return NULL; +} +EXPORT_SYMBOL_GPL(pmac_i2c_adapter_to_bus); + +extern int pmac_i2c_match_adapter(struct device_node *dev, + struct i2c_adapter *adapter) +{ + struct pmac_i2c_bus *bus = pmac_i2c_find_bus(dev); + + if (bus == NULL) + return 0; + return (bus->adapter == adapter); +} +EXPORT_SYMBOL_GPL(pmac_i2c_match_adapter); int pmac_low_i2c_lock(struct device_node *np) { - struct low_i2c_host *host = find_low_i2c_host(np); + struct pmac_i2c_bus *bus, *found = NULL; - if (!host) + list_for_each_entry(bus, &pmac_i2c_busses, link) { + if (np == bus->controller) { + found = bus; + break; + } + } + if (!found) return -ENODEV; - down(&host->mutex); - return 0; + return pmac_i2c_open(bus, 0); } -EXPORT_SYMBOL(pmac_low_i2c_lock); +EXPORT_SYMBOL_GPL(pmac_low_i2c_lock); int pmac_low_i2c_unlock(struct device_node *np) { - struct low_i2c_host *host = find_low_i2c_host(np); + struct pmac_i2c_bus *bus, *found = NULL; - if (!host) + list_for_each_entry(bus, &pmac_i2c_busses, link) { + if (np == bus->controller) { + found = bus; + break; + } + } + if (!found) return -ENODEV; - up(&host->mutex); + pmac_i2c_close(bus); return 0; } -EXPORT_SYMBOL(pmac_low_i2c_unlock); +EXPORT_SYMBOL_GPL(pmac_low_i2c_unlock); -int pmac_low_i2c_open(struct device_node *np, int channel) +int pmac_i2c_open(struct pmac_i2c_bus *bus, int polled) { - struct low_i2c_host *host = find_low_i2c_host(np); + int rc; + + down(&bus->sem); + bus->polled = polled || pmac_i2c_force_poll; + bus->opened = 1; + bus->mode = pmac_i2c_mode_std; + if (bus->open && (rc = bus->open(bus)) != 0) { + bus->opened = 0; + up(&bus->sem); + return rc; + } + return 0; +} +EXPORT_SYMBOL_GPL(pmac_i2c_open); - if (!host) - return -ENODEV; +void pmac_i2c_close(struct pmac_i2c_bus *bus) +{ + WARN_ON(!bus->opened); + if (bus->close) + bus->close(bus); + bus->opened = 0; + up(&bus->sem); +} +EXPORT_SYMBOL_GPL(pmac_i2c_close); - if (channel >= host->num_channels) +int pmac_i2c_setmode(struct pmac_i2c_bus *bus, int mode) +{ + WARN_ON(!bus->opened); + + /* Report me if you see the error below as there might be a new + * "combined4" mode that I need to implement for the SMU bus + */ + if (mode < pmac_i2c_mode_dumb || mode > pmac_i2c_mode_combined) { + printk(KERN_ERR "low_i2c: Invalid mode %d requested on" + " bus %s !\n", mode, bus->busnode->full_name); return -EINVAL; - - down(&host->mutex); - host->is_open = 1; - host->channel = channel; + } + bus->mode = mode; return 0; } -EXPORT_SYMBOL(pmac_low_i2c_open); +EXPORT_SYMBOL_GPL(pmac_i2c_setmode); -int pmac_low_i2c_close(struct device_node *np) +int pmac_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize, + u32 subaddr, u8 *data, int len) { - struct low_i2c_host *host = find_low_i2c_host(np); + int rc; - if (!host) - return -ENODEV; + WARN_ON(!bus->opened); - host->is_open = 0; - up(&host->mutex); + DBG("xfer() chan=%d, addrdir=0x%x, mode=%d, subsize=%d, subaddr=0x%x," + " %d bytes, bus %s\n", bus->channel, addrdir, bus->mode, subsize, + subaddr, len, bus->busnode->full_name); - return 0; + rc = bus->xfer(bus, addrdir, subsize, subaddr, data, len); + +#ifdef DEBUG + if (rc) + DBG("xfer error %d\n", rc); +#endif + return rc; } -EXPORT_SYMBOL(pmac_low_i2c_close); +EXPORT_SYMBOL_GPL(pmac_i2c_xfer); + +/* some quirks for platform function decoding */ +enum { + pmac_i2c_quirk_invmask = 0x00000001u, +}; -int pmac_low_i2c_setmode(struct device_node *np, int mode) +static void pmac_i2c_devscan(void (*callback)(struct device_node *dev, + int quirks)) { - struct low_i2c_host *host = find_low_i2c_host(np); + struct pmac_i2c_bus *bus; + struct device_node *np; + static struct whitelist_ent { + char *name; + char *compatible; + int quirks; + } whitelist[] = { + /* XXX Study device-tree's & apple drivers are get the quirks + * right ! + */ + { "i2c-hwclock", NULL, pmac_i2c_quirk_invmask }, + { "i2c-cpu-voltage", NULL, 0}, + { "temp-monitor", NULL, 0 }, + { "supply-monitor", NULL, 0 }, + { NULL, NULL, 0 }, + }; + + /* Only some devices need to have platform functions instanciated + * here. For now, we have a table. Others, like 9554 i2c GPIOs used + * on Xserve, if we ever do a driver for them, will use their own + * platform function instance + */ + list_for_each_entry(bus, &pmac_i2c_busses, link) { + for (np = NULL; + (np = of_get_next_child(bus->busnode, np)) != NULL;) { + struct whitelist_ent *p; + /* If multibus, check if device is on that bus */ + if (bus->flags & pmac_i2c_multibus) + if (bus != pmac_i2c_find_bus(np)) + continue; + for (p = whitelist; p->name != NULL; p++) { + if (strcmp(np->name, p->name)) + continue; + if (p->compatible && + !device_is_compatible(np, p->compatible)) + continue; + callback(np, p->quirks); + break; + } + } + } +} - if (!host) - return -ENODEV; - WARN_ON(!host->is_open); - host->mode = mode; +#define MAX_I2C_DATA 64 + +struct pmac_i2c_pf_inst +{ + struct pmac_i2c_bus *bus; + u8 addr; + u8 buffer[MAX_I2C_DATA]; + u8 scratch[MAX_I2C_DATA]; + int bytes; + int quirks; +}; + +static void* pmac_i2c_do_begin(struct pmf_function *func, struct pmf_args *args) +{ + struct pmac_i2c_pf_inst *inst; + struct pmac_i2c_bus *bus; + + bus = pmac_i2c_find_bus(func->node); + if (bus == NULL) { + printk(KERN_ERR "low_i2c: Can't find bus for %s (pfunc)\n", + func->node->full_name); + return NULL; + } + if (pmac_i2c_open(bus, 0)) { + printk(KERN_ERR "low_i2c: Can't open i2c bus for %s (pfunc)\n", + func->node->full_name); + return NULL; + } + + /* XXX might need GFP_ATOMIC when called during the suspend process, + * but then, there are already lots of issues with suspending when + * near OOM that need to be resolved, the allocator itself should + * probably make GFP_NOIO implicit during suspend + */ + inst = kzalloc(sizeof(struct pmac_i2c_pf_inst), GFP_KERNEL); + if (inst == NULL) { + pmac_i2c_close(bus); + return NULL; + } + inst->bus = bus; + inst->addr = pmac_i2c_get_dev_addr(func->node); + inst->quirks = (int)(long)func->driver_data; + return inst; +} + +static void pmac_i2c_do_end(struct pmf_function *func, void *instdata) +{ + struct pmac_i2c_pf_inst *inst = instdata; + + if (inst == NULL) + return; + pmac_i2c_close(inst->bus); + if (inst) + kfree(inst); +} + +static int pmac_i2c_do_read(PMF_STD_ARGS, u32 len) +{ + struct pmac_i2c_pf_inst *inst = instdata; + + inst->bytes = len; + return pmac_i2c_xfer(inst->bus, inst->addr | pmac_i2c_read, 0, 0, + inst->buffer, len); +} + +static int pmac_i2c_do_write(PMF_STD_ARGS, u32 len, const u8 *data) +{ + struct pmac_i2c_pf_inst *inst = instdata; + + return pmac_i2c_xfer(inst->bus, inst->addr | pmac_i2c_write, 0, 0, + (u8 *)data, len); +} + +/* This function is used to do the masking & OR'ing for the "rmw" type + * callbacks. Ze should apply the mask and OR in the values in the + * buffer before writing back. The problem is that it seems that + * various darwin drivers implement the mask/or differently, thus + * we need to check the quirks first + */ +static void pmac_i2c_do_apply_rmw(struct pmac_i2c_pf_inst *inst, + u32 len, const u8 *mask, const u8 *val) +{ + int i; + + if (inst->quirks & pmac_i2c_quirk_invmask) { + for (i = 0; i < len; i ++) + inst->scratch[i] = (inst->buffer[i] & mask[i]) | val[i]; + } else { + for (i = 0; i < len; i ++) + inst->scratch[i] = (inst->buffer[i] & ~mask[i]) + | (val[i] & mask[i]); + } +} + +static int pmac_i2c_do_rmw(PMF_STD_ARGS, u32 masklen, u32 valuelen, + u32 totallen, const u8 *maskdata, + const u8 *valuedata) +{ + struct pmac_i2c_pf_inst *inst = instdata; + + if (masklen > inst->bytes || valuelen > inst->bytes || + totallen > inst->bytes || valuelen > masklen) + return -EINVAL; + + pmac_i2c_do_apply_rmw(inst, masklen, maskdata, valuedata); + + return pmac_i2c_xfer(inst->bus, inst->addr | pmac_i2c_write, 0, 0, + inst->scratch, totallen); +} + +static int pmac_i2c_do_read_sub(PMF_STD_ARGS, u8 subaddr, u32 len) +{ + struct pmac_i2c_pf_inst *inst = instdata; + + inst->bytes = len; + return pmac_i2c_xfer(inst->bus, inst->addr | pmac_i2c_read, 1, subaddr, + inst->buffer, len); +} + +static int pmac_i2c_do_write_sub(PMF_STD_ARGS, u8 subaddr, u32 len, + const u8 *data) +{ + struct pmac_i2c_pf_inst *inst = instdata; + + return pmac_i2c_xfer(inst->bus, inst->addr | pmac_i2c_write, 1, + subaddr, (u8 *)data, len); +} +static int pmac_i2c_do_set_mode(PMF_STD_ARGS, int mode) +{ + struct pmac_i2c_pf_inst *inst = instdata; + + return pmac_i2c_setmode(inst->bus, mode); +} + +static int pmac_i2c_do_rmw_sub(PMF_STD_ARGS, u8 subaddr, u32 masklen, + u32 valuelen, u32 totallen, const u8 *maskdata, + const u8 *valuedata) +{ + struct pmac_i2c_pf_inst *inst = instdata; + + if (masklen > inst->bytes || valuelen > inst->bytes || + totallen > inst->bytes || valuelen > masklen) + return -EINVAL; + + pmac_i2c_do_apply_rmw(inst, masklen, maskdata, valuedata); + + return pmac_i2c_xfer(inst->bus, inst->addr | pmac_i2c_write, 1, + subaddr, inst->scratch, totallen); +} + +static int pmac_i2c_do_mask_and_comp(PMF_STD_ARGS, u32 len, + const u8 *maskdata, + const u8 *valuedata) +{ + struct pmac_i2c_pf_inst *inst = instdata; + int i, match; + + /* Get return value pointer, it's assumed to be a u32 */ + if (!args || !args->count || !args->u[0].p) + return -EINVAL; + + /* Check buffer */ + if (len > inst->bytes) + return -EINVAL; + + for (i = 0, match = 1; match && i < len; i ++) + if ((inst->buffer[i] & maskdata[i]) != valuedata[i]) + match = 0; + *args->u[0].p = match; return 0; } -EXPORT_SYMBOL(pmac_low_i2c_setmode); -int pmac_low_i2c_xfer(struct device_node *np, u8 addrdir, u8 subaddr, u8 *data, int len) +static int pmac_i2c_do_delay(PMF_STD_ARGS, u32 duration) { - struct low_i2c_host *host = find_low_i2c_host(np); + msleep((duration + 999) / 1000); + return 0; +} - if (!host) - return -ENODEV; - WARN_ON(!host->is_open); - return host->func(host, addrdir, subaddr, data, len); +static struct pmf_handlers pmac_i2c_pfunc_handlers = { + .begin = pmac_i2c_do_begin, + .end = pmac_i2c_do_end, + .read_i2c = pmac_i2c_do_read, + .write_i2c = pmac_i2c_do_write, + .rmw_i2c = pmac_i2c_do_rmw, + .read_i2c_sub = pmac_i2c_do_read_sub, + .write_i2c_sub = pmac_i2c_do_write_sub, + .rmw_i2c_sub = pmac_i2c_do_rmw_sub, + .set_i2c_mode = pmac_i2c_do_set_mode, + .mask_and_compare = pmac_i2c_do_mask_and_comp, + .delay = pmac_i2c_do_delay, +}; + +static void __init pmac_i2c_dev_create(struct device_node *np, int quirks) +{ + DBG("dev_create(%s)\n", np->full_name); + + pmf_register_driver(np, &pmac_i2c_pfunc_handlers, + (void *)(long)quirks); +} + +static void __init pmac_i2c_dev_init(struct device_node *np, int quirks) +{ + DBG("dev_create(%s)\n", np->full_name); + + pmf_do_functions(np, NULL, 0, PMF_FLAGS_ON_INIT, NULL); +} + +static void pmac_i2c_dev_suspend(struct device_node *np, int quirks) +{ + DBG("dev_suspend(%s)\n", np->full_name); + pmf_do_functions(np, NULL, 0, PMF_FLAGS_ON_SLEEP, NULL); +} + +static void pmac_i2c_dev_resume(struct device_node *np, int quirks) +{ + DBG("dev_resume(%s)\n", np->full_name); + pmf_do_functions(np, NULL, 0, PMF_FLAGS_ON_WAKE, NULL); +} + +void pmac_pfunc_i2c_suspend(void) +{ + pmac_i2c_devscan(pmac_i2c_dev_suspend); +} + +void pmac_pfunc_i2c_resume(void) +{ + pmac_i2c_devscan(pmac_i2c_dev_resume); +} + +/* + * Initialize us: probe all i2c busses on the machine, instantiate + * busses and platform functions as needed. + */ +/* This is non-static as it might be called early by smp code */ +int __init pmac_i2c_init(void) +{ + static int i2c_inited; + + if (i2c_inited) + return 0; + i2c_inited = 1; + + /* Probe keywest-i2c busses */ + kw_i2c_probe(); + +#ifdef CONFIG_ADB_PMU + /* Probe PMU i2c busses */ + pmu_i2c_probe(); +#endif + +#ifdef CONFIG_PMAC_SMU + /* Probe SMU i2c busses */ + smu_i2c_probe(); +#endif + + /* Now add plaform functions for some known devices */ + pmac_i2c_devscan(pmac_i2c_dev_create); + + return 0; } -EXPORT_SYMBOL(pmac_low_i2c_xfer); +arch_initcall(pmac_i2c_init); + +/* Since pmac_i2c_init can be called too early for the platform device + * registration, we need to do it at a later time. In our case, subsys + * happens to fit well, though I agree it's a bit of a hack... + */ +static int __init pmac_i2c_create_platform_devices(void) +{ + struct pmac_i2c_bus *bus; + int i = 0; + + /* In the case where we are initialized from smp_init(), we must + * not use the timer (and thus the irq). It's safe from now on + * though + */ + pmac_i2c_force_poll = 0; + + /* Create platform devices */ + list_for_each_entry(bus, &pmac_i2c_busses, link) { + bus->platform_dev = + platform_device_alloc("i2c-powermac", i++); + if (bus->platform_dev == NULL) + return -ENOMEM; + bus->platform_dev->dev.platform_data = bus; + platform_device_add(bus->platform_dev); + } + + /* Now call platform "init" functions */ + pmac_i2c_devscan(pmac_i2c_dev_init); + return 0; +} +subsys_initcall(pmac_i2c_create_platform_devices); diff --git a/arch/powerpc/platforms/powermac/nvram.c b/arch/powerpc/platforms/powermac/nvram.c index 4042e2f..3ebd045 100644 --- a/arch/powerpc/platforms/powermac/nvram.c +++ b/arch/powerpc/platforms/powermac/nvram.c @@ -514,7 +514,7 @@ static void core99_nvram_sync(void) #endif } -static int __init core99_nvram_setup(struct device_node *dp) +static int __init core99_nvram_setup(struct device_node *dp, unsigned long addr) { int i; u32 gen_bank0, gen_bank1; @@ -528,7 +528,7 @@ static int __init core99_nvram_setup(struct device_node *dp) printk(KERN_ERR "nvram: can't allocate ram image\n"); return -ENOMEM; } - nvram_data = ioremap(dp->addrs[0].address, NVRAM_SIZE*2); + nvram_data = ioremap(addr, NVRAM_SIZE*2); nvram_naddrs = 1; /* Make sure we get the correct case */ DBG("nvram: Checking bank 0...\n"); @@ -549,6 +549,7 @@ static int __init core99_nvram_setup(struct device_node *dp) ppc_md.nvram_write = core99_nvram_write; ppc_md.nvram_size = core99_nvram_size; ppc_md.nvram_sync = core99_nvram_sync; + ppc_md.machine_shutdown = core99_nvram_sync; /* * Maybe we could be smarter here though making an exclusive list * of known flash chips is a bit nasty as older OF didn't provide us @@ -569,34 +570,48 @@ static int __init core99_nvram_setup(struct device_node *dp) int __init pmac_nvram_init(void) { struct device_node *dp; + struct resource r1, r2; + unsigned int s1 = 0, s2 = 0; int err = 0; nvram_naddrs = 0; - dp = find_devices("nvram"); + dp = of_find_node_by_name(NULL, "nvram"); if (dp == NULL) { printk(KERN_ERR "Can't find NVRAM device\n"); return -ENODEV; } - nvram_naddrs = dp->n_addrs; + + /* Try to obtain an address */ + if (of_address_to_resource(dp, 0, &r1) == 0) { + nvram_naddrs = 1; + s1 = (r1.end - r1.start) + 1; + if (of_address_to_resource(dp, 1, &r2) == 0) { + nvram_naddrs = 2; + s2 = (r2.end - r2.start) + 1; + } + } + is_core_99 = device_is_compatible(dp, "nvram,flash"); - if (is_core_99) - err = core99_nvram_setup(dp); + if (is_core_99) { + err = core99_nvram_setup(dp, r1.start); + goto bail; + } + #ifdef CONFIG_PPC32 - else if (_machine == _MACH_chrp && nvram_naddrs == 1) { - nvram_data = ioremap(dp->addrs[0].address + isa_mem_base, - dp->addrs[0].size); + if (_machine == _MACH_chrp && nvram_naddrs == 1) { + nvram_data = ioremap(r1.start, s1); nvram_mult = 1; ppc_md.nvram_read_val = direct_nvram_read_byte; ppc_md.nvram_write_val = direct_nvram_write_byte; } else if (nvram_naddrs == 1) { - nvram_data = ioremap(dp->addrs[0].address, dp->addrs[0].size); - nvram_mult = (dp->addrs[0].size + NVRAM_SIZE - 1) / NVRAM_SIZE; + nvram_data = ioremap(r1.start, s1); + nvram_mult = (s1 + NVRAM_SIZE - 1) / NVRAM_SIZE; ppc_md.nvram_read_val = direct_nvram_read_byte; ppc_md.nvram_write_val = direct_nvram_write_byte; } else if (nvram_naddrs == 2) { - nvram_addr = ioremap(dp->addrs[0].address, dp->addrs[0].size); - nvram_data = ioremap(dp->addrs[1].address, dp->addrs[1].size); + nvram_addr = ioremap(r1.start, s1); + nvram_data = ioremap(r2.start, s2); ppc_md.nvram_read_val = indirect_nvram_read_byte; ppc_md.nvram_write_val = indirect_nvram_write_byte; } else if (nvram_naddrs == 0 && sys_ctrler == SYS_CTRLER_PMU) { @@ -605,13 +620,15 @@ int __init pmac_nvram_init(void) ppc_md.nvram_read_val = pmu_nvram_read_byte; ppc_md.nvram_write_val = pmu_nvram_write_byte; #endif /* CONFIG_ADB_PMU */ - } -#endif - else { + } else { printk(KERN_ERR "Incompatible type of NVRAM\n"); - return -ENXIO; + err = -ENXIO; } - lookup_partitions(); +#endif /* CONFIG_PPC32 */ +bail: + of_node_put(dp); + if (err == 0) + lookup_partitions(); return err; } diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c index 443be52..f671ed2 100644 --- a/arch/powerpc/platforms/powermac/pci.c +++ b/arch/powerpc/platforms/powermac/pci.c @@ -1,7 +1,7 @@ /* * Support for PCI bridges found on Power Macintoshes. * - * Copyright (C) 2003 Benjamin Herrenschmuidt (benh@kernel.crashing.org) + * Copyright (C) 2003-2005 Benjamin Herrenschmuidt (benh@kernel.crashing.org) * Copyright (C) 1997 Paul Mackerras (paulus@samba.org) * * This program is free software; you can redistribute it and/or @@ -25,7 +25,7 @@ #include <asm/pmac_feature.h> #include <asm/grackle.h> #ifdef CONFIG_PPC64 -#include <asm/iommu.h> +//#include <asm/iommu.h> #include <asm/ppc-pci.h> #endif @@ -44,6 +44,7 @@ static int add_bridge(struct device_node *dev); static int has_uninorth; #ifdef CONFIG_PPC64 static struct pci_controller *u3_agp; +static struct pci_controller *u4_pcie; static struct pci_controller *u3_ht; #endif /* CONFIG_PPC64 */ @@ -97,11 +98,8 @@ static void __init fixup_bus_range(struct device_node *bridge) /* Lookup the "bus-range" property for the hose */ bus_range = (int *) get_property(bridge, "bus-range", &len); - if (bus_range == NULL || len < 2 * sizeof(int)) { - printk(KERN_WARNING "Can't get bus-range for %s\n", - bridge->full_name); + if (bus_range == NULL || len < 2 * sizeof(int)) return; - } bus_range[1] = fixup_one_level_bus_range(bridge->child, bus_range[1]); } @@ -128,14 +126,14 @@ static void __init fixup_bus_range(struct device_node *bridge) */ #define MACRISC_CFA0(devfn, off) \ - ((1 << (unsigned long)PCI_SLOT(dev_fn)) \ - | (((unsigned long)PCI_FUNC(dev_fn)) << 8) \ - | (((unsigned long)(off)) & 0xFCUL)) + ((1 << (unsigned int)PCI_SLOT(dev_fn)) \ + | (((unsigned int)PCI_FUNC(dev_fn)) << 8) \ + | (((unsigned int)(off)) & 0xFCUL)) #define MACRISC_CFA1(bus, devfn, off) \ - ((((unsigned long)(bus)) << 16) \ - |(((unsigned long)(devfn)) << 8) \ - |(((unsigned long)(off)) & 0xFCUL) \ + ((((unsigned int)(bus)) << 16) \ + |(((unsigned int)(devfn)) << 8) \ + |(((unsigned int)(off)) & 0xFCUL) \ |1UL) static unsigned long macrisc_cfg_access(struct pci_controller* hose, @@ -168,7 +166,8 @@ static int macrisc_read_config(struct pci_bus *bus, unsigned int devfn, hose = pci_bus_to_host(bus); if (hose == NULL) return PCIBIOS_DEVICE_NOT_FOUND; - + if (offset >= 0x100) + return PCIBIOS_BAD_REGISTER_NUMBER; addr = macrisc_cfg_access(hose, bus->number, devfn, offset); if (!addr) return PCIBIOS_DEVICE_NOT_FOUND; @@ -199,7 +198,8 @@ static int macrisc_write_config(struct pci_bus *bus, unsigned int devfn, hose = pci_bus_to_host(bus); if (hose == NULL) return PCIBIOS_DEVICE_NOT_FOUND; - + if (offset >= 0x100) + return PCIBIOS_BAD_REGISTER_NUMBER; addr = macrisc_cfg_access(hose, bus->number, devfn, offset); if (!addr) return PCIBIOS_DEVICE_NOT_FOUND; @@ -234,12 +234,13 @@ static struct pci_ops macrisc_pci_ops = /* * Verify that a specific (bus, dev_fn) exists on chaos */ -static int -chaos_validate_dev(struct pci_bus *bus, int devfn, int offset) +static int chaos_validate_dev(struct pci_bus *bus, int devfn, int offset) { struct device_node *np; u32 *vendor, *device; + if (offset >= 0x100) + return PCIBIOS_BAD_REGISTER_NUMBER; np = pci_busdev_to_OF_node(bus, devfn); if (np == NULL) return PCIBIOS_DEVICE_NOT_FOUND; @@ -285,15 +286,13 @@ static struct pci_ops chaos_pci_ops = }; static void __init setup_chaos(struct pci_controller *hose, - struct reg_property *addr) + struct resource *addr) { /* assume a `chaos' bridge */ hose->ops = &chaos_pci_ops; - hose->cfg_addr = ioremap(addr->address + 0x800000, 0x1000); - hose->cfg_data = ioremap(addr->address + 0xc00000, 0x1000); + hose->cfg_addr = ioremap(addr->start + 0x800000, 0x1000); + hose->cfg_data = ioremap(addr->start + 0xc00000, 0x1000); } -#else -#define setup_chaos(hose, addr) #endif /* CONFIG_PPC32 */ #ifdef CONFIG_PPC64 @@ -326,7 +325,7 @@ static int u3_ht_skip_device(struct pci_controller *hose, else busdn = hose->arch_data; for (dn = busdn->child; dn; dn = dn->sibling) - if (dn->data && PCI_DN(dn)->devfn == devfn) + if (PCI_DN(dn) && PCI_DN(dn)->devfn == devfn) break; if (dn == NULL) return -1; @@ -343,10 +342,10 @@ static int u3_ht_skip_device(struct pci_controller *hose, } #define U3_HT_CFA0(devfn, off) \ - ((((unsigned long)devfn) << 8) | offset) + ((((unsigned int)devfn) << 8) | offset) #define U3_HT_CFA1(bus, devfn, off) \ (U3_HT_CFA0(devfn, off) \ - + (((unsigned long)bus) << 16) \ + + (((unsigned int)bus) << 16) \ + 0x01000000UL) static unsigned long u3_ht_cfg_access(struct pci_controller* hose, @@ -356,9 +355,11 @@ static unsigned long u3_ht_cfg_access(struct pci_controller* hose, /* For now, we don't self probe U3 HT bridge */ if (PCI_SLOT(devfn) == 0) return 0; - return ((unsigned long)hose->cfg_data) + U3_HT_CFA0(devfn, offset); + return ((unsigned long)hose->cfg_data) + + U3_HT_CFA0(devfn, offset); } else - return ((unsigned long)hose->cfg_data) + U3_HT_CFA1(bus, devfn, offset); + return ((unsigned long)hose->cfg_data) + + U3_HT_CFA1(bus, devfn, offset); } static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn, @@ -370,7 +371,8 @@ static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn, hose = pci_bus_to_host(bus); if (hose == NULL) return PCIBIOS_DEVICE_NOT_FOUND; - + if (offset >= 0x100) + return PCIBIOS_BAD_REGISTER_NUMBER; addr = u3_ht_cfg_access(hose, bus->number, devfn, offset); if (!addr) return PCIBIOS_DEVICE_NOT_FOUND; @@ -419,7 +421,8 @@ static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn, hose = pci_bus_to_host(bus); if (hose == NULL) return PCIBIOS_DEVICE_NOT_FOUND; - + if (offset >= 0x100) + return PCIBIOS_BAD_REGISTER_NUMBER; addr = u3_ht_cfg_access(hose, bus->number, devfn, offset); if (!addr) return PCIBIOS_DEVICE_NOT_FOUND; @@ -459,6 +462,112 @@ static struct pci_ops u3_ht_pci_ops = u3_ht_read_config, u3_ht_write_config }; + +#define U4_PCIE_CFA0(devfn, off) \ + ((1 << ((unsigned int)PCI_SLOT(dev_fn))) \ + | (((unsigned int)PCI_FUNC(dev_fn)) << 8) \ + | ((((unsigned int)(off)) >> 8) << 28) \ + | (((unsigned int)(off)) & 0xfcU)) + +#define U4_PCIE_CFA1(bus, devfn, off) \ + ((((unsigned int)(bus)) << 16) \ + |(((unsigned int)(devfn)) << 8) \ + | ((((unsigned int)(off)) >> 8) << 28) \ + |(((unsigned int)(off)) & 0xfcU) \ + |1UL) + +static unsigned long u4_pcie_cfg_access(struct pci_controller* hose, + u8 bus, u8 dev_fn, int offset) +{ + unsigned int caddr; + + if (bus == hose->first_busno) { + caddr = U4_PCIE_CFA0(dev_fn, offset); + } else + caddr = U4_PCIE_CFA1(bus, dev_fn, offset); + + /* Uninorth will return garbage if we don't read back the value ! */ + do { + out_le32(hose->cfg_addr, caddr); + } while (in_le32(hose->cfg_addr) != caddr); + + offset &= 0x03; + return ((unsigned long)hose->cfg_data) + offset; +} + +static int u4_pcie_read_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 *val) +{ + struct pci_controller *hose; + unsigned long addr; + + hose = pci_bus_to_host(bus); + if (hose == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + if (offset >= 0x1000) + return PCIBIOS_BAD_REGISTER_NUMBER; + addr = u4_pcie_cfg_access(hose, bus->number, devfn, offset); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + switch (len) { + case 1: + *val = in_8((u8 *)addr); + break; + case 2: + *val = in_le16((u16 *)addr); + break; + default: + *val = in_le32((u32 *)addr); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static int u4_pcie_write_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 val) +{ + struct pci_controller *hose; + unsigned long addr; + + hose = pci_bus_to_host(bus); + if (hose == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + if (offset >= 0x1000) + return PCIBIOS_BAD_REGISTER_NUMBER; + addr = u4_pcie_cfg_access(hose, bus->number, devfn, offset); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + switch (len) { + case 1: + out_8((u8 *)addr, val); + (void) in_8((u8 *)addr); + break; + case 2: + out_le16((u16 *)addr, val); + (void) in_le16((u16 *)addr); + break; + default: + out_le32((u32 *)addr, val); + (void) in_le32((u32 *)addr); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops u4_pcie_pci_ops = +{ + u4_pcie_read_config, + u4_pcie_write_config +}; + #endif /* CONFIG_PPC64 */ #ifdef CONFIG_PPC32 @@ -532,7 +641,8 @@ static void __init init_p2pbridge(void) } if (early_read_config_word(hose, bus, devfn, PCI_BRIDGE_CONTROL, &val) < 0) { - printk(KERN_ERR "init_p2pbridge: couldn't read bridge control\n"); + printk(KERN_ERR "init_p2pbridge: couldn't read bridge" + " control\n"); return; } val &= ~PCI_BRIDGE_CTL_MASTER_ABORT; @@ -576,36 +686,38 @@ static void __init fixup_nec_usb2(void) continue; early_read_config_dword(hose, bus, devfn, 0xe4, &data); if (data & 1UL) { - printk("Found NEC PD720100A USB2 chip with disabled EHCI, fixing up...\n"); + printk("Found NEC PD720100A USB2 chip with disabled" + " EHCI, fixing up...\n"); data &= ~1UL; early_write_config_dword(hose, bus, devfn, 0xe4, data); - early_write_config_byte(hose, bus, devfn | 2, PCI_INTERRUPT_LINE, + early_write_config_byte(hose, bus, + devfn | 2, PCI_INTERRUPT_LINE, nec->intrs[0].line); } } } static void __init setup_bandit(struct pci_controller *hose, - struct reg_property *addr) + struct resource *addr) { hose->ops = ¯isc_pci_ops; - hose->cfg_addr = ioremap(addr->address + 0x800000, 0x1000); - hose->cfg_data = ioremap(addr->address + 0xc00000, 0x1000); + hose->cfg_addr = ioremap(addr->start + 0x800000, 0x1000); + hose->cfg_data = ioremap(addr->start + 0xc00000, 0x1000); init_bandit(hose); } static int __init setup_uninorth(struct pci_controller *hose, - struct reg_property *addr) + struct resource *addr) { pci_assign_all_buses = 1; has_uninorth = 1; hose->ops = ¯isc_pci_ops; - hose->cfg_addr = ioremap(addr->address + 0x800000, 0x1000); - hose->cfg_data = ioremap(addr->address + 0xc00000, 0x1000); + hose->cfg_addr = ioremap(addr->start + 0x800000, 0x1000); + hose->cfg_data = ioremap(addr->start + 0xc00000, 0x1000); /* We "know" that the bridge at f2000000 has the PCI slots. */ - return addr->address == 0xf2000000; + return addr->start == 0xf2000000; } -#endif +#endif /* CONFIG_PPC32 */ #ifdef CONFIG_PPC64 static void __init setup_u3_agp(struct pci_controller* hose) @@ -625,15 +737,36 @@ static void __init setup_u3_agp(struct pci_controller* hose) hose->ops = ¯isc_pci_ops; hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000); hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000); - u3_agp = hose; } +static void __init setup_u4_pcie(struct pci_controller* hose) +{ + /* We currently only implement the "non-atomic" config space, to + * be optimised later. + */ + hose->ops = &u4_pcie_pci_ops; + hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000); + hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000); + + /* The bus contains a bridge from root -> device, we need to + * make it visible on bus 0 so that we pick the right type + * of config cycles. If we didn't, we would have to force all + * config cycles to be type 1. So we override the "bus-range" + * property here + */ + hose->first_busno = 0x00; + hose->last_busno = 0xff; + u4_pcie = hose; +} + static void __init setup_u3_ht(struct pci_controller* hose) { struct device_node *np = (struct device_node *)hose->arch_data; + struct pci_controller *other = NULL; int i, cur; + hose->ops = &u3_ht_pci_ops; /* We hard code the address because of the different size of @@ -667,11 +800,20 @@ static void __init setup_u3_ht(struct pci_controller* hose) u3_ht = hose; - if (u3_agp == NULL) { - DBG("U3 has no AGP, using full resource range\n"); + if (u3_agp != NULL) + other = u3_agp; + else if (u4_pcie != NULL) + other = u4_pcie; + + if (other == NULL) { + DBG("U3/4 has no AGP/PCIE, using full resource range\n"); return; } + /* Fixup bus range vs. PCIE */ + if (u4_pcie) + hose->last_busno = u4_pcie->first_busno - 1; + /* We "remove" the AGP resources from the resources allocated to HT, * that is we create "holes". However, that code does assumptions * that so far happen to be true (cross fingers...), typically that @@ -679,7 +821,7 @@ static void __init setup_u3_ht(struct pci_controller* hose) */ cur = 0; for (i=0; i<3; i++) { - struct resource *res = &u3_agp->mem_resources[i]; + struct resource *res = &other->mem_resources[i]; if (res->flags != IORESOURCE_MEM) continue; /* We don't care about "fine" resources */ @@ -722,7 +864,7 @@ static void __init setup_u3_ht(struct pci_controller* hose) hose->mem_resources[cur-1].end = res->start - 1; } } -#endif +#endif /* CONFIG_PPC64 */ /* * We assume that if we have a G3 powermac, we have one bridge called @@ -733,24 +875,17 @@ static int __init add_bridge(struct device_node *dev) { int len; struct pci_controller *hose; -#ifdef CONFIG_PPC32 - struct reg_property *addr; -#endif + struct resource rsrc; char *disp_name; int *bus_range; - int primary = 1; + int primary = 1, has_address = 0; DBG("Adding PCI host bridge %s\n", dev->full_name); -#ifdef CONFIG_PPC32 - /* XXX fix this */ - addr = (struct reg_property *) get_property(dev, "reg", &len); - if (addr == NULL || len < sizeof(*addr)) { - printk(KERN_WARNING "Can't use %s: no address\n", - dev->full_name); - return -ENODEV; - } -#endif + /* Fetch host bridge registers address */ + has_address = (of_address_to_resource(dev, 0, &rsrc) == 0); + + /* Get bus range if any */ bus_range = (int *) get_property(dev, "bus-range", &len); if (bus_range == NULL || len < 2 * sizeof(int)) { printk(KERN_WARNING "Can't get bus-range for %s, assume" @@ -770,6 +905,8 @@ static int __init add_bridge(struct device_node *dev) hose->last_busno = bus_range ? bus_range[1] : 0xff; disp_name = NULL; + + /* 64 bits only bridges */ #ifdef CONFIG_PPC64 if (device_is_compatible(dev, "u3-agp")) { setup_u3_agp(hose); @@ -779,28 +916,37 @@ static int __init add_bridge(struct device_node *dev) setup_u3_ht(hose); disp_name = "U3-HT"; primary = 1; + } else if (device_is_compatible(dev, "u4-pcie")) { + setup_u4_pcie(hose); + disp_name = "U4-PCIE"; + primary = 0; } - printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number: %d->%d\n", - disp_name, hose->first_busno, hose->last_busno); -#else + printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number:" + " %d->%d\n", disp_name, hose->first_busno, hose->last_busno); +#endif /* CONFIG_PPC64 */ + + /* 32 bits only bridges */ +#ifdef CONFIG_PPC32 if (device_is_compatible(dev, "uni-north")) { - primary = setup_uninorth(hose, addr); + primary = setup_uninorth(hose, &rsrc); disp_name = "UniNorth"; } else if (strcmp(dev->name, "pci") == 0) { /* XXX assume this is a mpc106 (grackle) */ setup_grackle(hose); disp_name = "Grackle (MPC106)"; } else if (strcmp(dev->name, "bandit") == 0) { - setup_bandit(hose, addr); + setup_bandit(hose, &rsrc); disp_name = "Bandit"; } else if (strcmp(dev->name, "chaos") == 0) { - setup_chaos(hose, addr); + setup_chaos(hose, &rsrc); disp_name = "Chaos"; primary = 0; } - printk(KERN_INFO "Found %s PCI host bridge at 0x%08lx. Firmware bus number: %d->%d\n", - disp_name, addr->address, hose->first_busno, hose->last_busno); -#endif + printk(KERN_INFO "Found %s PCI host bridge at 0x%08lx. " + "Firmware bus number: %d->%d\n", + disp_name, rsrc.start, hose->first_busno, hose->last_busno); +#endif /* CONFIG_PPC32 */ + DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n", hose, hose->cfg_addr, hose->cfg_data); @@ -814,8 +960,7 @@ static int __init add_bridge(struct device_node *dev) return 0; } -static void __init -pcibios_fixup_OF_interrupts(void) +static void __init pcibios_fixup_OF_interrupts(void) { struct pci_dev* dev = NULL; @@ -835,8 +980,7 @@ pcibios_fixup_OF_interrupts(void) } } -void __init -pmac_pcibios_fixup(void) +void __init pmac_pcibios_fixup(void) { /* Fixup interrupts according to OF tree */ pcibios_fixup_OF_interrupts(); @@ -899,6 +1043,8 @@ void __init pmac_pci_init(void) pci_setup_phb_io(u3_ht, 1); if (u3_agp) pci_setup_phb_io(u3_agp, 0); + if (u4_pcie) + pci_setup_phb_io(u4_pcie, 0); /* * On ppc64, fixup the IO resources on our host bridges as @@ -911,7 +1057,8 @@ void __init pmac_pci_init(void) /* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We * assume there is no P2P bridge on the AGP bus, which should be a - * safe assumptions hopefully. + * safe assumptions for now. We should do something better in the + * future though */ if (u3_agp) { struct device_node *np = u3_agp->arch_data; @@ -919,7 +1066,6 @@ void __init pmac_pci_init(void) for (np = np->child; np; np = np->sibling) PCI_DN(np)->busno = 0xf0; } - /* pmac_check_ht_link(); */ /* Tell pci.c to not use the common resource allocation mechanism */ @@ -1126,7 +1272,8 @@ void pmac_pci_fixup_pciata(struct pci_dev* dev) good: pci_read_config_byte(dev, PCI_CLASS_PROG, &progif); if ((progif & 5) != 5) { - printk(KERN_INFO "Forcing PCI IDE into native mode: %s\n", pci_name(dev)); + printk(KERN_INFO "Forcing PCI IDE into native mode: %s\n", + pci_name(dev)); (void) pci_write_config_byte(dev, PCI_CLASS_PROG, progif|5); if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) || (progif & 5) != 5) @@ -1152,7 +1299,8 @@ static void fixup_k2_sata(struct pci_dev* dev) for (i = 0; i < 6; i++) { dev->resource[i].start = dev->resource[i].end = 0; dev->resource[i].flags = 0; - pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, 0); + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, + 0); } } else { pci_read_config_word(dev, PCI_COMMAND, &cmd); @@ -1161,7 +1309,8 @@ static void fixup_k2_sata(struct pci_dev* dev) for (i = 0; i < 5; i++) { dev->resource[i].start = dev->resource[i].end = 0; dev->resource[i].flags = 0; - pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, 0); + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, + 0); } } } diff --git a/arch/powerpc/platforms/powermac/pfunc_base.c b/arch/powerpc/platforms/powermac/pfunc_base.c new file mode 100644 index 0000000..4ffd2a98 --- /dev/null +++ b/arch/powerpc/platforms/powermac/pfunc_base.c @@ -0,0 +1,405 @@ +#include <linux/config.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> + +#include <asm/pmac_feature.h> +#include <asm/pmac_pfunc.h> + +#define DBG(fmt...) printk(fmt) + +static irqreturn_t macio_gpio_irq(int irq, void *data, struct pt_regs *regs) +{ + pmf_do_irq(data); + + return IRQ_HANDLED; +} + +static int macio_do_gpio_irq_enable(struct pmf_function *func) +{ + if (func->node->n_intrs < 1) + return -EINVAL; + + return request_irq(func->node->intrs[0].line, macio_gpio_irq, 0, + func->node->name, func); +} + +static int macio_do_gpio_irq_disable(struct pmf_function *func) +{ + if (func->node->n_intrs < 1) + return -EINVAL; + + free_irq(func->node->intrs[0].line, func); + return 0; +} + +static int macio_do_gpio_write(PMF_STD_ARGS, u8 value, u8 mask) +{ + u8 __iomem *addr = (u8 __iomem *)func->driver_data; + unsigned long flags; + u8 tmp; + + /* Check polarity */ + if (args && args->count && !args->u[0].v) + value = ~value; + + /* Toggle the GPIO */ + spin_lock_irqsave(&feature_lock, flags); + tmp = readb(addr); + tmp = (tmp & ~mask) | (value & mask); + DBG("Do write 0x%02x to GPIO %s (%p)\n", + tmp, func->node->full_name, addr); + writeb(tmp, addr); + spin_unlock_irqrestore(&feature_lock, flags); + + return 0; +} + +static int macio_do_gpio_read(PMF_STD_ARGS, u8 mask, int rshift, u8 xor) +{ + u8 __iomem *addr = (u8 __iomem *)func->driver_data; + u32 value; + + /* Check if we have room for reply */ + if (args == NULL || args->count == 0 || args->u[0].p == NULL) + return -EINVAL; + + value = readb(addr); + *args->u[0].p = ((value & mask) >> rshift) ^ xor; + + return 0; +} + +static int macio_do_delay(PMF_STD_ARGS, u32 duration) +{ + /* assume we can sleep ! */ + msleep((duration + 999) / 1000); + return 0; +} + +static struct pmf_handlers macio_gpio_handlers = { + .irq_enable = macio_do_gpio_irq_enable, + .irq_disable = macio_do_gpio_irq_disable, + .write_gpio = macio_do_gpio_write, + .read_gpio = macio_do_gpio_read, + .delay = macio_do_delay, +}; + +static void macio_gpio_init_one(struct macio_chip *macio) +{ + struct device_node *gparent, *gp; + + /* + * Find the "gpio" parent node + */ + + for (gparent = NULL; + (gparent = of_get_next_child(macio->of_node, gparent)) != NULL;) + if (strcmp(gparent->name, "gpio") == 0) + break; + if (gparent == NULL) + return; + + DBG("Installing GPIO functions for macio %s\n", + macio->of_node->full_name); + + /* + * Ok, got one, we dont need anything special to track them down, so + * we just create them all + */ + for (gp = NULL; (gp = of_get_next_child(gparent, gp)) != NULL;) { + u32 *reg = (u32 *)get_property(gp, "reg", NULL); + unsigned long offset; + if (reg == NULL) + continue; + offset = *reg; + /* Deal with old style device-tree. We can safely hard code the + * offset for now too even if it's a bit gross ... + */ + if (offset < 0x50) + offset += 0x50; + offset += (unsigned long)macio->base; + pmf_register_driver(gp, &macio_gpio_handlers, (void *)offset); + } + + DBG("Calling initial GPIO functions for macio %s\n", + macio->of_node->full_name); + + /* And now we run all the init ones */ + for (gp = NULL; (gp = of_get_next_child(gparent, gp)) != NULL;) + pmf_do_functions(gp, NULL, 0, PMF_FLAGS_ON_INIT, NULL); + + /* Note: We do not at this point implement the "at sleep" or "at wake" + * functions. I yet to find any for GPIOs anyway + */ +} + +static int macio_do_write_reg32(PMF_STD_ARGS, u32 offset, u32 value, u32 mask) +{ + struct macio_chip *macio = func->driver_data; + unsigned long flags; + + spin_lock_irqsave(&feature_lock, flags); + MACIO_OUT32(offset, (MACIO_IN32(offset) & ~mask) | (value & mask)); + spin_unlock_irqrestore(&feature_lock, flags); + return 0; +} + +static int macio_do_read_reg32(PMF_STD_ARGS, u32 offset) +{ + struct macio_chip *macio = func->driver_data; + + /* Check if we have room for reply */ + if (args == NULL || args->count == 0 || args->u[0].p == NULL) + return -EINVAL; + + *args->u[0].p = MACIO_IN32(offset); + return 0; +} + +static int macio_do_write_reg8(PMF_STD_ARGS, u32 offset, u8 value, u8 mask) +{ + struct macio_chip *macio = func->driver_data; + unsigned long flags; + + spin_lock_irqsave(&feature_lock, flags); + MACIO_OUT8(offset, (MACIO_IN8(offset) & ~mask) | (value & mask)); + spin_unlock_irqrestore(&feature_lock, flags); + return 0; +} + +static int macio_do_read_reg8(PMF_STD_ARGS, u32 offset) +{ + struct macio_chip *macio = func->driver_data; + + /* Check if we have room for reply */ + if (args == NULL || args->count == 0 || args->u[0].p == NULL) + return -EINVAL; + + *((u8 *)(args->u[0].p)) = MACIO_IN8(offset); + return 0; +} + +static int macio_do_read_reg32_msrx(PMF_STD_ARGS, u32 offset, u32 mask, + u32 shift, u32 xor) +{ + struct macio_chip *macio = func->driver_data; + + /* Check if we have room for reply */ + if (args == NULL || args->count == 0 || args->u[0].p == NULL) + return -EINVAL; + + *args->u[0].p = ((MACIO_IN32(offset) & mask) >> shift) ^ xor; + return 0; +} + +static int macio_do_read_reg8_msrx(PMF_STD_ARGS, u32 offset, u32 mask, + u32 shift, u32 xor) +{ + struct macio_chip *macio = func->driver_data; + + /* Check if we have room for reply */ + if (args == NULL || args->count == 0 || args->u[0].p == NULL) + return -EINVAL; + + *((u8 *)(args->u[0].p)) = ((MACIO_IN8(offset) & mask) >> shift) ^ xor; + return 0; +} + +static int macio_do_write_reg32_slm(PMF_STD_ARGS, u32 offset, u32 shift, + u32 mask) +{ + struct macio_chip *macio = func->driver_data; + unsigned long flags; + u32 tmp, val; + + /* Check args */ + if (args == NULL || args->count == 0) + return -EINVAL; + + spin_lock_irqsave(&feature_lock, flags); + tmp = MACIO_IN32(offset); + val = args->u[0].v << shift; + tmp = (tmp & ~mask) | (val & mask); + MACIO_OUT32(offset, tmp); + spin_unlock_irqrestore(&feature_lock, flags); + return 0; +} + +static int macio_do_write_reg8_slm(PMF_STD_ARGS, u32 offset, u32 shift, + u32 mask) +{ + struct macio_chip *macio = func->driver_data; + unsigned long flags; + u32 tmp, val; + + /* Check args */ + if (args == NULL || args->count == 0) + return -EINVAL; + + spin_lock_irqsave(&feature_lock, flags); + tmp = MACIO_IN8(offset); + val = args->u[0].v << shift; + tmp = (tmp & ~mask) | (val & mask); + MACIO_OUT8(offset, tmp); + spin_unlock_irqrestore(&feature_lock, flags); + return 0; +} + +static struct pmf_handlers macio_mmio_handlers = { + .write_reg32 = macio_do_write_reg32, + .read_reg32 = macio_do_read_reg32, + .write_reg8 = macio_do_write_reg8, + .read_reg32 = macio_do_read_reg8, + .read_reg32_msrx = macio_do_read_reg32_msrx, + .read_reg8_msrx = macio_do_read_reg8_msrx, + .write_reg32_slm = macio_do_write_reg32_slm, + .write_reg8_slm = macio_do_write_reg8_slm, + .delay = macio_do_delay, +}; + +static void macio_mmio_init_one(struct macio_chip *macio) +{ + DBG("Installing MMIO functions for macio %s\n", + macio->of_node->full_name); + + pmf_register_driver(macio->of_node, &macio_mmio_handlers, macio); +} + +static struct device_node *unin_hwclock; + +static int unin_do_write_reg32(PMF_STD_ARGS, u32 offset, u32 value, u32 mask) +{ + unsigned long flags; + + spin_lock_irqsave(&feature_lock, flags); + /* This is fairly bogus in darwin, but it should work for our needs + * implemeted that way: + */ + UN_OUT(offset, (UN_IN(offset) & ~mask) | (value & mask)); + spin_unlock_irqrestore(&feature_lock, flags); + return 0; +} + + +static struct pmf_handlers unin_mmio_handlers = { + .write_reg32 = unin_do_write_reg32, + .delay = macio_do_delay, +}; + +static void uninorth_install_pfunc(void) +{ + struct device_node *np; + + DBG("Installing functions for UniN %s\n", + uninorth_node->full_name); + + /* + * Install handlers for the bridge itself + */ + pmf_register_driver(uninorth_node, &unin_mmio_handlers, NULL); + pmf_do_functions(uninorth_node, NULL, 0, PMF_FLAGS_ON_INIT, NULL); + + + /* + * Install handlers for the hwclock child if any + */ + for (np = NULL; (np = of_get_next_child(uninorth_node, np)) != NULL;) + if (strcmp(np->name, "hw-clock") == 0) { + unin_hwclock = np; + break; + } + if (unin_hwclock) { + DBG("Installing functions for UniN clock %s\n", + unin_hwclock->full_name); + pmf_register_driver(unin_hwclock, &unin_mmio_handlers, NULL); + pmf_do_functions(unin_hwclock, NULL, 0, PMF_FLAGS_ON_INIT, + NULL); + } +} + +/* We export this as the SMP code might init us early */ +int __init pmac_pfunc_base_install(void) +{ + static int pfbase_inited; + int i; + + if (pfbase_inited) + return 0; + pfbase_inited = 1; + + + DBG("Installing base platform functions...\n"); + + /* + * Locate mac-io chips and install handlers + */ + for (i = 0 ; i < MAX_MACIO_CHIPS; i++) { + if (macio_chips[i].of_node) { + macio_mmio_init_one(&macio_chips[i]); + macio_gpio_init_one(&macio_chips[i]); + } + } + + /* + * Install handlers for northbridge and direct mapped hwclock + * if any. We do not implement the config space access callback + * which is only ever used for functions that we do not call in + * the current driver (enabling/disabling cells in U2, mostly used + * to restore the PCI settings, we do that differently) + */ + if (uninorth_node && uninorth_base) + uninorth_install_pfunc(); + + DBG("All base functions installed\n"); + + return 0; +} + +arch_initcall(pmac_pfunc_base_install); + +#ifdef CONFIG_PM + +/* Those can be called by pmac_feature. Ultimately, I should use a sysdev + * or a device, but for now, that's good enough until I sort out some + * ordering issues. Also, we do not bother with GPIOs, as so far I yet have + * to see a case where a GPIO function has the on-suspend or on-resume bit + */ +void pmac_pfunc_base_suspend(void) +{ + int i; + + for (i = 0 ; i < MAX_MACIO_CHIPS; i++) { + if (macio_chips[i].of_node) + pmf_do_functions(macio_chips[i].of_node, NULL, 0, + PMF_FLAGS_ON_SLEEP, NULL); + } + if (uninorth_node) + pmf_do_functions(uninorth_node, NULL, 0, + PMF_FLAGS_ON_SLEEP, NULL); + if (unin_hwclock) + pmf_do_functions(unin_hwclock, NULL, 0, + PMF_FLAGS_ON_SLEEP, NULL); +} + +void pmac_pfunc_base_resume(void) +{ + int i; + + if (unin_hwclock) + pmf_do_functions(unin_hwclock, NULL, 0, + PMF_FLAGS_ON_WAKE, NULL); + if (uninorth_node) + pmf_do_functions(uninorth_node, NULL, 0, + PMF_FLAGS_ON_WAKE, NULL); + for (i = 0 ; i < MAX_MACIO_CHIPS; i++) { + if (macio_chips[i].of_node) + pmf_do_functions(macio_chips[i].of_node, NULL, 0, + PMF_FLAGS_ON_WAKE, NULL); + } +} + +#endif /* CONFIG_PM */ diff --git a/arch/powerpc/platforms/powermac/pfunc_core.c b/arch/powerpc/platforms/powermac/pfunc_core.c new file mode 100644 index 0000000..c32c623 --- /dev/null +++ b/arch/powerpc/platforms/powermac/pfunc_core.c @@ -0,0 +1,989 @@ +/* + * + * FIXME: Properly make this race free with refcounting etc... + * + * FIXME: LOCKING !!! + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/spinlock.h> +#include <linux/module.h> + +#include <asm/semaphore.h> +#include <asm/prom.h> +#include <asm/pmac_pfunc.h> + +/* Debug */ +#define LOG_PARSE(fmt...) +#define LOG_ERROR(fmt...) printk(fmt) +#define LOG_BLOB(t,b,c) +#define DBG(fmt...) printk(fmt) + +/* Command numbers */ +#define PMF_CMD_LIST 0 +#define PMF_CMD_WRITE_GPIO 1 +#define PMF_CMD_READ_GPIO 2 +#define PMF_CMD_WRITE_REG32 3 +#define PMF_CMD_READ_REG32 4 +#define PMF_CMD_WRITE_REG16 5 +#define PMF_CMD_READ_REG16 6 +#define PMF_CMD_WRITE_REG8 7 +#define PMF_CMD_READ_REG8 8 +#define PMF_CMD_DELAY 9 +#define PMF_CMD_WAIT_REG32 10 +#define PMF_CMD_WAIT_REG16 11 +#define PMF_CMD_WAIT_REG8 12 +#define PMF_CMD_READ_I2C 13 +#define PMF_CMD_WRITE_I2C 14 +#define PMF_CMD_RMW_I2C 15 +#define PMF_CMD_GEN_I2C 16 +#define PMF_CMD_SHIFT_BYTES_RIGHT 17 +#define PMF_CMD_SHIFT_BYTES_LEFT 18 +#define PMF_CMD_READ_CFG 19 +#define PMF_CMD_WRITE_CFG 20 +#define PMF_CMD_RMW_CFG 21 +#define PMF_CMD_READ_I2C_SUBADDR 22 +#define PMF_CMD_WRITE_I2C_SUBADDR 23 +#define PMF_CMD_SET_I2C_MODE 24 +#define PMF_CMD_RMW_I2C_SUBADDR 25 +#define PMF_CMD_READ_REG32_MASK_SHR_XOR 26 +#define PMF_CMD_READ_REG16_MASK_SHR_XOR 27 +#define PMF_CMD_READ_REG8_MASK_SHR_XOR 28 +#define PMF_CMD_WRITE_REG32_SHL_MASK 29 +#define PMF_CMD_WRITE_REG16_SHL_MASK 30 +#define PMF_CMD_WRITE_REG8_SHL_MASK 31 +#define PMF_CMD_MASK_AND_COMPARE 32 +#define PMF_CMD_COUNT 33 + +/* This structure holds the state of the parser while walking through + * a function definition + */ +struct pmf_cmd { + const void *cmdptr; + const void *cmdend; + struct pmf_function *func; + void *instdata; + struct pmf_args *args; + int error; +}; + +#if 0 +/* Debug output */ +static void print_blob(const char *title, const void *blob, int bytes) +{ + printk("%s", title); + while(bytes--) { + printk("%02x ", *((u8 *)blob)); + blob += 1; + } + printk("\n"); +} +#endif + +/* + * Parser helpers + */ + +static u32 pmf_next32(struct pmf_cmd *cmd) +{ + u32 value; + if ((cmd->cmdend - cmd->cmdptr) < 4) { + cmd->error = 1; + return 0; + } + value = *((u32 *)cmd->cmdptr); + cmd->cmdptr += 4; + return value; +} + +static const void* pmf_next_blob(struct pmf_cmd *cmd, int count) +{ + const void *value; + if ((cmd->cmdend - cmd->cmdptr) < count) { + cmd->error = 1; + return NULL; + } + value = cmd->cmdptr; + cmd->cmdptr += count; + return value; +} + +/* + * Individual command parsers + */ + +#define PMF_PARSE_CALL(name, cmd, handlers, p...) \ + do { \ + if (cmd->error) \ + return -ENXIO; \ + if (handlers == NULL) \ + return 0; \ + if (handlers->name) \ + return handlers->name(cmd->func, cmd->instdata, \ + cmd->args, p); \ + return -1; \ + } while(0) \ + + +static int pmf_parser_write_gpio(struct pmf_cmd *cmd, struct pmf_handlers *h) +{ + u8 value = (u8)pmf_next32(cmd); + u8 mask = (u8)pmf_next32(cmd); + + LOG_PARSE("pmf: write_gpio(value: %02x, mask: %02x)\n", value, mask); + + PMF_PARSE_CALL(write_gpio, cmd, h, value, mask); +} + +static int pmf_parser_read_gpio(struct pmf_cmd *cmd, struct pmf_handlers *h) +{ + u8 mask = (u8)pmf_next32(cmd); + int rshift = (int)pmf_next32(cmd); + u8 xor = (u8)pmf_next32(cmd); + + LOG_PARSE("pmf: read_gpio(mask: %02x, rshift: %d, xor: %02x)\n", + mask, rshift, xor); + + PMF_PARSE_CALL(read_gpio, cmd, h, mask, rshift, xor); +} + +static int pmf_parser_write_reg32(struct pmf_cmd *cmd, struct pmf_handlers *h) +{ + u32 offset = pmf_next32(cmd); + u32 value = pmf_next32(cmd); + u32 mask = pmf_next32(cmd); + + LOG_PARSE("pmf: write_reg32(offset: %08x, value: %08x, mask: %08x)\n", + offset, value, mask); + + PMF_PARSE_CALL(write_reg32, cmd, h, offset, value, mask); +} + +static int pmf_parser_read_reg32(struct pmf_cmd *cmd, struct pmf_handlers *h) +{ + u32 offset = pmf_next32(cmd); + + LOG_PARSE("pmf: read_reg32(offset: %08x)\n", offset); + + PMF_PARSE_CALL(read_reg32, cmd, h, offset); +} + + +static int pmf_parser_write_reg16(struct pmf_cmd *cmd, struct pmf_handlers *h) +{ + u32 offset = pmf_next32(cmd); + u16 value = (u16)pmf_next32(cmd); + u16 mask = (u16)pmf_next32(cmd); + + LOG_PARSE("pmf: write_reg16(offset: %08x, value: %04x, mask: %04x)\n", + offset, value, mask); + + PMF_PARSE_CALL(write_reg16, cmd, h, offset, value, mask); +} + +static int pmf_parser_read_reg16(struct pmf_cmd *cmd, struct pmf_handlers *h) +{ + u32 offset = pmf_next32(cmd); + + LOG_PARSE("pmf: read_reg16(offset: %08x)\n", offset); + + PMF_PARSE_CALL(read_reg16, cmd, h, offset); +} + + +static int pmf_parser_write_reg8(struct pmf_cmd *cmd, struct pmf_handlers *h) +{ + u32 offset = pmf_next32(cmd); + u8 value = (u16)pmf_next32(cmd); + u8 mask = (u16)pmf_next32(cmd); + + LOG_PARSE("pmf: write_reg8(offset: %08x, value: %02x, mask: %02x)\n", + offset, value, mask); + + PMF_PARSE_CALL(write_reg8, cmd, h, offset, value, mask); +} + +static int pmf_parser_read_reg8(struct pmf_cmd *cmd, struct pmf_handlers *h) +{ + u32 offset = pmf_next32(cmd); + + LOG_PARSE("pmf: read_reg8(offset: %08x)\n", offset); + + PMF_PARSE_CALL(read_reg8, cmd, h, offset); +} + +static int pmf_parser_delay(struct pmf_cmd *cmd, struct pmf_handlers *h) +{ + u32 duration = pmf_next32(cmd); + + LOG_PARSE("pmf: delay(duration: %d us)\n", duration); + + PMF_PARSE_CALL(delay, cmd, h, duration); +} + +static int pmf_parser_wait_reg32(struct pmf_cmd *cmd, struct pmf_handlers *h) +{ + u32 offset = pmf_next32(cmd); + u32 value = pmf_next32(cmd); + u32 mask = pmf_next32(cmd); + + LOG_PARSE("pmf: wait_reg32(offset: %08x, comp_value: %08x,mask: %08x)\n", + offset, value, mask); + + PMF_PARSE_CALL(wait_reg32, cmd, h, offset, value, mask); +} + +static int pmf_parser_wait_reg16(struct pmf_cmd *cmd, struct pmf_handlers *h) +{ + u32 offset = pmf_next32(cmd); + u16 value = (u16)pmf_next32(cmd); + u16 mask = (u16)pmf_next32(cmd); + + LOG_PARSE("pmf: wait_reg16(offset: %08x, comp_value: %04x,mask: %04x)\n", + offset, value, mask); + + PMF_PARSE_CALL(wait_reg16, cmd, h, offset, value, mask); +} + +static int pmf_parser_wait_reg8(struct pmf_cmd *cmd, struct pmf_handlers *h) +{ + u32 offset = pmf_next32(cmd); + u8 value = (u8)pmf_next32(cmd); + u8 mask = (u8)pmf_next32(cmd); + + LOG_PARSE("pmf: wait_reg8(offset: %08x, comp_value: %02x,mask: %02x)\n", + offset, value, mask); + + PMF_PARSE_CALL(wait_reg8, cmd, h, offset, value, mask); +} + +static int pmf_parser_read_i2c(struct pmf_cmd *cmd, struct pmf_handlers *h) +{ + u32 bytes = pmf_next32(cmd); + + LOG_PARSE("pmf: read_i2c(bytes: %ud)\n", bytes); + + PMF_PARSE_CALL(read_i2c, cmd, h, bytes); +} + +static int pmf_parser_write_i2c(struct pmf_cmd *cmd, struct pmf_handlers *h) +{ + u32 bytes = pmf_next32(cmd); + const void *blob = pmf_next_blob(cmd, bytes); + + LOG_PARSE("pmf: write_i2c(bytes: %ud) ...\n", bytes); + LOG_BLOB("pmf: data: \n", blob, bytes); + + PMF_PARSE_CALL(write_i2c, cmd, h, bytes, blob); +} + + +static int pmf_parser_rmw_i2c(struct pmf_cmd *cmd, struct pmf_handlers *h) +{ + u32 maskbytes = pmf_next32(cmd); + u32 valuesbytes = pmf_next32(cmd); + u32 totalbytes = pmf_next32(cmd); + const void *maskblob = pmf_next_blob(cmd, maskbytes); + const void *valuesblob = pmf_next_blob(cmd, valuesbytes); + + LOG_PARSE("pmf: rmw_i2c(maskbytes: %ud, valuebytes: %ud, " + "totalbytes: %d) ...\n", + maskbytes, valuesbytes, totalbytes); + LOG_BLOB("pmf: mask data: \n", maskblob, maskbytes); + LOG_BLOB("pmf: values data: \n", valuesblob, valuesbytes); + + PMF_PARSE_CALL(rmw_i2c, cmd, h, maskbytes, valuesbytes, totalbytes, + maskblob, valuesblob); +} + +static int pmf_parser_read_cfg(struct pmf_cmd *cmd, struct pmf_handlers *h) +{ + u32 offset = pmf_next32(cmd); + u32 bytes = pmf_next32(cmd); + + LOG_PARSE("pmf: read_cfg(offset: %x, bytes: %ud)\n", offset, bytes); + + PMF_PARSE_CALL(read_cfg, cmd, h, offset, bytes); +} + + +static int pmf_parser_write_cfg(struct pmf_cmd *cmd, struct pmf_handlers *h) +{ + u32 offset = pmf_next32(cmd); + u32 bytes = pmf_next32(cmd); + const void *blob = pmf_next_blob(cmd, bytes); + + LOG_PARSE("pmf: write_cfg(offset: %x, bytes: %ud)\n", offset, bytes); + LOG_BLOB("pmf: data: \n", blob, bytes); + + PMF_PARSE_CALL(write_cfg, cmd, h, offset, bytes, blob); +} + +static int pmf_parser_rmw_cfg(struct pmf_cmd *cmd, struct pmf_handlers *h) +{ + u32 offset = pmf_next32(cmd); + u32 maskbytes = pmf_next32(cmd); + u32 valuesbytes = pmf_next32(cmd); + u32 totalbytes = pmf_next32(cmd); + const void *maskblob = pmf_next_blob(cmd, maskbytes); + const void *valuesblob = pmf_next_blob(cmd, valuesbytes); + + LOG_PARSE("pmf: rmw_cfg(maskbytes: %ud, valuebytes: %ud," + " totalbytes: %d) ...\n", + maskbytes, valuesbytes, totalbytes); + LOG_BLOB("pmf: mask data: \n", maskblob, maskbytes); + LOG_BLOB("pmf: values data: \n", valuesblob, valuesbytes); + + PMF_PARSE_CALL(rmw_cfg, cmd, h, offset, maskbytes, valuesbytes, + totalbytes, maskblob, valuesblob); +} + + +static int pmf_parser_read_i2c_sub(struct pmf_cmd *cmd, struct pmf_handlers *h) +{ + u8 subaddr = (u8)pmf_next32(cmd); + u32 bytes = pmf_next32(cmd); + + LOG_PARSE("pmf: read_i2c_sub(subaddr: %x, bytes: %ud)\n", + subaddr, bytes); + + PMF_PARSE_CALL(read_i2c_sub, cmd, h, subaddr, bytes); +} + +static int pmf_parser_write_i2c_sub(struct pmf_cmd *cmd, struct pmf_handlers *h) +{ + u8 subaddr = (u8)pmf_next32(cmd); + u32 bytes = pmf_next32(cmd); + const void *blob = pmf_next_blob(cmd, bytes); + + LOG_PARSE("pmf: write_i2c_sub(subaddr: %x, bytes: %ud) ...\n", + subaddr, bytes); + LOG_BLOB("pmf: data: \n", blob, bytes); + + PMF_PARSE_CALL(write_i2c_sub, cmd, h, subaddr, bytes, blob); +} + +static int pmf_parser_set_i2c_mode(struct pmf_cmd *cmd, struct pmf_handlers *h) +{ + u32 mode = pmf_next32(cmd); + + LOG_PARSE("pmf: set_i2c_mode(mode: %d)\n", mode); + + PMF_PARSE_CALL(set_i2c_mode, cmd, h, mode); +} + + +static int pmf_parser_rmw_i2c_sub(struct pmf_cmd *cmd, struct pmf_handlers *h) +{ + u8 subaddr = (u8)pmf_next32(cmd); + u32 maskbytes = pmf_next32(cmd); + u32 valuesbytes = pmf_next32(cmd); + u32 totalbytes = pmf_next32(cmd); + const void *maskblob = pmf_next_blob(cmd, maskbytes); + const void *valuesblob = pmf_next_blob(cmd, valuesbytes); + + LOG_PARSE("pmf: rmw_i2c_sub(subaddr: %x, maskbytes: %ud, valuebytes: %ud" + ", totalbytes: %d) ...\n", + subaddr, maskbytes, valuesbytes, totalbytes); + LOG_BLOB("pmf: mask data: \n", maskblob, maskbytes); + LOG_BLOB("pmf: values data: \n", valuesblob, valuesbytes); + + PMF_PARSE_CALL(rmw_i2c_sub, cmd, h, subaddr, maskbytes, valuesbytes, + totalbytes, maskblob, valuesblob); +} + +static int pmf_parser_read_reg32_msrx(struct pmf_cmd *cmd, + struct pmf_handlers *h) +{ + u32 offset = pmf_next32(cmd); + u32 mask = pmf_next32(cmd); + u32 shift = pmf_next32(cmd); + u32 xor = pmf_next32(cmd); + + LOG_PARSE("pmf: read_reg32_msrx(offset: %x, mask: %x, shift: %x," + " xor: %x\n", offset, mask, shift, xor); + + PMF_PARSE_CALL(read_reg32_msrx, cmd, h, offset, mask, shift, xor); +} + +static int pmf_parser_read_reg16_msrx(struct pmf_cmd *cmd, + struct pmf_handlers *h) +{ + u32 offset = pmf_next32(cmd); + u32 mask = pmf_next32(cmd); + u32 shift = pmf_next32(cmd); + u32 xor = pmf_next32(cmd); + + LOG_PARSE("pmf: read_reg16_msrx(offset: %x, mask: %x, shift: %x," + " xor: %x\n", offset, mask, shift, xor); + + PMF_PARSE_CALL(read_reg16_msrx, cmd, h, offset, mask, shift, xor); +} +static int pmf_parser_read_reg8_msrx(struct pmf_cmd *cmd, + struct pmf_handlers *h) +{ + u32 offset = pmf_next32(cmd); + u32 mask = pmf_next32(cmd); + u32 shift = pmf_next32(cmd); + u32 xor = pmf_next32(cmd); + + LOG_PARSE("pmf: read_reg8_msrx(offset: %x, mask: %x, shift: %x," + " xor: %x\n", offset, mask, shift, xor); + + PMF_PARSE_CALL(read_reg8_msrx, cmd, h, offset, mask, shift, xor); +} + +static int pmf_parser_write_reg32_slm(struct pmf_cmd *cmd, + struct pmf_handlers *h) +{ + u32 offset = pmf_next32(cmd); + u32 shift = pmf_next32(cmd); + u32 mask = pmf_next32(cmd); + + LOG_PARSE("pmf: write_reg32_slm(offset: %x, shift: %x, mask: %x\n", + offset, shift, mask); + + PMF_PARSE_CALL(write_reg32_slm, cmd, h, offset, shift, mask); +} + +static int pmf_parser_write_reg16_slm(struct pmf_cmd *cmd, + struct pmf_handlers *h) +{ + u32 offset = pmf_next32(cmd); + u32 shift = pmf_next32(cmd); + u32 mask = pmf_next32(cmd); + + LOG_PARSE("pmf: write_reg16_slm(offset: %x, shift: %x, mask: %x\n", + offset, shift, mask); + + PMF_PARSE_CALL(write_reg16_slm, cmd, h, offset, shift, mask); +} + +static int pmf_parser_write_reg8_slm(struct pmf_cmd *cmd, + struct pmf_handlers *h) +{ + u32 offset = pmf_next32(cmd); + u32 shift = pmf_next32(cmd); + u32 mask = pmf_next32(cmd); + + LOG_PARSE("pmf: write_reg8_slm(offset: %x, shift: %x, mask: %x\n", + offset, shift, mask); + + PMF_PARSE_CALL(write_reg8_slm, cmd, h, offset, shift, mask); +} + +static int pmf_parser_mask_and_compare(struct pmf_cmd *cmd, + struct pmf_handlers *h) +{ + u32 bytes = pmf_next32(cmd); + const void *maskblob = pmf_next_blob(cmd, bytes); + const void *valuesblob = pmf_next_blob(cmd, bytes); + + LOG_PARSE("pmf: mask_and_compare(length: %ud ...\n", bytes); + LOG_BLOB("pmf: mask data: \n", maskblob, bytes); + LOG_BLOB("pmf: values data: \n", valuesblob, bytes); + + PMF_PARSE_CALL(mask_and_compare, cmd, h, + bytes, maskblob, valuesblob); +} + + +typedef int (*pmf_cmd_parser_t)(struct pmf_cmd *cmd, struct pmf_handlers *h); + +static pmf_cmd_parser_t pmf_parsers[PMF_CMD_COUNT] = +{ + NULL, + pmf_parser_write_gpio, + pmf_parser_read_gpio, + pmf_parser_write_reg32, + pmf_parser_read_reg32, + pmf_parser_write_reg16, + pmf_parser_read_reg16, + pmf_parser_write_reg8, + pmf_parser_read_reg8, + pmf_parser_delay, + pmf_parser_wait_reg32, + pmf_parser_wait_reg16, + pmf_parser_wait_reg8, + pmf_parser_read_i2c, + pmf_parser_write_i2c, + pmf_parser_rmw_i2c, + NULL, /* Bogus command */ + NULL, /* Shift bytes right: NYI */ + NULL, /* Shift bytes left: NYI */ + pmf_parser_read_cfg, + pmf_parser_write_cfg, + pmf_parser_rmw_cfg, + pmf_parser_read_i2c_sub, + pmf_parser_write_i2c_sub, + pmf_parser_set_i2c_mode, + pmf_parser_rmw_i2c_sub, + pmf_parser_read_reg32_msrx, + pmf_parser_read_reg16_msrx, + pmf_parser_read_reg8_msrx, + pmf_parser_write_reg32_slm, + pmf_parser_write_reg16_slm, + pmf_parser_write_reg8_slm, + pmf_parser_mask_and_compare, +}; + +struct pmf_device { + struct list_head link; + struct device_node *node; + struct pmf_handlers *handlers; + struct list_head functions; + struct kref ref; +}; + +static LIST_HEAD(pmf_devices); +static spinlock_t pmf_lock = SPIN_LOCK_UNLOCKED; + +static void pmf_release_device(struct kref *kref) +{ + struct pmf_device *dev = container_of(kref, struct pmf_device, ref); + kfree(dev); +} + +static inline void pmf_put_device(struct pmf_device *dev) +{ + kref_put(&dev->ref, pmf_release_device); +} + +static inline struct pmf_device *pmf_get_device(struct pmf_device *dev) +{ + kref_get(&dev->ref); + return dev; +} + +static inline struct pmf_device *pmf_find_device(struct device_node *np) +{ + struct pmf_device *dev; + + list_for_each_entry(dev, &pmf_devices, link) { + if (dev->node == np) + return pmf_get_device(dev); + } + return NULL; +} + +static int pmf_parse_one(struct pmf_function *func, + struct pmf_handlers *handlers, + void *instdata, struct pmf_args *args) +{ + struct pmf_cmd cmd; + u32 ccode; + int count, rc; + + cmd.cmdptr = func->data; + cmd.cmdend = func->data + func->length; + cmd.func = func; + cmd.instdata = instdata; + cmd.args = args; + cmd.error = 0; + + LOG_PARSE("pmf: func %s, %d bytes, %s...\n", + func->name, func->length, + handlers ? "executing" : "parsing"); + + /* One subcommand to parse for now */ + count = 1; + + while(count-- && cmd.cmdptr < cmd.cmdend) { + /* Get opcode */ + ccode = pmf_next32(&cmd); + /* Check if we are hitting a command list, fetch new count */ + if (ccode == 0) { + count = pmf_next32(&cmd) - 1; + ccode = pmf_next32(&cmd); + } + if (cmd.error) { + LOG_ERROR("pmf: parse error, not enough data\n"); + return -ENXIO; + } + if (ccode >= PMF_CMD_COUNT) { + LOG_ERROR("pmf: command code %d unknown !\n", ccode); + return -ENXIO; + } + if (pmf_parsers[ccode] == NULL) { + LOG_ERROR("pmf: no parser for command %d !\n", ccode); + return -ENXIO; + } + rc = pmf_parsers[ccode](&cmd, handlers); + if (rc != 0) { + LOG_ERROR("pmf: parser for command %d returned" + " error %d\n", ccode, rc); + return rc; + } + } + + /* We are doing an initial parse pass, we need to adjust the size */ + if (handlers == NULL) + func->length = cmd.cmdptr - func->data; + + return 0; +} + +static int pmf_add_function_prop(struct pmf_device *dev, void *driverdata, + const char *name, u32 *data, + unsigned int length) +{ + int count = 0; + struct pmf_function *func = NULL; + + DBG("pmf: Adding functions for platform-do-%s\n", name); + + while (length >= 12) { + /* Allocate a structure */ + func = kzalloc(sizeof(struct pmf_function), GFP_KERNEL); + if (func == NULL) + goto bail; + kref_init(&func->ref); + INIT_LIST_HEAD(&func->irq_clients); + func->node = dev->node; + func->driver_data = driverdata; + func->name = name; + func->phandle = data[0]; + func->flags = data[1]; + data += 2; + length -= 8; + func->data = data; + func->length = length; + func->dev = dev; + DBG("pmf: idx %d: flags=%08x, phandle=%08x " + " %d bytes remaining, parsing...\n", + count+1, func->flags, func->phandle, length); + if (pmf_parse_one(func, NULL, NULL, NULL)) { + kfree(func); + goto bail; + } + length -= func->length; + data = (u32 *)(((u8 *)data) + func->length); + list_add(&func->link, &dev->functions); + pmf_get_device(dev); + count++; + } + bail: + DBG("pmf: Added %d functions\n", count); + + return count; +} + +static int pmf_add_functions(struct pmf_device *dev, void *driverdata) +{ + struct property *pp; +#define PP_PREFIX "platform-do-" + const int plen = strlen(PP_PREFIX); + int count = 0; + + for (pp = dev->node->properties; pp != 0; pp = pp->next) { + char *name; + if (strncmp(pp->name, PP_PREFIX, plen) != 0) + continue; + name = pp->name + plen; + if (strlen(name) && pp->length >= 12) + count += pmf_add_function_prop(dev, driverdata, name, + (u32 *)pp->value, + pp->length); + } + return count; +} + + +int pmf_register_driver(struct device_node *np, + struct pmf_handlers *handlers, + void *driverdata) +{ + struct pmf_device *dev; + unsigned long flags; + int rc = 0; + + if (handlers == NULL) + return -EINVAL; + + DBG("pmf: registering driver for node %s\n", np->full_name); + + spin_lock_irqsave(&pmf_lock, flags); + dev = pmf_find_device(np); + spin_unlock_irqrestore(&pmf_lock, flags); + if (dev != NULL) { + DBG("pmf: already there !\n"); + pmf_put_device(dev); + return -EBUSY; + } + + dev = kzalloc(sizeof(struct pmf_device), GFP_KERNEL); + if (dev == NULL) { + DBG("pmf: no memory !\n"); + return -ENOMEM; + } + kref_init(&dev->ref); + dev->node = of_node_get(np); + dev->handlers = handlers; + INIT_LIST_HEAD(&dev->functions); + + rc = pmf_add_functions(dev, driverdata); + if (rc == 0) { + DBG("pmf: no functions, disposing.. \n"); + of_node_put(np); + kfree(dev); + return -ENODEV; + } + + spin_lock_irqsave(&pmf_lock, flags); + list_add(&dev->link, &pmf_devices); + spin_unlock_irqrestore(&pmf_lock, flags); + + return 0; +} +EXPORT_SYMBOL_GPL(pmf_register_driver); + +struct pmf_function *pmf_get_function(struct pmf_function *func) +{ + if (!try_module_get(func->dev->handlers->owner)) + return NULL; + kref_get(&func->ref); + return func; +} +EXPORT_SYMBOL_GPL(pmf_get_function); + +static void pmf_release_function(struct kref *kref) +{ + struct pmf_function *func = + container_of(kref, struct pmf_function, ref); + pmf_put_device(func->dev); + kfree(func); +} + +static inline void __pmf_put_function(struct pmf_function *func) +{ + kref_put(&func->ref, pmf_release_function); +} + +void pmf_put_function(struct pmf_function *func) +{ + if (func == NULL) + return; + module_put(func->dev->handlers->owner); + __pmf_put_function(func); +} +EXPORT_SYMBOL_GPL(pmf_put_function); + +void pmf_unregister_driver(struct device_node *np) +{ + struct pmf_device *dev; + unsigned long flags; + + DBG("pmf: unregistering driver for node %s\n", np->full_name); + + spin_lock_irqsave(&pmf_lock, flags); + dev = pmf_find_device(np); + if (dev == NULL) { + DBG("pmf: not such driver !\n"); + spin_unlock_irqrestore(&pmf_lock, flags); + return; + } + list_del(&dev->link); + + while(!list_empty(&dev->functions)) { + struct pmf_function *func = + list_entry(dev->functions.next, typeof(*func), link); + list_del(&func->link); + __pmf_put_function(func); + } + + pmf_put_device(dev); + spin_unlock_irqrestore(&pmf_lock, flags); +} +EXPORT_SYMBOL_GPL(pmf_unregister_driver); + +struct pmf_function *__pmf_find_function(struct device_node *target, + const char *name, u32 flags) +{ + struct device_node *actor = of_node_get(target); + struct pmf_device *dev; + struct pmf_function *func, *result = NULL; + char fname[64]; + u32 *prop, ph; + + /* + * Look for a "platform-*" function reference. If we can't find + * one, then we fallback to a direct call attempt + */ + snprintf(fname, 63, "platform-%s", name); + prop = (u32 *)get_property(target, fname, NULL); + if (prop == NULL) + goto find_it; + ph = *prop; + if (ph == 0) + goto find_it; + + /* + * Ok, now try to find the actor. If we can't find it, we fail, + * there is no point in falling back there + */ + of_node_put(actor); + actor = of_find_node_by_phandle(ph); + if (actor == NULL) + return NULL; + find_it: + dev = pmf_find_device(actor); + if (dev == NULL) + return NULL; + + list_for_each_entry(func, &dev->functions, link) { + if (name && strcmp(name, func->name)) + continue; + if (func->phandle && target->node != func->phandle) + continue; + if ((func->flags & flags) == 0) + continue; + result = func; + break; + } + of_node_put(actor); + pmf_put_device(dev); + return result; +} + + +int pmf_register_irq_client(struct device_node *target, + const char *name, + struct pmf_irq_client *client) +{ + struct pmf_function *func; + unsigned long flags; + + spin_lock_irqsave(&pmf_lock, flags); + func = __pmf_find_function(target, name, PMF_FLAGS_INT_GEN); + if (func == NULL) { + spin_unlock_irqrestore(&pmf_lock, flags); + return -ENODEV; + } + list_add(&client->link, &func->irq_clients); + spin_unlock_irqrestore(&pmf_lock, flags); + + return 0; +} +EXPORT_SYMBOL_GPL(pmf_register_irq_client); + +void pmf_unregister_irq_client(struct device_node *np, + const char *name, + struct pmf_irq_client *client) +{ + unsigned long flags; + + spin_lock_irqsave(&pmf_lock, flags); + list_del(&client->link); + spin_unlock_irqrestore(&pmf_lock, flags); +} +EXPORT_SYMBOL_GPL(pmf_unregister_irq_client); + + +void pmf_do_irq(struct pmf_function *func) +{ + unsigned long flags; + struct pmf_irq_client *client; + + /* For now, using a spinlock over the whole function. Can be made + * to drop the lock using 2 lists if necessary + */ + spin_lock_irqsave(&pmf_lock, flags); + list_for_each_entry(client, &func->irq_clients, link) { + if (!try_module_get(client->owner)) + continue; + client->handler(client->data); + module_put(client->owner); + } + spin_unlock_irqrestore(&pmf_lock, flags); +} +EXPORT_SYMBOL_GPL(pmf_do_irq); + + +int pmf_call_one(struct pmf_function *func, struct pmf_args *args) +{ + struct pmf_device *dev = func->dev; + void *instdata = NULL; + int rc = 0; + + DBG(" ** pmf_call_one(%s/%s) **\n", dev->node->full_name, func->name); + + if (dev->handlers->begin) + instdata = dev->handlers->begin(func, args); + rc = pmf_parse_one(func, dev->handlers, instdata, args); + if (dev->handlers->end) + dev->handlers->end(func, instdata); + + return rc; +} +EXPORT_SYMBOL_GPL(pmf_call_one); + +int pmf_do_functions(struct device_node *np, const char *name, + u32 phandle, u32 fflags, struct pmf_args *args) +{ + struct pmf_device *dev; + struct pmf_function *func, *tmp; + unsigned long flags; + int rc = -ENODEV; + + spin_lock_irqsave(&pmf_lock, flags); + + dev = pmf_find_device(np); + if (dev == NULL) { + spin_unlock_irqrestore(&pmf_lock, flags); + return -ENODEV; + } + list_for_each_entry_safe(func, tmp, &dev->functions, link) { + if (name && strcmp(name, func->name)) + continue; + if (phandle && func->phandle && phandle != func->phandle) + continue; + if ((func->flags & fflags) == 0) + continue; + if (pmf_get_function(func) == NULL) + continue; + spin_unlock_irqrestore(&pmf_lock, flags); + rc = pmf_call_one(func, args); + pmf_put_function(func); + spin_lock_irqsave(&pmf_lock, flags); + } + pmf_put_device(dev); + spin_unlock_irqrestore(&pmf_lock, flags); + + return rc; +} +EXPORT_SYMBOL_GPL(pmf_do_functions); + + +struct pmf_function *pmf_find_function(struct device_node *target, + const char *name) +{ + struct pmf_function *func; + unsigned long flags; + + spin_lock_irqsave(&pmf_lock, flags); + func = __pmf_find_function(target, name, PMF_FLAGS_ON_DEMAND); + if (func) + func = pmf_get_function(func); + spin_unlock_irqrestore(&pmf_lock, flags); + return func; +} +EXPORT_SYMBOL_GPL(pmf_find_function); + +int pmf_call_function(struct device_node *target, const char *name, + struct pmf_args *args) +{ + struct pmf_function *func = pmf_find_function(target, name); + int rc; + + if (func == NULL) + return -ENODEV; + + rc = pmf_call_one(func, args); + pmf_put_function(func); + return rc; +} +EXPORT_SYMBOL_GPL(pmf_call_function); + diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c index 90040c4..18bf301 100644 --- a/arch/powerpc/platforms/powermac/pic.c +++ b/arch/powerpc/platforms/powermac/pic.c @@ -5,8 +5,8 @@ * in a separate file * * Copyright (C) 1997 Paul Mackerras (paulus@samba.org) - * - * Maintained by Benjamin Herrenschmidt (benh@kernel.crashing.org) + * Copyright (C) 2005 Benjamin Herrenschmidt (benh@kernel.crashing.org) + * IBM, Corp. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -54,12 +54,7 @@ struct pmac_irq_hw { }; /* Default addresses */ -static volatile struct pmac_irq_hw *pmac_irq_hw[4] = { - (struct pmac_irq_hw *) 0xf3000020, - (struct pmac_irq_hw *) 0xf3000010, - (struct pmac_irq_hw *) 0xf4000020, - (struct pmac_irq_hw *) 0xf4000010, -}; +static volatile struct pmac_irq_hw __iomem *pmac_irq_hw[4]; #define GC_LEVEL_MASK 0x3ff00000 #define OHARE_LEVEL_MASK 0x1ff00000 @@ -82,8 +77,7 @@ static unsigned long ppc_lost_interrupts[NR_MASK_WORDS]; * since it can lose interrupts (see pmac_set_irq_mask). * -- Cort */ -void -__set_lost(unsigned long irq_nr, int nokick) +void __set_lost(unsigned long irq_nr, int nokick) { if (!test_and_set_bit(irq_nr, ppc_lost_interrupts)) { atomic_inc(&ppc_n_lost_interrupts); @@ -92,8 +86,7 @@ __set_lost(unsigned long irq_nr, int nokick) } } -static void -pmac_mask_and_ack_irq(unsigned int irq_nr) +static void pmac_mask_and_ack_irq(unsigned int irq_nr) { unsigned long bit = 1UL << (irq_nr & 0x1f); int i = irq_nr >> 5; @@ -224,8 +217,7 @@ static irqreturn_t gatwick_action(int cpl, void *dev_id, struct pt_regs *regs) return IRQ_NONE; } -int -pmac_get_irq(struct pt_regs *regs) +static int pmac_get_irq(struct pt_regs *regs) { int irq; unsigned long bits = 0; @@ -256,34 +248,40 @@ pmac_get_irq(struct pt_regs *regs) /* This routine will fix some missing interrupt values in the device tree * on the gatwick mac-io controller used by some PowerBooks + * + * Walking of OF nodes could use a bit more fixing up here, but it's not + * very important as this is all boot time code on static portions of the + * device-tree. + * + * However, the modifications done to "intrs" will have to be removed and + * replaced with proper updates of the "interrupts" properties or + * AAPL,interrupts, yet to be decided, once the dynamic parsing is there. */ -static void __init -pmac_fix_gatwick_interrupts(struct device_node *gw, int irq_base) +static void __init pmac_fix_gatwick_interrupts(struct device_node *gw, + int irq_base) { struct device_node *node; int count; memset(gatwick_int_pool, 0, sizeof(gatwick_int_pool)); - node = gw->child; count = 0; - while(node) - { + for (node = NULL; (node = of_get_next_child(gw, node)) != NULL;) { /* Fix SCC */ - if (strcasecmp(node->name, "escc") == 0) - if (node->child) { - if (node->child->n_intrs < 3) { - node->child->intrs = &gatwick_int_pool[count]; - count += 3; - } - node->child->n_intrs = 3; - node->child->intrs[0].line = 15+irq_base; - node->child->intrs[1].line = 4+irq_base; - node->child->intrs[2].line = 5+irq_base; - printk(KERN_INFO "irq: fixed SCC on second controller (%d,%d,%d)\n", - node->child->intrs[0].line, - node->child->intrs[1].line, - node->child->intrs[2].line); + if ((strcasecmp(node->name, "escc") == 0) && node->child) { + if (node->child->n_intrs < 3) { + node->child->intrs = &gatwick_int_pool[count]; + count += 3; } + node->child->n_intrs = 3; + node->child->intrs[0].line = 15+irq_base; + node->child->intrs[1].line = 4+irq_base; + node->child->intrs[2].line = 5+irq_base; + printk(KERN_INFO "irq: fixed SCC on gatwick" + " (%d,%d,%d)\n", + node->child->intrs[0].line, + node->child->intrs[1].line, + node->child->intrs[2].line); + } /* Fix media-bay & left SWIM */ if (strcasecmp(node->name, "media-bay") == 0) { struct device_node* ya_node; @@ -292,12 +290,11 @@ pmac_fix_gatwick_interrupts(struct device_node *gw, int irq_base) node->intrs = &gatwick_int_pool[count++]; node->n_intrs = 1; node->intrs[0].line = 29+irq_base; - printk(KERN_INFO "irq: fixed media-bay on second controller (%d)\n", - node->intrs[0].line); + printk(KERN_INFO "irq: fixed media-bay on gatwick" + " (%d)\n", node->intrs[0].line); ya_node = node->child; - while(ya_node) - { + while(ya_node) { if (strcasecmp(ya_node->name, "floppy") == 0) { if (ya_node->n_intrs < 2) { ya_node->intrs = &gatwick_int_pool[count]; @@ -323,7 +320,6 @@ pmac_fix_gatwick_interrupts(struct device_node *gw, int irq_base) ya_node = ya_node->sibling; } } - node = node->sibling; } if (count > 10) { printk("WARNING !! Gatwick interrupt pool overflow\n"); @@ -338,45 +334,41 @@ pmac_fix_gatwick_interrupts(struct device_node *gw, int irq_base) * controller. If we find this second ohare, set it up and fix the * interrupt value in the device tree for the ethernet chip. */ -static int __init enable_second_ohare(void) +static void __init enable_second_ohare(struct device_node *np) { unsigned char bus, devfn; unsigned short cmd; - unsigned long addr; - struct device_node *irqctrler = find_devices("pci106b,7"); struct device_node *ether; - if (irqctrler == NULL || irqctrler->n_addrs <= 0) - return -1; - addr = (unsigned long) ioremap(irqctrler->addrs[0].address, 0x40); - pmac_irq_hw[1] = (volatile struct pmac_irq_hw *)(addr + 0x20); - max_irqs = 64; - if (pci_device_from_OF_node(irqctrler, &bus, &devfn) == 0) { - struct pci_controller* hose = pci_find_hose_for_OF_device(irqctrler); - if (!hose) - printk(KERN_ERR "Can't find PCI hose for OHare2 !\n"); - else { - early_read_config_word(hose, bus, devfn, PCI_COMMAND, &cmd); - cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; - cmd &= ~PCI_COMMAND_IO; - early_write_config_word(hose, bus, devfn, PCI_COMMAND, cmd); + /* This code doesn't strictly belong here, it could be part of + * either the PCI initialisation or the feature code. It's kept + * here for historical reasons. + */ + if (pci_device_from_OF_node(np, &bus, &devfn) == 0) { + struct pci_controller* hose = + pci_find_hose_for_OF_device(np); + if (!hose) { + printk(KERN_ERR "Can't find PCI hose for OHare2 !\n"); + return; } + early_read_config_word(hose, bus, devfn, PCI_COMMAND, &cmd); + cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; + cmd &= ~PCI_COMMAND_IO; + early_write_config_word(hose, bus, devfn, PCI_COMMAND, cmd); } /* Fix interrupt for the modem/ethernet combo controller. The number - in the device tree (27) is bogus (correct for the ethernet-only - board but not the combo ethernet/modem board). - The real interrupt is 28 on the second controller -> 28+32 = 60. - */ - ether = find_devices("pci1011,14"); + * in the device tree (27) is bogus (correct for the ethernet-only + * board but not the combo ethernet/modem board). + * The real interrupt is 28 on the second controller -> 28+32 = 60. + */ + ether = of_find_node_by_name(NULL, "pci1011,14"); if (ether && ether->n_intrs > 0) { ether->intrs[0].line = 60; printk(KERN_INFO "irq: Fixed ethernet IRQ to %d\n", ether->intrs[0].line); } - - /* Return the interrupt number of the cascade */ - return irqctrler->intrs[0].line; + of_node_put(ether); } #ifdef CONFIG_XMON @@ -394,189 +386,251 @@ static struct irqaction gatwick_cascade_action = { .mask = CPU_MASK_NONE, .name = "cascade", }; -#endif /* CONFIG_PPC32 */ -static int pmac_u3_cascade(struct pt_regs *regs, void *data) +static void __init pmac_pic_probe_oldstyle(void) { - return mpic_get_one_irq((struct mpic *)data, regs); -} - -void __init pmac_pic_init(void) -{ - struct device_node *irqctrler = NULL; - struct device_node *irqctrler2 = NULL; - struct device_node *np; -#ifdef CONFIG_PPC32 int i; - unsigned long addr; int irq_cascade = -1; -#endif - struct mpic *mpic1, *mpic2; + struct device_node *master = NULL; + struct device_node *slave = NULL; + u8 __iomem *addr; + struct resource r; - /* We first try to detect Apple's new Core99 chipset, since mac-io - * is quite different on those machines and contains an IBM MPIC2. - */ - np = find_type_devices("open-pic"); - while (np) { - if (np->parent && !strcmp(np->parent->name, "u3")) - irqctrler2 = np; - else - irqctrler = np; - np = np->next; - } - if (irqctrler != NULL && irqctrler->n_addrs > 0) { - unsigned char senses[128]; - - printk(KERN_INFO "PowerMac using OpenPIC irq controller at 0x%08x\n", - (unsigned int)irqctrler->addrs[0].address); - pmac_call_feature(PMAC_FTR_ENABLE_MPIC, irqctrler, 0, 0); - - prom_get_irq_senses(senses, 0, 128); - mpic1 = mpic_alloc(irqctrler->addrs[0].address, - MPIC_PRIMARY | MPIC_WANTS_RESET, - 0, 0, 128, 252, senses, 128, " OpenPIC "); - BUG_ON(mpic1 == NULL); - mpic_init(mpic1); - - if (irqctrler2 != NULL && irqctrler2->n_intrs > 0 && - irqctrler2->n_addrs > 0) { - printk(KERN_INFO "Slave OpenPIC at 0x%08x hooked on IRQ %d\n", - (u32)irqctrler2->addrs[0].address, - irqctrler2->intrs[0].line); - - pmac_call_feature(PMAC_FTR_ENABLE_MPIC, irqctrler2, 0, 0); - prom_get_irq_senses(senses, 128, 128 + 124); - - /* We don't need to set MPIC_BROKEN_U3 here since we don't have - * hypertransport interrupts routed to it - */ - mpic2 = mpic_alloc(irqctrler2->addrs[0].address, - MPIC_BIG_ENDIAN | MPIC_WANTS_RESET, - 0, 128, 124, 0, senses, 124, - " U3-MPIC "); - BUG_ON(mpic2 == NULL); - mpic_init(mpic2); - mpic_setup_cascade(irqctrler2->intrs[0].line, - pmac_u3_cascade, mpic2); - } -#if defined(CONFIG_XMON) && defined(CONFIG_PPC32) - { - struct device_node* pswitch; - int nmi_irq; - - pswitch = find_devices("programmer-switch"); - if (pswitch && pswitch->n_intrs) { - nmi_irq = pswitch->intrs[0].line; - mpic_irq_set_priority(nmi_irq, 9); - setup_irq(nmi_irq, &xmon_action); - } - } -#endif /* CONFIG_XMON */ - return; - } - irqctrler = NULL; + /* Set our get_irq function */ + ppc_md.get_irq = pmac_get_irq; -#ifdef CONFIG_PPC32 - /* Get the level/edge settings, assume if it's not - * a Grand Central nor an OHare, then it's an Heathrow - * (or Paddington). + /* + * Find the interrupt controller type & node */ - ppc_md.get_irq = pmac_get_irq; - if (find_devices("gc")) + + if ((master = of_find_node_by_name(NULL, "gc")) != NULL) { + max_irqs = max_real_irqs = 32; level_mask[0] = GC_LEVEL_MASK; - else if (find_devices("ohare")) { + } else if ((master = of_find_node_by_name(NULL, "ohare")) != NULL) { + max_irqs = max_real_irqs = 32; level_mask[0] = OHARE_LEVEL_MASK; + /* We might have a second cascaded ohare */ - level_mask[1] = OHARE_LEVEL_MASK; - } else { + slave = of_find_node_by_name(NULL, "pci106b,7"); + if (slave) { + max_irqs = 64; + level_mask[1] = OHARE_LEVEL_MASK; + enable_second_ohare(slave); + } + } else if ((master = of_find_node_by_name(NULL, "mac-io")) != NULL) { + max_irqs = max_real_irqs = 64; level_mask[0] = HEATHROW_LEVEL_MASK; level_mask[1] = 0; + /* We might have a second cascaded heathrow */ - level_mask[2] = HEATHROW_LEVEL_MASK; - level_mask[3] = 0; - } + slave = of_find_node_by_name(master, "mac-io"); + + /* Check ordering of master & slave */ + if (device_is_compatible(master, "gatwick")) { + struct device_node *tmp; + BUG_ON(slave == NULL); + tmp = master; + master = slave; + slave = tmp; + } - /* - * G3 powermacs and 1999 G3 PowerBooks have 64 interrupts, - * 1998 G3 Series PowerBooks have 128, - * other powermacs have 32. - * The combo ethernet/modem card for the Powerstar powerbooks - * (2400/3400/3500, ohare based) has a second ohare chip - * effectively making a total of 64. - */ - max_irqs = max_real_irqs = 32; - irqctrler = find_devices("mac-io"); - if (irqctrler) - { - max_real_irqs = 64; - if (irqctrler->next) + /* We found a slave */ + if (slave) { max_irqs = 128; - else - max_irqs = 64; + level_mask[2] = HEATHROW_LEVEL_MASK; + level_mask[3] = 0; + pmac_fix_gatwick_interrupts(slave, max_real_irqs); + } } + BUG_ON(master == NULL); + + /* Set the handler for the main PIC */ for ( i = 0; i < max_real_irqs ; i++ ) irq_desc[i].handler = &pmac_pic; - /* get addresses of first controller */ - if (irqctrler) { - if (irqctrler->n_addrs > 0) { - addr = (unsigned long) - ioremap(irqctrler->addrs[0].address, 0x40); - for (i = 0; i < 2; ++i) - pmac_irq_hw[i] = (volatile struct pmac_irq_hw*) - (addr + (2 - i) * 0x10); - } + /* Get addresses of first controller if we have a node for it */ + BUG_ON(of_address_to_resource(master, 0, &r)); - /* get addresses of second controller */ - irqctrler = irqctrler->next; - if (irqctrler && irqctrler->n_addrs > 0) { - addr = (unsigned long) - ioremap(irqctrler->addrs[0].address, 0x40); - for (i = 2; i < 4; ++i) - pmac_irq_hw[i] = (volatile struct pmac_irq_hw*) - (addr + (4 - i) * 0x10); - irq_cascade = irqctrler->intrs[0].line; - if (device_is_compatible(irqctrler, "gatwick")) - pmac_fix_gatwick_interrupts(irqctrler, max_real_irqs); - } - } else { - /* older powermacs have a GC (grand central) or ohare at - f3000000, with interrupt control registers at f3000020. */ - addr = (unsigned long) ioremap(0xf3000000, 0x40); - pmac_irq_hw[0] = (volatile struct pmac_irq_hw *) (addr + 0x20); + /* Map interrupts of primary controller */ + addr = (u8 __iomem *) ioremap(r.start, 0x40); + i = 0; + pmac_irq_hw[i++] = (volatile struct pmac_irq_hw __iomem *) + (addr + 0x20); + if (max_real_irqs > 32) + pmac_irq_hw[i++] = (volatile struct pmac_irq_hw __iomem *) + (addr + 0x10); + of_node_put(master); + + printk(KERN_INFO "irq: Found primary Apple PIC %s for %d irqs\n", + master->full_name, max_real_irqs); + + /* Map interrupts of cascaded controller */ + if (slave && !of_address_to_resource(slave, 0, &r)) { + addr = (u8 __iomem *)ioremap(r.start, 0x40); + pmac_irq_hw[i++] = (volatile struct pmac_irq_hw __iomem *) + (addr + 0x20); + if (max_irqs > 64) + pmac_irq_hw[i++] = + (volatile struct pmac_irq_hw __iomem *) + (addr + 0x10); + irq_cascade = slave->intrs[0].line; + + printk(KERN_INFO "irq: Found slave Apple PIC %s for %d irqs" + " cascade: %d\n", slave->full_name, + max_irqs - max_real_irqs, irq_cascade); } - - /* PowerBooks 3400 and 3500 can have a second controller in a second - ohare chip, on the combo ethernet/modem card */ - if (machine_is_compatible("AAPL,3400/2400") - || machine_is_compatible("AAPL,3500")) - irq_cascade = enable_second_ohare(); + of_node_put(slave); /* disable all interrupts in all controllers */ for (i = 0; i * 32 < max_irqs; ++i) out_le32(&pmac_irq_hw[i]->enable, 0); + /* mark level interrupts */ for (i = 0; i < max_irqs; i++) if (level_mask[i >> 5] & (1UL << (i & 0x1f))) irq_desc[i].status = IRQ_LEVEL; - /* get interrupt line of secondary interrupt controller */ - if (irq_cascade >= 0) { - printk(KERN_INFO "irq: secondary controller on irq %d\n", - (int)irq_cascade); + /* Setup handlers for secondary controller and hook cascade irq*/ + if (slave) { for ( i = max_real_irqs ; i < max_irqs ; i++ ) irq_desc[i].handler = &gatwick_pic; setup_irq(irq_cascade, &gatwick_cascade_action); } - printk("System has %d possible interrupts\n", max_irqs); - if (max_irqs != max_real_irqs) - printk(KERN_DEBUG "%d interrupts on main controller\n", - max_real_irqs); - + printk(KERN_INFO "irq: System has %d possible interrupts\n", max_irqs); #ifdef CONFIG_XMON setup_irq(20, &xmon_action); -#endif /* CONFIG_XMON */ -#endif /* CONFIG_PPC32 */ +#endif +} +#endif /* CONFIG_PPC32 */ + +static int pmac_u3_cascade(struct pt_regs *regs, void *data) +{ + return mpic_get_one_irq((struct mpic *)data, regs); +} + +static void __init pmac_pic_setup_mpic_nmi(struct mpic *mpic) +{ +#if defined(CONFIG_XMON) && defined(CONFIG_PPC32) + struct device_node* pswitch; + int nmi_irq; + + pswitch = of_find_node_by_name(NULL, "programmer-switch"); + if (pswitch && pswitch->n_intrs) { + nmi_irq = pswitch->intrs[0].line; + mpic_irq_set_priority(nmi_irq, 9); + setup_irq(nmi_irq, &xmon_action); + } + of_node_put(pswitch); +#endif /* defined(CONFIG_XMON) && defined(CONFIG_PPC32) */ +} + +static struct mpic * __init pmac_setup_one_mpic(struct device_node *np, + int master) +{ + unsigned char senses[128]; + int offset = master ? 0 : 128; + int count = master ? 128 : 124; + const char *name = master ? " MPIC 1 " : " MPIC 2 "; + struct resource r; + struct mpic *mpic; + unsigned int flags = master ? MPIC_PRIMARY : 0; + int rc; + + rc = of_address_to_resource(np, 0, &r); + if (rc) + return NULL; + + pmac_call_feature(PMAC_FTR_ENABLE_MPIC, np, 0, 0); + + prom_get_irq_senses(senses, offset, offset + count); + + flags |= MPIC_WANTS_RESET; + if (get_property(np, "big-endian", NULL)) + flags |= MPIC_BIG_ENDIAN; + + /* Primary Big Endian means HT interrupts. This is quite dodgy + * but works until I find a better way + */ + if (master && (flags & MPIC_BIG_ENDIAN)) + flags |= MPIC_BROKEN_U3; + + mpic = mpic_alloc(r.start, flags, 0, offset, count, master ? 252 : 0, + senses, count, name); + if (mpic == NULL) + return NULL; + + mpic_init(mpic); + + return mpic; + } + +static int __init pmac_pic_probe_mpic(void) +{ + struct mpic *mpic1, *mpic2; + struct device_node *np, *master = NULL, *slave = NULL; + + /* We can have up to 2 MPICs cascaded */ + for (np = NULL; (np = of_find_node_by_type(np, "open-pic")) + != NULL;) { + if (master == NULL && + get_property(np, "interrupts", NULL) == NULL) + master = of_node_get(np); + else if (slave == NULL) + slave = of_node_get(np); + if (master && slave) + break; + } + + /* Check for bogus setups */ + if (master == NULL && slave != NULL) { + master = slave; + slave = NULL; + } + + /* Not found, default to good old pmac pic */ + if (master == NULL) + return -ENODEV; + + /* Set master handler */ + ppc_md.get_irq = mpic_get_irq; + + /* Setup master */ + mpic1 = pmac_setup_one_mpic(master, 1); + BUG_ON(mpic1 == NULL); + + /* Install NMI if any */ + pmac_pic_setup_mpic_nmi(mpic1); + + of_node_put(master); + + /* No slave, let's go out */ + if (slave == NULL || slave->n_intrs < 1) + return 0; + + mpic2 = pmac_setup_one_mpic(slave, 0); + if (mpic2 == NULL) { + printk(KERN_ERR "Failed to setup slave MPIC\n"); + of_node_put(slave); + return 0; + } + mpic_setup_cascade(slave->intrs[0].line, pmac_u3_cascade, mpic2); + + of_node_put(slave); + return 0; +} + + +void __init pmac_pic_init(void) +{ + /* We first try to detect Apple's new Core99 chipset, since mac-io + * is quite different on those machines and contains an IBM MPIC2. + */ + if (pmac_pic_probe_mpic() == 0) + return; + +#ifdef CONFIG_PPC32 + pmac_pic_probe_oldstyle(); +#endif } #if defined(CONFIG_PM) && defined(CONFIG_PPC32) diff --git a/arch/powerpc/platforms/powermac/pmac.h b/arch/powerpc/platforms/powermac/pmac.h index 2ad25e1..21c7b0f 100644 --- a/arch/powerpc/platforms/powermac/pmac.h +++ b/arch/powerpc/platforms/powermac/pmac.h @@ -42,10 +42,6 @@ extern void pmac_ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port, unsigned long ctrl_port, int *irq); extern int pmac_nvram_init(void); - -extern struct hw_interrupt_type pmac_pic; - -void pmac_pic_init(void); -int pmac_get_irq(struct pt_regs *regs); +extern void pmac_pic_init(void); #endif /* __PMAC_H__ */ diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index 7acb054..3b1a9d4 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -60,6 +60,7 @@ #include <asm/system.h> #include <asm/pgtable.h> #include <asm/io.h> +#include <asm/kexec.h> #include <asm/pci-bridge.h> #include <asm/ohare.h> #include <asm/mediabay.h> @@ -74,8 +75,8 @@ #include <asm/iommu.h> #include <asm/smu.h> #include <asm/pmc.h> -#include <asm/mpic.h> #include <asm/lmb.h> +#include <asm/udbg.h> #include "pmac.h" @@ -321,16 +322,6 @@ void __init pmac_setup_arch(void) l2cr_init(); #endif /* CONFIG_PPC32 */ -#ifdef CONFIG_PPC64 - /* Probe motherboard chipset */ - /* this is done earlier in setup_arch for 32-bit */ - pmac_feature_init(); - - /* We can NAP */ - powersave_nap = 1; - printk(KERN_INFO "Using native/NAP idle loop\n"); -#endif - #ifdef CONFIG_KGDB zs_kgdb_hook(0); #endif @@ -354,7 +345,7 @@ void __init pmac_setup_arch(void) #ifdef CONFIG_SMP /* Check for Core99 */ - if (find_devices("uni-n") || find_devices("u3")) + if (find_devices("uni-n") || find_devices("u3") || find_devices("u4")) smp_ops = &core99_smp_ops; #ifdef CONFIG_PPC32 else @@ -621,35 +612,31 @@ static void __init pmac_init_early(void) * and call ioremap */ hpte_init_native(); +#endif - /* Init SCC */ - if (strstr(cmd_line, "sccdbg")) { - sccdbg = 1; - udbg_init_scc(NULL); + /* Enable early btext debug if requested */ + if (strstr(cmd_line, "btextdbg")) { + udbg_adb_init_early(); + register_early_udbg_console(); } - /* Setup interrupt mapping options */ - ppc64_interrupt_controller = IC_OPEN_PIC; + /* Probe motherboard chipset */ + pmac_feature_init(); - iommu_init_early_u3(); -#endif -} + /* We can NAP */ + powersave_nap = 1; + printk(KERN_INFO "Using native/NAP idle loop\n"); + + /* Initialize debug stuff */ + udbg_scc_init(!!strstr(cmd_line, "sccdbg")); + udbg_adb_init(!!strstr(cmd_line, "btextdbg")); -static void __init pmac_progress(char *s, unsigned short hex) -{ #ifdef CONFIG_PPC64 - if (sccdbg) { - udbg_puts(s); - udbg_puts("\n"); - return; - } + /* Setup interrupt mapping options */ + ppc64_interrupt_controller = IC_OPEN_PIC; + + iommu_init_early_dart(); #endif -#ifdef CONFIG_BOOTX_TEXT - if (boot_text_mapped) { - btext_drawstring(s); - btext_drawchar('\n'); - } -#endif /* CONFIG_BOOTX_TEXT */ } /* @@ -663,35 +650,14 @@ static int pmac_check_legacy_ioport(unsigned int baseport) static int __init pmac_declare_of_platform_devices(void) { - struct device_node *np, *npp; - - np = find_devices("uni-n"); - if (np) { - for (np = np->child; np != NULL; np = np->sibling) - if (strncmp(np->name, "i2c", 3) == 0) { - of_platform_device_create(np, "uni-n-i2c", - NULL); - break; - } - } - np = find_devices("valkyrie"); + struct device_node *np; + + np = of_find_node_by_name(NULL, "valkyrie"); if (np) of_platform_device_create(np, "valkyrie", NULL); - np = find_devices("platinum"); + np = of_find_node_by_name(NULL, "platinum"); if (np) of_platform_device_create(np, "platinum", NULL); - - npp = of_find_node_by_name(NULL, "u3"); - if (npp) { - for (np = NULL; (np = of_get_next_child(npp, np)) != NULL;) { - if (strncmp(np->name, "i2c", 3) == 0) { - of_platform_device_create(np, "u3-i2c", NULL); - of_node_put(np); - break; - } - } - of_node_put(npp); - } np = of_find_node_by_type(NULL, "smu"); if (np) { of_platform_device_create(np, "smu", NULL); @@ -718,7 +684,7 @@ static int __init pmac_probe(int platform) * occupies having to be broken up so the DART itself is not * part of the cacheable linar mapping */ - alloc_u3_dart_table(); + alloc_dart_table(); #endif #ifdef CONFIG_PMAC_SMU @@ -734,15 +700,17 @@ static int __init pmac_probe(int platform) } #ifdef CONFIG_PPC64 -static int pmac_probe_mode(struct pci_bus *bus) +/* Move that to pci.c */ +static int pmac_pci_probe_mode(struct pci_bus *bus) { struct device_node *node = bus->sysdata; /* We need to use normal PCI probing for the AGP bus, - since the device for the AGP bridge isn't in the tree. */ - if (bus->self == NULL && device_is_compatible(node, "u3-agp")) + * since the device for the AGP bridge isn't in the tree. + */ + if (bus->self == NULL && (device_is_compatible(node, "u3-agp") || + device_is_compatible(node, "u4-pcie"))) return PCI_PROBE_NORMAL; - return PCI_PROBE_DEVTREE; } #endif @@ -756,7 +724,7 @@ struct machdep_calls __initdata pmac_md = { .init_early = pmac_init_early, .show_cpuinfo = pmac_show_cpuinfo, .init_IRQ = pmac_pic_init, - .get_irq = mpic_get_irq, /* changed later */ + .get_irq = NULL, /* changed later */ .pcibios_fixup = pmac_pcibios_fixup, .restart = pmac_restart, .power_off = pmac_power_off, @@ -768,12 +736,17 @@ struct machdep_calls __initdata pmac_md = { .calibrate_decr = pmac_calibrate_decr, .feature_call = pmac_do_feature_call, .check_legacy_ioport = pmac_check_legacy_ioport, - .progress = pmac_progress, + .progress = udbg_progress, #ifdef CONFIG_PPC64 - .pci_probe_mode = pmac_probe_mode, + .pci_probe_mode = pmac_pci_probe_mode, .idle_loop = native_idle, .enable_pmcs = power4_enable_pmcs, +#ifdef CONFIG_KEXEC + .machine_kexec = default_machine_kexec, + .machine_kexec_prepare = default_machine_kexec_prepare, + .machine_crash_shutdown = default_machine_crash_shutdown, #endif +#endif /* CONFIG_PPC64 */ #ifdef CONFIG_PPC32 .pcibios_enable_device_hook = pmac_pci_enable_device_hook, .pcibios_after_init = pmac_pcibios_after_init, diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c index fb2a7c7..0df2cdc 100644 --- a/arch/powerpc/platforms/powermac/smp.c +++ b/arch/powerpc/platforms/powermac/smp.c @@ -52,8 +52,9 @@ #include <asm/cacheflush.h> #include <asm/keylargo.h> #include <asm/pmac_low_i2c.h> +#include <asm/pmac_pfunc.h> -#undef DEBUG +#define DEBUG #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) @@ -62,6 +63,7 @@ #endif extern void __secondary_start_pmac_0(void); +extern int pmac_pfunc_base_install(void); #ifdef CONFIG_PPC32 @@ -361,7 +363,6 @@ static void __init psurge_dual_sync_tb(int cpu_nr) set_dec(tb_ticks_per_jiffy); /* XXX fixme */ set_tb(0, 0); - last_jiffy_stamp(cpu_nr) = 0; if (cpu_nr > 0) { mb(); @@ -429,15 +430,62 @@ struct smp_ops_t psurge_smp_ops = { }; #endif /* CONFIG_PPC32 - actually powersurge support */ +/* + * Core 99 and later support + */ + +static void (*pmac_tb_freeze)(int freeze); +static unsigned long timebase; +static int tb_req; + +static void smp_core99_give_timebase(void) +{ + unsigned long flags; + + local_irq_save(flags); + + while(!tb_req) + barrier(); + tb_req = 0; + (*pmac_tb_freeze)(1); + mb(); + timebase = get_tb(); + mb(); + while (timebase) + barrier(); + mb(); + (*pmac_tb_freeze)(0); + mb(); + + local_irq_restore(flags); +} + + +static void __devinit smp_core99_take_timebase(void) +{ + unsigned long flags; + + local_irq_save(flags); + + tb_req = 1; + mb(); + while (!timebase) + barrier(); + mb(); + set_tb(timebase >> 32, timebase & 0xffffffff); + timebase = 0; + mb(); + set_dec(tb_ticks_per_jiffy/2); + + local_irq_restore(flags); +} + #ifdef CONFIG_PPC64 /* * G5s enable/disable the timebase via an i2c-connected clock chip. */ -static struct device_node *pmac_tb_clock_chip_host; +static struct pmac_i2c_bus *pmac_tb_clock_chip_host; static u8 pmac_tb_pulsar_addr; -static void (*pmac_tb_freeze)(int freeze); -static DEFINE_SPINLOCK(timebase_lock); -static unsigned long timebase; static void smp_core99_cypress_tb_freeze(int freeze) { @@ -447,19 +495,20 @@ static void smp_core99_cypress_tb_freeze(int freeze) /* Strangely, the device-tree says address is 0xd2, but darwin * accesses 0xd0 ... */ - pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_combined); - rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host, - 0xd0 | pmac_low_i2c_read, - 0x81, &data, 1); + pmac_i2c_setmode(pmac_tb_clock_chip_host, + pmac_i2c_mode_combined); + rc = pmac_i2c_xfer(pmac_tb_clock_chip_host, + 0xd0 | pmac_i2c_read, + 1, 0x81, &data, 1); if (rc != 0) goto bail; data = (data & 0xf3) | (freeze ? 0x00 : 0x0c); - pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_stdsub); - rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host, - 0xd0 | pmac_low_i2c_write, - 0x81, &data, 1); + pmac_i2c_setmode(pmac_tb_clock_chip_host, pmac_i2c_mode_stdsub); + rc = pmac_i2c_xfer(pmac_tb_clock_chip_host, + 0xd0 | pmac_i2c_write, + 1, 0x81, &data, 1); bail: if (rc != 0) { @@ -475,19 +524,20 @@ static void smp_core99_pulsar_tb_freeze(int freeze) u8 data; int rc; - pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_combined); - rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host, - pmac_tb_pulsar_addr | pmac_low_i2c_read, - 0x2e, &data, 1); + pmac_i2c_setmode(pmac_tb_clock_chip_host, + pmac_i2c_mode_combined); + rc = pmac_i2c_xfer(pmac_tb_clock_chip_host, + pmac_tb_pulsar_addr | pmac_i2c_read, + 1, 0x2e, &data, 1); if (rc != 0) goto bail; data = (data & 0x88) | (freeze ? 0x11 : 0x22); - pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_stdsub); - rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host, - pmac_tb_pulsar_addr | pmac_low_i2c_write, - 0x2e, &data, 1); + pmac_i2c_setmode(pmac_tb_clock_chip_host, pmac_i2c_mode_stdsub); + rc = pmac_i2c_xfer(pmac_tb_clock_chip_host, + pmac_tb_pulsar_addr | pmac_i2c_write, + 1, 0x2e, &data, 1); bail: if (rc != 0) { printk(KERN_ERR "Pulsar Timebase %s rc: %d\n", @@ -496,54 +546,14 @@ static void smp_core99_pulsar_tb_freeze(int freeze) } } - -static void smp_core99_give_timebase(void) -{ - /* Open i2c bus for synchronous access */ - if (pmac_low_i2c_open(pmac_tb_clock_chip_host, 0)) - panic("Can't open i2c for TB sync !\n"); - - spin_lock(&timebase_lock); - (*pmac_tb_freeze)(1); - mb(); - timebase = get_tb(); - spin_unlock(&timebase_lock); - - while (timebase) - barrier(); - - spin_lock(&timebase_lock); - (*pmac_tb_freeze)(0); - spin_unlock(&timebase_lock); - - /* Close i2c bus */ - pmac_low_i2c_close(pmac_tb_clock_chip_host); -} - - -static void __devinit smp_core99_take_timebase(void) -{ - while (!timebase) - barrier(); - spin_lock(&timebase_lock); - set_tb(timebase >> 32, timebase & 0xffffffff); - timebase = 0; - spin_unlock(&timebase_lock); -} - -static void __init smp_core99_setup(int ncpus) +static void __init smp_core99_setup_i2c_hwsync(int ncpus) { struct device_node *cc = NULL; struct device_node *p; + const char *name = NULL; u32 *reg; int ok; - /* HW sync only on these platforms */ - if (!machine_is_compatible("PowerMac7,2") && - !machine_is_compatible("PowerMac7,3") && - !machine_is_compatible("RackMac3,1")) - return; - /* Look for the clock chip */ while ((cc = of_find_node_by_name(cc, "i2c-hwclock")) != NULL) { p = of_get_parent(cc); @@ -552,124 +562,86 @@ static void __init smp_core99_setup(int ncpus) if (!ok) continue; + pmac_tb_clock_chip_host = pmac_i2c_find_bus(cc); + if (pmac_tb_clock_chip_host == NULL) + continue; reg = (u32 *)get_property(cc, "reg", NULL); if (reg == NULL) continue; - switch (*reg) { case 0xd2: - if (device_is_compatible(cc, "pulsar-legacy-slewing")) { + if (device_is_compatible(cc,"pulsar-legacy-slewing")) { pmac_tb_freeze = smp_core99_pulsar_tb_freeze; pmac_tb_pulsar_addr = 0xd2; - printk(KERN_INFO "Timebase clock is Pulsar chip\n"); + name = "Pulsar"; } else if (device_is_compatible(cc, "cy28508")) { pmac_tb_freeze = smp_core99_cypress_tb_freeze; - printk(KERN_INFO "Timebase clock is Cypress chip\n"); + name = "Cypress"; } break; case 0xd4: pmac_tb_freeze = smp_core99_pulsar_tb_freeze; pmac_tb_pulsar_addr = 0xd4; - printk(KERN_INFO "Timebase clock is Pulsar chip\n"); + name = "Pulsar"; break; } - if (pmac_tb_freeze != NULL) { - pmac_tb_clock_chip_host = of_get_parent(cc); - of_node_put(cc); + if (pmac_tb_freeze != NULL) break; - } } - if (pmac_tb_freeze == NULL) { - smp_ops->give_timebase = smp_generic_give_timebase; - smp_ops->take_timebase = smp_generic_take_timebase; + if (pmac_tb_freeze != NULL) { + /* Open i2c bus for synchronous access */ + if (pmac_i2c_open(pmac_tb_clock_chip_host, 1)) { + printk(KERN_ERR "Failed top open i2c bus for clock" + " sync, fallback to software sync !\n"); + goto no_i2c_sync; + } + printk(KERN_INFO "Processor timebase sync using %s i2c clock\n", + name); + return; } + no_i2c_sync: + pmac_tb_freeze = NULL; + pmac_tb_clock_chip_host = NULL; } -/* nothing to do here, caches are already set up by service processor */ -static inline void __devinit core99_init_caches(int cpu) + + +/* + * Newer G5s uses a platform function + */ + +static void smp_core99_pfunc_tb_freeze(int freeze) { + struct device_node *cpus; + struct pmf_args args; + + cpus = of_find_node_by_path("/cpus"); + BUG_ON(cpus == NULL); + args.count = 1; + args.u[0].v = !freeze; + pmf_call_function(cpus, "cpu-timebase", &args); + of_node_put(cpus); } #else /* CONFIG_PPC64 */ /* - * SMP G4 powermacs use a GPIO to enable/disable the timebase. + * SMP G4 use a GPIO to enable/disable the timebase. */ static unsigned int core99_tb_gpio; /* Timebase freeze GPIO */ -static unsigned int pri_tb_hi, pri_tb_lo; -static unsigned int pri_tb_stamp; - -/* not __init, called in sleep/wakeup code */ -void smp_core99_give_timebase(void) +static void smp_core99_gpio_tb_freeze(int freeze) { - unsigned long flags; - unsigned int t; - - /* wait for the secondary to be in take_timebase */ - for (t = 100000; t > 0 && !sec_tb_reset; --t) - udelay(10); - if (!sec_tb_reset) { - printk(KERN_WARNING "Timeout waiting sync on second CPU\n"); - return; - } - - /* freeze the timebase and read it */ - /* disable interrupts so the timebase is disabled for the - shortest possible time */ - local_irq_save(flags); - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 4); + if (freeze) + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 4); + else + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 0); pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, core99_tb_gpio, 0); - mb(); - pri_tb_hi = get_tbu(); - pri_tb_lo = get_tbl(); - pri_tb_stamp = last_jiffy_stamp(smp_processor_id()); - mb(); - - /* tell the secondary we're ready */ - sec_tb_reset = 2; - mb(); - - /* wait for the secondary to have taken it */ - /* note: can't use udelay here, since it needs the timebase running */ - for (t = 10000000; t > 0 && sec_tb_reset; --t) - barrier(); - if (sec_tb_reset) - /* XXX BUG_ON here? */ - printk(KERN_WARNING "Timeout waiting sync(2) on second CPU\n"); - - /* Now, restart the timebase by leaving the GPIO to an open collector */ - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 0); - pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, core99_tb_gpio, 0); - local_irq_restore(flags); } -/* not __init, called in sleep/wakeup code */ -void smp_core99_take_timebase(void) -{ - unsigned long flags; - - /* tell the primary we're here */ - sec_tb_reset = 1; - mb(); - - /* wait for the primary to set pri_tb_hi/lo */ - while (sec_tb_reset < 2) - mb(); - - /* set our stuff the same as the primary */ - local_irq_save(flags); - set_dec(1); - set_tb(pri_tb_hi, pri_tb_lo); - last_jiffy_stamp(smp_processor_id()) = pri_tb_stamp; - mb(); - /* tell the primary we're done */ - sec_tb_reset = 0; - mb(); - local_irq_restore(flags); -} +#endif /* !CONFIG_PPC64 */ /* L2 and L3 cache settings to pass from CPU0 to CPU1 on G4 cpus */ volatile static long int core99_l2_cache; @@ -677,6 +649,7 @@ volatile static long int core99_l3_cache; static void __devinit core99_init_caches(int cpu) { +#ifndef CONFIG_PPC64 if (!cpu_has_feature(CPU_FTR_L2CR)) return; @@ -702,30 +675,76 @@ static void __devinit core99_init_caches(int cpu) _set_L3CR(core99_l3_cache); printk("CPU%d: L3CR set to %lx\n", cpu, core99_l3_cache); } +#endif /* !CONFIG_PPC64 */ } static void __init smp_core99_setup(int ncpus) { - struct device_node *cpu; - u32 *tbprop = NULL; - int i; +#ifdef CONFIG_PPC64 + + /* i2c based HW sync on some G5s */ + if (machine_is_compatible("PowerMac7,2") || + machine_is_compatible("PowerMac7,3") || + machine_is_compatible("RackMac3,1")) + smp_core99_setup_i2c_hwsync(ncpus); - core99_tb_gpio = KL_GPIO_TB_ENABLE; /* default value */ - cpu = of_find_node_by_type(NULL, "cpu"); - if (cpu != NULL) { - tbprop = (u32 *)get_property(cpu, "timebase-enable", NULL); - if (tbprop) - core99_tb_gpio = *tbprop; - of_node_put(cpu); + /* pfunc based HW sync on recent G5s */ + if (pmac_tb_freeze == NULL) { + struct device_node *cpus = + of_find_node_by_path("/cpus"); + if (cpus && + get_property(cpus, "platform-cpu-timebase", NULL)) { + pmac_tb_freeze = smp_core99_pfunc_tb_freeze; + printk(KERN_INFO "Processor timebase sync using" + " platform function\n"); + } } - /* XXX should get this from reg properties */ - for (i = 1; i < ncpus; ++i) - smp_hw_index[i] = i; - powersave_nap = 0; -} +#else /* CONFIG_PPC64 */ + + /* GPIO based HW sync on ppc32 Core99 */ + if (pmac_tb_freeze == NULL && !machine_is_compatible("MacRISC4")) { + struct device_node *cpu; + u32 *tbprop = NULL; + + core99_tb_gpio = KL_GPIO_TB_ENABLE; /* default value */ + cpu = of_find_node_by_type(NULL, "cpu"); + if (cpu != NULL) { + tbprop = (u32 *)get_property(cpu, "timebase-enable", + NULL); + if (tbprop) + core99_tb_gpio = *tbprop; + of_node_put(cpu); + } + pmac_tb_freeze = smp_core99_gpio_tb_freeze; + printk(KERN_INFO "Processor timebase sync using" + " GPIO 0x%02x\n", core99_tb_gpio); + } + +#endif /* CONFIG_PPC64 */ + + /* No timebase sync, fallback to software */ + if (pmac_tb_freeze == NULL) { + smp_ops->give_timebase = smp_generic_give_timebase; + smp_ops->take_timebase = smp_generic_take_timebase; + printk(KERN_INFO "Processor timebase sync using software\n"); + } + +#ifndef CONFIG_PPC64 + { + int i; + + /* XXX should get this from reg properties */ + for (i = 1; i < ncpus; ++i) + smp_hw_index[i] = i; + } #endif + /* 32 bits SMP can't NAP */ + if (!machine_is_compatible("MacRISC4")) + powersave_nap = 0; +} + static int __init smp_core99_probe(void) { struct device_node *cpus; @@ -743,8 +762,19 @@ static int __init smp_core99_probe(void) if (ncpus <= 1) return 1; + /* We need to perform some early initialisations before we can start + * setting up SMP as we are running before initcalls + */ + pmac_pfunc_base_install(); + pmac_i2c_init(); + + /* Setup various bits like timebase sync method, ability to nap, ... */ smp_core99_setup(ncpus); + + /* Install IPIs */ mpic_request_ipis(); + + /* Collect l2cr and l3cr values from CPU 0 */ core99_init_caches(0); return ncpus; @@ -753,14 +783,15 @@ static int __init smp_core99_probe(void) static void __devinit smp_core99_kick_cpu(int nr) { unsigned int save_vector; - unsigned long new_vector; - unsigned long flags; + unsigned long target, flags; volatile unsigned int *vector = ((volatile unsigned int *)(KERNELBASE+0x100)); if (nr < 0 || nr > 3) return; - if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu", 0x346); + + if (ppc_md.progress) + ppc_md.progress("smp_core99_kick_cpu", 0x346); local_irq_save(flags); local_irq_disable(); @@ -768,14 +799,11 @@ static void __devinit smp_core99_kick_cpu(int nr) /* Save reset vector */ save_vector = *vector; - /* Setup fake reset vector that does + /* Setup fake reset vector that does * b __secondary_start_pmac_0 + nr*8 - KERNELBASE */ - new_vector = (unsigned long) __secondary_start_pmac_0 + nr * 8; - *vector = 0x48000002 + new_vector - KERNELBASE; - - /* flush data cache and inval instruction cache */ - flush_icache_range((unsigned long) vector, (unsigned long) vector + 4); + target = (unsigned long) __secondary_start_pmac_0 + nr * 8; + create_branch((unsigned long)vector, target, BRANCH_SET_LINK); /* Put some life in our friend */ pmac_call_feature(PMAC_FTR_RESET_CPU, NULL, nr, 0); @@ -805,17 +833,25 @@ static void __devinit smp_core99_setup_cpu(int cpu_nr) mpic_setup_this_cpu(); if (cpu_nr == 0) { -#ifdef CONFIG_POWER4 +#ifdef CONFIG_PPC64 extern void g5_phy_disable_cpu1(void); + /* Close i2c bus if it was used for tb sync */ + if (pmac_tb_clock_chip_host) { + pmac_i2c_close(pmac_tb_clock_chip_host); + pmac_tb_clock_chip_host = NULL; + } + /* If we didn't start the second CPU, we must take * it off the bus */ if (machine_is_compatible("MacRISC4") && num_online_cpus() < 2) g5_phy_disable_cpu1(); -#endif /* CONFIG_POWER4 */ - if (ppc_md.progress) ppc_md.progress("core99_setup_cpu 0 done", 0x349); +#endif /* CONFIG_PPC64 */ + + if (ppc_md.progress) + ppc_md.progress("core99_setup_cpu 0 done", 0x349); } } diff --git a/arch/powerpc/platforms/powermac/time.c b/arch/powerpc/platforms/powermac/time.c index feb0a94..5d9afa1 100644 --- a/arch/powerpc/platforms/powermac/time.c +++ b/arch/powerpc/platforms/powermac/time.c @@ -258,15 +258,20 @@ int __init via_calibrate_decr(void) volatile unsigned char __iomem *via; int count = VIA_TIMER_FREQ_6 / 100; unsigned int dstart, dend; + struct resource rsrc; - vias = find_devices("via-cuda"); + vias = of_find_node_by_name(NULL, "via-cuda"); if (vias == 0) - vias = find_devices("via-pmu"); + vias = of_find_node_by_name(NULL, "via-pmu"); if (vias == 0) - vias = find_devices("via"); - if (vias == 0 || vias->n_addrs == 0) + vias = of_find_node_by_name(NULL, "via"); + if (vias == 0 || of_address_to_resource(vias, 0, &rsrc)) return 0; - via = ioremap(vias->addrs[0].address, vias->addrs[0].size); + via = ioremap(rsrc.start, rsrc.end - rsrc.start + 1); + if (via == NULL) { + printk(KERN_ERR "Failed to map VIA for timer calibration !\n"); + return 0; + } /* set timer 1 for continuous interrupts */ out_8(&via[ACR], (via[ACR] & ~T1MODE) | T1MODE_CONT); diff --git a/arch/powerpc/platforms/powermac/udbg_adb.c b/arch/powerpc/platforms/powermac/udbg_adb.c new file mode 100644 index 0000000..06c8265 --- /dev/null +++ b/arch/powerpc/platforms/powermac/udbg_adb.c @@ -0,0 +1,221 @@ +#include <linux/config.h> +#include <linux/string.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/bitops.h> +#include <linux/ptrace.h> +#include <linux/adb.h> +#include <linux/pmu.h> +#include <linux/cuda.h> +#include <asm/machdep.h> +#include <asm/io.h> +#include <asm/page.h> +#include <asm/xmon.h> +#include <asm/prom.h> +#include <asm/bootx.h> +#include <asm/machdep.h> +#include <asm/errno.h> +#include <asm/pmac_feature.h> +#include <asm/processor.h> +#include <asm/delay.h> +#include <asm/btext.h> +#include <asm/time.h> +#include <asm/udbg.h> + +/* + * This implementation is "special", it can "patch" the current + * udbg implementation and work on top of it. It must thus be + * initialized last + */ + +static void (*udbg_adb_old_putc)(char c); +static int (*udbg_adb_old_getc)(void); +static int (*udbg_adb_old_getc_poll)(void); + +static enum { + input_adb_none, + input_adb_pmu, + input_adb_cuda, +} input_type = input_adb_none; + +int xmon_wants_key, xmon_adb_keycode; + +static inline void udbg_adb_poll(void) +{ +#ifdef CONFIG_ADB_PMU + if (input_type == input_adb_pmu) + pmu_poll_adb(); +#endif /* CONFIG_ADB_PMU */ +#ifdef CONFIG_ADB_CUDA + if (input_type == input_adb_cuda) + cuda_poll(); +#endif /* CONFIG_ADB_CUDA */ +} + +#ifdef CONFIG_BOOTX_TEXT + +static int udbg_adb_use_btext; +static int xmon_adb_shiftstate; + +static unsigned char xmon_keytab[128] = + "asdfhgzxcv\000bqwer" /* 0x00 - 0x0f */ + "yt123465=97-80]o" /* 0x10 - 0x1f */ + "u[ip\rlj'k;\\,/nm." /* 0x20 - 0x2f */ + "\t `\177\0\033\0\0\0\0\0\0\0\0\0\0" /* 0x30 - 0x3f */ + "\0.\0*\0+\0\0\0\0\0/\r\0-\0" /* 0x40 - 0x4f */ + "\0\0000123456789\0\0\0"; /* 0x50 - 0x5f */ + +static unsigned char xmon_shift_keytab[128] = + "ASDFHGZXCV\000BQWER" /* 0x00 - 0x0f */ + "YT!@#$^%+(&_*)}O" /* 0x10 - 0x1f */ + "U{IP\rLJ\"K:|<?NM>" /* 0x20 - 0x2f */ + "\t ~\177\0\033\0\0\0\0\0\0\0\0\0\0" /* 0x30 - 0x3f */ + "\0.\0*\0+\0\0\0\0\0/\r\0-\0" /* 0x40 - 0x4f */ + "\0\0000123456789\0\0\0"; /* 0x50 - 0x5f */ + +static int udbg_adb_local_getc(void) +{ + int k, t, on; + + xmon_wants_key = 1; + for (;;) { + xmon_adb_keycode = -1; + t = 0; + on = 0; + k = -1; + do { + if (--t < 0) { + on = 1 - on; + btext_drawchar(on? 0xdb: 0x20); + btext_drawchar('\b'); + t = 200000; + } + udbg_adb_poll(); + if (udbg_adb_old_getc_poll) + k = udbg_adb_old_getc_poll(); + } while (k == -1 && xmon_adb_keycode == -1); + if (on) + btext_drawstring(" \b"); + if (k != -1) + return k; + k = xmon_adb_keycode; + + /* test for shift keys */ + if ((k & 0x7f) == 0x38 || (k & 0x7f) == 0x7b) { + xmon_adb_shiftstate = (k & 0x80) == 0; + continue; + } + if (k >= 0x80) + continue; /* ignore up transitions */ + k = (xmon_adb_shiftstate? xmon_shift_keytab: xmon_keytab)[k]; + if (k != 0) + break; + } + xmon_wants_key = 0; + return k; +} +#endif /* CONFIG_BOOTX_TEXT */ + +static int udbg_adb_getc(void) +{ +#ifdef CONFIG_BOOTX_TEXT + if (udbg_adb_use_btext && input_type != input_adb_none) + return udbg_adb_local_getc(); +#endif + if (udbg_adb_old_getc) + return udbg_adb_old_getc(); + return -1; +} + +/* getc_poll() is not really used, unless you have the xmon-over modem + * hack that doesn't quite concern us here, thus we just poll the low level + * ADB driver to prevent it from timing out and call back the original poll + * routine. + */ +static int udbg_adb_getc_poll(void) +{ + udbg_adb_poll(); + + if (udbg_adb_old_getc_poll) + return udbg_adb_old_getc_poll(); + return -1; +} + +static void udbg_adb_putc(char c) +{ +#ifdef CONFIG_BOOTX_TEXT + if (udbg_adb_use_btext) + btext_drawchar(c); +#endif + if (udbg_adb_old_putc) + return udbg_adb_old_putc(c); +} + +void udbg_adb_init_early(void) +{ +#ifdef CONFIG_BOOTX_TEXT + if (btext_find_display(1) == 0) { + udbg_adb_use_btext = 1; + udbg_putc = udbg_adb_putc; + } +#endif +} + +int udbg_adb_init(int force_btext) +{ + struct device_node *np; + + /* Capture existing callbacks */ + udbg_adb_old_putc = udbg_putc; + udbg_adb_old_getc = udbg_getc; + udbg_adb_old_getc_poll = udbg_getc_poll; + + /* Check if our early init was already called */ + if (udbg_adb_old_putc == udbg_adb_putc) + udbg_adb_old_putc = NULL; +#ifdef CONFIG_BOOTX_TEXT + if (udbg_adb_old_putc == btext_drawchar) + udbg_adb_old_putc = NULL; +#endif + + /* Set ours as output */ + udbg_putc = udbg_adb_putc; + udbg_getc = udbg_adb_getc; + udbg_getc_poll = udbg_adb_getc_poll; + +#ifdef CONFIG_BOOTX_TEXT + /* Check if we should use btext output */ + if (btext_find_display(force_btext) == 0) + udbg_adb_use_btext = 1; +#endif + + /* See if there is a keyboard in the device tree with a parent + * of type "adb". If not, we return a failure, but we keep the + * bext output set for now + */ + for (np = NULL; (np = of_find_node_by_name(np, "keyboard")) != NULL;) { + struct device_node *parent = of_get_parent(np); + int found = (parent && strcmp(parent->type, "adb") == 0); + of_node_put(parent); + if (found) + break; + } + if (np == NULL) + return -ENODEV; + of_node_put(np); + +#ifdef CONFIG_ADB_PMU + if (find_via_pmu()) + input_type = input_adb_pmu; +#endif +#ifdef CONFIG_ADB_CUDA + if (find_via_cuda()) + input_type = input_adb_cuda; +#endif + + /* Same as above: nothing found, keep btext set for output */ + if (input_type == input_adb_none) + return -ENODEV; + + return 0; +} diff --git a/arch/powerpc/kernel/udbg_scc.c b/arch/powerpc/platforms/powermac/udbg_scc.c index 820c535..e87d53a 100644 --- a/arch/powerpc/kernel/udbg_scc.c +++ b/arch/powerpc/platforms/powermac/udbg_scc.c @@ -25,7 +25,7 @@ extern void real_writeb(u8 data, volatile u8 __iomem *addr); static volatile u8 __iomem *sccc; static volatile u8 __iomem *sccd; -static void udbg_scc_putc(unsigned char c) +static void udbg_scc_putc(char c) { if (sccc) { while ((in_8(sccc) & SCC_TXRDY) == 0) @@ -47,14 +47,14 @@ static int udbg_scc_getc_poll(void) return -1; } -static unsigned char udbg_scc_getc(void) +static int udbg_scc_getc(void) { if (sccc) { while ((in_8(sccc) & SCC_RXRDY) == 0) ; return in_8(sccd); } - return 0; + return -1; } static unsigned char scc_inittab[] = { @@ -67,38 +67,59 @@ static unsigned char scc_inittab[] = { 3, 0xc1, /* rx enable, 8 bits */ }; -void udbg_init_scc(struct device_node *np) +void udbg_scc_init(int force_scc) { u32 *reg; unsigned long addr; + struct device_node *stdout = NULL, *escc = NULL, *macio = NULL; + struct device_node *ch, *ch_def = NULL, *ch_a = NULL; + char *path; int i, x; - if (np == NULL) - np = of_find_node_by_name(NULL, "escc"); - if (np == NULL || np->parent == NULL) - return; + escc = of_find_node_by_name(NULL, "escc"); + if (escc == NULL) + goto bail; + macio = of_get_parent(escc); + if (macio == NULL) + goto bail; + path = (char *)get_property(of_chosen, "linux,stdout-path", NULL); + if (path != NULL) + stdout = of_find_node_by_path(path); + for (ch = NULL; (ch = of_get_next_child(escc, ch)) != NULL;) { + if (ch == stdout) + ch_def = of_node_get(ch); + if (strcmp(ch->name, "ch-a") == 0) + ch_a = of_node_get(ch); + } + if (ch_def == NULL && !force_scc) + goto bail; + + ch = ch_def ? ch_def : ch_a; - udbg_printf("found SCC...\n"); /* Get address within mac-io ASIC */ - reg = (u32 *)get_property(np, "reg", NULL); + reg = (u32 *)get_property(escc, "reg", NULL); if (reg == NULL) - return; + goto bail; addr = reg[0]; - udbg_printf("local addr: %lx\n", addr); + /* Get address of mac-io PCI itself */ - reg = (u32 *)get_property(np->parent, "assigned-addresses", NULL); + reg = (u32 *)get_property(macio, "assigned-addresses", NULL); if (reg == NULL) - return; + goto bail; addr += reg[2]; - udbg_printf("final addr: %lx\n", addr); + + /* Lock the serial port */ + pmac_call_feature(PMAC_FTR_SCC_ENABLE, ch, + PMAC_SCC_ASYNC | PMAC_SCC_FLAG_XMON, 1); + /* Setup for 57600 8N1 */ - addr += 0x20; + if (ch == ch_a) + addr += 0x20; sccc = (volatile u8 * __iomem) ioremap(addr & PAGE_MASK, PAGE_SIZE) ; sccc += addr & ~PAGE_MASK; sccd = sccc + 0x10; - udbg_printf("ioremap result sccc: %p\n", sccc); mb(); for (i = 20000; i != 0; --i) @@ -113,9 +134,17 @@ void udbg_init_scc(struct device_node *np) udbg_getc_poll = udbg_scc_getc_poll; udbg_puts("Hello World !\n"); + + bail: + of_node_put(macio); + of_node_put(escc); + of_node_put(stdout); + of_node_put(ch_def); + of_node_put(ch_a); } -static void udbg_real_scc_putc(unsigned char c) +#ifdef CONFIG_PPC64 +static void udbg_real_scc_putc(char c) { while ((real_readb(sccc) & SCC_TXRDY) == 0) ; @@ -133,3 +162,4 @@ void udbg_init_pmac_realmode(void) udbg_getc = NULL; udbg_getc_poll = NULL; } +#endif /* CONFIG_PPC64 */ diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile index 06d5ef5..6accdd1 100644 --- a/arch/powerpc/platforms/pseries/Makefile +++ b/arch/powerpc/platforms/pseries/Makefile @@ -1,5 +1,5 @@ obj-y := pci.o lpar.o hvCall.o nvram.o reconfig.o \ - setup.o iommu.o ras.o rtasd.o + setup.o iommu.o ras.o rtasd.o pci_dlpar.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_IBMVIO) += vio.o obj-$(CONFIG_XICS) += xics.o diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index c8d2a40..7fbfd16 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -1093,6 +1093,15 @@ void eeh_add_device_early(struct device_node *dn) } EXPORT_SYMBOL_GPL(eeh_add_device_early); +void eeh_add_device_tree_early(struct device_node *dn) +{ + struct device_node *sib; + for (sib = dn->child; sib; sib = sib->sibling) + eeh_add_device_tree_early(sib); + eeh_add_device_early(dn); +} +EXPORT_SYMBOL_GPL(eeh_add_device_tree_early); + /** * eeh_add_device_late - perform EEH initialization for the indicated pci device * @dev: pci device for which to set up EEH @@ -1147,6 +1156,23 @@ void eeh_remove_device(struct pci_dev *dev) } EXPORT_SYMBOL_GPL(eeh_remove_device); +void eeh_remove_bus_device(struct pci_dev *dev) +{ + eeh_remove_device(dev); + if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) { + struct pci_bus *bus = dev->subordinate; + struct list_head *ln; + if (!bus) + return; + for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) { + struct pci_dev *pdev = pci_dev_b(ln); + if (pdev) + eeh_remove_bus_device(pdev); + } + } +} +EXPORT_SYMBOL_GPL(eeh_remove_bus_device); + static int proc_eeh_show(struct seq_file *m, void *v) { unsigned int cpu; diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index 2043659..169f914 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -436,7 +436,7 @@ static void iommu_bus_setup_pSeriesLP(struct pci_bus *bus) return; } - ppci = pdn->data; + ppci = PCI_DN(pdn); if (!ppci->iommu_table) { /* Bussubno hasn't been copied yet. * Do it now because iommu_table_setparms_lpar needs it. @@ -483,10 +483,10 @@ static void iommu_dev_setup_pSeries(struct pci_dev *dev) * an already allocated iommu table is found and use that. */ - while (dn && dn->data && PCI_DN(dn)->iommu_table == NULL) + while (dn && PCI_DN(dn) && PCI_DN(dn)->iommu_table == NULL) dn = dn->parent; - if (dn && dn->data) { + if (dn && PCI_DN(dn)) { PCI_DN(mydn)->iommu_table = PCI_DN(dn)->iommu_table; } else { DBG("iommu_dev_setup_pSeries, dev %p (%s) has no iommu table\n", dev, pci_name(dev)); @@ -497,7 +497,7 @@ static int iommu_reconfig_notifier(struct notifier_block *nb, unsigned long acti { int err = NOTIFY_OK; struct device_node *np = node; - struct pci_dn *pci = np->data; + struct pci_dn *pci = PCI_DN(np); switch (action) { case PSERIES_RECONFIG_REMOVE: @@ -533,7 +533,7 @@ static void iommu_dev_setup_pSeriesLP(struct pci_dev *dev) */ dn = pci_device_to_OF_node(dev); - for (pdn = dn; pdn && pdn->data && !PCI_DN(pdn)->iommu_table; + for (pdn = dn; pdn && PCI_DN(pdn) && !PCI_DN(pdn)->iommu_table; pdn = pdn->parent) { dma_window = (unsigned int *) get_property(pdn, "ibm,dma-window", NULL); @@ -552,7 +552,7 @@ static void iommu_dev_setup_pSeriesLP(struct pci_dev *dev) DBG("Found DMA window, allocating table\n"); } - pci = pdn->data; + pci = PCI_DN(pdn); if (!pci->iommu_table) { /* iommu_table_setparms_lpar needs bussubno. */ pci->bussubno = pci->phb->bus->number; diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index cf1bc11..1fe445a 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -24,6 +24,7 @@ #include <linux/config.h> #include <linux/kernel.h> #include <linux/dma-mapping.h> +#include <linux/console.h> #include <asm/processor.h> #include <asm/mmu.h> #include <asm/page.h> @@ -60,7 +61,7 @@ extern void pSeries_find_serial_port(void); int vtermno; /* virtual terminal# for udbg */ #define __ALIGNED__ __attribute__((__aligned__(sizeof(long)))) -static void udbg_hvsi_putc(unsigned char c) +static void udbg_hvsi_putc(char c) { /* packet's seqno isn't used anyways */ uint8_t packet[] __ALIGNED__ = { 0xff, 5, 0, 0, c }; @@ -111,7 +112,7 @@ static int udbg_hvsi_getc_poll(void) return ch; } -static unsigned char udbg_hvsi_getc(void) +static int udbg_hvsi_getc(void) { int ch; for (;;) { @@ -127,7 +128,7 @@ static unsigned char udbg_hvsi_getc(void) } } -static void udbg_putcLP(unsigned char c) +static void udbg_putcLP(char c) { char buf[16]; unsigned long rc; @@ -172,7 +173,7 @@ static int udbg_getc_pollLP(void) return ch; } -static unsigned char udbg_getcLP(void) +static int udbg_getcLP(void) { int ch; for (;;) { @@ -191,7 +192,7 @@ static unsigned char udbg_getcLP(void) /* call this from early_init() for a working debug console on * vterm capable LPAR machines */ -void udbg_init_debug_lpar(void) +void __init udbg_init_debug_lpar(void) { vtermno = 0; udbg_putc = udbg_putcLP; @@ -200,63 +201,54 @@ void udbg_init_debug_lpar(void) } /* returns 0 if couldn't find or use /chosen/stdout as console */ -int find_udbg_vterm(void) +void __init find_udbg_vterm(void) { struct device_node *stdout_node; u32 *termno; char *name; - int found = 0; + int add_console; /* find the boot console from /chosen/stdout */ if (!of_chosen) - return 0; + return; name = (char *)get_property(of_chosen, "linux,stdout-path", NULL); if (name == NULL) - return 0; + return; stdout_node = of_find_node_by_path(name); if (!stdout_node) - return 0; - - /* now we have the stdout node; figure out what type of device it is. */ + return; name = (char *)get_property(stdout_node, "name", NULL); if (!name) { printk(KERN_WARNING "stdout node missing 'name' property!\n"); goto out; } + /* The user has requested a console so this is already set up. */ + add_console = !strstr(cmd_line, "console="); - if (strncmp(name, "vty", 3) == 0) { - if (device_is_compatible(stdout_node, "hvterm1")) { - termno = (u32 *)get_property(stdout_node, "reg", NULL); - if (termno) { - vtermno = termno[0]; - udbg_putc = udbg_putcLP; - udbg_getc = udbg_getcLP; - udbg_getc_poll = udbg_getc_pollLP; - found = 1; - } - } else if (device_is_compatible(stdout_node, "hvterm-protocol")) { - termno = (u32 *)get_property(stdout_node, "reg", NULL); - if (termno) { - vtermno = termno[0]; - udbg_putc = udbg_hvsi_putc; - udbg_getc = udbg_hvsi_getc; - udbg_getc_poll = udbg_hvsi_getc_poll; - found = 1; - } - } - } else if (strncmp(name, "serial", 6)) { - /* XXX fix ISA serial console */ - printk(KERN_WARNING "serial stdout on LPAR ('%s')! " - "can't print udbg messages\n", - stdout_node->full_name); - } else { - printk(KERN_WARNING "don't know how to print to stdout '%s'\n", - stdout_node->full_name); + /* Check if it's a virtual terminal */ + if (strncmp(name, "vty", 3) != 0) + goto out; + termno = (u32 *)get_property(stdout_node, "reg", NULL); + if (termno == NULL) + goto out; + vtermno = termno[0]; + + if (device_is_compatible(stdout_node, "hvterm1")) { + udbg_putc = udbg_putcLP; + udbg_getc = udbg_getcLP; + udbg_getc_poll = udbg_getc_pollLP; + if (add_console) + add_preferred_console("hvc", termno[0] & 0xff, NULL); + } else if (device_is_compatible(stdout_node, "hvterm-protocol")) { + vtermno = termno[0]; + udbg_putc = udbg_hvsi_putc; + udbg_getc = udbg_hvsi_getc; + udbg_getc_poll = udbg_hvsi_getc_poll; + if (add_console) + add_preferred_console("hvsi", termno[0] & 0xff, NULL); } - out: of_node_put(stdout_node); - return found; } void vpa_init(int cpu) diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c new file mode 100644 index 0000000..2193478 --- /dev/null +++ b/arch/powerpc/platforms/pseries/pci_dlpar.c @@ -0,0 +1,174 @@ +/* + * PCI Dynamic LPAR, PCI Hot Plug and PCI EEH recovery code + * for RPA-compliant PPC64 platform. + * Copyright (C) 2003 Linda Xie <lxie@us.ibm.com> + * Copyright (C) 2005 International Business Machines + * + * Updates, 2005, John Rose <johnrose@austin.ibm.com> + * Updates, 2005, Linas Vepstas <linas@austin.ibm.com> + * + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/pci.h> +#include <asm/pci-bridge.h> + +static struct pci_bus * +find_bus_among_children(struct pci_bus *bus, + struct device_node *dn) +{ + struct pci_bus *child = NULL; + struct list_head *tmp; + struct device_node *busdn; + + busdn = pci_bus_to_OF_node(bus); + if (busdn == dn) + return bus; + + list_for_each(tmp, &bus->children) { + child = find_bus_among_children(pci_bus_b(tmp), dn); + if (child) + break; + }; + return child; +} + +struct pci_bus * +pcibios_find_pci_bus(struct device_node *dn) +{ + struct pci_dn *pdn = dn->data; + + if (!pdn || !pdn->phb || !pdn->phb->bus) + return NULL; + + return find_bus_among_children(pdn->phb->bus, dn); +} + +/** + * pcibios_remove_pci_devices - remove all devices under this bus + * + * Remove all of the PCI devices under this bus both from the + * linux pci device tree, and from the powerpc EEH address cache. + */ +void +pcibios_remove_pci_devices(struct pci_bus *bus) +{ + struct pci_dev *dev, *tmp; + + list_for_each_entry_safe(dev, tmp, &bus->devices, bus_list) { + eeh_remove_bus_device(dev); + pci_remove_bus_device(dev); + } +} + +/* Must be called before pci_bus_add_devices */ +void +pcibios_fixup_new_pci_devices(struct pci_bus *bus, int fix_bus) +{ + struct pci_dev *dev; + + list_for_each_entry(dev, &bus->devices, bus_list) { + /* + * Skip already-present devices (which are on the + * global device list.) + */ + if (list_empty(&dev->global_list)) { + int i; + + /* Need to setup IOMMU tables */ + ppc_md.iommu_dev_setup(dev); + + if(fix_bus) + pcibios_fixup_device_resources(dev, bus); + pci_read_irq_line(dev); + for (i = 0; i < PCI_NUM_RESOURCES; i++) { + struct resource *r = &dev->resource[i]; + + if (r->parent || !r->start || !r->flags) + continue; + pci_claim_resource(dev, i); + } + } + } +} + +static int +pcibios_pci_config_bridge(struct pci_dev *dev) +{ + u8 sec_busno; + struct pci_bus *child_bus; + struct pci_dev *child_dev; + + /* Get busno of downstream bus */ + pci_read_config_byte(dev, PCI_SECONDARY_BUS, &sec_busno); + + /* Add to children of PCI bridge dev->bus */ + child_bus = pci_add_new_bus(dev->bus, dev, sec_busno); + if (!child_bus) { + printk (KERN_ERR "%s: could not add second bus\n", __FUNCTION__); + return -EIO; + } + sprintf(child_bus->name, "PCI Bus #%02x", child_bus->number); + + pci_scan_child_bus(child_bus); + + list_for_each_entry(child_dev, &child_bus->devices, bus_list) { + eeh_add_device_late(child_dev); + } + + /* Fixup new pci devices without touching bus struct */ + pcibios_fixup_new_pci_devices(child_bus, 0); + + /* Make the discovered devices available */ + pci_bus_add_devices(child_bus); + return 0; +} + +/** + * pcibios_add_pci_devices - adds new pci devices to bus + * + * This routine will find and fixup new pci devices under + * the indicated bus. This routine presumes that there + * might already be some devices under this bridge, so + * it carefully tries to add only new devices. (And that + * is how this routine differs from other, similar pcibios + * routines.) + */ +void +pcibios_add_pci_devices(struct pci_bus * bus) +{ + int slotno, num; + struct pci_dev *dev; + struct device_node *dn = pci_bus_to_OF_node(bus); + + eeh_add_device_tree_early(dn); + + /* pci_scan_slot should find all children */ + slotno = PCI_SLOT(PCI_DN(dn->child)->devfn); + num = pci_scan_slot(bus, PCI_DEVFN(slotno, 0)); + if (num) { + pcibios_fixup_new_pci_devices(bus, 1); + pci_bus_add_devices(bus); + } + + list_for_each_entry(dev, &bus->devices, bus_list) { + eeh_add_device_late (dev); + if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) + pcibios_pci_config_bridge(dev); + } +} diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c index fbd214d..b046bcf 100644 --- a/arch/powerpc/platforms/pseries/ras.c +++ b/arch/powerpc/platforms/pseries/ras.c @@ -49,14 +49,14 @@ #include <asm/machdep.h> #include <asm/rtas.h> #include <asm/udbg.h> +#include <asm/firmware.h> + +#include "ras.h" static unsigned char ras_log_buf[RTAS_ERROR_LOG_MAX]; static DEFINE_SPINLOCK(ras_log_buf_lock); -char mce_data_buf[RTAS_ERROR_LOG_MAX] -; -/* This is true if we are using the firmware NMI handler (typically LPAR) */ -extern int fwnmi_active; +char mce_data_buf[RTAS_ERROR_LOG_MAX]; static int ras_get_sensor_state_token; static int ras_check_exception_token; @@ -280,7 +280,7 @@ static void fwnmi_release_errinfo(void) printk("FWNMI: nmi-interlock failed: %d\n", ret); } -void pSeries_system_reset_exception(struct pt_regs *regs) +int pSeries_system_reset_exception(struct pt_regs *regs) { if (fwnmi_active) { struct rtas_error_log *errhdr = fwnmi_get_errinfo(regs); @@ -289,6 +289,7 @@ void pSeries_system_reset_exception(struct pt_regs *regs) } fwnmi_release_errinfo(); } + return 0; /* need to perform reset */ } /* diff --git a/arch/powerpc/platforms/pseries/ras.h b/arch/powerpc/platforms/pseries/ras.h new file mode 100644 index 0000000..0e66b0d --- /dev/null +++ b/arch/powerpc/platforms/pseries/ras.h @@ -0,0 +1,9 @@ +#ifndef _PSERIES_RAS_H +#define _PSERIES_RAS_H + +struct pt_regs; + +extern int pSeries_system_reset_exception(struct pt_regs *regs); +extern int pSeries_machine_check_exception(struct pt_regs *regs); + +#endif /* _PSERIES_RAS_H */ diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 4a465f0..8903cf6 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -56,6 +56,7 @@ #include <asm/dma.h> #include <asm/machdep.h> #include <asm/irq.h> +#include <asm/kexec.h> #include <asm/time.h> #include <asm/nvram.h> #include "xics.h" @@ -68,6 +69,7 @@ #include <asm/smp.h> #include "plpar_wrappers.h" +#include "ras.h" #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) @@ -76,16 +78,9 @@ #endif extern void find_udbg_vterm(void); -extern void system_reset_fwnmi(void); /* from head.S */ -extern void machine_check_fwnmi(void); /* from head.S */ -extern void generic_find_legacy_serial_ports(u64 *physport, - unsigned int *default_speed); int fwnmi_active; /* TRUE if an FWNMI handler is present */ -extern void pSeries_system_reset_exception(struct pt_regs *regs); -extern int pSeries_machine_check_exception(struct pt_regs *regs); - static void pseries_shared_idle(void); static void pseries_dedicated_idle(void); @@ -105,18 +100,22 @@ void pSeries_show_cpuinfo(struct seq_file *m) /* Initialize firmware assisted non-maskable interrupts if * the firmware supports this feature. - * */ static void __init fwnmi_init(void) { - int ret; + unsigned long system_reset_addr, machine_check_addr; + int ibm_nmi_register = rtas_token("ibm,nmi-register"); if (ibm_nmi_register == RTAS_UNKNOWN_SERVICE) return; - ret = rtas_call(ibm_nmi_register, 2, 1, NULL, - __pa((unsigned long)system_reset_fwnmi), - __pa((unsigned long)machine_check_fwnmi)); - if (ret == 0) + + /* If the kernel's not linked at zero we point the firmware at low + * addresses anyway, and use a trampoline to get to the real code. */ + system_reset_addr = __pa(system_reset_fwnmi) - PHYSICAL_START; + machine_check_addr = __pa(machine_check_fwnmi) - PHYSICAL_START; + + if (0 == rtas_call(ibm_nmi_register, 2, 1, NULL, system_reset_addr, + machine_check_addr)) fwnmi_active = 1; } @@ -323,15 +322,18 @@ static void __init pSeries_discover_pic(void) ppc64_interrupt_controller = IC_INVALID; for (np = NULL; (np = of_find_node_by_name(np, "interrupt-controller"));) { typep = (char *)get_property(np, "compatible", NULL); - if (strstr(typep, "open-pic")) + if (strstr(typep, "open-pic")) { ppc64_interrupt_controller = IC_OPEN_PIC; - else if (strstr(typep, "ppc-xicp")) + break; + } else if (strstr(typep, "ppc-xicp")) { ppc64_interrupt_controller = IC_PPC_XIC; - else - printk("pSeries_discover_pic: failed to recognize" - " interrupt-controller\n"); - break; + break; + } } + if (ppc64_interrupt_controller == IC_INVALID) + printk("pSeries_discover_pic: failed to recognize" + " interrupt-controller\n"); + } static void pSeries_mach_cpu_die(void) @@ -365,10 +367,7 @@ static int pseries_set_xdabr(unsigned long dabr) */ static void __init pSeries_init_early(void) { - void *comport; int iommu_off = 0; - unsigned int default_speed; - u64 physport; DBG(" -> pSeries_init_early()\n"); @@ -382,17 +381,8 @@ static void __init pSeries_init_early(void) get_property(of_chosen, "linux,iommu-off", NULL)); } - generic_find_legacy_serial_ports(&physport, &default_speed); - if (platform_is_lpar()) find_udbg_vterm(); - else if (physport) { - /* Map the uart for udbg. */ - comport = (void *)ioremap(physport, 16); - udbg_init_uart(comport, default_speed); - - DBG("Hello World !\n"); - } if (firmware_has_feature(FW_FEATURE_DABR)) ppc_md.set_dabr = pseries_set_dabr; @@ -638,5 +628,8 @@ struct machdep_calls __initdata pSeries_md = { .machine_check_exception = pSeries_machine_check_exception, #ifdef CONFIG_KEXEC .kexec_cpu_down = pseries_kexec_cpu_down, + .machine_kexec = default_machine_kexec, + .machine_kexec_prepare = default_machine_kexec_prepare, + .machine_crash_shutdown = default_machine_crash_shutdown, #endif }; diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c index 0377dec..0c0cfa3 100644 --- a/arch/powerpc/platforms/pseries/xics.c +++ b/arch/powerpc/platforms/pseries/xics.c @@ -407,7 +407,7 @@ irqreturn_t xics_ipi_action(int irq, void *dev_id, struct pt_regs *regs) smp_message_recv(PPC_MSG_MIGRATE_TASK, regs); } #endif -#ifdef CONFIG_DEBUGGER +#if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC) if (test_and_clear_bit(PPC_MSG_DEBUGGER_BREAK, &xics_ipi_message[cpu].value)) { mb(); diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index 6b7efcfc..14b9abd 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -4,5 +4,6 @@ obj-$(CONFIG_PPC_I8259) += i8259.o obj-$(CONFIG_PPC_MPC106) += grackle.o obj-$(CONFIG_BOOKE) += dcr.o obj-$(CONFIG_40x) += dcr.o -obj-$(CONFIG_U3_DART) += u3_iommu.o +obj-$(CONFIG_U3_DART) += dart_iommu.o obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o +obj-$(CONFIG_83xx) += ipic.o diff --git a/arch/powerpc/sysdev/dart.h b/arch/powerpc/sysdev/dart.h index 33ed9ed..c2d0576 100644 --- a/arch/powerpc/sysdev/dart.h +++ b/arch/powerpc/sysdev/dart.h @@ -20,29 +20,44 @@ #define _POWERPC_SYSDEV_DART_H -/* physical base of DART registers */ -#define DART_BASE 0xf8033000UL - /* Offset from base to control register */ -#define DARTCNTL 0 +#define DART_CNTL 0 + /* Offset from base to exception register */ -#define DARTEXCP 0x10 +#define DART_EXCP_U3 0x10 /* Offset from base to TLB tag registers */ -#define DARTTAG 0x1000 +#define DART_TAGS_U3 0x1000 +/* U4 registers */ +#define DART_BASE_U4 0x10 +#define DART_SIZE_U4 0x20 +#define DART_EXCP_U4 0x30 +#define DART_TAGS_U4 0x1000 /* Control Register fields */ -/* base address of table (pfn) */ -#define DARTCNTL_BASE_MASK 0xfffff -#define DARTCNTL_BASE_SHIFT 12 +/* U3 registers */ +#define DART_CNTL_U3_BASE_MASK 0xfffff +#define DART_CNTL_U3_BASE_SHIFT 12 +#define DART_CNTL_U3_FLUSHTLB 0x400 +#define DART_CNTL_U3_ENABLE 0x200 +#define DART_CNTL_U3_SIZE_MASK 0x1ff +#define DART_CNTL_U3_SIZE_SHIFT 0 + +/* U4 registers */ +#define DART_BASE_U4_BASE_MASK 0xffffff +#define DART_BASE_U4_BASE_SHIFT 0 +#define DART_CNTL_U4_FLUSHTLB 0x20000000 +#define DART_CNTL_U4_ENABLE 0x80000000 +#define DART_SIZE_U4_SIZE_MASK 0x1fff +#define DART_SIZE_U4_SIZE_SHIFT 0 + +#define DART_REG(r) (dart + ((r) >> 2)) +#define DART_IN(r) (in_be32(DART_REG(r))) +#define DART_OUT(r,v) (out_be32(DART_REG(r), (v))) -#define DARTCNTL_FLUSHTLB 0x400 -#define DARTCNTL_ENABLE 0x200 /* size of table in pages */ -#define DARTCNTL_SIZE_MASK 0x1ff -#define DARTCNTL_SIZE_SHIFT 0 /* DART table fields */ diff --git a/arch/powerpc/sysdev/u3_iommu.c b/arch/powerpc/sysdev/dart_iommu.c index 5c1a26a..e00b46b 100644 --- a/arch/powerpc/sysdev/u3_iommu.c +++ b/arch/powerpc/sysdev/dart_iommu.c @@ -1,25 +1,27 @@ /* - * arch/powerpc/sysdev/u3_iommu.c + * arch/powerpc/sysdev/dart_iommu.c * * Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation + * Copyright (C) 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>, + * IBM Corporation * * Based on pSeries_iommu.c: * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation * Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation * - * Dynamic DMA mapping support, Apple U3 & IBM CPC925 "DART" iommu. + * Dynamic DMA mapping support, Apple U3, U4 & IBM CPC925 "DART" iommu. + * * - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * + * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * + * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA @@ -57,21 +59,22 @@ static unsigned long dart_tablesize; static u32 *dart_vbase; /* Mapped base address for the dart */ -static unsigned int *dart; +static unsigned int *__iomem dart; /* Dummy val that entries are set to when unused */ static unsigned int dart_emptyval; -static struct iommu_table iommu_table_u3; -static int iommu_table_u3_inited; +static struct iommu_table iommu_table_dart; +static int iommu_table_dart_inited; static int dart_dirty; +static int dart_is_u4; #define DBG(...) static inline void dart_tlb_invalidate_all(void) { unsigned long l = 0; - unsigned int reg; + unsigned int reg, inv_bit; unsigned long limit; DBG("dart: flush\n"); @@ -81,29 +84,28 @@ static inline void dart_tlb_invalidate_all(void) * * Gotcha: Sometimes, the DART won't detect that the bit gets * set. If so, clear it and set it again. - */ + */ limit = 0; + inv_bit = dart_is_u4 ? DART_CNTL_U4_FLUSHTLB : DART_CNTL_U3_FLUSHTLB; retry: - reg = in_be32((unsigned int *)dart+DARTCNTL); - reg |= DARTCNTL_FLUSHTLB; - out_be32((unsigned int *)dart+DARTCNTL, reg); - l = 0; - while ((in_be32((unsigned int *)dart+DARTCNTL) & DARTCNTL_FLUSHTLB) && - l < (1L<<limit)) { + reg = DART_IN(DART_CNTL); + reg |= inv_bit; + DART_OUT(DART_CNTL, reg); + + while ((DART_IN(DART_CNTL) & inv_bit) && l < (1L << limit)) l++; - } - if (l == (1L<<limit)) { + if (l == (1L << limit)) { if (limit < 4) { limit++; - reg = in_be32((unsigned int *)dart+DARTCNTL); - reg &= ~DARTCNTL_FLUSHTLB; - out_be32((unsigned int *)dart+DARTCNTL, reg); + reg = DART_IN(DART_CNTL); + reg &= ~inv_bit; + DART_OUT(DART_CNTL, reg); goto retry; } else - panic("U3-DART: TLB did not flush after waiting a long " + panic("DART: TLB did not flush after waiting a long " "time. Buggy U3 ?"); } } @@ -115,7 +117,7 @@ static void dart_flush(struct iommu_table *tbl) dart_dirty = 0; } -static void dart_build(struct iommu_table *tbl, long index, +static void dart_build(struct iommu_table *tbl, long index, long npages, unsigned long uaddr, enum dma_data_direction direction) { @@ -128,7 +130,7 @@ static void dart_build(struct iommu_table *tbl, long index, npages <<= DART_PAGE_FACTOR; dp = ((unsigned int*)tbl->it_base) + index; - + /* On U3, all memory is contigous, so we can move this * out of the loop. */ @@ -148,7 +150,7 @@ static void dart_build(struct iommu_table *tbl, long index, static void dart_free(struct iommu_table *tbl, long index, long npages) { unsigned int *dp; - + /* We don't worry about flushing the TLB cache. The only drawback of * not doing it is that we won't catch buggy device drivers doing * bad DMAs, but then no 32-bit architecture ever does either. @@ -160,7 +162,7 @@ static void dart_free(struct iommu_table *tbl, long index, long npages) npages <<= DART_PAGE_FACTOR; dp = ((unsigned int *)tbl->it_base) + index; - + while (npages--) *(dp++) = dart_emptyval; } @@ -168,20 +170,25 @@ static void dart_free(struct iommu_table *tbl, long index, long npages) static int dart_init(struct device_node *dart_node) { - unsigned int regword; unsigned int i; - unsigned long tmp; + unsigned long tmp, base, size; + struct resource r; if (dart_tablebase == 0 || dart_tablesize == 0) { - printk(KERN_INFO "U3-DART: table not allocated, using direct DMA\n"); + printk(KERN_INFO "DART: table not allocated, using " + "direct DMA\n"); return -ENODEV; } + if (of_address_to_resource(dart_node, 0, &r)) + panic("DART: can't get register base ! "); + /* Make sure nothing from the DART range remains in the CPU cache * from a previous mapping that existed before the kernel took * over */ - flush_dcache_phys_range(dart_tablebase, dart_tablebase + dart_tablesize); + flush_dcache_phys_range(dart_tablebase, + dart_tablebase + dart_tablesize); /* Allocate a spare page to map all invalid DART pages. We need to do * that to work around what looks like a problem with the HT bridge @@ -189,21 +196,16 @@ static int dart_init(struct device_node *dart_node) */ tmp = lmb_alloc(DART_PAGE_SIZE, DART_PAGE_SIZE); if (!tmp) - panic("U3-DART: Cannot allocate spare page!"); - dart_emptyval = DARTMAP_VALID | ((tmp >> DART_PAGE_SHIFT) & DARTMAP_RPNMASK); + panic("DART: Cannot allocate spare page!"); + dart_emptyval = DARTMAP_VALID | ((tmp >> DART_PAGE_SHIFT) & + DARTMAP_RPNMASK); - /* Map in DART registers. FIXME: Use device node to get base address */ - dart = ioremap(DART_BASE, 0x7000); + /* Map in DART registers */ + dart = ioremap(r.start, r.end - r.start + 1); if (dart == NULL) - panic("U3-DART: Cannot map registers!"); + panic("DART: Cannot map registers!"); - /* Set initial control register contents: table base, - * table size and enable bit - */ - regword = DARTCNTL_ENABLE | - ((dart_tablebase >> DART_PAGE_SHIFT) << DARTCNTL_BASE_SHIFT) | - (((dart_tablesize >> DART_PAGE_SHIFT) & DARTCNTL_SIZE_MASK) - << DARTCNTL_SIZE_SHIFT); + /* Map in DART table */ dart_vbase = ioremap(virt_to_abs(dart_tablebase), dart_tablesize); /* Fill initial table */ @@ -211,36 +213,50 @@ static int dart_init(struct device_node *dart_node) dart_vbase[i] = dart_emptyval; /* Initialize DART with table base and enable it. */ - out_be32((unsigned int *)dart, regword); + base = dart_tablebase >> DART_PAGE_SHIFT; + size = dart_tablesize >> DART_PAGE_SHIFT; + if (dart_is_u4) { + size &= DART_SIZE_U4_SIZE_MASK; + DART_OUT(DART_BASE_U4, base); + DART_OUT(DART_SIZE_U4, size); + DART_OUT(DART_CNTL, DART_CNTL_U4_ENABLE); + } else { + size &= DART_CNTL_U3_SIZE_MASK; + DART_OUT(DART_CNTL, + DART_CNTL_U3_ENABLE | + (base << DART_CNTL_U3_BASE_SHIFT) | + (size << DART_CNTL_U3_SIZE_SHIFT)); + } /* Invalidate DART to get rid of possible stale TLBs */ dart_tlb_invalidate_all(); - printk(KERN_INFO "U3/CPC925 DART IOMMU initialized\n"); + printk(KERN_INFO "DART IOMMU initialized for %s type chipset\n", + dart_is_u4 ? "U4" : "U3"); return 0; } -static void iommu_table_u3_setup(void) +static void iommu_table_dart_setup(void) { - iommu_table_u3.it_busno = 0; - iommu_table_u3.it_offset = 0; + iommu_table_dart.it_busno = 0; + iommu_table_dart.it_offset = 0; /* it_size is in number of entries */ - iommu_table_u3.it_size = (dart_tablesize / sizeof(u32)) >> DART_PAGE_FACTOR; + iommu_table_dart.it_size = (dart_tablesize / sizeof(u32)) >> DART_PAGE_FACTOR; /* Initialize the common IOMMU code */ - iommu_table_u3.it_base = (unsigned long)dart_vbase; - iommu_table_u3.it_index = 0; - iommu_table_u3.it_blocksize = 1; - iommu_init_table(&iommu_table_u3); + iommu_table_dart.it_base = (unsigned long)dart_vbase; + iommu_table_dart.it_index = 0; + iommu_table_dart.it_blocksize = 1; + iommu_init_table(&iommu_table_dart); /* Reserve the last page of the DART to avoid possible prefetch * past the DART mapped area */ - set_bit(iommu_table_u3.it_size - 1, iommu_table_u3.it_map); + set_bit(iommu_table_dart.it_size - 1, iommu_table_dart.it_map); } -static void iommu_dev_setup_u3(struct pci_dev *dev) +static void iommu_dev_setup_dart(struct pci_dev *dev) { struct device_node *dn; @@ -254,35 +270,39 @@ static void iommu_dev_setup_u3(struct pci_dev *dev) dn = pci_device_to_OF_node(dev); if (dn) - PCI_DN(dn)->iommu_table = &iommu_table_u3; + PCI_DN(dn)->iommu_table = &iommu_table_dart; } -static void iommu_bus_setup_u3(struct pci_bus *bus) +static void iommu_bus_setup_dart(struct pci_bus *bus) { struct device_node *dn; - if (!iommu_table_u3_inited) { - iommu_table_u3_inited = 1; - iommu_table_u3_setup(); + if (!iommu_table_dart_inited) { + iommu_table_dart_inited = 1; + iommu_table_dart_setup(); } dn = pci_bus_to_OF_node(bus); if (dn) - PCI_DN(dn)->iommu_table = &iommu_table_u3; + PCI_DN(dn)->iommu_table = &iommu_table_dart; } static void iommu_dev_setup_null(struct pci_dev *dev) { } static void iommu_bus_setup_null(struct pci_bus *bus) { } -void iommu_init_early_u3(void) +void iommu_init_early_dart(void) { struct device_node *dn; /* Find the DART in the device-tree */ dn = of_find_compatible_node(NULL, "dart", "u3-dart"); - if (dn == NULL) - return; + if (dn == NULL) { + dn = of_find_compatible_node(NULL, "dart", "u4-dart"); + if (dn == NULL) + goto bail; + dart_is_u4 = 1; + } /* Setup low level TCE operations for the core IOMMU code */ ppc_md.tce_build = dart_build; @@ -290,24 +310,27 @@ void iommu_init_early_u3(void) ppc_md.tce_flush = dart_flush; /* Initialize the DART HW */ - if (dart_init(dn)) { - /* If init failed, use direct iommu and null setup functions */ - ppc_md.iommu_dev_setup = iommu_dev_setup_null; - ppc_md.iommu_bus_setup = iommu_bus_setup_null; - - /* Setup pci_dma ops */ - pci_direct_iommu_init(); - } else { - ppc_md.iommu_dev_setup = iommu_dev_setup_u3; - ppc_md.iommu_bus_setup = iommu_bus_setup_u3; + if (dart_init(dn) == 0) { + ppc_md.iommu_dev_setup = iommu_dev_setup_dart; + ppc_md.iommu_bus_setup = iommu_bus_setup_dart; /* Setup pci_dma ops */ pci_iommu_init(); + + return; } + + bail: + /* If init failed, use direct iommu and null setup functions */ + ppc_md.iommu_dev_setup = iommu_dev_setup_null; + ppc_md.iommu_bus_setup = iommu_bus_setup_null; + + /* Setup pci_dma ops */ + pci_direct_iommu_init(); } -void __init alloc_u3_dart_table(void) +void __init alloc_dart_table(void) { /* Only reserve DART space if machine has more than 2GB of RAM * or if requested with iommu=on on cmdline. @@ -323,5 +346,5 @@ void __init alloc_u3_dart_table(void) dart_tablebase = (unsigned long) abs_to_virt(lmb_alloc_base(1UL<<24, 1UL<<24, 0x80000000L)); - printk(KERN_INFO "U3-DART allocated at: %lx\n", dart_tablebase); + printk(KERN_INFO "DART table allocated at: %lx\n", dart_tablebase); } diff --git a/arch/ppc/syslib/ipic.c b/arch/powerpc/sysdev/ipic.c index 8f01e0f..8f01e0f 100644 --- a/arch/ppc/syslib/ipic.c +++ b/arch/powerpc/sysdev/ipic.c diff --git a/arch/ppc/syslib/ipic.h b/arch/powerpc/sysdev/ipic.h index a7ce7da..a7ce7da 100644 --- a/arch/ppc/syslib/ipic.h +++ b/arch/powerpc/sysdev/ipic.h diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 58d1cc2..4f26304 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -13,6 +13,9 @@ */ #undef DEBUG +#undef DEBUG_IPI +#undef DEBUG_IRQ +#undef DEBUG_LOW #include <linux/config.h> #include <linux/types.h> @@ -45,7 +48,11 @@ static struct mpic *mpic_primary; static DEFINE_SPINLOCK(mpic_lock); #ifdef CONFIG_PPC32 /* XXX for now */ -#define distribute_irqs CONFIG_IRQ_ALL_CPUS +#ifdef CONFIG_IRQ_ALL_CPUS +#define distribute_irqs (1) +#else +#define distribute_irqs (0) +#endif #endif /* @@ -164,70 +171,129 @@ static void __init mpic_test_broken_ipi(struct mpic *mpic) /* Test if an interrupt is sourced from HyperTransport (used on broken U3s) * to force the edge setting on the MPIC and do the ack workaround. */ -static inline int mpic_is_ht_interrupt(struct mpic *mpic, unsigned int source_no) +static inline int mpic_is_ht_interrupt(struct mpic *mpic, unsigned int source) { - if (source_no >= 128 || !mpic->fixups) + if (source >= 128 || !mpic->fixups) return 0; - return mpic->fixups[source_no].base != NULL; + return mpic->fixups[source].base != NULL; } -static inline void mpic_apic_end_irq(struct mpic *mpic, unsigned int source_no) + +static inline void mpic_ht_end_irq(struct mpic *mpic, unsigned int source) { - struct mpic_irq_fixup *fixup = &mpic->fixups[source_no]; - u32 tmp; + struct mpic_irq_fixup *fixup = &mpic->fixups[source]; - spin_lock(&mpic->fixup_lock); - writeb(0x11 + 2 * fixup->irq, fixup->base); - tmp = readl(fixup->base + 2); - writel(tmp | 0x80000000ul, fixup->base + 2); - /* config writes shouldn't be posted but let's be safe ... */ - (void)readl(fixup->base + 2); - spin_unlock(&mpic->fixup_lock); + if (fixup->applebase) { + unsigned int soff = (fixup->index >> 3) & ~3; + unsigned int mask = 1U << (fixup->index & 0x1f); + writel(mask, fixup->applebase + soff); + } else { + spin_lock(&mpic->fixup_lock); + writeb(0x11 + 2 * fixup->index, fixup->base + 2); + writel(fixup->data, fixup->base + 4); + spin_unlock(&mpic->fixup_lock); + } } +static void mpic_startup_ht_interrupt(struct mpic *mpic, unsigned int source, + unsigned int irqflags) +{ + struct mpic_irq_fixup *fixup = &mpic->fixups[source]; + unsigned long flags; + u32 tmp; -static void __init mpic_amd8111_read_irq(struct mpic *mpic, u8 __iomem *devbase) + if (fixup->base == NULL) + return; + + DBG("startup_ht_interrupt(%u, %u) index: %d\n", + source, irqflags, fixup->index); + spin_lock_irqsave(&mpic->fixup_lock, flags); + /* Enable and configure */ + writeb(0x10 + 2 * fixup->index, fixup->base + 2); + tmp = readl(fixup->base + 4); + tmp &= ~(0x23U); + if (irqflags & IRQ_LEVEL) + tmp |= 0x22; + writel(tmp, fixup->base + 4); + spin_unlock_irqrestore(&mpic->fixup_lock, flags); +} + +static void mpic_shutdown_ht_interrupt(struct mpic *mpic, unsigned int source, + unsigned int irqflags) { - int i, irq; + struct mpic_irq_fixup *fixup = &mpic->fixups[source]; + unsigned long flags; u32 tmp; - printk(KERN_INFO "mpic: - Workarounds on AMD 8111 @ %p\n", devbase); + if (fixup->base == NULL) + return; - for (i=0; i < 24; i++) { - writeb(0x10 + 2*i, devbase + 0xf2); - tmp = readl(devbase + 0xf4); - if ((tmp & 0x1) || !(tmp & 0x20)) - continue; - irq = (tmp >> 16) & 0xff; - mpic->fixups[irq].irq = i; - mpic->fixups[irq].base = devbase + 0xf2; - } + DBG("shutdown_ht_interrupt(%u, %u)\n", source, irqflags); + + /* Disable */ + spin_lock_irqsave(&mpic->fixup_lock, flags); + writeb(0x10 + 2 * fixup->index, fixup->base + 2); + tmp = readl(fixup->base + 4); + tmp &= ~1U; + writel(tmp, fixup->base + 4); + spin_unlock_irqrestore(&mpic->fixup_lock, flags); } - -static void __init mpic_amd8131_read_irq(struct mpic *mpic, u8 __iomem *devbase) + +static void __init mpic_scan_ht_pic(struct mpic *mpic, u8 __iomem *devbase, + unsigned int devfn, u32 vdid) { - int i, irq; + int i, irq, n; + u8 __iomem *base; u32 tmp; + u8 pos; + + for (pos = readb(devbase + PCI_CAPABILITY_LIST); pos != 0; + pos = readb(devbase + pos + PCI_CAP_LIST_NEXT)) { + u8 id = readb(devbase + pos + PCI_CAP_LIST_ID); + if (id == PCI_CAP_ID_HT_IRQCONF) { + id = readb(devbase + pos + 3); + if (id == 0x80) + break; + } + } + if (pos == 0) + return; - printk(KERN_INFO "mpic: - Workarounds on AMD 8131 @ %p\n", devbase); + base = devbase + pos; + writeb(0x01, base + 2); + n = (readl(base + 4) >> 16) & 0xff; - for (i=0; i < 4; i++) { - writeb(0x10 + 2*i, devbase + 0xba); - tmp = readl(devbase + 0xbc); - if ((tmp & 0x1) || !(tmp & 0x20)) - continue; + printk(KERN_INFO "mpic: - HT:%02x.%x [0x%02x] vendor %04x device %04x" + " has %d irqs\n", + devfn >> 3, devfn & 0x7, pos, vdid & 0xffff, vdid >> 16, n + 1); + + for (i = 0; i <= n; i++) { + writeb(0x10 + 2 * i, base + 2); + tmp = readl(base + 4); irq = (tmp >> 16) & 0xff; - mpic->fixups[irq].irq = i; - mpic->fixups[irq].base = devbase + 0xba; + DBG("HT PIC index 0x%x, irq 0x%x, tmp: %08x\n", i, irq, tmp); + /* mask it , will be unmasked later */ + tmp |= 0x1; + writel(tmp, base + 4); + mpic->fixups[irq].index = i; + mpic->fixups[irq].base = base; + /* Apple HT PIC has a non-standard way of doing EOIs */ + if ((vdid & 0xffff) == 0x106b) + mpic->fixups[irq].applebase = devbase + 0x60; + else + mpic->fixups[irq].applebase = NULL; + writeb(0x11 + 2 * i, base + 2); + mpic->fixups[irq].data = readl(base + 4) | 0x80000000; } } -static void __init mpic_scan_ioapics(struct mpic *mpic) + +static void __init mpic_scan_ht_pics(struct mpic *mpic) { unsigned int devfn; u8 __iomem *cfgspace; - printk(KERN_INFO "mpic: Setting up IO-APICs workarounds for U3\n"); + printk(KERN_INFO "mpic: Setting up HT PICs workarounds for U3/U4\n"); /* Allocate fixups array */ mpic->fixups = alloc_bootmem(128 * sizeof(struct mpic_irq_fixup)); @@ -237,21 +303,20 @@ static void __init mpic_scan_ioapics(struct mpic *mpic) /* Init spinlock */ spin_lock_init(&mpic->fixup_lock); - /* Map u3 config space. We assume all IO-APICs are on the primary bus - * and slot will never be above "0xf" so we only need to map 32k + /* Map U3 config space. We assume all IO-APICs are on the primary bus + * so we only need to map 64kB. */ - cfgspace = (unsigned char __iomem *)ioremap(0xf2000000, 0x8000); + cfgspace = ioremap(0xf2000000, 0x10000); BUG_ON(cfgspace == NULL); - /* Now we scan all slots. We do a very quick scan, we read the header type, - * vendor ID and device ID only, that's plenty enough + /* Now we scan all slots. We do a very quick scan, we read the header + * type, vendor ID and device ID only, that's plenty enough */ - for (devfn = 0; devfn < PCI_DEVFN(0x10,0); devfn ++) { + for (devfn = 0; devfn < 0x100; devfn++) { u8 __iomem *devbase = cfgspace + (devfn << 8); u8 hdr_type = readb(devbase + PCI_HEADER_TYPE); u32 l = readl(devbase + PCI_VENDOR_ID); - u16 vendor_id, device_id; - int multifunc = 0; + u16 s; DBG("devfn %x, l: %x\n", devfn, l); @@ -259,22 +324,16 @@ static void __init mpic_scan_ioapics(struct mpic *mpic) if (l == 0xffffffff || l == 0x00000000 || l == 0x0000ffff || l == 0xffff0000) goto next; + /* Check if is supports capability lists */ + s = readw(devbase + PCI_STATUS); + if (!(s & PCI_STATUS_CAP_LIST)) + goto next; + + mpic_scan_ht_pic(mpic, devbase, devfn, l); - /* Check if it's a multifunction device (only really used - * to function 0 though - */ - multifunc = !!(hdr_type & 0x80); - vendor_id = l & 0xffff; - device_id = (l >> 16) & 0xffff; - - /* If a known device, go to fixup setup code */ - if (vendor_id == PCI_VENDOR_ID_AMD && device_id == 0x7460) - mpic_amd8111_read_irq(mpic, devbase); - if (vendor_id == PCI_VENDOR_ID_AMD && device_id == 0x7450) - mpic_amd8131_read_irq(mpic, devbase); next: /* next device, if function 0 */ - if ((PCI_FUNC(devfn) == 0) && !multifunc) + if (PCI_FUNC(devfn) == 0 && (hdr_type & 0x80) == 0) devfn += 7; } } @@ -371,6 +430,31 @@ static void mpic_enable_irq(unsigned int irq) break; } } while(mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) & MPIC_VECPRI_MASK); + +#ifdef CONFIG_MPIC_BROKEN_U3 + if (mpic->flags & MPIC_BROKEN_U3) { + unsigned int src = irq - mpic->irq_offset; + if (mpic_is_ht_interrupt(mpic, src) && + (irq_desc[irq].status & IRQ_LEVEL)) + mpic_ht_end_irq(mpic, src); + } +#endif /* CONFIG_MPIC_BROKEN_U3 */ +} + +static unsigned int mpic_startup_irq(unsigned int irq) +{ +#ifdef CONFIG_MPIC_BROKEN_U3 + struct mpic *mpic = mpic_from_irq(irq); + unsigned int src = irq - mpic->irq_offset; + + if (mpic_is_ht_interrupt(mpic, src)) + mpic_startup_ht_interrupt(mpic, src, irq_desc[irq].status); + +#endif /* CONFIG_MPIC_BROKEN_U3 */ + + mpic_enable_irq(irq); + + return 0; } static void mpic_disable_irq(unsigned int irq) @@ -394,12 +478,27 @@ static void mpic_disable_irq(unsigned int irq) } while(!(mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) & MPIC_VECPRI_MASK)); } +static void mpic_shutdown_irq(unsigned int irq) +{ +#ifdef CONFIG_MPIC_BROKEN_U3 + struct mpic *mpic = mpic_from_irq(irq); + unsigned int src = irq - mpic->irq_offset; + + if (mpic_is_ht_interrupt(mpic, src)) + mpic_shutdown_ht_interrupt(mpic, src, irq_desc[irq].status); + +#endif /* CONFIG_MPIC_BROKEN_U3 */ + + mpic_disable_irq(irq); +} + static void mpic_end_irq(unsigned int irq) { struct mpic *mpic = mpic_from_irq(irq); +#ifdef DEBUG_IRQ DBG("%s: end_irq: %d\n", mpic->name, irq); - +#endif /* We always EOI on end_irq() even for edge interrupts since that * should only lower the priority, the MPIC should have properly * latched another edge interrupt coming in anyway @@ -408,8 +507,9 @@ static void mpic_end_irq(unsigned int irq) #ifdef CONFIG_MPIC_BROKEN_U3 if (mpic->flags & MPIC_BROKEN_U3) { unsigned int src = irq - mpic->irq_offset; - if (mpic_is_ht_interrupt(mpic, src)) - mpic_apic_end_irq(mpic, src); + if (mpic_is_ht_interrupt(mpic, src) && + (irq_desc[irq].status & IRQ_LEVEL)) + mpic_ht_end_irq(mpic, src); } #endif /* CONFIG_MPIC_BROKEN_U3 */ @@ -490,6 +590,8 @@ struct mpic * __init mpic_alloc(unsigned long phys_addr, mpic->name = name; mpic->hc_irq.typename = name; + mpic->hc_irq.startup = mpic_startup_irq; + mpic->hc_irq.shutdown = mpic_shutdown_irq; mpic->hc_irq.enable = mpic_enable_irq; mpic->hc_irq.disable = mpic_disable_irq; mpic->hc_irq.end = mpic_end_irq; @@ -658,10 +760,10 @@ void __init mpic_init(struct mpic *mpic) mpic->irq_count = mpic->num_sources; #ifdef CONFIG_MPIC_BROKEN_U3 - /* Do the ioapic fixups on U3 broken mpic */ + /* Do the HT PIC fixups on U3 broken mpic */ DBG("MPIC flags: %x\n", mpic->flags); if ((mpic->flags & MPIC_BROKEN_U3) && (mpic->flags & MPIC_PRIMARY)) - mpic_scan_ioapics(mpic); + mpic_scan_ht_pics(mpic); #endif /* CONFIG_MPIC_BROKEN_U3 */ for (i = 0; i < mpic->num_sources; i++) { @@ -848,7 +950,9 @@ void mpic_send_ipi(unsigned int ipi_no, unsigned int cpu_mask) BUG_ON(mpic == NULL); +#ifdef DEBUG_IPI DBG("%s: send_ipi(ipi_no: %d)\n", mpic->name, ipi_no); +#endif mpic_cpu_write(MPIC_CPU_IPI_DISPATCH_0 + ipi_no * 0x10, mpic_physmask(cpu_mask & cpus_addr(cpu_online_map)[0])); @@ -859,19 +963,28 @@ int mpic_get_one_irq(struct mpic *mpic, struct pt_regs *regs) u32 irq; irq = mpic_cpu_read(MPIC_CPU_INTACK) & MPIC_VECPRI_VECTOR_MASK; +#ifdef DEBUG_LOW DBG("%s: get_one_irq(): %d\n", mpic->name, irq); - +#endif if (mpic->cascade && irq == mpic->cascade_vec) { +#ifdef DEBUG_LOW DBG("%s: cascading ...\n", mpic->name); +#endif irq = mpic->cascade(regs, mpic->cascade_data); mpic_eoi(mpic); return irq; } if (unlikely(irq == MPIC_VEC_SPURRIOUS)) return -1; - if (irq < MPIC_VEC_IPI_0) + if (irq < MPIC_VEC_IPI_0) { +#ifdef DEBUG_IRQ + DBG("%s: irq %d\n", mpic->name, irq + mpic->irq_offset); +#endif return irq + mpic->irq_offset; + } +#ifdef DEBUG_IPI DBG("%s: ipi %d !\n", mpic->name, irq - MPIC_VEC_IPI_0); +#endif return irq - MPIC_VEC_IPI_0 + mpic->ipi_offset; } diff --git a/arch/powerpc/xmon/Makefile b/arch/powerpc/xmon/Makefile index b20312e..109d874 100644 --- a/arch/powerpc/xmon/Makefile +++ b/arch/powerpc/xmon/Makefile @@ -3,9 +3,5 @@ ifdef CONFIG_PPC64 EXTRA_CFLAGS += -mno-minimal-toc endif - -obj-$(CONFIG_8xx) += start_8xx.o -obj-$(CONFIG_6xx) += start_32.o -obj-$(CONFIG_4xx) += start_32.o -obj-$(CONFIG_PPC64) += start_64.o -obj-y += xmon.o ppc-dis.o ppc-opc.o setjmp.o nonstdio.o +obj-y += xmon.o ppc-dis.o ppc-opc.o setjmp.o start.o \ + nonstdio.o diff --git a/arch/powerpc/xmon/start_64.c b/arch/powerpc/xmon/start.c index 712552c..712552c 100644 --- a/arch/powerpc/xmon/start_64.c +++ b/arch/powerpc/xmon/start.c diff --git a/arch/powerpc/xmon/start_32.c b/arch/powerpc/xmon/start_32.c deleted file mode 100644 index c2464df..0000000 --- a/arch/powerpc/xmon/start_32.c +++ /dev/null @@ -1,441 +0,0 @@ -/* - * Copyright (C) 1996 Paul Mackerras. - */ -#include <linux/config.h> -#include <linux/string.h> -#include <asm/machdep.h> -#include <asm/io.h> -#include <asm/page.h> -#include <linux/adb.h> -#include <linux/pmu.h> -#include <linux/cuda.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/bitops.h> -#include <asm/xmon.h> -#include <asm/prom.h> -#include <asm/bootx.h> -#include <asm/machdep.h> -#include <asm/errno.h> -#include <asm/pmac_feature.h> -#include <asm/processor.h> -#include <asm/delay.h> -#include <asm/btext.h> -#include <asm/time.h> -#include "nonstdio.h" - -static volatile unsigned char __iomem *sccc, *sccd; -unsigned int TXRDY, RXRDY, DLAB; - -static int use_serial; -static int use_screen; -static int via_modem; -static int xmon_use_sccb; -static struct device_node *channel_node; - -void buf_access(void) -{ - if (DLAB) - sccd[3] &= ~DLAB; /* reset DLAB */ -} - -extern int adb_init(void); - -#ifdef CONFIG_PPC_CHRP -/* - * This looks in the "ranges" property for the primary PCI host bridge - * to find the physical address of the start of PCI/ISA I/O space. - * It is basically a cut-down version of pci_process_bridge_OF_ranges. - */ -static unsigned long chrp_find_phys_io_base(void) -{ - struct device_node *node; - unsigned int *ranges; - unsigned long base = CHRP_ISA_IO_BASE; - int rlen = 0; - int np; - - node = find_devices("isa"); - if (node != NULL) { - node = node->parent; - if (node == NULL || node->type == NULL - || strcmp(node->type, "pci") != 0) - node = NULL; - } - if (node == NULL) - node = find_devices("pci"); - if (node == NULL) - return base; - - ranges = (unsigned int *) get_property(node, "ranges", &rlen); - np = prom_n_addr_cells(node) + 5; - while ((rlen -= np * sizeof(unsigned int)) >= 0) { - if ((ranges[0] >> 24) == 1 && ranges[2] == 0) { - /* I/O space starting at 0, grab the phys base */ - base = ranges[np - 3]; - break; - } - ranges += np; - } - return base; -} -#endif /* CONFIG_PPC_CHRP */ - -void xmon_map_scc(void) -{ -#ifdef CONFIG_PPC_MULTIPLATFORM - volatile unsigned char __iomem *base; - - if (_machine == _MACH_Pmac) { - struct device_node *np; - unsigned long addr; -#ifdef CONFIG_BOOTX_TEXT - if (!use_screen && !use_serial - && !machine_is_compatible("iMac")) { - /* see if there is a keyboard in the device tree - with a parent of type "adb" */ - for (np = find_devices("keyboard"); np; np = np->next) - if (np->parent && np->parent->type - && strcmp(np->parent->type, "adb") == 0) - break; - - /* needs to be hacked if xmon_printk is to be used - from within find_via_pmu() */ -#ifdef CONFIG_ADB_PMU - if (np != NULL && boot_text_mapped && find_via_pmu()) - use_screen = 1; -#endif -#ifdef CONFIG_ADB_CUDA - if (np != NULL && boot_text_mapped && find_via_cuda()) - use_screen = 1; -#endif - } - if (!use_screen && (np = find_devices("escc")) != NULL) { - /* - * look for the device node for the serial port - * we're using and see if it says it has a modem - */ - char *name = xmon_use_sccb? "ch-b": "ch-a"; - char *slots; - int l; - - np = np->child; - while (np != NULL && strcmp(np->name, name) != 0) - np = np->sibling; - if (np != NULL) { - /* XXX should parse this properly */ - channel_node = np; - slots = get_property(np, "slot-names", &l); - if (slots != NULL && l >= 10 - && strcmp(slots+4, "Modem") == 0) - via_modem = 1; - } - } - btext_drawstring("xmon uses "); - if (use_screen) - btext_drawstring("screen and keyboard\n"); - else { - if (via_modem) - btext_drawstring("modem on "); - btext_drawstring(xmon_use_sccb? "printer": "modem"); - btext_drawstring(" port\n"); - } - -#endif /* CONFIG_BOOTX_TEXT */ - -#ifdef CHRP_ESCC - addr = 0xc1013020; -#else - addr = 0xf3013020; -#endif - TXRDY = 4; - RXRDY = 1; - - np = find_devices("mac-io"); - if (np && np->n_addrs) - addr = np->addrs[0].address + 0x13020; - base = (volatile unsigned char *) ioremap(addr & PAGE_MASK, PAGE_SIZE); - sccc = base + (addr & ~PAGE_MASK); - sccd = sccc + 0x10; - - } else { - base = (volatile unsigned char *) isa_io_base; - -#ifdef CONFIG_PPC_CHRP - if (_machine == _MACH_chrp) - base = (volatile unsigned char __iomem *) - ioremap(chrp_find_phys_io_base(), 0x1000); -#endif - - sccc = base + 0x3fd; - sccd = base + 0x3f8; - if (xmon_use_sccb) { - sccc -= 0x100; - sccd -= 0x100; - } - TXRDY = 0x20; - RXRDY = 1; - DLAB = 0x80; - } -#elif defined(CONFIG_GEMINI) - /* should already be mapped by the kernel boot */ - sccc = (volatile unsigned char __iomem *) 0xffeffb0d; - sccd = (volatile unsigned char __iomem *) 0xffeffb08; - TXRDY = 0x20; - RXRDY = 1; - DLAB = 0x80; -#elif defined(CONFIG_405GP) - sccc = (volatile unsigned char __iomem *)0xef600305; - sccd = (volatile unsigned char __iomem *)0xef600300; - TXRDY = 0x20; - RXRDY = 1; - DLAB = 0x80; -#endif /* platform */ -} - -static int scc_initialized = 0; - -void xmon_init_scc(void); -extern void cuda_poll(void); - -static inline void do_poll_adb(void) -{ -#ifdef CONFIG_ADB_PMU - if (sys_ctrler == SYS_CTRLER_PMU) - pmu_poll_adb(); -#endif /* CONFIG_ADB_PMU */ -#ifdef CONFIG_ADB_CUDA - if (sys_ctrler == SYS_CTRLER_CUDA) - cuda_poll(); -#endif /* CONFIG_ADB_CUDA */ -} - -int xmon_write(void *ptr, int nb) -{ - char *p = ptr; - int i, c, ct; - -#ifdef CONFIG_SMP - static unsigned long xmon_write_lock; - int lock_wait = 1000000; - int locked; - - while ((locked = test_and_set_bit(0, &xmon_write_lock)) != 0) - if (--lock_wait == 0) - break; -#endif - -#ifdef CONFIG_BOOTX_TEXT - if (use_screen) { - /* write it on the screen */ - for (i = 0; i < nb; ++i) - btext_drawchar(*p++); - goto out; - } -#endif - if (!scc_initialized) - xmon_init_scc(); - ct = 0; - for (i = 0; i < nb; ++i) { - while ((*sccc & TXRDY) == 0) - do_poll_adb(); - c = p[i]; - if (c == '\n' && !ct) { - c = '\r'; - ct = 1; - --i; - } else { - ct = 0; - } - buf_access(); - *sccd = c; - eieio(); - } - - out: -#ifdef CONFIG_SMP - if (!locked) - clear_bit(0, &xmon_write_lock); -#endif - return nb; -} - -int xmon_wants_key; -int xmon_adb_keycode; - -#ifdef CONFIG_BOOTX_TEXT -static int xmon_adb_shiftstate; - -static unsigned char xmon_keytab[128] = - "asdfhgzxcv\000bqwer" /* 0x00 - 0x0f */ - "yt123465=97-80]o" /* 0x10 - 0x1f */ - "u[ip\rlj'k;\\,/nm." /* 0x20 - 0x2f */ - "\t `\177\0\033\0\0\0\0\0\0\0\0\0\0" /* 0x30 - 0x3f */ - "\0.\0*\0+\0\0\0\0\0/\r\0-\0" /* 0x40 - 0x4f */ - "\0\0000123456789\0\0\0"; /* 0x50 - 0x5f */ - -static unsigned char xmon_shift_keytab[128] = - "ASDFHGZXCV\000BQWER" /* 0x00 - 0x0f */ - "YT!@#$^%+(&_*)}O" /* 0x10 - 0x1f */ - "U{IP\rLJ\"K:|<?NM>" /* 0x20 - 0x2f */ - "\t ~\177\0\033\0\0\0\0\0\0\0\0\0\0" /* 0x30 - 0x3f */ - "\0.\0*\0+\0\0\0\0\0/\r\0-\0" /* 0x40 - 0x4f */ - "\0\0000123456789\0\0\0"; /* 0x50 - 0x5f */ - -static int xmon_get_adb_key(void) -{ - int k, t, on; - - xmon_wants_key = 1; - for (;;) { - xmon_adb_keycode = -1; - t = 0; - on = 0; - do { - if (--t < 0) { - on = 1 - on; - btext_drawchar(on? 0xdb: 0x20); - btext_drawchar('\b'); - t = 200000; - } - do_poll_adb(); - } while (xmon_adb_keycode == -1); - k = xmon_adb_keycode; - if (on) - btext_drawstring(" \b"); - - /* test for shift keys */ - if ((k & 0x7f) == 0x38 || (k & 0x7f) == 0x7b) { - xmon_adb_shiftstate = (k & 0x80) == 0; - continue; - } - if (k >= 0x80) - continue; /* ignore up transitions */ - k = (xmon_adb_shiftstate? xmon_shift_keytab: xmon_keytab)[k]; - if (k != 0) - break; - } - xmon_wants_key = 0; - return k; -} -#endif /* CONFIG_BOOTX_TEXT */ - -int xmon_readchar(void) -{ -#ifdef CONFIG_BOOTX_TEXT - if (use_screen) - return xmon_get_adb_key(); -#endif - if (!scc_initialized) - xmon_init_scc(); - while ((*sccc & RXRDY) == 0) - do_poll_adb(); - buf_access(); - return *sccd; -} - -int xmon_read_poll(void) -{ - if ((*sccc & RXRDY) == 0) { - do_poll_adb(); - return -1; - } - buf_access(); - return *sccd; -} - -static unsigned char scc_inittab[] = { - 13, 0, /* set baud rate divisor */ - 12, 1, - 14, 1, /* baud rate gen enable, src=rtxc */ - 11, 0x50, /* clocks = br gen */ - 5, 0xea, /* tx 8 bits, assert DTR & RTS */ - 4, 0x46, /* x16 clock, 1 stop */ - 3, 0xc1, /* rx enable, 8 bits */ -}; - -void xmon_init_scc(void) -{ - if ( _machine == _MACH_chrp ) - { - sccd[3] = 0x83; eieio(); /* LCR = 8N1 + DLAB */ - sccd[0] = 12; eieio(); /* DLL = 9600 baud */ - sccd[1] = 0; eieio(); - sccd[2] = 0; eieio(); /* FCR = 0 */ - sccd[3] = 3; eieio(); /* LCR = 8N1 */ - sccd[1] = 0; eieio(); /* IER = 0 */ - } - else if ( _machine == _MACH_Pmac ) - { - int i, x; - unsigned long timeout; - - if (channel_node != 0) - pmac_call_feature( - PMAC_FTR_SCC_ENABLE, - channel_node, - PMAC_SCC_ASYNC | PMAC_SCC_FLAG_XMON, 1); - printk(KERN_INFO "Serial port locked ON by debugger !\n"); - if (via_modem && channel_node != 0) { - unsigned int t0; - - pmac_call_feature( - PMAC_FTR_MODEM_ENABLE, - channel_node, 0, 1); - printk(KERN_INFO "Modem powered up by debugger !\n"); - t0 = get_tbl(); - timeout = 3 * tb_ticks_per_sec; - if (timeout == 0) - /* assume 25MHz if tb_ticks_per_sec not set */ - timeout = 75000000; - while (get_tbl() - t0 < timeout) - eieio(); - } - /* use the B channel if requested */ - if (xmon_use_sccb) { - sccc = (volatile unsigned char *) - ((unsigned long)sccc & ~0x20); - sccd = sccc + 0x10; - } - for (i = 20000; i != 0; --i) { - x = *sccc; eieio(); - } - *sccc = 9; eieio(); /* reset A or B side */ - *sccc = ((unsigned long)sccc & 0x20)? 0x80: 0x40; eieio(); - for (i = 0; i < sizeof(scc_inittab); ++i) { - *sccc = scc_inittab[i]; - eieio(); - } - } - scc_initialized = 1; - if (via_modem) { - for (;;) { - xmon_write("ATE1V1\r", 7); - if (xmon_expect("OK", 5)) { - xmon_write("ATA\r", 4); - if (xmon_expect("CONNECT", 40)) - break; - } - xmon_write("+++", 3); - xmon_expect("OK", 3); - } - } -} - -void xmon_enter(void) -{ -#ifdef CONFIG_ADB_PMU - if (_machine == _MACH_Pmac) { - pmu_suspend(); - } -#endif -} - -void xmon_leave(void) -{ -#ifdef CONFIG_ADB_PMU - if (_machine == _MACH_Pmac) { - pmu_resume(); - } -#endif -} diff --git a/arch/powerpc/xmon/start_8xx.c b/arch/powerpc/xmon/start_8xx.c deleted file mode 100644 index 4c17b04..0000000 --- a/arch/powerpc/xmon/start_8xx.c +++ /dev/null @@ -1,44 +0,0 @@ -/* - * Copyright (C) 1996 Paul Mackerras. - * Copyright (C) 2000 Dan Malek. - * Quick hack of Paul's code to make XMON work on 8xx processors. Lots - * of assumptions, like the SMC1 is used, it has been initialized by the - * loader at some point, and we can just stuff and suck bytes. - * We rely upon the 8xx uart driver to support us, as the interface - * changes between boot up and operational phases of the kernel. - */ -#include <linux/string.h> -#include <asm/machdep.h> -#include <asm/io.h> -#include <asm/page.h> -#include <linux/kernel.h> -#include <asm/8xx_immap.h> -#include <asm/mpc8xx.h> -#include <asm/commproc.h> -#include "nonstdio.h" - -extern int xmon_8xx_write(char *str, int nb); -extern int xmon_8xx_read_poll(void); -extern int xmon_8xx_read_char(void); - -void xmon_map_scc(void) -{ - cpmp = (cpm8xx_t *)&(((immap_t *)IMAP_ADDR)->im_cpm); -} - -void xmon_init_scc(void); - -int xmon_write(void *ptr, int nb) -{ - return(xmon_8xx_write(ptr, nb)); -} - -int xmon_readchar(void) -{ - return xmon_8xx_read_char(); -} - -int xmon_read_poll(void) -{ - return(xmon_8xx_read_poll()); -} diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index c45a6ad..22612ed 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -450,7 +450,6 @@ int xmon_core(struct pt_regs *regs, int fromipi) leave: cpu_clear(cpu, cpus_in_xmon); xmon_fault_jmp[cpu] = NULL; - #else /* UP is simple... */ if (in_xmon) { @@ -805,7 +804,10 @@ cmds(struct pt_regs *excp) break; case 'x': case 'X': + return cmd; case EOF: + printf(" <no input ...>\n"); + mdelay(2000); return cmd; case '?': printf(help_string); @@ -1011,7 +1013,7 @@ static long check_bp_loc(unsigned long addr) unsigned int instr; addr &= ~3; - if (addr < KERNELBASE) { + if (!is_kernel_addr(addr)) { printf("Breakpoints may only be placed at kernel addresses\n"); return 0; } @@ -1062,7 +1064,7 @@ bpt_cmds(void) dabr.address = 0; dabr.enabled = 0; if (scanhex(&dabr.address)) { - if (dabr.address < KERNELBASE) { + if (!is_kernel_addr(dabr.address)) { printf(badaddr); break; } diff --git a/arch/ppc/boot/common/util.S b/arch/ppc/boot/common/util.S index c96c9f8..368ec03 100644 --- a/arch/ppc/boot/common/util.S +++ b/arch/ppc/boot/common/util.S @@ -234,7 +234,8 @@ udelay: * First, flush the data cache in case it was enabled and may be * holding instructions for copy back. */ -_GLOBAL(flush_instruction_cache) + .globl flush_instruction_cache +flush_instruction_cache: mflr r6 bl flush_data_cache @@ -279,7 +280,8 @@ _GLOBAL(flush_instruction_cache) * Flush data cache * Do this by just reading lots of stuff into the cache. */ -_GLOBAL(flush_data_cache) + .globl flush_data_cache +flush_data_cache: lis r3,cache_flush_buffer@h ori r3,r3,cache_flush_buffer@l li r4,NUM_CACHE_LINES diff --git a/arch/ppc/boot/images/Makefile b/arch/ppc/boot/images/Makefile index 532e7ef..58415d5 100644 --- a/arch/ppc/boot/images/Makefile +++ b/arch/ppc/boot/images/Makefile @@ -26,7 +26,7 @@ quiet_cmd_uimage = UIMAGE $@ targets += uImage $(obj)/uImage: $(obj)/vmlinux.gz $(Q)rm -f $@ - $(call if_changed,uimage) + $(call cmd,uimage) @echo -n ' Image: $@ ' @if [ -f $@ ]; then echo 'is ready' ; else echo 'not made'; fi diff --git a/arch/ppc/configs/TQM8540_defconfig b/arch/ppc/configs/TQM8540_defconfig new file mode 100644 index 0000000..99bf3b7 --- /dev/null +++ b/arch/ppc/configs/TQM8540_defconfig @@ -0,0 +1,973 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.15-rc2 +# Fri Nov 25 17:26:50 2005 +# +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_PPC=y +CONFIG_PPC32=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_HOTPLUG is not set +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_EMBEDDED=y +# CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +# CONFIG_EPOLL is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# Processor +# +# CONFIG_6xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_POWER3 is not set +# CONFIG_POWER4 is not set +# CONFIG_8xx is not set +# CONFIG_E200 is not set +CONFIG_E500=y +CONFIG_BOOKE=y +CONFIG_FSL_BOOKE=y +# CONFIG_PHYS_64BIT is not set +CONFIG_SPE=y +CONFIG_MATH_EMULATION=y +# CONFIG_KEXEC is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_WANT_EARLY_SERIAL is not set +CONFIG_PPC_GEN550=y +CONFIG_85xx=y +CONFIG_PPC_INDIRECT_PCI_BE=y + +# +# Freescale 85xx options +# +# CONFIG_MPC8540_ADS is not set +# CONFIG_MPC8548_CDS is not set +# CONFIG_MPC8555_CDS is not set +# CONFIG_MPC8560_ADS is not set +# CONFIG_SBC8560 is not set +# CONFIG_STX_GP3 is not set +CONFIG_TQM8540=y +# CONFIG_TQM8541 is not set +# CONFIG_TQM8555 is not set +# CONFIG_TQM8560 is not set +CONFIG_MPC8540=y + +# +# Platform options +# +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +# CONFIG_SOFTWARE_SUSPEND is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_PPC_I8259=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCI_LEGACY_PROC is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set +# CONFIG_RAPIDIO is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_AMDSTD_RETRY=0 +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_TQM85xx=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_SL82C105 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +CONFIG_BLK_DEV_VIA82CXXX=y +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +CONFIG_GIANFAR=y +CONFIG_GFAR_NAPI=y + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +CONFIG_SENSORS_DS1337=y +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +CONFIG_SENSORS_LM75=y +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +CONFIG_HWMON_DEBUG_CHIP=y + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +# CONFIG_MSDOS_PARTITION is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_SERIAL_TEXT_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# diff --git a/arch/ppc/configs/TQM8541_defconfig b/arch/ppc/configs/TQM8541_defconfig new file mode 100644 index 0000000..0ff5669 --- /dev/null +++ b/arch/ppc/configs/TQM8541_defconfig @@ -0,0 +1,986 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.15-rc2 +# Wed Nov 30 13:36:28 2005 +# +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_PPC=y +CONFIG_PPC32=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_HOTPLUG is not set +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_EMBEDDED=y +# CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +# CONFIG_EPOLL is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# Processor +# +# CONFIG_6xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_POWER3 is not set +# CONFIG_POWER4 is not set +# CONFIG_8xx is not set +# CONFIG_E200 is not set +CONFIG_E500=y +CONFIG_BOOKE=y +CONFIG_FSL_BOOKE=y +# CONFIG_PHYS_64BIT is not set +CONFIG_SPE=y +CONFIG_MATH_EMULATION=y +# CONFIG_KEXEC is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_WANT_EARLY_SERIAL is not set +CONFIG_PPC_GEN550=y +CONFIG_85xx=y +CONFIG_PPC_INDIRECT_PCI_BE=y + +# +# Freescale 85xx options +# +# CONFIG_MPC8540_ADS is not set +# CONFIG_MPC8548_CDS is not set +# CONFIG_MPC8555_CDS is not set +# CONFIG_MPC8560_ADS is not set +# CONFIG_SBC8560 is not set +# CONFIG_STX_GP3 is not set +# CONFIG_TQM8540 is not set +CONFIG_TQM8541=y +# CONFIG_TQM8555 is not set +# CONFIG_TQM8560 is not set +CONFIG_MPC8555=y + +# +# Platform options +# +CONFIG_CPM2=y +# CONFIG_PC_KEYBOARD is not set +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +# CONFIG_SOFTWARE_SUSPEND is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_PPC_I8259=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCI_LEGACY_PROC is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_AMDSTD_RETRY=0 +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_TQM85xx=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_SL82C105 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +CONFIG_BLK_DEV_VIA82CXXX=y +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_FS_ENET is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +CONFIG_GIANFAR=y +CONFIG_GFAR_NAPI=y + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_CPM is not set +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_MPC8260 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +CONFIG_SENSORS_DS1337=y +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_MAX6900 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCF8563 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +CONFIG_SENSORS_LM75=y +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +CONFIG_HWMON_DEBUG_CHIP=y + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +# CONFIG_MSDOS_PARTITION is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +# CONFIG_NLS is not set +# CONFIG_SCC_ENET is not set +# CONFIG_FEC_ENET is not set + +# +# CPM2 Options +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_KGDB_CONSOLE is not set +# CONFIG_SERIAL_TEXT_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# diff --git a/arch/ppc/configs/TQM8555_defconfig b/arch/ppc/configs/TQM8555_defconfig new file mode 100644 index 0000000..730b3db --- /dev/null +++ b/arch/ppc/configs/TQM8555_defconfig @@ -0,0 +1,983 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.15-rc2 +# Thu Nov 24 17:10:52 2005 +# +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_PPC=y +CONFIG_PPC32=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_HOTPLUG is not set +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_EMBEDDED=y +# CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +# CONFIG_EPOLL is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# Processor +# +# CONFIG_6xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_POWER3 is not set +# CONFIG_POWER4 is not set +# CONFIG_8xx is not set +# CONFIG_E200 is not set +CONFIG_E500=y +CONFIG_BOOKE=y +CONFIG_FSL_BOOKE=y +# CONFIG_PHYS_64BIT is not set +CONFIG_SPE=y +CONFIG_MATH_EMULATION=y +# CONFIG_KEXEC is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_WANT_EARLY_SERIAL is not set +CONFIG_PPC_GEN550=y +CONFIG_85xx=y +CONFIG_PPC_INDIRECT_PCI_BE=y + +# +# Freescale 85xx options +# +# CONFIG_MPC8540_ADS is not set +# CONFIG_MPC8548_CDS is not set +# CONFIG_MPC8555_CDS is not set +# CONFIG_MPC8560_ADS is not set +# CONFIG_SBC8560 is not set +# CONFIG_STX_GP3 is not set +# CONFIG_TQM8540 is not set +# CONFIG_TQM8541 is not set +CONFIG_TQM8555=y +# CONFIG_TQM8560 is not set +CONFIG_MPC8555=y + +# +# Platform options +# +CONFIG_CPM2=y +# CONFIG_PC_KEYBOARD is not set +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +# CONFIG_SOFTWARE_SUSPEND is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_PPC_I8259=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCI_LEGACY_PROC is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_AMDSTD_RETRY=0 +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_TQM85xx=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_SL82C105 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +CONFIG_BLK_DEV_VIA82CXXX=y +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_FS_ENET is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +CONFIG_GIANFAR=y +CONFIG_GFAR_NAPI=y + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_CPM is not set +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +CONFIG_SENSORS_DS1337=y +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +CONFIG_SENSORS_LM75=y +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +CONFIG_HWMON_DEBUG_CHIP=y + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +# CONFIG_MSDOS_PARTITION is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +# CONFIG_NLS is not set +# CONFIG_SCC_ENET is not set +# CONFIG_FEC_ENET is not set + +# +# CPM2 Options +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_KGDB_CONSOLE is not set +# CONFIG_SERIAL_TEXT_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# diff --git a/arch/ppc/configs/TQM8560_defconfig b/arch/ppc/configs/TQM8560_defconfig new file mode 100644 index 0000000..1d90207 --- /dev/null +++ b/arch/ppc/configs/TQM8560_defconfig @@ -0,0 +1,992 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.15-rc2 +# Wed Nov 30 16:47:53 2005 +# +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_PPC=y +CONFIG_PPC32=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_HOTPLUG is not set +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_EMBEDDED=y +# CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +# CONFIG_EPOLL is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# Processor +# +# CONFIG_6xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_POWER3 is not set +# CONFIG_POWER4 is not set +# CONFIG_8xx is not set +# CONFIG_E200 is not set +CONFIG_E500=y +CONFIG_BOOKE=y +CONFIG_FSL_BOOKE=y +# CONFIG_PHYS_64BIT is not set +CONFIG_SPE=y +CONFIG_MATH_EMULATION=y +# CONFIG_KEXEC is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_WANT_EARLY_SERIAL is not set +CONFIG_85xx=y +CONFIG_PPC_INDIRECT_PCI_BE=y + +# +# Freescale 85xx options +# +# CONFIG_MPC8540_ADS is not set +# CONFIG_MPC8548_CDS is not set +# CONFIG_MPC8555_CDS is not set +# CONFIG_MPC8560_ADS is not set +# CONFIG_SBC8560 is not set +# CONFIG_STX_GP3 is not set +# CONFIG_TQM8540 is not set +# CONFIG_TQM8541 is not set +# CONFIG_TQM8555 is not set +CONFIG_TQM8560=y +CONFIG_MPC8560=y + +# +# Platform options +# +CONFIG_CPM2=y +# CONFIG_PC_KEYBOARD is not set +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +# CONFIG_SOFTWARE_SUSPEND is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_PPC_I8259=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCI_LEGACY_PROC is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set +# CONFIG_RAPIDIO is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_AMDSTD_RETRY=0 +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_TQM85xx=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_SL82C105 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +CONFIG_BLK_DEV_VIA82CXXX=y +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_FS_ENET is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +CONFIG_GIANFAR=y +CONFIG_GFAR_NAPI=y + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_CPM=y +CONFIG_SERIAL_CPM_CONSOLE=y +CONFIG_SERIAL_CPM_SCC1=y +# CONFIG_SERIAL_CPM_SCC2 is not set +# CONFIG_SERIAL_CPM_SCC3 is not set +# CONFIG_SERIAL_CPM_SCC4 is not set +# CONFIG_SERIAL_CPM_SMC1 is not set +# CONFIG_SERIAL_CPM_SMC2 is not set +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_MPC8260 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +CONFIG_SENSORS_DS1337=y +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_MAX6900 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCF8563 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +CONFIG_SENSORS_LM75=y +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +CONFIG_HWMON_DEBUG_CHIP=y + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +# CONFIG_MSDOS_PARTITION is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +# CONFIG_NLS is not set +# CONFIG_SCC_ENET is not set +# CONFIG_FEC_ENET is not set + +# +# CPM2 Options +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_KGDB_CONSOLE is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile index 0bb23fc..e6c1d615 100644 --- a/arch/ppc/kernel/Makefile +++ b/arch/ppc/kernel/Makefile @@ -49,5 +49,4 @@ obj-$(CONFIG_TAU) += temp.o ifndef CONFIG_E200 obj-$(CONFIG_FSL_BOOKE) += perfmon_fsl_booke.o endif -obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o endif diff --git a/arch/ppc/kernel/asm-offsets.c b/arch/ppc/kernel/asm-offsets.c index fe0e767..7964bf6 100644 --- a/arch/ppc/kernel/asm-offsets.c +++ b/arch/ppc/kernel/asm-offsets.c @@ -131,7 +131,7 @@ main(void) DEFINE(CPU_SPEC_FEATURES, offsetof(struct cpu_spec, cpu_features)); DEFINE(CPU_SPEC_SETUP, offsetof(struct cpu_spec, cpu_setup)); - DEFINE(TI_SC_NOERR, offsetof(struct thread_info, syscall_noerror)); + DEFINE(TI_SIGFRAME, offsetof(struct thread_info, nvgprs_frame)); DEFINE(TI_TASK, offsetof(struct thread_info, task)); DEFINE(TI_EXECDOMAIN, offsetof(struct thread_info, exec_domain)); DEFINE(TI_FLAGS, offsetof(struct thread_info, flags)); diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S index f044edb..a48b950 100644 --- a/arch/ppc/kernel/entry.S +++ b/arch/ppc/kernel/entry.S @@ -200,8 +200,6 @@ _GLOBAL(DoSyscall) bl do_show_syscall #endif /* SHOW_SYSCALLS */ rlwinm r10,r1,0,0,18 /* current_thread_info() */ - li r11,0 - stb r11,TI_SC_NOERR(r10) lwz r11,TI_FLAGS(r10) andi. r11,r11,_TIF_SYSCALL_T_OR_A bne- syscall_dotrace @@ -222,25 +220,21 @@ ret_from_syscall: bl do_show_syscall_exit #endif mr r6,r3 - li r11,-_LAST_ERRNO - cmplw 0,r3,r11 rlwinm r12,r1,0,0,18 /* current_thread_info() */ - blt+ 30f - lbz r11,TI_SC_NOERR(r12) - cmpwi r11,0 - bne 30f - neg r3,r3 - lwz r10,_CCR(r1) /* Set SO bit in CR */ - oris r10,r10,0x1000 - stw r10,_CCR(r1) - /* disable interrupts so current_thread_info()->flags can't change */ -30: LOAD_MSR_KERNEL(r10,MSR_KERNEL) /* doesn't include MSR_EE */ + LOAD_MSR_KERNEL(r10,MSR_KERNEL) /* doesn't include MSR_EE */ SYNC MTMSRD(r10) lwz r9,TI_FLAGS(r12) - andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SIGPENDING|_TIF_NEED_RESCHED) + li r8,-_LAST_ERRNO + andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SIGPENDING|_TIF_NEED_RESCHED|_TIF_RESTOREALL) bne- syscall_exit_work + cmplw 0,r3,r8 + blt+ syscall_exit_cont + lwz r11,_CCR(r1) /* Load CR */ + neg r3,r3 + oris r11,r11,0x1000 /* Set SO bit in CR */ + stw r11,_CCR(r1) syscall_exit_cont: #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE) /* If the process has its own DBCR0 value, load it up. The single @@ -292,46 +286,113 @@ syscall_dotrace: b syscall_dotrace_cont syscall_exit_work: - stw r6,RESULT(r1) /* Save result */ + andi. r0,r9,_TIF_RESTOREALL + bne- 2f + cmplw 0,r3,r8 + blt+ 1f + andi. r0,r9,_TIF_NOERROR + bne- 1f + lwz r11,_CCR(r1) /* Load CR */ + neg r3,r3 + oris r11,r11,0x1000 /* Set SO bit in CR */ + stw r11,_CCR(r1) + +1: stw r6,RESULT(r1) /* Save result */ stw r3,GPR3(r1) /* Update return value */ - andi. r0,r9,_TIF_SYSCALL_T_OR_A - beq 5f - ori r10,r10,MSR_EE - SYNC - MTMSRD(r10) /* re-enable interrupts */ +2: andi. r0,r9,(_TIF_PERSYSCALL_MASK) + beq 4f + + /* Clear per-syscall TIF flags if any are set, but _leave_ + _TIF_SAVE_NVGPRS set in r9 since we haven't dealt with that + yet. */ + + li r11,_TIF_PERSYSCALL_MASK + addi r12,r12,TI_FLAGS +3: lwarx r8,0,r12 + andc r8,r8,r11 +#ifdef CONFIG_IBM405_ERR77 + dcbt 0,r12 +#endif + stwcx. r8,0,r12 + bne- 3b + subi r12,r12,TI_FLAGS + +4: /* Anything which requires enabling interrupts? */ + andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_SAVE_NVGPRS) + beq 7f + + /* Save NVGPRS if they're not saved already */ lwz r4,TRAP(r1) andi. r4,r4,1 - beq 4f + beq 5f SAVE_NVGPRS(r1) li r4,0xc00 stw r4,TRAP(r1) -4: + + /* Re-enable interrupts */ +5: ori r10,r10,MSR_EE + SYNC + MTMSRD(r10) + + andi. r0,r9,_TIF_SAVE_NVGPRS + bne save_user_nvgprs + +save_user_nvgprs_cont: + andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP) + beq 7f + addi r3,r1,STACK_FRAME_OVERHEAD bl do_syscall_trace_leave REST_NVGPRS(r1) -2: - lwz r3,GPR3(r1) + +6: lwz r3,GPR3(r1) LOAD_MSR_KERNEL(r10,MSR_KERNEL) /* doesn't include MSR_EE */ SYNC MTMSRD(r10) /* disable interrupts again */ rlwinm r12,r1,0,0,18 /* current_thread_info() */ lwz r9,TI_FLAGS(r12) -5: +7: andi. r0,r9,_TIF_NEED_RESCHED - bne 1f + bne 8f lwz r5,_MSR(r1) andi. r5,r5,MSR_PR - beq syscall_exit_cont + beq ret_from_except andi. r0,r9,_TIF_SIGPENDING - beq syscall_exit_cont + beq ret_from_except b do_user_signal -1: +8: ori r10,r10,MSR_EE SYNC MTMSRD(r10) /* re-enable interrupts */ bl schedule - b 2b + b 6b + +save_user_nvgprs: + lwz r8,TI_SIGFRAME(r12) + +.macro savewords start, end + 1: stw \start,4*(\start)(r8) + .section __ex_table,"a" + .align 2 + .long 1b,save_user_nvgprs_fault + .previous + .if \end - \start + savewords "(\start+1)",\end + .endif +.endm + savewords 14,31 + b save_user_nvgprs_cont + + +save_user_nvgprs_fault: + li r3,11 /* SIGSEGV */ + lwz r4,TI_TASK(r12) + bl force_sigsegv + rlwinm r12,r1,0,0,18 /* current_thread_info() */ + lwz r9,TI_FLAGS(r12) + b save_user_nvgprs_cont + #ifdef SHOW_SYSCALLS do_show_syscall: #ifdef SHOW_SYSCALLS_TASK @@ -401,28 +462,10 @@ show_syscalls_task: #endif /* SHOW_SYSCALLS */ /* - * The sigsuspend and rt_sigsuspend system calls can call do_signal - * and thus put the process into the stopped state where we might - * want to examine its user state with ptrace. Therefore we need - * to save all the nonvolatile registers (r13 - r31) before calling - * the C code. + * The fork/clone functions need to copy the full register set into + * the child process. Therefore we need to save all the nonvolatile + * registers (r13 - r31) before calling the C code. */ - .globl ppc_sigsuspend -ppc_sigsuspend: - SAVE_NVGPRS(r1) - lwz r0,TRAP(r1) - rlwinm r0,r0,0,0,30 /* clear LSB to indicate full */ - stw r0,TRAP(r1) /* register set saved */ - b sys_sigsuspend - - .globl ppc_rt_sigsuspend -ppc_rt_sigsuspend: - SAVE_NVGPRS(r1) - lwz r0,TRAP(r1) - rlwinm r0,r0,0,0,30 - stw r0,TRAP(r1) - b sys_rt_sigsuspend - .globl ppc_fork ppc_fork: SAVE_NVGPRS(r1) @@ -447,14 +490,6 @@ ppc_clone: stw r0,TRAP(r1) /* register set saved */ b sys_clone - .globl ppc_swapcontext -ppc_swapcontext: - SAVE_NVGPRS(r1) - lwz r0,TRAP(r1) - rlwinm r0,r0,0,0,30 /* clear LSB to indicate full */ - stw r0,TRAP(r1) /* register set saved */ - b sys_swapcontext - /* * Top-level page fault handling. * This is in assembler because if do_page_fault tells us that @@ -626,16 +661,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_601) .long ret_from_except #endif - .globl sigreturn_exit -sigreturn_exit: - subi r1,r3,STACK_FRAME_OVERHEAD - rlwinm r12,r1,0,0,18 /* current_thread_info() */ - lwz r9,TI_FLAGS(r12) - andi. r0,r9,_TIF_SYSCALL_T_OR_A - beq+ ret_from_except_full - bl do_syscall_trace_leave - /* fall through */ - .globl ret_from_except_full ret_from_except_full: REST_NVGPRS(r1) @@ -658,7 +683,7 @@ user_exc_return: /* r10 contains MSR_KERNEL here */ /* Check current_thread_info()->flags */ rlwinm r9,r1,0,0,18 lwz r9,TI_FLAGS(r9) - andi. r0,r9,(_TIF_SIGPENDING|_TIF_NEED_RESCHED) + andi. r0,r9,(_TIF_SIGPENDING|_TIF_NEED_RESCHED|_TIF_RESTOREALL) bne do_work restore_user: diff --git a/arch/ppc/kernel/misc.S b/arch/ppc/kernel/misc.S index 5e61124..fb5658b 100644 --- a/arch/ppc/kernel/misc.S +++ b/arch/ppc/kernel/misc.S @@ -1197,7 +1197,7 @@ _GLOBAL(sys_call_table) .long sys_ssetmask .long sys_setreuid /* 70 */ .long sys_setregid - .long ppc_sigsuspend + .long sys_sigsuspend .long sys_sigpending .long sys_sethostname .long sys_setrlimit /* 75 */ @@ -1303,7 +1303,7 @@ _GLOBAL(sys_call_table) .long sys_rt_sigpending /* 175 */ .long sys_rt_sigtimedwait .long sys_rt_sigqueueinfo - .long ppc_rt_sigsuspend + .long sys_rt_sigsuspend .long sys_pread64 .long sys_pwrite64 /* 180 */ .long sys_chown @@ -1374,7 +1374,7 @@ _GLOBAL(sys_call_table) .long sys_clock_gettime .long sys_clock_getres .long sys_clock_nanosleep - .long ppc_swapcontext + .long sys_swapcontext .long sys_tgkill /* 250 */ .long sys_utimes .long sys_statfs64 diff --git a/arch/ppc/kernel/pci.c b/arch/ppc/kernel/pci.c index f7fae5f..50c75ee 100644 --- a/arch/ppc/kernel/pci.c +++ b/arch/ppc/kernel/pci.c @@ -815,8 +815,7 @@ EXPORT_SYMBOL(pci_device_to_OF_node); * to set pci_assign_all_buses to 1 and still use RTAS for PCI * config cycles. */ -struct pci_controller* -pci_find_hose_for_OF_device(struct device_node* node) +struct pci_controller* pci_find_hose_for_OF_device(struct device_node* node) { if (!have_of) return NULL; @@ -942,7 +941,7 @@ pci_process_bridge_OF_ranges(struct pci_controller *hose, while (ranges && (rlen -= np * sizeof(unsigned int)) >= 0) { res = NULL; size = ranges[na+4]; - switch (ranges[0] >> 24) { + switch ((ranges[0] >> 24) & 0x3) { case 1: /* I/O space */ if (ranges[2] != 0) break; @@ -956,6 +955,8 @@ pci_process_bridge_OF_ranges(struct pci_controller *hose, res = &hose->io_resource; res->flags = IORESOURCE_IO; res->start = ranges[2]; + DBG("PCI: IO 0x%lx -> 0x%lx\n", + res->start, res->start + size - 1); break; case 2: /* memory space */ memno = 0; @@ -973,7 +974,11 @@ pci_process_bridge_OF_ranges(struct pci_controller *hose, if (memno < 3) { res = &hose->mem_resources[memno]; res->flags = IORESOURCE_MEM; + if(ranges[0] & 0x40000000) + res->flags |= IORESOURCE_PREFETCH; res->start = ranges[na+2]; + DBG("PCI: MEM[%d] 0x%lx -> 0x%lx\n", memno, + res->start, res->start + size - 1); } break; } @@ -1806,6 +1811,23 @@ void pci_iounmap(struct pci_dev *dev, void __iomem *addr) EXPORT_SYMBOL(pci_iomap); EXPORT_SYMBOL(pci_iounmap); +unsigned long pci_address_to_pio(phys_addr_t address) +{ + struct pci_controller* hose = hose_head; + + for (; hose; hose = hose->next) { + unsigned int size = hose->io_resource.end - + hose->io_resource.start + 1; + if (address >= hose->io_base_phys && + address < (hose->io_base_phys + size)) { + unsigned long base = + (unsigned long)hose->io_base_virt - _IO_BASE; + return base + (address - hose->io_base_phys); + } + } + return (unsigned int)-1; +} +EXPORT_SYMBOL(pci_address_to_pio); /* * Null PCI config access functions, for the case when we can't diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c index bb6a5c6..95075f9 100644 --- a/arch/ppc/kernel/ppc_ksyms.c +++ b/arch/ppc/kernel/ppc_ksyms.c @@ -82,10 +82,6 @@ EXPORT_SYMBOL(ppc_n_lost_interrupts); EXPORT_SYMBOL(ISA_DMA_THRESHOLD); EXPORT_SYMBOL(DMA_MODE_READ); EXPORT_SYMBOL(DMA_MODE_WRITE); -#if defined(CONFIG_PPC_PREP) -EXPORT_SYMBOL(_prep_type); -EXPORT_SYMBOL(ucSystemType); -#endif #if !defined(__INLINE_BITOPS) EXPORT_SYMBOL(set_bit); @@ -311,7 +307,6 @@ EXPORT_SYMBOL(__res); EXPORT_SYMBOL(next_mmu_context); EXPORT_SYMBOL(set_context); -EXPORT_SYMBOL_GPL(__handle_mm_fault); /* For MOL */ EXPORT_SYMBOL(disarm_decr); #ifdef CONFIG_PPC_STD_MMU extern long mol_trampoline; diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c index 0eb0b70..e707c6f 100644 --- a/arch/ppc/kernel/setup.c +++ b/arch/ppc/kernel/setup.c @@ -744,6 +744,9 @@ void __init setup_arch(char **cmdline_p) /* so udelay does something sensible, assume <= 1000 bogomips */ loops_per_jiffy = 500000000 / HZ; + if (ppc_md.init_early) + ppc_md.init_early(); + #ifdef CONFIG_PPC_MULTIPLATFORM /* This could be called "early setup arch", it must be done * now because xmon need it diff --git a/arch/ppc/platforms/85xx/Kconfig b/arch/ppc/platforms/85xx/Kconfig index c5bc282..7ddd331 100644 --- a/arch/ppc/platforms/85xx/Kconfig +++ b/arch/ppc/platforms/85xx/Kconfig @@ -39,7 +39,7 @@ config MPC8560_ADS config SBC8560 bool "WindRiver PowerQUICC III SBC8560" help - This option enables support for the WindRiver PowerQUICC III + This option enables support for the WindRiver PowerQUICC III SBC8560 board. config STX_GP3 @@ -48,6 +48,26 @@ config STX_GP3 This option enables support for the Silicon Turnkey Express GP3 board. +config TQM8540 + bool "TQ Components TQM8540" + help + This option enablese support for the TQ Components TQM8540 board. + +config TQM8541 + bool "TQ Components TQM8541" + help + This option enablese support for the TQ Components TQM8541 board. + +config TQM8555 + bool "TQ Components TQM8555" + help + This option enablese support for the TQ Components TQM8555 board. + +config TQM8560 + bool "TQ Components TQM8560" + help + This option enablese support for the TQ Components TQM8560 board. + endchoice # It's often necessary to know the specific 85xx processor type. @@ -55,7 +75,7 @@ endchoice # don't need to ask more redundant questions. config MPC8540 bool - depends on MPC8540_ADS + depends on MPC8540_ADS || TQM8540 default y config MPC8548 @@ -65,12 +85,12 @@ config MPC8548 config MPC8555 bool - depends on MPC8555_CDS + depends on MPC8555_CDS || TQM8541 || TQM8555 default y config MPC8560 bool - depends on SBC8560 || MPC8560_ADS || STX_GP3 + depends on SBC8560 || MPC8560_ADS || STX_GP3 || TQM8560 default y config 85xx_PCI2 diff --git a/arch/ppc/platforms/85xx/Makefile b/arch/ppc/platforms/85xx/Makefile index efdf813..6c4753c 100644 --- a/arch/ppc/platforms/85xx/Makefile +++ b/arch/ppc/platforms/85xx/Makefile @@ -7,3 +7,7 @@ obj-$(CONFIG_MPC8555_CDS) += mpc85xx_cds_common.o obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads_common.o mpc8560_ads.o obj-$(CONFIG_SBC8560) += sbc85xx.o sbc8560.o obj-$(CONFIG_STX_GP3) += stx_gp3.o +obj-$(CONFIG_TQM8540) += tqm85xx.o +obj-$(CONFIG_TQM8541) += tqm85xx.o +obj-$(CONFIG_TQM8555) += tqm85xx.o +obj-$(CONFIG_TQM8560) += tqm85xx.o diff --git a/arch/ppc/platforms/85xx/tqm85xx.c b/arch/ppc/platforms/85xx/tqm85xx.c new file mode 100644 index 0000000..c6dfd8f --- /dev/null +++ b/arch/ppc/platforms/85xx/tqm85xx.c @@ -0,0 +1,419 @@ +/* + * arch/ppc/platforms/85xx/tqm85xx.c + * + * TQM85xx (40/41/55/60) board specific routines + * + * Copyright (c) 2005 DENX Software Engineering + * Stefan Roese <sr@denx.de> + * + * Based on original work by + * Kumar Gala <galak@kernel.crashing.org> + * Copyright 2004 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/config.h> +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/reboot.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/major.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> +#include <linux/serial.h> +#include <linux/tty.h> /* for linux/serial_core.h */ +#include <linux/serial_core.h> +#include <linux/initrd.h> +#include <linux/module.h> +#include <linux/fsl_devices.h> + +#include <asm/system.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/atomic.h> +#include <asm/time.h> +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/open_pic.h> +#include <asm/bootinfo.h> +#include <asm/pci-bridge.h> +#include <asm/mpc85xx.h> +#include <asm/irq.h> +#include <asm/immap_85xx.h> +#include <asm/kgdb.h> +#include <asm/ppc_sys.h> +#include <asm/cpm2.h> +#include <mm/mmu_decl.h> + +#include <syslib/ppc85xx_setup.h> +#include <syslib/cpm2_pic.h> +#include <syslib/ppc85xx_common.h> +#include <syslib/ppc85xx_rio.h> + +#ifndef CONFIG_PCI +unsigned long isa_io_base = 0; +unsigned long isa_mem_base = 0; +#endif + + +extern unsigned long total_memory; /* in mm/init */ + +unsigned char __res[sizeof (bd_t)]; + +/* Internal interrupts are all Level Sensitive, and Positive Polarity */ +static u_char tqm85xx_openpic_initsenses[] __initdata = { + MPC85XX_INTERNAL_IRQ_SENSES, + 0x0, /* External 0: */ + 0x0, /* External 1: */ +#if defined(CONFIG_PCI) + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 2: PCI INTA */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 3: PCI INTB */ +#else + 0x0, /* External 2: */ + 0x0, /* External 3: */ +#endif + 0x0, /* External 4: */ + 0x0, /* External 5: */ + 0x0, /* External 6: */ + 0x0, /* External 7: */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 8: PHY */ + 0x0, /* External 9: */ + 0x0, /* External 10: */ + 0x0, /* External 11: */ +}; + +static const char *GFAR_PHY_0 = "phy0:2"; +static const char *GFAR_PHY_1 = "phy0:1"; +#ifdef CONFIG_MPC8540 +static const char *GFAR_PHY_3 = "phy0:3"; +#endif + +/* ************************************************************************ + * + * Setup the architecture + * + */ +static void __init +tqm85xx_setup_arch(void) +{ + bd_t *binfo = (bd_t *) __res; + unsigned int freq; + struct gianfar_platform_data *pdata; + struct gianfar_mdio_data *mdata; + +#ifdef CONFIG_MPC8560 + cpm2_reset(); +#endif + + /* get the core frequency */ + freq = binfo->bi_intfreq; + + if (ppc_md.progress) + ppc_md.progress("tqm85xx_setup_arch()", 0); + + /* Set loops_per_jiffy to a half-way reasonable value, + for use until calibrate_delay gets called. */ + loops_per_jiffy = freq / HZ; + +#ifdef CONFIG_PCI + /* setup PCI host bridges */ + mpc85xx_setup_hose(); +#endif + +#ifndef CONFIG_MPC8560 +#if defined(CONFIG_SERIAL_8250) + mpc85xx_early_serial_map(); +#endif + +#ifdef CONFIG_SERIAL_TEXT_DEBUG + /* Invalidate the entry we stole earlier the serial ports + * should be properly mapped */ + invalidate_tlbcam_entry(num_tlbcam_entries - 1); +#endif +#endif /* CONFIG_MPC8560 */ + + /* setup the board related info for the MDIO bus */ + mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO); + + mdata->irq[0] = MPC85xx_IRQ_EXT8; + mdata->irq[1] = MPC85xx_IRQ_EXT8; + mdata->irq[2] = -1; + mdata->irq[3] = MPC85xx_IRQ_EXT8; + mdata->irq[31] = -1; + mdata->paddr += binfo->bi_immr_base; + + /* setup the board related information for the enet controllers */ + pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1); + if (pdata) { + pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; + pdata->bus_id = GFAR_PHY_0; + memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6); + } + + pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2); + if (pdata) { + pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; + pdata->bus_id = GFAR_PHY_1; + memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); + } + +#ifdef CONFIG_MPC8540 + pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_FEC); + if (pdata) { + pdata->board_flags = 0; + pdata->bus_id = GFAR_PHY_3; + memcpy(pdata->mac_addr, binfo->bi_enet2addr, 6); + } +#endif + +#ifdef CONFIG_BLK_DEV_INITRD + if (initrd_start) + ROOT_DEV = Root_RAM0; + else +#endif +#ifdef CONFIG_ROOT_NFS + ROOT_DEV = Root_NFS; +#else + ROOT_DEV = Root_HDA1; +#endif +} + +#ifdef CONFIG_MPC8560 +static irqreturn_t cpm2_cascade(int irq, void *dev_id, struct pt_regs *regs) +{ + while ((irq = cpm2_get_irq(regs)) >= 0) + __do_IRQ(irq, regs); + return IRQ_HANDLED; +} + +static struct irqaction cpm2_irqaction = { + .handler = cpm2_cascade, + .flags = SA_INTERRUPT, + .mask = CPU_MASK_NONE, + .name = "cpm2_cascade", +}; +#endif /* CONFIG_MPC8560 */ + +void __init +tqm85xx_init_IRQ(void) +{ + bd_t *binfo = (bd_t *) __res; + + /* Determine the Physical Address of the OpenPIC regs */ + phys_addr_t OpenPIC_PAddr = + binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET; + OpenPIC_Addr = ioremap(OpenPIC_PAddr, MPC85xx_OPENPIC_SIZE); + OpenPIC_InitSenses = tqm85xx_openpic_initsenses; + OpenPIC_NumInitSenses = sizeof (tqm85xx_openpic_initsenses); + + /* Skip reserved space and internal sources */ + openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200); + + /* Map PIC IRQs 0-11 */ + openpic_set_sources(48, 12, OpenPIC_Addr + 0x10000); + + /* we let openpic interrupts starting from an offset, to + * leave space for cascading interrupts underneath. + */ + openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET); + +#ifdef CONFIG_MPC8560 + /* Setup CPM2 PIC */ + cpm2_init_IRQ(); + + setup_irq(MPC85xx_IRQ_CPM, &cpm2_irqaction); +#endif /* CONFIG_MPC8560 */ + + return; +} + +int tqm85xx_show_cpuinfo(struct seq_file *m) +{ + uint pvid, svid, phid1; + uint memsize = total_memory; + bd_t *binfo = (bd_t *) __res; + unsigned int freq; + + /* get the core frequency */ + freq = binfo->bi_intfreq; + + pvid = mfspr(SPRN_PVR); + svid = mfspr(SPRN_SVR); + + seq_printf(m, "Vendor\t\t: TQ Components\n"); + seq_printf(m, "Machine\t\t: TQM%s\n", cur_ppc_sys_spec->ppc_sys_name); + seq_printf(m, "clock\t\t: %dMHz\n", freq / 1000000); + seq_printf(m, "PVR\t\t: 0x%x\n", pvid); + seq_printf(m, "SVR\t\t: 0x%x\n", svid); + + /* Display cpu Pll setting */ + phid1 = mfspr(SPRN_HID1); + seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); + + /* Display the amount of memory */ + seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); + + return 0; +} + +#if defined(CONFIG_I2C) && defined(CONFIG_SENSORS_DS1337) +extern ulong ds1337_get_rtc_time(void); +extern int ds1337_set_rtc_time(unsigned long nowtime); + +static int __init +tqm85xx_rtc_hookup(void) +{ + struct timespec tv; + + ppc_md.set_rtc_time = ds1337_set_rtc_time; + ppc_md.get_rtc_time = ds1337_get_rtc_time; + + tv.tv_nsec = 0; + tv.tv_sec = (ppc_md.get_rtc_time)(); + do_settimeofday(&tv); + + return 0; +} +late_initcall(tqm85xx_rtc_hookup); +#endif + +#ifdef CONFIG_PCI +/* + * interrupt routing + */ +int mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +{ + static char pci_irq_table[][4] = + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + {PIRQA, PIRQB, 0, 0}, + }; + + const long min_idsel = 0x1c, max_idsel = 0x1c, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; +} + +int mpc85xx_exclude_device(u_char bus, u_char devfn) +{ + if (bus == 0 && PCI_SLOT(devfn) == 0) + return PCIBIOS_DEVICE_NOT_FOUND; + else + return PCIBIOS_SUCCESSFUL; +} + +#endif /* CONFIG_PCI */ + +#ifdef CONFIG_RAPIDIO +void platform_rio_init(void) +{ + /* 512MB RIO LAW at 0xc0000000 */ + mpc85xx_rio_setup(0xc0000000, 0x20000000); +} +#endif /* CONFIG_RAPIDIO */ + +/* ************************************************************************ */ +void __init +platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + /* parse_bootinfo must always be called first */ + parse_bootinfo(find_bootinfo()); + + /* + * If we were passed in a board information, copy it into the + * residual data area. + */ + if (r3) { + memcpy((void *) __res, (void *) (r3 + KERNELBASE), + sizeof (bd_t)); + } + +#if defined(CONFIG_SERIAL_TEXT_DEBUG) && !defined(CONFIG_MPC8560) + { + bd_t *binfo = (bd_t *) __res; + struct uart_port p; + + /* Use the last TLB entry to map CCSRBAR to allow access to DUART regs */ + settlbcam(num_tlbcam_entries - 1, binfo->bi_immr_base, + binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0); + + memset(&p, 0, sizeof (p)); + p.iotype = SERIAL_IO_MEM; + p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART0_OFFSET; + p.uartclk = binfo->bi_busfreq; + + gen550_init(0, &p); + + memset(&p, 0, sizeof (p)); + p.iotype = SERIAL_IO_MEM; + p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART1_OFFSET; + p.uartclk = binfo->bi_busfreq; + + gen550_init(1, &p); + } +#endif + +#if defined(CONFIG_BLK_DEV_INITRD) + /* + * If the init RAM disk has been configured in, and there's a valid + * starting address for it, set it up. + */ + if (r4) { + initrd_start = r4 + KERNELBASE; + initrd_end = r5 + KERNELBASE; + } +#endif /* CONFIG_BLK_DEV_INITRD */ + + /* Copy the kernel command line arguments to a safe place. */ + + if (r6) { + *(char *) (r7 + KERNELBASE) = 0; + strcpy(cmd_line, (char *) (r6 + KERNELBASE)); + } + + identify_ppc_sys_by_id(mfspr(SPRN_SVR)); + + /* setup the PowerPC module struct */ + ppc_md.setup_arch = tqm85xx_setup_arch; + ppc_md.show_cpuinfo = tqm85xx_show_cpuinfo; + + ppc_md.init_IRQ = tqm85xx_init_IRQ; + ppc_md.get_irq = openpic_get_irq; + + ppc_md.restart = mpc85xx_restart; + ppc_md.power_off = mpc85xx_power_off; + ppc_md.halt = mpc85xx_halt; + + ppc_md.find_end_of_memory = mpc85xx_find_end_of_memory; + + ppc_md.time_init = NULL; + ppc_md.set_rtc_time = NULL; + ppc_md.get_rtc_time = NULL; + ppc_md.calibrate_decr = mpc85xx_calibrate_decr; + +#ifndef CONFIG_MPC8560 +#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG) + ppc_md.progress = gen550_progress; +#endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */ +#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB) + ppc_md.early_serial_map = mpc85xx_early_serial_map; +#endif /* CONFIG_SERIAL_8250 && CONFIG_KGDB */ +#endif /* CONFIG_MPC8560 */ + + if (ppc_md.progress) + ppc_md.progress("tqm85xx_init(): exit", 0); + + return; +} diff --git a/arch/ppc/platforms/85xx/tqm85xx.h b/arch/ppc/platforms/85xx/tqm85xx.h new file mode 100644 index 0000000..3775eb3 --- /dev/null +++ b/arch/ppc/platforms/85xx/tqm85xx.h @@ -0,0 +1,56 @@ +/* + * arch/ppc/platforms/85xx/tqm85xx.h + * + * TQM85xx (40/41/55/60) board definitions + * + * Copyright (c) 2005 DENX Software Engineering + * Stefan Roese <sr@denx.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __MACH_TQM85XX_H +#define __MACH_TQM85XX_H + +#include <linux/config.h> +#include <linux/init.h> +#include <asm/ppcboot.h> + +#define BOARD_CCSRBAR ((uint)0xe0000000) +#define CCSRBAR_SIZE ((uint)1024*1024) + +#define CPM_MAP_ADDR (CCSRBAR + MPC85xx_CPM_OFFSET) + +#define PCI_CFG_ADDR_OFFSET (0x8000) +#define PCI_CFG_DATA_OFFSET (0x8004) + +/* PCI interrupt controller */ +#define PIRQA MPC85xx_IRQ_EXT2 +#define PIRQB MPC85xx_IRQ_EXT3 + +#define MPC85XX_PCI1_LOWER_IO 0x00000000 +#define MPC85XX_PCI1_UPPER_IO 0x00ffffff + +#define MPC85XX_PCI1_LOWER_MEM 0x80000000 +#define MPC85XX_PCI1_UPPER_MEM 0x9fffffff + +#define MPC85XX_PCI1_IO_BASE 0xe2000000 +#define MPC85XX_PCI1_MEM_OFFSET 0x00000000 + +#define MPC85XX_PCI1_IO_SIZE 0x01000000 + +#define BASE_BAUD 115200 + +extern void mpc85xx_setup_hose(void) __init; +extern void mpc85xx_restart(char *cmd); +extern void mpc85xx_power_off(void); +extern void mpc85xx_halt(void); +extern void mpc85xx_init_IRQ(void) __init; +extern unsigned long mpc85xx_find_end_of_memory(void) __init; +extern void mpc85xx_calibrate_decr(void) __init; + +#endif /* __MACH_TQM85XX_H */ diff --git a/arch/ppc/platforms/chrp_setup.c b/arch/ppc/platforms/chrp_setup.c index f1b70ab..056ac2a 100644 --- a/arch/ppc/platforms/chrp_setup.c +++ b/arch/ppc/platforms/chrp_setup.c @@ -404,7 +404,6 @@ static struct irqaction xmon_irqaction = { void __init chrp_init_IRQ(void) { struct device_node *np; - int i; unsigned long chrp_int_ack = 0; unsigned char init_senses[NR_IRQS - NUM_8259_INTERRUPTS]; #if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON) diff --git a/arch/ppc/platforms/prep_setup.c b/arch/ppc/platforms/prep_setup.c index 4415748..d065358 100644 --- a/arch/ppc/platforms/prep_setup.c +++ b/arch/ppc/platforms/prep_setup.c @@ -72,7 +72,6 @@ TODC_ALLOC(); -unsigned char ucSystemType; unsigned char ucBoardRev; unsigned char ucBoardRevMaj, ucBoardRevMin; @@ -954,7 +953,6 @@ prep_calibrate_decr(void) static void __init prep_init_IRQ(void) { - int i; unsigned int pci_viddid, pci_did; if (OpenPIC_Addr != NULL) { diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile index 5b7f2b8..84ef030 100644 --- a/arch/ppc/syslib/Makefile +++ b/arch/ppc/syslib/Makefile @@ -96,7 +96,7 @@ ifeq ($(CONFIG_85xx),y) obj-$(CONFIG_PCI) += pci_auto.o endif obj-$(CONFIG_RAPIDIO) += ppc85xx_rio.o -obj-$(CONFIG_83xx) += ipic.o ppc83xx_setup.o ppc_sys.o \ +obj-$(CONFIG_83xx) += ppc83xx_setup.o ppc_sys.o \ mpc83xx_sys.o mpc83xx_devices.o ifeq ($(CONFIG_83xx),y) obj-$(CONFIG_PCI) += pci_auto.o diff --git a/arch/ppc/syslib/m8xx_setup.c b/arch/ppc/syslib/m8xx_setup.c index 1cc3abe..688616d 100644 --- a/arch/ppc/syslib/m8xx_setup.c +++ b/arch/ppc/syslib/m8xx_setup.c @@ -135,6 +135,16 @@ static struct irqaction tbint_irqaction = { .name = "tbint", }; +/* per-board overridable init_internal_rtc() function. */ +void __init __attribute__ ((weak)) +init_internal_rtc(void) +{ + /* Disable the RTC one second and alarm interrupts. */ + out_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc, in_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc) & ~(RTCSC_SIE | RTCSC_ALE)); + /* Enable the RTC */ + out_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc, in_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc) | (RTCSC_RTF | RTCSC_RTE)); +} + /* The decrementer counts at the system (internal) clock frequency divided by * sixteen, or external oscillator divided by four. We force the processor * to use system clock divided by sixteen. @@ -183,10 +193,7 @@ void __init m8xx_calibrate_decr(void) out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_rtcsck, KAPWR_KEY); out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_tbk, KAPWR_KEY); - /* Disable the RTC one second and alarm interrupts. */ - out_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc, in_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc) & ~(RTCSC_SIE | RTCSC_ALE)); - /* Enable the RTC */ - out_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc, in_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc) | (RTCSC_RTF | RTCSC_RTE)); + init_internal_rtc(); /* Enabling the decrementer also enables the timebase interrupts * (or from the other point of view, to get decrementer interrupts diff --git a/arch/ppc/syslib/m8xx_wdt.c b/arch/ppc/syslib/m8xx_wdt.c index a21632d..df6c955 100644 --- a/arch/ppc/syslib/m8xx_wdt.c +++ b/arch/ppc/syslib/m8xx_wdt.c @@ -19,6 +19,7 @@ #include <syslib/m8xx_wdt.h> static int wdt_timeout; +int m8xx_has_internal_rtc = 0; static irqreturn_t m8xx_wdt_interrupt(int, void *, struct pt_regs *); static struct irqaction m8xx_wdt_irqaction = { @@ -45,35 +46,15 @@ static irqreturn_t m8xx_wdt_interrupt(int irq, void *dev, struct pt_regs *regs) return IRQ_HANDLED; } -void __init m8xx_wdt_handler_install(bd_t * binfo) +#define SYPCR_SWP 0x1 +#define SYPCR_SWE 0x4 + + +void __init m8xx_wdt_install_irq(volatile immap_t *imap, bd_t *binfo) { - volatile immap_t *imap = (volatile immap_t *)IMAP_ADDR; u32 pitc; - u32 sypcr; u32 pitrtclk; - sypcr = in_be32(&imap->im_siu_conf.sc_sypcr); - - if (!(sypcr & 0x04)) { - printk(KERN_NOTICE "m8xx_wdt: wdt disabled (SYPCR: 0x%08X)\n", - sypcr); - return; - } - - m8xx_wdt_reset(); - - printk(KERN_NOTICE - "m8xx_wdt: active wdt found (SWTC: 0x%04X, SWP: 0x%01X)\n", - (sypcr >> 16), sypcr & 0x01); - - wdt_timeout = (sypcr >> 16) & 0xFFFF; - - if (!wdt_timeout) - wdt_timeout = 0xFFFF; - - if (sypcr & 0x01) - wdt_timeout *= 2048; - /* * Fire trigger if half of the wdt ticked down */ @@ -98,6 +79,67 @@ void __init m8xx_wdt_handler_install(bd_t * binfo) printk(KERN_NOTICE "m8xx_wdt: keep-alive trigger installed (PITC: 0x%04X)\n", pitc); +} + +static void m8xx_wdt_timer_func(unsigned long data); + +static struct timer_list m8xx_wdt_timer = + TIMER_INITIALIZER(m8xx_wdt_timer_func, 0, 0); + +void m8xx_wdt_stop_timer(void) +{ + del_timer(&m8xx_wdt_timer); +} + +void m8xx_wdt_install_timer(void) +{ + m8xx_wdt_timer.expires = jiffies + (HZ/2); + add_timer(&m8xx_wdt_timer); +} + +static void m8xx_wdt_timer_func(unsigned long data) +{ + m8xx_wdt_reset(); + m8xx_wdt_install_timer(); +} + +void __init m8xx_wdt_handler_install(bd_t * binfo) +{ + volatile immap_t *imap = (volatile immap_t *)IMAP_ADDR; + u32 sypcr; + + sypcr = in_be32(&imap->im_siu_conf.sc_sypcr); + + if (!(sypcr & SYPCR_SWE)) { + printk(KERN_NOTICE "m8xx_wdt: wdt disabled (SYPCR: 0x%08X)\n", + sypcr); + return; + } + + m8xx_wdt_reset(); + + printk(KERN_NOTICE + "m8xx_wdt: active wdt found (SWTC: 0x%04X, SWP: 0x%01X)\n", + (sypcr >> 16), sypcr & SYPCR_SWP); + + wdt_timeout = (sypcr >> 16) & 0xFFFF; + + if (!wdt_timeout) + wdt_timeout = 0xFFFF; + + if (sypcr & SYPCR_SWP) + wdt_timeout *= 2048; + + m8xx_has_internal_rtc = in_be16(&imap->im_sit.sit_rtcsc) & RTCSC_RTE; + + /* if the internal RTC is off use a kernel timer */ + if (!m8xx_has_internal_rtc) { + if (wdt_timeout < (binfo->bi_intfreq/HZ)) + printk(KERN_ERR "m8xx_wdt: timeout too short for ktimer!\n"); + m8xx_wdt_install_timer(); + } else + m8xx_wdt_install_irq(imap, binfo); + wdt_timeout /= binfo->bi_intfreq; } diff --git a/arch/ppc/syslib/m8xx_wdt.h b/arch/ppc/syslib/m8xx_wdt.h index 0d81a9f..e75835f 100644 --- a/arch/ppc/syslib/m8xx_wdt.h +++ b/arch/ppc/syslib/m8xx_wdt.h @@ -9,8 +9,12 @@ #ifndef _PPC_SYSLIB_M8XX_WDT_H #define _PPC_SYSLIB_M8XX_WDT_H +extern int m8xx_has_internal_rtc; + extern void m8xx_wdt_handler_install(bd_t * binfo); extern int m8xx_wdt_get_timeout(void); extern void m8xx_wdt_reset(void); +extern void m8xx_wdt_install_timer(void); +extern void m8xx_wdt_stop_timer(void); #endif /* _PPC_SYSLIB_M8XX_WDT_H */ |
