1887 files changed, 37904 insertions, 32425 deletions

diff --git a/arch/Kconfig b/arch/Kconfig
index 4b0669c..2505740 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -30,6 +30,10 @@ config OPROFILE_EVENT_MULTIPLEX
 config HAVE_OPROFILE
 	bool
 
+config OPROFILE_NMI_TIMER
+	def_bool y
+	depends on PERF_EVENTS && HAVE_PERF_EVENTS_NMI
+
 config KPROBES
 	bool "Kprobes"
 	depends on MODULES
diff --git a/arch/alpha/include/asm/ipcbuf.h b/arch/alpha/include/asm/ipcbuf.h
index d9c0e1a..84c7e51 100644
--- a/arch/alpha/include/asm/ipcbuf.h
+++ b/arch/alpha/include/asm/ipcbuf.h
@@ -1,28 +1 @@
-#ifndef _ALPHA_IPCBUF_H
-#define _ALPHA_IPCBUF_H
-
-/* 
- * The ipc64_perm structure for alpha architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit seq
- * - 2 miscellaneous 64-bit values
- */
-
-struct ipc64_perm
-{
-	__kernel_key_t	key;
-	__kernel_uid_t	uid;
-	__kernel_gid_t	gid;
-	__kernel_uid_t	cuid;
-	__kernel_gid_t	cgid;
-	__kernel_mode_t	mode; 
-	unsigned short	seq;
-	unsigned short	__pad1;
-	unsigned long	__unused1;
-	unsigned long	__unused2;
-};
-
-#endif /* _ALPHA_IPCBUF_H */
+#include <asm-generic/ipcbuf.h>
diff --git a/arch/alpha/include/asm/socket.h b/arch/alpha/include/asm/socket.h
index 06edfef..082355f 100644
--- a/arch/alpha/include/asm/socket.h
+++ b/arch/alpha/include/asm/socket.h
@@ -69,6 +69,9 @@
 
 #define SO_RXQ_OVFL             40
 
+#define SO_WIFI_STATUS		41
+#define SCM_WIFI_STATUS		SO_WIFI_STATUS
+
 /* O_NONBLOCK clashes with the bits used for socket types.  Therefore we
  * have to define SOCK_NONBLOCK to a different value here.
  */
diff --git a/arch/alpha/include/asm/thread_info.h b/arch/alpha/include/asm/thread_info.h
index ff73db0..28335bd 100644
--- a/arch/alpha/include/asm/thread_info.h
+++ b/arch/alpha/include/asm/thread_info.h
@@ -79,7 +79,6 @@ register struct thread_info *__current_thread_info __asm__("$8");
 #define TIF_UAC_SIGBUS		12	/* ! userspace part of 'osf_sysinfo' */
 #define TIF_MEMDIE		13	/* is terminating due to OOM killer */
 #define TIF_RESTORE_SIGMASK	14	/* restore signal mask in do_signal */
-#define TIF_FREEZE		16	/* is freezing for suspend */
 
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
 #define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
@@ -87,7 +86,6 @@ register struct thread_info *__current_thread_info __asm__("$8");
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
 #define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
 #define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
-#define _TIF_FREEZE		(1<<TIF_FREEZE)
 
 /* Work to do on interrupt/exception return.  */
 #define _TIF_WORK_MASK		(_TIF_SIGPENDING | _TIF_NEED_RESCHED | \
diff --git a/arch/alpha/include/asm/types.h b/arch/alpha/include/asm/types.h
index 8815443..0a05790 100644
--- a/arch/alpha/include/asm/types.h
+++ b/arch/alpha/include/asm/types.h
@@ -15,9 +15,4 @@
 #include <asm-generic/int-l64.h>
 #endif
 
-#ifndef __ASSEMBLY__
-
-typedef unsigned int umode_t;
-
-#endif /* __ASSEMBLY__ */
 #endif /* _ALPHA_TYPES_H */
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 44789ef..f72e170 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -220,8 +220,9 @@ config NEED_MACH_MEMORY_H
 	  be avoided when possible.
 
 config PHYS_OFFSET
-	hex "Physical address of main memory"
+	hex "Physical address of main memory" if MMU
 	depends on !ARM_PATCH_PHYS_VIRT && !NEED_MACH_MEMORY_H
+	default DRAM_BASE if !MMU
 	help
 	  Please provide the physical address corresponding to the
 	  location of main memory in your system.
@@ -257,6 +258,7 @@ config ARCH_INTEGRATOR
 	select ARCH_HAS_CPUFREQ
 	select CLKDEV_LOOKUP
 	select HAVE_MACH_CLKDEV
+	select HAVE_TCM
 	select ICST
 	select GENERIC_CLOCKEVENTS
 	select PLAT_VERSATILE
@@ -340,10 +342,12 @@ config ARCH_HIGHBANK
 	select ARM_AMBA
 	select ARM_GIC
 	select ARM_TIMER_SP804
+	select CACHE_L2X0
 	select CLKDEV_LOOKUP
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU
+	select HAVE_SMP
 	select USE_OF
 	help
 	  Support for the Calxeda Highbank SoC based boards.
@@ -361,6 +365,7 @@ config ARCH_CNS3XXX
 	select CPU_V6K
 	select GENERIC_CLOCKEVENTS
 	select ARM_GIC
+	select MIGHT_HAVE_CACHE_L2X0
 	select MIGHT_HAVE_PCI
 	select PCI_DOMAINS if PCI
 	help
@@ -381,6 +386,7 @@ config ARCH_PRIMA2
 	select GENERIC_CLOCKEVENTS
 	select CLKDEV_LOOKUP
 	select GENERIC_IRQ_CHIP
+	select MIGHT_HAVE_CACHE_L2X0
 	select USE_OF
 	select ZONE_DMA
 	help
@@ -633,6 +639,8 @@ config ARCH_TEGRA
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select HAVE_SCHED_CLOCK
+	select HAVE_SMP
+	select MIGHT_HAVE_CACHE_L2X0
 	select ARCH_HAS_CPUFREQ
 	help
 	  This enables support for NVIDIA Tegra based systems (Tegra APX,
@@ -702,7 +710,9 @@ config ARCH_SHMOBILE
 	select HAVE_CLK
 	select CLKDEV_LOOKUP
 	select HAVE_MACH_CLKDEV
+	select HAVE_SMP
 	select GENERIC_CLOCKEVENTS
+	select MIGHT_HAVE_CACHE_L2X0
 	select NO_IOPORT
 	select SPARSE_IRQ
 	select MULTI_IRQ_HANDLER
@@ -867,16 +877,6 @@ config ARCH_SHARK
 	  Support for the StrongARM based Digital DNARD machine, also known
 	  as "Shark" (<http://www.shark-linux.de/shark.html>).
 
-config ARCH_TCC_926
-	bool "Telechips TCC ARM926-based systems"
-	select CLKSRC_MMIO
-	select CPU_ARM926T
-	select HAVE_CLK
-	select CLKDEV_LOOKUP
-	select GENERIC_CLOCKEVENTS
-	help
-	  Support for Telechips TCC ARM926-based systems.
-
 config ARCH_U300
 	bool "ST-Ericsson U300 Series"
 	depends on MMU
@@ -904,6 +904,8 @@ config ARCH_U8500
 	select CLKDEV_LOOKUP
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_HAS_CPUFREQ
+	select HAVE_SMP
+	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  Support for ST-Ericsson's Ux500 architecture
 
@@ -914,6 +916,7 @@ config ARCH_NOMADIK
 	select CPU_ARM926T
 	select CLKDEV_LOOKUP
 	select GENERIC_CLOCKEVENTS
+	select MIGHT_HAVE_CACHE_L2X0
 	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Support for the Nomadik platform by ST-Ericsson
@@ -973,6 +976,7 @@ config ARCH_ZYNQ
 	select ARM_GIC
 	select ARM_AMBA
 	select ICST
+	select MIGHT_HAVE_CACHE_L2X0
 	select USE_OF
 	help
 	  Support for Xilinx Zynq ARM Cortex A9 Platform
@@ -1059,8 +1063,6 @@ source "arch/arm/plat-s5p/Kconfig"
 
 source "arch/arm/plat-spear/Kconfig"
 
-source "arch/arm/plat-tcc/Kconfig"
-
 if ARCH_S3C2410
 source "arch/arm/mach-s3c2410/Kconfig"
 source "arch/arm/mach-s3c2412/Kconfig"
@@ -1125,6 +1127,11 @@ config ARM_TIMER_SP804
 
 source arch/arm/mm/Kconfig
 
+config ARM_NR_BANKS
+	int
+	default 16 if ARCH_EP93XX
+	default 8
+
 config IWMMXT
 	bool "Enable iWMMXt support"
 	depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4
@@ -1133,10 +1140,9 @@ config IWMMXT
 	  Enable support for iWMMXt context switching at run time if
 	  running on a CPU that supports it.
 
-#  bool 'Use XScale PMU as timer source' CONFIG_XSCALE_PMU_TIMER
 config XSCALE_PMU
 	bool
-	depends on CPU_XSCALE && !XSCALE_PMU_TIMER
+	depends on CPU_XSCALE
 	default y
 
 config CPU_HAS_PMU
@@ -1231,7 +1237,7 @@ config ARM_ERRATA_742231
 	  capabilities of the processor.
 
 config PL310_ERRATA_588369
-	bool "Clean & Invalidate maintenance operations do not invalidate clean lines"
+	bool "PL310 errata: Clean & Invalidate maintenance operations do not invalidate clean lines"
 	depends on CACHE_L2X0
 	help
 	   The PL310 L2 cache controller implements three types of Clean &
@@ -1245,7 +1251,7 @@ config PL310_ERRATA_588369
 
 config ARM_ERRATA_720789
 	bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID"
-	depends on CPU_V7 && SMP
+	depends on CPU_V7
 	help
 	  This option enables the workaround for the 720789 Cortex-A9 (prior to
 	  r2p0) erratum. A faulty ASID can be sent to the other CPUs for the
@@ -1256,7 +1262,7 @@ config ARM_ERRATA_720789
 	  entries regardless of the ASID.
 
 config PL310_ERRATA_727915
-	bool "Background Clean & Invalidate by Way operation can cause data corruption"
+	bool "PL310 errata: Background Clean & Invalidate by Way operation can cause data corruption"
 	depends on CACHE_L2X0
 	help
 	  PL310 implements the Clean & Invalidate by Way L2 cache maintenance
@@ -1281,7 +1287,7 @@ config ARM_ERRATA_743622
 
 config ARM_ERRATA_751472
 	bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation"
-	depends on CPU_V7 && SMP
+	depends on CPU_V7
 	help
 	  This option enables the workaround for the 751472 Cortex-A9 (prior
 	  to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the
@@ -1289,8 +1295,8 @@ config ARM_ERRATA_751472
 	  operation is received by a CPU before the ICIALLUIS has completed,
 	  potentially leading to corrupted entries in the cache or TLB.
 
-config ARM_ERRATA_753970
-	bool "ARM errata: cache sync operation may be faulty"
+config PL310_ERRATA_753970
+	bool "PL310 errata: cache sync operation may be faulty"
 	depends on CACHE_PL310
 	help
 	  This option enables the workaround for the 753970 PL310 (r3p0) erratum.
@@ -1352,6 +1358,18 @@ config ARM_ERRATA_764369
 	  relevant cache maintenance functions and sets a specific bit
 	  in the diagnostic control register of the SCU.
 
+config PL310_ERRATA_769419
+	bool "PL310 errata: no automatic Store Buffer drain"
+	depends on CACHE_L2X0
+	help
+	  On revisions of the PL310 prior to r3p2, the Store Buffer does
+	  not automatically drain. This can cause normal, non-cacheable
+	  writes to be retained when the memory system is idle, leading
+	  to suboptimal I/O performance for drivers using coherent DMA.
+	  This option adds a write barrier to the cpu_idle loop so that,
+	  on systems with an outer cache, the store buffer is drained
+	  explicitly.
+
 endmenu
 
 source "arch/arm/common/Kconfig"
@@ -1422,14 +1440,20 @@ menu "Kernel Features"
 
 source "kernel/time/Kconfig"
 
+config HAVE_SMP
+	bool
+	help
+	  This option should be selected by machines which have an SMP-
+	  capable CPU.
+
+	  The only effect of this option is to make the SMP-related
+	  options available to the user for configuration.
+
 config SMP
 	bool "Symmetric Multi-Processing"
 	depends on CPU_V6K || CPU_V7
 	depends on GENERIC_CLOCKEVENTS
-	depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \
-		 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
-		 ARCH_EXYNOS4 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \
-		 ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE || ARCH_HIGHBANK || SOC_IMX6Q
+	depends on HAVE_SMP
 	depends on MMU
 	select USE_GENERIC_SMP_HELPERS
 	select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP
@@ -1547,6 +1571,16 @@ config LOCAL_TIMERS
 	  accounting to be spread across the timer interval, preventing a
 	  "thundering herd" at every timer tick.
 
+config ARCH_NR_GPIO
+	int
+	default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
+	default 350 if ARCH_U8500
+	default 0
+	help
+	  Maximum number of GPIOs in the system.
+
+	  If unsure, leave the default value.
+
 source kernel/Kconfig.preempt
 
 config HZ
@@ -1959,7 +1993,7 @@ endchoice
 
 config XIP_KERNEL
 	bool "Kernel Execute-In-Place from ROM"
-	depends on !ZBOOT_ROM
+	depends on !ZBOOT_ROM && !ARM_LPAE
 	help
 	  Execute-In-Place allows the kernel to run from non-volatile storage
 	  directly addressable by the CPU, such as NOR flash. This saves RAM
@@ -1989,7 +2023,7 @@ config XIP_PHYS_ADDR
 
 config KEXEC
 	bool "Kexec system call (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	depends on EXPERIMENTAL && (!SMP || HOTPLUG_CPU)
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index dfcf3b0..40319d9 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -184,7 +184,6 @@ machine-$(CONFIG_ARCH_EXYNOS4)		:= exynos
 machine-$(CONFIG_ARCH_SA1100)		:= sa1100
 machine-$(CONFIG_ARCH_SHARK)		:= shark
 machine-$(CONFIG_ARCH_SHMOBILE) 	:= shmobile
-machine-$(CONFIG_ARCH_TCC8K)		:= tcc8k
 machine-$(CONFIG_ARCH_TEGRA)		:= tegra
 machine-$(CONFIG_ARCH_U300)		:= u300
 machine-$(CONFIG_ARCH_U8500)		:= ux500
@@ -204,7 +203,6 @@ machine-$(CONFIG_ARCH_ZYNQ)		:= zynq
 plat-$(CONFIG_ARCH_MXC)		:= mxc
 plat-$(CONFIG_ARCH_OMAP)	:= omap
 plat-$(CONFIG_ARCH_S3C64XX)	:= samsung
-plat-$(CONFIG_ARCH_TCC_926)	:= tcc
 plat-$(CONFIG_ARCH_ZYNQ)	:= versatile
 plat-$(CONFIG_PLAT_IOP)		:= iop
 plat-$(CONFIG_PLAT_NOMADIK)	:= nomadik
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 21f56ff..cf0a64c 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -126,7 +126,8 @@ ccflags-y := -fpic -fno-builtin -I$(obj)
 asflags-y := -Wa,-march=all
 
 # Supply kernel BSS size to the decompressor via a linker symbol.
-KBSS_SZ = $(shell size $(obj)/../../../../vmlinux | awk 'END{print $$3}')
+KBSS_SZ = $(shell $(CROSS_COMPILE)size $(obj)/../../../../vmlinux | \
+		awk 'END{print $$3}')
 LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ)
 # Supply ZRELADDR to the decompressor via a linker symbol.
 ifneq ($(CONFIG_AUTO_ZRELADDR),y)
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index c2effc9..c5d6025 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -659,6 +659,7 @@ __armv7_mmu_cache_on:
 		mcrne	p15, 0, r3, c2, c0, 0	@ load page table pointer
 		mcrne	p15, 0, r1, c3, c0, 0	@ load domain access control
 #endif
+		mcr	p15, 0, r0, c7, c5, 4	@ ISB
 		mcr	p15, 0, r0, c1, c0, 0	@ load control register
 		mrc	p15, 0, r0, c1, c0, 0	@ and read it back
 		mov	r0, #0
diff --git a/arch/arm/boot/dts/testcases/tests-phandle.dtsi b/arch/arm/boot/dts/testcases/tests-phandle.dtsi
new file mode 100644
index 0000000..ec0c4e6
--- /dev/null
+++ b/arch/arm/boot/dts/testcases/tests-phandle.dtsi
@@ -0,0 +1,37 @@
+
+/ {
+	testcase-data {
+		phandle-tests {
+			provider0: provider0 {
+				#phandle-cells = <0>;
+			};
+
+			provider1: provider1 {
+				#phandle-cells = <1>;
+			};
+
+			provider2: provider2 {
+				#phandle-cells = <2>;
+			};
+
+			provider3: provider3 {
+				#phandle-cells = <3>;
+			};
+
+			consumer-a {
+				phandle-list =	<&provider1 1>,
+						<&provider2 2 0>,
+						<0>,
+						<&provider3 4 4 3>,
+						<&provider2 5 100>,
+						<&provider0>,
+						<&provider1 7>;
+				phandle-list-names = "first", "second", "third";
+
+				phandle-list-bad-phandle = <12345678 0 0>;
+				phandle-list-bad-args = <&provider2 1 0>,
+							<&provider3 0>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/testcases/tests.dtsi b/arch/arm/boot/dts/testcases/tests.dtsi
new file mode 100644
index 0000000..a7c5067
--- /dev/null
+++ b/arch/arm/boot/dts/testcases/tests.dtsi
@@ -0,0 +1 @@
+/include/ "tests-phandle.dtsi"
diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts
index 8a614e3..1664610 100644
--- a/arch/arm/boot/dts/versatile-pb.dts
+++ b/arch/arm/boot/dts/versatile-pb.dts
@@ -46,3 +46,5 @@
 		};
 	};
 };
+
+/include/ "testcases/tests.dtsi"
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index 74df9ca..81a933e 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -1,8 +1,14 @@
 config ARM_GIC
 	select IRQ_DOMAIN
+	select MULTI_IRQ_HANDLER
+	bool
+
+config GIC_NON_BANKED
 	bool
 
 config ARM_VIC
+	select IRQ_DOMAIN
+	select MULTI_IRQ_HANDLER
 	bool
 
 config ARM_VIC_NR
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index 0e6ae47..b2dc2dd 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -40,13 +40,36 @@
 #include <linux/slab.h>
 
 #include <asm/irq.h>
+#include <asm/exception.h>
 #include <asm/mach/irq.h>
 #include <asm/hardware/gic.h>
 
-static DEFINE_RAW_SPINLOCK(irq_controller_lock);
+union gic_base {
+	void __iomem *common_base;
+	void __percpu __iomem **percpu_base;
+};
+
+struct gic_chip_data {
+	unsigned int irq_offset;
+	union gic_base dist_base;
+	union gic_base cpu_base;
+#ifdef CONFIG_CPU_PM
+	u32 saved_spi_enable[DIV_ROUND_UP(1020, 32)];
+	u32 saved_spi_conf[DIV_ROUND_UP(1020, 16)];
+	u32 saved_spi_target[DIV_ROUND_UP(1020, 4)];
+	u32 __percpu *saved_ppi_enable;
+	u32 __percpu *saved_ppi_conf;
+#endif
+#ifdef CONFIG_IRQ_DOMAIN
+	struct irq_domain domain;
+#endif
+	unsigned int gic_irqs;
+#ifdef CONFIG_GIC_NON_BANKED
+	void __iomem *(*get_base)(union gic_base *);
+#endif
+};
 
-/* Address of GIC 0 CPU interface */
-void __iomem *gic_cpu_base_addr __read_mostly;
+static DEFINE_RAW_SPINLOCK(irq_controller_lock);
 
 /*
  * Supported arch specific GIC irq extension.
@@ -67,16 +90,48 @@ struct irq_chip gic_arch_extn = {
 
 static struct gic_chip_data gic_data[MAX_GIC_NR] __read_mostly;
 
+#ifdef CONFIG_GIC_NON_BANKED
+static void __iomem *gic_get_percpu_base(union gic_base *base)
+{
+	return *__this_cpu_ptr(base->percpu_base);
+}
+
+static void __iomem *gic_get_common_base(union gic_base *base)
+{
+	return base->common_base;
+}
+
+static inline void __iomem *gic_data_dist_base(struct gic_chip_data *data)
+{
+	return data->get_base(&data->dist_base);
+}
+
+static inline void __iomem *gic_data_cpu_base(struct gic_chip_data *data)
+{
+	return data->get_base(&data->cpu_base);
+}
+
+static inline void gic_set_base_accessor(struct gic_chip_data *data,
+					 void __iomem *(*f)(union gic_base *))
+{
+	data->get_base = f;
+}
+#else
+#define gic_data_dist_base(d)	((d)->dist_base.common_base)
+#define gic_data_cpu_base(d)	((d)->cpu_base.common_base)
+#define gic_set_base_accessor(d,f)
+#endif
+
 static inline void __iomem *gic_dist_base(struct irq_data *d)
 {
 	struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
-	return gic_data->dist_base;
+	return gic_data_dist_base(gic_data);
 }
 
 static inline void __iomem *gic_cpu_base(struct irq_data *d)
 {
 	struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
-	return gic_data->cpu_base;
+	return gic_data_cpu_base(gic_data);
 }
 
 static inline unsigned int gic_irq(struct irq_data *d)
@@ -215,6 +270,32 @@ static int gic_set_wake(struct irq_data *d, unsigned int on)
 #define gic_set_wake	NULL
 #endif
 
+asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
+{
+	u32 irqstat, irqnr;
+	struct gic_chip_data *gic = &gic_data[0];
+	void __iomem *cpu_base = gic_data_cpu_base(gic);
+
+	do {
+		irqstat = readl_relaxed(cpu_base + GIC_CPU_INTACK);
+		irqnr = irqstat & ~0x1c00;
+
+		if (likely(irqnr > 15 && irqnr < 1021)) {
+			irqnr = irq_domain_to_irq(&gic->domain, irqnr);
+			handle_IRQ(irqnr, regs);
+			continue;
+		}
+		if (irqnr < 16) {
+			writel_relaxed(irqstat, cpu_base + GIC_CPU_EOI);
+#ifdef CONFIG_SMP
+			handle_IPI(irqnr, regs);
+#endif
+			continue;
+		}
+		break;
+	} while (1);
+}
+
 static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
 {
 	struct gic_chip_data *chip_data = irq_get_handler_data(irq);
@@ -225,7 +306,7 @@ static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
 	chained_irq_enter(chip, desc);
 
 	raw_spin_lock(&irq_controller_lock);
-	status = readl_relaxed(chip_data->cpu_base + GIC_CPU_INTACK);
+	status = readl_relaxed(gic_data_cpu_base(chip_data) + GIC_CPU_INTACK);
 	raw_spin_unlock(&irq_controller_lock);
 
 	gic_irq = (status & 0x3ff);
@@ -270,7 +351,7 @@ static void __init gic_dist_init(struct gic_chip_data *gic)
 	u32 cpumask;
 	unsigned int gic_irqs = gic->gic_irqs;
 	struct irq_domain *domain = &gic->domain;
-	void __iomem *base = gic->dist_base;
+	void __iomem *base = gic_data_dist_base(gic);
 	u32 cpu = 0;
 
 #ifdef CONFIG_SMP
@@ -330,8 +411,8 @@ static void __init gic_dist_init(struct gic_chip_data *gic)
 
 static void __cpuinit gic_cpu_init(struct gic_chip_data *gic)
 {
-	void __iomem *dist_base = gic->dist_base;
-	void __iomem *base = gic->cpu_base;
+	void __iomem *dist_base = gic_data_dist_base(gic);
+	void __iomem *base = gic_data_cpu_base(gic);
 	int i;
 
 	/*
@@ -368,7 +449,7 @@ static void gic_dist_save(unsigned int gic_nr)
 		BUG();
 
 	gic_irqs = gic_data[gic_nr].gic_irqs;
-	dist_base = gic_data[gic_nr].dist_base;
+	dist_base = gic_data_dist_base(&gic_data[gic_nr]);
 
 	if (!dist_base)
 		return;
@@ -403,7 +484,7 @@ static void gic_dist_restore(unsigned int gic_nr)
 		BUG();
 
 	gic_irqs = gic_data[gic_nr].gic_irqs;
-	dist_base = gic_data[gic_nr].dist_base;
+	dist_base = gic_data_dist_base(&gic_data[gic_nr]);
 
 	if (!dist_base)
 		return;
@@ -439,8 +520,8 @@ static void gic_cpu_save(unsigned int gic_nr)
 	if (gic_nr >= MAX_GIC_NR)
 		BUG();
 
-	dist_base = gic_data[gic_nr].dist_base;
-	cpu_base = gic_data[gic_nr].cpu_base;
+	dist_base = gic_data_dist_base(&gic_data[gic_nr]);
+	cpu_base = gic_data_cpu_base(&gic_data[gic_nr]);
 
 	if (!dist_base || !cpu_base)
 		return;
@@ -465,8 +546,8 @@ static void gic_cpu_restore(unsigned int gic_nr)
 	if (gic_nr >= MAX_GIC_NR)
 		BUG();
 
-	dist_base = gic_data[gic_nr].dist_base;
-	cpu_base = gic_data[gic_nr].cpu_base;
+	dist_base = gic_data_dist_base(&gic_data[gic_nr]);
+	cpu_base = gic_data_cpu_base(&gic_data[gic_nr]);
 
 	if (!dist_base || !cpu_base)
 		return;
@@ -491,6 +572,11 @@ static int gic_notifier(struct notifier_block *self, unsigned long cmd,	void *v)
 	int i;
 
 	for (i = 0; i < MAX_GIC_NR; i++) {
+#ifdef CONFIG_GIC_NON_BANKED
+		/* Skip over unused GICs */
+		if (!gic_data[i].get_base)
+			continue;
+#endif
 		switch (cmd) {
 		case CPU_PM_ENTER:
 			gic_cpu_save(i);
@@ -526,7 +612,8 @@ static void __init gic_pm_init(struct gic_chip_data *gic)
 		sizeof(u32));
 	BUG_ON(!gic->saved_ppi_conf);
 
-	cpu_pm_register_notifier(&gic_notifier_block);
+	if (gic == &gic_data[0])
+		cpu_pm_register_notifier(&gic_notifier_block);
 }
 #else
 static void __init gic_pm_init(struct gic_chip_data *gic)
@@ -563,8 +650,9 @@ const struct irq_domain_ops gic_irq_domain_ops = {
 #endif
 };
 
-void __init gic_init(unsigned int gic_nr, int irq_start,
-	void __iomem *dist_base, void __iomem *cpu_base)
+void __init gic_init_bases(unsigned int gic_nr, int irq_start,
+			   void __iomem *dist_base, void __iomem *cpu_base,
+			   u32 percpu_offset)
 {
 	struct gic_chip_data *gic;
 	struct irq_domain *domain;
@@ -574,26 +662,55 @@ void __init gic_init(unsigned int gic_nr, int irq_start,
 
 	gic = &gic_data[gic_nr];
 	domain = &gic->domain;
-	gic->dist_base = dist_base;
-	gic->cpu_base = cpu_base;
+#ifdef CONFIG_GIC_NON_BANKED
+	if (percpu_offset) { /* Frankein-GIC without banked registers... */
+		unsigned int cpu;
+
+		gic->dist_base.percpu_base = alloc_percpu(void __iomem *);
+		gic->cpu_base.percpu_base = alloc_percpu(void __iomem *);
+		if (WARN_ON(!gic->dist_base.percpu_base ||
+			    !gic->cpu_base.percpu_base)) {
+			free_percpu(gic->dist_base.percpu_base);
+			free_percpu(gic->cpu_base.percpu_base);
+			return;
+		}
+
+		for_each_possible_cpu(cpu) {
+			unsigned long offset = percpu_offset * cpu_logical_map(cpu);
+			*per_cpu_ptr(gic->dist_base.percpu_base, cpu) = dist_base + offset;
+			*per_cpu_ptr(gic->cpu_base.percpu_base, cpu) = cpu_base + offset;
+		}
+
+		gic_set_base_accessor(gic, gic_get_percpu_base);
+	} else
+#endif
+	{			/* Normal, sane GIC... */
+		WARN(percpu_offset,
+		     "GIC_NON_BANKED not enabled, ignoring %08x offset!",
+		     percpu_offset);
+		gic->dist_base.common_base = dist_base;
+		gic->cpu_base.common_base = cpu_base;
+		gic_set_base_accessor(gic, gic_get_common_base);
+	}
 
 	/*
 	 * For primary GICs, skip over SGIs.
 	 * For secondary GICs, skip over PPIs, too.
 	 */
+	domain->hwirq_base = 32;
 	if (gic_nr == 0) {
-		gic_cpu_base_addr = cpu_base;
-		domain->hwirq_base = 16;
-		if (irq_start > 0)
-			irq_start = (irq_start & ~31) + 16;
-	} else
-		domain->hwirq_base = 32;
+		if ((irq_start & 31) > 0) {
+			domain->hwirq_base = 16;
+			if (irq_start != -1)
+				irq_start = (irq_start & ~31) + 16;
+		}
+	}
 
 	/*
 	 * Find out how many interrupts are supported.
 	 * The GIC only supports up to 1020 interrupt sources.
 	 */
-	gic_irqs = readl_relaxed(dist_base + GIC_DIST_CTR) & 0x1f;
+	gic_irqs = readl_relaxed(gic_data_dist_base(gic) + GIC_DIST_CTR) & 0x1f;
 	gic_irqs = (gic_irqs + 1) * 32;
 	if (gic_irqs > 1020)
 		gic_irqs = 1020;
@@ -641,7 +758,7 @@ void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
 	dsb();
 
 	/* this always happens on GIC0 */
-	writel_relaxed(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT);
+	writel_relaxed(map << 16 | irq, gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT);
 }
 #endif
 
@@ -652,6 +769,7 @@ int __init gic_of_init(struct device_node *node, struct device_node *parent)
 {
 	void __iomem *cpu_base;
 	void __iomem *dist_base;
+	u32 percpu_offset;
 	int irq;
 	struct irq_domain *domain = &gic_data[gic_cnt].domain;
 
@@ -664,9 +782,12 @@ int __init gic_of_init(struct device_node *node, struct device_node *parent)
 	cpu_base = of_iomap(node, 1);
 	WARN(!cpu_base, "unable to map gic cpu registers\n");
 
+	if (of_property_read_u32(node, "cpu-offset", &percpu_offset))
+		percpu_offset = 0;
+
 	domain->of_node = of_node_get(node);
 
-	gic_init(gic_cnt, -1, dist_base, cpu_base);
+	gic_init_bases(gic_cnt, -1, dist_base, cpu_base, percpu_offset);
 
 	if (parent) {
 		irq = irq_of_parse_and_map(node, 0);
diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c
index 7129cfb..d8e44a4 100644
--- a/arch/arm/common/pl330.c
+++ b/arch/arm/common/pl330.c
@@ -221,17 +221,6 @@
  */
 #define MCODE_BUFF_PER_REQ	256
 
-/*
- * Mark a _pl330_req as free.
- * We do it by writing DMAEND as the first instruction
- * because no valid request is going to have DMAEND as
- * its first instruction to execute.
- */
-#define MARK_FREE(req)	do { \
-				_emit_END(0, (req)->mc_cpu); \
-				(req)->mc_len = 0; \
-			} while (0)
-
 /* If the _pl330_req is available to the client */
 #define IS_FREE(req)	(*((u8 *)((req)->mc_cpu)) == CMD_DMAEND)
 
@@ -301,8 +290,10 @@ struct pl330_thread {
 	struct pl330_dmac *dmac;
 	/* Only two at a time */
 	struct _pl330_req req[2];
-	/* Index of the last submitted request */
+	/* Index of the last enqueued request */
 	unsigned lstenq;
+	/* Index of the last submitted request or -1 if the DMA is stopped */
+	int req_running;
 };
 
 enum pl330_dmac_state {
@@ -778,6 +769,22 @@ static inline void _execute_DBGINSN(struct pl330_thread *thrd,
 	writel(0, regs + DBGCMD);
 }
 
+/*
+ * Mark a _pl330_req as free.
+ * We do it by writing DMAEND as the first instruction
+ * because no valid request is going to have DMAEND as
+ * its first instruction to execute.
+ */
+static void mark_free(struct pl330_thread *thrd, int idx)
+{
+	struct _pl330_req *req = &thrd->req[idx];
+
+	_emit_END(0, req->mc_cpu);
+	req->mc_len = 0;
+
+	thrd->req_running = -1;
+}
+
 static inline u32 _state(struct pl330_thread *thrd)
 {
 	void __iomem *regs = thrd->dmac->pinfo->base;
@@ -836,31 +843,6 @@ static inline u32 _state(struct pl330_thread *thrd)
 	}
 }
 
-/* If the request 'req' of thread 'thrd' is currently active */
-static inline bool _req_active(struct pl330_thread *thrd,
-		struct _pl330_req *req)
-{
-	void __iomem *regs = thrd->dmac->pinfo->base;
-	u32 buf = req->mc_bus, pc = readl(regs + CPC(thrd->id));
-
-	if (IS_FREE(req))
-		return false;
-
-	return (pc >= buf && pc <= buf + req->mc_len) ? true : false;
-}
-
-/* Returns 0 if the thread is inactive, ID of active req + 1 otherwise */
-static inline unsigned _thrd_active(struct pl330_thread *thrd)
-{
-	if (_req_active(thrd, &thrd->req[0]))
-		return 1; /* First req active */
-
-	if (_req_active(thrd, &thrd->req[1]))
-		return 2; /* Second req active */
-
-	return 0;
-}
-
 static void _stop(struct pl330_thread *thrd)
 {
 	void __iomem *regs = thrd->dmac->pinfo->base;
@@ -892,17 +874,22 @@ static bool _trigger(struct pl330_thread *thrd)
 	struct _arg_GO go;
 	unsigned ns;
 	u8 insn[6] = {0, 0, 0, 0, 0, 0};
+	int idx;
 
 	/* Return if already ACTIVE */
 	if (_state(thrd) != PL330_STATE_STOPPED)
 		return true;
 
-	if (!IS_FREE(&thrd->req[1 - thrd->lstenq]))
-		req = &thrd->req[1 - thrd->lstenq];
-	else if (!IS_FREE(&thrd->req[thrd->lstenq]))
-		req = &thrd->req[thrd->lstenq];
-	else
-		req = NULL;
+	idx = 1 - thrd->lstenq;
+	if (!IS_FREE(&thrd->req[idx]))
+		req = &thrd->req[idx];
+	else {
+		idx = thrd->lstenq;
+		if (!IS_FREE(&thrd->req[idx]))
+			req = &thrd->req[idx];
+		else
+			req = NULL;
+	}
 
 	/* Return if no request */
 	if (!req || !req->r)
@@ -933,6 +920,8 @@ static bool _trigger(struct pl330_thread *thrd)
 	/* Only manager can execute GO */
 	_execute_DBGINSN(thrd, insn, true);
 
+	thrd->req_running = idx;
+
 	return true;
 }
 
@@ -1211,8 +1200,8 @@ static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc)
 	ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT);
 	ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT);
 
-	ccr |= (rqc->dcctl << CC_SRCCCTRL_SHFT);
-	ccr |= (rqc->scctl << CC_DSTCCTRL_SHFT);
+	ccr |= (rqc->scctl << CC_SRCCCTRL_SHFT);
+	ccr |= (rqc->dcctl << CC_DSTCCTRL_SHFT);
 
 	ccr |= (rqc->swap << CC_SWAP_SHFT);
 
@@ -1382,8 +1371,8 @@ static void pl330_dotask(unsigned long data)
 
 			thrd->req[0].r = NULL;
 			thrd->req[1].r = NULL;
-			MARK_FREE(&thrd->req[0]);
-			MARK_FREE(&thrd->req[1]);
+			mark_free(thrd, 0);
+			mark_free(thrd, 1);
 
 			/* Clear the reset flag */
 			pl330->dmac_tbd.reset_chan &= ~(1 << i);
@@ -1461,14 +1450,12 @@ int pl330_update(const struct pl330_info *pi)
 
 			thrd = &pl330->channels[id];
 
-			active = _thrd_active(thrd);
-			if (!active) /* Aborted */
+			active = thrd->req_running;
+			if (active == -1) /* Aborted */
 				continue;
 
-			active -= 1;
-
 			rqdone = &thrd->req[active];
-			MARK_FREE(rqdone);
+			mark_free(thrd, active);
 
 			/* Get going again ASAP */
 			_start(thrd);
@@ -1480,13 +1467,19 @@ int pl330_update(const struct pl330_info *pi)
 
 	/* Now that we are in no hurry, do the callbacks */
 	while (!list_empty(&pl330->req_done)) {
+		struct pl330_req *r;
+
 		rqdone = container_of(pl330->req_done.next,
 					struct _pl330_req, rqd);
 
 		list_del_init(&rqdone->rqd);
 
+		/* Detach the req */
+		r = rqdone->r;
+		rqdone->r = NULL;
+
 		spin_unlock_irqrestore(&pl330->lock, flags);
-		_callback(rqdone->r, PL330_ERR_NONE);
+		_callback(r, PL330_ERR_NONE);
 		spin_lock_irqsave(&pl330->lock, flags);
 	}
 
@@ -1509,7 +1502,7 @@ int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op)
 	struct pl330_thread *thrd = ch_id;
 	struct pl330_dmac *pl330;
 	unsigned long flags;
-	int ret = 0, active;
+	int ret = 0, active = thrd->req_running;
 
 	if (!thrd || thrd->free || thrd->dmac->state == DYING)
 		return -EINVAL;
@@ -1525,28 +1518,24 @@ int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op)
 
 		thrd->req[0].r = NULL;
 		thrd->req[1].r = NULL;
-		MARK_FREE(&thrd->req[0]);
-		MARK_FREE(&thrd->req[1]);
+		mark_free(thrd, 0);
+		mark_free(thrd, 1);
 		break;
 
 	case PL330_OP_ABORT:
-		active = _thrd_active(thrd);
-
 		/* Make sure the channel is stopped */
 		_stop(thrd);
 
 		/* ABORT is only for the active req */
-		if (!active)
+		if (active == -1)
 			break;
 
-		active--;
-
 		thrd->req[active].r = NULL;
-		MARK_FREE(&thrd->req[active]);
+		mark_free(thrd, active);
 
 		/* Start the next */
 	case PL330_OP_START:
-		if (!_thrd_active(thrd) && !_start(thrd))
+		if ((active == -1) && !_start(thrd))
 			ret = -EIO;
 		break;
 
@@ -1587,14 +1576,13 @@ int pl330_chan_status(void *ch_id, struct pl330_chanstatus *pstatus)
 	else
 		pstatus->faulting = false;
 
-	active = _thrd_active(thrd);
+	active = thrd->req_running;
 
-	if (!active) {
+	if (active == -1) {
 		/* Indicate that the thread is not running */
 		pstatus->top_req = NULL;
 		pstatus->wait_req = NULL;
 	} else {
-		active--;
 		pstatus->top_req = thrd->req[active].r;
 		pstatus->wait_req = !IS_FREE(&thrd->req[1 - active])
 					? thrd->req[1 - active].r : NULL;
@@ -1623,6 +1611,11 @@ static inline int _alloc_event(struct pl330_thread *thrd)
 	return -1;
 }
 
+static bool _chan_ns(const struct pl330_info *pi, int i)
+{
+	return pi->pcfg.irq_ns & (1 << i);
+}
+
 /* Upon success, returns IdentityToken for the
  * allocated channel, NULL otherwise.
  */
@@ -1647,15 +1640,16 @@ void *pl330_request_channel(const struct pl330_info *pi)
 
 	for (i = 0; i < chans; i++) {
 		thrd = &pl330->channels[i];
-		if (thrd->free) {
+		if ((thrd->free) && (!_manager_ns(thrd) ||
+					_chan_ns(pi, i))) {
 			thrd->ev = _alloc_event(thrd);
 			if (thrd->ev >= 0) {
 				thrd->free = false;
 				thrd->lstenq = 1;
 				thrd->req[0].r = NULL;
-				MARK_FREE(&thrd->req[0]);
+				mark_free(thrd, 0);
 				thrd->req[1].r = NULL;
-				MARK_FREE(&thrd->req[1]);
+				mark_free(thrd, 1);
 				break;
 			}
 		}
@@ -1761,14 +1755,14 @@ static inline void _reset_thread(struct pl330_thread *thrd)
 	thrd->req[0].mc_bus = pl330->mcode_bus
 				+ (thrd->id * pi->mcbufsz);
 	thrd->req[0].r = NULL;
-	MARK_FREE(&thrd->req[0]);
+	mark_free(thrd, 0);
 
 	thrd->req[1].mc_cpu = thrd->req[0].mc_cpu
 				+ pi->mcbufsz / 2;
 	thrd->req[1].mc_bus = thrd->req[0].mc_bus
 				+ pi->mcbufsz / 2;
 	thrd->req[1].r = NULL;
-	MARK_FREE(&thrd->req[1]);
+	mark_free(thrd, 1);
 }
 
 static int dmac_alloc_threads(struct pl330_dmac *pl330)
diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c
index 2393b5b..8794a34 100644
--- a/arch/arm/common/timer-sp.c
+++ b/arch/arm/common/timer-sp.c
@@ -143,7 +143,6 @@ static int sp804_set_next_event(unsigned long next,
 }
 
 static struct clock_event_device sp804_clockevent = {
-	.shift		= 32,
 	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
 	.set_mode	= sp804_set_mode,
 	.set_next_event	= sp804_set_next_event,
@@ -169,13 +168,9 @@ void __init sp804_clockevents_init(void __iomem *base, unsigned int irq,
 
 	clkevt_base = base;
 	clkevt_reload = DIV_ROUND_CLOSEST(rate, HZ);
-
 	evt->name = name;
 	evt->irq = irq;
-	evt->mult = div_sc(rate, NSEC_PER_SEC, evt->shift);
-	evt->max_delta_ns = clockevent_delta2ns(0xffffffff, evt);
-	evt->min_delta_ns = clockevent_delta2ns(0xf, evt);
 
 	setup_irq(irq, &sp804_timer_irq);
-	clockevents_register_device(evt);
+	clockevents_config_and_register(evt, rate, 0xf, 0xffffffff);
 }
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index 01f18a4..dcb004a 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -19,17 +19,22 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/io.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <linux/syscore_ops.h>
 #include <linux/device.h>
 #include <linux/amba/bus.h>
 
+#include <asm/exception.h>
 #include <asm/mach/irq.h>
 #include <asm/hardware/vic.h>
 
-#ifdef CONFIG_PM
 /**
  * struct vic_device - VIC PM device
  * @irq: The IRQ number for the base of the VIC.
@@ -40,6 +45,7 @@
  * @int_enable: Save for VIC_INT_ENABLE.
  * @soft_int: Save for VIC_INT_SOFT.
  * @protect: Save for VIC_PROTECT.
+ * @domain: The IRQ domain for the VIC.
  */
 struct vic_device {
 	void __iomem	*base;
@@ -50,13 +56,13 @@ struct vic_device {
 	u32		int_enable;
 	u32		soft_int;
 	u32		protect;
+	struct irq_domain domain;
 };
 
 /* we cannot allocate memory when VICs are initially registered */
 static struct vic_device vic_devices[CONFIG_ARM_VIC_NR];
 
 static int vic_id;
-#endif /* CONFIG_PM */
 
 /**
  * vic_init2 - common initialisation code
@@ -156,39 +162,50 @@ static int __init vic_pm_init(void)
 	return 0;
 }
 late_initcall(vic_pm_init);
+#endif /* CONFIG_PM */
 
 /**
- * vic_pm_register - Register a VIC for later power management control
+ * vic_register() - Register a VIC.
  * @base: The base address of the VIC.
  * @irq: The base IRQ for the VIC.
  * @resume_sources: bitmask of interrupts allowed for resume sources.
+ * @node: The device tree node associated with the VIC.
  *
  * Register the VIC with the system device tree so that it can be notified
  * of suspend and resume requests and ensure that the correct actions are
  * taken to re-instate the settings on resume.
+ *
+ * This also configures the IRQ domain for the VIC.
  */
-static void __init vic_pm_register(void __iomem *base, unsigned int irq, u32 resume_sources)
+static void __init vic_register(void __iomem *base, unsigned int irq,
+				u32 resume_sources, struct device_node *node)
 {
 	struct vic_device *v;
 
-	if (vic_id >= ARRAY_SIZE(vic_devices))
+	if (vic_id >= ARRAY_SIZE(vic_devices)) {
 		printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
-	else {
-		v = &vic_devices[vic_id];
-		v->base = base;
-		v->resume_sources = resume_sources;
-		v->irq = irq;
-		vic_id++;
+		return;
 	}
+
+	v = &vic_devices[vic_id];
+	v->base = base;
+	v->resume_sources = resume_sources;
+	v->irq = irq;
+	vic_id++;
+
+	v->domain.irq_base = irq;
+	v->domain.nr_irq = 32;
+#ifdef CONFIG_OF_IRQ
+	v->domain.of_node = of_node_get(node);
+#endif /* CONFIG_OF */
+	v->domain.ops = &irq_domain_simple_ops;
+	irq_domain_add(&v->domain);
 }
-#else
-static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg1) { }
-#endif /* CONFIG_PM */
 
 static void vic_ack_irq(struct irq_data *d)
 {
 	void __iomem *base = irq_data_get_irq_chip_data(d);
-	unsigned int irq = d->irq & 31;
+	unsigned int irq = d->hwirq;
 	writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
 	/* moreover, clear the soft-triggered, in case it was the reason */
 	writel(1 << irq, base + VIC_INT_SOFT_CLEAR);
@@ -197,14 +214,14 @@ static void vic_ack_irq(struct irq_data *d)
 static void vic_mask_irq(struct irq_data *d)
 {
 	void __iomem *base = irq_data_get_irq_chip_data(d);
-	unsigned int irq = d->irq & 31;
+	unsigned int irq = d->hwirq;
 	writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
 }
 
 static void vic_unmask_irq(struct irq_data *d)
 {
 	void __iomem *base = irq_data_get_irq_chip_data(d);
-	unsigned int irq = d->irq & 31;
+	unsigned int irq = d->hwirq;
 	writel(1 << irq, base + VIC_INT_ENABLE);
 }
 
@@ -226,7 +243,7 @@ static struct vic_device *vic_from_irq(unsigned int irq)
 static int vic_set_wake(struct irq_data *d, unsigned int on)
 {
 	struct vic_device *v = vic_from_irq(d->irq);
-	unsigned int off = d->irq & 31;
+	unsigned int off = d->hwirq;
 	u32 bit = 1 << off;
 
 	if (!v)
@@ -301,7 +318,7 @@ static void __init vic_set_irq_sources(void __iomem *base,
  *  and 020 within the page. We call this "second block".
  */
 static void __init vic_init_st(void __iomem *base, unsigned int irq_start,
-				u32 vic_sources)
+			       u32 vic_sources, struct device_node *node)
 {
 	unsigned int i;
 	int vic_2nd_block = ((unsigned long)base & ~PAGE_MASK) != 0;
@@ -328,17 +345,12 @@ static void __init vic_init_st(void __iomem *base, unsigned int irq_start,
 	}
 
 	vic_set_irq_sources(base, irq_start, vic_sources);
+	vic_register(base, irq_start, 0, node);
 }
 
-/**
- * vic_init - initialise a vectored interrupt controller
- * @base: iomem base address
- * @irq_start: starting interrupt number, must be muliple of 32
- * @vic_sources: bitmask of interrupt sources to allow
- * @resume_sources: bitmask of interrupt sources to allow for resume
- */
-void __init vic_init(void __iomem *base, unsigned int irq_start,
-		     u32 vic_sources, u32 resume_sources)
+static void __init __vic_init(void __iomem *base, unsigned int irq_start,
+			      u32 vic_sources, u32 resume_sources,
+			      struct device_node *node)
 {
 	unsigned int i;
 	u32 cellid = 0;
@@ -356,7 +368,7 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 
 	switch(vendor) {
 	case AMBA_VENDOR_ST:
-		vic_init_st(base, irq_start, vic_sources);
+		vic_init_st(base, irq_start, vic_sources, node);
 		return;
 	default:
 		printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n");
@@ -375,5 +387,81 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 
 	vic_set_irq_sources(base, irq_start, vic_sources);
 
-	vic_pm_register(base, irq_start, resume_sources);
+	vic_register(base, irq_start, resume_sources, node);
+}
+
+/**
+ * vic_init() - initialise a vectored interrupt controller
+ * @base: iomem base address
+ * @irq_start: starting interrupt number, must be muliple of 32
+ * @vic_sources: bitmask of interrupt sources to allow
+ * @resume_sources: bitmask of interrupt sources to allow for resume
+ */
+void __init vic_init(void __iomem *base, unsigned int irq_start,
+		     u32 vic_sources, u32 resume_sources)
+{
+	__vic_init(base, irq_start, vic_sources, resume_sources, NULL);
+}
+
+#ifdef CONFIG_OF
+int __init vic_of_init(struct device_node *node, struct device_node *parent)
+{
+	void __iomem *regs;
+	int irq_base;
+
+	if (WARN(parent, "non-root VICs are not supported"))
+		return -EINVAL;
+
+	regs = of_iomap(node, 0);
+	if (WARN_ON(!regs))
+		return -EIO;
+
+	irq_base = irq_alloc_descs(-1, 0, 32, numa_node_id());
+	if (WARN_ON(irq_base < 0))
+		goto out_unmap;
+
+	__vic_init(regs, irq_base, ~0, ~0, node);
+
+	return 0;
+
+ out_unmap:
+	iounmap(regs);
+
+	return -EIO;
+}
+#endif /* CONFIG OF */
+
+/*
+ * Handle each interrupt in a single VIC.  Returns non-zero if we've
+ * handled at least one interrupt.  This does a single read of the
+ * status register and handles all interrupts in order from LSB first.
+ */
+static int handle_one_vic(struct vic_device *vic, struct pt_regs *regs)
+{
+	u32 stat, irq;
+	int handled = 0;
+
+	stat = readl_relaxed(vic->base + VIC_IRQ_STATUS);
+	while (stat) {
+		irq = ffs(stat) - 1;
+		handle_IRQ(irq_domain_to_irq(&vic->domain, irq), regs);
+		stat &= ~(1 << irq);
+		handled = 1;
+	}
+
+	return handled;
+}
+
+/*
+ * Keep iterating over all registered VIC's until there are no pending
+ * interrupts.
+ */
+asmlinkage void __exception_irq_entry vic_handle_irq(struct pt_regs *regs)
+{
+	int i, handled;
+
+	do {
+		for (i = 0, handled = 0; i < vic_id; ++i)
+			handled |= handle_one_vic(&vic_devices[i], regs);
+	} while (handled);
 }
diff --git a/arch/arm/configs/at91cap9adk_defconfig b/arch/arm/configs/at91cap9_defconfig
index ffb1edd..8826eb2 100644
--- a/arch/arm/configs/at91cap9adk_defconfig
+++ b/arch/arm/configs/at91cap9_defconfig
@@ -38,7 +38,6 @@ CONFIG_IP_PNP_RARP=y
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
@@ -52,16 +51,12 @@ CONFIG_MTD_NAND_ATMEL=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_SSC=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_KEYBOARD is not set
@@ -81,7 +76,6 @@ CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
 CONFIG_FB=y
 CONFIG_FB_ATMEL=y
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
@@ -99,7 +93,6 @@ CONFIG_MMC_AT91=m
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AT91SAM9=y
 CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
diff --git a/arch/arm/configs/at91rm9200_defconfig b/arch/arm/configs/at91rm9200_defconfig
index 38cb7c9..bbe4e1a 100644
--- a/arch/arm/configs/at91rm9200_defconfig
+++ b/arch/arm/configs/at91rm9200_defconfig
@@ -5,7 +5,6 @@ CONFIG_SYSVIPC=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
@@ -56,7 +55,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
@@ -75,18 +73,8 @@ CONFIG_IPV6_TUNNEL=m
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
 CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_AFS_PARTS=y
 CONFIG_MTD_CHAR=y
@@ -108,8 +96,6 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_TCLIB=y
-CONFIG_EEPROM_LEGACY=m
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=m
@@ -119,14 +105,23 @@ CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
 CONFIG_TUN=m
+CONFIG_ARM_AT91_ETHER=y
 CONFIG_PHYLIB=y
 CONFIG_DAVICOM_PHY=y
 CONFIG_SMSC_PHY=y
 CONFIG_MICREL_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+CONFIG_PPP=y
+CONFIG_PPP_BSDCOMP=y
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOE=m
+CONFIG_PPP_ASYNC=y
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
 CONFIG_USB_CATC=m
 CONFIG_USB_KAWETH=m
 CONFIG_USB_PEGASUS=m
@@ -139,18 +134,6 @@ CONFIG_USB_NET_RNDIS_HOST=m
 CONFIG_USB_ALI_M5632=y
 CONFIG_USB_AN2720=y
 CONFIG_USB_EPSON2888=y
-CONFIG_PPP=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=y
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=y
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
@@ -158,9 +141,9 @@ CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_LEGACY_PTY_COUNT=32
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=32
 CONFIG_HW_RANDOM=y
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
@@ -290,7 +273,6 @@ CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-CONFIG_SMB_FS=m
 CONFIG_CIFS=m
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_MAC_PARTITION=y
@@ -335,7 +317,6 @@ CONFIG_NLS_UTF8=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_FTRACE is not set
 CONFIG_CRYPTO_PCBC=y
 CONFIG_CRYPTO_SHA1=y
diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260_defconfig
index f8a9226..505b376 100644
--- a/arch/arm/configs/at91sam9260ek_defconfig
+++ b/arch/arm/configs/at91sam9260_defconfig
@@ -12,11 +12,23 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91SAM9260=y
+CONFIG_ARCH_AT91SAM9260_SAM9XE=y
 CONFIG_MACH_AT91SAM9260EK=y
+CONFIG_MACH_CAM60=y
+CONFIG_MACH_SAM9_L9260=y
+CONFIG_MACH_AFEB9260=y
+CONFIG_MACH_USB_A9260=y
+CONFIG_MACH_QIL_A9260=y
+CONFIG_MACH_CPU9260=y
+CONFIG_MACH_FLEXIBITY=y
+CONFIG_MACH_SNAPPER_9260=y
+CONFIG_MACH_AT91SAM_DT=y
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 # CONFIG_ARM_THUMB is not set
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
 CONFIG_FPE_NWFPE=y
 CONFIG_NET=y
@@ -33,12 +45,10 @@ CONFIG_IP_PNP_BOOTP=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_SSC=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
@@ -55,7 +65,6 @@ CONFIG_I2C_GPIO=y
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
 CONFIG_AT91SAM9X_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
 # CONFIG_USB_HID is not set
 CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
@@ -71,7 +80,6 @@ CONFIG_USB_G_SERIAL=m
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AT91SAM9=y
 CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
diff --git a/arch/arm/configs/at91sam9g20ek_defconfig b/arch/arm/configs/at91sam9g20_defconfig
index 9e90e6d..9123568 100644
--- a/arch/arm/configs/at91sam9g20ek_defconfig
+++ b/arch/arm/configs/at91sam9g20_defconfig
@@ -14,6 +14,15 @@ CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91SAM9G20=y
 CONFIG_MACH_AT91SAM9G20EK=y
 CONFIG_MACH_AT91SAM9G20EK_2MMC=y
+CONFIG_MACH_CPU9G20=y
+CONFIG_MACH_ACMENETUSFOXG20=y
+CONFIG_MACH_PORTUXG20=y
+CONFIG_MACH_STAMP9G20=y
+CONFIG_MACH_PCONTROL_G20=y
+CONFIG_MACH_GSIA18S=y
+CONFIG_MACH_USB_A9G20=y
+CONFIG_MACH_SNAPPER_9260=y
+CONFIG_MACH_AT91SAM_DT=y
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 # CONFIG_ARM_THUMB is not set
 CONFIG_AEABI=y
@@ -21,9 +30,10 @@ CONFIG_LEDS=y
 CONFIG_LEDS_CPU=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
 CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -37,8 +47,6 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
@@ -48,17 +56,13 @@ CONFIG_MTD_NAND_ATMEL=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_SSC=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
@@ -66,15 +70,14 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
+CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_HW_RANDOM=y
 CONFIG_SPI=y
 CONFIG_SPI_ATMEL=y
 CONFIG_SPI_SPIDEV=y
 # CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_SEQUENCER=y
@@ -82,7 +85,6 @@ CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
 CONFIG_SND_SEQUENCER_OSS=y
 # CONFIG_SND_VERBOSE_PROCFS is not set
-CONFIG_SND_AT73C213=y
 CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
@@ -105,7 +107,6 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AT91SAM9=y
 CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
diff --git a/arch/arm/configs/at91sam9g45_defconfig b/arch/arm/configs/at91sam9g45_defconfig
index c5876d2..606d48f 100644
--- a/arch/arm/configs/at91sam9g45_defconfig
+++ b/arch/arm/configs/at91sam9g45_defconfig
@@ -18,6 +18,7 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91SAM9G45=y
 CONFIG_MACH_AT91SAM9M10G45EK=y
+CONFIG_MACH_AT91SAM_DT=y
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 CONFIG_AT91_SLOW_CLOCK=y
 CONFIG_AEABI=y
@@ -73,11 +74,8 @@ CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
 CONFIG_MII=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_NET_ETHERNET=y
 CONFIG_MACB=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+CONFIG_DAVICOM_PHY=y
 CONFIG_LIBERTAS_THINFIRM=m
 CONFIG_LIBERTAS_THINFIRM_USB=m
 CONFIG_AT76C50X_USB=m
@@ -131,7 +129,6 @@ CONFIG_I2C_GPIO=y
 CONFIG_SPI=y
 CONFIG_SPI_ATMEL=y
 # CONFIG_HWMON is not set
-# CONFIG_MFD_SUPPORT is not set
 CONFIG_FB=y
 CONFIG_FB_ATMEL=y
 CONFIG_FB_UDL=m
diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rl_defconfig
index 75621e4..ad562ee 100644
--- a/arch/arm/configs/at91sam9rlek_defconfig
+++ b/arch/arm/configs/at91sam9rl_defconfig
@@ -23,8 +23,6 @@ CONFIG_NET=y
 CONFIG_UNIX=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
@@ -35,7 +33,6 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=4
 CONFIG_BLK_DEV_RAM_SIZE=24576
-CONFIG_ATMEL_SSC=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_MULTI_LUN=y
@@ -62,13 +59,11 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 CONFIG_AT91SAM9X_WATCHDOG=y
 CONFIG_FB=y
 CONFIG_FB_ATMEL=y
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_MMC=y
 CONFIG_MMC_AT91=m
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AT91SAM9=y
 CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig
index 227a477..d95763d 100644
--- a/arch/arm/configs/ezx_defconfig
+++ b/arch/arm/configs/ezx_defconfig
@@ -287,7 +287,7 @@ CONFIG_USB=y
 # CONFIG_USB_DEVICE_CLASS is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
 CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
 CONFIG_MMC=y
diff --git a/arch/arm/configs/imote2_defconfig b/arch/arm/configs/imote2_defconfig
index 176ec22..fd996bb 100644
--- a/arch/arm/configs/imote2_defconfig
+++ b/arch/arm/configs/imote2_defconfig
@@ -263,7 +263,7 @@ CONFIG_USB=y
 # CONFIG_USB_DEVICE_CLASS is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
 CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
 CONFIG_MMC=y
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index 11a4192..cf497ce 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -18,9 +18,10 @@ CONFIG_ARCH_MXC=y
 CONFIG_ARCH_IMX_V4_V5=y
 CONFIG_ARCH_MX1ADS=y
 CONFIG_MACH_SCB9328=y
+CONFIG_MACH_APF9328=y
 CONFIG_MACH_MX21ADS=y
 CONFIG_MACH_MX25_3DS=y
-CONFIG_MACH_EUKREA_CPUIMX25=y
+CONFIG_MACH_EUKREA_CPUIMX25SD=y
 CONFIG_MACH_MX27ADS=y
 CONFIG_MACH_PCM038=y
 CONFIG_MACH_CPUIMX27=y
@@ -72,17 +73,16 @@ CONFIG_MTD_CFI_GEOMETRY=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_MXC=y
 CONFIG_MTD_UBI=y
 CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_AT24=y
 CONFIG_EEPROM_AT25=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
 CONFIG_DM9000=y
+CONFIG_SMC91X=y
 CONFIG_SMC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+CONFIG_SMSC_PHY=y
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_KEYBOARD is not set
@@ -100,6 +100,7 @@ CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_IMX=y
 CONFIG_SPI=y
 CONFIG_SPI_IMX=y
+CONFIG_SPI_SPIDEV=y
 CONFIG_W1=y
 CONFIG_W1_MASTER_MXC=y
 CONFIG_W1_SLAVE_THERM=y
@@ -139,6 +140,7 @@ CONFIG_MMC=y
 CONFIG_MMC_MXC=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_MC13783=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig
index a88e64d..443675d 100644
--- a/arch/arm/configs/magician_defconfig
+++ b/arch/arm/configs/magician_defconfig
@@ -132,7 +132,7 @@ CONFIG_USB_MON=m
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_VBUS_DRAW=500
-CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
 CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
 CONFIG_USB_GADGETFS=m
diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig
index 7b63462..945a34f 100644
--- a/arch/arm/configs/omap1_defconfig
+++ b/arch/arm/configs/omap1_defconfig
@@ -48,13 +48,7 @@ CONFIG_MACH_SX1=y
 CONFIG_MACH_NOKIA770=y
 CONFIG_MACH_AMS_DELTA=y
 CONFIG_MACH_OMAP_GENERIC=y
-CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
-CONFIG_OMAP_ARM_216MHZ=y
-CONFIG_OMAP_ARM_195MHZ=y
-CONFIG_OMAP_ARM_192MHZ=y
 CONFIG_OMAP_ARM_182MHZ=y
-CONFIG_OMAP_ARM_168MHZ=y
-# CONFIG_OMAP_ARM_60MHZ is not set
 # CONFIG_ARM_THUMB is not set
 CONFIG_PCCARD=y
 CONFIG_OMAP_CF=y
diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig
index 4a5a126..374000e 100644
--- a/arch/arm/configs/u300_defconfig
+++ b/arch/arm/configs/u300_defconfig
@@ -14,8 +14,6 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_ARCH_U300=y
 CONFIG_MACH_U300=y
 CONFIG_MACH_U300_BS335=y
-CONFIG_MACH_U300_DUAL_RAM=y
-CONFIG_U300_DEBUG=y
 CONFIG_MACH_U300_SPIDUMMY=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -26,19 +24,21 @@ CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/ram0 rw rootfstype=rootfs console=ttyAMA0,115200n8 lpj=515072"
 CONFIG_CPU_IDLE=y
 CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
 # CONFIG_SUSPEND is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_MISC_DEVICES is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_FSMC=y
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
+CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 # CONFIG_HWMON is not set
@@ -51,6 +51,7 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
+CONFIG_MMC_CLKGATE=y
 CONFIG_MMC_ARMMMCI=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
@@ -65,10 +66,8 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_TIMER_STATS=y
 # CONFIG_DEBUG_PREEMPT is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_CRC32 is not set
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index 97d31a4..2d7b6e7 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -10,7 +10,7 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_ARCH_U8500=y
 CONFIG_UX500_SOC_DB5500=y
 CONFIG_UX500_SOC_DB8500=y
-CONFIG_MACH_U8500=y
+CONFIG_MACH_HREFV60=y
 CONFIG_MACH_SNOWBALL=y
 CONFIG_MACH_U5500=y
 CONFIG_NO_HZ=y
@@ -24,6 +24,7 @@ CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_VFP=y
 CONFIG_NEON=y
+CONFIG_PM_RUNTIME=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -41,11 +42,8 @@ CONFIG_MISC_DEVICES=y
 CONFIG_AB8500_PWM=y
 CONFIG_SENSORS_BH1780=y
 CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
 CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+CONFIG_SMSC_PHY=y
 # CONFIG_WLAN is not set
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_EVDEV=y
@@ -72,15 +70,12 @@ CONFIG_SPI=y
 CONFIG_SPI_PL022=y
 CONFIG_GPIO_STMPE=y
 CONFIG_GPIO_TC3589X=y
-# CONFIG_HWMON is not set
 CONFIG_MFD_STMPE=y
 CONFIG_MFD_TC3589X=y
+CONFIG_AB5500_CORE=y
 CONFIG_AB8500_CORE=y
 CONFIG_REGULATOR_AB8500=y
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_MUSB_PIO_ONLY=y
 CONFIG_USB_GADGET=y
 CONFIG_AB8500_USB=y
 CONFIG_MMC=y
@@ -97,6 +92,7 @@ CONFIG_DMADEVICES=y
 CONFIG_STE_DMA40=y
 CONFIG_STAGING=y
 CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=y
+CONFIG_HSEM_U8500=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig
index 59577ad..547a3c1 100644
--- a/arch/arm/configs/zeus_defconfig
+++ b/arch/arm/configs/zeus_defconfig
@@ -140,7 +140,7 @@ CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_GENERIC=y
 CONFIG_USB_SERIAL_MCT_U232=m
 CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
 CONFIG_USB_ETH=m
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 29035e8..b6e65de 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -187,6 +187,17 @@
 #endif
 
 /*
+ * Instruction barrier
+ */
+	.macro	instr_sync
+#if __LINUX_ARM_ARCH__ >= 7
+	isb
+#elif __LINUX_ARM_ARCH__ == 6
+	mcr	p15, 0, r0, c7, c5, 4
+#endif
+	.endm
+
+/*
  * SMP data memory barrier
  */
 	.macro	smp_dmb mode
diff --git a/arch/arm/include/asm/bug.h b/arch/arm/include/asm/bug.h
index 9abe7a0..fac79dc 100644
--- a/arch/arm/include/asm/bug.h
+++ b/arch/arm/include/asm/bug.h
@@ -32,7 +32,6 @@
 
 #define __BUG(__file, __line, __value)				\
 do {								\
-	BUILD_BUG_ON(sizeof(struct bug_entry) != 12);		\
 	asm volatile("1:\t" BUG_INSTR_TYPE #__value "\n"	\
 		".pushsection .rodata.str, \"aMS\", %progbits, 1\n" \
 		"2:\t.asciz " #__file "\n" 			\
diff --git a/arch/arm/include/asm/cti.h b/arch/arm/include/asm/cti.h
new file mode 100644
index 0000000..a0ada3e
--- /dev/null
+++ b/arch/arm/include/asm/cti.h
@@ -0,0 +1,179 @@
+#ifndef __ASMARM_CTI_H
+#define __ASMARM_CTI_H
+
+#include	<asm/io.h>
+
+/* The registers' definition is from section 3.2 of
+ * Embedded Cross Trigger Revision: r0p0
+ */
+#define		CTICONTROL		0x000
+#define		CTISTATUS		0x004
+#define		CTILOCK			0x008
+#define		CTIPROTECTION		0x00C
+#define		CTIINTACK		0x010
+#define		CTIAPPSET		0x014
+#define		CTIAPPCLEAR		0x018
+#define		CTIAPPPULSE		0x01c
+#define		CTIINEN			0x020
+#define		CTIOUTEN		0x0A0
+#define		CTITRIGINSTATUS		0x130
+#define		CTITRIGOUTSTATUS	0x134
+#define		CTICHINSTATUS		0x138
+#define		CTICHOUTSTATUS		0x13c
+#define		CTIPERIPHID0		0xFE0
+#define		CTIPERIPHID1		0xFE4
+#define		CTIPERIPHID2		0xFE8
+#define		CTIPERIPHID3		0xFEC
+#define		CTIPCELLID0		0xFF0
+#define		CTIPCELLID1		0xFF4
+#define		CTIPCELLID2		0xFF8
+#define		CTIPCELLID3		0xFFC
+
+/* The below are from section 3.6.4 of
+ * CoreSight v1.0 Architecture Specification
+ */
+#define		LOCKACCESS		0xFB0
+#define		LOCKSTATUS		0xFB4
+
+/* write this value to LOCKACCESS will unlock the module, and
+ * other value will lock the module
+ */
+#define		LOCKCODE		0xC5ACCE55
+
+/**
+ * struct cti - cross trigger interface struct
+ * @base: mapped virtual address for the cti base
+ * @irq: irq number for the cti
+ * @trig_out_for_irq: triger out number which will cause
+ *	the @irq happen
+ *
+ * cti struct used to operate cti registers.
+ */
+struct cti {
+	void __iomem *base;
+	int irq;
+	int trig_out_for_irq;
+};
+
+/**
+ * cti_init - initialize the cti instance
+ * @cti: cti instance
+ * @base: mapped virtual address for the cti base
+ * @irq: irq number for the cti
+ * @trig_out: triger out number which will cause
+ *	the @irq happen
+ *
+ * called by machine code to pass the board dependent
+ * @base, @irq and @trig_out to cti.
+ */
+static inline void cti_init(struct cti *cti,
+	void __iomem *base, int irq, int trig_out)
+{
+	cti->base = base;
+	cti->irq  = irq;
+	cti->trig_out_for_irq = trig_out;
+}
+
+/**
+ * cti_map_trigger - use the @chan to map @trig_in to @trig_out
+ * @cti: cti instance
+ * @trig_in: trigger in number
+ * @trig_out: trigger out number
+ * @channel: channel number
+ *
+ * This function maps one trigger in of @trig_in to one trigger
+ * out of @trig_out using the channel @chan.
+ */
+static inline void cti_map_trigger(struct cti *cti,
+	int trig_in, int trig_out, int chan)
+{
+	void __iomem *base = cti->base;
+	unsigned long val;
+
+	val = __raw_readl(base + CTIINEN + trig_in * 4);
+	val |= BIT(chan);
+	__raw_writel(val, base + CTIINEN + trig_in * 4);
+
+	val = __raw_readl(base + CTIOUTEN + trig_out * 4);
+	val |= BIT(chan);
+	__raw_writel(val, base + CTIOUTEN + trig_out * 4);
+}
+
+/**
+ * cti_enable - enable the cti module
+ * @cti: cti instance
+ *
+ * enable the cti module
+ */
+static inline void cti_enable(struct cti *cti)
+{
+	__raw_writel(0x1, cti->base + CTICONTROL);
+}
+
+/**
+ * cti_disable - disable the cti module
+ * @cti: cti instance
+ *
+ * enable the cti module
+ */
+static inline void cti_disable(struct cti *cti)
+{
+	__raw_writel(0, cti->base + CTICONTROL);
+}
+
+/**
+ * cti_irq_ack - clear the cti irq
+ * @cti: cti instance
+ *
+ * clear the cti irq
+ */
+static inline void cti_irq_ack(struct cti *cti)
+{
+	void __iomem *base = cti->base;
+	unsigned long val;
+
+	val = __raw_readl(base + CTIINTACK);
+	val |= BIT(cti->trig_out_for_irq);
+	__raw_writel(val, base + CTIINTACK);
+}
+
+/**
+ * cti_unlock - unlock cti module
+ * @cti: cti instance
+ *
+ * unlock the cti module, or else any writes to the cti
+ * module is not allowed.
+ */
+static inline void cti_unlock(struct cti *cti)
+{
+	void __iomem *base = cti->base;
+	unsigned long val;
+
+	val = __raw_readl(base + LOCKSTATUS);
+
+	if (val & 1) {
+		val = LOCKCODE;
+		__raw_writel(val, base + LOCKACCESS);
+	}
+}
+
+/**
+ * cti_lock - lock cti module
+ * @cti: cti instance
+ *
+ * lock the cti module, so any writes to the cti
+ * module will be not allowed.
+ */
+static inline void cti_lock(struct cti *cti)
+{
+	void __iomem *base = cti->base;
+	unsigned long val;
+
+	val = __raw_readl(base + LOCKSTATUS);
+
+	if (!(val & 1)) {
+		val = ~LOCKCODE;
+		__raw_writel(val, base + LOCKACCESS);
+	}
+}
+#endif
diff --git a/arch/arm/include/asm/edac.h b/arch/arm/include/asm/edac.h
new file mode 100644
index 0000000..0df7a2c
--- /dev/null
+++ b/arch/arm/include/asm/edac.h
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2011 Calxeda, Inc.
+ * Based on PPC version Copyright 2007 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef ASM_EDAC_H
+#define ASM_EDAC_H
+/*
+ * ECC atomic, DMA, SMP and interrupt safe scrub function.
+ * Implements the per arch atomic_scrub() that EDAC use for software
+ * ECC scrubbing.  It reads memory and then writes back the original
+ * value, allowing the hardware to detect and correct memory errors.
+ */
+static inline void atomic_scrub(void *va, u32 size)
+{
+#if __LINUX_ARM_ARCH__ >= 6
+	unsigned int *virt_addr = va;
+	unsigned int temp, temp2;
+	unsigned int i;
+
+	for (i = 0; i < size / sizeof(*virt_addr); i++, virt_addr++) {
+		/* Very carefully read and write to memory atomically
+		 * so we are interrupt, DMA and SMP safe.
+		 */
+		__asm__ __volatile__("\n"
+			"1:	ldrex	%0, [%2]\n"
+			"	strex	%1, %0, [%2]\n"
+			"	teq	%1, #0\n"
+			"	bne	1b\n"
+			: "=&r"(temp), "=&r"(temp2)
+			: "r"(virt_addr)
+			: "cc");
+	}
+#endif
+}
+
+#endif
diff --git a/arch/arm/include/asm/entry-macro-vic2.S b/arch/arm/include/asm/entry-macro-vic2.S
deleted file mode 100644
index 3ceb85e..0000000
--- a/arch/arm/include/asm/entry-macro-vic2.S
+++ /dev/null
@@ -1,57 +0,0 @@
-/* arch/arm/include/asm/entry-macro-vic2.S
- *
- * Originally arch/arm/mach-s3c6400/include/mach/entry-macro.S
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Low-level IRQ helper macros for a device with two VICs
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-*/
-
-/* This should be included from <mach/entry-macro.S> with the necessary
- * defines for virtual addresses and IRQ bases for the two vics.
- *
- * The code needs the following defined:
- *	IRQ_VIC0_BASE	IRQ number of VIC0's first IRQ
- *	IRQ_VIC1_BASE	IRQ number of VIC1's first IRQ
- *	VA_VIC0		Virtual address of VIC0
- *	VA_VIC1		Virtual address of VIC1
- *
- * Note, code assumes VIC0's virtual address is an ARM immediate constant
- * away from VIC1.
-*/
-
-#include <asm/hardware/vic.h>
-
-	.macro	disable_fiq
-	.endm
-
-	.macro	get_irqnr_preamble, base, tmp
-	ldr	\base, =VA_VIC0
-	.endm
-
-	.macro	arch_ret_to_user, tmp1, tmp2
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-	@ check the vic0
-	mov	\irqnr, #IRQ_VIC0_BASE + 31
-	ldr	\irqstat, [ \base, # VIC_IRQ_STATUS ]
-	teq	\irqstat, #0
-
-	@ otherwise try vic1
-	addeq	\tmp, \base, #(VA_VIC1 - VA_VIC0)
-	addeq	\irqnr, \irqnr, #(IRQ_VIC1_BASE - IRQ_VIC0_BASE)
-	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
-	teqeq	\irqstat, #0
-
-	clzne	\irqstat, \irqstat
-	subne	\irqnr, \irqnr, \irqstat
-	.endm
diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h
index 11ad0bf..7151753 100644
--- a/arch/arm/include/asm/gpio.h
+++ b/arch/arm/include/asm/gpio.h
@@ -1,6 +1,10 @@
 #ifndef _ARCH_ARM_GPIO_H
 #define _ARCH_ARM_GPIO_H
 
+#if CONFIG_ARCH_NR_GPIO > 0
+#define ARCH_NR_GPIO CONFIG_ARCH_NR_GPIO
+#endif
+
 /* not all ARM platforms necessarily support this API ... */
 #include <mach/gpio.h>
 
diff --git a/arch/arm/include/asm/hardirq.h b/arch/arm/include/asm/hardirq.h
index ddf07a9..436e60b 100644
--- a/arch/arm/include/asm/hardirq.h
+++ b/arch/arm/include/asm/hardirq.h
@@ -27,23 +27,6 @@ u64 smp_irq_stat_cpu(unsigned int cpu);
 
 #define arch_irq_stat_cpu	smp_irq_stat_cpu
 
-#if NR_IRQS > 512
-#define HARDIRQ_BITS	10
-#elif NR_IRQS > 256
-#define HARDIRQ_BITS	9
-#else
-#define HARDIRQ_BITS	8
-#endif
-
-/*
- * The hardirq mask has to be large enough to have space
- * for potentially all IRQ sources in the system nesting
- * on a single CPU:
- */
-#if (1 << HARDIRQ_BITS) < NR_IRQS
-# error HARDIRQ_BITS is too low!
-#endif
-
 #define __ARCH_IRQ_EXIT_IRQS_DISABLED	1
 
 #endif /* __ASM_HARDIRQ_H */
diff --git a/arch/arm/include/asm/hardware/entry-macro-gic.S b/arch/arm/include/asm/hardware/entry-macro-gic.S
deleted file mode 100644
index 74ebc80..0000000
--- a/arch/arm/include/asm/hardware/entry-macro-gic.S
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * arch/arm/include/asm/hardware/entry-macro-gic.S
- *
- * Low-level IRQ helper macros for GIC
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/hardware/gic.h>
-
-#ifndef HAVE_GET_IRQNR_PREAMBLE
-	.macro	get_irqnr_preamble, base, tmp
-	ldr	\base, =gic_cpu_base_addr
-	ldr	\base, [\base]
-	.endm
-#endif
-
-/*
- * The interrupt numbering scheme is defined in the
- * interrupt controller spec.  To wit:
- *
- * Interrupts 0-15 are IPI
- * 16-31 are local.  We allow 30 to be used for the watchdog.
- * 32-1020 are global
- * 1021-1022 are reserved
- * 1023 is "spurious" (no interrupt)
- *
- * A simple read from the controller will tell us the number of the highest
- * priority enabled interrupt.  We then just need to check whether it is in the
- * valid range for an IRQ (30-1020 inclusive).
- */
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-	ldr     \irqstat, [\base, #GIC_CPU_INTACK]
-	/* bits 12-10 = src CPU, 9-0 = int # */
-
-	ldr	\tmp, =1021
-	bic     \irqnr, \irqstat, #0x1c00
-	cmp     \irqnr, #15
-	cmpcc	\irqnr, \irqnr
-	cmpne	\irqnr, \tmp
-	cmpcs	\irqnr, \irqnr
-	.endm
-
-/* We assume that irqstat (the raw value of the IRQ acknowledge
- * register) is preserved from the macro above.
- * If there is an IPI, we immediately signal end of interrupt on the
- * controller, since this requires the original irqstat value which
- * we won't easily be able to recreate later.
- */
-
-	.macro test_for_ipi, irqnr, irqstat, base, tmp
-	bic	\irqnr, \irqstat, #0x1c00
-	cmp	\irqnr, #16
-	strcc	\irqstat, [\base, #GIC_CPU_EOI]
-	cmpcs	\irqnr, \irqnr
-	.endm
diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h
index 3e91f22..4bdfe00 100644
--- a/arch/arm/include/asm/hardware/gic.h
+++ b/arch/arm/include/asm/hardware/gic.h
@@ -36,30 +36,22 @@
 #include <linux/irqdomain.h>
 struct device_node;
 
-extern void __iomem *gic_cpu_base_addr;
 extern struct irq_chip gic_arch_extn;
 
-void gic_init(unsigned int, int, void __iomem *, void __iomem *);
+void gic_init_bases(unsigned int, int, void __iomem *, void __iomem *,
+		    u32 offset);
 int gic_of_init(struct device_node *node, struct device_node *parent);
 void gic_secondary_init(unsigned int);
+void gic_handle_irq(struct pt_regs *regs);
 void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
 void gic_raise_softirq(const struct cpumask *mask, unsigned int irq);
 
-struct gic_chip_data {
-	void __iomem *dist_base;
-	void __iomem *cpu_base;
-#ifdef CONFIG_CPU_PM
-	u32 saved_spi_enable[DIV_ROUND_UP(1020, 32)];
-	u32 saved_spi_conf[DIV_ROUND_UP(1020, 16)];
-	u32 saved_spi_target[DIV_ROUND_UP(1020, 4)];
-	u32 __percpu *saved_ppi_enable;
-	u32 __percpu *saved_ppi_conf;
-#endif
-#ifdef CONFIG_IRQ_DOMAIN
-	struct irq_domain domain;
-#endif
-	unsigned int gic_irqs;
-};
+static inline void gic_init(unsigned int nr, int start,
+			    void __iomem *dist , void __iomem *cpu)
+{
+	gic_init_bases(nr, start, dist, cpu, 0);
+}
+
 #endif
 
 #endif
diff --git a/arch/arm/include/asm/hardware/iop3xx.h b/arch/arm/include/asm/hardware/iop3xx.h
index 5daea29..077c323 100644
--- a/arch/arm/include/asm/hardware/iop3xx.h
+++ b/arch/arm/include/asm/hardware/iop3xx.h
@@ -234,6 +234,7 @@ extern int iop3xx_get_init_atu(void);
 void iop3xx_map_io(void);
 void iop_init_cp6_handler(void);
 void iop_init_time(unsigned long tickrate);
+void iop3xx_restart(char, const char *);
 
 static inline u32 read_tmr0(void)
 {
diff --git a/arch/arm/include/asm/hardware/vic.h b/arch/arm/include/asm/hardware/vic.h
index 5d72550..f42ebd6 100644
--- a/arch/arm/include/asm/hardware/vic.h
+++ b/arch/arm/include/asm/hardware/vic.h
@@ -41,7 +41,15 @@
 #define VIC_PL192_VECT_ADDR		0xF00
 
 #ifndef __ASSEMBLY__
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+struct device_node;
+struct pt_regs;
+
 void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, u32 resume_sources);
-#endif
+int vic_of_init(struct device_node *node, struct device_node *parent);
+void vic_handle_irq(struct pt_regs *regs);
 
+#endif /* __ASSEMBLY__ */
 #endif
diff --git a/arch/arm/include/asm/idmap.h b/arch/arm/include/asm/idmap.h
new file mode 100644
index 0000000..bf863ed
--- /dev/null
+++ b/arch/arm/include/asm/idmap.h
@@ -0,0 +1,14 @@
+#ifndef __ASM_IDMAP_H
+#define __ASM_IDMAP_H
+
+#include <linux/compiler.h>
+#include <asm/pgtable.h>
+
+/* Tag a function as requiring to be executed via an identity mapping. */
+#define __idmap __section(.idmap.text) noinline notrace
+
+extern pgd_t *idmap_pgd;
+
+void setup_mm_for_reboot(void);
+
+#endif	/* __ASM_IDMAP_H */
diff --git a/arch/arm/include/asm/ipcbuf.h b/arch/arm/include/asm/ipcbuf.h
index 9768397..84c7e51 100644
--- a/arch/arm/include/asm/ipcbuf.h
+++ b/arch/arm/include/asm/ipcbuf.h
@@ -1,29 +1 @@
-#ifndef __ASMARM_IPCBUF_H
-#define __ASMARM_IPCBUF_H
-
-/*
- * The ipc64_perm structure for arm architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit mode_t and seq
- * - 2 miscellaneous 32-bit values
- */
-
-struct ipc64_perm
-{
-	__kernel_key_t		key;
-	__kernel_uid32_t	uid;
-	__kernel_gid32_t	gid;
-	__kernel_uid32_t	cuid;
-	__kernel_gid32_t	cgid;
-	__kernel_mode_t		mode;
-	unsigned short		__pad1;
-	unsigned short		seq;
-	unsigned short		__pad2;
-	unsigned long		__unused1;
-	unsigned long		__unused2;
-};
-
-#endif /* __ASMARM_IPCBUF_H */
+#include <asm-generic/ipcbuf.h>
diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index 2b0efc3..d7692ca 100644
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -19,7 +19,7 @@ struct machine_desc {
 	unsigned int		nr;		/* architecture number	*/
 	const char		*name;		/* architecture name	*/
 	unsigned long		atag_offset;	/* tagged list (relative) */
-	const char		**dt_compat;	/* array of device tree
+	const char *const 	*dt_compat;	/* array of device tree
 						 * 'compatible' strings	*/
 
 	unsigned int		nr_irqs;	/* number of IRQs */
@@ -31,10 +31,10 @@ struct machine_desc {
 	unsigned int		video_start;	/* start of video RAM	*/
 	unsigned int		video_end;	/* end of video RAM	*/
 
-	unsigned int		reserve_lp0 :1;	/* never has lp0	*/
-	unsigned int		reserve_lp1 :1;	/* never has lp1	*/
-	unsigned int		reserve_lp2 :1;	/* never has lp2	*/
-	unsigned int		soft_reboot :1;	/* soft reboot		*/
+	unsigned char		reserve_lp0 :1;	/* never has lp0	*/
+	unsigned char		reserve_lp1 :1;	/* never has lp1	*/
+	unsigned char		reserve_lp2 :1;	/* never has lp2	*/
+	char			restart_mode;	/* default restart mode	*/
 	void			(*fixup)(struct tag *, char **,
 					 struct meminfo *);
 	void			(*reserve)(void);/* reserve mem blocks	*/
@@ -46,6 +46,7 @@ struct machine_desc {
 #ifdef CONFIG_MULTI_IRQ_HANDLER
 	void			(*handle_irq)(struct pt_regs *);
 #endif
+	void			(*restart)(char, const char *);
 };
 
 /*
diff --git a/arch/arm/include/asm/mach/time.h b/arch/arm/include/asm/mach/time.h
index d5adaae..f73c908 100644
--- a/arch/arm/include/asm/mach/time.h
+++ b/arch/arm/include/asm/mach/time.h
@@ -10,8 +10,6 @@
 #ifndef __ASM_ARM_MACH_TIME_H
 #define __ASM_ARM_MACH_TIME_H
 
-#include <linux/sysdev.h>
-
 /*
  * This is our kernel timer structure.
  *
diff --git a/arch/arm/include/asm/opcodes.h b/arch/arm/include/asm/opcodes.h
new file mode 100644
index 0000000..c0efdd6
--- /dev/null
+++ b/arch/arm/include/asm/opcodes.h
@@ -0,0 +1,20 @@
+/*
+ *  arch/arm/include/asm/opcodes.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARM_OPCODES_H
+#define __ASM_ARM_OPCODES_H
+
+#ifndef __ASSEMBLY__
+extern asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr);
+#endif
+
+#define ARM_OPCODE_CONDTEST_FAIL   0
+#define ARM_OPCODE_CONDTEST_PASS   1
+#define ARM_OPCODE_CONDTEST_UNCOND 2
+
+#endif /* __ASM_ARM_OPCODES_H */
diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h
index ca94653..97b440c 100644
--- a/arch/arm/include/asm/page.h
+++ b/arch/arm/include/asm/page.h
@@ -151,7 +151,11 @@ extern void __cpu_copy_user_highpage(struct page *to, struct page *from,
 #define clear_page(page)	memset((void *)(page), 0, PAGE_SIZE)
 extern void copy_page(void *to, const void *from);
 
+#ifdef CONFIG_ARM_LPAE
+#include <asm/pgtable-3level-types.h>
+#else
 #include <asm/pgtable-2level-types.h>
+#endif
 
 #endif /* CONFIG_MMU */
 
diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h
index 0f8e382..99cfe36 100644
--- a/arch/arm/include/asm/perf_event.h
+++ b/arch/arm/include/asm/perf_event.h
@@ -32,7 +32,4 @@ enum arm_perf_pmu_ids {
 extern enum arm_perf_pmu_ids
 armpmu_get_pmu_id(void);
 
-extern int
-armpmu_get_max_events(void);
-
 #endif /* __ARM_PERF_EVENT_H__ */
diff --git a/arch/arm/include/asm/pgalloc.h b/arch/arm/include/asm/pgalloc.h
index 3e08fd3..943504f 100644
--- a/arch/arm/include/asm/pgalloc.h
+++ b/arch/arm/include/asm/pgalloc.h
@@ -25,12 +25,34 @@
 #define _PAGE_USER_TABLE	(PMD_TYPE_TABLE | PMD_BIT4 | PMD_DOMAIN(DOMAIN_USER))
 #define _PAGE_KERNEL_TABLE	(PMD_TYPE_TABLE | PMD_BIT4 | PMD_DOMAIN(DOMAIN_KERNEL))
 
+#ifdef CONFIG_ARM_LPAE
+
+static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr)
+{
+	return (pmd_t *)get_zeroed_page(GFP_KERNEL | __GFP_REPEAT);
+}
+
+static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
+{
+	BUG_ON((unsigned long)pmd & (PAGE_SIZE-1));
+	free_page((unsigned long)pmd);
+}
+
+static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
+{
+	set_pud(pud, __pud(__pa(pmd) | PMD_TYPE_TABLE));
+}
+
+#else	/* !CONFIG_ARM_LPAE */
+
 /*
  * Since we have only two-level page tables, these are trivial
  */
 #define pmd_alloc_one(mm,addr)		({ BUG(); ((pmd_t *)2); })
 #define pmd_free(mm, pmd)		do { } while (0)
-#define pgd_populate(mm,pmd,pte)	BUG()
+#define pud_populate(mm,pmd,pte)	BUG()
+
+#endif	/* CONFIG_ARM_LPAE */
 
 extern pgd_t *pgd_alloc(struct mm_struct *mm);
 extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
@@ -109,7 +131,9 @@ static inline void __pmd_populate(pmd_t *pmdp, phys_addr_t pte,
 {
 	pmdval_t pmdval = (pte + PTE_HWTABLE_OFF) | prot;
 	pmdp[0] = __pmd(pmdval);
+#ifndef CONFIG_ARM_LPAE
 	pmdp[1] = __pmd(pmdval + 256 * sizeof(pte_t));
+#endif
 	flush_pmd_entry(pmdp);
 }
 
diff --git a/arch/arm/include/asm/pgtable-2level.h b/arch/arm/include/asm/pgtable-2level.h
index 470457e..2317a71 100644
--- a/arch/arm/include/asm/pgtable-2level.h
+++ b/arch/arm/include/asm/pgtable-2level.h
@@ -140,4 +140,45 @@
 #define L_PTE_MT_DEV_CACHED	(_AT(pteval_t, 0x0b) << 2)	/* 1011 */
 #define L_PTE_MT_MASK		(_AT(pteval_t, 0x0f) << 2)
 
+#ifndef __ASSEMBLY__
+
+/*
+ * The "pud_xxx()" functions here are trivial when the pmd is folded into
+ * the pud: the pud entry is never bad, always exists, and can't be set or
+ * cleared.
+ */
+#define pud_none(pud)		(0)
+#define pud_bad(pud)		(0)
+#define pud_present(pud)	(1)
+#define pud_clear(pudp)		do { } while (0)
+#define set_pud(pud,pudp)	do { } while (0)
+
+static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr)
+{
+	return (pmd_t *)pud;
+}
+
+#define pmd_bad(pmd)		(pmd_val(pmd) & 2)
+
+#define copy_pmd(pmdpd,pmdps)		\
+	do {				\
+		pmdpd[0] = pmdps[0];	\
+		pmdpd[1] = pmdps[1];	\
+		flush_pmd_entry(pmdpd);	\
+	} while (0)
+
+#define pmd_clear(pmdp)			\
+	do {				\
+		pmdp[0] = __pmd(0);	\
+		pmdp[1] = __pmd(0);	\
+		clean_pmd_entry(pmdp);	\
+	} while (0)
+
+/* we don't need complex calculations here as the pmd is folded into the pgd */
+#define pmd_addr_end(addr,end) (end)
+
+#define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext)
+
+#endif /* __ASSEMBLY__ */
+
 #endif /* _ASM_PGTABLE_2LEVEL_H */
diff --git a/arch/arm/include/asm/pgtable-3level-hwdef.h b/arch/arm/include/asm/pgtable-3level-hwdef.h
new file mode 100644
index 0000000..d795282
--- /dev/null
+++ b/arch/arm/include/asm/pgtable-3level-hwdef.h
@@ -0,0 +1,77 @@
+/*
+ * arch/arm/include/asm/pgtable-3level-hwdef.h
+ *
+ * Copyright (C) 2011 ARM Ltd.
+ * Author: Catalin Marinas <catalin.marinas@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _ASM_PGTABLE_3LEVEL_HWDEF_H
+#define _ASM_PGTABLE_3LEVEL_HWDEF_H
+
+/*
+ * Hardware page table definitions.
+ *
+ * + Level 1/2 descriptor
+ *   - common
+ */
+#define PMD_TYPE_MASK		(_AT(pmdval_t, 3) << 0)
+#define PMD_TYPE_FAULT		(_AT(pmdval_t, 0) << 0)
+#define PMD_TYPE_TABLE		(_AT(pmdval_t, 3) << 0)
+#define PMD_TYPE_SECT		(_AT(pmdval_t, 1) << 0)
+#define PMD_BIT4		(_AT(pmdval_t, 0))
+#define PMD_DOMAIN(x)		(_AT(pmdval_t, 0))
+
+/*
+ *   - section
+ */
+#define PMD_SECT_BUFFERABLE	(_AT(pmdval_t, 1) << 2)
+#define PMD_SECT_CACHEABLE	(_AT(pmdval_t, 1) << 3)
+#define PMD_SECT_S		(_AT(pmdval_t, 3) << 8)
+#define PMD_SECT_AF		(_AT(pmdval_t, 1) << 10)
+#define PMD_SECT_nG		(_AT(pmdval_t, 1) << 11)
+#define PMD_SECT_XN		(_AT(pmdval_t, 1) << 54)
+#define PMD_SECT_AP_WRITE	(_AT(pmdval_t, 0))
+#define PMD_SECT_AP_READ	(_AT(pmdval_t, 0))
+#define PMD_SECT_TEX(x)		(_AT(pmdval_t, 0))
+
+/*
+ * AttrIndx[2:0] encoding (mapping attributes defined in the MAIR* registers).
+ */
+#define PMD_SECT_UNCACHED	(_AT(pmdval_t, 0) << 2)	/* strongly ordered */
+#define PMD_SECT_BUFFERED	(_AT(pmdval_t, 1) << 2)	/* normal non-cacheable */
+#define PMD_SECT_WT		(_AT(pmdval_t, 2) << 2)	/* normal inner write-through */
+#define PMD_SECT_WB		(_AT(pmdval_t, 3) << 2)	/* normal inner write-back */
+#define PMD_SECT_WBWA		(_AT(pmdval_t, 7) << 2)	/* normal inner write-alloc */
+
+/*
+ * + Level 3 descriptor (PTE)
+ */
+#define PTE_TYPE_MASK		(_AT(pteval_t, 3) << 0)
+#define PTE_TYPE_FAULT		(_AT(pteval_t, 0) << 0)
+#define PTE_TYPE_PAGE		(_AT(pteval_t, 3) << 0)
+#define PTE_BUFFERABLE		(_AT(pteval_t, 1) << 2)		/* AttrIndx[0] */
+#define PTE_CACHEABLE		(_AT(pteval_t, 1) << 3)		/* AttrIndx[1] */
+#define PTE_EXT_SHARED		(_AT(pteval_t, 3) << 8)		/* SH[1:0], inner shareable */
+#define PTE_EXT_AF		(_AT(pteval_t, 1) << 10)	/* Access Flag */
+#define PTE_EXT_NG		(_AT(pteval_t, 1) << 11)	/* nG */
+#define PTE_EXT_XN		(_AT(pteval_t, 1) << 54)	/* XN */
+
+/*
+ * 40-bit physical address supported.
+ */
+#define PHYS_MASK_SHIFT		(40)
+#define PHYS_MASK		((1ULL << PHYS_MASK_SHIFT) - 1)
+
+#endif
diff --git a/arch/arm/include/asm/pgtable-3level-types.h b/arch/arm/include/asm/pgtable-3level-types.h
new file mode 100644
index 0000000..921aa30
--- /dev/null
+++ b/arch/arm/include/asm/pgtable-3level-types.h
@@ -0,0 +1,70 @@
+/*
+ * arch/arm/include/asm/pgtable-3level-types.h
+ *
+ * Copyright (C) 2011 ARM Ltd.
+ * Author: Catalin Marinas <catalin.marinas@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _ASM_PGTABLE_3LEVEL_TYPES_H
+#define _ASM_PGTABLE_3LEVEL_TYPES_H
+
+#include <asm/types.h>
+
+typedef u64 pteval_t;
+typedef u64 pmdval_t;
+typedef u64 pgdval_t;
+
+#undef STRICT_MM_TYPECHECKS
+
+#ifdef STRICT_MM_TYPECHECKS
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { pteval_t pte; } pte_t;
+typedef struct { pmdval_t pmd; } pmd_t;
+typedef struct { pgdval_t pgd; } pgd_t;
+typedef struct { pteval_t pgprot; } pgprot_t;
+
+#define pte_val(x)      ((x).pte)
+#define pmd_val(x)      ((x).pmd)
+#define pgd_val(x)	((x).pgd)
+#define pgprot_val(x)   ((x).pgprot)
+
+#define __pte(x)        ((pte_t) { (x) } )
+#define __pmd(x)        ((pmd_t) { (x) } )
+#define __pgd(x)	((pgd_t) { (x) } )
+#define __pgprot(x)     ((pgprot_t) { (x) } )
+
+#else	/* !STRICT_MM_TYPECHECKS */
+
+typedef pteval_t pte_t;
+typedef pmdval_t pmd_t;
+typedef pgdval_t pgd_t;
+typedef pteval_t pgprot_t;
+
+#define pte_val(x)	(x)
+#define pmd_val(x)	(x)
+#define pgd_val(x)	(x)
+#define pgprot_val(x)	(x)
+
+#define __pte(x)	(x)
+#define __pmd(x)	(x)
+#define __pgd(x)	(x)
+#define __pgprot(x)	(x)
+
+#endif	/* STRICT_MM_TYPECHECKS */
+
+#endif	/* _ASM_PGTABLE_3LEVEL_TYPES_H */
diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h
new file mode 100644
index 0000000..759af70
--- /dev/null
+++ b/arch/arm/include/asm/pgtable-3level.h
@@ -0,0 +1,155 @@
+/*
+ * arch/arm/include/asm/pgtable-3level.h
+ *
+ * Copyright (C) 2011 ARM Ltd.
+ * Author: Catalin Marinas <catalin.marinas@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _ASM_PGTABLE_3LEVEL_H
+#define _ASM_PGTABLE_3LEVEL_H
+
+/*
+ * With LPAE, there are 3 levels of page tables. Each level has 512 entries of
+ * 8 bytes each, occupying a 4K page. The first level table covers a range of
+ * 512GB, each entry representing 1GB. Since we are limited to 4GB input
+ * address range, only 4 entries in the PGD are used.
+ *
+ * There are enough spare bits in a page table entry for the kernel specific
+ * state.
+ */
+#define PTRS_PER_PTE		512
+#define PTRS_PER_PMD		512
+#define PTRS_PER_PGD		4
+
+#define PTE_HWTABLE_PTRS	(PTRS_PER_PTE)
+#define PTE_HWTABLE_OFF		(0)
+#define PTE_HWTABLE_SIZE	(PTRS_PER_PTE * sizeof(u64))
+
+/*
+ * PGDIR_SHIFT determines the size a top-level page table entry can map.
+ */
+#define PGDIR_SHIFT		30
+
+/*
+ * PMD_SHIFT determines the size a middle-level page table entry can map.
+ */
+#define PMD_SHIFT		21
+
+#define PMD_SIZE		(1UL << PMD_SHIFT)
+#define PMD_MASK		(~(PMD_SIZE-1))
+#define PGDIR_SIZE		(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK		(~(PGDIR_SIZE-1))
+
+/*
+ * section address mask and size definitions.
+ */
+#define SECTION_SHIFT		21
+#define SECTION_SIZE		(1UL << SECTION_SHIFT)
+#define SECTION_MASK		(~(SECTION_SIZE-1))
+
+#define USER_PTRS_PER_PGD	(PAGE_OFFSET / PGDIR_SIZE)
+
+/*
+ * "Linux" PTE definitions for LPAE.
+ *
+ * These bits overlap with the hardware bits but the naming is preserved for
+ * consistency with the classic page table format.
+ */
+#define L_PTE_PRESENT		(_AT(pteval_t, 3) << 0)		/* Valid */
+#define L_PTE_FILE		(_AT(pteval_t, 1) << 2)		/* only when !PRESENT */
+#define L_PTE_BUFFERABLE	(_AT(pteval_t, 1) << 2)		/* AttrIndx[0] */
+#define L_PTE_CACHEABLE		(_AT(pteval_t, 1) << 3)		/* AttrIndx[1] */
+#define L_PTE_USER		(_AT(pteval_t, 1) << 6)		/* AP[1] */
+#define L_PTE_RDONLY		(_AT(pteval_t, 1) << 7)		/* AP[2] */
+#define L_PTE_SHARED		(_AT(pteval_t, 3) << 8)		/* SH[1:0], inner shareable */
+#define L_PTE_YOUNG		(_AT(pteval_t, 1) << 10)	/* AF */
+#define L_PTE_XN		(_AT(pteval_t, 1) << 54)	/* XN */
+#define L_PTE_DIRTY		(_AT(pteval_t, 1) << 55)	/* unused */
+#define L_PTE_SPECIAL		(_AT(pteval_t, 1) << 56)	/* unused */
+
+/*
+ * To be used in assembly code with the upper page attributes.
+ */
+#define L_PTE_XN_HIGH		(1 << (54 - 32))
+#define L_PTE_DIRTY_HIGH	(1 << (55 - 32))
+
+/*
+ * AttrIndx[2:0] encoding (mapping attributes defined in the MAIR* registers).
+ */
+#define L_PTE_MT_UNCACHED	(_AT(pteval_t, 0) << 2)	/* strongly ordered */
+#define L_PTE_MT_BUFFERABLE	(_AT(pteval_t, 1) << 2)	/* normal non-cacheable */
+#define L_PTE_MT_WRITETHROUGH	(_AT(pteval_t, 2) << 2)	/* normal inner write-through */
+#define L_PTE_MT_WRITEBACK	(_AT(pteval_t, 3) << 2)	/* normal inner write-back */
+#define L_PTE_MT_WRITEALLOC	(_AT(pteval_t, 7) << 2)	/* normal inner write-alloc */
+#define L_PTE_MT_DEV_SHARED	(_AT(pteval_t, 4) << 2)	/* device */
+#define L_PTE_MT_DEV_NONSHARED	(_AT(pteval_t, 4) << 2)	/* device */
+#define L_PTE_MT_DEV_WC		(_AT(pteval_t, 1) << 2)	/* normal non-cacheable */
+#define L_PTE_MT_DEV_CACHED	(_AT(pteval_t, 3) << 2)	/* normal inner write-back */
+#define L_PTE_MT_MASK		(_AT(pteval_t, 7) << 2)
+
+/*
+ * Software PGD flags.
+ */
+#define L_PGD_SWAPPER		(_AT(pgdval_t, 1) << 55)	/* swapper_pg_dir entry */
+
+#ifndef __ASSEMBLY__
+
+#define pud_none(pud)		(!pud_val(pud))
+#define pud_bad(pud)		(!(pud_val(pud) & 2))
+#define pud_present(pud)	(pud_val(pud))
+
+#define pud_clear(pudp)			\
+	do {				\
+		*pudp = __pud(0);	\
+		clean_pmd_entry(pudp);	\
+	} while (0)
+
+#define set_pud(pudp, pud)		\
+	do {				\
+		*pudp = pud;		\
+		flush_pmd_entry(pudp);	\
+	} while (0)
+
+static inline pmd_t *pud_page_vaddr(pud_t pud)
+{
+	return __va(pud_val(pud) & PHYS_MASK & (s32)PAGE_MASK);
+}
+
+/* Find an entry in the second-level page table.. */
+#define pmd_index(addr)		(((addr) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))
+static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr)
+{
+	return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(addr);
+}
+
+#define pmd_bad(pmd)		(!(pmd_val(pmd) & 2))
+
+#define copy_pmd(pmdpd,pmdps)		\
+	do {				\
+		*pmdpd = *pmdps;	\
+		flush_pmd_entry(pmdpd);	\
+	} while (0)
+
+#define pmd_clear(pmdp)			\
+	do {				\
+		*pmdp = __pmd(0);	\
+		clean_pmd_entry(pmdp);	\
+	} while (0)
+
+#define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,__pte(pte_val(pte)|(ext)))
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_PGTABLE_3LEVEL_H */
diff --git a/arch/arm/include/asm/pgtable-hwdef.h b/arch/arm/include/asm/pgtable-hwdef.h
index 1831111..8426229 100644
--- a/arch/arm/include/asm/pgtable-hwdef.h
+++ b/arch/arm/include/asm/pgtable-hwdef.h
@@ -10,6 +10,10 @@
 #ifndef _ASMARM_PGTABLE_HWDEF_H
 #define _ASMARM_PGTABLE_HWDEF_H
 
+#ifdef CONFIG_ARM_LPAE
+#include <asm/pgtable-3level-hwdef.h>
+#else
 #include <asm/pgtable-2level-hwdef.h>
+#endif
 
 #endif
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 9451dce..f66626d 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -11,20 +11,24 @@
 #define _ASMARM_PGTABLE_H
 
 #include <linux/const.h>
-#include <asm-generic/4level-fixup.h>
 #include <asm/proc-fns.h>
 
 #ifndef CONFIG_MMU
 
+#include <asm-generic/4level-fixup.h>
 #include "pgtable-nommu.h"
 
 #else
 
+#include <asm-generic/pgtable-nopud.h>
 #include <asm/memory.h>
-#include <mach/vmalloc.h>
 #include <asm/pgtable-hwdef.h>
 
+#ifdef CONFIG_ARM_LPAE
+#include <asm/pgtable-3level.h>
+#else
 #include <asm/pgtable-2level.h>
+#endif
 
 /*
  * Just any arbitrary offset to the start of the vmalloc VM area: the
@@ -33,15 +37,10 @@
  * any out-of-bounds memory accesses will hopefully be caught.
  * The vmalloc() routines leaves a hole of 4kB between each vmalloced
  * area for the same reason. ;)
- *
- * Note that platforms may override VMALLOC_START, but they must provide
- * VMALLOC_END.  VMALLOC_END defines the (exclusive) limit of this space,
- * which may not overlap IO space.
  */
-#ifndef VMALLOC_START
 #define VMALLOC_OFFSET		(8*1024*1024)
 #define VMALLOC_START		(((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
-#endif
+#define VMALLOC_END		0xff000000UL
 
 #define LIBRARY_TEXT_START	0x0c000000
 
@@ -163,39 +162,8 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
 /* to find an entry in a kernel page-table-directory */
 #define pgd_offset_k(addr)	pgd_offset(&init_mm, addr)
 
-/*
- * The "pgd_xxx()" functions here are trivial for a folded two-level
- * setup: the pgd is never bad, and a pmd always exists (as it's folded
- * into the pgd entry)
- */
-#define pgd_none(pgd)		(0)
-#define pgd_bad(pgd)		(0)
-#define pgd_present(pgd)	(1)
-#define pgd_clear(pgdp)		do { } while (0)
-#define set_pgd(pgd,pgdp)	do { } while (0)
-#define set_pud(pud,pudp)	do { } while (0)
-
-
-/* Find an entry in the second-level page table.. */
-#define pmd_offset(dir, addr)	((pmd_t *)(dir))
-
 #define pmd_none(pmd)		(!pmd_val(pmd))
 #define pmd_present(pmd)	(pmd_val(pmd))
-#define pmd_bad(pmd)		(pmd_val(pmd) & 2)
-
-#define copy_pmd(pmdpd,pmdps)		\
-	do {				\
-		pmdpd[0] = pmdps[0];	\
-		pmdpd[1] = pmdps[1];	\
-		flush_pmd_entry(pmdpd);	\
-	} while (0)
-
-#define pmd_clear(pmdp)			\
-	do {				\
-		pmdp[0] = __pmd(0);	\
-		pmdp[1] = __pmd(0);	\
-		clean_pmd_entry(pmdp);	\
-	} while (0)
 
 static inline pte_t *pmd_page_vaddr(pmd_t pmd)
 {
@@ -204,10 +172,6 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd)
 
 #define pmd_page(pmd)		pfn_to_page(__phys_to_pfn(pmd_val(pmd) & PHYS_MASK))
 
-/* we don't need complex calculations here as the pmd is folded into the pgd */
-#define pmd_addr_end(addr,end)	(end)
-
-
 #ifndef CONFIG_HIGHPTE
 #define __pte_map(pmd)		pmd_page_vaddr(*(pmd))
 #define __pte_unmap(pte)	do { } while (0)
@@ -229,7 +193,6 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd)
 #define pte_page(pte)		pfn_to_page(pte_pfn(pte))
 #define mk_pte(page,prot)	pfn_pte(page_to_pfn(page), prot)
 
-#define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext)
 #define pte_clear(mm,addr,ptep)	set_pte_ext(ptep, __pte(0), 0)
 
 #if __LINUX_ARM_ARCH__ < 6
@@ -336,6 +299,7 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
  * We provide our own arch_get_unmapped_area to cope with VIPT caches.
  */
 #define HAVE_ARCH_UNMAPPED_AREA
+#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
 
 /*
  * remap a physical page `pfn' of size `size' with page protection `prot'
@@ -346,9 +310,6 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 
 #define pgtable_cache_init() do { } while (0)
 
-void identity_mapping_add(pgd_t *, unsigned long, unsigned long);
-void identity_mapping_del(pgd_t *, unsigned long, unsigned long);
-
 #endif /* !__ASSEMBLY__ */
 
 #endif /* CONFIG_MMU */
diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h
index 71d99b8..b5a5be2 100644
--- a/arch/arm/include/asm/pmu.h
+++ b/arch/arm/include/asm/pmu.h
@@ -27,13 +27,22 @@ enum arm_pmu_type {
 /*
  * struct arm_pmu_platdata - ARM PMU platform data
  *
- * @handle_irq: an optional handler which will be called from the interrupt and
- * passed the address of the low level handler, and can be used to implement
- * any platform specific handling before or after calling it.
+ * @handle_irq: an optional handler which will be called from the
+ *	interrupt and passed the address of the low level handler,
+ *	and can be used to implement any platform specific handling
+ *	before or after calling it.
+ * @enable_irq: an optional handler which will be called after
+ *	request_irq and be used to handle some platform specific
+ *	irq enablement
+ * @disable_irq: an optional handler which will be called before
+ *	free_irq and be used to handle some platform specific
+ *	irq disablement
  */
 struct arm_pmu_platdata {
 	irqreturn_t (*handle_irq)(int irq, void *dev,
 				  irq_handler_t pmu_handler);
+	void (*enable_irq)(int irq);
+	void (*disable_irq)(int irq);
 };
 
 #ifdef CONFIG_CPU_HAS_PMU
@@ -55,16 +64,6 @@ reserve_pmu(enum arm_pmu_type type);
 extern void
 release_pmu(enum arm_pmu_type type);
 
-/**
- * init_pmu() - Initialise the PMU.
- *
- * Initialise the system ready for PMU enabling. This should typically set the
- * IRQ affinity and nothing else. The users (oprofile/perf events etc) will do
- * the actual hardware initialisation.
- */
-extern int
-init_pmu(enum arm_pmu_type type);
-
 #else /* CONFIG_CPU_HAS_PMU */
 
 #include <linux/err.h>
diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h
index 9e92cb20..f3628fb 100644
--- a/arch/arm/include/asm/proc-fns.h
+++ b/arch/arm/include/asm/proc-fns.h
@@ -65,7 +65,11 @@ extern struct processor {
 	 * Set a possibly extended PTE.  Non-extended PTEs should
 	 * ignore 'ext'.
 	 */
+#ifdef CONFIG_ARM_LPAE
+	void (*set_pte_ext)(pte_t *ptep, pte_t pte);
+#else
 	void (*set_pte_ext)(pte_t *ptep, pte_t pte, unsigned int ext);
+#endif
 
 	/* Suspend/resume */
 	unsigned int suspend_size;
@@ -79,7 +83,11 @@ extern void cpu_proc_fin(void);
 extern int cpu_do_idle(void);
 extern void cpu_dcache_clean_area(void *, int);
 extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm);
+#ifdef CONFIG_ARM_LPAE
+extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte);
+#else
 extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
+#endif
 extern void cpu_reset(unsigned long addr) __attribute__((noreturn));
 
 /* These three are private to arch/arm/kernel/suspend.c */
@@ -107,6 +115,18 @@ extern void cpu_resume(void);
 
 #define cpu_switch_mm(pgd,mm) cpu_do_switch_mm(virt_to_phys(pgd),mm)
 
+#ifdef CONFIG_ARM_LPAE
+#define cpu_get_pgd()	\
+	({						\
+		unsigned long pg, pg2;			\
+		__asm__("mrrc	p15, 0, %0, %1, c2"	\
+			: "=r" (pg), "=r" (pg2)		\
+			:				\
+			: "cc");			\
+		pg &= ~(PTRS_PER_PGD*sizeof(pgd_t)-1);	\
+		(pgd_t *)phys_to_virt(pg);		\
+	})
+#else
 #define cpu_get_pgd()	\
 	({						\
 		unsigned long pg;			\
@@ -115,6 +135,7 @@ extern void cpu_resume(void);
 		pg &= ~0x3fff;				\
 		(pgd_t *)phys_to_virt(pg);		\
 	})
+#endif
 
 #endif
 
diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h
index b2d9df5..ce280b8 100644
--- a/arch/arm/include/asm/processor.h
+++ b/arch/arm/include/asm/processor.h
@@ -123,6 +123,8 @@ static inline void prefetch(const void *ptr)
 
 #endif
 
+#define HAVE_ARCH_PICK_MMAP_LAYOUT
+
 #endif
 
 #endif /* __ASM_ARM_PROCESSOR_H */
diff --git a/arch/arm/include/asm/prom.h b/arch/arm/include/asm/prom.h
index 6f65ca8..ee03633 100644
--- a/arch/arm/include/asm/prom.h
+++ b/arch/arm/include/asm/prom.h
@@ -13,7 +13,6 @@
 
 #ifdef CONFIG_OF
 
-#include <asm/setup.h>
 #include <asm/irq.h>
 
 extern struct machine_desc *setup_machine_fdt(unsigned int dt_phys);
diff --git a/arch/arm/include/asm/sched_clock.h b/arch/arm/include/asm/sched_clock.h
index c8e6ddf..e3f7572 100644
--- a/arch/arm/include/asm/sched_clock.h
+++ b/arch/arm/include/asm/sched_clock.h
@@ -8,113 +8,7 @@
 #ifndef ASM_SCHED_CLOCK
 #define ASM_SCHED_CLOCK
 
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-struct clock_data {
-	u64 epoch_ns;
-	u32 epoch_cyc;
-	u32 epoch_cyc_copy;
-	u32 mult;
-	u32 shift;
-};
-
-#define DEFINE_CLOCK_DATA(name)	struct clock_data name
-
-static inline u64 cyc_to_ns(u64 cyc, u32 mult, u32 shift)
-{
-	return (cyc * mult) >> shift;
-}
-
-/*
- * Atomically update the sched_clock epoch.  Your update callback will
- * be called from a timer before the counter wraps - read the current
- * counter value, and call this function to safely move the epochs
- * forward.  Only use this from the update callback.
- */
-static inline void update_sched_clock(struct clock_data *cd, u32 cyc, u32 mask)
-{
-	unsigned long flags;
-	u64 ns = cd->epoch_ns +
-		cyc_to_ns((cyc - cd->epoch_cyc) & mask, cd->mult, cd->shift);
-
-	/*
-	 * Write epoch_cyc and epoch_ns in a way that the update is
-	 * detectable in cyc_to_fixed_sched_clock().
-	 */
-	raw_local_irq_save(flags);
-	cd->epoch_cyc = cyc;
-	smp_wmb();
-	cd->epoch_ns = ns;
-	smp_wmb();
-	cd->epoch_cyc_copy = cyc;
-	raw_local_irq_restore(flags);
-}
-
-/*
- * If your clock rate is known at compile time, using this will allow
- * you to optimize the mult/shift loads away.  This is paired with
- * init_fixed_sched_clock() to ensure that your mult/shift are correct.
- */
-static inline unsigned long long cyc_to_fixed_sched_clock(struct clock_data *cd,
-	u32 cyc, u32 mask, u32 mult, u32 shift)
-{
-	u64 epoch_ns;
-	u32 epoch_cyc;
-
-	/*
-	 * Load the epoch_cyc and epoch_ns atomically.  We do this by
-	 * ensuring that we always write epoch_cyc, epoch_ns and
-	 * epoch_cyc_copy in strict order, and read them in strict order.
-	 * If epoch_cyc and epoch_cyc_copy are not equal, then we're in
-	 * the middle of an update, and we should repeat the load.
-	 */
-	do {
-		epoch_cyc = cd->epoch_cyc;
-		smp_rmb();
-		epoch_ns = cd->epoch_ns;
-		smp_rmb();
-	} while (epoch_cyc != cd->epoch_cyc_copy);
-
-	return epoch_ns + cyc_to_ns((cyc - epoch_cyc) & mask, mult, shift);
-}
-
-/*
- * Otherwise, you need to use this, which will obtain the mult/shift
- * from the clock_data structure.  Use init_sched_clock() with this.
- */
-static inline unsigned long long cyc_to_sched_clock(struct clock_data *cd,
-	u32 cyc, u32 mask)
-{
-	return cyc_to_fixed_sched_clock(cd, cyc, mask, cd->mult, cd->shift);
-}
-
-/*
- * Initialize the clock data - calculate the appropriate multiplier
- * and shift.  Also setup a timer to ensure that the epoch is refreshed
- * at the appropriate time interval, which will call your update
- * handler.
- */
-void init_sched_clock(struct clock_data *, void (*)(void),
-	unsigned int, unsigned long);
-
-/*
- * Use this initialization function rather than init_sched_clock() if
- * you're using cyc_to_fixed_sched_clock, which will warn if your
- * constants are incorrect.
- */
-static inline void init_fixed_sched_clock(struct clock_data *cd,
-	void (*update)(void), unsigned int bits, unsigned long rate,
-	u32 mult, u32 shift)
-{
-	init_sched_clock(cd, update, bits, rate);
-	if (cd->mult != mult || cd->shift != shift) {
-		pr_crit("sched_clock: wrong multiply/shift: %u>>%u vs calculated %u>>%u\n"
-			"sched_clock: fix multiply/shift to avoid scheduler hiccups\n",
-			mult, shift, cd->mult, cd->shift);
-	}
-}
-
 extern void sched_clock_postinit(void);
+extern void setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate);
 
 #endif
diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h
index 915696d..23ebc0c 100644
--- a/arch/arm/include/asm/setup.h
+++ b/arch/arm/include/asm/setup.h
@@ -192,11 +192,7 @@ static const struct tagtable __tagtable_##fn __tag = { tag, fn }
 /*
  * Memory map description
  */
-#ifdef CONFIG_ARCH_EP93XX
-# define NR_BANKS 16
-#else
-# define NR_BANKS 8
-#endif
+#define NR_BANKS	CONFIG_ARM_NR_BANKS
 
 struct membank {
 	phys_addr_t start;
diff --git a/arch/arm/include/asm/socket.h b/arch/arm/include/asm/socket.h
index 90ffd04..dec6f9a 100644
--- a/arch/arm/include/asm/socket.h
+++ b/arch/arm/include/asm/socket.h
@@ -62,4 +62,7 @@
 
 #define SO_RXQ_OVFL             40
 
+#define SO_WIFI_STATUS		41
+#define SCM_WIFI_STATUS		SO_WIFI_STATUS
+
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/arm/include/asm/swab.h b/arch/arm/include/asm/swab.h
index 9997ad2..32ee164 100644
--- a/arch/arm/include/asm/swab.h
+++ b/arch/arm/include/asm/swab.h
@@ -24,12 +24,13 @@
 
 #if defined(__KERNEL__) && __LINUX_ARM_ARCH__ >= 6
 
-static inline __attribute_const__ __u16 __arch_swab16(__u16 x)
+static inline __attribute_const__ __u32 __arch_swahb32(__u32 x)
 {
 	__asm__ ("rev16 %0, %1" : "=r" (x) : "r" (x));
 	return x;
 }
-#define __arch_swab16 __arch_swab16
+#define __arch_swahb32 __arch_swahb32
+#define __arch_swab16(x) ((__u16)__arch_swahb32(x))
 
 static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
 {
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index 984014b..e4c96cc 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -80,6 +80,14 @@ struct siginfo;
 void arm_notify_die(const char *str, struct pt_regs *regs, struct siginfo *info,
 		unsigned long err, unsigned long trap);
 
+#ifdef CONFIG_ARM_LPAE
+#define FAULT_CODE_ALIGNMENT	33
+#define FAULT_CODE_DEBUG	34
+#else
+#define FAULT_CODE_ALIGNMENT	1
+#define FAULT_CODE_DEBUG	2
+#endif
+
 void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int,
 				       struct pt_regs *),
 		     int sig, int code, const char *name);
@@ -100,7 +108,7 @@ extern void __show_regs(struct pt_regs *);
 extern int __pure cpu_architecture(void);
 extern void cpu_init(void);
 
-void arm_machine_restart(char mode, const char *cmd);
+void soft_restart(unsigned long);
 extern void (*arm_pm_restart)(char str, const char *cmd);
 
 #define UDBG_UNDEFINED	(1 << 0)
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index 7b5cc8d..0f30c3a 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -142,7 +142,6 @@ extern void vfp_flush_hwstate(struct thread_info *);
 #define TIF_POLLING_NRFLAG	16
 #define TIF_USING_IWMMXT	17
 #define TIF_MEMDIE		18	/* is terminating due to OOM killer */
-#define TIF_FREEZE		19
 #define TIF_RESTORE_SIGMASK	20
 #define TIF_SECCOMP		21
 
@@ -152,7 +151,6 @@ extern void vfp_flush_hwstate(struct thread_info *);
 #define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
 #define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
 #define _TIF_USING_IWMMXT	(1 << TIF_USING_IWMMXT)
-#define _TIF_FREEZE		(1 << TIF_FREEZE)
 #define _TIF_RESTORE_SIGMASK	(1 << TIF_RESTORE_SIGMASK)
 #define _TIF_SECCOMP		(1 << TIF_SECCOMP)
 
diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h
index 265f908..5d3ed7e3 100644
--- a/arch/arm/include/asm/tlb.h
+++ b/arch/arm/include/asm/tlb.h
@@ -202,8 +202,18 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
 	tlb_remove_page(tlb, pte);
 }
 
+static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmdp,
+				  unsigned long addr)
+{
+#ifdef CONFIG_ARM_LPAE
+	tlb_add_flush(tlb, addr);
+	tlb_remove_page(tlb, virt_to_page(pmdp));
+#endif
+}
+
 #define pte_free_tlb(tlb, ptep, addr)	__pte_free_tlb(tlb, ptep, addr)
-#define pmd_free_tlb(tlb, pmdp, addr)	pmd_free((tlb)->mm, pmdp)
+#define pmd_free_tlb(tlb, pmdp, addr)	__pmd_free_tlb(tlb, pmdp, addr)
+#define pud_free_tlb(tlb, pudp, addr)	pud_free((tlb)->mm, pudp)
 
 #define tlb_migrate_finish(mm)		do { } while (0)
 
diff --git a/arch/arm/include/asm/topology.h b/arch/arm/include/asm/topology.h
index a7e457e..58b8b84 100644
--- a/arch/arm/include/asm/topology.h
+++ b/arch/arm/include/asm/topology.h
@@ -25,7 +25,7 @@ extern struct cputopo_arm cpu_topology[NR_CPUS];
 
 void init_cpu_topology(void);
 void store_cpu_topology(unsigned int cpuid);
-const struct cpumask *cpu_coregroup_mask(unsigned int cpu);
+const struct cpumask *cpu_coregroup_mask(int cpu);
 
 #else
 
diff --git a/arch/arm/include/asm/types.h b/arch/arm/include/asm/types.h
index 48192ac..28beab9 100644
--- a/arch/arm/include/asm/types.h
+++ b/arch/arm/include/asm/types.h
@@ -3,12 +3,6 @@
 
 #include <asm-generic/int-ll64.h>
 
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-#endif /* __ASSEMBLY__ */
-
 /*
  * These aren't exported outside the kernel to avoid name space clashes
  */
diff --git a/arch/arm/include/asm/unwind.h b/arch/arm/include/asm/unwind.h
index a5edf42..d1c3f3a 100644
--- a/arch/arm/include/asm/unwind.h
+++ b/arch/arm/include/asm/unwind.h
@@ -30,14 +30,15 @@ enum unwind_reason_code {
 };
 
 struct unwind_idx {
-	unsigned long addr;
+	unsigned long addr_offset;
 	unsigned long insn;
 };
 
 struct unwind_table {
 	struct list_head list;
-	struct unwind_idx *start;
-	struct unwind_idx *stop;
+	const struct unwind_idx *start;
+	const struct unwind_idx *origin;
+	const struct unwind_idx *stop;
 	unsigned long begin_addr;
 	unsigned long end_addr;
 };
@@ -49,15 +50,6 @@ extern struct unwind_table *unwind_table_add(unsigned long start,
 extern void unwind_table_del(struct unwind_table *tab);
 extern void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk);
 
-#ifdef CONFIG_ARM_UNWIND
-extern int __init unwind_init(void);
-#else
-static inline int __init unwind_init(void)
-{
-	return 0;
-}
-#endif
-
 #endif	/* !__ASSEMBLY__ */
 
 #ifdef CONFIG_ARM_UNWIND
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 16eed6a..43b740d 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -13,7 +13,7 @@ CFLAGS_REMOVE_return_address.o = -pg
 
 # Object file lists.
 
-obj-y		:= elf.o entry-armv.o entry-common.o irq.o \
+obj-y		:= elf.o entry-armv.o entry-common.o irq.o opcodes.o \
 		   process.o ptrace.o return_address.o setup.o signal.o \
 		   sys_arm.o stacktrace.o time.o traps.o
 
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 9ad50c4..3a456c6 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -36,12 +36,11 @@
 #ifdef CONFIG_MULTI_IRQ_HANDLER
 	ldr	r1, =handle_arch_irq
 	mov	r0, sp
-	ldr	r1, [r1]
 	adr	lr, BSYM(9997f)
-	teq	r1, #0
-	movne	pc, r1
-#endif
+	ldr	pc, [r1]
+#else
 	arch_irq_handler_default
+#endif
 9997:
 	.endm
 
@@ -497,7 +496,7 @@ ENDPROC(__und_usr)
 	.popsection
 	.pushsection __ex_table,"a"
 	.long	1b, 4b
-#if __LINUX_ARM_ARCH__ >= 7
+#if CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7
 	.long	2b, 4b
 	.long	3b, 4b
 #endif
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 08c82fd..14e277d 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -39,8 +39,14 @@
 #error KERNEL_RAM_VADDR must start at 0xXXXX8000
 #endif
 
+#ifdef CONFIG_ARM_LPAE
+	/* LPAE requires an additional page for the PGD */
+#define PG_DIR_SIZE	0x5000
+#define PMD_ORDER	3
+#else
 #define PG_DIR_SIZE	0x4000
 #define PMD_ORDER	2
+#endif
 
 	.globl	swapper_pg_dir
 	.equ	swapper_pg_dir, KERNEL_RAM_VADDR - PG_DIR_SIZE
@@ -164,17 +170,36 @@ __create_page_tables:
 	teq	r0, r6
 	bne	1b
 
+#ifdef CONFIG_ARM_LPAE
+	/*
+	 * Build the PGD table (first level) to point to the PMD table. A PGD
+	 * entry is 64-bit wide.
+	 */
+	mov	r0, r4
+	add	r3, r4, #0x1000			@ first PMD table address
+	orr	r3, r3, #3			@ PGD block type
+	mov	r6, #4				@ PTRS_PER_PGD
+	mov	r7, #1 << (55 - 32)		@ L_PGD_SWAPPER
+1:	str	r3, [r0], #4			@ set bottom PGD entry bits
+	str	r7, [r0], #4			@ set top PGD entry bits
+	add	r3, r3, #0x1000			@ next PMD table
+	subs	r6, r6, #1
+	bne	1b
+
+	add	r4, r4, #0x1000			@ point to the PMD tables
+#endif
+
 	ldr	r7, [r10, #PROCINFO_MM_MMUFLAGS] @ mm_mmuflags
 
 	/*
 	 * Create identity mapping to cater for __enable_mmu.
 	 * This identity mapping will be removed by paging_init().
 	 */
-	adr	r0, __enable_mmu_loc
+	adr	r0, __turn_mmu_on_loc
 	ldmia	r0, {r3, r5, r6}
 	sub	r0, r0, r3			@ virt->phys offset
-	add	r5, r5, r0			@ phys __enable_mmu
-	add	r6, r6, r0			@ phys __enable_mmu_end
+	add	r5, r5, r0			@ phys __turn_mmu_on
+	add	r6, r6, r0			@ phys __turn_mmu_on_end
 	mov	r5, r5, lsr #SECTION_SHIFT
 	mov	r6, r6, lsr #SECTION_SHIFT
 
@@ -219,8 +244,8 @@ __create_page_tables:
 #endif
 
 	/*
-	 * Then map boot params address in r2 or
-	 * the first 1MB of ram if boot params address is not specified.
+	 * Then map boot params address in r2 or the first 1MB (2MB with LPAE)
+	 * of ram if boot params address is not specified.
 	 */
 	mov	r0, r2, lsr #SECTION_SHIFT
 	movs	r0, r0, lsl #SECTION_SHIFT
@@ -251,7 +276,15 @@ __create_page_tables:
 	mov	r3, r7, lsr #SECTION_SHIFT
 	ldr	r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
 	orr	r3, r7, r3, lsl #SECTION_SHIFT
+#ifdef CONFIG_ARM_LPAE
+	mov	r7, #1 << (54 - 32)		@ XN
+#else
+	orr	r3, r3, #PMD_SECT_XN
+#endif
 1:	str	r3, [r0], #4
+#ifdef CONFIG_ARM_LPAE
+	str	r7, [r0], #4
+#endif
 	add	r3, r3, #1 << SECTION_SHIFT
 	cmp	r0, r6
 	blo	1b
@@ -283,14 +316,17 @@ __create_page_tables:
 	str	r3, [r0]
 #endif
 #endif
+#ifdef CONFIG_ARM_LPAE
+	sub	r4, r4, #0x1000		@ point to the PGD table
+#endif
 	mov	pc, lr
 ENDPROC(__create_page_tables)
 	.ltorg
 	.align
-__enable_mmu_loc:
+__turn_mmu_on_loc:
 	.long	.
-	.long	__enable_mmu
-	.long	__enable_mmu_end
+	.long	__turn_mmu_on
+	.long	__turn_mmu_on_end
 
 #if defined(CONFIG_SMP)
 	__CPUINIT
@@ -374,12 +410,17 @@ __enable_mmu:
 #ifdef CONFIG_CPU_ICACHE_DISABLE
 	bic	r0, r0, #CR_I
 #endif
+#ifdef CONFIG_ARM_LPAE
+	mov	r5, #0
+	mcrr	p15, 0, r4, r5, c2		@ load TTBR0
+#else
 	mov	r5, #(domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \
 		      domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \
 		      domain_val(DOMAIN_TABLE, DOMAIN_MANAGER) | \
 		      domain_val(DOMAIN_IO, DOMAIN_CLIENT))
 	mcr	p15, 0, r5, c3, c0, 0		@ load domain access register
 	mcr	p15, 0, r4, c2, c0, 0		@ load page table pointer
+#endif
 	b	__turn_mmu_on
 ENDPROC(__enable_mmu)
 
@@ -398,15 +439,19 @@ ENDPROC(__enable_mmu)
  * other registers depend on the function called upon completion
  */
 	.align	5
-__turn_mmu_on:
+	.pushsection	.idmap.text, "ax"
+ENTRY(__turn_mmu_on)
 	mov	r0, r0
+	instr_sync
 	mcr	p15, 0, r0, c1, c0, 0		@ write control reg
 	mrc	p15, 0, r3, c0, c0, 0		@ read id reg
+	instr_sync
 	mov	r3, r3
 	mov	r3, r13
 	mov	pc, r3
-__enable_mmu_end:
+__turn_mmu_on_end:
 ENDPROC(__turn_mmu_on)
+	.popsection
 
 
 #ifdef CONFIG_SMP_ON_UP
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index 814a52a9..d6a95ef 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -1016,10 +1016,10 @@ static int __init arch_hw_breakpoint_init(void)
 	}
 
 	/* Register debug fault handler. */
-	hook_fault_code(2, hw_breakpoint_pending, SIGTRAP, TRAP_HWBKPT,
-			"watchpoint debug exception");
-	hook_ifault_code(2, hw_breakpoint_pending, SIGTRAP, TRAP_HWBKPT,
-			"breakpoint debug exception");
+	hook_fault_code(FAULT_CODE_DEBUG, hw_breakpoint_pending, SIGTRAP,
+			TRAP_HWBKPT, "watchpoint debug exception");
+	hook_ifault_code(FAULT_CODE_DEBUG, hw_breakpoint_pending, SIGTRAP,
+			TRAP_HWBKPT, "breakpoint debug exception");
 
 	/* Register hotplug notifier. */
 	register_cpu_notifier(&dbg_reset_nb);
diff --git a/arch/arm/kernel/kprobes-arm.c b/arch/arm/kernel/kprobes-arm.c
index 9fe8910..8a30c89 100644
--- a/arch/arm/kernel/kprobes-arm.c
+++ b/arch/arm/kernel/kprobes-arm.c
@@ -519,10 +519,12 @@ static const union decode_item arm_cccc_0000_____1001_table[] = {
 static const union decode_item arm_cccc_0001_____1001_table[] = {
 	/* Synchronization primitives					*/
 
+#if __LINUX_ARM_ARCH__ < 6
+	/* Deprecated on ARMv6 and may be UNDEFINED on v7		*/
 	/* SMP/SWPB		cccc 0001 0x00 xxxx xxxx xxxx 1001 xxxx */
 	DECODE_EMULATEX	(0x0fb000f0, 0x01000090, emulate_rd12rn16rm0_rwflags_nopc,
 						 REGS(NOPC, NOPC, 0, 0, NOPC)),
-
+#endif
 	/* LDREX/STREX{,D,B,H}	cccc 0001 1xxx xxxx xxxx xxxx 1001 xxxx */
 	/* And unallocated instructions...				*/
 	DECODE_END
diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c
index fc82de8..ba32b39 100644
--- a/arch/arm/kernel/kprobes-test-arm.c
+++ b/arch/arm/kernel/kprobes-test-arm.c
@@ -427,18 +427,25 @@ void kprobe_arm_test_cases(void)
 
 	TEST_GROUP("Synchronization primitives")
 
-	/*
-	 * Use hard coded constants for SWP instructions to avoid warnings
-	 * about deprecated instructions.
-	 */
-	TEST_RP( ".word 0xe108e097 @ swp	lr, r",7,VAL2,", [r",8,0,"]")
-	TEST_R(  ".word 0x610d0091 @ swpvs	r0, r",1,VAL1,", [sp]")
-	TEST_RP( ".word 0xe10cd09e @ swp	sp, r",14,VAL2,", [r",12,13*4,"]")
+#if __LINUX_ARM_ARCH__ < 6
+	TEST_RP("swp	lr, r",7,VAL2,", [r",8,0,"]")
+	TEST_R( "swpvs	r0, r",1,VAL1,", [sp]")
+	TEST_RP("swp	sp, r",14,VAL2,", [r",12,13*4,"]")
+#else
+	TEST_UNSUPPORTED(".word 0xe108e097 @ swp	lr, r7, [r8]")
+	TEST_UNSUPPORTED(".word 0x610d0091 @ swpvs	r0, r1, [sp]")
+	TEST_UNSUPPORTED(".word 0xe10cd09e @ swp	sp, r14 [r12]")
+#endif
 	TEST_UNSUPPORTED(".word 0xe102f091 @ swp pc, r1, [r2]")
 	TEST_UNSUPPORTED(".word 0xe102009f @ swp r0, pc, [r2]")
 	TEST_UNSUPPORTED(".word 0xe10f0091 @ swp r0, r1, [pc]")
-	TEST_RP( ".word 0xe148e097 @ swpb	lr, r",7,VAL2,", [r",8,0,"]")
-	TEST_R(  ".word 0x614d0091 @ swpvsb	r0, r",1,VAL1,", [sp]")
+#if __LINUX_ARM_ARCH__ < 6
+	TEST_RP("swpb	lr, r",7,VAL2,", [r",8,0,"]")
+	TEST_R( "swpvsb	r0, r",1,VAL1,", [sp]")
+#else
+	TEST_UNSUPPORTED(".word 0xe148e097 @ swpb	lr, r7, [r8]")
+	TEST_UNSUPPORTED(".word 0x614d0091 @ swpvsb	r0, r1, [sp]")
+#endif
 	TEST_UNSUPPORTED(".word 0xe142f091 @ swpb pc, r1, [r2]")
 
 	TEST_UNSUPPORTED(".word	0xe1100090") /* Unallocated space */
@@ -550,7 +557,7 @@ void kprobe_arm_test_cases(void)
 	TEST_RPR(  "strccd	r",8, VAL2,", [r",13,0, ", r",12,48,"]")
 	TEST_RPR(  "strd	r",4, VAL1,", [r",2, 24,", r",3, 48,"]!")
 	TEST_RPR(  "strcsd	r",12,VAL2,", [r",11,48,", -r",10,24,"]!")
-	TEST_RPR(  "strd	r",2, VAL1,", [r",3, 24,"], r",4,48,"")
+	TEST_RPR(  "strd	r",2, VAL1,", [r",5, 24,"], r",4,48,"")
 	TEST_RPR(  "strd	r",10,VAL2,", [r",9, 48,"], -r",7,24,"")
 	TEST_UNSUPPORTED(".word 0xe1afc0fa	@ strd r12, [pc, r10]!")
 
diff --git a/arch/arm/kernel/kprobes-test-thumb.c b/arch/arm/kernel/kprobes-test-thumb.c
index 5e726c3..5d8b857 100644
--- a/arch/arm/kernel/kprobes-test-thumb.c
+++ b/arch/arm/kernel/kprobes-test-thumb.c
@@ -222,8 +222,8 @@ void kprobe_thumb16_test_cases(void)
 DONT_TEST_IN_ITBLOCK(
 	TEST_BF_R(  "cbnz	r",0,0, ", 2f")
 	TEST_BF_R(  "cbz	r",2,-1,", 2f")
-	TEST_BF_RX( "cbnz	r",4,1, ", 2f",0x20)
-	TEST_BF_RX( "cbz	r",7,0, ", 2f",0x40)
+	TEST_BF_RX( "cbnz	r",4,1, ", 2f", SPACE_0x20)
+	TEST_BF_RX( "cbz	r",7,0, ", 2f", SPACE_0x40)
 )
 	TEST_R("sxth	r0, r",7, HH1,"")
 	TEST_R("sxth	r7, r",0, HH2,"")
@@ -246,7 +246,7 @@ DONT_TEST_IN_ITBLOCK(
 	TESTCASE_START(code)		\
 	TEST_ARG_PTR(13, offset)	\
 	TEST_ARG_END("")		\
-	TEST_BRANCH_F(code,0)		\
+	TEST_BRANCH_F(code)		\
 	TESTCASE_END
 
 	TEST("push	{r0}")
@@ -319,8 +319,8 @@ CONDITION_INSTRUCTIONS(8,
 
 	TEST_BF(  "b	2f")
 	TEST_BB(  "b	2b")
-	TEST_BF_X("b	2f", 0x400)
-	TEST_BB_X("b	2b", 0x400)
+	TEST_BF_X("b	2f", SPACE_0x400)
+	TEST_BB_X("b	2b", SPACE_0x400)
 
 	TEST_GROUP("Testing instructions in IT blocks")
 
@@ -746,7 +746,7 @@ CONDITION_INSTRUCTIONS(22,
 	TEST_BB("bne.w	2b")
 	TEST_BF("bgt.w	2f")
 	TEST_BB("blt.w	2b")
-	TEST_BF_X("bpl.w	2f",0x1000)
+	TEST_BF_X("bpl.w	2f", SPACE_0x1000)
 )
 
 	TEST_UNSUPPORTED("msr	cpsr, r0")
@@ -786,11 +786,11 @@ CONDITION_INSTRUCTIONS(22,
 
 	TEST_BF(  "b.w	2f")
 	TEST_BB(  "b.w	2b")
-	TEST_BF_X("b.w	2f", 0x1000)
+	TEST_BF_X("b.w	2f", SPACE_0x1000)
 
 	TEST_BF(  "bl.w	2f")
 	TEST_BB(  "bl.w	2b")
-	TEST_BB_X("bl.w	2b", 0x1000)
+	TEST_BB_X("bl.w	2b", SPACE_0x1000)
 
 	TEST_X(	"blx	__dummy_arm_subroutine",
 		".arm				\n\t"
diff --git a/arch/arm/kernel/kprobes-test.c b/arch/arm/kernel/kprobes-test.c
index e17cdd6..1862d8f 100644
--- a/arch/arm/kernel/kprobes-test.c
+++ b/arch/arm/kernel/kprobes-test.c
@@ -202,6 +202,8 @@
 #include <linux/slab.h>
 #include <linux/kprobes.h>
 
+#include <asm/opcodes.h>
+
 #include "kprobes.h"
 #include "kprobes-test.h"
 
@@ -1050,65 +1052,9 @@ static int test_instance;
 
 static unsigned long test_check_cc(int cc, unsigned long cpsr)
 {
-	unsigned long temp;
-
-	switch (cc) {
-	case 0x0: /* eq */
-		return cpsr & PSR_Z_BIT;
-
-	case 0x1: /* ne */
-		return (~cpsr) & PSR_Z_BIT;
-
-	case 0x2: /* cs */
-		return cpsr & PSR_C_BIT;
-
-	case 0x3: /* cc */
-		return (~cpsr) & PSR_C_BIT;
-
-	case 0x4: /* mi */
-		return cpsr & PSR_N_BIT;
-
-	case 0x5: /* pl */
-		return (~cpsr) & PSR_N_BIT;
-
-	case 0x6: /* vs */
-		return cpsr & PSR_V_BIT;
-
-	case 0x7: /* vc */
-		return (~cpsr) & PSR_V_BIT;
+	int ret = arm_check_condition(cc << 28, cpsr);
 
-	case 0x8: /* hi */
-		cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */
-		return cpsr & PSR_C_BIT;
-
-	case 0x9: /* ls */
-		cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */
-		return (~cpsr) & PSR_C_BIT;
-
-	case 0xa: /* ge */
-		cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
-		return (~cpsr) & PSR_N_BIT;
-
-	case 0xb: /* lt */
-		cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
-		return cpsr & PSR_N_BIT;
-
-	case 0xc: /* gt */
-		temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
-		temp |= (cpsr << 1);	   /* PSR_N_BIT |= PSR_Z_BIT */
-		return (~temp) & PSR_N_BIT;
-
-	case 0xd: /* le */
-		temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
-		temp |= (cpsr << 1);	   /* PSR_N_BIT |= PSR_Z_BIT */
-		return temp & PSR_N_BIT;
-
-	case 0xe: /* al */
-	case 0xf: /* unconditional */
-		return true;
-	}
-	BUG();
-	return false;
+	return (ret != ARM_OPCODE_CONDTEST_FAIL);
 }
 
 static int is_last_scenario;
@@ -1128,7 +1074,9 @@ static unsigned long test_context_cpsr(int scenario)
 
 	if (!test_case_is_thumb) {
 		/* Testing ARM code */
-		probe_should_run = test_check_cc(current_instruction >> 28, cpsr) != 0;
+		int cc = current_instruction >> 28;
+
+		probe_should_run = test_check_cc(cc, cpsr) != 0;
 		if (scenario == 15)
 			is_last_scenario = true;
 
diff --git a/arch/arm/kernel/kprobes-test.h b/arch/arm/kernel/kprobes-test.h
index 0dc5d77..e28a869 100644
--- a/arch/arm/kernel/kprobes-test.h
+++ b/arch/arm/kernel/kprobes-test.h
@@ -149,23 +149,31 @@ struct test_arg_end {
 	"1:	"instruction"				\n\t"	\
 	"	nop					\n\t"
 
-#define TEST_BRANCH_F(instruction, xtra_dist)			\
+#define TEST_BRANCH_F(instruction)				\
 	TEST_INSTRUCTION(instruction)				\
-	".if "#xtra_dist"				\n\t"	\
 	"	b	99f				\n\t"	\
-	".space "#xtra_dist"				\n\t"	\
-	".endif						\n\t"	\
+	"2:	nop					\n\t"
+
+#define TEST_BRANCH_B(instruction)				\
+	"	b	50f				\n\t"	\
+	"	b	99f				\n\t"	\
+	"2:	nop					\n\t"	\
+	"	b	99f				\n\t"	\
+	TEST_INSTRUCTION(instruction)
+
+#define TEST_BRANCH_FX(instruction, codex)			\
+	TEST_INSTRUCTION(instruction)				\
+	"	b	99f				\n\t"	\
+	codex"						\n\t"	\
 	"	b	99f				\n\t"	\
 	"2:	nop					\n\t"
 
-#define TEST_BRANCH_B(instruction, xtra_dist)			\
+#define TEST_BRANCH_BX(instruction, codex)			\
 	"	b	50f				\n\t"	\
 	"	b	99f				\n\t"	\
 	"2:	nop					\n\t"	\
 	"	b	99f				\n\t"	\
-	".if "#xtra_dist"				\n\t"	\
-	".space "#xtra_dist"				\n\t"	\
-	".endif						\n\t"	\
+	codex"						\n\t"	\
 	TEST_INSTRUCTION(instruction)
 
 #define TESTCASE_END						\
@@ -301,47 +309,60 @@ struct test_arg_end {
 	TESTCASE_START(code1 #reg1 code2)	\
 	TEST_ARG_PTR(reg1, val1)		\
 	TEST_ARG_END("")			\
-	TEST_BRANCH_F(code1 #reg1 code2, 0)	\
+	TEST_BRANCH_F(code1 #reg1 code2)	\
 	TESTCASE_END
 
-#define TEST_BF_X(code, xtra_dist)		\
+#define TEST_BF(code)				\
 	TESTCASE_START(code)			\
 	TEST_ARG_END("")			\
-	TEST_BRANCH_F(code, xtra_dist)		\
+	TEST_BRANCH_F(code)			\
 	TESTCASE_END
 
-#define TEST_BB_X(code, xtra_dist)		\
+#define TEST_BB(code)				\
 	TESTCASE_START(code)			\
 	TEST_ARG_END("")			\
-	TEST_BRANCH_B(code, xtra_dist)		\
+	TEST_BRANCH_B(code)			\
 	TESTCASE_END
 
-#define TEST_BF_RX(code1, reg, val, code2, xtra_dist)	\
-	TESTCASE_START(code1 #reg code2)		\
-	TEST_ARG_REG(reg, val)				\
-	TEST_ARG_END("")				\
-	TEST_BRANCH_F(code1 #reg code2, xtra_dist)	\
+#define TEST_BF_R(code1, reg, val, code2)	\
+	TESTCASE_START(code1 #reg code2)	\
+	TEST_ARG_REG(reg, val)			\
+	TEST_ARG_END("")			\
+	TEST_BRANCH_F(code1 #reg code2)		\
 	TESTCASE_END
 
-#define TEST_BB_RX(code1, reg, val, code2, xtra_dist)	\
-	TESTCASE_START(code1 #reg code2)		\
-	TEST_ARG_REG(reg, val)				\
-	TEST_ARG_END("")				\
-	TEST_BRANCH_B(code1 #reg code2, xtra_dist)	\
+#define TEST_BB_R(code1, reg, val, code2)	\
+	TESTCASE_START(code1 #reg code2)	\
+	TEST_ARG_REG(reg, val)			\
+	TEST_ARG_END("")			\
+	TEST_BRANCH_B(code1 #reg code2)		\
 	TESTCASE_END
 
-#define TEST_BF(code)	TEST_BF_X(code, 0)
-#define TEST_BB(code)	TEST_BB_X(code, 0)
-
-#define TEST_BF_R(code1, reg, val, code2) TEST_BF_RX(code1, reg, val, code2, 0)
-#define TEST_BB_R(code1, reg, val, code2) TEST_BB_RX(code1, reg, val, code2, 0)
-
 #define TEST_BF_RR(code1, reg1, val1, code2, reg2, val2, code3)	\
 	TESTCASE_START(code1 #reg1 code2 #reg2 code3)		\
 	TEST_ARG_REG(reg1, val1)				\
 	TEST_ARG_REG(reg2, val2)				\
 	TEST_ARG_END("")					\
-	TEST_BRANCH_F(code1 #reg1 code2 #reg2 code3, 0)		\
+	TEST_BRANCH_F(code1 #reg1 code2 #reg2 code3)		\
+	TESTCASE_END
+
+#define TEST_BF_X(code, codex)			\
+	TESTCASE_START(code)			\
+	TEST_ARG_END("")			\
+	TEST_BRANCH_FX(code, codex)		\
+	TESTCASE_END
+
+#define TEST_BB_X(code, codex)			\
+	TESTCASE_START(code)			\
+	TEST_ARG_END("")			\
+	TEST_BRANCH_BX(code, codex)		\
+	TESTCASE_END
+
+#define TEST_BF_RX(code1, reg, val, code2, codex)	\
+	TESTCASE_START(code1 #reg code2)		\
+	TEST_ARG_REG(reg, val)				\
+	TEST_ARG_END("")				\
+	TEST_BRANCH_FX(code1 #reg code2, codex)		\
 	TESTCASE_END
 
 #define TEST_X(code, codex)			\
@@ -372,6 +393,25 @@ struct test_arg_end {
 	TESTCASE_END
 
 
+/*
+ * Macros for defining space directives spread over multiple lines.
+ * These are required so the compiler guesses better the length of inline asm
+ * code and will spill the literal pool early enough to avoid generating PC
+ * relative loads with out of range offsets.
+ */
+#define TWICE(x)	x x
+#define SPACE_0x8	TWICE(".space 4\n\t")
+#define SPACE_0x10	TWICE(SPACE_0x8)
+#define SPACE_0x20	TWICE(SPACE_0x10)
+#define SPACE_0x40	TWICE(SPACE_0x20)
+#define SPACE_0x80	TWICE(SPACE_0x40)
+#define SPACE_0x100	TWICE(SPACE_0x80)
+#define SPACE_0x200	TWICE(SPACE_0x100)
+#define SPACE_0x400	TWICE(SPACE_0x200)
+#define SPACE_0x800	TWICE(SPACE_0x400)
+#define SPACE_0x1000	TWICE(SPACE_0x800)
+
+
 /* Various values used in test cases... */
 #define N(val)	(val ^ 0xffffffff)
 #define VAL1	0x12345678
diff --git a/arch/arm/kernel/leds.c b/arch/arm/kernel/leds.c
index 0bcd383..1911dae 100644
--- a/arch/arm/kernel/leds.c
+++ b/arch/arm/kernel/leds.c
@@ -9,7 +9,7 @@
  */
 #include <linux/export.h>
 #include <linux/init.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/syscore_ops.h>
 #include <linux/string.h>
 
@@ -34,8 +34,8 @@ static const struct leds_evt_name evt_names[] = {
 	{ "red",   led_red_on,   led_red_off   },
 };
 
-static ssize_t leds_store(struct sys_device *dev,
-			struct sysdev_attribute *attr,
+static ssize_t leds_store(struct device *dev,
+			struct device_attribute *attr,
 			const char *buf, size_t size)
 {
 	int ret = -EINVAL, len = strcspn(buf, " ");
@@ -69,15 +69,16 @@ static ssize_t leds_store(struct sys_device *dev,
 	return ret;
 }
 
-static SYSDEV_ATTR(event, 0200, NULL, leds_store);
+static DEVICE_ATTR(event, 0200, NULL, leds_store);
 
-static struct sysdev_class leds_sysclass = {
+static struct bus_type leds_subsys = {
 	.name		= "leds",
+	.dev_name	= "leds",
 };
 
-static struct sys_device leds_device = {
+static struct device leds_device = {
 	.id		= 0,
-	.cls		= &leds_sysclass,
+	.bus		= &leds_subsys,
 };
 
 static int leds_suspend(void)
@@ -105,11 +106,11 @@ static struct syscore_ops leds_syscore_ops = {
 static int __init leds_init(void)
 {
 	int ret;
-	ret = sysdev_class_register(&leds_sysclass);
+	ret = subsys_system_register(&leds_subsys, NULL);
 	if (ret == 0)
-		ret = sysdev_register(&leds_device);
+		ret = device_register(&leds_device);
 	if (ret == 0)
-		ret = sysdev_create_file(&leds_device, &attr_event);
+		ret = device_create_file(&leds_device, &dev_attr_event);
 	if (ret == 0)
 		register_syscore_ops(&leds_syscore_ops);
 	return ret;
diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c
index e59bbd4..764bd45 100644
--- a/arch/arm/kernel/machine_kexec.c
+++ b/arch/arm/kernel/machine_kexec.c
@@ -12,12 +12,11 @@
 #include <asm/mmu_context.h>
 #include <asm/cacheflush.h>
 #include <asm/mach-types.h>
+#include <asm/system.h>
 
 extern const unsigned char relocate_new_kernel[];
 extern const unsigned int relocate_new_kernel_size;
 
-extern void setup_mm_for_reboot(char mode);
-
 extern unsigned long kexec_start_address;
 extern unsigned long kexec_indirection_page;
 extern unsigned long kexec_mach_type;
@@ -111,14 +110,6 @@ void machine_kexec(struct kimage *image)
 
 	if (kexec_reinit)
 		kexec_reinit();
-	local_irq_disable();
-	local_fiq_disable();
-	setup_mm_for_reboot(0); /* mode is not used, so just pass 0*/
-	flush_cache_all();
-	outer_flush_all();
-	outer_disable();
-	cpu_proc_fin();
-	outer_inv_all();
-	flush_cache_all();
-	cpu_reset(reboot_code_buffer_phys);
+
+	soft_restart(reboot_code_buffer_phys);
 }
diff --git a/arch/arm/kernel/opcodes.c b/arch/arm/kernel/opcodes.c
new file mode 100644
index 0000000..f8179c6
--- /dev/null
+++ b/arch/arm/kernel/opcodes.c
@@ -0,0 +1,72 @@
+/*
+ *  linux/arch/arm/kernel/opcodes.c
+ *
+ *  A32 condition code lookup feature moved from nwfpe/fpopcode.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <asm/opcodes.h>
+
+#define ARM_OPCODE_CONDITION_UNCOND 0xf
+
+/*
+ * condition code lookup table
+ * index into the table is test code: EQ, NE, ... LT, GT, AL, NV
+ *
+ * bit position in short is condition code: NZCV
+ */
+static const unsigned short cc_map[16] = {
+	0xF0F0,			/* EQ == Z set            */
+	0x0F0F,			/* NE                     */
+	0xCCCC,			/* CS == C set            */
+	0x3333,			/* CC                     */
+	0xFF00,			/* MI == N set            */
+	0x00FF,			/* PL                     */
+	0xAAAA,			/* VS == V set            */
+	0x5555,			/* VC                     */
+	0x0C0C,			/* HI == C set && Z clear */
+	0xF3F3,			/* LS == C clear || Z set */
+	0xAA55,			/* GE == (N==V)           */
+	0x55AA,			/* LT == (N!=V)           */
+	0x0A05,			/* GT == (!Z && (N==V))   */
+	0xF5FA,			/* LE == (Z || (N!=V))    */
+	0xFFFF,			/* AL always              */
+	0			/* NV                     */
+};
+
+/*
+ * Returns:
+ * ARM_OPCODE_CONDTEST_FAIL   - if condition fails
+ * ARM_OPCODE_CONDTEST_PASS   - if condition passes (including AL)
+ * ARM_OPCODE_CONDTEST_UNCOND - if NV condition, or separate unconditional
+ *                              opcode space from v5 onwards
+ *
+ * Code that tests whether a conditional instruction would pass its condition
+ * check should check that return value == ARM_OPCODE_CONDTEST_PASS.
+ *
+ * Code that tests if a condition means that the instruction would be executed
+ * (regardless of conditional or unconditional) should instead check that the
+ * return value != ARM_OPCODE_CONDTEST_FAIL.
+ */
+asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr)
+{
+	u32 cc_bits  = opcode >> 28;
+	u32 psr_cond = psr >> 28;
+	unsigned int ret;
+
+	if (cc_bits != ARM_OPCODE_CONDITION_UNCOND) {
+		if ((cc_map[cc_bits] >> (psr_cond)) & 1)
+			ret = ARM_OPCODE_CONDTEST_PASS;
+		else
+			ret = ARM_OPCODE_CONDTEST_FAIL;
+	} else {
+		ret = ARM_OPCODE_CONDTEST_UNCOND;
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(arm_check_condition);
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index 24e2347..5bb91bf 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -59,8 +59,7 @@ armpmu_get_pmu_id(void)
 }
 EXPORT_SYMBOL_GPL(armpmu_get_pmu_id);
 
-int
-armpmu_get_max_events(void)
+int perf_num_counters(void)
 {
 	int max_events = 0;
 
@@ -69,12 +68,6 @@ armpmu_get_max_events(void)
 
 	return max_events;
 }
-EXPORT_SYMBOL_GPL(armpmu_get_max_events);
-
-int perf_num_counters(void)
-{
-	return armpmu_get_max_events();
-}
 EXPORT_SYMBOL_GPL(perf_num_counters);
 
 #define HW_OP_UNSUPPORTED		0xFFFF
@@ -343,19 +336,25 @@ validate_group(struct perf_event *event)
 {
 	struct perf_event *sibling, *leader = event->group_leader;
 	struct pmu_hw_events fake_pmu;
+	DECLARE_BITMAP(fake_used_mask, ARMPMU_MAX_HWEVENTS);
 
-	memset(&fake_pmu, 0, sizeof(fake_pmu));
+	/*
+	 * Initialise the fake PMU. We only need to populate the
+	 * used_mask for the purposes of validation.
+	 */
+	memset(fake_used_mask, 0, sizeof(fake_used_mask));
+	fake_pmu.used_mask = fake_used_mask;
 
 	if (!validate_event(&fake_pmu, leader))
-		return -ENOSPC;
+		return -EINVAL;
 
 	list_for_each_entry(sibling, &leader->sibling_list, group_entry) {
 		if (!validate_event(&fake_pmu, sibling))
-			return -ENOSPC;
+			return -EINVAL;
 	}
 
 	if (!validate_event(&fake_pmu, event))
-		return -ENOSPC;
+		return -EINVAL;
 
 	return 0;
 }
@@ -374,6 +373,8 @@ armpmu_release_hardware(struct arm_pmu *armpmu)
 {
 	int i, irq, irqs;
 	struct platform_device *pmu_device = armpmu->plat_device;
+	struct arm_pmu_platdata *plat =
+		dev_get_platdata(&pmu_device->dev);
 
 	irqs = min(pmu_device->num_resources, num_possible_cpus());
 
@@ -381,8 +382,11 @@ armpmu_release_hardware(struct arm_pmu *armpmu)
 		if (!cpumask_test_and_clear_cpu(i, &armpmu->active_irqs))
 			continue;
 		irq = platform_get_irq(pmu_device, i);
-		if (irq >= 0)
+		if (irq >= 0) {
+			if (plat && plat->disable_irq)
+				plat->disable_irq(irq);
 			free_irq(irq, armpmu);
+		}
 	}
 
 	release_pmu(armpmu->type);
@@ -396,6 +400,9 @@ armpmu_reserve_hardware(struct arm_pmu *armpmu)
 	int i, err, irq, irqs;
 	struct platform_device *pmu_device = armpmu->plat_device;
 
+	if (!pmu_device)
+		return -ENODEV;
+
 	err = reserve_pmu(armpmu->type);
 	if (err) {
 		pr_warning("unable to reserve pmu\n");
@@ -439,7 +446,8 @@ armpmu_reserve_hardware(struct arm_pmu *armpmu)
 				irq);
 			armpmu_release_hardware(armpmu);
 			return err;
-		}
+		} else if (plat && plat->enable_irq)
+			plat->enable_irq(irq);
 
 		cpumask_set_cpu(i, &armpmu->active_irqs);
 	}
@@ -631,6 +639,9 @@ static struct platform_device_id armpmu_plat_device_ids[] = {
 
 static int __devinit armpmu_device_probe(struct platform_device *pdev)
 {
+	if (!cpu_pmu)
+		return -ENODEV;
+
 	cpu_pmu->plat_device = pdev;
 	return 0;
 }
diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c
index e63d811..533be99 100644
--- a/arch/arm/kernel/perf_event_v6.c
+++ b/arch/arm/kernel/perf_event_v6.c
@@ -65,13 +65,15 @@ enum armv6_counters {
  * accesses/misses in hardware.
  */
 static const unsigned armv6_perf_map[PERF_COUNT_HW_MAX] = {
-	[PERF_COUNT_HW_CPU_CYCLES]	    = ARMV6_PERFCTR_CPU_CYCLES,
-	[PERF_COUNT_HW_INSTRUCTIONS]	    = ARMV6_PERFCTR_INSTR_EXEC,
-	[PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_CACHE_MISSES]	    = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6_PERFCTR_BR_EXEC,
-	[PERF_COUNT_HW_BRANCH_MISSES]	    = ARMV6_PERFCTR_BR_MISPREDICT,
-	[PERF_COUNT_HW_BUS_CYCLES]	    = HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_CPU_CYCLES]		= ARMV6_PERFCTR_CPU_CYCLES,
+	[PERF_COUNT_HW_INSTRUCTIONS]		= ARMV6_PERFCTR_INSTR_EXEC,
+	[PERF_COUNT_HW_CACHE_REFERENCES]	= HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_CACHE_MISSES]		= HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= ARMV6_PERFCTR_BR_EXEC,
+	[PERF_COUNT_HW_BRANCH_MISSES]		= ARMV6_PERFCTR_BR_MISPREDICT,
+	[PERF_COUNT_HW_BUS_CYCLES]		= HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND]	= ARMV6_PERFCTR_IBUF_STALL,
+	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND]	= ARMV6_PERFCTR_LSU_FULL_STALL,
 };
 
 static const unsigned armv6_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
@@ -218,13 +220,15 @@ enum armv6mpcore_perf_types {
  * accesses/misses in hardware.
  */
 static const unsigned armv6mpcore_perf_map[PERF_COUNT_HW_MAX] = {
-	[PERF_COUNT_HW_CPU_CYCLES]	    = ARMV6MPCORE_PERFCTR_CPU_CYCLES,
-	[PERF_COUNT_HW_INSTRUCTIONS]	    = ARMV6MPCORE_PERFCTR_INSTR_EXEC,
-	[PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_CACHE_MISSES]	    = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_BR_EXEC,
-	[PERF_COUNT_HW_BRANCH_MISSES]	    = ARMV6MPCORE_PERFCTR_BR_MISPREDICT,
-	[PERF_COUNT_HW_BUS_CYCLES]	    = HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_CPU_CYCLES]		= ARMV6MPCORE_PERFCTR_CPU_CYCLES,
+	[PERF_COUNT_HW_INSTRUCTIONS]		= ARMV6MPCORE_PERFCTR_INSTR_EXEC,
+	[PERF_COUNT_HW_CACHE_REFERENCES]	= HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_CACHE_MISSES]		= HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= ARMV6MPCORE_PERFCTR_BR_EXEC,
+	[PERF_COUNT_HW_BRANCH_MISSES]		= ARMV6MPCORE_PERFCTR_BR_MISPREDICT,
+	[PERF_COUNT_HW_BUS_CYCLES]		= HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND]	= ARMV6MPCORE_PERFCTR_IBUF_STALL,
+	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND]	= ARMV6MPCORE_PERFCTR_LSU_FULL_STALL,
 };
 
 static const unsigned armv6mpcore_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
index 1ef6d00..460bbbb 100644
--- a/arch/arm/kernel/perf_event_v7.c
+++ b/arch/arm/kernel/perf_event_v7.c
@@ -28,165 +28,87 @@ static struct arm_pmu armv7pmu;
  * they are not available.
  */
 enum armv7_perf_types {
-	ARMV7_PERFCTR_PMNC_SW_INCR		= 0x00,
-	ARMV7_PERFCTR_IFETCH_MISS		= 0x01,
-	ARMV7_PERFCTR_ITLB_MISS			= 0x02,
-	ARMV7_PERFCTR_DCACHE_REFILL		= 0x03,	/* L1 */
-	ARMV7_PERFCTR_DCACHE_ACCESS		= 0x04,	/* L1 */
-	ARMV7_PERFCTR_DTLB_REFILL		= 0x05,
-	ARMV7_PERFCTR_DREAD			= 0x06,
-	ARMV7_PERFCTR_DWRITE			= 0x07,
-	ARMV7_PERFCTR_INSTR_EXECUTED		= 0x08,
-	ARMV7_PERFCTR_EXC_TAKEN			= 0x09,
-	ARMV7_PERFCTR_EXC_EXECUTED		= 0x0A,
-	ARMV7_PERFCTR_CID_WRITE			= 0x0B,
-	/* ARMV7_PERFCTR_PC_WRITE is equivalent to HW_BRANCH_INSTRUCTIONS.
+	ARMV7_PERFCTR_PMNC_SW_INCR			= 0x00,
+	ARMV7_PERFCTR_L1_ICACHE_REFILL			= 0x01,
+	ARMV7_PERFCTR_ITLB_REFILL			= 0x02,
+	ARMV7_PERFCTR_L1_DCACHE_REFILL			= 0x03,
+	ARMV7_PERFCTR_L1_DCACHE_ACCESS			= 0x04,
+	ARMV7_PERFCTR_DTLB_REFILL			= 0x05,
+	ARMV7_PERFCTR_MEM_READ				= 0x06,
+	ARMV7_PERFCTR_MEM_WRITE				= 0x07,
+	ARMV7_PERFCTR_INSTR_EXECUTED			= 0x08,
+	ARMV7_PERFCTR_EXC_TAKEN				= 0x09,
+	ARMV7_PERFCTR_EXC_EXECUTED			= 0x0A,
+	ARMV7_PERFCTR_CID_WRITE				= 0x0B,
+
+	/*
+	 * ARMV7_PERFCTR_PC_WRITE is equivalent to HW_BRANCH_INSTRUCTIONS.
 	 * It counts:
-	 *  - all branch instructions,
+	 *  - all (taken) branch instructions,
 	 *  - instructions that explicitly write the PC,
 	 *  - exception generating instructions.
 	 */
-	ARMV7_PERFCTR_PC_WRITE			= 0x0C,
-	ARMV7_PERFCTR_PC_IMM_BRANCH		= 0x0D,
-	ARMV7_PERFCTR_PC_PROC_RETURN		= 0x0E,
-	ARMV7_PERFCTR_UNALIGNED_ACCESS		= 0x0F,
+	ARMV7_PERFCTR_PC_WRITE				= 0x0C,
+	ARMV7_PERFCTR_PC_IMM_BRANCH			= 0x0D,
+	ARMV7_PERFCTR_PC_PROC_RETURN			= 0x0E,
+	ARMV7_PERFCTR_MEM_UNALIGNED_ACCESS		= 0x0F,
+	ARMV7_PERFCTR_PC_BRANCH_MIS_PRED		= 0x10,
+	ARMV7_PERFCTR_CLOCK_CYCLES			= 0x11,
+	ARMV7_PERFCTR_PC_BRANCH_PRED			= 0x12,
 
 	/* These events are defined by the PMUv2 supplement (ARM DDI 0457A). */
-	ARMV7_PERFCTR_PC_BRANCH_MIS_PRED	= 0x10,
-	ARMV7_PERFCTR_CLOCK_CYCLES		= 0x11,
-	ARMV7_PERFCTR_PC_BRANCH_PRED		= 0x12,
-	ARMV7_PERFCTR_MEM_ACCESS		= 0x13,
-	ARMV7_PERFCTR_L1_ICACHE_ACCESS		= 0x14,
-	ARMV7_PERFCTR_L1_DCACHE_WB		= 0x15,
-	ARMV7_PERFCTR_L2_DCACHE_ACCESS		= 0x16,
-	ARMV7_PERFCTR_L2_DCACHE_REFILL		= 0x17,
-	ARMV7_PERFCTR_L2_DCACHE_WB		= 0x18,
-	ARMV7_PERFCTR_BUS_ACCESS		= 0x19,
-	ARMV7_PERFCTR_MEMORY_ERROR		= 0x1A,
-	ARMV7_PERFCTR_INSTR_SPEC		= 0x1B,
-	ARMV7_PERFCTR_TTBR_WRITE		= 0x1C,
-	ARMV7_PERFCTR_BUS_CYCLES		= 0x1D,
-
-	ARMV7_PERFCTR_CPU_CYCLES		= 0xFF
+	ARMV7_PERFCTR_MEM_ACCESS			= 0x13,
+	ARMV7_PERFCTR_L1_ICACHE_ACCESS			= 0x14,
+	ARMV7_PERFCTR_L1_DCACHE_WB			= 0x15,
+	ARMV7_PERFCTR_L2_CACHE_ACCESS			= 0x16,
+	ARMV7_PERFCTR_L2_CACHE_REFILL			= 0x17,
+	ARMV7_PERFCTR_L2_CACHE_WB			= 0x18,
+	ARMV7_PERFCTR_BUS_ACCESS			= 0x19,
+	ARMV7_PERFCTR_MEM_ERROR				= 0x1A,
+	ARMV7_PERFCTR_INSTR_SPEC			= 0x1B,
+	ARMV7_PERFCTR_TTBR_WRITE			= 0x1C,
+	ARMV7_PERFCTR_BUS_CYCLES			= 0x1D,
+
+	ARMV7_PERFCTR_CPU_CYCLES			= 0xFF
 };
 
 /* ARMv7 Cortex-A8 specific event types */
 enum armv7_a8_perf_types {
-	ARMV7_PERFCTR_WRITE_BUFFER_FULL		= 0x40,
-	ARMV7_PERFCTR_L2_STORE_MERGED		= 0x41,
-	ARMV7_PERFCTR_L2_STORE_BUFF		= 0x42,
-	ARMV7_PERFCTR_L2_ACCESS			= 0x43,
-	ARMV7_PERFCTR_L2_CACH_MISS		= 0x44,
-	ARMV7_PERFCTR_AXI_READ_CYCLES		= 0x45,
-	ARMV7_PERFCTR_AXI_WRITE_CYCLES		= 0x46,
-	ARMV7_PERFCTR_MEMORY_REPLAY		= 0x47,
-	ARMV7_PERFCTR_UNALIGNED_ACCESS_REPLAY	= 0x48,
-	ARMV7_PERFCTR_L1_DATA_MISS		= 0x49,
-	ARMV7_PERFCTR_L1_INST_MISS		= 0x4A,
-	ARMV7_PERFCTR_L1_DATA_COLORING		= 0x4B,
-	ARMV7_PERFCTR_L1_NEON_DATA		= 0x4C,
-	ARMV7_PERFCTR_L1_NEON_CACH_DATA		= 0x4D,
-	ARMV7_PERFCTR_L2_NEON			= 0x4E,
-	ARMV7_PERFCTR_L2_NEON_HIT		= 0x4F,
-	ARMV7_PERFCTR_L1_INST			= 0x50,
-	ARMV7_PERFCTR_PC_RETURN_MIS_PRED	= 0x51,
-	ARMV7_PERFCTR_PC_BRANCH_FAILED		= 0x52,
-	ARMV7_PERFCTR_PC_BRANCH_TAKEN		= 0x53,
-	ARMV7_PERFCTR_PC_BRANCH_EXECUTED	= 0x54,
-	ARMV7_PERFCTR_OP_EXECUTED		= 0x55,
-	ARMV7_PERFCTR_CYCLES_INST_STALL		= 0x56,
-	ARMV7_PERFCTR_CYCLES_INST		= 0x57,
-	ARMV7_PERFCTR_CYCLES_NEON_DATA_STALL	= 0x58,
-	ARMV7_PERFCTR_CYCLES_NEON_INST_STALL	= 0x59,
-	ARMV7_PERFCTR_NEON_CYCLES		= 0x5A,
-
-	ARMV7_PERFCTR_PMU0_EVENTS		= 0x70,
-	ARMV7_PERFCTR_PMU1_EVENTS		= 0x71,
-	ARMV7_PERFCTR_PMU_EVENTS		= 0x72,
+	ARMV7_A8_PERFCTR_L2_CACHE_ACCESS		= 0x43,
+	ARMV7_A8_PERFCTR_L2_CACHE_REFILL		= 0x44,
+	ARMV7_A8_PERFCTR_L1_ICACHE_ACCESS		= 0x50,
+	ARMV7_A8_PERFCTR_STALL_ISIDE			= 0x56,
 };
 
 /* ARMv7 Cortex-A9 specific event types */
 enum armv7_a9_perf_types {
-	ARMV7_PERFCTR_JAVA_HW_BYTECODE_EXEC	= 0x40,
-	ARMV7_PERFCTR_JAVA_SW_BYTECODE_EXEC	= 0x41,
-	ARMV7_PERFCTR_JAZELLE_BRANCH_EXEC	= 0x42,
-
-	ARMV7_PERFCTR_COHERENT_LINE_MISS	= 0x50,
-	ARMV7_PERFCTR_COHERENT_LINE_HIT		= 0x51,
-
-	ARMV7_PERFCTR_ICACHE_DEP_STALL_CYCLES	= 0x60,
-	ARMV7_PERFCTR_DCACHE_DEP_STALL_CYCLES	= 0x61,
-	ARMV7_PERFCTR_TLB_MISS_DEP_STALL_CYCLES	= 0x62,
-	ARMV7_PERFCTR_STREX_EXECUTED_PASSED	= 0x63,
-	ARMV7_PERFCTR_STREX_EXECUTED_FAILED	= 0x64,
-	ARMV7_PERFCTR_DATA_EVICTION		= 0x65,
-	ARMV7_PERFCTR_ISSUE_STAGE_NO_INST	= 0x66,
-	ARMV7_PERFCTR_ISSUE_STAGE_EMPTY		= 0x67,
-	ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE	= 0x68,
-
-	ARMV7_PERFCTR_PREDICTABLE_FUNCT_RETURNS	= 0x6E,
-
-	ARMV7_PERFCTR_MAIN_UNIT_EXECUTED_INST	= 0x70,
-	ARMV7_PERFCTR_SECOND_UNIT_EXECUTED_INST	= 0x71,
-	ARMV7_PERFCTR_LD_ST_UNIT_EXECUTED_INST	= 0x72,
-	ARMV7_PERFCTR_FP_EXECUTED_INST		= 0x73,
-	ARMV7_PERFCTR_NEON_EXECUTED_INST	= 0x74,
-
-	ARMV7_PERFCTR_PLD_FULL_DEP_STALL_CYCLES	= 0x80,
-	ARMV7_PERFCTR_DATA_WR_DEP_STALL_CYCLES	= 0x81,
-	ARMV7_PERFCTR_ITLB_MISS_DEP_STALL_CYCLES	= 0x82,
-	ARMV7_PERFCTR_DTLB_MISS_DEP_STALL_CYCLES	= 0x83,
-	ARMV7_PERFCTR_MICRO_ITLB_MISS_DEP_STALL_CYCLES	= 0x84,
-	ARMV7_PERFCTR_MICRO_DTLB_MISS_DEP_STALL_CYCLES	= 0x85,
-	ARMV7_PERFCTR_DMB_DEP_STALL_CYCLES	= 0x86,
-
-	ARMV7_PERFCTR_INTGR_CLK_ENABLED_CYCLES	= 0x8A,
-	ARMV7_PERFCTR_DATA_ENGINE_CLK_EN_CYCLES	= 0x8B,
-
-	ARMV7_PERFCTR_ISB_INST			= 0x90,
-	ARMV7_PERFCTR_DSB_INST			= 0x91,
-	ARMV7_PERFCTR_DMB_INST			= 0x92,
-	ARMV7_PERFCTR_EXT_INTERRUPTS		= 0x93,
-
-	ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_COMPLETED	= 0xA0,
-	ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_SKIPPED	= 0xA1,
-	ARMV7_PERFCTR_PLE_FIFO_FLUSH		= 0xA2,
-	ARMV7_PERFCTR_PLE_RQST_COMPLETED	= 0xA3,
-	ARMV7_PERFCTR_PLE_FIFO_OVERFLOW		= 0xA4,
-	ARMV7_PERFCTR_PLE_RQST_PROG		= 0xA5
+	ARMV7_A9_PERFCTR_INSTR_CORE_RENAME		= 0x68,
+	ARMV7_A9_PERFCTR_STALL_ICACHE			= 0x60,
+	ARMV7_A9_PERFCTR_STALL_DISPATCH			= 0x66,
 };
 
 /* ARMv7 Cortex-A5 specific event types */
 enum armv7_a5_perf_types {
-	ARMV7_PERFCTR_IRQ_TAKEN			= 0x86,
-	ARMV7_PERFCTR_FIQ_TAKEN			= 0x87,
-
-	ARMV7_PERFCTR_EXT_MEM_RQST		= 0xc0,
-	ARMV7_PERFCTR_NC_EXT_MEM_RQST		= 0xc1,
-	ARMV7_PERFCTR_PREFETCH_LINEFILL		= 0xc2,
-	ARMV7_PERFCTR_PREFETCH_LINEFILL_DROP	= 0xc3,
-	ARMV7_PERFCTR_ENTER_READ_ALLOC		= 0xc4,
-	ARMV7_PERFCTR_READ_ALLOC		= 0xc5,
-
-	ARMV7_PERFCTR_STALL_SB_FULL		= 0xc9,
+	ARMV7_A5_PERFCTR_PREFETCH_LINEFILL		= 0xc2,
+	ARMV7_A5_PERFCTR_PREFETCH_LINEFILL_DROP		= 0xc3,
 };
 
 /* ARMv7 Cortex-A15 specific event types */
 enum armv7_a15_perf_types {
-	ARMV7_PERFCTR_L1_DCACHE_READ_ACCESS	= 0x40,
-	ARMV7_PERFCTR_L1_DCACHE_WRITE_ACCESS	= 0x41,
-	ARMV7_PERFCTR_L1_DCACHE_READ_REFILL	= 0x42,
-	ARMV7_PERFCTR_L1_DCACHE_WRITE_REFILL	= 0x43,
+	ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_READ		= 0x40,
+	ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_WRITE	= 0x41,
+	ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_READ		= 0x42,
+	ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_WRITE	= 0x43,
 
-	ARMV7_PERFCTR_L1_DTLB_READ_REFILL	= 0x4C,
-	ARMV7_PERFCTR_L1_DTLB_WRITE_REFILL	= 0x4D,
+	ARMV7_A15_PERFCTR_DTLB_REFILL_L1_READ		= 0x4C,
+	ARMV7_A15_PERFCTR_DTLB_REFILL_L1_WRITE		= 0x4D,
 
-	ARMV7_PERFCTR_L2_DCACHE_READ_ACCESS	= 0x50,
-	ARMV7_PERFCTR_L2_DCACHE_WRITE_ACCESS	= 0x51,
-	ARMV7_PERFCTR_L2_DCACHE_READ_REFILL	= 0x52,
-	ARMV7_PERFCTR_L2_DCACHE_WRITE_REFILL	= 0x53,
+	ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_READ		= 0x50,
+	ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_WRITE		= 0x51,
+	ARMV7_A15_PERFCTR_L2_CACHE_REFILL_READ		= 0x52,
+	ARMV7_A15_PERFCTR_L2_CACHE_REFILL_WRITE		= 0x53,
 
-	ARMV7_PERFCTR_SPEC_PC_WRITE		= 0x76,
+	ARMV7_A15_PERFCTR_PC_WRITE_SPEC			= 0x76,
 };
 
 /*
@@ -197,13 +119,15 @@ enum armv7_a15_perf_types {
  * accesses/misses in hardware.
  */
 static const unsigned armv7_a8_perf_map[PERF_COUNT_HW_MAX] = {
-	[PERF_COUNT_HW_CPU_CYCLES]	    = ARMV7_PERFCTR_CPU_CYCLES,
-	[PERF_COUNT_HW_INSTRUCTIONS]	    = ARMV7_PERFCTR_INSTR_EXECUTED,
-	[PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_CACHE_MISSES]	    = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
-	[PERF_COUNT_HW_BRANCH_MISSES]	    = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-	[PERF_COUNT_HW_BUS_CYCLES]	    = ARMV7_PERFCTR_CLOCK_CYCLES,
+	[PERF_COUNT_HW_CPU_CYCLES]		= ARMV7_PERFCTR_CPU_CYCLES,
+	[PERF_COUNT_HW_INSTRUCTIONS]		= ARMV7_PERFCTR_INSTR_EXECUTED,
+	[PERF_COUNT_HW_CACHE_REFERENCES]	= ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+	[PERF_COUNT_HW_CACHE_MISSES]		= ARMV7_PERFCTR_L1_DCACHE_REFILL,
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= ARMV7_PERFCTR_PC_WRITE,
+	[PERF_COUNT_HW_BRANCH_MISSES]		= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+	[PERF_COUNT_HW_BUS_CYCLES]		= HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND]	= ARMV7_A8_PERFCTR_STALL_ISIDE,
+	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND]	= HW_OP_UNSUPPORTED,
 };
 
 static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
@@ -217,12 +141,12 @@ static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
 		 * combined.
 		 */
 		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_DCACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DCACHE_REFILL,
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_DCACHE_REFILL,
 		},
 		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_DCACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DCACHE_REFILL,
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_DCACHE_REFILL,
 		},
 		[C(OP_PREFETCH)] = {
 			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
@@ -231,12 +155,12 @@ static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
 	},
 	[C(L1I)] = {
 		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_INST,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_INST_MISS,
+			[C(RESULT_ACCESS)]	= ARMV7_A8_PERFCTR_L1_ICACHE_ACCESS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_ICACHE_REFILL,
 		},
 		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_INST,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_INST_MISS,
+			[C(RESULT_ACCESS)]	= ARMV7_A8_PERFCTR_L1_ICACHE_ACCESS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_ICACHE_REFILL,
 		},
 		[C(OP_PREFETCH)] = {
 			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
@@ -245,12 +169,12 @@ static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
 	},
 	[C(LL)] = {
 		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L2_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L2_CACH_MISS,
+			[C(RESULT_ACCESS)]	= ARMV7_A8_PERFCTR_L2_CACHE_ACCESS,
+			[C(RESULT_MISS)]	= ARMV7_A8_PERFCTR_L2_CACHE_REFILL,
 		},
 		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L2_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L2_CACH_MISS,
+			[C(RESULT_ACCESS)]	= ARMV7_A8_PERFCTR_L2_CACHE_ACCESS,
+			[C(RESULT_MISS)]	= ARMV7_A8_PERFCTR_L2_CACHE_REFILL,
 		},
 		[C(OP_PREFETCH)] = {
 			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
@@ -274,11 +198,11 @@ static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
 	[C(ITLB)] = {
 		[C(OP_READ)] = {
 			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_MISS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_REFILL,
 		},
 		[C(OP_WRITE)] = {
 			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_MISS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_REFILL,
 		},
 		[C(OP_PREFETCH)] = {
 			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
@@ -287,14 +211,12 @@ static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
 	},
 	[C(BPU)] = {
 		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_WRITE,
-			[C(RESULT_MISS)]
-					= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_BRANCH_PRED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
 		},
 		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_WRITE,
-			[C(RESULT_MISS)]
-					= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_BRANCH_PRED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
 		},
 		[C(OP_PREFETCH)] = {
 			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
@@ -321,14 +243,15 @@ static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
  * Cortex-A9 HW events mapping
  */
 static const unsigned armv7_a9_perf_map[PERF_COUNT_HW_MAX] = {
-	[PERF_COUNT_HW_CPU_CYCLES]	    = ARMV7_PERFCTR_CPU_CYCLES,
-	[PERF_COUNT_HW_INSTRUCTIONS]	    =
-					ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE,
-	[PERF_COUNT_HW_CACHE_REFERENCES]    = ARMV7_PERFCTR_DCACHE_ACCESS,
-	[PERF_COUNT_HW_CACHE_MISSES]	    = ARMV7_PERFCTR_DCACHE_REFILL,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
-	[PERF_COUNT_HW_BRANCH_MISSES]	    = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-	[PERF_COUNT_HW_BUS_CYCLES]	    = ARMV7_PERFCTR_CLOCK_CYCLES,
+	[PERF_COUNT_HW_CPU_CYCLES]		= ARMV7_PERFCTR_CPU_CYCLES,
+	[PERF_COUNT_HW_INSTRUCTIONS]		= ARMV7_A9_PERFCTR_INSTR_CORE_RENAME,
+	[PERF_COUNT_HW_CACHE_REFERENCES]	= ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+	[PERF_COUNT_HW_CACHE_MISSES]		= ARMV7_PERFCTR_L1_DCACHE_REFILL,
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= ARMV7_PERFCTR_PC_WRITE,
+	[PERF_COUNT_HW_BRANCH_MISSES]		= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+	[PERF_COUNT_HW_BUS_CYCLES]		= HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND]	= ARMV7_A9_PERFCTR_STALL_ICACHE,
+	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND]	= ARMV7_A9_PERFCTR_STALL_DISPATCH,
 };
 
 static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
@@ -342,12 +265,12 @@ static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
 		 * combined.
 		 */
 		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_DCACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DCACHE_REFILL,
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_DCACHE_REFILL,
 		},
 		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_DCACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DCACHE_REFILL,
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_DCACHE_REFILL,
 		},
 		[C(OP_PREFETCH)] = {
 			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
@@ -357,11 +280,11 @@ static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
 	[C(L1I)] = {
 		[C(OP_READ)] = {
 			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_IFETCH_MISS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_ICACHE_REFILL,
 		},
 		[C(OP_WRITE)] = {
 			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_IFETCH_MISS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_ICACHE_REFILL,
 		},
 		[C(OP_PREFETCH)] = {
 			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
@@ -399,11 +322,11 @@ static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
 	[C(ITLB)] = {
 		[C(OP_READ)] = {
 			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_MISS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_REFILL,
 		},
 		[C(OP_WRITE)] = {
 			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_MISS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_REFILL,
 		},
 		[C(OP_PREFETCH)] = {
 			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
@@ -412,14 +335,12 @@ static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
 	},
 	[C(BPU)] = {
 		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_WRITE,
-			[C(RESULT_MISS)]
-					= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_BRANCH_PRED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
 		},
 		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_WRITE,
-			[C(RESULT_MISS)]
-					= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_BRANCH_PRED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
 		},
 		[C(OP_PREFETCH)] = {
 			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
@@ -446,13 +367,15 @@ static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
  * Cortex-A5 HW events mapping
  */
 static const unsigned armv7_a5_perf_map[PERF_COUNT_HW_MAX] = {
-	[PERF_COUNT_HW_CPU_CYCLES]	    = ARMV7_PERFCTR_CPU_CYCLES,
-	[PERF_COUNT_HW_INSTRUCTIONS]	    = ARMV7_PERFCTR_INSTR_EXECUTED,
-	[PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_CACHE_MISSES]	    = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
-	[PERF_COUNT_HW_BRANCH_MISSES]	    = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-	[PERF_COUNT_HW_BUS_CYCLES]	    = HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_CPU_CYCLES]		= ARMV7_PERFCTR_CPU_CYCLES,
+	[PERF_COUNT_HW_INSTRUCTIONS]		= ARMV7_PERFCTR_INSTR_EXECUTED,
+	[PERF_COUNT_HW_CACHE_REFERENCES]	= ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+	[PERF_COUNT_HW_CACHE_MISSES]		= ARMV7_PERFCTR_L1_DCACHE_REFILL,
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= ARMV7_PERFCTR_PC_WRITE,
+	[PERF_COUNT_HW_BRANCH_MISSES]		= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+	[PERF_COUNT_HW_BUS_CYCLES]		= HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND]	= HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND]	= HW_OP_UNSUPPORTED,
 };
 
 static const unsigned armv7_a5_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
@@ -460,42 +383,34 @@ static const unsigned armv7_a5_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
 					[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
 	[C(L1D)] = {
 		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]
-					= ARMV7_PERFCTR_DCACHE_ACCESS,
-			[C(RESULT_MISS)]
-					= ARMV7_PERFCTR_DCACHE_REFILL,
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_DCACHE_REFILL,
 		},
 		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]
-					= ARMV7_PERFCTR_DCACHE_ACCESS,
-			[C(RESULT_MISS)]
-					= ARMV7_PERFCTR_DCACHE_REFILL,
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_DCACHE_REFILL,
 		},
 		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]
-					= ARMV7_PERFCTR_PREFETCH_LINEFILL,
-			[C(RESULT_MISS)]
-					= ARMV7_PERFCTR_PREFETCH_LINEFILL_DROP,
+			[C(RESULT_ACCESS)]	= ARMV7_A5_PERFCTR_PREFETCH_LINEFILL,
+			[C(RESULT_MISS)]	= ARMV7_A5_PERFCTR_PREFETCH_LINEFILL_DROP,
 		},
 	},
 	[C(L1I)] = {
 		[C(OP_READ)] = {
 			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_ICACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_IFETCH_MISS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_ICACHE_REFILL,
 		},
 		[C(OP_WRITE)] = {
 			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_ICACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_IFETCH_MISS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_ICACHE_REFILL,
 		},
 		/*
 		 * The prefetch counters don't differentiate between the I
 		 * side and the D side.
 		 */
 		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]
-					= ARMV7_PERFCTR_PREFETCH_LINEFILL,
-			[C(RESULT_MISS)]
-					= ARMV7_PERFCTR_PREFETCH_LINEFILL_DROP,
+			[C(RESULT_ACCESS)]	= ARMV7_A5_PERFCTR_PREFETCH_LINEFILL,
+			[C(RESULT_MISS)]	= ARMV7_A5_PERFCTR_PREFETCH_LINEFILL_DROP,
 		},
 	},
 	[C(LL)] = {
@@ -529,11 +444,11 @@ static const unsigned armv7_a5_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
 	[C(ITLB)] = {
 		[C(OP_READ)] = {
 			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_MISS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_REFILL,
 		},
 		[C(OP_WRITE)] = {
 			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_MISS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_REFILL,
 		},
 		[C(OP_PREFETCH)] = {
 			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
@@ -543,13 +458,11 @@ static const unsigned armv7_a5_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
 	[C(BPU)] = {
 		[C(OP_READ)] = {
 			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_BRANCH_PRED,
-			[C(RESULT_MISS)]
-					= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
 		},
 		[C(OP_WRITE)] = {
 			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_BRANCH_PRED,
-			[C(RESULT_MISS)]
-					= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
 		},
 		[C(OP_PREFETCH)] = {
 			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
@@ -562,13 +475,15 @@ static const unsigned armv7_a5_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
  * Cortex-A15 HW events mapping
  */
 static const unsigned armv7_a15_perf_map[PERF_COUNT_HW_MAX] = {
-	[PERF_COUNT_HW_CPU_CYCLES]	    = ARMV7_PERFCTR_CPU_CYCLES,
-	[PERF_COUNT_HW_INSTRUCTIONS]	    = ARMV7_PERFCTR_INSTR_EXECUTED,
-	[PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_CACHE_MISSES]	    = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_SPEC_PC_WRITE,
-	[PERF_COUNT_HW_BRANCH_MISSES]	    = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-	[PERF_COUNT_HW_BUS_CYCLES]	    = ARMV7_PERFCTR_BUS_CYCLES,
+	[PERF_COUNT_HW_CPU_CYCLES]		= ARMV7_PERFCTR_CPU_CYCLES,
+	[PERF_COUNT_HW_INSTRUCTIONS]		= ARMV7_PERFCTR_INSTR_EXECUTED,
+	[PERF_COUNT_HW_CACHE_REFERENCES]	= ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+	[PERF_COUNT_HW_CACHE_MISSES]		= ARMV7_PERFCTR_L1_DCACHE_REFILL,
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= ARMV7_A15_PERFCTR_PC_WRITE_SPEC,
+	[PERF_COUNT_HW_BRANCH_MISSES]		= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+	[PERF_COUNT_HW_BUS_CYCLES]		= ARMV7_PERFCTR_BUS_CYCLES,
+	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND]	= HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND]	= HW_OP_UNSUPPORTED,
 };
 
 static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
@@ -576,16 +491,12 @@ static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
 					[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
 	[C(L1D)] = {
 		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]
-					= ARMV7_PERFCTR_L1_DCACHE_READ_ACCESS,
-			[C(RESULT_MISS)]
-					= ARMV7_PERFCTR_L1_DCACHE_READ_REFILL,
+			[C(RESULT_ACCESS)]	= ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_READ,
+			[C(RESULT_MISS)]	= ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_READ,
 		},
 		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]
-					= ARMV7_PERFCTR_L1_DCACHE_WRITE_ACCESS,
-			[C(RESULT_MISS)]
-					= ARMV7_PERFCTR_L1_DCACHE_WRITE_REFILL,
+			[C(RESULT_ACCESS)]	= ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_WRITE,
+			[C(RESULT_MISS)]	= ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_WRITE,
 		},
 		[C(OP_PREFETCH)] = {
 			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
@@ -601,11 +512,11 @@ static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
 		 */
 		[C(OP_READ)] = {
 			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_ICACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_IFETCH_MISS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_ICACHE_REFILL,
 		},
 		[C(OP_WRITE)] = {
 			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_ICACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_IFETCH_MISS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_ICACHE_REFILL,
 		},
 		[C(OP_PREFETCH)] = {
 			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
@@ -614,16 +525,12 @@ static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
 	},
 	[C(LL)] = {
 		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]
-					= ARMV7_PERFCTR_L2_DCACHE_READ_ACCESS,
-			[C(RESULT_MISS)]
-					= ARMV7_PERFCTR_L2_DCACHE_READ_REFILL,
+			[C(RESULT_ACCESS)]	= ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_READ,
+			[C(RESULT_MISS)]	= ARMV7_A15_PERFCTR_L2_CACHE_REFILL_READ,
 		},
 		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]
-					= ARMV7_PERFCTR_L2_DCACHE_WRITE_ACCESS,
-			[C(RESULT_MISS)]
-					= ARMV7_PERFCTR_L2_DCACHE_WRITE_REFILL,
+			[C(RESULT_ACCESS)]	= ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_WRITE,
+			[C(RESULT_MISS)]	= ARMV7_A15_PERFCTR_L2_CACHE_REFILL_WRITE,
 		},
 		[C(OP_PREFETCH)] = {
 			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
@@ -633,13 +540,11 @@ static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
 	[C(DTLB)] = {
 		[C(OP_READ)] = {
 			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]
-					= ARMV7_PERFCTR_L1_DTLB_READ_REFILL,
+			[C(RESULT_MISS)]	= ARMV7_A15_PERFCTR_DTLB_REFILL_L1_READ,
 		},
 		[C(OP_WRITE)] = {
 			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]
-					= ARMV7_PERFCTR_L1_DTLB_WRITE_REFILL,
+			[C(RESULT_MISS)]	= ARMV7_A15_PERFCTR_DTLB_REFILL_L1_WRITE,
 		},
 		[C(OP_PREFETCH)] = {
 			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
@@ -649,11 +554,11 @@ static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
 	[C(ITLB)] = {
 		[C(OP_READ)] = {
 			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_MISS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_REFILL,
 		},
 		[C(OP_WRITE)] = {
 			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_MISS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_REFILL,
 		},
 		[C(OP_PREFETCH)] = {
 			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
@@ -663,13 +568,11 @@ static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
 	[C(BPU)] = {
 		[C(OP_READ)] = {
 			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_BRANCH_PRED,
-			[C(RESULT_MISS)]
-					= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
 		},
 		[C(OP_WRITE)] = {
 			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_BRANCH_PRED,
-			[C(RESULT_MISS)]
-					= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
 		},
 		[C(OP_PREFETCH)] = {
 			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c
index e0cca10..3b99d82 100644
--- a/arch/arm/kernel/perf_event_xscale.c
+++ b/arch/arm/kernel/perf_event_xscale.c
@@ -48,13 +48,15 @@ enum xscale_counters {
 };
 
 static const unsigned xscale_perf_map[PERF_COUNT_HW_MAX] = {
-	[PERF_COUNT_HW_CPU_CYCLES]	    = XSCALE_PERFCTR_CCNT,
-	[PERF_COUNT_HW_INSTRUCTIONS]	    = XSCALE_PERFCTR_INSTRUCTION,
-	[PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_CACHE_MISSES]	    = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = XSCALE_PERFCTR_BRANCH,
-	[PERF_COUNT_HW_BRANCH_MISSES]	    = XSCALE_PERFCTR_BRANCH_MISS,
-	[PERF_COUNT_HW_BUS_CYCLES]	    = HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_CPU_CYCLES]		= XSCALE_PERFCTR_CCNT,
+	[PERF_COUNT_HW_INSTRUCTIONS]		= XSCALE_PERFCTR_INSTRUCTION,
+	[PERF_COUNT_HW_CACHE_REFERENCES]	= HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_CACHE_MISSES]		= HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= XSCALE_PERFCTR_BRANCH,
+	[PERF_COUNT_HW_BRANCH_MISSES]		= XSCALE_PERFCTR_BRANCH_MISS,
+	[PERF_COUNT_HW_BUS_CYCLES]		= HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND]	= XSCALE_PERFCTR_ICACHE_NO_DELIVER,
+	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND]	= HW_OP_UNSUPPORTED,
 };
 
 static const unsigned xscale_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
diff --git a/arch/arm/kernel/pmu.c b/arch/arm/kernel/pmu.c
index 2c3407e..2334bf8 100644
--- a/arch/arm/kernel/pmu.c
+++ b/arch/arm/kernel/pmu.c
@@ -33,3 +33,4 @@ release_pmu(enum arm_pmu_type type)
 {
 	clear_bit_unlock(type, pmu_lock);
 }
+EXPORT_SYMBOL_GPL(release_pmu);
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 75316f0..971d65c 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -57,7 +57,7 @@ static const char *isa_modes[] = {
   "ARM" , "Thumb" , "Jazelle", "ThumbEE"
 };
 
-extern void setup_mm_for_reboot(char mode);
+extern void setup_mm_for_reboot(void);
 
 static volatile int hlt_counter;
 
@@ -92,18 +92,24 @@ static int __init hlt_setup(char *__unused)
 __setup("nohlt", nohlt_setup);
 __setup("hlt", hlt_setup);
 
-void arm_machine_restart(char mode, const char *cmd)
+extern void call_with_stack(void (*fn)(void *), void *arg, void *sp);
+typedef void (*phys_reset_t)(unsigned long);
+
+/*
+ * A temporary stack to use for CPU reset. This is static so that we
+ * don't clobber it with the identity mapping. When running with this
+ * stack, any references to the current task *will not work* so you
+ * should really do as little as possible before jumping to your reset
+ * code.
+ */
+static u64 soft_restart_stack[16];
+
+static void __soft_restart(void *addr)
 {
-	/* Disable interrupts first */
-	local_irq_disable();
-	local_fiq_disable();
+	phys_reset_t phys_reset;
 
-	/*
-	 * Tell the mm system that we are going to reboot -
-	 * we may need it to insert some 1:1 mappings so that
-	 * soft boot works.
-	 */
-	setup_mm_for_reboot(mode);
+	/* Take out a flat memory mapping. */
+	setup_mm_for_reboot();
 
 	/* Clean and invalidate caches */
 	flush_cache_all();
@@ -114,18 +120,35 @@ void arm_machine_restart(char mode, const char *cmd)
 	/* Push out any further dirty data, and ensure cache is empty */
 	flush_cache_all();
 
-	/*
-	 * Now call the architecture specific reboot code.
-	 */
-	arch_reset(mode, cmd);
+	/* Switch to the identity mapping. */
+	phys_reset = (phys_reset_t)(unsigned long)virt_to_phys(cpu_reset);
+	phys_reset((unsigned long)addr);
 
-	/*
-	 * Whoops - the architecture was unable to reboot.
-	 * Tell the user!
-	 */
-	mdelay(1000);
-	printk("Reboot failed -- System halted\n");
-	while (1);
+	/* Should never get here. */
+	BUG();
+}
+
+void soft_restart(unsigned long addr)
+{
+	u64 *stack = soft_restart_stack + ARRAY_SIZE(soft_restart_stack);
+
+	/* Disable interrupts first */
+	local_irq_disable();
+	local_fiq_disable();
+
+	/* Disable the L2 if we're the last man standing. */
+	if (num_online_cpus() == 1)
+		outer_disable();
+
+	/* Change to the new stack and continue with the reset. */
+	call_with_stack(__soft_restart, (void *)addr, (void *)stack);
+
+	/* Should never get here. */
+	BUG();
+}
+
+static void null_restart(char mode, const char *cmd)
+{
 }
 
 /*
@@ -134,7 +157,7 @@ void arm_machine_restart(char mode, const char *cmd)
 void (*pm_power_off)(void);
 EXPORT_SYMBOL(pm_power_off);
 
-void (*arm_pm_restart)(char str, const char *cmd) = arm_machine_restart;
+void (*arm_pm_restart)(char str, const char *cmd) = null_restart;
 EXPORT_SYMBOL_GPL(arm_pm_restart);
 
 static void do_nothing(void *unused)
@@ -183,7 +206,8 @@ void cpu_idle(void)
 
 	/* endless idle loop with no priority at all */
 	while (1) {
-		tick_nohz_stop_sched_tick(1);
+		tick_nohz_idle_enter();
+		rcu_idle_enter();
 		leds_event(led_idle_start);
 		while (!need_resched()) {
 #ifdef CONFIG_HOTPLUG_CPU
@@ -192,6 +216,9 @@ void cpu_idle(void)
 #endif
 
 			local_irq_disable();
+#ifdef CONFIG_PL310_ERRATA_769419
+			wmb();
+#endif
 			if (hlt_counter) {
 				local_irq_enable();
 				cpu_relax();
@@ -210,7 +237,8 @@ void cpu_idle(void)
 			}
 		}
 		leds_event(led_idle_end);
-		tick_nohz_restart_sched_tick();
+		rcu_idle_exit();
+		tick_nohz_idle_exit();
 		preempt_enable_no_resched();
 		schedule();
 		preempt_disable();
@@ -250,7 +278,15 @@ void machine_power_off(void)
 void machine_restart(char *cmd)
 {
 	machine_shutdown();
+
 	arm_pm_restart(reboot_mode, cmd);
+
+	/* Give a grace period for failure to restart of 1s */
+	mdelay(1000);
+
+	/* Whoops - the platform was unable to reboot. Tell the user! */
+	printk("Reboot failed -- System halted\n");
+	while (1);
 }
 
 void __show_regs(struct pt_regs *regs)
diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c
index 9a46370..5416c7c 100644
--- a/arch/arm/kernel/sched_clock.c
+++ b/arch/arm/kernel/sched_clock.c
@@ -14,61 +14,153 @@
 
 #include <asm/sched_clock.h>
 
+struct clock_data {
+	u64 epoch_ns;
+	u32 epoch_cyc;
+	u32 epoch_cyc_copy;
+	u32 mult;
+	u32 shift;
+};
+
 static void sched_clock_poll(unsigned long wrap_ticks);
 static DEFINE_TIMER(sched_clock_timer, sched_clock_poll, 0, 0);
-static void (*sched_clock_update_fn)(void);
+
+static struct clock_data cd = {
+	.mult	= NSEC_PER_SEC / HZ,
+};
+
+static u32 __read_mostly sched_clock_mask = 0xffffffff;
+
+static u32 notrace jiffy_sched_clock_read(void)
+{
+	return (u32)(jiffies - INITIAL_JIFFIES);
+}
+
+static u32 __read_mostly (*read_sched_clock)(void) = jiffy_sched_clock_read;
+
+static inline u64 cyc_to_ns(u64 cyc, u32 mult, u32 shift)
+{
+	return (cyc * mult) >> shift;
+}
+
+static unsigned long long cyc_to_sched_clock(u32 cyc, u32 mask)
+{
+	u64 epoch_ns;
+	u32 epoch_cyc;
+
+	/*
+	 * Load the epoch_cyc and epoch_ns atomically.  We do this by
+	 * ensuring that we always write epoch_cyc, epoch_ns and
+	 * epoch_cyc_copy in strict order, and read them in strict order.
+	 * If epoch_cyc and epoch_cyc_copy are not equal, then we're in
+	 * the middle of an update, and we should repeat the load.
+	 */
+	do {
+		epoch_cyc = cd.epoch_cyc;
+		smp_rmb();
+		epoch_ns = cd.epoch_ns;
+		smp_rmb();
+	} while (epoch_cyc != cd.epoch_cyc_copy);
+
+	return epoch_ns + cyc_to_ns((cyc - epoch_cyc) & mask, cd.mult, cd.shift);
+}
+
+/*
+ * Atomically update the sched_clock epoch.
+ */
+static void notrace update_sched_clock(void)
+{
+	unsigned long flags;
+	u32 cyc;
+	u64 ns;
+
+	cyc = read_sched_clock();
+	ns = cd.epoch_ns +
+		cyc_to_ns((cyc - cd.epoch_cyc) & sched_clock_mask,
+			  cd.mult, cd.shift);
+	/*
+	 * Write epoch_cyc and epoch_ns in a way that the update is
+	 * detectable in cyc_to_fixed_sched_clock().
+	 */
+	raw_local_irq_save(flags);
+	cd.epoch_cyc = cyc;
+	smp_wmb();
+	cd.epoch_ns = ns;
+	smp_wmb();
+	cd.epoch_cyc_copy = cyc;
+	raw_local_irq_restore(flags);
+}
 
 static void sched_clock_poll(unsigned long wrap_ticks)
 {
 	mod_timer(&sched_clock_timer, round_jiffies(jiffies + wrap_ticks));
-	sched_clock_update_fn();
+	update_sched_clock();
 }
 
-void __init init_sched_clock(struct clock_data *cd, void (*update)(void),
-	unsigned int clock_bits, unsigned long rate)
+void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate)
 {
 	unsigned long r, w;
 	u64 res, wrap;
 	char r_unit;
 
-	sched_clock_update_fn = update;
+	BUG_ON(bits > 32);
+	WARN_ON(!irqs_disabled());
+	WARN_ON(read_sched_clock != jiffy_sched_clock_read);
+	read_sched_clock = read;
+	sched_clock_mask = (1 << bits) - 1;
 
 	/* calculate the mult/shift to convert counter ticks to ns. */
-	clocks_calc_mult_shift(&cd->mult, &cd->shift, rate, NSEC_PER_SEC, 0);
+	clocks_calc_mult_shift(&cd.mult, &cd.shift, rate, NSEC_PER_SEC, 0);
 
 	r = rate;
 	if (r >= 4000000) {
 		r /= 1000000;
 		r_unit = 'M';
-	} else {
+	} else if (r >= 1000) {
 		r /= 1000;
 		r_unit = 'k';
-	}
+	} else
+		r_unit = ' ';
 
 	/* calculate how many ns until we wrap */
-	wrap = cyc_to_ns((1ULL << clock_bits) - 1, cd->mult, cd->shift);
+	wrap = cyc_to_ns((1ULL << bits) - 1, cd.mult, cd.shift);
 	do_div(wrap, NSEC_PER_MSEC);
 	w = wrap;
 
 	/* calculate the ns resolution of this counter */
-	res = cyc_to_ns(1ULL, cd->mult, cd->shift);
+	res = cyc_to_ns(1ULL, cd.mult, cd.shift);
 	pr_info("sched_clock: %u bits at %lu%cHz, resolution %lluns, wraps every %lums\n",
-		clock_bits, r, r_unit, res, w);
+		bits, r, r_unit, res, w);
 
 	/*
 	 * Start the timer to keep sched_clock() properly updated and
 	 * sets the initial epoch.
 	 */
 	sched_clock_timer.data = msecs_to_jiffies(w - (w / 10));
-	update();
+	update_sched_clock();
 
 	/*
 	 * Ensure that sched_clock() starts off at 0ns
 	 */
-	cd->epoch_ns = 0;
+	cd.epoch_ns = 0;
+
+	pr_debug("Registered %pF as sched_clock source\n", read);
+}
+
+unsigned long long notrace sched_clock(void)
+{
+	u32 cyc = read_sched_clock();
+	return cyc_to_sched_clock(cyc, sched_clock_mask);
 }
 
 void __init sched_clock_postinit(void)
 {
+	/*
+	 * If no sched_clock function has been provided at that point,
+	 * make it the final one one.
+	 */
+	if (read_sched_clock == jiffy_sched_clock_read)
+		setup_sched_clock(jiffy_sched_clock_read, 32, HZ);
+
 	sched_clock_poll(sched_clock_timer.data);
 }
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 3448a3f..129fbd5 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -31,6 +31,7 @@
 #include <linux/memblock.h>
 #include <linux/bug.h>
 #include <linux/compiler.h>
+#include <linux/sort.h>
 
 #include <asm/unified.h>
 #include <asm/cpu.h>
@@ -52,6 +53,7 @@
 #include <asm/mach/time.h>
 #include <asm/traps.h>
 #include <asm/unwind.h>
+#include <asm/memblock.h>
 
 #if defined(CONFIG_DEPRECATED_PARAM_STRUCT)
 #include "compat.h"
@@ -890,13 +892,17 @@ static struct machine_desc * __init setup_machine_tags(unsigned int nr)
 	return mdesc;
 }
 
+static int __init meminfo_cmp(const void *_a, const void *_b)
+{
+	const struct membank *a = _a, *b = _b;
+	long cmp = bank_pfn_start(a) - bank_pfn_start(b);
+	return cmp < 0 ? -1 : cmp > 0 ? 1 : 0;
+}
 
 void __init setup_arch(char **cmdline_p)
 {
 	struct machine_desc *mdesc;
 
-	unwind_init();
-
 	setup_processor();
 	mdesc = setup_machine_fdt(__atags_pointer);
 	if (!mdesc)
@@ -904,8 +910,14 @@ void __init setup_arch(char **cmdline_p)
 	machine_desc = mdesc;
 	machine_name = mdesc->name;
 
-	if (mdesc->soft_reboot)
-		reboot_setup("s");
+#ifdef CONFIG_ZONE_DMA
+	if (mdesc->dma_zone_size) {
+		extern unsigned long arm_dma_zone_size;
+		arm_dma_zone_size = mdesc->dma_zone_size;
+	}
+#endif
+	if (mdesc->restart_mode)
+		reboot_setup(&mdesc->restart_mode);
 
 	init_mm.start_code = (unsigned long) _text;
 	init_mm.end_code   = (unsigned long) _etext;
@@ -918,12 +930,16 @@ void __init setup_arch(char **cmdline_p)
 
 	parse_early_param();
 
+	sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]), meminfo_cmp, NULL);
 	sanity_check_meminfo();
 	arm_memblock_init(&meminfo, mdesc);
 
 	paging_init(mdesc);
 	request_standard_resources(mdesc);
 
+	if (mdesc->restart)
+		arm_pm_restart = mdesc->restart;
+
 	unflatten_device_tree();
 
 #ifdef CONFIG_SMP
@@ -934,12 +950,6 @@ void __init setup_arch(char **cmdline_p)
 
 	tcm_init();
 
-#ifdef CONFIG_ZONE_DMA
-	if (mdesc->dma_zone_size) {
-		extern unsigned long arm_dma_zone_size;
-		arm_dma_zone_size = mdesc->dma_zone_size;
-	}
-#endif
 #ifdef CONFIG_MULTI_IRQ_HANDLER
 	handle_arch_irq = mdesc->handle_irq;
 #endif
diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S
index 020e99c..1f268bd 100644
--- a/arch/arm/kernel/sleep.S
+++ b/arch/arm/kernel/sleep.S
@@ -54,14 +54,18 @@ ENDPROC(cpu_suspend_abort)
  * r0 = control register value
  */
 	.align	5
+	.pushsection	.idmap.text,"ax"
 ENTRY(cpu_resume_mmu)
 	ldr	r3, =cpu_resume_after_mmu
+	instr_sync
 	mcr	p15, 0, r0, c1, c0, 0	@ turn on MMU, I-cache, etc
 	mrc	p15, 0, r0, c0, c0, 0	@ read id reg
+	instr_sync
 	mov	r0, r0
 	mov	r0, r0
 	mov	pc, r3			@ jump to virtual address
 ENDPROC(cpu_resume_mmu)
+	.popsection
 cpu_resume_after_mmu:
 	bl	cpu_init		@ restore the und/abt/irq banked regs
 	mov	r0, #0			@ return zero on success
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index ef5640b..57db122 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -31,6 +31,7 @@
 #include <asm/cpu.h>
 #include <asm/cputype.h>
 #include <asm/exception.h>
+#include <asm/idmap.h>
 #include <asm/topology.h>
 #include <asm/mmu_context.h>
 #include <asm/pgtable.h>
@@ -61,7 +62,6 @@ int __cpuinit __cpu_up(unsigned int cpu)
 {
 	struct cpuinfo_arm *ci = &per_cpu(cpu_data, cpu);
 	struct task_struct *idle = ci->idle;
-	pgd_t *pgd;
 	int ret;
 
 	/*
@@ -84,29 +84,11 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	}
 
 	/*
-	 * Allocate initial page tables to allow the new CPU to
-	 * enable the MMU safely.  This essentially means a set
-	 * of our "standard" page tables, with the addition of
-	 * a 1:1 mapping for the physical address of the kernel.
-	 */
-	pgd = pgd_alloc(&init_mm);
-	if (!pgd)
-		return -ENOMEM;
-
-	if (PHYS_OFFSET != PAGE_OFFSET) {
-#ifndef CONFIG_HOTPLUG_CPU
-		identity_mapping_add(pgd, __pa(__init_begin), __pa(__init_end));
-#endif
-		identity_mapping_add(pgd, __pa(_stext), __pa(_etext));
-		identity_mapping_add(pgd, __pa(_sdata), __pa(_edata));
-	}
-
-	/*
 	 * We need to tell the secondary core where to find
 	 * its stack and the page tables.
 	 */
 	secondary_data.stack = task_stack_page(idle) + THREAD_START_SP;
-	secondary_data.pgdir = virt_to_phys(pgd);
+	secondary_data.pgdir = virt_to_phys(idmap_pgd);
 	secondary_data.swapper_pg_dir = virt_to_phys(swapper_pg_dir);
 	__cpuc_flush_dcache_area(&secondary_data, sizeof(secondary_data));
 	outer_clean_range(__pa(&secondary_data), __pa(&secondary_data + 1));
@@ -142,16 +124,6 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	secondary_data.stack = NULL;
 	secondary_data.pgdir = 0;
 
-	if (PHYS_OFFSET != PAGE_OFFSET) {
-#ifndef CONFIG_HOTPLUG_CPU
-		identity_mapping_del(pgd, __pa(__init_begin), __pa(__init_end));
-#endif
-		identity_mapping_del(pgd, __pa(_stext), __pa(_etext));
-		identity_mapping_del(pgd, __pa(_sdata), __pa(_edata));
-	}
-
-	pgd_free(&init_mm, pgd);
-
 	return ret;
 }
 
@@ -550,6 +522,10 @@ static void ipi_cpu_stop(unsigned int cpu)
 	local_fiq_disable();
 	local_irq_disable();
 
+#ifdef CONFIG_HOTPLUG_CPU
+	platform_cpu_kill(cpu);
+#endif
+
 	while (1)
 		cpu_relax();
 }
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index a8a6682..c8e9385 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -10,8 +10,11 @@
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/cpufreq.h>
 #include <linux/delay.h>
 #include <linux/device.h>
+#include <linux/err.h>
 #include <linux/smp.h>
 #include <linux/jiffies.h>
 #include <linux/clockchips.h>
@@ -25,6 +28,7 @@
 /* set up by the platform code */
 void __iomem *twd_base;
 
+static struct clk *twd_clk;
 static unsigned long twd_timer_rate;
 
 static struct clock_event_device __percpu **twd_evt;
@@ -89,6 +93,52 @@ void twd_timer_stop(struct clock_event_device *clk)
 	disable_percpu_irq(clk->irq);
 }
 
+#ifdef CONFIG_CPU_FREQ
+
+/*
+ * Updates clockevent frequency when the cpu frequency changes.
+ * Called on the cpu that is changing frequency with interrupts disabled.
+ */
+static void twd_update_frequency(void *data)
+{
+	twd_timer_rate = clk_get_rate(twd_clk);
+
+	clockevents_update_freq(*__this_cpu_ptr(twd_evt), twd_timer_rate);
+}
+
+static int twd_cpufreq_transition(struct notifier_block *nb,
+	unsigned long state, void *data)
+{
+	struct cpufreq_freqs *freqs = data;
+
+	/*
+	 * The twd clock events must be reprogrammed to account for the new
+	 * frequency.  The timer is local to a cpu, so cross-call to the
+	 * changing cpu.
+	 */
+	if (state == CPUFREQ_POSTCHANGE || state == CPUFREQ_RESUMECHANGE)
+		smp_call_function_single(freqs->cpu, twd_update_frequency,
+			NULL, 1);
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block twd_cpufreq_nb = {
+	.notifier_call = twd_cpufreq_transition,
+};
+
+static int twd_cpufreq_init(void)
+{
+	if (!IS_ERR(twd_clk))
+		return cpufreq_register_notifier(&twd_cpufreq_nb,
+			CPUFREQ_TRANSITION_NOTIFIER);
+
+	return 0;
+}
+core_initcall(twd_cpufreq_init);
+
+#endif
+
 static void __cpuinit twd_calibrate_rate(void)
 {
 	unsigned long count;
@@ -140,6 +190,35 @@ static irqreturn_t twd_handler(int irq, void *dev_id)
 	return IRQ_NONE;
 }
 
+static struct clk *twd_get_clock(void)
+{
+	struct clk *clk;
+	int err;
+
+	clk = clk_get_sys("smp_twd", NULL);
+	if (IS_ERR(clk)) {
+		pr_err("smp_twd: clock not found: %d\n", (int)PTR_ERR(clk));
+		return clk;
+	}
+
+	err = clk_prepare(clk);
+	if (err) {
+		pr_err("smp_twd: clock failed to prepare: %d\n", err);
+		clk_put(clk);
+		return ERR_PTR(err);
+	}
+
+	err = clk_enable(clk);
+	if (err) {
+		pr_err("smp_twd: clock failed to enable: %d\n", err);
+		clk_unprepare(clk);
+		clk_put(clk);
+		return ERR_PTR(err);
+	}
+
+	return clk;
+}
+
 /*
  * Setup the local clock events for a CPU.
  */
@@ -165,7 +244,13 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk)
 		}
 	}
 
-	twd_calibrate_rate();
+	if (!twd_clk)
+		twd_clk = twd_get_clock();
+
+	if (!IS_ERR_OR_NULL(twd_clk))
+		twd_timer_rate = clk_get_rate(twd_clk);
+	else
+		twd_calibrate_rate();
 
 	clk->name = "local_timer";
 	clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT |
@@ -173,15 +258,11 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk)
 	clk->rating = 350;
 	clk->set_mode = twd_set_mode;
 	clk->set_next_event = twd_set_next_event;
-	clk->shift = 20;
-	clk->mult = div_sc(twd_timer_rate, NSEC_PER_SEC, clk->shift);
-	clk->max_delta_ns = clockevent_delta2ns(0xffffffff, clk);
-	clk->min_delta_ns = clockevent_delta2ns(0xf, clk);
 
 	this_cpu_clk = __this_cpu_ptr(twd_evt);
 	*this_cpu_clk = clk;
 
-	clockevents_register_device(clk);
-
+	clockevents_config_and_register(clk, twd_timer_rate,
+					0xf, 0xffffffff);
 	enable_percpu_irq(clk->irq, 0);
 }
diff --git a/arch/arm/kernel/suspend.c b/arch/arm/kernel/suspend.c
index 93a22d2..1794cc3 100644
--- a/arch/arm/kernel/suspend.c
+++ b/arch/arm/kernel/suspend.c
@@ -1,13 +1,12 @@
 #include <linux/init.h>
 
+#include <asm/idmap.h>
 #include <asm/pgalloc.h>
 #include <asm/pgtable.h>
 #include <asm/memory.h>
 #include <asm/suspend.h>
 #include <asm/tlbflush.h>
 
-static pgd_t *suspend_pgd;
-
 extern int __cpu_suspend(unsigned long, int (*)(unsigned long));
 extern void cpu_resume_mmu(void);
 
@@ -21,7 +20,7 @@ void __cpu_suspend_save(u32 *ptr, u32 ptrsz, u32 sp, u32 *save_ptr)
 	*save_ptr = virt_to_phys(ptr);
 
 	/* This must correspond to the LDM in cpu_resume() assembly */
-	*ptr++ = virt_to_phys(suspend_pgd);
+	*ptr++ = virt_to_phys(idmap_pgd);
 	*ptr++ = sp;
 	*ptr++ = virt_to_phys(cpu_do_resume);
 
@@ -42,7 +41,7 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
 	struct mm_struct *mm = current->active_mm;
 	int ret;
 
-	if (!suspend_pgd)
+	if (!idmap_pgd)
 		return -EINVAL;
 
 	/*
@@ -59,14 +58,3 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
 
 	return ret;
 }
-
-static int __init cpu_suspend_init(void)
-{
-	suspend_pgd = pgd_alloc(&init_mm);
-	if (suspend_pgd) {
-		unsigned long addr = virt_to_phys(cpu_resume_mmu);
-		identity_mapping_add(suspend_pgd, addr, addr + SECTION_SIZE);
-	}
-	return suspend_pgd ? 0 : -ENOMEM;
-}
-core_initcall(cpu_suspend_init);
diff --git a/arch/arm/kernel/swp_emulate.c b/arch/arm/kernel/swp_emulate.c
index 5f452f8..df74518 100644
--- a/arch/arm/kernel/swp_emulate.c
+++ b/arch/arm/kernel/swp_emulate.c
@@ -25,6 +25,7 @@
 #include <linux/syscalls.h>
 #include <linux/perf_event.h>
 
+#include <asm/opcodes.h>
 #include <asm/traps.h>
 #include <asm/uaccess.h>
 
@@ -185,6 +186,21 @@ static int swp_handler(struct pt_regs *regs, unsigned int instr)
 
 	perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, regs->ARM_pc);
 
+	res = arm_check_condition(instr, regs->ARM_cpsr);
+	switch (res) {
+	case ARM_OPCODE_CONDTEST_PASS:
+		break;
+	case ARM_OPCODE_CONDTEST_FAIL:
+		/* Condition failed - return to next instruction */
+		regs->ARM_pc += 4;
+		return 0;
+	case ARM_OPCODE_CONDTEST_UNCOND:
+		/* If unconditional encoding - not a SWP, undef */
+		return -EFAULT;
+	default:
+		return -EINVAL;
+	}
+
 	if (current->pid != previous_pid) {
 		pr_debug("\"%s\" (%ld) uses deprecated SWP{B} instruction\n",
 			 current->comm, (unsigned long)current->pid);
diff --git a/arch/arm/kernel/tcm.c b/arch/arm/kernel/tcm.c
index 30e302d..01ec453 100644
--- a/arch/arm/kernel/tcm.c
+++ b/arch/arm/kernel/tcm.c
@@ -180,9 +180,9 @@ static int __init setup_tcm_bank(u8 type, u8 bank, u8 banks,
  */
 void __init tcm_init(void)
 {
-	u32 tcm_status = read_cpuid_tcmstatus();
-	u8 dtcm_banks = (tcm_status >> 16) & 0x03;
-	u8 itcm_banks = (tcm_status & 0x03);
+	u32 tcm_status;
+	u8 dtcm_banks;
+	u8 itcm_banks;
 	size_t dtcm_code_sz = &__edtcm_data - &__sdtcm_data;
 	size_t itcm_code_sz = &__eitcm_text - &__sitcm_text;
 	char *start;
@@ -191,6 +191,22 @@ void __init tcm_init(void)
 	int ret;
 	int i;
 
+	/*
+	 * Prior to ARMv5 there is no TCM, and trying to read the status
+	 * register will hang the processor.
+	 */
+	if (cpu_architecture() < CPU_ARCH_ARMv5) {
+		if (dtcm_code_sz || itcm_code_sz)
+			pr_info("CPU TCM: %u bytes of DTCM and %u bytes of "
+				"ITCM code compiled in, but no TCM present "
+				"in pre-v5 CPU\n", dtcm_code_sz, itcm_code_sz);
+		return;
+	}
+
+	tcm_status = read_cpuid_tcmstatus();
+	dtcm_banks = (tcm_status >> 16) & 0x03;
+	itcm_banks = (tcm_status & 0x03);
+
 	/* Values greater than 2 for D/ITCM banks are "reserved" */
 	if (dtcm_banks > 2)
 		dtcm_banks = 0;
diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c
index 1040c00..8200dea 100644
--- a/arch/arm/kernel/topology.c
+++ b/arch/arm/kernel/topology.c
@@ -43,7 +43,7 @@
 
 struct cputopo_arm cpu_topology[NR_CPUS];
 
-const struct cpumask *cpu_coregroup_mask(unsigned int cpu)
+const struct cpumask *cpu_coregroup_mask(int cpu)
 {
 	return &cpu_topology[cpu].core_sibling;
 }
diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c
index e7e8365..00df012 100644
--- a/arch/arm/kernel/unwind.c
+++ b/arch/arm/kernel/unwind.c
@@ -67,7 +67,7 @@ EXPORT_SYMBOL(__aeabi_unwind_cpp_pr2);
 
 struct unwind_ctrl_block {
 	unsigned long vrs[16];		/* virtual register set */
-	unsigned long *insn;		/* pointer to the current instructions word */
+	const unsigned long *insn;	/* pointer to the current instructions word */
 	int entries;			/* number of entries left to interpret */
 	int byte;			/* current byte number in the instructions word */
 };
@@ -83,8 +83,9 @@ enum regs {
 	PC = 15
 };
 
-extern struct unwind_idx __start_unwind_idx[];
-extern struct unwind_idx __stop_unwind_idx[];
+extern const struct unwind_idx __start_unwind_idx[];
+static const struct unwind_idx *__origin_unwind_idx;
+extern const struct unwind_idx __stop_unwind_idx[];
 
 static DEFINE_SPINLOCK(unwind_lock);
 static LIST_HEAD(unwind_tables);
@@ -98,45 +99,99 @@ static LIST_HEAD(unwind_tables);
 })
 
 /*
- * Binary search in the unwind index. The entries entries are
+ * Binary search in the unwind index. The entries are
  * guaranteed to be sorted in ascending order by the linker.
+ *
+ * start = first entry
+ * origin = first entry with positive offset (or stop if there is no such entry)
+ * stop - 1 = last entry
  */
-static struct unwind_idx *search_index(unsigned long addr,
-				       struct unwind_idx *first,
-				       struct unwind_idx *last)
+static const struct unwind_idx *search_index(unsigned long addr,
+				       const struct unwind_idx *start,
+				       const struct unwind_idx *origin,
+				       const struct unwind_idx *stop)
 {
-	pr_debug("%s(%08lx, %p, %p)\n", __func__, addr, first, last);
+	unsigned long addr_prel31;
+
+	pr_debug("%s(%08lx, %p, %p, %p)\n",
+			__func__, addr, start, origin, stop);
+
+	/*
+	 * only search in the section with the matching sign. This way the
+	 * prel31 numbers can be compared as unsigned longs.
+	 */
+	if (addr < (unsigned long)start)
+		/* negative offsets: [start; origin) */
+		stop = origin;
+	else
+		/* positive offsets: [origin; stop) */
+		start = origin;
+
+	/* prel31 for address relavive to start */
+	addr_prel31 = (addr - (unsigned long)start) & 0x7fffffff;
 
-	if (addr < first->addr) {
+	while (start < stop - 1) {
+		const struct unwind_idx *mid = start + ((stop - start) >> 1);
+
+		/*
+		 * As addr_prel31 is relative to start an offset is needed to
+		 * make it relative to mid.
+		 */
+		if (addr_prel31 - ((unsigned long)mid - (unsigned long)start) <
+				mid->addr_offset)
+			stop = mid;
+		else {
+			/* keep addr_prel31 relative to start */
+			addr_prel31 -= ((unsigned long)mid -
+					(unsigned long)start);
+			start = mid;
+		}
+	}
+
+	if (likely(start->addr_offset <= addr_prel31))
+		return start;
+	else {
 		pr_warning("unwind: Unknown symbol address %08lx\n", addr);
 		return NULL;
-	} else if (addr >= last->addr)
-		return last;
+	}
+}
 
-	while (first < last - 1) {
-		struct unwind_idx *mid = first + ((last - first + 1) >> 1);
+static const struct unwind_idx *unwind_find_origin(
+		const struct unwind_idx *start, const struct unwind_idx *stop)
+{
+	pr_debug("%s(%p, %p)\n", __func__, start, stop);
+	while (start < stop) {
+		const struct unwind_idx *mid = start + ((stop - start) >> 1);
 
-		if (addr < mid->addr)
-			last = mid;
+		if (mid->addr_offset >= 0x40000000)
+			/* negative offset */
+			start = mid + 1;
 		else
-			first = mid;
+			/* positive offset */
+			stop = mid;
 	}
-
-	return first;
+	pr_debug("%s -> %p\n", __func__, stop);
+	return stop;
 }
 
-static struct unwind_idx *unwind_find_idx(unsigned long addr)
+static const struct unwind_idx *unwind_find_idx(unsigned long addr)
 {
-	struct unwind_idx *idx = NULL;
+	const struct unwind_idx *idx = NULL;
 	unsigned long flags;
 
 	pr_debug("%s(%08lx)\n", __func__, addr);
 
-	if (core_kernel_text(addr))
+	if (core_kernel_text(addr)) {
+		if (unlikely(!__origin_unwind_idx))
+			__origin_unwind_idx =
+				unwind_find_origin(__start_unwind_idx,
+						__stop_unwind_idx);
+
 		/* main unwind table */
 		idx = search_index(addr, __start_unwind_idx,
-				   __stop_unwind_idx - 1);
-	else {
+				   __origin_unwind_idx,
+				   __stop_unwind_idx);
+	} else {
 		/* module unwind tables */
 		struct unwind_table *table;
 
@@ -145,7 +200,8 @@ static struct unwind_idx *unwind_find_idx(unsigned long addr)
 			if (addr >= table->begin_addr &&
 			    addr < table->end_addr) {
 				idx = search_index(addr, table->start,
-						   table->stop - 1);
+						   table->origin,
+						   table->stop);
 				/* Move-to-front to exploit common traces */
 				list_move(&table->list, &unwind_tables);
 				break;
@@ -274,7 +330,7 @@ static int unwind_exec_insn(struct unwind_ctrl_block *ctrl)
 int unwind_frame(struct stackframe *frame)
 {
 	unsigned long high, low;
-	struct unwind_idx *idx;
+	const struct unwind_idx *idx;
 	struct unwind_ctrl_block ctrl;
 
 	/* only go to a higher address on the stack */
@@ -399,7 +455,6 @@ struct unwind_table *unwind_table_add(unsigned long start, unsigned long size,
 				      unsigned long text_size)
 {
 	unsigned long flags;
-	struct unwind_idx *idx;
 	struct unwind_table *tab = kmalloc(sizeof(*tab), GFP_KERNEL);
 
 	pr_debug("%s(%08lx, %08lx, %08lx, %08lx)\n", __func__, start, size,
@@ -408,15 +463,12 @@ struct unwind_table *unwind_table_add(unsigned long start, unsigned long size,
 	if (!tab)
 		return tab;
 
-	tab->start = (struct unwind_idx *)start;
-	tab->stop = (struct unwind_idx *)(start + size);
+	tab->start = (const struct unwind_idx *)start;
+	tab->stop = (const struct unwind_idx *)(start + size);
+	tab->origin = unwind_find_origin(tab->start, tab->stop);
 	tab->begin_addr = text_addr;
 	tab->end_addr = text_addr + text_size;
 
-	/* Convert the symbol addresses to absolute values */
-	for (idx = tab->start; idx < tab->stop; idx++)
-		idx->addr = prel31_to_addr(&idx->addr);
-
 	spin_lock_irqsave(&unwind_lock, flags);
 	list_add_tail(&tab->list, &unwind_tables);
 	spin_unlock_irqrestore(&unwind_lock, flags);
@@ -437,16 +489,3 @@ void unwind_table_del(struct unwind_table *tab)
 
 	kfree(tab);
 }
-
-int __init unwind_init(void)
-{
-	struct unwind_idx *idx;
-
-	/* Convert the symbol addresses to absolute values */
-	for (idx = __start_unwind_idx; idx < __stop_unwind_idx; idx++)
-		idx->addr = prel31_to_addr(&idx->addr);
-
-	pr_debug("unwind: ARM stack unwinding initialised\n");
-
-	return 0;
-}
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 20b3041..f76e755 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -13,6 +13,12 @@
 	*(.proc.info.init)						\
 	VMLINUX_SYMBOL(__proc_info_end) = .;
 
+#define IDMAP_TEXT							\
+	ALIGN_FUNCTION();						\
+	VMLINUX_SYMBOL(__idmap_text_start) = .;				\
+	*(.idmap.text)							\
+	VMLINUX_SYMBOL(__idmap_text_end) = .;
+
 #ifdef CONFIG_HOTPLUG_CPU
 #define ARM_CPU_DISCARD(x)
 #define ARM_CPU_KEEP(x)		x
@@ -92,6 +98,7 @@ SECTIONS
 			SCHED_TEXT
 			LOCK_TEXT
 			KPROBES_TEXT
+			IDMAP_TEXT
 #ifdef CONFIG_MMU
 			*(.fixup)
 #endif
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index cf73a7f..0ade0ac 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -13,7 +13,8 @@ lib-y		:= backtrace.o changebit.o csumipv6.o csumpartial.o   \
 		   testchangebit.o testclearbit.o testsetbit.o        \
 		   ashldi3.o ashrdi3.o lshrdi3.o muldi3.o             \
 		   ucmpdi2.o lib1funcs.o div64.o                      \
-		   io-readsb.o io-writesb.o io-readsl.o io-writesl.o
+		   io-readsb.o io-writesb.o io-readsl.o io-writesl.o  \
+		   call_with_stack.o
 
 mmu-y	:= clear_user.o copy_page.o getuser.o putuser.o
 
diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h
index 10d868a..d6408d1 100644
--- a/arch/arm/lib/bitops.h
+++ b/arch/arm/lib/bitops.h
@@ -1,5 +1,9 @@
+#include <asm/unwind.h>
+
 #if __LINUX_ARM_ARCH__ >= 6
-	.macro	bitop, instr
+	.macro	bitop, name, instr
+ENTRY(	\name		)
+UNWIND(	.fnstart	)
 	ands	ip, r1, #3
 	strneb	r1, [ip]		@ assert word-aligned
 	mov	r2, #1
@@ -13,9 +17,13 @@
 	cmp	r0, #0
 	bne	1b
 	bx	lr
+UNWIND(	.fnend		)
+ENDPROC(\name		)
 	.endm
 
-	.macro	testop, instr, store
+	.macro	testop, name, instr, store
+ENTRY(	\name		)
+UNWIND(	.fnstart	)
 	ands	ip, r1, #3
 	strneb	r1, [ip]		@ assert word-aligned
 	mov	r2, #1
@@ -34,9 +42,13 @@
 	cmp	r0, #0
 	movne	r0, #1
 2:	bx	lr
+UNWIND(	.fnend		)
+ENDPROC(\name		)
 	.endm
 #else
-	.macro	bitop, instr
+	.macro	bitop, name, instr
+ENTRY(	\name		)
+UNWIND(	.fnstart	)
 	ands	ip, r1, #3
 	strneb	r1, [ip]		@ assert word-aligned
 	and	r2, r0, #31
@@ -49,6 +61,8 @@
 	str	r2, [r1, r0, lsl #2]
 	restore_irqs ip
 	mov	pc, lr
+UNWIND(	.fnend		)
+ENDPROC(\name		)
 	.endm
 
 /**
@@ -59,7 +73,9 @@
  * Note: we can trivially conditionalise the store instruction
  * to avoid dirtying the data cache.
  */
-	.macro	testop, instr, store
+	.macro	testop, name, instr, store
+ENTRY(	\name		)
+UNWIND(	.fnstart	)
 	ands	ip, r1, #3
 	strneb	r1, [ip]		@ assert word-aligned
 	and	r3, r0, #31
@@ -73,5 +89,7 @@
 	moveq	r0, #0
 	restore_irqs ip
 	mov	pc, lr
+UNWIND(	.fnend		)
+ENDPROC(\name		)
 	.endm
 #endif
diff --git a/arch/arm/lib/call_with_stack.S b/arch/arm/lib/call_with_stack.S
new file mode 100644
index 0000000..916c80f
--- /dev/null
+++ b/arch/arm/lib/call_with_stack.S
@@ -0,0 +1,44 @@
+/*
+ * arch/arm/lib/call_with_stack.S
+ *
+ * Copyright (C) 2011 ARM Ltd.
+ * Written by Will Deacon <will.deacon@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * void call_with_stack(void (*fn)(void *), void *arg, void *sp)
+ *
+ * Change the stack to that pointed at by sp, then invoke fn(arg) with
+ * the new stack.
+ */
+ENTRY(call_with_stack)
+	str	sp, [r2, #-4]!
+	str	lr, [r2, #-4]!
+
+	mov	sp, r2
+	mov	r2, r0
+	mov	r0, r1
+
+	adr	lr, BSYM(1f)
+	mov	pc, r2
+
+1:	ldr	lr, [sp]
+	ldr	sp, [sp, #4]
+	mov	pc, lr
+ENDPROC(call_with_stack)
diff --git a/arch/arm/lib/changebit.S b/arch/arm/lib/changebit.S
index 68ed5b6..f402786 100644
--- a/arch/arm/lib/changebit.S
+++ b/arch/arm/lib/changebit.S
@@ -12,6 +12,4 @@
 #include "bitops.h"
                 .text
 
-ENTRY(_change_bit)
-	bitop	eor
-ENDPROC(_change_bit)
+bitop	_change_bit, eor
diff --git a/arch/arm/lib/clearbit.S b/arch/arm/lib/clearbit.S
index 4c04c3b..f6b75fb 100644
--- a/arch/arm/lib/clearbit.S
+++ b/arch/arm/lib/clearbit.S
@@ -12,6 +12,4 @@
 #include "bitops.h"
                 .text
 
-ENTRY(_clear_bit)
-	bitop	bic
-ENDPROC(_clear_bit)
+bitop	_clear_bit, bic
diff --git a/arch/arm/lib/setbit.S b/arch/arm/lib/setbit.S
index bbee5c6..618feda 100644
--- a/arch/arm/lib/setbit.S
+++ b/arch/arm/lib/setbit.S
@@ -12,6 +12,4 @@
 #include "bitops.h"
 		.text
 
-ENTRY(_set_bit)
-	bitop	orr
-ENDPROC(_set_bit)
+bitop	_set_bit, orr
diff --git a/arch/arm/lib/testchangebit.S b/arch/arm/lib/testchangebit.S
index 15a4d43..4becdc3 100644
--- a/arch/arm/lib/testchangebit.S
+++ b/arch/arm/lib/testchangebit.S
@@ -12,6 +12,4 @@
 #include "bitops.h"
                 .text
 
-ENTRY(_test_and_change_bit)
-	testop	eor, str
-ENDPROC(_test_and_change_bit)
+testop	_test_and_change_bit, eor, str
diff --git a/arch/arm/lib/testclearbit.S b/arch/arm/lib/testclearbit.S
index 521b66b..918841d 100644
--- a/arch/arm/lib/testclearbit.S
+++ b/arch/arm/lib/testclearbit.S
@@ -12,6 +12,4 @@
 #include "bitops.h"
                 .text
 
-ENTRY(_test_and_clear_bit)
-	testop	bicne, strne
-ENDPROC(_test_and_clear_bit)
+testop	_test_and_clear_bit, bicne, strne
diff --git a/arch/arm/lib/testsetbit.S b/arch/arm/lib/testsetbit.S
index 1c98cc2..8d1b2fe 100644
--- a/arch/arm/lib/testsetbit.S
+++ b/arch/arm/lib/testsetbit.S
@@ -12,6 +12,4 @@
 #include "bitops.h"
                 .text
 
-ENTRY(_test_and_set_bit)
-	testop	orreq, streq
-ENDPROC(_test_and_set_bit)
+testop	_test_and_set_bit, orreq, streq
diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c
index ecdd54d..2937339 100644
--- a/arch/arm/mach-at91/at91cap9.c
+++ b/arch/arm/mach-at91/at91cap9.c
@@ -313,7 +313,7 @@ static struct at91_gpio_bank at91cap9_gpio[] = {
 	}
 };
 
-static void at91cap9_reset(void)
+static void at91cap9_restart(char mode, const char *cmd)
 {
 	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
 }
@@ -335,7 +335,7 @@ static void __init at91cap9_map_io(void)
 
 static void __init at91cap9_initialize(void)
 {
-	at91_arch_reset = at91cap9_reset;
+	arm_pm_restart = at91cap9_restart;
 	pm_power_off = at91cap9_poweroff;
 	at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1);
 
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index 713d3bd..430a9fd 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -288,7 +288,7 @@ static struct at91_gpio_bank at91rm9200_gpio[] = {
 	}
 };
 
-static void at91rm9200_reset(void)
+static void at91rm9200_restart(char mode, const char *cmd)
 {
 	/*
 	 * Perform a hardware reset with the use of the Watchdog timer.
@@ -309,7 +309,7 @@ static void __init at91rm9200_map_io(void)
 
 static void __init at91rm9200_initialize(void)
 {
-	at91_arch_reset = at91rm9200_reset;
+	arm_pm_restart = at91rm9200_restart;
 	at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1)
 			| (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3)
 			| (1 << AT91RM9200_ID_IRQ4) | (1 << AT91RM9200_ID_IRQ5)
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 66591fa..ad93068 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -83,7 +83,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
  *  USB Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#ifdef CONFIG_USB_GADGET_AT91
+#ifdef CONFIG_USB_AT91
 static struct at91_udc_data udc_data;
 
 static struct resource udc_resources[] = {
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index b84a9f6..e76cd49 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -195,9 +195,9 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
 	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
 	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
-	CLKDEV_CON_DEV_ID("t3_clk", "atmel_tcb.1", &tc3_clk),
-	CLKDEV_CON_DEV_ID("t4_clk", "atmel_tcb.1", &tc4_clk),
-	CLKDEV_CON_DEV_ID("t5_clk", "atmel_tcb.1", &tc5_clk),
+	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk),
+	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk),
+	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk),
 	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk),
 	/* more usart lookup table for DT entries */
 	CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
@@ -327,7 +327,7 @@ static void __init at91sam9260_map_io(void)
 
 static void __init at91sam9260_initialize(void)
 {
-	at91_arch_reset = at91sam9_alt_reset;
+	arm_pm_restart = at91sam9_alt_restart;
 	pm_power_off = at91sam9260_poweroff;
 	at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
 			| (1 << AT91SAM9260_ID_IRQ2);
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 25e3464..629fa97 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -84,7 +84,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
  *  USB Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#ifdef CONFIG_USB_GADGET_AT91
+#ifdef CONFIG_USB_AT91
 static struct at91_udc_data udc_data;
 
 static struct resource udc_resources[] = {
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 658a518..19ac7c0 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -287,7 +287,7 @@ static void __init at91sam9261_map_io(void)
 
 static void __init at91sam9261_initialize(void)
 {
-	at91_arch_reset = at91sam9_alt_reset;
+	arm_pm_restart = at91sam9_alt_restart;
 	pm_power_off = at91sam9261_poweroff;
 	at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
 			| (1 << AT91SAM9261_ID_IRQ2);
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index ae78f4d..a178b58 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -87,7 +87,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
  *  USB Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#ifdef CONFIG_USB_GADGET_AT91
+#ifdef CONFIG_USB_AT91
 static struct at91_udc_data udc_data;
 
 static struct resource udc_resources[] = {
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index f83fbb0..50d0163 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -305,7 +305,7 @@ static void __init at91sam9263_map_io(void)
 
 static void __init at91sam9263_initialize(void)
 {
-	at91_arch_reset = at91sam9_alt_reset;
+	arm_pm_restart = at91sam9_alt_restart;
 	pm_power_off = at91sam9263_poweroff;
 	at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);
 
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index ad017eb..d5fbac9 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -92,7 +92,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
  *  USB Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#ifdef CONFIG_USB_GADGET_AT91
+#ifdef CONFIG_USB_AT91
 static struct at91_udc_data udc_data;
 
 static struct resource udc_resources[] = {
diff --git a/arch/arm/mach-at91/at91sam9_alt_reset.S b/arch/arm/mach-at91/at91sam9_alt_reset.S
index e0256de..d3f931c 100644
--- a/arch/arm/mach-at91/at91sam9_alt_reset.S
+++ b/arch/arm/mach-at91/at91sam9_alt_reset.S
@@ -14,20 +14,15 @@
  */
 
 #include <linux/linkage.h>
-#include <asm/system.h>
 #include <mach/hardware.h>
 #include <mach/at91sam9_sdramc.h>
 #include <mach/at91_rstc.h>
 
 			.arm
 
-			.globl	at91sam9_alt_reset
+			.globl	at91sam9_alt_restart
 
-at91sam9_alt_reset:	mrc	p15, 0, r0, c1, c0, 0
-			orr	r0, r0, #CR_I
-			mcr	p15, 0, r0, c1, c0, 0		@ enable I-cache
-
-			ldr	r0, .at91_va_base_sdramc	@ preload constants
+at91sam9_alt_restart:	ldr	r0, .at91_va_base_sdramc	@ preload constants
 			ldr	r1, .at91_va_base_rstc_cr
 
 			mov	r2, #1
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 318b040..ff21f7a 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -317,7 +317,7 @@ static struct at91_gpio_bank at91sam9g45_gpio[] = {
 	}
 };
 
-static void at91sam9g45_reset(void)
+static void at91sam9g45_restart(char mode, const char *cmd)
 {
 	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
 }
@@ -340,7 +340,7 @@ static void __init at91sam9g45_map_io(void)
 
 static void __init at91sam9g45_initialize(void)
 {
-	at91_arch_reset = at91sam9g45_reset;
+	arm_pm_restart = at91sam9g45_restart;
 	pm_power_off = at91sam9g45_poweroff;
 	at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0);
 
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index a238105..61cbb46 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -292,7 +292,7 @@ static void __init at91sam9rl_map_io(void)
 
 static void __init at91sam9rl_initialize(void)
 {
-	at91_arch_reset = at91sam9_alt_reset;
+	arm_pm_restart = at91sam9_alt_restart;
 	pm_power_off = at91sam9rl_poweroff;
 	at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0);
 
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index 938b34f..7f4503b 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -57,7 +57,7 @@ extern void at91_irq_suspend(void);
 extern void at91_irq_resume(void);
 
 /* reset */
-extern void at91sam9_alt_reset(void);
+extern void at91sam9_alt_restart(char, const char *);
 
  /* GPIO */
 #define AT91RM9200_PQFP		3	/* AT91RM9200 PQFP package has 3 banks */
@@ -71,5 +71,4 @@ struct at91_gpio_bank {
 extern void __init at91_gpio_init(struct at91_gpio_bank *, int nr_banks);
 extern void __init at91_gpio_irq_setup(void);
 
-extern void (*at91_arch_reset)(void);
 extern int at91_extern_irq;
diff --git a/arch/arm/mach-at91/include/mach/io.h b/arch/arm/mach-at91/include/mach/io.h
index 4298e78..4ca09ef 100644
--- a/arch/arm/mach-at91/include/mach/io.h
+++ b/arch/arm/mach-at91/include/mach/io.h
@@ -30,14 +30,6 @@
 
 #ifndef __ASSEMBLY__
 
-#ifndef CONFIG_ARCH_AT91X40
-#define __arch_ioremap	at91_ioremap
-#define __arch_iounmap	at91_iounmap
-#endif
-
-void __iomem *at91_ioremap(unsigned long phys, size_t size, unsigned int type);
-void at91_iounmap(volatile void __iomem *addr);
-
 static inline unsigned int at91_sys_read(unsigned int reg_offset)
 {
 	void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
diff --git a/arch/arm/mach-at91/include/mach/system.h b/arch/arm/mach-at91/include/mach/system.h
index 36af14b..cbd64f3 100644
--- a/arch/arm/mach-at91/include/mach/system.h
+++ b/arch/arm/mach-at91/include/mach/system.h
@@ -47,13 +47,4 @@ static inline void arch_idle(void)
 #endif
 }
 
-void (*at91_arch_reset)(void);
-
-static inline void arch_reset(char mode, const char *cmd)
-{
-	/* call the CPU-specific reset function */
-	if (at91_arch_reset)
-		(at91_arch_reset)();
-}
-
 #endif
diff --git a/arch/arm/mach-at91/include/mach/system_rev.h b/arch/arm/mach-at91/include/mach/system_rev.h
index 8f48660..ec164a4 100644
--- a/arch/arm/mach-at91/include/mach/system_rev.h
+++ b/arch/arm/mach-at91/include/mach/system_rev.h
@@ -19,7 +19,7 @@
 #define BOARD_HAVE_NAND_16BIT	(1 << 31)
 static inline int board_have_nand_16bit(void)
 {
-	return system_rev & BOARD_HAVE_NAND_16BIT;
+	return (system_rev & BOARD_HAVE_NAND_16BIT) ? 1 : 0;
 }
 
 #endif /* __ARCH_SYSTEM_REV_H__ */
diff --git a/arch/arm/mach-at91/include/mach/vmalloc.h b/arch/arm/mach-at91/include/mach/vmalloc.h
deleted file mode 100644
index 8e4a1bd..0000000
--- a/arch/arm/mach-at91/include/mach/vmalloc.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/vmalloc.h
- *
- *  Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#include <mach/hardware.h>
-
-#define VMALLOC_END		(AT91_VIRT_BASE & PGDIR_MASK)
-
-#endif
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index aa64294..cf98a8f 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -73,24 +73,6 @@ static struct map_desc at91_io_desc __initdata = {
 	.type		= MT_DEVICE,
 };
 
-void __iomem *at91_ioremap(unsigned long p, size_t size, unsigned int type)
-{
-	if (p >= AT91_BASE_SYS && p <= (AT91_BASE_SYS + SZ_16K - 1))
-		return (void __iomem *)AT91_IO_P2V(p);
-
-	return __arm_ioremap_caller(p, size, type, __builtin_return_address(0));
-}
-EXPORT_SYMBOL(at91_ioremap);
-
-void at91_iounmap(volatile void __iomem *addr)
-{
-	unsigned long virt = (unsigned long)addr;
-
-	if (virt >= VMALLOC_START && virt < VMALLOC_END)
-		__iounmap(addr);
-}
-EXPORT_SYMBOL(at91_iounmap);
-
 #define AT91_DBGU0	0xfffff200
 #define AT91_DBGU1	0xffffee00
 
diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c
index 31a1435..9e5e755 100644
--- a/arch/arm/mach-bcmring/arch.c
+++ b/arch/arm/mach-bcmring/arch.c
@@ -49,7 +49,29 @@ HW_DECLARE_SPINLOCK(gpio)
 #endif
 
 /* sysctl */
-int bcmring_arch_warm_reboot;	/* do a warm reboot on hard reset */
+static int bcmring_arch_warm_reboot;	/* do a warm reboot on hard reset */
+
+static void bcmring_restart(char mode, const char *cmd)
+{
+	printk("arch_reset:%c %x\n", mode, bcmring_arch_warm_reboot);
+
+	if (mode == 'h') {
+		/* Reboot configured in proc entry */
+		if (bcmring_arch_warm_reboot) {
+			printk("warm reset\n");
+			/* Issue Warm reset (do not reset ethernet switch, keep alive) */
+			chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_WARM);
+		} else {
+			/* Force reset of everything */
+			printk("force reset\n");
+			chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
+		}
+	} else {
+		/* Force reset of everything */
+		printk("force reset\n");
+		chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
+	}
+}
 
 static struct ctl_table_header *bcmring_sysctl_header;
 
@@ -173,4 +195,5 @@ MACHINE_START(BCMRING, "BCMRING")
 	.init_irq = bcmring_init_irq,
 	.timer = &bcmring_timer,
 	.init_machine = bcmring_init_machine
+	.restart = bcmring_restart,
 MACHINE_END
diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
index 430da12..6b67b7e 100644
--- a/arch/arm/mach-bcmring/core.c
+++ b/arch/arm/mach-bcmring/core.c
@@ -25,7 +25,6 @@
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
-#include <linux/sysdev.h>
 #include <linux/interrupt.h>
 #include <linux/amba/bus.h>
 #include <linux/clkdev.h>
diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c
index f4d4d6d..1a1a27d 100644
--- a/arch/arm/mach-bcmring/dma.c
+++ b/arch/arm/mach-bcmring/dma.c
@@ -1615,7 +1615,7 @@ DMA_MemType_t dma_mem_type(void *addr)
 {
 	unsigned long addrVal = (unsigned long)addr;
 
-	if (addrVal >= VMALLOC_END) {
+	if (addrVal >= CONSISTENT_BASE) {
 		/* NOTE: DMA virtual memory space starts at 0xFFxxxxxx */
 
 		/* dma_alloc_xxx pages are physically and virtually contiguous */
diff --git a/arch/arm/mach-bcmring/include/mach/system.h b/arch/arm/mach-bcmring/include/mach/system.h
index 38b3706..cb78250 100644
--- a/arch/arm/mach-bcmring/include/mach/system.h
+++ b/arch/arm/mach-bcmring/include/mach/system.h
@@ -20,35 +20,9 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <mach/csp/chipcHw_inline.h>
-
-extern int bcmring_arch_warm_reboot;
-
 static inline void arch_idle(void)
 {
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode, const char *cmd)
-{
-	printk("arch_reset:%c %x\n", mode, bcmring_arch_warm_reboot);
-
-	if (mode == 'h') {
-		/* Reboot configured in proc entry */
-		if (bcmring_arch_warm_reboot) {
-			printk("warm reset\n");
-			/* Issue Warm reset (do not reset ethernet switch, keep alive) */
-			chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_WARM);
-		} else {
-			/* Force reset of everything */
-			printk("force reset\n");
-			chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
-		}
-	} else {
-		/* Force reset of everything */
-		printk("force reset\n");
-		chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
-	}
-}
-
 #endif
diff --git a/arch/arm/mach-bcmring/include/mach/vmalloc.h b/arch/arm/mach-bcmring/include/mach/vmalloc.h
deleted file mode 100644
index 7397bd7..0000000
--- a/arch/arm/mach-bcmring/include/mach/vmalloc.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- *
- *  Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/*
- * Move VMALLOC_END to 0xf0000000 so that the vm space can range from
- * 0xe0000000 to 0xefffffff. This gives us 256 MB of vm space and handles
- * larger physical memory designs better.
- */
-#define VMALLOC_END       0xf0000000UL
diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile
index 4a19731..f2f0256 100644
--- a/arch/arm/mach-clps711x/Makefile
+++ b/arch/arm/mach-clps711x/Makefile
@@ -4,7 +4,7 @@
 
 # Object file lists.
 
-obj-y			:= irq.o mm.o time.o
+obj-y			:= common.o
 obj-m			:=
 obj-n			:=
 obj-			:=
diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c
index 0276091..3fb79a1 100644
--- a/arch/arm/mach-clps711x/autcpu12.c
+++ b/arch/arm/mach-clps711x/autcpu12.c
@@ -68,5 +68,6 @@ MACHINE_START(AUTCPU12, "autronix autcpu12")
 	.map_io		= autcpu12_map_io,
 	.init_irq	= clps711x_init_irq,
 	.timer		= &clps711x_timer,
+	.restart	= clps711x_restart,
 MACHINE_END
 
diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c
index 25b3bfd..c314f49 100644
--- a/arch/arm/mach-clps711x/cdb89712.c
+++ b/arch/arm/mach-clps711x/cdb89712.c
@@ -59,4 +59,5 @@ MACHINE_START(CDB89712, "Cirrus-CDB89712")
 	.map_io		= cdb89712_map_io,
 	.init_irq	= clps711x_init_irq,
 	.timer		= &clps711x_timer,
+	.restart	= clps711x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-clps711x/ceiva.c b/arch/arm/mach-clps711x/ceiva.c
index 1df9ec6..a70147e 100644
--- a/arch/arm/mach-clps711x/ceiva.c
+++ b/arch/arm/mach-clps711x/ceiva.c
@@ -60,4 +60,5 @@ MACHINE_START(CEIVA, "CEIVA/Polaroid Photo MAX Digital Picture Frame")
 	.map_io		= ceiva_map_io,
 	.init_irq	= clps711x_init_irq,
 	.timer		= &clps711x_timer,
+	.restart	= clps711x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-clps711x/clep7312.c b/arch/arm/mach-clps711x/clep7312.c
index 80496c0..dbc7842 100644
--- a/arch/arm/mach-clps711x/clep7312.c
+++ b/arch/arm/mach-clps711x/clep7312.c
@@ -41,5 +41,6 @@ MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312")
 	.map_io		= clps711x_map_io,
 	.init_irq	= clps711x_init_irq,
 	.timer		= &clps711x_timer,
+	.restart	= clps711x_restart,
 MACHINE_END
 
diff --git a/arch/arm/mach-clps711x/irq.c b/arch/arm/mach-clps711x/common.c
index c2eceee..ab1711b 100644
--- a/arch/arm/mach-clps711x/irq.c
+++ b/arch/arm/mach-clps711x/common.c
@@ -1,7 +1,9 @@
 /*
- *  linux/arch/arm/mach-clps711x/irq.c
+ *  linux/arch/arm/mach-clps711x/core.c
  *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *  Core support for the CLPS711x-based machines.
+ *
+ *  Copyright (C) 2001,2011 Deep Blue Solutions Ltd
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -17,16 +19,42 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
+#include <linux/kernel.h>
+#include <linux/mm.h>
 #include <linux/init.h>
-#include <linux/list.h>
+#include <linux/interrupt.h>
 #include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/sched.h>
+#include <linux/timex.h>
 
-#include <asm/mach/irq.h>
+#include <asm/sizes.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
-
+#include <asm/leds.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
 #include <asm/hardware/clps7111.h>
 
+/*
+ * This maps the generic CLPS711x registers
+ */
+static struct map_desc clps711x_io_desc[] __initdata = {
+	{
+		.virtual	= CLPS7111_VIRT_BASE,
+		.pfn		= __phys_to_pfn(CLPS7111_PHYS_BASE),
+		.length		= SZ_1M,
+		.type		= MT_DEVICE
+	}
+};
+
+void __init clps711x_map_io(void)
+{
+	iotable_init(clps711x_io_desc, ARRAY_SIZE(clps711x_io_desc));
+}
+
 static void int1_mask(struct irq_data *d)
 {
 	u32 intmr1;
@@ -112,15 +140,15 @@ void __init clps711x_init_irq(void)
 
 	for (i = 0; i < NR_IRQS; i++) {
 	        if (INT1_IRQS & (1 << i)) {
-	        	irq_set_chip_and_handler(i, &int1_chip,
+			irq_set_chip_and_handler(i, &int1_chip,
 						 handle_level_irq);
-	        	set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+			set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
 		}
 		if (INT2_IRQS & (1 << i)) {
 			irq_set_chip_and_handler(i, &int2_chip,
 						 handle_level_irq);
 			set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
-		}			
+		}
 	}
 
 	/*
@@ -141,3 +169,59 @@ void __init clps711x_init_irq(void)
 	clps_writel(0, SYNCIO);
 	clps_writel(0, KBDEOI);
 }
+
+/*
+ * gettimeoffset() returns time since last timer tick, in usecs.
+ *
+ * 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
+ * 'tick' is usecs per jiffy.
+ */
+static unsigned long clps711x_gettimeoffset(void)
+{
+	unsigned long hwticks;
+	hwticks = LATCH - (clps_readl(TC2D) & 0xffff);	/* since last underflow */
+	return (hwticks * (tick_nsec / 1000)) / LATCH;
+}
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t p720t_timer_interrupt(int irq, void *dev_id)
+{
+	timer_tick();
+	return IRQ_HANDLED;
+}
+
+static struct irqaction clps711x_timer_irq = {
+	.name		= "CLPS711x Timer Tick",
+	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= p720t_timer_interrupt,
+};
+
+static void __init clps711x_timer_init(void)
+{
+	struct timespec tv;
+	unsigned int syscon;
+
+	syscon = clps_readl(SYSCON1);
+	syscon |= SYSCON1_TC2S | SYSCON1_TC2M;
+	clps_writel(syscon, SYSCON1);
+
+	clps_writel(LATCH-1, TC2D); /* 512kHz / 100Hz - 1 */
+
+	setup_irq(IRQ_TC2OI, &clps711x_timer_irq);
+
+	tv.tv_nsec = 0;
+	tv.tv_sec = clps_readl(RTCDR);
+	do_settimeofday(&tv);
+}
+
+struct sys_timer clps711x_timer = {
+	.init		= clps711x_timer_init,
+	.offset		= clps711x_gettimeoffset,
+};
+
+void clps711x_restart(char mode, const char *cmd)
+{
+	soft_restart(0);
+}
diff --git a/arch/arm/mach-clps711x/common.h b/arch/arm/mach-clps711x/common.h
index 2b8b801..fc0f065 100644
--- a/arch/arm/mach-clps711x/common.h
+++ b/arch/arm/mach-clps711x/common.h
@@ -9,3 +9,4 @@ struct sys_timer;
 extern void clps711x_map_io(void);
 extern void clps711x_init_irq(void);
 extern struct sys_timer clps711x_timer;
+extern void clps711x_restart(char mode, const char *cmd);
diff --git a/arch/arm/mach-clps711x/edb7211-arch.c b/arch/arm/mach-clps711x/edb7211-arch.c
index 9721f61..5fad0b4 100644
--- a/arch/arm/mach-clps711x/edb7211-arch.c
+++ b/arch/arm/mach-clps711x/edb7211-arch.c
@@ -62,4 +62,5 @@ MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
 	.reserve	= edb7211_reserve,
 	.init_irq	= clps711x_init_irq,
 	.timer		= &clps711x_timer,
+	.restart	= clps711x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-clps711x/fortunet.c b/arch/arm/mach-clps711x/fortunet.c
index d992566..3a3f0b7 100644
--- a/arch/arm/mach-clps711x/fortunet.c
+++ b/arch/arm/mach-clps711x/fortunet.c
@@ -78,4 +78,5 @@ MACHINE_START(FORTUNET, "ARM-FortuNet")
 	.map_io		= clps711x_map_io,
 	.init_irq	= clps711x_init_irq,
 	.timer		= &clps711x_timer,
+	.restart	= clps711x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-clps711x/include/mach/system.h b/arch/arm/mach-clps711x/include/mach/system.h
index f916cd7..23d6ef8 100644
--- a/arch/arm/mach-clps711x/include/mach/system.h
+++ b/arch/arm/mach-clps711x/include/mach/system.h
@@ -32,9 +32,4 @@ static inline void arch_idle(void)
 	mov	r0, r0");
 }
 
-static inline void arch_reset(char mode, const char *cmd)
-{
-	cpu_reset(0);
-}
-
 #endif
diff --git a/arch/arm/mach-clps711x/include/mach/vmalloc.h b/arch/arm/mach-clps711x/include/mach/vmalloc.h
deleted file mode 100644
index 467b961..0000000
--- a/arch/arm/mach-clps711x/include/mach/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  arch/arm/mach-clps711x/include/mach/vmalloc.h
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define VMALLOC_END       0xd0000000UL
diff --git a/arch/arm/mach-clps711x/mm.c b/arch/arm/mach-clps711x/mm.c
deleted file mode 100644
index 9865921..0000000
--- a/arch/arm/mach-clps711x/mm.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/mm.c
- *
- *  Generic MM setup for the CLPS711x-based machines.
- *
- *  Copyright (C) 2001 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/sizes.h>
-#include <mach/hardware.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/mach/map.h>
-#include <asm/hardware/clps7111.h>
-
-/*
- * This maps the generic CLPS711x registers
- */
-static struct map_desc clps711x_io_desc[] __initdata = {
-	{
-		.virtual	= CLPS7111_VIRT_BASE,
-		.pfn		= __phys_to_pfn(CLPS7111_PHYS_BASE),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE
-	}
-};
-
-void __init clps711x_map_io(void)
-{
-	iotable_init(clps711x_io_desc, ARRAY_SIZE(clps711x_io_desc));
-}
diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c
index 6ecea95f..42ee8f3 100644
--- a/arch/arm/mach-clps711x/p720t.c
+++ b/arch/arm/mach-clps711x/p720t.c
@@ -93,6 +93,7 @@ MACHINE_START(P720T, "ARM-Prospector720T")
 	.map_io		= p720t_map_io,
 	.init_irq	= clps711x_init_irq,
 	.timer		= &clps711x_timer,
+	.restart	= clps711x_restart,
 MACHINE_END
 
 static int p720t_hw_init(void)
diff --git a/arch/arm/mach-clps711x/time.c b/arch/arm/mach-clps711x/time.c
deleted file mode 100644
index d581ef0..0000000
--- a/arch/arm/mach-clps711x/time.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/time.c
- *
- *  Copyright (C) 2001 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/timex.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/sched.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/leds.h>
-#include <asm/hardware/clps7111.h>
-
-#include <asm/mach/time.h>
-
-
-/*
- * gettimeoffset() returns time since last timer tick, in usecs.
- *
- * 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
- * 'tick' is usecs per jiffy.
- */
-static unsigned long clps711x_gettimeoffset(void)
-{
-	unsigned long hwticks;
-	hwticks = LATCH - (clps_readl(TC2D) & 0xffff);	/* since last underflow */
-	return (hwticks * (tick_nsec / 1000)) / LATCH;
-}
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t
-p720t_timer_interrupt(int irq, void *dev_id)
-{
-	timer_tick();
-	return IRQ_HANDLED;
-}
-
-static struct irqaction clps711x_timer_irq = {
-	.name		= "CLPS711x Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= p720t_timer_interrupt,
-};
-
-static void __init clps711x_timer_init(void)
-{
-	struct timespec tv;
-	unsigned int syscon;
-
-	syscon = clps_readl(SYSCON1);
-	syscon |= SYSCON1_TC2S | SYSCON1_TC2M;
-	clps_writel(syscon, SYSCON1);
-
-	clps_writel(LATCH-1, TC2D); /* 512kHz / 100Hz - 1 */
-
-	setup_irq(IRQ_TC2OI, &clps711x_timer_irq);
-
-	tv.tv_nsec = 0;
-	tv.tv_sec = clps_readl(RTCDR);
-	do_settimeofday(&tv);
-}
-
-struct sys_timer clps711x_timer = {
-	.init		= clps711x_timer_init,
-	.offset		= clps711x_gettimeoffset,
-};
diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c
index 55f7b4b..2c5fb4c 100644
--- a/arch/arm/mach-cns3xxx/cns3420vb.c
+++ b/arch/arm/mach-cns3xxx/cns3420vb.c
@@ -26,6 +26,7 @@
 #include <linux/mtd/partitions.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
@@ -201,5 +202,7 @@ MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board")
 	.map_io		= cns3420_map_io,
 	.init_irq	= cns3xxx_init_irq,
 	.timer		= &cns3xxx_timer,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= cns3420_init,
+	.restart	= cns3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-cns3xxx/core.h b/arch/arm/mach-cns3xxx/core.h
index fcd2253..4894b8c 100644
--- a/arch/arm/mach-cns3xxx/core.h
+++ b/arch/arm/mach-cns3xxx/core.h
@@ -22,5 +22,6 @@ static inline void cns3xxx_l2x0_init(void) {}
 void __init cns3xxx_map_io(void);
 void __init cns3xxx_init_irq(void);
 void cns3xxx_power_off(void);
+void cns3xxx_restart(char, const char *);
 
 #endif /* __CNS3XXX_CORE_H */
diff --git a/arch/arm/mach-cns3xxx/include/mach/entry-macro.S b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S
index d87bfc3..01c57df 100644
--- a/arch/arm/mach-cns3xxx/include/mach/entry-macro.S
+++ b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S
@@ -8,8 +8,6 @@
  * published by the Free Software Foundation.
  */
 
-#include <asm/hardware/entry-macro-gic.S>
-
 		.macro	disable_fiq
 		.endm
 
diff --git a/arch/arm/mach-cns3xxx/include/mach/system.h b/arch/arm/mach-cns3xxx/include/mach/system.h
index 4f16c9b..9e56b7d 100644
--- a/arch/arm/mach-cns3xxx/include/mach/system.h
+++ b/arch/arm/mach-cns3xxx/include/mach/system.h
@@ -11,7 +11,6 @@
 #ifndef __MACH_SYSTEM_H
 #define __MACH_SYSTEM_H
 
-#include <linux/io.h>
 #include <asm/proc-fns.h>
 
 static inline void arch_idle(void)
@@ -23,6 +22,4 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-void arch_reset(char mode, const char *cmd);
-
 #endif
diff --git a/arch/arm/mach-cns3xxx/include/mach/vmalloc.h b/arch/arm/mach-cns3xxx/include/mach/vmalloc.h
deleted file mode 100644
index 1dd231d..0000000
--- a/arch/arm/mach-cns3xxx/include/mach/vmalloc.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * Copyright 2000 Russell King.
- * Copyright 2003 ARM Limited
- * Copyright 2008 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- */
-
-#define VMALLOC_END		0xd8000000UL
diff --git a/arch/arm/mach-cns3xxx/pm.c b/arch/arm/mach-cns3xxx/pm.c
index 0c04678..3645808 100644
--- a/arch/arm/mach-cns3xxx/pm.c
+++ b/arch/arm/mach-cns3xxx/pm.c
@@ -11,9 +11,9 @@
 #include <linux/io.h>
 #include <linux/delay.h>
 #include <linux/atomic.h>
-#include <mach/system.h>
 #include <mach/cns3xxx.h>
 #include <mach/pm.h>
+#include "core.h"
 
 void cns3xxx_pwr_clk_en(unsigned int block)
 {
@@ -89,7 +89,7 @@ void cns3xxx_pwr_soft_rst(unsigned int block)
 }
 EXPORT_SYMBOL(cns3xxx_pwr_soft_rst);
 
-void arch_reset(char mode, const char *cmd)
+void cns3xxx_restart(char mode, const char *cmd)
 {
 	/*
 	 * To reset, we hit the on-board reset register
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 495e313..2db78bd 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -4,7 +4,7 @@
 #
 
 # Common objects
-obj-y 			:= time.o clock.o serial.o io.o psc.o \
+obj-y 			:= time.o clock.o serial.o psc.o \
 			   dma.o usb.o common.o sram.o aemif.o
 
 obj-$(CONFIG_DAVINCI_MUX)		+= mux.o
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 11c3db9..dc1afe5 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -682,4 +682,5 @@ MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137/AM17x EVM")
 	.timer		= &davinci_timer,
 	.init_machine	= da830_evm_init,
 	.dma_zone_size	= SZ_128M,
+	.restart	= da8xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 1d7d249..f8a682f 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -753,7 +753,7 @@ static struct snd_platform_data da850_evm_snd_data = {
 	.num_serializer	= ARRAY_SIZE(da850_iis_serializer_direction),
 	.tdm_slots	= 2,
 	.serial_dir	= da850_iis_serializer_direction,
-	.asp_chan_q	= EVENTQ_1,
+	.asp_chan_q	= EVENTQ_0,
 	.version	= MCASP_VERSION_2,
 	.txnumevt	= 1,
 	.rxnumevt	= 1,
@@ -1411,4 +1411,5 @@ MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM")
 	.timer		= &davinci_timer,
 	.init_machine	= da850_evm_init,
 	.dma_zone_size	= SZ_128M,
+	.restart	= da8xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 4e0e707..275341f 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -357,4 +357,5 @@ MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")
 	.timer	      = &davinci_timer,
 	.init_machine = dm355_evm_init,
 	.dma_zone_size	= SZ_128M,
+	.restart	= davinci_restart,
 MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index ff2d241..e99db28 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -276,4 +276,5 @@ MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard")
 	.timer	      = &davinci_timer,
 	.init_machine = dm355_leopard_init,
 	.dma_zone_size	= SZ_128M,
+	.restart	= davinci_restart,
 MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 1918ae7..346e1de 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -107,7 +107,7 @@ static struct mtd_partition davinci_nand_partitions[] = {
 		/* UBL (a few copies) plus U-Boot */
 		.name		= "bootloader",
 		.offset		= 0,
-		.size		= 28 * NAND_BLOCK_SIZE,
+		.size		= 30 * NAND_BLOCK_SIZE,
 		.mask_flags	= MTD_WRITEABLE, /* force read-only */
 	}, {
 		/* U-Boot environment */
@@ -618,5 +618,6 @@ MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
 	.timer		= &davinci_timer,
 	.init_machine	= dm365_evm_init,
 	.dma_zone_size	= SZ_128M,
+	.restart	= davinci_restart,
 MACHINE_END
 
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 0cf8abf..a64b49c 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -719,4 +719,5 @@ MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
 	.timer	      = &davinci_timer,
 	.init_machine = davinci_evm_init,
 	.dma_zone_size	= SZ_128M,
+	.restart	= davinci_restart,
 MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index e574d7f8..6401755 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -564,7 +564,7 @@ static int setup_vpif_input_channel_mode(int mux_mode)
 	int val;
 	u32 value;
 
-	if (!vpif_vsclkdis_reg || !cpld_client)
+	if (!vpif_vidclkctl_reg || !cpld_client)
 		return -ENXIO;
 
 	val = i2c_smbus_read_byte(cpld_client);
@@ -572,7 +572,7 @@ static int setup_vpif_input_channel_mode(int mux_mode)
 		return val;
 
 	spin_lock_irqsave(&vpif_reg_lock, flags);
-	value = __raw_readl(vpif_vsclkdis_reg);
+	value = __raw_readl(vpif_vidclkctl_reg);
 	if (mux_mode) {
 		val &= VPIF_INPUT_TWO_CHANNEL;
 		value |= VIDCH1CLK;
@@ -580,7 +580,7 @@ static int setup_vpif_input_channel_mode(int mux_mode)
 		val |= VPIF_INPUT_ONE_CHANNEL;
 		value &= ~VIDCH1CLK;
 	}
-	__raw_writel(value, vpif_vsclkdis_reg);
+	__raw_writel(value, vpif_vidclkctl_reg);
 	spin_unlock_irqrestore(&vpif_reg_lock, flags);
 
 	err = i2c_smbus_write_byte(cpld_client, val);
@@ -799,6 +799,7 @@ MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
 	.timer        = &davinci_timer,
 	.init_machine = evm_init,
 	.dma_zone_size	= SZ_128M,
+	.restart	= davinci_restart,
 MACHINE_END
 
 MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM")
@@ -808,5 +809,6 @@ MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM")
 	.timer        = &davinci_timer,
 	.init_machine = evm_init,
 	.dma_zone_size	= SZ_128M,
+	.restart	= davinci_restart,
 MACHINE_END
 
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index 3cfff55..672d820 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -573,4 +573,5 @@ MACHINE_START(MITYOMAPL138, "MityDSP-L138/MityARM-1808")
 	.timer		= &davinci_timer,
 	.init_machine	= mityomapl138_init,
 	.dma_zone_size	= SZ_128M,
+	.restart	= da8xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index e5f231a..6c4a164 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -278,4 +278,5 @@ MACHINE_START(NEUROS_OSD2, "Neuros OSD2")
 	.timer		= &davinci_timer,
 	.init_machine = davinci_ntosd2_init,
 	.dma_zone_size	= SZ_128M,
+	.restart	= davinci_restart,
 MACHINE_END
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index c6701e4..e7c0c7c 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -344,4 +344,5 @@ MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard")
 	.timer		= &davinci_timer,
 	.init_machine	= omapl138_hawk_init,
 	.dma_zone_size	= SZ_128M,
+	.restart	= da8xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index 5dd4da9..0b136a8 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -157,4 +157,5 @@ MACHINE_START(SFFSDR, "Lyrtech SFFSDR")
 	.timer	      = &davinci_timer,
 	.init_machine = davinci_sffsdr_init,
 	.dma_zone_size	= SZ_128M,
+	.restart	= davinci_restart,
 MACHINE_END
diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c
index f69e40a..5f14e30 100644
--- a/arch/arm/mach-davinci/board-tnetv107x-evm.c
+++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c
@@ -283,4 +283,5 @@ MACHINE_START(TNETV107X, "TNETV107X EVM")
 	.timer		= &davinci_timer,
 	.init_machine	= tnetv107x_evm_board_init,
 	.dma_zone_size	= SZ_128M,
+	.restart	= tnetv107x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c
index 865ffe5..cb9b2e4 100644
--- a/arch/arm/mach-davinci/common.c
+++ b/arch/arm/mach-davinci/common.c
@@ -97,9 +97,6 @@ void __init davinci_common_init(struct davinci_soc_info *soc_info)
 	local_flush_tlb_all();
 	flush_cache_all();
 
-	if (!davinci_soc_info.reset)
-		davinci_soc_info.reset = davinci_watchdog_reset;
-
 	/*
 	 * We want to check CPU revision early for cpu_is_xxxx() macros.
 	 * IO space mapping must be initialized before we can do that.
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index a6bf5dc..deee5c2 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -1201,7 +1201,6 @@ static struct davinci_soc_info davinci_soc_info_da830 = {
 	.gpio_irq		= IRQ_DA8XX_GPIO0,
 	.serial_dev		= &da8xx_serial_device,
 	.emac_pdata		= &da8xx_emac_pdata,
-	.reset_device		= &da8xx_wdt_device,
 };
 
 void __init da830_init(void)
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index b047f87..0ed7fdb 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -1121,7 +1121,6 @@ static struct davinci_soc_info davinci_soc_info_da850 = {
 	.emac_pdata		= &da8xx_emac_pdata,
 	.sram_dma		= DA8XX_ARM_RAM_BASE,
 	.sram_len		= SZ_8K,
-	.reset_device		= &da8xx_wdt_device,
 };
 
 void __init da850_init(void)
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 68def71..42dbf3d 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -363,6 +363,11 @@ struct platform_device da8xx_wdt_device = {
 	.resource	= da8xx_watchdog_resources,
 };
 
+void da8xx_restart(char mode, const char *cmd)
+{
+	davinci_watchdog_reset(&da8xx_wdt_device);
+}
+
 int __init da8xx_register_watchdog(void)
 {
 	return platform_device_register(&da8xx_wdt_device);
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index 806a2f0..50c0156 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -291,6 +291,11 @@ struct platform_device davinci_wdt_device = {
 	.resource	= wdt_resources,
 };
 
+void davinci_restart(char mode, const char *cmd)
+{
+	davinci_watchdog_reset(&davinci_wdt_device);
+}
+
 static void davinci_init_wdt(void)
 {
 	platform_device_register(&davinci_wdt_device);
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index fe520d4..19667cf 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -853,7 +853,6 @@ static struct davinci_soc_info davinci_soc_info_dm355 = {
 	.serial_dev		= &dm355_serial_device,
 	.sram_dma		= 0x00010000,
 	.sram_len		= SZ_32K,
-	.reset_device		= &davinci_wdt_device,
 };
 
 void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata)
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index 679e168..f15b435 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -1083,7 +1083,6 @@ static struct davinci_soc_info davinci_soc_info_dm365 = {
 	.emac_pdata		= &dm365_emac_pdata,
 	.sram_dma		= 0x00010000,
 	.sram_len		= SZ_32K,
-	.reset_device		= &davinci_wdt_device,
 };
 
 void __init dm365_init_asp(struct snd_platform_data *pdata)
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 3470983..0800f9c 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -767,7 +767,6 @@ static struct davinci_soc_info davinci_soc_info_dm644x = {
 	.emac_pdata		= &dm644x_emac_pdata,
 	.sram_dma		= 0x00008000,
 	.sram_len		= SZ_16K,
-	.reset_device		= &davinci_wdt_device,
 };
 
 void __init dm644x_init_asp(struct snd_platform_data *pdata)
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 0b68ed5..00f7743 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -161,7 +161,6 @@ static struct clk dsp_clk = {
 	.name = "dsp",
 	.parent = &pll1_sysclk1,
 	.lpsc = DM646X_LPSC_C64X_CPU,
-	.flags = PSC_DSP,
 	.usecount = 1,			/* REVISIT how to disable? */
 };
 
@@ -855,7 +854,6 @@ static struct davinci_soc_info davinci_soc_info_dm646x = {
 	.emac_pdata		= &dm646x_emac_pdata,
 	.sram_dma		= 0x10010000,
 	.sram_len		= SZ_32K,
-	.reset_device		= &davinci_wdt_device,
 };
 
 void __init dm646x_init_mcasp0(struct snd_platform_data *pdata)
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
index a57cba2..5cd39a4 100644
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -77,14 +77,13 @@ struct davinci_soc_info {
 	struct emac_platform_data	*emac_pdata;
 	dma_addr_t			sram_dma;
 	unsigned			sram_len;
-	struct platform_device		*reset_device;
-	void				(*reset)(struct platform_device *);
 };
 
 extern struct davinci_soc_info davinci_soc_info;
 
 extern void davinci_common_init(struct davinci_soc_info *soc_info);
 extern void davinci_init_ide(void);
+void davinci_restart(char mode, const char *cmd);
 
 /* standard place to map on-chip SRAMs; they *may* support DMA */
 #define SRAM_VIRT	0xfffe0000
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index eaca7d8..ee3461d 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -91,6 +91,7 @@ int da8xx_register_cpuidle(void);
 void __iomem * __init da8xx_get_mem_ctlr(void);
 int da850_register_pm(struct platform_device *pdev);
 int __init da850_register_sata(unsigned long refclkpn);
+void da8xx_restart(char mode, const char *cmd);
 
 extern struct platform_device da8xx_serial_device;
 extern struct emac_platform_data da8xx_emac_pdata;
diff --git a/arch/arm/mach-davinci/include/mach/io.h b/arch/arm/mach-davinci/include/mach/io.h
index d1b9549..b2267d1 100644
--- a/arch/arm/mach-davinci/include/mach/io.h
+++ b/arch/arm/mach-davinci/include/mach/io.h
@@ -21,12 +21,4 @@
 #define __mem_pci(a)		(a)
 #define __mem_isa(a)		(a)
 
-#ifndef __ASSEMBLER__
-#define __arch_ioremap		davinci_ioremap
-#define __arch_iounmap		davinci_iounmap
-
-void __iomem *davinci_ioremap(unsigned long phys, size_t size,
-			      unsigned int type);
-void davinci_iounmap(volatile void __iomem *addr);
-#endif
 #endif /* __ASM_ARCH_IO_H */
diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h
index fa59c09..8bc3fc2 100644
--- a/arch/arm/mach-davinci/include/mach/psc.h
+++ b/arch/arm/mach-davinci/include/mach/psc.h
@@ -233,7 +233,7 @@
 #define PTCMD		0x120
 #define PTSTAT		0x128
 #define PDSTAT		0x200
-#define PDCTL1		0x304
+#define PDCTL		0x300
 #define MDSTAT		0x800
 #define MDCTL		0xA00
 
@@ -244,7 +244,10 @@
 #define PSC_STATE_ENABLE	3
 
 #define MDSTAT_STATE_MASK	0x3f
+#define PDSTAT_STATE_MASK	0x1f
 #define MDCTL_FORCE		BIT(31)
+#define PDCTL_NEXT		BIT(1)
+#define PDCTL_EPCGOOD		BIT(8)
 
 #ifndef __ASSEMBLER__
 
diff --git a/arch/arm/mach-davinci/include/mach/system.h b/arch/arm/mach-davinci/include/mach/system.h
index e65629c..fcb7a01 100644
--- a/arch/arm/mach-davinci/include/mach/system.h
+++ b/arch/arm/mach-davinci/include/mach/system.h
@@ -18,10 +18,4 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode, const char *cmd)
-{
-	if (davinci_soc_info.reset)
-		davinci_soc_info.reset(davinci_soc_info.reset_device);
-}
-
 #endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-davinci/include/mach/tnetv107x.h b/arch/arm/mach-davinci/include/mach/tnetv107x.h
index 89c1fdc..83e5926 100644
--- a/arch/arm/mach-davinci/include/mach/tnetv107x.h
+++ b/arch/arm/mach-davinci/include/mach/tnetv107x.h
@@ -54,6 +54,7 @@ extern struct platform_device tnetv107x_serial_device;
 extern void __init tnetv107x_init(void);
 extern void __init tnetv107x_devices_init(struct tnetv107x_device_info *);
 extern void __init tnetv107x_irq_init(void);
+void tnetv107x_restart(char mode, const char *cmd);
 
 #endif
 
diff --git a/arch/arm/mach-davinci/include/mach/vmalloc.h b/arch/arm/mach-davinci/include/mach/vmalloc.h
deleted file mode 100644
index d49646a..0000000
--- a/arch/arm/mach-davinci/include/mach/vmalloc.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * DaVinci vmalloc definitions
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <mach/hardware.h>
-
-/* Allow vmalloc range until the IO virtual range minus a 2M "hole" */
-#define VMALLOC_END	  (IO_VIRT - (2<<20))
diff --git a/arch/arm/mach-davinci/io.c b/arch/arm/mach-davinci/io.c
deleted file mode 100644
index 8ea60a8b..0000000
--- a/arch/arm/mach-davinci/io.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * DaVinci I/O mapping code
- *
- * Copyright (C) 2005-2006 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/io.h>
-
-#include <asm/tlb.h>
-#include <asm/mach/map.h>
-
-#include <mach/common.h>
-
-/*
- * Intercept ioremap() requests for addresses in our fixed mapping regions.
- */
-void __iomem *davinci_ioremap(unsigned long p, size_t size, unsigned int type)
-{
-	struct map_desc *desc = davinci_soc_info.io_desc;
-	int desc_num = davinci_soc_info.io_desc_num;
-	int i;
-
-	for (i = 0; i < desc_num; i++, desc++) {
-		unsigned long iophys = __pfn_to_phys(desc->pfn);
-		unsigned long iosize = desc->length;
-
-		if (p >= iophys && (p + size) <= (iophys + iosize))
-			return __io(desc->virtual + p - iophys);
-	}
-
-	return __arm_ioremap_caller(p, size, type,
-					__builtin_return_address(0));
-}
-EXPORT_SYMBOL(davinci_ioremap);
-
-void davinci_iounmap(volatile void __iomem *addr)
-{
-	unsigned long virt = (unsigned long)addr;
-
-	if (virt >= VMALLOC_START && virt < VMALLOC_END)
-		__iounmap(addr);
-}
-EXPORT_SYMBOL(davinci_iounmap);
diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c
index 1fb6bdf..d7e210f 100644
--- a/arch/arm/mach-davinci/psc.c
+++ b/arch/arm/mach-davinci/psc.c
@@ -52,7 +52,7 @@ int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id)
 void davinci_psc_config(unsigned int domain, unsigned int ctlr,
 		unsigned int id, bool enable, u32 flags)
 {
-	u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl;
+	u32 epcpr, ptcmd, ptstat, pdstat, pdctl, mdstat, mdctl;
 	void __iomem *psc_base;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 	u32 next_state = PSC_STATE_ENABLE;
@@ -79,11 +79,11 @@ void davinci_psc_config(unsigned int domain, unsigned int ctlr,
 		mdctl |= MDCTL_FORCE;
 	__raw_writel(mdctl, psc_base + MDCTL + 4 * id);
 
-	pdstat = __raw_readl(psc_base + PDSTAT);
-	if ((pdstat & 0x00000001) == 0) {
-		pdctl1 = __raw_readl(psc_base + PDCTL1);
-		pdctl1 |= 0x1;
-		__raw_writel(pdctl1, psc_base + PDCTL1);
+	pdstat = __raw_readl(psc_base + PDSTAT + 4 * domain);
+	if ((pdstat & PDSTAT_STATE_MASK) == 0) {
+		pdctl = __raw_readl(psc_base + PDCTL + 4 * domain);
+		pdctl |= PDCTL_NEXT;
+		__raw_writel(pdctl, psc_base + PDCTL + 4 * domain);
 
 		ptcmd = 1 << domain;
 		__raw_writel(ptcmd, psc_base + PTCMD);
@@ -92,9 +92,9 @@ void davinci_psc_config(unsigned int domain, unsigned int ctlr,
 			epcpr = __raw_readl(psc_base + EPCPR);
 		} while ((((epcpr >> domain) & 1) == 0));
 
-		pdctl1 = __raw_readl(psc_base + PDCTL1);
-		pdctl1 |= 0x100;
-		__raw_writel(pdctl1, psc_base + PDCTL1);
+		pdctl = __raw_readl(psc_base + PDCTL + 4 * domain);
+		pdctl |= PDCTL_EPCGOOD;
+		__raw_writel(pdctl, psc_base + PDCTL + 4 * domain);
 	} else {
 		ptcmd = 1 << domain;
 		__raw_writel(ptcmd, psc_base + PTCMD);
diff --git a/arch/arm/mach-davinci/tnetv107x.c b/arch/arm/mach-davinci/tnetv107x.c
index 409bb86..dc1a209 100644
--- a/arch/arm/mach-davinci/tnetv107x.c
+++ b/arch/arm/mach-davinci/tnetv107x.c
@@ -730,6 +730,11 @@ static void tnetv107x_watchdog_reset(struct platform_device *pdev)
 	__raw_writel(1, &regs->kick);
 }
 
+void tnetv107x_restart(char mode, const char *cmd)
+{
+	tnetv107x_watchdog_reset(&tnetv107x_wdt_device);
+}
+
 static struct davinci_soc_info tnetv107x_soc_info = {
 	.io_desc		= io_desc,
 	.io_desc_num		= ARRAY_SIZE(io_desc),
@@ -752,8 +757,6 @@ static struct davinci_soc_info tnetv107x_soc_info = {
 	.gpio_num		= TNETV107X_N_GPIO,
 	.timer_info		= &timer_info,
 	.serial_dev		= &tnetv107x_serial_device,
-	.reset			= tnetv107x_watchdog_reset,
-	.reset_device		= &tnetv107x_wdt_device,
 };
 
 void __init tnetv107x_init(void)
diff --git a/arch/arm/mach-dove/cm-a510.c b/arch/arm/mach-dove/cm-a510.c
index c8a406f..792b4e2 100644
--- a/arch/arm/mach-dove/cm-a510.c
+++ b/arch/arm/mach-dove/cm-a510.c
@@ -93,4 +93,5 @@ MACHINE_START(CM_A510, "Compulab CM-A510 Board")
 	.init_early	= dove_init_early,
 	.init_irq	= dove_init_irq,
 	.timer		= &dove_timer,
+	.restart	= dove_restart,
 MACHINE_END
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index a9e0dae..13bb236 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -292,3 +292,19 @@ void __init dove_init(void)
 	dove_xor0_init();
 	dove_xor1_init();
 }
+
+void dove_restart(char mode, const char *cmd)
+{
+	/*
+	 * Enable soft reset to assert RSTOUTn.
+	 */
+	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+	/*
+	 * Assert soft reset.
+	 */
+	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+	while (1)
+		;
+}
diff --git a/arch/arm/mach-dove/common.h b/arch/arm/mach-dove/common.h
index 6a2046e..4202730 100644
--- a/arch/arm/mach-dove/common.h
+++ b/arch/arm/mach-dove/common.h
@@ -39,5 +39,6 @@ void dove_spi1_init(void);
 void dove_i2c_init(void);
 void dove_sdio0_init(void);
 void dove_sdio1_init(void);
+void dove_restart(char, const char *);
 
 #endif
diff --git a/arch/arm/mach-dove/dove-db-setup.c b/arch/arm/mach-dove/dove-db-setup.c
index 11ea34e..ea77ae4 100644
--- a/arch/arm/mach-dove/dove-db-setup.c
+++ b/arch/arm/mach-dove/dove-db-setup.c
@@ -100,4 +100,5 @@ MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board")
 	.init_early	= dove_init_early,
 	.init_irq	= dove_init_irq,
 	.timer		= &dove_timer,
+	.restart	= dove_restart,
 MACHINE_END
diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h
index b20ec9a..ad1165d 100644
--- a/arch/arm/mach-dove/include/mach/dove.h
+++ b/arch/arm/mach-dove/include/mach/dove.h
@@ -11,8 +11,6 @@
 #ifndef __ASM_ARCH_DOVE_H
 #define __ASM_ARCH_DOVE_H
 
-#include <mach/vmalloc.h>
-
 /*
  * Marvell Dove address maps.
  *
diff --git a/arch/arm/mach-dove/include/mach/system.h b/arch/arm/mach-dove/include/mach/system.h
index 356afda..3027954 100644
--- a/arch/arm/mach-dove/include/mach/system.h
+++ b/arch/arm/mach-dove/include/mach/system.h
@@ -9,28 +9,9 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <mach/bridge-regs.h>
-
 static inline void arch_idle(void)
 {
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode, const char *cmd)
-{
-	/*
-	 * Enable soft reset to assert RSTOUTn.
-	 */
-	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
-
-	/*
-	 * Assert soft reset.
-	 */
-	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
-
-	while (1)
-		;
-}
-
-
 #endif
diff --git a/arch/arm/mach-dove/include/mach/vmalloc.h b/arch/arm/mach-dove/include/mach/vmalloc.h
deleted file mode 100644
index a28792c..0000000
--- a/arch/arm/mach-dove/include/mach/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-dove/include/mach/vmalloc.h
- */
-
-#define VMALLOC_END	0xfd800000UL
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index d0ce8ab..294aad0 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -278,13 +278,19 @@ static int __init ebsa110_init(void)
 
 arch_initcall(ebsa110_init);
 
+static void ebsa110_restart(char mode, const char *cmd)
+{
+	soft_restart(0x80000000);
+}
+
 MACHINE_START(EBSA110, "EBSA110")
 	/* Maintainer: Russell King */
 	.atag_offset	= 0x400,
 	.reserve_lp0	= 1,
 	.reserve_lp2	= 1,
-	.soft_reboot	= 1,
+	.restart_mode	= 's',
 	.map_io		= ebsa110_map_io,
 	.init_irq	= ebsa110_init_irq,
 	.timer		= &ebsa110_timer,
+	.restart	= ebsa110_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ebsa110/include/mach/system.h b/arch/arm/mach-ebsa110/include/mach/system.h
index 9a26245..2e4af65 100644
--- a/arch/arm/mach-ebsa110/include/mach/system.h
+++ b/arch/arm/mach-ebsa110/include/mach/system.h
@@ -34,6 +34,4 @@ static inline void arch_idle(void)
 	asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
 }
 
-#define arch_reset(mode, cmd)	cpu_reset(0x80000000)
-
 #endif
diff --git a/arch/arm/mach-ebsa110/include/mach/vmalloc.h b/arch/arm/mach-ebsa110/include/mach/vmalloc.h
deleted file mode 100644
index ea141b7a..0000000
--- a/arch/arm/mach-ebsa110/include/mach/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- *  arch/arm/mach-ebsa110/include/mach/vmalloc.h
- *
- *  Copyright (C) 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define VMALLOC_END       0xdf000000UL
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index 0713448..681e939 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -16,6 +16,7 @@
 
 #include <mach/hardware.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -36,6 +37,8 @@ MACHINE_START(ADSSPHERE, "ADS Sphere board")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= adssphere_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 2432a6b..24203f9 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -906,3 +906,15 @@ void __init ep93xx_init_devices(void)
 	platform_device_register(&ep93xx_ohci_device);
 	platform_device_register(&ep93xx_leds);
 }
+
+void ep93xx_restart(char mode, const char *cmd)
+{
+	/*
+	 * Set then clear the SWRST bit to initiate a software reset
+	 */
+	ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_SWRST);
+	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_SWRST);
+
+	while (1)
+		;
+}
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index 70ef8c5..d115653 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -39,6 +39,7 @@
 #include <mach/ep93xx_spi.h>
 #include <mach/gpio-ep93xx.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -250,8 +251,10 @@ MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
 
@@ -261,8 +264,10 @@ MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
 
@@ -272,8 +277,10 @@ MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
 
@@ -283,8 +290,10 @@ MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
 
@@ -294,8 +303,10 @@ MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
 
@@ -305,8 +316,10 @@ MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
 
@@ -316,8 +329,10 @@ MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
 
@@ -327,7 +342,9 @@ MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index 45ee205..af46970 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -16,6 +16,7 @@
 
 #include <mach/hardware.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -36,6 +37,8 @@ MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= gesbc9312_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ep93xx/include/mach/entry-macro.S b/arch/arm/mach-ep93xx/include/mach/entry-macro.S
index 96b85e2..9be6edc 100644
--- a/arch/arm/mach-ep93xx/include/mach/entry-macro.S
+++ b/arch/arm/mach-ep93xx/include/mach/entry-macro.S
@@ -9,51 +9,9 @@
  * the Free Software Foundation; either version 2 of the License, or (at
  * your option) any later version.
  */
-#include <mach/ep93xx-regs.h>
 
 		.macro	disable_fiq
 		.endm
 
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
 		.macro  arch_ret_to_user, tmp1, tmp2
 		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\base, =(EP93XX_AHB_VIRT_BASE)
-		orr	\base, \base, #0x000b0000
-		mov	\irqnr, #0
-		ldr	\irqstat, [\base]		@ lower 32 interrupts
-		cmp	\irqstat, #0
-		bne	1001f
-
-		eor	\base, \base, #0x00070000
-		ldr	\irqstat, [\base]		@ upper 32 interrupts
-		cmp	\irqstat, #0
-		beq	1002f
-		mov	\irqnr, #0x20
-
-1001:
-		movs	\tmp, \irqstat, lsl #16
-		movne	\irqstat, \tmp
-		addeq	\irqnr, \irqnr, #16
-
-		movs	\tmp, \irqstat, lsl #8
-		movne	\irqstat, \tmp
-		addeq	\irqnr, \irqnr, #8
-
-		movs	\tmp, \irqstat, lsl #4
-		movne	\irqstat, \tmp
-		addeq	\irqnr, \irqnr, #4
-
-		movs	\tmp, \irqstat, lsl #2
-		movne	\irqstat, \tmp
-		addeq	\irqnr, \irqnr, #2
-
-		movs	\tmp, \irqstat, lsl #1
-		addeq	\irqnr, \irqnr, #1
-		orrs	\base, \base, #1
-
-1002:
-		.endm
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index 5066045..d4c9349 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -66,4 +66,6 @@ void ep93xx_register_ac97(void);
 void ep93xx_init_devices(void);
 extern struct sys_timer ep93xx_timer;
 
+void ep93xx_restart(char, const char *);
+
 #endif
diff --git a/arch/arm/mach-ep93xx/include/mach/system.h b/arch/arm/mach-ep93xx/include/mach/system.h
index 6d661fe..b5bec7c 100644
--- a/arch/arm/mach-ep93xx/include/mach/system.h
+++ b/arch/arm/mach-ep93xx/include/mach/system.h
@@ -1,24 +1,7 @@
 /*
  * arch/arm/mach-ep93xx/include/mach/system.h
  */
-
-#include <mach/hardware.h>
-
 static inline void arch_idle(void)
 {
 	cpu_do_idle();
 }
-
-static inline void arch_reset(char mode, const char *cmd)
-{
-	local_irq_disable();
-
-	/*
-	 * Set then clear the SWRST bit to initiate a software reset
-	 */
-	ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_SWRST);
-	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_SWRST);
-
-	while (1)
-		;
-}
diff --git a/arch/arm/mach-ep93xx/include/mach/vmalloc.h b/arch/arm/mach-ep93xx/include/mach/vmalloc.h
deleted file mode 100644
index 1b3f25d..0000000
--- a/arch/arm/mach-ep93xx/include/mach/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/vmalloc.h
- */
-
-#define VMALLOC_END	0xfe800000UL
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index e72f736..7b98084 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -18,6 +18,7 @@
 
 #include <mach/hardware.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -80,8 +81,10 @@ MACHINE_START(MICRO9, "Contec Micro9-High")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= micro9_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
 
@@ -91,8 +94,10 @@ MACHINE_START(MICRO9M, "Contec Micro9-Mid")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= micro9_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
 
@@ -102,8 +107,10 @@ MACHINE_START(MICRO9L, "Contec Micro9-Lite")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= micro9_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
 
@@ -113,7 +120,9 @@ MACHINE_START(MICRO9S, "Contec Micro9-Slim")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= micro9_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
index 52e090d..f4e553e 100644
--- a/arch/arm/mach-ep93xx/simone.c
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -25,6 +25,7 @@
 #include <mach/fb.h>
 #include <mach/gpio-ep93xx.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -80,6 +81,8 @@ MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= simone_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
index 8121e3a..fd84633 100644
--- a/arch/arm/mach-ep93xx/snappercl15.c
+++ b/arch/arm/mach-ep93xx/snappercl15.c
@@ -31,6 +31,7 @@
 #include <mach/fb.h>
 #include <mach/gpio-ep93xx.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -177,6 +178,8 @@ MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15")
 	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer 		= &ep93xx_timer,
 	.init_machine	= snappercl15_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index 8b2f143..79f8ecf 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -23,6 +23,7 @@
 #include <mach/hardware.h>
 #include <mach/ts72xx.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
@@ -247,6 +248,8 @@ MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
 	.atag_offset	= 0x100,
 	.map_io		= ts72xx_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= ts72xx_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
index d96e4db..03dd401 100644
--- a/arch/arm/mach-ep93xx/vision_ep9307.c
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -361,4 +361,5 @@ MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307")
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= vision_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 724ec0f..e1efbca 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -17,6 +17,8 @@ choice
 
 config ARCH_EXYNOS4
 	bool "SAMSUNG EXYNOS4"
+	select HAVE_SMP
+	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  Samsung EXYNOS4 SoCs based systems
 
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index 59069a3..bcb9efc 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -10,15 +10,17 @@ obj-m				:=
 obj-n				:=
 obj-				:=
 
-# Core support for EXYNOS4 system
+# Core
 
-obj-$(CONFIG_ARCH_EXYNOS4)	+= cpu.o init.o clock.o irq-combiner.o setup-i2c0.o
-obj-$(CONFIG_ARCH_EXYNOS4)	+= irq-eint.o dma.o pmu.o
+obj-$(CONFIG_ARCH_EXYNOS4)	+= common.o clock.o
 obj-$(CONFIG_CPU_EXYNOS4210)	+= clock-exynos4210.o
 obj-$(CONFIG_SOC_EXYNOS4212)	+= clock-exynos4212.o
+
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 
+obj-$(CONFIG_ARCH_EXYNOS4)	+= dma.o pmu.o
+
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
 
 obj-$(CONFIG_EXYNOS4_MCT)	+= mct.o
@@ -45,6 +47,7 @@ obj-$(CONFIG_EXYNOS4_DEV_PD)		+= dev-pd.o
 obj-$(CONFIG_EXYNOS4_DEV_SYSMMU)	+= dev-sysmmu.o
 obj-$(CONFIG_EXYNOS4_DEV_DWMCI)		+= dev-dwmci.o
 
+obj-$(CONFIG_ARCH_EXYNOS4)		+= setup-i2c0.o
 obj-$(CONFIG_EXYNOS4_SETUP_FIMC)	+= setup-fimc.o
 obj-$(CONFIG_EXYNOS4_SETUP_FIMD0)	+= setup-fimd0.o
 obj-$(CONFIG_EXYNOS4_SETUP_I2C1)	+= setup-i2c1.o
diff --git a/arch/arm/mach-exynos/clock-exynos4210.c b/arch/arm/mach-exynos/clock-exynos4210.c
index b9d5ef6..a5823a7 100644
--- a/arch/arm/mach-exynos/clock-exynos4210.c
+++ b/arch/arm/mach-exynos/clock-exynos4210.c
@@ -23,7 +23,6 @@
 #include <plat/pll.h>
 #include <plat/s5p-clock.h>
 #include <plat/clock-clksrc.h>
-#include <plat/exynos4.h>
 #include <plat/pm.h>
 
 #include <mach/hardware.h>
@@ -31,6 +30,8 @@
 #include <mach/regs-clock.h>
 #include <mach/exynos4-clock.h>
 
+#include "common.h"
+
 static struct sleep_save exynos4210_clock_save[] = {
 	SAVE_ITEM(S5P_CLKSRC_IMAGE),
 	SAVE_ITEM(S5P_CLKSRC_LCD1),
diff --git a/arch/arm/mach-exynos/clock-exynos4212.c b/arch/arm/mach-exynos/clock-exynos4212.c
index 77d5dec..26a668b 100644
--- a/arch/arm/mach-exynos/clock-exynos4212.c
+++ b/arch/arm/mach-exynos/clock-exynos4212.c
@@ -23,7 +23,6 @@
 #include <plat/pll.h>
 #include <plat/s5p-clock.h>
 #include <plat/clock-clksrc.h>
-#include <plat/exynos4.h>
 #include <plat/pm.h>
 
 #include <mach/hardware.h>
@@ -31,6 +30,8 @@
 #include <mach/regs-clock.h>
 #include <mach/exynos4-clock.h>
 
+#include "common.h"
+
 static struct sleep_save exynos4212_clock_save[] = {
 	SAVE_ITEM(S5P_CLKSRC_IMAGE),
 	SAVE_ITEM(S5P_CLKDIV_IMAGE),
diff --git a/arch/arm/mach-exynos/clock.c b/arch/arm/mach-exynos/clock.c
index 2894f0a..83616a0 100644
--- a/arch/arm/mach-exynos/clock.c
+++ b/arch/arm/mach-exynos/clock.c
@@ -21,7 +21,6 @@
 #include <plat/pll.h>
 #include <plat/s5p-clock.h>
 #include <plat/clock-clksrc.h>
-#include <plat/exynos4.h>
 #include <plat/pm.h>
 
 #include <mach/map.h>
@@ -29,6 +28,8 @@
 #include <mach/sysmmu.h>
 #include <mach/exynos4-clock.h>
 
+#include "common.h"
+
 static struct sleep_save exynos4_clock_save[] = {
 	SAVE_ITEM(S5P_CLKDIV_LEFTBUS),
 	SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS),
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
new file mode 100644
index 0000000..b6ac6ee
--- /dev/null
+++ b/arch/arm/mach-exynos/common.c
@@ -0,0 +1,714 @@
+/*
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Common Codes for EXYNOS
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/device.h>
+#include <linux/gpio.h>
+#include <linux/sched.h>
+#include <linux/serial_core.h>
+
+#include <asm/proc-fns.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/regs-irq.h>
+#include <mach/regs-pmu.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/pm.h>
+#include <plat/sdhci.h>
+#include <plat/gpio-cfg.h>
+#include <plat/adc-core.h>
+#include <plat/fb-core.h>
+#include <plat/fimc-core.h>
+#include <plat/iic-core.h>
+#include <plat/tv-core.h>
+#include <plat/regs-serial.h>
+
+#include "common.h"
+
+unsigned int gic_bank_offset __read_mostly;
+
+static const char name_exynos4210[] = "EXYNOS4210";
+static const char name_exynos4212[] = "EXYNOS4212";
+static const char name_exynos4412[] = "EXYNOS4412";
+
+static struct cpu_table cpu_ids[] __initdata = {
+	{
+		.idcode		= EXYNOS4210_CPU_ID,
+		.idmask		= EXYNOS4_CPU_MASK,
+		.map_io		= exynos4_map_io,
+		.init_clocks	= exynos4_init_clocks,
+		.init_uarts	= exynos4_init_uarts,
+		.init		= exynos_init,
+		.name		= name_exynos4210,
+	}, {
+		.idcode		= EXYNOS4212_CPU_ID,
+		.idmask		= EXYNOS4_CPU_MASK,
+		.map_io		= exynos4_map_io,
+		.init_clocks	= exynos4_init_clocks,
+		.init_uarts	= exynos4_init_uarts,
+		.init		= exynos_init,
+		.name		= name_exynos4212,
+	}, {
+		.idcode		= EXYNOS4412_CPU_ID,
+		.idmask		= EXYNOS4_CPU_MASK,
+		.map_io		= exynos4_map_io,
+		.init_clocks	= exynos4_init_clocks,
+		.init_uarts	= exynos4_init_uarts,
+		.init		= exynos_init,
+		.name		= name_exynos4412,
+	},
+};
+
+/* Initial IO mappings */
+
+static struct map_desc exynos_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_CHIPID,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_CHIPID),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_SYS,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_SYSCON),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_TIMER,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_TIMER),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_WATCHDOG,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_WATCHDOG),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_SROMC,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_SROMC),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_SYSTIMER,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_SYSTIMER),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_PMU,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_PMU),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_COMBINER_BASE,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_COMBINER),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_GIC_CPU,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_GIC_CPU),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_GIC_DIST,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_GIC_DIST),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_UART,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_UART),
+		.length		= SZ_512K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static struct map_desc exynos4_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_CMU,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_CMU),
+		.length		= SZ_128K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_COREPERI_BASE,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_COREPERI),
+		.length		= SZ_8K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_L2CC,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_L2CC),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_GPIO1,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_GPIO1),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_GPIO2,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_GPIO2),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_GPIO3,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_GPIO3),
+		.length		= SZ_256,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_DMC0,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_DMC0),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_USB_HSPHY,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_HSPHY),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static struct map_desc exynos4_iodesc0[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_SYSRAM,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_SYSRAM0),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static struct map_desc exynos4_iodesc1[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_SYSRAM,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_SYSRAM1),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static void exynos_idle(void)
+{
+	if (!need_resched())
+		cpu_do_idle();
+
+	local_irq_enable();
+}
+
+void exynos4_restart(char mode, const char *cmd)
+{
+	__raw_writel(0x1, S5P_SWRESET);
+}
+
+/*
+ * exynos_map_io
+ *
+ * register the standard cpu IO areas
+ */
+
+void __init exynos_init_io(struct map_desc *mach_desc, int size)
+{
+	/* initialize the io descriptors we need for initialization */
+	iotable_init(exynos_iodesc, ARRAY_SIZE(exynos_iodesc));
+	if (mach_desc)
+		iotable_init(mach_desc, size);
+
+	/* detect cpu id and rev. */
+	s5p_init_cpu(S5P_VA_CHIPID);
+
+	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+}
+
+void __init exynos4_map_io(void)
+{
+	iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
+
+	if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0)
+		iotable_init(exynos4_iodesc0, ARRAY_SIZE(exynos4_iodesc0));
+	else
+		iotable_init(exynos4_iodesc1, ARRAY_SIZE(exynos4_iodesc1));
+
+	/* initialize device information early */
+	exynos4_default_sdhci0();
+	exynos4_default_sdhci1();
+	exynos4_default_sdhci2();
+	exynos4_default_sdhci3();
+
+	s3c_adc_setname("samsung-adc-v3");
+
+	s3c_fimc_setname(0, "exynos4-fimc");
+	s3c_fimc_setname(1, "exynos4-fimc");
+	s3c_fimc_setname(2, "exynos4-fimc");
+	s3c_fimc_setname(3, "exynos4-fimc");
+
+	/* The I2C bus controllers are directly compatible with s3c2440 */
+	s3c_i2c0_setname("s3c2440-i2c");
+	s3c_i2c1_setname("s3c2440-i2c");
+	s3c_i2c2_setname("s3c2440-i2c");
+
+	s5p_fb_setname(0, "exynos4-fb");
+	s5p_hdmi_setname("exynos4-hdmi");
+}
+
+void __init exynos4_init_clocks(int xtal)
+{
+	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+	s3c24xx_register_baseclocks(xtal);
+	s5p_register_clocks(xtal);
+
+	if (soc_is_exynos4210())
+		exynos4210_register_clocks();
+	else if (soc_is_exynos4212() || soc_is_exynos4412())
+		exynos4212_register_clocks();
+
+	exynos4_register_clocks();
+	exynos4_setup_clocks();
+}
+
+#define COMBINER_ENABLE_SET	0x0
+#define COMBINER_ENABLE_CLEAR	0x4
+#define COMBINER_INT_STATUS	0xC
+
+static DEFINE_SPINLOCK(irq_controller_lock);
+
+struct combiner_chip_data {
+	unsigned int irq_offset;
+	unsigned int irq_mask;
+	void __iomem *base;
+};
+
+static struct combiner_chip_data combiner_data[MAX_COMBINER_NR];
+
+static inline void __iomem *combiner_base(struct irq_data *data)
+{
+	struct combiner_chip_data *combiner_data =
+		irq_data_get_irq_chip_data(data);
+
+	return combiner_data->base;
+}
+
+static void combiner_mask_irq(struct irq_data *data)
+{
+	u32 mask = 1 << (data->irq % 32);
+
+	__raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_CLEAR);
+}
+
+static void combiner_unmask_irq(struct irq_data *data)
+{
+	u32 mask = 1 << (data->irq % 32);
+
+	__raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_SET);
+}
+
+static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
+{
+	struct combiner_chip_data *chip_data = irq_get_handler_data(irq);
+	struct irq_chip *chip = irq_get_chip(irq);
+	unsigned int cascade_irq, combiner_irq;
+	unsigned long status;
+
+	chained_irq_enter(chip, desc);
+
+	spin_lock(&irq_controller_lock);
+	status = __raw_readl(chip_data->base + COMBINER_INT_STATUS);
+	spin_unlock(&irq_controller_lock);
+	status &= chip_data->irq_mask;
+
+	if (status == 0)
+		goto out;
+
+	combiner_irq = __ffs(status);
+
+	cascade_irq = combiner_irq + (chip_data->irq_offset & ~31);
+	if (unlikely(cascade_irq >= NR_IRQS))
+		do_bad_IRQ(cascade_irq, desc);
+	else
+		generic_handle_irq(cascade_irq);
+
+ out:
+	chained_irq_exit(chip, desc);
+}
+
+static struct irq_chip combiner_chip = {
+	.name		= "COMBINER",
+	.irq_mask	= combiner_mask_irq,
+	.irq_unmask	= combiner_unmask_irq,
+};
+
+static void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq)
+{
+	if (combiner_nr >= MAX_COMBINER_NR)
+		BUG();
+	if (irq_set_handler_data(irq, &combiner_data[combiner_nr]) != 0)
+		BUG();
+	irq_set_chained_handler(irq, combiner_handle_cascade_irq);
+}
+
+static void __init combiner_init(unsigned int combiner_nr, void __iomem *base,
+			  unsigned int irq_start)
+{
+	unsigned int i;
+
+	if (combiner_nr >= MAX_COMBINER_NR)
+		BUG();
+
+	combiner_data[combiner_nr].base = base;
+	combiner_data[combiner_nr].irq_offset = irq_start;
+	combiner_data[combiner_nr].irq_mask = 0xff << ((combiner_nr % 4) << 3);
+
+	/* Disable all interrupts */
+
+	__raw_writel(combiner_data[combiner_nr].irq_mask,
+		     base + COMBINER_ENABLE_CLEAR);
+
+	/* Setup the Linux IRQ subsystem */
+
+	for (i = irq_start; i < combiner_data[combiner_nr].irq_offset
+				+ MAX_IRQ_IN_COMBINER; i++) {
+		irq_set_chip_and_handler(i, &combiner_chip, handle_level_irq);
+		irq_set_chip_data(i, &combiner_data[combiner_nr]);
+		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+	}
+}
+
+static void exynos4_gic_irq_fix_base(struct irq_data *d)
+{
+	struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
+
+	gic_data->cpu_base = S5P_VA_GIC_CPU +
+			    (gic_bank_offset * smp_processor_id());
+
+	gic_data->dist_base = S5P_VA_GIC_DIST +
+			    (gic_bank_offset * smp_processor_id());
+}
+
+void __init exynos4_init_irq(void)
+{
+	int irq;
+
+	gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
+
+	gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
+	gic_arch_extn.irq_eoi = exynos4_gic_irq_fix_base;
+	gic_arch_extn.irq_unmask = exynos4_gic_irq_fix_base;
+	gic_arch_extn.irq_mask = exynos4_gic_irq_fix_base;
+
+	for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
+
+		combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
+				COMBINER_IRQ(irq, 0));
+		combiner_cascade_irq(irq, IRQ_SPI(irq));
+	}
+
+	/*
+	 * The parameters of s5p_init_irq() are for VIC init.
+	 * Theses parameters should be NULL and 0 because EXYNOS4
+	 * uses GIC instead of VIC.
+	 */
+	s5p_init_irq(NULL, 0);
+}
+
+struct bus_type exynos4_subsys = {
+	.name		= "exynos4-core",
+	.dev_name	= "exynos4-core",
+};
+
+static struct device exynos4_dev = {
+	.bus	= &exynos4_subsys,
+};
+
+static int __init exynos4_core_init(void)
+{
+	return subsys_system_register(&exynos4_subsys, NULL);
+}
+core_initcall(exynos4_core_init);
+
+#ifdef CONFIG_CACHE_L2X0
+static int __init exynos4_l2x0_cache_init(void)
+{
+	/* TAG, Data Latency Control: 2cycle */
+	__raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL);
+
+	if (soc_is_exynos4210())
+		__raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
+	else if (soc_is_exynos4212() || soc_is_exynos4412())
+		__raw_writel(0x120, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
+
+	/* L2X0 Prefetch Control */
+	__raw_writel(0x30000007, S5P_VA_L2CC + L2X0_PREFETCH_CTRL);
+
+	/* L2X0 Power Control */
+	__raw_writel(L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN,
+		     S5P_VA_L2CC + L2X0_POWER_CTRL);
+
+	l2x0_init(S5P_VA_L2CC, 0x7C470001, 0xC200ffff);
+
+	return 0;
+}
+
+early_initcall(exynos4_l2x0_cache_init);
+#endif
+
+int __init exynos_init(void)
+{
+	printk(KERN_INFO "EXYNOS: Initializing architecture\n");
+
+	/* set idle function */
+	pm_idle = exynos_idle;
+
+	return device_register(&exynos4_dev);
+}
+
+static struct s3c24xx_uart_clksrc exynos4_serial_clocks[] = {
+	[0] = {
+		.name		= "uclk1",
+		.divisor	= 1,
+		.min_baud	= 0,
+		.max_baud	= 0,
+	},
+};
+
+/* uart registration process */
+
+void __init exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	struct s3c2410_uartcfg *tcfg = cfg;
+	u32 ucnt;
+
+	for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
+		if (!tcfg->clocks) {
+			tcfg->has_fracval = 1;
+			tcfg->clocks = exynos4_serial_clocks;
+			tcfg->clocks_size = ARRAY_SIZE(exynos4_serial_clocks);
+		}
+		tcfg->flags |= NO_NEED_CHECK_CLKSRC;
+	}
+
+	s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
+}
+
+static DEFINE_SPINLOCK(eint_lock);
+
+static unsigned int eint0_15_data[16];
+
+static unsigned int exynos4_get_irq_nr(unsigned int number)
+{
+	u32 ret = 0;
+
+	switch (number) {
+	case 0 ... 3:
+		ret = (number + IRQ_EINT0);
+		break;
+	case 4 ... 7:
+		ret = (number + (IRQ_EINT4 - 4));
+		break;
+	case 8 ... 15:
+		ret = (number + (IRQ_EINT8 - 8));
+		break;
+	default:
+		printk(KERN_ERR "number available : %d\n", number);
+	}
+
+	return ret;
+}
+
+static inline void exynos4_irq_eint_mask(struct irq_data *data)
+{
+	u32 mask;
+
+	spin_lock(&eint_lock);
+	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+	mask |= eint_irq_to_bit(data->irq);
+	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+	spin_unlock(&eint_lock);
+}
+
+static void exynos4_irq_eint_unmask(struct irq_data *data)
+{
+	u32 mask;
+
+	spin_lock(&eint_lock);
+	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+	mask &= ~(eint_irq_to_bit(data->irq));
+	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+	spin_unlock(&eint_lock);
+}
+
+static inline void exynos4_irq_eint_ack(struct irq_data *data)
+{
+	__raw_writel(eint_irq_to_bit(data->irq),
+		     S5P_EINT_PEND(EINT_REG_NR(data->irq)));
+}
+
+static void exynos4_irq_eint_maskack(struct irq_data *data)
+{
+	exynos4_irq_eint_mask(data);
+	exynos4_irq_eint_ack(data);
+}
+
+static int exynos4_irq_eint_set_type(struct irq_data *data, unsigned int type)
+{
+	int offs = EINT_OFFSET(data->irq);
+	int shift;
+	u32 ctrl, mask;
+	u32 newvalue = 0;
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		newvalue = S5P_IRQ_TYPE_EDGE_RISING;
+		break;
+
+	case IRQ_TYPE_EDGE_FALLING:
+		newvalue = S5P_IRQ_TYPE_EDGE_FALLING;
+		break;
+
+	case IRQ_TYPE_EDGE_BOTH:
+		newvalue = S5P_IRQ_TYPE_EDGE_BOTH;
+		break;
+
+	case IRQ_TYPE_LEVEL_LOW:
+		newvalue = S5P_IRQ_TYPE_LEVEL_LOW;
+		break;
+
+	case IRQ_TYPE_LEVEL_HIGH:
+		newvalue = S5P_IRQ_TYPE_LEVEL_HIGH;
+		break;
+
+	default:
+		printk(KERN_ERR "No such irq type %d", type);
+		return -EINVAL;
+	}
+
+	shift = (offs & 0x7) * 4;
+	mask = 0x7 << shift;
+
+	spin_lock(&eint_lock);
+	ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(data->irq)));
+	ctrl &= ~mask;
+	ctrl |= newvalue << shift;
+	__raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(data->irq)));
+	spin_unlock(&eint_lock);
+
+	switch (offs) {
+	case 0 ... 7:
+		s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE);
+		break;
+	case 8 ... 15:
+		s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE);
+		break;
+	case 16 ... 23:
+		s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE);
+		break;
+	case 24 ... 31:
+		s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE);
+		break;
+	default:
+		printk(KERN_ERR "No such irq number %d", offs);
+	}
+
+	return 0;
+}
+
+static struct irq_chip exynos4_irq_eint = {
+	.name		= "exynos4-eint",
+	.irq_mask	= exynos4_irq_eint_mask,
+	.irq_unmask	= exynos4_irq_eint_unmask,
+	.irq_mask_ack	= exynos4_irq_eint_maskack,
+	.irq_ack	= exynos4_irq_eint_ack,
+	.irq_set_type	= exynos4_irq_eint_set_type,
+#ifdef CONFIG_PM
+	.irq_set_wake	= s3c_irqext_wake,
+#endif
+};
+
+/*
+ * exynos4_irq_demux_eint
+ *
+ * This function demuxes the IRQ from from EINTs 16 to 31.
+ * It is designed to be inlined into the specific handler
+ * s5p_irq_demux_eintX_Y.
+ *
+ * Each EINT pend/mask registers handle eight of them.
+ */
+static inline void exynos4_irq_demux_eint(unsigned int start)
+{
+	unsigned int irq;
+
+	u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start)));
+	u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start)));
+
+	status &= ~mask;
+	status &= 0xff;
+
+	while (status) {
+		irq = fls(status) - 1;
+		generic_handle_irq(irq + start);
+		status &= ~(1 << irq);
+	}
+}
+
+static void exynos4_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_get_chip(irq);
+	chained_irq_enter(chip, desc);
+	exynos4_irq_demux_eint(IRQ_EINT(16));
+	exynos4_irq_demux_eint(IRQ_EINT(24));
+	chained_irq_exit(chip, desc);
+}
+
+static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
+{
+	u32 *irq_data = irq_get_handler_data(irq);
+	struct irq_chip *chip = irq_get_chip(irq);
+
+	chained_irq_enter(chip, desc);
+	chip->irq_mask(&desc->irq_data);
+
+	if (chip->irq_ack)
+		chip->irq_ack(&desc->irq_data);
+
+	generic_handle_irq(*irq_data);
+
+	chip->irq_unmask(&desc->irq_data);
+	chained_irq_exit(chip, desc);
+}
+
+int __init exynos4_init_irq_eint(void)
+{
+	int irq;
+
+	for (irq = 0 ; irq <= 31 ; irq++) {
+		irq_set_chip_and_handler(IRQ_EINT(irq), &exynos4_irq_eint,
+					 handle_level_irq);
+		set_irq_flags(IRQ_EINT(irq), IRQF_VALID);
+	}
+
+	irq_set_chained_handler(IRQ_EINT16_31, exynos4_irq_demux_eint16_31);
+
+	for (irq = 0 ; irq <= 15 ; irq++) {
+		eint0_15_data[irq] = IRQ_EINT(irq);
+
+		irq_set_handler_data(exynos4_get_irq_nr(irq),
+				     &eint0_15_data[irq]);
+		irq_set_chained_handler(exynos4_get_irq_nr(irq),
+					exynos4_irq_eint0_15);
+	}
+
+	return 0;
+}
+arch_initcall(exynos4_init_irq_eint);
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
new file mode 100644
index 0000000..1ac49de
--- /dev/null
+++ b/arch/arm/mach-exynos/common.h
@@ -0,0 +1,41 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Common Header for EXYNOS machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H
+#define __ARCH_ARM_MACH_EXYNOS_COMMON_H
+
+void exynos_init_io(struct map_desc *mach_desc, int size);
+void exynos4_init_irq(void);
+
+void exynos4_register_clocks(void);
+void exynos4_setup_clocks(void);
+
+void exynos4210_register_clocks(void);
+void exynos4212_register_clocks(void);
+
+void exynos4_restart(char mode, const char *cmd);
+
+extern struct sys_timer exynos4_timer;
+
+#ifdef CONFIG_ARCH_EXYNOS
+extern  int exynos_init(void);
+extern void exynos4_map_io(void);
+extern void exynos4_init_clocks(int xtal);
+extern void exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+#else
+#define exynos4_init_clocks NULL
+#define exynos4_init_uarts NULL
+#define exynos4_map_io NULL
+#define exynos_init NULL
+#endif
+
+#endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */
diff --git a/arch/arm/mach-exynos/cpu.c b/arch/arm/mach-exynos/cpu.c
deleted file mode 100644
index 90ec247..0000000
--- a/arch/arm/mach-exynos/cpu.c
+++ /dev/null
@@ -1,298 +0,0 @@
-/* linux/arch/arm/mach-exynos/cpu.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/sched.h>
-#include <linux/sysdev.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/proc-fns.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/hardware/gic.h>
-
-#include <plat/cpu.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/exynos4.h>
-#include <plat/adc-core.h>
-#include <plat/sdhci.h>
-#include <plat/fb-core.h>
-#include <plat/fimc-core.h>
-#include <plat/iic-core.h>
-#include <plat/reset.h>
-#include <plat/tv-core.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-pmu.h>
-
-unsigned int gic_bank_offset __read_mostly;
-
-extern int combiner_init(unsigned int combiner_nr, void __iomem *base,
-			 unsigned int irq_start);
-extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq);
-
-/* Initial IO mappings */
-static struct map_desc exynos_iodesc[] __initdata = {
-	{
-		.virtual	= (unsigned long)S5P_VA_SYSTIMER,
-		.pfn		= __phys_to_pfn(EXYNOS_PA_SYSTIMER),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_PMU,
-		.pfn		= __phys_to_pfn(EXYNOS_PA_PMU),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_COMBINER_BASE,
-		.pfn		= __phys_to_pfn(EXYNOS_PA_COMBINER),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_GIC_CPU,
-		.pfn		= __phys_to_pfn(EXYNOS_PA_GIC_CPU),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_GIC_DIST,
-		.pfn		= __phys_to_pfn(EXYNOS_PA_GIC_DIST),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_UART,
-		.pfn		= __phys_to_pfn(S3C_PA_UART),
-		.length		= SZ_512K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static struct map_desc exynos4_iodesc[] __initdata = {
-	{
-		.virtual	= (unsigned long)S5P_VA_CMU,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_CMU),
-		.length		= SZ_128K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_COREPERI_BASE,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_COREPERI),
-		.length		= SZ_8K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_L2CC,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_L2CC),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_GPIO1,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_GPIO1),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_GPIO2,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_GPIO2),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_GPIO3,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_GPIO3),
-		.length		= SZ_256,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_DMC0,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_DMC0),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_SROMC,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_SROMC),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_USB_HSPHY,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_HSPHY),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static struct map_desc exynos4_iodesc0[] __initdata = {
-	{
-		.virtual	= (unsigned long)S5P_VA_SYSRAM,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_SYSRAM0),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static struct map_desc exynos4_iodesc1[] __initdata = {
-	{
-		.virtual	= (unsigned long)S5P_VA_SYSRAM,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_SYSRAM1),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static void exynos_idle(void)
-{
-	if (!need_resched())
-		cpu_do_idle();
-
-	local_irq_enable();
-}
-
-static void exynos4_sw_reset(void)
-{
-	__raw_writel(0x1, S5P_SWRESET);
-}
-
-/*
- * exynos_map_io
- *
- * register the standard cpu IO areas
- */
-void __init exynos4_map_io(void)
-{
-	iotable_init(exynos_iodesc, ARRAY_SIZE(exynos_iodesc));
-	iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
-
-	if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0)
-		iotable_init(exynos4_iodesc0, ARRAY_SIZE(exynos4_iodesc0));
-	else
-		iotable_init(exynos4_iodesc1, ARRAY_SIZE(exynos4_iodesc1));
-
-	/* initialize device information early */
-	exynos4_default_sdhci0();
-	exynos4_default_sdhci1();
-	exynos4_default_sdhci2();
-	exynos4_default_sdhci3();
-
-	s3c_adc_setname("samsung-adc-v3");
-
-	s3c_fimc_setname(0, "exynos4-fimc");
-	s3c_fimc_setname(1, "exynos4-fimc");
-	s3c_fimc_setname(2, "exynos4-fimc");
-	s3c_fimc_setname(3, "exynos4-fimc");
-
-	/* The I2C bus controllers are directly compatible with s3c2440 */
-	s3c_i2c0_setname("s3c2440-i2c");
-	s3c_i2c1_setname("s3c2440-i2c");
-	s3c_i2c2_setname("s3c2440-i2c");
-
-	s5p_fb_setname(0, "exynos4-fb");
-	s5p_hdmi_setname("exynos4-hdmi");
-}
-
-void __init exynos4_init_clocks(int xtal)
-{
-	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
-	s3c24xx_register_baseclocks(xtal);
-	s5p_register_clocks(xtal);
-
-	if (soc_is_exynos4210())
-		exynos4210_register_clocks();
-	else if (soc_is_exynos4212() || soc_is_exynos4412())
-		exynos4212_register_clocks();
-
-	exynos4_register_clocks();
-	exynos4_setup_clocks();
-}
-
-static void exynos4_gic_irq_fix_base(struct irq_data *d)
-{
-	struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
-
-	gic_data->cpu_base = S5P_VA_GIC_CPU +
-			    (gic_bank_offset * smp_processor_id());
-
-	gic_data->dist_base = S5P_VA_GIC_DIST +
-			    (gic_bank_offset * smp_processor_id());
-}
-
-void __init exynos4_init_irq(void)
-{
-	int irq;
-
-	gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
-
-	gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
-	gic_arch_extn.irq_eoi = exynos4_gic_irq_fix_base;
-	gic_arch_extn.irq_unmask = exynos4_gic_irq_fix_base;
-	gic_arch_extn.irq_mask = exynos4_gic_irq_fix_base;
-
-	for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
-
-		combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
-				COMBINER_IRQ(irq, 0));
-		combiner_cascade_irq(irq, IRQ_SPI(irq));
-	}
-
-	/* The parameters of s5p_init_irq() are for VIC init.
-	 * Theses parameters should be NULL and 0 because EXYNOS4
-	 * uses GIC instead of VIC.
-	 */
-	s5p_init_irq(NULL, 0);
-}
-
-struct sysdev_class exynos4_sysclass = {
-	.name	= "exynos4-core",
-};
-
-static struct sys_device exynos4_sysdev = {
-	.cls	= &exynos4_sysclass,
-};
-
-static int __init exynos4_core_init(void)
-{
-	return sysdev_class_register(&exynos4_sysclass);
-}
-core_initcall(exynos4_core_init);
-
-#ifdef CONFIG_CACHE_L2X0
-static int __init exynos4_l2x0_cache_init(void)
-{
-	/* TAG, Data Latency Control: 2cycle */
-	__raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL);
-
-	if (soc_is_exynos4210())
-		__raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
-	else if (soc_is_exynos4212() || soc_is_exynos4412())
-		__raw_writel(0x120, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
-
-	/* L2X0 Prefetch Control */
-	__raw_writel(0x30000007, S5P_VA_L2CC + L2X0_PREFETCH_CTRL);
-
-	/* L2X0 Power Control */
-	__raw_writel(L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN,
-		     S5P_VA_L2CC + L2X0_POWER_CTRL);
-
-	l2x0_init(S5P_VA_L2CC, 0x7C470001, 0xC200ffff);
-
-	return 0;
-}
-
-early_initcall(exynos4_l2x0_cache_init);
-#endif
-
-int __init exynos_init(void)
-{
-	printk(KERN_INFO "EXYNOS: Initializing architecture\n");
-
-	/* set idle function */
-	pm_idle = exynos_idle;
-
-	/* set sw_reset function */
-	if (soc_is_exynos4210() || soc_is_exynos4212() || soc_is_exynos4412())
-		s5p_reset_hook = exynos4_sw_reset;
-
-	return sysdev_register(&exynos4_sysdev);
-}
diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c
index 35f6502..4ebb382 100644
--- a/arch/arm/mach-exynos/cpuidle.c
+++ b/arch/arm/mach-exynos/cpuidle.c
@@ -12,6 +12,8 @@
 #include <linux/init.h>
 #include <linux/cpuidle.h>
 #include <linux/io.h>
+#include <linux/export.h>
+#include <linux/time.h>
 
 #include <asm/proc-fns.h>
 
diff --git a/arch/arm/mach-exynos/include/mach/entry-macro.S b/arch/arm/mach-exynos/include/mach/entry-macro.S
index f5e9fd8..3ba4f54 100644
--- a/arch/arm/mach-exynos/include/mach/entry-macro.S
+++ b/arch/arm/mach-exynos/include/mach/entry-macro.S
@@ -9,83 +9,8 @@
  * warranty of any kind, whether express or implied.
 */
 
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <asm/hardware/gic.h>
-
 		.macro	disable_fiq
 		.endm
 
-		.macro  get_irqnr_preamble, base, tmp
-		mov	\tmp, #0
-
-		mrc	p15, 0, \base, c0, c0, 5
-		and	\base, \base, #3
-		cmp	\base, #0
-		beq	1f
-
-		ldr	\tmp, =gic_bank_offset
-		ldr	\tmp, [\tmp]
-		cmp	\base, #1
-		beq	1f
-
-		cmp	\base, #2
-		addeq	\tmp, \tmp, \tmp
-		addne	\tmp, \tmp, \tmp, LSL #1
-
-1:		ldr	\base, =gic_cpu_base_addr
-		ldr	\base, [\base]
-		add	\base, \base, \tmp
-		.endm
-
 		.macro  arch_ret_to_user, tmp1, tmp2
 		.endm
-
-		/*
-		 * The interrupt numbering scheme is defined in the
-		 * interrupt controller spec.  To wit:
-		 *
-		 * Interrupts 0-15 are IPI
-		 * 16-28 are reserved
-		 * 29-31 are local.  We allow 30 to be used for the watchdog.
-		 * 32-1020 are global
-		 * 1021-1022 are reserved
-		 * 1023 is "spurious" (no interrupt)
-		 *
-		 * For now, we ignore all local interrupts so only return an interrupt if it's
-		 * between 30 and 1020.  The test_for_ipi routine below will pick up on IPIs.
-		 *
-		 * A simple read from the controller will tell us the number of the highest
-                 * priority enabled interrupt.  We then just need to check whether it is in the
-		 * valid range for an IRQ (30-1020 inclusive).
-		 */
-
-		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-		ldr     \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
-
-		ldr	\tmp, =1021
-
-		bic     \irqnr, \irqstat, #0x1c00
-
-		cmp     \irqnr, #15
-		cmpcc	\irqnr, \irqnr
-		cmpne	\irqnr, \tmp
-		cmpcs	\irqnr, \irqnr
-		addne	\irqnr, \irqnr, #32
-
-		.endm
-
-		/* We assume that irqstat (the raw value of the IRQ acknowledge
-		 * register) is preserved from the macro above.
-		 * If there is an IPI, we immediately signal end of interrupt on the
-		 * controller, since this requires the original irqstat value which
-		 * we won't easily be able to recreate later.
-		 */
-
-		.macro test_for_ipi, irqnr, irqstat, base, tmp
-		bic	\irqnr, \irqstat, #0x1c00
-		cmp	\irqnr, #16
-		strcc	\irqstat, [\base, #GIC_CPU_EOI]
-		cmpcs	\irqnr, \irqnr
-		.endm
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index 058541d..d182986 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -149,7 +149,6 @@
 #define S3C_PA_WDT			EXYNOS4_PA_WATCHDOG
 #define S3C_PA_UART			EXYNOS4_PA_UART
 
-#define S5P_PA_CHIPID			EXYNOS4_PA_CHIPID
 #define S5P_PA_EHCI			EXYNOS4_PA_EHCI
 #define S5P_PA_FIMC0			EXYNOS4_PA_FIMC0
 #define S5P_PA_FIMC1			EXYNOS4_PA_FIMC1
@@ -166,26 +165,17 @@
 #define S5P_PA_ONENAND_DMA		EXYNOS4_PA_ONENAND_DMA
 #define S5P_PA_SDO			EXYNOS4_PA_SDO
 #define S5P_PA_SDRAM			EXYNOS4_PA_SDRAM
-#define S5P_PA_SROMC			EXYNOS4_PA_SROMC
-#define S5P_PA_SYSCON			EXYNOS4_PA_SYSCON
-#define S5P_PA_TIMER			EXYNOS4_PA_TIMER
 #define S5P_PA_VP			EXYNOS4_PA_VP
 
 #define SAMSUNG_PA_ADC			EXYNOS4_PA_ADC
 #define SAMSUNG_PA_ADC1			EXYNOS4_PA_ADC1
 #define SAMSUNG_PA_KEYPAD		EXYNOS4_PA_KEYPAD
 
-#define EXYNOS_PA_COMBINER		EXYNOS4_PA_COMBINER
-#define EXYNOS_PA_GIC_CPU		EXYNOS4_PA_GIC_CPU
-#define EXYNOS_PA_GIC_DIST		EXYNOS4_PA_GIC_DIST
-#define EXYNOS_PA_PMU			EXYNOS4_PA_PMU
-#define EXYNOS_PA_SYSTIMER		EXYNOS4_PA_SYSTIMER
-
 /* Compatibility UART */
 
 #define S3C_VA_UARTx(x)			(S3C_VA_UART + ((x) * S3C_UART_OFFSET))
 
-#define S5P_PA_UART(x)			(S3C_PA_UART + ((x) * S3C_UART_OFFSET))
+#define S5P_PA_UART(x)			(EXYNOS4_PA_UART + ((x) * S3C_UART_OFFSET))
 #define S5P_PA_UART0			S5P_PA_UART(0)
 #define S5P_PA_UART1			S5P_PA_UART(1)
 #define S5P_PA_UART2			S5P_PA_UART(2)
diff --git a/arch/arm/mach-exynos/include/mach/system.h b/arch/arm/mach-exynos/include/mach/system.h
index 5e3220c..0063a6d 100644
--- a/arch/arm/mach-exynos/include/mach/system.h
+++ b/arch/arm/mach-exynos/include/mach/system.h
@@ -13,8 +13,6 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H __FILE__
 
-#include <plat/system-reset.h>
-
 static void arch_idle(void)
 {
 	/* nothing here yet */
diff --git a/arch/arm/mach-exynos/include/mach/vmalloc.h b/arch/arm/mach-exynos/include/mach/vmalloc.h
deleted file mode 100644
index 284330e..0000000
--- a/arch/arm/mach-exynos/include/mach/vmalloc.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/vmalloc.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
- *
- * Based on arch/arm/mach-s5p6440/include/mach/vmalloc.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * EXYNOS4 vmalloc definition
-*/
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H __FILE__
-
-#define VMALLOC_END	0xF6000000UL
-
-#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-exynos/init.c b/arch/arm/mach-exynos/init.c
deleted file mode 100644
index a8a83e3..0000000
--- a/arch/arm/mach-exynos/init.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/* linux/arch/arm/mach-exynos4/init.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/serial_core.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/regs-serial.h>
-
-static struct s3c24xx_uart_clksrc exynos4_serial_clocks[] = {
-	[0] = {
-		.name		= "uclk1",
-		.divisor	= 1,
-		.min_baud	= 0,
-		.max_baud	= 0,
-	},
-};
-
-/* uart registration process */
-void __init exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	struct s3c2410_uartcfg *tcfg = cfg;
-	u32 ucnt;
-
-	for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
-		if (!tcfg->clocks) {
-			tcfg->has_fracval = 1;
-			tcfg->clocks = exynos4_serial_clocks;
-			tcfg->clocks_size = ARRAY_SIZE(exynos4_serial_clocks);
-		}
-		tcfg->flags |= NO_NEED_CHECK_CLKSRC;
-	}
-
-	s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
-}
diff --git a/arch/arm/mach-exynos/irq-combiner.c b/arch/arm/mach-exynos/irq-combiner.c
deleted file mode 100644
index 5a2758a..0000000
--- a/arch/arm/mach-exynos/irq-combiner.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/* linux/arch/arm/mach-exynos4/irq-combiner.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Based on arch/arm/common/gic.c
- *
- * IRQ COMBINER support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/io.h>
-
-#include <asm/mach/irq.h>
-
-#define COMBINER_ENABLE_SET	0x0
-#define COMBINER_ENABLE_CLEAR	0x4
-#define COMBINER_INT_STATUS	0xC
-
-static DEFINE_SPINLOCK(irq_controller_lock);
-
-struct combiner_chip_data {
-	unsigned int irq_offset;
-	unsigned int irq_mask;
-	void __iomem *base;
-};
-
-static struct combiner_chip_data combiner_data[MAX_COMBINER_NR];
-
-static inline void __iomem *combiner_base(struct irq_data *data)
-{
-	struct combiner_chip_data *combiner_data =
-		irq_data_get_irq_chip_data(data);
-
-	return combiner_data->base;
-}
-
-static void combiner_mask_irq(struct irq_data *data)
-{
-	u32 mask = 1 << (data->irq % 32);
-
-	__raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_CLEAR);
-}
-
-static void combiner_unmask_irq(struct irq_data *data)
-{
-	u32 mask = 1 << (data->irq % 32);
-
-	__raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_SET);
-}
-
-static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
-{
-	struct combiner_chip_data *chip_data = irq_get_handler_data(irq);
-	struct irq_chip *chip = irq_get_chip(irq);
-	unsigned int cascade_irq, combiner_irq;
-	unsigned long status;
-
-	chained_irq_enter(chip, desc);
-
-	spin_lock(&irq_controller_lock);
-	status = __raw_readl(chip_data->base + COMBINER_INT_STATUS);
-	spin_unlock(&irq_controller_lock);
-	status &= chip_data->irq_mask;
-
-	if (status == 0)
-		goto out;
-
-	combiner_irq = __ffs(status);
-
-	cascade_irq = combiner_irq + (chip_data->irq_offset & ~31);
-	if (unlikely(cascade_irq >= NR_IRQS))
-		do_bad_IRQ(cascade_irq, desc);
-	else
-		generic_handle_irq(cascade_irq);
-
- out:
-	chained_irq_exit(chip, desc);
-}
-
-static struct irq_chip combiner_chip = {
-	.name		= "COMBINER",
-	.irq_mask	= combiner_mask_irq,
-	.irq_unmask	= combiner_unmask_irq,
-};
-
-void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq)
-{
-	if (combiner_nr >= MAX_COMBINER_NR)
-		BUG();
-	if (irq_set_handler_data(irq, &combiner_data[combiner_nr]) != 0)
-		BUG();
-	irq_set_chained_handler(irq, combiner_handle_cascade_irq);
-}
-
-void __init combiner_init(unsigned int combiner_nr, void __iomem *base,
-			  unsigned int irq_start)
-{
-	unsigned int i;
-
-	if (combiner_nr >= MAX_COMBINER_NR)
-		BUG();
-
-	combiner_data[combiner_nr].base = base;
-	combiner_data[combiner_nr].irq_offset = irq_start;
-	combiner_data[combiner_nr].irq_mask = 0xff << ((combiner_nr % 4) << 3);
-
-	/* Disable all interrupts */
-
-	__raw_writel(combiner_data[combiner_nr].irq_mask,
-		     base + COMBINER_ENABLE_CLEAR);
-
-	/* Setup the Linux IRQ subsystem */
-
-	for (i = irq_start; i < combiner_data[combiner_nr].irq_offset
-				+ MAX_IRQ_IN_COMBINER; i++) {
-		irq_set_chip_and_handler(i, &combiner_chip, handle_level_irq);
-		irq_set_chip_data(i, &combiner_data[combiner_nr]);
-		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
-	}
-}
diff --git a/arch/arm/mach-exynos/irq-eint.c b/arch/arm/mach-exynos/irq-eint.c
deleted file mode 100644
index badb8c6..0000000
--- a/arch/arm/mach-exynos/irq-eint.c
+++ /dev/null
@@ -1,237 +0,0 @@
-/* linux/arch/arm/mach-exynos4/irq-eint.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4 - IRQ EINT support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/sysdev.h>
-#include <linux/gpio.h>
-
-#include <plat/pm.h>
-#include <plat/cpu.h>
-#include <plat/gpio-cfg.h>
-
-#include <mach/regs-gpio.h>
-
-#include <asm/mach/irq.h>
-
-static DEFINE_SPINLOCK(eint_lock);
-
-static unsigned int eint0_15_data[16];
-
-static unsigned int exynos4_get_irq_nr(unsigned int number)
-{
-	u32 ret = 0;
-
-	switch (number) {
-	case 0 ... 3:
-		ret = (number + IRQ_EINT0);
-		break;
-	case 4 ... 7:
-		ret = (number + (IRQ_EINT4 - 4));
-		break;
-	case 8 ... 15:
-		ret = (number + (IRQ_EINT8 - 8));
-		break;
-	default:
-		printk(KERN_ERR "number available : %d\n", number);
-	}
-
-	return ret;
-}
-
-static inline void exynos4_irq_eint_mask(struct irq_data *data)
-{
-	u32 mask;
-
-	spin_lock(&eint_lock);
-	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
-	mask |= eint_irq_to_bit(data->irq);
-	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
-	spin_unlock(&eint_lock);
-}
-
-static void exynos4_irq_eint_unmask(struct irq_data *data)
-{
-	u32 mask;
-
-	spin_lock(&eint_lock);
-	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
-	mask &= ~(eint_irq_to_bit(data->irq));
-	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
-	spin_unlock(&eint_lock);
-}
-
-static inline void exynos4_irq_eint_ack(struct irq_data *data)
-{
-	__raw_writel(eint_irq_to_bit(data->irq),
-		     S5P_EINT_PEND(EINT_REG_NR(data->irq)));
-}
-
-static void exynos4_irq_eint_maskack(struct irq_data *data)
-{
-	exynos4_irq_eint_mask(data);
-	exynos4_irq_eint_ack(data);
-}
-
-static int exynos4_irq_eint_set_type(struct irq_data *data, unsigned int type)
-{
-	int offs = EINT_OFFSET(data->irq);
-	int shift;
-	u32 ctrl, mask;
-	u32 newvalue = 0;
-
-	switch (type) {
-	case IRQ_TYPE_EDGE_RISING:
-		newvalue = S5P_IRQ_TYPE_EDGE_RISING;
-		break;
-
-	case IRQ_TYPE_EDGE_FALLING:
-		newvalue = S5P_IRQ_TYPE_EDGE_FALLING;
-		break;
-
-	case IRQ_TYPE_EDGE_BOTH:
-		newvalue = S5P_IRQ_TYPE_EDGE_BOTH;
-		break;
-
-	case IRQ_TYPE_LEVEL_LOW:
-		newvalue = S5P_IRQ_TYPE_LEVEL_LOW;
-		break;
-
-	case IRQ_TYPE_LEVEL_HIGH:
-		newvalue = S5P_IRQ_TYPE_LEVEL_HIGH;
-		break;
-
-	default:
-		printk(KERN_ERR "No such irq type %d", type);
-		return -EINVAL;
-	}
-
-	shift = (offs & 0x7) * 4;
-	mask = 0x7 << shift;
-
-	spin_lock(&eint_lock);
-	ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(data->irq)));
-	ctrl &= ~mask;
-	ctrl |= newvalue << shift;
-	__raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(data->irq)));
-	spin_unlock(&eint_lock);
-
-	switch (offs) {
-	case 0 ... 7:
-		s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE);
-		break;
-	case 8 ... 15:
-		s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE);
-		break;
-	case 16 ... 23:
-		s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE);
-		break;
-	case 24 ... 31:
-		s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE);
-		break;
-	default:
-		printk(KERN_ERR "No such irq number %d", offs);
-	}
-
-	return 0;
-}
-
-static struct irq_chip exynos4_irq_eint = {
-	.name		= "exynos4-eint",
-	.irq_mask	= exynos4_irq_eint_mask,
-	.irq_unmask	= exynos4_irq_eint_unmask,
-	.irq_mask_ack	= exynos4_irq_eint_maskack,
-	.irq_ack	= exynos4_irq_eint_ack,
-	.irq_set_type	= exynos4_irq_eint_set_type,
-#ifdef CONFIG_PM
-	.irq_set_wake	= s3c_irqext_wake,
-#endif
-};
-
-/* exynos4_irq_demux_eint
- *
- * This function demuxes the IRQ from from EINTs 16 to 31.
- * It is designed to be inlined into the specific handler
- * s5p_irq_demux_eintX_Y.
- *
- * Each EINT pend/mask registers handle eight of them.
- */
-static inline void exynos4_irq_demux_eint(unsigned int start)
-{
-	unsigned int irq;
-
-	u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start)));
-	u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start)));
-
-	status &= ~mask;
-	status &= 0xff;
-
-	while (status) {
-		irq = fls(status) - 1;
-		generic_handle_irq(irq + start);
-		status &= ~(1 << irq);
-	}
-}
-
-static void exynos4_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
-{
-	struct irq_chip *chip = irq_get_chip(irq);
-	chained_irq_enter(chip, desc);
-	exynos4_irq_demux_eint(IRQ_EINT(16));
-	exynos4_irq_demux_eint(IRQ_EINT(24));
-	chained_irq_exit(chip, desc);
-}
-
-static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
-{
-	u32 *irq_data = irq_get_handler_data(irq);
-	struct irq_chip *chip = irq_get_chip(irq);
-
-	chained_irq_enter(chip, desc);
-	chip->irq_mask(&desc->irq_data);
-
-	if (chip->irq_ack)
-		chip->irq_ack(&desc->irq_data);
-
-	generic_handle_irq(*irq_data);
-
-	chip->irq_unmask(&desc->irq_data);
-	chained_irq_exit(chip, desc);
-}
-
-int __init exynos4_init_irq_eint(void)
-{
-	int irq;
-
-	for (irq = 0 ; irq <= 31 ; irq++) {
-		irq_set_chip_and_handler(IRQ_EINT(irq), &exynos4_irq_eint,
-					 handle_level_irq);
-		set_irq_flags(IRQ_EINT(irq), IRQF_VALID);
-	}
-
-	irq_set_chained_handler(IRQ_EINT16_31, exynos4_irq_demux_eint16_31);
-
-	for (irq = 0 ; irq <= 15 ; irq++) {
-		eint0_15_data[irq] = IRQ_EINT(irq);
-
-		irq_set_handler_data(exynos4_get_irq_nr(irq),
-				     &eint0_15_data[irq]);
-		irq_set_chained_handler(exynos4_get_irq_nr(irq),
-					exynos4_irq_eint0_15);
-	}
-
-	return 0;
-}
-
-arch_initcall(exynos4_init_irq_eint);
diff --git a/arch/arm/mach-exynos/mach-armlex4210.c b/arch/arm/mach-exynos/mach-armlex4210.c
index f0ca6c1..d726fcd 100644
--- a/arch/arm/mach-exynos/mach-armlex4210.c
+++ b/arch/arm/mach-exynos/mach-armlex4210.c
@@ -16,11 +16,11 @@
 #include <linux/smsc911x.h>
 
 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
-#include <plat/exynos4.h>
 #include <plat/gpio-cfg.h>
 #include <plat/regs-serial.h>
 #include <plat/regs-srom.h>
@@ -28,6 +28,8 @@
 
 #include <mach/map.h>
 
+#include "common.h"
+
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define ARMLEX4210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
@@ -187,7 +189,7 @@ static void __init armlex4210_smsc911x_init(void)
 
 static void __init armlex4210_map_io(void)
 {
-	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	exynos_init_io(NULL, 0);
 	s3c24xx_init_clocks(24000000);
 	s3c24xx_init_uarts(armlex4210_uartcfgs,
 			   ARRAY_SIZE(armlex4210_uartcfgs));
@@ -210,6 +212,8 @@ MACHINE_START(ARMLEX4210, "ARMLEX4210")
 	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= armlex4210_map_io,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= armlex4210_machine_init,
 	.timer		= &exynos4_timer,
+	.restart	= exynos4_restart,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index 236bbe1..635fb97 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -32,12 +32,12 @@
 #include <media/v4l2-mediabus.h>
 
 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <plat/adc.h>
 #include <plat/regs-fb-v4.h>
 #include <plat/regs-serial.h>
-#include <plat/exynos4.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/fb.h>
@@ -54,6 +54,8 @@
 
 #include <mach/map.h>
 
+#include "common.h"
+
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define NURI_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
@@ -1283,7 +1285,7 @@ static struct platform_device *nuri_devices[] __initdata = {
 
 static void __init nuri_map_io(void)
 {
-	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	exynos_init_io(NULL, 0);
 	s3c24xx_init_clocks(24000000);
 	s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs));
 }
@@ -1333,7 +1335,9 @@ MACHINE_START(NURI, "NURI")
 	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= nuri_map_io,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= nuri_machine_init,
 	.timer		= &exynos4_timer,
 	.reserve        = &nuri_reserve,
+	.restart	= exynos4_restart,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index f80b563..586eb99 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -22,13 +22,13 @@
 #include <linux/lcd.h>
 
 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <video/platform_lcd.h>
 
 #include <plat/regs-serial.h>
 #include <plat/regs-fb-v4.h>
-#include <plat/exynos4.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/sdhci.h>
@@ -43,6 +43,8 @@
 
 #include <mach/map.h>
 
+#include "common.h"
+
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define ORIGEN_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
@@ -638,7 +640,7 @@ static void s5p_tv_setup(void)
 
 static void __init origen_map_io(void)
 {
-	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	exynos_init_io(NULL, 0);
 	s3c24xx_init_clocks(24000000);
 	s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
 }
@@ -694,7 +696,9 @@ MACHINE_START(ORIGEN, "ORIGEN")
 	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= origen_map_io,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= origen_machine_init,
 	.timer		= &exynos4_timer,
 	.reserve	= &origen_reserve,
+	.restart	= exynos4_restart,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c
index fcf2e0e..d00e4f0 100644
--- a/arch/arm/mach-exynos/mach-smdk4x12.c
+++ b/arch/arm/mach-exynos/mach-smdk4x12.c
@@ -21,13 +21,13 @@
 #include <linux/serial_core.h>
 
 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <plat/backlight.h>
 #include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
-#include <plat/exynos4.h>
 #include <plat/gpio-cfg.h>
 #include <plat/iic.h>
 #include <plat/keypad.h>
@@ -36,6 +36,8 @@
 
 #include <mach/map.h>
 
+#include "common.h"
+
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define SMDK4X12_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
@@ -249,7 +251,7 @@ static void __init smdk4x12_map_io(void)
 {
 	clk_xusbxti.rate = 24000000;
 
-	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	exynos_init_io(NULL, 0);
 	s3c24xx_init_clocks(clk_xusbxti.rate);
 	s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs));
 }
@@ -287,8 +289,10 @@ MACHINE_START(SMDK4212, "SMDK4212")
 	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= smdk4x12_map_io,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= smdk4x12_machine_init,
 	.timer		= &exynos4_timer,
+	.restart	= exynos4_restart,
 MACHINE_END
 
 MACHINE_START(SMDK4412, "SMDK4412")
@@ -297,6 +301,8 @@ MACHINE_START(SMDK4412, "SMDK4412")
 	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= smdk4x12_map_io,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= smdk4x12_machine_init,
 	.timer		= &exynos4_timer,
+	.restart	= exynos4_restart,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c
index cec2afa..5b36561 100644
--- a/arch/arm/mach-exynos/mach-smdkv310.c
+++ b/arch/arm/mach-exynos/mach-smdkv310.c
@@ -21,13 +21,13 @@
 #include <linux/pwm_backlight.h>
 
 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <video/platform_lcd.h>
 #include <plat/regs-serial.h>
 #include <plat/regs-srom.h>
 #include <plat/regs-fb-v4.h>
-#include <plat/exynos4.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/fb.h>
@@ -43,6 +43,8 @@
 
 #include <mach/map.h>
 
+#include "common.h"
+
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define SMDKV310_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
@@ -332,7 +334,7 @@ static void s5p_tv_setup(void)
 
 static void __init smdkv310_map_io(void)
 {
-	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	exynos_init_io(NULL, 0);
 	s3c24xx_init_clocks(24000000);
 	s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs));
 }
@@ -375,9 +377,11 @@ MACHINE_START(SMDKV310, "SMDKV310")
 	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= smdkv310_map_io,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= smdkv310_machine_init,
 	.timer		= &exynos4_timer,
 	.reserve	= &smdkv310_reserve,
+	.restart	= exynos4_restart,
 MACHINE_END
 
 MACHINE_START(SMDKC210, "SMDKC210")
@@ -385,6 +389,8 @@ MACHINE_START(SMDKC210, "SMDKC210")
 	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= smdkv310_map_io,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= smdkv310_machine_init,
 	.timer		= &exynos4_timer,
+	.restart	= exynos4_restart,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index a2a177f..52aea97 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -24,10 +24,10 @@
 #include <linux/i2c/atmel_mxt_ts.h>
 
 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
-#include <plat/exynos4.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/iic.h>
@@ -47,6 +47,8 @@
 #include <media/s5p_fimc.h>
 #include <media/m5mols.h>
 
+#include "common.h"
+
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define UNIVERSAL_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
@@ -992,7 +994,7 @@ static struct platform_device *universal_devices[] __initdata = {
 
 static void __init universal_map_io(void)
 {
-	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	exynos_init_io(NULL, 0);
 	s3c24xx_init_clocks(24000000);
 	s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
 }
@@ -1058,7 +1060,9 @@ MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
 	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= universal_map_io,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= universal_machine_init,
 	.timer		= &exynos4_timer,
 	.reserve        = &universal_reserve,
+	.restart	= exynos4_restart,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mct.c b/arch/arm/mach-exynos/mct.c
index 97343df..85b5527 100644
--- a/arch/arm/mach-exynos/mct.c
+++ b/arch/arm/mach-exynos/mct.c
@@ -44,8 +44,6 @@ struct mct_clock_event_device {
 	char name[10];
 };
 
-static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick);
-
 static void exynos4_mct_write(unsigned int value, void *addr)
 {
 	void __iomem *stat_addr;
@@ -264,6 +262,9 @@ static void exynos4_clockevent_init(void)
 }
 
 #ifdef CONFIG_LOCAL_TIMERS
+
+static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick);
+
 /* Clock event handling */
 static void exynos4_mct_tick_stop(struct mct_clock_event_device *mevt)
 {
@@ -428,9 +429,13 @@ int __cpuinit local_timer_setup(struct clock_event_device *evt)
 
 void local_timer_stop(struct clock_event_device *evt)
 {
+	unsigned int cpu = smp_processor_id();
 	evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
 	if (mct_int_type == MCT_INT_SPI)
-		disable_irq(evt->irq);
+		if (cpu == 0)
+			remove_irq(evt->irq, &mct_tick0_event_irq);
+		else
+			remove_irq(evt->irq, &mct_tick1_event_irq);
 	else
 		disable_percpu_irq(IRQ_MCT_LOCALTIMER);
 }
@@ -443,6 +448,7 @@ static void __init exynos4_timer_resources(void)
 
 	clk_rate = clk_get_rate(mct_clk);
 
+#ifdef CONFIG_LOCAL_TIMERS
 	if (mct_int_type == MCT_INT_PPI) {
 		int err;
 
@@ -452,6 +458,7 @@ static void __init exynos4_timer_resources(void)
 		WARN(err, "MCT: can't request IRQ %d (%d)\n",
 		     IRQ_MCT_LOCALTIMER, err);
 	}
+#endif /* CONFIG_LOCAL_TIMERS */
 }
 
 static void __init exynos4_timer_init(void)
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index 69ffb2f..60bc45e 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -32,7 +32,6 @@
 
 #include <plat/cpu.h>
 
-extern unsigned int gic_bank_offset;
 extern void exynos4_secondary_startup(void);
 
 #define CPU1_BOOT_REG		(samsung_rev() == EXYNOS4210_REV_1_1 ? \
@@ -65,31 +64,6 @@ static void __iomem *scu_base_addr(void)
 
 static DEFINE_SPINLOCK(boot_lock);
 
-static void __cpuinit exynos4_gic_secondary_init(void)
-{
-	void __iomem *dist_base = S5P_VA_GIC_DIST +
-				(gic_bank_offset * smp_processor_id());
-	void __iomem *cpu_base = S5P_VA_GIC_CPU +
-				(gic_bank_offset * smp_processor_id());
-	int i;
-
-	/*
-	 * Deal with the banked PPI and SGI interrupts - disable all
-	 * PPI interrupts, ensure all SGI interrupts are enabled.
-	 */
-	__raw_writel(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR);
-	__raw_writel(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET);
-
-	/*
-	 * Set priority on PPI and SGI interrupts
-	 */
-	for (i = 0; i < 32; i += 4)
-		__raw_writel(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4);
-
-	__raw_writel(0xf0, cpu_base + GIC_CPU_PRIMASK);
-	__raw_writel(1, cpu_base + GIC_CPU_CTRL);
-}
-
 void __cpuinit platform_secondary_init(unsigned int cpu)
 {
 	/*
@@ -97,7 +71,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 	 * core (e.g. timer irq), then they will not have been enabled
 	 * for us: do so
 	 */
-	exynos4_gic_secondary_init();
+	gic_secondary_init(0);
 
 	/*
 	 * let the primary processor know we're out of the
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index 509a435..c4f792d 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -205,7 +205,7 @@ static void exynos4_pm_prepare(void)
 
 }
 
-static int exynos4_pm_add(struct sys_device *sysdev)
+static int exynos4_pm_add(struct device *dev)
 {
 	pm_cpu_prep = exynos4_pm_prepare;
 	pm_cpu_sleep = exynos4_cpu_suspend;
@@ -301,8 +301,10 @@ static void exynos4_restore_pll(void)
 	} while (epll_wait || vpll_wait);
 }
 
-static struct sysdev_driver exynos4_pm_driver = {
-	.add		= exynos4_pm_add,
+static struct subsys_interface exynos4_pm_interface = {
+	.name		= "exynos4_pm",
+	.subsys		= &exynos4_subsys,
+	.add_dev	= exynos4_pm_add,
 };
 
 static __init int exynos4_pm_drvinit(void)
@@ -325,7 +327,7 @@ static __init int exynos4_pm_drvinit(void)
 		clk_put(pll_base);
 	}
 
-	return sysdev_driver_register(&exynos4_sysclass, &exynos4_pm_driver);
+	return subsys_interface_register(&exynos4_pm_interface);
 }
 arch_initcall(exynos4_pm_drvinit);
 
diff --git a/arch/arm/mach-footbridge/cats-hw.c b/arch/arm/mach-footbridge/cats-hw.c
index d5f1785..25b4536 100644
--- a/arch/arm/mach-footbridge/cats-hw.c
+++ b/arch/arm/mach-footbridge/cats-hw.c
@@ -86,9 +86,10 @@ fixup_cats(struct tag *tags, char **cmdline, struct meminfo *mi)
 MACHINE_START(CATS, "Chalice-CATS")
 	/* Maintainer: Philip Blundell */
 	.atag_offset	= 0x100,
-	.soft_reboot	= 1,
+	.restart_mode	= 's',
 	.fixup		= fixup_cats,
 	.map_io		= footbridge_map_io,
 	.init_irq	= footbridge_init_irq,
 	.timer		= &isa_timer,
+	.restart	= footbridge_restart,
 MACHINE_END
diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c
index 38a44f9..41978ee 100644
--- a/arch/arm/mach-footbridge/common.c
+++ b/arch/arm/mach-footbridge/common.c
@@ -199,6 +199,33 @@ void __init footbridge_map_io(void)
 		iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc));
 }
 
+void footbridge_restart(char mode, const char *cmd)
+{
+	if (mode == 's') {
+		/* Jump into the ROM */
+		soft_restart(0x41000000);
+	} else {
+		/*
+		 * Force the watchdog to do a CPU reset.
+		 *
+		 * After making sure that the watchdog is disabled
+		 * (so we can change the timer registers) we first
+		 * enable the timer to autoreload itself.  Next, the
+		 * timer interval is set really short and any
+		 * current interrupt request is cleared (so we can
+		 * see an edge transition).  Finally, TIMER4 is
+		 * enabled as the watchdog.
+		 */
+		*CSR_SA110_CNTL &= ~(1 << 13);
+		*CSR_TIMER4_CNTL = TIMER_CNTL_ENABLE |
+				   TIMER_CNTL_AUTORELOAD |
+				   TIMER_CNTL_DIV16;
+		*CSR_TIMER4_LOAD = 0x2;
+		*CSR_TIMER4_CLR  = 0;
+		*CSR_SA110_CNTL |= (1 << 13);
+	}
+}
+
 #ifdef CONFIG_FOOTBRIDGE_ADDIN
 
 static inline unsigned long fb_bus_sdram_offset(void)
diff --git a/arch/arm/mach-footbridge/common.h b/arch/arm/mach-footbridge/common.h
index b05e662..c9767b8 100644
--- a/arch/arm/mach-footbridge/common.h
+++ b/arch/arm/mach-footbridge/common.h
@@ -8,3 +8,4 @@ extern void footbridge_map_io(void);
 extern void footbridge_init_irq(void);
 
 extern void isa_init_irq(unsigned int irq);
+extern void footbridge_restart(char, const char *);
diff --git a/arch/arm/mach-footbridge/ebsa285.c b/arch/arm/mach-footbridge/ebsa285.c
index 012210c..27716a7 100644
--- a/arch/arm/mach-footbridge/ebsa285.c
+++ b/arch/arm/mach-footbridge/ebsa285.c
@@ -21,5 +21,6 @@ MACHINE_START(EBSA285, "EBSA285")
 	.map_io		= footbridge_map_io,
 	.init_irq	= footbridge_init_irq,
 	.timer		= &footbridge_timer,
+	.restart	= footbridge_restart,
 MACHINE_END
 
diff --git a/arch/arm/mach-footbridge/include/mach/system.h b/arch/arm/mach-footbridge/include/mach/system.h
index 0b29315..a174a58 100644
--- a/arch/arm/mach-footbridge/include/mach/system.h
+++ b/arch/arm/mach-footbridge/include/mach/system.h
@@ -7,63 +7,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <linux/io.h>
-#include <asm/hardware/dec21285.h>
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
 static inline void arch_idle(void)
 {
 	cpu_do_idle();
 }
-
-static inline void arch_reset(char mode, const char *cmd)
-{
-	if (mode == 's') {
-		/*
-		 * Jump into the ROM
-		 */
-		cpu_reset(0x41000000);
-	} else {
-		if (machine_is_netwinder()) {
-			/* open up the SuperIO chip
-			 */
-			outb(0x87, 0x370);
-			outb(0x87, 0x370);
-
-			/* aux function group 1 (logical device 7)
-			 */
-			outb(0x07, 0x370);
-			outb(0x07, 0x371);
-
-			/* set GP16 for WD-TIMER output
-			 */
-			outb(0xe6, 0x370);
-			outb(0x00, 0x371);
-
-			/* set a RED LED and toggle WD_TIMER for rebooting
-			 */
-			outb(0xc4, 0x338);
-		} else {
-			/* 
-			 * Force the watchdog to do a CPU reset.
-			 *
-			 * After making sure that the watchdog is disabled
-			 * (so we can change the timer registers) we first
-			 * enable the timer to autoreload itself.  Next, the
-			 * timer interval is set really short and any
-			 * current interrupt request is cleared (so we can
-			 * see an edge transition).  Finally, TIMER4 is
-			 * enabled as the watchdog.
-			 */
-			*CSR_SA110_CNTL &= ~(1 << 13);
-			*CSR_TIMER4_CNTL = TIMER_CNTL_ENABLE |
-					   TIMER_CNTL_AUTORELOAD |
-					   TIMER_CNTL_DIV16;
-			*CSR_TIMER4_LOAD = 0x2;
-			*CSR_TIMER4_CLR  = 0;
-			*CSR_SA110_CNTL |= (1 << 13);
-		}
-	}
-}
diff --git a/arch/arm/mach-footbridge/include/mach/vmalloc.h b/arch/arm/mach-footbridge/include/mach/vmalloc.h
deleted file mode 100644
index 40ba78e..0000000
--- a/arch/arm/mach-footbridge/include/mach/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- *  arch/arm/mach-footbridge/include/mach/vmalloc.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-
-#define VMALLOC_END       0xf0000000UL
diff --git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c
index 0d3846f..80a1c5c 100644
--- a/arch/arm/mach-footbridge/netwinder-hw.c
+++ b/arch/arm/mach-footbridge/netwinder-hw.c
@@ -645,6 +645,32 @@ fixup_netwinder(struct tag *tags, char **cmdline, struct meminfo *mi)
 #endif
 }
 
+static void netwinder_restart(char mode, const char *cmd)
+{
+	if (mode == 's') {
+		/* Jump into the ROM */
+		soft_restart(0x41000000);
+	} else {
+		local_irq_disable();
+		local_fiq_disable();
+
+		/* open up the SuperIO chip */
+		outb(0x87, 0x370);
+		outb(0x87, 0x370);
+
+		/* aux function group 1 (logical device 7) */
+		outb(0x07, 0x370);
+		outb(0x07, 0x371);
+
+		/* set GP16 for WD-TIMER output */
+		outb(0xe6, 0x370);
+		outb(0x00, 0x371);
+
+		/* set a RED LED and toggle WD_TIMER for rebooting */
+		outb(0xc4, 0x338);
+	}
+}
+
 MACHINE_START(NETWINDER, "Rebel-NetWinder")
 	/* Maintainer: Russell King/Rebel.com */
 	.atag_offset	= 0x100,
@@ -656,4 +682,5 @@ MACHINE_START(NETWINDER, "Rebel-NetWinder")
 	.map_io		= footbridge_map_io,
 	.init_irq	= footbridge_init_irq,
 	.timer		= &isa_timer,
+	.restart	= netwinder_restart,
 MACHINE_END
diff --git a/arch/arm/mach-footbridge/personal.c b/arch/arm/mach-footbridge/personal.c
index f41dba3..e1e9990 100644
--- a/arch/arm/mach-footbridge/personal.c
+++ b/arch/arm/mach-footbridge/personal.c
@@ -19,5 +19,6 @@ MACHINE_START(PERSONAL_SERVER, "Compaq-PersonalServer")
 	.map_io		= footbridge_map_io,
 	.init_irq	= footbridge_init_irq,
 	.timer		= &footbridge_timer,
+	.restart	= footbridge_restart,
 MACHINE_END
 
diff --git a/arch/arm/mach-gemini/include/mach/vmalloc.h b/arch/arm/mach-gemini/include/mach/vmalloc.h
deleted file mode 100644
index 45371eb..0000000
--- a/arch/arm/mach-gemini/include/mach/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- *  Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#define VMALLOC_END	0xf0000000UL
diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c
index 51d4e44..f8a2f6b 100644
--- a/arch/arm/mach-h720x/common.c
+++ b/arch/arm/mach-h720x/common.c
@@ -242,3 +242,8 @@ void __init h720x_map_io(void)
 {
 	iotable_init(h720x_io_desc,ARRAY_SIZE(h720x_io_desc));
 }
+
+void h720x_restart(char mode, const char *cmd)
+{
+	CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET;
+}
diff --git a/arch/arm/mach-h720x/common.h b/arch/arm/mach-h720x/common.h
index 7dd5fa6..2489537 100644
--- a/arch/arm/mach-h720x/common.h
+++ b/arch/arm/mach-h720x/common.h
@@ -16,6 +16,7 @@
 extern unsigned long h720x_gettimeoffset(void);
 extern void __init h720x_init_irq(void);
 extern void __init h720x_map_io(void);
+extern void h720x_restart(char, const char *);
 
 #ifdef CONFIG_ARCH_H7202
 extern struct sys_timer h7202_timer;
diff --git a/arch/arm/mach-h720x/h7201-eval.c b/arch/arm/mach-h720x/h7201-eval.c
index 9886f19..5fdb20c 100644
--- a/arch/arm/mach-h720x/h7201-eval.c
+++ b/arch/arm/mach-h720x/h7201-eval.c
@@ -34,4 +34,5 @@ MACHINE_START(H7201, "Hynix GMS30C7201")
 	.init_irq	= h720x_init_irq,
 	.timer		= &h7201_timer,
 	.dma_zone_size	= SZ_256M,
+	.restart	= h720x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-h720x/h7202-eval.c b/arch/arm/mach-h720x/h7202-eval.c
index 284a134..1696730 100644
--- a/arch/arm/mach-h720x/h7202-eval.c
+++ b/arch/arm/mach-h720x/h7202-eval.c
@@ -77,4 +77,5 @@ MACHINE_START(H7202, "Hynix HMS30C7202")
 	.timer		= &h7202_timer,
 	.init_machine	= init_eval_h7202,
 	.dma_zone_size	= SZ_256M,
+	.restart	= h720x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-h720x/include/mach/system.h b/arch/arm/mach-h720x/include/mach/system.h
index a708d24..16ac46e 100644
--- a/arch/arm/mach-h720x/include/mach/system.h
+++ b/arch/arm/mach-h720x/include/mach/system.h
@@ -24,10 +24,4 @@ static void arch_idle(void)
 	nop();
 }
 
-
-static __inline__ void arch_reset(char mode, const char *cmd)
-{
-	CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET;
-}
-
 #endif
diff --git a/arch/arm/mach-h720x/include/mach/vmalloc.h b/arch/arm/mach-h720x/include/mach/vmalloc.h
deleted file mode 100644
index 8520b4a..0000000
--- a/arch/arm/mach-h720x/include/mach/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * arch/arm/mach-h720x/include/mach/vmalloc.h
- */
-
-#ifndef __ARCH_ARM_VMALLOC_H
-#define __ARCH_ARM_VMALLOC_H
-
-#define VMALLOC_END       0xd0000000UL
-
-#endif
diff --git a/arch/arm/mach-highbank/core.h b/arch/arm/mach-highbank/core.h
index 7e33fc9..d8e2d0b 100644
--- a/arch/arm/mach-highbank/core.h
+++ b/arch/arm/mach-highbank/core.h
@@ -1,5 +1,6 @@
 extern void highbank_set_cpu_jump(int cpu, void *jump_addr);
 extern void highbank_clocks_init(void);
+extern void highbank_restart(char, const char *);
 extern void __iomem *scu_base_addr;
 #ifdef CONFIG_DEBUG_HIGHBANK_UART
 extern void highbank_lluart_map_io(void);
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index b82dcf0..804c4a5 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -22,6 +22,7 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/of_address.h>
+#include <linux/smp.h>
 
 #include <asm/cacheflush.h>
 #include <asm/unified.h>
@@ -72,6 +73,9 @@ static void __init highbank_map_io(void)
 
 void highbank_set_cpu_jump(int cpu, void *jump_addr)
 {
+#ifdef CONFIG_SMP
+	cpu = cpu_logical_map(cpu);
+#endif
 	writel(BSYM(virt_to_phys(jump_addr)), HB_JUMP_TABLE_VIRT(cpu));
 	__cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16);
 	outer_clean_range(HB_JUMP_TABLE_PHYS(cpu),
@@ -140,6 +144,8 @@ DT_MACHINE_START(HIGHBANK, "Highbank")
 	.map_io		= highbank_map_io,
 	.init_irq	= highbank_init_irq,
 	.timer		= &highbank_timer,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= highbank_init,
 	.dt_compat	= highbank_match,
+	.restart	= highbank_restart,
 MACHINE_END
diff --git a/arch/arm/mach-highbank/include/mach/entry-macro.S b/arch/arm/mach-highbank/include/mach/entry-macro.S
index 73c1129..a14f9e6 100644
--- a/arch/arm/mach-highbank/include/mach/entry-macro.S
+++ b/arch/arm/mach-highbank/include/mach/entry-macro.S
@@ -1,5 +1,3 @@
-#include <asm/hardware/entry-macro-gic.S>
-
 	.macro	disable_fiq
 	.endm
 
diff --git a/arch/arm/mach-highbank/include/mach/system.h b/arch/arm/mach-highbank/include/mach/system.h
index 7e81922..b1d8b5f 100644
--- a/arch/arm/mach-highbank/include/mach/system.h
+++ b/arch/arm/mach-highbank/include/mach/system.h
@@ -21,6 +21,4 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-extern void arch_reset(char mode, const char *cmd);
-
 #endif
diff --git a/arch/arm/mach-highbank/include/mach/vmalloc.h b/arch/arm/mach-highbank/include/mach/vmalloc.h
deleted file mode 100644
index 1969e95..0000000
--- a/arch/arm/mach-highbank/include/mach/vmalloc.h
+++ /dev/null
@@ -1 +0,0 @@
-#define VMALLOC_END		0xFEE00000UL
diff --git a/arch/arm/mach-highbank/system.c b/arch/arm/mach-highbank/system.c
index 53f0c4c..82c27230 100644
--- a/arch/arm/mach-highbank/system.c
+++ b/arch/arm/mach-highbank/system.c
@@ -20,7 +20,7 @@
 #include "core.h"
 #include "sysregs.h"
 
-void arch_reset(char mode, const char *cmd)
+void highbank_restart(char mode, const char *cmd)
 {
 	if (mode == 'h')
 		hignbank_set_pwr_hard_reset();
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 5f7f9c2..35a218c 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -10,11 +10,6 @@ config HAVE_IMX_MMDC
 config HAVE_IMX_SRC
 	bool
 
-#
-# ARCH_MX31 and ARCH_MX35 are left for compatibility
-# Some usages assume that having one of them implies not having (e.g.) ARCH_MX2.
-# To easily distinguish good and reviewed from unreviewed usages new (and IMHO
-# more sensible) names are used: SOC_IMX31 and SOC_IMX35
 config ARCH_MX1
 	bool
 
@@ -27,12 +22,6 @@ config ARCH_MX25
 config MACH_MX27
 	bool
 
-config ARCH_MX31
-	bool
-
-config ARCH_MX35
-	bool
-
 config SOC_IMX1
 	bool
 	select ARCH_MX1
@@ -72,7 +61,6 @@ config SOC_IMX31
 	select CPU_V6
 	select IMX_HAVE_PLATFORM_MXC_RNGA
 	select ARCH_MXC_AUDMUX_V2
-	select ARCH_MX31
 	select MXC_AVIC
 	select SMP_ON_UP if SMP
 
@@ -82,7 +70,6 @@ config SOC_IMX35
 	select ARCH_MXC_IOMUX_V3
 	select ARCH_MXC_AUDMUX_V2
 	select HAVE_EPIT
-	select ARCH_MX35
 	select MXC_AVIC
 	select SMP_ON_UP if SMP
 
@@ -145,7 +132,7 @@ config MACH_MX25_3DS
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 
-config MACH_EUKREA_CPUIMX25
+config MACH_EUKREA_CPUIMX25SD
 	bool "Support Eukrea CPUIMX25 Platform"
 	select SOC_IMX25
 	select IMX_HAVE_PLATFORM_FLEXCAN
@@ -161,7 +148,7 @@ config MACH_EUKREA_CPUIMX25
 
 choice
 	prompt "Baseboard"
-	depends on MACH_EUKREA_CPUIMX25
+	depends on MACH_EUKREA_CPUIMX25SD
 	default MACH_EUKREA_MBIMXSD25_BASEBOARD
 
 config MACH_EUKREA_MBIMXSD25_BASEBOARD
@@ -555,7 +542,7 @@ config MACH_MX35_3DS
 	  Include support for MX35PDK platform. This includes specific
 	  configurations for the board and its peripherals.
 
-config MACH_EUKREA_CPUIMX35
+config MACH_EUKREA_CPUIMX35SD
 	bool "Support Eukrea CPUIMX35 Platform"
 	select SOC_IMX35
 	select IMX_HAVE_PLATFORM_FLEXCAN
@@ -573,7 +560,7 @@ config MACH_EUKREA_CPUIMX35
 
 choice
 	prompt "Baseboard"
-	depends on MACH_EUKREA_CPUIMX35
+	depends on MACH_EUKREA_CPUIMX35SD
 	default MACH_EUKREA_MBIMXSD35_BASEBOARD
 
 config MACH_EUKREA_MBIMXSD35_BASEBOARD
@@ -609,12 +596,12 @@ comment "i.MX6 family:"
 config SOC_IMX6Q
 	bool "i.MX6 Quad support"
 	select ARM_GIC
-	select CACHE_L2X0
 	select CPU_V7
 	select HAVE_ARM_SCU
 	select HAVE_IMX_GPC
 	select HAVE_IMX_MMDC
 	select HAVE_IMX_SRC
+	select HAVE_SMP
 	select USE_OF
 
 	help
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index aba7321..d97f409 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -24,7 +24,7 @@ obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
 
 # i.MX25 based machines
 obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX25) += mach-eukrea_cpuimx25.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX25SD) += mach-eukrea_cpuimx25.o
 obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o
 
 # i.MX27 based machines
@@ -57,7 +57,7 @@ obj-$(CONFIG_MACH_BUG) += mach-bug.o
 # i.MX35 based machines
 obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o
 obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX35) += mach-cpuimx35.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX35SD) += mach-cpuimx35.o
 obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o
 obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
 
diff --git a/arch/arm/mach-imx/clock-imx35.c b/arch/arm/mach-imx/clock-imx35.c
index 8116f11..ac8238c 100644
--- a/arch/arm/mach-imx/clock-imx35.c
+++ b/arch/arm/mach-imx/clock-imx35.c
@@ -507,7 +507,7 @@ static struct clk_lookup lookups[] = {
 
 int __init mx35_clocks_init()
 {
-	unsigned int cgr2 = 3 << 26, cgr3 = 0;
+	unsigned int cgr2 = 3 << 26;
 
 #if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
 	cgr2 |= 3 << 16;
@@ -521,6 +521,12 @@ int __init mx35_clocks_init()
 	__raw_writel((3 << 18), CCM_BASE + CCM_CGR0);
 	__raw_writel((3 << 2) | (3 << 4) | (3 << 6) | (3 << 8) | (3 << 16),
 			CCM_BASE + CCM_CGR1);
+	__raw_writel(cgr2, CCM_BASE + CCM_CGR2);
+	__raw_writel(0, CCM_BASE + CCM_CGR3);
+
+	clk_enable(&iim_clk);
+	imx_print_silicon_rev("i.MX35", mx35_revision());
+	clk_disable(&iim_clk);
 
 	/*
 	 * Check if we came up in internal boot mode. If yes, we need some
@@ -529,17 +535,11 @@ int __init mx35_clocks_init()
 	 */
 	if (!(__raw_readl(CCM_BASE + CCM_RCSR) & (3 << 10))) {
 		/* Additionally turn on UART1, SCC, and IIM clocks */
-		cgr2 |= 3 << 16 | 3 << 4;
-		cgr3 |= 3 << 2;
+		clk_enable(&iim_clk);
+		clk_enable(&uart1_clk);
+		clk_enable(&scc_clk);
 	}
 
-	__raw_writel(cgr2, CCM_BASE + CCM_CGR2);
-	__raw_writel(cgr3, CCM_BASE + CCM_CGR3);
-
-	clk_enable(&iim_clk);
-	imx_print_silicon_rev("i.MX35", mx35_revision());
-	clk_disable(&iim_clk);
-
 #ifdef CONFIG_MXC_USE_EPIT
 	epit_timer_init(&epit1_clk,
 			MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1);
diff --git a/arch/arm/mach-imx/clock-imx6q.c b/arch/arm/mach-imx/clock-imx6q.c
index 613a1b9..9273c2a 100644
--- a/arch/arm/mach-imx/clock-imx6q.c
+++ b/arch/arm/mach-imx/clock-imx6q.c
@@ -1931,14 +1931,12 @@ int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
 		val |= 0x1 << BP_CLPCR_LPM;
 		val &= ~BM_CLPCR_VSTBY;
 		val &= ~BM_CLPCR_SBYOS;
-		val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
 		break;
 	case STOP_POWER_OFF:
 		val |= 0x2 << BP_CLPCR_LPM;
 		val |= 0x3 << BP_CLPCR_STBY_COUNT;
 		val |= BM_CLPCR_VSTBY;
 		val |= BM_CLPCR_SBYOS;
-		val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
 		break;
 	default:
 		return -EINVAL;
@@ -1953,14 +1951,17 @@ static struct map_desc imx6q_clock_desc[] = {
 	imx_map_entry(MX6Q, ANATOP, MT_DEVICE),
 };
 
+void __init imx6q_clock_map_io(void)
+{
+	iotable_init(imx6q_clock_desc, ARRAY_SIZE(imx6q_clock_desc));
+}
+
 int __init mx6q_clocks_init(void)
 {
 	struct device_node *np;
 	void __iomem *base;
 	int i, irq;
 
-	iotable_init(imx6q_clock_desc, ARRAY_SIZE(imx6q_clock_desc));
-
 	/* retrieve the freqency of fixed clocks from device tree */
 	for_each_compatible_node(np, NULL, "fixed-clock") {
 		u32 rate;
diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c
index 1e486e6..146a4f0 100644
--- a/arch/arm/mach-imx/mach-apf9328.c
+++ b/arch/arm/mach-imx/mach-apf9328.c
@@ -139,4 +139,5 @@ MACHINE_START(APF9328, "Armadeus APF9328")
 	.handle_irq   = imx1_handle_irq,
 	.timer        = &apf9328_timer,
 	.init_machine = apf9328_init,
+	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
index c9a9cf6..e4f426a 100644
--- a/arch/arm/mach-imx/mach-armadillo5x0.c
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -561,4 +561,5 @@ MACHINE_START(ARMADILLO5X0, "Armadillo-500")
 	.handle_irq = imx31_handle_irq,
 	.timer = &armadillo5x0_timer,
 	.init_machine = armadillo5x0_init,
+	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-bug.c b/arch/arm/mach-imx/mach-bug.c
index 313f62d..9a98977 100644
--- a/arch/arm/mach-imx/mach-bug.c
+++ b/arch/arm/mach-imx/mach-bug.c
@@ -65,4 +65,5 @@ MACHINE_START(BUG, "BugLabs BUGBase")
 	.handle_irq = imx31_handle_irq,
 	.timer = &bug_timer,
 	.init_machine = bug_board_init,
+	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index edb3730..d085aea 100644
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -318,4 +318,5 @@ MACHINE_START(EUKREA_CPUIMX27, "EUKREA CPUIMX27")
 	.handle_irq = imx27_handle_irq,
 	.timer = &eukrea_cpuimx27_timer,
 	.init_machine = eukrea_cpuimx27_init,
+	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c
index 66af2e8..8ecc872 100644
--- a/arch/arm/mach-imx/mach-cpuimx35.c
+++ b/arch/arm/mach-imx/mach-cpuimx35.c
@@ -53,12 +53,18 @@ static const struct imxi2c_platform_data
 	.bitrate =		100000,
 };
 
+#define TSC2007_IRQGPIO		IMX_GPIO_NR(3, 2)
+static int tsc2007_get_pendown_state(void)
+{
+	return !gpio_get_value(TSC2007_IRQGPIO);
+}
+
 static struct tsc2007_platform_data tsc2007_info = {
 	.model			= 2007,
 	.x_plate_ohms		= 180,
+	.get_pendown_state = tsc2007_get_pendown_state,
 };
 
-#define TSC2007_IRQGPIO		IMX_GPIO_NR(3, 2)
 static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("pcf8563", 0x51),
@@ -201,4 +207,5 @@ MACHINE_START(EUKREA_CPUIMX35SD, "Eukrea CPUIMX35")
 	.handle_irq = imx35_handle_irq,
 	.timer = &eukrea_cpuimx35_timer,
 	.init_machine = eukrea_cpuimx35_init,
+	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
index ab8fbcc..76a97a5 100644
--- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
+++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
@@ -170,4 +170,5 @@ MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25")
 	.handle_irq = imx25_handle_irq,
 	.timer = &eukrea_cpuimx25_timer,
 	.init_machine = eukrea_cpuimx25_init,
+	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index 38eb9e4..c2766ae 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -282,4 +282,5 @@ MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10")
 	.handle_irq = imx27_handle_irq,
 	.timer = &visstrim_m10_timer,
 	.init_machine = visstrim_m10_board_init,
+	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c
index 7052155..c9d350c 100644
--- a/arch/arm/mach-imx/mach-imx27ipcam.c
+++ b/arch/arm/mach-imx/mach-imx27ipcam.c
@@ -78,4 +78,5 @@ MACHINE_START(IMX27IPCAM, "Freescale IMX27IPCAM")
 	.handle_irq = imx27_handle_irq,
 	.timer = &mx27ipcam_timer,
 	.init_machine = mx27ipcam_init,
+	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c
index 8d6a635..1f45b91 100644
--- a/arch/arm/mach-imx/mach-imx27lite.c
+++ b/arch/arm/mach-imx/mach-imx27lite.c
@@ -84,4 +84,5 @@ MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
 	.handle_irq = imx27_handle_irq,
 	.timer = &mx27lite_timer,
 	.init_machine = mx27lite_init,
+	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 8bf5fa3..05b49bb 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -10,10 +10,13 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
+#include <linux/delay.h>
 #include <linux/init.h>
+#include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/irqdomain.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <asm/hardware/cache-l2x0.h>
@@ -23,6 +26,36 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 
+void imx6q_restart(char mode, const char *cmd)
+{
+	struct device_node *np;
+	void __iomem *wdog_base;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-wdt");
+	wdog_base = of_iomap(np, 0);
+	if (!wdog_base)
+		goto soft;
+
+	imx_src_prepare_restart();
+
+	/* enable wdog */
+	writew_relaxed(1 << 2, wdog_base);
+	/* write twice to ensure the request will not get ignored */
+	writew_relaxed(1 << 2, wdog_base);
+
+	/* wait for reset to assert ... */
+	mdelay(500);
+
+	pr_err("Watchdog reset failed to assert reset\n");
+
+	/* delay to allow the serial port to show the message */
+	mdelay(50);
+
+soft:
+	/* we'll take a jump through zero as a poor second */
+	soft_restart(0);
+}
+
 static void __init imx6q_init_machine(void)
 {
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
@@ -34,16 +67,18 @@ static void __init imx6q_map_io(void)
 {
 	imx_lluart_map_io();
 	imx_scu_map_io();
+	imx6q_clock_map_io();
 }
 
-static void __init imx6q_gpio_add_irq_domain(struct device_node *np,
+static int __init imx6q_gpio_add_irq_domain(struct device_node *np,
 				struct device_node *interrupt_parent)
 {
-	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS -
-				   32 * 7; /* imx6q gets 7 gpio ports */
+	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
 
+	gpio_irq_base -= 32;
 	irq_domain_add_simple(np, gpio_irq_base);
-	gpio_irq_base += 32;
+
+	return 0;
 }
 
 static const struct of_device_id imx6q_irq_match[] __initconst = {
@@ -81,4 +116,5 @@ DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad (Device Tree)")
 	.timer		= &imx6q_timer,
 	.init_machine	= imx6q_init_machine,
 	.dt_compat	= imx6q_dt_compat,
+	.restart	= imx6q_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c
index 5f37f89..fc78e80 100644
--- a/arch/arm/mach-imx/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c
@@ -279,4 +279,5 @@ MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
 	.handle_irq = imx31_handle_irq,
 	.timer = &kzm_timer,
 	.init_machine = kzm_board_init,
+	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c
index fc49785..9704608 100644
--- a/arch/arm/mach-imx/mach-mx1ads.c
+++ b/arch/arm/mach-imx/mach-mx1ads.c
@@ -147,6 +147,7 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS")
 	.handle_irq = imx1_handle_irq,
 	.timer = &mx1ads_timer,
 	.init_machine = mx1ads_init,
+	.restart	= mxc_restart,
 MACHINE_END
 
 MACHINE_START(MXLADS, "Freescale MXLADS")
@@ -157,4 +158,5 @@ MACHINE_START(MXLADS, "Freescale MXLADS")
 	.handle_irq = imx1_handle_irq,
 	.timer = &mx1ads_timer,
 	.init_machine = mx1ads_init,
+	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index 25f8402..8d9f955 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -312,4 +312,5 @@ MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
 	.handle_irq = imx21_handle_irq,
 	.timer = &mx21ads_timer,
 	.init_machine = mx21ads_board_init,
+	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c
index 88dccf1..f267342 100644
--- a/arch/arm/mach-imx/mach-mx25_3ds.c
+++ b/arch/arm/mach-imx/mach-mx25_3ds.c
@@ -270,4 +270,5 @@ MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
 	.handle_irq = imx25_handle_irq,
 	.timer = &mx25pdk_timer,
 	.init_machine = mx25pdk_init,
+	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index ba232d7..18f3581 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -425,4 +425,5 @@ MACHINE_START(MX27_3DS, "Freescale MX27PDK")
 	.handle_irq = imx27_handle_irq,
 	.timer = &mx27pdk_timer,
 	.init_machine = mx27pdk_init,
+	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index 74dd573..0228d2e 100644
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -351,4 +351,5 @@ MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
 	.handle_irq = imx27_handle_irq,
 	.timer = &mx27ads_timer,
 	.init_machine = mx27ads_board_init,
+	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index b8c54b8..2b565c3 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -770,4 +770,5 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
 	.timer = &mx31_3ds_timer,
 	.init_machine = mx31_3ds_init,
 	.reserve = mx31_3ds_reserve,
+	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c
index 9cc1a49..4917aab 100644
--- a/arch/arm/mach-imx/mach-mx31ads.c
+++ b/arch/arm/mach-imx/mach-mx31ads.c
@@ -542,4 +542,5 @@ MACHINE_START(MX31ADS, "Freescale MX31ADS")
 	.handle_irq = imx31_handle_irq,
 	.timer = &mx31ads_timer,
 	.init_machine = mx31ads_init,
+	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c
index 102ec99..02401bb 100644
--- a/arch/arm/mach-imx/mach-mx31lilly.c
+++ b/arch/arm/mach-imx/mach-mx31lilly.c
@@ -303,4 +303,5 @@ MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
 	.handle_irq = imx31_handle_irq,
 	.timer = &mx31lilly_timer,
 	.init_machine = mx31lilly_board_init,
+	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c
index 5366d2d..ef80751 100644
--- a/arch/arm/mach-imx/mach-mx31lite.c
+++ b/arch/arm/mach-imx/mach-mx31lite.c
@@ -287,4 +287,5 @@ MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
 	.handle_irq = imx31_handle_irq,
 	.timer = &mx31lite_timer,
 	.init_machine = mx31lite_init,
+	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index 9326915..b95981d 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -600,4 +600,5 @@ MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
 	.handle_irq = imx31_handle_irq,
 	.timer = &mx31moboard_timer,
 	.init_machine = mx31moboard_init,
+	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
index 7a46202..0af6c9c 100644
--- a/arch/arm/mach-imx/mach-mx35_3ds.c
+++ b/arch/arm/mach-imx/mach-mx35_3ds.c
@@ -224,4 +224,5 @@ MACHINE_START(MX35_3DS, "Freescale MX35PDK")
 	.handle_irq = imx35_handle_irq,
 	.timer = &mx35pdk_timer,
 	.init_machine = mx35_3ds_init,
+	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
index 125c196..8b3d3f0 100644
--- a/arch/arm/mach-imx/mach-mxt_td60.c
+++ b/arch/arm/mach-imx/mach-mxt_td60.c
@@ -274,4 +274,5 @@ MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
 	.handle_irq = imx27_handle_irq,
 	.timer = &mxt_td60_timer,
 	.init_machine = mxt_td60_board_init,
+	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index 26072f4..d3b9c6b 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -442,4 +442,5 @@ MACHINE_START(PCA100, "phyCARD-i.MX27")
 	.handle_irq = imx27_handle_irq,
 	.init_machine = pca100_init,
 	.timer = &pca100_timer,
+	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c
index efd6b53..d7e1516 100644
--- a/arch/arm/mach-imx/mach-pcm037.c
+++ b/arch/arm/mach-imx/mach-pcm037.c
@@ -696,4 +696,5 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037")
 	.handle_irq = imx31_handle_irq,
 	.timer = &pcm037_timer,
 	.init_machine = pcm037_init,
+	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index a17e9c7..16f126d 100644
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -357,4 +357,5 @@ MACHINE_START(PCM038, "phyCORE-i.MX27")
 	.handle_irq = imx27_handle_irq,
 	.timer = &pcm038_timer,
 	.init_machine = pcm038_init,
+	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
index 7366c2a..06dc106 100644
--- a/arch/arm/mach-imx/mach-pcm043.c
+++ b/arch/arm/mach-imx/mach-pcm043.c
@@ -425,4 +425,5 @@ MACHINE_START(PCM043, "Phytec Phycore pcm043")
 	.handle_irq = imx35_handle_irq,
 	.timer = &pcm043_timer,
 	.init_machine = pcm043_init,
+	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c
index 4ff5faf..2606210 100644
--- a/arch/arm/mach-imx/mach-qong.c
+++ b/arch/arm/mach-imx/mach-qong.c
@@ -273,4 +273,5 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
 	.handle_irq = imx31_handle_irq,
 	.timer = &qong_timer,
 	.init_machine = qong_init,
+	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c
index bb6e5b2..cb9ceae 100644
--- a/arch/arm/mach-imx/mach-scb9328.c
+++ b/arch/arm/mach-imx/mach-scb9328.c
@@ -144,4 +144,5 @@ MACHINE_START(SCB9328, "Synertronixx scb9328")
 	.handle_irq = imx1_handle_irq,
 	.timer = &scb9328_timer,
 	.init_machine = scb9328_init,
+	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c
index 6909245..033257e 100644
--- a/arch/arm/mach-imx/mach-vpr200.c
+++ b/arch/arm/mach-imx/mach-vpr200.c
@@ -322,4 +322,5 @@ MACHINE_START(VPR200, "VPR200")
 	.handle_irq = imx35_handle_irq,
 	.timer = &vpr200_timer,
 	.init_machine = vpr200_board_init,
+	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c
index 9f0e82e..31807d2 100644
--- a/arch/arm/mach-imx/mm-imx3.c
+++ b/arch/arm/mach-imx/mm-imx3.c
@@ -33,29 +33,32 @@
 static void imx3_idle(void)
 {
 	unsigned long reg = 0;
-	__asm__ __volatile__(
-		/* disable I and D cache */
-		"mrc p15, 0, %0, c1, c0, 0\n"
-		"bic %0, %0, #0x00001000\n"
-		"bic %0, %0, #0x00000004\n"
-		"mcr p15, 0, %0, c1, c0, 0\n"
-		/* invalidate I cache */
-		"mov %0, #0\n"
-		"mcr p15, 0, %0, c7, c5, 0\n"
-		/* clear and invalidate D cache */
-		"mov %0, #0\n"
-		"mcr p15, 0, %0, c7, c14, 0\n"
-		/* WFI */
-		"mov %0, #0\n"
-		"mcr p15, 0, %0, c7, c0, 4\n"
-		"nop\n" "nop\n" "nop\n" "nop\n"
-		"nop\n" "nop\n" "nop\n"
-		/* enable I and D cache */
-		"mrc p15, 0, %0, c1, c0, 0\n"
-		"orr %0, %0, #0x00001000\n"
-		"orr %0, %0, #0x00000004\n"
-		"mcr p15, 0, %0, c1, c0, 0\n"
-		: "=r" (reg));
+
+	if (!need_resched())
+		__asm__ __volatile__(
+			/* disable I and D cache */
+			"mrc p15, 0, %0, c1, c0, 0\n"
+			"bic %0, %0, #0x00001000\n"
+			"bic %0, %0, #0x00000004\n"
+			"mcr p15, 0, %0, c1, c0, 0\n"
+			/* invalidate I cache */
+			"mov %0, #0\n"
+			"mcr p15, 0, %0, c7, c5, 0\n"
+			/* clear and invalidate D cache */
+			"mov %0, #0\n"
+			"mcr p15, 0, %0, c7, c14, 0\n"
+			/* WFI */
+			"mov %0, #0\n"
+			"mcr p15, 0, %0, c7, c0, 4\n"
+			"nop\n" "nop\n" "nop\n" "nop\n"
+			"nop\n" "nop\n" "nop\n"
+			/* enable I and D cache */
+			"mrc p15, 0, %0, c1, c0, 0\n"
+			"orr %0, %0, #0x00001000\n"
+			"orr %0, %0, #0x00000004\n"
+			"mcr p15, 0, %0, c1, c0, 0\n"
+			: "=r" (reg));
+	local_irq_enable();
 }
 
 static void __iomem *imx3_ioremap(unsigned long phys_addr, size_t size,
@@ -108,6 +111,7 @@ void imx3_init_l2x0(void)
 	l2x0_init(l2x0_base, 0x00030024, 0x00000000);
 }
 
+#ifdef CONFIG_SOC_IMX31
 static struct map_desc mx31_io_desc[] __initdata = {
 	imx_map_entry(MX31, X_MEMC, MT_DEVICE),
 	imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED),
@@ -126,33 +130,11 @@ void __init mx31_map_io(void)
 	iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc));
 }
 
-static struct map_desc mx35_io_desc[] __initdata = {
-	imx_map_entry(MX35, X_MEMC, MT_DEVICE),
-	imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED),
-};
-
-void __init mx35_map_io(void)
-{
-	iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
-}
-
 void __init imx31_init_early(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX31);
 	mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
-	imx_idle = imx3_idle;
-	imx_ioremap = imx3_ioremap;
-}
-
-void __init imx35_init_early(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX35);
-	mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
-	mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
-	imx_idle = imx3_idle;
+	pm_idle = imx3_idle;
 	imx_ioremap = imx3_ioremap;
 }
 
@@ -161,11 +143,6 @@ void __init mx31_init_irq(void)
 	mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
 }
 
-void __init mx35_init_irq(void)
-{
-	mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
-}
-
 static struct sdma_script_start_addrs imx31_to1_sdma_script __initdata = {
 	.per_2_per_addr = 1677,
 };
@@ -199,6 +176,35 @@ void __init imx31_soc_init(void)
 
 	imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata);
 }
+#endif /* ifdef CONFIG_SOC_IMX31 */
+
+#ifdef CONFIG_SOC_IMX35
+static struct map_desc mx35_io_desc[] __initdata = {
+	imx_map_entry(MX35, X_MEMC, MT_DEVICE),
+	imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED),
+};
+
+void __init mx35_map_io(void)
+{
+	iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
+}
+
+void __init imx35_init_early(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX35);
+	mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
+	mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
+	pm_idle = imx3_idle;
+	imx_ioremap = imx3_ioremap;
+}
+
+void __init mx35_init_irq(void)
+{
+	mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
+}
 
 static struct sdma_script_start_addrs imx35_to1_sdma_script __initdata = {
 	.ap_2_ap_addr = 642,
@@ -254,3 +260,4 @@ void __init imx35_soc_init(void)
 
 	imx_add_imx_sdma("imx35-sdma", MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata);
 }
+#endif /* ifdef CONFIG_SOC_IMX35 */
diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c
index 36cacbd..4bde04f 100644
--- a/arch/arm/mach-imx/src.c
+++ b/arch/arm/mach-imx/src.c
@@ -14,19 +14,26 @@
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/smp.h>
 #include <asm/unified.h>
 
 #define SRC_SCR				0x000
 #define SRC_GPR1			0x020
+#define BP_SRC_SCR_WARM_RESET_ENABLE	0
 #define BP_SRC_SCR_CORE1_RST		14
 #define BP_SRC_SCR_CORE1_ENABLE		22
 
 static void __iomem *src_base;
 
+#ifndef CONFIG_SMP
+#define cpu_logical_map(cpu)		0
+#endif
+
 void imx_enable_cpu(int cpu, bool enable)
 {
 	u32 mask, val;
 
+	cpu = cpu_logical_map(cpu);
 	mask = 1 << (BP_SRC_SCR_CORE1_ENABLE + cpu - 1);
 	val = readl_relaxed(src_base + SRC_SCR);
 	val = enable ? val | mask : val & ~mask;
@@ -35,15 +42,38 @@ void imx_enable_cpu(int cpu, bool enable)
 
 void imx_set_cpu_jump(int cpu, void *jump_addr)
 {
+	cpu = cpu_logical_map(cpu);
 	writel_relaxed(BSYM(virt_to_phys(jump_addr)),
 		       src_base + SRC_GPR1 + cpu * 8);
 }
 
+void imx_src_prepare_restart(void)
+{
+	u32 val;
+
+	/* clear enable bits of secondary cores */
+	val = readl_relaxed(src_base + SRC_SCR);
+	val &= ~(0x7 << BP_SRC_SCR_CORE1_ENABLE);
+	writel_relaxed(val, src_base + SRC_SCR);
+
+	/* clear persistent entry register of primary core */
+	writel_relaxed(0, src_base + SRC_GPR1);
+}
+
 void __init imx_src_init(void)
 {
 	struct device_node *np;
+	u32 val;
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-src");
 	src_base = of_iomap(np, 0);
 	WARN_ON(!src_base);
+
+	/*
+	 * force warm reset sources to generate cold reset
+	 * for a more reliable restart
+	 */
+	val = readl_relaxed(src_base + SRC_SCR);
+	val &= ~(1 << BP_SRC_SCR_WARM_RESET_ENABLE);
+	writel_relaxed(val, src_base + SRC_SCR);
 }
diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig
index dfd18f3..350e266 100644
--- a/arch/arm/mach-integrator/Kconfig
+++ b/arch/arm/mach-integrator/Kconfig
@@ -6,6 +6,8 @@ config ARCH_INTEGRATOR_AP
 	bool "Support Integrator/AP and Integrator/PP2 platforms"
 	select CLKSRC_MMIO
 	select MIGHT_HAVE_PCI
+	select SERIAL_AMBA_PL010
+	select SERIAL_AMBA_PL010_CONSOLE
 	help
 	  Include support for the ARM(R) Integrator/AP and
 	  Integrator/PP2 platforms.
@@ -15,6 +17,8 @@ config ARCH_INTEGRATOR_CP
 	select ARCH_CINTEGRATOR
 	select ARM_TIMER_SP804
 	select PLAT_VERSATILE_CLCD
+	select SERIAL_AMBA_PL011
+	select SERIAL_AMBA_PL011_CONSOLE
 	help
 	  Include support for the ARM(R) Integrator CP platform.
 
diff --git a/arch/arm/mach-integrator/common.h b/arch/arm/mach-integrator/common.h
index a08f9b0..899561d 100644
--- a/arch/arm/mach-integrator/common.h
+++ b/arch/arm/mach-integrator/common.h
@@ -1,2 +1,3 @@
 void integrator_init_early(void);
 void integrator_reserve(void);
+void integrator_restart(char, const char *);
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index 4b38e13..019f0ab 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -29,6 +29,7 @@
 #include <mach/cm.h>
 #include <asm/system.h>
 #include <asm/leds.h>
+#include <asm/mach-types.h>
 #include <asm/mach/time.h>
 #include <asm/pgtable.h>
 
@@ -44,7 +45,6 @@ static struct amba_device rtc_device = {
 		.flags	= IORESOURCE_MEM,
 	},
 	.irq		= { IRQ_RTCINT, NO_IRQ },
-	.periphid	= 0x00041030,
 };
 
 static struct amba_device uart0_device = {
@@ -58,7 +58,6 @@ static struct amba_device uart0_device = {
 		.flags	= IORESOURCE_MEM,
 	},
 	.irq		= { IRQ_UARTINT0, NO_IRQ },
-	.periphid	= 0x0041010,
 };
 
 static struct amba_device uart1_device = {
@@ -72,7 +71,6 @@ static struct amba_device uart1_device = {
 		.flags	= IORESOURCE_MEM,
 	},
 	.irq		= { IRQ_UARTINT1, NO_IRQ },
-	.periphid	= 0x0041010,
 };
 
 static struct amba_device kmi0_device = {
@@ -85,7 +83,6 @@ static struct amba_device kmi0_device = {
 		.flags	= IORESOURCE_MEM,
 	},
 	.irq		= { IRQ_KMIINT0, NO_IRQ },
-	.periphid	= 0x00041050,
 };
 
 static struct amba_device kmi1_device = {
@@ -98,7 +95,6 @@ static struct amba_device kmi1_device = {
 		.flags	= IORESOURCE_MEM,
 	},
 	.irq		= { IRQ_KMIINT1, NO_IRQ },
-	.periphid	= 0x00041050,
 };
 
 static struct amba_device *amba_devs[] __initdata = {
@@ -157,6 +153,19 @@ static int __init integrator_init(void)
 {
 	int i;
 
+	/*
+	 * The Integrator/AP lacks necessary AMBA PrimeCell IDs, so we need to
+	 * hard-code them. The Integator/CP and forward have proper cell IDs.
+	 * Else we leave them undefined to the bus driver can autoprobe them.
+	 */
+	if (machine_is_integrator()) {
+		rtc_device.periphid	= 0x00041030;
+		uart0_device.periphid	= 0x00041010;
+		uart1_device.periphid	= 0x00041010;
+		kmi0_device.periphid	= 0x00041050;
+		kmi1_device.periphid	= 0x00041050;
+	}
+
 	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 		struct amba_device *d = amba_devs[i];
 		amba_device_register(d, &iomem_resource);
@@ -238,3 +247,11 @@ void __init integrator_reserve(void)
 {
 	memblock_reserve(PHYS_OFFSET, __pa(swapper_pg_dir) - PHYS_OFFSET);
 }
+
+/*
+ * To reset, we hit the on-board reset register in the system FPGA
+ */
+void integrator_restart(char mode, const char *cmd)
+{
+	cm_control(CM_CTRL_RESET, CM_CTRL_RESET);
+}
diff --git a/arch/arm/mach-integrator/include/mach/system.h b/arch/arm/mach-integrator/include/mach/system.h
index e1551b8..901514e 100644
--- a/arch/arm/mach-integrator/include/mach/system.h
+++ b/arch/arm/mach-integrator/include/mach/system.h
@@ -21,8 +21,6 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <mach/cm.h>
-
 static inline void arch_idle(void)
 {
 	/*
@@ -32,13 +30,4 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode, const char *cmd)
-{
-	/*
-	 * To reset, we hit the on-board reset register
-	 * in the system FPGA
-	 */
-	cm_control(CM_CTRL_RESET, CM_CTRL_RESET);
-}
-
 #endif
diff --git a/arch/arm/mach-integrator/include/mach/vmalloc.h b/arch/arm/mach-integrator/include/mach/vmalloc.h
deleted file mode 100644
index 2f5a2baf..0000000
--- a/arch/arm/mach-integrator/include/mach/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  arch/arm/mach-integrator/include/mach/vmalloc.h
- *
- *  Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define VMALLOC_END       0xd0000000UL
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index a1769f3..21a1d6c 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -472,4 +472,5 @@ MACHINE_START(INTEGRATOR, "ARM-Integrator")
 	.init_irq	= ap_init_irq,
 	.timer		= &ap_timer,
 	.init_machine	= ap_init,
+	.restart	= integrator_restart,
 MACHINE_END
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 5de49c3..a8b6aa6 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -14,7 +14,7 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/string.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/kmi.h>
 #include <linux/amba/clcd.h>
@@ -499,4 +499,5 @@ MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP")
 	.init_irq	= intcp_init_irq,
 	.timer		= &cp_timer,
 	.init_machine	= intcp_init,
+	.restart	= integrator_restart,
 MACHINE_END
diff --git a/arch/arm/mach-iop13xx/include/mach/iop13xx.h b/arch/arm/mach-iop13xx/include/mach/iop13xx.h
index 52b7fab..07e9ff7 100644
--- a/arch/arm/mach-iop13xx/include/mach/iop13xx.h
+++ b/arch/arm/mach-iop13xx/include/mach/iop13xx.h
@@ -10,6 +10,7 @@ void iop13xx_map_io(void);
 void iop13xx_platform_init(void);
 void iop13xx_add_tpmi_devices(void);
 void iop13xx_init_irq(void);
+void iop13xx_restart(char, const char *);
 
 /* CPUID CP6 R0 Page 0 */
 static inline int iop13xx_cpu_id(void)
diff --git a/arch/arm/mach-iop13xx/include/mach/system.h b/arch/arm/mach-iop13xx/include/mach/system.h
index d0c66ef..1f31ed3 100644
--- a/arch/arm/mach-iop13xx/include/mach/system.h
+++ b/arch/arm/mach-iop13xx/include/mach/system.h
@@ -7,21 +7,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <mach/iop13xx.h>
 static inline void arch_idle(void)
 {
 	cpu_do_idle();
 }
-
-static inline void arch_reset(char mode, const char *cmd)
-{
-	/*
-	 * Reset the internal bus (warning both cores are reset)
-	 */
-	write_wdtcr(IOP_WDTCR_EN_ARM);
-	write_wdtcr(IOP_WDTCR_EN);
-	write_wdtsr(IOP13XX_WDTSR_WRITE_EN | IOP13XX_WDTCR_IB_RESET);
-	write_wdtcr(0x1000);
-
-	for(;;);
-}
diff --git a/arch/arm/mach-iop13xx/include/mach/vmalloc.h b/arch/arm/mach-iop13xx/include/mach/vmalloc.h
deleted file mode 100644
index c534567..0000000
--- a/arch/arm/mach-iop13xx/include/mach/vmalloc.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef _VMALLOC_H_
-#define _VMALLOC_H_
-#define VMALLOC_END 	0xfa000000UL
-#endif
diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
index 4cf2cc4..abaee88 100644
--- a/arch/arm/mach-iop13xx/iq81340mc.c
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -96,4 +96,5 @@ MACHINE_START(IQ81340MC, "Intel IQ81340MC")
 	.init_irq       = iop13xx_init_irq,
 	.timer          = &iq81340mc_timer,
 	.init_machine   = iq81340mc_init,
+	.restart	= iop13xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
index cd9e274..690916a 100644
--- a/arch/arm/mach-iop13xx/iq81340sc.c
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -98,4 +98,5 @@ MACHINE_START(IQ81340SC, "Intel IQ81340SC")
 	.init_irq       = iop13xx_init_irq,
 	.timer          = &iq81340sc_timer,
 	.init_machine   = iq81340sc_init,
+	.restart	= iop13xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c
index a5b9897..daabb1f 100644
--- a/arch/arm/mach-iop13xx/setup.c
+++ b/arch/arm/mach-iop13xx/setup.c
@@ -606,3 +606,14 @@ static int __init iop13xx_init_adma_setup(char *str)
 __setup("iop13xx_init_adma", iop13xx_init_adma_setup);
 __setup("iop13xx_init_uart", iop13xx_init_uart_setup);
 __setup("iop13xx_init_i2c", iop13xx_init_i2c_setup);
+
+void iop13xx_restart(char mode, const char *cmd)
+{
+	/*
+	 * Reset the internal bus (warning both cores are reset)
+	 */
+	write_wdtcr(IOP_WDTCR_EN_ARM);
+	write_wdtcr(IOP_WDTCR_EN);
+	write_wdtsr(IOP13XX_WDTSR_WRITE_EN | IOP13XX_WDTCR_IB_RESET);
+	write_wdtcr(0x1000);
+}
diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c
index 4325055..24069e0 100644
--- a/arch/arm/mach-iop32x/em7210.c
+++ b/arch/arm/mach-iop32x/em7210.c
@@ -208,4 +208,5 @@ MACHINE_START(EM7210, "Lanner EM7210")
 	.init_irq	= iop32x_init_irq,
 	.timer		= &em7210_timer,
 	.init_machine	= em7210_init_machine,
+	.restart	= iop3xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index 0edc880..204e1d1 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -212,4 +212,5 @@ MACHINE_START(GLANTANK, "GLAN Tank")
 	.init_irq	= iop32x_init_irq,
 	.timer		= &glantank_timer,
 	.init_machine	= glantank_init_machine,
+	.restart	= iop3xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-iop32x/include/mach/io.h b/arch/arm/mach-iop32x/include/mach/io.h
index 059c783..2d88264 100644
--- a/arch/arm/mach-iop32x/include/mach/io.h
+++ b/arch/arm/mach-iop32x/include/mach/io.h
@@ -13,15 +13,8 @@
 
 #include <asm/hardware/iop3xx.h>
 
-extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size,
-	unsigned int mtype);
-extern void __iop3xx_iounmap(void __iomem *addr);
-
 #define IO_SPACE_LIMIT		0xffffffff
 #define __io(p)		((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p))
 #define __mem_pci(a)		(a)
 
-#define __arch_ioremap	__iop3xx_ioremap
-#define __arch_iounmap	__iop3xx_iounmap
-
 #endif
diff --git a/arch/arm/mach-iop32x/include/mach/system.h b/arch/arm/mach-iop32x/include/mach/system.h
index a4b808f..4a88727 100644
--- a/arch/arm/mach-iop32x/include/mach/system.h
+++ b/arch/arm/mach-iop32x/include/mach/system.h
@@ -7,28 +7,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <asm/mach-types.h>
-#include <asm/hardware/iop3xx.h>
-#include <mach/n2100.h>
-
 static inline void arch_idle(void)
 {
 	cpu_do_idle();
 }
-
-static inline void arch_reset(char mode, const char *cmd)
-{
-	local_irq_disable();
-
-	if (machine_is_n2100()) {
-		gpio_line_set(N2100_HARDWARE_RESET, GPIO_LOW);
-		gpio_line_config(N2100_HARDWARE_RESET, GPIO_OUT);
-		while (1)
-			;
-	}
-
-	*IOP3XX_PCSR = 0x30;
-
-	/* Jump into ROM at address 0 */
-	cpu_reset(0);
-}
diff --git a/arch/arm/mach-iop32x/include/mach/vmalloc.h b/arch/arm/mach-iop32x/include/mach/vmalloc.h
deleted file mode 100644
index c4862d4..0000000
--- a/arch/arm/mach-iop32x/include/mach/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-iop32x/include/mach/vmalloc.h
- */
-
-#define VMALLOC_END	0xfe000000UL
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
index 9e7aacc..3eb642a 100644
--- a/arch/arm/mach-iop32x/iq31244.c
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -318,6 +318,7 @@ MACHINE_START(IQ31244, "Intel IQ31244")
 	.init_irq	= iop32x_init_irq,
 	.timer		= &iq31244_timer,
 	.init_machine	= iq31244_init_machine,
+	.restart	= iop3xx_restart,
 MACHINE_END
 
 /* There should have been an ep80219 machine identifier from the beginning.
@@ -332,4 +333,5 @@ MACHINE_START(EP80219, "Intel EP80219")
 	.init_irq	= iop32x_init_irq,
 	.timer		= &iq31244_timer,
 	.init_machine	= iq31244_init_machine,
+	.restart	= iop3xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
index 53ea86f..2ec724b 100644
--- a/arch/arm/mach-iop32x/iq80321.c
+++ b/arch/arm/mach-iop32x/iq80321.c
@@ -191,4 +191,5 @@ MACHINE_START(IQ80321, "Intel IQ80321")
 	.init_irq	= iop32x_init_irq,
 	.timer		= &iq80321_timer,
 	.init_machine	= iq80321_init_machine,
+	.restart	= iop3xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index d726927..6b6d559 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -291,6 +291,14 @@ static void n2100_power_off(void)
 		;
 }
 
+static void n2100_restart(char mode, const char *cmd)
+{
+	gpio_line_set(N2100_HARDWARE_RESET, GPIO_LOW);
+	gpio_line_config(N2100_HARDWARE_RESET, GPIO_OUT);
+	while (1)
+		;
+}
+
 
 static struct timer_list power_button_poll_timer;
 
@@ -332,4 +340,5 @@ MACHINE_START(N2100, "Thecus N2100")
 	.init_irq	= iop32x_init_irq,
 	.timer		= &n2100_timer,
 	.init_machine	= n2100_init_machine,
+	.restart	= n2100_restart,
 MACHINE_END
diff --git a/arch/arm/mach-iop33x/include/mach/io.h b/arch/arm/mach-iop33x/include/mach/io.h
index 39e893e..a8a66fc 100644
--- a/arch/arm/mach-iop33x/include/mach/io.h
+++ b/arch/arm/mach-iop33x/include/mach/io.h
@@ -13,15 +13,8 @@
 
 #include <asm/hardware/iop3xx.h>
 
-extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size,
-	unsigned int mtype);
-extern void __iop3xx_iounmap(void __iomem *addr);
-
 #define IO_SPACE_LIMIT		0xffffffff
 #define __io(p)		((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p))
 #define __mem_pci(a)		(a)
 
-#define __arch_ioremap	__iop3xx_ioremap
-#define __arch_iounmap	__iop3xx_iounmap
-
 #endif
diff --git a/arch/arm/mach-iop33x/include/mach/system.h b/arch/arm/mach-iop33x/include/mach/system.h
index f192a34..4f98e76 100644
--- a/arch/arm/mach-iop33x/include/mach/system.h
+++ b/arch/arm/mach-iop33x/include/mach/system.h
@@ -7,17 +7,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <asm/hardware/iop3xx.h>
-
 static inline void arch_idle(void)
 {
 	cpu_do_idle();
 }
-
-static inline void arch_reset(char mode, const char *cmd)
-{
-	*IOP3XX_PCSR = 0x30;
-
-	/* Jump into ROM at address 0 */
-	cpu_reset(0);
-}
diff --git a/arch/arm/mach-iop33x/include/mach/vmalloc.h b/arch/arm/mach-iop33x/include/mach/vmalloc.h
deleted file mode 100644
index 48331dc..0000000
--- a/arch/arm/mach-iop33x/include/mach/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-iop33x/include/mach/vmalloc.h
- */
-
-#define VMALLOC_END	0xfe000000UL
diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c
index 9e14ccc..abce934 100644
--- a/arch/arm/mach-iop33x/iq80331.c
+++ b/arch/arm/mach-iop33x/iq80331.c
@@ -146,4 +146,5 @@ MACHINE_START(IQ80331, "Intel IQ80331")
 	.init_irq	= iop33x_init_irq,
 	.timer		= &iq80331_timer,
 	.init_machine	= iq80331_init_machine,
+	.restart	= iop3xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c
index 09c899a..7513559 100644
--- a/arch/arm/mach-iop33x/iq80332.c
+++ b/arch/arm/mach-iop33x/iq80332.c
@@ -146,4 +146,5 @@ MACHINE_START(IQ80332, "Intel IQ80332")
 	.init_irq	= iop33x_init_irq,
 	.timer		= &iq80332_timer,
 	.init_machine	= iq80332_init_machine,
+	.restart	= iop3xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c
index 24f0fe3..81c4537 100644
--- a/arch/arm/mach-ixp2000/core.c
+++ b/arch/arm/mach-ixp2000/core.c
@@ -515,3 +515,7 @@ void __init ixp2000_init_irq(void)
 	}
 }
 
+void ixp2000_restart(char mode, const char *cmd)
+{
+	ixp2000_reg_wrb(IXP2000_RESET0, RSTALL);
+}
diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c
index af99945..ee52541 100644
--- a/arch/arm/mach-ixp2000/enp2611.c
+++ b/arch/arm/mach-ixp2000/enp2611.c
@@ -259,6 +259,7 @@ MACHINE_START(ENP2611, "Radisys ENP-2611 PCI network processor board")
 	.init_irq	= ixp2000_init_irq,
 	.timer		= &enp2611_timer,
 	.init_machine	= enp2611_init_machine,
+	.restart	= ixp2000_restart,
 MACHINE_END
 
 
diff --git a/arch/arm/mach-ixp2000/include/mach/platform.h b/arch/arm/mach-ixp2000/include/mach/platform.h
index 42182c79..bb0f8dc 100644
--- a/arch/arm/mach-ixp2000/include/mach/platform.h
+++ b/arch/arm/mach-ixp2000/include/mach/platform.h
@@ -122,6 +122,7 @@ void ixp2000_map_io(void);
 void ixp2000_uart_init(void);
 void ixp2000_init_irq(void);
 void ixp2000_init_time(unsigned long);
+void ixp2000_restart(char, const char *);
 unsigned long ixp2000_gettimeoffset(void);
 
 struct pci_sys_data;
diff --git a/arch/arm/mach-ixp2000/include/mach/system.h b/arch/arm/mach-ixp2000/include/mach/system.h
index de37099..a7fb08b 100644
--- a/arch/arm/mach-ixp2000/include/mach/system.h
+++ b/arch/arm/mach-ixp2000/include/mach/system.h
@@ -8,42 +8,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
 static inline void arch_idle(void)
 {
 	cpu_do_idle();
 }
-
-static inline void arch_reset(char mode, const char *cmd)
-{
-	local_irq_disable();
-
-	/*
-	 * Reset flash banking register so that we are pointing at
-	 * RedBoot bank.
-	 */
-	if (machine_is_ixdp2401()) {
-		ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG,
-					((0 >> IXDP2X01_FLASH_WINDOW_BITS)
-						| IXDP2X01_CPLD_FLASH_INTERN));
-		ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0xffffffff);
-	}
-
-	/*
-	 * On IXDP2801 we need to write this magic sequence to the CPLD
-	 * to cause a complete reset of the CPU and all external devices
-	 * and move the flash bank register back to 0.
-	 */
-	if (machine_is_ixdp2801() || machine_is_ixdp28x5()) {
-		unsigned long reset_reg = *IXDP2X01_CPLD_RESET_REG;
-
-		reset_reg = 0x55AA0000 | (reset_reg & 0x0000FFFF);
-		ixp2000_reg_write(IXDP2X01_CPLD_RESET_REG, reset_reg);
-		ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0x80000000);
-	}
-
-	ixp2000_reg_wrb(IXP2000_RESET0, RSTALL);
-}
diff --git a/arch/arm/mach-ixp2000/include/mach/vmalloc.h b/arch/arm/mach-ixp2000/include/mach/vmalloc.h
deleted file mode 100644
index 61c8dae..0000000
--- a/arch/arm/mach-ixp2000/include/mach/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/include/mach/vmalloc.h
- *
- * Author: Naeem Afzal <naeem.m.afzal@intel.com>
- *
- * Copyright 2002 Intel Corp.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- * Just any arbitrary offset to the start of the vmalloc VM area: the
- * current 8MB value just means that there will be a 8MB "hole" after the
- * physical memory until the kernel virtual memory starts.  That means that
- * any out-of-bounds memory accesses will hopefully be caught.
- * The vmalloc() routines leaves a hole of 4kB between each vmalloced
- * area for the same reason. ;)
- */
-#define VMALLOC_END	    0xfb000000UL
diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c
index f7dfd97..f53e911 100644
--- a/arch/arm/mach-ixp2000/ixdp2400.c
+++ b/arch/arm/mach-ixp2000/ixdp2400.c
@@ -176,5 +176,6 @@ MACHINE_START(IXDP2400, "Intel IXDP2400 Development Platform")
 	.init_irq	= ixdp2400_init_irq,
 	.timer		= &ixdp2400_timer,
 	.init_machine	= ixdp2x00_init_machine,
+	.restart	= ixp2000_restart,
 MACHINE_END
 
diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c
index d33bcac..a2e7c39 100644
--- a/arch/arm/mach-ixp2000/ixdp2800.c
+++ b/arch/arm/mach-ixp2000/ixdp2800.c
@@ -291,5 +291,6 @@ MACHINE_START(IXDP2800, "Intel IXDP2800 Development Platform")
 	.init_irq	= ixdp2800_init_irq,
 	.timer		= &ixdp2800_timer,
 	.init_machine	= ixdp2x00_init_machine,
+	.restart	= ixp2000_restart,
 MACHINE_END
 
diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c
index 61a2867..7632bea 100644
--- a/arch/arm/mach-ixp2000/ixdp2x01.c
+++ b/arch/arm/mach-ixp2000/ixdp2x01.c
@@ -413,6 +413,35 @@ static void __init ixdp2x01_init_machine(void)
 	ixdp2x01_uart_init();
 }
 
+static void ixdp2401_restart(char mode, const char *cmd)
+{
+	/*
+	 * Reset flash banking register so that we are pointing at
+	 * RedBoot bank.
+	 */
+	ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG,
+				((0 >> IXDP2X01_FLASH_WINDOW_BITS)
+					| IXDP2X01_CPLD_FLASH_INTERN));
+	ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0xffffffff);
+
+	ixp2000_restart(mode, cmd);
+}
+
+static void ixdp280x_restart(char mode, const char *cmd)
+{
+	/*
+	 * On IXDP2801 we need to write this magic sequence to the CPLD
+	 * to cause a complete reset of the CPU and all external devices
+	 * and move the flash bank register back to 0.
+	 */
+	unsigned long reset_reg = *IXDP2X01_CPLD_RESET_REG;
+
+	reset_reg = 0x55AA0000 | (reset_reg & 0x0000FFFF);
+	ixp2000_reg_write(IXDP2X01_CPLD_RESET_REG, reset_reg);
+	ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0x80000000);
+
+	ixp2000_restart(mode, cmd);
+}
 
 #ifdef CONFIG_ARCH_IXDP2401
 MACHINE_START(IXDP2401, "Intel IXDP2401 Development Platform")
@@ -422,6 +451,7 @@ MACHINE_START(IXDP2401, "Intel IXDP2401 Development Platform")
 	.init_irq	= ixdp2x01_init_irq,
 	.timer		= &ixdp2x01_timer,
 	.init_machine	= ixdp2x01_init_machine,
+	.restart	= ixdp2401_restart,
 MACHINE_END
 #endif
 
@@ -433,6 +463,7 @@ MACHINE_START(IXDP2801, "Intel IXDP2801 Development Platform")
 	.init_irq	= ixdp2x01_init_irq,
 	.timer		= &ixdp2x01_timer,
 	.init_machine	= ixdp2x01_init_machine,
+	.restart	= ixdp280x_restart,
 MACHINE_END
 
 /*
@@ -446,6 +477,7 @@ MACHINE_START(IXDP28X5, "Intel IXDP2805/2855 Development Platform")
 	.init_irq	= ixdp2x01_init_irq,
 	.timer		= &ixdp2x01_timer,
 	.init_machine	= ixdp2x01_init_machine,
+	.restart	= ixdp280x_restart,
 MACHINE_END
 #endif
 
diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c
index a1bee33..0923bb9 100644
--- a/arch/arm/mach-ixp23xx/core.c
+++ b/arch/arm/mach-ixp23xx/core.c
@@ -444,3 +444,9 @@ void __init ixp23xx_sys_init(void)
 	*IXP23XX_EXP_UNIT_FUSE |= 0xf;
 	platform_add_devices(ixp23xx_devices, ARRAY_SIZE(ixp23xx_devices));
 }
+
+void ixp23xx_restart(char mode, const char *cmd)
+{
+	/* Use on-chip reset capability */
+	*IXP23XX_RESET0 |= IXP23XX_RST_ALL;
+}
diff --git a/arch/arm/mach-ixp23xx/espresso.c b/arch/arm/mach-ixp23xx/espresso.c
index 30dd316..8f2487e 100644
--- a/arch/arm/mach-ixp23xx/espresso.c
+++ b/arch/arm/mach-ixp23xx/espresso.c
@@ -90,4 +90,5 @@ MACHINE_START(ESPRESSO, "IP Fabrics Double Espresso")
 	.timer		= &ixp23xx_timer,
 	.atag_offset	= 0x100,
 	.init_machine	= espresso_init,
+	.restart	= ixp23xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ixp23xx/include/mach/io.h b/arch/arm/mach-ixp23xx/include/mach/io.h
index a1749d0..4ce4353 100644
--- a/arch/arm/mach-ixp23xx/include/mach/io.h
+++ b/arch/arm/mach-ixp23xx/include/mach/io.h
@@ -20,33 +20,4 @@
 #define __io(p)		((void __iomem*)((p) + IXP23XX_PCI_IO_VIRT))
 #define __mem_pci(a)	(a)
 
-static inline void __iomem *
-ixp23xx_ioremap(unsigned long addr, unsigned long size, unsigned int mtype)
-{
-	if (addr >= IXP23XX_PCI_MEM_START &&
-		addr <= IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE) {
-		if (addr + size > IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE)
-			return NULL;
-
-		return (void __iomem *)
- 			((addr - IXP23XX_PCI_MEM_START) + IXP23XX_PCI_MEM_VIRT);
-	}
-
-	return __arm_ioremap(addr, size, mtype);
-}
-
-static inline void
-ixp23xx_iounmap(void __iomem *addr)
-{
-	if ((((u32)addr) >= IXP23XX_PCI_MEM_VIRT) &&
-	    (((u32)addr) < IXP23XX_PCI_MEM_VIRT + IXP23XX_PCI_MEM_SIZE))
-		return;
-
-	__iounmap(addr);
-}
-
-#define __arch_ioremap	ixp23xx_ioremap
-#define __arch_iounmap	ixp23xx_iounmap
-
-
 #endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/platform.h b/arch/arm/mach-ixp23xx/include/mach/platform.h
index db9d941..50de558 100644
--- a/arch/arm/mach-ixp23xx/include/mach/platform.h
+++ b/arch/arm/mach-ixp23xx/include/mach/platform.h
@@ -34,6 +34,7 @@ struct pci_sys_data;
 void ixp23xx_map_io(void);
 void ixp23xx_init_irq(void);
 void ixp23xx_sys_init(void);
+void ixp23xx_restart(char, const char *);
 int ixp23xx_pci_setup(int, struct pci_sys_data *);
 void ixp23xx_pci_preinit(void);
 struct pci_bus *ixp23xx_pci_scan_bus(int, struct pci_sys_data*);
diff --git a/arch/arm/mach-ixp23xx/include/mach/system.h b/arch/arm/mach-ixp23xx/include/mach/system.h
index 8920ff2..277dda7 100644
--- a/arch/arm/mach-ixp23xx/include/mach/system.h
+++ b/arch/arm/mach-ixp23xx/include/mach/system.h
@@ -7,10 +7,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
 static inline void arch_idle(void)
 {
 #if 0
@@ -18,16 +14,3 @@ static inline void arch_idle(void)
 		cpu_do_idle();
 #endif
 }
-
-static inline void arch_reset(char mode, const char *cmd)
-{
-	/* First try machine specific support */
-	if (machine_is_ixdp2351()) {
-		*IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_MAGIC;
-		(void) *IXDP2351_CPLD_RESET1_REG;
-		*IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_ENABLE;
-	}
-
-	/* Use on-chip reset capability */
-	*IXP23XX_RESET0 |= IXP23XX_RST_ALL;
-}
diff --git a/arch/arm/mach-ixp23xx/include/mach/vmalloc.h b/arch/arm/mach-ixp23xx/include/mach/vmalloc.h
deleted file mode 100644
index 896c56a..0000000
--- a/arch/arm/mach-ixp23xx/include/mach/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * arch/arm/mach-ixp23xx/include/mach/vmalloc.h
- *
- * Copyright (c) 2005 MontaVista Software, Inc.
- *
- * NPU mappings end at 0xf0000000 and we allocate 64MB for board
- * specific static I/O.
- */
-
-#define VMALLOC_END	(0xec000000UL)
diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c
index b3a57e0..5d5dd3e 100644
--- a/arch/arm/mach-ixp23xx/ixdp2351.c
+++ b/arch/arm/mach-ixp23xx/ixdp2351.c
@@ -326,6 +326,17 @@ static void __init ixdp2351_init(void)
 	ixp23xx_sys_init();
 }
 
+static void ixdp2351_restart(char mode, const char *cmd)
+{
+	/* First try machine specific support */
+
+	*IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_MAGIC;
+	(void) *IXDP2351_CPLD_RESET1_REG;
+	*IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_ENABLE;
+
+	ixp23xx_restart(mode, cmd);
+}
+
 MACHINE_START(IXDP2351, "Intel IXDP2351 Development Platform")
 	/* Maintainer: MontaVista Software, Inc. */
 	.map_io		= ixdp2351_map_io,
@@ -333,4 +344,5 @@ MACHINE_START(IXDP2351, "Intel IXDP2351 Development Platform")
 	.timer		= &ixp23xx_timer,
 	.atag_offset	= 0x100,
 	.init_machine	= ixdp2351_init,
+	.restart	= ixdp2351_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c
index 8f4dcbb..377283f 100644
--- a/arch/arm/mach-ixp23xx/roadrunner.c
+++ b/arch/arm/mach-ixp23xx/roadrunner.c
@@ -177,4 +177,5 @@ MACHINE_START(ROADRUNNER, "ADI Engineering RoadRunner Development Platform")
 	.timer		= &ixp23xx_timer,
 	.atag_offset	= 0x100,
 	.init_machine	= roadrunner_init,
+	.restart	= ixp23xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c
index 37609a2..a7277ad 100644
--- a/arch/arm/mach-ixp4xx/avila-setup.c
+++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -172,6 +172,7 @@ MACHINE_START(AVILA, "Gateworks Avila Network Platform")
 #if defined(CONFIG_PCI)
 	.dma_zone_size	= SZ_64M,
 #endif
+	.restart	= ixp4xx_restart,
 MACHINE_END
 
  /*
@@ -190,6 +191,7 @@ MACHINE_START(LOFT, "Giant Shoulder Inc Loft board")
 #if defined(CONFIG_PCI)
 	.dma_zone_size	= SZ_64M,
 #endif
+	.restart	= ixp4xx_restart,
 MACHINE_END
 #endif
 
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index b86a005..3841ab4 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -17,7 +17,6 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/serial.h>
-#include <linux/sched.h>
 #include <linux/tty.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
@@ -403,18 +402,9 @@ void __init ixp4xx_sys_init(void)
 /*
  * sched_clock()
  */
-static DEFINE_CLOCK_DATA(cd);
-
-unsigned long long notrace sched_clock(void)
-{
-	u32 cyc = *IXP4XX_OSTS;
-	return cyc_to_sched_clock(&cd, cyc, (u32)~0);
-}
-
-static void notrace ixp4xx_update_sched_clock(void)
+static u32 notrace ixp4xx_read_sched_clock(void)
 {
-	u32 cyc = *IXP4XX_OSTS;
-	update_sched_clock(&cd, cyc, (u32)~0);
+	return *IXP4XX_OSTS;
 }
 
 /*
@@ -430,7 +420,7 @@ unsigned long ixp4xx_timer_freq = IXP4XX_TIMER_FREQ;
 EXPORT_SYMBOL(ixp4xx_timer_freq);
 static void __init ixp4xx_clocksource_init(void)
 {
-	init_sched_clock(&cd, ixp4xx_update_sched_clock, 32, ixp4xx_timer_freq);
+	setup_sched_clock(ixp4xx_read_sched_clock, 32, ixp4xx_timer_freq);
 
 	clocksource_mmio_init(NULL, "OSTS", ixp4xx_timer_freq, 200, 32,
 			ixp4xx_clocksource_read);
@@ -501,3 +491,23 @@ static void __init ixp4xx_clockevent_init(void)
 
 	clockevents_register_device(&clockevent_ixp4xx);
 }
+
+void ixp4xx_restart(char mode, const char *cmd)
+{
+	if ( 1 && mode == 's') {
+		/* Jump into ROM at address 0 */
+		soft_restart(0);
+	} else {
+		/* Use on-chip reset capability */
+
+		/* set the "key" register to enable access to
+		 * "timer" and "enable" registers
+		 */
+		*IXP4XX_OSWK = IXP4XX_WDT_KEY;
+
+		/* write 0 to the timer register for an immediate reset */
+		*IXP4XX_OSWT = 0;
+
+		*IXP4XX_OSWE = IXP4XX_WDT_RESET_ENABLE | IXP4XX_WDT_COUNT_ENABLE;
+	}
+}
diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
index 81dfec3..a74f86c 100644
--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -117,6 +117,7 @@ MACHINE_START(ADI_COYOTE, "ADI Engineering Coyote")
 #if defined(CONFIG_PCI)
 	.dma_zone_size	= SZ_64M,
 #endif
+	.restart	= ixp4xx_restart,
 MACHINE_END
 #endif
 
@@ -132,6 +133,7 @@ MACHINE_START(IXDPG425, "Intel IXDPG425")
 	.timer		= &ixp4xx_timer,
 	.atag_offset	= 0x100,
 	.init_machine	= coyote_init,
+	.restart	= ixp4xx_restart,
 MACHINE_END
 #endif
 
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index 8837fbc..67be177 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -286,4 +286,5 @@ MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")
 #if defined(CONFIG_PCI)
 	.dma_zone_size	= SZ_64M,
 #endif
+	.restart	= ixp4xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
index 2887c35..6d58182 100644
--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -277,5 +277,6 @@ MACHINE_START(FSG, "Freecom FSG-3")
 #if defined(CONFIG_PCI)
 	.dma_zone_size	= SZ_64M,
 #endif
+	.restart	= ixp4xx_restart,
 MACHINE_END
 
diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c
index d69d1b0..7ecf9b2 100644
--- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
+++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c
@@ -104,5 +104,6 @@ MACHINE_START(GATEWAY7001, "Gateway 7001 AP")
 #if defined(CONFIG_PCI)
 	.dma_zone_size	= SZ_64M,
 #endif
+	.restart	= ixp4xx_restart,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
index bf6678d..c0e3d69 100644
--- a/arch/arm/mach-ixp4xx/goramo_mlr.c
+++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
@@ -504,4 +504,5 @@ MACHINE_START(GORAMO_MLR, "MultiLink")
 #if defined(CONFIG_PCI)
 	.dma_zone_size	= SZ_64M,
 #endif
+	.restart	= ixp4xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
index aa029fc..a23f893 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -172,6 +172,7 @@ MACHINE_START(GTWX5715, "Gemtek GTWX5715 (Linksys WRV54G)")
 #if defined(CONFIG_PCI)
 	.dma_zone_size	= SZ_64M,
 #endif
+	.restart	= ixp4xx_restart,
 MACHINE_END
 
 
diff --git a/arch/arm/mach-ixp4xx/include/mach/platform.h b/arch/arm/mach-ixp4xx/include/mach/platform.h
index e824c02..df9250b 100644
--- a/arch/arm/mach-ixp4xx/include/mach/platform.h
+++ b/arch/arm/mach-ixp4xx/include/mach/platform.h
@@ -125,6 +125,7 @@ extern void ixp4xx_init_irq(void);
 extern void ixp4xx_sys_init(void);
 extern void ixp4xx_timer_init(void);
 extern struct sys_timer ixp4xx_timer;
+extern void ixp4xx_restart(char, const char *);
 extern void ixp4xx_pci_preinit(void);
 struct pci_sys_data;
 extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
diff --git a/arch/arm/mach-ixp4xx/include/mach/system.h b/arch/arm/mach-ixp4xx/include/mach/system.h
index 54c0af7..140a9be 100644
--- a/arch/arm/mach-ixp4xx/include/mach/system.h
+++ b/arch/arm/mach-ixp4xx/include/mach/system.h
@@ -8,9 +8,6 @@
  * published by the Free Software Foundation.
  *
  */
-
-#include <mach/hardware.h>
-
 static inline void arch_idle(void)
 {
 	/* ixp4xx does not implement the XScale PWRMODE register,
@@ -20,25 +17,3 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 #endif
 }
-
-
-static inline void arch_reset(char mode, const char *cmd)
-{
-	if ( 1 && mode == 's') {
-		/* Jump into ROM at address 0 */
-		cpu_reset(0);
-	} else {
-		/* Use on-chip reset capability */
-
-		/* set the "key" register to enable access to
-		 * "timer" and "enable" registers
-		 */
-		*IXP4XX_OSWK = IXP4XX_WDT_KEY;
-
-		/* write 0 to the timer register for an immediate reset */
-		*IXP4XX_OSWT = 0;
-
-		*IXP4XX_OSWE = IXP4XX_WDT_RESET_ENABLE | IXP4XX_WDT_COUNT_ENABLE;
-	}
-}
-
diff --git a/arch/arm/mach-ixp4xx/include/mach/vmalloc.h b/arch/arm/mach-ixp4xx/include/mach/vmalloc.h
deleted file mode 100644
index 9bcd64d..0000000
--- a/arch/arm/mach-ixp4xx/include/mach/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/vmalloc.h
- */
-#define VMALLOC_END       (0xff000000UL)
-
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index f235f82..8a38b39 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -261,6 +261,7 @@ MACHINE_START(IXDP425, "Intel IXDP425 Development Platform")
 #if defined(CONFIG_PCI)
 	.dma_zone_size	= SZ_64M,
 #endif
+	.restart	= ixp4xx_restart,
 MACHINE_END
 #endif
 
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index de716fa..1010eb7b 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -321,4 +321,5 @@ MACHINE_START(NAS100D, "Iomega NAS 100d")
 #if defined(CONFIG_PCI)
 	.dma_zone_size	= SZ_64M,
 #endif
+	.restart	= ixp4xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index ac81ccb..aa355c3 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -307,4 +307,5 @@ MACHINE_START(NSLU2, "Linksys NSLU2")
 #if defined(CONFIG_PCI)
 	.dma_zone_size	= SZ_64M,
 #endif
+	.restart	= ixp4xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/omixp-setup.c b/arch/arm/mach-ixp4xx/omixp-setup.c
index 3b6a81a..0940869 100644
--- a/arch/arm/mach-ixp4xx/omixp-setup.c
+++ b/arch/arm/mach-ixp4xx/omixp-setup.c
@@ -246,6 +246,7 @@ MACHINE_START(DEVIXP, "Omicron DEVIXP")
 	.init_irq	= ixp4xx_init_irq,
 	.timer          = &ixp4xx_timer,
 	.init_machine	= omixp_init,
+	.restart	= ixp4xx_restart,
 MACHINE_END
 #endif
 
@@ -259,6 +260,7 @@ MACHINE_START(MICCPT, "Omicron MICCPT")
 #if defined(CONFIG_PCI)
 	.dma_zone_size	= SZ_64M,
 #endif
+	.restart	= ixp4xx_restart,
 MACHINE_END
 #endif
 
@@ -269,5 +271,6 @@ MACHINE_START(MIC256, "Omicron MIC256")
 	.init_irq	= ixp4xx_init_irq,
 	.timer          = &ixp4xx_timer,
 	.init_machine	= omixp_init,
+	.restart	= ixp4xx_restart,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c
index 27e469e..9dec206 100644
--- a/arch/arm/mach-ixp4xx/vulcan-setup.c
+++ b/arch/arm/mach-ixp4xx/vulcan-setup.c
@@ -244,4 +244,5 @@ MACHINE_START(ARCOM_VULCAN, "Arcom/Eurotech Vulcan")
 #if defined(CONFIG_PCI)
 	.dma_zone_size	= SZ_64M,
 #endif
+	.restart	= ixp4xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c
index b14144b..5ac0f0a 100644
--- a/arch/arm/mach-ixp4xx/wg302v2-setup.c
+++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c
@@ -105,5 +105,6 @@ MACHINE_START(WG302V2, "Netgear WG302 v2 / WAG302 v2")
 #if defined(CONFIG_PCI)
 	.dma_zone_size	= SZ_64M,
 #endif
+	.restart	= ixp4xx_restart,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index f3248cf..0bff4a9 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -534,3 +534,19 @@ static int __init kirkwood_clock_gate(void)
 	return 0;
 }
 late_initcall(kirkwood_clock_gate);
+
+void kirkwood_restart(char mode, const char *cmd)
+{
+	/*
+	 * Enable soft reset to assert RSTOUTn.
+	 */
+	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+	/*
+	 * Assert soft reset.
+	 */
+	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+	while (1)
+		;
+}
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index b9b0f09..1529280 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -50,6 +50,7 @@ void kirkwood_uart1_init(void);
 void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay);
 void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, int (*dev_ready)(struct mtd_info *));
 void kirkwood_audio_init(void);
+void kirkwood_restart(char, const char *);
 
 extern int kirkwood_tclk;
 extern struct sys_timer kirkwood_timer;
diff --git a/arch/arm/mach-kirkwood/d2net_v2-setup.c b/arch/arm/mach-kirkwood/d2net_v2-setup.c
index f457e07..6e1bac9 100644
--- a/arch/arm/mach-kirkwood/d2net_v2-setup.c
+++ b/arch/arm/mach-kirkwood/d2net_v2-setup.c
@@ -227,4 +227,5 @@ MACHINE_START(D2NET_V2, "LaCie d2 Network v2")
 	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &kirkwood_timer,
+	.restart	= kirkwood_restart,
 MACHINE_END
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
index ff4c21c..d933593 100644
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -103,4 +103,5 @@ MACHINE_START(DB88F6281_BP, "Marvell DB-88F6281-BP Development Board")
 	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &kirkwood_timer,
+	.restart	= kirkwood_restart,
 MACHINE_END
diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c
index e4d199b..61d9a55 100644
--- a/arch/arm/mach-kirkwood/dockstar-setup.c
+++ b/arch/arm/mach-kirkwood/dockstar-setup.c
@@ -108,4 +108,5 @@ MACHINE_START(DOCKSTAR, "Seagate FreeAgent DockStar")
 	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &kirkwood_timer,
+	.restart	= kirkwood_restart,
 MACHINE_END
diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c
index 6c40f78..bdaed38 100644
--- a/arch/arm/mach-kirkwood/guruplug-setup.c
+++ b/arch/arm/mach-kirkwood/guruplug-setup.c
@@ -127,4 +127,5 @@ MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board")
 	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &kirkwood_timer,
+	.restart	= kirkwood_restart,
 MACHINE_END
diff --git a/arch/arm/mach-kirkwood/include/mach/io.h b/arch/arm/mach-kirkwood/include/mach/io.h
index 1aaddc3..49dd0cb 100644
--- a/arch/arm/mach-kirkwood/include/mach/io.h
+++ b/arch/arm/mach-kirkwood/include/mach/io.h
@@ -19,31 +19,6 @@ static inline void __iomem *__io(unsigned long addr)
 					+ KIRKWOOD_PCIE_IO_VIRT_BASE);
 }
 
-static inline void __iomem *
-__arch_ioremap(unsigned long paddr, size_t size, unsigned int mtype)
-{
-	void __iomem *retval;
-	unsigned long offs = paddr - KIRKWOOD_REGS_PHYS_BASE;
-	if (mtype == MT_DEVICE && size && offs < KIRKWOOD_REGS_SIZE &&
-	    size <= KIRKWOOD_REGS_SIZE && offs + size <= KIRKWOOD_REGS_SIZE) {
-		retval = (void __iomem *)KIRKWOOD_REGS_VIRT_BASE + offs;
-	} else {
-		retval = __arm_ioremap(paddr, size, mtype);
-	}
-
-	return retval;
-}
-
-static inline void
-__arch_iounmap(void __iomem *addr)
-{
-	if (addr < (void __iomem *)KIRKWOOD_REGS_VIRT_BASE ||
-	    addr >= (void __iomem *)(KIRKWOOD_REGS_VIRT_BASE + KIRKWOOD_REGS_SIZE))
-		__iounmap(addr);
-}
-
-#define __arch_ioremap		__arch_ioremap
-#define __arch_iounmap		__arch_iounmap
 #define __io(a)			__io(a)
 #define __mem_pci(a)		(a)
 
diff --git a/arch/arm/mach-kirkwood/include/mach/system.h b/arch/arm/mach-kirkwood/include/mach/system.h
index 7568e95..5fddde0 100644
--- a/arch/arm/mach-kirkwood/include/mach/system.h
+++ b/arch/arm/mach-kirkwood/include/mach/system.h
@@ -9,28 +9,9 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <mach/bridge-regs.h>
-
 static inline void arch_idle(void)
 {
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode, const char *cmd)
-{
-	/*
-	 * Enable soft reset to assert RSTOUTn.
-	 */
-	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
-
-	/*
-	 * Assert soft reset.
-	 */
-	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
-
-	while (1)
-		;
-}
-
-
 #endif
diff --git a/arch/arm/mach-kirkwood/include/mach/vmalloc.h b/arch/arm/mach-kirkwood/include/mach/vmalloc.h
deleted file mode 100644
index bf162ca..0000000
--- a/arch/arm/mach-kirkwood/include/mach/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/vmalloc.h
- */
-
-#define VMALLOC_END	0xfe800000UL
diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
index 9a1e917..85f6169 100644
--- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
+++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
@@ -169,4 +169,5 @@ MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board")
 	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &kirkwood_timer,
+	.restart	= kirkwood_restart,
 MACHINE_END
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
index 8849bcc..e6bba01 100644
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -264,6 +264,7 @@ MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
 	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &kirkwood_timer,
+	.restart	= kirkwood_restart,
 MACHINE_END
 #endif
 
@@ -275,6 +276,7 @@ MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2")
 	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &kirkwood_timer,
+	.restart	= kirkwood_restart,
 MACHINE_END
 #endif
 
@@ -286,5 +288,6 @@ MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2")
 	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &kirkwood_timer,
+	.restart	= kirkwood_restart,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
index 1ba12c4..31ae8de 100644
--- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
@@ -405,6 +405,7 @@ MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2")
 	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &kirkwood_timer,
+	.restart	= kirkwood_restart,
 MACHINE_END
 #endif
 
@@ -416,5 +417,6 @@ MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2")
 	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &kirkwood_timer,
+	.restart	= kirkwood_restart,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
index 5660ca6..01f8c89 100644
--- a/arch/arm/mach-kirkwood/openrd-setup.c
+++ b/arch/arm/mach-kirkwood/openrd-setup.c
@@ -220,6 +220,7 @@ MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
 	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &kirkwood_timer,
+	.restart	= kirkwood_restart,
 MACHINE_END
 #endif
 
@@ -232,6 +233,7 @@ MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board")
 	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &kirkwood_timer,
+	.restart	= kirkwood_restart,
 MACHINE_END
 #endif
 
@@ -244,5 +246,6 @@ MACHINE_START(OPENRD_ULTIMATE, "Marvell OpenRD Ultimate Board")
 	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &kirkwood_timer,
+	.restart	= kirkwood_restart,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index 6663869..fd2c9c8 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -85,4 +85,5 @@ MACHINE_START(RD88F6192_NAS, "Marvell RD-88F6192-NAS Development Board")
 	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &kirkwood_timer,
+	.restart	= kirkwood_restart,
 MACHINE_END
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index 66b3c05..ef92207 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -121,4 +121,5 @@ MACHINE_START(RD88F6281, "Marvell RD-88F6281 Reference Board")
 	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &kirkwood_timer,
+	.restart	= kirkwood_restart,
 MACHINE_END
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
index 8b102d6..4ea70e5 100644
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -107,7 +107,7 @@ static void __init sheevaplug_init(void)
 	kirkwood_init();
 
 	/* setup gpio pin select */
-	if (machine_is_sheeva_esata())
+	if (machine_is_esata_sheevaplug())
 		kirkwood_mpp_conf(sheeva_esata_mpp_config);
 	else
 		kirkwood_mpp_conf(sheevaplug_mpp_config);
@@ -123,11 +123,11 @@ static void __init sheevaplug_init(void)
 	kirkwood_ge00_init(&sheevaplug_ge00_data);
 
 	/* honor lower power consumption for plugs with out eSATA */
-	if (machine_is_sheeva_esata())
+	if (machine_is_esata_sheevaplug())
 		kirkwood_sata_init(&sheeva_esata_sata_data);
 
 	/* enable sd wp and sd cd on plugs with esata */
-	if (machine_is_sheeva_esata())
+	if (machine_is_esata_sheevaplug())
 		kirkwood_sdio_init(&sheeva_esata_mvsdio_data);
 	else
 		kirkwood_sdio_init(&sheevaplug_mvsdio_data);
@@ -144,6 +144,7 @@ MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
 	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &kirkwood_timer,
+	.restart	= kirkwood_restart,
 MACHINE_END
 #endif
 
@@ -155,5 +156,6 @@ MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board")
 	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &kirkwood_timer,
+	.restart	= kirkwood_restart,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c
index ea104fb..966b2b3 100644
--- a/arch/arm/mach-kirkwood/t5325-setup.c
+++ b/arch/arm/mach-kirkwood/t5325-setup.c
@@ -207,4 +207,5 @@ MACHINE_START(T5325, "HP t5325 Thin Client")
 	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &kirkwood_timer,
+	.restart	= kirkwood_restart,
 MACHINE_END
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
index 262c034..73e2b6c 100644
--- a/arch/arm/mach-kirkwood/ts219-setup.c
+++ b/arch/arm/mach-kirkwood/ts219-setup.c
@@ -138,4 +138,5 @@ MACHINE_START(TS219, "QNAP TS-119/TS-219")
 	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &kirkwood_timer,
+	.restart	= kirkwood_restart,
 MACHINE_END
diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c
index b68f5b4..5bbca26 100644
--- a/arch/arm/mach-kirkwood/ts41x-setup.c
+++ b/arch/arm/mach-kirkwood/ts41x-setup.c
@@ -182,4 +182,5 @@ MACHINE_START(TS41X, "QNAP TS-41x")
 	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &kirkwood_timer,
+	.restart	= kirkwood_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c
index a91f99d..255502d 100644
--- a/arch/arm/mach-ks8695/board-acs5k.c
+++ b/arch/arm/mach-ks8695/board-acs5k.c
@@ -228,4 +228,5 @@ MACHINE_START(ACS5K, "Brivo Systems LLC ACS-5000 Master board")
 	.init_irq	= ks8695_init_irq,
 	.init_machine	= acs5k_init,
 	.timer		= &ks8695_timer,
+	.restart	= ks8695_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ks8695/board-dsm320.c b/arch/arm/mach-ks8695/board-dsm320.c
index d24bcef..e0d36ce 100644
--- a/arch/arm/mach-ks8695/board-dsm320.c
+++ b/arch/arm/mach-ks8695/board-dsm320.c
@@ -126,4 +126,5 @@ MACHINE_START(DSM320, "D-Link DSM-320 Wireless Media Player")
 	.init_irq	= ks8695_init_irq,
 	.init_machine	= dsm320_init,
 	.timer		= &ks8695_timer,
+	.restart	= ks8695_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c
index 16c9565..a827072 100644
--- a/arch/arm/mach-ks8695/board-micrel.c
+++ b/arch/arm/mach-ks8695/board-micrel.c
@@ -58,4 +58,5 @@ MACHINE_START(KS8695, "KS8695 Centaur Development Board")
 	.init_irq	= ks8695_init_irq,
 	.init_machine	= micrel_init,
 	.timer		= &ks8695_timer,
+	.restart	= ks8695_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ks8695/generic.h b/arch/arm/mach-ks8695/generic.h
index 2fbfab8..f8bdb11 100644
--- a/arch/arm/mach-ks8695/generic.h
+++ b/arch/arm/mach-ks8695/generic.h
@@ -12,4 +12,5 @@
 
 extern __init void ks8695_map_io(void);
 extern __init void ks8695_init_irq(void);
+extern void ks8695_restart(char, const char *);
 extern struct sys_timer ks8695_timer;
diff --git a/arch/arm/mach-ks8695/include/mach/system.h b/arch/arm/mach-ks8695/include/mach/system.h
index fb1dda9..59fe992 100644
--- a/arch/arm/mach-ks8695/include/mach/system.h
+++ b/arch/arm/mach-ks8695/include/mach/system.h
@@ -14,9 +14,6 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <linux/io.h>
-#include <mach/regs-timer.h>
-
 static void arch_idle(void)
 {
 	/*
@@ -27,22 +24,4 @@ static void arch_idle(void)
 
 }
 
-static void arch_reset(char mode, const char *cmd)
-{
-	unsigned int reg;
-
-	if (mode == 's')
-		cpu_reset(0);
-
-	/* disable timer0 */
-	reg = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
-	__raw_writel(reg & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
-
-	/* enable watchdog mode */
-	__raw_writel((10 << 8) | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC);
-
-	/* re-enable timer0 */
-	__raw_writel(reg | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
-}
-
 #endif
diff --git a/arch/arm/mach-ks8695/include/mach/vmalloc.h b/arch/arm/mach-ks8695/include/mach/vmalloc.h
deleted file mode 100644
index 744ac66..0000000
--- a/arch/arm/mach-ks8695/include/mach/vmalloc.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-ks8695/include/mach/vmalloc.h
- *
- * Copyright (C) 2006 Ben Dooks
- * Copyright (C) 2006 Simtec Electronics <linux@simtec.co.uk>
- *
- * KS8695 vmalloc definition
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END	  (KS8695_IO_VA & PGDIR_MASK)
-
-#endif
diff --git a/arch/arm/mach-ks8695/irq.c b/arch/arm/mach-ks8695/irq.c
index a78092d..76802aa 100644
--- a/arch/arm/mach-ks8695/irq.c
+++ b/arch/arm/mach-ks8695/irq.c
@@ -23,7 +23,7 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-ks8695/time.c b/arch/arm/mach-ks8695/time.c
index 69c072c..37dfcd5 100644
--- a/arch/arm/mach-ks8695/time.c
+++ b/arch/arm/mach-ks8695/time.c
@@ -109,3 +109,21 @@ struct sys_timer ks8695_timer = {
 	.offset		= ks8695_gettimeoffset,
 	.resume		= ks8695_timer_setup,
 };
+
+void ks8695_restart(char mode, const char *cmd)
+{
+	unsigned int reg;
+
+	if (mode == 's')
+		soft_restart(0);
+
+	/* disable timer0 */
+	reg = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
+	__raw_writel(reg & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
+
+	/* enable watchdog mode */
+	__raw_writel((10 << 8) | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC);
+
+	/* re-enable timer0 */
+	__raw_writel(reg | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
+}
diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c
index 205b2db..369b152 100644
--- a/arch/arm/mach-lpc32xx/common.c
+++ b/arch/arm/mach-lpc32xx/common.c
@@ -164,7 +164,7 @@ int clk_is_sysclk_mainosc(void)
 /*
  * System reset via the watchdog timer
  */
-void lpc32xx_watchdog_reset(void)
+static void lpc32xx_watchdog_reset(void)
 {
 	/* Make sure WDT clocks are enabled */
 	__raw_writel(LPC32XX_CLKPWR_PWMCLK_WDOG_EN,
@@ -311,3 +311,21 @@ void __init lpc32xx_map_io(void)
 {
 	iotable_init(lpc32xx_io_desc, ARRAY_SIZE(lpc32xx_io_desc));
 }
+
+void lpc23xx_restart(char mode, const char *cmd)
+{
+	switch (mode) {
+	case 's':
+	case 'h':
+		lpc32xx_watchdog_reset();
+		break;
+
+	default:
+		/* Do nothing */
+		break;
+	}
+
+	/* Wait for watchdog to reset system */
+	while (1)
+		;
+}
diff --git a/arch/arm/mach-lpc32xx/common.h b/arch/arm/mach-lpc32xx/common.h
index 5583f52..4b4e700 100644
--- a/arch/arm/mach-lpc32xx/common.h
+++ b/arch/arm/mach-lpc32xx/common.h
@@ -39,6 +39,8 @@ extern void __init lpc32xx_init_irq(void);
 extern void __init lpc32xx_map_io(void);
 extern void __init lpc32xx_serial_init(void);
 extern void __init lpc32xx_gpio_init(void);
+extern void lpc23xx_restart(char, const char *);
+
 
 /*
  * Structure used for setting up and querying the PLLS
diff --git a/arch/arm/mach-lpc32xx/include/mach/system.h b/arch/arm/mach-lpc32xx/include/mach/system.h
index df3b0de..bf176c9 100644
--- a/arch/arm/mach-lpc32xx/include/mach/system.h
+++ b/arch/arm/mach-lpc32xx/include/mach/system.h
@@ -24,29 +24,4 @@ static void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode, const char *cmd)
-{
-	extern void lpc32xx_watchdog_reset(void);
-
-	switch (mode) {
-	case 's':
-	case 'h':
-		printk(KERN_CRIT "RESET: Rebooting system\n");
-
-		/* Disable interrupts */
-		local_irq_disable();
-
-		lpc32xx_watchdog_reset();
-		break;
-
-	default:
-		/* Do nothing */
-		break;
-	}
-
-	/* Wait for watchdog to reset system */
-	while (1)
-		;
-}
-
 #endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/vmalloc.h b/arch/arm/mach-lpc32xx/include/mach/vmalloc.h
deleted file mode 100644
index 720fa43..0000000
--- a/arch/arm/mach-lpc32xx/include/mach/vmalloc.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/include/mach/vmalloc.h
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END	0xF0000000UL
-
-#endif
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index 6d2f0d1..bfee5b4 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -18,7 +18,7 @@
 
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/dma-mapping.h>
@@ -388,4 +388,5 @@ MACHINE_START(PHY3250, "Phytec 3250 board with the LPC3250 Microcontroller")
 	.init_irq	= lpc32xx_init_irq,
 	.timer		= &lpc32xx_timer,
 	.init_machine	= phy3250_board_init,
+	.restart	= lpc23xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index 7a60bbb..3e6dfab 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -243,6 +243,7 @@ MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform")
 	.init_irq       = pxa168_init_irq,
 	.timer          = &pxa168_timer,
 	.init_machine   = common_init,
+	.restart	= pxa168_restart,
 MACHINE_END
 
 MACHINE_START(ZYLONITE2, "PXA168-based Zylonite2 Development Platform")
@@ -251,4 +252,5 @@ MACHINE_START(ZYLONITE2, "PXA168-based Zylonite2 Development Platform")
 	.init_irq       = pxa168_init_irq,
 	.timer          = &pxa168_timer,
 	.init_machine   = common_init,
+	.restart	= pxa168_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mmp/avengers_lite.c b/arch/arm/mach-mmp/avengers_lite.c
index 39f0878..8de3dc6 100644
--- a/arch/arm/mach-mmp/avengers_lite.c
+++ b/arch/arm/mach-mmp/avengers_lite.c
@@ -45,4 +45,5 @@ MACHINE_START(AVENGERS_LITE, "PXA168 Avengers lite Development Platform")
 	.init_irq       = pxa168_init_irq,
 	.timer          = &pxa168_timer,
 	.init_machine   = avengers_lite_init,
+	.restart	= pxa168_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c
index 983cfb1..e16f04b 100644
--- a/arch/arm/mach-mmp/brownstone.c
+++ b/arch/arm/mach-mmp/brownstone.c
@@ -219,4 +219,5 @@ MACHINE_START(BROWNSTONE, "Brownstone Development Platform")
 	.init_irq	= mmp2_init_irq,
 	.timer		= &mmp2_timer,
 	.init_machine	= brownstone_init,
+	.restart	= mmp_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mmp/common.c b/arch/arm/mach-mmp/common.c
index 5720674..062b5b9 100644
--- a/arch/arm/mach-mmp/common.c
+++ b/arch/arm/mach-mmp/common.c
@@ -45,3 +45,8 @@ void __init mmp_map_io(void)
 	/* this is early, initialize mmp_chip_id here */
 	mmp_chip_id = __raw_readl(MMP_CHIPID);
 }
+
+void mmp_restart(char mode, const char *cmd)
+{
+	soft_restart(0);
+}
diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h
index ec8d65d..1c9d6c1 100644
--- a/arch/arm/mach-mmp/common.h
+++ b/arch/arm/mach-mmp/common.h
@@ -6,3 +6,4 @@ extern void timer_init(int irq);
 
 extern void __init icu_init_irq(void);
 extern void __init mmp_map_io(void);
+extern void mmp_restart(char, const char *);
diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c
index c4fd806..5a6a27a 100644
--- a/arch/arm/mach-mmp/flint.c
+++ b/arch/arm/mach-mmp/flint.c
@@ -121,4 +121,5 @@ MACHINE_START(FLINT, "Flint Development Platform")
 	.init_irq       = mmp2_init_irq,
 	.timer          = &mmp2_timer,
 	.init_machine   = flint_init,
+	.restart	= mmp_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c
index 6915656..1e3abbe 100644
--- a/arch/arm/mach-mmp/gplugd.c
+++ b/arch/arm/mach-mmp/gplugd.c
@@ -182,7 +182,7 @@ static void __init gplugd_init(void)
 
 	/* on-chip devices */
 	pxa168_add_uart(3);
-	pxa168_add_ssp(0);
+	pxa168_add_ssp(1);
 	pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(gplugd_i2c_board_info));
 
 	pxa168_add_eth(&gplugd_eth_platform_data);
@@ -194,4 +194,5 @@ MACHINE_START(GPLUGD, "PXA168-based GuruPlug Display (gplugD) Platform")
 	.init_irq       = pxa168_init_irq,
 	.timer          = &pxa168_timer,
 	.init_machine   = gplugd_init,
+	.restart	= pxa168_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mmp/include/mach/gpio-pxa.h b/arch/arm/mach-mmp/include/mach/gpio-pxa.h
index d14eeaf..99b4ce1 100644
--- a/arch/arm/mach-mmp/include/mach/gpio-pxa.h
+++ b/arch/arm/mach-mmp/include/mach/gpio-pxa.h
@@ -7,7 +7,7 @@
 #define GPIO_REGS_VIRT	(APB_VIRT_BASE + 0x19000)
 
 #define BANK_OFF(n)	(((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
-#define GPIO_REG(x)	(GPIO_REGS_VIRT + (x))
+#define GPIO_REG(x)	(*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
 
 #define NR_BUILTIN_GPIO		IRQ_GPIO_NUM
 
diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h
index 7fb568d..a677aa7 100644
--- a/arch/arm/mach-mmp/include/mach/pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/pxa168.h
@@ -5,6 +5,7 @@ struct sys_timer;
 
 extern struct sys_timer pxa168_timer;
 extern void __init pxa168_init_irq(void);
+extern void pxa168_restart(char, const char *);
 extern void pxa168_clear_keypad_wakeup(void);
 
 #include <linux/i2c.h>
diff --git a/arch/arm/mach-mmp/include/mach/system.h b/arch/arm/mach-mmp/include/mach/system.h
index 1a8a25e..1d001ea 100644
--- a/arch/arm/mach-mmp/include/mach/system.h
+++ b/arch/arm/mach-mmp/include/mach/system.h
@@ -9,18 +9,8 @@
 #ifndef __ASM_MACH_SYSTEM_H
 #define __ASM_MACH_SYSTEM_H
 
-#include <mach/cputype.h>
-
 static inline void arch_idle(void)
 {
 	cpu_do_idle();
 }
-
-static inline void arch_reset(char mode, const char *cmd)
-{
-	if (cpu_is_pxa168())
-		cpu_reset(0xffff0000);
-	else
-		cpu_reset(0);
-}
 #endif /* __ASM_MACH_SYSTEM_H */
diff --git a/arch/arm/mach-mmp/include/mach/vmalloc.h b/arch/arm/mach-mmp/include/mach/vmalloc.h
deleted file mode 100644
index 1d0bac0..0000000
--- a/arch/arm/mach-mmp/include/mach/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * linux/arch/arm/mach-mmp/include/mach/vmalloc.h
- */
-
-#define VMALLOC_END	0xfe000000UL
diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c
index 8bfac66..96cf5c8 100644
--- a/arch/arm/mach-mmp/jasper.c
+++ b/arch/arm/mach-mmp/jasper.c
@@ -175,4 +175,5 @@ MACHINE_START(MARVELL_JASPER, "Jasper Development Platform")
 	.init_irq       = mmp2_init_irq,
 	.timer          = &mmp2_timer,
 	.init_machine   = jasper_init,
+	.restart	= mmp_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index 76ca15c..13f2386 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -214,3 +214,8 @@ int __init pxa168_add_usb_host(struct pxa168_usb_pdata *pdata)
 	pxa168_device_usb_host.dev.platform_data = pdata;
 	return platform_device_register(&pxa168_device_usb_host);
 }
+
+void pxa168_restart(char mode, const char *cmd)
+{
+	soft_restart(0xffff0000);
+}
diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c
index eb5be87..257a212 100644
--- a/arch/arm/mach-mmp/tavorevb.c
+++ b/arch/arm/mach-mmp/tavorevb.c
@@ -103,4 +103,5 @@ MACHINE_START(TAVOREVB, "PXA910 Evaluation Board (aka TavorEVB)")
 	.init_irq       = pxa910_init_irq,
 	.timer          = &pxa910_timer,
 	.init_machine   = tavorevb_init,
+	.restart	= mmp_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mmp/teton_bga.c b/arch/arm/mach-mmp/teton_bga.c
index bbe4727..8ac22a6 100644
--- a/arch/arm/mach-mmp/teton_bga.c
+++ b/arch/arm/mach-mmp/teton_bga.c
@@ -86,4 +86,5 @@ MACHINE_START(TETON_BGA, "PXA168-based Teton BGA Development Platform")
 	.init_irq       = pxa168_init_irq,
 	.timer          = &pxa168_timer,
 	.init_machine   = teton_bga_init,
+	.restart	= pxa168_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index 4e91ee6..71fc4ee 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -25,7 +25,6 @@
 
 #include <linux/io.h>
 #include <linux/irq.h>
-#include <linux/sched.h>
 
 #include <asm/sched_clock.h>
 #include <mach/addr-map.h>
@@ -42,8 +41,6 @@
 #define MAX_DELTA		(0xfffffffe)
 #define MIN_DELTA		(16)
 
-static DEFINE_CLOCK_DATA(cd);
-
 /*
  * FIXME: the timer needs some delay to stablize the counter capture
  */
@@ -59,16 +56,9 @@ static inline uint32_t timer_read(void)
 	return __raw_readl(TIMERS_VIRT_BASE + TMR_CVWR(1));
 }
 
-unsigned long long notrace sched_clock(void)
+static u32 notrace mmp_read_sched_clock(void)
 {
-	u32 cyc = timer_read();
-	return cyc_to_sched_clock(&cd, cyc, (u32)~0);
-}
-
-static void notrace mmp_update_sched_clock(void)
-{
-	u32 cyc = timer_read();
-	update_sched_clock(&cd, cyc, (u32)~0);
+	return timer_read();
 }
 
 static irqreturn_t timer_interrupt(int irq, void *dev_id)
@@ -201,7 +191,7 @@ void __init timer_init(int irq)
 {
 	timer_config();
 
-	init_sched_clock(&cd, mmp_update_sched_clock, 32, CLOCK_TICK_RATE);
+	setup_sched_clock(mmp_read_sched_clock, 32, CLOCK_TICK_RATE);
 
 	ckevt.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, ckevt.shift);
 	ckevt.max_delta_ns = clockevent_delta2ns(MAX_DELTA, &ckevt);
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
index 176515a..f026588 100644
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -159,4 +159,5 @@ MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform")
 	.init_irq       = pxa910_init_irq,
 	.timer          = &pxa910_timer,
 	.init_machine   = ttc_dkb_init,
+	.restart	= mmp_restart,
 MACHINE_END
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index ebde97f..e6beaff 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -67,6 +67,7 @@ config MSM_SOC_REV_A
 	bool
 config  ARCH_MSM_SCORPIONMP
 	bool
+	select HAVE_SMP
 
 config  ARCH_MSM_ARM11
 	bool
diff --git a/arch/arm/mach-msm/board-msm8960.c b/arch/arm/mach-msm/board-msm8960.c
index 6dc1cbd..ed35981 100644
--- a/arch/arm/mach-msm/board-msm8960.c
+++ b/arch/arm/mach-msm/board-msm8960.c
@@ -99,6 +99,7 @@ MACHINE_START(MSM8960_SIM, "QCT MSM8960 SIMULATOR")
 	.map_io = msm8960_map_io,
 	.init_irq = msm8960_init_irq,
 	.timer = &msm_timer,
+	.handle_irq = gic_handle_irq,
 	.init_machine = msm8960_sim_init,
 MACHINE_END
 
@@ -108,6 +109,7 @@ MACHINE_START(MSM8960_RUMI3, "QCT MSM8960 RUMI3")
 	.map_io = msm8960_map_io,
 	.init_irq = msm8960_init_irq,
 	.timer = &msm_timer,
+	.handle_irq = gic_handle_irq,
 	.init_machine = msm8960_rumi3_init,
 MACHINE_END
 
diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c
index 44bf716..0a11342 100644
--- a/arch/arm/mach-msm/board-msm8x60.c
+++ b/arch/arm/mach-msm/board-msm8x60.c
@@ -108,6 +108,7 @@ MACHINE_START(MSM8X60_RUMI3, "QCT MSM8X60 RUMI3")
 	.reserve = msm8x60_reserve,
 	.map_io = msm8x60_map_io,
 	.init_irq = msm8x60_init_irq,
+	.handle_irq = gic_handle_irq,
 	.init_machine = msm8x60_init,
 	.timer = &msm_timer,
 MACHINE_END
@@ -117,6 +118,7 @@ MACHINE_START(MSM8X60_SURF, "QCT MSM8X60 SURF")
 	.reserve = msm8x60_reserve,
 	.map_io = msm8x60_map_io,
 	.init_irq = msm8x60_init_irq,
+	.handle_irq = gic_handle_irq,
 	.init_machine = msm8x60_init,
 	.timer = &msm_timer,
 MACHINE_END
@@ -126,6 +128,7 @@ MACHINE_START(MSM8X60_SIM, "QCT MSM8X60 SIMULATOR")
 	.reserve = msm8x60_reserve,
 	.map_io = msm8x60_map_io,
 	.init_irq = msm8x60_init_irq,
+	.handle_irq = gic_handle_irq,
 	.init_machine = msm8x60_init,
 	.timer = &msm_timer,
 MACHINE_END
@@ -135,6 +138,7 @@ MACHINE_START(MSM8X60_FFA, "QCT MSM8X60 FFA")
 	.reserve = msm8x60_reserve,
 	.map_io = msm8x60_map_io,
 	.init_irq = msm8x60_init_irq,
+	.handle_irq = gic_handle_irq,
 	.init_machine = msm8x60_init,
 	.timer = &msm_timer,
 MACHINE_END
diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c
index 32b4657..97b8191 100644
--- a/arch/arm/mach-msm/board-sapphire.c
+++ b/arch/arm/mach-msm/board-sapphire.c
@@ -18,7 +18,7 @@
 #include <linux/input.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 
 #include <linux/delay.h>
 
diff --git a/arch/arm/mach-msm/devices-iommu.c b/arch/arm/mach-msm/devices-iommu.c
index 24030d0..0fb7a17 100644
--- a/arch/arm/mach-msm/devices-iommu.c
+++ b/arch/arm/mach-msm/devices-iommu.c
@@ -18,6 +18,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/bootmem.h>
+#include <linux/module.h>
 #include <mach/irqs.h>
 #include <mach/iommu.h>
 
diff --git a/arch/arm/mach-msm/include/mach/entry-macro-qgic.S b/arch/arm/mach-msm/include/mach/entry-macro-qgic.S
deleted file mode 100644
index 717076f..0000000
--- a/arch/arm/mach-msm/include/mach/entry-macro-qgic.S
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Low-level IRQ helper macros
- *
- * Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/hardware/entry-macro-gic.S>
-
-	.macro	disable_fiq
-	.endm
-
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
diff --git a/arch/arm/mach-msm/include/mach/entry-macro-vic.S b/arch/arm/mach-msm/include/mach/entry-macro-vic.S
deleted file mode 100644
index 70563ed..0000000
--- a/arch/arm/mach-msm/include/mach/entry-macro-vic.S
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <mach/msm_iomap.h>
-
-	.macro	disable_fiq
-	.endm
-
-	.macro	get_irqnr_preamble, base, tmp
-	@ enable imprecise aborts
-	cpsie	a
-	mov	\base, #MSM_VIC_BASE
-	.endm
-
-	.macro	arch_ret_to_user, tmp1, tmp2
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-	@ 0xD0 has irq# or old irq# if the irq has been handled
-	@ 0xD4 has irq# or -1 if none pending *but* if you just
-	@ read 0xD4 you never get the first irq for some reason
-	ldr	\irqnr, [\base, #0xD0]
-	ldr	\irqnr, [\base, #0xD4]
-	cmp	\irqnr, #0xffffffff
-	.endm
diff --git a/arch/arm/mach-msm/include/mach/entry-macro.S b/arch/arm/mach-msm/include/mach/entry-macro.S
index b16f082..41f7003 100644
--- a/arch/arm/mach-msm/include/mach/entry-macro.S
+++ b/arch/arm/mach-msm/include/mach/entry-macro.S
@@ -16,8 +16,27 @@
  *
  */
 
-#if defined(CONFIG_ARM_GIC)
-#include <mach/entry-macro-qgic.S>
-#else
-#include <mach/entry-macro-vic.S>
+	.macro	disable_fiq
+	.endm
+
+	.macro	arch_ret_to_user, tmp1, tmp2
+	.endm
+
+#if !defined(CONFIG_ARM_GIC)
+#include <mach/msm_iomap.h>
+
+	.macro	get_irqnr_preamble, base, tmp
+	@ enable imprecise aborts
+	cpsie	a
+	mov	\base, #MSM_VIC_BASE
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+	@ 0xD0 has irq# or old irq# if the irq has been handled
+	@ 0xD4 has irq# or -1 if none pending *but* if you just
+	@ read 0xD4 you never get the first irq for some reason
+	ldr	\irqnr, [\base, #0xD0]
+	ldr	\irqnr, [\base, #0xD4]
+	cmp	\irqnr, #0xffffffff
+	.endm
 #endif
diff --git a/arch/arm/mach-msm/include/mach/system.h b/arch/arm/mach-msm/include/mach/system.h
index d2e83f4..311db2b 100644
--- a/arch/arm/mach-msm/include/mach/system.h
+++ b/arch/arm/mach-msm/include/mach/system.h
@@ -12,16 +12,8 @@
  * GNU General Public License for more details.
  *
  */
-
-#include <mach/hardware.h>
-
 void arch_idle(void);
 
-static inline void arch_reset(char mode, const char *cmd)
-{
-	for (;;) ;  /* depends on IPC w/ other core */
-}
-
 /* low level hardware reset hook -- for example, hitting the
  * PSHOLD line on the PMIC to hard reset the system
  */
diff --git a/arch/arm/mach-msm/include/mach/vmalloc.h b/arch/arm/mach-msm/include/mach/vmalloc.h
deleted file mode 100644
index d138448..0000000
--- a/arch/arm/mach-msm/include/mach/vmalloc.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* arch/arm/mach-msm/include/mach/vmalloc.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_VMALLOC_H
-#define __ASM_ARCH_MSM_VMALLOC_H
-
-#define VMALLOC_END	  0xd0000000UL
-
-#endif
-
diff --git a/arch/arm/mach-msm/smd_debug.c b/arch/arm/mach-msm/smd_debug.c
index 8736aff..0c56a5a 100644
--- a/arch/arm/mach-msm/smd_debug.c
+++ b/arch/arm/mach-msm/smd_debug.c
@@ -215,7 +215,7 @@ static const struct file_operations debug_ops = {
 	.llseek = default_llseek,
 };
 
-static void debug_create(const char *name, mode_t mode,
+static void debug_create(const char *name, umode_t mode,
 			 struct dentry *dent,
 			 int (*fill)(char *buf, int max))
 {
diff --git a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
index 0e94268..ee74ec9 100644
--- a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
+++ b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
@@ -151,4 +151,5 @@ MACHINE_START(TERASTATION_WXL, "Buffalo Nas WXL")
 	.init_early	= mv78xx0_init_early,
 	.init_irq	= mv78xx0_init_irq,
 	.timer		= &mv78xx0_timer,
+	.restart	= mv78xx0_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index 23d3980..5b9632b 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -401,3 +401,19 @@ void __init mv78xx0_init(void)
 	feroceon_l2_init(is_l2_writethrough());
 #endif
 }
+
+void mv78xx0_restart(char mode, const char *cmd)
+{
+	/*
+	 * Enable soft reset to assert RSTOUTn.
+	 */
+	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+	/*
+	 * Assert soft reset.
+	 */
+	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+	while (1)
+		;
+}
diff --git a/arch/arm/mach-mv78xx0/common.h b/arch/arm/mach-mv78xx0/common.h
index 632e63d..07d5f8f 100644
--- a/arch/arm/mach-mv78xx0/common.h
+++ b/arch/arm/mach-mv78xx0/common.h
@@ -46,6 +46,7 @@ void mv78xx0_uart1_init(void);
 void mv78xx0_uart2_init(void);
 void mv78xx0_uart3_init(void);
 void mv78xx0_i2c_init(void);
+void mv78xx0_restart(char, const char *);
 
 extern struct sys_timer mv78xx0_timer;
 
diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
index 50b85ae..4d6d48b 100644
--- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
+++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
@@ -99,4 +99,5 @@ MACHINE_START(DB78X00_BP, "Marvell DB-78x00-BP Development Board")
 	.init_early	= mv78xx0_init_early,
 	.init_irq	= mv78xx0_init_irq,
 	.timer		= &mv78xx0_timer,
+	.restart	= mv78xx0_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mv78xx0/include/mach/system.h b/arch/arm/mach-mv78xx0/include/mach/system.h
index 66e7ce4..8c3a538 100644
--- a/arch/arm/mach-mv78xx0/include/mach/system.h
+++ b/arch/arm/mach-mv78xx0/include/mach/system.h
@@ -9,28 +9,9 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <mach/bridge-regs.h>
-
 static inline void arch_idle(void)
 {
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode, const char *cmd)
-{
-	/*
-	 * Enable soft reset to assert RSTOUTn.
-	 */
-	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
-
-	/*
-	 * Assert soft reset.
-	 */
-	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
-
-	while (1)
-		;
-}
-
-
 #endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/vmalloc.h b/arch/arm/mach-mv78xx0/include/mach/vmalloc.h
deleted file mode 100644
index ba26fe9..0000000
--- a/arch/arm/mach-mv78xx0/include/mach/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/include/mach/vmalloc.h
- */
-
-#define VMALLOC_END	0xfe000000UL
diff --git a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
index e85222e..9a88270 100644
--- a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
+++ b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
@@ -84,4 +84,5 @@ MACHINE_START(RD78X00_MASA, "Marvell RD-78x00-MASA Development Board")
 	.init_early	= mv78xx0_init_early,
 	.init_irq	= mv78xx0_init_irq,
 	.timer		= &mv78xx0_timer,
+	.restart	= mv78xx0_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
index 1fc1103..944025d 100644
--- a/arch/arm/mach-mx5/board-cpuimx51.c
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -297,4 +297,5 @@ MACHINE_START(EUKREA_CPUIMX51, "Eukrea CPUIMX51 Module")
 	.handle_irq = imx51_handle_irq,
 	.timer = &mxc_timer,
 	.init_machine = eukrea_cpuimx51_init,
+	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c
index 52a11c1..9fbe923 100644
--- a/arch/arm/mach-mx5/board-cpuimx51sd.c
+++ b/arch/arm/mach-mx5/board-cpuimx51sd.c
@@ -335,4 +335,5 @@ MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD")
 	.handle_irq = imx51_handle_irq,
 	.timer = &mxc_timer,
 	.init_machine = eukrea_cpuimx51sd_init,
+	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx50_rdp.c b/arch/arm/mach-mx5/board-mx50_rdp.c
index fc3621d..42b66e8 100644
--- a/arch/arm/mach-mx5/board-mx50_rdp.c
+++ b/arch/arm/mach-mx5/board-mx50_rdp.c
@@ -222,4 +222,5 @@ MACHINE_START(MX50_RDP, "Freescale MX50 Reference Design Platform")
 	.handle_irq = imx50_handle_irq,
 	.timer = &mx50_rdp_timer,
 	.init_machine = mx50_rdp_board_init,
+	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c
index 0578390..83eab41 100644
--- a/arch/arm/mach-mx5/board-mx51_3ds.c
+++ b/arch/arm/mach-mx5/board-mx51_3ds.c
@@ -175,4 +175,5 @@ MACHINE_START(MX51_3DS, "Freescale MX51 3-Stack Board")
 	.handle_irq = imx51_handle_irq,
 	.timer = &mx51_3ds_timer,
 	.init_machine = mx51_3ds_init,
+	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index 5c837603..e4b822e 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -362,7 +362,7 @@ static void __init mx51_babbage_init(void)
 {
 	iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
 	iomux_v3_cfg_t power_key = NEW_PAD_CTRL(MX51_PAD_EIM_A27__GPIO2_21,
-		PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP);
+		PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH);
 
 	imx51_soc_init();
 
@@ -426,4 +426,5 @@ MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board")
 	.handle_irq = imx51_handle_irq,
 	.timer = &mx51_babbage_timer,
 	.init_machine = mx51_babbage_init,
+	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c
index a9e4866..3a5ed2d 100644
--- a/arch/arm/mach-mx5/board-mx51_efikamx.c
+++ b/arch/arm/mach-mx5/board-mx51_efikamx.c
@@ -182,7 +182,7 @@ static const struct gpio_keys_platform_data mx51_efikamx_powerkey_data __initcon
 	.nbuttons = ARRAY_SIZE(mx51_efikamx_powerkey),
 };
 
-void mx51_efikamx_reset(void)
+static void mx51_efikamx_restart(char mode, const char *cmd)
 {
 	if (system_rev == 0x11)
 		gpio_direction_output(EFIKAMX_RESET1_1, 0);
@@ -292,4 +292,5 @@ MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop")
 	.handle_irq = imx51_handle_irq,
 	.timer = &mx51_efikamx_timer,
 	.init_machine = mx51_efikamx_init,
+	.restart = mx51_efikamx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c
index 38c4a3e..ea5f65b 100644
--- a/arch/arm/mach-mx5/board-mx51_efikasb.c
+++ b/arch/arm/mach-mx5/board-mx51_efikasb.c
@@ -287,4 +287,5 @@ MACHINE_START(MX51_EFIKASB, "Genesi Efika Smartbook")
 	.handle_irq = imx51_handle_irq,
 	.init_machine =  efikasb_board_init,
 	.timer = &mx51_efikasb_timer,
+	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx53_ard.c b/arch/arm/mach-mx5/board-mx53_ard.c
index 0d7f0ff..5f224f1 100644
--- a/arch/arm/mach-mx5/board-mx53_ard.c
+++ b/arch/arm/mach-mx5/board-mx53_ard.c
@@ -257,4 +257,5 @@ MACHINE_START(MX53_ARD, "Freescale MX53 ARD Board")
 	.handle_irq = imx53_handle_irq,
 	.timer = &mx53_ard_timer,
 	.init_machine = mx53_ard_board_init,
+	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c
index 6bea31a..d6ce137 100644
--- a/arch/arm/mach-mx5/board-mx53_evk.c
+++ b/arch/arm/mach-mx5/board-mx53_evk.c
@@ -106,7 +106,7 @@ static inline void mx53_evk_fec_reset(void)
 	gpio_set_value(MX53_EVK_FEC_PHY_RST, 1);
 }
 
-static struct fec_platform_data mx53_evk_fec_pdata = {
+static const struct fec_platform_data mx53_evk_fec_pdata __initconst = {
 	.phy = PHY_INTERFACE_MODE_RMII,
 };
 
@@ -175,4 +175,5 @@ MACHINE_START(MX53_EVK, "Freescale MX53 EVK Board")
 	.handle_irq = imx53_handle_irq,
 	.timer = &mx53_evk_timer,
 	.init_machine = mx53_evk_board_init,
+	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c
index 7678f77..fd8b524 100644
--- a/arch/arm/mach-mx5/board-mx53_loco.c
+++ b/arch/arm/mach-mx5/board-mx53_loco.c
@@ -242,7 +242,7 @@ static inline void mx53_loco_fec_reset(void)
 	gpio_set_value(LOCO_FEC_PHY_RST, 1);
 }
 
-static struct fec_platform_data mx53_loco_fec_data = {
+static const struct fec_platform_data mx53_loco_fec_data __initconst = {
 	.phy = PHY_INTERFACE_MODE_RMII,
 };
 
@@ -317,4 +317,5 @@ MACHINE_START(MX53_LOCO, "Freescale MX53 LOCO Board")
 	.handle_irq = imx53_handle_irq,
 	.timer = &mx53_loco_timer,
 	.init_machine = mx53_loco_board_init,
+	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c
index 59c0845..22c53c9 100644
--- a/arch/arm/mach-mx5/board-mx53_smd.c
+++ b/arch/arm/mach-mx5/board-mx53_smd.c
@@ -104,7 +104,7 @@ static inline void mx53_smd_fec_reset(void)
 	gpio_set_value(SMD_FEC_PHY_RST, 1);
 }
 
-static struct fec_platform_data mx53_smd_fec_data = {
+static const struct fec_platform_data mx53_smd_fec_data __initconst = {
 	.phy = PHY_INTERFACE_MODE_RMII,
 };
 
@@ -164,4 +164,5 @@ MACHINE_START(MX53_SMD, "Freescale MX53 SMD Board")
 	.handle_irq = imx53_handle_irq,
 	.timer = &mx53_smd_timer,
 	.init_machine = mx53_smd_board_init,
+	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c
index 5c53282..5e2e7a8 100644
--- a/arch/arm/mach-mx5/cpu.c
+++ b/arch/arm/mach-mx5/cpu.c
@@ -16,7 +16,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <mach/hardware.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 static int mx5_cpu_rev = -1;
 
@@ -67,7 +67,8 @@ static int __init mx51_neon_fixup(void)
 	if (!cpu_is_mx51())
 		return 0;
 
-	if (mx51_revision() < IMX_CHIP_REVISION_3_0 && (elf_hwcap & HWCAP_NEON)) {
+	if (mx51_revision() < IMX_CHIP_REVISION_3_0 &&
+			(elf_hwcap & HWCAP_NEON)) {
 		elf_hwcap &= ~HWCAP_NEON;
 		pr_info("Turning off NEON support, detected broken NEON implementation\n");
 	}
diff --git a/arch/arm/mach-mx5/imx51-dt.c b/arch/arm/mach-mx5/imx51-dt.c
index ccc6158..e6bad17 100644
--- a/arch/arm/mach-mx5/imx51-dt.c
+++ b/arch/arm/mach-mx5/imx51-dt.c
@@ -44,20 +44,22 @@ static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = {
 	{ /* sentinel */ }
 };
 
-static void __init imx51_tzic_add_irq_domain(struct device_node *np,
+static int __init imx51_tzic_add_irq_domain(struct device_node *np,
 				struct device_node *interrupt_parent)
 {
 	irq_domain_add_simple(np, 0);
+	return 0;
 }
 
-static void __init imx51_gpio_add_irq_domain(struct device_node *np,
+static int __init imx51_gpio_add_irq_domain(struct device_node *np,
 				struct device_node *interrupt_parent)
 {
-	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS -
-				   32 * 4; /* imx51 gets 4 gpio ports */
+	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
 
+	gpio_irq_base -= 32;
 	irq_domain_add_simple(np, gpio_irq_base);
-	gpio_irq_base += 32;
+
+	return 0;
 }
 
 static const struct of_device_id imx51_irq_match[] __initconst = {
@@ -113,4 +115,5 @@ DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)")
 	.timer		= &imx51_timer,
 	.init_machine	= imx51_dt_init,
 	.dt_compat	= imx51_dt_board_compat,
+	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mx5/imx53-dt.c b/arch/arm/mach-mx5/imx53-dt.c
index ccaa0b8..05ebb3e 100644
--- a/arch/arm/mach-mx5/imx53-dt.c
+++ b/arch/arm/mach-mx5/imx53-dt.c
@@ -48,20 +48,22 @@ static const struct of_dev_auxdata imx53_auxdata_lookup[] __initconst = {
 	{ /* sentinel */ }
 };
 
-static void __init imx53_tzic_add_irq_domain(struct device_node *np,
+static int __init imx53_tzic_add_irq_domain(struct device_node *np,
 				struct device_node *interrupt_parent)
 {
 	irq_domain_add_simple(np, 0);
+	return 0;
 }
 
-static void __init imx53_gpio_add_irq_domain(struct device_node *np,
+static int __init imx53_gpio_add_irq_domain(struct device_node *np,
 				struct device_node *interrupt_parent)
 {
-	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS -
-				   32 * 7; /* imx53 gets 7 gpio ports */
+	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
 
+	gpio_irq_base -= 32;
 	irq_domain_add_simple(np, gpio_irq_base);
-	gpio_irq_base += 32;
+
+	return 0;
 }
 
 static const struct of_device_id imx53_irq_match[] __initconst = {
@@ -123,4 +125,5 @@ DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)")
 	.timer		= &imx53_timer,
 	.init_machine	= imx53_dt_init,
 	.dt_compat	= imx53_dt_board_compat,
+	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c
index 26eacc9..df4a508f2 100644
--- a/arch/arm/mach-mx5/mm.c
+++ b/arch/arm/mach-mx5/mm.c
@@ -23,7 +23,9 @@
 
 static void imx5_idle(void)
 {
-	mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+	if (!need_resched())
+		mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+	local_irq_enable();
 }
 
 /*
@@ -89,7 +91,7 @@ void __init imx51_init_early(void)
 	mxc_set_cpu_type(MXC_CPU_MX51);
 	mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
 	mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
-	imx_idle = imx5_idle;
+	pm_idle = imx5_idle;
 }
 
 void __init imx53_init_early(void)
diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c
index 229ae34..da6e4aa 100644
--- a/arch/arm/mach-mxs/clock-mx28.c
+++ b/arch/arm/mach-mxs/clock-mx28.c
@@ -404,7 +404,7 @@ static int name##_set_rate(struct clk *clk, unsigned long rate)		\
 	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
 	reg &= ~BM_CLKCTRL_##dr##_DIV;					\
 	reg |= div << BP_CLKCTRL_##dr##_DIV;				\
-	if (reg | (1 << clk->enable_shift)) {				\
+	if (reg & (1 << clk->enable_shift)) {				\
 		pr_err("%s: clock is gated\n", __func__);		\
 		return -EINVAL;						\
 	}								\
diff --git a/arch/arm/mach-mxs/include/mach/common.h b/arch/arm/mach-mxs/include/mach/common.h
index 635bb5d..1388485 100644
--- a/arch/arm/mach-mxs/include/mach/common.h
+++ b/arch/arm/mach-mxs/include/mach/common.h
@@ -16,6 +16,7 @@ struct clk;
 extern const u32 *mxs_get_ocotp(void);
 extern int mxs_reset_block(void __iomem *);
 extern void mxs_timer_init(struct clk *, int);
+extern void mxs_restart(char, const char *);
 
 extern int mx23_register_gpios(void);
 extern int mx23_clocks_init(void);
diff --git a/arch/arm/mach-mxs/include/mach/mx28.h b/arch/arm/mach-mxs/include/mach/mx28.h
index 75d8611..30c7990 100644
--- a/arch/arm/mach-mxs/include/mach/mx28.h
+++ b/arch/arm/mach-mxs/include/mach/mx28.h
@@ -104,8 +104,8 @@
 #define MX28_INT_CAN1			9
 #define MX28_INT_LRADC_TOUCH		10
 #define MX28_INT_HSADC			13
-#define MX28_INT_IRADC_THRESH0		14
-#define MX28_INT_IRADC_THRESH1		15
+#define MX28_INT_LRADC_THRESH0		14
+#define MX28_INT_LRADC_THRESH1		15
 #define MX28_INT_LRADC_CH0		16
 #define MX28_INT_LRADC_CH1		17
 #define MX28_INT_LRADC_CH2		18
diff --git a/arch/arm/mach-mxs/include/mach/mxs.h b/arch/arm/mach-mxs/include/mach/mxs.h
index 0d2d2b4..bde5f66 100644
--- a/arch/arm/mach-mxs/include/mach/mxs.h
+++ b/arch/arm/mach-mxs/include/mach/mxs.h
@@ -30,6 +30,7 @@
  */
 #define cpu_is_mx23()		(					\
 		machine_is_mx23evk() ||					\
+		machine_is_stmp378x() ||				\
 		0)
 #define cpu_is_mx28()		(					\
 		machine_is_mx28evk() ||					\
diff --git a/arch/arm/mach-mxs/include/mach/system.h b/arch/arm/mach-mxs/include/mach/system.h
index 0e42823..e7ad1bb 100644
--- a/arch/arm/mach-mxs/include/mach/system.h
+++ b/arch/arm/mach-mxs/include/mach/system.h
@@ -22,6 +22,4 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-void arch_reset(char mode, const char *cmd);
-
 #endif /* __MACH_MXS_SYSTEM_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/vmalloc.h b/arch/arm/mach-mxs/include/mach/vmalloc.h
deleted file mode 100644
index 103b016..0000000
--- a/arch/arm/mach-mxs/include/mach/vmalloc.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- *  Copyright (C) 2000 Russell King.
- *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_MXS_VMALLOC_H__
-#define __MACH_MXS_VMALLOC_H__
-
-/* vmalloc ending address */
-#define VMALLOC_END       0xf4000000UL
-
-#endif /* __MACH_MXS_VMALLOC_H__ */
diff --git a/arch/arm/mach-mxs/mach-m28evk.c b/arch/arm/mach-mxs/mach-m28evk.c
index 3b1681e..2f27582 100644
--- a/arch/arm/mach-mxs/mach-m28evk.c
+++ b/arch/arm/mach-mxs/mach-m28evk.c
@@ -361,6 +361,7 @@ static struct sys_timer m28evk_timer = {
 MACHINE_START(M28EVK, "DENX M28 EVK")
 	.map_io		= mx28_map_io,
 	.init_irq	= mx28_init_irq,
-	.init_machine	= m28evk_init,
 	.timer		= &m28evk_timer,
+	.init_machine	= m28evk_init,
+	.restart	= mxs_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-mx23evk.c b/arch/arm/mach-mxs/mach-mx23evk.c
index c325fbe..5ea1c57 100644
--- a/arch/arm/mach-mxs/mach-mx23evk.c
+++ b/arch/arm/mach-mxs/mach-mx23evk.c
@@ -184,4 +184,5 @@ MACHINE_START(MX23EVK, "Freescale MX23 EVK")
 	.init_irq	= mx23_init_irq,
 	.timer		= &mx23evk_timer,
 	.init_machine	= mx23evk_init,
+	.restart	= mxs_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
index 064ec5a..d0cc37f 100644
--- a/arch/arm/mach-mxs/mach-mx28evk.c
+++ b/arch/arm/mach-mxs/mach-mx28evk.c
@@ -501,4 +501,5 @@ MACHINE_START(MX28EVK, "Freescale MX28 EVK")
 	.init_irq	= mx28_init_irq,
 	.timer		= &mx28evk_timer,
 	.init_machine	= mx28evk_init,
+	.restart	= mxs_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-stmp378x_devb.c b/arch/arm/mach-mxs/mach-stmp378x_devb.c
index 177e531..a626c07 100644
--- a/arch/arm/mach-mxs/mach-stmp378x_devb.c
+++ b/arch/arm/mach-mxs/mach-stmp378x_devb.c
@@ -115,6 +115,7 @@ static struct sys_timer stmp378x_dvb_timer = {
 MACHINE_START(STMP378X, "STMP378X")
 	.map_io		= mx23_map_io,
 	.init_irq	= mx23_init_irq,
-	.init_machine	= stmp378x_dvb_init,
 	.timer		= &stmp378x_dvb_timer,
+	.init_machine	= stmp378x_dvb_init,
+	.restart	= mxs_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-tx28.c b/arch/arm/mach-mxs/mach-tx28.c
index 9a1f0e7..2c0862e 100644
--- a/arch/arm/mach-mxs/mach-tx28.c
+++ b/arch/arm/mach-mxs/mach-tx28.c
@@ -178,4 +178,5 @@ MACHINE_START(TX28, "Ka-Ro electronics TX28 module")
 	.init_irq = mx28_init_irq,
 	.timer = &tx28_timer,
 	.init_machine = tx28_stk5v3_init,
+	.restart	= mxs_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mxs/module-tx28.c b/arch/arm/mach-mxs/module-tx28.c
index 0fcff47..9a7b08b 100644
--- a/arch/arm/mach-mxs/module-tx28.c
+++ b/arch/arm/mach-mxs/module-tx28.c
@@ -66,11 +66,11 @@ static const iomux_cfg_t tx28_fec1_pads[] __initconst = {
 	MX28_PAD_ENET0_CRS__ENET1_RX_EN,
 };
 
-static struct fec_platform_data tx28_fec0_data = {
+static const struct fec_platform_data tx28_fec0_data __initconst = {
 	.phy = PHY_INTERFACE_MODE_RMII,
 };
 
-static struct fec_platform_data tx28_fec1_data = {
+static const struct fec_platform_data tx28_fec1_data __initconst = {
 	.phy = PHY_INTERFACE_MODE_RMII,
 };
 
diff --git a/arch/arm/mach-mxs/system.c b/arch/arm/mach-mxs/system.c
index 20ec3bd..b936633 100644
--- a/arch/arm/mach-mxs/system.c
+++ b/arch/arm/mach-mxs/system.c
@@ -42,7 +42,7 @@ static void __iomem *mxs_clkctrl_reset_addr;
 /*
  * Reset the system. It is called by machine_restart().
  */
-void arch_reset(char mode, const char *cmd)
+void mxs_restart(char mode, const char *cmd)
 {
 	/* reset the chip */
 	__mxs_setl(MXS_CLKCTRL_RESET_CHIP, mxs_clkctrl_reset_addr);
@@ -53,7 +53,7 @@ void arch_reset(char mode, const char *cmd)
 	mdelay(50);
 
 	/* We'll take a jump through zero as a poor second */
-	cpu_reset(0);
+	soft_restart(0);
 }
 
 static int __init mxs_arch_reset_init(void)
diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c
index 00023b5..59e6797 100644
--- a/arch/arm/mach-netx/generic.c
+++ b/arch/arm/mach-netx/generic.c
@@ -187,3 +187,8 @@ static int __init netx_init(void)
 
 subsys_initcall(netx_init);
 
+void netx_restart(char mode, const char *cmd)
+{
+	writel(NETX_SYSTEM_RES_CR_FIRMW_RES_EN | NETX_SYSTEM_RES_CR_FIRMW_RES,
+	       NETX_SYSTEM_RES_CR);
+}
diff --git a/arch/arm/mach-netx/generic.h b/arch/arm/mach-netx/generic.h
index ede2d35..9b91511 100644
--- a/arch/arm/mach-netx/generic.h
+++ b/arch/arm/mach-netx/generic.h
@@ -19,6 +19,7 @@
 
 extern void __init netx_map_io(void);
 extern void __init netx_init_irq(void);
+extern void netx_restart(char, const char *);
 
 struct sys_timer;
 extern struct sys_timer netx_timer;
diff --git a/arch/arm/mach-netx/include/mach/entry-macro.S b/arch/arm/mach-netx/include/mach/entry-macro.S
index 844f1f9..6e9f1cb 100644
--- a/arch/arm/mach-netx/include/mach/entry-macro.S
+++ b/arch/arm/mach-netx/include/mach/entry-macro.S
@@ -18,22 +18,9 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#include <mach/hardware.h>
 
 		.macro  disable_fiq
 		.endm
 
-		.macro  get_irqnr_preamble, base, tmp
-		ldr	\base, =io_p2v(0x001ff000)
-		.endm
-
 		.macro  arch_ret_to_user, tmp1, tmp2
 		.endm
-
-		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\irqstat, [\base, #0]
-		clz	\irqnr, \irqstat
-		rsb     \irqnr, \irqnr, #31
-		cmp	\irqstat, #0
-		.endm
-
diff --git a/arch/arm/mach-netx/include/mach/system.h b/arch/arm/mach-netx/include/mach/system.h
index dc7b4bc..b38fa36 100644
--- a/arch/arm/mach-netx/include/mach/system.h
+++ b/arch/arm/mach-netx/include/mach/system.h
@@ -19,20 +19,10 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include "netx-regs.h"
-
 static inline void arch_idle(void)
 {
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode, const char *cmd)
-{
-	writel(NETX_SYSTEM_RES_CR_FIRMW_RES_EN | NETX_SYSTEM_RES_CR_FIRMW_RES,
-	       NETX_SYSTEM_RES_CR);
-}
-
 #endif
 
diff --git a/arch/arm/mach-netx/include/mach/vmalloc.h b/arch/arm/mach-netx/include/mach/vmalloc.h
deleted file mode 100644
index 871f1ef..0000000
--- a/arch/arm/mach-netx/include/mach/vmalloc.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *  arch/arm/mach-netx/include/mach/vmalloc.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define VMALLOC_END       0xd0000000UL
diff --git a/arch/arm/mach-netx/nxdb500.c b/arch/arm/mach-netx/nxdb500.c
index 90903dd..180ea89 100644
--- a/arch/arm/mach-netx/nxdb500.c
+++ b/arch/arm/mach-netx/nxdb500.c
@@ -28,6 +28,7 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/hardware/vic.h>
 #include <mach/netx-regs.h>
 #include <mach/eth.h>
 
@@ -203,6 +204,8 @@ MACHINE_START(NXDB500, "Hilscher nxdb500")
 	.atag_offset	= 0x100,
 	.map_io		= netx_map_io,
 	.init_irq	= netx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &netx_timer,
 	.init_machine	= nxdb500_init,
+	.restart	= netx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-netx/nxdkn.c b/arch/arm/mach-netx/nxdkn.c
index c63384a..58009e2 100644
--- a/arch/arm/mach-netx/nxdkn.c
+++ b/arch/arm/mach-netx/nxdkn.c
@@ -28,6 +28,7 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/hardware/vic.h>
 #include <mach/netx-regs.h>
 #include <mach/eth.h>
 
@@ -96,6 +97,8 @@ MACHINE_START(NXDKN, "Hilscher nxdkn")
 	.atag_offset	= 0x100,
 	.map_io		= netx_map_io,
 	.init_irq	= netx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &netx_timer,
 	.init_machine	= nxdkn_init,
+	.restart	= netx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-netx/nxeb500hmi.c b/arch/arm/mach-netx/nxeb500hmi.c
index 8f548ec..122e998 100644
--- a/arch/arm/mach-netx/nxeb500hmi.c
+++ b/arch/arm/mach-netx/nxeb500hmi.c
@@ -28,6 +28,7 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/hardware/vic.h>
 #include <mach/netx-regs.h>
 #include <mach/eth.h>
 
@@ -180,6 +181,8 @@ MACHINE_START(NXEB500HMI, "Hilscher nxeb500hmi")
 	.atag_offset	= 0x100,
 	.map_io		= netx_map_io,
 	.init_irq	= netx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &netx_timer,
 	.init_machine	= nxeb500hmi_init,
+	.restart	= netx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 0cbb74c..7c878bf 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -21,6 +21,7 @@
 #include <linux/mtd/onenand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/io.h>
+#include <asm/hardware/vic.h>
 #include <asm/sizes.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -34,6 +35,8 @@
 #include <mach/nand.h>
 #include <mach/fsmc.h>
 
+#include "cpu-8815.h"
+
 /* Initial value for SRC control register: all timers use MXTAL/8 source */
 #define SRC_CR_INIT_MASK	0x00007fff
 #define SRC_CR_INIT_VAL		0x2aaa8000
@@ -280,6 +283,8 @@ MACHINE_START(NOMADIK, "NHK8815")
 	.atag_offset	= 0x100,
 	.map_io		= cpu8815_map_io,
 	.init_irq	= cpu8815_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &nomadik_timer,
 	.init_machine	= nhk8815_platform_init,
+	.restart	= cpu8815_restart,
 MACHINE_END
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index dc67717..65df7b4 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -21,6 +21,7 @@
 #include <linux/device.h>
 #include <linux/amba/bus.h>
 #include <linux/platform_device.h>
+#include <linux/io.h>
 
 #include <plat/gpio-nomadik.h>
 #include <mach/hardware.h>
@@ -32,6 +33,7 @@
 #include <asm/hardware/cache-l2x0.h>
 
 #include "clock.h"
+#include "cpu-8815.h"
 
 #define __MEM_4K_RESOURCE(x) \
 	.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
@@ -164,3 +166,13 @@ void __init cpu8815_init_irq(void)
 #endif
 	 return;
 }
+
+void cpu8815_restart(char mode, const char *cmd)
+{
+	void __iomem *src_rstsr = io_p2v(NOMADIK_SRC_BASE + 0x18);
+
+	/* FIXME: use egpio when implemented */
+
+	/* Write anything to Reset status register */
+	writel(1, src_rstsr);
+}
diff --git a/arch/arm/mach-nomadik/cpu-8815.h b/arch/arm/mach-nomadik/cpu-8815.h
new file mode 100644
index 0000000..71c21e8
--- /dev/null
+++ b/arch/arm/mach-nomadik/cpu-8815.h
@@ -0,0 +1,4 @@
+extern void cpu8815_map_io(void);
+extern void cpu8815_platform_init(void);
+extern void cpu8815_init_irq(void);
+extern void cpu8815_restart(char, const char *);
diff --git a/arch/arm/mach-nomadik/include/mach/entry-macro.S b/arch/arm/mach-nomadik/include/mach/entry-macro.S
index 49f1aa3..98ea1c1 100644
--- a/arch/arm/mach-nomadik/include/mach/entry-macro.S
+++ b/arch/arm/mach-nomadik/include/mach/entry-macro.S
@@ -6,38 +6,8 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-
 	.macro	disable_fiq
 	.endm
 
-	.macro	get_irqnr_preamble, base, tmp
-	ldr	\base, =IO_ADDRESS(NOMADIK_IC_BASE)
-	.endm
-
 	.macro	arch_ret_to_user, tmp1, tmp2
 	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-	/* This stanza gets the irq mask from one of two status registers */
-	mov	\irqnr, #0
-	ldr	\irqstat, [\base, #VIC_REG_IRQSR0]	@ get masked status
-	cmp	\irqstat, #0
-	bne	1001f
-	add	\irqnr, \irqnr, #32
-	ldr	\irqstat, [\base, #VIC_REG_IRQSR1]	@ get masked status
-
-1001:	tst	\irqstat, #15
-	bne	1002f
-	add	\irqnr, \irqnr, #4
-	movs	\irqstat, \irqstat, lsr #4
-	bne	1001b
-1002:	tst	\irqstat, #1
-	bne	1003f
-	add	\irqnr, \irqnr, #1
-	movs	\irqstat, \irqstat, lsr #1
-	bne	1002b
-1003:	/* EQ will be set if no irqs pending */
-	.endm
diff --git a/arch/arm/mach-nomadik/include/mach/setup.h b/arch/arm/mach-nomadik/include/mach/setup.h
index b7897ed..bcaeaf4 100644
--- a/arch/arm/mach-nomadik/include/mach/setup.h
+++ b/arch/arm/mach-nomadik/include/mach/setup.h
@@ -12,9 +12,6 @@
 
 #ifdef CONFIG_NOMADIK_8815
 
-extern void cpu8815_map_io(void);
-extern void cpu8815_platform_init(void);
-extern void cpu8815_init_irq(void);
 extern void nmdk_timer_init(void);
 
 #endif /* NOMADIK_8815 */
diff --git a/arch/arm/mach-nomadik/include/mach/system.h b/arch/arm/mach-nomadik/include/mach/system.h
index 7119f68..25e198b 100644
--- a/arch/arm/mach-nomadik/include/mach/system.h
+++ b/arch/arm/mach-nomadik/include/mach/system.h
@@ -20,9 +20,6 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <linux/io.h>
-#include <mach/hardware.h>
-
 static inline void arch_idle(void)
 {
 	/*
@@ -32,14 +29,4 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode, const char *cmd)
-{
-	void __iomem *src_rstsr = io_p2v(NOMADIK_SRC_BASE + 0x18);
-
-	/* FIXME: use egpio when implemented */
-
-	/* Write anything to Reset status register */
-	writel(1, src_rstsr);
-}
-
 #endif
diff --git a/arch/arm/mach-nomadik/include/mach/vmalloc.h b/arch/arm/mach-nomadik/include/mach/vmalloc.h
deleted file mode 100644
index f83d574..0000000
--- a/arch/arm/mach-nomadik/include/mach/vmalloc.h
+++ /dev/null
@@ -1,2 +0,0 @@
-
-#define VMALLOC_END       0xe8000000UL
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index e0a0281..73f287d 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -171,14 +171,6 @@ config MACH_OMAP_GENERIC
 comment "OMAP CPU Speed"
 	depends on ARCH_OMAP1
 
-config OMAP_CLOCKS_SET_BY_BOOTLOADER
-	bool "OMAP clocks set by bootloader"
-	depends on ARCH_OMAP1
-	help
-	  Enable this option to prevent the kernel from overriding the clock
-	  frequencies programmed by bootloader for MPU, DSP, MMUs, TC,
-	  internal LCD controller and MPU peripherals.
-
 config OMAP_ARM_216MHZ
 	bool "OMAP ARM 216 MHz CPU (1710 only)"
         depends on ARCH_OMAP1 && ARCH_OMAP16XX
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 51bae31..88909cc 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -35,7 +35,7 @@
 #include <plat/mux.h>
 #include <plat/usb.h>
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <mach/camera.h>
 
 #include <mach/ams-delta-fiq.h>
@@ -302,8 +302,6 @@ static void __init ams_delta_init(void)
 	omap_cfg_reg(J19_1610_CAM_D6);
 	omap_cfg_reg(J18_1610_CAM_D7);
 
-	iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
-
 	omap_board_config = ams_delta_config;
 	omap_board_config_size = ARRAY_SIZE(ams_delta_config);
 	omap_serial_init();
@@ -373,15 +371,22 @@ static int __init ams_delta_modem_init(void)
 }
 arch_initcall(ams_delta_modem_init);
 
+static void __init ams_delta_map_io(void)
+{
+	omap15xx_map_io();
+	iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
+}
+
 MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
 	/* Maintainer: Jonathan McDowell <noodles@earth.li> */
 	.atag_offset	= 0x100,
-	.map_io		= omap15xx_map_io,
+	.map_io		= ams_delta_map_io,
 	.init_early	= omap1_init_early,
 	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= ams_delta_init,
 	.timer		= &omap1_timer,
+	.restart	= omap1_restart,
 MACHINE_END
 
 EXPORT_SYMBOL(ams_delta_latch1_write);
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 2317827..0b9464b 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -32,7 +32,7 @@
 #include <plat/flash.h>
 #include <plat/fpga.h>
 #include <plat/keypad.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/board.h>
 
 /* fsample is pretty close to p2-sample */
@@ -390,4 +390,5 @@ MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_fsample_init,
 	.timer		= &omap1_timer,
+	.restart	= omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index dc5b75d..9a5fe58 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -25,7 +25,7 @@
 #include <plat/mux.h>
 #include <plat/usb.h>
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 
 /* assume no Mini-AB port */
 
@@ -89,4 +89,5 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_generic_init,
 	.timer		= &omap1_timer,
+	.restart	= omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index b334b14..00ad6b2 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -43,7 +43,7 @@
 #include <plat/irda.h>
 #include <plat/usb.h>
 #include <plat/keypad.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/flash.h>
 
 #include "board-h2.h"
@@ -456,4 +456,5 @@ MACHINE_START(OMAP_H2, "TI-H2")
 	.init_irq	= omap1_init_irq,
 	.init_machine	= h2_init,
 	.timer		= &omap1_timer,
+	.restart	= omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 74ebe72..4a7f251 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -45,7 +45,7 @@
 #include <plat/usb.h>
 #include <plat/keypad.h>
 #include <plat/dma.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/flash.h>
 
 #include "board-h3.h"
@@ -444,4 +444,5 @@ MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
 	.init_irq	= omap1_init_irq,
 	.init_machine	= h3_init,
 	.timer		= &omap1_timer,
+	.restart	= omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 3e91baa..731cc3d 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -41,7 +41,7 @@
 #include <asm/mach/arch.h>
 
 #include <plat/omap7xx.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/board.h>
 #include <plat/keypad.h>
 #include <plat/usb.h>
@@ -610,4 +610,5 @@ MACHINE_START(HERALD, "HTC Herald")
 	.init_irq       = omap1_init_irq,
 	.init_machine   = htcherald_init,
 	.timer          = &omap1_timer,
+	.restart	= omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 273153d..309369e 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -37,7 +37,7 @@
 #include <plat/tc.h>
 #include <plat/usb.h>
 #include <plat/keypad.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/mmc.h>
 
 /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
@@ -460,4 +460,5 @@ MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
 	.init_irq	= omap1_init_irq,
 	.init_machine	= innovator_init,
 	.timer		= &omap1_timer,
+	.restart	= omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 6798b84..f9efc03 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -30,7 +30,7 @@
 #include <plat/usb.h>
 #include <plat/board.h>
 #include <plat/keypad.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/hwa742.h>
 #include <plat/lcd_mipid.h>
 #include <plat/mmc.h>
@@ -259,4 +259,5 @@ MACHINE_START(NOKIA770, "Nokia 770")
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_nokia770_init,
 	.timer		= &omap1_timer,
+	.restart	= omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index c385927..675de06 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -51,7 +51,7 @@
 #include <plat/usb.h>
 #include <plat/mux.h>
 #include <plat/tc.h>
-#include <plat/common.h>
+#include "common.h"
 
 /* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
 #define OMAP_OSK_ETHR_START		0x04800300
@@ -578,4 +578,5 @@ MACHINE_START(OMAP_OSK, "TI-OSK")
 	.init_irq	= omap1_init_irq,
 	.init_machine	= osk_init,
 	.timer		= &omap1_timer,
+	.restart	= omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index f9c44cb..81fa27f 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -41,7 +41,7 @@
 #include <plat/board.h>
 #include <plat/irda.h>
 #include <plat/keypad.h>
-#include <plat/common.h>
+#include "common.h"
 
 #define PALMTE_USBDETECT_GPIO	0
 #define PALMTE_USB_OR_DC_GPIO	1
@@ -270,4 +270,5 @@ MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_palmte_init,
 	.timer		= &omap1_timer,
+	.restart	= omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 11a9853..81cb821 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -39,7 +39,7 @@
 #include <plat/board.h>
 #include <plat/irda.h>
 #include <plat/keypad.h>
-#include <plat/common.h>
+#include "common.h"
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
@@ -317,4 +317,5 @@ MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_palmtt_init,
 	.timer		= &omap1_timer,
+	.restart	= omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 4206157..e881945 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -41,7 +41,7 @@
 #include <plat/board.h>
 #include <plat/irda.h>
 #include <plat/keypad.h>
-#include <plat/common.h>
+#include "common.h"
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
@@ -334,4 +334,5 @@ MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_palmz71_init,
 	.timer		= &omap1_timer,
+	.restart	= omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 203ae07..c000bed 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -32,7 +32,7 @@
 #include <plat/fpga.h>
 #include <plat/flash.h>
 #include <plat/keypad.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/board.h>
 
 static const unsigned int p2_keymap[] = {
@@ -352,4 +352,5 @@ MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_perseus2_init,
 	.timer		= &omap1_timer,
+	.restart	= omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 092a4c0..7bcd82a 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -40,7 +40,7 @@
 #include <plat/usb.h>
 #include <plat/tc.h>
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/keypad.h>
 #include <plat/board-sx1.h>
 
@@ -416,4 +416,5 @@ MACHINE_START(SX1, "OMAP310 based Siemens SX1")
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_sx1_init,
 	.timer		= &omap1_timer,
+	.restart	= omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 61ed6cd..f83a502d 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -28,13 +28,12 @@
 #include <linux/export.h>
 
 #include <mach/hardware.h>
-#include <mach/system.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
 #include <plat/board-voiceblue.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/flash.h>
 #include <plat/mux.h>
 #include <plat/tc.h>
@@ -221,7 +220,7 @@ void voiceblue_wdt_ping(void)
 	gpio_set_value(0, wdt_gpio_state);
 }
 
-static void voiceblue_reset(char mode, const char *cmd)
+static void voiceblue_restart(char mode, const char *cmd)
 {
 	/*
 	 * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
@@ -285,8 +284,6 @@ static void __init voiceblue_init(void)
 	 * (it is connected through invertor) */
 	omap_writeb(0x00, OMAP_LPG1_LCR);
 	omap_writeb(0x00, OMAP_LPG1_PMR);	/* Disable clock */
-
-	arch_reset = voiceblue_reset;
 }
 
 MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
@@ -298,4 +295,5 @@ MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
 	.init_irq	= omap1_init_irq,
 	.init_machine	= voiceblue_init,
 	.timer		= &omap1_timer,
+	.restart	= voiceblue_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
index eaf09ef..16b1423 100644
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -17,7 +17,8 @@
 
 #include <plat/clock.h>
 
-extern int __init omap1_clk_init(void);
+int omap1_clk_init(void);
+void omap1_clk_late_init(void);
 extern int omap1_clk_enable(struct clk *clk);
 extern void omap1_clk_disable(struct clk *clk);
 extern long omap1_clk_round_rate(struct clk *clk, unsigned long rate);
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index 92400b9..9ff90a7 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -16,6 +16,8 @@
 
 #include <linux/kernel.h>
 #include <linux/clk.h>
+#include <linux/cpufreq.h>
+#include <linux/delay.h>
 #include <linux/io.h>
 
 #include <asm/mach-types.h>  /* for machine_is_* */
@@ -767,6 +769,15 @@ static struct clk_functions omap1_clk_functions = {
 	.clk_disable_unused	= omap1_clk_disable_unused,
 };
 
+static void __init omap1_show_rates(void)
+{
+	pr_notice("Clocking rate (xtal/DPLL1/MPU): "
+			"%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
+		ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
+		ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
+		arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
+}
+
 int __init omap1_clk_init(void)
 {
 	struct omap_clk *c;
@@ -835,9 +846,12 @@ int __init omap1_clk_init(void)
 	/* We want to be in syncronous scalable mode */
 	omap_writew(0x1000, ARM_SYSST);
 
-#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER
-	/* Use values set by bootloader. Determine PLL rate and recalculate
-	 * dependent clocks as if kernel had changed PLL or divisors.
+
+	/*
+	 * Initially use the values set by bootloader. Determine PLL rate and
+	 * recalculate dependent clocks as if kernel had changed PLL or
+	 * divisors. See also omap1_clk_late_init() that can reprogram dpll1
+	 * after the SRAM is initialized.
 	 */
 	{
 		unsigned pll_ctl_val = omap_readw(DPLL_CTL);
@@ -862,25 +876,10 @@ int __init omap1_clk_init(void)
 			}
 		}
 	}
-#else
-	/* Find the highest supported frequency and enable it */
-	if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
-		printk(KERN_ERR "System frequencies not set. Check your config.\n");
-		/* Guess sane values (60MHz) */
-		omap_writew(0x2290, DPLL_CTL);
-		omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL);
-		ck_dpll1.rate = 60000000;
-	}
-#endif
 	propagate_rate(&ck_dpll1);
 	/* Cache rates for clocks connected to ck_ref (not dpll1) */
 	propagate_rate(&ck_ref);
-	printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): "
-		"%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
-	       ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
-	       ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
-	       arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
-
+	omap1_show_rates();
 	if (machine_is_omap_perseus2() || machine_is_omap_fsample()) {
 		/* Select slicer output as OMAP input clock */
 		omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1,
@@ -925,3 +924,27 @@ int __init omap1_clk_init(void)
 
 	return 0;
 }
+
+#define OMAP1_DPLL1_SANE_VALUE	60000000
+
+void __init omap1_clk_late_init(void)
+{
+	unsigned long rate = ck_dpll1.rate;
+
+	if (rate >= OMAP1_DPLL1_SANE_VALUE)
+		return;
+
+	/* System booting at unusable rate, force reprogramming of DPLL1 */
+	ck_dpll1_p->rate = 0;
+
+	/* Find the highest supported frequency and enable it */
+	if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
+		pr_err("System frequencies not set, using default. Check your config.\n");
+		omap_writew(0x2290, DPLL_CTL);
+		omap_writew(cpu_is_omap7xx() ? 0x2005 : 0x0005, ARM_CKCTL);
+		ck_dpll1.rate = OMAP1_DPLL1_SANE_VALUE;
+	}
+	propagate_rate(&ck_dpll1);
+	omap1_show_rates();
+	loops_per_jiffy = cpufreq_scale(loops_per_jiffy, rate, ck_dpll1.rate);
+}
diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h
new file mode 100644
index 0000000..a9a5146
--- /dev/null
+++ b/arch/arm/mach-omap1/common.h
@@ -0,0 +1,62 @@
+/*
+ *
+ * Header for code common to all OMAP1 machines.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP1_COMMON_H
+#define __ARCH_ARM_MACH_OMAP1_COMMON_H
+
+#include <plat/common.h>
+
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+void omap7xx_map_io(void);
+#else
+static inline void omap7xx_map_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP15XX
+void omap15xx_map_io(void);
+#else
+static inline void omap15xx_map_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP16XX
+void omap16xx_map_io(void);
+#else
+static inline void omap16xx_map_io(void)
+{
+}
+#endif
+
+void omap1_init_early(void);
+void omap1_init_irq(void);
+void omap1_restart(char, const char *);
+
+extern struct sys_timer omap1_timer;
+extern bool omap_32k_timer_init(void);
+
+#endif /* __ARCH_ARM_MACH_OMAP1_COMMON_H */
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 48ef988..1d76a63 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -22,7 +22,7 @@
 #include <mach/hardware.h>
 #include <asm/mach/map.h>
 
-#include <plat/common.h>
+#include "common.h"
 #include <plat/tc.h>
 #include <plat/board.h>
 #include <plat/mux.h>
@@ -30,6 +30,8 @@
 #include <plat/omap7xx.h>
 #include <plat/mcbsp.h>
 
+#include "clock.h"
+
 /*-------------------------------------------------------------------------*/
 
 #if defined(CONFIG_RTC_DRV_OMAP) || defined(CONFIG_RTC_DRV_OMAP_MODULE)
@@ -293,6 +295,7 @@ static int __init omap1_init_devices(void)
 		return -ENODEV;
 
 	omap_sram_init();
+	omap1_clk_late_init();
 
 	/* please keep these calls, and their implementations above,
 	 * in alphabetical order so they're easier to sort through.
diff --git a/arch/arm/mach-omap1/include/mach/vmalloc.h b/arch/arm/mach-omap1/include/mach/vmalloc.h
deleted file mode 100644
index 22ec4a4..0000000
--- a/arch/arm/mach-omap1/include/mach/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  arch/arm/mach-omap1/include/mach/vmalloc.h
- *
- *  Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define VMALLOC_END	0xd8000000UL
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 7969cfd..8e55b6fb 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -121,7 +121,6 @@ void __init omap16xx_map_io(void)
 void omap1_init_early(void)
 {
 	omap_check_revision();
-	omap_ioremap_init();
 
 	/* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort
 	 * on a Posted Write in the TIPB Bridge".
diff --git a/arch/arm/mach-omap1/reset.c b/arch/arm/mach-omap1/reset.c
index ad951ee..91d199b 100644
--- a/arch/arm/mach-omap1/reset.c
+++ b/arch/arm/mach-omap1/reset.c
@@ -5,10 +5,9 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <mach/system.h>
 #include <plat/prcm.h>
 
-void omap1_arch_reset(char mode, const char *cmd)
+void omap1_restart(char mode, const char *cmd)
 {
 	/*
 	 * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
@@ -21,5 +20,3 @@ void omap1_arch_reset(char mode, const char *cmd)
 
 	omap_writew(1, ARM_RSTCT1);
 }
-
-void (*arch_reset)(char, const char *) = omap1_arch_reset;
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index a183777..b8faffa 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -37,7 +37,6 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
-#include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/clk.h>
 #include <linux/err.h>
@@ -54,7 +53,7 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
-#include <plat/common.h>
+#include "common.h"
 
 #ifdef CONFIG_OMAP_MPU_TIMER
 
@@ -190,30 +189,9 @@ static __init void omap_init_mpu_timer(unsigned long rate)
  * ---------------------------------------------------------------------------
  */
 
-static DEFINE_CLOCK_DATA(cd);
-
-static inline unsigned long long notrace _omap_mpu_sched_clock(void)
-{
-	u32 cyc = ~omap_mpu_timer_read(1);
-	return cyc_to_sched_clock(&cd, cyc, (u32)~0);
-}
-
-#ifndef CONFIG_OMAP_32K_TIMER
-unsigned long long notrace sched_clock(void)
-{
-	return _omap_mpu_sched_clock();
-}
-#else
-static unsigned long long notrace omap_mpu_sched_clock(void)
-{
-	return _omap_mpu_sched_clock();
-}
-#endif
-
-static void notrace mpu_update_sched_clock(void)
+static u32 notrace omap_mpu_read_sched_clock(void)
 {
-	u32 cyc = ~omap_mpu_timer_read(1);
-	update_sched_clock(&cd, cyc, (u32)~0);
+	return ~omap_mpu_timer_read(1);
 }
 
 static void __init omap_init_clocksource(unsigned long rate)
@@ -223,7 +201,7 @@ static void __init omap_init_clocksource(unsigned long rate)
 			"%s: can't register clocksource!\n";
 
 	omap_mpu_timer_start(1, ~0, 1);
-	init_sched_clock(&cd, mpu_update_sched_clock, 32, rate);
+	setup_sched_clock(omap_mpu_read_sched_clock, 32, rate);
 
 	if (clocksource_mmio_init(&timer->read_tim, "mpu_timer2", rate,
 			300, 32, clocksource_mmio_readl_down))
@@ -254,30 +232,6 @@ static inline void omap_mpu_timer_init(void)
 }
 #endif	/* CONFIG_OMAP_MPU_TIMER */
 
-#if defined(CONFIG_OMAP_MPU_TIMER) && defined(CONFIG_OMAP_32K_TIMER)
-static unsigned long long (*preferred_sched_clock)(void);
-
-unsigned long long notrace sched_clock(void)
-{
-	if (!preferred_sched_clock)
-		return 0;
-
-	return preferred_sched_clock();
-}
-
-static inline void preferred_sched_clock_init(bool use_32k_sched_clock)
-{
-	if (use_32k_sched_clock)
-		preferred_sched_clock = omap_32k_sched_clock;
-	else
-		preferred_sched_clock = omap_mpu_sched_clock;
-}
-#else
-static inline void preferred_sched_clock_init(bool use_32k_sched_clcok)
-{
-}
-#endif
-
 static inline int omap_32k_timer_usable(void)
 {
 	int res = false;
@@ -299,12 +253,8 @@ static inline int omap_32k_timer_usable(void)
  */
 static void __init omap1_timer_init(void)
 {
-	if (omap_32k_timer_usable()) {
-		preferred_sched_clock_init(1);
-	} else {
+	if (!omap_32k_timer_usable())
 		omap_mpu_timer_init();
-		preferred_sched_clock_init(0);
-	}
 }
 
 struct sys_timer omap1_timer = {
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index 96604a5..9a54ef4 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -52,7 +52,7 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/dmtimer.h>
 
 /*
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 5034147..4f01533 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -25,6 +25,7 @@ config ARCH_OMAP2
 	depends on ARCH_OMAP2PLUS
 	default y
 	select CPU_V6
+	select MULTI_IRQ_HANDLER
 
 config ARCH_OMAP3
 	bool "TI OMAP3"
@@ -36,13 +37,16 @@ config ARCH_OMAP3
 	select ARCH_HAS_OPP
 	select PM_OPP if PM
 	select ARM_CPU_SUSPEND if PM
+	select MULTI_IRQ_HANDLER
 
 config ARCH_OMAP4
 	bool "TI OMAP4"
 	default y
 	depends on ARCH_OMAP2PLUS
+	select CACHE_L2X0
 	select CPU_V7
 	select ARM_GIC
+	select HAVE_SMP
 	select LOCAL_TIMERS if SMP
 	select PL310_ERRATA_588369
 	select PL310_ERRATA_727915
@@ -334,6 +338,7 @@ config MACH_OMAP4_PANDA
 config OMAP3_EMU
 	bool "OMAP3 debugging peripherals"
 	depends on ARCH_OMAP3
+	select ARM_AMBA
 	select OC_ETM
 	help
 	  Say Y here to enable debugging hardware of omap3
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 69ab1c0..b009f17 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -4,7 +4,7 @@
 
 # Common support
 obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
-	 common.o gpio.o dma.o wd_timer.o
+	 common.o gpio.o dma.o wd_timer.o display.o
 
 omap-2-3-common				= irq.o sdrc.o
 hwmod-common				= omap_hwmod.o \
@@ -264,7 +264,4 @@ smsc911x-$(CONFIG_SMSC911X)		:= gpmc-smsc911x.o
 obj-y					+= $(smsc911x-m) $(smsc911x-y)
 obj-$(CONFIG_ARCH_OMAP4)		+= hwspinlock.o
 
-disp-$(CONFIG_OMAP2_DSS)		:= display.o
-obj-y					+= $(disp-m) $(disp-y)
-
 obj-y					+= common-board-devices.o twl-common.o
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index d704f0a..7370983 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -34,7 +34,7 @@
 #include <asm/mach/map.h>
 
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/gpmc.h>
 #include <plat/usb.h>
 #include <plat/gpmc-smc91x.h>
@@ -301,6 +301,8 @@ MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
 	.map_io		= omap243x_map_io,
 	.init_early	= omap2430_init_early,
 	.init_irq	= omap2_init_irq,
+	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= omap_2430sdp_init,
 	.timer		= &omap2_timer,
+	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 77142c1..9996334 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -33,7 +33,7 @@
 #include <plat/mcspi.h>
 #include <plat/board.h>
 #include <plat/usb.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/dma.h>
 #include <plat/gpmc.h>
 #include <video/omapdss.h>
@@ -728,6 +728,8 @@ MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
 	.map_io		= omap3_map_io,
 	.init_early	= omap3430_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap_3430sdp_init,
 	.timer		= &omap3_timer,
+	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index f552305..6ef350d 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -16,7 +16,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <plat/common.h>
+#include "common.h"
 #include <plat/board.h>
 #include <plat/gpmc-smc91x.h>
 #include <plat/usb.h>
@@ -215,6 +215,8 @@ MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
 	.map_io		= omap3_map_io,
 	.init_early	= omap3630_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap_sdp_init,
 	.timer		= &omap3_timer,
+	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 5156468..bad5d5a 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -27,13 +27,13 @@
 #include <linux/leds_pwm.h>
 
 #include <mach/hardware.h>
-#include <mach/omap4-common.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/usb.h>
 #include <plat/mmc.h>
 #include <plat/omap4-keypad.h>
@@ -984,6 +984,8 @@ MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
 	.map_io		= omap4_map_io,
 	.init_early	= omap4430_init_early,
 	.init_irq	= gic_init_irq,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= omap_4430sdp_init,
 	.timer		= &omap4_timer,
+	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index 7834536..c3851e8 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -27,7 +27,7 @@
 #include <asm/mach/map.h>
 
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/usb.h>
 
 #include "mux.h"
@@ -98,6 +98,8 @@ MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD")
 	.map_io		= omap3_map_io,
 	.init_early	= am35xx_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= am3517_crane_init,
 	.timer		= &omap3_timer,
+	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index d314f03..f5a3a3f 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -32,7 +32,7 @@
 #include <asm/mach/map.h>
 
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/usb.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
@@ -491,6 +491,8 @@ MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
 	.map_io		= omap3_map_io,
 	.init_early	= am35xx_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= am3517_evm_init,
 	.timer		= &omap3_timer,
+	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index de8134b..ac77382 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -37,7 +37,7 @@
 #include <plat/led.h>
 #include <plat/usb.h>
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/gpmc.h>
 
 #include <video/omapdss.h>
@@ -354,6 +354,8 @@ MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
 	.map_io		= omap242x_map_io,
 	.init_early	= omap2420_init_early,
 	.init_irq	= omap2_init_irq,
+	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= omap_apollon_init,
 	.timer		= &omap2_timer,
+	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index bd1bcac..1545102 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -37,7 +37,7 @@
 #include <asm/mach/map.h>
 
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/nand.h>
 #include <plat/gpmc.h>
 #include <plat/usb.h>
@@ -634,8 +634,10 @@ MACHINE_START(CM_T35, "Compulab CM-T35")
 	.map_io		= omap3_map_io,
 	.init_early	= omap35xx_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= cm_t35_init,
 	.timer		= &omap3_timer,
+	.restart	= omap_prcm_restart,
 MACHINE_END
 
 MACHINE_START(CM_T3730, "Compulab CM-T3730")
@@ -644,6 +646,8 @@ MACHINE_START(CM_T3730, "Compulab CM-T3730")
 	.map_io         = omap3_map_io,
 	.init_early     = omap3630_init_early,
 	.init_irq       = omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine   = cm_t3730_init,
 	.timer          = &omap3_timer,
+	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index 3f4dc66..f36d694 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -39,7 +39,7 @@
 #include <asm/mach/map.h>
 
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/usb.h>
 #include <plat/nand.h>
 #include <plat/gpmc.h>
@@ -299,6 +299,8 @@ MACHINE_START(CM_T3517, "Compulab CM-T3517")
 	.map_io		= omap3_map_io,
 	.init_early	= am35xx_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= cm_t3517_init,
 	.timer		= &omap3_timer,
+	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 90154e4..e873063 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -41,7 +41,7 @@
 #include <asm/mach/flash.h>
 
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/gpmc.h>
 #include <plat/nand.h>
 #include <plat/usb.h>
@@ -660,6 +660,8 @@ MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
 	.map_io		= omap3_map_io,
 	.init_early	= omap35xx_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= devkit8000_init,
 	.timer		= &omap3_secure_timer,
+	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index fb55fa3d..f8c5b2c 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -20,8 +20,7 @@
 #include <asm/mach/arch.h>
 
 #include <plat/board.h>
-#include <plat/common.h>
-#include <mach/omap4-common.h>
+#include "common.h"
 #include "common-board-devices.h"
 
 /*
@@ -107,6 +106,7 @@ DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)")
 	.init_machine	= omap_generic_init,
 	.timer		= &omap2_timer,
 	.dt_compat	= omap242x_boards_compat,
+	.restart	= omap_prcm_restart,
 MACHINE_END
 #endif
 
@@ -122,9 +122,11 @@ DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)")
 	.map_io		= omap243x_map_io,
 	.init_early	= omap2430_init_early,
 	.init_irq	= omap2_init_irq,
+	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= omap_generic_init,
 	.timer		= &omap2_timer,
 	.dt_compat	= omap243x_boards_compat,
+	.restart	= omap_prcm_restart,
 MACHINE_END
 #endif
 
@@ -143,6 +145,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
 	.init_machine	= omap3_init,
 	.timer		= &omap3_timer,
 	.dt_compat	= omap3_boards_compat,
+	.restart	= omap_prcm_restart,
 MACHINE_END
 #endif
 
@@ -161,5 +164,6 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)")
 	.init_machine	= omap4_init,
 	.timer		= &omap4_timer,
 	.dt_compat	= omap4_boards_compat,
+	.restart	= omap_prcm_restart,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 8b351d9..54af800 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -34,7 +34,7 @@
 
 #include <plat/usb.h>
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/menelaus.h>
 #include <plat/dma.h>
 #include <plat/gpmc.h>
@@ -396,6 +396,8 @@ MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
 	.map_io		= omap242x_map_io,
 	.init_early	= omap2420_init_early,
 	.init_irq	= omap2_init_irq,
+	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= omap_h4_init,
 	.timer		= &omap2_timer,
+	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index d0a3f78..a59ace0 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -28,7 +28,7 @@
 #include <asm/mach/arch.h>
 
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/gpmc.h>
 #include <plat/usb.h>
 #include <video/omapdss.h>
@@ -672,8 +672,10 @@ MACHINE_START(IGEP0020, "IGEP v2 board")
 	.map_io		= omap3_map_io,
 	.init_early	= omap35xx_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= igep_init,
 	.timer		= &omap3_timer,
+	.restart	= omap_prcm_restart,
 MACHINE_END
 
 MACHINE_START(IGEP0030, "IGEP OMAP3 module")
@@ -682,6 +684,8 @@ MACHINE_START(IGEP0030, "IGEP OMAP3 module")
 	.map_io		= omap3_map_io,
 	.init_early	= omap35xx_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= igep_init,
 	.timer		= &omap3_timer,
+	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index e179da0..2d2a61f 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -36,7 +36,7 @@
 
 #include <plat/mcspi.h>
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/gpmc.h>
 #include <mach/board-zoom.h>
 
@@ -434,6 +434,8 @@ MACHINE_START(OMAP_LDP, "OMAP LDP board")
 	.map_io		= omap3_map_io,
 	.init_early	= omap3430_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap_ldp_init,
 	.timer		= &omap3_timer,
+	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index e9d5f4a..cef2cf1 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -26,7 +26,7 @@
 #include <asm/mach-types.h>
 
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/menelaus.h>
 #include <mach/irqs.h>
 #include <plat/mcspi.h>
@@ -689,8 +689,10 @@ MACHINE_START(NOKIA_N800, "Nokia N800")
 	.map_io		= omap242x_map_io,
 	.init_early	= omap2420_init_early,
 	.init_irq	= omap2_init_irq,
+	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= n8x0_init_machine,
 	.timer		= &omap2_timer,
+	.restart	= omap_prcm_restart,
 MACHINE_END
 
 MACHINE_START(NOKIA_N810, "Nokia N810")
@@ -699,8 +701,10 @@ MACHINE_START(NOKIA_N810, "Nokia N810")
 	.map_io		= omap242x_map_io,
 	.init_early	= omap2420_init_early,
 	.init_irq	= omap2_init_irq,
+	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= n8x0_init_machine,
 	.timer		= &omap2_timer,
+	.restart	= omap_prcm_restart,
 MACHINE_END
 
 MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
@@ -709,6 +713,8 @@ MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
 	.map_io		= omap242x_map_io,
 	.init_early	= omap2420_init_early,
 	.init_irq	= omap2_init_irq,
+	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= n8x0_init_machine,
 	.timer		= &omap2_timer,
+	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 4a71cb7..7ffcd28 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -40,7 +40,7 @@
 #include <asm/mach/flash.h>
 
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <video/omapdss.h>
 #include <video/omap-panel-dvi.h>
 #include <plat/gpmc.h>
@@ -559,6 +559,8 @@ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
 	.map_io		= omap3_map_io,
 	.init_early	= omap3_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap3_beagle_init,
 	.timer		= &omap3_secure_timer,
+	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index ec00b2e..003fe34 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -43,7 +43,7 @@
 
 #include <plat/board.h>
 #include <plat/usb.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/mcspi.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-dvi.h>
@@ -681,6 +681,8 @@ MACHINE_START(OMAP3EVM, "OMAP3 EVM")
 	.map_io		= omap3_map_io,
 	.init_early	= omap35xx_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap3_evm_init,
 	.timer		= &omap3_timer,
+	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index 7c0f193..4198dd0 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -40,7 +40,7 @@
 
 #include <plat/mux.h>
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/gpmc-smsc911x.h>
 #include <plat/gpmc.h>
 #include <plat/sdrc.h>
@@ -208,8 +208,10 @@ MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board")
 	.map_io		= omap3_map_io,
 	.init_early	= omap35xx_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap3logic_init,
 	.timer		= &omap3_timer,
+	.restart	= omap_prcm_restart,
 MACHINE_END
 
 MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
@@ -217,6 +219,8 @@ MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
 	.map_io		= omap3_map_io,
 	.init_early	= omap35xx_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap3logic_init,
 	.timer		= &omap3_timer,
+	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index f7811f4..1644b73 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -41,7 +41,7 @@
 #include <asm/mach/map.h>
 
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <mach/hardware.h>
 #include <plat/mcspi.h>
 #include <plat/usb.h>
@@ -606,6 +606,8 @@ MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
 	.map_io		= omap3_map_io,
 	.init_early	= omap35xx_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap3pandora_init,
 	.timer		= &omap3_timer,
+	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index ddb7d66..cb089a4 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -35,7 +35,7 @@
 #include <asm/mach/flash.h>
 
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/gpmc.h>
 #include <plat/nand.h>
 #include <plat/usb.h>
@@ -454,6 +454,8 @@ MACHINE_START(SBC3530, "OMAP3 STALKER")
 	.map_io			= omap3_map_io,
 	.init_early		= omap35xx_init_early,
 	.init_irq		= omap3_init_irq,
+	.handle_irq		= omap3_intc_handle_irq,
 	.init_machine		= omap3_stalker_init,
 	.timer			= &omap3_secure_timer,
+	.restart		= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index a2d0d19..a0b851a 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -44,7 +44,7 @@
 #include <asm/mach/flash.h>
 
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/gpmc.h>
 #include <plat/nand.h>
 #include <plat/usb.h>
@@ -381,6 +381,8 @@ MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
 	.map_io		= omap3_map_io,
 	.init_early	= omap3430_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap3_touchbook_init,
 	.timer		= &omap3_secure_timer,
+	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index a8c2c42..8b06c6a 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -30,14 +30,14 @@
 #include <linux/wl12xx.h>
 
 #include <mach/hardware.h>
-#include <mach/omap4-common.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <video/omapdss.h>
 
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/usb.h>
 #include <plat/mmc.h>
 #include <video/omap-panel-dvi.h>
@@ -577,6 +577,8 @@ MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
 	.map_io		= omap4_map_io,
 	.init_early	= omap4430_init_early,
 	.init_irq	= gic_init_irq,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= omap4_panda_init,
 	.timer		= &omap4_timer,
+	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 4cf7aea..52c0cef 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -43,7 +43,7 @@
 #include <asm/mach/map.h>
 
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
 #include <video/omap-panel-dvi.h>
@@ -562,6 +562,8 @@ MACHINE_START(OVERO, "Gumstix Overo")
 	.map_io		= omap3_map_io,
 	.init_early	= omap35xx_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= overo_init,
 	.timer		= &omap3_timer,
+	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index 616fb39..8678b38 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -25,7 +25,7 @@
 #include <plat/mmc.h>
 #include <plat/usb.h>
 #include <plat/gpmc.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/onenand.h>
 
 #include "mux.h"
@@ -149,6 +149,8 @@ MACHINE_START(NOKIA_RM680, "Nokia RM-680 board")
 	.map_io		= omap3_map_io,
 	.init_early	= omap3630_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= rm680_init,
 	.timer		= &omap3_timer,
+	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index ba1aa07..108fee6 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -27,7 +27,7 @@
 
 #include <plat/mcspi.h>
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/dma.h>
 #include <plat/gpmc.h>
 #include <plat/onenand.h>
@@ -193,7 +193,7 @@ static struct platform_device rx51_charger_device = {
 static void __init rx51_charger_init(void)
 {
 	WARN_ON(gpio_request_one(RX51_USB_TRANSCEIVER_RST_GPIO,
-		GPIOF_OUT_INIT_LOW, "isp1704_reset"));
+		GPIOF_OUT_INIT_HIGH, "isp1704_reset"));
 
 	platform_device_register(&rx51_charger_device);
 }
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 4af7c4b..27f01f0 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -25,7 +25,7 @@
 
 #include <plat/mcspi.h>
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/dma.h>
 #include <plat/gpmc.h>
 #include <plat/usb.h>
@@ -127,6 +127,8 @@ MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
 	.map_io		= omap3_map_io,
 	.init_early	= omap3430_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= rx51_init,
 	.timer		= &omap3_timer,
+	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c
index e6ee884..74713e3 100644
--- a/arch/arm/mach-omap2/board-ti8168evm.c
+++ b/arch/arm/mach-omap2/board-ti8168evm.c
@@ -22,7 +22,7 @@
 
 #include <plat/irqs.h>
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 
 static struct omap_board_config_kernel ti8168_evm_config[] __initdata = {
 };
@@ -48,4 +48,5 @@ MACHINE_START(TI8168EVM, "ti8168evm")
 	.init_irq	= ti816x_init_irq,
 	.timer		= &omap3_timer,
 	.init_machine	= ti8168_evm_init,
+	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index 6d0aa4f..8d7ce11 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -24,7 +24,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/common.h>
+#include "common.h"
 #include <plat/usb.h>
 
 #include <mach/board-zoom.h>
diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
index be6684d..5c20bcc 100644
--- a/arch/arm/mach-omap2/board-zoom.c
+++ b/arch/arm/mach-omap2/board-zoom.c
@@ -21,7 +21,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <plat/common.h>
+#include "common.h"
 #include <plat/board.h>
 #include <plat/usb.h>
 
@@ -135,8 +135,10 @@ MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
 	.map_io		= omap3_map_io,
 	.init_early	= omap3430_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap_zoom_init,
 	.timer		= &omap3_timer,
+	.restart	= omap_prcm_restart,
 MACHINE_END
 
 MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
@@ -145,6 +147,8 @@ MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
 	.map_io		= omap3_map_io,
 	.init_early	= omap3630_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap_zoom_init,
 	.timer		= &omap3_timer,
+	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.c b/arch/arm/mach-omap2/cm2xxx_3xxx.c
index 38830d8..04d39cd 100644
--- a/arch/arm/mach-omap2/cm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/cm2xxx_3xxx.c
@@ -18,7 +18,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include <plat/common.h>
+#include "common.h"
 
 #include "cm.h"
 #include "cm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/cm44xx.c b/arch/arm/mach-omap2/cm44xx.c
index e96f53e..6a83630 100644
--- a/arch/arm/mach-omap2/cm44xx.c
+++ b/arch/arm/mach-omap2/cm44xx.c
@@ -18,7 +18,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include <plat/common.h>
+#include "common.h"
 
 #include "cm.h"
 #include "cm1_44xx.h"
diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c
index eb2a472..6204dea 100644
--- a/arch/arm/mach-omap2/cminst44xx.c
+++ b/arch/arm/mach-omap2/cminst44xx.c
@@ -20,7 +20,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include <plat/common.h>
+#include "common.h"
 
 #include "cm.h"
 #include "cm1_44xx.h"
diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c
index 110e5b9..684b8a7 100644
--- a/arch/arm/mach-omap2/common.c
+++ b/arch/arm/mach-omap2/common.c
@@ -17,7 +17,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <plat/common.h>
+#include "common.h"
 #include <plat/board.h>
 #include <plat/mux.h>
 
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
new file mode 100644
index 0000000..cda888a
--- /dev/null
+++ b/arch/arm/mach-omap2/common.h
@@ -0,0 +1,186 @@
+/*
+ * Header for code common to all OMAP2+ machines.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H
+#define __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H
+
+#include <linux/delay.h>
+#include <plat/common.h>
+
+#ifdef CONFIG_SOC_OMAP2420
+extern void omap242x_map_common_io(void);
+#else
+static inline void omap242x_map_common_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_SOC_OMAP2430
+extern void omap243x_map_common_io(void);
+#else
+static inline void omap243x_map_common_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+extern void omap34xx_map_common_io(void);
+#else
+static inline void omap34xx_map_common_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_SOC_OMAPTI816X
+extern void omapti816x_map_common_io(void);
+#else
+static inline void omapti816x_map_common_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP4
+extern void omap44xx_map_common_io(void);
+#else
+static inline void omap44xx_map_common_io(void)
+{
+}
+#endif
+
+extern void omap2_init_common_infrastructure(void);
+
+extern struct sys_timer omap2_timer;
+extern struct sys_timer omap3_timer;
+extern struct sys_timer omap3_secure_timer;
+extern struct sys_timer omap4_timer;
+
+void omap2420_init_early(void);
+void omap2430_init_early(void);
+void omap3430_init_early(void);
+void omap35xx_init_early(void);
+void omap3630_init_early(void);
+void omap3_init_early(void);	/* Do not use this one */
+void am35xx_init_early(void);
+void ti816x_init_early(void);
+void omap4430_init_early(void);
+void omap_prcm_restart(char, const char *);
+
+/*
+ * IO bases for various OMAP processors
+ * Except the tap base, rest all the io bases
+ * listed are physical addresses.
+ */
+struct omap_globals {
+	u32		class;		/* OMAP class to detect */
+	void __iomem	*tap;		/* Control module ID code */
+	void __iomem	*sdrc;           /* SDRAM Controller */
+	void __iomem	*sms;            /* SDRAM Memory Scheduler */
+	void __iomem	*ctrl;           /* System Control Module */
+	void __iomem	*ctrl_pad;	/* PAD Control Module */
+	void __iomem	*prm;            /* Power and Reset Management */
+	void __iomem	*cm;             /* Clock Management */
+	void __iomem	*cm2;
+};
+
+void omap2_set_globals_242x(void);
+void omap2_set_globals_243x(void);
+void omap2_set_globals_3xxx(void);
+void omap2_set_globals_443x(void);
+void omap2_set_globals_ti816x(void);
+
+/* These get called from omap2_set_globals_xxxx(), do not call these */
+void omap2_set_globals_tap(struct omap_globals *);
+void omap2_set_globals_sdrc(struct omap_globals *);
+void omap2_set_globals_control(struct omap_globals *);
+void omap2_set_globals_prcm(struct omap_globals *);
+
+void omap242x_map_io(void);
+void omap243x_map_io(void);
+void omap3_map_io(void);
+void omap4_map_io(void);
+
+/**
+ * omap_test_timeout - busy-loop, testing a condition
+ * @cond: condition to test until it evaluates to true
+ * @timeout: maximum number of microseconds in the timeout
+ * @index: loop index (integer)
+ *
+ * Loop waiting for @cond to become true or until at least @timeout
+ * microseconds have passed.  To use, define some integer @index in the
+ * calling code.  After running, if @index == @timeout, then the loop has
+ * timed out.
+ */
+#define omap_test_timeout(cond, timeout, index)			\
+({								\
+	for (index = 0; index < timeout; index++) {		\
+		if (cond)					\
+			break;					\
+		udelay(1);					\
+	}							\
+})
+
+extern struct device *omap2_get_mpuss_device(void);
+extern struct device *omap2_get_iva_device(void);
+extern struct device *omap2_get_l3_device(void);
+extern struct device *omap4_get_dsp_device(void);
+
+void omap2_init_irq(void);
+void omap3_init_irq(void);
+void ti816x_init_irq(void);
+extern int omap_irq_pending(void);
+void omap_intc_save_context(void);
+void omap_intc_restore_context(void);
+void omap3_intc_suspend(void);
+void omap3_intc_prepare_idle(void);
+void omap3_intc_resume_idle(void);
+void omap2_intc_handle_irq(struct pt_regs *regs);
+void omap3_intc_handle_irq(struct pt_regs *regs);
+
+/*
+ * wfi used in low power code. Directly opcode is used instead
+ * of instruction to avoid mulit-omap build break
+ */
+#ifdef CONFIG_THUMB2_KERNEL
+#define do_wfi() __asm__ __volatile__ ("wfi" : : : "memory")
+#else
+#define do_wfi()			\
+		__asm__ __volatile__ (".word	0xe320f003" : : : "memory")
+#endif
+
+#ifdef CONFIG_CACHE_L2X0
+extern void __iomem *l2cache_base;
+#endif
+
+extern void __init gic_init_irq(void);
+extern void omap_smc1(u32 fn, u32 arg);
+
+#ifdef CONFIG_SMP
+/* Needed for secondary core boot */
+extern void omap_secondary_startup(void);
+extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask);
+extern void omap_auxcoreboot_addr(u32 cpu_addr);
+extern u32 omap_read_auxcoreboot0(void);
+#endif
+
+#endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index e34d27f..114c037 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -15,7 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 
-#include <plat/common.h>
+#include "common.h"
 #include <plat/sdrc.h>
 
 #include "cm-regbits-34xx.h"
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index 1fe35c2..e20332f 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -24,6 +24,7 @@
 
 #include <linux/sched.h>
 #include <linux/cpuidle.h>
+#include <linux/export.h>
 
 #include <plat/prcm.h>
 #include <plat/irqs.h>
@@ -33,6 +34,7 @@
 
 #include "pm.h"
 #include "control.h"
+#include "common.h"
 
 #ifdef CONFIG_CPU_IDLE
 
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index adb2756..bc6cf86 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -22,13 +22,41 @@
 #include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/err.h>
+#include <linux/delay.h>
 
 #include <video/omapdss.h>
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
 #include <plat/omap-pm.h>
+#include "common.h"
 
 #include "control.h"
+#include "display.h"
+
+#define DISPC_CONTROL		0x0040
+#define DISPC_CONTROL2		0x0238
+#define DISPC_IRQSTATUS		0x0018
+
+#define DSS_SYSCONFIG		0x10
+#define DSS_SYSSTATUS		0x14
+#define DSS_CONTROL		0x40
+#define DSS_SDI_CONTROL		0x44
+#define DSS_PLL_CONTROL		0x48
+
+#define LCD_EN_MASK		(0x1 << 0)
+#define DIGIT_EN_MASK		(0x1 << 1)
+
+#define FRAMEDONE_IRQ_SHIFT	0
+#define EVSYNC_EVEN_IRQ_SHIFT	2
+#define EVSYNC_ODD_IRQ_SHIFT	3
+#define FRAMEDONE2_IRQ_SHIFT	22
+#define FRAMEDONETV_IRQ_SHIFT	24
+
+/*
+ * FRAMEDONE_IRQ_TIMEOUT: how long (in milliseconds) to wait during DISPC
+ *     reset before deciding that something has gone wrong
+ */
+#define FRAMEDONE_IRQ_TIMEOUT		100
 
 static struct platform_device omap_display_device = {
 	.name          = "omapdss",
@@ -172,3 +200,135 @@ int __init omap_display_init(struct omap_dss_board_info *board_data)
 
 	return r;
 }
+
+static void dispc_disable_outputs(void)
+{
+	u32 v, irq_mask = 0;
+	bool lcd_en, digit_en, lcd2_en = false;
+	int i;
+	struct omap_dss_dispc_dev_attr *da;
+	struct omap_hwmod *oh;
+
+	oh = omap_hwmod_lookup("dss_dispc");
+	if (!oh) {
+		WARN(1, "display: could not disable outputs during reset - could not find dss_dispc hwmod\n");
+		return;
+	}
+
+	if (!oh->dev_attr) {
+		pr_err("display: could not disable outputs during reset due to missing dev_attr\n");
+		return;
+	}
+
+	da = (struct omap_dss_dispc_dev_attr *)oh->dev_attr;
+
+	/* store value of LCDENABLE and DIGITENABLE bits */
+	v = omap_hwmod_read(oh, DISPC_CONTROL);
+	lcd_en = v & LCD_EN_MASK;
+	digit_en = v & DIGIT_EN_MASK;
+
+	/* store value of LCDENABLE for LCD2 */
+	if (da->manager_count > 2) {
+		v = omap_hwmod_read(oh, DISPC_CONTROL2);
+		lcd2_en = v & LCD_EN_MASK;
+	}
+
+	if (!(lcd_en | digit_en | lcd2_en))
+		return; /* no managers currently enabled */
+
+	/*
+	 * If any manager was enabled, we need to disable it before
+	 * DSS clocks are disabled or DISPC module is reset
+	 */
+	if (lcd_en)
+		irq_mask |= 1 << FRAMEDONE_IRQ_SHIFT;
+
+	if (digit_en) {
+		if (da->has_framedonetv_irq) {
+			irq_mask |= 1 << FRAMEDONETV_IRQ_SHIFT;
+		} else {
+			irq_mask |= 1 << EVSYNC_EVEN_IRQ_SHIFT |
+				1 << EVSYNC_ODD_IRQ_SHIFT;
+		}
+	}
+
+	if (lcd2_en)
+		irq_mask |= 1 << FRAMEDONE2_IRQ_SHIFT;
+
+	/*
+	 * clear any previous FRAMEDONE, FRAMEDONETV,
+	 * EVSYNC_EVEN/ODD or FRAMEDONE2 interrupts
+	 */
+	omap_hwmod_write(irq_mask, oh, DISPC_IRQSTATUS);
+
+	/* disable LCD and TV managers */
+	v = omap_hwmod_read(oh, DISPC_CONTROL);
+	v &= ~(LCD_EN_MASK | DIGIT_EN_MASK);
+	omap_hwmod_write(v, oh, DISPC_CONTROL);
+
+	/* disable LCD2 manager */
+	if (da->manager_count > 2) {
+		v = omap_hwmod_read(oh, DISPC_CONTROL2);
+		v &= ~LCD_EN_MASK;
+		omap_hwmod_write(v, oh, DISPC_CONTROL2);
+	}
+
+	i = 0;
+	while ((omap_hwmod_read(oh, DISPC_IRQSTATUS) & irq_mask) !=
+	       irq_mask) {
+		i++;
+		if (i > FRAMEDONE_IRQ_TIMEOUT) {
+			pr_err("didn't get FRAMEDONE1/2 or TV interrupt\n");
+			break;
+		}
+		mdelay(1);
+	}
+}
+
+#define MAX_MODULE_SOFTRESET_WAIT	10000
+int omap_dss_reset(struct omap_hwmod *oh)
+{
+	struct omap_hwmod_opt_clk *oc;
+	int c = 0;
+	int i, r;
+
+	if (!(oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS)) {
+		pr_err("dss_core: hwmod data doesn't contain reset data\n");
+		return -EINVAL;
+	}
+
+	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
+		if (oc->_clk)
+			clk_enable(oc->_clk);
+
+	dispc_disable_outputs();
+
+	/* clear SDI registers */
+	if (cpu_is_omap3430()) {
+		omap_hwmod_write(0x0, oh, DSS_SDI_CONTROL);
+		omap_hwmod_write(0x0, oh, DSS_PLL_CONTROL);
+	}
+
+	/*
+	 * clear DSS_CONTROL register to switch DSS clock sources to
+	 * PRCM clock, if any
+	 */
+	omap_hwmod_write(0x0, oh, DSS_CONTROL);
+
+	omap_test_timeout((omap_hwmod_read(oh, oh->class->sysc->syss_offs)
+				& SYSS_RESETDONE_MASK),
+			MAX_MODULE_SOFTRESET_WAIT, c);
+
+	if (c == MAX_MODULE_SOFTRESET_WAIT)
+		pr_warning("dss_core: waiting for reset to finish failed\n");
+	else
+		pr_debug("dss_core: softreset done\n");
+
+	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
+		if (oc->_clk)
+			clk_disable(oc->_clk);
+
+	r = (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : 0;
+
+	return r;
+}
diff --git a/arch/arm/mach-omap2/display.h b/arch/arm/mach-omap2/display.h
new file mode 100644
index 0000000..b871b017
--- /dev/null
+++ b/arch/arm/mach-omap2/display.h
@@ -0,0 +1,29 @@
+/*
+ * display.h - OMAP2+ integration-specific DSS header
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_DISPLAY_H
+#define __ARCH_ARM_MACH_OMAP2_DISPLAY_H
+
+#include <linux/kernel.h>
+
+struct omap_dss_dispc_dev_attr {
+	u8	manager_count;
+	bool	has_framedonetv_irq;
+};
+
+#endif
diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c
index ace9994..a12e224 100644
--- a/arch/arm/mach-omap2/i2c.c
+++ b/arch/arm/mach-omap2/i2c.c
@@ -21,7 +21,7 @@
 
 #include <plat/cpu.h>
 #include <plat/i2c.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/omap_hwmod.h>
 
 #include "mux.h"
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 7f47092..27ad722 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -21,7 +21,7 @@
 
 #include <asm/cputype.h>
 
-#include <plat/common.h>
+#include "common.h"
 #include <plat/cpu.h>
 
 #include <mach/id.h>
diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S
index feb90a1..56964a0 100644
--- a/arch/arm/mach-omap2/include/mach/entry-macro.S
+++ b/arch/arm/mach-omap2/include/mach/entry-macro.S
@@ -10,146 +10,9 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-#include <mach/hardware.h>
-#include <mach/io.h>
-#include <mach/irqs.h>
-#include <asm/hardware/gic.h>
-
-#include <plat/omap24xx.h>
-#include <plat/omap34xx.h>
-#include <plat/omap44xx.h>
-
-#include <plat/multi.h>
-
-#define OMAP2_IRQ_BASE		OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE)
-#define OMAP3_IRQ_BASE		OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE)
-#define OMAP4_IRQ_BASE		OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
-#define INTCPS_SIR_IRQ_OFFSET	0x0040	/* omap2/3 active interrupt offset */
-#define	ACTIVEIRQ_MASK		0x7f	/* omap2/3 active interrupt bits */
 
 		.macro	disable_fiq
 		.endm
 
 		.macro  arch_ret_to_user, tmp1, tmp2
 		.endm
-
-/*
- * Unoptimized irq functions for multi-omap2, 3 and 4
- */
-
-#ifdef MULTI_OMAP2
-		/*
-		 * Configure the interrupt base on the first interrupt.
-		 * See also omap_irq_base_init for setting omap_irq_base.
-		 */
-		.macro  get_irqnr_preamble, base, tmp
-		ldr	\base, =omap_irq_base	@ irq base address
-		ldr	\base, [\base, #0]	@ irq base value
-		.endm
-
-		/* Check the pending interrupts. Note that base already set */
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		tst	\base, #0x100		@ gic address?
-		bne	4401f			@ found gic
-
-		/* Handle omap2 and omap3 */
-		ldr	\irqnr, [\base, #0x98] /* IRQ pending reg 1 */
-		cmp	\irqnr, #0x0
-		bne	9998f
-		ldr	\irqnr, [\base, #0xb8] /* IRQ pending reg 2 */
-		cmp	\irqnr, #0x0
-		bne	9998f
-		ldr	\irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
-		cmp	\irqnr, #0x0
-		bne	9998f
-
-		/*
-		 * ti816x has additional IRQ pending register. Checking this
-		 * register on omap2 & omap3 has no effect (read as 0).
-		 */
-		ldr	\irqnr, [\base, #0xf8] /* IRQ pending reg 4 */
-		cmp	\irqnr, #0x0
-9998:
-		ldrne	\irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET]
-		and	\irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */
-		b	9999f
-
-		/* Handle omap4 */
-4401:		ldr     \irqstat, [\base, #GIC_CPU_INTACK]
-		ldr     \tmp, =1021
-		bic     \irqnr, \irqstat, #0x1c00
-		cmp     \irqnr, #15
-		cmpcc   \irqnr, \irqnr
-		cmpne   \irqnr, \tmp
-		cmpcs   \irqnr, \irqnr
-9999:
-		.endm
-
-#ifdef CONFIG_SMP
-		/* We assume that irqstat (the raw value of the IRQ acknowledge
-		 * register) is preserved from the macro above.
-		 * If there is an IPI, we immediately signal end of interrupt
-		 * on the controller, since this requires the original irqstat
-		 * value which we won't easily be able to recreate later.
-		 */
-
-		.macro test_for_ipi, irqnr, irqstat, base, tmp
-		bic	\irqnr, \irqstat, #0x1c00
-		cmp	\irqnr, #16
-		it	cc
-		strcc	\irqstat, [\base, #GIC_CPU_EOI]
-		it	cs
-		cmpcs	\irqnr, \irqnr
-		.endm
-#endif	/* CONFIG_SMP */
-
-#else	/* MULTI_OMAP2 */
-
-
-/*
- * Optimized irq functions for omap2, 3 and 4
- */
-
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-		.macro  get_irqnr_preamble, base, tmp
-#ifdef CONFIG_ARCH_OMAP2
-		ldr	\base, =OMAP2_IRQ_BASE
-#else
-		ldr	\base, =OMAP3_IRQ_BASE
-#endif
-		.endm
-
-		/* Check the pending interrupts. Note that base already set */
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\irqnr, [\base, #0x98] /* IRQ pending reg 1 */
-		cmp	\irqnr, #0x0
-		bne	9999f
-		ldr	\irqnr, [\base, #0xb8] /* IRQ pending reg 2 */
-		cmp	\irqnr, #0x0
-		bne	9999f
-		ldr	\irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
-		cmp	\irqnr, #0x0
-#ifdef CONFIG_SOC_OMAPTI816X
-		bne	9999f
-		ldr	\irqnr, [\base, #0xf8] /* IRQ pending reg 4 */
-		cmp	\irqnr, #0x0
-#endif
-9999:
-		ldrne	\irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET]
-		and	\irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */
-
-		.endm
-#endif
-
-
-#ifdef CONFIG_ARCH_OMAP4
-#define HAVE_GET_IRQNR_PREAMBLE
-#include <asm/hardware/entry-macro-gic.S>
-
-		.macro  get_irqnr_preamble, base, tmp
-		ldr     \base, =OMAP4_IRQ_BASE
-		.endm
-
-#endif
-
-#endif	/* MULTI_OMAP2 */
diff --git a/arch/arm/mach-omap2/include/mach/omap4-common.h b/arch/arm/mach-omap2/include/mach/omap4-common.h
deleted file mode 100644
index e4bd87619..0000000
--- a/arch/arm/mach-omap2/include/mach/omap4-common.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * omap4-common.h: OMAP4 specific common header file
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- *
- * Author:
- *	Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef OMAP_ARCH_OMAP4_COMMON_H
-#define OMAP_ARCH_OMAP4_COMMON_H
-
-/*
- * wfi used in low power code. Directly opcode is used instead
- * of instruction to avoid mulit-omap build break
- */
-#ifdef CONFIG_THUMB2_KERNEL
-#define do_wfi() __asm__ __volatile__ ("wfi" : : : "memory")
-#else
-#define do_wfi()			\
-		__asm__ __volatile__ (".word	0xe320f003" : : : "memory")
-#endif
-
-#ifdef CONFIG_CACHE_L2X0
-extern void __iomem *l2cache_base;
-#endif
-
-extern void __iomem *gic_dist_base_addr;
-
-extern void __init gic_init_irq(void);
-extern void omap_smc1(u32 fn, u32 arg);
-
-#ifdef CONFIG_SMP
-/* Needed for secondary core boot */
-extern void omap_secondary_startup(void);
-extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask);
-extern void omap_auxcoreboot_addr(u32 cpu_addr);
-extern u32 omap_read_auxcoreboot0(void);
-#endif
-#endif
diff --git a/arch/arm/mach-omap2/include/mach/vmalloc.h b/arch/arm/mach-omap2/include/mach/vmalloc.h
deleted file mode 100644
index 8663199..0000000
--- a/arch/arm/mach-omap2/include/mach/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  arch/arm/plat-omap/include/mach/vmalloc.h
- *
- *  Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define VMALLOC_END	  0xf8000000UL
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 25d20ce..3f565dd 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -35,7 +35,7 @@
 #include "clock3xxx.h"
 #include "clock44xx.h"
 
-#include <plat/common.h>
+#include "common.h"
 #include <plat/omap-pm.h>
 #include "voltage.h"
 #include "powerdomain.h"
@@ -43,7 +43,7 @@
 #include "clockdomain.h"
 #include <plat/omap_hwmod.h>
 #include <plat/multi.h>
-#include <plat/common.h>
+#include "common.h"
 
 /*
  * The machine specific code may provide the extra mapping besides the
@@ -316,13 +316,9 @@ static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data)
 	return omap_hwmod_set_postsetup_state(oh, *(u8 *)data);
 }
 
-/* See irq.c, omap4-common.c and entry-macro.S */
-void __iomem *omap_irq_base;
-
 static void __init omap_common_init_early(void)
 {
 	omap2_check_revision();
-	omap_ioremap_init();
 	omap_init_consistent_dma_size();
 }
 
diff --git a/arch/arm/mach-omap2/io.h b/arch/arm/mach-omap2/io.h
deleted file mode 100644
index e69de29..0000000
--- a/arch/arm/mach-omap2/io.h
+++ /dev/null
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 65f1be6..42b1d65 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -15,6 +15,7 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <mach/hardware.h>
+#include <asm/exception.h>
 #include <asm/mach/irq.h>
 
 
@@ -35,6 +36,11 @@
 /* Number of IRQ state bits in each MIR register */
 #define IRQ_BITS_PER_REG	32
 
+#define OMAP2_IRQ_BASE		OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE)
+#define OMAP3_IRQ_BASE		OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE)
+#define INTCPS_SIR_IRQ_OFFSET	0x0040	/* omap2/3 active interrupt offset */
+#define ACTIVEIRQ_MASK		0x7f	/* omap2/3 active interrupt bits */
+
 /*
  * OMAP2 has a number of different interrupt controllers, each interrupt
  * controller is identified as its own "bank". Register definitions are
@@ -143,6 +149,7 @@ omap_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num)
 
 static void __init omap_init_irq(u32 base, int nr_irqs)
 {
+	void __iomem *omap_irq_base;
 	unsigned long nr_of_irqs = 0;
 	unsigned int nr_banks = 0;
 	int i, j;
@@ -191,6 +198,44 @@ void __init ti816x_init_irq(void)
 	omap_init_irq(OMAP34XX_IC_BASE, 128);
 }
 
+static inline void omap_intc_handle_irq(void __iomem *base_addr, struct pt_regs *regs)
+{
+	u32 irqnr;
+
+	do {
+		irqnr = readl_relaxed(base_addr + 0x98);
+		if (irqnr)
+			goto out;
+
+		irqnr = readl_relaxed(base_addr + 0xb8);
+		if (irqnr)
+			goto out;
+
+		irqnr = readl_relaxed(base_addr + 0xd8);
+#ifdef CONFIG_SOC_OMAPTI816X
+		if (irqnr)
+			goto out;
+		irqnr = readl_relaxed(base_addr + 0xf8);
+#endif
+
+out:
+		if (!irqnr)
+			break;
+
+		irqnr = readl_relaxed(base_addr + INTCPS_SIR_IRQ_OFFSET);
+		irqnr &= ACTIVEIRQ_MASK;
+
+		if (irqnr)
+			handle_IRQ(irqnr, regs);
+	} while (irqnr);
+}
+
+asmlinkage void __exception_irq_entry omap2_intc_handle_irq(struct pt_regs *regs)
+{
+	void __iomem *base_addr = OMAP2_IRQ_BASE;
+	omap_intc_handle_irq(base_addr, regs);
+}
+
 #ifdef CONFIG_ARCH_OMAP3
 static struct omap3_intc_regs intc_context[ARRAY_SIZE(irq_banks)];
 
@@ -263,4 +308,10 @@ void omap3_intc_resume_idle(void)
 	/* Re-enable autoidle */
 	intc_bank_write_reg(1, &irq_banks[0], INTC_SYSCONFIG);
 }
+
+asmlinkage void __exception_irq_entry omap3_intc_handle_irq(struct pt_regs *regs)
+{
+	void __iomem *base_addr = OMAP3_IRQ_BASE;
+	omap_intc_handle_irq(base_addr, regs);
+}
 #endif /* CONFIG_ARCH_OMAP3 */
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 292eee3..28fcb27 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -145,6 +145,9 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 		pdata->reg_size = 4;
 		pdata->has_ccr = true;
 	}
+	pdata->set_clk_src = omap2_mcbsp_set_clk_src;
+	if (id == 1)
+		pdata->mux_signal = omap2_mcbsp1_mux_rx_clk;
 
 	if (oh->class->rev == MCBSP_CONFIG_TYPE3) {
 		if (id == 2)
@@ -174,9 +177,6 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 					name, oh->name);
 		return PTR_ERR(pdev);
 	}
-	pdata->set_clk_src = omap2_mcbsp_set_clk_src;
-	if (id == 1)
-		pdata->mux_signal = omap2_mcbsp1_mux_rx_clk;
 	omap_mcbsp_count++;
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/omap-hotplug.c b/arch/arm/mach-omap2/omap-hotplug.c
index 4976b93..e5a1c3f 100644
--- a/arch/arm/mach-omap2/omap-hotplug.c
+++ b/arch/arm/mach-omap2/omap-hotplug.c
@@ -19,7 +19,8 @@
 #include <linux/smp.h>
 
 #include <asm/cacheflush.h>
-#include <mach/omap4-common.h>
+
+#include "common.h"
 
 int platform_cpu_kill(unsigned int cpu)
 {
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 4412ddb..e99bc6c 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -24,7 +24,8 @@
 #include <asm/hardware/gic.h>
 #include <asm/smp_scu.h>
 #include <mach/hardware.h>
-#include <mach/omap4-common.h>
+
+#include "common.h"
 
 /* SCU base address */
 static void __iomem *scu_base;
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 35ac3e5..beecfdd 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -22,17 +22,18 @@
 #include <plat/irqs.h>
 
 #include <mach/hardware.h>
-#include <mach/omap4-common.h>
+
+#include "common.h"
 
 #ifdef CONFIG_CACHE_L2X0
 void __iomem *l2cache_base;
 #endif
 
-void __iomem *gic_dist_base_addr;
-
-
 void __init gic_init_irq(void)
 {
+	void __iomem *omap_irq_base;
+	void __iomem *gic_dist_base_addr;
+
 	/* Static mapping, never released */
 	gic_dist_base_addr = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K);
 	BUG_ON(!gic_dist_base_addr);
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 6b3088d..529142a 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -137,7 +137,7 @@
 #include <linux/mutex.h>
 #include <linux/spinlock.h>
 
-#include <plat/common.h>
+#include "common.h"
 #include <plat/cpu.h>
 #include "clockdomain.h"
 #include "powerdomain.h"
@@ -749,7 +749,7 @@ static int _count_mpu_irqs(struct omap_hwmod *oh)
 		ohii = &oh->mpu_irqs[i++];
 	} while (ohii->irq != -1);
 
-	return i;
+	return i-1;
 }
 
 /**
@@ -772,7 +772,7 @@ static int _count_sdma_reqs(struct omap_hwmod *oh)
 		ohdi = &oh->sdma_reqs[i++];
 	} while (ohdi->dma_req != -1);
 
-	return i;
+	return i-1;
 }
 
 /**
@@ -795,7 +795,7 @@ static int _count_ocp_if_addr_spaces(struct omap_hwmod_ocp_if *os)
 		mem = &os->addr[i++];
 	} while (mem->pa_start != mem->pa_end);
 
-	return i;
+	return i-1;
 }
 
 /**
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index 6d72062..a5409ce 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -875,6 +875,10 @@ static struct omap_hwmod_ocp_if *omap2420_dss_slaves[] = {
 };
 
 static struct omap_hwmod_opt_clk dss_opt_clks[] = {
+	/*
+	 * The DSS HW needs all DSS clocks enabled during reset. The dss_core
+	 * driver does not use these clocks.
+	 */
 	{ .role = "tv_clk", .clk = "dss_54m_fck" },
 	{ .role = "sys_clk", .clk = "dss2_fck" },
 };
@@ -899,7 +903,7 @@ static struct omap_hwmod omap2420_dss_core_hwmod = {
 	.slaves_cnt	= ARRAY_SIZE(omap2420_dss_slaves),
 	.masters	= omap2420_dss_masters,
 	.masters_cnt	= ARRAY_SIZE(omap2420_dss_masters),
-	.flags		= HWMOD_NO_IDLEST,
+	.flags		= HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 };
 
 /* l4_core -> dss_dispc */
@@ -939,6 +943,7 @@ static struct omap_hwmod omap2420_dss_dispc_hwmod = {
 	.slaves		= omap2420_dss_dispc_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap2420_dss_dispc_slaves),
 	.flags		= HWMOD_NO_IDLEST,
+	.dev_attr	= &omap2_3_dss_dispc_dev_attr
 };
 
 /* l4_core -> dss_rfbi */
@@ -961,6 +966,10 @@ static struct omap_hwmod_ocp_if *omap2420_dss_rfbi_slaves[] = {
 	&omap2420_l4_core__dss_rfbi,
 };
 
+static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
+	{ .role = "ick", .clk = "dss_ick" },
+};
+
 static struct omap_hwmod omap2420_dss_rfbi_hwmod = {
 	.name		= "dss_rfbi",
 	.class		= &omap2_rfbi_hwmod_class,
@@ -972,6 +981,8 @@ static struct omap_hwmod omap2420_dss_rfbi_hwmod = {
 			.module_offs = CORE_MOD,
 		},
 	},
+	.opt_clks	= dss_rfbi_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(dss_rfbi_opt_clks),
 	.slaves		= omap2420_dss_rfbi_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap2420_dss_rfbi_slaves),
 	.flags		= HWMOD_NO_IDLEST,
@@ -981,7 +992,7 @@ static struct omap_hwmod omap2420_dss_rfbi_hwmod = {
 static struct omap_hwmod_ocp_if omap2420_l4_core__dss_venc = {
 	.master		= &omap2420_l4_core_hwmod,
 	.slave		= &omap2420_dss_venc_hwmod,
-	.clk		= "dss_54m_fck",
+	.clk		= "dss_ick",
 	.addr		= omap2_dss_venc_addrs,
 	.fw = {
 		.omap2 = {
@@ -1001,7 +1012,7 @@ static struct omap_hwmod_ocp_if *omap2420_dss_venc_slaves[] = {
 static struct omap_hwmod omap2420_dss_venc_hwmod = {
 	.name		= "dss_venc",
 	.class		= &omap2_venc_hwmod_class,
-	.main_clk	= "dss1_fck",
+	.main_clk	= "dss_54m_fck",
 	.prcm		= {
 		.omap2 = {
 			.prcm_reg_id = 1,
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index a2580d0..c4f56cb 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -942,6 +942,10 @@ static struct omap_hwmod_ocp_if *omap2430_dss_slaves[] = {
 };
 
 static struct omap_hwmod_opt_clk dss_opt_clks[] = {
+	/*
+	 * The DSS HW needs all DSS clocks enabled during reset. The dss_core
+	 * driver does not use these clocks.
+	 */
 	{ .role = "tv_clk", .clk = "dss_54m_fck" },
 	{ .role = "sys_clk", .clk = "dss2_fck" },
 };
@@ -966,7 +970,7 @@ static struct omap_hwmod omap2430_dss_core_hwmod = {
 	.slaves_cnt	= ARRAY_SIZE(omap2430_dss_slaves),
 	.masters	= omap2430_dss_masters,
 	.masters_cnt	= ARRAY_SIZE(omap2430_dss_masters),
-	.flags		= HWMOD_NO_IDLEST,
+	.flags		= HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 };
 
 /* l4_core -> dss_dispc */
@@ -1000,6 +1004,7 @@ static struct omap_hwmod omap2430_dss_dispc_hwmod = {
 	.slaves		= omap2430_dss_dispc_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap2430_dss_dispc_slaves),
 	.flags		= HWMOD_NO_IDLEST,
+	.dev_attr	= &omap2_3_dss_dispc_dev_attr
 };
 
 /* l4_core -> dss_rfbi */
@@ -1016,6 +1021,10 @@ static struct omap_hwmod_ocp_if *omap2430_dss_rfbi_slaves[] = {
 	&omap2430_l4_core__dss_rfbi,
 };
 
+static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
+	{ .role = "ick", .clk = "dss_ick" },
+};
+
 static struct omap_hwmod omap2430_dss_rfbi_hwmod = {
 	.name		= "dss_rfbi",
 	.class		= &omap2_rfbi_hwmod_class,
@@ -1027,6 +1036,8 @@ static struct omap_hwmod omap2430_dss_rfbi_hwmod = {
 			.module_offs = CORE_MOD,
 		},
 	},
+	.opt_clks	= dss_rfbi_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(dss_rfbi_opt_clks),
 	.slaves		= omap2430_dss_rfbi_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap2430_dss_rfbi_slaves),
 	.flags		= HWMOD_NO_IDLEST,
@@ -1036,7 +1047,7 @@ static struct omap_hwmod omap2430_dss_rfbi_hwmod = {
 static struct omap_hwmod_ocp_if omap2430_l4_core__dss_venc = {
 	.master		= &omap2430_l4_core_hwmod,
 	.slave		= &omap2430_dss_venc_hwmod,
-	.clk		= "dss_54m_fck",
+	.clk		= "dss_ick",
 	.addr		= omap2_dss_venc_addrs,
 	.flags		= OCPIF_SWSUP_IDLE,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
@@ -1050,7 +1061,7 @@ static struct omap_hwmod_ocp_if *omap2430_dss_venc_slaves[] = {
 static struct omap_hwmod omap2430_dss_venc_hwmod = {
 	.name		= "dss_venc",
 	.class		= &omap2_venc_hwmod_class,
-	.main_clk	= "dss1_fck",
+	.main_clk	= "dss_54m_fck",
 	.prcm		= {
 		.omap2 = {
 			.prcm_reg_id = 1,
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
index c451729..c11273d 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
@@ -11,6 +11,7 @@
 #include <plat/omap_hwmod.h>
 #include <plat/serial.h>
 #include <plat/dma.h>
+#include <plat/common.h>
 
 #include <mach/irqs.h>
 
@@ -43,13 +44,15 @@ static struct omap_hwmod_class_sysconfig omap2_dss_sysc = {
 	.rev_offs	= 0x0000,
 	.sysc_offs	= 0x0010,
 	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+	.sysc_flags	= (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+			   SYSS_HAS_RESET_STATUS),
 	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
 
 struct omap_hwmod_class omap2_dss_hwmod_class = {
 	.name	= "dss",
 	.sysc	= &omap2_dss_sysc,
+	.reset	= omap_dss_reset,
 };
 
 /*
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index bc9035e..eef43e2 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -1369,9 +1369,14 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_slaves[] = {
 };
 
 static struct omap_hwmod_opt_clk dss_opt_clks[] = {
-	{ .role = "tv_clk", .clk = "dss_tv_fck" },
-	{ .role = "video_clk", .clk = "dss_96m_fck" },
+	/*
+	 * The DSS HW needs all DSS clocks enabled during reset. The dss_core
+	 * driver does not use these clocks.
+	 */
 	{ .role = "sys_clk", .clk = "dss2_alwon_fck" },
+	{ .role = "tv_clk", .clk = "dss_tv_fck" },
+	/* required only on OMAP3430 */
+	{ .role = "tv_dac_clk", .clk = "dss_96m_fck" },
 };
 
 static struct omap_hwmod omap3430es1_dss_core_hwmod = {
@@ -1394,11 +1399,12 @@ static struct omap_hwmod omap3430es1_dss_core_hwmod = {
 	.slaves_cnt	= ARRAY_SIZE(omap3430es1_dss_slaves),
 	.masters	= omap3xxx_dss_masters,
 	.masters_cnt	= ARRAY_SIZE(omap3xxx_dss_masters),
-	.flags		= HWMOD_NO_IDLEST,
+	.flags		= HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 };
 
 static struct omap_hwmod omap3xxx_dss_core_hwmod = {
 	.name		= "dss_core",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.class		= &omap2_dss_hwmod_class,
 	.main_clk	= "dss1_alwon_fck", /* instead of dss_fck */
 	.sdma_reqs	= omap3xxx_dss_sdma_chs,
@@ -1456,6 +1462,7 @@ static struct omap_hwmod omap3xxx_dss_dispc_hwmod = {
 	.slaves		= omap3xxx_dss_dispc_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap3xxx_dss_dispc_slaves),
 	.flags		= HWMOD_NO_IDLEST,
+	.dev_attr	= &omap2_3_dss_dispc_dev_attr
 };
 
 /*
@@ -1486,6 +1493,7 @@ static struct omap_hwmod_addr_space omap3xxx_dss_dsi1_addrs[] = {
 static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dsi1 = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap3xxx_dss_dsi1_hwmod,
+	.clk		= "dss_ick",
 	.addr		= omap3xxx_dss_dsi1_addrs,
 	.fw = {
 		.omap2 = {
@@ -1502,6 +1510,10 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_dsi1_slaves[] = {
 	&omap3xxx_l4_core__dss_dsi1,
 };
 
+static struct omap_hwmod_opt_clk dss_dsi1_opt_clks[] = {
+	{ .role = "sys_clk", .clk = "dss2_alwon_fck" },
+};
+
 static struct omap_hwmod omap3xxx_dss_dsi1_hwmod = {
 	.name		= "dss_dsi1",
 	.class		= &omap3xxx_dsi_hwmod_class,
@@ -1514,6 +1526,8 @@ static struct omap_hwmod omap3xxx_dss_dsi1_hwmod = {
 			.module_offs = OMAP3430_DSS_MOD,
 		},
 	},
+	.opt_clks	= dss_dsi1_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(dss_dsi1_opt_clks),
 	.slaves		= omap3xxx_dss_dsi1_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap3xxx_dss_dsi1_slaves),
 	.flags		= HWMOD_NO_IDLEST,
@@ -1540,6 +1554,10 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_rfbi_slaves[] = {
 	&omap3xxx_l4_core__dss_rfbi,
 };
 
+static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
+	{ .role = "ick", .clk = "dss_ick" },
+};
+
 static struct omap_hwmod omap3xxx_dss_rfbi_hwmod = {
 	.name		= "dss_rfbi",
 	.class		= &omap2_rfbi_hwmod_class,
@@ -1551,6 +1569,8 @@ static struct omap_hwmod omap3xxx_dss_rfbi_hwmod = {
 			.module_offs = OMAP3430_DSS_MOD,
 		},
 	},
+	.opt_clks	= dss_rfbi_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(dss_rfbi_opt_clks),
 	.slaves		= omap3xxx_dss_rfbi_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap3xxx_dss_rfbi_slaves),
 	.flags		= HWMOD_NO_IDLEST,
@@ -1560,7 +1580,7 @@ static struct omap_hwmod omap3xxx_dss_rfbi_hwmod = {
 static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_venc = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap3xxx_dss_venc_hwmod,
-	.clk		= "dss_tv_fck",
+	.clk		= "dss_ick",
 	.addr		= omap2_dss_venc_addrs,
 	.fw = {
 		.omap2 = {
@@ -1578,10 +1598,15 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_venc_slaves[] = {
 	&omap3xxx_l4_core__dss_venc,
 };
 
+static struct omap_hwmod_opt_clk dss_venc_opt_clks[] = {
+	/* required only on OMAP3430 */
+	{ .role = "tv_dac_clk", .clk = "dss_96m_fck" },
+};
+
 static struct omap_hwmod omap3xxx_dss_venc_hwmod = {
 	.name		= "dss_venc",
 	.class		= &omap2_venc_hwmod_class,
-	.main_clk	= "dss1_alwon_fck",
+	.main_clk	= "dss_tv_fck",
 	.prcm		= {
 		.omap2 = {
 			.prcm_reg_id = 1,
@@ -1589,6 +1614,8 @@ static struct omap_hwmod omap3xxx_dss_venc_hwmod = {
 			.module_offs = OMAP3430_DSS_MOD,
 		},
 	},
+	.opt_clks	= dss_venc_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(dss_venc_opt_clks),
 	.slaves		= omap3xxx_dss_venc_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap3xxx_dss_venc_slaves),
 	.flags		= HWMOD_NO_IDLEST,
@@ -3220,18 +3247,14 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
 
 /* 3430ES1-only hwmods */
 static __initdata struct omap_hwmod *omap3430es1_hwmods[] = {
-	&omap3xxx_iva_hwmod,
 	&omap3430es1_dss_core_hwmod,
-	&omap3xxx_mailbox_hwmod,
 	NULL
 };
 
 /* 3430ES2+-only hwmods */
 static __initdata struct omap_hwmod *omap3430es2plus_hwmods[] = {
-	&omap3xxx_iva_hwmod,
 	&omap3xxx_dss_core_hwmod,
 	&omap3xxx_usbhsotg_hwmod,
-	&omap3xxx_mailbox_hwmod,
 	NULL
 };
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 7695e5d..daaf165 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -30,6 +30,7 @@
 #include <plat/mmc.h>
 #include <plat/i2c.h>
 #include <plat/dmtimer.h>
+#include <plat/common.h>
 
 #include "omap_hwmod_common_data.h"
 
@@ -1187,6 +1188,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_dss_sysc = {
 static struct omap_hwmod_class omap44xx_dss_hwmod_class = {
 	.name	= "dss",
 	.sysc	= &omap44xx_dss_sysc,
+	.reset	= omap_dss_reset,
 };
 
 /* dss */
@@ -1240,12 +1242,12 @@ static struct omap_hwmod_ocp_if *omap44xx_dss_slaves[] = {
 static struct omap_hwmod_opt_clk dss_opt_clks[] = {
 	{ .role = "sys_clk", .clk = "dss_sys_clk" },
 	{ .role = "tv_clk", .clk = "dss_tv_clk" },
-	{ .role = "dss_clk", .clk = "dss_dss_clk" },
-	{ .role = "video_clk", .clk = "dss_48mhz_clk" },
+	{ .role = "hdmi_clk", .clk = "dss_48mhz_clk" },
 };
 
 static struct omap_hwmod omap44xx_dss_hwmod = {
 	.name		= "dss_core",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.class		= &omap44xx_dss_hwmod_class,
 	.clkdm_name	= "l3_dss_clkdm",
 	.main_clk	= "dss_dss_clk",
@@ -1325,6 +1327,11 @@ static struct omap_hwmod_addr_space omap44xx_dss_dispc_addrs[] = {
 	{ }
 };
 
+static struct omap_dss_dispc_dev_attr omap44xx_dss_dispc_dev_attr = {
+	.manager_count		= 3,
+	.has_framedonetv_irq	= 1
+};
+
 /* l4_per -> dss_dispc */
 static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dispc = {
 	.master		= &omap44xx_l4_per_hwmod,
@@ -1340,12 +1347,6 @@ static struct omap_hwmod_ocp_if *omap44xx_dss_dispc_slaves[] = {
 	&omap44xx_l4_per__dss_dispc,
 };
 
-static struct omap_hwmod_opt_clk dss_dispc_opt_clks[] = {
-	{ .role = "sys_clk", .clk = "dss_sys_clk" },
-	{ .role = "tv_clk", .clk = "dss_tv_clk" },
-	{ .role = "hdmi_clk", .clk = "dss_48mhz_clk" },
-};
-
 static struct omap_hwmod omap44xx_dss_dispc_hwmod = {
 	.name		= "dss_dispc",
 	.class		= &omap44xx_dispc_hwmod_class,
@@ -1359,10 +1360,9 @@ static struct omap_hwmod omap44xx_dss_dispc_hwmod = {
 			.context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET,
 		},
 	},
-	.opt_clks	= dss_dispc_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(dss_dispc_opt_clks),
 	.slaves		= omap44xx_dss_dispc_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap44xx_dss_dispc_slaves),
+	.dev_attr	= &omap44xx_dss_dispc_dev_attr
 };
 
 /*
@@ -1624,7 +1624,7 @@ static struct omap_hwmod omap44xx_dss_hdmi_hwmod = {
 	.clkdm_name	= "l3_dss_clkdm",
 	.mpu_irqs	= omap44xx_dss_hdmi_irqs,
 	.sdma_reqs	= omap44xx_dss_hdmi_sdma_reqs,
-	.main_clk	= "dss_dss_clk",
+	.main_clk	= "dss_48mhz_clk",
 	.prcm = {
 		.omap4 = {
 			.clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
@@ -1785,7 +1785,7 @@ static struct omap_hwmod omap44xx_dss_venc_hwmod = {
 	.name		= "dss_venc",
 	.class		= &omap44xx_venc_hwmod_class,
 	.clkdm_name	= "l3_dss_clkdm",
-	.main_clk	= "dss_dss_clk",
+	.main_clk	= "dss_tv_clk",
 	.prcm = {
 		.omap4 = {
 			.clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.c b/arch/arm/mach-omap2/omap_hwmod_common_data.c
index de832eb..51e5418 100644
--- a/arch/arm/mach-omap2/omap_hwmod_common_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.c
@@ -49,3 +49,7 @@ struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2 = {
 	.srst_shift	= SYSC_TYPE2_SOFTRESET_SHIFT,
 };
 
+struct omap_dss_dispc_dev_attr omap2_3_dss_dispc_dev_attr = {
+	.manager_count		= 2,
+	.has_framedonetv_irq	= 0
+};
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h
index 39a7c37..ad5d8f0 100644
--- a/arch/arm/mach-omap2/omap_hwmod_common_data.h
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h
@@ -16,6 +16,8 @@
 
 #include <plat/omap_hwmod.h>
 
+#include "display.h"
+
 /* Common address space across OMAP2xxx */
 extern struct omap_hwmod_addr_space omap2xxx_uart1_addr_space[];
 extern struct omap_hwmod_addr_space omap2xxx_uart2_addr_space[];
@@ -111,4 +113,6 @@ extern struct omap_hwmod_class omap2xxx_dma_hwmod_class;
 extern struct omap_hwmod_class omap2xxx_mailbox_hwmod_class;
 extern struct omap_hwmod_class omap2xxx_mcspi_class;
 
+extern struct omap_dss_dispc_dev_attr omap2_3_dss_dispc_dev_attr;
+
 #endif
diff --git a/arch/arm/mach-omap2/omap_l3_noc.c b/arch/arm/mach-omap2/omap_l3_noc.c
index 6a66aa5..d15225f 100644
--- a/arch/arm/mach-omap2/omap_l3_noc.c
+++ b/arch/arm/mach-omap2/omap_l3_noc.c
@@ -237,7 +237,7 @@ static int __devexit omap4_l3_remove(struct platform_device *pdev)
 static const struct of_device_id l3_noc_match[] = {
 	{.compatible = "ti,omap4-l3-noc", },
 	{},
-}
+};
 MODULE_DEVICE_TABLE(of, l3_noc_match);
 #else
 #define l3_noc_match NULL
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 1e79bdf..1881fe9 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -18,12 +18,13 @@
 
 #include <plat/omap-pm.h>
 #include <plat/omap_device.h>
-#include <plat/common.h>
+#include "common.h"
 
 #include "voltage.h"
 #include "powerdomain.h"
 #include "clockdomain.h"
 #include "pm.h"
+#include "twl-common.h"
 
 static struct omap_device_pm_latency *pm_lats;
 
@@ -226,11 +227,8 @@ postcore_initcall(omap2_common_pm_init);
 
 static int __init omap2_common_pm_late_init(void)
 {
-	/* Init the OMAP TWL parameters */
-	omap3_twl_init();
-	omap4_twl_init();
-
 	/* Init the voltage layer */
+	omap_pmic_late_init();
 	omap_voltage_late_init();
 
 	/* Initialize the voltages */
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index cf0c216..ef8595c 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -42,6 +42,7 @@
 #include <plat/dma.h>
 #include <plat/board.h>
 
+#include "common.h"
 #include "prm2xxx_3xxx.h"
 #include "prm-regbits-24xx.h"
 #include "cm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index efa6649..fa637df 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -42,6 +42,7 @@
 #include <plat/gpmc.h>
 #include <plat/dma.h>
 
+#include "common.h"
 #include "cm2xxx_3xxx.h"
 #include "cm-regbits-34xx.h"
 #include "prm-regbits-34xx.h"
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index 59a870b..8edb015 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -16,8 +16,8 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 
+#include "common.h"
 #include "powerdomain.h"
-#include <mach/omap4-common.h>
 
 struct power_state {
 	struct powerdomain *pwrdm;
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index 597e2da..626acfa 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -25,8 +25,7 @@
 #include <linux/delay.h>
 #include <linux/export.h>
 
-#include <mach/system.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/prcm.h>
 #include <plat/irqs.h>
 
@@ -59,7 +58,7 @@ u32 omap_prcm_get_reset_sources(void)
 EXPORT_SYMBOL(omap_prcm_get_reset_sources);
 
 /* Resets clock rates and reboots the system. Only called from system.h */
-static void omap_prcm_arch_reset(char mode, const char *cmd)
+void omap_prcm_restart(char mode, const char *cmd)
 {
 	s16 prcm_offs = 0;
 
@@ -110,8 +109,6 @@ static void omap_prcm_arch_reset(char mode, const char *cmd)
 	omap2_prm_read_mod_reg(prcm_offs, OMAP2_RM_RSTCTRL); /* OCP barrier */
 }
 
-void (*arch_reset)(char, const char *) = omap_prcm_arch_reset;
-
 /**
  * omap2_cm_wait_idlest - wait for IDLEST bit to indicate module readiness
  * @reg: physical address of module IDLEST register
diff --git a/arch/arm/mach-omap2/prcm_mpu44xx.c b/arch/arm/mach-omap2/prcm_mpu44xx.c
index 171fe17..ca669b5 100644
--- a/arch/arm/mach-omap2/prcm_mpu44xx.c
+++ b/arch/arm/mach-omap2/prcm_mpu44xx.c
@@ -15,7 +15,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include <plat/common.h>
+#include "common.h"
 
 #include "prcm_mpu44xx.h"
 #include "cm-regbits-44xx.h"
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c
index f02d87f..9a08ba3 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c
@@ -16,7 +16,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include <plat/common.h>
+#include "common.h"
 #include <plat/cpu.h>
 #include <plat/prcm.h>
 
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index 495a31a..dd885ee 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -17,7 +17,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include <plat/common.h>
+#include "common.h"
 #include <plat/cpu.h>
 #include <plat/prcm.h>
 
diff --git a/arch/arm/mach-omap2/prminst44xx.c b/arch/arm/mach-omap2/prminst44xx.c
index 3a7bab1..f6de5bc 100644
--- a/arch/arm/mach-omap2/prminst44xx.c
+++ b/arch/arm/mach-omap2/prminst44xx.c
@@ -16,7 +16,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include <plat/common.h>
+#include "common.h"
 
 #include "prm44xx.h"
 #include "prminst44xx.h"
diff --git a/arch/arm/mach-omap2/sdram-nokia.c b/arch/arm/mach-omap2/sdram-nokia.c
index 14caa22..ee3a8ad 100644
--- a/arch/arm/mach-omap2/sdram-nokia.c
+++ b/arch/arm/mach-omap2/sdram-nokia.c
@@ -18,7 +18,7 @@
 #include <linux/io.h>
 
 #include <plat/io.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/clock.h>
 #include <plat/sdrc.h>
 
diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c
index 8f27828..e3d345f 100644
--- a/arch/arm/mach-omap2/sdrc.c
+++ b/arch/arm/mach-omap2/sdrc.c
@@ -23,7 +23,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <plat/common.h>
+#include "common.h"
 #include <plat/clock.h>
 #include <plat/sram.h>
 
diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c
index ccdb010..791a63c 100644
--- a/arch/arm/mach-omap2/sdrc2xxx.c
+++ b/arch/arm/mach-omap2/sdrc2xxx.c
@@ -24,7 +24,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <plat/common.h>
+#include "common.h"
 #include <plat/clock.h>
 #include <plat/sram.h>
 
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 9992dbf..42c3267 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -33,7 +33,7 @@
 #include <plat/omap-serial.h>
 #endif
 
-#include <plat/common.h>
+#include "common.h"
 #include <plat/board.h>
 #include <plat/clock.h>
 #include <plat/dma.h>
diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
index 6a4f683..9dd93453 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -26,7 +26,7 @@
 #include <linux/slab.h>
 #include <linux/pm_runtime.h>
 
-#include <plat/common.h>
+#include "common.h"
 
 #include "pm.h"
 #include "smartreflex.h"
@@ -139,7 +139,7 @@ static irqreturn_t sr_interrupt(int irq, void *data)
 		sr_write_reg(sr_info, ERRCONFIG_V1, status);
 	} else if (sr_info->ip_type == SR_TYPE_V2) {
 		/* Read the status bits */
-		sr_read_reg(sr_info, IRQSTATUS);
+		status = sr_read_reg(sr_info, IRQSTATUS);
 
 		/* Clear them by writing back */
 		sr_write_reg(sr_info, IRQSTATUS, status);
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 037b0d7..6eeff0e 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -41,7 +41,7 @@
 #include <plat/dmtimer.h>
 #include <asm/localtimer.h>
 #include <asm/sched_clock.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
 #include <plat/omap-pm.h>
@@ -254,7 +254,6 @@ static struct omap_dm_timer clksrc;
 /*
  * clocksource
  */
-static DEFINE_CLOCK_DATA(cd);
 static cycle_t clocksource_read_cycles(struct clocksource *cs)
 {
 	return (cycle_t)__omap_dm_timer_read_counter(&clksrc, 1);
@@ -268,23 +267,12 @@ static struct clocksource clocksource_gpt = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-static void notrace dmtimer_update_sched_clock(void)
+static u32 notrace dmtimer_read_sched_clock(void)
 {
-	u32 cyc;
-
-	cyc = __omap_dm_timer_read_counter(&clksrc, 1);
-
-	update_sched_clock(&cd, cyc, (u32)~0);
-}
-
-unsigned long long notrace sched_clock(void)
-{
-	u32 cyc = 0;
-
 	if (clksrc.reserved)
-		cyc = __omap_dm_timer_read_counter(&clksrc, 1);
+		return __omap_dm_timer_read_counter(clksrc.io_base, 1);
 
-	return cyc_to_sched_clock(&cd, cyc, (u32)~0);
+	return 0;
 }
 
 /* Setup free-running counter for clocksource */
@@ -301,7 +289,7 @@ static void __init omap2_gp_clocksource_init(int gptimer_id,
 
 	__omap_dm_timer_load_start(&clksrc,
 			OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR, 0, 1);
-	init_sched_clock(&cd, dmtimer_update_sched_clock, 32, clksrc.rate);
+	setup_sched_clock(dmtimer_read_sched_clock, 32, clksrc.rate);
 
 	if (clocksource_register_hz(&clocksource_gpt, clksrc.rate))
 		pr_err("Could not register clocksource %s\n",
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 52243577..10b20c6 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -30,6 +30,7 @@
 #include <plat/usb.h>
 
 #include "twl-common.h"
+#include "pm.h"
 
 static struct i2c_board_info __initdata pmic_i2c_board_info = {
 	.addr		= 0x48,
@@ -48,6 +49,16 @@ void __init omap_pmic_init(int bus, u32 clkrate,
 	omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1);
 }
 
+void __init omap_pmic_late_init(void)
+{
+	/* Init the OMAP TWL parameters (if PMIC has been registerd) */
+	if (!pmic_i2c_board_info.irq)
+		return;
+
+	omap3_twl_init();
+	omap4_twl_init();
+}
+
 #if defined(CONFIG_ARCH_OMAP3)
 static struct twl4030_usb_data omap3_usb_pdata = {
 	.usb_mode	= T2_USB_MODE_ULPI,
diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h
index 5e83a5b..275dde8 100644
--- a/arch/arm/mach-omap2/twl-common.h
+++ b/arch/arm/mach-omap2/twl-common.h
@@ -1,6 +1,8 @@
 #ifndef __OMAP_PMIC_COMMON__
 #define __OMAP_PMIC_COMMON__
 
+#include <plat/irqs.h>
+
 #define TWL_COMMON_PDATA_USB		(1 << 0)
 #define TWL_COMMON_PDATA_BCI		(1 << 1)
 #define TWL_COMMON_PDATA_MADC		(1 << 2)
@@ -30,6 +32,7 @@ struct twl4030_platform_data;
 
 void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq,
 		    struct twl4030_platform_data *pmic_data);
+void omap_pmic_late_init(void);
 
 static inline void omap2_pmic_init(const char *pmic_type,
 				   struct twl4030_platform_data *pmic_data)
diff --git a/arch/arm/mach-omap2/vc3xxx_data.c b/arch/arm/mach-omap2/vc3xxx_data.c
index cfe348e..a5ec7f8f 100644
--- a/arch/arm/mach-omap2/vc3xxx_data.c
+++ b/arch/arm/mach-omap2/vc3xxx_data.c
@@ -18,7 +18,7 @@
 #include <linux/err.h>
 #include <linux/init.h>
 
-#include <plat/common.h>
+#include "common.h"
 
 #include "prm-regbits-34xx.h"
 #include "voltage.h"
diff --git a/arch/arm/mach-omap2/vc44xx_data.c b/arch/arm/mach-omap2/vc44xx_data.c
index 2740a96..d70b930 100644
--- a/arch/arm/mach-omap2/vc44xx_data.c
+++ b/arch/arm/mach-omap2/vc44xx_data.c
@@ -18,7 +18,7 @@
 #include <linux/err.h>
 #include <linux/init.h>
 
-#include <plat/common.h>
+#include "common.h"
 
 #include "prm44xx.h"
 #include "prm-regbits-44xx.h"
diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c
index 1f8fdf7..8a36342 100644
--- a/arch/arm/mach-omap2/voltage.c
+++ b/arch/arm/mach-omap2/voltage.c
@@ -27,7 +27,7 @@
 #include <linux/slab.h>
 #include <linux/clk.h>
 
-#include <plat/common.h>
+#include "common.h"
 
 #include "prm-regbits-34xx.h"
 #include "prm-regbits-44xx.h"
diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c
index 071101d..474559d 100644
--- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c
+++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c
@@ -18,7 +18,7 @@
 #include <linux/err.h>
 #include <linux/init.h>
 
-#include <plat/common.h>
+#include "common.h"
 #include <plat/cpu.h>
 
 #include "prm-regbits-34xx.h"
diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c
index c4584e9..4e11d02 100644
--- a/arch/arm/mach-omap2/voltagedomains44xx_data.c
+++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c
@@ -21,7 +21,7 @@
 #include <linux/err.h>
 #include <linux/init.h>
 
-#include <plat/common.h>
+#include "common.h"
 
 #include "prm-regbits-44xx.h"
 #include "prm44xx.h"
diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c
index 66bd700..807391d 100644
--- a/arch/arm/mach-omap2/vp.c
+++ b/arch/arm/mach-omap2/vp.c
@@ -1,7 +1,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 
-#include <plat/common.h>
+#include "common.h"
 
 #include "voltage.h"
 #include "vp.h"
diff --git a/arch/arm/mach-omap2/vp3xxx_data.c b/arch/arm/mach-omap2/vp3xxx_data.c
index 260c554..bd89f80 100644
--- a/arch/arm/mach-omap2/vp3xxx_data.c
+++ b/arch/arm/mach-omap2/vp3xxx_data.c
@@ -19,7 +19,7 @@
 #include <linux/err.h>
 #include <linux/init.h>
 
-#include <plat/common.h>
+#include "common.h"
 
 #include "prm-regbits-34xx.h"
 #include "voltage.h"
diff --git a/arch/arm/mach-omap2/vp44xx_data.c b/arch/arm/mach-omap2/vp44xx_data.c
index b4e7704..8c031d1 100644
--- a/arch/arm/mach-omap2/vp44xx_data.c
+++ b/arch/arm/mach-omap2/vp44xx_data.c
@@ -19,7 +19,7 @@
 #include <linux/err.h>
 #include <linux/init.h>
 
-#include <plat/common.h>
+#include "common.h"
 
 #include "prm44xx.h"
 #include "prm-regbits-44xx.h"
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 22ace0b..41127e8 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -18,6 +18,7 @@
 #include <linux/mbus.h>
 #include <linux/mv643xx_i2c.h>
 #include <linux/ata_platform.h>
+#include <linux/delay.h>
 #include <net/dsa.h>
 #include <asm/page.h>
 #include <asm/setup.h>
@@ -304,6 +305,17 @@ void __init orion5x_init(void)
 	orion5x_wdt_init();
 }
 
+void orion5x_restart(char mode, const char *cmd)
+{
+	/*
+	 * Enable and issue soft reset
+	 */
+	orion5x_setbits(RSTOUTn_MASK, (1 << 2));
+	orion5x_setbits(CPU_SOFT_RESET, 1);
+	mdelay(200);
+	orion5x_clrbits(CPU_SOFT_RESET, 1);
+}
+
 /*
  * Many orion-based systems have buggy bootloader implementations.
  * This is a common fixup for bogus memory tags.
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index 909489f..37ef18d 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -39,6 +39,7 @@ void orion5x_spi_init(void);
 void orion5x_uart0_init(void);
 void orion5x_uart1_init(void);
 void orion5x_xor_init(void);
+void orion5x_restart(char, const char *);
 
 /*
  * PCIe/PCI functions.
diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c
index 8c83009..d75dcfa 100644
--- a/arch/arm/mach-orion5x/d2net-setup.c
+++ b/arch/arm/mach-orion5x/d2net-setup.c
@@ -343,6 +343,7 @@ MACHINE_START(D2NET, "LaCie d2 Network")
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
 	.fixup		= tag_fixup_mem32,
+	.restart	= orion5x_restart,
 MACHINE_END
 #endif
 
@@ -355,6 +356,7 @@ MACHINE_START(BIGDISK, "LaCie Big Disk Network")
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
 	.fixup		= tag_fixup_mem32,
+	.restart	= orion5x_restart,
 MACHINE_END
 #endif
 
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index 4b79a80..a104d5a 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -364,4 +364,5 @@ MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board")
 	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
+	.restart	= orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 343f60e..91b0f47 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -736,4 +736,5 @@ MACHINE_START(DNS323, "D-Link DNS-323")
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
 	.fixup		= tag_fixup_mem32,
+	.restart	= orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c
index 70a4e92..355e962 100644
--- a/arch/arm/mach-orion5x/edmini_v2-setup.c
+++ b/arch/arm/mach-orion5x/edmini_v2-setup.c
@@ -258,4 +258,5 @@ MACHINE_START(EDMINI_V2, "LaCie Ethernet Disk mini V2")
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
 	.fixup		= tag_fixup_mem32,
+	.restart	= orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/include/mach/io.h b/arch/arm/mach-orion5x/include/mach/io.h
index c519610..e9d9afd 100644
--- a/arch/arm/mach-orion5x/include/mach/io.h
+++ b/arch/arm/mach-orion5x/include/mach/io.h
@@ -15,31 +15,6 @@
 
 #define IO_SPACE_LIMIT		0xffffffff
 
-static inline void __iomem *
-__arch_ioremap(unsigned long paddr, size_t size, unsigned int mtype)
-{
-	void __iomem *retval;
-	unsigned long offs = paddr - ORION5X_REGS_PHYS_BASE;
-	if (mtype == MT_DEVICE && size && offs < ORION5X_REGS_SIZE &&
-	    size <= ORION5X_REGS_SIZE && offs + size <= ORION5X_REGS_SIZE) {
-		retval = (void __iomem *)ORION5X_REGS_VIRT_BASE + offs;
-	} else {
-		retval = __arm_ioremap(paddr, size, mtype);
-	}
-
-	return retval;
-}
-
-static inline void
-__arch_iounmap(void __iomem *addr)
-{
-	if (addr < (void __iomem *)ORION5X_REGS_VIRT_BASE ||
-	    addr >= (void __iomem *)(ORION5X_REGS_VIRT_BASE + ORION5X_REGS_SIZE))
-		__iounmap(addr);
-}
-
-#define __arch_ioremap		__arch_ioremap
-#define __arch_iounmap		__arch_iounmap
 #define __io(a)			__typesafe_io(a)
 #define __mem_pci(a)		(a)
 
diff --git a/arch/arm/mach-orion5x/include/mach/system.h b/arch/arm/mach-orion5x/include/mach/system.h
index a1d6e46..825a265 100644
--- a/arch/arm/mach-orion5x/include/mach/system.h
+++ b/arch/arm/mach-orion5x/include/mach/system.h
@@ -11,23 +11,9 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <mach/bridge-regs.h>
-
 static inline void arch_idle(void)
 {
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode, const char *cmd)
-{
-	/*
-	 * Enable and issue soft reset
-	 */
-	orion5x_setbits(RSTOUTn_MASK, (1 << 2));
-	orion5x_setbits(CPU_SOFT_RESET, 1);
-	mdelay(200);
-	orion5x_clrbits(CPU_SOFT_RESET, 1);
-}
-
-
 #endif
diff --git a/arch/arm/mach-orion5x/include/mach/vmalloc.h b/arch/arm/mach-orion5x/include/mach/vmalloc.h
deleted file mode 100644
index 06b50ae..0000000
--- a/arch/arm/mach-orion5x/include/mach/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-orion5x/include/mach/vmalloc.h
- */
-
-#define VMALLOC_END       0xfd800000UL
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index d3cd3f6..47587b8 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -386,6 +386,7 @@ MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro")
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
 	.fixup		= tag_fixup_mem32,
+	.restart	= orion5x_restart,
 MACHINE_END
 #endif
 
@@ -399,5 +400,6 @@ MACHINE_START(LINKSTATION_PRO, "Buffalo Linkstation Pro/Live")
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
 	.fixup		= tag_fixup_mem32,
+	.restart	= orion5x_restart,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-orion5x/ls-chl-setup.c b/arch/arm/mach-orion5x/ls-chl-setup.c
index 9503fff..5272131 100644
--- a/arch/arm/mach-orion5x/ls-chl-setup.c
+++ b/arch/arm/mach-orion5x/ls-chl-setup.c
@@ -140,7 +140,7 @@ static struct mv_sata_platform_data lschl_sata_data = {
 
 static void lschl_power_off(void)
 {
-	arm_machine_restart('h', NULL);
+	orion5x_restart('h', NULL);
 }
 
 /*****************************************************************************
@@ -325,4 +325,5 @@ MACHINE_START(LINKSTATION_LSCHL, "Buffalo Linkstation LiveV3 (LS-CHL)")
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
 	.fixup		= tag_fixup_mem32,
+	.restart	= orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c
index ed6d772..9a8697b 100644
--- a/arch/arm/mach-orion5x/ls_hgl-setup.c
+++ b/arch/arm/mach-orion5x/ls_hgl-setup.c
@@ -186,7 +186,7 @@ static struct mv_sata_platform_data ls_hgl_sata_data = {
 
 static void ls_hgl_power_off(void)
 {
-	arm_machine_restart('h', NULL);
+	orion5x_restart('h', NULL);
 }
 
 
@@ -272,4 +272,5 @@ MACHINE_START(LINKSTATION_LS_HGL, "Buffalo Linkstation LS-HGL")
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
 	.fixup		= tag_fixup_mem32,
+	.restart	= orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c
index 743f7f1..09c7365 100644
--- a/arch/arm/mach-orion5x/lsmini-setup.c
+++ b/arch/arm/mach-orion5x/lsmini-setup.c
@@ -186,7 +186,7 @@ static struct mv_sata_platform_data lsmini_sata_data = {
 
 static void lsmini_power_off(void)
 {
-	arm_machine_restart('h', NULL);
+	orion5x_restart('h', NULL);
 }
 
 
@@ -274,5 +274,6 @@ MACHINE_START(LINKSTATION_MINI, "Buffalo Linkstation Mini")
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
 	.fixup		= tag_fixup_mem32,
+	.restart	= orion5x_restart,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c
index 6020e26b..65faaa3 100644
--- a/arch/arm/mach-orion5x/mss2-setup.c
+++ b/arch/arm/mach-orion5x/mss2-setup.c
@@ -267,5 +267,6 @@ MACHINE_START(MSS2, "Maxtor Shared Storage II")
 	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
-	.fixup		= tag_fixup_mem32
+	.fixup		= tag_fixup_mem32,
+	.restart	= orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
index 201ae36..c87fde4 100644
--- a/arch/arm/mach-orion5x/mv2120-setup.c
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -234,5 +234,6 @@ MACHINE_START(MV2120, "HP Media Vault mv2120")
 	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
-	.fixup		= tag_fixup_mem32
+	.fixup		= tag_fixup_mem32,
+	.restart	= orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
index 6197c79..0180c39 100644
--- a/arch/arm/mach-orion5x/net2big-setup.c
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -426,5 +426,6 @@ MACHINE_START(NET2BIG, "LaCie 2Big Network")
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
 	.fixup		= tag_fixup_mem32,
+	.restart	= orion5x_restart,
 MACHINE_END
 
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index ebd6767..292038f 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -175,4 +175,5 @@ MACHINE_START(RD88F5181L_FXO, "Marvell Orion-VoIP FXO Reference Design")
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
 	.fixup		= tag_fixup_mem32,
+	.restart	= orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index 05db2d3..c44eaba 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -187,4 +187,5 @@ MACHINE_START(RD88F5181L_GE, "Marvell Orion-VoIP GE Reference Design")
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
 	.fixup		= tag_fixup_mem32,
+	.restart	= orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index e47fa05..96438b6 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -311,4 +311,5 @@ MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design")
 	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
+	.restart	= orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
index 6431725..2c5fab0 100644
--- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
@@ -128,4 +128,5 @@ MACHINE_START(RD88F6183AP_GE, "Marvell Orion-1-90 AP GE Reference Design")
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
 	.fixup		= tag_fixup_mem32,
+	.restart	= orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c
index 29f1526..632a861 100644
--- a/arch/arm/mach-orion5x/terastation_pro2-setup.c
+++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -364,4 +364,5 @@ MACHINE_START(TERASTATION_PRO2, "Buffalo Terastation Pro II/Live")
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
 	.fixup		= tag_fixup_mem32,
+	.restart	= orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index 31e51f9..5d64087 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -178,7 +178,7 @@ static struct hw_pci qnap_ts209_pci __initdata = {
 
 static int __init qnap_ts209_pci_init(void)
 {
-	if (machine_is_ts_x09())
+	if (machine_is_ts209())
 		pci_common_init(&qnap_ts209_pci);
 
 	return 0;
@@ -329,4 +329,5 @@ MACHINE_START(TS209, "QNAP TS-109/TS-209")
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
 	.fixup		= tag_fixup_mem32,
+	.restart	= orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index 0fbcc14..4e6ff75 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -318,4 +318,5 @@ MACHINE_START(TS409, "QNAP TS-409")
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
 	.fixup		= tag_fixup_mem32,
+	.restart	= orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index b35e200..c96f374 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -627,4 +627,5 @@ MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC")
 	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
+	.restart	= orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index b8be7d8..078c03f 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -179,4 +179,5 @@ MACHINE_START(WNR854T, "Netgear WNR854T")
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
 	.fixup		= tag_fixup_mem32,
+	.restart	= orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index faf81a0..46a9778 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -267,4 +267,5 @@ MACHINE_START(WRT350N_V2, "Linksys WRT350N v2")
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
 	.fixup		= tag_fixup_mem32,
+	.restart	= orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-picoxcell/common.c b/arch/arm/mach-picoxcell/common.c
index 34d0834..ad871bd 100644
--- a/arch/arm/mach-picoxcell/common.c
+++ b/arch/arm/mach-picoxcell/common.c
@@ -11,6 +11,7 @@
 #include <linux/irqdomain.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 
 #include <asm/mach/arch.h>
@@ -33,22 +34,20 @@ static const char *picoxcell_dt_match[] = {
 };
 
 static const struct of_device_id vic_of_match[] __initconst = {
-	{ .compatible = "arm,pl192-vic" },
+	{ .compatible = "arm,pl192-vic", .data = vic_of_init, },
 	{ /* Sentinel */ }
 };
 
 static void __init picoxcell_init_irq(void)
 {
-	vic_init(IO_ADDRESS(PICOXCELL_VIC0_BASE), 0, ~0, 0);
-	vic_init(IO_ADDRESS(PICOXCELL_VIC1_BASE), 32, ~0, 0);
-	irq_domain_generate_simple(vic_of_match, PICOXCELL_VIC0_BASE, 0);
-	irq_domain_generate_simple(vic_of_match, PICOXCELL_VIC1_BASE, 32);
+	of_irq_init(vic_of_match);
 }
 
 DT_MACHINE_START(PICOXCELL, "Picochip picoXcell")
 	.map_io		= picoxcell_map_io,
 	.nr_irqs	= ARCH_NR_IRQS,
 	.init_irq	= picoxcell_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &picoxcell_timer,
 	.init_machine	= picoxcell_init_machine,
 	.dt_compat	= picoxcell_dt_match,
diff --git a/arch/arm/mach-picoxcell/include/mach/entry-macro.S b/arch/arm/mach-picoxcell/include/mach/entry-macro.S
index a6b09f7..9b505ac 100644
--- a/arch/arm/mach-picoxcell/include/mach/entry-macro.S
+++ b/arch/arm/mach-picoxcell/include/mach/entry-macro.S
@@ -9,11 +9,8 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/map.h>
+	.macro  disable_fiq
+	.endm
 
-#define VA_VIC0		IO_ADDRESS(PICOXCELL_VIC0_BASE)
-#define VA_VIC1		IO_ADDRESS(PICOXCELL_VIC1_BASE)
-
-#include <asm/entry-macro-vic2.S>
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
diff --git a/arch/arm/mach-picoxcell/include/mach/system.h b/arch/arm/mach-picoxcell/include/mach/system.h
index 67c589b..1a5d8cb 100644
--- a/arch/arm/mach-picoxcell/include/mach/system.h
+++ b/arch/arm/mach-picoxcell/include/mach/system.h
@@ -23,9 +23,4 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(int mode, const char *cmd)
-{
-	/* Watchdog reset to go here. */
-}
-
 #endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-picoxcell/include/mach/vmalloc.h b/arch/arm/mach-picoxcell/include/mach/vmalloc.h
deleted file mode 100644
index 0216cc4..0000000
--- a/arch/arm/mach-picoxcell/include/mach/vmalloc.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#define VMALLOC_END	0xfe000000UL
diff --git a/arch/arm/mach-picoxcell/time.c b/arch/arm/mach-picoxcell/time.c
index 90a554f..6c89cf8 100644
--- a/arch/arm/mach-picoxcell/time.c
+++ b/arch/arm/mach-picoxcell/time.c
@@ -11,7 +11,6 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
-#include <linux/sched.h>
 
 #include <asm/mach/time.h>
 #include <asm/sched_clock.h>
@@ -66,21 +65,11 @@ static void picoxcell_add_clocksource(struct device_node *source_timer)
 	dw_apb_clocksource_register(cs);
 }
 
-static DEFINE_CLOCK_DATA(cd);
 static void __iomem *sched_io_base;
 
-unsigned long long notrace sched_clock(void)
+unsigned u32 notrace picoxcell_read_sched_clock(void)
 {
-	cycle_t cyc = sched_io_base ? __raw_readl(sched_io_base) : 0;
-
-	return cyc_to_sched_clock(&cd, cyc, (u32)~0);
-}
-
-static void notrace picoxcell_update_sched_clock(void)
-{
-	cycle_t cyc = sched_io_base ? __raw_readl(sched_io_base) : 0;
-
-	update_sched_clock(&cd, cyc, (u32)~0);
+	return __raw_readl(sched_io_base);
 }
 
 static const struct of_device_id picoxcell_rtc_ids[] __initconst = {
@@ -100,7 +89,7 @@ static void picoxcell_init_sched_clock(void)
 	timer_get_base_and_rate(sched_timer, &sched_io_base, &rate);
 	of_node_put(sched_timer);
 
-	init_sched_clock(&cd, picoxcell_update_sched_clock, 32, rate);
+	setup_sched_clock(picoxcell_read_sched_clock, 32, rate);
 }
 
 static const struct of_device_id picoxcell_timer_ids[] __initconst = {
diff --git a/arch/arm/mach-pnx4008/core.c b/arch/arm/mach-pnx4008/core.c
index cdb95e7..4cfb40b 100644
--- a/arch/arm/mach-pnx4008/core.c
+++ b/arch/arm/mach-pnx4008/core.c
@@ -260,6 +260,11 @@ void __init pnx4008_map_io(void)
 	iotable_init(pnx4008_io_desc, ARRAY_SIZE(pnx4008_io_desc));
 }
 
+static void pnx4008_restart(char mode, const char *cmd)
+{
+	soft_restart(0);
+}
+
 extern struct sys_timer pnx4008_timer;
 
 MACHINE_START(PNX4008, "Philips PNX4008")
@@ -269,4 +274,5 @@ MACHINE_START(PNX4008, "Philips PNX4008")
 	.init_irq 		= pnx4008_init_irq,
 	.init_machine 		= pnx4008_init,
 	.timer 			= &pnx4008_timer,
+	.restart		= pnx4008_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pnx4008/include/mach/system.h b/arch/arm/mach-pnx4008/include/mach/system.h
index 5dda2bb..60cfe71 100644
--- a/arch/arm/mach-pnx4008/include/mach/system.h
+++ b/arch/arm/mach-pnx4008/include/mach/system.h
@@ -21,18 +21,9 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/platform.h>
-
 static void arch_idle(void)
 {
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode, const char *cmd)
-{
-	cpu_reset(0);
-}
-
 #endif
diff --git a/arch/arm/mach-pnx4008/include/mach/vmalloc.h b/arch/arm/mach-pnx4008/include/mach/vmalloc.h
deleted file mode 100644
index 184913c..0000000
--- a/arch/arm/mach-pnx4008/include/mach/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/vmalloc.h
- *
- * Author: Vitaly Wool <source@mvista.com>
- *
- * 2006 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * Just any arbitrary offset to the start of the vmalloc VM area: the
- * current 8MB value just means that there will be a 8MB "hole" after the
- * physical memory until the kernel virtual memory starts.  That means that
- * any out-of-bounds memory accesses will hopefully be caught.
- * The vmalloc() routines leaves a hole of 4kB between each vmalloced
- * area for the same reason. ;)
- */
-#define VMALLOC_END       0xd0000000UL
diff --git a/arch/arm/mach-prima2/common.h b/arch/arm/mach-prima2/common.h
index 83e5d212..b28a930 100644
--- a/arch/arm/mach-prima2/common.h
+++ b/arch/arm/mach-prima2/common.h
@@ -16,6 +16,7 @@ extern struct sys_timer sirfsoc_timer;
 
 extern void __init sirfsoc_of_irq_init(void);
 extern void __init sirfsoc_of_clk_init(void);
+extern void sirfsoc_restart(char, const char *);
 
 #ifndef CONFIG_DEBUG_LL
 static inline void sirfsoc_map_lluart(void)  {}
diff --git a/arch/arm/mach-prima2/include/mach/map.h b/arch/arm/mach-prima2/include/mach/map.h
index 66b1ae2..6f24353 100644
--- a/arch/arm/mach-prima2/include/mach/map.h
+++ b/arch/arm/mach-prima2/include/mach/map.h
@@ -9,8 +9,10 @@
 #ifndef __MACH_PRIMA2_MAP_H__
 #define __MACH_PRIMA2_MAP_H__
 
-#include <mach/vmalloc.h>
+#include <linux/const.h>
 
-#define SIRFSOC_VA(x)			(VMALLOC_END + ((x) & 0x00FFF000))
+#define SIRFSOC_VA_BASE		_AC(0xFEC00000, UL)
+
+#define SIRFSOC_VA(x)		(SIRFSOC_VA_BASE + ((x) & 0x00FFF000))
 
 #endif
diff --git a/arch/arm/mach-prima2/include/mach/system.h b/arch/arm/mach-prima2/include/mach/system.h
index 0dbd257..2c7d2a9 100644
--- a/arch/arm/mach-prima2/include/mach/system.h
+++ b/arch/arm/mach-prima2/include/mach/system.h
@@ -9,21 +9,9 @@
 #ifndef __MACH_SYSTEM_H__
 #define __MACH_SYSTEM_H__
 
-#include <linux/bitops.h>
-#include <mach/hardware.h>
-
-#define SIRFSOC_SYS_RST_BIT  BIT(31)
-
-extern void __iomem *sirfsoc_rstc_base;
-
 static inline void arch_idle(void)
 {
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode, const char *cmd)
-{
-	writel(SIRFSOC_SYS_RST_BIT, sirfsoc_rstc_base);
-}
-
 #endif
diff --git a/arch/arm/mach-prima2/include/mach/vmalloc.h b/arch/arm/mach-prima2/include/mach/vmalloc.h
deleted file mode 100644
index c9f90fe..0000000
--- a/arch/arm/mach-prima2/include/mach/vmalloc.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * arch/arm/ach-prima2/include/mach/vmalloc.h
- *
- * Copyright (c) 2010 – 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef __MACH_VMALLOC_H
-#define __MACH_VMALLOC_H
-
-#include <linux/const.h>
-
-#define VMALLOC_END    _AC(0xFEC00000, UL)
-
-#endif
diff --git a/arch/arm/mach-prima2/pm.c b/arch/arm/mach-prima2/pm.c
index cb53160..26ebb57 100644
--- a/arch/arm/mach-prima2/pm.c
+++ b/arch/arm/mach-prima2/pm.c
@@ -9,6 +9,7 @@
 #include <linux/kernel.h>
 #include <linux/suspend.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
diff --git a/arch/arm/mach-prima2/prima2.c b/arch/arm/mach-prima2/prima2.c
index ef555c0..02b9c05 100644
--- a/arch/arm/mach-prima2/prima2.c
+++ b/arch/arm/mach-prima2/prima2.c
@@ -8,6 +8,7 @@
 
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <asm/sizes.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <linux/of.h>
@@ -39,4 +40,5 @@ MACHINE_START(PRIMA2_EVB, "prima2cb")
 	.dma_zone_size	= SZ_256M,
 	.init_machine	= sirfsoc_mach_init,
 	.dt_compat      = prima2cb_dt_match,
+	.restart	= sirfsoc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-prima2/rstc.c b/arch/arm/mach-prima2/rstc.c
index 492cfa8..762adb7 100644
--- a/arch/arm/mach-prima2/rstc.c
+++ b/arch/arm/mach-prima2/rstc.c
@@ -68,3 +68,10 @@ int sirfsoc_reset_device(struct device *dev)
 
 	return 0;
 }
+
+#define SIRFSOC_SYS_RST_BIT  BIT(31)
+
+void sirfsoc_restart(char mode, const char *cmd)
+{
+	writel(SIRFSOC_SYS_RST_BIT, sirfsoc_rstc_base);
+}
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index fc0b854..82514f5 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -307,7 +307,7 @@ static inline void balloon3_mmc_init(void) {}
 /******************************************************************************
  * USB Gadget
  ******************************************************************************/
-#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
 static void balloon3_udc_command(int cmd)
 {
 	if (cmd == PXA2XX_UDC_CMD_CONNECT)
@@ -829,4 +829,5 @@ MACHINE_START(BALLOON3, "Balloon3")
 	.timer		= &pxa_timer,
 	.init_machine	= balloon3_init,
 	.atag_offset	= 0x100,
+	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c
index 4efc16d..c2f0be0 100644
--- a/arch/arm/mach-pxa/capc7117.c
+++ b/arch/arm/mach-pxa/capc7117.c
@@ -153,5 +153,6 @@ MACHINE_START(CAPC7117,
 	.init_irq = pxa3xx_init_irq,
 	.handle_irq = pxa3xx_handle_irq,
 	.timer = &pxa_timer,
-	.init_machine = capc7117_init
+	.init_machine = capc7117_init,
+	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index f2e4190..ec170a5 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -524,4 +524,5 @@ MACHINE_START(ARMCORE, "Compulab CM-X2XX")
 #ifdef CONFIG_PCI
 	.dma_zone_size	= SZ_64M,
 #endif
+	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index e096bba..7236974 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -858,4 +858,5 @@ MACHINE_START(CM_X300, "CM-X300 module")
 	.timer		= &pxa_timer,
 	.init_machine	= cm_x300_init,
 	.fixup		= cm_x300_fixup,
+	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c
index 80538b8..248804b 100644
--- a/arch/arm/mach-pxa/colibri-pxa270-income.c
+++ b/arch/arm/mach-pxa/colibri-pxa270-income.c
@@ -183,7 +183,7 @@ static inline void income_lcd_init(void) {}
 /******************************************************************************
  * Backlight
  ******************************************************************************/
-#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM__MODULE)
+#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
 static struct platform_pwm_backlight_data income_backlight_data = {
 	.pwm_id		= 0,
 	.max_brightness	= 0x3ff,
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index 05bfa1b..6a68516 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -313,6 +313,7 @@ MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
+	.restart	= pxa_restart,
 MACHINE_END
 
 MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC")
@@ -322,5 +323,6 @@ MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC")
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
+	.restart	= pxa_restart,
 MACHINE_END
 
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index c825e8b..c01059a 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -189,5 +189,6 @@ MACHINE_START(COLIBRI300, "Toradex Colibri PXA300")
 	.init_irq	= pxa3xx_init_irq,
 	.handle_irq	= pxa3xx_handle_irq,
 	.timer		= &pxa_timer,
+	.restart	= pxa_restart,
 MACHINE_END
 
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index 692e1ff..5028f23 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -146,7 +146,7 @@ static void __init colibri_pxa320_init_eth(void)
 static inline void __init colibri_pxa320_init_eth(void) {}
 #endif /* CONFIG_AX88796 */
 
-#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
 static struct gpio_vbus_mach_info colibri_pxa320_gpio_vbus_info = {
 	.gpio_vbus		= mfp_to_gpio(MFP_PIN_GPIO96),
 	.gpio_pullup		= -1,
@@ -259,5 +259,6 @@ MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
 	.init_irq	= pxa3xx_init_irq,
 	.handle_irq	= pxa3xx_handle_irq,
 	.timer		= &pxa_timer,
+	.restart	= pxa_restart,
 MACHINE_END
 
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 549468d..9d4dc59 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -655,7 +655,7 @@ static void corgi_poweroff(void)
 		/* Green LED off tells the bootloader to halt */
 		gpio_set_value(CORGI_GPIO_LED_GREEN, 0);
 
-	arm_machine_restart('h', NULL);
+	pxa_restart('h', NULL);
 }
 
 static void corgi_restart(char mode, const char *cmd)
@@ -664,13 +664,12 @@ static void corgi_restart(char mode, const char *cmd)
 		/* Green LED on tells the bootloader to reboot */
 		gpio_set_value(CORGI_GPIO_LED_GREEN, 1);
 
-	arm_machine_restart('h', cmd);
+	pxa_restart('h', cmd);
 }
 
 static void __init corgi_init(void)
 {
 	pm_power_off = corgi_poweroff;
-	arm_pm_restart = corgi_restart;
 
 	/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
 	PCFR |= PCFR_OPDE;
@@ -726,6 +725,7 @@ MACHINE_START(CORGI, "SHARP Corgi")
 	.handle_irq	= pxa25x_handle_irq,
 	.init_machine	= corgi_init,
 	.timer		= &pxa_timer,
+	.restart	= corgi_restart,
 MACHINE_END
 #endif
 
@@ -737,6 +737,7 @@ MACHINE_START(SHEPHERD, "SHARP Shepherd")
 	.handle_irq	= pxa25x_handle_irq,
 	.init_machine	= corgi_init,
 	.timer		= &pxa_timer,
+	.restart	= corgi_restart,
 MACHINE_END
 #endif
 
@@ -748,6 +749,7 @@ MACHINE_START(HUSKY, "SHARP Husky")
 	.handle_irq	= pxa25x_handle_irq,
 	.init_machine	= corgi_init,
 	.timer		= &pxa_timer,
+	.restart	= corgi_restart,
 MACHINE_END
 #endif
 
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index 5e2cf39..fb5a51d 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -278,4 +278,5 @@ MACHINE_START(CSB726, "Cogent CSB726")
 	.handle_irq       = pxa27x_handle_irq,
 	.init_machine   = csb726_init,
 	.timer          = &pxa_timer,
+	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 94acc0b..bd396ba 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -1305,6 +1305,7 @@ MACHINE_START(EM_X270, "Compulab EM-X270")
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= em_x270_init,
+	.restart	= pxa_restart,
 MACHINE_END
 
 MACHINE_START(EXEDA, "Compulab eXeda")
@@ -1314,4 +1315,5 @@ MACHINE_START(EXEDA, "Compulab eXeda")
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= em_x270_init,
+	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index d82b7aa..69473db 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -196,6 +196,7 @@ MACHINE_START(E330, "Toshiba e330")
 	.fixup		= eseries_fixup,
 	.init_machine	= e330_init,
 	.timer		= &pxa_timer,
+	.restart	= pxa_restart,
 MACHINE_END
 #endif
 
@@ -246,6 +247,7 @@ MACHINE_START(E350, "Toshiba e350")
 	.fixup		= eseries_fixup,
 	.init_machine	= e350_init,
 	.timer		= &pxa_timer,
+	.restart	= pxa_restart,
 MACHINE_END
 #endif
 
@@ -369,6 +371,7 @@ MACHINE_START(E400, "Toshiba e400")
 	.fixup		= eseries_fixup,
 	.init_machine	= e400_init,
 	.timer		= &pxa_timer,
+	.restart	= pxa_restart,
 MACHINE_END
 #endif
 
@@ -558,6 +561,7 @@ MACHINE_START(E740, "Toshiba e740")
 	.fixup		= eseries_fixup,
 	.init_machine	= e740_init,
 	.timer		= &pxa_timer,
+	.restart	= pxa_restart,
 MACHINE_END
 #endif
 
@@ -750,6 +754,7 @@ MACHINE_START(E750, "Toshiba e750")
 	.fixup		= eseries_fixup,
 	.init_machine	= e750_init,
 	.timer		= &pxa_timer,
+	.restart	= pxa_restart,
 MACHINE_END
 #endif
 
@@ -955,5 +960,6 @@ MACHINE_START(E800, "Toshiba e800")
 	.fixup		= eseries_fixup,
 	.init_machine	= e800_init,
 	.timer		= &pxa_timer,
+	.restart	= pxa_restart,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 8308eee..15ab253 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -804,6 +804,7 @@ MACHINE_START(EZX_A780, "Motorola EZX A780")
 	.handle_irq       = pxa27x_handle_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = a780_init,
+	.restart	= pxa_restart,
 MACHINE_END
 #endif
 
@@ -870,6 +871,7 @@ MACHINE_START(EZX_E680, "Motorola EZX E680")
 	.handle_irq       = pxa27x_handle_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = e680_init,
+	.restart	= pxa_restart,
 MACHINE_END
 #endif
 
@@ -936,6 +938,7 @@ MACHINE_START(EZX_A1200, "Motorola EZX A1200")
 	.handle_irq       = pxa27x_handle_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = a1200_init,
+	.restart	= pxa_restart,
 MACHINE_END
 #endif
 
@@ -1127,6 +1130,7 @@ MACHINE_START(EZX_A910, "Motorola EZX A910")
 	.handle_irq       = pxa27x_handle_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = a910_init,
+	.restart	= pxa_restart,
 MACHINE_END
 #endif
 
@@ -1193,6 +1197,7 @@ MACHINE_START(EZX_E6, "Motorola EZX E6")
 	.handle_irq       = pxa27x_handle_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = e6_init,
+	.restart	= pxa_restart,
 MACHINE_END
 #endif
 
@@ -1233,5 +1238,6 @@ MACHINE_START(EZX_E2, "Motorola EZX E2")
 	.handle_irq       = pxa27x_handle_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = e2_init,
+	.restart	= pxa_restart,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 92a2e85..0d729e6 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -57,3 +57,5 @@ void __init pxa_set_ffuart_info(void *info);
 void __init pxa_set_btuart_info(void *info);
 void __init pxa_set_stuart_info(void *info);
 void __init pxa_set_hwuart_info(void *info);
+
+void pxa_restart(char, const char *);
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index 9c8208c..ac3b1ce 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -106,7 +106,7 @@ static void __init gumstix_mmc_init(void)
 }
 #endif
 
-#ifdef CONFIG_USB_GADGET_PXA25X
+#ifdef CONFIG_USB_PXA25X
 static struct gpio_vbus_mach_info gumstix_udc_info = {
 	.gpio_vbus		= GPIO_GUMSTIX_USB_GPIOn,
 	.gpio_pullup		= GPIO_GUMSTIX_USB_GPIOx,
@@ -239,4 +239,5 @@ MACHINE_START(GUMSTIX, "Gumstix")
 	.handle_irq	= pxa25x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= gumstix_init,
+	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c
index 4b5e110..fde6b4c 100644
--- a/arch/arm/mach-pxa/h5000.c
+++ b/arch/arm/mach-pxa/h5000.c
@@ -209,4 +209,5 @@ MACHINE_START(H5400, "HP iPAQ H5000")
 	.handle_irq = pxa25x_handle_irq,
 	.timer = &pxa_timer,
 	.init_machine = h5000_init,
+	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c
index f2c3245..26d069a 100644
--- a/arch/arm/mach-pxa/himalaya.c
+++ b/arch/arm/mach-pxa/himalaya.c
@@ -164,4 +164,5 @@ MACHINE_START(HIMALAYA, "HTC Himalaya")
 	.handle_irq = pxa25x_handle_irq,
 	.init_machine = himalaya_init,
 	.timer = &pxa_timer,
+	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 6f6368e..ce16bda 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -845,4 +845,5 @@ MACHINE_START(H4700, "HP iPAQ HX4700")
 	.handle_irq     = pxa27x_handle_irq,
 	.init_machine = hx4700_init,
 	.timer        = &pxa_timer,
+	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
index f78d5db..e239b82 100644
--- a/arch/arm/mach-pxa/icontrol.c
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -196,5 +196,6 @@ MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM")
 	.init_irq	= pxa3xx_init_irq,
 	.handle_irq	= pxa3xx_handle_irq,
 	.timer		= &pxa_timer,
-	.init_machine	= icontrol_init
+	.init_machine	= icontrol_init,
+	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index ddf20e5..fbabd84 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -199,4 +199,5 @@ MACHINE_START(PXA_IDP, "Vibren PXA255 IDP")
 	.handle_irq	= pxa25x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= idp_init,
+	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/include/mach/entry-macro.S b/arch/arm/mach-pxa/include/mach/entry-macro.S
index a73bc86..260c0c1 100644
--- a/arch/arm/mach-pxa/include/mach/entry-macro.S
+++ b/arch/arm/mach-pxa/include/mach/entry-macro.S
@@ -7,45 +7,9 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-#include <mach/hardware.h>
-#include <mach/irqs.h>
 
 		.macro	disable_fiq
 		.endm
 
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
 		.macro  arch_ret_to_user, tmp1, tmp2
 		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		mrc	p15, 0, \tmp, c0, c0, 0		@ CPUID
-		mov	\tmp, \tmp, lsr #13
-		and	\tmp, \tmp, #0x7		@ Core G
-		cmp	\tmp, #1
-		bhi	1002f
-
-		@ Core Generation 1 (PXA25x)
-		mov	\base, #io_p2v(0x40000000)	@ IIR Ctl = 0x40d00000
-		add	\base, \base, #0x00d00000
-		ldr	\irqstat, [\base, #0]		@ ICIP
-		ldr	\irqnr, [\base, #4]		@ ICMR
-
-		ands	\irqnr, \irqstat, \irqnr
-		beq	1001f
-		rsb	\irqstat, \irqnr, #0
-		and	\irqstat, \irqstat, \irqnr
-		clz	\irqnr, \irqstat
-		rsb	\irqnr, \irqnr, #(31 + PXA_IRQ(0))
-		b	1001f
-1002:
-		@ Core Generation 2 (PXA27x) or Core Generation 3 (PXA3xx)
-		mrc	p6, 0, \irqstat, c5, c0, 0	@ ICHP
-		tst	\irqstat, #0x80000000
-		beq	1001f
-		bic	\irqstat, \irqstat, #0x80000000
-		mov	\irqnr, \irqstat, lsr #16
-		add	\irqnr, \irqnr, #(PXA_IRQ(0))
-1001:
-		.endm
diff --git a/arch/arm/mach-pxa/include/mach/palm27x.h b/arch/arm/mach-pxa/include/mach/palm27x.h
index f80bbe2..d4eac3d 100644
--- a/arch/arm/mach-pxa/include/mach/palm27x.h
+++ b/arch/arm/mach-pxa/include/mach/palm27x.h
@@ -37,8 +37,8 @@ extern void __init palm27x_lcd_init(int power,
 #define palm27x_lcd_init(power, mode)	do {} while (0)
 #endif
 
-#if	defined(CONFIG_USB_GADGET_PXA27X) || \
-	defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+#if	defined(CONFIG_USB_PXA27X) || \
+	defined(CONFIG_USB_PXA27X_MODULE)
 extern void __init palm27x_udc_init(int vbus, int pullup,
 					int vbus_inverted);
 #else
diff --git a/arch/arm/mach-pxa/include/mach/system.h b/arch/arm/mach-pxa/include/mach/system.h
index d1fce8b..c5afacd 100644
--- a/arch/arm/mach-pxa/include/mach/system.h
+++ b/arch/arm/mach-pxa/include/mach/system.h
@@ -9,15 +9,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
-#include <asm/proc-fns.h>
-#include "hardware.h"
-#include "pxa2xx-regs.h"
-
 static inline void arch_idle(void)
 {
 	cpu_do_idle();
 }
-
-
-void arch_reset(char mode, const char *cmd);
diff --git a/arch/arm/mach-pxa/include/mach/vmalloc.h b/arch/arm/mach-pxa/include/mach/vmalloc.h
deleted file mode 100644
index bfecfbf..0000000
--- a/arch/arm/mach-pxa/include/mach/vmalloc.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/vmalloc.h
- *
- * Author:	Nicolas Pitre
- * Copyright:	(C) 2001 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define VMALLOC_END       (0xe8000000UL)
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 7b324ec..c337c7e 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -445,4 +445,5 @@ MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleto
 	.handle_irq	= pxa3xx_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= littleton_init,
+	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 1dd5302..6119c01 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -505,4 +505,5 @@ MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine")
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= lpd270_init,
+	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index c48ce6d..4b7a528 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -556,4 +556,5 @@ MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
 	.handle_irq	= pxa25x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= lubbock_init,
+	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 4b796c3..4e6774f 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -760,4 +760,5 @@ MACHINE_START(MAGICIAN, "HTC Magician")
 	.handle_irq = pxa27x_handle_irq,
 	.init_machine = magician_init,
 	.timer = &pxa_timer,
+	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 0567d39..ca14555 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -622,4 +622,5 @@ MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= mainstone_init,
+	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index b938fc2..924a3b5 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -696,13 +696,13 @@ static void mioa701_machine_exit(void);
 static void mioa701_poweroff(void)
 {
 	mioa701_machine_exit();
-	arm_machine_restart('s', NULL);
+	pxa_restart('s', NULL);
 }
 
 static void mioa701_restart(char c, const char *cmd)
 {
 	mioa701_machine_exit();
-	arm_machine_restart('s', cmd);
+	pxa_restart('s', cmd);
 }
 
 static struct gpio global_gpios[] = {
@@ -734,7 +734,6 @@ static void __init mioa701_machine_init(void)
 	pxa_set_udc_info(&mioa701_udc_info);
 	pxa_set_ac97_info(&mioa701_ac97_info);
 	pm_power_off = mioa701_poweroff;
-	arm_pm_restart = mioa701_restart;
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	gsm_init();
 
@@ -752,9 +751,11 @@ static void mioa701_machine_exit(void)
 
 MACHINE_START(MIOA701, "MIO A701")
 	.atag_offset	= 0x100,
+	.restart_mode	= 's',
 	.map_io		= &pxa27x_map_io,
 	.init_irq	= &pxa27x_init_irq,
 	.handle_irq	= &pxa27x_handle_irq,
 	.init_machine	= mioa701_machine_init,
 	.timer		= &pxa_timer,
+	.restart	= mioa701_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c
index 4af5d51..169bf8f 100644
--- a/arch/arm/mach-pxa/mp900.c
+++ b/arch/arm/mach-pxa/mp900.c
@@ -98,5 +98,6 @@ MACHINE_START(NEC_MP900, "MobilePro900/C")
 	.init_irq	= pxa25x_init_irq,
 	.handle_irq	= pxa25x_handle_irq,
 	.init_machine	= mp900c_init,
+	.restart	= pxa_restart,
 MACHINE_END
 
diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c
index 325c245..fbc10d7 100644
--- a/arch/arm/mach-pxa/palm27x.c
+++ b/arch/arm/mach-pxa/palm27x.c
@@ -164,8 +164,8 @@ void __init palm27x_lcd_init(int power, struct pxafb_mode_info *mode)
 /******************************************************************************
  * USB Gadget
  ******************************************************************************/
-#if	defined(CONFIG_USB_GADGET_PXA27X) || \
-	defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+#if	defined(CONFIG_USB_PXA27X) || \
+	defined(CONFIG_USB_PXA27X_MODULE)
 static struct gpio_vbus_mach_info palm27x_udc_info = {
 	.gpio_vbus_inverted	= 1,
 };
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 3d4a281..1fa80f4f 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -347,5 +347,6 @@ MACHINE_START(PALMLD, "Palm LifeDrive")
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
-	.init_machine	= palmld_init
+	.init_machine	= palmld_init,
+	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 99d6bcf..5ba1431 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -208,5 +208,6 @@ MACHINE_START(PALMT5, "Palm Tungsten|T5")
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
-	.init_machine	= palmt5_init
+	.init_machine	= palmt5_init,
+	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index 6ec7cae..29b51b4 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -338,7 +338,7 @@ static inline void palmtc_mkp_init(void) {}
 /******************************************************************************
  * UDC
  ******************************************************************************/
-#if defined(CONFIG_USB_GADGET_PXA25X)||defined(CONFIG_USB_GADGET_PXA25X_MODULE)
+#if defined(CONFIG_USB_PXA25X)||defined(CONFIG_USB_PXA25X_MODULE)
 static struct gpio_vbus_mach_info palmtc_udc_info = {
 	.gpio_vbus		= GPIO_NR_PALMTC_USB_DETECT_N,
 	.gpio_vbus_inverted	= 1,
@@ -542,5 +542,6 @@ MACHINE_START(PALMTC, "Palm Tungsten|C")
 	.init_irq	= pxa25x_init_irq,
 	.handle_irq	= pxa25x_handle_irq,
 	.timer		= &pxa_timer,
-	.init_machine	= palmtc_init
+	.init_machine	= palmtc_init,
+	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 9376da0..5ebf49acb 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -361,5 +361,6 @@ MACHINE_START(PALMTE2, "Palm Tungsten|E2")
 	.init_irq	= pxa25x_init_irq,
 	.handle_irq	= pxa25x_handle_irq,
 	.timer		= &pxa_timer,
-	.init_machine	= palmte2_init
+	.init_machine	= palmte2_init,
+	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index 94e9708..ec82491 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -452,6 +452,7 @@ MACHINE_START(TREO680, "Palm Treo 680")
 	.handle_irq       = pxa27x_handle_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = treo680_init,
+	.restart	= pxa_restart,
 MACHINE_END
 #endif
 
@@ -464,5 +465,6 @@ MACHINE_START(CENTRO, "Palm Centro 685")
 	.handle_irq       = pxa27x_handle_irq,
 	.timer          = &pxa_timer,
 	.init_machine	= centro_init,
+	.restart	= pxa_restart,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 4e3e459..6170d76 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -369,5 +369,6 @@ MACHINE_START(PALMTX, "Palm T|X")
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
-	.init_machine	= palmtx_init
+	.init_machine	= palmtx_init,
+	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 68e18ba..b2dff9d 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -404,5 +404,6 @@ MACHINE_START(PALMZ72, "Palm Zire72")
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
-	.init_machine	= palmz72_init
+	.init_machine	= palmz72_init,
+	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index 0b825a3..fe90544 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -265,4 +265,5 @@ MACHINE_START(PCM027, "Phytec Messtechnik GmbH phyCORE-PXA270")
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= pcm027_init,
+	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 50c8331..b260ce8 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -417,12 +417,7 @@ static struct i2c_board_info __initdata poodle_i2c_devices[] = {
 
 static void poodle_poweroff(void)
 {
-	arm_machine_restart('h', NULL);
-}
-
-static void poodle_restart(char mode, const char *cmd)
-{
-	arm_machine_restart('h', cmd);
+	pxa_restart('h', NULL);
 }
 
 static void __init poodle_init(void)
@@ -430,7 +425,6 @@ static void __init poodle_init(void)
 	int ret = 0;
 
 	pm_power_off = poodle_poweroff;
-	arm_pm_restart = poodle_restart;
 
 	PCFR |= PCFR_OPDE;
 
@@ -472,4 +466,5 @@ MACHINE_START(POODLE, "SHARP Poodle")
 	.handle_irq	= pxa25x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= poodle_init,
+	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index f0c05f4..4962b16 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -1093,6 +1093,7 @@ MACHINE_START(RAUMFELD_RC, "Raumfeld Controller")
 	.init_irq	= pxa3xx_init_irq,
 	.handle_irq	= pxa3xx_handle_irq,
 	.timer		= &pxa_timer,
+	.restart	= pxa_restart,
 MACHINE_END
 #endif
 
@@ -1104,6 +1105,7 @@ MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector")
 	.init_irq	= pxa3xx_init_irq,
 	.handle_irq	= pxa3xx_handle_irq,
 	.timer		= &pxa_timer,
+	.restart	= pxa_restart,
 MACHINE_END
 #endif
 
@@ -1115,5 +1117,6 @@ MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker")
 	.init_irq	= pxa3xx_init_irq,
 	.handle_irq	= pxa3xx_handle_irq,
 	.timer		= &pxa_timer,
+	.restart	= pxa_restart,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c
index 01e9d64..c8497b0 100644
--- a/arch/arm/mach-pxa/reset.c
+++ b/arch/arm/mach-pxa/reset.c
@@ -81,14 +81,17 @@ static void do_hw_reset(void)
 	OSMR3 = OSCR + 368640;	/* ... in 100 ms */
 }
 
-void arch_reset(char mode, const char *cmd)
+void pxa_restart(char mode, const char *cmd)
 {
+	local_irq_disable();
+	local_fiq_disable();
+
 	clear_reset_status(RESET_STATUS_ALL);
 
 	switch (mode) {
 	case 's':
 		/* Jump into ROM at address 0 */
-		cpu_reset(0);
+		soft_restart(0);
 		break;
 	case 'g':
 		do_gpio_reset();
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index fc2c1e0..8787070 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -602,4 +602,5 @@ MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)")
 	.handle_irq       = pxa3xx_handle_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = saar_init,
+	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c
index 3e999e3..b6dbaca 100644
--- a/arch/arm/mach-pxa/saarb.c
+++ b/arch/arm/mach-pxa/saarb.c
@@ -111,5 +111,6 @@ MACHINE_START(SAARB, "PXA955 Handheld Platform (aka SAARB)")
 	.handle_irq	= pxa3xx_handle_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = saarb_init,
+	.restart	= pxa_restart,
 MACHINE_END
 
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 953a919..a7f81a3 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -926,7 +926,7 @@ static inline void spitz_i2c_init(void) {}
  ******************************************************************************/
 static void spitz_poweroff(void)
 {
-	arm_machine_restart('g', NULL);
+	pxa_restart('g', NULL);
 }
 
 static void spitz_restart(char mode, const char *cmd)
@@ -943,7 +943,6 @@ static void __init spitz_init(void)
 {
 	init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0);
 	pm_power_off = spitz_poweroff;
-	arm_pm_restart = spitz_restart;
 
 	PMCR = 0x00;
 
@@ -982,33 +981,39 @@ static void __init spitz_fixup(struct tag *tags, char **cmdline,
 
 #ifdef CONFIG_MACH_SPITZ
 MACHINE_START(SPITZ, "SHARP Spitz")
+	.restart_mode	= 'g',
 	.fixup		= spitz_fixup,
 	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
 	.init_machine	= spitz_init,
 	.timer		= &pxa_timer,
+	.restart	= spitz_restart,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_BORZOI
 MACHINE_START(BORZOI, "SHARP Borzoi")
+	.restart_mode	= 'g',
 	.fixup		= spitz_fixup,
 	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
 	.init_machine	= spitz_init,
 	.timer		= &pxa_timer,
+	.restart	= spitz_restart,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_AKITA
 MACHINE_START(AKITA, "SHARP Akita")
+	.restart_mode	= 'g',
 	.fixup		= spitz_fixup,
 	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
 	.init_machine	= spitz_init,
 	.timer		= &pxa_timer,
+	.restart	= spitz_restart,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 4c9a48b..80d7f23 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -1005,6 +1005,7 @@ MACHINE_START(INTELMOTE2, "IMOTE 2")
 	.timer		= &pxa_timer,
 	.init_machine	= imote2_init,
 	.atag_offset	= 0x100,
+	.restart	= pxa_restart,
 MACHINE_END
 #endif
 
@@ -1017,5 +1018,6 @@ MACHINE_START(STARGATE2, "Stargate 2")
 	.timer = &pxa_timer,
 	.init_machine = stargate2_init,
 	.atag_offset = 0x100,
+	.restart	= pxa_restart,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index ad47bb9..4fa36a3 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -495,4 +495,5 @@ MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)")
 	.handle_irq       = pxa3xx_handle_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = tavorevb_init,
+	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/tavorevb3.c b/arch/arm/mach-pxa/tavorevb3.c
index fd56916..8a22879 100644
--- a/arch/arm/mach-pxa/tavorevb3.c
+++ b/arch/arm/mach-pxa/tavorevb3.c
@@ -132,4 +132,5 @@ MACHINE_START(TAVOREVB3, "PXA950 Evaluation Board (aka TavorEVB3)")
 	.handle_irq       = pxa3xx_handle_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = evb3_init,
+	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index de68470..b503049 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -16,7 +16,6 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/clockchips.h>
-#include <linux/sched.h>
 
 #include <asm/div64.h>
 #include <asm/mach/irq.h>
@@ -32,18 +31,10 @@
  * long as there is always less than 582 seconds between successive
  * calls to sched_clock() which should always be the case in practice.
  */
-static DEFINE_CLOCK_DATA(cd);
 
-unsigned long long notrace sched_clock(void)
+static u32 notrace pxa_read_sched_clock(void)
 {
-	u32 cyc = OSCR;
-	return cyc_to_sched_clock(&cd, cyc, (u32)~0);
-}
-
-static void notrace pxa_update_sched_clock(void)
-{
-	u32 cyc = OSCR;
-	update_sched_clock(&cd, cyc, (u32)~0);
+	return OSCR;
 }
 
 
@@ -119,7 +110,7 @@ static void __init pxa_timer_init(void)
 	OIER = 0;
 	OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3;
 
-	init_sched_clock(&cd, pxa_update_sched_clock, 32, clock_tick_rate);
+	setup_sched_clock(pxa_read_sched_clock, 32, clock_tick_rate);
 
 	clockevents_calc_mult_shift(&ckevt_pxa_osmr0, clock_tick_rate, 4);
 	ckevt_pxa_osmr0.max_delta_ns =
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 402b0c9..dfe40f8 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -905,7 +905,7 @@ static struct platform_device *devices[] __initdata = {
 
 static void tosa_poweroff(void)
 {
-	arm_machine_restart('g', NULL);
+	pxa_restart('g', NULL);
 }
 
 static void tosa_restart(char mode, const char *cmd)
@@ -935,7 +935,6 @@ static void __init tosa_init(void)
 	init_gpio_reset(TOSA_GPIO_ON_RESET, 0, 0);
 
 	pm_power_off = tosa_poweroff;
-	arm_pm_restart = tosa_restart;
 
 	PCFR |= PCFR_OPDE;
 
@@ -970,6 +969,7 @@ static void __init fixup_tosa(struct tag *tags, char **cmdline,
 }
 
 MACHINE_START(TOSA, "SHARP Tosa")
+	.restart_mode	= 'g',
 	.fixup          = fixup_tosa,
 	.map_io         = pxa25x_map_io,
 	.nr_irqs	= TOSA_NR_IRQS,
@@ -977,4 +977,5 @@ MACHINE_START(TOSA, "SHARP Tosa")
 	.handle_irq       = pxa25x_handle_irq,
 	.init_machine   = tosa_init,
 	.timer          = &pxa_timer,
+	.restart	= tosa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 1aaed2b..0f30af6 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -561,6 +561,7 @@ MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
+	.restart	= pxa_restart,
 MACHINE_END
 
 MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module")
@@ -571,4 +572,5 @@ MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module")
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
+	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 242ddae..afe2b74 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -998,4 +998,5 @@ MACHINE_START(VIPER, "Arcom/Eurotech VIPER SBC")
 	.handle_irq	= pxa25x_handle_irq,
 	.timer          = &pxa_timer,
 	.init_machine	= viper_init,
+	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index a7539a6..fed5fb0 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -343,7 +343,7 @@ static inline void vpac270_uhc_init(void) {}
 /******************************************************************************
  * USB Gadget
  ******************************************************************************/
-#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
 static struct gpio_vbus_mach_info vpac270_gpio_vbus_info = {
 	.gpio_vbus		= GPIO41_VPAC270_UDC_DETECT,
 	.gpio_pullup		= -1,
@@ -721,5 +721,6 @@ MACHINE_START(VPAC270, "Voipac PXA270")
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
-	.init_machine	= vpac270_init
+	.init_machine	= vpac270_init,
+	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c
index 70e1730..4bbe9a3 100644
--- a/arch/arm/mach-pxa/xcep.c
+++ b/arch/arm/mach-pxa/xcep.c
@@ -185,5 +185,6 @@ MACHINE_START(XCEP, "Iskratel XCEP")
 	.init_irq	= pxa25x_init_irq,
 	.handle_irq	= pxa25x_handle_irq,
 	.timer		= &pxa_timer,
+	.restart	= pxa_restart,
 MACHINE_END
 
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index ead32c9..d75f66a 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -725,4 +725,5 @@ MACHINE_START(ZIPIT2, "Zipit Z2")
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= z2_init,
+	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 498b83b..9db35a7 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -911,5 +911,6 @@ MACHINE_START(ARCOM_ZEUS, "Arcom/Eurotech ZEUS")
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= zeus_init,
+	.restart	= pxa_restart,
 MACHINE_END
 
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 6c39c33..7678b1b 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -430,4 +430,5 @@ MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
 	.handle_irq	= pxa3xx_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= zylonite_init,
+	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index dba6d0c..c593be4 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -12,6 +12,8 @@ config REALVIEW_EB_A9MP
 	bool "Support Multicore Cortex-A9 Tile"
 	depends on MACH_REALVIEW_EB
 	select CPU_V7
+	select HAVE_SMP
+	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  Enable support for the Cortex-A9MPCore tile fitted to the
 	  Realview(R) Emulation Baseboard platform.
@@ -21,6 +23,8 @@ config REALVIEW_EB_ARM11MP
 	depends on MACH_REALVIEW_EB
 	select CPU_V6K
 	select ARCH_HAS_BARRIERS if SMP
+	select HAVE_SMP
+	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  Enable support for the ARM11MPCore tile fitted to the Realview(R)
 	  Emulation Baseboard platform.
@@ -39,6 +43,8 @@ config MACH_REALVIEW_PB11MP
 	select CPU_V6K
 	select ARM_GIC
 	select HAVE_PATA_PLATFORM
+	select HAVE_SMP
+	select MIGHT_HAVE_CACHE_L2X0
 	select ARCH_HAS_BARRIERS if SMP
 	help
 	  Include support for the ARM(R) RealView(R) Platform Baseboard for
@@ -51,6 +57,7 @@ config MACH_REALVIEW_PB1176
 	select CPU_V6
 	select ARM_GIC
 	select HAVE_TCM
+	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  Include support for the ARM(R) RealView(R) Platform Baseboard for
 	  ARM1176JZF-S.
@@ -78,6 +85,8 @@ config MACH_REALVIEW_PBX
 	bool "Support RealView(R) Platform Baseboard Explore"
 	select ARM_GIC
 	select HAVE_PATA_PLATFORM
+	select HAVE_SMP
+	select MIGHT_HAVE_CACHE_L2X0
 	select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET
 	select ZONE_DMA if SPARSEMEM
 	help
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index d5ed5d4..acd329a 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -21,7 +21,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/interrupt.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 47259c8..735b57a 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -65,6 +65,5 @@ extern int realview_usb_register(struct resource *res);
 extern void realview_init_early(void);
 extern void realview_fixup(struct tag *tags, char **from,
 			   struct meminfo *meminfo);
-extern void (*realview_reset)(char);
 
 #endif
diff --git a/arch/arm/mach-realview/include/mach/entry-macro.S b/arch/arm/mach-realview/include/mach/entry-macro.S
index 4071164..e8a5179 100644
--- a/arch/arm/mach-realview/include/mach/entry-macro.S
+++ b/arch/arm/mach-realview/include/mach/entry-macro.S
@@ -7,8 +7,6 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-#include <mach/hardware.h>
-#include <asm/hardware/entry-macro-gic.S>
 
 		.macro	disable_fiq
 		.endm
diff --git a/arch/arm/mach-realview/include/mach/system.h b/arch/arm/mach-realview/include/mach/system.h
index 6657ff23..471b671 100644
--- a/arch/arm/mach-realview/include/mach/system.h
+++ b/arch/arm/mach-realview/include/mach/system.h
@@ -21,12 +21,6 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/platform.h>
-
-void (*realview_reset)(char mode);
-
 static inline void arch_idle(void)
 {
 	/*
@@ -36,15 +30,4 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode, const char *cmd)
-{
-	/*
-	 * To reset, we hit the on-board reset register
-	 * in the system FPGA
-	 */
-	if (realview_reset)
-		realview_reset(mode);
-	dsb();
-}
-
 #endif
diff --git a/arch/arm/mach-realview/include/mach/vmalloc.h b/arch/arm/mach-realview/include/mach/vmalloc.h
deleted file mode 100644
index a2a4c68..0000000
--- a/arch/arm/mach-realview/include/mach/vmalloc.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  arch/arm/mach-realview/include/mach/vmalloc.h
- *
- *  Copyright (C) 2003 ARM Limited
- *  Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define VMALLOC_END		0xf8000000UL
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 026c66a..0069561 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -21,7 +21,7 @@
 
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
 #include <linux/amba/mmci.h>
@@ -91,8 +91,8 @@ static struct map_desc realview_eb_io_desc[] __initdata = {
 
 static struct map_desc realview_eb11mp_io_desc[] __initdata = {
 	{
-		.virtual	= IO_ADDRESS(REALVIEW_EB11MP_GIC_CPU_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_EB11MP_GIC_CPU_BASE),
+		.virtual	= IO_ADDRESS(REALVIEW_EB11MP_SCU_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_EB11MP_SCU_BASE),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	}, {
@@ -415,7 +415,7 @@ static struct sys_timer realview_eb_timer = {
 	.init		= realview_eb_timer_init,
 };
 
-static void realview_eb_reset(char mode)
+static void realview_eb_restart(char mode, const char *cmd)
 {
 	void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
 	void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
@@ -427,6 +427,7 @@ static void realview_eb_reset(char mode)
 	__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
 	if (core_tile_eb11mp())
 		__raw_writel(0x0008, reset_ctrl);
+	dsb();
 }
 
 static void __init realview_eb_init(void)
@@ -458,7 +459,6 @@ static void __init realview_eb_init(void)
 #ifdef CONFIG_LEDS
 	leds_event = realview_leds_event;
 #endif
-	realview_reset = realview_eb_reset;
 }
 
 MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
@@ -469,8 +469,10 @@ MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
 	.init_early	= realview_init_early,
 	.init_irq	= gic_init_irq,
 	.timer		= &realview_eb_timer,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= realview_eb_init,
 #ifdef CONFIG_ZONE_DMA
 	.dma_zone_size	= SZ_256M,
 #endif
+	.restart	= realview_eb_restart,
 MACHINE_END
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index c057540..8fe3955 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -21,7 +21,7 @@
 
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
 #include <linux/amba/mmci.h>
@@ -336,12 +336,13 @@ static struct sys_timer realview_pb1176_timer = {
 	.init		= realview_pb1176_timer_init,
 };
 
-static void realview_pb1176_reset(char mode)
+static void realview_pb1176_restart(char mode, const char *cmd)
 {
 	void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
 	void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
 	__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
 	__raw_writel(REALVIEW_PB1176_SYS_SOFT_RESET, reset_ctrl);
+	dsb();
 }
 
 static void realview_pb1176_fixup(struct tag *tags, char **from,
@@ -381,7 +382,6 @@ static void __init realview_pb1176_init(void)
 #ifdef CONFIG_LEDS
 	leds_event = realview_leds_event;
 #endif
-	realview_reset = realview_pb1176_reset;
 }
 
 MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
@@ -392,8 +392,10 @@ MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
 	.init_early	= realview_init_early,
 	.init_irq	= gic_init_irq,
 	.timer		= &realview_pb1176_timer,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= realview_pb1176_init,
 #ifdef CONFIG_ZONE_DMA
 	.dma_zone_size	= SZ_256M,
 #endif
+	.restart	= realview_pb1176_restart,
 MACHINE_END
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index 671ad6d..34a2601 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -21,7 +21,7 @@
 
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
 #include <linux/amba/mmci.h>
@@ -315,7 +315,7 @@ static struct sys_timer realview_pb11mp_timer = {
 	.init		= realview_pb11mp_timer_init,
 };
 
-static void realview_pb11mp_reset(char mode)
+static void realview_pb11mp_restart(char mode, const char *cmd)
 {
 	void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
 	void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
@@ -327,6 +327,7 @@ static void realview_pb11mp_reset(char mode)
 	__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
 	__raw_writel(0x0000, reset_ctrl);
 	__raw_writel(0x0004, reset_ctrl);
+	dsb();
 }
 
 static void __init realview_pb11mp_init(void)
@@ -355,7 +356,6 @@ static void __init realview_pb11mp_init(void)
 #ifdef CONFIG_LEDS
 	leds_event = realview_leds_event;
 #endif
-	realview_reset = realview_pb11mp_reset;
 }
 
 MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
@@ -366,8 +366,10 @@ MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
 	.init_early	= realview_init_early,
 	.init_irq	= gic_init_irq,
 	.timer		= &realview_pb11mp_timer,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= realview_pb11mp_init,
 #ifdef CONFIG_ZONE_DMA
 	.dma_zone_size	= SZ_256M,
 #endif
+	.restart	= realview_pb11mp_restart,
 MACHINE_END
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index cbf22df..d26a6de 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -21,7 +21,7 @@
 
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
 #include <linux/amba/mmci.h>
@@ -271,7 +271,7 @@ static struct sys_timer realview_pba8_timer = {
 	.init		= realview_pba8_timer_init,
 };
 
-static void realview_pba8_reset(char mode)
+static void realview_pba8_restart(char mode, const char *cmd)
 {
 	void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
 	void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
@@ -283,6 +283,7 @@ static void realview_pba8_reset(char mode)
 	__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
 	__raw_writel(0x0000, reset_ctrl);
 	__raw_writel(0x0004, reset_ctrl);
+	dsb();
 }
 
 static void __init realview_pba8_init(void)
@@ -305,7 +306,6 @@ static void __init realview_pba8_init(void)
 #ifdef CONFIG_LEDS
 	leds_event = realview_leds_event;
 #endif
-	realview_reset = realview_pba8_reset;
 }
 
 MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
@@ -316,8 +316,10 @@ MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
 	.init_early	= realview_init_early,
 	.init_irq	= gic_init_irq,
 	.timer		= &realview_pba8_timer,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= realview_pba8_init,
 #ifdef CONFIG_ZONE_DMA
 	.dma_zone_size	= SZ_256M,
 #endif
+	.restart	= realview_pba8_restart,
 MACHINE_END
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index 63c4114..a250fb4 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -20,7 +20,7 @@
 
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
 #include <linux/amba/mmci.h>
@@ -98,8 +98,8 @@ static struct map_desc realview_pbx_io_desc[] __initdata = {
 
 static struct map_desc realview_local_io_desc[] __initdata = {
 	{
-		.virtual        = IO_ADDRESS(REALVIEW_PBX_TILE_GIC_CPU_BASE),
-		.pfn            = __phys_to_pfn(REALVIEW_PBX_TILE_GIC_CPU_BASE),
+		.virtual        = IO_ADDRESS(REALVIEW_PBX_TILE_SCU_BASE),
+		.pfn            = __phys_to_pfn(REALVIEW_PBX_TILE_SCU_BASE),
 		.length         = SZ_4K,
 		.type           = MT_DEVICE,
 	}, {
@@ -339,7 +339,7 @@ static void realview_pbx_fixup(struct tag *tags, char **from,
 #endif
 }
 
-static void realview_pbx_reset(char mode)
+static void realview_pbx_restart(char mode, const char *cmd)
 {
 	void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
 	void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
@@ -351,6 +351,7 @@ static void realview_pbx_reset(char mode)
 	__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
 	__raw_writel(0x00F0, reset_ctrl);
 	__raw_writel(0x00F4, reset_ctrl);
+	dsb();
 }
 
 static void __init realview_pbx_init(void)
@@ -388,7 +389,6 @@ static void __init realview_pbx_init(void)
 #ifdef CONFIG_LEDS
 	leds_event = realview_leds_event;
 #endif
-	realview_reset = realview_pbx_reset;
 }
 
 MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
@@ -399,8 +399,10 @@ MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
 	.init_early	= realview_init_early,
 	.init_irq	= gic_init_irq,
 	.timer		= &realview_pbx_timer,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= realview_pbx_init,
 #ifdef CONFIG_ZONE_DMA
 	.dma_zone_size	= SZ_256M,
 #endif
+	.restart	= realview_pbx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-rpc/include/mach/system.h b/arch/arm/mach-rpc/include/mach/system.h
index 45c7b93..359bab9 100644
--- a/arch/arm/mach-rpc/include/mach/system.h
+++ b/arch/arm/mach-rpc/include/mach/system.h
@@ -7,21 +7,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/hardware/iomd.h>
-
 static inline void arch_idle(void)
 {
 	cpu_do_idle();
 }
-
-static inline void arch_reset(char mode, const char *cmd)
-{
-	iomd_writeb(0, IOMD_ROMCR0);
-
-	/*
-	 * Jump into the ROM
-	 */
-	cpu_reset(0);
-}
diff --git a/arch/arm/mach-rpc/include/mach/vmalloc.h b/arch/arm/mach-rpc/include/mach/vmalloc.h
deleted file mode 100644
index fb70022..0000000
--- a/arch/arm/mach-rpc/include/mach/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- *  arch/arm/mach-rpc/include/mach/vmalloc.h
- *
- *  Copyright (C) 1997 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define VMALLOC_END       0xdc000000UL
diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c
index 8559598..3d44a59 100644
--- a/arch/arm/mach-rpc/riscpc.c
+++ b/arch/arm/mach-rpc/riscpc.c
@@ -24,6 +24,7 @@
 #include <asm/elf.h>
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
+#include <asm/hardware/iomd.h>
 #include <asm/page.h>
 #include <asm/domain.h>
 #include <asm/setup.h>
@@ -214,6 +215,16 @@ static int __init rpc_init(void)
 
 arch_initcall(rpc_init);
 
+static void rpc_restart(char mode, const char *cmd)
+{
+	iomd_writeb(0, IOMD_ROMCR0);
+
+	/*
+	 * Jump into the ROM
+	 */
+	soft_restart(0);
+}
+
 extern struct sys_timer ioc_timer;
 
 MACHINE_START(RISCPC, "Acorn-RiscPC")
@@ -224,4 +235,5 @@ MACHINE_START(RISCPC, "Acorn-RiscPC")
 	.map_io		= rpc_map_io,
 	.init_irq	= rpc_init_irq,
 	.timer		= &ioc_timer,
+	.restart	= rpc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c
index bc53d2d..ac7b2ad 100644
--- a/arch/arm/mach-s3c2410/bast-irq.c
+++ b/arch/arm/mach-s3c2410/bast-irq.c
@@ -24,7 +24,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/ioport.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/io.h>
 
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-s3c2410/common.h b/arch/arm/mach-s3c2410/common.h
new file mode 100644
index 0000000..f65dc80
--- /dev/null
+++ b/arch/arm/mach-s3c2410/common.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Common Header for S3C2410 machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_S3C2410_COMMON_H
+#define __ARCH_ARM_MACH_S3C2410_COMMON_H
+
+void s3c2410_restart(char mode, const char *cmd);
+
+#endif /* __ARCH_ARM_MACH_S3C2410_COMMON_H */
diff --git a/arch/arm/mach-s3c2410/cpu-freq.c b/arch/arm/mach-s3c2410/cpu-freq.c
index 75189df..7dc6c46 100644
--- a/arch/arm/mach-s3c2410/cpu-freq.c
+++ b/arch/arm/mach-s3c2410/cpu-freq.c
@@ -16,7 +16,7 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/cpufreq.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
@@ -115,24 +115,25 @@ static struct s3c_cpufreq_info s3c2410_cpufreq_info = {
 	.debug_io_show	= s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
 };
 
-static int s3c2410_cpufreq_add(struct sys_device *sysdev)
+static int s3c2410_cpufreq_add(struct device *dev)
 {
 	return s3c_cpufreq_register(&s3c2410_cpufreq_info);
 }
 
-static struct sysdev_driver s3c2410_cpufreq_driver = {
-	.add		= s3c2410_cpufreq_add,
+static struct subsys_interface s3c2410_cpufreq_interface = {
+	.name		= "s3c2410_cpufreq",
+	.subsys		= &s3c2410_subsys,
+	.add_dev	= s3c2410_cpufreq_add,
 };
 
 static int __init s3c2410_cpufreq_init(void)
 {
-	return sysdev_driver_register(&s3c2410_sysclass,
-				      &s3c2410_cpufreq_driver);
+	return subsys_interface_register(&s3c2410_cpufreq_interface);
 }
 
 arch_initcall(s3c2410_cpufreq_init);
 
-static int s3c2410a_cpufreq_add(struct sys_device *sysdev)
+static int s3c2410a_cpufreq_add(struct device *dev)
 {
 	/* alter the maximum freq settings for S3C2410A. If a board knows
 	 * it only has a maximum of 200, then it should register its own
@@ -143,17 +144,18 @@ static int s3c2410a_cpufreq_add(struct sys_device *sysdev)
 	s3c2410_cpufreq_info.max.pclk =  66500000;
 	s3c2410_cpufreq_info.name = "s3c2410a";
 
-	return s3c2410_cpufreq_add(sysdev);
+	return s3c2410_cpufreq_add(dev);
 }
 
-static struct sysdev_driver s3c2410a_cpufreq_driver = {
-	.add		= s3c2410a_cpufreq_add,
+static struct subsys_interface s3c2410a_cpufreq_interface = {
+	.name		= "s3c2410a_cpufreq",
+	.subsys		= &s3c2410a_subsys,
+	.add_dev	= s3c2410a_cpufreq_add,
 };
 
 static int __init s3c2410a_cpufreq_init(void)
 {
-	return sysdev_driver_register(&s3c2410a_sysclass,
-				      &s3c2410a_cpufreq_driver);
+	return subsys_interface_register(&s3c2410a_cpufreq_interface);
 }
 
 arch_initcall(s3c2410a_cpufreq_init);
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index dbe43df..2afd000 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -14,7 +14,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/serial_core.h>
 
 #include <mach/map.h>
@@ -132,7 +132,7 @@ static struct s3c24xx_dma_order __initdata s3c2410_dma_order = {
 	},
 };
 
-static int __init s3c2410_dma_add(struct sys_device *sysdev)
+static int __init s3c2410_dma_add(struct device *dev)
 {
 	s3c2410_dma_init();
 	s3c24xx_dma_order_set(&s3c2410_dma_order);
@@ -140,24 +140,28 @@ static int __init s3c2410_dma_add(struct sys_device *sysdev)
 }
 
 #if defined(CONFIG_CPU_S3C2410)
-static struct sysdev_driver s3c2410_dma_driver = {
-	.add	= s3c2410_dma_add,
+static struct subsys_interface s3c2410_dma_interface = {
+	.name		= "s3c2410_dma",
+	.subsys		= &s3c2410_subsys,
+	.add_dev	= s3c2410_dma_add,
 };
 
 static int __init s3c2410_dma_drvinit(void)
 {
-	return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_dma_driver);
+	return subsys_interface_register(&s3c2410_interface);
 }
 
 arch_initcall(s3c2410_dma_drvinit);
 
-static struct sysdev_driver s3c2410a_dma_driver = {
-	.add	= s3c2410_dma_add,
+static struct subsys_interface s3c2410a_dma_interface = {
+	.name		= "s3c2410a_dma",
+	.subsys		= &s3c2410a_subsys,
+	.add_dev	= s3c2410_dma_add,
 };
 
 static int __init s3c2410a_dma_drvinit(void)
 {
-	return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_dma_driver);
+	return subsys_interface_register(&s3c2410a_dma_interface);
 }
 
 arch_initcall(s3c2410a_dma_drvinit);
@@ -165,13 +169,15 @@ arch_initcall(s3c2410a_dma_drvinit);
 
 #if defined(CONFIG_CPU_S3C2442)
 /* S3C2442 DMA contains the same selection table as the S3C2410 */
-static struct sysdev_driver s3c2442_dma_driver = {
-	.add	= s3c2410_dma_add,
+static struct subsys_interface s3c2442_dma_interface = {
+	.name		= "s3c2442_dma",
+	.subsys		= &s3c2442_subsys,
+	.add_dev	= s3c2410_dma_add,
 };
 
 static int __init s3c2442_dma_drvinit(void)
 {
-	return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_dma_driver);
+	return subsys_interface_register(&s3c2442_dma_interface);
 }
 
 arch_initcall(s3c2442_dma_drvinit);
diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h
index ae8e482..acbdfec 100644
--- a/arch/arm/mach-s3c2410/include/mach/dma.h
+++ b/arch/arm/mach-s3c2410/include/mach/dma.h
@@ -13,7 +13,7 @@
 #ifndef __ASM_ARCH_DMA_H
 #define __ASM_ARCH_DMA_H __FILE__
 
-#include <linux/sysdev.h>
+#include <linux/device.h>
 
 #define MAX_DMA_TRANSFER_SIZE   0x100000 /* Data Unit is half word  */
 
@@ -202,7 +202,7 @@ struct s3c2410_dma_chan {
 	struct s3c2410_dma_buf	*end;		/* end of queue */
 
 	/* system device */
-	struct sys_device	dev;
+	struct device	dev;
 };
 
 typedef unsigned long dma_device_t;
diff --git a/arch/arm/mach-s3c2410/include/mach/reset.h b/arch/arm/mach-s3c2410/include/mach/reset.h
deleted file mode 100644
index f8c9387..0000000
--- a/arch/arm/mach-s3c2410/include/mach/reset.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/reset.h
- *
- * Copyright (c) 2007 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 CPU reset controls
-*/
-
-#ifndef __ASM_ARCH_RESET_H
-#define __ASM_ARCH_RESET_H __FILE__
-
-/* This allows the over-ride of the default reset code
-*/
-
-extern void (*s3c24xx_reset_hook)(void);
-
-#endif /* __ASM_ARCH_RESET_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/system-reset.h b/arch/arm/mach-s3c2410/include/mach/system-reset.h
deleted file mode 100644
index 6faadce..0000000
--- a/arch/arm/mach-s3c2410/include/mach/system-reset.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/system-reset.h
- *
- * Copyright (c) 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - System define for arch_reset() function
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <mach/hardware.h>
-#include <plat/watchdog-reset.h>
-
-extern void (*s3c24xx_reset_hook)(void);
-
-static void
-arch_reset(char mode, const char *cmd)
-{
-	if (mode == 's') {
-		cpu_reset(0);
-	}
-
-	if (s3c24xx_reset_hook)
-		s3c24xx_reset_hook();
-
-	arch_wdt_reset();
-
-	/* we'll take a jump through zero as a poor second */
-	cpu_reset(0);
-}
diff --git a/arch/arm/mach-s3c2410/include/mach/system.h b/arch/arm/mach-s3c2410/include/mach/system.h
index a8cbca6..5e215c1 100644
--- a/arch/arm/mach-s3c2410/include/mach/system.h
+++ b/arch/arm/mach-s3c2410/include/mach/system.h
@@ -15,12 +15,10 @@
 
 #include <mach/map.h>
 #include <mach/idle.h>
-#include <mach/reset.h>
 
 #include <mach/regs-clock.h>
 
 void (*s3c24xx_idle)(void);
-void (*s3c24xx_reset_hook)(void);
 
 void s3c24xx_default_idle(void)
 {
@@ -54,5 +52,3 @@ static void arch_idle(void)
 	else
 		s3c24xx_default_idle();
 }
-
-#include <mach/system-reset.h>
diff --git a/arch/arm/mach-s3c2410/include/mach/vmalloc.h b/arch/arm/mach-s3c2410/include/mach/vmalloc.h
deleted file mode 100644
index 7a311e8..0000000
--- a/arch/arm/mach-s3c2410/include/mach/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/vmalloc.h
- *
- * from arch/arm/mach-iop3xx/include/mach/vmalloc.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 vmalloc definition
-*/
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END	0xF6000000UL
-
-#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index 7983894..4220cc6 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -63,6 +63,8 @@
 #include <linux/mtd/map.h>
 #include <linux/mtd/physmap.h>
 
+#include "common.h"
+
 static struct resource amlm5900_nor_resource = {
 		.start = 0x00000000,
 		.end   = 0x01000000 - 1,
@@ -241,4 +243,5 @@ MACHINE_START(AML_M5900, "AML_M5900")
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= amlm5900_init,
 	.timer		= &s3c24xx_timer,
+	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index a20ae1a..c6133c6 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -66,6 +66,7 @@
 
 #include "usb-simtec.h"
 #include "nor-simtec.h"
+#include "common.h"
 
 #define COPYRIGHT ", Copyright 2004-2008 Simtec Electronics"
 
@@ -662,4 +663,5 @@ MACHINE_START(BAST, "Simtec-BAST")
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= bast_init,
 	.timer		= &s3c24xx_timer,
+	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 05a7d16..41245a6 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -18,7 +18,7 @@
 #include <linux/memblock.h>
 #include <linux/timer.h>
 #include <linux/init.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
@@ -70,6 +70,8 @@
 
 #include <sound/uda1380.h>
 
+#include "common.h"
+
 #define H1940_LATCH		((void __force __iomem *)0xF8000000)
 
 #define H1940_PA_LATCH		S3C2410_CS2
@@ -751,4 +753,5 @@ MACHINE_START(H1940, "IPAQ-H1940")
 	.init_irq	= h1940_init_irq,
 	.init_machine	= h1940_init,
 	.timer		= &s3c24xx_timer,
+	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 1dc3e32..383d00c 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -51,6 +51,8 @@
 #include <plat/s3c2410.h>
 #include <plat/udc.h>
 
+#include "common.h"
+
 static struct map_desc n30_iodesc[] __initdata = {
 	/* nothing here yet */
 };
@@ -591,6 +593,7 @@ MACHINE_START(N30, "Acer-N30")
 	.init_machine	= n30_init,
 	.init_irq	= s3c24xx_init_irq,
 	.map_io		= n30_map_io,
+	.restart	= s3c2410_restart,
 MACHINE_END
 
 MACHINE_START(N35, "Acer-N35")
@@ -601,4 +604,5 @@ MACHINE_START(N35, "Acer-N35")
 	.init_machine	= n30_init,
 	.init_irq	= s3c24xx_init_irq,
 	.map_io		= n30_map_io,
+	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c
index f03f3fd..5f1e0ee 100644
--- a/arch/arm/mach-s3c2410/mach-otom.c
+++ b/arch/arm/mach-s3c2410/mach-otom.c
@@ -38,6 +38,8 @@
 #include <plat/iic.h>
 #include <plat/cpu.h>
 
+#include "common.h"
+
 static struct map_desc otom11_iodesc[] __initdata = {
   /* Device area */
 	{ (u32)OTOM_VA_CS8900A_BASE, OTOM_PA_CS8900A_BASE, SZ_16M, MT_DEVICE },
@@ -121,4 +123,5 @@ MACHINE_START(OTOM, "Nex Vision - Otom 1.1")
 	.init_machine	= otom11_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
+	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index 4518521..91c16d9 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -28,7 +28,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/gpio.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
 #include <linux/spi/spi.h>
@@ -62,6 +62,8 @@
 #include <plat/cpu.h>
 #include <plat/pm.h>
 
+#include "common.h"
+
 static struct map_desc qt2410_iodesc[] __initdata = {
 	{ 0xe0000000, __phys_to_pfn(S3C2410_CS3+0x01000000), SZ_1M, MT_DEVICE }
 };
@@ -350,6 +352,5 @@ MACHINE_START(QT2410, "QT2410")
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= qt2410_machine_init,
 	.timer		= &s3c24xx_timer,
+	.restart	= s3c2410_restart,
 MACHINE_END
-
-
diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c
index 99c9dfd..bdc27e7 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2410.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2410.c
@@ -54,6 +54,8 @@
 
 #include <plat/common-smdk.h>
 
+#include "common.h"
+
 static struct map_desc smdk2410_iodesc[] __initdata = {
   /* nothing here yet */
 };
@@ -116,6 +118,5 @@ MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switc
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= smdk2410_init,
 	.timer		= &s3c24xx_timer,
+	.restart	= s3c2410_restart,
 MACHINE_END
-
-
diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c
index e0d0b6f..1114666f 100644
--- a/arch/arm/mach-s3c2410/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c
@@ -54,6 +54,8 @@
 #include <linux/mtd/map.h>
 #include <linux/mtd/physmap.h>
 
+#include "common.h"
+
 static struct resource tct_hammer_nor_resource = {
 		.start = 0x00000000,
 		.end   = 0x01000000 - 1,
@@ -151,4 +153,5 @@ MACHINE_START(TCT_HAMMER, "TCT_HAMMER")
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= tct_hammer_init,
 	.timer		= &s3c24xx_timer,
+	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index df47e8e..cc7032b 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -53,6 +53,7 @@
 
 #include "usb-simtec.h"
 #include "nor-simtec.h"
+#include "common.h"
 
 /* macros for virtual address mods for the io space entries */
 #define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5)
@@ -405,4 +406,5 @@ MACHINE_START(VR1000, "Thorcom-VR1000")
 	.init_machine	= vr1000_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
+	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2410/pll.c b/arch/arm/mach-s3c2410/pll.c
index 8338865..c07438b 100644
--- a/arch/arm/mach-s3c2410/pll.c
+++ b/arch/arm/mach-s3c2410/pll.c
@@ -25,7 +25,7 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/list.h>
 #include <linux/clk.h>
 #include <linux/err.h>
@@ -66,30 +66,34 @@ static struct cpufreq_frequency_table pll_vals_12MHz[] = {
     { .frequency = 270000000, .index = PLLVAL(127, 1, 1),  },
 };
 
-static int s3c2410_plls_add(struct sys_device *dev)
+static int s3c2410_plls_add(struct device *dev)
 {
 	return s3c_plltab_register(pll_vals_12MHz, ARRAY_SIZE(pll_vals_12MHz));
 }
 
-static struct sysdev_driver s3c2410_plls_drv = {
-	.add	= s3c2410_plls_add,
+static struct subsys_interface s3c2410_plls_interface = {
+	.name		= "s3c2410_plls",
+	.subsys		= &s3c2410_subsys,
+	.add_dev	= s3c2410_plls_add,
 };
 
 static int __init s3c2410_pll_init(void)
 {
-	return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_plls_drv);
+	return subsys_interface_register(&s3c2410_plls_interface);
 
 }
 
 arch_initcall(s3c2410_pll_init);
 
-static struct sysdev_driver s3c2410a_plls_drv = {
-	.add	= s3c2410_plls_add,
+static struct subsys_interface s3c2410a_plls_interface = {
+	.name		= "s3c2410a_plls",
+	.subsys		= &s3c2410a_subsys,
+	.add_dev	= s3c2410_plls_add,
 };
 
 static int __init s3c2410a_pll_init(void)
 {
-	return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_plls_drv);
+	return subsys_interface_register(&s3c2410a_plls_interface);
 }
 
 arch_initcall(s3c2410a_pll_init);
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index 4728f9a..fda5385 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -24,7 +24,7 @@
 #include <linux/suspend.h>
 #include <linux/errno.h>
 #include <linux/time.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/syscore_ops.h>
 #include <linux/gpio.h>
 #include <linux/io.h>
@@ -111,7 +111,7 @@ struct syscore_ops s3c2410_pm_syscore_ops = {
 	.resume		= s3c2410_pm_resume,
 };
 
-static int s3c2410_pm_add(struct sys_device *dev)
+static int s3c2410_pm_add(struct device *dev)
 {
 	pm_cpu_prep = s3c2410_pm_prepare;
 	pm_cpu_sleep = s3c2410_cpu_suspend;
@@ -120,52 +120,60 @@ static int s3c2410_pm_add(struct sys_device *dev)
 }
 
 #if defined(CONFIG_CPU_S3C2410)
-static struct sysdev_driver s3c2410_pm_driver = {
-	.add		= s3c2410_pm_add,
+static struct subsys_interface s3c2410_pm_interface = {
+	.name		= "s3c2410_pm",
+	.subsys		= &s3c2410_subsys,
+	.add_dev	= s3c2410_pm_add,
 };
 
 /* register ourselves */
 
 static int __init s3c2410_pm_drvinit(void)
 {
-	return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_pm_driver);
+	return subsys_interface_register(&s3c2410_pm_interface);
 }
 
 arch_initcall(s3c2410_pm_drvinit);
 
-static struct sysdev_driver s3c2410a_pm_driver = {
-	.add		= s3c2410_pm_add,
+static struct subsys_interface s3c2410a_pm_interface = {
+	.name		= "s3c2410a_pm",
+	.subsys		= &s3c2410a_subsys,
+	.add_dev	= s3c2410_pm_add,
 };
 
 static int __init s3c2410a_pm_drvinit(void)
 {
-	return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_pm_driver);
+	return subsys_interface_register(&s3c2410a_pm_interface);
 }
 
 arch_initcall(s3c2410a_pm_drvinit);
 #endif
 
 #if defined(CONFIG_CPU_S3C2440)
-static struct sysdev_driver s3c2440_pm_driver = {
-	.add		= s3c2410_pm_add,
+static struct subsys_interface s3c2440_pm_interface = {
+	.name		= "s3c2440_pm",
+	.subsys		= &s3c2440_subsys,
+	.add_dev	= s3c2410_pm_add,
 };
 
 static int __init s3c2440_pm_drvinit(void)
 {
-	return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_pm_driver);
+	return subsys_interface_register(&s3c2440_pm_interface);
 }
 
 arch_initcall(s3c2440_pm_drvinit);
 #endif
 
 #if defined(CONFIG_CPU_S3C2442)
-static struct sysdev_driver s3c2442_pm_driver = {
-	.add		= s3c2410_pm_add,
+static struct subsys_interface s3c2442_pm_interface = {
+	.name		= "s3c2442_pm",
+	.subsys		= &s3c2442_subsys,
+	.add_dev	= s3c2410_pm_add,
 };
 
 static int __init s3c2442_pm_drvinit(void)
 {
-	return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_pm_driver);
+	return subsys_interface_register(&s3c2442_pm_interface);
 }
 
 arch_initcall(s3c2442_pm_drvinit);
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index 3d7ebc5..eea559e 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -18,7 +18,7 @@
 #include <linux/init.h>
 #include <linux/gpio.h>
 #include <linux/clk.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/syscore_ops.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
@@ -42,6 +42,7 @@
 #include <plat/clock.h>
 #include <plat/pll.h>
 #include <plat/pm.h>
+#include <plat/watchdog-reset.h>
 
 #include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
@@ -131,22 +132,24 @@ void __init s3c2410_init_clocks(int xtal)
 	s3c24xx_register_clock(&s3c2410_armclk);
 }
 
-struct sysdev_class s3c2410_sysclass = {
+struct bus_type s3c2410_subsys = {
 	.name = "s3c2410-core",
+	.dev_name = "s3c2410-core",
 };
 
 /* Note, we would have liked to name this s3c2410-core, but we cannot
- * register two sysdev_class with the same name.
+ * register two subsystems with the same name.
  */
-struct sysdev_class s3c2410a_sysclass = {
+struct bus_type s3c2410a_subsys = {
 	.name = "s3c2410a-core",
+	.dev_name = "s3c2410a-core",
 };
 
-static struct sys_device s3c2410_sysdev = {
-	.cls		= &s3c2410_sysclass,
+static struct device s3c2410_dev = {
+	.bus		= &s3c2410_subsys,
 };
 
-/* need to register class before we actually register the device, and
+/* need to register the subsystem before we actually register the device, and
  * we also need to ensure that it has been initialised before any of the
  * drivers even try to use it (even if not on an s3c2410 based system)
  * as a driver which may support both 2410 and 2440 may try and use it.
@@ -154,14 +157,14 @@ static struct sys_device s3c2410_sysdev = {
 
 static int __init s3c2410_core_init(void)
 {
-	return sysdev_class_register(&s3c2410_sysclass);
+	return subsys_system_register(&s3c2410_subsys, NULL);
 }
 
 core_initcall(s3c2410_core_init);
 
 static int __init s3c2410a_core_init(void)
 {
-	return sysdev_class_register(&s3c2410a_sysclass);
+	return subsys_system_register(&s3c2410a_subsys, NULL);
 }
 
 core_initcall(s3c2410a_core_init);
@@ -175,11 +178,23 @@ int __init s3c2410_init(void)
 #endif
 	register_syscore_ops(&s3c24xx_irq_syscore_ops);
 
-	return sysdev_register(&s3c2410_sysdev);
+	return device_register(&s3c2410_dev);
 }
 
 int __init s3c2410a_init(void)
 {
-	s3c2410_sysdev.cls = &s3c2410a_sysclass;
+	s3c2410_dev.bus = &s3c2410a_subsys;
 	return s3c2410_init();
 }
+
+void s3c2410_restart(char mode, const char *cmd)
+{
+	if (mode == 's') {
+		soft_restart(0);
+	}
+
+	arch_wdt_reset();
+
+	/* we'll take a jump through zero as a poor second */
+	soft_restart(0);
+}
diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c
index 140711d..5168816 100644
--- a/arch/arm/mach-s3c2412/clock.c
+++ b/arch/arm/mach-s3c2412/clock.c
@@ -26,7 +26,7 @@
 #include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/err.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/clk.h>
 #include <linux/mutex.h>
 #include <linux/delay.h>
diff --git a/arch/arm/mach-s3c2412/cpu-freq.c b/arch/arm/mach-s3c2412/cpu-freq.c
index eb3ea17..d8664b7 100644
--- a/arch/arm/mach-s3c2412/cpu-freq.c
+++ b/arch/arm/mach-s3c2412/cpu-freq.c
@@ -16,7 +16,7 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/cpufreq.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/err.h>
@@ -194,7 +194,7 @@ static struct s3c_cpufreq_info s3c2412_cpufreq_info = {
 	.debug_io_show  = s3c_cpufreq_debugfs_call(s3c2412_iotiming_debugfs),
 };
 
-static int s3c2412_cpufreq_add(struct sys_device *sysdev)
+static int s3c2412_cpufreq_add(struct device *dev)
 {
 	unsigned long fclk_rate;
 
@@ -244,14 +244,15 @@ err_fclk:
 	return -ENOENT;
 }
 
-static struct sysdev_driver s3c2412_cpufreq_driver = {
-	.add		= s3c2412_cpufreq_add,
+static struct subsys_interface s3c2412_cpufreq_interface = {
+	.name		= "s3c2412_cpufreq",
+	.subsys		= &s3c2412_subsys,
+	.add_dev	= s3c2412_cpufreq_add,
 };
 
 static int s3c2412_cpufreq_init(void)
 {
-	return sysdev_driver_register(&s3c2412_sysclass,
-				      &s3c2412_cpufreq_driver);
+	return subsys_interface_register(&s3c2412_cpufreq_interface);
 }
 
 arch_initcall(s3c2412_cpufreq_init);
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
index d2a7d5ef..142acd3 100644
--- a/arch/arm/mach-s3c2412/dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -14,7 +14,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/serial_core.h>
 #include <linux/io.h>
 
@@ -159,19 +159,21 @@ static struct s3c24xx_dma_selection __initdata s3c2412_dma_sel = {
 	.map_size	= ARRAY_SIZE(s3c2412_dma_mappings),
 };
 
-static int __init s3c2412_dma_add(struct sys_device *sysdev)
+static int __init s3c2412_dma_add(struct device *dev)
 {
 	s3c2410_dma_init();
 	return s3c24xx_dma_init_map(&s3c2412_dma_sel);
 }
 
-static struct sysdev_driver s3c2412_dma_driver = {
-	.add	= s3c2412_dma_add,
+static struct subsys_interface s3c2412_dma_interface = {
+	.name		= "s3c2412_dma",
+	.subsys		= &s3c2412_subsys,
+	.add_dev	= s3c2412_dma_add,
 };
 
 static int __init s3c2412_dma_init(void)
 {
-	return sysdev_driver_register(&s3c2412_sysclass, &s3c2412_dma_driver);
+	return subsys_interface_register(&s3c2412_dma_interface);
 }
 
 arch_initcall(s3c2412_dma_init);
diff --git a/arch/arm/mach-s3c2412/irq.c b/arch/arm/mach-s3c2412/irq.c
index 1a1aa22..a8a46c1 100644
--- a/arch/arm/mach-s3c2412/irq.c
+++ b/arch/arm/mach-s3c2412/irq.c
@@ -23,7 +23,7 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -170,7 +170,7 @@ static int s3c2412_irq_rtc_wake(struct irq_data *data, unsigned int state)
 
 static struct irq_chip s3c2412_irq_rtc_chip;
 
-static int s3c2412_irq_add(struct sys_device *sysdev)
+static int s3c2412_irq_add(struct device *dev)
 {
 	unsigned int irqno;
 
@@ -200,13 +200,15 @@ static int s3c2412_irq_add(struct sys_device *sysdev)
 	return 0;
 }
 
-static struct sysdev_driver s3c2412_irq_driver = {
-	.add		= s3c2412_irq_add,
+static struct subsys_interface s3c2412_irq_interface = {
+	.name		= "s3c2412_irq",
+	.subsys		= &s3c2412_subsys,
+	.add_dev	= s3c2412_irq_add,
 };
 
 static int s3c2412_irq_init(void)
 {
-	return sysdev_driver_register(&s3c2412_sysclass, &s3c2412_irq_driver);
+	return subsys_interface_register(&s3c2412_irq_interface);
 }
 
 arch_initcall(s3c2412_irq_init);
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index 286ef17..ae73ba3 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -48,6 +48,7 @@
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/partitions.h>
 
+#include <plat/s3c2412.h>
 #include <plat/gpio-cfg.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
@@ -661,4 +662,5 @@ MACHINE_START(JIVE, "JIVE")
 	.map_io		= jive_map_io,
 	.init_machine	= jive_machine_init,
 	.timer		= &s3c24xx_timer,
+	.restart	= s3c2412_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index f1eec1b..b11451b 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -134,6 +134,7 @@ MACHINE_START(S3C2413, "S3C2413")
 	.map_io		= smdk2413_map_io,
 	.init_machine	= smdk2413_machine_init,
 	.timer		= &s3c24xx_timer,
+	.restart	= s3c2412_restart,
 MACHINE_END
 
 MACHINE_START(SMDK2412, "SMDK2412")
@@ -145,6 +146,7 @@ MACHINE_START(SMDK2412, "SMDK2412")
 	.map_io		= smdk2413_map_io,
 	.init_machine	= smdk2413_machine_init,
 	.timer		= &s3c24xx_timer,
+	.restart	= s3c2412_restart,
 MACHINE_END
 
 MACHINE_START(SMDK2413, "SMDK2413")
@@ -156,4 +158,5 @@ MACHINE_START(SMDK2413, "SMDK2413")
 	.map_io		= smdk2413_map_io,
 	.init_machine	= smdk2413_machine_init,
 	.timer		= &s3c24xx_timer,
+	.restart	= s3c2412_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c
index 1bbb1ef..94bfaa1 100644
--- a/arch/arm/mach-s3c2412/mach-vstms.c
+++ b/arch/arm/mach-s3c2412/mach-vstms.c
@@ -162,4 +162,5 @@ MACHINE_START(VSTMS, "VSTMS")
 	.init_machine	= vstms_init,
 	.map_io		= vstms_map_io,
 	.timer		= &s3c24xx_timer,
+	.restart	= s3c2412_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c
index f4077ef..d1adfa6 100644
--- a/arch/arm/mach-s3c2412/pm.c
+++ b/arch/arm/mach-s3c2412/pm.c
@@ -16,7 +16,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/syscore_ops.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
@@ -56,7 +56,7 @@ static void s3c2412_pm_prepare(void)
 {
 }
 
-static int s3c2412_pm_add(struct sys_device *sysdev)
+static int s3c2412_pm_add(struct device *dev)
 {
 	pm_cpu_prep = s3c2412_pm_prepare;
 	pm_cpu_sleep = s3c2412_cpu_suspend;
@@ -87,13 +87,15 @@ static struct sleep_save s3c2412_sleep[] = {
 	SAVE_ITEM(S3C2413_GPJSLPCON),
 };
 
-static struct sysdev_driver s3c2412_pm_driver = {
-	.add		= s3c2412_pm_add,
+static struct subsys_interface s3c2412_pm_interface = {
+	.name		= "s3c2412_pm",
+	.subsys		= &s3c2412_subsys,
+	.add_dev	= s3c2412_pm_add,
 };
 
 static __init int s3c2412_pm_init(void)
 {
-	return sysdev_driver_register(&s3c2412_sysclass, &s3c2412_pm_driver);
+	return subsys_interface_register(&s3c2412_pm_interface);
 }
 
 arch_initcall(s3c2412_pm_init);
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index 57a1e01..aff6e85 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -18,7 +18,7 @@
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/syscore_ops.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
@@ -32,7 +32,6 @@
 #include <asm/proc-fns.h>
 #include <asm/irq.h>
 
-#include <mach/reset.h>
 #include <mach/idle.h>
 
 #include <plat/cpu-freq.h>
@@ -131,8 +130,11 @@ static void s3c2412_idle(void)
 	cpu_do_idle();
 }
 
-static void s3c2412_hard_reset(void)
+void s3c2412_restart(char mode, const char *cmd)
 {
+	if (mode == 's')
+		soft_restart(0);
+
 	/* errata "Watch-dog/Software Reset Problem" specifies that
 	 * this reset must be done with the SYSCLK sourced from
 	 * EXTCLK instead of FOUT to avoid a glitch in the reset
@@ -164,10 +166,6 @@ void __init s3c2412_map_io(void)
 
 	s3c24xx_idle = s3c2412_idle;
 
-	/* set custom reset hook */
-
-	s3c24xx_reset_hook = s3c2412_hard_reset;
-
 	/* register our io-tables */
 
 	iotable_init(s3c2412_iodesc, ARRAY_SIZE(s3c2412_iodesc));
@@ -220,25 +218,26 @@ void __init s3c2412_init_clocks(int xtal)
 	s3c2412_baseclk_add();
 }
 
-/* need to register class before we actually register the device, and
+/* need to register the subsystem before we actually register the device, and
  * we also need to ensure that it has been initialised before any of the
  * drivers even try to use it (even if not on an s3c2412 based system)
  * as a driver which may support both 2410 and 2440 may try and use it.
 */
 
-struct sysdev_class s3c2412_sysclass = {
+struct bus_type s3c2412_subsys = {
 	.name = "s3c2412-core",
+	.dev_name = "s3c2412-core",
 };
 
 static int __init s3c2412_core_init(void)
 {
-	return sysdev_class_register(&s3c2412_sysclass);
+	return subsys_system_register(&s3c2412_subsys, NULL);
 }
 
 core_initcall(s3c2412_core_init);
 
-static struct sys_device s3c2412_sysdev = {
-	.cls		= &s3c2412_sysclass,
+static struct device s3c2412_dev = {
+	.bus		= &s3c2412_subsys,
 };
 
 int __init s3c2412_init(void)
@@ -250,5 +249,5 @@ int __init s3c2412_init(void)
 #endif
 	register_syscore_ops(&s3c24xx_irq_syscore_ops);
 
-	return sysdev_register(&s3c2412_sysdev);
+	return device_register(&s3c2412_dev);
 }
diff --git a/arch/arm/mach-s3c2416/irq.c b/arch/arm/mach-s3c2416/irq.c
index 28ad20d..36df761 100644
--- a/arch/arm/mach-s3c2416/irq.c
+++ b/arch/arm/mach-s3c2416/irq.c
@@ -25,7 +25,7 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -213,7 +213,7 @@ static int __init s3c2416_add_sub(unsigned int base,
 	return 0;
 }
 
-static int __init s3c2416_irq_add(struct sys_device *sysdev)
+static int __init s3c2416_irq_add(struct device *dev)
 {
 	printk(KERN_INFO "S3C2416: IRQ Support\n");
 
@@ -234,13 +234,15 @@ static int __init s3c2416_irq_add(struct sys_device *sysdev)
 	return 0;
 }
 
-static struct sysdev_driver s3c2416_irq_driver = {
-	.add		= s3c2416_irq_add,
+static struct subsys_interface s3c2416_irq_interface = {
+	.name		= "s3c2416_irq",
+	.subsys		= &s3c2416_subsys,
+	.add_dev	= s3c2416_irq_add,
 };
 
 static int __init s3c2416_irq_init(void)
 {
-	return sysdev_driver_register(&s3c2416_sysclass, &s3c2416_irq_driver);
+	return subsys_interface_register(&s3c2416_irq_interface);
 }
 
 arch_initcall(s3c2416_irq_init);
diff --git a/arch/arm/mach-s3c2416/mach-smdk2416.c b/arch/arm/mach-s3c2416/mach-smdk2416.c
index a9eee53..66b7173 100644
--- a/arch/arm/mach-s3c2416/mach-smdk2416.c
+++ b/arch/arm/mach-s3c2416/mach-smdk2416.c
@@ -251,4 +251,5 @@ MACHINE_START(SMDK2416, "SMDK2416")
 	.map_io		= smdk2416_map_io,
 	.init_machine	= smdk2416_machine_init,
 	.timer		= &s3c24xx_timer,
+	.restart	= s3c2416_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2416/pm.c b/arch/arm/mach-s3c2416/pm.c
index 9ec54f1..3bdb15a 100644
--- a/arch/arm/mach-s3c2416/pm.c
+++ b/arch/arm/mach-s3c2416/pm.c
@@ -10,7 +10,7 @@
  * published by the Free Software Foundation.
 */
 
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/syscore_ops.h>
 #include <linux/io.h>
 
@@ -48,7 +48,7 @@ static void s3c2416_pm_prepare(void)
 	__raw_writel(virt_to_phys(s3c_cpu_resume), S3C2412_INFORM1);
 }
 
-static int s3c2416_pm_add(struct sys_device *sysdev)
+static int s3c2416_pm_add(struct device *dev)
 {
 	pm_cpu_prep = s3c2416_pm_prepare;
 	pm_cpu_sleep = s3c2416_cpu_suspend;
@@ -56,13 +56,15 @@ static int s3c2416_pm_add(struct sys_device *sysdev)
 	return 0;
 }
 
-static struct sysdev_driver s3c2416_pm_driver = {
-	.add		= s3c2416_pm_add,
+static struct subsys_interface s3c2416_pm_interface = {
+	.name		= "s3c2416_pm",
+	.subsys		= &s3c2416_subsys,
+	.add_dev	= s3c2416_pm_add,
 };
 
 static __init int s3c2416_pm_init(void)
 {
-	return sysdev_driver_register(&s3c2416_sysclass, &s3c2416_pm_driver);
+	return subsys_interface_register(&s3c2416_pm_interface);
 }
 
 arch_initcall(s3c2416_pm_init);
diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c
index ee214bc..5287d28 100644
--- a/arch/arm/mach-s3c2416/s3c2416.c
+++ b/arch/arm/mach-s3c2416/s3c2416.c
@@ -31,7 +31,7 @@
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/syscore_ops.h>
 #include <linux/clk.h>
 #include <linux/io.h>
@@ -44,7 +44,6 @@
 #include <asm/proc-fns.h>
 #include <asm/irq.h>
 
-#include <mach/reset.h>
 #include <mach/idle.h>
 #include <mach/regs-s3c2443-clock.h>
 
@@ -68,16 +67,20 @@ static struct map_desc s3c2416_iodesc[] __initdata = {
 	IODESC_ENT(TIMER),
 };
 
-struct sysdev_class s3c2416_sysclass = {
+struct bus_type s3c2416_subsys = {
 	.name = "s3c2416-core",
+	.dev_name = "s3c2416-core",
 };
 
-static struct sys_device s3c2416_sysdev = {
-	.cls		= &s3c2416_sysclass,
+static struct device s3c2416_dev = {
+	.bus		= &s3c2416_subsys,
 };
 
-static void s3c2416_hard_reset(void)
+void s3c2416_restart(char mode, const char *cmd)
 {
+	if (mode == 's')
+		soft_restart(0);
+
 	__raw_writel(S3C2443_SWRST_RESET, S3C2443_SWRST);
 }
 
@@ -85,7 +88,6 @@ int __init s3c2416_init(void)
 {
 	printk(KERN_INFO "S3C2416: Initializing architecture\n");
 
-	s3c24xx_reset_hook = s3c2416_hard_reset;
 	/* s3c24xx_idle = s3c2416_idle;	*/
 
 	/* change WDT IRQ number */
@@ -105,7 +107,7 @@ int __init s3c2416_init(void)
 #endif
 	register_syscore_ops(&s3c24xx_irq_syscore_ops);
 
-	return sysdev_register(&s3c2416_sysdev);
+	return device_register(&s3c2416_dev);
 }
 
 void __init s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no)
@@ -133,7 +135,7 @@ void __init s3c2416_map_io(void)
 	iotable_init(s3c2416_iodesc, ARRAY_SIZE(s3c2416_iodesc));
 }
 
-/* need to register class before we actually register the device, and
+/* need to register the subsystem before we actually register the device, and
  * we also need to ensure that it has been initialised before any of the
  * drivers even try to use it (even if not on an s3c2416 based system)
  * as a driver which may support both 2443 and 2440 may try and use it.
@@ -141,7 +143,7 @@ void __init s3c2416_map_io(void)
 
 static int __init s3c2416_core_init(void)
 {
-	return sysdev_class_register(&s3c2416_sysclass);
+	return subsys_system_register(&s3c2416_subsys, NULL);
 }
 
 core_initcall(s3c2416_core_init);
diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c
index f9e6bda..d895759 100644
--- a/arch/arm/mach-s3c2440/clock.c
+++ b/arch/arm/mach-s3c2440/clock.c
@@ -28,7 +28,6 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/device.h>
-#include <linux/sysdev.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/mutex.h>
@@ -108,7 +107,7 @@ static struct clk s3c2440_clk_ac97 = {
 	.ctrlbit	= S3C2440_CLKCON_CAMERA,
 };
 
-static int s3c2440_clk_add(struct sys_device *sysdev)
+static int s3c2440_clk_add(struct device *dev)
 {
 	struct clk *clock_upll;
 	struct clk *clock_h;
@@ -137,13 +136,15 @@ static int s3c2440_clk_add(struct sys_device *sysdev)
 	return 0;
 }
 
-static struct sysdev_driver s3c2440_clk_driver = {
-	.add	= s3c2440_clk_add,
+static struct subsys_interface s3c2440_clk_interface = {
+	.name		= "s3c2440_clk",
+	.subsys		= &s3c2440_subsys,
+	.add_dev	= s3c2440_clk_add,
 };
 
-static __init int s3c24xx_clk_driver(void)
+static __init int s3c24xx_clk_init(void)
 {
-	return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_clk_driver);
+	return subsys_interface_register(&s3c2440_clk_interface);
 }
 
-arch_initcall(s3c24xx_clk_driver);
+arch_initcall(s3c24xx_clk_init);
diff --git a/arch/arm/mach-s3c2440/common.h b/arch/arm/mach-s3c2440/common.h
new file mode 100644
index 0000000..db8a98a
--- /dev/null
+++ b/arch/arm/mach-s3c2440/common.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Common Header for S3C2440 machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_S3C2440_COMMON_H
+#define __ARCH_ARM_MACH_S3C2440_COMMON_H
+
+void s3c2440_restart(char mode, const char *cmd);
+
+#endif /* __ARCH_ARM_MACH_S3C2440_COMMON_H */
diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c
index 0e73f8f..15b1ddf 100644
--- a/arch/arm/mach-s3c2440/dma.c
+++ b/arch/arm/mach-s3c2440/dma.c
@@ -14,7 +14,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/serial_core.h>
 
 #include <mach/map.h>
@@ -174,20 +174,22 @@ static struct s3c24xx_dma_order __initdata s3c2440_dma_order = {
 	},
 };
 
-static int __init s3c2440_dma_add(struct sys_device *sysdev)
+static int __init s3c2440_dma_add(struct device *dev)
 {
 	s3c2410_dma_init();
 	s3c24xx_dma_order_set(&s3c2440_dma_order);
 	return s3c24xx_dma_init_map(&s3c2440_dma_sel);
 }
 
-static struct sysdev_driver s3c2440_dma_driver = {
-	.add	= s3c2440_dma_add,
+static struct subsys_interface s3c2440_dma_interface = {
+	.name		= "s3c2440_dma",
+	.subsys		= &s3c2440_subsys,
+	.add_dev	= s3c2440_dma_add,
 };
 
 static int __init s3c2440_dma_init(void)
 {
-	return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_dma_driver);
+	return subsys_interface_register(&s3c2440_dma_interface);
 }
 
 arch_initcall(s3c2440_dma_init);
diff --git a/arch/arm/mach-s3c2440/irq.c b/arch/arm/mach-s3c2440/irq.c
index eb1cc0f..4fee9bc 100644
--- a/arch/arm/mach-s3c2440/irq.c
+++ b/arch/arm/mach-s3c2440/irq.c
@@ -23,7 +23,7 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -92,7 +92,7 @@ static struct irq_chip s3c_irq_wdtac97 = {
 	.irq_ack	= s3c_irq_wdtac97_ack,
 };
 
-static int s3c2440_irq_add(struct sys_device *sysdev)
+static int s3c2440_irq_add(struct device *dev)
 {
 	unsigned int irqno;
 
@@ -113,13 +113,15 @@ static int s3c2440_irq_add(struct sys_device *sysdev)
 	return 0;
 }
 
-static struct sysdev_driver s3c2440_irq_driver = {
-	.add		= s3c2440_irq_add,
+static struct subsys_interface s3c2440_irq_interface = {
+	.name		= "s3c2440_irq",
+	.subsys		= &s3c2440_subsys,
+	.add_dev	= s3c2440_irq_add,
 };
 
 static int s3c2440_irq_init(void)
 {
-	return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_irq_driver);
+	return subsys_interface_register(&s3c2440_irq_interface);
 }
 
 arch_initcall(s3c2440_irq_init);
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index 74f92fc..121ff8d 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -55,6 +55,8 @@
 #include <plat/cpu.h>
 #include <plat/audio-simtec.h>
 
+#include "common.h"
+
 #define COPYRIGHT ", Copyright 2005-2009 Simtec Electronics"
 
 static struct map_desc anubis_iodesc[] __initdata = {
@@ -503,4 +505,5 @@ MACHINE_START(ANUBIS, "Simtec-Anubis")
 	.init_machine	= anubis_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
+	.restart	= s3c2440_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index 38887ee..b7e334f 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -49,6 +49,8 @@
 #include <plat/cpu.h>
 #include <plat/mci.h>
 
+#include "common.h"
+
 static struct map_desc at2440evb_iodesc[] __initdata = {
 	/* Nothing here */
 };
@@ -238,4 +240,5 @@ MACHINE_START(AT2440EVB, "AT2440EVB")
 	.init_machine	= at2440evb_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
+	.restart	= s3c2440_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
index de1e0ff..5859e60 100644
--- a/arch/arm/mach-s3c2440/mach-gta02.c
+++ b/arch/arm/mach-s3c2440/mach-gta02.c
@@ -90,6 +90,7 @@
 #include <plat/iic.h>
 #include <plat/ts.h>
 
+#include "common.h"
 
 static struct pcf50633 *gta02_pcf;
 
@@ -600,4 +601,5 @@ MACHINE_START(NEO1973_GTA02, "GTA02")
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= gta02_machine_init,
 	.timer		= &s3c24xx_timer,
+	.restart	= s3c2440_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index 91fe0b4..437322f 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -60,6 +60,8 @@
 
 #include <sound/s3c24xx_uda134x.h>
 
+#include "common.h"
+
 #define MACH_MINI2440_DM9K_BASE (S3C2410_CS4 + 0x300)
 
 static struct map_desc mini2440_iodesc[] __initdata = {
@@ -681,4 +683,5 @@ MACHINE_START(MINI2440, "MINI2440")
 	.init_machine	= mini2440_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
+	.restart	= s3c2440_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index 61c0bf1..40eaf84 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -47,6 +47,8 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 
+#include "common.h"
+
 static struct map_desc nexcoder_iodesc[] __initdata = {
 	/* nothing here yet */
 };
@@ -156,4 +158,5 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
 	.init_machine	= nexcoder_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
+	.restart	= s3c2440_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index dc142eb..e795715 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -54,6 +54,8 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 
+#include "common.h"
+
 /* onboard perihperal map */
 
 static struct map_desc osiris_iodesc[] __initdata = {
@@ -452,4 +454,5 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS")
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= osiris_init,
 	.timer		= &s3c24xx_timer,
+	.restart	= s3c2440_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c
index 0d3453b..332d753 100644
--- a/arch/arm/mach-s3c2440/mach-rx1950.c
+++ b/arch/arm/mach-s3c2440/mach-rx1950.c
@@ -24,7 +24,7 @@
 #include <linux/serial_core.h>
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
 #include <linux/pwm.h>
@@ -62,6 +62,8 @@
 
 #include <sound/uda1380.h>
 
+#include "common.h"
+
 #define LCD_PWM_PERIOD 192960
 #define LCD_PWM_DUTY 127353
 
@@ -832,4 +834,5 @@ MACHINE_START(RX1950, "HP iPAQ RX1950")
 	.init_irq = s3c24xx_init_irq,
 	.init_machine = rx1950_init_machine,
 	.timer = &s3c24xx_timer,
+	.restart	= s3c2440_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index e19499c..80a0972 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -20,7 +20,7 @@
 #include <linux/init.h>
 #include <linux/tty.h>
 #include <linux/console.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
 #include <linux/serial.h>
@@ -51,6 +51,8 @@
 #include <plat/cpu.h>
 #include <plat/pm.h>
 
+#include "common.h"
+
 static struct map_desc rx3715_iodesc[] __initdata = {
 	/* dump ISA space somewhere unused */
 
@@ -224,4 +226,5 @@ MACHINE_START(RX3715, "IPAQ-RX3715")
 	.init_irq	= rx3715_init_irq,
 	.init_machine	= rx3715_init_machine,
 	.timer		= &s3c24xx_timer,
+	.restart	= s3c2440_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index 36eeb41..1deb60d 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -47,6 +47,8 @@
 
 #include <plat/common-smdk.h>
 
+#include "common.h"
+
 static struct map_desc smdk2440_iodesc[] __initdata = {
 	/* ISA IO Space map (memory space selected by A24) */
 
@@ -181,4 +183,5 @@ MACHINE_START(S3C2440, "SMDK2440")
 	.map_io		= smdk2440_map_io,
 	.init_machine	= smdk2440_machine_init,
 	.timer		= &s3c24xx_timer,
+	.restart	= s3c2440_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2440/s3c2440-cpufreq.c b/arch/arm/mach-s3c2440/s3c2440-cpufreq.c
index 976002f..cf75966 100644
--- a/arch/arm/mach-s3c2440/s3c2440-cpufreq.c
+++ b/arch/arm/mach-s3c2440/s3c2440-cpufreq.c
@@ -17,7 +17,7 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/cpufreq.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/err.h>
@@ -270,7 +270,7 @@ struct s3c_cpufreq_info s3c2440_cpufreq_info = {
 	.debug_io_show  = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
 };
 
-static int s3c2440_cpufreq_add(struct sys_device *sysdev)
+static int s3c2440_cpufreq_add(struct device *dev)
 {
 	xtal = s3c_cpufreq_clk_get(NULL, "xtal");
 	hclk = s3c_cpufreq_clk_get(NULL, "hclk");
@@ -285,27 +285,29 @@ static int s3c2440_cpufreq_add(struct sys_device *sysdev)
 	return s3c_cpufreq_register(&s3c2440_cpufreq_info);
 }
 
-static struct sysdev_driver s3c2440_cpufreq_driver = {
-	.add		= s3c2440_cpufreq_add,
+static struct subsys_interface s3c2440_cpufreq_interface = {
+	.name		= "s3c2440_cpufreq",
+	.subsys		= &s3c2440_subsys,
+	.add_dev	= s3c2440_cpufreq_add,
 };
 
 static int s3c2440_cpufreq_init(void)
 {
-	return sysdev_driver_register(&s3c2440_sysclass,
-				      &s3c2440_cpufreq_driver);
+	return subsys_interface_register(&s3c2440_cpufreq_interface);
 }
 
 /* arch_initcall adds the clocks we need, so use subsys_initcall. */
 subsys_initcall(s3c2440_cpufreq_init);
 
-static struct sysdev_driver s3c2442_cpufreq_driver = {
-	.add		= s3c2440_cpufreq_add,
+static struct subsys_interface s3c2442_cpufreq_interface = {
+	.name		= "s3c2442_cpufreq",
+	.subsys		= &s3c2442_subsys,
+	.add_dev	= s3c2440_cpufreq_add,
 };
 
 static int s3c2442_cpufreq_init(void)
 {
-	return sysdev_driver_register(&s3c2442_sysclass,
-				      &s3c2442_cpufreq_driver);
+	return subsys_interface_register(&s3c2442_cpufreq_interface);
 }
 
 subsys_initcall(s3c2442_cpufreq_init);
diff --git a/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c b/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
index f105d5e..b5368ae 100644
--- a/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
+++ b/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
@@ -14,7 +14,7 @@
 
 #include <linux/types.h>
 #include <linux/kernel.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/clk.h>
 #include <linux/err.h>
 
@@ -51,7 +51,7 @@ static struct cpufreq_frequency_table s3c2440_plls_12[] __initdata = {
 	{ .frequency = 400000000,	.index = PLLVAL(0x5c, 1, 1),  }, 	/* FVco 800.000000 */
 };
 
-static int s3c2440_plls12_add(struct sys_device *dev)
+static int s3c2440_plls12_add(struct device *dev)
 {
 	struct clk *xtal_clk;
 	unsigned long xtal;
@@ -72,25 +72,29 @@ static int s3c2440_plls12_add(struct sys_device *dev)
 	return 0;
 }
 
-static struct sysdev_driver s3c2440_plls12_drv = {
-	.add	= s3c2440_plls12_add,
+static struct subsys_interface s3c2440_plls12_interface = {
+	.name		= "s3c2440_plls12",
+	.subsys		= &s3c2440_subsys,
+	.add_dev	= s3c2440_plls12_add,
 };
 
 static int __init s3c2440_pll_12mhz(void)
 {
-	return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_plls12_drv);
+	return subsys_interface_register(&s3c2440_plls12_interface);
 
 }
 
 arch_initcall(s3c2440_pll_12mhz);
 
-static struct sysdev_driver s3c2442_plls12_drv = {
-	.add	= s3c2440_plls12_add,
+static struct subsys_interface s3c2442_plls12_interface = {
+	.name		= "s3c2442_plls12",
+	.subsys		= &s3c2442_subsys,
+	.add_dev	= s3c2440_plls12_add,
 };
 
 static int __init s3c2442_pll_12mhz(void)
 {
-	return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_plls12_drv);
+	return subsys_interface_register(&s3c2442_plls12_interface);
 
 }
 
diff --git a/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c b/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
index c8a8f90..42f2b5c 100644
--- a/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
+++ b/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
@@ -14,7 +14,7 @@
 
 #include <linux/types.h>
 #include <linux/kernel.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/clk.h>
 #include <linux/err.h>
 
@@ -79,7 +79,7 @@ static struct cpufreq_frequency_table s3c2440_plls_169344[] __initdata = {
 	{ .frequency = 402192000,	.index = PLLVAL(87, 2, 1), 	}, 	/* FVco 804.384000 */
 };
 
-static int s3c2440_plls169344_add(struct sys_device *dev)
+static int s3c2440_plls169344_add(struct device *dev)
 {
 	struct clk *xtal_clk;
 	unsigned long xtal;
@@ -100,28 +100,28 @@ static int s3c2440_plls169344_add(struct sys_device *dev)
 	return 0;
 }
 
-static struct sysdev_driver s3c2440_plls169344_drv = {
-	.add	= s3c2440_plls169344_add,
+static struct subsys_interface s3c2440_plls169344_interface = {
+	.name		= "s3c2440_plls169344",
+	.subsys		= &s3c2440_subsys,
+	.add_dev	= s3c2440_plls169344_add,
 };
 
 static int __init s3c2440_pll_16934400(void)
 {
-	return sysdev_driver_register(&s3c2440_sysclass,
-				      &s3c2440_plls169344_drv);
-
+	return subsys_interface_register(&s3c2440_plls169344_interface);
 }
 
 arch_initcall(s3c2440_pll_16934400);
 
-static struct sysdev_driver s3c2442_plls169344_drv = {
-	.add	= s3c2440_plls169344_add,
+static struct subsys_interface s3c2442_plls169344_interface = {
+	.name		= "s3c2442_plls169344",
+	.subsys		= &s3c2442_subsys,
+	.add_dev	= s3c2440_plls169344_add,
 };
 
 static int __init s3c2442_pll_16934400(void)
 {
-	return sysdev_driver_register(&s3c2442_sysclass,
-				      &s3c2442_plls169344_drv);
-
+	return subsys_interface_register(&s3c2442_plls169344_interface);
 }
 
 arch_initcall(s3c2442_pll_16934400);
diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
index 37f8cc6..517623a 100644
--- a/arch/arm/mach-s3c2440/s3c2440.c
+++ b/arch/arm/mach-s3c2440/s3c2440.c
@@ -18,7 +18,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/syscore_ops.h>
 #include <linux/gpio.h>
 #include <linux/clk.h>
@@ -35,13 +35,14 @@
 #include <plat/cpu.h>
 #include <plat/s3c244x.h>
 #include <plat/pm.h>
+#include <plat/watchdog-reset.h>
 
 #include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
 #include <plat/gpio-cfg-helpers.h>
 
-static struct sys_device s3c2440_sysdev = {
-	.cls		= &s3c2440_sysclass,
+static struct device s3c2440_dev = {
+	.bus		= &s3c2440_subsys,
 };
 
 int __init s3c2440_init(void)
@@ -63,7 +64,7 @@ int __init s3c2440_init(void)
 
 	/* register our system device for everything else */
 
-	return sysdev_register(&s3c2440_sysdev);
+	return device_register(&s3c2440_dev);
 }
 
 void __init s3c2440_map_io(void)
@@ -73,3 +74,15 @@ void __init s3c2440_map_io(void)
 	s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
 	s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
 }
+
+void s3c2440_restart(char mode, const char *cmd)
+{
+	if (mode == 's') {
+		soft_restart(0);
+	}
+
+	arch_wdt_reset();
+
+	/* we'll take a jump through zero as a poor second */
+	soft_restart(0);
+}
diff --git a/arch/arm/mach-s3c2440/s3c2442.c b/arch/arm/mach-s3c2440/s3c2442.c
index 2c822e0..8004e04 100644
--- a/arch/arm/mach-s3c2440/s3c2442.c
+++ b/arch/arm/mach-s3c2440/s3c2442.c
@@ -28,7 +28,6 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/device.h>
-#include <linux/sysdev.h>
 #include <linux/syscore_ops.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
@@ -123,7 +122,7 @@ static struct clk s3c2442_clk_cam_upll = {
 	},
 };
 
-static int s3c2442_clk_add(struct sys_device *sysdev)
+static int s3c2442_clk_add(struct device *dev)
 {
 	struct clk *clock_upll;
 	struct clk *clock_h;
@@ -149,20 +148,22 @@ static int s3c2442_clk_add(struct sys_device *sysdev)
 	return 0;
 }
 
-static struct sysdev_driver s3c2442_clk_driver = {
-	.add	= s3c2442_clk_add,
+static struct subsys_interface s3c2442_clk_interface = {
+	.name		= "s3c2442_clk",
+	.subsys		= &s3c2442_subsys,
+	.add_dev	= s3c2442_clk_add,
 };
 
 static __init int s3c2442_clk_init(void)
 {
-	return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_clk_driver);
+	return subsys_interface_register(&s3c2442_clk_interface);
 }
 
 arch_initcall(s3c2442_clk_init);
 
 
-static struct sys_device s3c2442_sysdev = {
-	.cls		= &s3c2442_sysclass,
+static struct device s3c2442_dev = {
+	.bus		= &s3c2442_subsys,
 };
 
 int __init s3c2442_init(void)
@@ -175,7 +176,7 @@ int __init s3c2442_init(void)
 	register_syscore_ops(&s3c244x_pm_syscore_ops);
 	register_syscore_ops(&s3c24xx_irq_syscore_ops);
 
-	return sysdev_register(&s3c2442_sysdev);
+	return device_register(&s3c2442_dev);
 }
 
 void __init s3c2442_map_io(void)
diff --git a/arch/arm/mach-s3c2440/s3c244x-clock.c b/arch/arm/mach-s3c2440/s3c244x-clock.c
index 7f5ea0a..b3fdbdd 100644
--- a/arch/arm/mach-s3c2440/s3c244x-clock.c
+++ b/arch/arm/mach-s3c2440/s3c244x-clock.c
@@ -28,7 +28,6 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/device.h>
-#include <linux/sysdev.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/clk.h>
@@ -73,7 +72,7 @@ static struct clk clk_arm = {
 	},
 };
 
-static int s3c244x_clk_add(struct sys_device *sysdev)
+static int s3c244x_clk_add(struct device *dev)
 {
 	unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
 	unsigned long clkdivn;
@@ -115,24 +114,28 @@ static int s3c244x_clk_add(struct sys_device *sysdev)
 	return 0;
 }
 
-static struct sysdev_driver s3c2440_clk_driver = {
-	.add		= s3c244x_clk_add,
+static struct subsys_interface s3c2440_clk_interface = {
+	.name		= "s3c2440_clk",
+	.subsys		= &s3c2440_subsys,
+	.add_dev	= s3c244x_clk_add,
 };
 
 static int s3c2440_clk_init(void)
 {
-	return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_clk_driver);
+	return subsys_interface_register(&s3c2440_clk_interface);
 }
 
 arch_initcall(s3c2440_clk_init);
 
-static struct sysdev_driver s3c2442_clk_driver = {
-	.add		= s3c244x_clk_add,
+static struct subsys_interface s3c2442_clk_interface = {
+	.name		= "s3c2442_clk",
+	.subsys		= &s3c2442_subsys,
+	.add_dev	= s3c244x_clk_add,
 };
 
 static int s3c2442_clk_init(void)
 {
-	return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_clk_driver);
+	return subsys_interface_register(&s3c2442_clk_interface);
 }
 
 arch_initcall(s3c2442_clk_init);
diff --git a/arch/arm/mach-s3c2440/s3c244x-irq.c b/arch/arm/mach-s3c2440/s3c244x-irq.c
index c63e8f2..74d3dcf 100644
--- a/arch/arm/mach-s3c2440/s3c244x-irq.c
+++ b/arch/arm/mach-s3c2440/s3c244x-irq.c
@@ -23,7 +23,7 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -91,7 +91,7 @@ static struct irq_chip s3c_irq_cam = {
 	.irq_ack	= s3c_irq_cam_ack,
 };
 
-static int s3c244x_irq_add(struct sys_device *sysdev)
+static int s3c244x_irq_add(struct device *dev)
 {
 	unsigned int irqno;
 
@@ -114,25 +114,29 @@ static int s3c244x_irq_add(struct sys_device *sysdev)
 	return 0;
 }
 
-static struct sysdev_driver s3c2440_irq_driver = {
-	.add		= s3c244x_irq_add,
+static struct subsys_interface s3c2440_irq_interface = {
+	.name		= "s3c2440_irq",
+	.subsys		= &s3c2440_subsys,
+	.add_dev	= s3c244x_irq_add,
 };
 
 static int s3c2440_irq_init(void)
 {
-	return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_irq_driver);
+	return subsys_interface_register(&s3c2440_irq_interface);
 }
 
 arch_initcall(s3c2440_irq_init);
 
-static struct sysdev_driver s3c2442_irq_driver = {
-	.add		= s3c244x_irq_add,
+static struct subsys_interface s3c2442_irq_interface = {
+	.name		= "s3c2442_irq",
+	.subsys		= &s3c2442_subsys,
+	.add_dev	= s3c244x_irq_add,
 };
 
 
 static int s3c2442_irq_init(void)
 {
-	return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_irq_driver);
+	return subsys_interface_register(&s3c2442_irq_interface);
 }
 
 arch_initcall(s3c2442_irq_init);
diff --git a/arch/arm/mach-s3c2440/s3c244x.c b/arch/arm/mach-s3c2440/s3c244x.c
index 7e8a23d..36bc60f6 100644
--- a/arch/arm/mach-s3c2440/s3c244x.c
+++ b/arch/arm/mach-s3c2440/s3c244x.c
@@ -18,7 +18,7 @@
 #include <linux/init.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/syscore_ops.h>
 #include <linux/clk.h>
 #include <linux/io.h>
@@ -135,17 +135,19 @@ void __init s3c244x_init_clocks(int xtal)
 	s3c2410_baseclk_add();
 }
 
-/* Since the S3C2442 and S3C2440 share  items, put both sysclasses here */
+/* Since the S3C2442 and S3C2440 share items, put both subsystems here */
 
-struct sysdev_class s3c2440_sysclass = {
+struct bus_type s3c2440_subsys = {
 	.name		= "s3c2440-core",
+	.dev_name	= "s3c2440-core",
 };
 
-struct sysdev_class s3c2442_sysclass = {
+struct bus_type s3c2442_subsys = {
 	.name		= "s3c2442-core",
+	.dev_name	= "s3c2442-core",
 };
 
-/* need to register class before we actually register the device, and
+/* need to register the subsystem before we actually register the device, and
  * we also need to ensure that it has been initialised before any of the
  * drivers even try to use it (even if not on an s3c2440 based system)
  * as a driver which may support both 2410 and 2440 may try and use it.
@@ -153,14 +155,14 @@ struct sysdev_class s3c2442_sysclass = {
 
 static int __init s3c2440_core_init(void)
 {
-	return sysdev_class_register(&s3c2440_sysclass);
+	return subsys_system_register(&s3c2440_subsys, NULL);
 }
 
 core_initcall(s3c2440_core_init);
 
 static int __init s3c2442_core_init(void)
 {
-	return sysdev_class_register(&s3c2442_sysclass);
+	return subsys_system_register(&s3c2442_subsys, NULL);
 }
 
 core_initcall(s3c2442_core_init);
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index 1c2c088..6dde269 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -27,7 +27,7 @@
 #include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/err.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/clk.h>
 #include <linux/mutex.h>
 #include <linux/serial_core.h>
diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c
index fe52151..de6b4a2 100644
--- a/arch/arm/mach-s3c2443/dma.c
+++ b/arch/arm/mach-s3c2443/dma.c
@@ -14,7 +14,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/serial_core.h>
 #include <linux/io.h>
 
@@ -135,19 +135,21 @@ static struct s3c24xx_dma_selection __initdata s3c2443_dma_sel = {
 	.map_size	= ARRAY_SIZE(s3c2443_dma_mappings),
 };
 
-static int __init s3c2443_dma_add(struct sys_device *sysdev)
+static int __init s3c2443_dma_add(struct device *dev)
 {
 	s3c24xx_dma_init(6, IRQ_S3C2443_DMA0, 0x100);
 	return s3c24xx_dma_init_map(&s3c2443_dma_sel);
 }
 
-static struct sysdev_driver s3c2443_dma_driver = {
-	.add	= s3c2443_dma_add,
+static struct subsys_interface s3c2443_dma_interface = {
+	.name		= "s3c2443_dma",
+	.subsys		= &s3c2443_subsys,
+	.add_dev	= s3c2443_dma_add,
 };
 
 static int __init s3c2443_dma_init(void)
 {
-	return sysdev_driver_register(&s3c2443_sysclass, &s3c2443_dma_driver);
+	return subsys_interface_register(&s3c2443_dma_interface);
 }
 
 arch_initcall(s3c2443_dma_init);
diff --git a/arch/arm/mach-s3c2443/irq.c b/arch/arm/mach-s3c2443/irq.c
index 83ecb11..35e4ff2 100644
--- a/arch/arm/mach-s3c2443/irq.c
+++ b/arch/arm/mach-s3c2443/irq.c
@@ -23,7 +23,7 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -241,7 +241,7 @@ static int __init s3c2443_add_sub(unsigned int base,
 	return 0;
 }
 
-static int __init s3c2443_irq_add(struct sys_device *sysdev)
+static int __init s3c2443_irq_add(struct device *dev)
 {
 	printk("S3C2443: IRQ Support\n");
 
@@ -265,13 +265,15 @@ static int __init s3c2443_irq_add(struct sys_device *sysdev)
 	return 0;
 }
 
-static struct sysdev_driver s3c2443_irq_driver = {
-	.add		= s3c2443_irq_add,
+static struct subsys_interface s3c2443_irq_interface = {
+	.name		= "s3c2443_irq",
+	.subsys		= &s3c2443_subsys,
+	.add_dev	= s3c2443_irq_add,
 };
 
 static int __init s3c2443_irq_init(void)
 {
-	return sysdev_driver_register(&s3c2443_sysclass, &s3c2443_irq_driver);
+	return subsys_interface_register(&s3c2443_irq_interface);
 }
 
 arch_initcall(s3c2443_irq_init);
diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c
index bec107e..2092369 100644
--- a/arch/arm/mach-s3c2443/mach-smdk2443.c
+++ b/arch/arm/mach-s3c2443/mach-smdk2443.c
@@ -145,4 +145,5 @@ MACHINE_START(SMDK2443, "SMDK2443")
 	.map_io		= smdk2443_map_io,
 	.init_machine	= smdk2443_machine_init,
 	.timer		= &s3c24xx_timer,
+	.restart	= s3c2443_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c
index a22b771..b9deaeb 100644
--- a/arch/arm/mach-s3c2443/s3c2443.c
+++ b/arch/arm/mach-s3c2443/s3c2443.c
@@ -19,7 +19,7 @@
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 
@@ -31,7 +31,6 @@
 #include <asm/irq.h>
 
 #include <mach/regs-s3c2443-clock.h>
-#include <mach/reset.h>
 
 #include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
@@ -49,16 +48,20 @@ static struct map_desc s3c2443_iodesc[] __initdata = {
 	IODESC_ENT(TIMER),
 };
 
-struct sysdev_class s3c2443_sysclass = {
+struct bus_type s3c2443_subsys = {
 	.name = "s3c2443-core",
+	.dev_name = "s3c2443-core",
 };
 
-static struct sys_device s3c2443_sysdev = {
-	.cls		= &s3c2443_sysclass,
+static struct device s3c2443_dev = {
+	.bus		= &s3c2443_subsys,
 };
 
-static void s3c2443_hard_reset(void)
+void s3c2443_restart(char mode, const char *cmd)
 {
+	if (mode == 's')
+		soft_restart(0);
+
 	__raw_writel(S3C2443_SWRST_RESET, S3C2443_SWRST);
 }
 
@@ -66,8 +69,6 @@ int __init s3c2443_init(void)
 {
 	printk("S3C2443: Initialising architecture\n");
 
-	s3c24xx_reset_hook = s3c2443_hard_reset;
-
 	s3c_nand_setname("s3c2412-nand");
 	s3c_fb_setname("s3c2443-fb");
 
@@ -77,7 +78,7 @@ int __init s3c2443_init(void)
 	s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT;
 	s3c_device_wdt.resource[1].end   = IRQ_S3C2443_WDT;
 
-	return sysdev_register(&s3c2443_sysdev);
+	return device_register(&s3c2443_dev);
 }
 
 void __init s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no)
@@ -99,7 +100,7 @@ void __init s3c2443_map_io(void)
 	iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc));
 }
 
-/* need to register class before we actually register the device, and
+/* need to register the subsystem before we actually register the device, and
  * we also need to ensure that it has been initialised before any of the
  * drivers even try to use it (even if not on an s3c2443 based system)
  * as a driver which may support both 2443 and 2440 may try and use it.
@@ -107,7 +108,7 @@ void __init s3c2443_map_io(void)
 
 static int __init s3c2443_core_init(void)
 {
-	return sysdev_class_register(&s3c2443_sysclass);
+	return subsys_system_register(&s3c2443_subsys, NULL);
 }
 
 core_initcall(s3c2443_core_init);
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 5552e04..381586c 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -8,6 +8,7 @@ config PLAT_S3C64XX
 	bool
 	depends on ARCH_S3C64XX
 	select SAMSUNG_WAKEMASK
+	select PM_GENERIC_DOMAINS
 	default y
 	help
 	  Base platform code for any Samsung S3C64XX device
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index cfc0b99..f37016c 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -10,54 +10,49 @@ obj-m				:=
 obj-n				:=
 obj-				:=
 
-# Core files
-obj-y				+= cpu.o
-obj-y				+= clock.o
+# Core
 
-# Core support for S3C6400 system
+obj-y				+= common.o clock.o
+
+# Core support
 
 obj-$(CONFIG_CPU_S3C6400)	+= s3c6400.o
 obj-$(CONFIG_CPU_S3C6410)	+= s3c6410.o
 
-obj-y				+= irq.o
-obj-y				+= irq-eint.o
+# PM
+
+obj-$(CONFIG_PM)		+= pm.o irq-pm.o sleep.o
 
 # DMA support
 
 obj-$(CONFIG_S3C64XX_DMA)	+= dma.o
 
-# Device setup
+# Device support
 
-obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
-obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
-obj-$(CONFIG_S3C64XX_SETUP_IDE) += setup-ide.o
-obj-$(CONFIG_S3C64XX_SETUP_KEYPAD) += setup-keypad.o
-obj-$(CONFIG_S3C64XX_SETUP_SDHCI) += setup-sdhci.o
-obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
-obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
+obj-y				+= dev-uart.o
+obj-y				+= dev-audio.o
+obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
 
-# PM
+# Device setup
 
-obj-$(CONFIG_PM)		+= pm.o
-obj-$(CONFIG_PM)		+= sleep.o
-obj-$(CONFIG_PM)		+= irq-pm.o
+obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP)	+= setup-fb-24bpp.o
+obj-$(CONFIG_S3C64XX_SETUP_I2C0)	+= setup-i2c0.o
+obj-$(CONFIG_S3C64XX_SETUP_I2C1)	+= setup-i2c1.o
+obj-$(CONFIG_S3C64XX_SETUP_IDE)		+= setup-ide.o
+obj-$(CONFIG_S3C64XX_SETUP_KEYPAD)	+= setup-keypad.o
+obj-$(CONFIG_S3C64XX_SETUP_SDHCI)	+= setup-sdhci.o
+obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
 
 # Machine support
 
-obj-$(CONFIG_MACH_ANW6410)	+= mach-anw6410.o
-obj-$(CONFIG_MACH_SMDK6400)	+= mach-smdk6400.o
-obj-$(CONFIG_MACH_SMDK6410)	+= mach-smdk6410.o
-obj-$(CONFIG_MACH_REAL6410)     += mach-real6410.o
-obj-$(CONFIG_MACH_MINI6410)     += mach-mini6410.o
-obj-$(CONFIG_MACH_NCP)		+= mach-ncp.o
-obj-$(CONFIG_MACH_HMT)		+= mach-hmt.o
-obj-$(CONFIG_MACH_SMARTQ)	+= mach-smartq.o
-obj-$(CONFIG_MACH_SMARTQ5)	+= mach-smartq5.o
-obj-$(CONFIG_MACH_SMARTQ7)	+= mach-smartq7.o
-obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o
-
-# device support
-
-obj-y				+= dev-uart.o
-obj-y				+= dev-audio.o
-obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
+obj-$(CONFIG_MACH_ANW6410)		+= mach-anw6410.o
+obj-$(CONFIG_MACH_HMT)			+= mach-hmt.o
+obj-$(CONFIG_MACH_MINI6410)		+= mach-mini6410.o
+obj-$(CONFIG_MACH_NCP)			+= mach-ncp.o
+obj-$(CONFIG_MACH_REAL6410)		+= mach-real6410.o
+obj-$(CONFIG_MACH_SMARTQ)		+= mach-smartq.o
+obj-$(CONFIG_MACH_SMARTQ5)		+= mach-smartq5.o
+obj-$(CONFIG_MACH_SMARTQ7)		+= mach-smartq7.o
+obj-$(CONFIG_MACH_SMDK6400)		+= mach-smdk6400.o
+obj-$(CONFIG_MACH_SMDK6410)		+= mach-smdk6410.o
+obj-$(CONFIG_MACH_WLF_CRAGG_6410)	+= mach-crag6410.o mach-crag6410-module.o
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
index 39c238d..625219b 100644
--- a/arch/arm/mach-s3c64xx/clock.c
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -705,7 +705,7 @@ static struct clksrc_clk *init_parents[] = {
 
 #define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
 
-void __init_or_cpufreq s3c6400_setup_clocks(void)
+void __init_or_cpufreq s3c64xx_setup_clocks(void)
 {
 	struct clk *xtal_clk;
 	unsigned long xtal;
@@ -804,7 +804,7 @@ static struct clk *clks[] __initdata = {
  * as ARMCLK as well as the necessary parent clocks.
  *
  * This call does not setup the clocks, which is left to the
- * s3c6400_setup_clocks() call which may be needed by the cpufreq
+ * s3c64xx_setup_clocks() call which may be needed by the cpufreq
  * or resume code to re-set the clocks if the bootloader has changed
  * them.
  */
diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c
new file mode 100644
index 0000000..4a7394d
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/common.c
@@ -0,0 +1,385 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * Common Codes for S3C64XX machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/hardware/vic.h>
+
+#include <mach/map.h>
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/pm.h>
+#include <plat/gpio-cfg.h>
+#include <plat/irq-uart.h>
+#include <plat/irq-vic-timer.h>
+#include <plat/regs-irqtype.h>
+#include <plat/regs-serial.h>
+#include <plat/watchdog-reset.h>
+
+#include "common.h"
+
+/* uart registration process */
+
+void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no);
+}
+
+/* table of supported CPUs */
+
+static const char name_s3c6400[] = "S3C6400";
+static const char name_s3c6410[] = "S3C6410";
+
+static struct cpu_table cpu_ids[] __initdata = {
+	{
+		.idcode		= S3C6400_CPU_ID,
+		.idmask		= S3C64XX_CPU_MASK,
+		.map_io		= s3c6400_map_io,
+		.init_clocks	= s3c6400_init_clocks,
+		.init_uarts	= s3c64xx_init_uarts,
+		.init		= s3c6400_init,
+		.name		= name_s3c6400,
+	}, {
+		.idcode		= S3C6410_CPU_ID,
+		.idmask		= S3C64XX_CPU_MASK,
+		.map_io		= s3c6410_map_io,
+		.init_clocks	= s3c6410_init_clocks,
+		.init_uarts	= s3c64xx_init_uarts,
+		.init		= s3c6410_init,
+		.name		= name_s3c6410,
+	},
+};
+
+/* minimal IO mapping */
+
+/* see notes on uart map in arch/arm/mach-s3c64xx/include/mach/debug-macro.S */
+#define UART_OFFS (S3C_PA_UART & 0xfffff)
+
+static struct map_desc s3c_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S3C_VA_SYS,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_SYSCON),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_MEM,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_SROM),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)(S3C_VA_UART + UART_OFFS),
+		.pfn		= __phys_to_pfn(S3C_PA_UART),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC0,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_VIC0),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC1,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_VIC1),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_TIMER,
+		.pfn		= __phys_to_pfn(S3C_PA_TIMER),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C64XX_VA_GPIO,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_GPIO),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C64XX_VA_MODEM,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_MODEM),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_WATCHDOG,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_WATCHDOG),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_USB_HSPHY,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_USB_HSPHY),
+		.length		= SZ_1K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static struct bus_type s3c64xx_subsys = {
+	.name		= "s3c64xx-core",
+	.dev_name	= "s3c64xx-core",
+};
+
+static struct device s3c64xx_dev = {
+	.bus	= &s3c64xx_subsys,
+};
+
+/* read cpu identification code */
+
+void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
+{
+	/* initialise the io descriptors we need for initialisation */
+	iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
+	iotable_init(mach_desc, size);
+	init_consistent_dma_size(SZ_8M);
+
+	/* detect cpu id */
+	s3c64xx_init_cpu();
+
+	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+}
+
+static __init int s3c64xx_dev_init(void)
+{
+	subsys_system_register(&s3c64xx_subsys, NULL);
+	return device_register(&s3c64xx_dev);
+}
+core_initcall(s3c64xx_dev_init);
+
+/*
+ * setup the sources the vic should advertise resume
+ * for, even though it is not doing the wake
+ * (set_irq_wake needs to be valid)
+ */
+#define IRQ_VIC0_RESUME (1 << (IRQ_RTC_TIC - IRQ_VIC0_BASE))
+#define IRQ_VIC1_RESUME (1 << (IRQ_RTC_ALARM - IRQ_VIC1_BASE) |	\
+			 1 << (IRQ_PENDN - IRQ_VIC1_BASE) |	\
+			 1 << (IRQ_HSMMC0 - IRQ_VIC1_BASE) |	\
+			 1 << (IRQ_HSMMC1 - IRQ_VIC1_BASE) |	\
+			 1 << (IRQ_HSMMC2 - IRQ_VIC1_BASE))
+
+void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
+{
+	printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
+
+	/* initialise the pair of VICs */
+	vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, IRQ_VIC0_RESUME);
+	vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, IRQ_VIC1_RESUME);
+
+	/* add the timer sub-irqs */
+	s3c_init_vic_timer_irq(5, IRQ_TIMER0);
+}
+
+#define eint_offset(irq)	((irq) - IRQ_EINT(0))
+#define eint_irq_to_bit(irq)	((u32)(1 << eint_offset(irq)))
+
+static inline void s3c_irq_eint_mask(struct irq_data *data)
+{
+	u32 mask;
+
+	mask = __raw_readl(S3C64XX_EINT0MASK);
+	mask |= (u32)data->chip_data;
+	__raw_writel(mask, S3C64XX_EINT0MASK);
+}
+
+static void s3c_irq_eint_unmask(struct irq_data *data)
+{
+	u32 mask;
+
+	mask = __raw_readl(S3C64XX_EINT0MASK);
+	mask &= ~((u32)data->chip_data);
+	__raw_writel(mask, S3C64XX_EINT0MASK);
+}
+
+static inline void s3c_irq_eint_ack(struct irq_data *data)
+{
+	__raw_writel((u32)data->chip_data, S3C64XX_EINT0PEND);
+}
+
+static void s3c_irq_eint_maskack(struct irq_data *data)
+{
+	/* compiler should in-line these */
+	s3c_irq_eint_mask(data);
+	s3c_irq_eint_ack(data);
+}
+
+static int s3c_irq_eint_set_type(struct irq_data *data, unsigned int type)
+{
+	int offs = eint_offset(data->irq);
+	int pin, pin_val;
+	int shift;
+	u32 ctrl, mask;
+	u32 newvalue = 0;
+	void __iomem *reg;
+
+	if (offs > 27)
+		return -EINVAL;
+
+	if (offs <= 15)
+		reg = S3C64XX_EINT0CON0;
+	else
+		reg = S3C64XX_EINT0CON1;
+
+	switch (type) {
+	case IRQ_TYPE_NONE:
+		printk(KERN_WARNING "No edge setting!\n");
+		break;
+
+	case IRQ_TYPE_EDGE_RISING:
+		newvalue = S3C2410_EXTINT_RISEEDGE;
+		break;
+
+	case IRQ_TYPE_EDGE_FALLING:
+		newvalue = S3C2410_EXTINT_FALLEDGE;
+		break;
+
+	case IRQ_TYPE_EDGE_BOTH:
+		newvalue = S3C2410_EXTINT_BOTHEDGE;
+		break;
+
+	case IRQ_TYPE_LEVEL_LOW:
+		newvalue = S3C2410_EXTINT_LOWLEV;
+		break;
+
+	case IRQ_TYPE_LEVEL_HIGH:
+		newvalue = S3C2410_EXTINT_HILEV;
+		break;
+
+	default:
+		printk(KERN_ERR "No such irq type %d", type);
+		return -1;
+	}
+
+	if (offs <= 15)
+		shift = (offs / 2) * 4;
+	else
+		shift = ((offs - 16) / 2) * 4;
+	mask = 0x7 << shift;
+
+	ctrl = __raw_readl(reg);
+	ctrl &= ~mask;
+	ctrl |= newvalue << shift;
+	__raw_writel(ctrl, reg);
+
+	/* set the GPIO pin appropriately */
+
+	if (offs < 16) {
+		pin = S3C64XX_GPN(offs);
+		pin_val = S3C_GPIO_SFN(2);
+	} else if (offs < 23) {
+		pin = S3C64XX_GPL(offs + 8 - 16);
+		pin_val = S3C_GPIO_SFN(3);
+	} else {
+		pin = S3C64XX_GPM(offs - 23);
+		pin_val = S3C_GPIO_SFN(3);
+	}
+
+	s3c_gpio_cfgpin(pin, pin_val);
+
+	return 0;
+}
+
+static struct irq_chip s3c_irq_eint = {
+	.name		= "s3c-eint",
+	.irq_mask	= s3c_irq_eint_mask,
+	.irq_unmask	= s3c_irq_eint_unmask,
+	.irq_mask_ack	= s3c_irq_eint_maskack,
+	.irq_ack	= s3c_irq_eint_ack,
+	.irq_set_type	= s3c_irq_eint_set_type,
+	.irq_set_wake	= s3c_irqext_wake,
+};
+
+/* s3c_irq_demux_eint
+ *
+ * This function demuxes the IRQ from the group0 external interrupts,
+ * from IRQ_EINT(0) to IRQ_EINT(27). It is designed to be inlined into
+ * the specific handlers s3c_irq_demux_eintX_Y.
+ */
+static inline void s3c_irq_demux_eint(unsigned int start, unsigned int end)
+{
+	u32 status = __raw_readl(S3C64XX_EINT0PEND);
+	u32 mask = __raw_readl(S3C64XX_EINT0MASK);
+	unsigned int irq;
+
+	status &= ~mask;
+	status >>= start;
+	status &= (1 << (end - start + 1)) - 1;
+
+	for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
+		if (status & 1)
+			generic_handle_irq(irq);
+
+		status >>= 1;
+	}
+}
+
+static void s3c_irq_demux_eint0_3(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_eint(0, 3);
+}
+
+static void s3c_irq_demux_eint4_11(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_eint(4, 11);
+}
+
+static void s3c_irq_demux_eint12_19(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_eint(12, 19);
+}
+
+static void s3c_irq_demux_eint20_27(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_eint(20, 27);
+}
+
+static int __init s3c64xx_init_irq_eint(void)
+{
+	int irq;
+
+	for (irq = IRQ_EINT(0); irq <= IRQ_EINT(27); irq++) {
+		irq_set_chip_and_handler(irq, &s3c_irq_eint, handle_level_irq);
+		irq_set_chip_data(irq, (void *)eint_irq_to_bit(irq));
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+	irq_set_chained_handler(IRQ_EINT0_3, s3c_irq_demux_eint0_3);
+	irq_set_chained_handler(IRQ_EINT4_11, s3c_irq_demux_eint4_11);
+	irq_set_chained_handler(IRQ_EINT12_19, s3c_irq_demux_eint12_19);
+	irq_set_chained_handler(IRQ_EINT20_27, s3c_irq_demux_eint20_27);
+
+	return 0;
+}
+arch_initcall(s3c64xx_init_irq_eint);
+
+void s3c64xx_restart(char mode, const char *cmd)
+{
+	if (mode != 's')
+		arch_wdt_reset();
+
+	/* if all else fails, or mode was for soft, jump to 0 */
+	soft_restart(0);
+}
diff --git a/arch/arm/mach-s3c64xx/common.h b/arch/arm/mach-s3c64xx/common.h
new file mode 100644
index 0000000..5eb9c9a
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/common.h
@@ -0,0 +1,56 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * Common Header for S3C64XX machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_S3C64XX_COMMON_H
+#define __ARCH_ARM_MACH_S3C64XX_COMMON_H
+
+void s3c64xx_init_irq(u32 vic0, u32 vic1);
+void s3c64xx_init_io(struct map_desc *mach_desc, int size);
+
+void s3c64xx_register_clocks(unsigned long xtal, unsigned armclk_limit);
+void s3c64xx_setup_clocks(void);
+
+void s3c64xx_restart(char mode, const char *cmd);
+
+extern struct syscore_ops s3c64xx_irq_syscore_ops;
+
+#ifdef CONFIG_CPU_S3C6400
+
+extern  int s3c6400_init(void);
+extern void s3c6400_init_irq(void);
+extern void s3c6400_map_io(void);
+extern void s3c6400_init_clocks(int xtal);
+
+#else
+#define s3c6400_init_clocks NULL
+#define s3c6400_map_io NULL
+#define s3c6400_init NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C6410
+
+extern  int s3c6410_init(void);
+extern void s3c6410_init_irq(void);
+extern void s3c6410_map_io(void);
+extern void s3c6410_init_clocks(int xtal);
+
+#else
+#define s3c6410_init_clocks NULL
+#define s3c6410_map_io NULL
+#define s3c6410_init NULL
+#endif
+
+#endif /* __ARCH_ARM_MACH_S3C64XX_COMMON_H */
diff --git a/arch/arm/mach-s3c64xx/cpu.c b/arch/arm/mach-s3c64xx/cpu.c
deleted file mode 100644
index de085b7..0000000
--- a/arch/arm/mach-s3c64xx/cpu.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/cpu.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C64XX CPU Support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/sysdev.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/dma-mapping.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <plat/regs-serial.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-
-#include <plat/s3c6400.h>
-#include <plat/s3c6410.h>
-
-/* table of supported CPUs */
-
-static const char name_s3c6400[] = "S3C6400";
-static const char name_s3c6410[] = "S3C6410";
-
-static struct cpu_table cpu_ids[] __initdata = {
-	{
-		.idcode		= S3C6400_CPU_ID,
-		.idmask		= S3C64XX_CPU_MASK,
-		.map_io		= s3c6400_map_io,
-		.init_clocks	= s3c6400_init_clocks,
-		.init_uarts	= s3c6400_init_uarts,
-		.init		= s3c6400_init,
-		.name		= name_s3c6400,
-	}, {
-		.idcode		= S3C6410_CPU_ID,
-		.idmask		= S3C64XX_CPU_MASK,
-		.map_io		= s3c6410_map_io,
-		.init_clocks	= s3c6410_init_clocks,
-		.init_uarts	= s3c6410_init_uarts,
-		.init		= s3c6410_init,
-		.name		= name_s3c6410,
-	},
-};
-
-/* minimal IO mapping */
-
-/* see notes on uart map in arch/arm/mach-s3c6400/include/mach/debug-macro.S */
-#define UART_OFFS (S3C_PA_UART & 0xfffff)
-
-static struct map_desc s3c_iodesc[] __initdata = {
-	{
-		.virtual	= (unsigned long)S3C_VA_SYS,
-		.pfn		= __phys_to_pfn(S3C64XX_PA_SYSCON),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_MEM,
-		.pfn		= __phys_to_pfn(S3C64XX_PA_SROM),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)(S3C_VA_UART + UART_OFFS),
-		.pfn		= __phys_to_pfn(S3C_PA_UART),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)VA_VIC0,
-		.pfn		= __phys_to_pfn(S3C64XX_PA_VIC0),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)VA_VIC1,
-		.pfn		= __phys_to_pfn(S3C64XX_PA_VIC1),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_TIMER,
-		.pfn		= __phys_to_pfn(S3C_PA_TIMER),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C64XX_VA_GPIO,
-		.pfn		= __phys_to_pfn(S3C64XX_PA_GPIO),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C64XX_VA_MODEM,
-		.pfn		= __phys_to_pfn(S3C64XX_PA_MODEM),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_WATCHDOG,
-		.pfn		= __phys_to_pfn(S3C64XX_PA_WATCHDOG),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_USB_HSPHY,
-		.pfn		= __phys_to_pfn(S3C64XX_PA_USB_HSPHY),
-		.length		= SZ_1K,
-		.type		= MT_DEVICE,
-	},
-};
-
-
-struct sysdev_class s3c64xx_sysclass = {
-	.name	= "s3c64xx-core",
-};
-
-static struct sys_device s3c64xx_sysdev = {
-	.cls	= &s3c64xx_sysclass,
-};
-
-/* uart registration process */
-
-void __init s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no);
-}
-
-/* read cpu identification code */
-
-void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
-{
-	/* initialise the io descriptors we need for initialisation */
-	iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
-	iotable_init(mach_desc, size);
-	init_consistent_dma_size(SZ_8M);
-
-	/* detect cpu id */
-	s3c64xx_init_cpu();
-
-	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
-}
-
-static __init int s3c64xx_sysdev_init(void)
-{
-	sysdev_class_register(&s3c64xx_sysclass);
-	return sysdev_register(&s3c64xx_sysdev);
-}
-
-core_initcall(s3c64xx_sysdev_init);
diff --git a/arch/arm/mach-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c
index 5e6b420..3341fd1 100644
--- a/arch/arm/mach-s3c64xx/dev-spi.c
+++ b/arch/arm/mach-s3c64xx/dev-spi.c
@@ -10,6 +10,7 @@
 
 #include <linux/kernel.h>
 #include <linux/string.h>
+#include <linux/export.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/gpio.h>
diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c
index 17d62f4..f2a7a17 100644
--- a/arch/arm/mach-s3c64xx/dma.c
+++ b/arch/arm/mach-s3c64xx/dma.c
@@ -16,7 +16,7 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/dmapool.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/errno.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
@@ -35,7 +35,7 @@
 /* dma channel state information */
 
 struct s3c64xx_dmac {
-	struct sys_device	 sysdev;
+	struct device		dev;
 	struct clk		*clk;
 	void __iomem		*regs;
 	struct s3c2410_dma_chan *channels;
@@ -631,8 +631,9 @@ static irqreturn_t s3c64xx_dma_irq(int irq, void *pw)
 	return IRQ_HANDLED;
 }
 
-static struct sysdev_class dma_sysclass = {
+static struct bus_type dma_subsys = {
 	.name		= "s3c64xx-dma",
+	.dev_name	= "s3c64xx-dma",
 };
 
 static int s3c64xx_dma_init1(int chno, enum dma_ch chbase,
@@ -651,12 +652,12 @@ static int s3c64xx_dma_init1(int chno, enum dma_ch chbase,
 		return -ENOMEM;
 	}
 
-	dmac->sysdev.id = chno / 8;
-	dmac->sysdev.cls = &dma_sysclass;
+	dmac->dev.id = chno / 8;
+	dmac->dev.bus = &dma_subsys;
 
-	err = sysdev_register(&dmac->sysdev);
+	err = device_register(&dmac->dev);
 	if (err) {
-		printk(KERN_ERR "%s: failed to register sysdevice\n", __func__);
+		printk(KERN_ERR "%s: failed to register device\n", __func__);
 		goto err_alloc;
 	}
 
@@ -667,7 +668,7 @@ static int s3c64xx_dma_init1(int chno, enum dma_ch chbase,
 		goto err_dev;
 	}
 
-	snprintf(clkname, sizeof(clkname), "dma%d", dmac->sysdev.id);
+	snprintf(clkname, sizeof(clkname), "dma%d", dmac->dev.id);
 
 	dmac->clk = clk_get(NULL, clkname);
 	if (IS_ERR(dmac->clk)) {
@@ -715,7 +716,7 @@ err_clk:
 err_map:
 	iounmap(regs);
 err_dev:
-	sysdev_unregister(&dmac->sysdev);
+	device_unregister(&dmac->dev);
 err_alloc:
 	kfree(dmac);
 	return err;
@@ -733,9 +734,9 @@ static int __init s3c64xx_dma_init(void)
 		return -ENOMEM;
 	}
 
-	ret = sysdev_class_register(&dma_sysclass);
+	ret = subsys_system_register(&dma_subsys, NULL);
 	if (ret) {
-		printk(KERN_ERR "%s: failed to create sysclass\n", __func__);
+		printk(KERN_ERR "%s: failed to create subsys\n", __func__);
 		return -ENOMEM;
 	}
 
diff --git a/arch/arm/mach-s3c64xx/include/mach/entry-macro.S b/arch/arm/mach-s3c64xx/include/mach/entry-macro.S
index dd36260..dc2bc15 100644
--- a/arch/arm/mach-s3c64xx/include/mach/entry-macro.S
+++ b/arch/arm/mach-s3c64xx/include/mach/entry-macro.S
@@ -12,7 +12,8 @@
  * warranty of any kind, whether express or implied.
 */
 
-#include <mach/map.h>
-#include <mach/irqs.h>
+		.macro  disable_fiq
+		.endm
 
-#include <asm/entry-macro-vic2.S>
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
diff --git a/arch/arm/mach-s3c64xx/include/mach/system.h b/arch/arm/mach-s3c64xx/include/mach/system.h
index 2e58cb7..353ed43 100644
--- a/arch/arm/mach-s3c64xx/include/mach/system.h
+++ b/arch/arm/mach-s3c64xx/include/mach/system.h
@@ -11,20 +11,9 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H __FILE__
 
-#include <plat/watchdog-reset.h>
-
 static void arch_idle(void)
 {
 	/* nothing here yet */
 }
 
-static void arch_reset(char mode, const char *cmd)
-{
-	if (mode != 's')
-		arch_wdt_reset();
-
-	/* if all else fails, or mode was for soft, jump to 0 */
-	cpu_reset(0);
-}
-
 #endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/vmalloc.h b/arch/arm/mach-s3c64xx/include/mach/vmalloc.h
deleted file mode 100644
index 23f75e5..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* arch/arm/mach-s3c64xx/include/mach/vmalloc.h
- *
- * from arch/arm/mach-iop3xx/include/mach/vmalloc.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C6400 vmalloc definition
-*/
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END	0xF6000000UL
-
-#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s3c64xx/irq-eint.c b/arch/arm/mach-s3c64xx/irq-eint.c
deleted file mode 100644
index 4d203be..0000000
--- a/arch/arm/mach-s3c64xx/irq-eint.c
+++ /dev/null
@@ -1,213 +0,0 @@
-/* arch/arm/plat-s3c64xx/irq-eint.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C64XX - Interrupt handling for IRQ_EINT(x)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/sysdev.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <asm/hardware/vic.h>
-
-#include <plat/regs-irqtype.h>
-#include <mach/regs-gpio.h>
-#include <plat/gpio-cfg.h>
-
-#include <mach/map.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-
-#define eint_offset(irq)	((irq) - IRQ_EINT(0))
-#define eint_irq_to_bit(irq)	((u32)(1 << eint_offset(irq)))
-
-static inline void s3c_irq_eint_mask(struct irq_data *data)
-{
-	u32 mask;
-
-	mask = __raw_readl(S3C64XX_EINT0MASK);
-	mask |= (u32)data->chip_data;
-	__raw_writel(mask, S3C64XX_EINT0MASK);
-}
-
-static void s3c_irq_eint_unmask(struct irq_data *data)
-{
-	u32 mask;
-
-	mask = __raw_readl(S3C64XX_EINT0MASK);
-	mask &= ~((u32)data->chip_data);
-	__raw_writel(mask, S3C64XX_EINT0MASK);
-}
-
-static inline void s3c_irq_eint_ack(struct irq_data *data)
-{
-	__raw_writel((u32)data->chip_data, S3C64XX_EINT0PEND);
-}
-
-static void s3c_irq_eint_maskack(struct irq_data *data)
-{
-	/* compiler should in-line these */
-	s3c_irq_eint_mask(data);
-	s3c_irq_eint_ack(data);
-}
-
-static int s3c_irq_eint_set_type(struct irq_data *data, unsigned int type)
-{
-	int offs = eint_offset(data->irq);
-	int pin, pin_val;
-	int shift;
-	u32 ctrl, mask;
-	u32 newvalue = 0;
-	void __iomem *reg;
-
-	if (offs > 27)
-		return -EINVAL;
-
-	if (offs <= 15)
-		reg = S3C64XX_EINT0CON0;
-	else
-		reg = S3C64XX_EINT0CON1;
-
-	switch (type) {
-	case IRQ_TYPE_NONE:
-		printk(KERN_WARNING "No edge setting!\n");
-		break;
-
-	case IRQ_TYPE_EDGE_RISING:
-		newvalue = S3C2410_EXTINT_RISEEDGE;
-		break;
-
-	case IRQ_TYPE_EDGE_FALLING:
-		newvalue = S3C2410_EXTINT_FALLEDGE;
-		break;
-
-	case IRQ_TYPE_EDGE_BOTH:
-		newvalue = S3C2410_EXTINT_BOTHEDGE;
-		break;
-
-	case IRQ_TYPE_LEVEL_LOW:
-		newvalue = S3C2410_EXTINT_LOWLEV;
-		break;
-
-	case IRQ_TYPE_LEVEL_HIGH:
-		newvalue = S3C2410_EXTINT_HILEV;
-		break;
-
-	default:
-		printk(KERN_ERR "No such irq type %d", type);
-		return -1;
-	}
-
-	if (offs <= 15)
-		shift = (offs / 2) * 4;
-	else
-		shift = ((offs - 16) / 2) * 4;
-	mask = 0x7 << shift;
-
-	ctrl = __raw_readl(reg);
-	ctrl &= ~mask;
-	ctrl |= newvalue << shift;
-	__raw_writel(ctrl, reg);
-
-	/* set the GPIO pin appropriately */
-
-	if (offs < 16) {
-		pin = S3C64XX_GPN(offs);
-		pin_val = S3C_GPIO_SFN(2);
-	} else if (offs < 23) {
-		pin = S3C64XX_GPL(offs + 8 - 16);
-		pin_val = S3C_GPIO_SFN(3);
-	} else {
-		pin = S3C64XX_GPM(offs - 23);
-		pin_val = S3C_GPIO_SFN(3);
-	}
-
-	s3c_gpio_cfgpin(pin, pin_val);
-
-	return 0;
-}
-
-static struct irq_chip s3c_irq_eint = {
-	.name		= "s3c-eint",
-	.irq_mask	= s3c_irq_eint_mask,
-	.irq_unmask	= s3c_irq_eint_unmask,
-	.irq_mask_ack	= s3c_irq_eint_maskack,
-	.irq_ack	= s3c_irq_eint_ack,
-	.irq_set_type	= s3c_irq_eint_set_type,
-	.irq_set_wake	= s3c_irqext_wake,
-};
-
-/* s3c_irq_demux_eint
- *
- * This function demuxes the IRQ from the group0 external interrupts,
- * from IRQ_EINT(0) to IRQ_EINT(27). It is designed to be inlined into
- * the specific handlers s3c_irq_demux_eintX_Y.
- */
-static inline void s3c_irq_demux_eint(unsigned int start, unsigned int end)
-{
-	u32 status = __raw_readl(S3C64XX_EINT0PEND);
-	u32 mask = __raw_readl(S3C64XX_EINT0MASK);
-	unsigned int irq;
-
-	status &= ~mask;
-	status >>= start;
-	status &= (1 << (end - start + 1)) - 1;
-
-	for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
-		if (status & 1)
-			generic_handle_irq(irq);
-
-		status >>= 1;
-	}
-}
-
-static void s3c_irq_demux_eint0_3(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_eint(0, 3);
-}
-
-static void s3c_irq_demux_eint4_11(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_eint(4, 11);
-}
-
-static void s3c_irq_demux_eint12_19(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_eint(12, 19);
-}
-
-static void s3c_irq_demux_eint20_27(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_eint(20, 27);
-}
-
-static int __init s3c64xx_init_irq_eint(void)
-{
-	int irq;
-
-	for (irq = IRQ_EINT(0); irq <= IRQ_EINT(27); irq++) {
-		irq_set_chip_and_handler(irq, &s3c_irq_eint, handle_level_irq);
-		irq_set_chip_data(irq, (void *)eint_irq_to_bit(irq));
-		set_irq_flags(irq, IRQF_VALID);
-	}
-
-	irq_set_chained_handler(IRQ_EINT0_3, s3c_irq_demux_eint0_3);
-	irq_set_chained_handler(IRQ_EINT4_11, s3c_irq_demux_eint4_11);
-	irq_set_chained_handler(IRQ_EINT12_19, s3c_irq_demux_eint12_19);
-	irq_set_chained_handler(IRQ_EINT20_27, s3c_irq_demux_eint20_27);
-
-	return 0;
-}
-
-arch_initcall(s3c64xx_init_irq_eint);
diff --git a/arch/arm/mach-s3c64xx/irq.c b/arch/arm/mach-s3c64xx/irq.c
deleted file mode 100644
index b07357e..0000000
--- a/arch/arm/mach-s3c64xx/irq.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/* arch/arm/plat-s3c64xx/irq.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C64XX - Interrupt handling
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/serial_core.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <asm/hardware/vic.h>
-
-#include <mach/map.h>
-#include <plat/irq-vic-timer.h>
-#include <plat/irq-uart.h>
-#include <plat/cpu.h>
-
-/* setup the sources the vic should advertise resume for, even though it
- * is not doing the wake (set_irq_wake needs to be valid) */
-#define IRQ_VIC0_RESUME (1 << (IRQ_RTC_TIC - IRQ_VIC0_BASE))
-#define IRQ_VIC1_RESUME (1 << (IRQ_RTC_ALARM - IRQ_VIC1_BASE) |	\
-			 1 << (IRQ_PENDN - IRQ_VIC1_BASE) |	\
-			 1 << (IRQ_HSMMC0 - IRQ_VIC1_BASE) |	\
-			 1 << (IRQ_HSMMC1 - IRQ_VIC1_BASE) |	\
-			 1 << (IRQ_HSMMC2 - IRQ_VIC1_BASE))
-
-void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
-{
-	printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
-
-	/* initialise the pair of VICs */
-	vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, IRQ_VIC0_RESUME);
-	vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, IRQ_VIC1_RESUME);
-
-	/* add the timer sub-irqs */
-	s3c_init_vic_timer_irq(5, IRQ_TIMER0);
-}
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index 8eba88e..b86f277 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -30,6 +30,7 @@
 
 #include <video/platform_lcd.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
@@ -45,13 +46,14 @@
 #include <plat/fb.h>
 #include <plat/regs-fb-v4.h>
 
-#include <plat/s3c6410.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-modem.h>
 
+#include "common.h"
+
 /* DM9000 */
 #define ANW6410_PA_DM9000	(0x18000000)
 
@@ -236,7 +238,9 @@ MACHINE_START(ANW6410, "A&W6410")
 	.atag_offset	= 0x100,
 
 	.init_irq	= s3c6410_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.map_io		= anw6410_map_io,
 	.init_machine	= anw6410_machine_init,
 	.timer		= &s3c24xx_timer,
+	.restart	= s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index 6666856..f208154 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -8,7 +8,7 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
 
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index d04b654..fb786b6 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -37,6 +37,7 @@
 #include <linux/mfd/wm831x/irq.h>
 #include <linux/mfd/wm831x/gpio.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
@@ -50,7 +51,6 @@
 
 #include <mach/regs-gpio-memport.h>
 
-#include <plat/s3c6410.h>
 #include <plat/regs-serial.h>
 #include <plat/regs-fb-v4.h>
 #include <plat/fb.h>
@@ -66,6 +66,8 @@
 #include <plat/iic.h>
 #include <plat/pm.h>
 
+#include "common.h"
+
 /* serial port setup */
 
 #define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
@@ -704,14 +706,16 @@ static void __init crag6410_machine_init(void)
 
 	regulator_has_full_constraints();
 
-	s3c_pm_init();
+	s3c64xx_pm_init();
 }
 
 MACHINE_START(WLF_CRAGG_6410, "Wolfson Cragganmore 6410")
 	/* Maintainer: Mark Brown <broonie@opensource.wolfsonmicro.com> */
 	.atag_offset	= 0x100,
 	.init_irq	= s3c6410_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.map_io		= crag6410_map_io,
 	.init_machine	= crag6410_machine_init,
 	.timer		= &s3c24xx_timer,
+	.restart	= s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index 952f75f..521e07b 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -29,6 +29,7 @@
 #include <mach/hardware.h>
 #include <mach/map.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
@@ -37,12 +38,13 @@
 #include <plat/fb.h>
 #include <plat/nand.h>
 
-#include <plat/s3c6410.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/regs-fb-v4.h>
 
+#include "common.h"
+
 #define UCON S3C2410_UCON_DEFAULT
 #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
 #define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
@@ -267,7 +269,9 @@ MACHINE_START(HMT, "Airgoo-HMT")
 	/* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */
 	.atag_offset	= 0x100,
 	.init_irq	= s3c6410_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.map_io		= hmt_map_io,
 	.init_machine	= hmt_machine_init,
 	.timer		= &s3c24xx_timer,
+	.restart	= s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index 1bc85c3..c34c2ab 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -24,6 +24,7 @@
 #include <linux/serial_core.h>
 #include <linux/types.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -33,7 +34,6 @@
 #include <mach/regs-modem.h>
 #include <mach/regs-srom.h>
 
-#include <plat/s3c6410.h>
 #include <plat/adc.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
@@ -45,6 +45,8 @@
 
 #include <video/platform_lcd.h>
 
+#include "common.h"
+
 #define UCON S3C2410_UCON_DEFAULT
 #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
 #define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
@@ -345,7 +347,9 @@ MACHINE_START(MINI6410, "MINI6410")
 	/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
 	.atag_offset	= 0x100,
 	.init_irq	= s3c6410_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.map_io		= mini6410_map_io,
 	.init_machine	= mini6410_machine_init,
 	.timer		= &s3c24xx_timer,
+	.restart	= s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index cb13cba..0efa2ba 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -25,6 +25,7 @@
 
 #include <video/platform_lcd.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
@@ -39,12 +40,13 @@
 #include <plat/iic.h>
 #include <plat/fb.h>
 
-#include <plat/s3c6410.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/regs-fb-v4.h>
 
+#include "common.h"
+
 #define UCON S3C2410_UCON_DEFAULT
 #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE
 #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
@@ -99,7 +101,9 @@ MACHINE_START(NCP, "NCP")
 	/* Maintainer: Samsung Electronics */
 	.atag_offset	= 0x100,
 	.init_irq	= s3c6410_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.map_io		= ncp_map_io,
 	.init_machine	= ncp_machine_init,
 	.timer		= &s3c24xx_timer,
+	.restart	= s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index 87281e4..be2a9a2 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -25,6 +25,7 @@
 #include <linux/serial_core.h>
 #include <linux/types.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -34,7 +35,6 @@
 #include <mach/regs-modem.h>
 #include <mach/regs-srom.h>
 
-#include <plat/s3c6410.h>
 #include <plat/adc.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
@@ -46,6 +46,8 @@
 
 #include <video/platform_lcd.h>
 
+#include "common.h"
+
 #define UCON S3C2410_UCON_DEFAULT
 #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
 #define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
@@ -326,7 +328,9 @@ MACHINE_START(REAL6410, "REAL6410")
 	.atag_offset	= 0x100,
 
 	.init_irq	= s3c6410_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.map_io		= real6410_map_io,
 	.init_machine	= real6410_machine_init,
 	.timer		= &s3c24xx_timer,
+	.restart	= s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index cb1ebeb..ce31db1 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -40,6 +40,8 @@
 
 #include <video/platform_lcd.h>
 
+#include "common.h"
+
 #define UCON S3C2410_UCON_DEFAULT
 #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
 #define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c
index 94c831d..3f42431 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq5.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq5.c
@@ -17,19 +17,20 @@
 #include <linux/leds.h>
 #include <linux/platform_device.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
 #include <mach/map.h>
 #include <mach/regs-gpio.h>
 
-#include <plat/s3c6410.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/fb.h>
 #include <plat/gpio-cfg.h>
 #include <plat/regs-fb-v4.h>
 
+#include "common.h"
 #include "mach-smartq.h"
 
 static struct gpio_led smartq5_leds[] = {
@@ -148,7 +149,9 @@ MACHINE_START(SMARTQ5, "SmartQ 5")
 	/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
 	.atag_offset	= 0x100,
 	.init_irq	= s3c6410_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.map_io		= smartq_map_io,
 	.init_machine	= smartq5_machine_init,
 	.timer		= &s3c24xx_timer,
+	.restart	= s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c
index f112547..e5c09b6 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq7.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq7.c
@@ -17,19 +17,20 @@
 #include <linux/leds.h>
 #include <linux/platform_device.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
 #include <mach/map.h>
 #include <mach/regs-gpio.h>
 
-#include <plat/s3c6410.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/fb.h>
 #include <plat/gpio-cfg.h>
 #include <plat/regs-fb-v4.h>
 
+#include "common.h"
 #include "mach-smartq.h"
 
 static struct gpio_led smartq7_leds[] = {
@@ -164,7 +165,9 @@ MACHINE_START(SMARTQ7, "SmartQ 7")
 	/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
 	.atag_offset	= 0x100,
 	.init_irq	= s3c6410_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.map_io		= smartq_map_io,
 	.init_machine	= smartq7_machine_init,
 	.timer		= &s3c24xx_timer,
+	.restart	= s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index 73450c2..5f09653 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -22,6 +22,7 @@
 
 #include <asm/mach-types.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
@@ -31,12 +32,13 @@
 
 #include <plat/regs-serial.h>
 
-#include <plat/s3c6400.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/iic.h>
 
+#include "common.h"
+
 #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
 #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
 #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
@@ -88,7 +90,9 @@ MACHINE_START(SMDK6400, "SMDK6400")
 	.atag_offset	= 0x100,
 
 	.init_irq	= s3c6400_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.map_io		= smdk6400_map_io,
 	.init_machine	= smdk6400_machine_init,
 	.timer		= &s3c24xx_timer,
+	.restart	= s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index 8bc8edd..ca6fc20 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -43,6 +43,7 @@
 
 #include <video/platform_lcd.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
@@ -63,7 +64,6 @@
 #include <plat/fb.h>
 #include <plat/gpio-cfg.h>
 
-#include <plat/s3c6410.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
@@ -73,6 +73,8 @@
 #include <plat/backlight.h>
 #include <plat/regs-fb-v4.h>
 
+#include "common.h"
+
 #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
 #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
 #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
@@ -700,7 +702,9 @@ MACHINE_START(SMDK6410, "SMDK6410")
 	.atag_offset	= 0x100,
 
 	.init_irq	= s3c6410_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.map_io		= smdk6410_map_io,
 	.init_machine	= smdk6410_machine_init,
 	.timer		= &s3c24xx_timer,
+	.restart	= s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
index b375cd5..7d3e81b 100644
--- a/arch/arm/mach-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -17,10 +17,12 @@
 #include <linux/serial_core.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/pm_domain.h>
 
 #include <mach/map.h>
 #include <mach/irqs.h>
 
+#include <plat/devs.h>
 #include <plat/pm.h>
 #include <plat/wakeup-mask.h>
 
@@ -31,6 +33,148 @@
 #include <mach/regs-gpio-memport.h>
 #include <mach/regs-modem.h>
 
+struct s3c64xx_pm_domain {
+	char *const name;
+	u32 ena;
+	u32 pwr_stat;
+	struct generic_pm_domain pd;
+};
+
+static int s3c64xx_pd_off(struct generic_pm_domain *domain)
+{
+	struct s3c64xx_pm_domain *pd;
+	u32 val;
+
+	pd = container_of(domain, struct s3c64xx_pm_domain, pd);
+
+	val = __raw_readl(S3C64XX_NORMAL_CFG);
+	val &= ~(pd->ena);
+	__raw_writel(val, S3C64XX_NORMAL_CFG);
+
+	return 0;
+}
+
+static int s3c64xx_pd_on(struct generic_pm_domain *domain)
+{
+	struct s3c64xx_pm_domain *pd;
+	u32 val;
+	long retry = 1000000L;
+
+	pd = container_of(domain, struct s3c64xx_pm_domain, pd);
+
+	val = __raw_readl(S3C64XX_NORMAL_CFG);
+	val |= pd->ena;
+	__raw_writel(val, S3C64XX_NORMAL_CFG);
+
+	/* Not all domains provide power status readback */
+	if (pd->pwr_stat) {
+		do {
+			cpu_relax();
+			if (__raw_readl(S3C64XX_BLK_PWR_STAT) & pd->pwr_stat)
+				break;
+		} while (retry--);
+
+		if (!retry) {
+			pr_err("Failed to start domain %s\n", pd->name);
+			return -EBUSY;
+		}
+	}
+
+	return 0;
+}
+
+static struct s3c64xx_pm_domain s3c64xx_pm_irom = {
+	.name = "IROM",
+	.ena = S3C64XX_NORMALCFG_IROM_ON,
+	.pd = {
+		.power_off = s3c64xx_pd_off,
+		.power_on = s3c64xx_pd_on,
+	},
+};
+
+static struct s3c64xx_pm_domain s3c64xx_pm_etm = {
+	.name = "ETM",
+	.ena = S3C64XX_NORMALCFG_DOMAIN_ETM_ON,
+	.pwr_stat = S3C64XX_BLKPWRSTAT_ETM,
+	.pd = {
+		.power_off = s3c64xx_pd_off,
+		.power_on = s3c64xx_pd_on,
+	},
+};
+
+static struct s3c64xx_pm_domain s3c64xx_pm_s = {
+	.name = "S",
+	.ena = S3C64XX_NORMALCFG_DOMAIN_S_ON,
+	.pwr_stat = S3C64XX_BLKPWRSTAT_S,
+	.pd = {
+		.power_off = s3c64xx_pd_off,
+		.power_on = s3c64xx_pd_on,
+	},
+};
+
+static struct s3c64xx_pm_domain s3c64xx_pm_f = {
+	.name = "F",
+	.ena = S3C64XX_NORMALCFG_DOMAIN_F_ON,
+	.pwr_stat = S3C64XX_BLKPWRSTAT_F,
+	.pd = {
+		.power_off = s3c64xx_pd_off,
+		.power_on = s3c64xx_pd_on,
+	},
+};
+
+static struct s3c64xx_pm_domain s3c64xx_pm_p = {
+	.name = "P",
+	.ena = S3C64XX_NORMALCFG_DOMAIN_P_ON,
+	.pwr_stat = S3C64XX_BLKPWRSTAT_P,
+	.pd = {
+		.power_off = s3c64xx_pd_off,
+		.power_on = s3c64xx_pd_on,
+	},
+};
+
+static struct s3c64xx_pm_domain s3c64xx_pm_i = {
+	.name = "I",
+	.ena = S3C64XX_NORMALCFG_DOMAIN_I_ON,
+	.pwr_stat = S3C64XX_BLKPWRSTAT_I,
+	.pd = {
+		.power_off = s3c64xx_pd_off,
+		.power_on = s3c64xx_pd_on,
+	},
+};
+
+static struct s3c64xx_pm_domain s3c64xx_pm_g = {
+	.name = "G",
+	.ena = S3C64XX_NORMALCFG_DOMAIN_G_ON,
+	.pd = {
+		.power_off = s3c64xx_pd_off,
+		.power_on = s3c64xx_pd_on,
+	},
+};
+
+static struct s3c64xx_pm_domain s3c64xx_pm_v = {
+	.name = "V",
+	.ena = S3C64XX_NORMALCFG_DOMAIN_V_ON,
+	.pwr_stat = S3C64XX_BLKPWRSTAT_V,
+	.pd = {
+		.power_off = s3c64xx_pd_off,
+		.power_on = s3c64xx_pd_on,
+	},
+};
+
+static struct s3c64xx_pm_domain *s3c64xx_always_on_pm_domains[] = {
+	&s3c64xx_pm_irom,
+};
+
+static struct s3c64xx_pm_domain *s3c64xx_pm_domains[] = {
+	&s3c64xx_pm_etm,
+	&s3c64xx_pm_g,
+	&s3c64xx_pm_v,
+	&s3c64xx_pm_i,
+	&s3c64xx_pm_p,
+	&s3c64xx_pm_s,
+	&s3c64xx_pm_f,
+};
+
 #ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
 void s3c_pm_debug_smdkled(u32 set, u32 clear)
 {
@@ -89,6 +233,8 @@ static struct sleep_save misc_save[] = {
 
 	SAVE_ITEM(S3C64XX_SDMA_SEL),
 	SAVE_ITEM(S3C64XX_MODEM_MIFPCON),
+
+	SAVE_ITEM(S3C64XX_NORMAL_CFG),
 };
 
 void s3c_pm_configure_extint(void)
@@ -179,7 +325,26 @@ static void s3c64xx_pm_prepare(void)
 	__raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT), S3C64XX_WAKEUP_STAT);
 }
 
-static int s3c64xx_pm_init(void)
+int __init s3c64xx_pm_init(void)
+{
+	int i;
+
+	s3c_pm_init();
+
+	for (i = 0; i < ARRAY_SIZE(s3c64xx_always_on_pm_domains); i++)
+		pm_genpd_init(&s3c64xx_always_on_pm_domains[i]->pd,
+			      &pm_domain_always_on_gov, false);
+
+	for (i = 0; i < ARRAY_SIZE(s3c64xx_pm_domains); i++)
+		pm_genpd_init(&s3c64xx_pm_domains[i]->pd, NULL, false);
+
+	if (dev_get_platdata(&s3c_device_fb.dev))
+		pm_genpd_add_device(&s3c64xx_pm_f.pd, &s3c_device_fb.dev);
+
+	return 0;
+}
+
+static __init int s3c64xx_pm_initcall(void)
 {
 	pm_cpu_prep = s3c64xx_pm_prepare;
 	pm_cpu_sleep = s3c64xx_cpu_suspend;
@@ -198,5 +363,12 @@ static int s3c64xx_pm_init(void)
 
 	return 0;
 }
+arch_initcall(s3c64xx_pm_initcall);
+
+static __init int s3c64xx_pm_late_initcall(void)
+{
+	pm_genpd_poweroff_unused();
 
-arch_initcall(s3c64xx_pm_init);
+	return 0;
+}
+late_initcall(s3c64xx_pm_late_initcall);
diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c
index 7a3bc32..4869714 100644
--- a/arch/arm/mach-s3c64xx/s3c6400.c
+++ b/arch/arm/mach-s3c64xx/s3c6400.c
@@ -17,7 +17,7 @@
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 
@@ -38,7 +38,8 @@
 #include <plat/sdhci.h>
 #include <plat/iic-core.h>
 #include <plat/onenand-core.h>
-#include <plat/s3c6400.h>
+
+#include "common.h"
 
 void __init s3c6400_map_io(void)
 {
@@ -60,7 +61,7 @@ void __init s3c6400_map_io(void)
 void __init s3c6400_init_clocks(int xtal)
 {
 	s3c64xx_register_clocks(xtal, S3C6400_CLKDIV0_ARM_MASK);
-	s3c6400_setup_clocks();
+	s3c64xx_setup_clocks();
 }
 
 void __init s3c6400_init_irq(void)
@@ -70,17 +71,18 @@ void __init s3c6400_init_irq(void)
 	s3c64xx_init_irq(~0 & ~(0xf << 5), ~0);
 }
 
-struct sysdev_class s3c6400_sysclass = {
-	.name	= "s3c6400-core",
+static struct bus_type s3c6400_subsys = {
+	.name		= "s3c6400-core",
+	.dev_name	= "s3c6400-core",
 };
 
-static struct sys_device s3c6400_sysdev = {
-	.cls	= &s3c6400_sysclass,
+static struct device s3c6400_dev = {
+	.bus	= &s3c6400_subsys,
 };
 
 static int __init s3c6400_core_init(void)
 {
-	return sysdev_class_register(&s3c6400_sysclass);
+	return subsys_system_register(&s3c6400_subsys, NULL);
 }
 
 core_initcall(s3c6400_core_init);
@@ -89,5 +91,5 @@ int __init s3c6400_init(void)
 {
 	printk("S3C6400: Initialising architecture\n");
 
-	return sysdev_register(&s3c6400_sysdev);
+	return device_register(&s3c6400_dev);
 }
diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c
index 4117003..31c29fd 100644
--- a/arch/arm/mach-s3c64xx/s3c6410.c
+++ b/arch/arm/mach-s3c64xx/s3c6410.c
@@ -18,7 +18,7 @@
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 
@@ -41,8 +41,8 @@
 #include <plat/adc-core.h>
 #include <plat/iic-core.h>
 #include <plat/onenand-core.h>
-#include <plat/s3c6400.h>
-#include <plat/s3c6410.h>
+
+#include "common.h"
 
 void __init s3c6410_map_io(void)
 {
@@ -66,7 +66,7 @@ void __init s3c6410_init_clocks(int xtal)
 {
 	printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
 	s3c64xx_register_clocks(xtal, S3C6410_CLKDIV0_ARM_MASK);
-	s3c6400_setup_clocks();
+	s3c64xx_setup_clocks();
 }
 
 void __init s3c6410_init_irq(void)
@@ -75,17 +75,18 @@ void __init s3c6410_init_irq(void)
 	s3c64xx_init_irq(~0 & ~(1 << 7), ~0);
 }
 
-struct sysdev_class s3c6410_sysclass = {
-	.name	= "s3c6410-core",
+struct bus_type s3c6410_subsys = {
+	.name		= "s3c6410-core",
+	.dev_name	= "s3c6410-core",
 };
 
-static struct sys_device s3c6410_sysdev = {
-	.cls	= &s3c6410_sysclass,
+static struct device s3c6410_dev = {
+	.bus	= &s3c6410_subsys,
 };
 
 static int __init s3c6410_core_init(void)
 {
-	return sysdev_class_register(&s3c6410_sysclass);
+	return subsys_system_register(&s3c6410_subsys, NULL);
 }
 
 core_initcall(s3c6410_core_init);
@@ -94,5 +95,5 @@ int __init s3c6410_init(void)
 {
 	printk("S3C6410: Initialising architecture\n");
 
-	return sysdev_register(&s3c6410_sysdev);
+	return device_register(&s3c6410_dev);
 }
diff --git a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c
index 83d2afb..2cf8002 100644
--- a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c
+++ b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c
@@ -20,7 +20,7 @@
 #include <plat/fb.h>
 #include <plat/gpio-cfg.h>
 
-extern void s3c64xx_fb_gpio_setup_24bpp(void)
+void s3c64xx_fb_gpio_setup_24bpp(void)
 {
 	s3c_gpio_cfgrange_nopull(S3C64XX_GPI(0), 16, S3C_GPIO_SFN(2));
 	s3c_gpio_cfgrange_nopull(S3C64XX_GPJ(0), 12, S3C_GPIO_SFN(2));
diff --git a/arch/arm/mach-s5p64x0/Makefile b/arch/arm/mach-s5p64x0/Makefile
index a1324d8..d3f7409 100644
--- a/arch/arm/mach-s5p64x0/Makefile
+++ b/arch/arm/mach-s5p64x0/Makefile
@@ -10,14 +10,16 @@ obj-m				:=
 obj-n				:=
 obj-				:=
 
-# Core support for S5P64X0 system
+# Core
 
-obj-$(CONFIG_ARCH_S5P64X0)	+= cpu.o init.o clock.o dma.o
-obj-$(CONFIG_ARCH_S5P64X0)	+= setup-i2c0.o irq-eint.o
+obj-y				+= common.o clock.o
 obj-$(CONFIG_CPU_S5P6440)	+= clock-s5p6440.o
 obj-$(CONFIG_CPU_S5P6450)	+= clock-s5p6450.o
+
 obj-$(CONFIG_PM)		+= pm.o irq-pm.o
 
+obj-y				+= dma.o
+
 # machine support
 
 obj-$(CONFIG_MACH_SMDK6440)	+= mach-smdk6440.o
@@ -28,5 +30,6 @@ obj-$(CONFIG_MACH_SMDK6450)	+= mach-smdk6450.o
 obj-y				+= dev-audio.o
 obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
 
+obj-y					+= setup-i2c0.o
 obj-$(CONFIG_S5P64X0_SETUP_I2C1)	+= setup-i2c1.o
 obj-$(CONFIG_S5P64X0_SETUP_FB_24BPP)	+= setup-fb-24bpp.o
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c
index c54c65d..eb4ffe3 100644
--- a/arch/arm/mach-s5p64x0/clock-s5p6440.c
+++ b/arch/arm/mach-s5p64x0/clock-s5p6440.c
@@ -17,7 +17,7 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/clk.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -31,7 +31,8 @@
 #include <plat/pll.h>
 #include <plat/s5p-clock.h>
 #include <plat/clock-clksrc.h>
-#include <plat/s5p6440.h>
+
+#include "common.h"
 
 static u32 epll_div[][5] = {
 	{ 36000000,	0,	48, 1, 4 },
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c
index 2d04abf..bb7ee91 100644
--- a/arch/arm/mach-s5p64x0/clock-s5p6450.c
+++ b/arch/arm/mach-s5p64x0/clock-s5p6450.c
@@ -17,7 +17,7 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/clk.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -31,7 +31,8 @@
 #include <plat/pll.h>
 #include <plat/s5p-clock.h>
 #include <plat/clock-clksrc.h>
-#include <plat/s5p6450.h>
+
+#include "common.h"
 
 static struct clksrc_clk clk_mout_dpll = {
 	.clk	= {
diff --git a/arch/arm/mach-s5p64x0/clock.c b/arch/arm/mach-s5p64x0/clock.c
index b52c6e2..241d0e6 100644
--- a/arch/arm/mach-s5p64x0/clock.c
+++ b/arch/arm/mach-s5p64x0/clock.c
@@ -17,7 +17,7 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/clk.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -30,8 +30,8 @@
 #include <plat/pll.h>
 #include <plat/s5p-clock.h>
 #include <plat/clock-clksrc.h>
-#include <plat/s5p6440.h>
-#include <plat/s5p6450.h>
+
+#include "common.h"
 
 struct clksrc_clk clk_mout_apll = {
 	.clk	= {
diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c
new file mode 100644
index 0000000..28d0b91
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/common.c
@@ -0,0 +1,469 @@
+/*
+ * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Common Codes for S5P64X0 machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/device.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+
+#include <asm/irq.h>
+#include <asm/proc-fns.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/map.h>
+#include <mach/hardware.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/pm.h>
+#include <plat/adc-core.h>
+#include <plat/fb-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/regs-irqtype.h>
+#include <plat/regs-serial.h>
+#include <plat/watchdog-reset.h>
+
+#include "common.h"
+
+static const char name_s5p6440[] = "S5P6440";
+static const char name_s5p6450[] = "S5P6450";
+
+static struct cpu_table cpu_ids[] __initdata = {
+	{
+		.idcode		= S5P6440_CPU_ID,
+		.idmask		= S5P64XX_CPU_MASK,
+		.map_io		= s5p6440_map_io,
+		.init_clocks	= s5p6440_init_clocks,
+		.init_uarts	= s5p6440_init_uarts,
+		.init		= s5p64x0_init,
+		.name		= name_s5p6440,
+	}, {
+		.idcode		= S5P6450_CPU_ID,
+		.idmask		= S5P64XX_CPU_MASK,
+		.map_io		= s5p6450_map_io,
+		.init_clocks	= s5p6450_init_clocks,
+		.init_uarts	= s5p6450_init_uarts,
+		.init		= s5p64x0_init,
+		.name		= name_s5p6450,
+	},
+};
+
+/* Initial IO mappings */
+
+static struct map_desc s5p64x0_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_CHIPID,
+		.pfn		= __phys_to_pfn(S5P64X0_PA_CHIPID),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_SYS,
+		.pfn		= __phys_to_pfn(S5P64X0_PA_SYSCON),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_TIMER,
+		.pfn		= __phys_to_pfn(S5P64X0_PA_TIMER),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_WATCHDOG,
+		.pfn		= __phys_to_pfn(S5P64X0_PA_WDT),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_SROMC,
+		.pfn		= __phys_to_pfn(S5P64X0_PA_SROMC),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_GPIO,
+		.pfn		= __phys_to_pfn(S5P64X0_PA_GPIO),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC0,
+		.pfn		= __phys_to_pfn(S5P64X0_PA_VIC0),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC1,
+		.pfn		= __phys_to_pfn(S5P64X0_PA_VIC1),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static struct map_desc s5p6440_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S3C_VA_UART,
+		.pfn		= __phys_to_pfn(S5P6440_PA_UART(0)),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static struct map_desc s5p6450_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S3C_VA_UART,
+		.pfn		= __phys_to_pfn(S5P6450_PA_UART(0)),
+		.length		= SZ_512K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_UART + SZ_512K,
+		.pfn		= __phys_to_pfn(S5P6450_PA_UART(5)),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static void s5p64x0_idle(void)
+{
+	unsigned long val;
+
+	if (!need_resched()) {
+		val = __raw_readl(S5P64X0_PWR_CFG);
+		val &= ~(0x3 << 5);
+		val |= (0x1 << 5);
+		__raw_writel(val, S5P64X0_PWR_CFG);
+
+		cpu_do_idle();
+	}
+	local_irq_enable();
+}
+
+/*
+ * s5p64x0_map_io
+ *
+ * register the standard CPU IO areas
+ */
+
+void __init s5p64x0_init_io(struct map_desc *mach_desc, int size)
+{
+	/* initialize the io descriptors we need for initialization */
+	iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
+	if (mach_desc)
+		iotable_init(mach_desc, size);
+
+	/* detect cpu id and rev. */
+	s5p_init_cpu(S5P64X0_SYS_ID);
+
+	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+}
+
+void __init s5p6440_map_io(void)
+{
+	/* initialize any device information early */
+	s3c_adc_setname("s3c64xx-adc");
+	s3c_fb_setname("s5p64x0-fb");
+
+	iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc));
+	init_consistent_dma_size(SZ_8M);
+}
+
+void __init s5p6450_map_io(void)
+{
+	/* initialize any device information early */
+	s3c_adc_setname("s3c64xx-adc");
+	s3c_fb_setname("s5p64x0-fb");
+
+	iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc));
+	init_consistent_dma_size(SZ_8M);
+}
+
+/*
+ * s5p64x0_init_clocks
+ *
+ * register and setup the CPU clocks
+ */
+
+void __init s5p6440_init_clocks(int xtal)
+{
+	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+	s3c24xx_register_baseclocks(xtal);
+	s5p_register_clocks(xtal);
+	s5p6440_register_clocks();
+	s5p6440_setup_clocks();
+}
+
+void __init s5p6450_init_clocks(int xtal)
+{
+	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+	s3c24xx_register_baseclocks(xtal);
+	s5p_register_clocks(xtal);
+	s5p6450_register_clocks();
+	s5p6450_setup_clocks();
+}
+
+/*
+ * s5p64x0_init_irq
+ *
+ * register the CPU interrupts
+ */
+
+void __init s5p6440_init_irq(void)
+{
+	/* S5P6440 supports 2 VIC */
+	u32 vic[2];
+
+	/*
+	 * VIC0 is missing IRQ_VIC0[3, 4, 8, 10, (12-22)]
+	 * VIC1 is missing IRQ VIC1[1, 3, 4, 10, 11, 12, 14, 15, 22]
+	 */
+	vic[0] = 0xff800ae7;
+	vic[1] = 0xffbf23e5;
+
+	s5p_init_irq(vic, ARRAY_SIZE(vic));
+}
+
+void __init s5p6450_init_irq(void)
+{
+	/* S5P6450 supports only 2 VIC */
+	u32 vic[2];
+
+	/*
+	 * VIC0 is missing IRQ_VIC0[(13-15), (21-22)]
+	 * VIC1 is missing IRQ VIC1[12, 14, 23]
+	 */
+	vic[0] = 0xff9f1fff;
+	vic[1] = 0xff7fafff;
+
+	s5p_init_irq(vic, ARRAY_SIZE(vic));
+}
+
+struct bus_type s5p64x0_subsys = {
+	.name		= "s5p64x0-core",
+	.dev_name	= "s5p64x0-core",
+};
+
+static struct device s5p64x0_dev = {
+	.bus	= &s5p64x0_subsys,
+};
+
+static int __init s5p64x0_core_init(void)
+{
+	return subsys_system_register(&s5p64x0_subsys, NULL);
+}
+core_initcall(s5p64x0_core_init);
+
+int __init s5p64x0_init(void)
+{
+	printk(KERN_INFO "S5P64X0(S5P6440/S5P6450): Initializing architecture\n");
+
+	/* set idle function */
+	pm_idle = s5p64x0_idle;
+
+	return device_register(&s5p64x0_dev);
+}
+
+static struct s3c24xx_uart_clksrc s5p64x0_serial_clocks[] = {
+	[0] = {
+		.name		= "pclk_low",
+		.divisor	= 1,
+		.min_baud	= 0,
+		.max_baud	= 0,
+	},
+	[1] = {
+		.name		= "uclk1",
+		.divisor	= 1,
+		.min_baud	= 0,
+		.max_baud	= 0,
+	},
+};
+
+/* uart registration process */
+
+void __init s5p64x0_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	struct s3c2410_uartcfg *tcfg = cfg;
+	u32 ucnt;
+
+	for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
+		if (!tcfg->clocks) {
+			tcfg->clocks = s5p64x0_serial_clocks;
+			tcfg->clocks_size = ARRAY_SIZE(s5p64x0_serial_clocks);
+		}
+	}
+}
+
+void __init s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	int uart;
+
+	for (uart = 0; uart < no; uart++) {
+		s5p_uart_resources[uart].resources->start = S5P6440_PA_UART(uart);
+		s5p_uart_resources[uart].resources->end = S5P6440_PA_UART(uart) + S5P_SZ_UART;
+	}
+
+	s5p64x0_common_init_uarts(cfg, no);
+	s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
+}
+
+void __init s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	s5p64x0_common_init_uarts(cfg, no);
+	s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
+}
+
+#define eint_offset(irq)	((irq) - IRQ_EINT(0))
+
+static int s5p64x0_irq_eint_set_type(struct irq_data *data, unsigned int type)
+{
+	int offs = eint_offset(data->irq);
+	int shift;
+	u32 ctrl, mask;
+	u32 newvalue = 0;
+
+	if (offs > 15)
+		return -EINVAL;
+
+	switch (type) {
+	case IRQ_TYPE_NONE:
+		printk(KERN_WARNING "No edge setting!\n");
+		break;
+	case IRQ_TYPE_EDGE_RISING:
+		newvalue = S3C2410_EXTINT_RISEEDGE;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		newvalue = S3C2410_EXTINT_FALLEDGE;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		newvalue = S3C2410_EXTINT_BOTHEDGE;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		newvalue = S3C2410_EXTINT_LOWLEV;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		newvalue = S3C2410_EXTINT_HILEV;
+		break;
+	default:
+		printk(KERN_ERR "No such irq type %d", type);
+		return -EINVAL;
+	}
+
+	shift = (offs / 2) * 4;
+	mask = 0x7 << shift;
+
+	ctrl = __raw_readl(S5P64X0_EINT0CON0) & ~mask;
+	ctrl |= newvalue << shift;
+	__raw_writel(ctrl, S5P64X0_EINT0CON0);
+
+	/* Configure the GPIO pin for 6450 or 6440 based on CPU ID */
+	if (soc_is_s5p6450())
+		s3c_gpio_cfgpin(S5P6450_GPN(offs), S3C_GPIO_SFN(2));
+	else
+		s3c_gpio_cfgpin(S5P6440_GPN(offs), S3C_GPIO_SFN(2));
+
+	return 0;
+}
+
+/*
+ * s5p64x0_irq_demux_eint
+ *
+ * This function demuxes the IRQ from the group0 external interrupts,
+ * from IRQ_EINT(0) to IRQ_EINT(15). It is designed to be inlined into
+ * the specific handlers s5p64x0_irq_demux_eintX_Y.
+ */
+static inline void s5p64x0_irq_demux_eint(unsigned int start, unsigned int end)
+{
+	u32 status = __raw_readl(S5P64X0_EINT0PEND);
+	u32 mask = __raw_readl(S5P64X0_EINT0MASK);
+	unsigned int irq;
+
+	status &= ~mask;
+	status >>= start;
+	status &= (1 << (end - start + 1)) - 1;
+
+	for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
+		if (status & 1)
+			generic_handle_irq(irq);
+		status >>= 1;
+	}
+}
+
+static void s5p64x0_irq_demux_eint0_3(unsigned int irq, struct irq_desc *desc)
+{
+	s5p64x0_irq_demux_eint(0, 3);
+}
+
+static void s5p64x0_irq_demux_eint4_11(unsigned int irq, struct irq_desc *desc)
+{
+	s5p64x0_irq_demux_eint(4, 11);
+}
+
+static void s5p64x0_irq_demux_eint12_15(unsigned int irq,
+					struct irq_desc *desc)
+{
+	s5p64x0_irq_demux_eint(12, 15);
+}
+
+static int s5p64x0_alloc_gc(void)
+{
+	struct irq_chip_generic *gc;
+	struct irq_chip_type *ct;
+
+	gc = irq_alloc_generic_chip("s5p64x0-eint", 1, S5P_IRQ_EINT_BASE,
+				    S5P_VA_GPIO, handle_level_irq);
+	if (!gc) {
+		printk(KERN_ERR "%s: irq_alloc_generic_chip for group 0"
+			"external interrupts failed\n", __func__);
+		return -EINVAL;
+	}
+
+	ct = gc->chip_types;
+	ct->chip.irq_ack = irq_gc_ack_set_bit;
+	ct->chip.irq_mask = irq_gc_mask_set_bit;
+	ct->chip.irq_unmask = irq_gc_mask_clr_bit;
+	ct->chip.irq_set_type = s5p64x0_irq_eint_set_type;
+	ct->chip.irq_set_wake = s3c_irqext_wake;
+	ct->regs.ack = EINT0PEND_OFFSET;
+	ct->regs.mask = EINT0MASK_OFFSET;
+	irq_setup_generic_chip(gc, IRQ_MSK(16), IRQ_GC_INIT_MASK_CACHE,
+			       IRQ_NOREQUEST | IRQ_NOPROBE, 0);
+	return 0;
+}
+
+static int __init s5p64x0_init_irq_eint(void)
+{
+	int ret = s5p64x0_alloc_gc();
+	irq_set_chained_handler(IRQ_EINT0_3, s5p64x0_irq_demux_eint0_3);
+	irq_set_chained_handler(IRQ_EINT4_11, s5p64x0_irq_demux_eint4_11);
+	irq_set_chained_handler(IRQ_EINT12_15, s5p64x0_irq_demux_eint12_15);
+
+	return ret;
+}
+arch_initcall(s5p64x0_init_irq_eint);
+
+void s5p64x0_restart(char mode, const char *cmd)
+{
+	if (mode != 's')
+		arch_wdt_reset();
+
+	soft_restart(0);
+}
diff --git a/arch/arm/mach-s5p64x0/common.h b/arch/arm/mach-s5p64x0/common.h
new file mode 100644
index 0000000..f8a60fd
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/common.h
@@ -0,0 +1,57 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Common Header for S5P64X0 machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_S5P64X0_COMMON_H
+#define __ARCH_ARM_MACH_S5P64X0_COMMON_H
+
+void s5p6440_init_irq(void);
+void s5p6450_init_irq(void);
+void s5p64x0_init_io(struct map_desc *mach_desc, int size);
+
+void s5p6440_register_clocks(void);
+void s5p6440_setup_clocks(void);
+
+void s5p6450_register_clocks(void);
+void s5p6450_setup_clocks(void);
+
+void s5p64x0_restart(char mode, const char *cmd);
+
+#ifdef CONFIG_CPU_S5P6440
+
+extern  int s5p64x0_init(void);
+extern void s5p6440_map_io(void);
+extern void s5p6440_init_clocks(int xtal);
+
+extern void s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+#else
+#define s5p6440_init_clocks NULL
+#define s5p6440_init_uarts NULL
+#define s5p6440_map_io NULL
+#define s5p64x0_init NULL
+#endif
+
+#ifdef CONFIG_CPU_S5P6450
+
+extern  int s5p64x0_init(void);
+extern void s5p6450_map_io(void);
+extern void s5p6450_init_clocks(int xtal);
+
+extern void s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+#else
+#define s5p6450_init_clocks NULL
+#define s5p6450_init_uarts NULL
+#define s5p6450_map_io NULL
+#define s5p64x0_init NULL
+#endif
+
+#endif /* __ARCH_ARM_MACH_S5P64X0_COMMON_H */
diff --git a/arch/arm/mach-s5p64x0/cpu.c b/arch/arm/mach-s5p64x0/cpu.c
deleted file mode 100644
index ecab40c..0000000
--- a/arch/arm/mach-s5p64x0/cpu.c
+++ /dev/null
@@ -1,215 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/cpu.c
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/sysdev.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/sched.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/proc-fns.h>
-#include <asm/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include <plat/regs-serial.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-#include <plat/s5p6440.h>
-#include <plat/s5p6450.h>
-#include <plat/adc-core.h>
-#include <plat/fb-core.h>
-
-/* Initial IO mappings */
-
-static struct map_desc s5p64x0_iodesc[] __initdata = {
-	{
-		.virtual	= (unsigned long)S5P_VA_GPIO,
-		.pfn		= __phys_to_pfn(S5P64X0_PA_GPIO),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)VA_VIC0,
-		.pfn		= __phys_to_pfn(S5P64X0_PA_VIC0),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)VA_VIC1,
-		.pfn		= __phys_to_pfn(S5P64X0_PA_VIC1),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static struct map_desc s5p6440_iodesc[] __initdata = {
-	{
-		.virtual	= (unsigned long)S3C_VA_UART,
-		.pfn		= __phys_to_pfn(S5P6440_PA_UART(0)),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static struct map_desc s5p6450_iodesc[] __initdata = {
-	{
-		.virtual	= (unsigned long)S3C_VA_UART,
-		.pfn		= __phys_to_pfn(S5P6450_PA_UART(0)),
-		.length		= SZ_512K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_UART + SZ_512K,
-		.pfn		= __phys_to_pfn(S5P6450_PA_UART(5)),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static void s5p64x0_idle(void)
-{
-	unsigned long val;
-
-	if (!need_resched()) {
-		val = __raw_readl(S5P64X0_PWR_CFG);
-		val &= ~(0x3 << 5);
-		val |= (0x1 << 5);
-		__raw_writel(val, S5P64X0_PWR_CFG);
-
-		cpu_do_idle();
-	}
-	local_irq_enable();
-}
-
-/*
- * s5p64x0_map_io
- *
- * register the standard CPU IO areas
- */
-
-void __init s5p6440_map_io(void)
-{
-	/* initialize any device information early */
-	s3c_adc_setname("s3c64xx-adc");
-	s3c_fb_setname("s5p64x0-fb");
-
-	iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
-	iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc));
-	init_consistent_dma_size(SZ_8M);
-}
-
-void __init s5p6450_map_io(void)
-{
-	/* initialize any device information early */
-	s3c_adc_setname("s3c64xx-adc");
-	s3c_fb_setname("s5p64x0-fb");
-
-	iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
-	iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc));
-	init_consistent_dma_size(SZ_8M);
-}
-
-/*
- * s5p64x0_init_clocks
- *
- * register and setup the CPU clocks
- */
-
-void __init s5p6440_init_clocks(int xtal)
-{
-	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
-	s3c24xx_register_baseclocks(xtal);
-	s5p_register_clocks(xtal);
-	s5p6440_register_clocks();
-	s5p6440_setup_clocks();
-}
-
-void __init s5p6450_init_clocks(int xtal)
-{
-	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
-	s3c24xx_register_baseclocks(xtal);
-	s5p_register_clocks(xtal);
-	s5p6450_register_clocks();
-	s5p6450_setup_clocks();
-}
-
-/*
- * s5p64x0_init_irq
- *
- * register the CPU interrupts
- */
-
-void __init s5p6440_init_irq(void)
-{
-	/* S5P6440 supports 2 VIC */
-	u32 vic[2];
-
-	/*
-	 * VIC0 is missing IRQ_VIC0[3, 4, 8, 10, (12-22)]
-	 * VIC1 is missing IRQ VIC1[1, 3, 4, 10, 11, 12, 14, 15, 22]
-	 */
-	vic[0] = 0xff800ae7;
-	vic[1] = 0xffbf23e5;
-
-	s5p_init_irq(vic, ARRAY_SIZE(vic));
-}
-
-void __init s5p6450_init_irq(void)
-{
-	/* S5P6450 supports only 2 VIC */
-	u32 vic[2];
-
-	/*
-	 * VIC0 is missing IRQ_VIC0[(13-15), (21-22)]
-	 * VIC1 is missing IRQ VIC1[12, 14, 23]
-	 */
-	vic[0] = 0xff9f1fff;
-	vic[1] = 0xff7fafff;
-
-	s5p_init_irq(vic, ARRAY_SIZE(vic));
-}
-
-struct sysdev_class s5p64x0_sysclass = {
-	.name	= "s5p64x0-core",
-};
-
-static struct sys_device s5p64x0_sysdev = {
-	.cls	= &s5p64x0_sysclass,
-};
-
-static int __init s5p64x0_core_init(void)
-{
-	return sysdev_class_register(&s5p64x0_sysclass);
-}
-core_initcall(s5p64x0_core_init);
-
-int __init s5p64x0_init(void)
-{
-	printk(KERN_INFO "S5P64X0(S5P6440/S5P6450): Initializing architecture\n");
-
-	/* set idle function */
-	pm_idle = s5p64x0_idle;
-
-	return sysdev_register(&s5p64x0_sysdev);
-}
diff --git a/arch/arm/mach-s5p64x0/include/mach/entry-macro.S b/arch/arm/mach-s5p64x0/include/mach/entry-macro.S
index 10b62b4..fbb246d 100644
--- a/arch/arm/mach-s5p64x0/include/mach/entry-macro.S
+++ b/arch/arm/mach-s5p64x0/include/mach/entry-macro.S
@@ -10,7 +10,8 @@
  * published by the Free Software Foundation.
 */
 
-#include <mach/map.h>
-#include <plat/irqs.h>
+		.macro  disable_fiq
+		.endm
 
-#include <asm/entry-macro-vic2.S>
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
diff --git a/arch/arm/mach-s5p64x0/include/mach/system.h b/arch/arm/mach-s5p64x0/include/mach/system.h
index 60f5753..cf26e09 100644
--- a/arch/arm/mach-s5p64x0/include/mach/system.h
+++ b/arch/arm/mach-s5p64x0/include/mach/system.h
@@ -13,8 +13,6 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H __FILE__
 
-#include <plat/system-reset.h>
-
 static void arch_idle(void)
 {
 	/* nothing here yet */
diff --git a/arch/arm/mach-s5p64x0/include/mach/vmalloc.h b/arch/arm/mach-s5p64x0/include/mach/vmalloc.h
deleted file mode 100644
index 38dcc71..0000000
--- a/arch/arm/mach-s5p64x0/include/mach/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/vmalloc.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C6400 vmalloc definition
-*/
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END	0xF6000000UL
-
-#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5p64x0/init.c b/arch/arm/mach-s5p64x0/init.c
deleted file mode 100644
index 79833ca..0000000
--- a/arch/arm/mach-s5p64x0/init.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/init.c
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * S5P64X0 - Init support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-
-#include <mach/map.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/s5p6440.h>
-#include <plat/s5p6450.h>
-#include <plat/regs-serial.h>
-
-static struct s3c24xx_uart_clksrc s5p64x0_serial_clocks[] = {
-	[0] = {
-		.name		= "pclk_low",
-		.divisor	= 1,
-		.min_baud	= 0,
-		.max_baud	= 0,
-	},
-	[1] = {
-		.name		= "uclk1",
-		.divisor	= 1,
-		.min_baud	= 0,
-		.max_baud	= 0,
-	},
-};
-
-/* uart registration process */
-
-void __init s5p64x0_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	struct s3c2410_uartcfg *tcfg = cfg;
-	u32 ucnt;
-
-	for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
-		if (!tcfg->clocks) {
-			tcfg->clocks = s5p64x0_serial_clocks;
-			tcfg->clocks_size = ARRAY_SIZE(s5p64x0_serial_clocks);
-		}
-	}
-}
-
-void __init s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	int uart;
-
-	for (uart = 0; uart < no; uart++) {
-		s5p_uart_resources[uart].resources->start = S5P6440_PA_UART(uart);
-		s5p_uart_resources[uart].resources->end = S5P6440_PA_UART(uart) + S5P_SZ_UART;
-	}
-
-	s5p64x0_common_init_uarts(cfg, no);
-	s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
-}
-
-void __init s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	s5p64x0_common_init_uarts(cfg, no);
-	s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
-}
diff --git a/arch/arm/mach-s5p64x0/irq-eint.c b/arch/arm/mach-s5p64x0/irq-eint.c
deleted file mode 100644
index 275dc74..0000000
--- a/arch/arm/mach-s5p64x0/irq-eint.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/* arch/arm/mach-s5p64x0/irq-eint.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd
- *		http://www.samsung.com/
- *
- * Based on linux/arch/arm/mach-s3c64xx/irq-eint.c
- *
- * S5P64X0 - Interrupt handling for External Interrupts.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <plat/cpu.h>
-#include <plat/regs-irqtype.h>
-#include <plat/gpio-cfg.h>
-#include <plat/pm.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/regs-clock.h>
-
-#define eint_offset(irq)	((irq) - IRQ_EINT(0))
-
-static int s5p64x0_irq_eint_set_type(struct irq_data *data, unsigned int type)
-{
-	int offs = eint_offset(data->irq);
-	int shift;
-	u32 ctrl, mask;
-	u32 newvalue = 0;
-
-	if (offs > 15)
-		return -EINVAL;
-
-	switch (type) {
-	case IRQ_TYPE_NONE:
-		printk(KERN_WARNING "No edge setting!\n");
-		break;
-	case IRQ_TYPE_EDGE_RISING:
-		newvalue = S3C2410_EXTINT_RISEEDGE;
-		break;
-	case IRQ_TYPE_EDGE_FALLING:
-		newvalue = S3C2410_EXTINT_FALLEDGE;
-		break;
-	case IRQ_TYPE_EDGE_BOTH:
-		newvalue = S3C2410_EXTINT_BOTHEDGE;
-		break;
-	case IRQ_TYPE_LEVEL_LOW:
-		newvalue = S3C2410_EXTINT_LOWLEV;
-		break;
-	case IRQ_TYPE_LEVEL_HIGH:
-		newvalue = S3C2410_EXTINT_HILEV;
-		break;
-	default:
-		printk(KERN_ERR "No such irq type %d", type);
-		return -EINVAL;
-	}
-
-	shift = (offs / 2) * 4;
-	mask = 0x7 << shift;
-
-	ctrl = __raw_readl(S5P64X0_EINT0CON0) & ~mask;
-	ctrl |= newvalue << shift;
-	__raw_writel(ctrl, S5P64X0_EINT0CON0);
-
-	/* Configure the GPIO pin for 6450 or 6440 based on CPU ID */
-	if (soc_is_s5p6450())
-		s3c_gpio_cfgpin(S5P6450_GPN(offs), S3C_GPIO_SFN(2));
-	else
-		s3c_gpio_cfgpin(S5P6440_GPN(offs), S3C_GPIO_SFN(2));
-
-	return 0;
-}
-
-/*
- * s5p64x0_irq_demux_eint
- *
- * This function demuxes the IRQ from the group0 external interrupts,
- * from IRQ_EINT(0) to IRQ_EINT(15). It is designed to be inlined into
- * the specific handlers s5p64x0_irq_demux_eintX_Y.
- */
-static inline void s5p64x0_irq_demux_eint(unsigned int start, unsigned int end)
-{
-	u32 status = __raw_readl(S5P64X0_EINT0PEND);
-	u32 mask = __raw_readl(S5P64X0_EINT0MASK);
-	unsigned int irq;
-
-	status &= ~mask;
-	status >>= start;
-	status &= (1 << (end - start + 1)) - 1;
-
-	for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
-		if (status & 1)
-			generic_handle_irq(irq);
-		status >>= 1;
-	}
-}
-
-static void s5p64x0_irq_demux_eint0_3(unsigned int irq, struct irq_desc *desc)
-{
-	s5p64x0_irq_demux_eint(0, 3);
-}
-
-static void s5p64x0_irq_demux_eint4_11(unsigned int irq, struct irq_desc *desc)
-{
-	s5p64x0_irq_demux_eint(4, 11);
-}
-
-static void s5p64x0_irq_demux_eint12_15(unsigned int irq,
-					struct irq_desc *desc)
-{
-	s5p64x0_irq_demux_eint(12, 15);
-}
-
-static int s5p64x0_alloc_gc(void)
-{
-	struct irq_chip_generic *gc;
-	struct irq_chip_type *ct;
-
-	gc = irq_alloc_generic_chip("s5p64x0-eint", 1, S5P_IRQ_EINT_BASE,
-				    S5P_VA_GPIO, handle_level_irq);
-	if (!gc) {
-		printk(KERN_ERR "%s: irq_alloc_generic_chip for group 0"
-			"external interrupts failed\n", __func__);
-		return -EINVAL;
-	}
-
-	ct = gc->chip_types;
-	ct->chip.irq_ack = irq_gc_ack_set_bit;
-	ct->chip.irq_mask = irq_gc_mask_set_bit;
-	ct->chip.irq_unmask = irq_gc_mask_clr_bit;
-	ct->chip.irq_set_type = s5p64x0_irq_eint_set_type;
-	ct->chip.irq_set_wake = s3c_irqext_wake;
-	ct->regs.ack = EINT0PEND_OFFSET;
-	ct->regs.mask = EINT0MASK_OFFSET;
-	irq_setup_generic_chip(gc, IRQ_MSK(16), IRQ_GC_INIT_MASK_CACHE,
-			       IRQ_NOREQUEST | IRQ_NOPROBE, 0);
-	return 0;
-}
-
-static int __init s5p64x0_init_irq_eint(void)
-{
-	int ret = s5p64x0_alloc_gc();
-	irq_set_chained_handler(IRQ_EINT0_3, s5p64x0_irq_demux_eint0_3);
-	irq_set_chained_handler(IRQ_EINT4_11, s5p64x0_irq_demux_eint4_11);
-	irq_set_chained_handler(IRQ_EINT12_15, s5p64x0_irq_demux_eint12_15);
-
-	return ret;
-}
-arch_initcall(s5p64x0_init_irq_eint);
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c
index 4a1250c..34d98a1 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6440.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c
@@ -27,6 +27,7 @@
 
 #include <video/platform_lcd.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/irq.h>
@@ -40,7 +41,6 @@
 
 #include <plat/regs-serial.h>
 #include <plat/gpio-cfg.h>
-#include <plat/s5p6440.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
@@ -53,6 +53,8 @@
 #include <plat/fb.h>
 #include <plat/regs-fb.h>
 
+#include "common.h"
+
 #define SMDK6440_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				S3C2410_UCON_RXILEVEL |		\
 				S3C2410_UCON_TXIRQMODE |	\
@@ -201,7 +203,7 @@ static struct platform_pwm_backlight_data smdk6440_bl_data = {
 
 static void __init smdk6440_map_io(void)
 {
-	s5p_init_io(NULL, 0, S5P64X0_SYS_ID);
+	s5p64x0_init_io(NULL, 0);
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(smdk6440_uartcfgs, ARRAY_SIZE(smdk6440_uartcfgs));
 	s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
@@ -242,7 +244,9 @@ MACHINE_START(SMDK6440, "SMDK6440")
 	.atag_offset	= 0x100,
 
 	.init_irq	= s5p6440_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.map_io		= smdk6440_map_io,
 	.init_machine	= smdk6440_machine_init,
 	.timer		= &s5p_timer,
+	.restart	= s5p64x0_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c
index 0ab129e..135cf5d 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6450.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c
@@ -27,6 +27,7 @@
 
 #include <video/platform_lcd.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/irq.h>
@@ -40,7 +41,6 @@
 
 #include <plat/regs-serial.h>
 #include <plat/gpio-cfg.h>
-#include <plat/s5p6450.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
@@ -53,6 +53,8 @@
 #include <plat/fb.h>
 #include <plat/regs-fb.h>
 
+#include "common.h"
+
 #define SMDK6450_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				S3C2410_UCON_RXILEVEL |		\
 				S3C2410_UCON_TXIRQMODE |	\
@@ -221,7 +223,7 @@ static struct platform_pwm_backlight_data smdk6450_bl_data = {
 
 static void __init smdk6450_map_io(void)
 {
-	s5p_init_io(NULL, 0, S5P64X0_SYS_ID);
+	s5p64x0_init_io(NULL, 0);
 	s3c24xx_init_clocks(19200000);
 	s3c24xx_init_uarts(smdk6450_uartcfgs, ARRAY_SIZE(smdk6450_uartcfgs));
 	s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
@@ -262,7 +264,9 @@ MACHINE_START(SMDK6450, "SMDK6450")
 	.atag_offset	= 0x100,
 
 	.init_irq	= s5p6450_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.map_io		= smdk6450_map_io,
 	.init_machine	= smdk6450_machine_init,
 	.timer		= &s5p_timer,
+	.restart	= s5p64x0_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s5p64x0/pm.c b/arch/arm/mach-s5p64x0/pm.c
index 6992724..23f9b22 100644
--- a/arch/arm/mach-s5p64x0/pm.c
+++ b/arch/arm/mach-s5p64x0/pm.c
@@ -160,7 +160,7 @@ static void s5p64x0_pm_prepare(void)
 
 }
 
-static int s5p64x0_pm_add(struct sys_device *sysdev)
+static int s5p64x0_pm_add(struct device *dev)
 {
 	pm_cpu_prep = s5p64x0_pm_prepare;
 	pm_cpu_sleep = s5p64x0_cpu_suspend;
@@ -169,15 +169,17 @@ static int s5p64x0_pm_add(struct sys_device *sysdev)
 	return 0;
 }
 
-static struct sysdev_driver s5p64x0_pm_driver = {
-	.add		= s5p64x0_pm_add,
+static struct subsys_interface s5p64x0_pm_interface = {
+	.name		= "s5p64x0_pm",
+	.subsys		= &s5p64x0_subsys,
+	.add_dev	= s5p64x0_pm_add,
 };
 
 static __init int s5p64x0_pm_drvinit(void)
 {
 	s3c_pm_init();
 
-	return sysdev_driver_register(&s5p64x0_sysclass, &s5p64x0_pm_driver);
+	return subsys_interface_register(&s5p64x0_pm_interface);
 }
 arch_initcall(s5p64x0_pm_drvinit);
 
diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile
index a5e6e60..c3166c4 100644
--- a/arch/arm/mach-s5pc100/Makefile
+++ b/arch/arm/mach-s5pc100/Makefile
@@ -9,28 +9,25 @@ obj-m				:=
 obj-n				:=
 obj-				:=
 
-# Core support for S5PC100 system
+# Core
 
-obj-$(CONFIG_CPU_S5PC100)	+= cpu.o init.o clock.o
-obj-$(CONFIG_CPU_S5PC100)	+= setup-i2c0.o
-obj-$(CONFIG_CPU_S5PC100)	+= dma.o
+obj-y				+= common.o clock.o
 
-# Helper and device support
-
-obj-$(CONFIG_S5PC100_SETUP_FB_24BPP)	+= setup-fb-24bpp.o
-obj-$(CONFIG_S5PC100_SETUP_I2C1)	+= setup-i2c1.o
-obj-$(CONFIG_S5PC100_SETUP_IDE)		+= setup-ide.o
-obj-$(CONFIG_S5PC100_SETUP_KEYPAD)	+= setup-keypad.o
-obj-$(CONFIG_S5PC100_SETUP_SDHCI)	+= setup-sdhci.o
-obj-$(CONFIG_S5PC100_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
-
-# device support
-obj-y				+= dev-audio.o
-obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
+obj-y				+= dma.o
 
 # machine support
 
 obj-$(CONFIG_MACH_SMDKC100)	+= mach-smdkc100.o
 
 # device support
+
 obj-y				+= dev-audio.o
+obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
+
+obj-y					+= setup-i2c0.o
+obj-$(CONFIG_S5PC100_SETUP_FB_24BPP)	+= setup-fb-24bpp.o
+obj-$(CONFIG_S5PC100_SETUP_I2C1)	+= setup-i2c1.o
+obj-$(CONFIG_S5PC100_SETUP_IDE)		+= setup-ide.o
+obj-$(CONFIG_S5PC100_SETUP_KEYPAD)	+= setup-keypad.o
+obj-$(CONFIG_S5PC100_SETUP_SDHCI)	+= setup-sdhci.o
+obj-$(CONFIG_S5PC100_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c
index 8d47709..c4c7489 100644
--- a/arch/arm/mach-s5pc100/clock.c
+++ b/arch/arm/mach-s5pc100/clock.c
@@ -27,7 +27,8 @@
 #include <plat/pll.h>
 #include <plat/s5p-clock.h>
 #include <plat/clock-clksrc.h>
-#include <plat/s5pc100.h>
+
+#include "common.h"
 
 static struct clk s5p_clk_otgphy = {
 	.name		= "otg_phy",
diff --git a/arch/arm/mach-s5pc100/cpu.c b/arch/arm/mach-s5pc100/common.c
index fd2708e..c909573 100644
--- a/arch/arm/mach-s5pc100/cpu.c
+++ b/arch/arm/mach-s5pc100/common.c
@@ -1,17 +1,16 @@
-/* linux/arch/arm/mach-s5pc100/cpu.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+/*
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
  * Copyright 2009 Samsung Electronics Co.
  *	Byungho Min <bhmin@samsung.com>
  *
- * Based on mach-s3c6410/cpu.c
+ * Common Codes for S5PC100
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
-*/
+ */
 
 #include <linux/kernel.h>
 #include <linux/types.h>
@@ -21,40 +20,78 @@
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/sched.h>
 
+#include <asm/irq.h>
+#include <asm/proc-fns.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/proc-fns.h>
-
-#include <mach/hardware.h>
 #include <mach/map.h>
-#include <asm/irq.h>
-
-#include <plat/regs-serial.h>
+#include <mach/hardware.h>
 #include <mach/regs-clock.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/clock.h>
-#include <plat/ata-core.h>
-#include <plat/iic-core.h>
 #include <plat/sdhci.h>
 #include <plat/adc-core.h>
-#include <plat/onenand-core.h>
+#include <plat/ata-core.h>
 #include <plat/fb-core.h>
+#include <plat/iic-core.h>
+#include <plat/onenand-core.h>
+#include <plat/regs-serial.h>
+#include <plat/watchdog-reset.h>
+
+#include "common.h"
+
+static const char name_s5pc100[] = "S5PC100";
 
-#include <plat/s5pc100.h>
+static struct cpu_table cpu_ids[] __initdata = {
+	{
+		.idcode		= S5PC100_CPU_ID,
+		.idmask		= S5PC100_CPU_MASK,
+		.map_io		= s5pc100_map_io,
+		.init_clocks	= s5pc100_init_clocks,
+		.init_uarts	= s5pc100_init_uarts,
+		.init		= s5pc100_init,
+		.name		= name_s5pc100,
+	},
+};
 
 /* Initial IO mappings */
 
 static struct map_desc s5pc100_iodesc[] __initdata = {
 	{
+		.virtual	= (unsigned long)S5P_VA_CHIPID,
+		.pfn		= __phys_to_pfn(S5PC100_PA_CHIPID),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_SYS,
+		.pfn		= __phys_to_pfn(S5PC100_PA_SYSCON),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_TIMER,
+		.pfn		= __phys_to_pfn(S5PC100_PA_TIMER),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_WATCHDOG,
+		.pfn		= __phys_to_pfn(S5PC100_PA_WATCHDOG),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_SROMC,
+		.pfn		= __phys_to_pfn(S5PC100_PA_SROMC),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
 		.virtual	= (unsigned long)S5P_VA_SYSTIMER,
 		.pfn		= __phys_to_pfn(S5PC100_PA_SYSTIMER),
 		.length		= SZ_16K,
@@ -100,15 +137,27 @@ static void s5pc100_idle(void)
 	local_irq_enable();
 }
 
-/* s5pc100_map_io
+/*
+ * s5pc100_map_io
  *
- * register the standard cpu IO areas
-*/
+ * register the standard CPU IO areas
+ */
 
-void __init s5pc100_map_io(void)
+void __init s5pc100_init_io(struct map_desc *mach_desc, int size)
 {
+	/* initialize the io descriptors we need for initialization */
 	iotable_init(s5pc100_iodesc, ARRAY_SIZE(s5pc100_iodesc));
+	if (mach_desc)
+		iotable_init(mach_desc, size);
+
+	/* detect cpu id and rev. */
+	s5p_init_cpu(S5P_VA_CHIPID);
 
+	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+}
+
+void __init s5pc100_map_io(void)
+{
 	/* initialise device information early */
 	s5pc100_default_sdhci0();
 	s5pc100_default_sdhci1();
@@ -143,19 +192,19 @@ void __init s5pc100_init_irq(void)
 	s5p_init_irq(vic, ARRAY_SIZE(vic));
 }
 
-static struct sysdev_class s5pc100_sysclass = {
-	.name	= "s5pc100-core",
+static struct bus_type s5pc100_subsys = {
+	.name		= "s5pc100-core",
+	.dev_name	= "s5pc100-core",
 };
 
-static struct sys_device s5pc100_sysdev = {
-	.cls	= &s5pc100_sysclass,
+static struct device s5pc100_dev = {
+	.bus	= &s5pc100_subsys,
 };
 
 static int __init s5pc100_core_init(void)
 {
-	return sysdev_class_register(&s5pc100_sysclass);
+	return subsys_system_register(&s5pc100_subsys, NULL);
 }
-
 core_initcall(s5pc100_core_init);
 
 int __init s5pc100_init(void)
@@ -165,5 +214,20 @@ int __init s5pc100_init(void)
 	/* set idle function */
 	pm_idle = s5pc100_idle;
 
-	return sysdev_register(&s5pc100_sysdev);
+	return device_register(&s5pc100_dev);
+}
+
+/* uart registration process */
+
+void __init s5pc100_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
+}
+
+void s5pc100_restart(char mode, const char *cmd)
+{
+	if (mode != 's')
+		arch_wdt_reset();
+
+	soft_restart(0);
 }
diff --git a/arch/arm/mach-s5pc100/common.h b/arch/arm/mach-s5pc100/common.h
new file mode 100644
index 0000000..9fbd3ae
--- /dev/null
+++ b/arch/arm/mach-s5pc100/common.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Common Header for S5PC100 machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_S5PC100_COMMON_H
+#define __ARCH_ARM_MACH_S5PC100_COMMON_H
+
+void s5pc100_init_io(struct map_desc *mach_desc, int size);
+void s5pc100_init_irq(void);
+
+void s5pc100_register_clocks(void);
+void s5pc100_setup_clocks(void);
+
+void s5pc100_restart(char mode, const char *cmd);
+
+#ifdef CONFIG_CPU_S5PC100
+
+extern  int s5pc100_init(void);
+extern void s5pc100_map_io(void);
+extern void s5pc100_init_clocks(int xtal);
+extern void s5pc100_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+#else
+#define s5pc100_init_clocks NULL
+#define s5pc100_init_uarts NULL
+#define s5pc100_map_io NULL
+#define s5pc100_init NULL
+#endif
+
+#endif /* __ARCH_ARM_MACH_S5PC100_COMMON_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/entry-macro.S b/arch/arm/mach-s5pc100/include/mach/entry-macro.S
index ba76af0..b8c242e 100644
--- a/arch/arm/mach-s5pc100/include/mach/entry-macro.S
+++ b/arch/arm/mach-s5pc100/include/mach/entry-macro.S
@@ -12,39 +12,14 @@
  * warranty of any kind, whether express or implied.
 */
 
-#include <asm/hardware/vic.h>
-#include <mach/map.h>
-#include <plat/irqs.h>
-
 	.macro	disable_fiq
 	.endm
 
 	.macro	get_irqnr_preamble, base, tmp
-	ldr	\base, =VA_VIC0
 	.endm
 
 	.macro	arch_ret_to_user, tmp1, tmp2
 	.endm
 
 	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-	@ check the vic0
-	mov	\irqnr, # S5P_IRQ_OFFSET + 31
-	ldr	\irqstat, [ \base, # VIC_IRQ_STATUS ]
-	teq	\irqstat, #0
-
-	@ otherwise try vic1
-	addeq	\tmp, \base, #(VA_VIC1 - VA_VIC0)
-	addeq	\irqnr, \irqnr, #32
-	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
-	teqeq	\irqstat, #0
-
-	@ otherwise try vic2
-	addeq	\tmp, \base, #(VA_VIC2 - VA_VIC0)
-	addeq	\irqnr, \irqnr, #32
-	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
-	teqeq	\irqstat, #0
-
-	clzne	\irqstat, \irqstat
-	subne	\irqnr, \irqnr, \irqstat
 	.endm
diff --git a/arch/arm/mach-s5pc100/include/mach/system.h b/arch/arm/mach-s5pc100/include/mach/system.h
index a9ea57c..afc96c2 100644
--- a/arch/arm/mach-s5pc100/include/mach/system.h
+++ b/arch/arm/mach-s5pc100/include/mach/system.h
@@ -11,8 +11,6 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H __FILE__
 
-#include <plat/system-reset.h>
-
 static void arch_idle(void)
 {
 	/* nothing here yet */
diff --git a/arch/arm/mach-s5pc100/include/mach/vmalloc.h b/arch/arm/mach-s5pc100/include/mach/vmalloc.h
deleted file mode 100644
index 44c8e57..0000000
--- a/arch/arm/mach-s5pc100/include/mach/vmalloc.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* arch/arm/mach-s5pc100/include/mach/vmalloc.h
- *
- * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C6400 vmalloc definition
-*/
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END	0xF6000000UL
-
-#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5pc100/init.c b/arch/arm/mach-s5pc100/init.c
deleted file mode 100644
index 19d7b52..0000000
--- a/arch/arm/mach-s5pc100/init.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/* linux/arch/arm/plat-s5pc100/s5pc100-init.c
- *
- * Copyright 2009 Samsung Electronics Co.
- *      Byungho Min <bhmin@samsung.com>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/s5pc100.h>
-
-/* uart registration process */
-void __init s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
-}
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
index 26f5c91..674d229 100644
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -25,6 +25,7 @@
 #include <linux/input.h>
 #include <linux/pwm_backlight.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
@@ -42,7 +43,6 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
-#include <plat/s5pc100.h>
 #include <plat/fb.h>
 #include <plat/iic.h>
 #include <plat/ata.h>
@@ -53,6 +53,8 @@
 #include <plat/backlight.h>
 #include <plat/regs-fb-v4.h>
 
+#include "common.h"
+
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define SMDKC100_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
@@ -215,7 +217,7 @@ static struct platform_pwm_backlight_data smdkc100_bl_data = {
 
 static void __init smdkc100_map_io(void)
 {
-	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	s5pc100_init_io(NULL, 0);
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(smdkc100_uartcfgs, ARRAY_SIZE(smdkc100_uartcfgs));
 }
@@ -250,7 +252,9 @@ MACHINE_START(SMDKC100, "SMDKC100")
 	/* Maintainer: Byungho Min <bhmin@samsung.com> */
 	.atag_offset	= 0x100,
 	.init_irq	= s5pc100_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.map_io		= smdkc100_map_io,
 	.init_machine	= smdkc100_machine_init,
 	.timer		= &s3c24xx_timer,
+	.restart	= s5pc100_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile
index 009fbe5..4c59186 100644
--- a/arch/arm/mach-s5pv210/Makefile
+++ b/arch/arm/mach-s5pv210/Makefile
@@ -10,18 +10,20 @@ obj-m				:=
 obj-n				:=
 obj-				:=
 
-# Core support for S5PV210 system
+# Core
+
+obj-y				+= common.o clock.o
 
-obj-$(CONFIG_CPU_S5PV210)	+= cpu.o init.o clock.o dma.o
-obj-$(CONFIG_CPU_S5PV210)	+= setup-i2c0.o
 obj-$(CONFIG_PM)		+= pm.o
 
+obj-y				+= dma.o
+
 # machine support
 
 obj-$(CONFIG_MACH_AQUILA)	+= mach-aquila.o
-obj-$(CONFIG_MACH_SMDKV210)	+= mach-smdkv210.o
-obj-$(CONFIG_MACH_SMDKC110)	+= mach-smdkc110.o
 obj-$(CONFIG_MACH_GONI)		+= mach-goni.o
+obj-$(CONFIG_MACH_SMDKC110)	+= mach-smdkc110.o
+obj-$(CONFIG_MACH_SMDKV210)	+= mach-smdkv210.o
 obj-$(CONFIG_MACH_TORBRECK)	+= mach-torbreck.o
 
 # device support
@@ -29,11 +31,12 @@ obj-$(CONFIG_MACH_TORBRECK)	+= mach-torbreck.o
 obj-y				+= dev-audio.o
 obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
 
+obj-y					+= setup-i2c0.o
 obj-$(CONFIG_S5PV210_SETUP_FB_24BPP)	+= setup-fb-24bpp.o
 obj-$(CONFIG_S5PV210_SETUP_FIMC)	+= setup-fimc.o
-obj-$(CONFIG_S5PV210_SETUP_I2C1) 	+= setup-i2c1.o
-obj-$(CONFIG_S5PV210_SETUP_I2C2) 	+= setup-i2c2.o
+obj-$(CONFIG_S5PV210_SETUP_I2C1)	+= setup-i2c1.o
+obj-$(CONFIG_S5PV210_SETUP_I2C2)	+= setup-i2c2.o
 obj-$(CONFIG_S5PV210_SETUP_IDE)		+= setup-ide.o
 obj-$(CONFIG_S5PV210_SETUP_KEYPAD)	+= setup-keypad.o
-obj-$(CONFIG_S5PV210_SETUP_SDHCI)       += setup-sdhci.o
+obj-$(CONFIG_S5PV210_SETUP_SDHCI)	+= setup-sdhci.o
 obj-$(CONFIG_S5PV210_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index 4c5ac7a..04c9b57 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -17,7 +17,7 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/clk.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/io.h>
 
 #include <mach/map.h>
@@ -29,7 +29,8 @@
 #include <plat/pll.h>
 #include <plat/s5p-clock.h>
 #include <plat/clock-clksrc.h>
-#include <plat/s5pv210.h>
+
+#include "common.h"
 
 static unsigned long xtal;
 
diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/common.c
index 84ec746..0ec3933 100644
--- a/arch/arm/mach-s5pv210/cpu.c
+++ b/arch/arm/mach-s5pv210/common.c
@@ -1,12 +1,13 @@
-/* linux/arch/arm/mach-s5pv210/cpu.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+/*
+ * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
+ * Common Codes for S5PV210
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
-*/
+ */
 
 #include <linux/kernel.h>
 #include <linux/types.h>
@@ -17,37 +18,78 @@
 #include <linux/module.h>
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/sched.h>
 #include <linux/dma-mapping.h>
+#include <linux/serial_core.h>
 
+#include <asm/proc-fns.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/proc-fns.h>
 #include <mach/map.h>
 #include <mach/regs-clock.h>
 
 #include <plat/cpu.h>
-#include <plat/devs.h>
 #include <plat/clock.h>
-#include <plat/fb-core.h>
-#include <plat/s5pv210.h>
+#include <plat/devs.h>
+#include <plat/sdhci.h>
 #include <plat/adc-core.h>
 #include <plat/ata-core.h>
+#include <plat/fb-core.h>
 #include <plat/fimc-core.h>
 #include <plat/iic-core.h>
 #include <plat/keypad-core.h>
-#include <plat/sdhci.h>
-#include <plat/reset.h>
 #include <plat/tv-core.h>
+#include <plat/regs-serial.h>
+
+#include "common.h"
+
+static const char name_s5pv210[] = "S5PV210/S5PC110";
+
+static struct cpu_table cpu_ids[] __initdata = {
+	{
+		.idcode		= S5PV210_CPU_ID,
+		.idmask		= S5PV210_CPU_MASK,
+		.map_io		= s5pv210_map_io,
+		.init_clocks	= s5pv210_init_clocks,
+		.init_uarts	= s5pv210_init_uarts,
+		.init		= s5pv210_init,
+		.name		= name_s5pv210,
+	},
+};
 
 /* Initial IO mappings */
 
 static struct map_desc s5pv210_iodesc[] __initdata = {
 	{
+		.virtual	= (unsigned long)S5P_VA_CHIPID,
+		.pfn		= __phys_to_pfn(S5PV210_PA_CHIPID),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_SYS,
+		.pfn		= __phys_to_pfn(S5PV210_PA_SYSCON),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_TIMER,
+		.pfn		= __phys_to_pfn(S5PV210_PA_TIMER),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_WATCHDOG,
+		.pfn		= __phys_to_pfn(S5PV210_PA_WATCHDOG),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_SROMC,
+		.pfn		= __phys_to_pfn(S5PV210_PA_SROMC),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
 		.virtual	= (unsigned long)S5P_VA_SYSTIMER,
 		.pfn		= __phys_to_pfn(S5PV210_PA_SYSTIMER),
 		.length		= SZ_4K,
@@ -108,19 +150,32 @@ static void s5pv210_idle(void)
 	local_irq_enable();
 }
 
-static void s5pv210_sw_reset(void)
+void s5pv210_restart(char mode, const char *cmd)
 {
 	__raw_writel(0x1, S5P_SWRESET);
 }
 
-/* s5pv210_map_io
+/*
+ * s5pv210_map_io
  *
  * register the standard cpu IO areas
-*/
+ */
 
-void __init s5pv210_map_io(void)
+void __init s5pv210_init_io(struct map_desc *mach_desc, int size)
 {
+	/* initialize the io descriptors we need for initialization */
 	iotable_init(s5pv210_iodesc, ARRAY_SIZE(s5pv210_iodesc));
+	if (mach_desc)
+		iotable_init(mach_desc, size);
+
+	/* detect cpu id and rev. */
+	s5p_init_cpu(S5P_VA_CHIPID);
+
+	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+}
+
+void __init s5pv210_map_io(void)
+{
 	init_consistent_dma_size(14 << 20);
 
 	/* initialise device information early */
@@ -174,19 +229,19 @@ void __init s5pv210_init_irq(void)
 	s5p_init_irq(vic, ARRAY_SIZE(vic));
 }
 
-struct sysdev_class s5pv210_sysclass = {
-	.name	= "s5pv210-core",
+struct bus_type s5pv210_subsys = {
+	.name		= "s5pv210-core",
+	.dev_name	= "s5pv210-core",
 };
 
-static struct sys_device s5pv210_sysdev = {
-	.cls	= &s5pv210_sysclass,
+static struct device s5pv210_dev = {
+	.bus	= &s5pv210_subsys,
 };
 
 static int __init s5pv210_core_init(void)
 {
-	return sysdev_class_register(&s5pv210_sysclass);
+	return subsys_system_register(&s5pv210_subsys, NULL);
 }
-
 core_initcall(s5pv210_core_init);
 
 int __init s5pv210_init(void)
@@ -196,8 +251,31 @@ int __init s5pv210_init(void)
 	/* set idle function */
 	pm_idle = s5pv210_idle;
 
-	/* set sw_reset function */
-	s5p_reset_hook = s5pv210_sw_reset;
+	return device_register(&s5pv210_dev);
+}
+
+static struct s3c24xx_uart_clksrc s5pv210_serial_clocks[] = {
+	[0] = {
+		.name		= "pclk",
+		.divisor	= 1,
+		.min_baud	= 0,
+		.max_baud	= 0,
+	},
+};
+
+/* uart registration process */
+
+void __init s5pv210_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	struct s3c2410_uartcfg *tcfg = cfg;
+	u32 ucnt;
+
+	for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
+		if (!tcfg->clocks) {
+			tcfg->clocks = s5pv210_serial_clocks;
+			tcfg->clocks_size = ARRAY_SIZE(s5pv210_serial_clocks);
+		}
+	}
 
-	return sysdev_register(&s5pv210_sysdev);
+	s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
 }
diff --git a/arch/arm/mach-s5pv210/common.h b/arch/arm/mach-s5pv210/common.h
new file mode 100644
index 0000000..6ed2af5
--- /dev/null
+++ b/arch/arm/mach-s5pv210/common.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Common Header for S5PV210 machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_S5PV210_COMMON_H
+#define __ARCH_ARM_MACH_S5PV210_COMMON_H
+
+void s5pv210_init_io(struct map_desc *mach_desc, int size);
+void s5pv210_init_irq(void);
+
+void s5pv210_register_clocks(void);
+void s5pv210_setup_clocks(void);
+
+void s5pv210_restart(char mode, const char *cmd);
+
+#ifdef CONFIG_CPU_S5PV210
+
+extern  int s5pv210_init(void);
+extern void s5pv210_map_io(void);
+extern void s5pv210_init_clocks(int xtal);
+extern void s5pv210_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+#else
+#define s5pv210_init_clocks NULL
+#define s5pv210_init_uarts NULL
+#define s5pv210_map_io NULL
+#define s5pv210_init NULL
+#endif
+
+#endif /* __ARCH_ARM_MACH_S5PV210_COMMON_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/entry-macro.S b/arch/arm/mach-s5pv210/include/mach/entry-macro.S
index 3aa41ac..bebca1b 100644
--- a/arch/arm/mach-s5pv210/include/mach/entry-macro.S
+++ b/arch/arm/mach-s5pv210/include/mach/entry-macro.S
@@ -10,45 +10,8 @@
  * published by the Free Software Foundation.
 */
 
-#include <asm/hardware/vic.h>
-#include <mach/map.h>
-#include <plat/irqs.h>
-
 	.macro	disable_fiq
 	.endm
 
-	.macro	get_irqnr_preamble, base, tmp
-	ldr	\base, =VA_VIC0
-	.endm
-
 	.macro	arch_ret_to_user, tmp1, tmp2
 	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-	@ check the vic0
-	mov	\irqnr, # S5P_IRQ_OFFSET + 31
-	ldr	\irqstat, [ \base, # VIC_IRQ_STATUS ]
-	teq	\irqstat, #0
-
-	@ otherwise try vic1
-	addeq	\tmp, \base, #(VA_VIC1 - VA_VIC0)
-	addeq	\irqnr, \irqnr, #32
-	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
-	teqeq	\irqstat, #0
-
-	@ otherwise try vic2
-	addeq	\tmp, \base, #(VA_VIC2 - VA_VIC0)
-	addeq	\irqnr, \irqnr, #32
-	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
-	teqeq	\irqstat, #0
-
-	@ otherwise try vic3
-	addeq	\tmp, \base, #(VA_VIC3 - VA_VIC0)
-	addeq	\irqnr, \irqnr, #32
-	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
-	teqeq	\irqstat, #0
-
-	clzne	\irqstat, \irqstat
-	subne	\irqnr, \irqnr, \irqstat
-	.endm
diff --git a/arch/arm/mach-s5pv210/include/mach/system.h b/arch/arm/mach-s5pv210/include/mach/system.h
index af8a200..bf288ce 100644
--- a/arch/arm/mach-s5pv210/include/mach/system.h
+++ b/arch/arm/mach-s5pv210/include/mach/system.h
@@ -13,8 +13,6 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H __FILE__
 
-#include <plat/system-reset.h>
-
 static void arch_idle(void)
 {
 	/* nothing here yet */
diff --git a/arch/arm/mach-s5pv210/include/mach/vmalloc.h b/arch/arm/mach-s5pv210/include/mach/vmalloc.h
deleted file mode 100644
index a6c659d..0000000
--- a/arch/arm/mach-s5pv210/include/mach/vmalloc.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/include/mach/vmalloc.h
- *
- * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Based on arch/arm/mach-s5p6442/include/mach/vmalloc.h
- *
- * S5PV210 vmalloc definition
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H __FILE__
-
-#define VMALLOC_END	0xF6000000UL
-
-#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5pv210/init.c b/arch/arm/mach-s5pv210/init.c
deleted file mode 100644
index 4865ae2..0000000
--- a/arch/arm/mach-s5pv210/init.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/init.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/s5pv210.h>
-#include <plat/regs-serial.h>
-
-static struct s3c24xx_uart_clksrc s5pv210_serial_clocks[] = {
-	[0] = {
-		.name		= "pclk",
-		.divisor	= 1,
-		.min_baud	= 0,
-		.max_baud	= 0,
-	},
-};
-
-/* uart registration process */
-void __init s5pv210_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	struct s3c2410_uartcfg *tcfg = cfg;
-	u32 ucnt;
-
-	for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
-		if (!tcfg->clocks) {
-			tcfg->clocks = s5pv210_serial_clocks;
-			tcfg->clocks_size = ARRAY_SIZE(s5pv210_serial_clocks);
-		}
-	}
-
-	s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
-}
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index 5811a96..6f7dfe9 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -22,6 +22,7 @@
 #include <linux/input.h>
 #include <linux/gpio.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/setup.h>
@@ -32,7 +33,6 @@
 
 #include <plat/gpio-cfg.h>
 #include <plat/regs-serial.h>
-#include <plat/s5pv210.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/fb.h>
@@ -41,6 +41,8 @@
 #include <plat/s5p-time.h>
 #include <plat/regs-fb-v4.h>
 
+#include "common.h"
+
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define AQUILA_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
@@ -644,7 +646,7 @@ static void __init aquila_sound_init(void)
 
 static void __init aquila_map_io(void)
 {
-	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	s5pv210_init_io(NULL, 0);
 	s3c24xx_init_clocks(24000000);
 	s3c24xx_init_uarts(aquila_uartcfgs, ARRAY_SIZE(aquila_uartcfgs));
 	s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
@@ -680,7 +682,9 @@ MACHINE_START(AQUILA, "Aquila")
 	   Kyungmin Park <kyungmin.park@samsung.com> */
 	.atag_offset	= 0x100,
 	.init_irq	= s5pv210_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.map_io		= aquila_map_io,
 	.init_machine	= aquila_machine_init,
 	.timer		= &s5p_timer,
+	.restart	= s5pv210_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 15edcae..12c6937 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -27,6 +27,7 @@
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/setup.h>
@@ -37,7 +38,6 @@
 
 #include <plat/gpio-cfg.h>
 #include <plat/regs-serial.h>
-#include <plat/s5pv210.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/fb.h>
@@ -54,6 +54,8 @@
 #include <media/s5p_fimc.h>
 #include <media/noon010pc30.h>
 
+#include "common.h"
+
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define GONI_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
@@ -890,7 +892,7 @@ static void __init goni_sound_init(void)
 
 static void __init goni_map_io(void)
 {
-	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	s5pv210_init_io(NULL, 0);
 	s3c24xx_init_clocks(24000000);
 	s3c24xx_init_uarts(goni_uartcfgs, ARRAY_SIZE(goni_uartcfgs));
 	s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
@@ -956,8 +958,10 @@ MACHINE_START(GONI, "GONI")
 	/* Maintainers: Kyungmin Park <kyungmin.park@samsung.com> */
 	.atag_offset	= 0x100,
 	.init_irq	= s5pv210_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.map_io		= goni_map_io,
 	.init_machine	= goni_machine_init,
 	.timer		= &s5p_timer,
 	.reserve	= &goni_reserve,
+	.restart	= s5pv210_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c
index f7266bb..b323983 100644
--- a/arch/arm/mach-s5pv210/mach-smdkc110.c
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
@@ -13,8 +13,9 @@
 #include <linux/init.h>
 #include <linux/serial_core.h>
 #include <linux/i2c.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/setup.h>
@@ -24,7 +25,6 @@
 #include <mach/regs-clock.h>
 
 #include <plat/regs-serial.h>
-#include <plat/s5pv210.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/ata.h>
@@ -32,6 +32,8 @@
 #include <plat/pm.h>
 #include <plat/s5p-time.h>
 
+#include "common.h"
+
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define SMDKC110_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
@@ -109,7 +111,7 @@ static struct i2c_board_info smdkc110_i2c_devs2[] __initdata = {
 
 static void __init smdkc110_map_io(void)
 {
-	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	s5pv210_init_io(NULL, 0);
 	s3c24xx_init_clocks(24000000);
 	s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
 	s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
@@ -138,7 +140,9 @@ MACHINE_START(SMDKC110, "SMDKC110")
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
 	.atag_offset	= 0x100,
 	.init_irq	= s5pv210_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.map_io		= smdkc110_map_io,
 	.init_machine	= smdkc110_machine_init,
 	.timer		= &s5p_timer,
+	.restart	= s5pv210_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index a9106c3..b4021dd 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -13,13 +13,14 @@
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/dm9000.h>
 #include <linux/fb.h>
 #include <linux/gpio.h>
 #include <linux/delay.h>
 #include <linux/pwm_backlight.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/setup.h>
@@ -33,7 +34,6 @@
 #include <plat/regs-serial.h>
 #include <plat/regs-srom.h>
 #include <plat/gpio-cfg.h>
-#include <plat/s5pv210.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/adc.h>
@@ -47,6 +47,8 @@
 #include <plat/backlight.h>
 #include <plat/regs-fb-v4.h>
 
+#include "common.h"
+
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define SMDKV210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
@@ -273,11 +275,12 @@ static struct samsung_bl_gpio_info smdkv210_bl_gpio_info = {
 
 static struct platform_pwm_backlight_data smdkv210_bl_data = {
 	.pwm_id = 3,
+	.pwm_period_ns = 1000,
 };
 
 static void __init smdkv210_map_io(void)
 {
-	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	s5pv210_init_io(NULL, 0);
 	s3c24xx_init_clocks(24000000);
 	s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
 	s5p_set_timer_source(S5P_PWM2, S5P_PWM4);
@@ -315,7 +318,9 @@ MACHINE_START(SMDKV210, "SMDKV210")
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
 	.atag_offset	= 0x100,
 	.init_irq	= s5pv210_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.map_io		= smdkv210_map_io,
 	.init_machine	= smdkv210_machine_init,
 	.timer		= &s5p_timer,
+	.restart	= s5pv210_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-torbreck.c b/arch/arm/mach-s5pv210/mach-torbreck.c
index 97cc066..74e99bc 100644
--- a/arch/arm/mach-s5pv210/mach-torbreck.c
+++ b/arch/arm/mach-s5pv210/mach-torbreck.c
@@ -14,6 +14,7 @@
 #include <linux/init.h>
 #include <linux/serial_core.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/setup.h>
@@ -23,12 +24,13 @@
 #include <mach/regs-clock.h>
 
 #include <plat/regs-serial.h>
-#include <plat/s5pv210.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/iic.h>
 #include <plat/s5p-time.h>
 
+#include "common.h"
+
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define TORBRECK_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
@@ -102,7 +104,7 @@ static struct i2c_board_info torbreck_i2c_devs2[] __initdata = {
 
 static void __init torbreck_map_io(void)
 {
-	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	s5pv210_init_io(NULL, 0);
 	s3c24xx_init_clocks(24000000);
 	s3c24xx_init_uarts(torbreck_uartcfgs, ARRAY_SIZE(torbreck_uartcfgs));
 	s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
@@ -127,7 +129,9 @@ MACHINE_START(TORBRECK, "TORBRECK")
 	/* Maintainer: Hyunchul Ko <ghcstop@gmail.com> */
 	.atag_offset	= 0x100,
 	.init_irq	= s5pv210_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.map_io		= torbreck_map_io,
 	.init_machine	= torbreck_machine_init,
 	.timer		= &s5p_timer,
+	.restart	= s5pv210_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c
index f149d27..677c71c 100644
--- a/arch/arm/mach-s5pv210/pm.c
+++ b/arch/arm/mach-s5pv210/pm.c
@@ -133,7 +133,7 @@ static void s5pv210_pm_prepare(void)
 	s3c_pm_do_save(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save));
 }
 
-static int s5pv210_pm_add(struct sys_device *sysdev)
+static int s5pv210_pm_add(struct device *dev)
 {
 	pm_cpu_prep = s5pv210_pm_prepare;
 	pm_cpu_sleep = s5pv210_cpu_suspend;
@@ -141,13 +141,15 @@ static int s5pv210_pm_add(struct sys_device *sysdev)
 	return 0;
 }
 
-static struct sysdev_driver s5pv210_pm_driver = {
-	.add		= s5pv210_pm_add,
+static struct subsys_interface s5pv210_pm_interface = {
+	.name		= "s5pv210_pm",
+	.subsys		= &s5pv210_subsys,
+	.add_dev	= s5pv210_pm_add,
 };
 
 static __init int s5pv210_pm_drvinit(void)
 {
-	return sysdev_driver_register(&s5pv210_sysclass, &s5pv210_pm_driver);
+	return subsys_interface_register(&s5pv210_pm_interface);
 }
 arch_initcall(s5pv210_pm_drvinit);
 
diff --git a/arch/arm/mach-sa1100/Makefile.boot b/arch/arm/mach-sa1100/Makefile.boot
index 5a616f6..f7951aa 100644
--- a/arch/arm/mach-sa1100/Makefile.boot
+++ b/arch/arm/mach-sa1100/Makefile.boot
@@ -1,5 +1,5 @@
-ifeq ($(CONFIG_ARCH_SA1100),y)
-   zreladdr-$(CONFIG_SA1111)		+= 0xc0208000
+ifeq ($(CONFIG_SA1111),y)
+   zreladdr-y	+= 0xc0208000
 else
    zreladdr-y	+= 0xc0008000
 endif
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 3dd133f..6b93e20 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -455,4 +455,5 @@ MACHINE_START(ASSABET, "Intel-Assabet")
 #ifdef CONFIG_SA1111
 	.dma_zone_size	= SZ_1M,
 #endif
+	.restart	= sa11x0_restart,
 MACHINE_END
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index bda83e1..b07a2c0 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -309,4 +309,5 @@ MACHINE_START(BADGE4, "Hewlett-Packard Laboratories BadgePAD 4")
 #ifdef CONFIG_SA1111
 	.dma_zone_size	= SZ_1M,
 #endif
+	.restart	= sa11x0_restart,
 MACHINE_END
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index 7f3da4b..11bb6d0 100644
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -139,4 +139,5 @@ MACHINE_START(CERF, "Intrinsyc CerfBoard/CerfCube")
 	.init_irq	= cerf_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= cerf_init,
+	.restart	= sa11x0_restart,
 MACHINE_END
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 2965cc9..b9060e2 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -387,4 +387,5 @@ MACHINE_START(COLLIE, "Sharp-Collie")
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= collie_init,
+	.restart	= sa11x0_restart,
 MACHINE_END
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 5fa5ae1..bb10ee2 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -126,6 +126,17 @@ static void sa1100_power_off(void)
 	PMCR = PMCR_SF;
 }
 
+void sa11x0_restart(char mode, const char *cmd)
+{
+	if (mode == 's') {
+		/* Jump into ROM at address 0 */
+		soft_restart(0);
+	} else {
+		/* Use on-chip reset capability */
+		RSRR = RSRR_SWR;
+	}
+}
+
 static void sa11x0_register_device(struct platform_device *dev, void *data)
 {
 	int err;
diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h
index b7a9a60..33268cf 100644
--- a/arch/arm/mach-sa1100/generic.h
+++ b/arch/arm/mach-sa1100/generic.h
@@ -10,6 +10,7 @@ extern struct sys_timer sa1100_timer;
 extern void __init sa1100_map_io(void);
 extern void __init sa1100_init_irq(void);
 extern void __init sa1100_init_gpio(void);
+extern void sa11x0_restart(char, const char *);
 
 #define SET_BANK(__nr,__start,__size) \
 	mi->bank[__nr].start = (__start), \
diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c
index b30733a..1e6b3c1 100644
--- a/arch/arm/mach-sa1100/h3100.c
+++ b/arch/arm/mach-sa1100/h3100.c
@@ -89,5 +89,6 @@ MACHINE_START(H3100, "Compaq iPAQ H3100")
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= h3100_mach_init,
+	.restart	= sa11x0_restart,
 MACHINE_END
 
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index 6fd324d..6b58e74 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -130,5 +130,6 @@ MACHINE_START(H3600, "Compaq iPAQ H3600")
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= h3600_mach_init,
+	.restart	= sa11x0_restart,
 MACHINE_END
 
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index 30f4a55..c01bb36 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -200,4 +200,5 @@ MACHINE_START(HACKKIT, "HackKit Cpu Board")
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= hackkit_init,
+	.restart	= sa11x0_restart,
 MACHINE_END
diff --git a/arch/arm/mach-sa1100/include/mach/system.h b/arch/arm/mach-sa1100/include/mach/system.h
index ba9da9f..e17b208 100644
--- a/arch/arm/mach-sa1100/include/mach/system.h
+++ b/arch/arm/mach-sa1100/include/mach/system.h
@@ -3,20 +3,7 @@
  *
  * Copyright (c) 1999 Nicolas Pitre <nico@fluxnic.net>
  */
-#include <mach/hardware.h>
-
 static inline void arch_idle(void)
 {
 	cpu_do_idle();
 }
-
-static inline void arch_reset(char mode, const char *cmd)
-{
-	if (mode == 's') {
-		/* Jump into ROM at address 0 */
-		cpu_reset(0);
-	} else {
-		/* Use on-chip reset capability */
-		RSRR = RSRR_SWR;
-	}
-}
diff --git a/arch/arm/mach-sa1100/include/mach/vmalloc.h b/arch/arm/mach-sa1100/include/mach/vmalloc.h
deleted file mode 100644
index b3d0023..0000000
--- a/arch/arm/mach-sa1100/include/mach/vmalloc.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/*
- * arch/arm/mach-sa1100/include/mach/vmalloc.h
- */
-#define VMALLOC_END       (0xe8000000UL)
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index 77198fe..ee121d6 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -373,4 +373,5 @@ MACHINE_START(JORNADA720, "HP Jornada 720")
 #ifdef CONFIG_SA1111
 	.dma_zone_size	= SZ_1M,
 #endif
+	.restart	= sa11x0_restart,
 MACHINE_END
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index 5bc59d0..af4e276 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -66,4 +66,5 @@ MACHINE_START(LART, "LART")
 	.init_irq	= sa1100_init_irq,
 	.init_machine	= lart_init,
 	.timer		= &sa1100_timer,
+	.restart	= sa11x0_restart,
 MACHINE_END
diff --git a/arch/arm/mach-sa1100/nanoengine.c b/arch/arm/mach-sa1100/nanoengine.c
index 032f388..85f6ee6 100644
--- a/arch/arm/mach-sa1100/nanoengine.c
+++ b/arch/arm/mach-sa1100/nanoengine.c
@@ -19,6 +19,7 @@
 
 #include <asm/mach-types.h>
 #include <asm/setup.h>
+#include <asm/page.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
@@ -116,4 +117,5 @@ MACHINE_START(NANOENGINE, "BSE nanoEngine")
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= nanoengine_init,
+	.restart	= sa11x0_restart,
 MACHINE_END
diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c
index 65161f2..9307df0 100644
--- a/arch/arm/mach-sa1100/pleb.c
+++ b/arch/arm/mach-sa1100/pleb.c
@@ -150,4 +150,5 @@ MACHINE_START(PLEB, "PLEB")
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine   = pleb_init,
+	.restart	= sa11x0_restart,
 MACHINE_END
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index 1cccbf5..318b2b7 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -87,4 +87,5 @@ MACHINE_START(SHANNON, "Shannon (AKA: Tuxscreen)")
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= shannon_init,
+	.restart	= sa11x0_restart,
 MACHINE_END
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index 4790f3f..e17c04d 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -396,4 +396,5 @@ MACHINE_START(SIMPAD, "Simpad")
 	.map_io		= simpad_map_io,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
+	.restart	= sa11x0_restart,
 MACHINE_END
diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index fa66024..69e3353 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -12,7 +12,6 @@
 #include <linux/errno.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/sched.h>	/* just for sched_clock() - funny that */
 #include <linux/timex.h>
 #include <linux/clockchips.h>
 
@@ -20,29 +19,9 @@
 #include <asm/sched_clock.h>
 #include <mach/hardware.h>
 
-/*
- * This is the SA11x0 sched_clock implementation.
- */
-static DEFINE_CLOCK_DATA(cd);
-
-/*
- * Constants generated by clocks_calc_mult_shift(m, s, 3.6864MHz,
- * NSEC_PER_SEC, 60).
- * This gives a resolution of about 271ns and a wrap period of about 19min.
- */
-#define SC_MULT		2275555556u
-#define SC_SHIFT	23
-
-unsigned long long notrace sched_clock(void)
-{
-	u32 cyc = OSCR;
-	return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0, SC_MULT, SC_SHIFT);
-}
-
-static void notrace sa1100_update_sched_clock(void)
+static u32 notrace sa1100_read_sched_clock(void)
 {
-	u32 cyc = OSCR;
-	update_sched_clock(&cd, cyc, (u32)~0);
+	return OSCR;
 }
 
 #define MIN_OSCR_DELTA 2
@@ -109,8 +88,7 @@ static void __init sa1100_timer_init(void)
 	OIER = 0;
 	OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3;
 
-	init_fixed_sched_clock(&cd, sa1100_update_sched_clock, 32,
-			       3686400, SC_MULT, SC_SHIFT);
+	setup_sched_clock(sa1100_read_sched_clock, 32, 3686400);
 
 	clockevents_calc_mult_shift(&ckevt_sa1100_osmr0, 3686400, 4);
 	ckevt_sa1100_osmr0.max_delta_ns =
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index feda3ca..a851c25 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -26,10 +26,9 @@
 #define ROMCARD_SIZE            0x08000000
 #define ROMCARD_START           0x10000000
 
-void arch_reset(char mode, const char *cmd)
+static void shark_restart(char mode, const char *cmd)
 {
         short temp;
-        local_irq_disable();
         /* Reset the Machine via pc[3] of the sequoia chipset */
         outw(0x09,0x24);
         temp=inw(0x26);
@@ -157,4 +156,5 @@ MACHINE_START(SHARK, "Shark")
 	.init_irq	= shark_init_irq,
 	.timer		= &shark_timer,
 	.dma_zone_size	= SZ_4M,
+	.restart	= shark_restart,
 MACHINE_END
diff --git a/arch/arm/mach-shark/include/mach/system.h b/arch/arm/mach-shark/include/mach/system.h
index 21c373b..1b2f2c5 100644
--- a/arch/arm/mach-shark/include/mach/system.h
+++ b/arch/arm/mach-shark/include/mach/system.h
@@ -6,9 +6,6 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-/* Found in arch/mach-shark/core.c */
-extern void arch_reset(char mode, const char *cmd);
-
 static inline void arch_idle(void)
 {
 }
diff --git a/arch/arm/mach-shark/include/mach/vmalloc.h b/arch/arm/mach-shark/include/mach/vmalloc.h
deleted file mode 100644
index b10df98..0000000
--- a/arch/arm/mach-shark/include/mach/vmalloc.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/vmalloc.h
- */
-#define VMALLOC_END       0xd0000000UL
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 737bdc6..5ca1f9d 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -28,7 +28,6 @@ pfc-$(CONFIG_ARCH_SH73A0)	+= pfc-sh73a0.o
 obj-$(CONFIG_ARCH_SH7367)	+= entry-intc.o
 obj-$(CONFIG_ARCH_SH7377)	+= entry-intc.o
 obj-$(CONFIG_ARCH_SH7372)	+= entry-intc.o
-obj-$(CONFIG_ARCH_SH73A0)	+= entry-gic.o
 
 # PM objects
 obj-$(CONFIG_SUSPEND)		+= suspend.o
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index b862e9f..a4e6ca0 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -466,8 +466,6 @@ static struct map_desc ag5evm_io_desc[] __initdata = {
 static void __init ag5evm_map_io(void)
 {
 	iotable_init(ag5evm_io_desc, ARRAY_SIZE(ag5evm_io_desc));
-	/* DMA memory at 0xf6000000 - 0xffdfffff */
-	init_consistent_dma_size(158 << 20);
 
 	/* setup early devices and console here as well */
 	sh73a0_add_early_devices();
@@ -607,8 +605,9 @@ struct sys_timer ag5evm_timer = {
 
 MACHINE_START(AG5EVM, "ag5evm")
 	.map_io		= ag5evm_map_io,
+	.nr_irqs	= NR_IRQS_LEGACY,
 	.init_irq	= sh73a0_init_irq,
-	.handle_irq	= shmobile_handle_irq_gic,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= ag5evm_init,
 	.timer		= &ag5evm_timer,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 4c865ec..6a6f9f7 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -1172,8 +1172,6 @@ static struct map_desc ap4evb_io_desc[] __initdata = {
 static void __init ap4evb_map_io(void)
 {
 	iotable_init(ap4evb_io_desc, ARRAY_SIZE(ap4evb_io_desc));
-	/* DMA memory at 0xf6000000 - 0xffdfffff */
-	init_consistent_dma_size(158 << 20);
 
 	/* setup early devices and console here as well */
 	sh7372_add_early_devices();
diff --git a/arch/arm/mach-shmobile/board-g3evm.c b/arch/arm/mach-shmobile/board-g3evm.c
index 8b620bf..72d5572 100644
--- a/arch/arm/mach-shmobile/board-g3evm.c
+++ b/arch/arm/mach-shmobile/board-g3evm.c
@@ -261,8 +261,6 @@ static struct map_desc g3evm_io_desc[] __initdata = {
 static void __init g3evm_map_io(void)
 {
 	iotable_init(g3evm_io_desc, ARRAY_SIZE(g3evm_io_desc));
-	/* DMA memory at 0xf6000000 - 0xffdfffff */
-	init_consistent_dma_size(158 << 20);
 
 	/* setup early devices and console here as well */
 	sh7367_add_early_devices();
diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c
index 7719ddc..2220b88 100644
--- a/arch/arm/mach-shmobile/board-g4evm.c
+++ b/arch/arm/mach-shmobile/board-g4evm.c
@@ -275,8 +275,6 @@ static struct map_desc g4evm_io_desc[] __initdata = {
 static void __init g4evm_map_io(void)
 {
 	iotable_init(g4evm_io_desc, ARRAY_SIZE(g4evm_io_desc));
-	/* DMA memory at 0xf6000000 - 0xffdfffff */
-	init_consistent_dma_size(158 << 20);
 
 	/* setup early devices and console here as well */
 	sh7377_add_early_devices();
diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c
index bd9a784..857ceee 100644
--- a/arch/arm/mach-shmobile/board-kota2.c
+++ b/arch/arm/mach-shmobile/board-kota2.c
@@ -33,6 +33,7 @@
 #include <linux/input/sh_keysc.h>
 #include <linux/gpio_keys.h>
 #include <linux/leds.h>
+#include <linux/platform_data/leds-renesas-tpu.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/sh_mmcif.h>
 #include <linux/mfd/tmio.h>
@@ -56,7 +57,7 @@ static struct resource smsc9220_resources[] = {
 		.flags		= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start		= gic_spi(33), /* PINTA2 @ PORT144 */
+		.start		= SH73A0_PINT0_IRQ(2), /* PINTA2 */
 		.flags		= IORESOURCE_IRQ,
 	},
 };
@@ -157,10 +158,6 @@ static struct platform_device gpio_keys_device = {
 #define GPIO_LED(n, g) { .name = n, .gpio = g }
 
 static struct gpio_led gpio_leds[] = {
-	GPIO_LED("V2513", GPIO_PORT153), /* PORT153 [TPU1T02] -> V2513 */
-	GPIO_LED("V2514", GPIO_PORT199), /* PORT199 [TPU4TO1] -> V2514 */
-	GPIO_LED("V2515", GPIO_PORT197), /* PORT197 [TPU2TO1] -> V2515 */
-	GPIO_LED("KEYLED", GPIO_PORT163), /* PORT163 [TPU3TO0] -> KEYLED */
 	GPIO_LED("G", GPIO_PORT20), /* PORT20 [GPO0] -> LED7 -> "G" */
 	GPIO_LED("H", GPIO_PORT21), /* PORT21 [GPO1] -> LED8 -> "H" */
 	GPIO_LED("J", GPIO_PORT22), /* PORT22 [GPO2] -> LED9 -> "J" */
@@ -179,6 +176,119 @@ static struct platform_device gpio_leds_device = {
 	},
 };
 
+/* TPU LED */
+static struct led_renesas_tpu_config led_renesas_tpu12_pdata = {
+	.name		= "V2513",
+	.pin_gpio_fn	= GPIO_FN_TPU1TO2,
+	.pin_gpio	= GPIO_PORT153,
+	.channel_offset = 0x90,
+	.timer_bit = 2,
+	.max_brightness = 1000,
+};
+
+static struct resource tpu12_resources[] = {
+	[0] = {
+		.name	= "TPU12",
+		.start	= 0xe6610090,
+		.end	= 0xe66100b5,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device leds_tpu12_device = {
+	.name = "leds-renesas-tpu",
+	.id = 12,
+	.dev = {
+		.platform_data  = &led_renesas_tpu12_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(tpu12_resources),
+	.resource	= tpu12_resources,
+};
+
+static struct led_renesas_tpu_config led_renesas_tpu41_pdata = {
+	.name		= "V2514",
+	.pin_gpio_fn	= GPIO_FN_TPU4TO1,
+	.pin_gpio	= GPIO_PORT199,
+	.channel_offset = 0x50,
+	.timer_bit = 1,
+	.max_brightness = 1000,
+};
+
+static struct resource tpu41_resources[] = {
+	[0] = {
+		.name	= "TPU41",
+		.start	= 0xe6640050,
+		.end	= 0xe6640075,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device leds_tpu41_device = {
+	.name = "leds-renesas-tpu",
+	.id = 41,
+	.dev = {
+		.platform_data  = &led_renesas_tpu41_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(tpu41_resources),
+	.resource	= tpu41_resources,
+};
+
+static struct led_renesas_tpu_config led_renesas_tpu21_pdata = {
+	.name		= "V2515",
+	.pin_gpio_fn	= GPIO_FN_TPU2TO1,
+	.pin_gpio	= GPIO_PORT197,
+	.channel_offset = 0x50,
+	.timer_bit = 1,
+	.max_brightness = 1000,
+};
+
+static struct resource tpu21_resources[] = {
+	[0] = {
+		.name	= "TPU21",
+		.start	= 0xe6620050,
+		.end	= 0xe6620075,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device leds_tpu21_device = {
+	.name = "leds-renesas-tpu",
+	.id = 21,
+	.dev = {
+		.platform_data  = &led_renesas_tpu21_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(tpu21_resources),
+	.resource	= tpu21_resources,
+};
+
+static struct led_renesas_tpu_config led_renesas_tpu30_pdata = {
+	.name		= "KEYLED",
+	.pin_gpio_fn	= GPIO_FN_TPU3TO0,
+	.pin_gpio	= GPIO_PORT163,
+	.channel_offset = 0x10,
+	.timer_bit = 0,
+	.max_brightness = 1000,
+};
+
+static struct resource tpu30_resources[] = {
+	[0] = {
+		.name	= "TPU30",
+		.start	= 0xe6630010,
+		.end	= 0xe6630035,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device leds_tpu30_device = {
+	.name = "leds-renesas-tpu",
+	.id = 30,
+	.dev = {
+		.platform_data  = &led_renesas_tpu30_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(tpu30_resources),
+	.resource	= tpu30_resources,
+};
+
 /* MMCIF */
 static struct resource mmcif_resources[] = {
 	[0] = {
@@ -291,6 +401,10 @@ static struct platform_device *kota2_devices[] __initdata = {
 	&keysc_device,
 	&gpio_keys_device,
 	&gpio_leds_device,
+	&leds_tpu12_device,
+	&leds_tpu41_device,
+	&leds_tpu21_device,
+	&leds_tpu30_device,
 	&mmcif_device,
 	&sdhi0_device,
 	&sdhi1_device,
@@ -317,18 +431,6 @@ static void __init kota2_map_io(void)
 	shmobile_setup_console();
 }
 
-#define PINTER0A	0xe69000a0
-#define PINTCR0A	0xe69000b0
-
-void __init kota2_init_irq(void)
-{
-	sh73a0_init_irq();
-
-	/* setup PINT: enable PINTA2 as active low */
-	__raw_writel(1 << 29, PINTER0A);
-	__raw_writew(2 << 10, PINTCR0A);
-}
-
 static void __init kota2_init(void)
 {
 	sh73a0_pinmux_init();
@@ -447,8 +549,9 @@ struct sys_timer kota2_timer = {
 
 MACHINE_START(KOTA2, "kota2")
 	.map_io		= kota2_map_io,
-	.init_irq	= kota2_init_irq,
-	.handle_irq	= shmobile_handle_irq_gic,
+	.nr_irqs	= NR_IRQS_LEGACY,
+	.init_irq	= sh73a0_init_irq,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= kota2_init,
 	.timer		= &kota2_timer,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 9c5e598..ed52566 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -1390,8 +1390,6 @@ static struct map_desc mackerel_io_desc[] __initdata = {
 static void __init mackerel_map_io(void)
 {
 	iotable_init(mackerel_io_desc, ARRAY_SIZE(mackerel_io_desc));
-	/* DMA memory at 0xf6000000 - 0xffdfffff */
-	init_consistent_dma_size(158 << 20);
 
 	/* setup early devices and console here as well */
 	sh7372_add_early_devices();
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index 8ea8c81..34944d0 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -131,6 +131,7 @@ static struct clk main_clk = {
 	.ops		= &main_clk_ops,
 };
 
+/* Divide Main clock by two */
 static struct clk main_div2_clk = {
 	.ops		= &div2_clk_ops,
 	.parent		= &main_clk,
@@ -328,7 +329,7 @@ static struct clk div6_clks[DIV6_NR] = {
 			vck_parent, ARRAY_SIZE(vck_parent), 12, 3),
 	[DIV6_VCK3] = SH_CLK_DIV6_EXT(VCLKCR3, 0,
 			vck_parent, ARRAY_SIZE(vck_parent), 12, 3),
-	[DIV6_ZB1] = SH_CLK_DIV6_EXT(ZBCKCR, 0,
+	[DIV6_ZB1] = SH_CLK_DIV6_EXT(ZBCKCR, CLK_ENABLE_ON_INIT,
 			pll_parent, ARRAY_SIZE(pll_parent), 7, 1),
 	[DIV6_FLCTL] = SH_CLK_DIV6_EXT(FLCKCR, 0,
 			pll_parent, ARRAY_SIZE(pll_parent), 7, 1),
@@ -370,6 +371,7 @@ enum { MSTP001,
 	MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
 	MSTP331, MSTP329, MSTP325, MSTP323, MSTP318,
 	MSTP314, MSTP313, MSTP312, MSTP311,
+	MSTP303, MSTP302, MSTP301, MSTP300,
 	MSTP411, MSTP410, MSTP403,
 	MSTP_NR };
 
@@ -403,6 +405,10 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP313] = MSTP(&div6_clks[DIV6_SDHI1], SMSTPCR3, 13, 0), /* SDHI1 */
 	[MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */
 	[MSTP311] = MSTP(&div6_clks[DIV6_SDHI2], SMSTPCR3, 11, 0), /* SDHI2 */
+	[MSTP303] = MSTP(&main_div2_clk, SMSTPCR3, 3, 0), /* TPU1 */
+	[MSTP302] = MSTP(&main_div2_clk, SMSTPCR3, 2, 0), /* TPU2 */
+	[MSTP301] = MSTP(&main_div2_clk, SMSTPCR3, 1, 0), /* TPU3 */
+	[MSTP300] = MSTP(&main_div2_clk, SMSTPCR3, 0, 0), /* TPU4 */
 	[MSTP411] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 11, 0), /* IIC3 */
 	[MSTP410] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 10, 0), /* IIC4 */
 	[MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */
@@ -452,6 +458,10 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
 	CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP311]), /* SDHI2 */
+	CLKDEV_DEV_ID("leds-renesas-tpu.12", &mstp_clks[MSTP303]), /* TPU1 */
+	CLKDEV_DEV_ID("leds-renesas-tpu.21", &mstp_clks[MSTP302]), /* TPU2 */
+	CLKDEV_DEV_ID("leds-renesas-tpu.30", &mstp_clks[MSTP301]), /* TPU3 */
+	CLKDEV_DEV_ID("leds-renesas-tpu.41", &mstp_clks[MSTP300]), /* TPU4 */
 	CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* I2C3 */
 	CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* I2C4 */
 	CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */
diff --git a/arch/arm/mach-shmobile/entry-gic.S b/arch/arm/mach-shmobile/entry-gic.S
deleted file mode 100644
index e20239b..0000000
--- a/arch/arm/mach-shmobile/entry-gic.S
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * ARM Interrupt demux handler using GIC
- *
- * Copyright (C) 2010 Magnus Damm
- * Copyright (C) 2011 Paul Mundt
- * Copyright (C) 2010 - 2011 Renesas Solutions Corp.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/assembler.h>
-#include <asm/entry-macro-multi.S>
-#include <asm/hardware/gic.h>
-#include <asm/hardware/entry-macro-gic.S>
-
-	arch_irq_handler shmobile_handle_irq_gic
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index d055d054..13a18d3 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -7,7 +7,6 @@ extern void shmobile_secondary_vector(void);
 struct clk;
 extern int clk_init(void);
 extern void shmobile_handle_irq_intc(struct pt_regs *);
-extern void shmobile_handle_irq_gic(struct pt_regs *);
 extern struct platform_suspend_ops shmobile_suspend_ops;
 struct cpuidle_driver;
 extern void (*shmobile_cpuidle_modes[])(void);
@@ -35,8 +34,8 @@ extern void sh7372_add_standard_devices(void);
 extern void sh7372_clock_init(void);
 extern void sh7372_pinmux_init(void);
 extern void sh7372_pm_init(void);
-extern void sh7372_resume_core_standby_a3sm(void);
-extern int sh7372_do_idle_a3sm(unsigned long unused);
+extern void sh7372_resume_core_standby_sysc(void);
+extern int sh7372_do_idle_sysc(unsigned long sleep_mode);
 extern struct clk sh7372_extal1_clk;
 extern struct clk sh7372_extal2_clk;
 
diff --git a/arch/arm/mach-shmobile/include/mach/entry-macro.S b/arch/arm/mach-shmobile/include/mach/entry-macro.S
index 8d4a416..2a57b29 100644
--- a/arch/arm/mach-shmobile/include/mach/entry-macro.S
+++ b/arch/arm/mach-shmobile/include/mach/entry-macro.S
@@ -18,14 +18,5 @@
 	.macro  disable_fiq
 	.endm
 
-	.macro  get_irqnr_preamble, base, tmp
-	.endm
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	.endm
-
-	.macro  test_for_ipi, irqnr, irqstat, base, tmp
-	.endm
-
 	.macro  arch_ret_to_user, tmp1, tmp2
 	.endm
diff --git a/arch/arm/mach-shmobile/include/mach/gpio.h b/arch/arm/mach-shmobile/include/mach/gpio.h
index 7bf0890..de795b4 100644
--- a/arch/arm/mach-shmobile/include/mach/gpio.h
+++ b/arch/arm/mach-shmobile/include/mach/gpio.h
@@ -12,8 +12,6 @@
 
 #include <linux/kernel.h>
 #include <linux/errno.h>
-
-#define ARCH_NR_GPIOS 1024
 #include <linux/sh_pfc.h>
 
 #ifdef CONFIG_GPIOLIB
diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h
index 84532f9..8254ab8 100644
--- a/arch/arm/mach-shmobile/include/mach/sh7372.h
+++ b/arch/arm/mach-shmobile/include/mach/sh7372.h
@@ -480,11 +480,10 @@ struct platform_device;
 struct sh7372_pm_domain {
 	struct generic_pm_domain genpd;
 	struct dev_power_governor *gov;
-	void (*suspend)(void);
+	int (*suspend)(void);
 	void (*resume)(void);
 	unsigned int bit_shift;
 	bool no_debug;
-	bool stay_on;
 };
 
 static inline struct sh7372_pm_domain *to_sh7372_pd(struct generic_pm_domain *d)
@@ -499,6 +498,7 @@ extern struct sh7372_pm_domain sh7372_d4;
 extern struct sh7372_pm_domain sh7372_a4r;
 extern struct sh7372_pm_domain sh7372_a3rv;
 extern struct sh7372_pm_domain sh7372_a3ri;
+extern struct sh7372_pm_domain sh7372_a4s;
 extern struct sh7372_pm_domain sh7372_a3sp;
 extern struct sh7372_pm_domain sh7372_a3sg;
 
@@ -515,5 +515,7 @@ extern void sh7372_pm_add_subdomain(struct sh7372_pm_domain *sh7372_pd,
 
 extern void sh7372_intcs_suspend(void);
 extern void sh7372_intcs_resume(void);
+extern void sh7372_intca_suspend(void);
+extern void sh7372_intca_resume(void);
 
 #endif /* __ASM_SH7372_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/system.h b/arch/arm/mach-shmobile/include/mach/system.h
index 76a687e..956ac18 100644
--- a/arch/arm/mach-shmobile/include/mach/system.h
+++ b/arch/arm/mach-shmobile/include/mach/system.h
@@ -8,7 +8,7 @@ static inline void arch_idle(void)
 
 static inline void arch_reset(char mode, const char *cmd)
 {
-	cpu_reset(0);
+	soft_restart(0);
 }
 
 #endif
diff --git a/arch/arm/mach-shmobile/include/mach/vmalloc.h b/arch/arm/mach-shmobile/include/mach/vmalloc.h
deleted file mode 100644
index 2b8fd8b..0000000
--- a/arch/arm/mach-shmobile/include/mach/vmalloc.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ASM_MACH_VMALLOC_H
-#define __ASM_MACH_VMALLOC_H
-
-/* Vmalloc at ... - 0xe5ffffff */
-#define VMALLOC_END 0xe6000000UL
-
-#endif /* __ASM_MACH_VMALLOC_H */
diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c
index 2d8856d..89afcab 100644
--- a/arch/arm/mach-shmobile/intc-sh7372.c
+++ b/arch/arm/mach-shmobile/intc-sh7372.c
@@ -535,6 +535,7 @@ static struct resource intcs_resources[] __initdata = {
 static struct intc_desc intcs_desc __initdata = {
 	.name = "sh7372-intcs",
 	.force_enable = ENABLED_INTCS,
+	.skip_syscore_suspend = true,
 	.resource = intcs_resources,
 	.num_resources = ARRAY_SIZE(intcs_resources),
 	.hw = INTC_HW_DESC(intcs_vectors, intcs_groups, intcs_mask_registers,
@@ -611,3 +612,52 @@ void sh7372_intcs_resume(void)
 	for (k = 0x80; k <= 0x9c; k += 4)
 		__raw_writeb(ffd5[k], intcs_ffd5 + k);
 }
+
+static unsigned short e694[0x200];
+static unsigned short e695[0x200];
+
+void sh7372_intca_suspend(void)
+{
+	int k;
+
+	for (k = 0x00; k <= 0x38; k += 4)
+		e694[k] = __raw_readw(0xe6940000 + k);
+
+	for (k = 0x80; k <= 0xb4; k += 4)
+		e694[k] = __raw_readb(0xe6940000 + k);
+
+	for (k = 0x180; k <= 0x1b4; k += 4)
+		e694[k] = __raw_readb(0xe6940000 + k);
+
+	for (k = 0x00; k <= 0x50; k += 4)
+		e695[k] = __raw_readw(0xe6950000 + k);
+
+	for (k = 0x80; k <= 0xa8; k += 4)
+		e695[k] = __raw_readb(0xe6950000 + k);
+
+	for (k = 0x180; k <= 0x1a8; k += 4)
+		e695[k] = __raw_readb(0xe6950000 + k);
+}
+
+void sh7372_intca_resume(void)
+{
+	int k;
+
+	for (k = 0x00; k <= 0x38; k += 4)
+		__raw_writew(e694[k], 0xe6940000 + k);
+
+	for (k = 0x80; k <= 0xb4; k += 4)
+		__raw_writeb(e694[k], 0xe6940000 + k);
+
+	for (k = 0x180; k <= 0x1b4; k += 4)
+		__raw_writeb(e694[k], 0xe6940000 + k);
+
+	for (k = 0x00; k <= 0x50; k += 4)
+		__raw_writew(e695[k], 0xe6950000 + k);
+
+	for (k = 0x80; k <= 0xa8; k += 4)
+		__raw_writeb(e695[k], 0xe6950000 + k);
+
+	for (k = 0x180; k <= 0x1a8; k += 4)
+		__raw_writeb(e695[k], 0xe6950000 + k);
+}
diff --git a/arch/arm/mach-shmobile/pm-sh7372.c b/arch/arm/mach-shmobile/pm-sh7372.c
index 34bbcbf..77b8fc1 100644
--- a/arch/arm/mach-shmobile/pm-sh7372.c
+++ b/arch/arm/mach-shmobile/pm-sh7372.c
@@ -82,11 +82,12 @@ static int pd_power_down(struct generic_pm_domain *genpd)
 	struct sh7372_pm_domain *sh7372_pd = to_sh7372_pd(genpd);
 	unsigned int mask = 1 << sh7372_pd->bit_shift;
 
-	if (sh7372_pd->suspend)
-		sh7372_pd->suspend();
+	if (sh7372_pd->suspend) {
+		int ret = sh7372_pd->suspend();
 
-	if (sh7372_pd->stay_on)
-		return 0;
+		if (ret)
+			return ret;
+	}
 
 	if (__raw_readl(PSTR) & mask) {
 		unsigned int retry_count;
@@ -101,8 +102,8 @@ static int pd_power_down(struct generic_pm_domain *genpd)
 	}
 
 	if (!sh7372_pd->no_debug)
-		pr_debug("sh7372 power domain down 0x%08x -> PSTR = 0x%08x\n",
-			 mask, __raw_readl(PSTR));
+		pr_debug("%s: Power off, 0x%08x -> PSTR = 0x%08x\n",
+			 genpd->name, mask, __raw_readl(PSTR));
 
 	return 0;
 }
@@ -113,9 +114,6 @@ static int __pd_power_up(struct sh7372_pm_domain *sh7372_pd, bool do_resume)
 	unsigned int retry_count;
 	int ret = 0;
 
-	if (sh7372_pd->stay_on)
-		goto out;
-
 	if (__raw_readl(PSTR) & mask)
 		goto out;
 
@@ -133,8 +131,8 @@ static int __pd_power_up(struct sh7372_pm_domain *sh7372_pd, bool do_resume)
 		ret = -EIO;
 
 	if (!sh7372_pd->no_debug)
-		pr_debug("sh7372 power domain up 0x%08x -> PSTR = 0x%08x\n",
-			 mask, __raw_readl(PSTR));
+		pr_debug("%s: Power on, 0x%08x -> PSTR = 0x%08x\n",
+			 sh7372_pd->genpd.name, mask, __raw_readl(PSTR));
 
  out:
 	if (ret == 0 && sh7372_pd->resume && do_resume)
@@ -148,35 +146,60 @@ static int pd_power_up(struct generic_pm_domain *genpd)
 	 return __pd_power_up(to_sh7372_pd(genpd), true);
 }
 
-static void sh7372_a4r_suspend(void)
+static int sh7372_a4r_suspend(void)
 {
 	sh7372_intcs_suspend();
 	__raw_writel(0x300fffff, WUPRMSK); /* avoid wakeup */
+	return 0;
 }
 
 static bool pd_active_wakeup(struct device *dev)
 {
-	return true;
+	bool (*active_wakeup)(struct device *dev);
+
+	active_wakeup = dev_gpd_data(dev)->ops.active_wakeup;
+	return active_wakeup ? active_wakeup(dev) : true;
 }
 
-static bool sh7372_power_down_forbidden(struct dev_pm_domain *domain)
+static int sh7372_stop_dev(struct device *dev)
 {
-	return false;
+	int (*stop)(struct device *dev);
+
+	stop = dev_gpd_data(dev)->ops.stop;
+	if (stop) {
+		int ret = stop(dev);
+		if (ret)
+			return ret;
+	}
+	return pm_clk_suspend(dev);
 }
 
-struct dev_power_governor sh7372_always_on_gov = {
-	.power_down_ok = sh7372_power_down_forbidden,
-};
+static int sh7372_start_dev(struct device *dev)
+{
+	int (*start)(struct device *dev);
+	int ret;
+
+	ret = pm_clk_resume(dev);
+	if (ret)
+		return ret;
+
+	start = dev_gpd_data(dev)->ops.start;
+	if (start)
+		ret = start(dev);
+
+	return ret;
+}
 
 void sh7372_init_pm_domain(struct sh7372_pm_domain *sh7372_pd)
 {
 	struct generic_pm_domain *genpd = &sh7372_pd->genpd;
+	struct dev_power_governor *gov = sh7372_pd->gov;
 
-	pm_genpd_init(genpd, sh7372_pd->gov, false);
-	genpd->stop_device = pm_clk_suspend;
-	genpd->start_device = pm_clk_resume;
+	pm_genpd_init(genpd, gov ? : &simple_qos_governor, false);
+	genpd->dev_ops.stop = sh7372_stop_dev;
+	genpd->dev_ops.start = sh7372_start_dev;
+	genpd->dev_ops.active_wakeup = pd_active_wakeup;
 	genpd->dev_irq_safe = true;
-	genpd->active_wakeup = pd_active_wakeup;
 	genpd->power_off = pd_power_down;
 	genpd->power_on = pd_power_up;
 	__pd_power_up(sh7372_pd, false);
@@ -199,48 +222,73 @@ void sh7372_pm_add_subdomain(struct sh7372_pm_domain *sh7372_pd,
 }
 
 struct sh7372_pm_domain sh7372_a4lc = {
+	.genpd.name = "A4LC",
 	.bit_shift = 1,
 };
 
 struct sh7372_pm_domain sh7372_a4mp = {
+	.genpd.name = "A4MP",
 	.bit_shift = 2,
 };
 
 struct sh7372_pm_domain sh7372_d4 = {
+	.genpd.name = "D4",
 	.bit_shift = 3,
 };
 
 struct sh7372_pm_domain sh7372_a4r = {
+	.genpd.name = "A4R",
 	.bit_shift = 5,
-	.gov = &sh7372_always_on_gov,
 	.suspend = sh7372_a4r_suspend,
 	.resume = sh7372_intcs_resume,
-	.stay_on = true,
 };
 
 struct sh7372_pm_domain sh7372_a3rv = {
+	.genpd.name = "A3RV",
 	.bit_shift = 6,
 };
 
 struct sh7372_pm_domain sh7372_a3ri = {
+	.genpd.name = "A3RI",
 	.bit_shift = 8,
 };
 
-struct sh7372_pm_domain sh7372_a3sp = {
-	.bit_shift = 11,
-	.gov = &sh7372_always_on_gov,
+static int sh7372_a4s_suspend(void)
+{
+	/*
+	 * The A4S domain contains the CPU core and therefore it should
+	 * only be turned off if the CPU is in use.
+	 */
+	return -EBUSY;
+}
+
+struct sh7372_pm_domain sh7372_a4s = {
+	.genpd.name = "A4S",
+	.bit_shift = 10,
+	.gov = &pm_domain_always_on_gov,
 	.no_debug = true,
+	.suspend = sh7372_a4s_suspend,
 };
 
-static void sh7372_a3sp_init(void)
+static int sh7372_a3sp_suspend(void)
 {
-	/* serial consoles make use of SCIF hardware located in A3SP,
+	/*
+	 * Serial consoles make use of SCIF hardware located in A3SP,
 	 * keep such power domain on if "no_console_suspend" is set.
 	 */
-	sh7372_a3sp.stay_on = !console_suspend_enabled;
+	return console_suspend_enabled ? -EBUSY : 0;
 }
 
+struct sh7372_pm_domain sh7372_a3sp = {
+	.genpd.name = "A3SP",
+	.bit_shift = 11,
+	.gov = &pm_domain_always_on_gov,
+	.no_debug = true,
+	.suspend = sh7372_a3sp_suspend,
+};
+
 struct sh7372_pm_domain sh7372_a3sg = {
+	.genpd.name = "A3SG",
 	.bit_shift = 13,
 };
 
@@ -257,11 +305,16 @@ static int sh7372_do_idle_core_standby(unsigned long unused)
 	return 0;
 }
 
-static void sh7372_enter_core_standby(void)
+static void sh7372_set_reset_vector(unsigned long address)
 {
 	/* set reset vector, translate 4k */
-	__raw_writel(__pa(sh7372_resume_core_standby_a3sm), SBAR);
+	__raw_writel(address, SBAR);
 	__raw_writel(0, APARMBAREA);
+}
+
+static void sh7372_enter_core_standby(void)
+{
+	sh7372_set_reset_vector(__pa(sh7372_resume_core_standby_sysc));
 
 	/* enter sleep mode with SYSTBCR to 0x10 */
 	__raw_writel(0x10, SYSTBCR);
@@ -274,27 +327,22 @@ static void sh7372_enter_core_standby(void)
 #endif
 
 #ifdef CONFIG_SUSPEND
-static void sh7372_enter_a3sm_common(int pllc0_on)
+static void sh7372_enter_sysc(int pllc0_on, unsigned long sleep_mode)
 {
-	/* set reset vector, translate 4k */
-	__raw_writel(__pa(sh7372_resume_core_standby_a3sm), SBAR);
-	__raw_writel(0, APARMBAREA);
-
 	if (pllc0_on)
 		__raw_writel(0, PLLC01STPCR);
 	else
 		__raw_writel(1 << 28, PLLC01STPCR);
 
-	__raw_writel(0, PDNSEL); /* power-down A3SM only, not A4S */
 	__raw_readl(WUPSFAC); /* read wakeup int. factor before sleep */
-	cpu_suspend(0, sh7372_do_idle_a3sm);
+	cpu_suspend(sleep_mode, sh7372_do_idle_sysc);
 	__raw_readl(WUPSFAC); /* read wakeup int. factor after wakeup */
 
 	 /* disable reset vector translation */
 	__raw_writel(0, SBAR);
 }
 
-static int sh7372_a3sm_valid(unsigned long *mskp, unsigned long *msk2p)
+static int sh7372_sysc_valid(unsigned long *mskp, unsigned long *msk2p)
 {
 	unsigned long mstpsr0, mstpsr1, mstpsr2, mstpsr3, mstpsr4;
 	unsigned long msk, msk2;
@@ -382,7 +430,7 @@ static void sh7372_icr_to_irqcr(unsigned long icr, u16 *irqcr1p, u16 *irqcr2p)
 	*irqcr2p = irqcr2;
 }
 
-static void sh7372_setup_a3sm(unsigned long msk, unsigned long msk2)
+static void sh7372_setup_sysc(unsigned long msk, unsigned long msk2)
 {
 	u16 irqcrx_low, irqcrx_high, irqcry_low, irqcry_high;
 	unsigned long tmp;
@@ -415,6 +463,22 @@ static void sh7372_setup_a3sm(unsigned long msk, unsigned long msk2)
 	__raw_writel((irqcrx_high << 16) | irqcrx_low, IRQCR3);
 	__raw_writel((irqcry_high << 16) | irqcry_low, IRQCR4);
 }
+
+static void sh7372_enter_a3sm_common(int pllc0_on)
+{
+	sh7372_set_reset_vector(__pa(sh7372_resume_core_standby_sysc));
+	sh7372_enter_sysc(pllc0_on, 1 << 12);
+}
+
+static void sh7372_enter_a4s_common(int pllc0_on)
+{
+	sh7372_intca_suspend();
+	memcpy((void *)SMFRAM, sh7372_resume_core_standby_sysc, 0x100);
+	sh7372_set_reset_vector(SMFRAM);
+	sh7372_enter_sysc(pllc0_on, 1 << 10);
+	sh7372_intca_resume();
+}
+
 #endif
 
 #ifdef CONFIG_CPU_IDLE
@@ -448,14 +512,20 @@ static int sh7372_enter_suspend(suspend_state_t suspend_state)
 	unsigned long msk, msk2;
 
 	/* check active clocks to determine potential wakeup sources */
-	if (sh7372_a3sm_valid(&msk, &msk2)) {
-
+	if (sh7372_sysc_valid(&msk, &msk2)) {
 		/* convert INTC mask and sense to SYSC mask and sense */
-		sh7372_setup_a3sm(msk, msk2);
-
-		/* enter A3SM sleep with PLLC0 off */
-		pr_debug("entering A3SM\n");
-		sh7372_enter_a3sm_common(0);
+		sh7372_setup_sysc(msk, msk2);
+
+		if (!console_suspend_enabled &&
+		    sh7372_a4s.genpd.status == GPD_STATE_POWER_OFF) {
+			/* enter A4S sleep with PLLC0 off */
+			pr_debug("entering A4S\n");
+			sh7372_enter_a4s_common(0);
+		} else {
+			/* enter A3SM sleep with PLLC0 off */
+			pr_debug("entering A3SM\n");
+			sh7372_enter_a3sm_common(0);
+		}
 	} else {
 		/* default to Core Standby that supports all wakeup sources */
 		pr_debug("entering Core Standby\n");
@@ -464,9 +534,37 @@ static int sh7372_enter_suspend(suspend_state_t suspend_state)
 	return 0;
 }
 
+/**
+ * sh7372_pm_notifier_fn - SH7372 PM notifier routine.
+ * @notifier: Unused.
+ * @pm_event: Event being handled.
+ * @unused: Unused.
+ */
+static int sh7372_pm_notifier_fn(struct notifier_block *notifier,
+				 unsigned long pm_event, void *unused)
+{
+	switch (pm_event) {
+	case PM_SUSPEND_PREPARE:
+		/*
+		 * This is necessary, because the A4R domain has to be "on"
+		 * when suspend_device_irqs() and resume_device_irqs() are
+		 * executed during system suspend and resume, respectively, so
+		 * that those functions don't crash while accessing the INTCS.
+		 */
+		pm_genpd_poweron(&sh7372_a4r.genpd);
+		break;
+	case PM_POST_SUSPEND:
+		pm_genpd_poweroff_unused();
+		break;
+	}
+
+	return NOTIFY_DONE;
+}
+
 static void sh7372_suspend_init(void)
 {
 	shmobile_suspend_ops.enter = sh7372_enter_suspend;
+	pm_notifier(sh7372_pm_notifier_fn, 0);
 }
 #else
 static void sh7372_suspend_init(void) {}
@@ -482,8 +580,6 @@ void __init sh7372_pm_init(void)
 	/* do not convert A3SM, A3SP, A3SG, A4R power down into A4S */
 	__raw_writel(0, PDNSEL);
 
-	sh7372_a3sp_init();
-
 	sh7372_suspend_init();
 	sh7372_cpuidle_init();
 }
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index 2380389..c197f9d 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -994,12 +994,16 @@ void __init sh7372_add_standard_devices(void)
 	sh7372_init_pm_domain(&sh7372_a4r);
 	sh7372_init_pm_domain(&sh7372_a3rv);
 	sh7372_init_pm_domain(&sh7372_a3ri);
-	sh7372_init_pm_domain(&sh7372_a3sg);
+	sh7372_init_pm_domain(&sh7372_a4s);
 	sh7372_init_pm_domain(&sh7372_a3sp);
+	sh7372_init_pm_domain(&sh7372_a3sg);
 
 	sh7372_pm_add_subdomain(&sh7372_a4lc, &sh7372_a3rv);
 	sh7372_pm_add_subdomain(&sh7372_a4r, &sh7372_a4lc);
 
+	sh7372_pm_add_subdomain(&sh7372_a4s, &sh7372_a3sg);
+	sh7372_pm_add_subdomain(&sh7372_a4s, &sh7372_a3sp);
+
 	platform_add_devices(sh7372_early_devices,
 			    ARRAY_SIZE(sh7372_early_devices));
 
diff --git a/arch/arm/mach-shmobile/sleep-sh7372.S b/arch/arm/mach-shmobile/sleep-sh7372.S
index f3ab3c5..1d56467 100644
--- a/arch/arm/mach-shmobile/sleep-sh7372.S
+++ b/arch/arm/mach-shmobile/sleep-sh7372.S
@@ -37,13 +37,18 @@
 #if defined(CONFIG_SUSPEND) || defined(CONFIG_CPU_IDLE)
 	.align	12
 	.text
-	.global sh7372_resume_core_standby_a3sm
-sh7372_resume_core_standby_a3sm:
+	.global sh7372_resume_core_standby_sysc
+sh7372_resume_core_standby_sysc:
 	ldr     pc, 1f
 1:	.long   cpu_resume - PAGE_OFFSET + PLAT_PHYS_OFFSET
 
-	.global	sh7372_do_idle_a3sm
-sh7372_do_idle_a3sm:
+#define SPDCR 0xe6180008
+
+	/* A3SM & A4S power down */
+	.global	sh7372_do_idle_sysc
+sh7372_do_idle_sysc:
+	mov	r8, r0 /* sleep mode passed in r0 */
+
 	/*
 	 * Clear the SCTLR.C bit to prevent further data cache
 	 * allocation. Clearing SCTLR.C would make all the data accesses
@@ -80,13 +85,9 @@ sh7372_do_idle_a3sm:
 	dsb
 	dmb
 
-#define SPDCR 0xe6180008
-#define A3SM (1 << 12)
-
-	/* A3SM power down */
+	/* SYSC power down */
 	ldr     r0, =SPDCR
-	ldr     r1, =A3SM
-	str     r1, [r0]
+	str     r8, [r0]
 1:
 	b      1b
 
diff --git a/arch/arm/mach-spear3xx/include/mach/entry-macro.S b/arch/arm/mach-spear3xx/include/mach/entry-macro.S
index 53da422..de3bb41 100644
--- a/arch/arm/mach-spear3xx/include/mach/entry-macro.S
+++ b/arch/arm/mach-spear3xx/include/mach/entry-macro.S
@@ -11,35 +11,8 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <asm/hardware/vic.h>
-#include <mach/hardware.h>
-
 		.macro	disable_fiq
 		.endm
 
-		.macro	get_irqnr_preamble, base, tmp
-		.endm
-
 		.macro	arch_ret_to_user, tmp1, tmp2
 		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\base, =VA_SPEAR3XX_ML1_VIC_BASE
-		ldr	\irqstat, [\base, #VIC_IRQ_STATUS]	@ get status
-		teq	\irqstat, #0
-		beq	1001f				@ this will set/reset
-							@ zero register
-		/*
-		 * Following code will find bit position of least significang
-		 * bit set in irqstat, using following equation
-		 * least significant bit set in n = (n & ~(n-1))
-		 */
-		sub	\tmp, \irqstat, #1		@ tmp = irqstat - 1
-		mvn	\tmp, \tmp			@ tmp = ~tmp
-		and	\irqstat, \irqstat, \tmp	@ irqstat &= tmp
-		/* Now, irqstat is = bit no. of 1st bit set in vic irq status */
-		clz	\tmp, \irqstat			@ tmp = leading zeros
-		rsb	\irqnr, \tmp, #0x1F		@ irqnr = 32 - tmp - 1
-
-1001:		/* EQ will be set if no irqs pending */
-		.endm
diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h
index b8f31c3..14276e5 100644
--- a/arch/arm/mach-spear3xx/include/mach/generic.h
+++ b/arch/arm/mach-spear3xx/include/mach/generic.h
@@ -42,6 +42,8 @@ void __init spear3xx_map_io(void);
 void __init spear3xx_init_irq(void);
 void __init spear3xx_init(void);
 
+void spear_restart(char, const char *);
+
 /* pad mux declarations */
 #define PMX_FIRDA_MASK		(1 << 14)
 #define PMX_I2C_MASK		(1 << 13)
diff --git a/arch/arm/mach-spear3xx/include/mach/vmalloc.h b/arch/arm/mach-spear3xx/include/mach/vmalloc.h
deleted file mode 100644
index df977b3..0000000
--- a/arch/arm/mach-spear3xx/include/mach/vmalloc.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/vmalloc.h
- *
- * Defining Vmalloc area for SPEAr3xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_VMALLOC_H
-#define __MACH_VMALLOC_H
-
-#include <plat/vmalloc.h>
-
-#endif /* __MACH_VMALLOC_H */
diff --git a/arch/arm/mach-spear3xx/spear300_evb.c b/arch/arm/mach-spear3xx/spear300_evb.c
index a5ff98e..3462ab9 100644
--- a/arch/arm/mach-spear3xx/spear300_evb.c
+++ b/arch/arm/mach-spear3xx/spear300_evb.c
@@ -11,6 +11,7 @@
  * warranty of any kind, whether express or implied.
  */
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 #include <mach/generic.h>
@@ -67,6 +68,8 @@ MACHINE_START(SPEAR300, "ST-SPEAR300-EVB")
 	.atag_offset	=	0x100,
 	.map_io		=	spear3xx_map_io,
 	.init_irq	=	spear3xx_init_irq,
+	.handle_irq	=	vic_handle_irq,
 	.timer		=	&spear3xx_timer,
 	.init_machine	=	spear300_evb_init,
+	.restart	=	spear_restart,
 MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear310_evb.c b/arch/arm/mach-spear3xx/spear310_evb.c
index 45d180d..f92c499 100644
--- a/arch/arm/mach-spear3xx/spear310_evb.c
+++ b/arch/arm/mach-spear3xx/spear310_evb.c
@@ -11,6 +11,7 @@
  * warranty of any kind, whether express or implied.
  */
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 #include <mach/generic.h>
@@ -73,6 +74,8 @@ MACHINE_START(SPEAR310, "ST-SPEAR310-EVB")
 	.atag_offset	=	0x100,
 	.map_io		=	spear3xx_map_io,
 	.init_irq	=	spear3xx_init_irq,
+	.handle_irq	=	vic_handle_irq,
 	.timer		=	&spear3xx_timer,
 	.init_machine	=	spear310_evb_init,
+	.restart	=	spear_restart,
 MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear320_evb.c b/arch/arm/mach-spear3xx/spear320_evb.c
index 2287984..105334a 100644
--- a/arch/arm/mach-spear3xx/spear320_evb.c
+++ b/arch/arm/mach-spear3xx/spear320_evb.c
@@ -11,6 +11,7 @@
  * warranty of any kind, whether express or implied.
  */
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 #include <mach/generic.h>
@@ -71,6 +72,8 @@ MACHINE_START(SPEAR320, "ST-SPEAR320-EVB")
 	.atag_offset	=	0x100,
 	.map_io		=	spear3xx_map_io,
 	.init_irq	=	spear3xx_init_irq,
+	.handle_irq	=	vic_handle_irq,
 	.timer		=	&spear3xx_timer,
 	.init_machine	=	spear320_evb_init,
+	.restart	=	spear_restart,
 MACHINE_END
diff --git a/arch/arm/mach-spear6xx/include/mach/entry-macro.S b/arch/arm/mach-spear6xx/include/mach/entry-macro.S
index 8a0b0ed..d490a91 100644
--- a/arch/arm/mach-spear6xx/include/mach/entry-macro.S
+++ b/arch/arm/mach-spear6xx/include/mach/entry-macro.S
@@ -11,44 +11,8 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <asm/hardware/vic.h>
-#include <mach/hardware.h>
-
 		.macro	disable_fiq
 		.endm
 
-		.macro	get_irqnr_preamble, base, tmp
-		.endm
-
 		.macro	arch_ret_to_user, tmp1, tmp2
 		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\base, =VA_SPEAR6XX_CPU_VIC_PRI_BASE
-		ldr	\irqstat, [\base, #VIC_IRQ_STATUS]	@ get status
-		mov	\irqnr, #0
-		teq	\irqstat, #0
-		bne	1001f
-		ldr	\base, =VA_SPEAR6XX_CPU_VIC_SEC_BASE
-		ldr	\irqstat, [\base, #VIC_IRQ_STATUS]	@ get status
-		teq	\irqstat, #0
-		beq	1002f				@ this will set/reset
-							@ zero register
-		mov	\irqnr, #32
-1001:
-		/*
-		 * Following code will find bit position of least significang
-		 * bit set in irqstat, using following equation
-		 * least significant bit set in n = (n & ~(n-1))
-		 */
-		sub	\tmp, \irqstat, #1		@ tmp = irqstat - 1
-		mvn	\tmp, \tmp			@ tmp = ~tmp
-		and	\irqstat, \irqstat, \tmp	@ irqstat &= tmp
-		/* Now, irqstat is = bit no. of 1st bit set in vic irq status */
-		clz	\tmp, \irqstat			@ tmp = leading zeros
-
-		rsb	\tmp, \tmp, #0x1F		@ tmp = 32 - tmp - 1
-		add	\irqnr, \irqnr, \tmp
-
-1002:		/* EQ will be set if no irqs pending */
-		.endm
diff --git a/arch/arm/mach-spear6xx/include/mach/generic.h b/arch/arm/mach-spear6xx/include/mach/generic.h
index 183f023..116b993 100644
--- a/arch/arm/mach-spear6xx/include/mach/generic.h
+++ b/arch/arm/mach-spear6xx/include/mach/generic.h
@@ -41,6 +41,8 @@ void __init spear6xx_init(void);
 void __init spear600_init(void);
 void __init spear6xx_clk_init(void);
 
+void spear_restart(char, const char *);
+
 /* Add spear600 machine device structure declarations here */
 
 #endif /* __MACH_GENERIC_H */
diff --git a/arch/arm/mach-spear6xx/include/mach/vmalloc.h b/arch/arm/mach-spear6xx/include/mach/vmalloc.h
deleted file mode 100644
index 4a0b56c..0000000
--- a/arch/arm/mach-spear6xx/include/mach/vmalloc.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/include/mach/vmalloc.h
- *
- * Defining Vmalloc area for SPEAr6xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_VMALLOC_H
-#define __MACH_VMALLOC_H
-
-#include <plat/vmalloc.h>
-
-#endif	/* __MACH_VMALLOC_H */
diff --git a/arch/arm/mach-spear6xx/spear600_evb.c b/arch/arm/mach-spear6xx/spear600_evb.c
index 8238fe3..c6e4254 100644
--- a/arch/arm/mach-spear6xx/spear600_evb.c
+++ b/arch/arm/mach-spear6xx/spear600_evb.c
@@ -11,6 +11,7 @@
  * warranty of any kind, whether express or implied.
  */
 
+#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 #include <mach/generic.h>
@@ -46,6 +47,8 @@ MACHINE_START(SPEAR600, "ST-SPEAR600-EVB")
 	.atag_offset	=	0x100,
 	.map_io		=	spear6xx_map_io,
 	.init_irq	=	spear6xx_init_irq,
+	.handle_irq	=	vic_handle_irq,
 	.timer		=	&spear6xx_timer,
 	.init_machine	=	spear600_evb_init,
+	.restart	=	spear_restart,
 MACHINE_END
diff --git a/arch/arm/mach-tcc8k/Kconfig b/arch/arm/mach-tcc8k/Kconfig
deleted file mode 100644
index ad86415..0000000
--- a/arch/arm/mach-tcc8k/Kconfig
+++ /dev/null
@@ -1,11 +0,0 @@
-if ARCH_TCC8K
-
-comment "TCC8000 systems:"
-
-config MACH_TCC8000_SDK
-	bool "Telechips TCC8000-SDK development kit"
-	default y
-	help
-	  Support for the Telechips TCC8000-SDK board.
-
-endif
diff --git a/arch/arm/mach-tcc8k/Makefile b/arch/arm/mach-tcc8k/Makefile
deleted file mode 100644
index 9bacf31..0000000
--- a/arch/arm/mach-tcc8k/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# Makefile for TCC8K boards and common files.
-#
-
-# Common support
-obj-y += clock.o irq.o time.o io.o devices.o
-
-# Board specific support
-obj-$(CONFIG_MACH_TCC8000_SDK) += board-tcc8000-sdk.o
diff --git a/arch/arm/mach-tcc8k/Makefile.boot b/arch/arm/mach-tcc8k/Makefile.boot
deleted file mode 100644
index 5e02d41..0000000
--- a/arch/arm/mach-tcc8k/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-   zreladdr-y		+= 0x20008000
-params_phys-y		:= 0x20000100
-initrd_phys-y		:= 0x20800000
diff --git a/arch/arm/mach-tcc8k/board-tcc8000-sdk.c b/arch/arm/mach-tcc8k/board-tcc8000-sdk.c
deleted file mode 100644
index 777a5bb..0000000
--- a/arch/arm/mach-tcc8k/board-tcc8000-sdk.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include <mach/clock.h>
-#include <mach/tcc-nand.h>
-#include <mach/tcc8k-regs.h>
-
-#include "common.h"
-
-#define XI_FREQUENCY	12000000
-#define XTI_FREQUENCY	32768
-
-#ifdef CONFIG_MTD_NAND_TCC
-/* NAND */
-static struct tcc_nand_platform_data tcc8k_sdk_nand_data = {
-	.width = 1,
-	.hw_ecc = 0,
-};
-#endif
-
-static void __init tcc8k_init(void)
-{
-#ifdef CONFIG_MTD_NAND_TCC
-	tcc_nand_device.dev.platform_data = &tcc8k_sdk_nand_data;
-	platform_device_register(&tcc_nand_device);
-#endif
-}
-
-static void __init tcc8k_init_timer(void)
-{
-	tcc_clocks_init(XI_FREQUENCY, XTI_FREQUENCY);
-}
-
-static struct sys_timer tcc8k_timer = {
-	.init	= tcc8k_init_timer,
-};
-
-static void __init tcc8k_map_io(void)
-{
-	tcc8k_map_common_io();
-
-	/* set PLL0 clock to 96MHz, adapt UART0 divisor */
-	__raw_writel(0x00026003, CKC_BASE + PLL0CFG_OFFS);
-	__raw_writel(0x10000001, CKC_BASE + ACLKUART0_OFFS);
-
-	/* set PLL1 clock to 192MHz */
-	__raw_writel(0x00016003, CKC_BASE + PLL1CFG_OFFS);
-
-	/* set PLL2 clock to 48MHz */
-	__raw_writel(0x00036003, CKC_BASE + PLL2CFG_OFFS);
-
-	/* with CPU freq higher than 150 MHz, need extra DTCM wait */
-	__raw_writel(0x00000001, SCFG_BASE + DTCMWAIT_OFFS);
-
-	/* PLL locking time as specified */
-	udelay(300);
-}
-
-MACHINE_START(TCC8000_SDK, "Telechips TCC8000-SDK Demo Board")
-	.atag_offset	= 0x100,
-	.map_io		= tcc8k_map_io,
-	.init_irq	= tcc8k_init_irq,
-	.init_machine	= tcc8k_init,
-	.timer		= &tcc8k_timer,
-MACHINE_END
diff --git a/arch/arm/mach-tcc8k/clock.c b/arch/arm/mach-tcc8k/clock.c
deleted file mode 100644
index e7cdae5..0000000
--- a/arch/arm/mach-tcc8k/clock.c
+++ /dev/null
@@ -1,580 +0,0 @@
-/*
- * Lowlevel clock handling for Telechips TCC8xxx SoCs
- *
- * Copyright (C) 2010 by Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GPL v2
- */
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/clkdev.h>
-
-#include <mach/clock.h>
-#include <mach/irqs.h>
-#include <mach/tcc8k-regs.h>
-
-#include "common.h"
-
-#define BCLKCTR0	(CKC_BASE + BCLKCTR0_OFFS)
-#define BCLKCTR1	(CKC_BASE + BCLKCTR1_OFFS)
-
-#define ACLKREF		(CKC_BASE + ACLKREF_OFFS)
-#define ACLKUART0	(CKC_BASE + ACLKUART0_OFFS)
-#define ACLKUART1	(CKC_BASE + ACLKUART1_OFFS)
-#define ACLKUART2	(CKC_BASE + ACLKUART2_OFFS)
-#define ACLKUART3	(CKC_BASE + ACLKUART3_OFFS)
-#define ACLKUART4	(CKC_BASE + ACLKUART4_OFFS)
-#define ACLKI2C		(CKC_BASE + ACLKI2C_OFFS)
-#define ACLKADC		(CKC_BASE + ACLKADC_OFFS)
-#define ACLKUSBH	(CKC_BASE + ACLKUSBH_OFFS)
-#define ACLKLCD		(CKC_BASE + ACLKLCD_OFFS)
-#define ACLKSDH0	(CKC_BASE + ACLKSDH0_OFFS)
-#define ACLKSDH1	(CKC_BASE + ACLKSDH1_OFFS)
-#define ACLKSPI0	(CKC_BASE + ACLKSPI0_OFFS)
-#define ACLKSPI1	(CKC_BASE + ACLKSPI1_OFFS)
-#define ACLKSPDIF	(CKC_BASE + ACLKSPDIF_OFFS)
-#define ACLKC3DEC	(CKC_BASE + ACLKC3DEC_OFFS)
-#define ACLKCAN0	(CKC_BASE + ACLKCAN0_OFFS)
-#define ACLKCAN1	(CKC_BASE + ACLKCAN1_OFFS)
-#define ACLKGSB0	(CKC_BASE + ACLKGSB0_OFFS)
-#define ACLKGSB1	(CKC_BASE + ACLKGSB1_OFFS)
-#define ACLKGSB2	(CKC_BASE + ACLKGSB2_OFFS)
-#define ACLKGSB3	(CKC_BASE + ACLKGSB3_OFFS)
-#define ACLKTCT		(CKC_BASE + ACLKTCT_OFFS)
-#define ACLKTCX		(CKC_BASE + ACLKTCX_OFFS)
-#define ACLKTCZ		(CKC_BASE + ACLKTCZ_OFFS)
-
-#define ACLK_MAX_DIV	(0xfff + 1)
-
-/* Crystal frequencies */
-static unsigned long xi_rate, xti_rate;
-
-static void __iomem *pll_cfg_addr(int pll)
-{
-	switch (pll) {
-	case 0: return (CKC_BASE + PLL0CFG_OFFS);
-	case 1: return (CKC_BASE + PLL1CFG_OFFS);
-	case 2: return (CKC_BASE + PLL2CFG_OFFS);
-	default:
-		BUG();
-	}
-}
-
-static int pll_enable(int pll, int enable)
-{
-	u32 reg;
-	void __iomem *addr = pll_cfg_addr(pll);
-
-	reg = __raw_readl(addr);
-	if (enable)
-		reg &= ~PLLxCFG_PD;
-	else
-		reg |= PLLxCFG_PD;
-
-	__raw_writel(reg, addr);
-	return 0;
-}
-
-static int xi_enable(int enable)
-{
-	u32 reg;
-
-	reg = __raw_readl(CKC_BASE + CLKCTRL_OFFS);
-	if (enable)
-		reg |= CLKCTRL_XE;
-	else
-		reg &= ~CLKCTRL_XE;
-
-	__raw_writel(reg, CKC_BASE + CLKCTRL_OFFS);
-	return 0;
-}
-
-static int root_clk_enable(enum root_clks src)
-{
-	switch (src) {
-	case CLK_SRC_PLL0: return pll_enable(0, 1);
-	case CLK_SRC_PLL1: return pll_enable(1, 1);
-	case CLK_SRC_PLL2: return pll_enable(2, 1);
-	case CLK_SRC_XI: return xi_enable(1);
-	default:
-		BUG();
-	}
-	return 0;
-}
-
-static int root_clk_disable(enum root_clks src)
-{
-	switch (src) {
-	case CLK_SRC_PLL0: return pll_enable(0, 0);
-	case CLK_SRC_PLL1: return pll_enable(1, 0);
-	case CLK_SRC_PLL2: return pll_enable(2, 0);
-	case CLK_SRC_XI: return xi_enable(0);
-	default:
-		BUG();
-	}
-	return 0;
-}
-
-static int enable_clk(struct clk *clk)
-{
-	u32 reg;
-
-	if (clk->root_id != CLK_SRC_NOROOT)
-		return root_clk_enable(clk->root_id);
-
-	if (clk->aclkreg) {
-		reg = __raw_readl(clk->aclkreg);
-		reg |= ACLK_EN;
-		__raw_writel(reg, clk->aclkreg);
-	}
-	if (clk->bclkctr) {
-		reg = __raw_readl(clk->bclkctr);
-		reg |= 1 << clk->bclk_shift;
-		__raw_writel(reg, clk->bclkctr);
-	}
-	return 0;
-}
-
-static void disable_clk(struct clk *clk)
-{
-	u32 reg;
-
-	if (clk->root_id != CLK_SRC_NOROOT) {
-		root_clk_disable(clk->root_id);
-		return;
-	}
-
-	if (clk->bclkctr) {
-		reg = __raw_readl(clk->bclkctr);
-		reg &= ~(1 << clk->bclk_shift);
-		__raw_writel(reg, clk->bclkctr);
-	}
-	if (clk->aclkreg) {
-		reg = __raw_readl(clk->aclkreg);
-		reg &= ~ACLK_EN;
-		__raw_writel(reg, clk->aclkreg);
-	}
-}
-
-static unsigned long get_rate_pll(int pll)
-{
-	u32 reg;
-	unsigned long s, m, p;
-	void __iomem *addr = pll_cfg_addr(pll);
-
-	reg = __raw_readl(addr);
-	s = (reg >> 16) & 0x07;
-	m = (reg >> 8) & 0xff;
-	p = reg & 0x3f;
-
-	return (m * xi_rate) / (p * (1 << s));
-}
-
-static unsigned long get_rate_pll_div(int pll)
-{
-	u32 reg;
-	unsigned long div = 0;
-	void __iomem *addr;
-
-	switch (pll) {
-	case 0:
-		addr = CKC_BASE + CLKDIVC0_OFFS;
-		reg = __raw_readl(addr);
-		if (reg & CLKDIVC0_P0E)
-			div = (reg >> 24) & 0x3f;
-		break;
-	case 1:
-		addr = CKC_BASE + CLKDIVC0_OFFS;
-		reg = __raw_readl(addr);
-		if (reg & CLKDIVC0_P1E)
-			div = (reg >> 16) & 0x3f;
-		break;
-	case 2:
-		addr = CKC_BASE + CLKDIVC1_OFFS;
-		reg = __raw_readl(addr);
-		if (reg & CLKDIVC1_P2E)
-			div = reg & 0x3f;
-		break;
-	}
-	return get_rate_pll(pll) / (div + 1);
-}
-
-static unsigned long get_rate_xi_div(void)
-{
-	unsigned long div = 0;
-	u32 reg = __raw_readl(CKC_BASE + CLKDIVC0_OFFS);
-
-	if (reg & CLKDIVC0_XE)
-		div = (reg >> 8) & 0x3f;
-
-	return xi_rate / (div + 1);
-}
-
-static unsigned long get_rate_xti_div(void)
-{
-	unsigned long div = 0;
-	u32 reg = __raw_readl(CKC_BASE + CLKDIVC0_OFFS);
-
-	if (reg & CLKDIVC0_XTE)
-		div = reg & 0x3f;
-
-	return xti_rate / (div + 1);
-}
-
-static unsigned long root_clk_get_rate(enum root_clks src)
-{
-	switch (src) {
-	case CLK_SRC_PLL0: return get_rate_pll(0);
-	case CLK_SRC_PLL1: return get_rate_pll(1);
-	case CLK_SRC_PLL2: return get_rate_pll(2);
-	case CLK_SRC_PLL0DIV: return get_rate_pll_div(0);
-	case CLK_SRC_PLL1DIV: return get_rate_pll_div(1);
-	case CLK_SRC_PLL2DIV: return get_rate_pll_div(2);
-	case CLK_SRC_XI: return xi_rate;
-	case CLK_SRC_XTI: return xti_rate;
-	case CLK_SRC_XIDIV: return get_rate_xi_div();
-	case CLK_SRC_XTIDIV: return get_rate_xti_div();
-	default: return 0;
-	}
-}
-
-static unsigned long aclk_get_rate(struct clk *clk)
-{
-	u32 reg;
-	unsigned long div;
-	unsigned int src;
-
-	reg = __raw_readl(clk->aclkreg);
-	div = reg & 0x0fff;
-	src = (reg >> ACLK_SEL_SHIFT) & CLK_SRC_MASK;
-	return root_clk_get_rate(src) / (div + 1);
-}
-
-static unsigned long aclk_best_div(struct clk *clk, unsigned long rate)
-{
-	unsigned long div, src, freq, r1, r2;
-
-	if (!rate)
-		return ACLK_MAX_DIV;
-
-	src = __raw_readl(clk->aclkreg) >> ACLK_SEL_SHIFT;
-	src &= CLK_SRC_MASK;
-	freq = root_clk_get_rate(src);
-	div = freq / rate;
-	if (!div)
-		return 1;
-	if (div >= ACLK_MAX_DIV)
-		return ACLK_MAX_DIV;
-	r1 = freq / div;
-	r2 = freq / (div + 1);
-	if ((rate - r2) < (r1 - rate))
-		return div + 1;
-
-	return div;
-}
-
-static unsigned long aclk_round_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned int src;
-
-	src = __raw_readl(clk->aclkreg) >> ACLK_SEL_SHIFT;
-	src &= CLK_SRC_MASK;
-
-	return root_clk_get_rate(src) / aclk_best_div(clk, rate);
-}
-
-static int aclk_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 reg;
-
-	reg = __raw_readl(clk->aclkreg) & ~ACLK_DIV_MASK;
-	reg |= aclk_best_div(clk, rate) - 1;
-	__raw_writel(reg, clk->aclkreg);
-	return 0;
-}
-
-static unsigned long get_rate_sys(struct clk *clk)
-{
-	unsigned int src;
-
-	src = __raw_readl(CKC_BASE + CLKCTRL_OFFS) & CLK_SRC_MASK;
-	return root_clk_get_rate(src);
-}
-
-static unsigned long get_rate_bus(struct clk *clk)
-{
-	unsigned int reg, sdiv, bdiv, rate;
-
-	reg = __raw_readl(CKC_BASE + CLKCTRL_OFFS);
-	rate = get_rate_sys(clk);
-	sdiv = (reg >> 20) & 3;
-	if (sdiv)
-		rate /= sdiv + 1;
-	bdiv = (reg >> 4) & 0xff;
-	if (bdiv)
-		rate /= bdiv + 1;
-	return rate;
-}
-
-static unsigned long get_rate_cpu(struct clk *clk)
-{
-	unsigned int reg, div, fsys, fbus;
-
-	fbus = get_rate_bus(clk);
-	reg = __raw_readl(CKC_BASE + CLKCTRL_OFFS);
-	if (reg & (1 << 29))
-		return fbus;
-	fsys = get_rate_sys(clk);
-	div = (reg >> 16) & 0x0f;
-	return fbus + ((fsys - fbus) * (div + 1)) / 16;
-}
-
-static unsigned long get_rate_root(struct clk *clk)
-{
-	return root_clk_get_rate(clk->root_id);
-}
-
-static int aclk_set_parent(struct clk *clock, struct clk *parent)
-{
-	u32 reg;
-
-	if (clock->parent == parent)
-		return 0;
-
-	clock->parent = parent;
-
-	if (!parent)
-		return 0;
-
-	if (parent->root_id == CLK_SRC_NOROOT)
-		return 0;
-	reg = __raw_readl(clock->aclkreg);
-	reg &= ~ACLK_SEL_MASK;
-	reg |= (parent->root_id << ACLK_SEL_SHIFT) & ACLK_SEL_MASK;
-	__raw_writel(reg, clock->aclkreg);
-
-	return 0;
-}
-
-#define DEFINE_ROOT_CLOCK(name, ri, p)	\
-	static struct clk name = {		\
-		.root_id = ri,			\
-		.get_rate = get_rate_root,			\
-		.enable = enable_clk,		\
-		.disable = disable_clk,		\
-		.parent = p,			\
-	};
-
-#define DEFINE_SPECIAL_CLOCK(name, gr, p)	\
-	static struct clk name = {		\
-		.root_id = CLK_SRC_NOROOT,	\
-		.get_rate = gr,			\
-		.parent = p,			\
-	};
-
-#define DEFINE_ACLOCK(name, bc, bs, ar)		\
-	static struct clk name = {		\
-		.root_id = CLK_SRC_NOROOT,	\
-		.bclkctr = bc,			\
-		.bclk_shift = bs,		\
-		.aclkreg = ar,			\
-		.get_rate = aclk_get_rate,	\
-		.set_rate = aclk_set_rate,	\
-		.round_rate = aclk_round_rate,	\
-		.enable = enable_clk,		\
-		.disable = disable_clk,		\
-		.set_parent = aclk_set_parent,	\
-	};
-
-#define DEFINE_BCLOCK(name, bc, bs, gr, p)	\
-	static struct clk name = {		\
-		.root_id = CLK_SRC_NOROOT,	\
-		.bclkctr = bc,			\
-		.bclk_shift = bs,		\
-		.get_rate = gr,			\
-		.enable = enable_clk,		\
-		.disable = disable_clk,		\
-		.parent = p,			\
-	};
-
-DEFINE_ROOT_CLOCK(xi, CLK_SRC_XI, NULL)
-DEFINE_ROOT_CLOCK(xti, CLK_SRC_XTI, NULL)
-DEFINE_ROOT_CLOCK(xidiv, CLK_SRC_XIDIV, &xi)
-DEFINE_ROOT_CLOCK(xtidiv, CLK_SRC_XTIDIV, &xti)
-DEFINE_ROOT_CLOCK(pll0, CLK_SRC_PLL0, &xi)
-DEFINE_ROOT_CLOCK(pll1, CLK_SRC_PLL1, &xi)
-DEFINE_ROOT_CLOCK(pll2, CLK_SRC_PLL2, &xi)
-DEFINE_ROOT_CLOCK(pll0div, CLK_SRC_PLL0DIV, &pll0)
-DEFINE_ROOT_CLOCK(pll1div, CLK_SRC_PLL1DIV, &pll1)
-DEFINE_ROOT_CLOCK(pll2div, CLK_SRC_PLL2DIV, &pll2)
-
-/* The following 3 clocks are special and are initialized explicitly later */
-DEFINE_SPECIAL_CLOCK(sys, get_rate_sys, NULL)
-DEFINE_SPECIAL_CLOCK(bus, get_rate_bus, &sys)
-DEFINE_SPECIAL_CLOCK(cpu, get_rate_cpu, &sys)
-
-DEFINE_ACLOCK(tct, NULL, 0, ACLKTCT)
-DEFINE_ACLOCK(tcx, NULL, 0, ACLKTCX)
-DEFINE_ACLOCK(tcz, NULL, 0, ACLKTCZ)
-DEFINE_ACLOCK(ref, NULL, 0, ACLKREF)
-DEFINE_ACLOCK(uart0, BCLKCTR0, 5, ACLKUART0)
-DEFINE_ACLOCK(uart1, BCLKCTR0, 23, ACLKUART1)
-DEFINE_ACLOCK(uart2, BCLKCTR0, 6, ACLKUART2)
-DEFINE_ACLOCK(uart3, BCLKCTR0, 8, ACLKUART3)
-DEFINE_ACLOCK(uart4, BCLKCTR1, 6, ACLKUART4)
-DEFINE_ACLOCK(i2c, BCLKCTR0, 7, ACLKI2C)
-DEFINE_ACLOCK(adc, BCLKCTR0, 10, ACLKADC)
-DEFINE_ACLOCK(usbh0, BCLKCTR0, 11, ACLKUSBH)
-DEFINE_ACLOCK(lcd, BCLKCTR0, 13, ACLKLCD)
-DEFINE_ACLOCK(sd0, BCLKCTR0, 17, ACLKSDH0)
-DEFINE_ACLOCK(sd1, BCLKCTR1, 5, ACLKSDH1)
-DEFINE_ACLOCK(spi0, BCLKCTR0, 24, ACLKSPI0)
-DEFINE_ACLOCK(spi1, BCLKCTR0, 30, ACLKSPI1)
-DEFINE_ACLOCK(spdif, BCLKCTR1, 2, ACLKSPDIF)
-DEFINE_ACLOCK(c3dec, BCLKCTR1, 9, ACLKC3DEC)
-DEFINE_ACLOCK(can0, BCLKCTR1, 10, ACLKCAN0)
-DEFINE_ACLOCK(can1, BCLKCTR1, 11, ACLKCAN1)
-DEFINE_ACLOCK(gsb0, BCLKCTR1, 13, ACLKGSB0)
-DEFINE_ACLOCK(gsb1, BCLKCTR1, 14, ACLKGSB1)
-DEFINE_ACLOCK(gsb2, BCLKCTR1, 15, ACLKGSB2)
-DEFINE_ACLOCK(gsb3, BCLKCTR1, 16, ACLKGSB3)
-DEFINE_ACLOCK(usbh1, BCLKCTR1, 20, ACLKUSBH)
-
-DEFINE_BCLOCK(dai0, BCLKCTR0, 0, NULL, NULL)
-DEFINE_BCLOCK(pic, BCLKCTR0, 1, NULL, NULL)
-DEFINE_BCLOCK(tc, BCLKCTR0, 2, NULL, NULL)
-DEFINE_BCLOCK(gpio, BCLKCTR0, 3, NULL, NULL)
-DEFINE_BCLOCK(usbd, BCLKCTR0, 4, NULL, NULL)
-DEFINE_BCLOCK(ecc, BCLKCTR0, 9, NULL, NULL)
-DEFINE_BCLOCK(gdma0, BCLKCTR0, 12, NULL, NULL)
-DEFINE_BCLOCK(rtc, BCLKCTR0, 15, NULL, NULL)
-DEFINE_BCLOCK(nfc, BCLKCTR0, 16, NULL, NULL)
-DEFINE_BCLOCK(g2d, BCLKCTR0, 18, NULL, NULL)
-DEFINE_BCLOCK(gdma1, BCLKCTR0, 22, NULL, NULL)
-DEFINE_BCLOCK(mscl, BCLKCTR0, 25, NULL, NULL)
-DEFINE_BCLOCK(bdma, BCLKCTR1, 0, NULL, NULL)
-DEFINE_BCLOCK(adma0, BCLKCTR1, 1, NULL, NULL)
-DEFINE_BCLOCK(scfg, BCLKCTR1, 3, NULL, NULL)
-DEFINE_BCLOCK(cid, BCLKCTR1, 4, NULL, NULL)
-DEFINE_BCLOCK(dai1, BCLKCTR1, 7, NULL, NULL)
-DEFINE_BCLOCK(adma1, BCLKCTR1, 8, NULL, NULL)
-DEFINE_BCLOCK(gps, BCLKCTR1, 12, NULL, NULL)
-DEFINE_BCLOCK(gdma2, BCLKCTR1, 17, NULL, NULL)
-DEFINE_BCLOCK(gdma3, BCLKCTR1, 18, NULL, NULL)
-DEFINE_BCLOCK(ddrc, BCLKCTR1, 19, NULL, NULL)
-
-#define _REGISTER_CLOCK(d, n, c) \
-	{ \
-		.dev_id = d, \
-		.con_id = n, \
-		.clk = &c, \
-	},
-
-static struct clk_lookup lookups[] = {
-	_REGISTER_CLOCK(NULL, "bus", bus)
-	_REGISTER_CLOCK(NULL, "cpu", cpu)
-	_REGISTER_CLOCK(NULL, "tct", tct)
-	_REGISTER_CLOCK(NULL, "tcx", tcx)
-	_REGISTER_CLOCK(NULL, "tcz", tcz)
-	_REGISTER_CLOCK(NULL, "ref", ref)
-	_REGISTER_CLOCK(NULL, "dai0", dai0)
-	_REGISTER_CLOCK(NULL, "pic", pic)
-	_REGISTER_CLOCK(NULL, "tc", tc)
-	_REGISTER_CLOCK(NULL, "gpio", gpio)
-	_REGISTER_CLOCK(NULL, "usbd", usbd)
-	_REGISTER_CLOCK("tcc-uart.0", NULL, uart0)
-	_REGISTER_CLOCK("tcc-uart.2", NULL, uart2)
-	_REGISTER_CLOCK("tcc-i2c", NULL, i2c)
-	_REGISTER_CLOCK("tcc-uart.3", NULL, uart3)
-	_REGISTER_CLOCK(NULL, "ecc", ecc)
-	_REGISTER_CLOCK(NULL, "adc", adc)
-	_REGISTER_CLOCK("tcc-usbh.0", "usb", usbh0)
-	_REGISTER_CLOCK(NULL, "gdma0", gdma0)
-	_REGISTER_CLOCK(NULL, "lcd", lcd)
-	_REGISTER_CLOCK(NULL, "rtc", rtc)
-	_REGISTER_CLOCK(NULL, "nfc", nfc)
-	_REGISTER_CLOCK("tcc-mmc.0", NULL, sd0)
-	_REGISTER_CLOCK(NULL, "g2d", g2d)
-	_REGISTER_CLOCK(NULL, "gdma1", gdma1)
-	_REGISTER_CLOCK("tcc-uart.1", NULL, uart1)
-	_REGISTER_CLOCK("tcc-spi.0", NULL, spi0)
-	_REGISTER_CLOCK(NULL, "mscl", mscl)
-	_REGISTER_CLOCK("tcc-spi.1", NULL, spi1)
-	_REGISTER_CLOCK(NULL, "bdma", bdma)
-	_REGISTER_CLOCK(NULL, "adma0", adma0)
-	_REGISTER_CLOCK(NULL, "spdif", spdif)
-	_REGISTER_CLOCK(NULL, "scfg", scfg)
-	_REGISTER_CLOCK(NULL, "cid", cid)
-	_REGISTER_CLOCK("tcc-mmc.1", NULL, sd1)
-	_REGISTER_CLOCK("tcc-uart.4", NULL, uart4)
-	_REGISTER_CLOCK(NULL, "dai1", dai1)
-	_REGISTER_CLOCK(NULL, "adma1", adma1)
-	_REGISTER_CLOCK(NULL, "c3dec", c3dec)
-	_REGISTER_CLOCK("tcc-can.0", NULL, can0)
-	_REGISTER_CLOCK("tcc-can.1", NULL, can1)
-	_REGISTER_CLOCK(NULL, "gps", gps)
-	_REGISTER_CLOCK("tcc-gsb.0", NULL, gsb0)
-	_REGISTER_CLOCK("tcc-gsb.1", NULL, gsb1)
-	_REGISTER_CLOCK("tcc-gsb.2", NULL, gsb2)
-	_REGISTER_CLOCK("tcc-gsb.3", NULL, gsb3)
-	_REGISTER_CLOCK(NULL, "gdma2", gdma2)
-	_REGISTER_CLOCK(NULL, "gdma3", gdma3)
-	_REGISTER_CLOCK(NULL, "ddrc", ddrc)
-	_REGISTER_CLOCK("tcc-usbh.1", "usb", usbh1)
-};
-
-static struct clk *root_clk_by_index(enum root_clks src)
-{
-	switch (src) {
-	case CLK_SRC_PLL0: return &pll0;
-	case CLK_SRC_PLL1: return &pll1;
-	case CLK_SRC_PLL2: return &pll2;
-	case CLK_SRC_PLL0DIV: return &pll0div;
-	case CLK_SRC_PLL1DIV: return &pll1div;
-	case CLK_SRC_PLL2DIV: return &pll2div;
-	case CLK_SRC_XI: return &xi;
-	case CLK_SRC_XTI: return &xti;
-	case CLK_SRC_XIDIV: return &xidiv;
-	case CLK_SRC_XTIDIV: return &xtidiv;
-	default: return NULL;
-	}
-}
-
-static void find_aclk_parent(struct clk *clk)
-{
-	unsigned int src;
-	struct clk *clock;
-
-	if (!clk->aclkreg)
-		return;
-
-	src = __raw_readl(clk->aclkreg) >> ACLK_SEL_SHIFT;
-	src &= CLK_SRC_MASK;
-
-	clock = root_clk_by_index(src);
-	if (!clock)
-		return;
-
-	clk->parent = clock;
-	clk->set_parent = aclk_set_parent;
-}
-
-void __init tcc_clocks_init(unsigned long xi_freq, unsigned long xti_freq)
-{
-	int i;
-
-	xi_rate = xi_freq;
-	xti_rate = xti_freq;
-
-	/* fixup parents and add the clock */
-	for (i = 0; i < ARRAY_SIZE(lookups); i++) {
-		find_aclk_parent(lookups[i].clk);
-		clkdev_add(&lookups[i]);
-	}
-	tcc8k_timer_init(&tcz, (void __iomem *)TIMER_BASE, INT_TC32);
-}
diff --git a/arch/arm/mach-tcc8k/common.h b/arch/arm/mach-tcc8k/common.h
deleted file mode 100644
index 705690a..0000000
--- a/arch/arm/mach-tcc8k/common.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef MACH_TCC8K_COMMON_H
-#define MACH_TCC8K_COMMON_H
-
-#include <linux/platform_device.h>
-
-extern struct platform_device tcc_nand_device;
-
-struct clk;
-
-extern void tcc_clocks_init(unsigned long xi_freq, unsigned long xti_freq);
-extern void tcc8k_timer_init(struct clk *clock, void __iomem *base, int irq);
-extern void tcc8k_init_irq(void);
-extern void tcc8k_map_common_io(void);
-
-#endif
diff --git a/arch/arm/mach-tcc8k/devices.c b/arch/arm/mach-tcc8k/devices.c
deleted file mode 100644
index 6722ad7..0000000
--- a/arch/arm/mach-tcc8k/devices.c
+++ /dev/null
@@ -1,239 +0,0 @@
-/*
- * linux/arch/arm/mach-tcc8k/devices.c
- *
- * Copyright (C) Telechips, Inc.
- * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of GPL v2.
- *
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/tcc8k-regs.h>
-#include <mach/irqs.h>
-
-#include "common.h"
-
-static u64 tcc8k_dmamask = DMA_BIT_MASK(32);
-
-#ifdef CONFIG_MTD_NAND_TCC
-/* NAND controller */
-static struct resource tcc_nand_resources[] = {
-	{
-		.start	= (resource_size_t)NFC_BASE,
-		.end	= (resource_size_t)NFC_BASE + 0x7f,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= INT_NFC,
-		.end	= INT_NFC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device tcc_nand_device = {
-	.name = "tcc_nand",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(tcc_nand_resources),
-	.resource = tcc_nand_resources,
-};
-#endif
-
-#ifdef CONFIG_MMC_TCC8K
-/* MMC controller */
-static struct resource tcc8k_mmc0_resource[] = {
-	{
-		.start = INT_SD0,
-		.end   = INT_SD0,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource tcc8k_mmc1_resource[] = {
-	{
-		.start = INT_SD1,
-		.end   = INT_SD1,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device tcc8k_mmc0_device = {
-	.name		= "tcc-mmc",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(tcc8k_mmc0_resource),
-	.resource	= tcc8k_mmc0_resource,
-	.dev		= {
-		.dma_mask		= &tcc8k_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-
-struct platform_device tcc8k_mmc1_device = {
-	.name		= "tcc-mmc",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(tcc8k_mmc1_resource),
-	.resource	= tcc8k_mmc1_resource,
-	.dev		= {
-		.dma_mask		= &tcc8k_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-
-static inline void tcc8k_init_mmc(void)
-{
-	u32 reg = __raw_readl(GPIOPS_BASE + GPIOPS_FS1_OFFS);
-
-	reg |= GPIOPS_FS1_SDH0_BITS | GPIOPS_FS1_SDH1_BITS;
-	__raw_writel(reg, GPIOPS_BASE + GPIOPS_FS1_OFFS);
-
-	platform_device_register(&tcc8k_mmc0_device);
-	platform_device_register(&tcc8k_mmc1_device);
-}
-#else
-static inline void tcc8k_init_mmc(void) { }
-#endif
-
-#ifdef CONFIG_USB_OHCI_HCD
-static int tcc8k_ohci_init(struct device *dev)
-{
-	u32 reg;
-
-	/* Use GPIO PK19 as VBUS control output */
-	reg = __raw_readl(GPIOPK_BASE + GPIOPK_FS0_OFFS);
-	reg &= ~(1 << 19);
-	__raw_writel(reg, GPIOPK_BASE + GPIOPK_FS0_OFFS);
-	reg = __raw_readl(GPIOPK_BASE + GPIOPK_FS1_OFFS);
-	reg &= ~(1 << 19);
-	__raw_writel(reg, GPIOPK_BASE + GPIOPK_FS1_OFFS);
-
-	reg = __raw_readl(GPIOPK_BASE + GPIOPK_DOE_OFFS);
-	reg |= (1 << 19);
-	__raw_writel(reg, GPIOPK_BASE + GPIOPK_DOE_OFFS);
-	/* Turn on VBUS */
-	reg = __raw_readl(GPIOPK_BASE + GPIOPK_DAT_OFFS);
-	reg |= (1 << 19);
-	__raw_writel(reg, GPIOPK_BASE + GPIOPK_DAT_OFFS);
-
-	return 0;
-}
-
-static struct resource tcc8k_ohci0_resources[] = {
-	[0] = {
-		.start = (resource_size_t)USBH0_BASE,
-		.end   = (resource_size_t)USBH0_BASE + 0x5c,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = INT_USBH0,
-		.end   = INT_USBH0,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static struct resource tcc8k_ohci1_resources[] = {
-	[0] = {
-		.start = (resource_size_t)USBH1_BASE,
-		.end   = (resource_size_t)USBH1_BASE + 0x5c,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = INT_USBH1,
-		.end   = INT_USBH1,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static struct tccohci_platform_data tcc8k_ohci0_platform_data = {
-	.controller	= 0,
-	.port_mode	= PMM_PERPORT_MODE,
-	.init		= tcc8k_ohci_init,
-};
-
-static struct tccohci_platform_data tcc8k_ohci1_platform_data = {
-	.controller	= 1,
-	.port_mode	= PMM_PERPORT_MODE,
-	.init		= tcc8k_ohci_init,
-};
-
-static struct platform_device ohci0_device = {
-	.name = "tcc-ohci",
-	.id = 0,
-	.dev = {
-		.dma_mask = &tcc8k_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &tcc8k_ohci0_platform_data,
-	},
-	.num_resources  = ARRAY_SIZE(tcc8k_ohci0_resources),
-	.resource       = tcc8k_ohci0_resources,
-};
-
-static struct platform_device ohci1_device = {
-	.name = "tcc-ohci",
-	.id = 1,
-	.dev = {
-		.dma_mask = &tcc8k_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &tcc8k_ohci1_platform_data,
-	},
-	.num_resources  = ARRAY_SIZE(tcc8k_ohci1_resources),
-	.resource       = tcc8k_ohci1_resources,
-};
-
-static void __init tcc8k_init_usbhost(void)
-{
-	platform_device_register(&ohci0_device);
-	platform_device_register(&ohci1_device);
-}
-#else
-static void __init tcc8k_init_usbhost(void) { }
-#endif
-
-/* USB device controller*/
-#ifdef CONFIG_USB_GADGET_TCC8K
-static struct resource udc_resources[] = {
-	[0] = {
-		.start = INT_USBD,
-		.end   = INT_USBD,
-		.flags = IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start = INT_UDMA,
-		.end   = INT_UDMA,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device tcc8k_udc_device = {
-	.name = "tcc-udc",
-	.id = 0,
-	.resource = udc_resources,
-	.num_resources = ARRAY_SIZE(udc_resources),
-	.dev = {
-		 .dma_mask = &tcc8k_dmamask,
-		 .coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
-
-static void __init tcc8k_init_usb_gadget(void)
-{
-	platform_device_register(&tcc8k_udc_device);
-}
-#else
-static void __init tcc8k_init_usb_gadget(void) { }
-#endif	/* CONFIG_USB_GADGET_TCC83X */
-
-static int __init tcc8k_init_devices(void)
-{
-	tcc8k_init_mmc();
-	tcc8k_init_usbhost();
-	tcc8k_init_usb_gadget();
-	return 0;
-}
-
-arch_initcall(tcc8k_init_devices);
diff --git a/arch/arm/mach-tcc8k/io.c b/arch/arm/mach-tcc8k/io.c
deleted file mode 100644
index 9b39d7f..0000000
--- a/arch/arm/mach-tcc8k/io.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * linux/arch/arm/mach-tcc8k/io.c
- *
- * (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * derived from TCC83xx io.c
- * Copyright (C) Telechips, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/tcc8k-regs.h>
-
-/*
- * The machine specific code may provide the extra mapping besides the
- * default mapping provided here.
- */
-static struct map_desc tcc8k_io_desc[] __initdata = {
-	{
-		.virtual	= (unsigned long)CS1_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CS1_BASE),
-		.length		= CS1_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)AHB_PERI_BASE_VIRT,
-		.pfn		= __phys_to_pfn(AHB_PERI_BASE),
-		.length		= AHB_PERI_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)APB0_PERI_BASE_VIRT,
-		.pfn		= __phys_to_pfn(APB0_PERI_BASE),
-		.length		= APB0_PERI_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)APB1_PERI_BASE_VIRT,
-		.pfn		= __phys_to_pfn(APB1_PERI_BASE),
-		.length		= APB1_PERI_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)EXT_MEM_CTRL_BASE_VIRT,
-		.pfn		= __phys_to_pfn(EXT_MEM_CTRL_BASE),
-		.length		= EXT_MEM_CTRL_SIZE,
-		.type		= MT_DEVICE,
-	},
-};
-
-/*
- * Maps common IO regions for tcc8k.
- *
- */
-void __init tcc8k_map_common_io(void)
-{
-	iotable_init(tcc8k_io_desc, ARRAY_SIZE(tcc8k_io_desc));
-}
diff --git a/arch/arm/mach-tcc8k/irq.c b/arch/arm/mach-tcc8k/irq.c
deleted file mode 100644
index 209fa5c..0000000
--- a/arch/arm/mach-tcc8k/irq.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * Copyright (C) Telechips, Inc.
- * Copyright (C) 2009-2010 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GNU GPL version 2.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-
-#include <mach/tcc8k-regs.h>
-#include <mach/irqs.h>
-
-#include "common.h"
-
-/* Disable IRQ */
-static void tcc8000_mask_ack_irq0(struct irq_data *d)
-{
-	PIC0_IEN &= ~(1 << d->irq);
-	PIC0_CREQ |=  (1 << d->irq);
-}
-
-static void tcc8000_mask_ack_irq1(struct irq_data *d)
-{
-	PIC1_IEN &= ~(1 << (d->irq - 32));
-	PIC1_CREQ |= (1 << (d->irq - 32));
-}
-
-static void tcc8000_mask_irq0(struct irq_data *d)
-{
-	PIC0_IEN &= ~(1 << d->irq);
-}
-
-static void tcc8000_mask_irq1(struct irq_data *d)
-{
-	PIC1_IEN &= ~(1 << (d->irq - 32));
-}
-
-static void tcc8000_ack_irq0(struct irq_data *d)
-{
-	PIC0_CREQ |=  (1 << d->irq);
-}
-
-static void tcc8000_ack_irq1(struct irq_data *d)
-{
-	PIC1_CREQ |= (1 << (d->irq - 32));
-}
-
-/* Enable IRQ */
-static void tcc8000_unmask_irq0(struct irq_data *d)
-{
-	PIC0_IEN |= (1 << d->irq);
-	PIC0_INTOEN |= (1 << d->irq);
-}
-
-static void tcc8000_unmask_irq1(struct irq_data *d)
-{
-	PIC1_IEN |= (1 << (d->irq - 32));
-	PIC1_INTOEN |= (1 << (d->irq - 32));
-}
-
-static struct irq_chip tcc8000_irq_chip0 = {
-	.name		= "tcc_irq0",
-	.irq_mask	= tcc8000_mask_irq0,
-	.irq_ack	= tcc8000_ack_irq0,
-	.irq_mask_ack	= tcc8000_mask_ack_irq0,
-	.irq_unmask	= tcc8000_unmask_irq0,
-};
-
-static struct irq_chip tcc8000_irq_chip1 = {
-	.name		= "tcc_irq1",
-	.irq_mask	= tcc8000_mask_irq1,
-	.irq_ack	= tcc8000_ack_irq1,
-	.irq_mask_ack	= tcc8000_mask_ack_irq1,
-	.irq_unmask	= tcc8000_unmask_irq1,
-};
-
-void __init tcc8k_init_irq(void)
-{
-	int irqno;
-
-	/* Mask and clear all interrupts */
-	PIC0_IEN = 0x00000000;
-	PIC0_CREQ = 0xffffffff;
-	PIC1_IEN = 0x00000000;
-	PIC1_CREQ = 0xffffffff;
-
-	PIC0_MEN0 = 0x00000003;
-	PIC1_MEN1 = 0x00000003;
-	PIC1_MEN = 0x00000003;
-
-	/* let all IRQs be level triggered */
-	PIC0_TMODE = 0xffffffff;
-	PIC1_TMODE = 0xffffffff;
-	/* all IRQs are IRQs (not FIQs) */
-	PIC0_IRQSEL = 0xffffffff;
-	PIC1_IRQSEL = 0xffffffff;
-
-	for (irqno = 0; irqno < NR_IRQS; irqno++) {
-		if (irqno < 32)
-			irq_set_chip(irqno, &tcc8000_irq_chip0);
-		else
-			irq_set_chip(irqno, &tcc8000_irq_chip1);
-		irq_set_handler(irqno, handle_level_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-}
diff --git a/arch/arm/mach-tcc8k/time.c b/arch/arm/mach-tcc8k/time.c
deleted file mode 100644
index a96babe..0000000
--- a/arch/arm/mach-tcc8k/time.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * TCC8000 system timer setup
- *
- * (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GPL version 2.
- *
- */
-
-#include <linux/clk.h>
-#include <linux/clockchips.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/spinlock.h>
-
-#include <asm/mach/time.h>
-
-#include <mach/tcc8k-regs.h>
-#include <mach/irqs.h>
-
-#include "common.h"
-
-static void __iomem *timer_base;
-
-static int tcc_set_next_event(unsigned long evt,
-			      struct clock_event_device *unused)
-{
-	unsigned long reg = __raw_readl(timer_base + TC32MCNT_OFFS);
-
-	__raw_writel(reg + evt, timer_base + TC32CMP0_OFFS);
-	return 0;
-}
-
-static void tcc_set_mode(enum clock_event_mode mode,
-				struct clock_event_device *evt)
-{
-	unsigned long tc32irq;
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_ONESHOT:
-		tc32irq = __raw_readl(timer_base + TC32IRQ_OFFS);
-		tc32irq |= TC32IRQ_IRQEN0;
-		__raw_writel(tc32irq, timer_base + TC32IRQ_OFFS);
-		break;
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_UNUSED:
-		tc32irq = __raw_readl(timer_base + TC32IRQ_OFFS);
-		tc32irq &= ~TC32IRQ_IRQEN0;
-		__raw_writel(tc32irq, timer_base + TC32IRQ_OFFS);
-		break;
-	case CLOCK_EVT_MODE_PERIODIC:
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
-}
-
-static irqreturn_t tcc8k_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = dev_id;
-
-	/* Acknowledge TC32 interrupt by reading TC32IRQ */
-	__raw_readl(timer_base + TC32IRQ_OFFS);
-
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-static struct clock_event_device clockevent_tcc = {
-	.name		= "tcc_timer1",
-	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
-	.set_mode	= tcc_set_mode,
-	.set_next_event	= tcc_set_next_event,
-	.rating		= 200,
-};
-
-static struct irqaction tcc8k_timer_irq = {
-	.name		= "TC32_timer",
-	.flags		= IRQF_DISABLED | IRQF_TIMER,
-	.handler	= tcc8k_timer_interrupt,
-	.dev_id		= &clockevent_tcc,
-};
-
-static int __init tcc_clockevent_init(struct clk *clock)
-{
-	unsigned int c = clk_get_rate(clock);
-
-	clocksource_mmio_init(timer_base + TC32MCNT_OFFS, "tcc_tc32", c,
-		200, 32, clocksource_mmio_readl_up);
-
-	clockevent_tcc.mult = div_sc(c, NSEC_PER_SEC,
-					clockevent_tcc.shift);
-	clockevent_tcc.max_delta_ns =
-			clockevent_delta2ns(0xfffffffe, &clockevent_tcc);
-	clockevent_tcc.min_delta_ns =
-			clockevent_delta2ns(0xff, &clockevent_tcc);
-
-	clockevent_tcc.cpumask = cpumask_of(0);
-
-	clockevents_register_device(&clockevent_tcc);
-
-	return 0;
-}
-
-void __init tcc8k_timer_init(struct clk *clock, void __iomem *base, int irq)
-{
-	u32 reg;
-
-	timer_base = base;
-	tcc8k_timer_irq.irq = irq;
-
-	/* Enable clocks */
-	clk_enable(clock);
-
-	/* Initialize 32-bit timer */
-	reg = __raw_readl(timer_base + TC32EN_OFFS);
-	reg &= ~TC32EN_ENABLE; /* Disable timer */
-	__raw_writel(reg, timer_base + TC32EN_OFFS);
-	/* Free running timer, counting from 0 to 0xffffffff */
-	__raw_writel(0, timer_base + TC32EN_OFFS);
-	__raw_writel(0, timer_base + TC32LDV_OFFS);
-	reg = __raw_readl(timer_base + TC32IRQ_OFFS);
-	reg |= TC32IRQ_IRQEN0; /* irq at match with CMP0 */
-	__raw_writel(reg, timer_base + TC32IRQ_OFFS);
-
-	__raw_writel(TC32EN_ENABLE, timer_base + TC32EN_OFFS);
-
-	tcc_clockevent_init(clock);
-	setup_irq(irq, &tcc8k_timer_irq);
-}
diff --git a/arch/arm/mach-tegra/board-dt.c b/arch/arm/mach-tegra/board-dt.c
index 74743ad..e417a83 100644
--- a/arch/arm/mach-tegra/board-dt.c
+++ b/arch/arm/mach-tegra/board-dt.c
@@ -32,6 +32,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c-tegra.h>
 
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
@@ -130,7 +131,9 @@ DT_MACHINE_START(TEGRA_DT, "nVidia Tegra (Flattened Device Tree)")
 	.map_io		= tegra_map_common_io,
 	.init_early	= tegra_init_early,
 	.init_irq	= tegra_init_irq,
+	.handle_irq	= gic_handle_irq,
 	.timer		= &tegra_timer,
 	.init_machine	= tegra_dt_init,
+	.restart	= tegra_assert_system_reset,
 	.dt_compat	= tegra_dt_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c
index f0bdc5e..70ee674 100644
--- a/arch/arm/mach-tegra/board-harmony.c
+++ b/arch/arm/mach-tegra/board-harmony.c
@@ -31,6 +31,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
+#include <asm/hardware/gic.h>
 #include <asm/setup.h>
 
 #include <mach/tegra_wm8903_pdata.h>
@@ -187,6 +188,8 @@ MACHINE_START(HARMONY, "harmony")
 	.map_io         = tegra_map_common_io,
 	.init_early	= tegra_init_early,
 	.init_irq       = tegra_init_irq,
+	.handle_irq	= gic_handle_irq,
 	.timer          = &tegra_timer,
 	.init_machine   = tegra_harmony_init,
+	.restart	= tegra_assert_system_reset,
 MACHINE_END
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index 55c55ba..33d6205 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -29,6 +29,7 @@
 #include <linux/gpio.h>
 #include <linux/rfkill-gpio.h>
 
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
@@ -190,6 +191,8 @@ MACHINE_START(PAZ00, "Toshiba AC100 / Dynabook AZ")
 	.map_io         = tegra_map_common_io,
 	.init_early	= tegra_init_early,
 	.init_irq       = tegra_init_irq,
+	.handle_irq	= gic_handle_irq,
 	.timer          = &tegra_timer,
 	.init_machine   = tegra_paz00_init,
+	.restart	= tegra_assert_system_reset,
 MACHINE_END
diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c
index bf13ea3..c1599eb 100644
--- a/arch/arm/mach-tegra/board-seaboard.c
+++ b/arch/arm/mach-tegra/board-seaboard.c
@@ -34,6 +34,7 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 
 #include "board.h"
 #include "board-seaboard.h"
@@ -284,8 +285,10 @@ MACHINE_START(SEABOARD, "seaboard")
 	.map_io         = tegra_map_common_io,
 	.init_early     = tegra_init_early,
 	.init_irq       = tegra_init_irq,
+	.handle_irq	= gic_handle_irq,
 	.timer          = &tegra_timer,
 	.init_machine   = tegra_seaboard_init,
+	.restart	= tegra_assert_system_reset,
 MACHINE_END
 
 MACHINE_START(KAEN, "kaen")
@@ -293,8 +296,10 @@ MACHINE_START(KAEN, "kaen")
 	.map_io         = tegra_map_common_io,
 	.init_early     = tegra_init_early,
 	.init_irq       = tegra_init_irq,
+	.handle_irq	= gic_handle_irq,
 	.timer          = &tegra_timer,
 	.init_machine   = tegra_kaen_init,
+	.restart	= tegra_assert_system_reset,
 MACHINE_END
 
 MACHINE_START(WARIO, "wario")
@@ -302,6 +307,8 @@ MACHINE_START(WARIO, "wario")
 	.map_io         = tegra_map_common_io,
 	.init_early     = tegra_init_early,
 	.init_irq       = tegra_init_irq,
+	.handle_irq	= gic_handle_irq,
 	.timer          = &tegra_timer,
 	.init_machine   = tegra_wario_init,
+	.restart	= tegra_assert_system_reset,
 MACHINE_END
diff --git a/arch/arm/mach-tegra/board-trimslice.c b/arch/arm/mach-tegra/board-trimslice.c
index 1a6617b..c242314 100644
--- a/arch/arm/mach-tegra/board-trimslice.c
+++ b/arch/arm/mach-tegra/board-trimslice.c
@@ -26,6 +26,7 @@
 #include <linux/i2c.h>
 #include <linux/gpio.h>
 
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/setup.h>
@@ -176,6 +177,8 @@ MACHINE_START(TRIMSLICE, "trimslice")
 	.map_io         = tegra_map_common_io,
 	.init_early	= tegra_init_early,
 	.init_irq       = tegra_init_irq,
+	.handle_irq	= gic_handle_irq,
 	.timer          = &tegra_timer,
 	.init_machine   = tegra_trimslice_init,
+	.restart	= tegra_assert_system_reset,
 MACHINE_END
diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c
index 690b888..20f396d 100644
--- a/arch/arm/mach-tegra/common.c
+++ b/arch/arm/mach-tegra/common.c
@@ -31,8 +31,6 @@
 #include "clock.h"
 #include "fuse.h"
 
-void (*arch_reset)(char mode, const char *cmd) = tegra_assert_system_reset;
-
 void tegra_assert_system_reset(char mode, const char *cmd)
 {
 	void __iomem *reset = IO_ADDRESS(TEGRA_CLK_RESET_BASE + 0x04);
diff --git a/arch/arm/mach-tegra/include/mach/entry-macro.S b/arch/arm/mach-tegra/include/mach/entry-macro.S
index dd165c5..ac11262 100644
--- a/arch/arm/mach-tegra/include/mach/entry-macro.S
+++ b/arch/arm/mach-tegra/include/mach/entry-macro.S
@@ -12,30 +12,15 @@
  * GNU General Public License for more details.
  *
  */
-#include <mach/iomap.h>
-#include <mach/io.h>
-
-#if defined(CONFIG_ARM_GIC)
-#define HAVE_GET_IRQNR_PREAMBLE
-#include <asm/hardware/entry-macro-gic.S>
-
-	/* Uses the GIC interrupt controller built into the cpu */
-#define ICTRL_BASE (IO_CPU_VIRT + 0x100)
 
 	.macro	disable_fiq
 	.endm
 
-	.macro	get_irqnr_preamble, base, tmp
-	movw \base, #(ICTRL_BASE & 0x0000ffff)
-	movt \base, #((ICTRL_BASE & 0xffff0000) >> 16)
+	.macro	arch_ret_to_user, tmp1, tmp2
 	.endm
 
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-#else
+#if !defined(CONFIG_ARM_GIC)
 	/* legacy interrupt controller for AP16 */
-	.macro	disable_fiq
-	.endm
 
 	.macro	get_irqnr_preamble, base, tmp
 	@ enable imprecise aborts
@@ -46,9 +31,6 @@
 	orr \base, #0x0000f000
 	.endm
 
-	.macro	arch_ret_to_user, tmp1, tmp2
-	.endm
-
 	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
 	ldr \irqnr, [\base, #0x20]	@ EVT_IRQ_STS
 	cmp \irqnr, #0x80
diff --git a/arch/arm/mach-tegra/include/mach/io.h b/arch/arm/mach-tegra/include/mach/io.h
index 35a011f..f15deff 100644
--- a/arch/arm/mach-tegra/include/mach/io.h
+++ b/arch/arm/mach-tegra/include/mach/io.h
@@ -71,12 +71,6 @@
 
 #ifndef __ASSEMBLER__
 
-#define __arch_ioremap		tegra_ioremap
-#define __arch_iounmap		tegra_iounmap
-
-void __iomem *tegra_ioremap(unsigned long phys, size_t size, unsigned int type);
-void tegra_iounmap(volatile void __iomem *addr);
-
 #define IO_ADDRESS(n) (IO_TO_VIRT(n))
 
 #ifdef CONFIG_TEGRA_PCI
diff --git a/arch/arm/mach-tegra/include/mach/system.h b/arch/arm/mach-tegra/include/mach/system.h
index 027c421..a312988 100644
--- a/arch/arm/mach-tegra/include/mach/system.h
+++ b/arch/arm/mach-tegra/include/mach/system.h
@@ -21,10 +21,6 @@
 #ifndef __MACH_TEGRA_SYSTEM_H
 #define __MACH_TEGRA_SYSTEM_H
 
-#include <mach/iomap.h>
-
-extern void (*arch_reset)(char mode, const char *cmd);
-
 static inline void arch_idle(void)
 {
 }
diff --git a/arch/arm/mach-tegra/include/mach/vmalloc.h b/arch/arm/mach-tegra/include/mach/vmalloc.h
deleted file mode 100644
index fd6aa65..0000000
--- a/arch/arm/mach-tegra/include/mach/vmalloc.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/vmalloc.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- *	Colin Cross <ccross@google.com>
- *	Erik Gilling <konkers@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_VMALLOC_H
-#define __MACH_TEGRA_VMALLOC_H
-
-#include <asm/sizes.h>
-
-#define VMALLOC_END        0xFE000000UL
-
-#endif
diff --git a/arch/arm/mach-tegra/io.c b/arch/arm/mach-tegra/io.c
index 5489f8b..d23ee2d 100644
--- a/arch/arm/mach-tegra/io.c
+++ b/arch/arm/mach-tegra/io.c
@@ -60,24 +60,3 @@ void __init tegra_map_common_io(void)
 {
 	iotable_init(tegra_io_desc, ARRAY_SIZE(tegra_io_desc));
 }
-
-/*
- * Intercept ioremap() requests for addresses in our fixed mapping regions.
- */
-void __iomem *tegra_ioremap(unsigned long p, size_t size, unsigned int type)
-{
-	void __iomem *v = IO_ADDRESS(p);
-	if (v == NULL)
-		v = __arm_ioremap(p, size, type);
-	return v;
-}
-EXPORT_SYMBOL(tegra_ioremap);
-
-void tegra_iounmap(volatile void __iomem *addr)
-{
-	unsigned long virt = (unsigned long)addr;
-
-	if (virt >= VMALLOC_START && virt < VMALLOC_END)
-		__iounmap(addr);
-}
-EXPORT_SYMBOL(tegra_iounmap);
diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c
index e2272d2..732c724 100644
--- a/arch/arm/mach-tegra/timer.c
+++ b/arch/arm/mach-tegra/timer.c
@@ -19,7 +19,6 @@
 
 #include <linux/init.h>
 #include <linux/err.h>
-#include <linux/sched.h>
 #include <linux/time.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
@@ -106,25 +105,9 @@ static struct clock_event_device tegra_clockevent = {
 	.set_mode	= tegra_timer_set_mode,
 };
 
-static DEFINE_CLOCK_DATA(cd);
-
-/*
- * Constants generated by clocks_calc_mult_shift(m, s, 1MHz, NSEC_PER_SEC, 60).
- * This gives a resolution of about 1us and a wrap period of about 1h11min.
- */
-#define SC_MULT		4194304000u
-#define SC_SHIFT	22
-
-unsigned long long notrace sched_clock(void)
-{
-	u32 cyc = timer_readl(TIMERUS_CNTR_1US);
-	return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0, SC_MULT, SC_SHIFT);
-}
-
-static void notrace tegra_update_sched_clock(void)
+static u32 notrace tegra_read_sched_clock(void)
 {
-	u32 cyc = timer_readl(TIMERUS_CNTR_1US);
-	update_sched_clock(&cd, cyc, (u32)~0);
+	return timer_readl(TIMERUS_CNTR_1US);
 }
 
 /*
@@ -218,8 +201,7 @@ static void __init tegra_init_timer(void)
 		WARN(1, "Unknown clock rate");
 	}
 
-	init_fixed_sched_clock(&cd, tegra_update_sched_clock, 32,
-			       1000000, SC_MULT, SC_SHIFT);
+	setup_sched_clock(tegra_read_sched_clock, 32, 1000000);
 
 	if (clocksource_mmio_init(timer_reg_base + TIMERUS_CNTR_1US,
 		"timer_us", 1000000, 300, 32, clocksource_mmio_readl_up)) {
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index ac0791e..6979307 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -1888,3 +1888,23 @@ static int core_module_init(void)
 	return mmc_init(&mmcsd_device);
 }
 module_init(core_module_init);
+
+/* Forward declare this function from the watchdog */
+void coh901327_watchdog_reset(void);
+
+void u300_restart(char mode, const char *cmd)
+{
+	switch (mode) {
+	case 's':
+	case 'h':
+#ifdef CONFIG_COH901327_WATCHDOG
+		coh901327_watchdog_reset();
+#endif
+		break;
+	default:
+		/* Do nothing */
+		break;
+	}
+	/* Wait for system do die/reset. */
+	while (1);
+}
diff --git a/arch/arm/mach-u300/include/mach/entry-macro.S b/arch/arm/mach-u300/include/mach/entry-macro.S
index 20731ae..7181d6a 100644
--- a/arch/arm/mach-u300/include/mach/entry-macro.S
+++ b/arch/arm/mach-u300/include/mach/entry-macro.S
@@ -8,33 +8,9 @@
  * Low-level IRQ helper macros for ST-Ericsson U300
  * Author: Linus Walleij <linus.walleij@stericsson.com>
  */
-#include <mach/hardware.h>
-#include <asm/hardware/vic.h>
 
 	.macro	disable_fiq
 	.endm
 
-	.macro  get_irqnr_preamble, base, tmp
-	.endm
-
 	.macro  arch_ret_to_user, tmp1, tmp2
 	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr	\base, = U300_AHB_PER_VIRT_BASE-U300_AHB_PER_PHYS_BASE+U300_INTCON0_BASE
-	ldr	\irqstat, [\base, #VIC_IRQ_STATUS] @ get masked status
-	mov	\irqnr, #0
-	teq	\irqstat, #0
-	bne	1002f
-1001:	ldr	\base, = U300_AHB_PER_VIRT_BASE-U300_AHB_PER_PHYS_BASE+U300_INTCON1_BASE
-	ldr	\irqstat, [\base, #VIC_IRQ_STATUS] @ get masked status
-	mov	\irqnr, #32
-	teq	\irqstat, #0
-	beq	1003f
-1002:	tst	\irqstat, #1
-	bne	1003f
-	add	\irqnr, \irqnr, #1
-	movs	\irqstat, \irqstat, lsr #1
-	bne	1002b
-1003:		/* EQ will be set if no irqs pending */
-	.endm
diff --git a/arch/arm/mach-u300/include/mach/platform.h b/arch/arm/mach-u300/include/mach/platform.h
index 77d9210..096333f 100644
--- a/arch/arm/mach-u300/include/mach/platform.h
+++ b/arch/arm/mach-u300/include/mach/platform.h
@@ -14,6 +14,7 @@
 void u300_map_io(void);
 void u300_init_irq(void);
 void u300_init_devices(void);
+void u300_restart(char, const char *);
 extern struct sys_timer u300_timer;
 
 #endif
diff --git a/arch/arm/mach-u300/include/mach/system.h b/arch/arm/mach-u300/include/mach/system.h
index 8daf136..574d46e 100644
--- a/arch/arm/mach-u300/include/mach/system.h
+++ b/arch/arm/mach-u300/include/mach/system.h
@@ -8,35 +8,7 @@
  * System shutdown and reset functions.
  * Author: Linus Walleij <linus.walleij@stericsson.com>
  */
-#include <mach/hardware.h>
-#include <asm/io.h>
-#include <asm/hardware/vic.h>
-#include <asm/irq.h>
-
-/* Forward declare this function from the watchdog */
-void coh901327_watchdog_reset(void);
-
 static inline void arch_idle(void)
 {
 	cpu_do_idle();
 }
-
-static void arch_reset(char mode, const char *cmd)
-{
-	switch (mode) {
-	case 's':
-	case 'h':
-		printk(KERN_CRIT "RESET: shutting down/rebooting system\n");
-		/* Disable interrupts */
-		local_irq_disable();
-#ifdef CONFIG_COH901327_WATCHDOG
-		coh901327_watchdog_reset();
-#endif
-		break;
-	default:
-		/* Do nothing */
-		break;
-	}
-	/* Wait for system do die/reset. */
-	while (1);
-}
diff --git a/arch/arm/mach-u300/include/mach/vmalloc.h b/arch/arm/mach-u300/include/mach/vmalloc.h
deleted file mode 100644
index ec423b9..0000000
--- a/arch/arm/mach-u300/include/mach/vmalloc.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/include/mach/vmalloc.h
- *
- *
- * Copyright (C) 2006-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Virtual memory allocations
- * End must be above the I/O registers and on an even 2MiB boundary.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-#define VMALLOC_END	0xfe800000UL
diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c
index 5f51bde..bc1c789 100644
--- a/arch/arm/mach-u300/timer.c
+++ b/arch/arm/mach-u300/timer.c
@@ -9,7 +9,6 @@
  * Author: Linus Walleij <linus.walleij@stericsson.com>
  */
 #include <linux/interrupt.h>
-#include <linux/sched.h>
 #include <linux/time.h>
 #include <linux/timex.h>
 #include <linux/clockchips.h>
@@ -337,18 +336,10 @@ static struct irqaction u300_timer_irq = {
  * this wraps around for now, since it is just a relative time
  * stamp. (Inspired by OMAP implementation.)
  */
-static DEFINE_CLOCK_DATA(cd);
 
-unsigned long long notrace sched_clock(void)
+static u32 notrace u300_read_sched_clock(void)
 {
-	u32 cyc = readl(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC);
-	return cyc_to_sched_clock(&cd, cyc, (u32)~0);
-}
-
-static void notrace u300_update_sched_clock(void)
-{
-	u32 cyc = readl(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC);
-	update_sched_clock(&cd, cyc, (u32)~0);
+	return readl(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC);
 }
 
 
@@ -366,7 +357,7 @@ static void __init u300_timer_init(void)
 	clk_enable(clk);
 	rate = clk_get_rate(clk);
 
-	init_sched_clock(&cd, u300_update_sched_clock, 32, rate);
+	setup_sched_clock(u300_read_sched_clock, 32, rate);
 
 	/*
 	 * Disable the "OS" and "DD" timers - these are designed for Symbian!
diff --git a/arch/arm/mach-u300/u300.c b/arch/arm/mach-u300/u300.c
index 89422ee..def45bd 100644
--- a/arch/arm/mach-u300/u300.c
+++ b/arch/arm/mach-u300/u300.c
@@ -19,6 +19,7 @@
 #include <linux/io.h>
 #include <mach/hardware.h>
 #include <mach/platform.h>
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/memory.h>
@@ -49,6 +50,8 @@ MACHINE_START(U300, MACH_U300_STRING)
 	.atag_offset	= BOOT_PARAMS_OFFSET,
 	.map_io		= u300_map_io,
 	.init_irq	= u300_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &u300_timer,
 	.init_machine	= u300_init_machine,
+	.restart	= u300_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index bdd7b80..de1f5f8 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -33,6 +33,7 @@
 #include <linux/leds.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 
 #include <plat/i2c.h>
 #include <plat/ste_dma40.h>
@@ -695,6 +696,7 @@ MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
 	.init_irq	= ux500_init_irq,
 	/* we re-use nomadik timer here */
 	.timer		= &ux500_timer,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= mop500_init_machine,
 MACHINE_END
 
@@ -703,6 +705,7 @@ MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
 	.map_io		= u8500_map_io,
 	.init_irq	= ux500_init_irq,
 	.timer		= &ux500_timer,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= hrefv60_init_machine,
 MACHINE_END
 
@@ -712,5 +715,6 @@ MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
 	.init_irq	= ux500_init_irq,
 	/* we re-use nomadik timer here */
 	.timer		= &ux500_timer,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= snowball_init_machine,
 MACHINE_END
diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
index 82025ba..fe1569b 100644
--- a/arch/arm/mach-ux500/board-u5500.c
+++ b/arch/arm/mach-ux500/board-u5500.c
@@ -12,6 +12,7 @@
 #include <linux/i2c.h>
 #include <linux/mfd/ab5500/ab5500.h>
 
+#include <asm/hardware/gic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
@@ -149,5 +150,6 @@ MACHINE_START(U5500, "ST-Ericsson U5500 Platform")
 	.map_io		= u5500_map_io,
 	.init_irq	= ux500_init_irq,
 	.timer		= &ux500_timer,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= u5500_init_machine,
 MACHINE_END
diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c
index 9de1af0..5323286 100644
--- a/arch/arm/mach-ux500/cpu-db5500.c
+++ b/arch/arm/mach-ux500/cpu-db5500.c
@@ -30,12 +30,11 @@ static struct map_desc u5500_uart_io_desc[] __initdata = {
 };
 
 static struct map_desc u5500_io_desc[] __initdata = {
-	__IO_DEV_DESC(U5500_GIC_CPU_BASE, SZ_4K),
+	/* SCU base also covers GIC CPU BASE and TWD with its 4K page */
+	__IO_DEV_DESC(U5500_SCU_BASE, SZ_4K),
 	__IO_DEV_DESC(U5500_GIC_DIST_BASE, SZ_4K),
 	__IO_DEV_DESC(U5500_L2CC_BASE, SZ_4K),
-	__IO_DEV_DESC(U5500_TWD_BASE, SZ_4K),
 	__IO_DEV_DESC(U5500_MTU0_BASE, SZ_4K),
-	__IO_DEV_DESC(U5500_SCU_BASE, SZ_4K),
 	__IO_DEV_DESC(U5500_BACKUPRAM0_BASE, SZ_8K),
 
 	__IO_DEV_DESC(U5500_GPIO0_BASE, SZ_4K),
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 13e8890..7f2729c 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -35,12 +35,11 @@ static struct map_desc u8500_uart_io_desc[] __initdata = {
 };
 
 static struct map_desc u8500_io_desc[] __initdata = {
-	__IO_DEV_DESC(U8500_GIC_CPU_BASE, SZ_4K),
+	/* SCU base also covers GIC CPU BASE and TWD with its 4K page */
+	__IO_DEV_DESC(U8500_SCU_BASE, SZ_4K),
 	__IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K),
 	__IO_DEV_DESC(U8500_L2CC_BASE, SZ_4K),
-	__IO_DEV_DESC(U8500_TWD_BASE, SZ_4K),
 	__IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K),
-	__IO_DEV_DESC(U8500_SCU_BASE, SZ_4K),
 	__IO_DEV_DESC(U8500_BACKUPRAM0_BASE, SZ_8K),
 
 	__IO_DEV_DESC(U8500_CLKRST1_BASE, SZ_4K),
diff --git a/arch/arm/mach-ux500/include/mach/entry-macro.S b/arch/arm/mach-ux500/include/mach/entry-macro.S
index 071bba9..e16299e 100644
--- a/arch/arm/mach-ux500/include/mach/entry-macro.S
+++ b/arch/arm/mach-ux500/include/mach/entry-macro.S
@@ -10,8 +10,6 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-#include <mach/hardware.h>
-#include <asm/hardware/entry-macro-gic.S>
 
 		.macro	disable_fiq
 		.endm
diff --git a/arch/arm/mach-ux500/include/mach/gpio.h b/arch/arm/mach-ux500/include/mach/gpio.h
index 7389df9..c01ef66 100644
--- a/arch/arm/mach-ux500/include/mach/gpio.h
+++ b/arch/arm/mach-ux500/include/mach/gpio.h
@@ -1,10 +1,5 @@
 #ifndef __ASM_ARCH_GPIO_H
 #define __ASM_ARCH_GPIO_H
 
-/*
- * 288 (#267 is the highest one actually hooked up) onchip GPIOs, plus enough
- * room for a couple of GPIO expanders.
- */
-#define ARCH_NR_GPIOS	350
 
 #endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-ux500/include/mach/system.h b/arch/arm/mach-ux500/include/mach/system.h
index c0cd800..258e5c9 100644
--- a/arch/arm/mach-ux500/include/mach/system.h
+++ b/arch/arm/mach-ux500/include/mach/system.h
@@ -17,9 +17,4 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode, const char *cmd)
-{
-	/* yet to be implemented - TODO */
-}
-
 #endif
diff --git a/arch/arm/mach-ux500/include/mach/vmalloc.h b/arch/arm/mach-ux500/include/mach/vmalloc.h
deleted file mode 100644
index a4945cb..0000000
--- a/arch/arm/mach-ux500/include/mach/vmalloc.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- *  Copyright (C) 2009 ST-Ericsson
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define VMALLOC_END	0xf0000000UL
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index e340a54..02b7b93 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -22,7 +22,6 @@
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
-#include <linux/sysdev.h>
 #include <linux/interrupt.h>
 #include <linux/irqdomain.h>
 #include <linux/of_address.h>
@@ -141,11 +140,6 @@ static struct map_desc versatile_io_desc[] __initdata = {
 	},
 #ifdef CONFIG_MACH_VERSATILE_AB
  	{
-		.virtual	=  IO_ADDRESS(VERSATILE_GPIO0_BASE),
-		.pfn		= __phys_to_pfn(VERSATILE_GPIO0_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
 		.virtual	=  IO_ADDRESS(VERSATILE_IB2_BASE),
 		.pfn		= __phys_to_pfn(VERSATILE_IB2_BASE),
 		.length		= SZ_64M,
@@ -745,6 +739,19 @@ static void versatile_leds_event(led_event_t ledevt)
 }
 #endif	/* CONFIG_LEDS */
 
+void versatile_restart(char mode, const char *cmd)
+{
+	void __iomem *sys = __io_address(VERSATILE_SYS_BASE);
+	u32 val;
+
+	val = __raw_readl(sys + VERSATILE_SYS_RESETCTL_OFFSET);
+	val |= 0x105;
+
+	__raw_writel(0xa05f, sys + VERSATILE_SYS_LOCK_OFFSET);
+	__raw_writel(val, sys + VERSATILE_SYS_RESETCTL_OFFSET);
+	__raw_writel(0, sys + VERSATILE_SYS_LOCK_OFFSET);
+}
+
 /* Early initializations */
 void __init versatile_init_early(void)
 {
diff --git a/arch/arm/mach-versatile/core.h b/arch/arm/mach-versatile/core.h
index e014227..2ef2f55 100644
--- a/arch/arm/mach-versatile/core.h
+++ b/arch/arm/mach-versatile/core.h
@@ -30,6 +30,7 @@ extern void __init versatile_init_early(void);
 extern void __init versatile_init_irq(void);
 extern void __init versatile_map_io(void);
 extern struct sys_timer versatile_timer;
+extern void versatile_restart(char, const char *);
 extern unsigned int mmc_status(struct device *dev);
 #ifdef CONFIG_OF
 extern struct of_dev_auxdata versatile_auxdata_lookup[];
diff --git a/arch/arm/mach-versatile/include/mach/entry-macro.S b/arch/arm/mach-versatile/include/mach/entry-macro.S
index e6f7c16..b6f0dbf 100644
--- a/arch/arm/mach-versatile/include/mach/entry-macro.S
+++ b/arch/arm/mach-versatile/include/mach/entry-macro.S
@@ -7,39 +7,9 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include <asm/hardware/vic.h>
 
 		.macro	disable_fiq
 		.endm
 
-		.macro  get_irqnr_preamble, base, tmp
-		ldr	\base, =IO_ADDRESS(VERSATILE_VIC_BASE)
-		.endm
-
 		.macro  arch_ret_to_user, tmp1, tmp2
 		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\irqstat, [\base, #VIC_IRQ_STATUS]	@ get masked status
-		mov	\irqnr, #0
-		teq	\irqstat, #0
-		beq	1003f
-
-1001:		tst	\irqstat, #15
-		bne	1002f
-		add	\irqnr, \irqnr, #4
-		movs	\irqstat, \irqstat, lsr #4
-		bne	1001b
-1002:		tst	\irqstat, #1
-		bne	1003f
-		add	\irqnr, \irqnr, #1
-		movs	\irqstat, \irqstat, lsr #1
-		bne	1002b
-1003:		/* EQ will be set if no irqs pending */
-
-@		clz	\irqnr, \irqstat
-@1003:		/* EQ will be set if we reach MAXIRQNUM */
-		.endm
-
diff --git a/arch/arm/mach-versatile/include/mach/system.h b/arch/arm/mach-versatile/include/mach/system.h
index 8ffc12a..f3fa347 100644
--- a/arch/arm/mach-versatile/include/mach/system.h
+++ b/arch/arm/mach-versatile/include/mach/system.h
@@ -21,10 +21,6 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/platform.h>
-
 static inline void arch_idle(void)
 {
 	/*
@@ -34,16 +30,4 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode, const char *cmd)
-{
-	u32 val;
-
-	val = __raw_readl(IO_ADDRESS(VERSATILE_SYS_RESETCTL)) & ~0x7;
-	val |= 0x105;
-
-	__raw_writel(0xa05f, IO_ADDRESS(VERSATILE_SYS_LOCK));
-	__raw_writel(val, IO_ADDRESS(VERSATILE_SYS_RESETCTL));
-	__raw_writel(0, IO_ADDRESS(VERSATILE_SYS_LOCK));
-}
-
 #endif
diff --git a/arch/arm/mach-versatile/include/mach/vmalloc.h b/arch/arm/mach-versatile/include/mach/vmalloc.h
deleted file mode 100644
index 7d8e069..0000000
--- a/arch/arm/mach-versatile/include/mach/vmalloc.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  arch/arm/mach-versatile/include/mach/vmalloc.h
- *
- *  Copyright (C) 2003 ARM Limited
- *  Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define VMALLOC_END		0xd8000000UL
diff --git a/arch/arm/mach-versatile/versatile_ab.c b/arch/arm/mach-versatile/versatile_ab.c
index fda4866..98f6549 100644
--- a/arch/arm/mach-versatile/versatile_ab.c
+++ b/arch/arm/mach-versatile/versatile_ab.c
@@ -21,12 +21,12 @@
 
 #include <linux/init.h>
 #include <linux/device.h>
-#include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 
 #include <asm/mach/arch.h>
@@ -39,6 +39,8 @@ MACHINE_START(VERSATILE_AB, "ARM-Versatile AB")
 	.map_io		= versatile_map_io,
 	.init_early	= versatile_init_early,
 	.init_irq	= versatile_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &versatile_timer,
 	.init_machine	= versatile_init,
+	.restart	= versatile_restart,
 MACHINE_END
diff --git a/arch/arm/mach-versatile/versatile_dt.c b/arch/arm/mach-versatile/versatile_dt.c
index 54e037c..ae5ad3c 100644
--- a/arch/arm/mach-versatile/versatile_dt.c
+++ b/arch/arm/mach-versatile/versatile_dt.c
@@ -24,6 +24,7 @@
 #include <linux/init.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -45,7 +46,9 @@ DT_MACHINE_START(VERSATILE_PB, "ARM-Versatile (Device Tree Support)")
 	.map_io		= versatile_map_io,
 	.init_early	= versatile_init_early,
 	.init_irq	= versatile_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &versatile_timer,
 	.init_machine	= versatile_dt_init,
 	.dt_compat	= versatile_dt_match,
+	.restart	= versatile_restart,
 MACHINE_END
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index feaf9cb..9581c19 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -21,13 +21,13 @@
 
 #include <linux/init.h>
 #include <linux/device.h>
-#include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
 #include <linux/amba/mmci.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
+#include <asm/hardware/vic.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
@@ -107,6 +107,8 @@ MACHINE_START(VERSATILE_PB, "ARM-Versatile PB")
 	.map_io		= versatile_map_io,
 	.init_early	= versatile_init_early,
 	.init_irq	= versatile_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &versatile_timer,
 	.init_machine	= versatile_pb_init,
+	.restart	= versatile_restart,
 MACHINE_END
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index 9311484..9b3d0fb 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -8,5 +8,7 @@ config ARCH_VEXPRESS_CA9X4
 	select ARM_ERRATA_720789
 	select ARM_ERRATA_751472
 	select ARM_ERRATA_753970
+	select HAVE_SMP
+	select MIGHT_HAVE_CACHE_L2X0
 
 endmenu
diff --git a/arch/arm/mach-vexpress/include/mach/entry-macro.S b/arch/arm/mach-vexpress/include/mach/entry-macro.S
index 73c1129..a14f9e6 100644
--- a/arch/arm/mach-vexpress/include/mach/entry-macro.S
+++ b/arch/arm/mach-vexpress/include/mach/entry-macro.S
@@ -1,5 +1,3 @@
-#include <asm/hardware/entry-macro-gic.S>
-
 	.macro	disable_fiq
 	.endm
 
diff --git a/arch/arm/mach-vexpress/include/mach/system.h b/arch/arm/mach-vexpress/include/mach/system.h
index 899a4e6..f653a8e 100644
--- a/arch/arm/mach-vexpress/include/mach/system.h
+++ b/arch/arm/mach-vexpress/include/mach/system.h
@@ -30,8 +30,4 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode, const char *cmd)
-{
-}
-
 #endif
diff --git a/arch/arm/mach-vexpress/include/mach/vmalloc.h b/arch/arm/mach-vexpress/include/mach/vmalloc.h
deleted file mode 100644
index f43a36e..0000000
--- a/arch/arm/mach-vexpress/include/mach/vmalloc.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  arch/arm/mach-vexpress/include/mach/vmalloc.h
- *
- *  Copyright (C) 2003 ARM Limited
- *  Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define VMALLOC_END		0xf8000000UL
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index 1fafc324..b4a28ca 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -10,7 +10,7 @@
 #include <linux/ata_platform.h>
 #include <linux/smsc911x.h>
 #include <linux/spinlock.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/usb/isp1760.h>
 #include <linux/clkdev.h>
 #include <linux/mtd/physmap.h>
@@ -23,6 +23,7 @@
 #include <asm/hardware/arm_timer.h>
 #include <asm/hardware/timer-sp.h>
 #include <asm/hardware/sp810.h>
+#include <asm/hardware/gic.h>
 
 #include <mach/ct-ca9x4.h>
 #include <mach/motherboard.h>
@@ -437,7 +438,6 @@ static void __init v2m_init(void)
 		amba_device_register(v2m_amba_devs[i], &iomem_resource);
 
 	pm_power_off = v2m_power_off;
-	arm_pm_restart = v2m_restart;
 
 	ct_desc->init_tile();
 }
@@ -448,5 +448,7 @@ MACHINE_START(VEXPRESS, "ARM-Versatile Express")
 	.init_early	= v2m_init_early,
 	.init_irq	= v2m_init_irq,
 	.timer		= &v2m_timer,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= v2m_init,
+	.restart	= v2m_restart,
 MACHINE_END
diff --git a/arch/arm/mach-vt8500/include/mach/vmalloc.h b/arch/arm/mach-vt8500/include/mach/vmalloc.h
deleted file mode 100644
index 4642290..0000000
--- a/arch/arm/mach-vt8500/include/mach/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  arch/arm/mach-vt8500/include/mach/vmalloc.h
- *
- *  Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define VMALLOC_END	0xd0000000UL
diff --git a/arch/arm/mach-w90x900/cpu.c b/arch/arm/mach-w90x900/cpu.c
index 0a235e5..604e1db 100644
--- a/arch/arm/mach-w90x900/cpu.c
+++ b/arch/arm/mach-w90x900/cpu.c
@@ -33,9 +33,11 @@
 #include <mach/regs-serial.h>
 #include <mach/regs-clock.h>
 #include <mach/regs-ebi.h>
+#include <mach/regs-timer.h>
 
 #include "cpu.h"
 #include "clock.h"
+#include "nuc9xx.h"
 
 /* Initial IO mappings */
 
@@ -222,3 +224,17 @@ void __init nuc900_init_clocks(void)
 	clkdev_add_table(nuc900_clkregs, ARRAY_SIZE(nuc900_clkregs));
 }
 
+#define	WTCR	(TMR_BA + 0x1C)
+#define	WTCLK	(1 << 10)
+#define	WTE	(1 << 7)
+#define	WTRE	(1 << 1)
+
+void nuc9xx_restart(char mode, const char *cmd)
+{
+	if (mode == 's') {
+		/* Jump into ROM at address 0 */
+		soft_restart(0);
+	} else {
+		__raw_writel(WTE | WTRE | WTCLK, WTCR);
+	}
+}
diff --git a/arch/arm/mach-w90x900/include/mach/system.h b/arch/arm/mach-w90x900/include/mach/system.h
index ce228bd..2aaeb93 100644
--- a/arch/arm/mach-w90x900/include/mach/system.h
+++ b/arch/arm/mach-w90x900/include/mach/system.h
@@ -14,28 +14,6 @@
  * (at your option) any later version.
  *
  */
-
-#include <linux/io.h>
-#include <asm/proc-fns.h>
-#include <mach/map.h>
-#include <mach/regs-timer.h>
-
-#define	WTCR	(TMR_BA + 0x1C)
-#define	WTCLK	(1 << 10)
-#define	WTE	(1 << 7)
-#define	WTRE	(1 << 1)
-
 static void arch_idle(void)
 {
 }
-
-static void arch_reset(char mode, const char *cmd)
-{
-	if (mode == 's') {
-		/* Jump into ROM at address 0 */
-		cpu_reset(0);
-	} else {
-		__raw_writel(WTE | WTRE | WTCLK, WTCR);
-	}
-}
-
diff --git a/arch/arm/mach-w90x900/include/mach/vmalloc.h b/arch/arm/mach-w90x900/include/mach/vmalloc.h
deleted file mode 100644
index b067e44..0000000
--- a/arch/arm/mach-w90x900/include/mach/vmalloc.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * arch/arm/mach-w90x900/include/mach/vmalloc.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/vmalloc.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END	  (0xe0000000UL)
-
-#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-w90x900/irq.c b/arch/arm/mach-w90x900/irq.c
index 7bf143c..d66d43a 100644
--- a/arch/arm/mach-w90x900/irq.c
+++ b/arch/arm/mach-w90x900/irq.c
@@ -19,7 +19,7 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/ptrace.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/io.h>
 
 #include <asm/irq.h>
@@ -28,6 +28,8 @@
 #include <mach/hardware.h>
 #include <mach/regs-irq.h>
 
+#include "nuc9xx.h"
+
 struct group_irq {
 	unsigned long		gpen;
 	unsigned int		enabled;
diff --git a/arch/arm/mach-w90x900/mach-nuc910evb.c b/arch/arm/mach-w90x900/mach-nuc910evb.c
index 31c1090..b4243e4 100644
--- a/arch/arm/mach-w90x900/mach-nuc910evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc910evb.c
@@ -38,4 +38,5 @@ MACHINE_START(W90P910EVB, "W90P910EVB")
 	.init_irq	= nuc900_init_irq,
 	.init_machine	= nuc910evb_init,
 	.timer		= &nuc900_timer,
+	.restart	= nuc9xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-w90x900/mach-nuc950evb.c b/arch/arm/mach-w90x900/mach-nuc950evb.c
index 4062e55..067d8f9 100644
--- a/arch/arm/mach-w90x900/mach-nuc950evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc950evb.c
@@ -41,4 +41,5 @@ MACHINE_START(W90P950EVB, "W90P950EVB")
 	.init_irq	= nuc900_init_irq,
 	.init_machine	= nuc950evb_init,
 	.timer		= &nuc900_timer,
+	.restart	= nuc9xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-w90x900/mach-nuc960evb.c b/arch/arm/mach-w90x900/mach-nuc960evb.c
index 0ab9995..cbb3adc 100644
--- a/arch/arm/mach-w90x900/mach-nuc960evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc960evb.c
@@ -38,4 +38,5 @@ MACHINE_START(W90N960EVB, "W90N960EVB")
 	.init_irq	= nuc900_init_irq,
 	.init_machine	= nuc960evb_init,
 	.timer		= &nuc900_timer,
+	.restart	= nuc9xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-w90x900/nuc910.h b/arch/arm/mach-w90x900/nuc910.h
index 83e9ba5..b14c71a 100644
--- a/arch/arm/mach-w90x900/nuc910.h
+++ b/arch/arm/mach-w90x900/nuc910.h
@@ -12,14 +12,7 @@
  * published by the Free Software Foundation.
  *
  */
-
-struct map_desc;
-struct sys_timer;
-
-/* core initialisation functions */
-
-extern void nuc900_init_irq(void);
-extern struct sys_timer nuc900_timer;
+#include "nuc9xx.h"
 
 /* extern file from nuc910.c */
 
diff --git a/arch/arm/mach-w90x900/nuc950.h b/arch/arm/mach-w90x900/nuc950.h
index 98a1148..6e9de30 100644
--- a/arch/arm/mach-w90x900/nuc950.h
+++ b/arch/arm/mach-w90x900/nuc950.h
@@ -12,14 +12,7 @@
  * published by the Free Software Foundation.
  *
  */
-
-struct map_desc;
-struct sys_timer;
-
-/* core initialisation functions */
-
-extern void nuc900_init_irq(void);
-extern struct sys_timer nuc900_timer;
+#include "nuc9xx.h"
 
 /* extern file from nuc950.c */
 
diff --git a/arch/arm/mach-w90x900/nuc960.h b/arch/arm/mach-w90x900/nuc960.h
index f0c07cb..9f6df9a 100644
--- a/arch/arm/mach-w90x900/nuc960.h
+++ b/arch/arm/mach-w90x900/nuc960.h
@@ -12,14 +12,7 @@
  * published by the Free Software Foundation.
  *
  */
-
-struct map_desc;
-struct sys_timer;
-
-/* core initialisation functions */
-
-extern void nuc900_init_irq(void);
-extern struct sys_timer nuc900_timer;
+#include "nuc9xx.h"
 
 /* extern file from nuc960.c */
 
diff --git a/arch/arm/mach-w90x900/nuc9xx.h b/arch/arm/mach-w90x900/nuc9xx.h
new file mode 100644
index 0000000..91acb40
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc9xx.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/mach-w90x900/nuc9xx.h
+ *
+ * Copied from nuc910.h, which had:
+ *
+ * Copyright (c) 2008 Nuvoton corporation
+ *
+ * Header file for NUC900 CPU support
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+struct map_desc;
+struct sys_timer;
+
+/* core initialisation functions */
+
+extern void nuc900_init_irq(void);
+extern struct sys_timer nuc900_timer;
+extern void nuc9xx_restart(char, const char *);
diff --git a/arch/arm/mach-w90x900/time.c b/arch/arm/mach-w90x900/time.c
index a2c4e2d..fa27c49 100644
--- a/arch/arm/mach-w90x900/time.c
+++ b/arch/arm/mach-w90x900/time.c
@@ -33,6 +33,8 @@
 #include <mach/map.h>
 #include <mach/regs-timer.h>
 
+#include "nuc9xx.h"
+
 #define RESETINT	0x1f
 #define PERIOD		(0x01 << 27)
 #define ONESHOT		(0x00 << 27)
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index 73e9368..ab5cfdd 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -112,6 +112,7 @@ static const char *xilinx_dt_match[] = {
 MACHINE_START(XILINX_EP107, "Xilinx Zynq Platform")
 	.map_io		= xilinx_map_io,
 	.init_irq	= xilinx_irq_init,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= xilinx_init_machine,
 	.timer		= &xttcpss_sys_timer,
 	.dt_compat	= xilinx_dt_match,
diff --git a/arch/arm/mach-zynq/include/mach/entry-macro.S b/arch/arm/mach-zynq/include/mach/entry-macro.S
index 3cfc01b..d621fb7 100644
--- a/arch/arm/mach-zynq/include/mach/entry-macro.S
+++ b/arch/arm/mach-zynq/include/mach/entry-macro.S
@@ -20,9 +20,6 @@
  * GNU General Public License for more details.
  */
 
-#include <mach/hardware.h>
-#include <asm/hardware/entry-macro-gic.S>
-
 		.macro  disable_fiq
 		.endm
 
diff --git a/arch/arm/mach-zynq/include/mach/system.h b/arch/arm/mach-zynq/include/mach/system.h
index 1b84d70..8e88e0b 100644
--- a/arch/arm/mach-zynq/include/mach/system.h
+++ b/arch/arm/mach-zynq/include/mach/system.h
@@ -20,9 +20,4 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode, const char *cmd)
-{
-	/* Add architecture specific reset processing here */
-}
-
 #endif
diff --git a/arch/arm/mach-zynq/include/mach/vmalloc.h b/arch/arm/mach-zynq/include/mach/vmalloc.h
deleted file mode 100644
index 2398eff..0000000
--- a/arch/arm/mach-zynq/include/mach/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* arch/arm/mach-zynq/include/mach/vmalloc.h
- *
- *  Copyright (C) 2011 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_VMALLOC_H__
-#define __MACH_VMALLOC_H__
-
-#define VMALLOC_END       0xE0000000UL
-
-#endif
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 67f75a0..4cefb57 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -629,6 +629,23 @@ config IO_36
 
 comment "Processor Features"
 
+config ARM_LPAE
+	bool "Support for the Large Physical Address Extension"
+	depends on MMU && CPU_V7
+	help
+	  Say Y if you have an ARMv7 processor supporting the LPAE page
+	  table format and you would like to access memory beyond the
+	  4GB limit. The resulting kernel image will not run on
+	  processors without the LPA extension.
+
+	  If unsure, say N.
+
+config ARCH_PHYS_ADDR_T_64BIT
+	def_bool ARM_LPAE
+
+config ARCH_DMA_ADDR_T_64BIT
+	bool
+
 config ARM_THUMB
 	bool "Support Thumb user binaries"
 	depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_V6 || CPU_V6K || CPU_V7 || CPU_FEROCEON
@@ -816,14 +833,23 @@ config CACHE_FEROCEON_L2_WRITETHROUGH
 	  Say Y here to use the Feroceon L2 cache in writethrough mode.
 	  Unless you specifically require this, say N for writeback mode.
 
+config MIGHT_HAVE_CACHE_L2X0
+	bool
+	help
+	  This option should be selected by machines which have a L2x0
+	  or PL310 cache controller, but where its use is optional.
+
+	  The only effect of this option is to make CACHE_L2X0 and
+	  related options available to the user for configuration.
+
+	  Boards or SoCs which always require the cache controller
+	  support to be present should select CACHE_L2X0 directly
+	  instead of this option, thus preventing the user from
+	  inadvertently configuring a broken kernel.
+
 config CACHE_L2X0
-	bool "Enable the L2x0 outer cache controller"
-	depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
-		   REALVIEW_EB_A9MP || ARCH_IMX_V6_V7 || MACH_REALVIEW_PBX || \
-		   ARCH_NOMADIK || ARCH_OMAP4 || ARCH_EXYNOS4 || ARCH_TEGRA || \
-		   ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE || \
-		   ARCH_PRIMA2 || ARCH_ZYNQ || ARCH_CNS3XXX || ARCH_HIGHBANK
-	default y
+	bool "Enable the L2x0 outer cache controller" if MIGHT_HAVE_CACHE_L2X0
+	default MIGHT_HAVE_CACHE_L2X0
 	select OUTER_CACHE
 	select OUTER_CACHE_SYNC
 	help
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index c335c76..caf14dc 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -968,7 +968,7 @@ static int __init alignment_init(void)
 		ai_usermode = safe_usermode(ai_usermode, false);
 	}
 
-	hook_fault_code(1, do_alignment, SIGBUS, BUS_ADRALN,
+	hook_fault_code(FAULT_CODE_ALIGNMENT, do_alignment, SIGBUS, BUS_ADRALN,
 			"alignment exception");
 
 	/*
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index 8ac9e9f..b1e192b 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -61,7 +61,7 @@ static inline void cache_sync(void)
 {
 	void __iomem *base = l2x0_base;
 
-#ifdef CONFIG_ARM_ERRATA_753970
+#ifdef CONFIG_PL310_ERRATA_753970
 	/* write to an unmmapped register */
 	writel_relaxed(0, base + L2X0_DUMMY_REG);
 #else
diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c
index 93aac06..ee9bb36 100644
--- a/arch/arm/mm/context.c
+++ b/arch/arm/mm/context.c
@@ -22,6 +22,21 @@ unsigned int cpu_last_asid = ASID_FIRST_VERSION;
 DEFINE_PER_CPU(struct mm_struct *, current_mm);
 #endif
 
+#ifdef CONFIG_ARM_LPAE
+#define cpu_set_asid(asid) {						\
+	unsigned long ttbl, ttbh;					\
+	asm volatile(							\
+	"	mrrc	p15, 0, %0, %1, c2		@ read TTBR0\n"	\
+	"	mov	%1, %2, lsl #(48 - 32)		@ set ASID\n"	\
+	"	mcrr	p15, 0, %0, %1, c2		@ set TTBR0\n"	\
+	: "=&r" (ttbl), "=&r" (ttbh)					\
+	: "r" (asid & ~ASID_MASK));					\
+}
+#else
+#define cpu_set_asid(asid) \
+	asm("	mcr	p15, 0, %0, c13, c0, 1\n" : : "r" (asid))
+#endif
+
 /*
  * We fork()ed a process, and we need a new context for the child
  * to run in.  We reserve version 0 for initial tasks so we will
@@ -37,7 +52,7 @@ void __init_new_context(struct task_struct *tsk, struct mm_struct *mm)
 static void flush_context(void)
 {
 	/* set the reserved ASID before flushing the TLB */
-	asm("mcr	p15, 0, %0, c13, c0, 1\n" : : "r" (0));
+	cpu_set_asid(0);
 	isb();
 	local_flush_tlb_all();
 	if (icache_is_vivt_asid_tagged()) {
@@ -99,7 +114,7 @@ static void reset_context(void *info)
 	set_mm_context(mm, asid);
 
 	/* set the new ASID */
-	asm("mcr	p15, 0, %0, c13, c0, 1\n" : : "r" (mm->context.id));
+	cpu_set_asid(mm->context.id);
 	isb();
 }
 
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index e4e7f6c..1aa664a 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -168,7 +168,7 @@ static int __init consistent_init(void)
 	pte_t *pte;
 	int i = 0;
 	unsigned long base = consistent_base;
-	unsigned long num_ptes = (CONSISTENT_END - base) >> PGDIR_SHIFT;
+	unsigned long num_ptes = (CONSISTENT_END - base) >> PMD_SHIFT;
 
 	consistent_pte = kmalloc(num_ptes * sizeof(pte_t), GFP_KERNEL);
 	if (!consistent_pte) {
@@ -332,6 +332,15 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
 	struct page *page;
 	void *addr;
 
+	/*
+	 * Following is a work-around (a.k.a. hack) to prevent pages
+	 * with __GFP_COMP being passed to split_page() which cannot
+	 * handle them.  The real problem is that this flag probably
+	 * should be 0 on ARM as it is not supported on this
+	 * platform; see CONFIG_HUGETLBFS.
+	 */
+	gfp &= ~(__GFP_COMP);
+
 	*handle = ~0;
 	size = PAGE_ALIGN(size);
 
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index aa33949..bb7eac3 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -27,19 +27,6 @@
 
 #include "fault.h"
 
-/*
- * Fault status register encodings.  We steal bit 31 for our own purposes.
- */
-#define FSR_LNX_PF		(1 << 31)
-#define FSR_WRITE		(1 << 11)
-#define FSR_FS4			(1 << 10)
-#define FSR_FS3_0		(15)
-
-static inline int fsr_fs(unsigned int fsr)
-{
-	return (fsr & FSR_FS3_0) | (fsr & FSR_FS4) >> 6;
-}
-
 #ifdef CONFIG_MMU
 
 #ifdef CONFIG_KPROBES
@@ -123,8 +110,10 @@ void show_pte(struct mm_struct *mm, unsigned long addr)
 
 		pte = pte_offset_map(pmd, addr);
 		printk(", *pte=%08llx", (long long)pte_val(*pte));
+#ifndef CONFIG_ARM_LPAE
 		printk(", *ppte=%08llx",
 		       (long long)pte_val(pte[PTE_HWTABLE_PTRS]));
+#endif
 		pte_unmap(pte);
 	} while(0);
 
@@ -231,7 +220,7 @@ static inline bool access_error(unsigned int fsr, struct vm_area_struct *vma)
 
 static int __kprobes
 __do_page_fault(struct mm_struct *mm, unsigned long addr, unsigned int fsr,
-		struct task_struct *tsk)
+		unsigned int flags, struct task_struct *tsk)
 {
 	struct vm_area_struct *vma;
 	int fault;
@@ -253,18 +242,7 @@ good_area:
 		goto out;
 	}
 
-	/*
-	 * If for any reason at all we couldn't handle the fault, make
-	 * sure we exit gracefully rather than endlessly redo the fault.
-	 */
-	fault = handle_mm_fault(mm, vma, addr & PAGE_MASK, (fsr & FSR_WRITE) ? FAULT_FLAG_WRITE : 0);
-	if (unlikely(fault & VM_FAULT_ERROR))
-		return fault;
-	if (fault & VM_FAULT_MAJOR)
-		tsk->maj_flt++;
-	else
-		tsk->min_flt++;
-	return fault;
+	return handle_mm_fault(mm, vma, addr & PAGE_MASK, flags);
 
 check_stack:
 	if (vma->vm_flags & VM_GROWSDOWN && !expand_stack(vma, addr))
@@ -279,6 +257,9 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	struct task_struct *tsk;
 	struct mm_struct *mm;
 	int fault, sig, code;
+	int write = fsr & FSR_WRITE;
+	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
+				(write ? FAULT_FLAG_WRITE : 0);
 
 	if (notify_page_fault(regs, fsr))
 		return 0;
@@ -305,6 +286,7 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	if (!down_read_trylock(&mm->mmap_sem)) {
 		if (!user_mode(regs) && !search_exception_tables(regs->ARM_pc))
 			goto no_context;
+retry:
 		down_read(&mm->mmap_sem);
 	} else {
 		/*
@@ -320,14 +302,41 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 #endif
 	}
 
-	fault = __do_page_fault(mm, addr, fsr, tsk);
-	up_read(&mm->mmap_sem);
+	fault = __do_page_fault(mm, addr, fsr, flags, tsk);
+
+	/* If we need to retry but a fatal signal is pending, handle the
+	 * signal first. We do not need to release the mmap_sem because
+	 * it would already be released in __lock_page_or_retry in
+	 * mm/filemap.c. */
+	if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
+		return 0;
+
+	/*
+	 * Major/minor page fault accounting is only done on the
+	 * initial attempt. If we go through a retry, it is extremely
+	 * likely that the page will be found in page cache at that point.
+	 */
 
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, addr);
-	if (fault & VM_FAULT_MAJOR)
-		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, regs, addr);
-	else if (fault & VM_FAULT_MINOR)
-		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, regs, addr);
+	if (flags & FAULT_FLAG_ALLOW_RETRY) {
+		if (fault & VM_FAULT_MAJOR) {
+			tsk->maj_flt++;
+			perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1,
+					regs, addr);
+		} else {
+			tsk->min_flt++;
+			perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1,
+					regs, addr);
+		}
+		if (fault & VM_FAULT_RETRY) {
+			/* Clear FAULT_FLAG_ALLOW_RETRY to avoid any risk
+			* of starvation. */
+			flags &= ~FAULT_FLAG_ALLOW_RETRY;
+			goto retry;
+		}
+	}
+
+	up_read(&mm->mmap_sem);
 
 	/*
 	 * Handle the "normal" case first - VM_FAULT_MAJOR / VM_FAULT_MINOR
@@ -441,6 +450,12 @@ do_translation_fault(unsigned long addr, unsigned int fsr,
 	pmd = pmd_offset(pud, addr);
 	pmd_k = pmd_offset(pud_k, addr);
 
+#ifdef CONFIG_ARM_LPAE
+	/*
+	 * Only one hardware entry per PMD with LPAE.
+	 */
+	index = 0;
+#else
 	/*
 	 * On ARM one Linux PGD entry contains two hardware entries (see page
 	 * tables layout in pgtable.h). We normally guarantee that we always
@@ -450,6 +465,7 @@ do_translation_fault(unsigned long addr, unsigned int fsr,
 	 * for the first of pair.
 	 */
 	index = (addr >> SECTION_SHIFT) & 1;
+#endif
 	if (pmd_none(pmd_k[index]))
 		goto bad_area;
 
@@ -489,55 +505,20 @@ do_bad(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	return 1;
 }
 
-static struct fsr_info {
+struct fsr_info {
 	int	(*fn)(unsigned long addr, unsigned int fsr, struct pt_regs *regs);
 	int	sig;
 	int	code;
 	const char *name;
-} fsr_info[] = {
-	/*
-	 * The following are the standard ARMv3 and ARMv4 aborts.  ARMv5
-	 * defines these to be "precise" aborts.
-	 */
-	{ do_bad,		SIGSEGV, 0,		"vector exception"		   },
-	{ do_bad,		SIGBUS,	 BUS_ADRALN,	"alignment exception"		   },
-	{ do_bad,		SIGKILL, 0,		"terminal exception"		   },
-	{ do_bad,		SIGBUS,	 BUS_ADRALN,	"alignment exception"		   },
-	{ do_bad,		SIGBUS,	 0,		"external abort on linefetch"	   },
-	{ do_translation_fault,	SIGSEGV, SEGV_MAPERR,	"section translation fault"	   },
-	{ do_bad,		SIGBUS,	 0,		"external abort on linefetch"	   },
-	{ do_page_fault,	SIGSEGV, SEGV_MAPERR,	"page translation fault"	   },
-	{ do_bad,		SIGBUS,	 0,		"external abort on non-linefetch"  },
-	{ do_bad,		SIGSEGV, SEGV_ACCERR,	"section domain fault"		   },
-	{ do_bad,		SIGBUS,	 0,		"external abort on non-linefetch"  },
-	{ do_bad,		SIGSEGV, SEGV_ACCERR,	"page domain fault"		   },
-	{ do_bad,		SIGBUS,	 0,		"external abort on translation"	   },
-	{ do_sect_fault,	SIGSEGV, SEGV_ACCERR,	"section permission fault"	   },
-	{ do_bad,		SIGBUS,	 0,		"external abort on translation"	   },
-	{ do_page_fault,	SIGSEGV, SEGV_ACCERR,	"page permission fault"		   },
-	/*
-	 * The following are "imprecise" aborts, which are signalled by bit
-	 * 10 of the FSR, and may not be recoverable.  These are only
-	 * supported if the CPU abort handler supports bit 10.
-	 */
-	{ do_bad,		SIGBUS,  0,		"unknown 16"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 17"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 18"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 19"			   },
-	{ do_bad,		SIGBUS,  0,		"lock abort"			   }, /* xscale */
-	{ do_bad,		SIGBUS,  0,		"unknown 21"			   },
-	{ do_bad,		SIGBUS,  BUS_OBJERR,	"imprecise external abort"	   }, /* xscale */
-	{ do_bad,		SIGBUS,  0,		"unknown 23"			   },
-	{ do_bad,		SIGBUS,  0,		"dcache parity error"		   }, /* xscale */
-	{ do_bad,		SIGBUS,  0,		"unknown 25"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 26"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 27"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 28"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 29"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 30"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 31"			   }
 };
 
+/* FSR definition */
+#ifdef CONFIG_ARM_LPAE
+#include "fsr-3level.c"
+#else
+#include "fsr-2level.c"
+#endif
+
 void __init
 hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int, struct pt_regs *),
 		int sig, int code, const char *name)
@@ -573,42 +554,6 @@ do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	arm_notify_die("", regs, &info, fsr, 0);
 }
 
-
-static struct fsr_info ifsr_info[] = {
-	{ do_bad,		SIGBUS,  0,		"unknown 0"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 1"			   },
-	{ do_bad,		SIGBUS,  0,		"debug event"			   },
-	{ do_bad,		SIGSEGV, SEGV_ACCERR,	"section access flag fault"	   },
-	{ do_bad,		SIGBUS,  0,		"unknown 4"			   },
-	{ do_translation_fault,	SIGSEGV, SEGV_MAPERR,	"section translation fault"	   },
-	{ do_bad,		SIGSEGV, SEGV_ACCERR,	"page access flag fault"	   },
-	{ do_page_fault,	SIGSEGV, SEGV_MAPERR,	"page translation fault"	   },
-	{ do_bad,		SIGBUS,	 0,		"external abort on non-linefetch"  },
-	{ do_bad,		SIGSEGV, SEGV_ACCERR,	"section domain fault"		   },
-	{ do_bad,		SIGBUS,  0,		"unknown 10"			   },
-	{ do_bad,		SIGSEGV, SEGV_ACCERR,	"page domain fault"		   },
-	{ do_bad,		SIGBUS,	 0,		"external abort on translation"	   },
-	{ do_sect_fault,	SIGSEGV, SEGV_ACCERR,	"section permission fault"	   },
-	{ do_bad,		SIGBUS,	 0,		"external abort on translation"	   },
-	{ do_page_fault,	SIGSEGV, SEGV_ACCERR,	"page permission fault"		   },
-	{ do_bad,		SIGBUS,  0,		"unknown 16"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 17"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 18"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 19"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 20"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 21"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 22"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 23"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 24"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 25"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 26"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 27"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 28"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 29"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 30"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 31"			   },
-};
-
 void __init
 hook_ifault_code(int nr, int (*fn)(unsigned long, unsigned int, struct pt_regs *),
 		 int sig, int code, const char *name)
@@ -641,6 +586,7 @@ do_PrefetchAbort(unsigned long addr, unsigned int ifsr, struct pt_regs *regs)
 	arm_notify_die("", regs, &info, ifsr, 0);
 }
 
+#ifndef CONFIG_ARM_LPAE
 static int __init exceptions_init(void)
 {
 	if (cpu_architecture() >= CPU_ARCH_ARMv6) {
@@ -663,3 +609,4 @@ static int __init exceptions_init(void)
 }
 
 arch_initcall(exceptions_init);
+#endif
diff --git a/arch/arm/mm/fault.h b/arch/arm/mm/fault.h
index 49e9e38..cf08bdf 100644
--- a/arch/arm/mm/fault.h
+++ b/arch/arm/mm/fault.h
@@ -1,3 +1,28 @@
-void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs);
+#ifndef __ARCH_ARM_FAULT_H
+#define __ARCH_ARM_FAULT_H
+
+/*
+ * Fault status register encodings.  We steal bit 31 for our own purposes.
+ */
+#define FSR_LNX_PF		(1 << 31)
+#define FSR_WRITE		(1 << 11)
+#define FSR_FS4			(1 << 10)
+#define FSR_FS3_0		(15)
+#define FSR_FS5_0		(0x3f)
+
+#ifdef CONFIG_ARM_LPAE
+static inline int fsr_fs(unsigned int fsr)
+{
+	return fsr & FSR_FS5_0;
+}
+#else
+static inline int fsr_fs(unsigned int fsr)
+{
+	return (fsr & FSR_FS3_0) | (fsr & FSR_FS4) >> 6;
+}
+#endif
 
+void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs);
 unsigned long search_exception_table(unsigned long addr);
+
+#endif	/* __ARCH_ARM_FAULT_H */
diff --git a/arch/arm/mm/fsr-2level.c b/arch/arm/mm/fsr-2level.c
new file mode 100644
index 0000000..18ca74c
--- /dev/null
+++ b/arch/arm/mm/fsr-2level.c
@@ -0,0 +1,78 @@
+static struct fsr_info fsr_info[] = {
+	/*
+	 * The following are the standard ARMv3 and ARMv4 aborts.  ARMv5
+	 * defines these to be "precise" aborts.
+	 */
+	{ do_bad,		SIGSEGV, 0,		"vector exception"		   },
+	{ do_bad,		SIGBUS,	 BUS_ADRALN,	"alignment exception"		   },
+	{ do_bad,		SIGKILL, 0,		"terminal exception"		   },
+	{ do_bad,		SIGBUS,	 BUS_ADRALN,	"alignment exception"		   },
+	{ do_bad,		SIGBUS,	 0,		"external abort on linefetch"	   },
+	{ do_translation_fault,	SIGSEGV, SEGV_MAPERR,	"section translation fault"	   },
+	{ do_bad,		SIGBUS,	 0,		"external abort on linefetch"	   },
+	{ do_page_fault,	SIGSEGV, SEGV_MAPERR,	"page translation fault"	   },
+	{ do_bad,		SIGBUS,	 0,		"external abort on non-linefetch"  },
+	{ do_bad,		SIGSEGV, SEGV_ACCERR,	"section domain fault"		   },
+	{ do_bad,		SIGBUS,	 0,		"external abort on non-linefetch"  },
+	{ do_bad,		SIGSEGV, SEGV_ACCERR,	"page domain fault"		   },
+	{ do_bad,		SIGBUS,	 0,		"external abort on translation"	   },
+	{ do_sect_fault,	SIGSEGV, SEGV_ACCERR,	"section permission fault"	   },
+	{ do_bad,		SIGBUS,	 0,		"external abort on translation"	   },
+	{ do_page_fault,	SIGSEGV, SEGV_ACCERR,	"page permission fault"		   },
+	/*
+	 * The following are "imprecise" aborts, which are signalled by bit
+	 * 10 of the FSR, and may not be recoverable.  These are only
+	 * supported if the CPU abort handler supports bit 10.
+	 */
+	{ do_bad,		SIGBUS,  0,		"unknown 16"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 17"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 18"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 19"			   },
+	{ do_bad,		SIGBUS,  0,		"lock abort"			   }, /* xscale */
+	{ do_bad,		SIGBUS,  0,		"unknown 21"			   },
+	{ do_bad,		SIGBUS,  BUS_OBJERR,	"imprecise external abort"	   }, /* xscale */
+	{ do_bad,		SIGBUS,  0,		"unknown 23"			   },
+	{ do_bad,		SIGBUS,  0,		"dcache parity error"		   }, /* xscale */
+	{ do_bad,		SIGBUS,  0,		"unknown 25"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 26"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 27"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 28"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 29"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 30"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 31"			   },
+};
+
+static struct fsr_info ifsr_info[] = {
+	{ do_bad,		SIGBUS,  0,		"unknown 0"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 1"			   },
+	{ do_bad,		SIGBUS,  0,		"debug event"			   },
+	{ do_bad,		SIGSEGV, SEGV_ACCERR,	"section access flag fault"	   },
+	{ do_bad,		SIGBUS,  0,		"unknown 4"			   },
+	{ do_translation_fault,	SIGSEGV, SEGV_MAPERR,	"section translation fault"	   },
+	{ do_bad,		SIGSEGV, SEGV_ACCERR,	"page access flag fault"	   },
+	{ do_page_fault,	SIGSEGV, SEGV_MAPERR,	"page translation fault"	   },
+	{ do_bad,		SIGBUS,	 0,		"external abort on non-linefetch"  },
+	{ do_bad,		SIGSEGV, SEGV_ACCERR,	"section domain fault"		   },
+	{ do_bad,		SIGBUS,  0,		"unknown 10"			   },
+	{ do_bad,		SIGSEGV, SEGV_ACCERR,	"page domain fault"		   },
+	{ do_bad,		SIGBUS,	 0,		"external abort on translation"	   },
+	{ do_sect_fault,	SIGSEGV, SEGV_ACCERR,	"section permission fault"	   },
+	{ do_bad,		SIGBUS,	 0,		"external abort on translation"	   },
+	{ do_page_fault,	SIGSEGV, SEGV_ACCERR,	"page permission fault"		   },
+	{ do_bad,		SIGBUS,  0,		"unknown 16"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 17"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 18"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 19"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 20"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 21"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 22"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 23"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 24"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 25"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 26"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 27"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 28"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 29"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 30"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 31"			   },
+};
diff --git a/arch/arm/mm/fsr-3level.c b/arch/arm/mm/fsr-3level.c
new file mode 100644
index 0000000..05a4e94
--- /dev/null
+++ b/arch/arm/mm/fsr-3level.c
@@ -0,0 +1,68 @@
+static struct fsr_info fsr_info[] = {
+	{ do_bad,		SIGBUS,  0,		"unknown 0"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 1"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 2"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 3"			},
+	{ do_bad,		SIGBUS,  0,		"reserved translation fault"	},
+	{ do_translation_fault,	SIGSEGV, SEGV_MAPERR,	"level 1 translation fault"	},
+	{ do_translation_fault,	SIGSEGV, SEGV_MAPERR,	"level 2 translation fault"	},
+	{ do_page_fault,	SIGSEGV, SEGV_MAPERR,	"level 3 translation fault"	},
+	{ do_bad,		SIGBUS,  0,		"reserved access flag fault"	},
+	{ do_bad,		SIGSEGV, SEGV_ACCERR,	"level 1 access flag fault"	},
+	{ do_bad,		SIGSEGV, SEGV_ACCERR,	"level 2 access flag fault"	},
+	{ do_page_fault,	SIGSEGV, SEGV_ACCERR,	"level 3 access flag fault"	},
+	{ do_bad,		SIGBUS,  0,		"reserved permission fault"	},
+	{ do_bad,		SIGSEGV, SEGV_ACCERR,	"level 1 permission fault"	},
+	{ do_sect_fault,	SIGSEGV, SEGV_ACCERR,	"level 2 permission fault"	},
+	{ do_page_fault,	SIGSEGV, SEGV_ACCERR,	"level 3 permission fault"	},
+	{ do_bad,		SIGBUS,  0,		"synchronous external abort"	},
+	{ do_bad,		SIGBUS,  0,		"asynchronous external abort"	},
+	{ do_bad,		SIGBUS,  0,		"unknown 18"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 19"			},
+	{ do_bad,		SIGBUS,  0,		"synchronous abort (translation table walk)" },
+	{ do_bad,		SIGBUS,  0,		"synchronous abort (translation table walk)" },
+	{ do_bad,		SIGBUS,  0,		"synchronous abort (translation table walk)" },
+	{ do_bad,		SIGBUS,  0,		"synchronous abort (translation table walk)" },
+	{ do_bad,		SIGBUS,  0,		"synchronous parity error"	},
+	{ do_bad,		SIGBUS,  0,		"asynchronous parity error"	},
+	{ do_bad,		SIGBUS,  0,		"unknown 26"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 27"			},
+	{ do_bad,		SIGBUS,  0,		"synchronous parity error (translation table walk" },
+	{ do_bad,		SIGBUS,  0,		"synchronous parity error (translation table walk" },
+	{ do_bad,		SIGBUS,  0,		"synchronous parity error (translation table walk" },
+	{ do_bad,		SIGBUS,  0,		"synchronous parity error (translation table walk" },
+	{ do_bad,		SIGBUS,  0,		"unknown 32"			},
+	{ do_bad,		SIGBUS,  BUS_ADRALN,	"alignment fault"		},
+	{ do_bad,		SIGBUS,  0,		"debug event"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 35"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 36"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 37"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 38"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 39"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 40"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 41"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 42"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 43"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 44"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 45"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 46"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 47"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 48"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 49"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 50"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 51"			},
+	{ do_bad,		SIGBUS,  0,		"implementation fault (lockdown abort)" },
+	{ do_bad,		SIGBUS,  0,		"unknown 53"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 54"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 55"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 56"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 57"			},
+	{ do_bad,		SIGBUS,  0,		"implementation fault (coprocessor abort)" },
+	{ do_bad,		SIGBUS,  0,		"unknown 59"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 60"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 61"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 62"			},
+	{ do_bad,		SIGBUS,  0,		"unknown 63"			},
+};
+
+#define ifsr_info	fsr_info
diff --git a/arch/arm/mm/idmap.c b/arch/arm/mm/idmap.c
index 2be9139..feacf4c 100644
--- a/arch/arm/mm/idmap.c
+++ b/arch/arm/mm/idmap.c
@@ -1,9 +1,38 @@
 #include <linux/kernel.h>
 
 #include <asm/cputype.h>
+#include <asm/idmap.h>
 #include <asm/pgalloc.h>
 #include <asm/pgtable.h>
+#include <asm/sections.h>
 
+pgd_t *idmap_pgd;
+
+#ifdef CONFIG_ARM_LPAE
+static void idmap_add_pmd(pud_t *pud, unsigned long addr, unsigned long end,
+	unsigned long prot)
+{
+	pmd_t *pmd;
+	unsigned long next;
+
+	if (pud_none_or_clear_bad(pud) || (pud_val(*pud) & L_PGD_SWAPPER)) {
+		pmd = pmd_alloc_one(&init_mm, addr);
+		if (!pmd) {
+			pr_warning("Failed to allocate identity pmd.\n");
+			return;
+		}
+		pud_populate(&init_mm, pud, pmd);
+		pmd += pmd_index(addr);
+	} else
+		pmd = pmd_offset(pud, addr);
+
+	do {
+		next = pmd_addr_end(addr, end);
+		*pmd = __pmd((addr & PMD_MASK) | prot);
+		flush_pmd_entry(pmd);
+	} while (pmd++, addr = next, addr != end);
+}
+#else	/* !CONFIG_ARM_LPAE */
 static void idmap_add_pmd(pud_t *pud, unsigned long addr, unsigned long end,
 	unsigned long prot)
 {
@@ -15,6 +44,7 @@ static void idmap_add_pmd(pud_t *pud, unsigned long addr, unsigned long end,
 	pmd[1] = __pmd(addr);
 	flush_pmd_entry(pmd);
 }
+#endif	/* CONFIG_ARM_LPAE */
 
 static void idmap_add_pud(pgd_t *pgd, unsigned long addr, unsigned long end,
 	unsigned long prot)
@@ -28,11 +58,11 @@ static void idmap_add_pud(pgd_t *pgd, unsigned long addr, unsigned long end,
 	} while (pud++, addr = next, addr != end);
 }
 
-void identity_mapping_add(pgd_t *pgd, unsigned long addr, unsigned long end)
+static void identity_mapping_add(pgd_t *pgd, unsigned long addr, unsigned long end)
 {
 	unsigned long prot, next;
 
-	prot = PMD_TYPE_SECT | PMD_SECT_AP_WRITE;
+	prot = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AF;
 	if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale())
 		prot |= PMD_BIT4;
 
@@ -43,48 +73,41 @@ void identity_mapping_add(pgd_t *pgd, unsigned long addr, unsigned long end)
 	} while (pgd++, addr = next, addr != end);
 }
 
-#ifdef CONFIG_SMP
-static void idmap_del_pmd(pud_t *pud, unsigned long addr, unsigned long end)
-{
-	pmd_t *pmd = pmd_offset(pud, addr);
-	pmd_clear(pmd);
-}
+extern char  __idmap_text_start[], __idmap_text_end[];
 
-static void idmap_del_pud(pgd_t *pgd, unsigned long addr, unsigned long end)
+static int __init init_static_idmap(void)
 {
-	pud_t *pud = pud_offset(pgd, addr);
-	unsigned long next;
+	phys_addr_t idmap_start, idmap_end;
 
-	do {
-		next = pud_addr_end(addr, end);
-		idmap_del_pmd(pud, addr, next);
-	} while (pud++, addr = next, addr != end);
-}
+	idmap_pgd = pgd_alloc(&init_mm);
+	if (!idmap_pgd)
+		return -ENOMEM;
 
-void identity_mapping_del(pgd_t *pgd, unsigned long addr, unsigned long end)
-{
-	unsigned long next;
+	/* Add an identity mapping for the physical address of the section. */
+	idmap_start = virt_to_phys((void *)__idmap_text_start);
+	idmap_end = virt_to_phys((void *)__idmap_text_end);
 
-	pgd += pgd_index(addr);
-	do {
-		next = pgd_addr_end(addr, end);
-		idmap_del_pud(pgd, addr, next);
-	} while (pgd++, addr = next, addr != end);
+	pr_info("Setting up static identity map for 0x%llx - 0x%llx\n",
+		(long long)idmap_start, (long long)idmap_end);
+	identity_mapping_add(idmap_pgd, idmap_start, idmap_end);
+
+	return 0;
 }
-#endif
+early_initcall(init_static_idmap);
 
 /*
- * In order to soft-boot, we need to insert a 1:1 mapping in place of
- * the user-mode pages.  This will then ensure that we have predictable
- * results when turning the mmu off
+ * In order to soft-boot, we need to switch to a 1:1 mapping for the
+ * cpu_reset functions. This will then ensure that we have predictable
+ * results when turning off the mmu.
  */
-void setup_mm_for_reboot(char mode)
+void setup_mm_for_reboot(void)
 {
-	/*
-	 * We need to access to user-mode page tables here. For kernel threads
-	 * we don't have any user-mode mappings so we use the context that we
-	 * "borrowed".
-	 */
-	identity_mapping_add(current->active_mm->pgd, 0, TASK_SIZE);
+	/* Clean and invalidate L1. */
+	flush_cache_all();
+
+	/* Switch to the identity mapping. */
+	cpu_switch_mm(idmap_pgd, &init_mm);
+
+	/* Flush the TLB. */
 	local_flush_tlb_all();
 }
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index fbdd12e..e34ea8a 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -20,7 +20,6 @@
 #include <linux/highmem.h>
 #include <linux/gfp.h>
 #include <linux/memblock.h>
-#include <linux/sort.h>
 
 #include <asm/mach-types.h>
 #include <asm/prom.h>
@@ -32,6 +31,7 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+#include <asm/memblock.h>
 
 #include "mm.h"
 
@@ -134,30 +134,18 @@ void show_mem(unsigned int filter)
 }
 
 static void __init find_limits(unsigned long *min, unsigned long *max_low,
-	unsigned long *max_high)
+			       unsigned long *max_high)
 {
 	struct meminfo *mi = &meminfo;
 	int i;
 
-	*min = -1UL;
-	*max_low = *max_high = 0;
-
-	for_each_bank (i, mi) {
-		struct membank *bank = &mi->bank[i];
-		unsigned long start, end;
-
-		start = bank_pfn_start(bank);
-		end = bank_pfn_end(bank);
-
-		if (*min > start)
-			*min = start;
-		if (*max_high < end)
-			*max_high = end;
-		if (bank->highmem)
-			continue;
-		if (*max_low < end)
-			*max_low = end;
-	}
+	/* This assumes the meminfo array is properly sorted */
+	*min = bank_pfn_start(&mi->bank[0]);
+	for_each_bank (i, mi)
+		if (mi->bank[i].highmem)
+				break;
+	*max_low = bank_pfn_end(&mi->bank[i - 1]);
+	*max_high = bank_pfn_end(&mi->bank[mi->nr_banks - 1]);
 }
 
 static void __init arm_bootmem_init(unsigned long start_pfn,
@@ -319,20 +307,10 @@ static void arm_memory_present(void)
 }
 #endif
 
-static int __init meminfo_cmp(const void *_a, const void *_b)
-{
-	const struct membank *a = _a, *b = _b;
-	long cmp = bank_pfn_start(a) - bank_pfn_start(b);
-	return cmp < 0 ? -1 : cmp > 0 ? 1 : 0;
-}
-
 void __init arm_memblock_init(struct meminfo *mi, struct machine_desc *mdesc)
 {
 	int i;
 
-	sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]), meminfo_cmp, NULL);
-
-	memblock_init();
 	for (i = 0; i < mi->nr_banks; i++)
 		memblock_add(mi->bank[i].start, mi->bank[i].size);
 
@@ -371,7 +349,7 @@ void __init arm_memblock_init(struct meminfo *mi, struct machine_desc *mdesc)
 	if (mdesc->reserve)
 		mdesc->reserve();
 
-	memblock_analyze();
+	memblock_allow_resize();
 	memblock_dump_all();
 }
 
@@ -403,8 +381,6 @@ void __init bootmem_init(void)
 	 */
 	arm_bootmem_free(min, max_low, max_high);
 
-	high_memory = __va(((phys_addr_t)max_low << PAGE_SHIFT) - 1) + 1;
-
 	/*
 	 * This doesn't seem to be used by the Linux memory manager any
 	 * more, but is used by ll_rw_block.  If we can get rid of it, we
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index bdb248c..80632e8 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -36,12 +36,6 @@
 #include <asm/mach/map.h>
 #include "mm.h"
 
-/*
- * Used by ioremap() and iounmap() code to mark (super)section-mapped
- * I/O regions in vm_struct->flags field.
- */
-#define VM_ARM_SECTION_MAPPING	0x80000000
-
 int ioremap_page(unsigned long virt, unsigned long phys,
 		 const struct mem_type *mtype)
 {
@@ -64,7 +58,7 @@ void __check_kvm_seq(struct mm_struct *mm)
 	} while (seq != init_mm.context.kvm_seq);
 }
 
-#ifndef CONFIG_SMP
+#if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE)
 /*
  * Section support is unsafe on SMP - If you iounmap and ioremap a region,
  * the other CPUs will not see this change until their next context switch.
@@ -79,13 +73,16 @@ static void unmap_area_sections(unsigned long virt, unsigned long size)
 {
 	unsigned long addr = virt, end = virt + (size & ~(SZ_1M - 1));
 	pgd_t *pgd;
+	pud_t *pud;
+	pmd_t *pmdp;
 
 	flush_cache_vunmap(addr, end);
 	pgd = pgd_offset_k(addr);
+	pud = pud_offset(pgd, addr);
+	pmdp = pmd_offset(pud, addr);
 	do {
-		pmd_t pmd, *pmdp = pmd_offset(pgd, addr);
+		pmd_t pmd = *pmdp;
 
-		pmd = *pmdp;
 		if (!pmd_none(pmd)) {
 			/*
 			 * Clear the PMD from the page table, and
@@ -104,8 +101,8 @@ static void unmap_area_sections(unsigned long virt, unsigned long size)
 				pte_free_kernel(&init_mm, pmd_page_vaddr(pmd));
 		}
 
-		addr += PGDIR_SIZE;
-		pgd++;
+		addr += PMD_SIZE;
+		pmdp += 2;
 	} while (addr < end);
 
 	/*
@@ -124,6 +121,8 @@ remap_area_sections(unsigned long virt, unsigned long pfn,
 {
 	unsigned long addr = virt, end = virt + size;
 	pgd_t *pgd;
+	pud_t *pud;
+	pmd_t *pmd;
 
 	/*
 	 * Remove and free any PTE-based mapping, and
@@ -132,17 +131,17 @@ remap_area_sections(unsigned long virt, unsigned long pfn,
 	unmap_area_sections(virt, size);
 
 	pgd = pgd_offset_k(addr);
+	pud = pud_offset(pgd, addr);
+	pmd = pmd_offset(pud, addr);
 	do {
-		pmd_t *pmd = pmd_offset(pgd, addr);
-
 		pmd[0] = __pmd(__pfn_to_phys(pfn) | type->prot_sect);
 		pfn += SZ_1M >> PAGE_SHIFT;
 		pmd[1] = __pmd(__pfn_to_phys(pfn) | type->prot_sect);
 		pfn += SZ_1M >> PAGE_SHIFT;
 		flush_pmd_entry(pmd);
 
-		addr += PGDIR_SIZE;
-		pgd++;
+		addr += PMD_SIZE;
+		pmd += 2;
 	} while (addr < end);
 
 	return 0;
@@ -154,6 +153,8 @@ remap_area_supersections(unsigned long virt, unsigned long pfn,
 {
 	unsigned long addr = virt, end = virt + size;
 	pgd_t *pgd;
+	pud_t *pud;
+	pmd_t *pmd;
 
 	/*
 	 * Remove and free any PTE-based mapping, and
@@ -162,6 +163,8 @@ remap_area_supersections(unsigned long virt, unsigned long pfn,
 	unmap_area_sections(virt, size);
 
 	pgd = pgd_offset_k(virt);
+	pud = pud_offset(pgd, addr);
+	pmd = pmd_offset(pud, addr);
 	do {
 		unsigned long super_pmd_val, i;
 
@@ -170,14 +173,12 @@ remap_area_supersections(unsigned long virt, unsigned long pfn,
 		super_pmd_val |= ((pfn >> (32 - PAGE_SHIFT)) & 0xf) << 20;
 
 		for (i = 0; i < 8; i++) {
-			pmd_t *pmd = pmd_offset(pgd, addr);
-
 			pmd[0] = __pmd(super_pmd_val);
 			pmd[1] = __pmd(super_pmd_val);
 			flush_pmd_entry(pmd);
 
-			addr += PGDIR_SIZE;
-			pgd++;
+			addr += PMD_SIZE;
+			pmd += 2;
 		}
 
 		pfn += SUPERSECTION_SIZE >> PAGE_SHIFT;
@@ -195,17 +196,13 @@ void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn,
 	unsigned long addr;
  	struct vm_struct * area;
 
+#ifndef CONFIG_ARM_LPAE
 	/*
 	 * High mappings must be supersection aligned
 	 */
 	if (pfn >= 0x100000 && (__pfn_to_phys(pfn) & ~SUPERSECTION_MASK))
 		return NULL;
-
-	/*
-	 * Don't allow RAM to be mapped - this causes problems with ARMv6+
-	 */
-	if (WARN_ON(pfn_valid(pfn)))
-		return NULL;
+#endif
 
 	type = get_mem_type(mtype);
 	if (!type)
@@ -216,12 +213,40 @@ void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn,
 	 */
 	size = PAGE_ALIGN(offset + size);
 
+	/*
+	 * Try to reuse one of the static mapping whenever possible.
+	 */
+	read_lock(&vmlist_lock);
+	for (area = vmlist; area; area = area->next) {
+		if (!size || (sizeof(phys_addr_t) == 4 && pfn >= 0x100000))
+			break;
+		if (!(area->flags & VM_ARM_STATIC_MAPPING))
+			continue;
+		if ((area->flags & VM_ARM_MTYPE_MASK) != VM_ARM_MTYPE(mtype))
+			continue;
+		if (__phys_to_pfn(area->phys_addr) > pfn ||
+		    __pfn_to_phys(pfn) + size-1 > area->phys_addr + area->size-1)
+			continue;
+		/* we can drop the lock here as we know *area is static */
+		read_unlock(&vmlist_lock);
+		addr = (unsigned long)area->addr;
+		addr += __pfn_to_phys(pfn) - area->phys_addr;
+		return (void __iomem *) (offset + addr);
+	}
+	read_unlock(&vmlist_lock);
+
+	/*
+	 * Don't allow RAM to be mapped - this causes problems with ARMv6+
+	 */
+	if (WARN_ON(pfn_valid(pfn)))
+		return NULL;
+
 	area = get_vm_area_caller(size, VM_IOREMAP, caller);
  	if (!area)
  		return NULL;
  	addr = (unsigned long)area->addr;
 
-#ifndef CONFIG_SMP
+#if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE)
 	if (DOMAIN_IO == 0 &&
 	    (((cpu_architecture() >= CPU_ARCH_ARMv6) && (get_cr() & CR_XP)) ||
 	       cpu_is_xsc3()) && pfn >= 0x100000 &&
@@ -313,28 +338,34 @@ __arm_ioremap_exec(unsigned long phys_addr, size_t size, bool cached)
 void __iounmap(volatile void __iomem *io_addr)
 {
 	void *addr = (void *)(PAGE_MASK & (unsigned long)io_addr);
-#ifndef CONFIG_SMP
-	struct vm_struct **p, *tmp;
+	struct vm_struct *vm;
 
-	/*
-	 * If this is a section based mapping we need to handle it
-	 * specially as the VM subsystem does not know how to handle
-	 * such a beast. We need the lock here b/c we need to clear
-	 * all the mappings before the area can be reclaimed
-	 * by someone else.
-	 */
-	write_lock(&vmlist_lock);
-	for (p = &vmlist ; (tmp = *p) ; p = &tmp->next) {
-		if ((tmp->flags & VM_IOREMAP) && (tmp->addr == addr)) {
-			if (tmp->flags & VM_ARM_SECTION_MAPPING) {
-				unmap_area_sections((unsigned long)tmp->addr,
-						    tmp->size);
-			}
+	read_lock(&vmlist_lock);
+	for (vm = vmlist; vm; vm = vm->next) {
+		if (vm->addr > addr)
+			break;
+		if (!(vm->flags & VM_IOREMAP))
+			continue;
+		/* If this is a static mapping we must leave it alone */
+		if ((vm->flags & VM_ARM_STATIC_MAPPING) &&
+		    (vm->addr <= addr) && (vm->addr + vm->size > addr)) {
+			read_unlock(&vmlist_lock);
+			return;
+		}
+#if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE)
+		/*
+		 * If this is a section based mapping we need to handle it
+		 * specially as the VM subsystem does not know how to handle
+		 * such a beast.
+		 */
+		if ((vm->addr == addr) &&
+		    (vm->flags & VM_ARM_SECTION_MAPPING)) {
+			unmap_area_sections((unsigned long)vm->addr, vm->size);
 			break;
 		}
-	}
-	write_unlock(&vmlist_lock);
 #endif
+	}
+	read_unlock(&vmlist_lock);
 
 	vunmap(addr);
 }
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index ad7cce3..70f6d3ea 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -21,6 +21,20 @@ const struct mem_type *get_mem_type(unsigned int type);
 
 extern void __flush_dcache_page(struct address_space *mapping, struct page *page);
 
+/*
+ * ARM specific vm_struct->flags bits.
+ */
+
+/* (super)section-mapped I/O regions used by ioremap()/iounmap() */
+#define VM_ARM_SECTION_MAPPING	0x80000000
+
+/* permanent static mappings from iotable_init() */
+#define VM_ARM_STATIC_MAPPING	0x40000000
+
+/* mapping type (attributes) for permanent static mappings */
+#define VM_ARM_MTYPE(mt)		((mt) << 20)
+#define VM_ARM_MTYPE_MASK	(0x1f << 20)
+
 #endif
 
 #ifdef CONFIG_ZONE_DMA
diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c
index 74be05f..ce8cb19 100644
--- a/arch/arm/mm/mmap.c
+++ b/arch/arm/mm/mmap.c
@@ -9,13 +9,51 @@
 #include <linux/io.h>
 #include <linux/personality.h>
 #include <linux/random.h>
-#include <asm/cputype.h>
-#include <asm/system.h>
+#include <asm/cachetype.h>
+
+static inline unsigned long COLOUR_ALIGN_DOWN(unsigned long addr,
+					      unsigned long pgoff)
+{
+	unsigned long base = addr & ~(SHMLBA-1);
+	unsigned long off = (pgoff << PAGE_SHIFT) & (SHMLBA-1);
+
+	if (base + off <= addr)
+		return base + off;
+
+	return base - off;
+}
 
 #define COLOUR_ALIGN(addr,pgoff)		\
 	((((addr)+SHMLBA-1)&~(SHMLBA-1)) +	\
 	 (((pgoff)<<PAGE_SHIFT) & (SHMLBA-1)))
 
+/* gap between mmap and stack */
+#define MIN_GAP (128*1024*1024UL)
+#define MAX_GAP ((TASK_SIZE)/6*5)
+
+static int mmap_is_legacy(void)
+{
+	if (current->personality & ADDR_COMPAT_LAYOUT)
+		return 1;
+
+	if (rlimit(RLIMIT_STACK) == RLIM_INFINITY)
+		return 1;
+
+	return sysctl_legacy_va_layout;
+}
+
+static unsigned long mmap_base(unsigned long rnd)
+{
+	unsigned long gap = rlimit(RLIMIT_STACK);
+
+	if (gap < MIN_GAP)
+		gap = MIN_GAP;
+	else if (gap > MAX_GAP)
+		gap = MAX_GAP;
+
+	return PAGE_ALIGN(TASK_SIZE - gap - rnd);
+}
+
 /*
  * We need to ensure that shared mappings are correctly aligned to
  * avoid aliasing issues with VIPT caches.  We need to ensure that
@@ -32,25 +70,15 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
 	struct mm_struct *mm = current->mm;
 	struct vm_area_struct *vma;
 	unsigned long start_addr;
-#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
-	unsigned int cache_type;
-	int do_align = 0, aliasing = 0;
+	int do_align = 0;
+	int aliasing = cache_is_vipt_aliasing();
 
 	/*
 	 * We only need to do colour alignment if either the I or D
-	 * caches alias.  This is indicated by bits 9 and 21 of the
-	 * cache type register.
+	 * caches alias.
 	 */
-	cache_type = read_cpuid_cachetype();
-	if (cache_type != read_cpuid_id()) {
-		aliasing = (cache_type | cache_type >> 12) & (1 << 11);
-		if (aliasing)
-			do_align = filp || flags & MAP_SHARED;
-	}
-#else
-#define do_align 0
-#define aliasing 0
-#endif
+	if (aliasing)
+		do_align = filp || (flags & MAP_SHARED);
 
 	/*
 	 * We enforce the MAP_FIXED case.
@@ -79,13 +107,9 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
 	if (len > mm->cached_hole_size) {
 	        start_addr = addr = mm->free_area_cache;
 	} else {
-	        start_addr = addr = TASK_UNMAPPED_BASE;
+	        start_addr = addr = mm->mmap_base;
 	        mm->cached_hole_size = 0;
 	}
-	/* 8 bits of randomness in 20 address space bits */
-	if ((current->flags & PF_RANDOMIZE) &&
-	    !(current->personality & ADDR_NO_RANDOMIZE))
-		addr += (get_random_int() % (1 << 8)) << PAGE_SHIFT;
 
 full_search:
 	if (do_align)
@@ -122,6 +146,134 @@ full_search:
 	}
 }
 
+unsigned long
+arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
+			const unsigned long len, const unsigned long pgoff,
+			const unsigned long flags)
+{
+	struct vm_area_struct *vma;
+	struct mm_struct *mm = current->mm;
+	unsigned long addr = addr0;
+	int do_align = 0;
+	int aliasing = cache_is_vipt_aliasing();
+
+	/*
+	 * We only need to do colour alignment if either the I or D
+	 * caches alias.
+	 */
+	if (aliasing)
+		do_align = filp || (flags & MAP_SHARED);
+
+	/* requested length too big for entire address space */
+	if (len > TASK_SIZE)
+		return -ENOMEM;
+
+	if (flags & MAP_FIXED) {
+		if (aliasing && flags & MAP_SHARED &&
+		    (addr - (pgoff << PAGE_SHIFT)) & (SHMLBA - 1))
+			return -EINVAL;
+		return addr;
+	}
+
+	/* requesting a specific address */
+	if (addr) {
+		if (do_align)
+			addr = COLOUR_ALIGN(addr, pgoff);
+		else
+			addr = PAGE_ALIGN(addr);
+		vma = find_vma(mm, addr);
+		if (TASK_SIZE - len >= addr &&
+				(!vma || addr + len <= vma->vm_start))
+			return addr;
+	}
+
+	/* check if free_area_cache is useful for us */
+	if (len <= mm->cached_hole_size) {
+		mm->cached_hole_size = 0;
+		mm->free_area_cache = mm->mmap_base;
+	}
+
+	/* either no address requested or can't fit in requested address hole */
+	addr = mm->free_area_cache;
+	if (do_align) {
+		unsigned long base = COLOUR_ALIGN_DOWN(addr - len, pgoff);
+		addr = base + len;
+	}
+
+	/* make sure it can fit in the remaining address space */
+	if (addr > len) {
+		vma = find_vma(mm, addr-len);
+		if (!vma || addr <= vma->vm_start)
+			/* remember the address as a hint for next time */
+			return (mm->free_area_cache = addr-len);
+	}
+
+	if (mm->mmap_base < len)
+		goto bottomup;
+
+	addr = mm->mmap_base - len;
+	if (do_align)
+		addr = COLOUR_ALIGN_DOWN(addr, pgoff);
+
+	do {
+		/*
+		 * Lookup failure means no vma is above this address,
+		 * else if new region fits below vma->vm_start,
+		 * return with success:
+		 */
+		vma = find_vma(mm, addr);
+		if (!vma || addr+len <= vma->vm_start)
+			/* remember the address as a hint for next time */
+			return (mm->free_area_cache = addr);
+
+		/* remember the largest hole we saw so far */
+		if (addr + mm->cached_hole_size < vma->vm_start)
+			mm->cached_hole_size = vma->vm_start - addr;
+
+		/* try just below the current vma->vm_start */
+		addr = vma->vm_start - len;
+		if (do_align)
+			addr = COLOUR_ALIGN_DOWN(addr, pgoff);
+	} while (len < vma->vm_start);
+
+bottomup:
+	/*
+	 * A failed mmap() very likely causes application failure,
+	 * so fall back to the bottom-up function here. This scenario
+	 * can happen with large stack limits and large mmap()
+	 * allocations.
+	 */
+	mm->cached_hole_size = ~0UL;
+	mm->free_area_cache = TASK_UNMAPPED_BASE;
+	addr = arch_get_unmapped_area(filp, addr0, len, pgoff, flags);
+	/*
+	 * Restore the topdown base:
+	 */
+	mm->free_area_cache = mm->mmap_base;
+	mm->cached_hole_size = ~0UL;
+
+	return addr;
+}
+
+void arch_pick_mmap_layout(struct mm_struct *mm)
+{
+	unsigned long random_factor = 0UL;
+
+	/* 8 bits of randomness in 20 address space bits */
+	if ((current->flags & PF_RANDOMIZE) &&
+	    !(current->personality & ADDR_NO_RANDOMIZE))
+		random_factor = (get_random_int() % (1 << 8)) << PAGE_SHIFT;
+
+	if (mmap_is_legacy()) {
+		mm->mmap_base = TASK_UNMAPPED_BASE + random_factor;
+		mm->get_unmapped_area = arch_get_unmapped_area;
+		mm->unmap_area = arch_unmap_area;
+	} else {
+		mm->mmap_base = mmap_base(random_factor);
+		mm->get_unmapped_area = arch_get_unmapped_area_topdown;
+		mm->unmap_area = arch_unmap_area_topdown;
+	}
+}
 
 /*
  * You really shouldn't be using read() or write() on /dev/mem.  This
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index dc8c550..94c5a0c 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -15,6 +15,7 @@
 #include <linux/nodemask.h>
 #include <linux/memblock.h>
 #include <linux/fs.h>
+#include <linux/vmalloc.h>
 
 #include <asm/cputype.h>
 #include <asm/sections.h>
@@ -150,6 +151,7 @@ static int __init early_nowrite(char *__unused)
 }
 early_param("nowb", early_nowrite);
 
+#ifndef CONFIG_ARM_LPAE
 static int __init early_ecc(char *p)
 {
 	if (memcmp(p, "on", 2) == 0)
@@ -159,6 +161,7 @@ static int __init early_ecc(char *p)
 	return 0;
 }
 early_param("ecc", early_ecc);
+#endif
 
 static int __init noalign_setup(char *__unused)
 {
@@ -228,10 +231,12 @@ static struct mem_type mem_types[] = {
 		.prot_sect = PMD_TYPE_SECT | PMD_SECT_XN,
 		.domain    = DOMAIN_KERNEL,
 	},
+#ifndef CONFIG_ARM_LPAE
 	[MT_MINICLEAN] = {
 		.prot_sect = PMD_TYPE_SECT | PMD_SECT_XN | PMD_SECT_MINICACHE,
 		.domain    = DOMAIN_KERNEL,
 	},
+#endif
 	[MT_LOW_VECTORS] = {
 		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
 				L_PTE_RDONLY,
@@ -429,6 +434,7 @@ static void __init build_mem_type_table(void)
 	 * ARMv6 and above have extended page tables.
 	 */
 	if (cpu_arch >= CPU_ARCH_ARMv6 && (cr & CR_XP)) {
+#ifndef CONFIG_ARM_LPAE
 		/*
 		 * Mark cache clean areas and XIP ROM read only
 		 * from SVC mode and no access from userspace.
@@ -436,6 +442,7 @@ static void __init build_mem_type_table(void)
 		mem_types[MT_ROM].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
 		mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
 		mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
+#endif
 
 		if (is_smp()) {
 			/*
@@ -474,6 +481,18 @@ static void __init build_mem_type_table(void)
 		mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_BUFFERABLE;
 	}
 
+#ifdef CONFIG_ARM_LPAE
+	/*
+	 * Do not generate access flag faults for the kernel mappings.
+	 */
+	for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
+		mem_types[i].prot_pte |= PTE_EXT_AF;
+		mem_types[i].prot_sect |= PMD_SECT_AF;
+	}
+	kern_pgprot |= PTE_EXT_AF;
+	vecs_pgprot |= PTE_EXT_AF;
+#endif
+
 	for (i = 0; i < 16; i++) {
 		unsigned long v = pgprot_val(protection_map[i]);
 		protection_map[i] = __pgprot(v | user_pgprot);
@@ -529,13 +548,18 @@ EXPORT_SYMBOL(phys_mem_access_prot);
 
 #define vectors_base()	(vectors_high() ? 0xffff0000 : 0)
 
-static void __init *early_alloc(unsigned long sz)
+static void __init *early_alloc_aligned(unsigned long sz, unsigned long align)
 {
-	void *ptr = __va(memblock_alloc(sz, sz));
+	void *ptr = __va(memblock_alloc(sz, align));
 	memset(ptr, 0, sz);
 	return ptr;
 }
 
+static void __init *early_alloc(unsigned long sz)
+{
+	return early_alloc_aligned(sz, sz);
+}
+
 static pte_t * __init early_pte_alloc(pmd_t *pmd, unsigned long addr, unsigned long prot)
 {
 	if (pmd_none(*pmd)) {
@@ -572,8 +596,10 @@ static void __init alloc_init_section(pud_t *pud, unsigned long addr,
 	if (((addr | end | phys) & ~SECTION_MASK) == 0) {
 		pmd_t *p = pmd;
 
+#ifndef CONFIG_ARM_LPAE
 		if (addr & SECTION_SIZE)
 			pmd++;
+#endif
 
 		do {
 			*pmd = __pmd(phys | type->prot_sect);
@@ -603,6 +629,7 @@ static void alloc_init_pud(pgd_t *pgd, unsigned long addr, unsigned long end,
 	} while (pud++, addr = next, addr != end);
 }
 
+#ifndef CONFIG_ARM_LPAE
 static void __init create_36bit_mapping(struct map_desc *md,
 					const struct mem_type *type)
 {
@@ -662,6 +689,7 @@ static void __init create_36bit_mapping(struct map_desc *md,
 		pgd += SUPERSECTION_SIZE >> PGDIR_SHIFT;
 	} while (addr != end);
 }
+#endif	/* !CONFIG_ARM_LPAE */
 
 /*
  * Create the page directory entries and any necessary
@@ -685,14 +713,16 @@ static void __init create_mapping(struct map_desc *md)
 	}
 
 	if ((md->type == MT_DEVICE || md->type == MT_ROM) &&
-	    md->virtual >= PAGE_OFFSET && md->virtual < VMALLOC_END) {
+	    md->virtual >= PAGE_OFFSET &&
+	    (md->virtual < VMALLOC_START || md->virtual >= VMALLOC_END)) {
 		printk(KERN_WARNING "BUG: mapping for 0x%08llx"
-		       " at 0x%08lx overlaps vmalloc space\n",
+		       " at 0x%08lx out of vmalloc space\n",
 		       (long long)__pfn_to_phys((u64)md->pfn), md->virtual);
 	}
 
 	type = &mem_types[md->type];
 
+#ifndef CONFIG_ARM_LPAE
 	/*
 	 * Catch 36-bit addresses
 	 */
@@ -700,6 +730,7 @@ static void __init create_mapping(struct map_desc *md)
 		create_36bit_mapping(md, type);
 		return;
 	}
+#endif
 
 	addr = md->virtual & PAGE_MASK;
 	phys = __pfn_to_phys(md->pfn);
@@ -729,18 +760,33 @@ static void __init create_mapping(struct map_desc *md)
  */
 void __init iotable_init(struct map_desc *io_desc, int nr)
 {
-	int i;
+	struct map_desc *md;
+	struct vm_struct *vm;
+
+	if (!nr)
+		return;
 
-	for (i = 0; i < nr; i++)
-		create_mapping(io_desc + i);
+	vm = early_alloc_aligned(sizeof(*vm) * nr, __alignof__(*vm));
+
+	for (md = io_desc; nr; md++, nr--) {
+		create_mapping(md);
+		vm->addr = (void *)(md->virtual & PAGE_MASK);
+		vm->size = PAGE_ALIGN(md->length + (md->virtual & ~PAGE_MASK));
+		vm->phys_addr = __pfn_to_phys(md->pfn); 
+		vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING; 
+		vm->flags |= VM_ARM_MTYPE(md->type);
+		vm->caller = iotable_init;
+		vm_area_add_early(vm++);
+	}
 }
 
-static void * __initdata vmalloc_min = (void *)(VMALLOC_END - SZ_128M);
+static void * __initdata vmalloc_min =
+	(void *)(VMALLOC_END - (240 << 20) - VMALLOC_OFFSET);
 
 /*
  * vmalloc=size forces the vmalloc area to be exactly 'size'
  * bytes. This can be used to increase (or decrease) the vmalloc
- * area - the default is 128m.
+ * area - the default is 240m.
  */
 static int __init early_vmalloc(char *arg)
 {
@@ -775,6 +821,9 @@ void __init sanity_check_meminfo(void)
 		struct membank *bank = &meminfo.bank[j];
 		*bank = meminfo.bank[i];
 
+		if (bank->start > ULONG_MAX)
+			highmem = 1;
+
 #ifdef CONFIG_HIGHMEM
 		if (__va(bank->start) >= vmalloc_min ||
 		    __va(bank->start) < (void *)PAGE_OFFSET)
@@ -786,7 +835,7 @@ void __init sanity_check_meminfo(void)
 		 * Split those memory banks which are partially overlapping
 		 * the vmalloc area greatly simplifying things later.
 		 */
-		if (__va(bank->start) < vmalloc_min &&
+		if (!highmem && __va(bank->start) < vmalloc_min &&
 		    bank->size > vmalloc_min - __va(bank->start)) {
 			if (meminfo.nr_banks >= NR_BANKS) {
 				printk(KERN_CRIT "NR_BANKS too low, "
@@ -807,6 +856,17 @@ void __init sanity_check_meminfo(void)
 		bank->highmem = highmem;
 
 		/*
+		 * Highmem banks not allowed with !CONFIG_HIGHMEM.
+		 */
+		if (highmem) {
+			printk(KERN_NOTICE "Ignoring RAM at %.8llx-%.8llx "
+			       "(!CONFIG_HIGHMEM).\n",
+			       (unsigned long long)bank->start,
+			       (unsigned long long)bank->start + bank->size - 1);
+			continue;
+		}
+
+		/*
 		 * Check whether this memory bank would entirely overlap
 		 * the vmalloc area.
 		 */
@@ -860,6 +920,7 @@ void __init sanity_check_meminfo(void)
 	}
 #endif
 	meminfo.nr_banks = j;
+	high_memory = __va(lowmem_limit - 1) + 1;
 	memblock_set_current_limit(lowmem_limit);
 }
 
@@ -890,14 +951,20 @@ static inline void prepare_page_table(void)
 
 	/*
 	 * Clear out all the kernel space mappings, except for the first
-	 * memory bank, up to the end of the vmalloc region.
+	 * memory bank, up to the vmalloc region.
 	 */
 	for (addr = __phys_to_virt(end);
-	     addr < VMALLOC_END; addr += PMD_SIZE)
+	     addr < VMALLOC_START; addr += PMD_SIZE)
 		pmd_clear(pmd_off_k(addr));
 }
 
+#ifdef CONFIG_ARM_LPAE
+/* the first page is reserved for pgd */
+#define SWAPPER_PG_DIR_SIZE	(PAGE_SIZE + \
+				 PTRS_PER_PGD * PTRS_PER_PMD * sizeof(pmd_t))
+#else
 #define SWAPPER_PG_DIR_SIZE	(PTRS_PER_PGD * sizeof(pgd_t))
+#endif
 
 /*
  * Reserve the special regions of memory
@@ -920,8 +987,8 @@ void __init arm_mm_memblock_reserve(void)
 }
 
 /*
- * Set up device the mappings.  Since we clear out the page tables for all
- * mappings above VMALLOC_END, we will remove any debug device mappings.
+ * Set up the device mappings.  Since we clear out the page tables for all
+ * mappings above VMALLOC_START, we will remove any debug device mappings.
  * This means you have to be careful how you debug this function, or any
  * called function.  This means you can't use any function or debugging
  * method which may touch any device, otherwise the kernel _will_ crash.
@@ -936,7 +1003,7 @@ static void __init devicemaps_init(struct machine_desc *mdesc)
 	 */
 	vectors_page = early_alloc(PAGE_SIZE);
 
-	for (addr = VMALLOC_END; addr; addr += PMD_SIZE)
+	for (addr = VMALLOC_START; addr; addr += PMD_SIZE)
 		pmd_clear(pmd_off_k(addr));
 
 	/*
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index 941a98c..4fc6794 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -29,6 +29,8 @@ void __init arm_mm_memblock_reserve(void)
 
 void __init sanity_check_meminfo(void)
 {
+	phys_addr_t end = bank_phys_end(&meminfo.bank[meminfo.nr_banks - 1]);
+	high_memory = __va(end - 1) + 1;
 }
 
 /*
@@ -43,7 +45,7 @@ void __init paging_init(struct machine_desc *mdesc)
 /*
  * We don't need to do anything here for nommu machines.
  */
-void setup_mm_for_reboot(char mode)
+void setup_mm_for_reboot(void)
 {
 }
 
diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c
index b2027c1..a3e78cc 100644
--- a/arch/arm/mm/pgd.c
+++ b/arch/arm/mm/pgd.c
@@ -10,6 +10,7 @@
 #include <linux/mm.h>
 #include <linux/gfp.h>
 #include <linux/highmem.h>
+#include <linux/slab.h>
 
 #include <asm/pgalloc.h>
 #include <asm/page.h>
@@ -17,6 +18,14 @@
 
 #include "mm.h"
 
+#ifdef CONFIG_ARM_LPAE
+#define __pgd_alloc()	kmalloc(PTRS_PER_PGD * sizeof(pgd_t), GFP_KERNEL)
+#define __pgd_free(pgd)	kfree(pgd)
+#else
+#define __pgd_alloc()	(pgd_t *)__get_free_pages(GFP_KERNEL, 2)
+#define __pgd_free(pgd)	free_pages((unsigned long)pgd, 2)
+#endif
+
 /*
  * need to get a 16k page for level 1
  */
@@ -27,7 +36,7 @@ pgd_t *pgd_alloc(struct mm_struct *mm)
 	pmd_t *new_pmd, *init_pmd;
 	pte_t *new_pte, *init_pte;
 
-	new_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL, 2);
+	new_pgd = __pgd_alloc();
 	if (!new_pgd)
 		goto no_pgd;
 
@@ -42,10 +51,25 @@ pgd_t *pgd_alloc(struct mm_struct *mm)
 
 	clean_dcache_area(new_pgd, PTRS_PER_PGD * sizeof(pgd_t));
 
+#ifdef CONFIG_ARM_LPAE
+	/*
+	 * Allocate PMD table for modules and pkmap mappings.
+	 */
+	new_pud = pud_alloc(mm, new_pgd + pgd_index(MODULES_VADDR),
+			    MODULES_VADDR);
+	if (!new_pud)
+		goto no_pud;
+
+	new_pmd = pmd_alloc(mm, new_pud, 0);
+	if (!new_pmd)
+		goto no_pmd;
+#endif
+
 	if (!vectors_high()) {
 		/*
 		 * On ARM, first page must always be allocated since it
-		 * contains the machine vectors.
+		 * contains the machine vectors. The vectors are always high
+		 * with LPAE.
 		 */
 		new_pud = pud_alloc(mm, new_pgd, 0);
 		if (!new_pud)
@@ -74,7 +98,7 @@ no_pte:
 no_pmd:
 	pud_free(mm, new_pud);
 no_pud:
-	free_pages((unsigned long)new_pgd, 2);
+	__pgd_free(new_pgd);
 no_pgd:
 	return NULL;
 }
@@ -111,5 +135,24 @@ no_pud:
 	pgd_clear(pgd);
 	pud_free(mm, pud);
 no_pgd:
-	free_pages((unsigned long) pgd_base, 2);
+#ifdef CONFIG_ARM_LPAE
+	/*
+	 * Free modules/pkmap or identity pmd tables.
+	 */
+	for (pgd = pgd_base; pgd < pgd_base + PTRS_PER_PGD; pgd++) {
+		if (pgd_none_or_clear_bad(pgd))
+			continue;
+		if (pgd_val(*pgd) & L_PGD_SWAPPER)
+			continue;
+		pud = pud_offset(pgd, 0);
+		if (pud_none_or_clear_bad(pud))
+			continue;
+		pmd = pmd_offset(pud, 0);
+		pud_clear(pud);
+		pmd_free(mm, pmd);
+		pgd_clear(pgd);
+		pud_free(mm, pud);
+	}
+#endif
+	__pgd_free(pgd_base);
 }
diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S
index 6746966..2349513 100644
--- a/arch/arm/mm/proc-arm1020.S
+++ b/arch/arm/mm/proc-arm1020.S
@@ -95,6 +95,7 @@ ENTRY(cpu_arm1020_proc_fin)
  * loc: location to jump to for soft reset
  */
 	.align	5
+	.pushsection	.idmap.text, "ax"
 ENTRY(cpu_arm1020_reset)
 	mov	ip, #0
 	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
@@ -107,6 +108,8 @@ ENTRY(cpu_arm1020_reset)
 	bic	ip, ip, #0x1100 		@ ...i...s........
 	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
 	mov	pc, r0
+ENDPROC(cpu_arm1020_reset)
+	.popsection
 
 /*
  * cpu_arm1020_do_idle()
diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
index 4251421..c244b06 100644
--- a/arch/arm/mm/proc-arm1020e.S
+++ b/arch/arm/mm/proc-arm1020e.S
@@ -95,6 +95,7 @@ ENTRY(cpu_arm1020e_proc_fin)
  * loc: location to jump to for soft reset
  */
 	.align	5
+	.pushsection	.idmap.text, "ax"
 ENTRY(cpu_arm1020e_reset)
 	mov	ip, #0
 	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
@@ -107,6 +108,8 @@ ENTRY(cpu_arm1020e_reset)
 	bic	ip, ip, #0x1100 		@ ...i...s........
 	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
 	mov	pc, r0
+ENDPROC(cpu_arm1020e_reset)
+	.popsection
 
 /*
  * cpu_arm1020e_do_idle()
diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S
index d283cf3..38fe22e 100644
--- a/arch/arm/mm/proc-arm1022.S
+++ b/arch/arm/mm/proc-arm1022.S
@@ -84,6 +84,7 @@ ENTRY(cpu_arm1022_proc_fin)
  * loc: location to jump to for soft reset
  */
 	.align	5
+	.pushsection	.idmap.text, "ax"
 ENTRY(cpu_arm1022_reset)
 	mov	ip, #0
 	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
@@ -96,6 +97,8 @@ ENTRY(cpu_arm1022_reset)
 	bic	ip, ip, #0x1100 		@ ...i...s........
 	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
 	mov	pc, r0
+ENDPROC(cpu_arm1022_reset)
+	.popsection
 
 /*
  * cpu_arm1022_do_idle()
diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S
index 678a1ce..3eb9c3c 100644
--- a/arch/arm/mm/proc-arm1026.S
+++ b/arch/arm/mm/proc-arm1026.S
@@ -84,6 +84,7 @@ ENTRY(cpu_arm1026_proc_fin)
  * loc: location to jump to for soft reset
  */
 	.align	5
+	.pushsection	.idmap.text, "ax"
 ENTRY(cpu_arm1026_reset)
 	mov	ip, #0
 	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
@@ -96,6 +97,8 @@ ENTRY(cpu_arm1026_reset)
 	bic	ip, ip, #0x1100 		@ ...i...s........
 	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
 	mov	pc, r0
+ENDPROC(cpu_arm1026_reset)
+	.popsection
 
 /*
  * cpu_arm1026_do_idle()
diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S
index e5b974c..4fbeb5b 100644
--- a/arch/arm/mm/proc-arm6_7.S
+++ b/arch/arm/mm/proc-arm6_7.S
@@ -225,6 +225,7 @@ ENTRY(cpu_arm7_set_pte_ext)
  * Params  : r0 = address to jump to
  * Notes   : This sets up everything for a reset
  */
+		.pushsection	.idmap.text, "ax"
 ENTRY(cpu_arm6_reset)
 ENTRY(cpu_arm7_reset)
 		mov	r1, #0
@@ -235,6 +236,9 @@ ENTRY(cpu_arm7_reset)
 		mov	r1, #0x30
 		mcr	p15, 0, r1, c1, c0, 0		@ turn off MMU etc
 		mov	pc, r0
+ENDPROC(cpu_arm6_reset)
+ENDPROC(cpu_arm7_reset)
+		.popsection
 
 		__CPUINIT
 
diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S
index 55f4e29..0ac908c 100644
--- a/arch/arm/mm/proc-arm720.S
+++ b/arch/arm/mm/proc-arm720.S
@@ -101,6 +101,7 @@ ENTRY(cpu_arm720_set_pte_ext)
  * Params  : r0 = address to jump to
  * Notes   : This sets up everything for a reset
  */
+		.pushsection	.idmap.text, "ax"
 ENTRY(cpu_arm720_reset)
 		mov	ip, #0
 		mcr	p15, 0, ip, c7, c7, 0		@ invalidate cache
@@ -112,6 +113,8 @@ ENTRY(cpu_arm720_reset)
 		bic	ip, ip, #0x2100			@ ..v....s........
 		mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
 		mov	pc, r0
+ENDPROC(cpu_arm720_reset)
+		.popsection
 
 	__CPUINIT
 
diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S
index 4506be3..dc5de5d 100644
--- a/arch/arm/mm/proc-arm740.S
+++ b/arch/arm/mm/proc-arm740.S
@@ -49,6 +49,7 @@ ENTRY(cpu_arm740_proc_fin)
  * Params  : r0 = address to jump to
  * Notes   : This sets up everything for a reset
  */
+	.pushsection	.idmap.text, "ax"
 ENTRY(cpu_arm740_reset)
 	mov	ip, #0
 	mcr	p15, 0, ip, c7, c0, 0		@ invalidate cache
@@ -56,6 +57,8 @@ ENTRY(cpu_arm740_reset)
 	bic	ip, ip, #0x0000000c		@ ............wc..
 	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
 	mov	pc, r0
+ENDPROC(cpu_arm740_reset)
+	.popsection
 
 	__CPUINIT
 
diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S
index 7e0e1fe..6ddea3e 100644
--- a/arch/arm/mm/proc-arm7tdmi.S
+++ b/arch/arm/mm/proc-arm7tdmi.S
@@ -45,8 +45,11 @@ ENTRY(cpu_arm7tdmi_proc_fin)
  * Params  : loc(r0)	address to jump to
  * Purpose : Sets up everything for a reset and jump to the location for soft reset.
  */
+		.pushsection	.idmap.text, "ax"
 ENTRY(cpu_arm7tdmi_reset)
 		mov	pc, r0
+ENDPROC(cpu_arm7tdmi_reset)
+		.popsection
 
 		__CPUINIT
 
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index 88fb3d9..cb941ae 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -85,6 +85,7 @@ ENTRY(cpu_arm920_proc_fin)
  * loc: location to jump to for soft reset
  */
 	.align	5
+	.pushsection	.idmap.text, "ax"
 ENTRY(cpu_arm920_reset)
 	mov	ip, #0
 	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
@@ -97,6 +98,8 @@ ENTRY(cpu_arm920_reset)
 	bic	ip, ip, #0x1100			@ ...i...s........
 	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
 	mov	pc, r0
+ENDPROC(cpu_arm920_reset)
+	.popsection
 
 /*
  * cpu_arm920_do_idle()
diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S
index 490e188..4ec0e07 100644
--- a/arch/arm/mm/proc-arm922.S
+++ b/arch/arm/mm/proc-arm922.S
@@ -87,6 +87,7 @@ ENTRY(cpu_arm922_proc_fin)
  * loc: location to jump to for soft reset
  */
 	.align	5
+	.pushsection	.idmap.text, "ax"
 ENTRY(cpu_arm922_reset)
 	mov	ip, #0
 	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
@@ -99,6 +100,8 @@ ENTRY(cpu_arm922_reset)
 	bic	ip, ip, #0x1100			@ ...i...s........
 	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
 	mov	pc, r0
+ENDPROC(cpu_arm922_reset)
+	.popsection
 
 /*
  * cpu_arm922_do_idle()
diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index 51d494b..9dccd9a 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -108,6 +108,7 @@ ENTRY(cpu_arm925_proc_fin)
  * loc: location to jump to for soft reset
  */
 	.align	5
+	.pushsection	.idmap.text, "ax"
 ENTRY(cpu_arm925_reset)
 	/* Send software reset to MPU and DSP */
 	mov	ip, #0xff000000
@@ -115,6 +116,8 @@ ENTRY(cpu_arm925_reset)
 	orr	ip, ip, #0x0000ce00
 	mov	r4, #1
 	strh	r4, [ip, #0x10]
+ENDPROC(cpu_arm925_reset)
+	.popsection
 
 	mov	ip, #0
 	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 9f8fd91..820259b 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -77,6 +77,7 @@ ENTRY(cpu_arm926_proc_fin)
  * loc: location to jump to for soft reset
  */
 	.align	5
+	.pushsection	.idmap.text, "ax"
 ENTRY(cpu_arm926_reset)
 	mov	ip, #0
 	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
@@ -89,6 +90,8 @@ ENTRY(cpu_arm926_reset)
 	bic	ip, ip, #0x1100			@ ...i...s........
 	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
 	mov	pc, r0
+ENDPROC(cpu_arm926_reset)
+	.popsection
 
 /*
  * cpu_arm926_do_idle()
diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S
index ac750d5..9fdc0a17 100644
--- a/arch/arm/mm/proc-arm940.S
+++ b/arch/arm/mm/proc-arm940.S
@@ -48,6 +48,7 @@ ENTRY(cpu_arm940_proc_fin)
  * Params  : r0 = address to jump to
  * Notes   : This sets up everything for a reset
  */
+	.pushsection	.idmap.text, "ax"
 ENTRY(cpu_arm940_reset)
 	mov	ip, #0
 	mcr	p15, 0, ip, c7, c5, 0		@ flush I cache
@@ -58,6 +59,8 @@ ENTRY(cpu_arm940_reset)
 	bic	ip, ip, #0x00001000		@ i-cache
 	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
 	mov	pc, r0
+ENDPROC(cpu_arm940_reset)
+	.popsection
 
 /*
  * cpu_arm940_do_idle()
diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S
index 683af3a..f684cfe 100644
--- a/arch/arm/mm/proc-arm946.S
+++ b/arch/arm/mm/proc-arm946.S
@@ -55,6 +55,7 @@ ENTRY(cpu_arm946_proc_fin)
  * Params  : r0 = address to jump to
  * Notes   : This sets up everything for a reset
  */
+	.pushsection	.idmap.text, "ax"
 ENTRY(cpu_arm946_reset)
 	mov	ip, #0
 	mcr	p15, 0, ip, c7, c5, 0		@ flush I cache
@@ -65,6 +66,8 @@ ENTRY(cpu_arm946_reset)
 	bic	ip, ip, #0x00001000		@ i-cache
 	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
 	mov	pc, r0
+ENDPROC(cpu_arm946_reset)
+	.popsection
 
 /*
  * cpu_arm946_do_idle()
diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S
index 2120f9e..8881391 100644
--- a/arch/arm/mm/proc-arm9tdmi.S
+++ b/arch/arm/mm/proc-arm9tdmi.S
@@ -45,8 +45,11 @@ ENTRY(cpu_arm9tdmi_proc_fin)
  * Params  : loc(r0)	address to jump to
  * Purpose : Sets up everything for a reset and jump to the location for soft reset.
  */
+		.pushsection	.idmap.text, "ax"
 ENTRY(cpu_arm9tdmi_reset)
 		mov	pc, r0
+ENDPROC(cpu_arm9tdmi_reset)
+		.popsection
 
 		__CPUINIT
 
diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S
index 4c7a571..272558a 100644
--- a/arch/arm/mm/proc-fa526.S
+++ b/arch/arm/mm/proc-fa526.S
@@ -57,6 +57,7 @@ ENTRY(cpu_fa526_proc_fin)
  * loc: location to jump to for soft reset
  */
 	.align	4
+	.pushsection	.idmap.text, "ax"
 ENTRY(cpu_fa526_reset)
 /* TODO: Use CP8 if possible... */
 	mov	ip, #0
@@ -73,6 +74,8 @@ ENTRY(cpu_fa526_reset)
 	nop
 	nop
 	mov	pc, r0
+ENDPROC(cpu_fa526_reset)
+	.popsection
 
 /*
  * cpu_fa526_do_idle()
diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S
index 8a6c2f7..ba3c500 100644
--- a/arch/arm/mm/proc-feroceon.S
+++ b/arch/arm/mm/proc-feroceon.S
@@ -98,6 +98,7 @@ ENTRY(cpu_feroceon_proc_fin)
  * loc: location to jump to for soft reset
  */
 	.align	5
+	.pushsection	.idmap.text, "ax"
 ENTRY(cpu_feroceon_reset)
 	mov	ip, #0
 	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
@@ -110,6 +111,8 @@ ENTRY(cpu_feroceon_reset)
 	bic	ip, ip, #0x1100			@ ...i...s........
 	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
 	mov	pc, r0
+ENDPROC(cpu_feroceon_reset)
+	.popsection
 
 /*
  * cpu_feroceon_do_idle()
diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S
index 307a4def..2d8ff3a 100644
--- a/arch/arm/mm/proc-macros.S
+++ b/arch/arm/mm/proc-macros.S
@@ -91,8 +91,9 @@
 #if L_PTE_SHARED != PTE_EXT_SHARED
 #error PTE shared bit mismatch
 #endif
-#if (L_PTE_XN+L_PTE_USER+L_PTE_RDONLY+L_PTE_DIRTY+L_PTE_YOUNG+\
-     L_PTE_FILE+L_PTE_PRESENT) > L_PTE_SHARED
+#if !defined (CONFIG_ARM_LPAE) && \
+	(L_PTE_XN+L_PTE_USER+L_PTE_RDONLY+L_PTE_DIRTY+L_PTE_YOUNG+\
+	 L_PTE_FILE+L_PTE_PRESENT) > L_PTE_SHARED
 #error Invalid Linux PTE bit settings
 #endif
 #endif	/* CONFIG_MMU */
diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S
index db52b0f..cdfedc5 100644
--- a/arch/arm/mm/proc-mohawk.S
+++ b/arch/arm/mm/proc-mohawk.S
@@ -69,6 +69,7 @@ ENTRY(cpu_mohawk_proc_fin)
  * (same as arm926)
  */
 	.align	5
+	.pushsection	.idmap.text, "ax"
 ENTRY(cpu_mohawk_reset)
 	mov	ip, #0
 	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
@@ -79,6 +80,8 @@ ENTRY(cpu_mohawk_reset)
 	bic	ip, ip, #0x1100			@ ...i...s........
 	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
 	mov	pc, r0
+ENDPROC(cpu_mohawk_reset)
+	.popsection
 
 /*
  * cpu_mohawk_do_idle()
diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S
index d50ada2..775d70f 100644
--- a/arch/arm/mm/proc-sa110.S
+++ b/arch/arm/mm/proc-sa110.S
@@ -62,6 +62,7 @@ ENTRY(cpu_sa110_proc_fin)
  * loc: location to jump to for soft reset
  */
 	.align	5
+	.pushsection	.idmap.text, "ax"
 ENTRY(cpu_sa110_reset)
 	mov	ip, #0
 	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
@@ -74,6 +75,8 @@ ENTRY(cpu_sa110_reset)
 	bic	ip, ip, #0x1100			@ ...i...s........
 	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
 	mov	pc, r0
+ENDPROC(cpu_sa110_reset)
+	.popsection
 
 /*
  * cpu_sa110_do_idle(type)
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index 7d91545..3aa0da1 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -70,6 +70,7 @@ ENTRY(cpu_sa1100_proc_fin)
  * loc: location to jump to for soft reset
  */
 	.align	5
+	.pushsection	.idmap.text, "ax"
 ENTRY(cpu_sa1100_reset)
 	mov	ip, #0
 	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
@@ -82,6 +83,8 @@ ENTRY(cpu_sa1100_reset)
 	bic	ip, ip, #0x1100			@ ...i...s........
 	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
 	mov	pc, r0
+ENDPROC(cpu_sa1100_reset)
+	.popsection
 
 /*
  * cpu_sa1100_do_idle(type)
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index d061d2f..5900cd5 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -55,6 +55,7 @@ ENTRY(cpu_v6_proc_fin)
  *	- loc   - location to jump to for soft reset
  */
 	.align	5
+	.pushsection	.idmap.text, "ax"
 ENTRY(cpu_v6_reset)
 	mrc	p15, 0, r1, c1, c0, 0		@ ctrl register
 	bic	r1, r1, #0x1			@ ...............m
@@ -62,6 +63,8 @@ ENTRY(cpu_v6_reset)
 	mov	r1, #0
 	mcr	p15, 0, r1, c7, c5, 4		@ ISB
 	mov	pc, r0
+ENDPROC(cpu_v6_reset)
+	.popsection
 
 /*
  *	cpu_v6_do_idle()
diff --git a/arch/arm/mm/proc-v7-2level.S b/arch/arm/mm/proc-v7-2level.S
new file mode 100644
index 0000000..3a4b3e7
--- /dev/null
+++ b/arch/arm/mm/proc-v7-2level.S
@@ -0,0 +1,171 @@
+/*
+ * arch/arm/mm/proc-v7-2level.S
+ *
+ * Copyright (C) 2001 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define TTB_S		(1 << 1)
+#define TTB_RGN_NC	(0 << 3)
+#define TTB_RGN_OC_WBWA	(1 << 3)
+#define TTB_RGN_OC_WT	(2 << 3)
+#define TTB_RGN_OC_WB	(3 << 3)
+#define TTB_NOS		(1 << 5)
+#define TTB_IRGN_NC	((0 << 0) | (0 << 6))
+#define TTB_IRGN_WBWA	((0 << 0) | (1 << 6))
+#define TTB_IRGN_WT	((1 << 0) | (0 << 6))
+#define TTB_IRGN_WB	((1 << 0) | (1 << 6))
+
+/* PTWs cacheable, inner WB not shareable, outer WB not shareable */
+#define TTB_FLAGS_UP	TTB_IRGN_WB|TTB_RGN_OC_WB
+#define PMD_FLAGS_UP	PMD_SECT_WB
+
+/* PTWs cacheable, inner WBWA shareable, outer WBWA not shareable */
+#define TTB_FLAGS_SMP	TTB_IRGN_WBWA|TTB_S|TTB_NOS|TTB_RGN_OC_WBWA
+#define PMD_FLAGS_SMP	PMD_SECT_WBWA|PMD_SECT_S
+
+/*
+ *	cpu_v7_switch_mm(pgd_phys, tsk)
+ *
+ *	Set the translation table base pointer to be pgd_phys
+ *
+ *	- pgd_phys - physical address of new TTB
+ *
+ *	It is assumed that:
+ *	- we are not using split page tables
+ */
+ENTRY(cpu_v7_switch_mm)
+#ifdef CONFIG_MMU
+	mov	r2, #0
+	ldr	r1, [r1, #MM_CONTEXT_ID]	@ get mm->context.id
+	ALT_SMP(orr	r0, r0, #TTB_FLAGS_SMP)
+	ALT_UP(orr	r0, r0, #TTB_FLAGS_UP)
+#ifdef CONFIG_ARM_ERRATA_430973
+	mcr	p15, 0, r2, c7, c5, 6		@ flush BTAC/BTB
+#endif
+#ifdef CONFIG_ARM_ERRATA_754322
+	dsb
+#endif
+	mcr	p15, 0, r2, c13, c0, 1		@ set reserved context ID
+	isb
+1:	mcr	p15, 0, r0, c2, c0, 0		@ set TTB 0
+	isb
+#ifdef CONFIG_ARM_ERRATA_754322
+	dsb
+#endif
+	mcr	p15, 0, r1, c13, c0, 1		@ set context ID
+	isb
+#endif
+	mov	pc, lr
+ENDPROC(cpu_v7_switch_mm)
+
+/*
+ *	cpu_v7_set_pte_ext(ptep, pte)
+ *
+ *	Set a level 2 translation table entry.
+ *
+ *	- ptep  - pointer to level 2 translation table entry
+ *		  (hardware version is stored at +2048 bytes)
+ *	- pte   - PTE value to store
+ *	- ext	- value for extended PTE bits
+ */
+ENTRY(cpu_v7_set_pte_ext)
+#ifdef CONFIG_MMU
+	str	r1, [r0]			@ linux version
+
+	bic	r3, r1, #0x000003f0
+	bic	r3, r3, #PTE_TYPE_MASK
+	orr	r3, r3, r2
+	orr	r3, r3, #PTE_EXT_AP0 | 2
+
+	tst	r1, #1 << 4
+	orrne	r3, r3, #PTE_EXT_TEX(1)
+
+	eor	r1, r1, #L_PTE_DIRTY
+	tst	r1, #L_PTE_RDONLY | L_PTE_DIRTY
+	orrne	r3, r3, #PTE_EXT_APX
+
+	tst	r1, #L_PTE_USER
+	orrne	r3, r3, #PTE_EXT_AP1
+#ifdef CONFIG_CPU_USE_DOMAINS
+	@ allow kernel read/write access to read-only user pages
+	tstne	r3, #PTE_EXT_APX
+	bicne	r3, r3, #PTE_EXT_APX | PTE_EXT_AP0
+#endif
+
+	tst	r1, #L_PTE_XN
+	orrne	r3, r3, #PTE_EXT_XN
+
+	tst	r1, #L_PTE_YOUNG
+	tstne	r1, #L_PTE_PRESENT
+	moveq	r3, #0
+
+ ARM(	str	r3, [r0, #2048]! )
+ THUMB(	add	r0, r0, #2048 )
+ THUMB(	str	r3, [r0] )
+	mcr	p15, 0, r0, c7, c10, 1		@ flush_pte
+#endif
+	mov	pc, lr
+ENDPROC(cpu_v7_set_pte_ext)
+
+	/*
+	 * Memory region attributes with SCTLR.TRE=1
+	 *
+	 *   n = TEX[0],C,B
+	 *   TR = PRRR[2n+1:2n]		- memory type
+	 *   IR = NMRR[2n+1:2n]		- inner cacheable property
+	 *   OR = NMRR[2n+17:2n+16]	- outer cacheable property
+	 *
+	 *			n	TR	IR	OR
+	 *   UNCACHED		000	00
+	 *   BUFFERABLE		001	10	00	00
+	 *   WRITETHROUGH	010	10	10	10
+	 *   WRITEBACK		011	10	11	11
+	 *   reserved		110
+	 *   WRITEALLOC		111	10	01	01
+	 *   DEV_SHARED		100	01
+	 *   DEV_NONSHARED	100	01
+	 *   DEV_WC		001	10
+	 *   DEV_CACHED		011	10
+	 *
+	 * Other attributes:
+	 *
+	 *   DS0 = PRRR[16] = 0		- device shareable property
+	 *   DS1 = PRRR[17] = 1		- device shareable property
+	 *   NS0 = PRRR[18] = 0		- normal shareable property
+	 *   NS1 = PRRR[19] = 1		- normal shareable property
+	 *   NOS = PRRR[24+n] = 1	- not outer shareable
+	 */
+.equ	PRRR,	0xff0a81a8
+.equ	NMRR,	0x40e040e0
+
+	/*
+	 * Macro for setting up the TTBRx and TTBCR registers.
+	 * - \ttb0 and \ttb1 updated with the corresponding flags.
+	 */
+	.macro	v7_ttb_setup, zero, ttbr0, ttbr1, tmp
+	mcr	p15, 0, \zero, c2, c0, 2	@ TTB control register
+	ALT_SMP(orr	\ttbr0, \ttbr0, #TTB_FLAGS_SMP)
+	ALT_UP(orr	\ttbr0, \ttbr0, #TTB_FLAGS_UP)
+	ALT_SMP(orr	\ttbr1, \ttbr1, #TTB_FLAGS_SMP)
+	ALT_UP(orr	\ttbr1, \ttbr1, #TTB_FLAGS_UP)
+	mcr	p15, 0, \ttbr1, c2, c0, 1	@ load TTB1
+	.endm
+
+	__CPUINIT
+
+	/*   AT
+	 *  TFR   EV X F   I D LR    S
+	 * .EEE ..EE PUI. .T.T 4RVI ZWRS BLDP WCAM
+	 * rxxx rrxx xxx0 0101 xxxx xxxx x111 xxxx < forced
+	 *    1    0 110       0011 1100 .111 1101 < we want
+	 */
+	.align	2
+	.type	v7_crval, #object
+v7_crval:
+	crval	clear=0x0120c302, mmuset=0x10c03c7d, ucset=0x00c01c7c
+
+	.previous
diff --git a/arch/arm/mm/proc-v7-3level.S b/arch/arm/mm/proc-v7-3level.S
new file mode 100644
index 0000000..8de0f1d
--- /dev/null
+++ b/arch/arm/mm/proc-v7-3level.S
@@ -0,0 +1,150 @@
+/*
+ * arch/arm/mm/proc-v7-3level.S
+ *
+ * Copyright (C) 2001 Deep Blue Solutions Ltd.
+ * Copyright (C) 2011 ARM Ltd.
+ * Author: Catalin Marinas <catalin.marinas@arm.com>
+ *   based on arch/arm/mm/proc-v7-2level.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#define TTB_IRGN_NC	(0 << 8)
+#define TTB_IRGN_WBWA	(1 << 8)
+#define TTB_IRGN_WT	(2 << 8)
+#define TTB_IRGN_WB	(3 << 8)
+#define TTB_RGN_NC	(0 << 10)
+#define TTB_RGN_OC_WBWA	(1 << 10)
+#define TTB_RGN_OC_WT	(2 << 10)
+#define TTB_RGN_OC_WB	(3 << 10)
+#define TTB_S		(3 << 12)
+#define TTB_EAE		(1 << 31)
+
+/* PTWs cacheable, inner WB not shareable, outer WB not shareable */
+#define TTB_FLAGS_UP	(TTB_IRGN_WB|TTB_RGN_OC_WB)
+#define PMD_FLAGS_UP	(PMD_SECT_WB)
+
+/* PTWs cacheable, inner WBWA shareable, outer WBWA not shareable */
+#define TTB_FLAGS_SMP	(TTB_IRGN_WBWA|TTB_S|TTB_RGN_OC_WBWA)
+#define PMD_FLAGS_SMP	(PMD_SECT_WBWA|PMD_SECT_S)
+
+/*
+ * cpu_v7_switch_mm(pgd_phys, tsk)
+ *
+ * Set the translation table base pointer to be pgd_phys (physical address of
+ * the new TTB).
+ */
+ENTRY(cpu_v7_switch_mm)
+#ifdef CONFIG_MMU
+	ldr	r1, [r1, #MM_CONTEXT_ID]	@ get mm->context.id
+	and	r3, r1, #0xff
+	mov	r3, r3, lsl #(48 - 32)		@ ASID
+	mcrr	p15, 0, r0, r3, c2		@ set TTB 0
+	isb
+#endif
+	mov	pc, lr
+ENDPROC(cpu_v7_switch_mm)
+
+/*
+ * cpu_v7_set_pte_ext(ptep, pte)
+ *
+ * Set a level 2 translation table entry.
+ * - ptep - pointer to level 3 translation table entry
+ * - pte - PTE value to store (64-bit in r2 and r3)
+ */
+ENTRY(cpu_v7_set_pte_ext)
+#ifdef CONFIG_MMU
+	tst	r2, #L_PTE_PRESENT
+	beq	1f
+	tst	r3, #1 << (55 - 32)		@ L_PTE_DIRTY
+	orreq	r2, #L_PTE_RDONLY
+1:	strd	r2, r3, [r0]
+	mcr	p15, 0, r0, c7, c10, 1		@ flush_pte
+#endif
+	mov	pc, lr
+ENDPROC(cpu_v7_set_pte_ext)
+
+	/*
+	 * Memory region attributes for LPAE (defined in pgtable-3level.h):
+	 *
+	 *   n = AttrIndx[2:0]
+	 *
+	 *			n	MAIR
+	 *   UNCACHED		000	00000000
+	 *   BUFFERABLE		001	01000100
+	 *   DEV_WC		001	01000100
+	 *   WRITETHROUGH	010	10101010
+	 *   WRITEBACK		011	11101110
+	 *   DEV_CACHED		011	11101110
+	 *   DEV_SHARED		100	00000100
+	 *   DEV_NONSHARED	100	00000100
+	 *   unused		101
+	 *   unused		110
+	 *   WRITEALLOC		111	11111111
+	 */
+.equ	PRRR,	0xeeaa4400			@ MAIR0
+.equ	NMRR,	0xff000004			@ MAIR1
+
+	/*
+	 * Macro for setting up the TTBRx and TTBCR registers.
+	 * - \ttbr1 updated.
+	 */
+	.macro	v7_ttb_setup, zero, ttbr0, ttbr1, tmp
+	ldr	\tmp, =swapper_pg_dir		@ swapper_pg_dir virtual address
+	cmp	\ttbr1, \tmp			@ PHYS_OFFSET > PAGE_OFFSET? (branch below)
+	mrc	p15, 0, \tmp, c2, c0, 2		@ TTB control register
+	orr	\tmp, \tmp, #TTB_EAE
+	ALT_SMP(orr	\tmp, \tmp, #TTB_FLAGS_SMP)
+	ALT_UP(orr	\tmp, \tmp, #TTB_FLAGS_UP)
+	ALT_SMP(orr	\tmp, \tmp, #TTB_FLAGS_SMP << 16)
+	ALT_UP(orr	\tmp, \tmp, #TTB_FLAGS_UP << 16)
+	/*
+	 * TTBR0/TTBR1 split (PAGE_OFFSET):
+	 *   0x40000000: T0SZ = 2, T1SZ = 0 (not used)
+	 *   0x80000000: T0SZ = 0, T1SZ = 1
+	 *   0xc0000000: T0SZ = 0, T1SZ = 2
+	 *
+	 * Only use this feature if PHYS_OFFSET <= PAGE_OFFSET, otherwise
+	 * booting secondary CPUs would end up using TTBR1 for the identity
+	 * mapping set up in TTBR0.
+	 */
+	bhi	9001f				@ PHYS_OFFSET > PAGE_OFFSET?
+	orr	\tmp, \tmp, #(((PAGE_OFFSET >> 30) - 1) << 16) @ TTBCR.T1SZ
+#if defined CONFIG_VMSPLIT_2G
+	/* PAGE_OFFSET == 0x80000000, T1SZ == 1 */
+	add	\ttbr1, \ttbr1, #1 << 4		@ skip two L1 entries
+#elif defined CONFIG_VMSPLIT_3G
+	/* PAGE_OFFSET == 0xc0000000, T1SZ == 2 */
+	add	\ttbr1, \ttbr1, #4096 * (1 + 3)	@ only L2 used, skip pgd+3*pmd
+#endif
+	/* CONFIG_VMSPLIT_1G does not need TTBR1 adjustment */
+9001:	mcr	p15, 0, \tmp, c2, c0, 2		@ TTB control register
+	mcrr	p15, 1, \ttbr1, \zero, c2	@ load TTBR1
+	.endm
+
+	__CPUINIT
+
+	/*
+	 *   AT
+	 *  TFR   EV X F   IHD LR    S
+	 * .EEE ..EE PUI. .TAT 4RVI ZWRS BLDP WCAM
+	 * rxxx rrxx xxx0 0101 xxxx xxxx x111 xxxx < forced
+	 *   11    0 110    1  0011 1100 .111 1101 < we want
+	 */
+	.align	2
+	.type	v7_crval, #object
+v7_crval:
+	crval	clear=0x0120c302, mmuset=0x30c23c7d, ucset=0x00c01c7c
+
+	.previous
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 2c559ac..7e9b5bf 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -19,24 +19,11 @@
 
 #include "proc-macros.S"
 
-#define TTB_S		(1 << 1)
-#define TTB_RGN_NC	(0 << 3)
-#define TTB_RGN_OC_WBWA	(1 << 3)
-#define TTB_RGN_OC_WT	(2 << 3)
-#define TTB_RGN_OC_WB	(3 << 3)
-#define TTB_NOS		(1 << 5)
-#define TTB_IRGN_NC	((0 << 0) | (0 << 6))
-#define TTB_IRGN_WBWA	((0 << 0) | (1 << 6))
-#define TTB_IRGN_WT	((1 << 0) | (0 << 6))
-#define TTB_IRGN_WB	((1 << 0) | (1 << 6))
-
-/* PTWs cacheable, inner WB not shareable, outer WB not shareable */
-#define TTB_FLAGS_UP	TTB_IRGN_WB|TTB_RGN_OC_WB
-#define PMD_FLAGS_UP	PMD_SECT_WB
-
-/* PTWs cacheable, inner WBWA shareable, outer WBWA not shareable */
-#define TTB_FLAGS_SMP	TTB_IRGN_WBWA|TTB_S|TTB_NOS|TTB_RGN_OC_WBWA
-#define PMD_FLAGS_SMP	PMD_SECT_WBWA|PMD_SECT_S
+#ifdef CONFIG_ARM_LPAE
+#include "proc-v7-3level.S"
+#else
+#include "proc-v7-2level.S"
+#endif
 
 ENTRY(cpu_v7_proc_init)
 	mov	pc, lr
@@ -63,6 +50,7 @@ ENDPROC(cpu_v7_proc_fin)
  *      caches disabled.
  */
 	.align	5
+	.pushsection	.idmap.text, "ax"
 ENTRY(cpu_v7_reset)
 	mrc	p15, 0, r1, c1, c0, 0		@ ctrl register
 	bic	r1, r1, #0x1			@ ...............m
@@ -71,6 +59,7 @@ ENTRY(cpu_v7_reset)
 	isb
 	mov	pc, r0
 ENDPROC(cpu_v7_reset)
+	.popsection
 
 /*
  *	cpu_v7_do_idle()
@@ -97,127 +86,12 @@ ENTRY(cpu_v7_dcache_clean_area)
 	mov	pc, lr
 ENDPROC(cpu_v7_dcache_clean_area)
 
-/*
- *	cpu_v7_switch_mm(pgd_phys, tsk)
- *
- *	Set the translation table base pointer to be pgd_phys
- *
- *	- pgd_phys - physical address of new TTB
- *
- *	It is assumed that:
- *	- we are not using split page tables
- */
-ENTRY(cpu_v7_switch_mm)
-#ifdef CONFIG_MMU
-	mov	r2, #0
-	ldr	r1, [r1, #MM_CONTEXT_ID]	@ get mm->context.id
-	ALT_SMP(orr	r0, r0, #TTB_FLAGS_SMP)
-	ALT_UP(orr	r0, r0, #TTB_FLAGS_UP)
-#ifdef CONFIG_ARM_ERRATA_430973
-	mcr	p15, 0, r2, c7, c5, 6		@ flush BTAC/BTB
-#endif
-#ifdef CONFIG_ARM_ERRATA_754322
-	dsb
-#endif
-	mcr	p15, 0, r2, c13, c0, 1		@ set reserved context ID
-	isb
-1:	mcr	p15, 0, r0, c2, c0, 0		@ set TTB 0
-	isb
-#ifdef CONFIG_ARM_ERRATA_754322
-	dsb
-#endif
-	mcr	p15, 0, r1, c13, c0, 1		@ set context ID
-	isb
-#endif
-	mov	pc, lr
-ENDPROC(cpu_v7_switch_mm)
-
-/*
- *	cpu_v7_set_pte_ext(ptep, pte)
- *
- *	Set a level 2 translation table entry.
- *
- *	- ptep  - pointer to level 2 translation table entry
- *		  (hardware version is stored at +2048 bytes)
- *	- pte   - PTE value to store
- *	- ext	- value for extended PTE bits
- */
-ENTRY(cpu_v7_set_pte_ext)
-#ifdef CONFIG_MMU
-	str	r1, [r0]			@ linux version
-
-	bic	r3, r1, #0x000003f0
-	bic	r3, r3, #PTE_TYPE_MASK
-	orr	r3, r3, r2
-	orr	r3, r3, #PTE_EXT_AP0 | 2
-
-	tst	r1, #1 << 4
-	orrne	r3, r3, #PTE_EXT_TEX(1)
-
-	eor	r1, r1, #L_PTE_DIRTY
-	tst	r1, #L_PTE_RDONLY | L_PTE_DIRTY
-	orrne	r3, r3, #PTE_EXT_APX
-
-	tst	r1, #L_PTE_USER
-	orrne	r3, r3, #PTE_EXT_AP1
-#ifdef CONFIG_CPU_USE_DOMAINS
-	@ allow kernel read/write access to read-only user pages
-	tstne	r3, #PTE_EXT_APX
-	bicne	r3, r3, #PTE_EXT_APX | PTE_EXT_AP0
-#endif
-
-	tst	r1, #L_PTE_XN
-	orrne	r3, r3, #PTE_EXT_XN
-
-	tst	r1, #L_PTE_YOUNG
-	tstne	r1, #L_PTE_PRESENT
-	moveq	r3, #0
-
- ARM(	str	r3, [r0, #2048]! )
- THUMB(	add	r0, r0, #2048 )
- THUMB(	str	r3, [r0] )
-	mcr	p15, 0, r0, c7, c10, 1		@ flush_pte
-#endif
-	mov	pc, lr
-ENDPROC(cpu_v7_set_pte_ext)
-
 	string	cpu_v7_name, "ARMv7 Processor"
 	.align
 
-	/*
-	 * Memory region attributes with SCTLR.TRE=1
-	 *
-	 *   n = TEX[0],C,B
-	 *   TR = PRRR[2n+1:2n]		- memory type
-	 *   IR = NMRR[2n+1:2n]		- inner cacheable property
-	 *   OR = NMRR[2n+17:2n+16]	- outer cacheable property
-	 *
-	 *			n	TR	IR	OR
-	 *   UNCACHED		000	00
-	 *   BUFFERABLE		001	10	00	00
-	 *   WRITETHROUGH	010	10	10	10
-	 *   WRITEBACK		011	10	11	11
-	 *   reserved		110
-	 *   WRITEALLOC		111	10	01	01
-	 *   DEV_SHARED		100	01
-	 *   DEV_NONSHARED	100	01
-	 *   DEV_WC		001	10
-	 *   DEV_CACHED		011	10
-	 *
-	 * Other attributes:
-	 *
-	 *   DS0 = PRRR[16] = 0		- device shareable property
-	 *   DS1 = PRRR[17] = 1		- device shareable property
-	 *   NS0 = PRRR[18] = 0		- normal shareable property
-	 *   NS1 = PRRR[19] = 1		- normal shareable property
-	 *   NOS = PRRR[24+n] = 1	- not outer shareable
-	 */
-.equ	PRRR,	0xff0a81a8
-.equ	NMRR,	0x40e040e0
-
 /* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */
 .globl	cpu_v7_suspend_size
-.equ	cpu_v7_suspend_size, 4 * 7
+.equ	cpu_v7_suspend_size, 4 * 8
 #ifdef CONFIG_ARM_CPU_SUSPEND
 ENTRY(cpu_v7_do_suspend)
 	stmfd	sp!, {r4 - r10, lr}
@@ -226,10 +100,11 @@ ENTRY(cpu_v7_do_suspend)
 	stmia	r0!, {r4 - r5}
 	mrc	p15, 0, r6, c3, c0, 0	@ Domain ID
 	mrc	p15, 0, r7, c2, c0, 1	@ TTB 1
+	mrc	p15, 0, r11, c2, c0, 2	@ TTB control register
 	mrc	p15, 0, r8, c1, c0, 0	@ Control register
 	mrc	p15, 0, r9, c1, c0, 1	@ Auxiliary control register
 	mrc	p15, 0, r10, c1, c0, 2	@ Co-processor access control
-	stmia	r0, {r6 - r10}
+	stmia	r0, {r6 - r11}
 	ldmfd	sp!, {r4 - r10, pc}
 ENDPROC(cpu_v7_do_suspend)
 
@@ -241,13 +116,15 @@ ENTRY(cpu_v7_do_resume)
 	ldmia	r0!, {r4 - r5}
 	mcr	p15, 0, r4, c13, c0, 0	@ FCSE/PID
 	mcr	p15, 0, r5, c13, c0, 3	@ User r/o thread ID
-	ldmia	r0, {r6 - r10}
+	ldmia	r0, {r6 - r11}
 	mcr	p15, 0, r6, c3, c0, 0	@ Domain ID
+#ifndef CONFIG_ARM_LPAE
 	ALT_SMP(orr	r1, r1, #TTB_FLAGS_SMP)
 	ALT_UP(orr	r1, r1, #TTB_FLAGS_UP)
+#endif
 	mcr	p15, 0, r1, c2, c0, 0	@ TTB 0
 	mcr	p15, 0, r7, c2, c0, 1	@ TTB 1
-	mcr	p15, 0, ip, c2, c0, 2	@ TTB control register
+	mcr	p15, 0, r11, c2, c0, 2	@ TTB control register
 	mrc	p15, 0, r4, c1, c0, 1	@ Read Auxiliary control register
 	teq	r4, r9			@ Is it already set?
 	mcrne	p15, 0, r9, c1, c0, 1	@ No, so write it
@@ -284,6 +161,7 @@ __v7_ca5mp_setup:
 __v7_ca9mp_setup:
 	mov	r10, #(1 << 0)			@ TLB ops broadcasting
 	b	1f
+__v7_ca7mp_setup:
 __v7_ca15mp_setup:
 	mov	r10, #0
 1:
@@ -363,11 +241,13 @@ __v7_setup:
 	orreq	r10, r10, #1 << 6		@ set bit #6
 	mcreq	p15, 0, r10, c15, c0, 1		@ write diagnostic register
 #endif
-#ifdef CONFIG_ARM_ERRATA_751472
-	cmp	r6, #0x30			@ present prior to r3p0
+#if defined(CONFIG_ARM_ERRATA_751472) && defined(CONFIG_SMP)
+	ALT_SMP(cmp r6, #0x30)			@ present prior to r3p0
+	ALT_UP_B(1f)
 	mrclt	p15, 0, r10, c15, c0, 1		@ read diagnostic register
 	orrlt	r10, r10, #1 << 11		@ set bit #11
 	mcrlt	p15, 0, r10, c15, c0, 1		@ write diagnostic register
+1:
 #endif
 
 3:	mov	r10, #0
@@ -377,12 +257,7 @@ __v7_setup:
 	dsb
 #ifdef CONFIG_MMU
 	mcr	p15, 0, r10, c8, c7, 0		@ invalidate I + D TLBs
-	mcr	p15, 0, r10, c2, c0, 2		@ TTB control register
-	ALT_SMP(orr	r4, r4, #TTB_FLAGS_SMP)
-	ALT_UP(orr	r4, r4, #TTB_FLAGS_UP)
-	ALT_SMP(orr	r8, r8, #TTB_FLAGS_SMP)
-	ALT_UP(orr	r8, r8, #TTB_FLAGS_UP)
-	mcr	p15, 0, r8, c2, c0, 1		@ load TTB1
+	v7_ttb_setup r10, r4, r8, r5		@ TTBCR, TTBRx setup
 	ldr	r5, =PRRR			@ PRRR
 	ldr	r6, =NMRR			@ NMRR
 	mcr	p15, 0, r5, c10, c2, 0		@ write PRRR
@@ -404,16 +279,7 @@ __v7_setup:
 	mov	pc, lr				@ return to head.S:__ret
 ENDPROC(__v7_setup)
 
-	/*   AT
-	 *  TFR   EV X F   I D LR    S
-	 * .EEE ..EE PUI. .T.T 4RVI ZWRS BLDP WCAM
-	 * rxxx rrxx xxx0 0101 xxxx xxxx x111 xxxx < forced
-	 *    1    0 110       0011 1100 .111 1101 < we want
-	 */
-	.type	v7_crval, #object
-v7_crval:
-	crval	clear=0x0120c302, mmuset=0x10c03c7d, ucset=0x00c01c7c
-
+	.align	2
 __v7_setup_stack:
 	.space	4 * 11				@ 11 registers
 
@@ -435,11 +301,11 @@ __v7_setup_stack:
 	 */
 .macro __v7_proc initfunc, mm_mmuflags = 0, io_mmuflags = 0, hwcaps = 0
 	ALT_SMP(.long	PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | \
-			PMD_FLAGS_SMP | \mm_mmuflags)
+			PMD_SECT_AF | PMD_FLAGS_SMP | \mm_mmuflags)
 	ALT_UP(.long	PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | \
-			PMD_FLAGS_UP | \mm_mmuflags)
-	.long	PMD_TYPE_SECT | PMD_SECT_XN | PMD_SECT_AP_WRITE | \
-		PMD_SECT_AP_READ | \io_mmuflags
+			PMD_SECT_AF | PMD_FLAGS_UP | \mm_mmuflags)
+	.long	PMD_TYPE_SECT | PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ | PMD_SECT_AF | \io_mmuflags
 	W(b)	\initfunc
 	.long	cpu_arch_name
 	.long	cpu_elf_name
@@ -452,6 +318,7 @@ __v7_setup_stack:
 	.long	v7_cache_fns
 .endm
 
+#ifndef CONFIG_ARM_LPAE
 	/*
 	 * ARM Ltd. Cortex A5 processor.
 	 */
@@ -463,6 +330,16 @@ __v7_ca5mp_proc_info:
 	.size	__v7_ca5mp_proc_info, . - __v7_ca5mp_proc_info
 
 	/*
+	 * ARM Ltd. Cortex A7 processor.
+	 */
+	.type	__v7_ca7mp_proc_info, #object
+__v7_ca7mp_proc_info:
+	.long	0x410fc070
+	.long	0xff0ffff0
+	__v7_proc __v7_ca7mp_setup, hwcaps = HWCAP_IDIV
+	.size	__v7_ca7mp_proc_info, . - __v7_ca7mp_proc_info
+
+	/*
 	 * ARM Ltd. Cortex A9 processor.
 	 */
 	.type   __v7_ca9mp_proc_info, #object
@@ -471,6 +348,7 @@ __v7_ca9mp_proc_info:
 	.long	0xff0ffff0
 	__v7_proc __v7_ca9mp_setup
 	.size	__v7_ca9mp_proc_info, . - __v7_ca9mp_proc_info
+#endif	/* CONFIG_ARM_LPAE */
 
 	/*
 	 * ARM Ltd. Cortex A15 processor.
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index abf0507..b0d5786 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -105,6 +105,7 @@ ENTRY(cpu_xsc3_proc_fin)
  * loc: location to jump to for soft reset
  */
 	.align	5
+	.pushsection	.idmap.text, "ax"
 ENTRY(cpu_xsc3_reset)
 	mov	r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
 	msr	cpsr_c, r1			@ reset CPSR
@@ -119,6 +120,8 @@ ENTRY(cpu_xsc3_reset)
 	@ already containing those two last instructions to survive.
 	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I and D TLBs
 	mov	pc, r0
+ENDPROC(cpu_xsc3_reset)
+	.popsection
 
 /*
  * cpu_xsc3_do_idle()
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index 3277904..4ffebaa 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -142,6 +142,7 @@ ENTRY(cpu_xscale_proc_fin)
  * Beware PXA270 erratum E7.
  */
 	.align	5
+	.pushsection	.idmap.text, "ax"
 ENTRY(cpu_xscale_reset)
 	mov	r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
 	msr	cpsr_c, r1			@ reset CPSR
@@ -160,6 +161,8 @@ ENTRY(cpu_xscale_reset)
 	@ already containing those two last instructions to survive.
 	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
 	mov	pc, r0
+ENDPROC(cpu_xscale_reset)
+	.popsection
 
 /*
  * cpu_xscale_do_idle()
diff --git a/arch/arm/nwfpe/entry.S b/arch/arm/nwfpe/entry.S
index cafa183..d18dde9 100644
--- a/arch/arm/nwfpe/entry.S
+++ b/arch/arm/nwfpe/entry.S
@@ -20,6 +20,8 @@
     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */
 
+#include <asm/opcodes.h>
+
 /* This is the kernel's entry point into the floating point emulator.
 It is called from the kernel with code similar to this:
 
@@ -81,11 +83,11 @@ nwfpe_enter:
 	mov	r6, r0			@ save the opcode
 emulate:
 	ldr	r1, [sp, #S_PSR]	@ fetch the PSR
-	bl	checkCondition		@ check the condition
-	cmp	r0, #0			@ r0 = 0 ==> condition failed
+	bl	arm_check_condition	@ check the condition
+	cmp	r0, #ARM_OPCODE_CONDTEST_PASS	@ condition passed?
 
 	@ if condition code failed to match, next insn
-	beq	next			@ get the next instruction;
+	bne	next			@ get the next instruction;
 
 	mov	r0, r6			@ prepare for EmulateAll()
 	bl	EmulateAll		@ emulate the instruction
diff --git a/arch/arm/nwfpe/fpopcode.c b/arch/arm/nwfpe/fpopcode.c
index 922b811..ff983467 100644
--- a/arch/arm/nwfpe/fpopcode.c
+++ b/arch/arm/nwfpe/fpopcode.c
@@ -61,29 +61,3 @@ const float32 float32Constant[] = {
 	0x41200000		/* single 10.0 */
 };
 
-/* condition code lookup table
- index into the table is test code: EQ, NE, ... LT, GT, AL, NV
- bit position in short is condition code: NZCV */
-static const unsigned short aCC[16] = {
-	0xF0F0,			// EQ == Z set
-	0x0F0F,			// NE
-	0xCCCC,			// CS == C set
-	0x3333,			// CC
-	0xFF00,			// MI == N set
-	0x00FF,			// PL
-	0xAAAA,			// VS == V set
-	0x5555,			// VC
-	0x0C0C,			// HI == C set && Z clear
-	0xF3F3,			// LS == C clear || Z set
-	0xAA55,			// GE == (N==V)
-	0x55AA,			// LT == (N!=V)
-	0x0A05,			// GT == (!Z && (N==V))
-	0xF5FA,			// LE == (Z || (N!=V))
-	0xFFFF,			// AL always
-	0			// NV
-};
-
-unsigned int checkCondition(const unsigned int opcode, const unsigned int ccodes)
-{
-	return (aCC[opcode >> 28] >> (ccodes >> 28)) & 1;
-}
diff --git a/arch/arm/nwfpe/fpopcode.h b/arch/arm/nwfpe/fpopcode.h
index 786e4c9..78f02db 100644
--- a/arch/arm/nwfpe/fpopcode.h
+++ b/arch/arm/nwfpe/fpopcode.h
@@ -475,9 +475,6 @@ static inline unsigned int getDestinationSize(const unsigned int opcode)
 	return (nRc);
 }
 
-extern unsigned int checkCondition(const unsigned int opcode,
-				   const unsigned int ccodes);
-
 extern const float64 float64Constant[];
 extern const float32 float32Constant[];
 
diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c
index c074e66..4e0a371 100644
--- a/arch/arm/oprofile/common.c
+++ b/arch/arm/oprofile/common.c
@@ -116,7 +116,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
 	return oprofile_perf_init(ops);
 }
 
-void __exit oprofile_arch_exit(void)
+void oprofile_arch_exit(void)
 {
 	oprofile_perf_exit();
 }
diff --git a/arch/arm/plat-iop/Makefile b/arch/arm/plat-iop/Makefile
index 69b09c1..a99dc15 100644
--- a/arch/arm/plat-iop/Makefile
+++ b/arch/arm/plat-iop/Makefile
@@ -10,10 +10,10 @@ obj-$(CONFIG_ARCH_IOP32X) += i2c.o
 obj-$(CONFIG_ARCH_IOP32X) += pci.o
 obj-$(CONFIG_ARCH_IOP32X) += setup.o
 obj-$(CONFIG_ARCH_IOP32X) += time.o
-obj-$(CONFIG_ARCH_IOP32X) += io.o
 obj-$(CONFIG_ARCH_IOP32X) += cp6.o
 obj-$(CONFIG_ARCH_IOP32X) += adma.o
 obj-$(CONFIG_ARCH_IOP32X) += pmu.o
+obj-$(CONFIG_ARCH_IOP32X) += restart.o
 
 # IOP33X
 obj-$(CONFIG_ARCH_IOP33X) += gpio.o
@@ -21,10 +21,10 @@ obj-$(CONFIG_ARCH_IOP33X) += i2c.o
 obj-$(CONFIG_ARCH_IOP33X) += pci.o
 obj-$(CONFIG_ARCH_IOP33X) += setup.o
 obj-$(CONFIG_ARCH_IOP33X) += time.o
-obj-$(CONFIG_ARCH_IOP33X) += io.o
 obj-$(CONFIG_ARCH_IOP33X) += cp6.o
 obj-$(CONFIG_ARCH_IOP33X) += adma.o
 obj-$(CONFIG_ARCH_IOP33X) += pmu.o
+obj-$(CONFIG_ARCH_IOP33X) += restart.o
 
 # IOP13XX
 obj-$(CONFIG_ARCH_IOP13XX) += cp6.o
diff --git a/arch/arm/plat-iop/io.c b/arch/arm/plat-iop/io.c
deleted file mode 100644
index e15bc17..0000000
--- a/arch/arm/plat-iop/io.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * iop3xx custom ioremap implementation
- * Copyright (c) 2006, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
- * Place - Suite 330, Boston, MA 02111-1307 USA.
- *
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-
-void * __iomem __iop3xx_ioremap(unsigned long cookie, size_t size,
-	unsigned int mtype)
-{
-	void __iomem * retval;
-
-	switch (cookie) {
-	case IOP3XX_PCI_LOWER_IO_PA ... IOP3XX_PCI_UPPER_IO_PA:
-		retval = (void *) IOP3XX_PCI_IO_PHYS_TO_VIRT(cookie);
-		break;
-	case IOP3XX_PERIPHERAL_PHYS_BASE ... IOP3XX_PERIPHERAL_UPPER_PA:
-		retval = (void *) IOP3XX_PMMR_PHYS_TO_VIRT(cookie);
-		break;
-	default:
-		retval = __arm_ioremap_caller(cookie, size, mtype,
-				__builtin_return_address(0));
-	}
-
-	return retval;
-}
-EXPORT_SYMBOL(__iop3xx_ioremap);
-
-void __iop3xx_iounmap(void __iomem *addr)
-{
-	extern void __iounmap(volatile void __iomem *addr);
-
-	switch ((u32) addr) {
-	case IOP3XX_PCI_LOWER_IO_VA ... IOP3XX_PCI_UPPER_IO_VA:
-	case IOP3XX_PERIPHERAL_VIRT_BASE ... IOP3XX_PERIPHERAL_UPPER_VA:
-		goto skip;
-	}
-	__iounmap(addr);
-
-skip:
-	return;
-}
-EXPORT_SYMBOL(__iop3xx_iounmap);
diff --git a/arch/arm/plat-iop/restart.c b/arch/arm/plat-iop/restart.c
new file mode 100644
index 0000000..6a85a0c
--- /dev/null
+++ b/arch/arm/plat-iop/restart.c
@@ -0,0 +1,19 @@
+/*
+ * restart.c
+ *
+ * Copyright (C) 2001 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <asm/hardware/iop3xx.h>
+#include <mach/hardware.h>
+
+void iop3xx_restart(char mode, const char *cmd)
+{
+	*IOP3XX_PCSR = 0x30;
+
+	/* Jump into ROM at address 0 */
+	soft_restart(0);
+}
diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c
index 568dd02..cbfbbe4 100644
--- a/arch/arm/plat-iop/time.c
+++ b/arch/arm/plat-iop/time.c
@@ -18,7 +18,6 @@
 #include <linux/time.h>
 #include <linux/init.h>
 #include <linux/timex.h>
-#include <linux/sched.h>
 #include <linux/io.h>
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
@@ -52,21 +51,12 @@ static struct clocksource iop_clocksource = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-static DEFINE_CLOCK_DATA(cd);
-
 /*
  * IOP sched_clock() implementation via its clocksource.
  */
-unsigned long long notrace sched_clock(void)
+static u32 notrace iop_read_sched_clock(void)
 {
-	u32 cyc = 0xffffffffu - read_tcr1();
-	return cyc_to_sched_clock(&cd, cyc, (u32)~0);
-}
-
-static void notrace iop_update_sched_clock(void)
-{
-	u32 cyc = 0xffffffffu - read_tcr1();
-	update_sched_clock(&cd, cyc, (u32)~0);
+	return 0xffffffffu - read_tcr1();
 }
 
 /*
@@ -152,7 +142,7 @@ void __init iop_init_time(unsigned long tick_rate)
 {
 	u32 timer_ctl;
 
-	init_sched_clock(&cd, iop_update_sched_clock, 32, tick_rate);
+	setup_sched_clock(iop_read_sched_clock, 32, tick_rate);
 
 	ticks_per_jiffy = DIV_ROUND_CLOSEST(tick_rate, HZ);
 	iop_tick_rate = tick_rate;
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index b3a1f2b3..b30708e 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -20,6 +20,7 @@ config ARCH_IMX_V6_V7
 	bool "i.MX3, i.MX6"
 	select AUTO_ZRELADDR if !ZBOOT_ROM
 	select ARM_PATCH_PHYS_VIRT
+	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  This enables support for systems based on the Freescale i.MX3 and i.MX6
 	  family.
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index b9f0f5f..076db84f 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -5,7 +5,6 @@
 # Common support
 obj-y := clock.o time.o devices.o cpu.o system.o irq-common.o
 
-obj-$(CONFIG_ARM_GIC) += gic.o
 obj-$(CONFIG_MXC_TZIC) += tzic.o
 obj-$(CONFIG_MXC_AVIC) += avic.o
 
diff --git a/arch/arm/plat-mxc/cpufreq.c b/arch/arm/plat-mxc/cpufreq.c
index 74aac96..73db34b 100644
--- a/arch/arm/plat-mxc/cpufreq.c
+++ b/arch/arm/plat-mxc/cpufreq.c
@@ -17,6 +17,7 @@
  * the CPU clock speed on the fly.
  */
 
+#include <linux/module.h>
 #include <linux/cpufreq.h>
 #include <linux/clk.h>
 #include <linux/err.h>
@@ -97,7 +98,7 @@ static int mxc_set_target(struct cpufreq_policy *policy,
 	return ret;
 }
 
-static int __init mxc_cpufreq_init(struct cpufreq_policy *policy)
+static int mxc_cpufreq_init(struct cpufreq_policy *policy)
 {
 	int ret;
 	int i;
diff --git a/arch/arm/plat-mxc/gic.c b/arch/arm/plat-mxc/gic.c
deleted file mode 100644
index 12f8f81..0000000
--- a/arch/arm/plat-mxc/gic.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/io.h>
-#include <asm/exception.h>
-#include <asm/localtimer.h>
-#include <asm/hardware/gic.h>
-#ifdef CONFIG_SMP
-#include <asm/smp.h>
-#endif
-
-asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
-{
-	u32 irqstat, irqnr;
-
-	do {
-		irqstat = readl_relaxed(gic_cpu_base_addr + GIC_CPU_INTACK);
-		irqnr = irqstat & 0x3ff;
-		if (irqnr == 1023)
-			break;
-
-		if (irqnr > 15 && irqnr < 1021)
-			handle_IRQ(irqnr, regs);
-#ifdef CONFIG_SMP
-		else {
-			writel_relaxed(irqstat, gic_cpu_base_addr +
-						GIC_CPU_EOI);
-			handle_IPI(irqnr, regs);
-		}
-#endif
-	} while (1);
-}
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 83b745a..83cca9b 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -71,8 +71,8 @@ extern int mx6q_clocks_init(void);
 extern struct platform_device *mxc_register_gpio(char *name, int id,
 	resource_size_t iobase, resource_size_t iosize, int irq, int irq_high);
 extern void mxc_set_cpu_type(unsigned int type);
+extern void mxc_restart(char, const char *);
 extern void mxc_arch_reset_init(void __iomem *);
-extern void mx51_efikamx_reset(void);
 extern int mx53_revision(void);
 extern int mx53_display_revision(void);
 
@@ -85,12 +85,10 @@ enum mxc_cpu_pwr_mode {
 };
 
 extern void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode);
-extern void (*imx_idle)(void);
 extern void imx_print_silicon_rev(const char *cpu, int srev);
 
 void avic_handle_irq(struct pt_regs *);
 void tzic_handle_irq(struct pt_regs *);
-void gic_handle_irq(struct pt_regs *);
 
 #define imx1_handle_irq avic_handle_irq
 #define imx21_handle_irq avic_handle_irq
@@ -123,6 +121,7 @@ static inline void imx_smp_prepare(void) {}
 extern void imx_enable_cpu(int cpu, bool enable);
 extern void imx_set_cpu_jump(int cpu, void *jump_addr);
 extern void imx_src_init(void);
+extern void imx_src_prepare_restart(void);
 extern void imx_gpc_init(void);
 extern void imx_gpc_pre_suspend(void);
 extern void imx_gpc_post_resume(void);
@@ -133,4 +132,5 @@ extern void imx53_qsb_common_init(void);
 extern void imx53_smd_common_init(void);
 extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
 extern void imx6q_pm_init(void);
+extern void imx6q_clock_map_io(void);
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S
index ca5cf26..def5d30 100644
--- a/arch/arm/plat-mxc/include/mach/entry-macro.S
+++ b/arch/arm/plat-mxc/include/mach/entry-macro.S
@@ -9,19 +9,8 @@
  * published by the Free Software Foundation.
  */
 
-/* Unused, we use CONFIG_MULTI_IRQ_HANDLER */
-
 	.macro	disable_fiq
 	.endm
 
-	.macro  get_irqnr_preamble, base, tmp
-	.endm
-
 	.macro  arch_ret_to_user, tmp1, tmp2
 	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-	.endm
-
-	.macro test_for_ipi, irqnr, irqstat, base, tmp
-	.endm
diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h
index 97b19e7..2b7c08d 100644
--- a/arch/arm/plat-mxc/include/mach/mx1.h
+++ b/arch/arm/plat-mxc/include/mach/mx1.h
@@ -12,8 +12,6 @@
 #ifndef __MACH_MX1_H__
 #define __MACH_MX1_H__
 
-#include <mach/vmalloc.h>
-
 /*
  * Memory map
  */
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index 00a7819..a4d36d6 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -50,20 +50,6 @@
 #define IMX_CHIP_REVISION_3_3		0x33
 #define IMX_CHIP_REVISION_UNKNOWN	0xff
 
-#define IMX_CHIP_REVISION_1_0_STRING		"1.0"
-#define IMX_CHIP_REVISION_1_1_STRING		"1.1"
-#define IMX_CHIP_REVISION_1_2_STRING		"1.2"
-#define IMX_CHIP_REVISION_1_3_STRING		"1.3"
-#define IMX_CHIP_REVISION_2_0_STRING		"2.0"
-#define IMX_CHIP_REVISION_2_1_STRING		"2.1"
-#define IMX_CHIP_REVISION_2_2_STRING		"2.2"
-#define IMX_CHIP_REVISION_2_3_STRING		"2.3"
-#define IMX_CHIP_REVISION_3_0_STRING		"3.0"
-#define IMX_CHIP_REVISION_3_1_STRING		"3.1"
-#define IMX_CHIP_REVISION_3_2_STRING		"3.2"
-#define IMX_CHIP_REVISION_3_3_STRING		"3.3"
-#define IMX_CHIP_REVISION_UNKNOWN_STRING	"unknown"
-
 #ifndef __ASSEMBLY__
 extern unsigned int __mxc_cpu_type;
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h
index cf88b35..13ad0df 100644
--- a/arch/arm/plat-mxc/include/mach/system.h
+++ b/arch/arm/plat-mxc/include/mach/system.h
@@ -17,16 +17,9 @@
 #ifndef __ASM_ARCH_MXC_SYSTEM_H__
 #define __ASM_ARCH_MXC_SYSTEM_H__
 
-extern void (*imx_idle)(void);
-
 static inline void arch_idle(void)
 {
-	if (imx_idle != NULL)
-		(imx_idle)();
-	else
-		cpu_do_idle();
+	cpu_do_idle();
 }
 
-void arch_reset(char mode, const char *cmd);
-
 #endif /* __ASM_ARCH_MXC_SYSTEM_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index 88fd404..477971b 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -98,6 +98,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id)
 	case MACH_TYPE_PCM043:
 	case MACH_TYPE_LILLY1131:
 	case MACH_TYPE_VPR200:
+	case MACH_TYPE_EUKREA_CPUIMX35SD:
 		uart_base = MX3X_UART1_BASE_ADDR;
 		break;
 	case MACH_TYPE_MAGX_ZN5:
diff --git a/arch/arm/plat-mxc/include/mach/vmalloc.h b/arch/arm/plat-mxc/include/mach/vmalloc.h
deleted file mode 100644
index ef6379c..0000000
--- a/arch/arm/plat-mxc/include/mach/vmalloc.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- *  Copyright (C) 2000 Russell King.
- *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MXC_VMALLOC_H__
-#define __ASM_ARCH_MXC_VMALLOC_H__
-
-/* vmalloc ending address */
-#define VMALLOC_END       0xf4000000UL
-
-#endif /* __ASM_ARCH_MXC_VMALLOC_H__ */
diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
index 42d74ea..e032717 100644
--- a/arch/arm/plat-mxc/pwm.c
+++ b/arch/arm/plat-mxc/pwm.c
@@ -32,6 +32,9 @@
 #define MX3_PWMSAR                0x0C    /* PWM Sample Register */
 #define MX3_PWMPR                 0x10    /* PWM Period Register */
 #define MX3_PWMCR_PRESCALER(x)    (((x - 1) & 0xFFF) << 4)
+#define MX3_PWMCR_DOZEEN                (1 << 24)
+#define MX3_PWMCR_WAITEN                (1 << 23)
+#define MX3_PWMCR_DBGEN			(1 << 22)
 #define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16)
 #define MX3_PWMCR_CLKSRC_IPG      (1 << 16)
 #define MX3_PWMCR_EN              (1 << 0)
@@ -74,10 +77,21 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
 		do_div(c, period_ns);
 		duty_cycles = c;
 
+		/*
+		 * according to imx pwm RM, the real period value should be
+		 * PERIOD value in PWMPR plus 2.
+		 */
+		if (period_cycles > 2)
+			period_cycles -= 2;
+		else
+			period_cycles = 0;
+
 		writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR);
 		writel(period_cycles, pwm->mmio_base + MX3_PWMPR);
 
-		cr = MX3_PWMCR_PRESCALER(prescale) | MX3_PWMCR_EN;
+		cr = MX3_PWMCR_PRESCALER(prescale) |
+			MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN |
+			MX3_PWMCR_DBGEN | MX3_PWMCR_EN;
 
 		if (cpu_is_mx25())
 			cr |= MX3_PWMCR_CLKSRC_IPG;
diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c
index 9dad8dc..3599bf2 100644
--- a/arch/arm/plat-mxc/system.c
+++ b/arch/arm/plat-mxc/system.c
@@ -21,6 +21,7 @@
 #include <linux/io.h>
 #include <linux/err.h>
 #include <linux/delay.h>
+#include <linux/module.h>
 
 #include <mach/hardware.h>
 #include <mach/common.h>
@@ -28,25 +29,18 @@
 #include <asm/system.h>
 #include <asm/mach-types.h>
 
-void (*imx_idle)(void) = NULL;
 void __iomem *(*imx_ioremap)(unsigned long, size_t, unsigned int) = NULL;
+EXPORT_SYMBOL_GPL(imx_ioremap);
 
 static void __iomem *wdog_base;
 
 /*
  * Reset the system. It is called by machine_restart().
  */
-void arch_reset(char mode, const char *cmd)
+void mxc_restart(char mode, const char *cmd)
 {
 	unsigned int wcr_enable;
 
-#ifdef CONFIG_MACH_MX51_EFIKAMX
-	if (machine_is_mx51_efikamx()) {
-		mx51_efikamx_reset();
-		return;
-	}
-#endif
-
 	if (cpu_is_mx1()) {
 		wcr_enable = (1 << 0);
 	} else {
@@ -70,7 +64,7 @@ void arch_reset(char mode, const char *cmd)
 	mdelay(50);
 
 	/* we'll take a jump through zero as a poor second */
-	cpu_reset(0);
+	soft_restart(0);
 }
 
 void mxc_arch_reset_init(void __iomem *base)
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 4b0fe28..1c96cdb 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -108,18 +108,9 @@ static void gpt_irq_acknowledge(void)
 
 static void __iomem *sched_clock_reg;
 
-static DEFINE_CLOCK_DATA(cd);
-unsigned long long notrace sched_clock(void)
+static u32 notrace mxc_read_sched_clock(void)
 {
-	cycle_t cyc = sched_clock_reg ? __raw_readl(sched_clock_reg) : 0;
-
-	return cyc_to_sched_clock(&cd, cyc, (u32)~0);
-}
-
-static void notrace mxc_update_sched_clock(void)
-{
-	cycle_t cyc = sched_clock_reg ? __raw_readl(sched_clock_reg) : 0;
-	update_sched_clock(&cd, cyc, (u32)~0);
+	return sched_clock_reg ? __raw_readl(sched_clock_reg) : 0;
 }
 
 static int __init mxc_clocksource_init(struct clk *timer_clk)
@@ -129,7 +120,7 @@ static int __init mxc_clocksource_init(struct clk *timer_clk)
 
 	sched_clock_reg = reg;
 
-	init_sched_clock(&cd, mxc_update_sched_clock, 32, c);
+	setup_sched_clock(mxc_read_sched_clock, 32, c);
 	return clocksource_mmio_init(reg, "mxc_timer1", c, 200, 32,
 			clocksource_mmio_readl_up);
 }
diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
index 30b6433..ad1b45b 100644
--- a/arch/arm/plat-nomadik/timer.c
+++ b/arch/arm/plat-nomadik/timer.c
@@ -17,7 +17,6 @@
 #include <linux/clk.h>
 #include <linux/jiffies.h>
 #include <linux/err.h>
-#include <linux/sched.h>
 #include <asm/mach/time.h>
 #include <asm/sched_clock.h>
 
@@ -79,23 +78,12 @@ void __iomem *mtu_base; /* Assigned by machine code */
  * local implementation which uses the clocksource to get some
  * better resolution when scheduling the kernel.
  */
-static DEFINE_CLOCK_DATA(cd);
-
-unsigned long long notrace sched_clock(void)
+static u32 notrace nomadik_read_sched_clock(void)
 {
-	u32 cyc;
-
 	if (unlikely(!mtu_base))
 		return 0;
 
-	cyc = -readl(mtu_base + MTU_VAL(0));
-	return cyc_to_sched_clock(&cd, cyc, (u32)~0);
-}
-
-static void notrace nomadik_update_sched_clock(void)
-{
-	u32 cyc = -readl(mtu_base + MTU_VAL(0));
-	update_sched_clock(&cd, cyc, (u32)~0);
+	return -readl(mtu_base + MTU_VAL(0));
 }
 #endif
 
@@ -231,9 +219,11 @@ void __init nmdk_timer_init(void)
 			rate, 200, 32, clocksource_mmio_readl_down))
 		pr_err("timer: failed to initialize clock source %s\n",
 		       "mtu_0");
+
 #ifdef CONFIG_NOMADIK_MTU_SCHED_CLOCK
-	init_sched_clock(&cd, nomadik_update_sched_clock, 32, rate);
+	setup_sched_clock(nomadik_read_sched_clock, 32, rate);
 #endif
+
 	/* Timer 1 is used for events */
 
 	clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE);
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index 9852622..3df04d9 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -4,7 +4,7 @@
 
 # Common support
 obj-y := common.o sram.o clock.o devices.o dma.o mux.o \
-	 usb.o fb.o io.o counter_32k.o
+	 usb.o fb.o counter_32k.o
 obj-m :=
 obj-n :=
 obj-  :=
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index d9f10a3..2ee6341 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -14,6 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/dma-mapping.h>
 #include <linux/omapfb.h>
 
 #include <plat/common.h>
@@ -66,3 +67,10 @@ void __init omap_reserve(void)
 	omap_vram_reserve_sdram_memblock();
 	omap_dsp_reserve_sdram_memblock();
 }
+
+void __init omap_init_consistent_dma_size(void)
+{
+#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
+	init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20);
+#endif
+}
diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c
index a6cbb71..5f0f229 100644
--- a/arch/arm/plat-omap/counter_32k.c
+++ b/arch/arm/plat-omap/counter_32k.c
@@ -17,7 +17,6 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
-#include <linux/sched.h>
 #include <linux/clocksource.h>
 
 #include <asm/sched_clock.h>
@@ -37,41 +36,9 @@ static void __iomem *timer_32k_base;
 
 #define OMAP16XX_TIMER_32K_SYNCHRONIZED		0xfffbc410
 
-/*
- * Returns current time from boot in nsecs. It's OK for this to wrap
- * around for now, as it's just a relative time stamp.
- */
-static DEFINE_CLOCK_DATA(cd);
-
-/*
- * Constants generated by clocks_calc_mult_shift(m, s, 32768, NSEC_PER_SEC, 60).
- * This gives a resolution of about 30us and a wrap period of about 36hrs.
- */
-#define SC_MULT		4000000000u
-#define SC_SHIFT	17
-
-static inline unsigned long long notrace _omap_32k_sched_clock(void)
-{
-	u32 cyc = timer_32k_base ? __raw_readl(timer_32k_base) : 0;
-	return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0, SC_MULT, SC_SHIFT);
-}
-
-#if defined(CONFIG_OMAP_32K_TIMER) && !defined(CONFIG_OMAP_MPU_TIMER)
-unsigned long long notrace sched_clock(void)
-{
-	return _omap_32k_sched_clock();
-}
-#else
-unsigned long long notrace omap_32k_sched_clock(void)
-{
-	return _omap_32k_sched_clock();
-}
-#endif
-
-static void notrace omap_update_sched_clock(void)
+static u32 notrace omap_32k_read_sched_clock(void)
 {
-	u32 cyc = timer_32k_base ? __raw_readl(timer_32k_base) : 0;
-	update_sched_clock(&cd, cyc, (u32)~0);
+	return timer_32k_base ? __raw_readl(timer_32k_base) : 0;
 }
 
 /**
@@ -147,8 +114,7 @@ int __init omap_init_clocksource_32k(void)
 					  clocksource_mmio_readl_up))
 			printk(err, "32k_counter");
 
-		init_fixed_sched_clock(&cd, omap_update_sched_clock, 32,
-				       32768, SC_MULT, SC_SHIFT);
+		setup_sched_clock(omap_32k_read_sched_clock, 32, 32768);
 	}
 	return 0;
 }
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
index 197ca03..eb73ab4 100644
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -165,8 +165,8 @@ struct dpll_data {
 	u8			auto_recal_bit;
 	u8			recal_en_bit;
 	u8			recal_st_bit;
-	u8			flags;
 #  endif
+	u8			flags;
 };
 
 #endif
diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h
index c50df48..b4d7ec3 100644
--- a/arch/arm/plat-omap/include/plat/common.h
+++ b/arch/arm/plat-omap/include/plat/common.h
@@ -27,94 +27,14 @@
 #ifndef __ARCH_ARM_MACH_OMAP_COMMON_H
 #define __ARCH_ARM_MACH_OMAP_COMMON_H
 
-#include <linux/delay.h>
-
 #include <plat/i2c.h>
+#include <plat/omap_hwmod.h>
 
-struct sys_timer;
-
-extern void omap_map_common_io(void);
-extern struct sys_timer omap1_timer;
-extern struct sys_timer omap2_timer;
-extern struct sys_timer omap3_timer;
-extern struct sys_timer omap3_secure_timer;
-extern struct sys_timer omap4_timer;
-extern bool omap_32k_timer_init(void);
 extern int __init omap_init_clocksource_32k(void);
-extern unsigned long long notrace omap_32k_sched_clock(void);
 
 extern void omap_reserve(void);
-
-void omap2420_init_early(void);
-void omap2430_init_early(void);
-void omap3430_init_early(void);
-void omap35xx_init_early(void);
-void omap3630_init_early(void);
-void omap3_init_early(void);	/* Do not use this one */
-void am35xx_init_early(void);
-void ti816x_init_early(void);
-void omap4430_init_early(void);
+extern int omap_dss_reset(struct omap_hwmod *);
 
 void omap_sram_init(void);
 
-/*
- * IO bases for various OMAP processors
- * Except the tap base, rest all the io bases
- * listed are physical addresses.
- */
-struct omap_globals {
-	u32		class;		/* OMAP class to detect */
-	void __iomem	*tap;		/* Control module ID code */
-	void __iomem	*sdrc;           /* SDRAM Controller */
-	void __iomem	*sms;            /* SDRAM Memory Scheduler */
-	void __iomem	*ctrl;           /* System Control Module */
-	void __iomem	*ctrl_pad;	/* PAD Control Module */
-	void __iomem	*prm;            /* Power and Reset Management */
-	void __iomem	*cm;             /* Clock Management */
-	void __iomem	*cm2;
-};
-
-void omap2_set_globals_242x(void);
-void omap2_set_globals_243x(void);
-void omap2_set_globals_3xxx(void);
-void omap2_set_globals_443x(void);
-void omap2_set_globals_ti816x(void);
-
-/* These get called from omap2_set_globals_xxxx(), do not call these */
-void omap2_set_globals_tap(struct omap_globals *);
-void omap2_set_globals_sdrc(struct omap_globals *);
-void omap2_set_globals_control(struct omap_globals *);
-void omap2_set_globals_prcm(struct omap_globals *);
-
-void omap242x_map_io(void);
-void omap243x_map_io(void);
-void omap3_map_io(void);
-void omap4_map_io(void);
-
-
-/**
- * omap_test_timeout - busy-loop, testing a condition
- * @cond: condition to test until it evaluates to true
- * @timeout: maximum number of microseconds in the timeout
- * @index: loop index (integer)
- *
- * Loop waiting for @cond to become true or until at least @timeout
- * microseconds have passed.  To use, define some integer @index in the
- * calling code.  After running, if @index == @timeout, then the loop has
- * timed out.
- */
-#define omap_test_timeout(cond, timeout, index)			\
-({								\
-	for (index = 0; index < timeout; index++) {		\
-		if (cond)					\
-			break;					\
-		udelay(1);					\
-	}							\
-})
-
-extern struct device *omap2_get_mpuss_device(void);
-extern struct device *omap2_get_iva_device(void);
-extern struct device *omap2_get_l3_device(void);
-extern struct device *omap4_get_dsp_device(void);
-
 #endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */
diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h
index 7f2969e..1234944 100644
--- a/arch/arm/plat-omap/include/plat/io.h
+++ b/arch/arm/plat-omap/include/plat/io.h
@@ -247,8 +247,6 @@
  * NOTE: Please use ioremap + __raw_read/write where possible instead of these
  */
 
-void omap_ioremap_init(void);
-
 extern u8 omap_readb(u32 pa);
 extern u16 omap_readw(u32 pa);
 extern u32 omap_readl(u32 pa);
@@ -257,83 +255,9 @@ extern void omap_writew(u16 v, u32 pa);
 extern void omap_writel(u32 v, u32 pa);
 
 struct omap_sdrc_params;
-
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-void omap7xx_map_io(void);
-#else
-static inline void omap_map_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP15XX
-void omap15xx_map_io(void);
-#else
-static inline void omap15xx_map_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP16XX
-void omap16xx_map_io(void);
-#else
-static inline void omap16xx_map_io(void)
-{
-}
-#endif
-
-void omap1_init_early(void);
-
-#ifdef CONFIG_SOC_OMAP2420
-extern void omap242x_map_common_io(void);
-#else
-static inline void omap242x_map_common_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_SOC_OMAP2430
-extern void omap243x_map_common_io(void);
-#else
-static inline void omap243x_map_common_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP3
-extern void omap34xx_map_common_io(void);
-#else
-static inline void omap34xx_map_common_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_SOC_OMAPTI816X
-extern void omapti816x_map_common_io(void);
-#else
-static inline void omapti816x_map_common_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP4
-extern void omap44xx_map_common_io(void);
-#else
-static inline void omap44xx_map_common_io(void)
-{
-}
-#endif
-
-extern void omap2_init_common_infrastructure(void);
 extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
 				      struct omap_sdrc_params *sdrc_cs1);
 
-#define __arch_ioremap	omap_ioremap
-#define __arch_iounmap	omap_iounmap
-
-void __iomem *omap_ioremap(unsigned long phys, size_t size, unsigned int type);
-void omap_iounmap(volatile void __iomem *addr);
-
 extern void __init omap_init_consistent_dma_size(void);
 
 #endif
diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h
index 30e1071..ebda738 100644
--- a/arch/arm/plat-omap/include/plat/irqs.h
+++ b/arch/arm/plat-omap/include/plat/irqs.h
@@ -436,20 +436,6 @@
 #define INTCPS_NR_MIR_REGS	3
 #define INTCPS_NR_IRQS		96
 
-#ifndef __ASSEMBLY__
-extern void __iomem *omap_irq_base;
-void omap1_init_irq(void);
-void omap2_init_irq(void);
-void omap3_init_irq(void);
-void ti816x_init_irq(void);
-extern int omap_irq_pending(void);
-void omap_intc_save_context(void);
-void omap_intc_restore_context(void);
-void omap3_intc_suspend(void);
-void omap3_intc_prepare_idle(void);
-void omap3_intc_resume_idle(void);
-#endif
-
 #include <mach/hardware.h>
 
 #ifdef CONFIG_FIQ
diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h
index 1ab9fd6..ac44bde 100644
--- a/arch/arm/plat-omap/include/plat/serial.h
+++ b/arch/arm/plat-omap/include/plat/serial.h
@@ -2,7 +2,7 @@
  * arch/arm/plat-omap/include/mach/serial.h
  *
  * Copyright (C) 2009 Texas Instruments
- * Addded OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
+ * Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
diff --git a/arch/arm/plat-omap/include/plat/system.h b/arch/arm/plat-omap/include/plat/system.h
index c5fa9e9..8e5ebd7 100644
--- a/arch/arm/plat-omap/include/plat/system.h
+++ b/arch/arm/plat-omap/include/plat/system.h
@@ -12,6 +12,4 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-extern void (*arch_reset)(char, const char *);
-
 #endif
diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
deleted file mode 100644
index 333871f..0000000
--- a/arch/arm/plat-omap/io.c
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * Common io.c file
- * This file is created by Russell King <rmk+kernel@arm.linux.org.uk>
- *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/mm.h>
-#include <linux/dma-mapping.h>
-
-#include <plat/omap7xx.h>
-#include <plat/omap1510.h>
-#include <plat/omap16xx.h>
-#include <plat/omap24xx.h>
-#include <plat/omap34xx.h>
-#include <plat/omap44xx.h>
-
-#define BETWEEN(p,st,sz)	((p) >= (st) && (p) < ((st) + (sz)))
-#define XLATE(p,pst,vst)	((void __iomem *)((p) - (pst) + (vst)))
-
-static int initialized;
-
-/*
- * Intercept ioremap() requests for addresses in our fixed mapping regions.
- */
-void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
-{
-
-	WARN(!initialized, "Do not use ioremap before init_early\n");
-
-#ifdef CONFIG_ARCH_OMAP1
-	if (cpu_class_is_omap1()) {
-		if (BETWEEN(p, OMAP1_IO_PHYS, OMAP1_IO_SIZE))
-			return XLATE(p, OMAP1_IO_PHYS, OMAP1_IO_VIRT);
-	}
-	if (cpu_is_omap7xx()) {
-		if (BETWEEN(p, OMAP7XX_DSP_BASE, OMAP7XX_DSP_SIZE))
-			return XLATE(p, OMAP7XX_DSP_BASE, OMAP7XX_DSP_START);
-
-		if (BETWEEN(p, OMAP7XX_DSPREG_BASE, OMAP7XX_DSPREG_SIZE))
-			return XLATE(p, OMAP7XX_DSPREG_BASE,
-					OMAP7XX_DSPREG_START);
-	}
-	if (cpu_is_omap15xx()) {
-		if (BETWEEN(p, OMAP1510_DSP_BASE, OMAP1510_DSP_SIZE))
-			return XLATE(p, OMAP1510_DSP_BASE, OMAP1510_DSP_START);
-
-		if (BETWEEN(p, OMAP1510_DSPREG_BASE, OMAP1510_DSPREG_SIZE))
-			return XLATE(p, OMAP1510_DSPREG_BASE,
-					OMAP1510_DSPREG_START);
-	}
-	if (cpu_is_omap16xx()) {
-		if (BETWEEN(p, OMAP16XX_DSP_BASE, OMAP16XX_DSP_SIZE))
-			return XLATE(p, OMAP16XX_DSP_BASE, OMAP16XX_DSP_START);
-
-		if (BETWEEN(p, OMAP16XX_DSPREG_BASE, OMAP16XX_DSPREG_SIZE))
-			return XLATE(p, OMAP16XX_DSPREG_BASE,
-					OMAP16XX_DSPREG_START);
-	}
-#endif
-#ifdef CONFIG_ARCH_OMAP2
-	if (cpu_is_omap24xx()) {
-		if (BETWEEN(p, L3_24XX_PHYS, L3_24XX_SIZE))
-			return XLATE(p, L3_24XX_PHYS, L3_24XX_VIRT);
-		if (BETWEEN(p, L4_24XX_PHYS, L4_24XX_SIZE))
-			return XLATE(p, L4_24XX_PHYS, L4_24XX_VIRT);
-	}
-	if (cpu_is_omap2420()) {
-		if (BETWEEN(p, DSP_MEM_2420_PHYS, DSP_MEM_2420_SIZE))
-			return XLATE(p, DSP_MEM_2420_PHYS, DSP_MEM_2420_VIRT);
-		if (BETWEEN(p, DSP_IPI_2420_PHYS, DSP_IPI_2420_SIZE))
-			return XLATE(p, DSP_IPI_2420_PHYS, DSP_IPI_2420_SIZE);
-		if (BETWEEN(p, DSP_MMU_2420_PHYS, DSP_MMU_2420_SIZE))
-			return XLATE(p, DSP_MMU_2420_PHYS, DSP_MMU_2420_VIRT);
-	}
-	if (cpu_is_omap2430()) {
-		if (BETWEEN(p, L4_WK_243X_PHYS, L4_WK_243X_SIZE))
-			return XLATE(p, L4_WK_243X_PHYS, L4_WK_243X_VIRT);
-		if (BETWEEN(p, OMAP243X_GPMC_PHYS, OMAP243X_GPMC_SIZE))
-			return XLATE(p, OMAP243X_GPMC_PHYS, OMAP243X_GPMC_VIRT);
-		if (BETWEEN(p, OMAP243X_SDRC_PHYS, OMAP243X_SDRC_SIZE))
-			return XLATE(p, OMAP243X_SDRC_PHYS, OMAP243X_SDRC_VIRT);
-		if (BETWEEN(p, OMAP243X_SMS_PHYS, OMAP243X_SMS_SIZE))
-			return XLATE(p, OMAP243X_SMS_PHYS, OMAP243X_SMS_VIRT);
-	}
-#endif
-#ifdef CONFIG_ARCH_OMAP3
-	if (cpu_is_ti816x()) {
-		if (BETWEEN(p, L4_34XX_PHYS, L4_34XX_SIZE))
-			return XLATE(p, L4_34XX_PHYS, L4_34XX_VIRT);
-	} else if (cpu_is_omap34xx()) {
-		if (BETWEEN(p, L3_34XX_PHYS, L3_34XX_SIZE))
-			return XLATE(p, L3_34XX_PHYS, L3_34XX_VIRT);
-		if (BETWEEN(p, L4_34XX_PHYS, L4_34XX_SIZE))
-			return XLATE(p, L4_34XX_PHYS, L4_34XX_VIRT);
-		if (BETWEEN(p, OMAP34XX_GPMC_PHYS, OMAP34XX_GPMC_SIZE))
-			return XLATE(p, OMAP34XX_GPMC_PHYS, OMAP34XX_GPMC_VIRT);
-		if (BETWEEN(p, OMAP343X_SMS_PHYS, OMAP343X_SMS_SIZE))
-			return XLATE(p, OMAP343X_SMS_PHYS, OMAP343X_SMS_VIRT);
-		if (BETWEEN(p, OMAP343X_SDRC_PHYS, OMAP343X_SDRC_SIZE))
-			return XLATE(p, OMAP343X_SDRC_PHYS, OMAP343X_SDRC_VIRT);
-		if (BETWEEN(p, L4_PER_34XX_PHYS, L4_PER_34XX_SIZE))
-			return XLATE(p, L4_PER_34XX_PHYS, L4_PER_34XX_VIRT);
-		if (BETWEEN(p, L4_EMU_34XX_PHYS, L4_EMU_34XX_SIZE))
-			return XLATE(p, L4_EMU_34XX_PHYS, L4_EMU_34XX_VIRT);
-	}
-#endif
-#ifdef CONFIG_ARCH_OMAP4
-	if (cpu_is_omap44xx()) {
-		if (BETWEEN(p, L3_44XX_PHYS, L3_44XX_SIZE))
-			return XLATE(p, L3_44XX_PHYS, L3_44XX_VIRT);
-		if (BETWEEN(p, L4_44XX_PHYS, L4_44XX_SIZE))
-			return XLATE(p, L4_44XX_PHYS, L4_44XX_VIRT);
-		if (BETWEEN(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_SIZE))
-			return XLATE(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_VIRT);
-		if (BETWEEN(p, OMAP44XX_EMIF1_PHYS, OMAP44XX_EMIF1_SIZE))
-			return XLATE(p, OMAP44XX_EMIF1_PHYS,		\
-							OMAP44XX_EMIF1_VIRT);
-		if (BETWEEN(p, OMAP44XX_EMIF2_PHYS, OMAP44XX_EMIF2_SIZE))
-			return XLATE(p, OMAP44XX_EMIF2_PHYS,		\
-							OMAP44XX_EMIF2_VIRT);
-		if (BETWEEN(p, OMAP44XX_DMM_PHYS, OMAP44XX_DMM_SIZE))
-			return XLATE(p, OMAP44XX_DMM_PHYS, OMAP44XX_DMM_VIRT);
-		if (BETWEEN(p, L4_PER_44XX_PHYS, L4_PER_44XX_SIZE))
-			return XLATE(p, L4_PER_44XX_PHYS, L4_PER_44XX_VIRT);
-		if (BETWEEN(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_SIZE))
-			return XLATE(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_VIRT);
-	}
-#endif
-	return __arm_ioremap_caller(p, size, type, __builtin_return_address(0));
-}
-EXPORT_SYMBOL(omap_ioremap);
-
-void omap_iounmap(volatile void __iomem *addr)
-{
-	unsigned long virt = (unsigned long)addr;
-
-	if (virt >= VMALLOC_START && virt < VMALLOC_END)
-		__iounmap(addr);
-}
-EXPORT_SYMBOL(omap_iounmap);
-
-void __init omap_init_consistent_dma_size(void)
-{
-#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
-	init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20);
-#endif
-}
-
-void __init omap_ioremap_init(void)
-{
-	initialized++;
-}
diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c
index 41ab97e..10d1608 100644
--- a/arch/arm/plat-orion/gpio.c
+++ b/arch/arm/plat-orion/gpio.c
@@ -384,12 +384,16 @@ void __init orion_gpio_init(int gpio_base, int ngpio,
 	struct orion_gpio_chip *ochip;
 	struct irq_chip_generic *gc;
 	struct irq_chip_type *ct;
+	char gc_label[16];
 
 	if (orion_gpio_chip_count == ARRAY_SIZE(orion_gpio_chips))
 		return;
 
+	snprintf(gc_label, sizeof(gc_label), "orion_gpio%d",
+		orion_gpio_chip_count);
+
 	ochip = orion_gpio_chips + orion_gpio_chip_count;
-	ochip->chip.label = "orion_gpio";
+	ochip->chip.label = kstrdup(gc_label, GFP_KERNEL);
 	ochip->chip.request = orion_gpio_request;
 	ochip->chip.direction_input = orion_gpio_direction_input;
 	ochip->chip.get = orion_gpio_get;
diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index 69a6136..1ed8d13 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -12,7 +12,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/sched.h>
 #include <linux/timer.h>
 #include <linux/clockchips.h>
 #include <linux/interrupt.h>
@@ -60,24 +59,10 @@ static u32 ticks_per_jiffy;
  * Orion's sched_clock implementation. It has a resolution of
  * at least 7.5ns (133MHz TCLK).
  */
-static DEFINE_CLOCK_DATA(cd);
 
-unsigned long long notrace sched_clock(void)
+static u32 notrace orion_read_sched_clock(void)
 {
-	u32 cyc = ~readl(timer_base + TIMER0_VAL_OFF);
-	return cyc_to_sched_clock(&cd, cyc, (u32)~0);
-}
-
-
-static void notrace orion_update_sched_clock(void)
-{
-	u32 cyc = ~readl(timer_base + TIMER0_VAL_OFF);
-	update_sched_clock(&cd, cyc, (u32)~0);
-}
-
-static void __init setup_sched_clock(unsigned long tclk)
-{
-	init_sched_clock(&cd, orion_update_sched_clock, 32, tclk);
+	return ~readl(timer_base + TIMER0_VAL_OFF);
 }
 
 /*
@@ -217,7 +202,7 @@ orion_time_init(u32 _bridge_base, u32 _bridge_timer1_clr_mask,
 	/*
 	 * Set scale and timer for sched_clock.
 	 */
-	setup_sched_clock(tclk);
+	setup_sched_clock(orion_read_sched_clock, 32, tclk);
 
 	/*
 	 * Setup free-running clocksource timer (interrupts
diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c
index bcc43f3..084604b 100644
--- a/arch/arm/plat-s3c24xx/common-smdk.c
+++ b/arch/arm/plat-s3c24xx/common-smdk.c
@@ -19,7 +19,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/gpio.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/platform_device.h>
 
 #include <linux/mtd/mtd.h>
diff --git a/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c b/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
index a927666..c7adad0 100644
--- a/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
+++ b/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
@@ -12,7 +12,7 @@
 */
 
 #include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/cpufreq.h>
diff --git a/arch/arm/plat-s3c24xx/cpu-freq.c b/arch/arm/plat-s3c24xx/cpu-freq.c
index b3d3d02..4680799 100644
--- a/arch/arm/plat-s3c24xx/cpu-freq.c
+++ b/arch/arm/plat-s3c24xx/cpu-freq.c
@@ -20,7 +20,7 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/sysfs.h>
 #include <linux/slab.h>
 
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 3c63353..1121df1 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -192,27 +192,6 @@ static unsigned long s3c24xx_read_idcode_v4(void)
 	return __raw_readl(S3C2410_GSTATUS1);
 }
 
-/* Hook for arm_pm_restart to ensure we execute the reset code
- * with the caches enabled. It seems at least the S3C2440 has a problem
- * resetting if there is bus activity interrupted by the reset.
- */
-static void s3c24xx_pm_restart(char mode, const char *cmd)
-{
-	if (mode != 's') {
-		unsigned long flags;
-
-		local_irq_save(flags);
-		__cpuc_flush_kern_all();
-		__cpuc_flush_user_all();
-
-		arch_reset(mode, cmd);
-		local_irq_restore(flags);
-	}
-
-	/* fallback, or unhandled */
-	arm_machine_restart(mode, cmd);
-}
-
 void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
 {
 	/* initialise the io descriptors we need for initialisation */
@@ -226,7 +205,5 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
 	}
 	s3c24xx_init_cpu();
 
-	arm_pm_restart = s3c24xx_pm_restart;
-
 	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
 }
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index fc8c5f8..bc42c04 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -22,7 +22,7 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/syscore_ops.h>
 
 #include <asm/irq.h>
diff --git a/arch/arm/plat-s3c24xx/pm-simtec.c b/arch/arm/plat-s3c24xx/pm-simtec.c
index 663b280..68296b1 100644
--- a/arch/arm/plat-s3c24xx/pm-simtec.c
+++ b/arch/arm/plat-s3c24xx/pm-simtec.c
@@ -18,7 +18,6 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
-#include <linux/sysdev.h>
 #include <linux/device.h>
 #include <linux/io.h>
 
diff --git a/arch/arm/plat-s3c24xx/s3c2410-clock.c b/arch/arm/plat-s3c24xx/s3c2410-clock.c
index def76aa..25dc4d4 100644
--- a/arch/arm/plat-s3c24xx/s3c2410-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c2410-clock.c
@@ -26,7 +26,7 @@
 #include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/err.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/clk.h>
 #include <linux/mutex.h>
 #include <linux/delay.h>
diff --git a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
index 0b46d38..48eee39 100644
--- a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
+++ b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
@@ -17,7 +17,7 @@
 #include <linux/ioport.h>
 #include <linux/cpufreq.h>
 #include <linux/seq_file.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/err.h>
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index 9b9968f..8167ce6 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -11,6 +11,7 @@ config PLAT_S5P
 	default y
 	select ARM_VIC if !ARCH_EXYNOS4
 	select ARM_GIC if ARCH_EXYNOS4
+	select GIC_NON_BANKED if ARCH_EXYNOS4
 	select NO_IOPORT
 	select ARCH_REQUIRE_GPIOLIB
 	select S3C_GPIO_TRACK
diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
index 8763440..30d8c30 100644
--- a/arch/arm/plat-s5p/Makefile
+++ b/arch/arm/plat-s5p/Makefile
@@ -13,7 +13,6 @@ obj-				:=
 # Core files
 
 obj-y				+= dev-uart.o
-obj-y				+= cpu.o
 obj-y				+= clock.o
 obj-y				+= irq.o
 obj-$(CONFIG_S5P_EXT_INT)	+= irq-eint.o
diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-s5p/clock.c
index 5f84a3f..963edea 100644
--- a/arch/arm/plat-s5p/clock.c
+++ b/arch/arm/plat-s5p/clock.c
@@ -17,7 +17,7 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/clk.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/io.h>
 #include <asm/div64.h>
 
diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c
deleted file mode 100644
index a56959e..0000000
--- a/arch/arm/plat-s5p/cpu.c
+++ /dev/null
@@ -1,144 +0,0 @@
-/* linux/arch/arm/plat-s5p/cpu.c
- *
- * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * S5P CPU Support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/s5p6440.h>
-#include <plat/s5p6450.h>
-#include <plat/s5pc100.h>
-#include <plat/s5pv210.h>
-#include <plat/exynos4.h>
-
-/* table of supported CPUs */
-
-static const char name_s5p6440[] = "S5P6440";
-static const char name_s5p6450[] = "S5P6450";
-static const char name_s5pc100[] = "S5PC100";
-static const char name_s5pv210[] = "S5PV210/S5PC110";
-static const char name_exynos4210[] = "EXYNOS4210";
-static const char name_exynos4212[] = "EXYNOS4212";
-static const char name_exynos4412[] = "EXYNOS4412";
-
-static struct cpu_table cpu_ids[] __initdata = {
-	{
-		.idcode		= S5P6440_CPU_ID,
-		.idmask		= S5P64XX_CPU_MASK,
-		.map_io		= s5p6440_map_io,
-		.init_clocks	= s5p6440_init_clocks,
-		.init_uarts	= s5p6440_init_uarts,
-		.init		= s5p64x0_init,
-		.name		= name_s5p6440,
-	}, {
-		.idcode		= S5P6450_CPU_ID,
-		.idmask		= S5P64XX_CPU_MASK,
-		.map_io		= s5p6450_map_io,
-		.init_clocks	= s5p6450_init_clocks,
-		.init_uarts	= s5p6450_init_uarts,
-		.init		= s5p64x0_init,
-		.name		= name_s5p6450,
-	}, {
-		.idcode		= S5PC100_CPU_ID,
-		.idmask		= S5PC100_CPU_MASK,
-		.map_io		= s5pc100_map_io,
-		.init_clocks	= s5pc100_init_clocks,
-		.init_uarts	= s5pc100_init_uarts,
-		.init		= s5pc100_init,
-		.name		= name_s5pc100,
-	}, {
-		.idcode		= S5PV210_CPU_ID,
-		.idmask		= S5PV210_CPU_MASK,
-		.map_io		= s5pv210_map_io,
-		.init_clocks	= s5pv210_init_clocks,
-		.init_uarts	= s5pv210_init_uarts,
-		.init		= s5pv210_init,
-		.name		= name_s5pv210,
-	}, {
-		.idcode		= EXYNOS4210_CPU_ID,
-		.idmask		= EXYNOS4_CPU_MASK,
-		.map_io		= exynos4_map_io,
-		.init_clocks	= exynos4_init_clocks,
-		.init_uarts	= exynos4_init_uarts,
-		.init		= exynos_init,
-		.name		= name_exynos4210,
-	}, {
-		.idcode		= EXYNOS4212_CPU_ID,
-		.idmask		= EXYNOS4_CPU_MASK,
-		.map_io		= exynos4_map_io,
-		.init_clocks	= exynos4_init_clocks,
-		.init_uarts	= exynos4_init_uarts,
-		.init		= exynos_init,
-		.name		= name_exynos4212,
-	}, {
-		.idcode		= EXYNOS4412_CPU_ID,
-		.idmask		= EXYNOS4_CPU_MASK,
-		.map_io		= exynos4_map_io,
-		.init_clocks	= exynos4_init_clocks,
-		.init_uarts	= exynos4_init_uarts,
-		.init		= exynos_init,
-		.name		= name_exynos4412,
-	},
-};
-
-/* minimal IO mapping */
-
-static struct map_desc s5p_iodesc[] __initdata = {
-	{
-		.virtual	= (unsigned long)S5P_VA_CHIPID,
-		.pfn		= __phys_to_pfn(S5P_PA_CHIPID),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_SYS,
-		.pfn		= __phys_to_pfn(S5P_PA_SYSCON),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_TIMER,
-		.pfn		= __phys_to_pfn(S5P_PA_TIMER),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_WATCHDOG,
-		.pfn		= __phys_to_pfn(S3C_PA_WDT),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_SROMC,
-		.pfn		= __phys_to_pfn(S5P_PA_SROMC),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-};
-
-/* read cpu identification code */
-
-void __init s5p_init_io(struct map_desc *mach_desc,
-			int size, void __iomem *cpuid_addr)
-{
-	/* initialize the io descriptors we need for initialization */
-	iotable_init(s5p_iodesc, ARRAY_SIZE(s5p_iodesc));
-	if (mach_desc)
-		iotable_init(mach_desc, size);
-
-	/* detect cpu id and rev. */
-	s5p_init_cpu(cpuid_addr);
-
-	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
-}
diff --git a/arch/arm/plat-s5p/irq-eint.c b/arch/arm/plat-s5p/irq-eint.c
index b5bb774..c496b35 100644
--- a/arch/arm/plat-s5p/irq-eint.c
+++ b/arch/arm/plat-s5p/irq-eint.c
@@ -14,7 +14,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/io.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/gpio.h>
 
 #include <asm/hardware/vic.h>
diff --git a/arch/arm/plat-s5p/s5p-time.c b/arch/arm/plat-s5p/s5p-time.c
index c833e7b..17c0a2c 100644
--- a/arch/arm/plat-s5p/s5p-time.c
+++ b/arch/arm/plat-s5p/s5p-time.c
@@ -10,7 +10,6 @@
  * published by the Free Software Foundation.
 */
 
-#include <linux/sched.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/err.h>
@@ -321,26 +320,14 @@ static void __iomem *s5p_timer_reg(void)
  * this wraps around for now, since it is just a relative time
  * stamp. (Inspired by U300 implementation.)
  */
-static DEFINE_CLOCK_DATA(cd);
-
-unsigned long long notrace sched_clock(void)
+static u32 notrace s5p_read_sched_clock(void)
 {
 	void __iomem *reg = s5p_timer_reg();
 
 	if (!reg)
 		return 0;
 
-	return cyc_to_sched_clock(&cd, ~__raw_readl(reg), (u32)~0);
-}
-
-static void notrace s5p_update_sched_clock(void)
-{
-	void __iomem *reg = s5p_timer_reg();
-
-	if (!reg)
-		return;
-
-	update_sched_clock(&cd, ~__raw_readl(reg), (u32)~0);
+	return ~__raw_readl(reg);
 }
 
 static void __init s5p_clocksource_init(void)
@@ -358,7 +345,7 @@ static void __init s5p_clocksource_init(void)
 	s5p_time_setup(timer_source.source_id, TCNT_MAX);
 	s5p_time_start(timer_source.source_id, PERIODIC);
 
-	init_sched_clock(&cd, s5p_update_sched_clock, 32, clock_rate);
+	setup_sched_clock(s5p_read_sched_clock, 32, clock_rate);
 
 	if (clocksource_mmio_init(s5p_timer_reg(), "s5p_clocksource_timer",
 			clock_rate, 250, 32, clocksource_mmio_readl_down))
diff --git a/arch/arm/plat-s5p/sysmmu.c b/arch/arm/plat-s5p/sysmmu.c
index e1cbc72..c8bec9c 100644
--- a/arch/arm/plat-s5p/sysmmu.c
+++ b/arch/arm/plat-s5p/sysmmu.c
@@ -11,6 +11,7 @@
 #include <linux/io.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/export.h>
 
 #include <asm/pgtable.h>
 
diff --git a/arch/arm/plat-samsung/clock-clksrc.c b/arch/arm/plat-samsung/clock-clksrc.c
index ae8b850..786a410 100644
--- a/arch/arm/plat-samsung/clock-clksrc.c
+++ b/arch/arm/plat-samsung/clock-clksrc.c
@@ -16,7 +16,7 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/clk.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/io.h>
 
 #include <plat/clock.h>
diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c
index 3b44519..10f7117 100644
--- a/arch/arm/plat-samsung/clock.c
+++ b/arch/arm/plat-samsung/clock.c
@@ -33,7 +33,7 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/clk.h>
diff --git a/arch/arm/plat-samsung/dev-backlight.c b/arch/arm/plat-samsung/dev-backlight.c
index e657305..a976c02 100644
--- a/arch/arm/plat-samsung/dev-backlight.c
+++ b/arch/arm/plat-samsung/dev-backlight.c
@@ -15,7 +15,6 @@
 #include <linux/slab.h>
 #include <linux/io.h>
 #include <linux/pwm_backlight.h>
-#include <linux/slab.h>
 
 #include <plat/devs.h>
 #include <plat/gpio-cfg.h>
diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
index dac4760..95509d8 100644
--- a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
+++ b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
@@ -202,14 +202,6 @@ extern int s3c_plltab_register(struct cpufreq_frequency_table *plls,
 extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void);
 extern struct s3c_iotimings *s3c_cpufreq_getiotimings(void);
 
-extern void s3c2410_iotiming_debugfs(struct seq_file *seq,
-				     struct s3c_cpufreq_config *cfg,
-				     union s3c_iobank *iob);
-
-extern void s3c2412_iotiming_debugfs(struct seq_file *seq,
-				     struct s3c_cpufreq_config *cfg,
-				     union s3c_iobank *iob);
-
 #ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
 #define s3c_cpufreq_debugfs_call(x) x
 #else
@@ -226,6 +218,10 @@ extern void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg);
 extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg);
 
 #ifdef CONFIG_S3C2410_IOTIMING
+extern void s3c2410_iotiming_debugfs(struct seq_file *seq,
+				     struct s3c_cpufreq_config *cfg,
+				     union s3c_iobank *iob);
+
 extern int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
 				 struct s3c_iotimings *iot);
 
@@ -235,6 +231,7 @@ extern int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg,
 extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
 				 struct s3c_iotimings *iot);
 #else
+#define s3c2410_iotiming_debugfs NULL
 #define s3c2410_iotiming_calc NULL
 #define s3c2410_iotiming_get NULL
 #define s3c2410_iotiming_set NULL
@@ -242,8 +239,10 @@ extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
 
 /* S3C2412 compatible routines */
 
-extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
-				struct s3c_iotimings *timings);
+#ifdef CONFIG_S3C2412_IOTIMING
+extern void s3c2412_iotiming_debugfs(struct seq_file *seq,
+				     struct s3c_cpufreq_config *cfg,
+				     union s3c_iobank *iob);
 
 extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
 				struct s3c_iotimings *timings);
@@ -253,6 +252,12 @@ extern int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
 
 extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
 				 struct s3c_iotimings *iot);
+#else
+#define s3c2412_iotiming_debugfs NULL
+#define s3c2412_iotiming_calc NULL
+#define s3c2412_iotiming_get NULL
+#define s3c2412_iotiming_set NULL
+#endif /* CONFIG_S3C2412_IOTIMING */
 
 #ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUG
 #define s3c_freq_dbg(x...) printk(KERN_INFO x)
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index 40fd7b6..73cb3cf 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -152,13 +152,9 @@ extern void s3c_init_cpu(unsigned long idcode,
 /* core initialisation functions */
 
 extern void s3c24xx_init_irq(void);
-extern void s3c64xx_init_irq(u32 vic0, u32 vic1);
 extern void s5p_init_irq(u32 *vic, u32 num_vic);
 
 extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
-extern void s3c64xx_init_io(struct map_desc *mach_desc, int size);
-extern void s5p_init_io(struct map_desc *mach_desc,
-			int size, void __iomem *cpuid_addr);
 
 extern void s3c24xx_init_cpu(void);
 extern void s3c64xx_init_cpu(void);
@@ -183,22 +179,20 @@ extern struct syscore_ops s3c2410_pm_syscore_ops;
 extern struct syscore_ops s3c2412_pm_syscore_ops;
 extern struct syscore_ops s3c2416_pm_syscore_ops;
 extern struct syscore_ops s3c244x_pm_syscore_ops;
-extern struct syscore_ops s3c64xx_irq_syscore_ops;
-
-/* system device classes */
-
-extern struct sysdev_class s3c2410_sysclass;
-extern struct sysdev_class s3c2410a_sysclass;
-extern struct sysdev_class s3c2412_sysclass;
-extern struct sysdev_class s3c2416_sysclass;
-extern struct sysdev_class s3c2440_sysclass;
-extern struct sysdev_class s3c2442_sysclass;
-extern struct sysdev_class s3c2443_sysclass;
-extern struct sysdev_class s3c6410_sysclass;
-extern struct sysdev_class s3c64xx_sysclass;
-extern struct sysdev_class s5p64x0_sysclass;
-extern struct sysdev_class s5pv210_sysclass;
-extern struct sysdev_class exynos4_sysclass;
+
+/* system device subsystems */
+
+extern struct bus_type s3c2410_subsys;
+extern struct bus_type s3c2410a_subsys;
+extern struct bus_type s3c2412_subsys;
+extern struct bus_type s3c2416_subsys;
+extern struct bus_type s3c2440_subsys;
+extern struct bus_type s3c2442_subsys;
+extern struct bus_type s3c2443_subsys;
+extern struct bus_type s3c6410_subsys;
+extern struct bus_type s5p64x0_subsys;
+extern struct bus_type s5pv210_subsys;
+extern struct bus_type exynos4_subsys;
 
 extern void (*s5pc1xx_idle)(void);
 
diff --git a/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
index 1c1ed54..d015763 100644
--- a/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
+++ b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
@@ -12,7 +12,7 @@
 
 #include <plat/dma-core.h>
 
-extern struct sysdev_class dma_sysclass;
+extern struct bus_type dma_subsys;
 extern struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS];
 
 #define DMA_CH_VALID		(1<<31)
diff --git a/arch/arm/plat-samsung/include/plat/exynos4.h b/arch/arm/plat-samsung/include/plat/exynos4.h
deleted file mode 100644
index f546e88..0000000
--- a/arch/arm/plat-samsung/include/plat/exynos4.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/exynos4.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Header file for exynos4 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Common init code for EXYNOS4 related SoCs */
-
-extern void exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void exynos4_register_clocks(void);
-extern void exynos4210_register_clocks(void);
-extern void exynos4212_register_clocks(void);
-extern void exynos4_setup_clocks(void);
-
-#ifdef CONFIG_ARCH_EXYNOS
-extern  int exynos_init(void);
-extern void exynos4_init_irq(void);
-extern void exynos4_map_io(void);
-extern void exynos4_init_clocks(int xtal);
-extern struct sys_timer exynos4_timer;
-
-#define exynos4_init_uarts exynos4_common_init_uarts
-
-#else
-#define exynos4_init_clocks NULL
-#define exynos4_init_uarts NULL
-#define exynos4_map_io NULL
-#define exynos_init NULL
-#endif
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
index d48245b..df8155b 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
@@ -24,6 +24,8 @@
 #ifndef __PLAT_GPIO_CFG_H
 #define __PLAT_GPIO_CFG_H __FILE__
 
+#include<linux/types.h>
+
 typedef unsigned int __bitwise__ samsung_gpio_pull_t;
 typedef unsigned int __bitwise__ s5p_gpio_drvstr_t;
 
diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h
index dcf6870..61fc537 100644
--- a/arch/arm/plat-samsung/include/plat/pm.h
+++ b/arch/arm/plat-samsung/include/plat/pm.h
@@ -17,11 +17,12 @@
 
 #include <linux/irq.h>
 
-struct sys_device;
+struct device;
 
 #ifdef CONFIG_PM
 
 extern __init int s3c_pm_init(void);
+extern __init int s3c64xx_pm_init(void);
 
 #else
 
@@ -29,6 +30,11 @@ static inline int s3c_pm_init(void)
 {
 	return 0;
 }
+
+static inline int s3c64xx_pm_init(void)
+{
+	return 0;
+}
 #endif
 
 /* configuration for the IRQ mask over sleep */
diff --git a/arch/arm/plat-samsung/include/plat/reset.h b/arch/arm/plat-samsung/include/plat/reset.h
deleted file mode 100644
index 32ca517..0000000
--- a/arch/arm/plat-samsung/include/plat/reset.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/reset.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_SAMSUNG_RESET_H
-#define __PLAT_SAMSUNG_RESET_H __FILE__
-
-extern void (*s5p_reset_hook)(void);
-
-#endif /* __PLAT_SAMSUNG_RESET_H */
diff --git a/arch/arm/plat-samsung/include/plat/s3c2412.h b/arch/arm/plat-samsung/include/plat/s3c2412.h
index 5bcfd14..cbae50d 100644
--- a/arch/arm/plat-samsung/include/plat/s3c2412.h
+++ b/arch/arm/plat-samsung/include/plat/s3c2412.h
@@ -21,9 +21,12 @@ extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 extern void s3c2412_init_clocks(int xtal);
 
 extern  int s3c2412_baseclk_add(void);
+
+extern void s3c2412_restart(char mode, const char *cmd);
 #else
 #define s3c2412_init_clocks NULL
 #define s3c2412_init_uarts NULL
 #define s3c2412_map_io NULL
 #define s3c2412_init NULL
+#define s3c2412_restart NULL
 #endif
diff --git a/arch/arm/plat-samsung/include/plat/s3c2416.h b/arch/arm/plat-samsung/include/plat/s3c2416.h
index a764f85..de2b5bd 100644
--- a/arch/arm/plat-samsung/include/plat/s3c2416.h
+++ b/arch/arm/plat-samsung/include/plat/s3c2416.h
@@ -23,9 +23,11 @@ extern void s3c2416_init_clocks(int xtal);
 
 extern  int s3c2416_baseclk_add(void);
 
+extern void s3c2416_restart(char mode, const char *cmd);
 #else
 #define s3c2416_init_clocks NULL
 #define s3c2416_init_uarts NULL
 #define s3c2416_map_io NULL
 #define s3c2416_init NULL
+#define s3c2416_restart NULL
 #endif
diff --git a/arch/arm/plat-samsung/include/plat/s3c2443.h b/arch/arm/plat-samsung/include/plat/s3c2443.h
index 7fae1a0..dce05b4 100644
--- a/arch/arm/plat-samsung/include/plat/s3c2443.h
+++ b/arch/arm/plat-samsung/include/plat/s3c2443.h
@@ -24,11 +24,13 @@ extern void s3c2443_init_clocks(int xtal);
 
 extern  int s3c2443_baseclk_add(void);
 
+extern void s3c2443_restart(char mode, const char *cmd);
 #else
 #define s3c2443_init_clocks NULL
 #define s3c2443_init_uarts NULL
 #define s3c2443_map_io NULL
 #define s3c2443_init NULL
+#define s3c2443_restart NULL
 #endif
 
 /* common code used by s3c2443 and others.
diff --git a/arch/arm/plat-samsung/include/plat/s3c6400.h b/arch/arm/plat-samsung/include/plat/s3c6400.h
deleted file mode 100644
index 37d428a..0000000
--- a/arch/arm/plat-samsung/include/plat/s3c6400.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s3c6400.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * Header file for s3c6400 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Common init code for S3C6400 related SoCs */
-
-extern void s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s3c6400_setup_clocks(void);
-
-extern void s3c64xx_register_clocks(unsigned long xtal, unsigned armclk_limit);
-
-#ifdef CONFIG_CPU_S3C6400
-
-extern  int s3c6400_init(void);
-extern void s3c6400_init_irq(void);
-extern void s3c6400_map_io(void);
-extern void s3c6400_init_clocks(int xtal);
-
-#define s3c6400_init_uarts s3c6400_common_init_uarts
-
-#else
-#define s3c6400_init_clocks NULL
-#define s3c6400_init_uarts NULL
-#define s3c6400_map_io NULL
-#define s3c6400_init NULL
-#endif
diff --git a/arch/arm/plat-samsung/include/plat/s3c6410.h b/arch/arm/plat-samsung/include/plat/s3c6410.h
deleted file mode 100644
index 20a6675..0000000
--- a/arch/arm/plat-samsung/include/plat/s3c6410.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s3c6410.h
- *
- * Copyright 2008 Openmoko,  Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * Header file for s3c6410 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C6410
-
-extern  int s3c6410_init(void);
-extern void s3c6410_init_irq(void);
-extern void s3c6410_map_io(void);
-extern void s3c6410_init_clocks(int xtal);
-
-#define s3c6410_init_uarts s3c6400_common_init_uarts
-
-#else
-#define s3c6410_init_clocks NULL
-#define s3c6410_init_uarts NULL
-#define s3c6410_map_io NULL
-#define s3c6410_init NULL
-#endif
diff --git a/arch/arm/plat-samsung/include/plat/s5p6440.h b/arch/arm/plat-samsung/include/plat/s5p6440.h
deleted file mode 100644
index bf85ebb..0000000
--- a/arch/arm/plat-samsung/include/plat/s5p6440.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s5p6440.h
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Header file for s5p6440 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
- /* Common init code for S5P6440 related SoCs */
-
-extern void s5p6440_register_clocks(void);
-extern void s5p6440_setup_clocks(void);
-
-#ifdef CONFIG_CPU_S5P6440
-
-extern  int s5p64x0_init(void);
-extern void s5p6440_init_irq(void);
-extern void s5p6440_map_io(void);
-extern void s5p6440_init_clocks(int xtal);
-
-extern void s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-#else
-#define s5p6440_init_clocks NULL
-#define s5p6440_init_uarts NULL
-#define s5p6440_map_io NULL
-#define s5p64x0_init NULL
-#endif
-
-/* S5P6440 timer */
-
-extern struct sys_timer s5p6440_timer;
diff --git a/arch/arm/plat-samsung/include/plat/s5p6450.h b/arch/arm/plat-samsung/include/plat/s5p6450.h
deleted file mode 100644
index da25f9a..0000000
--- a/arch/arm/plat-samsung/include/plat/s5p6450.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s5p6450.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Header file for s5p6450 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Common init code for S5P6450 related SoCs */
-
-extern void s5p6450_register_clocks(void);
-extern void s5p6450_setup_clocks(void);
-
-#ifdef CONFIG_CPU_S5P6450
-
-extern  int s5p64x0_init(void);
-extern void s5p6450_init_irq(void);
-extern void s5p6450_map_io(void);
-extern void s5p6450_init_clocks(int xtal);
-
-extern void s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-#else
-#define s5p6450_init_clocks NULL
-#define s5p6450_init_uarts NULL
-#define s5p6450_map_io NULL
-#define s5p64x0_init NULL
-#endif
-
-/* S5P6450 timer */
-
-extern struct sys_timer s5p6450_timer;
diff --git a/arch/arm/plat-samsung/include/plat/s5pc100.h b/arch/arm/plat-samsung/include/plat/s5pc100.h
deleted file mode 100644
index 9a21aea..0000000
--- a/arch/arm/plat-samsung/include/plat/s5pc100.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s5pc100.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Header file for s5pc100 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Common init code for S5PC100 related SoCs */
-
-extern void s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s5pc100_register_clocks(void);
-extern void s5pc100_setup_clocks(void);
-
-#ifdef CONFIG_CPU_S5PC100
-
-extern  int s5pc100_init(void);
-extern void s5pc100_init_irq(void);
-extern void s5pc100_map_io(void);
-extern void s5pc100_init_clocks(int xtal);
-
-#define s5pc100_init_uarts s5pc100_common_init_uarts
-
-#else
-#define s5pc100_init_clocks NULL
-#define s5pc100_init_uarts NULL
-#define s5pc100_map_io NULL
-#define s5pc100_init NULL
-#endif
diff --git a/arch/arm/plat-samsung/include/plat/s5pv210.h b/arch/arm/plat-samsung/include/plat/s5pv210.h
deleted file mode 100644
index b4bc6be7..0000000
--- a/arch/arm/plat-samsung/include/plat/s5pv210.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s5pv210.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Header file for s5pv210 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Common init code for S5PV210 related SoCs */
-
-extern void s5pv210_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s5pv210_register_clocks(void);
-extern void s5pv210_setup_clocks(void);
-
-#ifdef CONFIG_CPU_S5PV210
-
-extern  int s5pv210_init(void);
-extern void s5pv210_init_irq(void);
-extern void s5pv210_map_io(void);
-extern void s5pv210_init_clocks(int xtal);
-
-#define s5pv210_init_uarts s5pv210_common_init_uarts
-
-#else
-#define s5pv210_init_clocks NULL
-#define s5pv210_init_uarts NULL
-#define s5pv210_map_io NULL
-#define s5pv210_init NULL
-#endif
diff --git a/arch/arm/plat-samsung/include/plat/system-reset.h b/arch/arm/plat-samsung/include/plat/system-reset.h
deleted file mode 100644
index a448e990..0000000
--- a/arch/arm/plat-samsung/include/plat/system-reset.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/system-reset.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Based on arch/arm/mach-s3c2410/include/mach/system-reset.h
- *
- * S5P - System define for arch_reset()
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <plat/watchdog-reset.h>
-
-void (*s5p_reset_hook)(void);
-
-static void arch_reset(char mode, const char *cmd)
-{
-	/* SWRESET support in s5p_reset_hook() */
-
-	if (s5p_reset_hook)
-		s5p_reset_hook();
-
-	/* Perform reset using Watchdog reset
-	 * if there is no s5p_reset_hook()
-	 */
-
-	arch_wdt_reset();
-}
diff --git a/arch/arm/plat-samsung/include/plat/watchdog-reset.h b/arch/arm/plat-samsung/include/plat/watchdog-reset.h
index 40dbb2b..f19aff1 100644
--- a/arch/arm/plat-samsung/include/plat/watchdog-reset.h
+++ b/arch/arm/plat-samsung/include/plat/watchdog-reset.h
@@ -17,6 +17,7 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
+#include <linux/delay.h>
 
 static inline void arch_wdt_reset(void)
 {
diff --git a/arch/arm/plat-samsung/pd.c b/arch/arm/plat-samsung/pd.c
index efe1d56..312b510 100644
--- a/arch/arm/plat-samsung/pd.c
+++ b/arch/arm/plat-samsung/pd.c
@@ -11,7 +11,7 @@
 */
 
 #include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/platform_device.h>
 #include <linux/err.h>
 #include <linux/pm_runtime.h>
diff --git a/arch/arm/plat-samsung/pm-gpio.c b/arch/arm/plat-samsung/pm-gpio.c
index 4be016e..c2ff92c 100644
--- a/arch/arm/plat-samsung/pm-gpio.c
+++ b/arch/arm/plat-samsung/pm-gpio.c
@@ -14,7 +14,7 @@
 */
 
 #include <linux/kernel.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
diff --git a/arch/arm/plat-samsung/pwm.c b/arch/arm/plat-samsung/pwm.c
index dc1185d..c559d84 100644
--- a/arch/arm/plat-samsung/pwm.c
+++ b/arch/arm/plat-samsung/pwm.c
@@ -11,7 +11,7 @@
  * the Free Software Foundation; either version 2 of the License.
 */
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
diff --git a/arch/arm/plat-samsung/wakeup-mask.c b/arch/arm/plat-samsung/wakeup-mask.c
index dc81403..20c3d91 100644
--- a/arch/arm/plat-samsung/wakeup-mask.c
+++ b/arch/arm/plat-samsung/wakeup-mask.c
@@ -11,7 +11,7 @@
 
 #include <linux/kernel.h>
 #include <linux/spinlock.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/types.h>
 #include <linux/irq.h>
 #include <linux/io.h>
diff --git a/arch/arm/plat-spear/Makefile b/arch/arm/plat-spear/Makefile
index b4f340b..e0f2e5b 100644
--- a/arch/arm/plat-spear/Makefile
+++ b/arch/arm/plat-spear/Makefile
@@ -3,6 +3,6 @@
 #
 
 # Common support
-obj-y	:= clock.o time.o
+obj-y	:= clock.o restart.o time.o
 
 obj-$(CONFIG_ARCH_SPEAR3XX)	+= shirq.o padmux.o
diff --git a/arch/arm/plat-spear/include/plat/system.h b/arch/arm/plat-spear/include/plat/system.h
index a235fa0..86c6f83 100644
--- a/arch/arm/plat-spear/include/plat/system.h
+++ b/arch/arm/plat-spear/include/plat/system.h
@@ -14,10 +14,6 @@
 #ifndef __PLAT_SYSTEM_H
 #define __PLAT_SYSTEM_H
 
-#include <linux/io.h>
-#include <asm/hardware/sp810.h>
-#include <mach/hardware.h>
-
 static inline void arch_idle(void)
 {
 	/*
@@ -27,15 +23,4 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode, const char *cmd)
-{
-	if (mode == 's') {
-		/* software reset, Jump into ROM at address 0 */
-		cpu_reset(0);
-	} else {
-		/* hardware reset, Use on-chip reset capability */
-		sysctl_soft_reset((void __iomem *)VA_SPEAR_SYS_CTRL_BASE);
-	}
-}
-
 #endif /* __PLAT_SYSTEM_H */
diff --git a/arch/arm/plat-spear/include/plat/vmalloc.h b/arch/arm/plat-spear/include/plat/vmalloc.h
deleted file mode 100644
index 8c8b24d..0000000
--- a/arch/arm/plat-spear/include/plat/vmalloc.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/vmalloc.h
- *
- * Defining Vmalloc area for SPEAr platform
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_VMALLOC_H
-#define __PLAT_VMALLOC_H
-
-#define VMALLOC_END		0xF0000000UL
-
-#endif /* __PLAT_VMALLOC_H */
diff --git a/arch/arm/plat-spear/restart.c b/arch/arm/plat-spear/restart.c
new file mode 100644
index 0000000..2b4e3d8
--- /dev/null
+++ b/arch/arm/plat-spear/restart.c
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/plat-spear/restart.c
+ *
+ * SPEAr platform specific restart functions
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/io.h>
+#include <asm/hardware/sp810.h>
+#include <mach/hardware.h>
+#include <mach/generic.h>
+
+void spear_restart(char mode, const char *cmd)
+{
+	if (mode == 's') {
+		/* software reset, Jump into ROM at address 0 */
+		soft_restart(0);
+	} else {
+		/* hardware reset, Use on-chip reset capability */
+		sysctl_soft_reset((void __iomem *)VA_SPEAR_SYS_CTRL_BASE);
+	}
+}
diff --git a/arch/arm/plat-tcc/Kconfig b/arch/arm/plat-tcc/Kconfig
deleted file mode 100644
index 1bf4995..0000000
--- a/arch/arm/plat-tcc/Kconfig
+++ /dev/null
@@ -1,20 +0,0 @@
-if ARCH_TCC_926
-
-menu "Telechips ARM926-based CPUs"
-
-choice
-	prompt "Telechips CPU type:"
-	default ARCH_TCC8K
-
-config ARCH_TCC8K
-	bool TCC8000
-	select USB_ARCH_HAS_OHCI
-	help
-	  Support for Telechips TCC8000 systems
-
-endchoice
-
-source "arch/arm/mach-tcc8k/Kconfig"
-
-endmenu
-endif
diff --git a/arch/arm/plat-tcc/Makefile b/arch/arm/plat-tcc/Makefile
deleted file mode 100644
index eceabc8..0000000
--- a/arch/arm/plat-tcc/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-# "Telechips Platform Common Modules"
-
-obj-y := clock.o system.o
diff --git a/arch/arm/plat-tcc/clock.c b/arch/arm/plat-tcc/clock.c
deleted file mode 100644
index f3ced10..0000000
--- a/arch/arm/plat-tcc/clock.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * Clock framework for Telechips SoCs
- * Based on arch/arm/plat-mxc/clock.c
- *
- * Copyright (C) 2004 - 2005 Nokia corporation
- * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
- * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- * Copyright 2010 Hans J. Koch, hjk@linutronix.de
- *
- * Licensed under the terms of the GPL v2.
- */
-
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/string.h>
-
-#include <mach/clock.h>
-#include <mach/hardware.h>
-
-static DEFINE_MUTEX(clocks_mutex);
-
-/*-------------------------------------------------------------------------
- * Standard clock functions defined in include/linux/clk.h
- *-------------------------------------------------------------------------*/
-
-static void __clk_disable(struct clk *clk)
-{
-	BUG_ON(clk->refcount == 0);
-
-	if (!(--clk->refcount) && clk->disable) {
-		/* Unconditionally disable the clock in hardware */
-		clk->disable(clk);
-		/* recursively disable parents */
-		if (clk->parent)
-			__clk_disable(clk->parent);
-	}
-}
-
-static int __clk_enable(struct clk *clk)
-{
-	int ret = 0;
-
-	if (clk->refcount++ == 0 && clk->enable) {
-		if (clk->parent)
-			ret = __clk_enable(clk->parent);
-		if (ret)
-			return ret;
-		else
-			return clk->enable(clk);
-	}
-
-	return 0;
-}
-
-/* This function increments the reference count on the clock and enables the
- * clock if not already enabled. The parent clock tree is recursively enabled
- */
-int clk_enable(struct clk *clk)
-{
-	int ret = 0;
-
-	if (!clk)
-		return -EINVAL;
-
-	mutex_lock(&clocks_mutex);
-	ret = __clk_enable(clk);
-	mutex_unlock(&clocks_mutex);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(clk_enable);
-
-/* This function decrements the reference count on the clock and disables
- * the clock when reference count is 0. The parent clock tree is
- * recursively disabled
- */
-void clk_disable(struct clk *clk)
-{
-	if (!clk)
-		return;
-
-	mutex_lock(&clocks_mutex);
-	__clk_disable(clk);
-	mutex_unlock(&clocks_mutex);
-}
-EXPORT_SYMBOL_GPL(clk_disable);
-
-/* Retrieve the *current* clock rate. If the clock itself
- * does not provide a special calculation routine, ask
- * its parent and so on, until one is able to return
- * a valid clock rate
- */
-unsigned long clk_get_rate(struct clk *clk)
-{
-	if (!clk)
-		return 0UL;
-
-	if (clk->get_rate)
-		return clk->get_rate(clk);
-
-	return clk_get_rate(clk->parent);
-}
-EXPORT_SYMBOL_GPL(clk_get_rate);
-
-/* Round the requested clock rate to the nearest supported
- * rate that is less than or equal to the requested rate.
- * This is dependent on the clock's current parent.
- */
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	if (!clk)
-		return 0;
-	if (!clk->round_rate)
-		return 0;
-
-	return clk->round_rate(clk, rate);
-}
-EXPORT_SYMBOL_GPL(clk_round_rate);
-
-/* Set the clock to the requested clock rate. The rate must
- * match a supported rate exactly based on what clk_round_rate returns
- */
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret = -EINVAL;
-
-	if (!clk)
-		return ret;
-	if (!clk->set_rate || !rate)
-		return ret;
-
-	mutex_lock(&clocks_mutex);
-	ret = clk->set_rate(clk, rate);
-	mutex_unlock(&clocks_mutex);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(clk_set_rate);
-
-/* Set the clock's parent to another clock source */
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	struct clk *old;
-	int ret = -EINVAL;
-
-	if (!clk)
-		return ret;
-	if (!clk->set_parent || !parent)
-		return ret;
-
-	mutex_lock(&clocks_mutex);
-	old = clk->parent;
-	if (clk->refcount)
-		__clk_enable(parent);
-	ret = clk->set_parent(clk, parent);
-	if (ret)
-		old = parent;
-	if (clk->refcount)
-		__clk_disable(old);
-	mutex_unlock(&clocks_mutex);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(clk_set_parent);
-
-/* Retrieve the clock's parent clock source */
-struct clk *clk_get_parent(struct clk *clk)
-{
-	if (!clk)
-		return NULL;
-
-	return clk->parent;
-}
-EXPORT_SYMBOL_GPL(clk_get_parent);
diff --git a/arch/arm/plat-tcc/include/mach/clock.h b/arch/arm/plat-tcc/include/mach/clock.h
deleted file mode 100644
index a12f58a..0000000
--- a/arch/arm/plat-tcc/include/mach/clock.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Low level clock header file for Telechips TCC architecture
- * (C) 2010 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the GPL v2.
- */
-
-#ifndef __ASM_ARCH_TCC_CLOCK_H__
-#define __ASM_ARCH_TCC_CLOCK_H__
-
-#ifndef __ASSEMBLY__
-
-struct clk {
-	struct clk *parent;
-	/* id number of a root clock, 0 for normal clocks */
-	int root_id;
-	/* Reference count of clock enable/disable */
-	int refcount;
-	/* Address of associated BCLKCTRx register. Must be set. */
-	void __iomem *bclkctr;
-	/* Bit position for BCLKCTRx. Must be set. */
-	int bclk_shift;
-	/* Address of ACLKxxx register, if any. */
-	void __iomem *aclkreg;
-	/* get the current clock rate (always a fresh value) */
-	unsigned long (*get_rate) (struct clk *);
-	/* Function ptr to set the clock to a new rate. The rate must match a
-	   supported rate returned from round_rate. Leave blank if clock is not
-	   programmable */
-	int (*set_rate) (struct clk *, unsigned long);
-	/* Function ptr to round the requested clock rate to the nearest
-	   supported rate that is less than or equal to the requested rate. */
-	unsigned long (*round_rate) (struct clk *, unsigned long);
-	/* Function ptr to enable the clock. Leave blank if clock can not
-	   be gated. */
-	int (*enable) (struct clk *);
-	/* Function ptr to disable the clock. Leave blank if clock can not
-	   be gated. */
-	void (*disable) (struct clk *);
-	/* Function ptr to set the parent clock of the clock. */
-	int (*set_parent) (struct clk *, struct clk *);
-};
-
-int clk_register(struct clk *clk);
-void clk_unregister(struct clk *clk);
-
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_ARCH_MXC_CLOCK_H__ */
diff --git a/arch/arm/plat-tcc/include/mach/debug-macro.S b/arch/arm/plat-tcc/include/mach/debug-macro.S
deleted file mode 100644
index cf17d04..0000000
--- a/arch/arm/plat-tcc/include/mach/debug-macro.S
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Copyright (C) 1994-1999 Russell King
- * Copyright (C) 2008-2009 Telechips
- * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-		.macro	addruart, rp, rv, tmp
-		moveq	\rp, #0x90000000	@ physical base address
-		movne	\rv, #0xF1000000	@ virtual base
-		orr	\rp, \rp, #0x00007000	@ UART0
-		orr	\rv, \rv, #0x00007000	@ UART0
-		.endm
-
-		.macro	senduart,rd,rx
-		strb	\rd, [\rx, #0x44]
-		.endm
-
-		.macro	waituart,rd,rx
-		.endm
-
-		.macro	busyuart,rd,rx
-1001:
-		ldr \rd, [\rx, #0x14]
-		tst \rd, #0x20
-
-		beq 1001b
-		.endm
diff --git a/arch/arm/plat-tcc/include/mach/entry-macro.S b/arch/arm/plat-tcc/include/mach/entry-macro.S
deleted file mode 100644
index 748f401..0000000
--- a/arch/arm/plat-tcc/include/mach/entry-macro.S
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * include/asm-arm/arch-tcc83x/entry-macro.S
- *
- * Author : <linux@telechips.com>
- * Created: June 10, 2008
- * Description: Low-level IRQ helper macros for Telechips-based platforms
- *
- * Copyright (C) 2008-2009 Telechips
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-
-	.macro	disable_fiq
-	.endm
-
-	.macro  get_irqnr_preamble, base, tmp
-	.endm
-
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-		ldr	\base, =0xF2003000 @ base address of PIC registers
-
-		@@ read MREQ register of PIC0
-
-		mov	\irqnr, #0
-		ldr	\irqstat, [\base, #0x00000014 ]	@ lower 32 interrupts
-		cmp	\irqstat, #0
-		bne	1001f
-
-		@@ read MREQ register of PIC1
-
-		ldr	\irqstat, [\base, #0x00000094]	@ upper 32 interrupts
-		cmp	\irqstat, #0
-		beq	1002f
-		mov	\irqnr, #0x20
-
-1001:
-		movs	\tmp, \irqstat, lsl #16
-		movne	\irqstat, \tmp
-		addeq	\irqnr, \irqnr, #16
-
-		movs	\tmp, \irqstat, lsl #8
-		movne	\irqstat, \tmp
-		addeq	\irqnr, \irqnr, #8
-
-		movs	\tmp, \irqstat, lsl #4
-		movne	\irqstat, \tmp
-		addeq	\irqnr, \irqnr, #4
-
-		movs	\tmp, \irqstat, lsl #2
-		movne	\irqstat, \tmp
-		addeq	\irqnr, \irqnr, #2
-
-		movs	\tmp, \irqstat, lsl #1
-		addeq	\irqnr, \irqnr, #1
-		orrs	\base, \base, #1
-1002:
-		@@ exit here, Z flag unset if IRQ
-
-	.endm
diff --git a/arch/arm/plat-tcc/include/mach/hardware.h b/arch/arm/plat-tcc/include/mach/hardware.h
deleted file mode 100644
index e70d126..0000000
--- a/arch/arm/plat-tcc/include/mach/hardware.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
- * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
- *                          and Dirk Behme <dirk.behme@de.bosch.com>
- * Rewritten by:    <linux@telechips.com>
- * Description: Hardware definitions for TCC8300 processors and boards
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Copyright (C) 2008-2009 Telechips
- *
- * Modifications for mainline (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GNU Pulic License version 2.
- */
-
-#ifndef __ASM_ARCH_TCC_HARDWARE_H
-#define __ASM_ARCH_TCC_HARDWARE_H
-
-#include <asm/sizes.h>
-#ifndef __ASSEMBLER__
-#include <asm/types.h>
-#endif
-#include <mach/io.h>
-
-/*
- * ----------------------------------------------------------------------------
- * Clocks
- * ----------------------------------------------------------------------------
- */
-#define CLKGEN_REG_BASE		0xfffece00
-#define ARM_CKCTL		(CLKGEN_REG_BASE + 0x0)
-#define ARM_IDLECT1		(CLKGEN_REG_BASE + 0x4)
-#define ARM_IDLECT2		(CLKGEN_REG_BASE + 0x8)
-#define ARM_EWUPCT		(CLKGEN_REG_BASE + 0xC)
-#define ARM_RSTCT1		(CLKGEN_REG_BASE + 0x10)
-#define ARM_RSTCT2		(CLKGEN_REG_BASE + 0x14)
-#define ARM_SYSST		(CLKGEN_REG_BASE + 0x18)
-#define ARM_IDLECT3		(CLKGEN_REG_BASE + 0x24)
-
-/* DPLL control registers */
-#define DPLL_CTL		0xfffecf00
-
-#endif	/* __ASM_ARCH_TCC_HARDWARE_H */
diff --git a/arch/arm/plat-tcc/include/mach/io.h b/arch/arm/plat-tcc/include/mach/io.h
deleted file mode 100644
index 3e911d3..0000000
--- a/arch/arm/plat-tcc/include/mach/io.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * IO definitions for TCC8000 processors and boards
- *
- * Copyright (C) 1997-1999 Russell King
- * Copyright (C) 2008-2009 Telechips
- * Copyright (C) 2010 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GNU Public License version 2.
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We don't actually have real ISA nor PCI buses, but there is so many
- * drivers out there that might just work if we fake them...
- */
-#define __io(a)			__typesafe_io(a)
-#define __mem_pci(a)		(a)
-
-#endif
diff --git a/arch/arm/plat-tcc/include/mach/irqs.h b/arch/arm/plat-tcc/include/mach/irqs.h
deleted file mode 100644
index da86389..0000000
--- a/arch/arm/plat-tcc/include/mach/irqs.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * IRQ definitions for TCC8xxx
- *
- * Copyright (C) 2008-2009 Telechips
- * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GPL v2.
- *
- */
-
-#ifndef __ASM_ARCH_TCC_IRQS_H
-#define __ASM_ARCH_TCC_IRQS_H
-
-#define NR_IRQS 64
-
-/* PIC0 interrupts */
-#define INT_ADMA1	0
-#define INT_BDMA	1
-#define INT_ADMA0	2
-#define INT_GDMA1	3
-#define INT_I2S0RX	4
-#define INT_I2S0TX	5
-#define INT_TC		6
-#define INT_UART0	7
-#define INT_USBD	8
-#define INT_SPI0TX	9
-#define INT_UDMA	10
-#define INT_LIRQ	11
-#define INT_GDMA2	12
-#define INT_GDMA0	13
-#define INT_TC32	14
-#define INT_LCD		15
-#define INT_ADC		16
-#define INT_I2C		17
-#define INT_RTCP	18
-#define INT_RTCA	19
-#define INT_NFC		20
-#define INT_SD0		21
-#define INT_GSB0	22
-#define INT_PK		23
-#define INT_USBH0	24
-#define INT_USBH1	25
-#define INT_G2D		26
-#define INT_ECC		27
-#define INT_SPI0RX	28
-#define INT_UART1	29
-#define INT_MSCL	30
-#define INT_GSB1	31
-/* PIC1 interrupts */
-#define INT_E0		32
-#define INT_E1		33
-#define INT_E2		34
-#define INT_E3		35
-#define INT_E4		36
-#define INT_E5		37
-#define INT_E6		38
-#define INT_E7		39
-#define INT_UART2	40
-#define INT_UART3	41
-#define INT_SPI1TX	42
-#define INT_SPI1RX	43
-#define INT_GSB2	44
-#define INT_SPDIF	45
-#define INT_CDIF	46
-#define INT_VBON	47
-#define INT_VBOFF	48
-#define INT_SD1		49
-#define INT_UART4	50
-#define INT_GDMA3	51
-#define INT_I2S1RX	52
-#define INT_I2S1TX	53
-#define INT_CAN0	54
-#define INT_CAN1	55
-#define INT_GSB3	56
-#define INT_KRST	57
-#define INT_UNUSED	58
-#define INT_SD0D3	59
-#define INT_SD1D3	60
-#define INT_GPS0	61
-#define INT_GPS1	62
-#define INT_GPS2	63
-
-#endif  /* ASM_ARCH_TCC_IRQS_H */
diff --git a/arch/arm/plat-tcc/include/mach/system.h b/arch/arm/plat-tcc/include/mach/system.h
deleted file mode 100644
index 909e603..0000000
--- a/arch/arm/plat-tcc/include/mach/system.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Author: <linux@telechips.com>
- * Created: June 10, 2008
- * Description: LINUX SYSTEM FUNCTIONS for TCC83x
- *
- * Copyright (C) 2008-2009 Telechips
- *
- * Licensed under the terms of the GPL v2.
- *
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-#include <linux/clk.h>
-
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-
-extern void plat_tcc_reboot(void);
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode, const char *cmd)
-{
-	plat_tcc_reboot();
-}
-
-#endif
diff --git a/arch/arm/plat-tcc/include/mach/tcc8k-regs.h b/arch/arm/plat-tcc/include/mach/tcc8k-regs.h
deleted file mode 100644
index 1d94282..0000000
--- a/arch/arm/plat-tcc/include/mach/tcc8k-regs.h
+++ /dev/null
@@ -1,807 +0,0 @@
-/*
- * Telechips TCC8000 register definitions
- *
- * (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GPLv2.
- */
-
-#ifndef TCC8K_REGS_H
-#define TCC8K_REGS_H
-
-#include <linux/types.h>
-
-#define EXT_SDRAM_BASE		0x20000000
-#define INT_SRAM_BASE		0x30000000
-#define INT_SRAM_SIZE		SZ_32K
-#define CS0_BASE		0x40000000
-#define CS1_BASE		0x50000000
-#define CS1_SIZE		SZ_64K
-#define CS2_BASE		0x60000000
-#define CS3_BASE		0x70000000
-#define AHB_PERI_BASE		0x80000000
-#define AHB_PERI_SIZE		SZ_64K
-#define APB0_PERI_BASE		0x90000000
-#define APB0_PERI_SIZE		SZ_128K
-#define APB1_PERI_BASE		0x98000000
-#define APB1_PERI_SIZE		SZ_128K
-#define DATA_TCM_BASE		0xa0000000
-#define DATA_TCM_SIZE		SZ_8K
-#define EXT_MEM_CTRL_BASE	0xf0000000
-#define EXT_MEM_CTRL_SIZE	SZ_4K
-
-#define CS1_BASE_VIRT		(void __iomem *)0xf7000000
-#define AHB_PERI_BASE_VIRT	(void __iomem *)0xf4000000
-#define APB0_PERI_BASE_VIRT	(void __iomem *)0xf1000000
-#define APB1_PERI_BASE_VIRT	(void __iomem *)0xf2000000
-#define EXT_MEM_CTRL_BASE_VIRT	(void __iomem *)0xf3000000
-#define INT_SRAM_BASE_VIRT	(void __iomem *)0xf5000000
-#define DATA_TCM_BASE_VIRT	(void __iomem *)0xf6000000
-
-#define __REG(x)     (*((volatile u32 *)(x)))
-
-/* USB Device Controller Registers */
-#define UDC_BASE	(AHB_PERI_BASE_VIRT + 0x8000)
-#define UDC_BASE_PHYS	(AHB_PERI_BASE + 0x8000)
-
-#define UDC_IR_OFFS		0x00
-#define UDC_EIR_OFFS		0x04
-#define UDC_EIER_OFFS		0x08
-#define UDC_FAR_OFFS		0x0c
-#define UDC_FNR_OFFS		0x10
-#define UDC_EDR_OFFS		0x14
-#define UDC_RT_OFFS		0x18
-#define UDC_SSR_OFFS		0x1c
-#define UDC_SCR_OFFS		0x20
-#define UDC_EP0SR_OFFS		0x24
-#define UDC_EP0CR_OFFS		0x28
-
-#define UDC_ESR_OFFS		0x2c
-#define UDC_ECR_OFFS		0x30
-#define UDC_BRCR_OFFS		0x34
-#define UDC_BWCR_OFFS		0x38
-#define UDC_MPR_OFFS		0x3c
-#define UDC_DCR_OFFS		0x40
-#define UDC_DTCR_OFFS		0x44
-#define UDC_DFCR_OFFS		0x48
-#define UDC_DTTCR1_OFFS		0x4c
-#define UDC_DTTCR2_OFFS		0x50
-#define UDC_ESR2_OFFS		0x54
-
-#define UDC_SCR2_OFFS		0x58
-#define UDC_EP0BUF_OFFS		0x60
-#define UDC_EP1BUF_OFFS		0x64
-#define UDC_EP2BUF_OFFS		0x68
-#define UDC_EP3BUF_OFFS		0x6c
-#define UDC_PLICR_OFFS		0xa0
-#define UDC_PCR_OFFS		0xa4
-
-#define UDC_UPCR0_OFFS		0xc8
-#define UDC_UPCR1_OFFS		0xcc
-#define UDC_UPCR2_OFFS		0xd0
-#define UDC_UPCR3_OFFS		0xd4
-
-/* Bits in UDC_EIR */
-#define UDC_EIR_EP0I		(1 << 0)
-#define UDC_EIR_EP1I		(1 << 1)
-#define UDC_EIR_EP2I		(1 << 2)
-#define UDC_EIR_EP3I		(1 << 3)
-#define UDC_EIR_EPI_MASK	0x0f
-
-/* Bits in UDC_EIER */
-#define UDC_EIER_EP0IE		(1 << 0)
-#define UDC_EIER_EP1IE		(1 << 1)
-#define UDC_EIER_EP2IE		(1 << 2)
-#define UDC_EIER_EP3IE		(1 << 3)
-
-/* Bits in UDC_FNR */
-#define UDC_FNR_FN_MASK		0x7ff
-#define UDC_FNR_SM		(1 << 13)
-#define UDC_FNR_FTL		(1 << 14)
-
-/* Bits in UDC_SSR */
-#define UDC_SSR_HFRES		(1 << 0)
-#define UDC_SSR_HFSUSP		(1 << 1)
-#define UDC_SSR_HFRM		(1 << 2)
-#define UDC_SSR_SDE		(1 << 3)
-#define UDC_SSR_HSP		(1 << 4)
-#define UDC_SSR_DM		(1 << 5)
-#define UDC_SSR_DP		(1 << 6)
-#define UDC_SSR_TBM		(1 << 7)
-#define UDC_SSR_VBON		(1 << 8)
-#define UDC_SSR_VBOFF		(1 << 9)
-#define UDC_SSR_EOERR		(1 << 10)
-#define UDC_SSR_DCERR		(1 << 11)
-#define UDC_SSR_TCERR		(1 << 12)
-#define UDC_SSR_BSERR		(1 << 13)
-#define UDC_SSR_TMERR		(1 << 14)
-#define UDC_SSR_BAERR		(1 << 15)
-
-/* Bits in UDC_SCR */
-#define UDC_SCR_HRESE		(1 << 0)
-#define UDC_SCR_HSSPE		(1 << 1)
-#define UDC_SCR_RRDE		(1 << 5)
-#define UDC_SCR_SPDEN		(1 << 6)
-#define UDC_SCR_DIEN		(1 << 12)
-
-/* Bits in UDC_EP0SR */
-#define UDC_EP0SR_RSR		(1 << 0)
-#define UDC_EP0SR_TST		(1 << 1)
-#define UDC_EP0SR_SHT		(1 << 4)
-#define UDC_EP0SR_LWO		(1 << 6)
-
-/* Bits in UDC_EP0CR */
-#define UDC_EP0CR_ESS		(1 << 1)
-
-/* Bits in UDC_ESR */
-#define UDC_ESR_RPS		(1 << 0)
-#define UDC_ESR_TPS		(1 << 1)
-#define UDC_ESR_LWO		(1 << 4)
-#define UDC_ESR_FFS		(1 << 6)
-
-/* Bits in UDC_ECR */
-#define UDC_ECR_ESS		(1 << 1)
-#define UDC_ECR_CDP		(1 << 2)
-
-#define UDC_ECR_FLUSH		(1 << 6)
-#define UDC_ECR_DUEN		(1 << 7)
-
-/* Bits in UDC_UPCR0 */
-#define UDC_UPCR0_VBD		(1 << 1)
-#define UDC_UPCR0_VBDS		(1 << 6)
-#define UDC_UPCR0_RCD_12	(0x0 << 9)
-#define UDC_UPCR0_RCD_24	(0x1 << 9)
-#define UDC_UPCR0_RCD_48	(0x2 << 9)
-#define UDC_UPCR0_RCS_EXT	(0x1 << 11)
-#define UDC_UPCR0_RCS_XTAL	(0x0 << 11)
-
-/* Bits in UDC_UPCR1 */
-#define UDC_UPCR1_CDT(x)	((x) << 0)
-#define UDC_UPCR1_OTGT(x)	((x) << 3)
-#define UDC_UPCR1_SQRXT(x)	((x) << 8)
-#define UDC_UPCR1_TXFSLST(x)	((x) << 12)
-
-/* Bits in UDC_UPCR2 */
-#define UDC_UPCR2_TP		(1 << 0)
-#define UDC_UPCR2_TXRT(x)	((x) << 2)
-#define UDC_UPCR2_TXVRT(x)	((x) << 5)
-#define UDC_UPCR2_OPMODE(x)	((x) << 9)
-#define UDC_UPCR2_XCVRSEL(x)	((x) << 12)
-#define UDC_UPCR2_TM		(1 << 14)
-
-/* USB Host Controller registers */
-#define USBH0_BASE	(AHB_PERI_BASE_VIRT + 0xb000)
-#define USBH1_BASE	(AHB_PERI_BASE_VIRT + 0xb800)
-
-#define OHCI_INT_ENABLE_OFFS	0x10
-
-#define RH_DESCRIPTOR_A_OFFS	0x48
-#define RH_DESCRIPTOR_B_OFFS	0x4c
-
-#define USBHTCFG0_OFFS		0x100
-#define USBHHCFG0_OFFS		0x104
-#define USBHHCFG1_OFFS		0x104
-
-/* DMA controller registers */
-#define DMAC0_BASE	(AHB_PERI_BASE + 0x4000)
-#define DMAC1_BASE	(AHB_PERI_BASE + 0xa000)
-#define DMAC2_BASE	(AHB_PERI_BASE + 0x4800)
-#define DMAC3_BASE	(AHB_PERI_BASE + 0xa800)
-
-#define DMAC_CH_OFFSET(ch)	(ch * 0x30)
-
-#define ST_SADR_OFFS		0x00
-#define SPARAM_OFFS		0x04
-#define C_SADR_OFFS		0x0c
-#define ST_DADR_OFFS		0x10
-#define DPARAM_OFFS		0x14
-#define C_DADR_OFFS		0x1c
-#define HCOUNT_OFFS		0x20
-#define CHCTRL_OFFS		0x24
-#define RPTCTRL_OFFS		0x28
-#define EXTREQ_A_OFFS		0x2c
-
-/* Bits in CHCTRL register */
-#define CHCTRL_EN		(1 << 0)
-
-#define CHCTRL_IEN		(1 << 2)
-#define CHCTRL_FLAG		(1 << 3)
-#define CHCTRL_WSIZE8		(0 << 4)
-#define CHCTRL_WSIZE16		(1 << 4)
-#define CHCTRL_WSIZE32		(2 << 4)
-
-#define CHCTRL_BSIZE1		(0 << 6)
-#define CHCTRL_BSIZE2		(1 << 6)
-#define CHCTRL_BSIZE4		(2 << 6)
-#define CHCTRL_BSIZE8		(3 << 6)
-
-#define CHCTRL_TYPE_SINGLE_E	(0 << 8)
-#define CHCTRL_TYPE_HW		(1 << 8)
-#define CHCTRL_TYPE_SW		(2 << 8)
-#define CHCTRL_TYPE_SINGLE_L	(3 << 8)
-
-#define CHCTRL_BST		(1 << 10)
-
-/* Use DMA controller 0, channel 2 for USB */
-#define USB_DMA_BASE		(DMAC0_BASE + DMAC_CH_OFFSET(2))
-
-/* NAND flash controller registers */
-#define NFC_BASE	(AHB_PERI_BASE_VIRT + 0xd000)
-#define NFC_BASE_PHYS	(AHB_PERI_BASE + 0xd000)
-
-#define NFC_CMD_OFFS		0x00
-#define NFC_LADDR_OFFS		0x04
-#define NFC_BADDR_OFFS		0x08
-#define NFC_SADDR_OFFS		0x0c
-#define NFC_WDATA_OFFS		0x10
-#define NFC_LDATA_OFFS		0x20
-#define NFC_SDATA_OFFS		0x40
-#define NFC_CTRL_OFFS		0x50
-#define NFC_PSTART_OFFS		0x54
-#define NFC_RSTART_OFFS		0x58
-#define NFC_DSIZE_OFFS		0x5c
-#define NFC_IREQ_OFFS		0x60
-#define NFC_RST_OFFS		0x64
-#define NFC_CTRL1_OFFS		0x68
-#define NFC_MDATA_OFFS		0x70
-
-#define NFC_WDATA_PHYS_ADDR	(NFC_BASE_PHYS + NFC_WDATA_OFFS)
-
-/* Bits in NFC_CTRL */
-#define NFC_CTRL_BHLD_MASK	(0xf << 0)
-#define NFC_CTRL_BPW_MASK	(0xf << 4)
-#define NFC_CTRL_BSTP_MASK	(0xf << 8)
-#define NFC_CTRL_CADDR_MASK	(0x7 << 12)
-#define NFC_CTRL_CADDR_1	(0x0 << 12)
-#define NFC_CTRL_CADDR_2	(0x1 << 12)
-#define NFC_CTRL_CADDR_3	(0x2 << 12)
-#define NFC_CTRL_CADDR_4	(0x3 << 12)
-#define NFC_CTRL_CADDR_5	(0x4 << 12)
-#define NFC_CTRL_MSK		(1 << 15)
-#define NFC_CTRL_PSIZE256	(0 << 16)
-#define NFC_CTRL_PSIZE512	(1 << 16)
-#define NFC_CTRL_PSIZE1024	(2 << 16)
-#define NFC_CTRL_PSIZE2048	(3 << 16)
-#define NFC_CTRL_PSIZE4096	(4 << 16)
-#define NFC_CTRL_PSIZE_MASK	(7 << 16)
-#define NFC_CTRL_BSIZE1		(0 << 19)
-#define NFC_CTRL_BSIZE2		(1 << 19)
-#define NFC_CTRL_BSIZE4		(2 << 19)
-#define NFC_CTRL_BSIZE8		(3 << 19)
-#define NFC_CTRL_BSIZE_MASK	(3 << 19)
-#define NFC_CTRL_RDY		(1 << 21)
-#define NFC_CTRL_CS0SEL		(1 << 22)
-#define NFC_CTRL_CS1SEL		(1 << 23)
-#define NFC_CTRL_CS2SEL		(1 << 24)
-#define NFC_CTRL_CS3SEL		(1 << 25)
-#define NFC_CTRL_CSMASK		(0xf << 22)
-#define NFC_CTRL_BW		(1 << 26)
-#define NFC_CTRL_FS		(1 << 27)
-#define NFC_CTRL_DEN		(1 << 28)
-#define NFC_CTRL_READ_IEN	(1 << 29)
-#define NFC_CTRL_PROG_IEN	(1 << 30)
-#define NFC_CTRL_RDY_IEN	(1 << 31)
-
-/* Bits in NFC_IREQ */
-#define NFC_IREQ_IRQ0		(1 << 0)
-#define NFC_IREQ_IRQ1		(1 << 1)
-#define NFC_IREQ_IRQ2		(1 << 2)
-
-#define NFC_IREQ_FLAG0		(1 << 4)
-#define NFC_IREQ_FLAG1		(1 << 5)
-#define NFC_IREQ_FLAG2		(1 << 6)
-
-/* MMC controller registers */
-#define MMC0_BASE	(AHB_PERI_BASE_VIRT + 0xe000)
-#define MMC1_BASE	(AHB_PERI_BASE_VIRT + 0xe800)
-
-/* UART base addresses */
-
-#define UART0_BASE	(APB0_PERI_BASE_VIRT + 0x07000)
-#define UART0_BASE_PHYS	(APB0_PERI_BASE + 0x07000)
-#define UART1_BASE	(APB0_PERI_BASE_VIRT + 0x08000)
-#define UART1_BASE_PHYS	(APB0_PERI_BASE + 0x08000)
-#define UART2_BASE	(APB0_PERI_BASE_VIRT + 0x09000)
-#define UART2_BASE_PHYS	(APB0_PERI_BASE + 0x09000)
-#define UART3_BASE	(APB0_PERI_BASE_VIRT + 0x0a000)
-#define UART3_BASE_PHYS	(APB0_PERI_BASE + 0x0a000)
-#define UART4_BASE	(APB0_PERI_BASE_VIRT + 0x15000)
-#define UART4_BASE_PHYS	(APB0_PERI_BASE + 0x15000)
-
-#define UART_BASE	UART0_BASE
-#define UART_BASE_PHYS	UART0_BASE_PHYS
-
-/* ECC controller */
-#define ECC_CTR_BASE	(APB0_PERI_BASE_VIRT + 0xd000)
-
-#define ECC_CTRL_OFFS		0x00
-#define ECC_BASE_OFFS		0x04
-#define ECC_MASK_OFFS		0x08
-#define ECC_CLEAR_OFFS		0x0c
-#define ECC4_0_OFFS		0x10
-#define ECC4_1_OFFS		0x14
-
-#define ECC_EADDR0_OFFS		0x50
-
-#define ECC_ERRNUM_OFFS		0x90
-#define ECC_IREQ_OFFS		0x94
-
-/* Bits in ECC_CTRL */
-#define ECC_CTRL_ECC4_DIEN	(1 << 28)
-#define ECC_CTRL_ECC8_DIEN	(1 << 29)
-#define ECC_CTRL_ECC12_DIEN	(1 << 30)
-#define ECC_CTRL_ECC_DISABLE	0x0
-#define ECC_CTRL_ECC_SLC_ENC	0x8
-#define ECC_CTRL_ECC_SLC_DEC	0x9
-#define ECC_CTRL_ECC4_ENC	0xa
-#define ECC_CTRL_ECC4_DEC	0xb
-#define ECC_CTRL_ECC8_ENC	0xc
-#define ECC_CTRL_ECC8_DEC	0xd
-#define ECC_CTRL_ECC12_ENC	0xe
-#define ECC_CTRL_ECC12_DEC	0xf
-
-/* Bits in ECC_IREQ */
-#define ECC_IREQ_E4DI		(1 << 4)
-
-#define ECC_IREQ_E4DF		(1 << 20)
-#define ECC_IREQ_E4EF		(1 << 21)
-
-/* Interrupt controller */
-
-#define PIC0_BASE	(APB1_PERI_BASE_VIRT + 0x3000)
-#define PIC0_BASE_PHYS	(APB1_PERI_BASE + 0x3000)
-
-#define PIC0_IEN_OFFS		0x00
-#define PIC0_CREQ_OFFS		0x04
-#define PIC0_IREQ_OFFS		0x08
-#define PIC0_IRQSEL_OFFS	0x0c
-#define PIC0_SRC_OFFS		0x10
-#define PIC0_MREQ_OFFS		0x14
-#define PIC0_TSTREQ_OFFS	0x18
-#define PIC0_POL_OFFS		0x1c
-#define PIC0_IRQ_OFFS		0x20
-#define PIC0_FIQ_OFFS		0x24
-#define PIC0_MIRQ_OFFS		0x28
-#define PIC0_MFIQ_OFFS		0x2c
-#define PIC0_TMODE_OFFS		0x30
-#define PIC0_SYNC_OFFS		0x34
-#define PIC0_WKUP_OFFS		0x38
-#define PIC0_TMODEA_OFFS	0x3c
-#define PIC0_INTOEN_OFFS	0x40
-#define PIC0_MEN0_OFFS		0x44
-#define PIC0_MEN_OFFS		0x48
-
-#define PIC0_IEN		__REG(PIC0_BASE + PIC0_IEN_OFFS)
-#define PIC0_IEN_PHYS		__REG(PIC0_BASE_PHYS + PIC0_IEN_OFFS)
-#define PIC0_CREQ		__REG(PIC0_BASE + PIC0_CREQ_OFFS)
-#define PIC0_CREQ_PHYS		__REG(PIC0_BASE_PHYS + PIC0_CREQ_OFFS)
-#define PIC0_IREQ		__REG(PIC0_BASE + PIC0_IREQ_OFFS)
-#define PIC0_IRQSEL		__REG(PIC0_BASE + PIC0_IRQSEL_OFFS)
-#define PIC0_IRQSEL_PHYS	__REG(PIC0_BASE_PHYS + PIC0_IRQSEL_OFFS)
-#define PIC0_SRC		__REG(PIC0_BASE + PIC0_SRC_OFFS)
-#define PIC0_MREQ		__REG(PIC0_BASE + PIC0_MREQ_OFFS)
-#define PIC0_TSTREQ		__REG(PIC0_BASE + PIC0_TSTREQ_OFFS)
-#define PIC0_POL		__REG(PIC0_BASE + PIC0_POL_OFFS)
-#define PIC0_IRQ		__REG(PIC0_BASE + PIC0_IRQ_OFFS)
-#define PIC0_FIQ		__REG(PIC0_BASE + PIC0_FIQ_OFFS)
-#define PIC0_MIRQ		__REG(PIC0_BASE + PIC0_MIRQ_OFFS)
-#define PIC0_MFIQ		__REG(PIC0_BASE + PIC0_MFIQ_OFFS)
-#define PIC0_TMODE		__REG(PIC0_BASE + PIC0_TMODE_OFFS)
-#define PIC0_TMODE_PHYS		__REG(PIC0_BASE_PHYS + PIC0_TMODE_OFFS)
-#define PIC0_SYNC		__REG(PIC0_BASE + PIC0_SYNC_OFFS)
-#define PIC0_WKUP		__REG(PIC0_BASE + PIC0_WKUP_OFFS)
-#define PIC0_TMODEA		__REG(PIC0_BASE + PIC0_TMODEA_OFFS)
-#define PIC0_INTOEN		__REG(PIC0_BASE + PIC0_INTOEN_OFFS)
-#define PIC0_MEN0		__REG(PIC0_BASE + PIC0_MEN0_OFFS)
-#define PIC0_MEN		__REG(PIC0_BASE + PIC0_MEN_OFFS)
-
-#define PIC1_BASE	(APB1_PERI_BASE_VIRT + 0x3080)
-
-#define PIC1_IEN_OFFS		0x00
-#define PIC1_CREQ_OFFS		0x04
-#define PIC1_IREQ_OFFS		0x08
-#define PIC1_IRQSEL_OFFS	0x0c
-#define PIC1_SRC_OFFS		0x10
-#define PIC1_MREQ_OFFS		0x14
-#define PIC1_TSTREQ_OFFS	0x18
-#define PIC1_POL_OFFS		0x1c
-#define PIC1_IRQ_OFFS		0x20
-#define PIC1_FIQ_OFFS		0x24
-#define PIC1_MIRQ_OFFS		0x28
-#define PIC1_MFIQ_OFFS		0x2c
-#define PIC1_TMODE_OFFS		0x30
-#define PIC1_SYNC_OFFS		0x34
-#define PIC1_WKUP_OFFS		0x38
-#define PIC1_TMODEA_OFFS	0x3c
-#define PIC1_INTOEN_OFFS	0x40
-#define PIC1_MEN1_OFFS		0x44
-#define PIC1_MEN_OFFS		0x48
-
-#define PIC1_IEN	__REG(PIC1_BASE + PIC1_IEN_OFFS)
-#define PIC1_CREQ	__REG(PIC1_BASE + PIC1_CREQ_OFFS)
-#define PIC1_IREQ	__REG(PIC1_BASE + PIC1_IREQ_OFFS)
-#define PIC1_IRQSEL	__REG(PIC1_BASE + PIC1_IRQSEL_OFFS)
-#define PIC1_SRC	__REG(PIC1_BASE + PIC1_SRC_OFFS)
-#define PIC1_MREQ	__REG(PIC1_BASE + PIC1_MREQ_OFFS)
-#define PIC1_TSTREQ	__REG(PIC1_BASE + PIC1_TSTREQ_OFFS)
-#define PIC1_POL	__REG(PIC1_BASE + PIC1_POL_OFFS)
-#define PIC1_IRQ	__REG(PIC1_BASE + PIC1_IRQ_OFFS)
-#define PIC1_FIQ	__REG(PIC1_BASE + PIC1_FIQ_OFFS)
-#define PIC1_MIRQ	__REG(PIC1_BASE + PIC1_MIRQ_OFFS)
-#define PIC1_MFIQ	__REG(PIC1_BASE + PIC1_MFIQ_OFFS)
-#define PIC1_TMODE	__REG(PIC1_BASE + PIC1_TMODE_OFFS)
-#define PIC1_SYNC	__REG(PIC1_BASE + PIC1_SYNC_OFFS)
-#define PIC1_WKUP	__REG(PIC1_BASE + PIC1_WKUP_OFFS)
-#define PIC1_TMODEA	__REG(PIC1_BASE + PIC1_TMODEA_OFFS)
-#define PIC1_INTOEN	__REG(PIC1_BASE + PIC1_INTOEN_OFFS)
-#define PIC1_MEN1	__REG(PIC1_BASE + PIC1_MEN1_OFFS)
-#define PIC1_MEN	__REG(PIC1_BASE + PIC1_MEN_OFFS)
-
-/* Timer registers */
-#define TIMER_BASE		(APB1_PERI_BASE_VIRT + 0x4000)
-#define TIMER_BASE_PHYS		(APB1_PERI_BASE + 0x4000)
-
-#define TWDCFG_OFFS		0x70
-
-#define TC32EN_OFFS		0x80
-#define TC32LDV_OFFS		0x84
-#define TC32CMP0_OFFS		0x88
-#define TC32CMP1_OFFS		0x8c
-#define TC32PCNT_OFFS		0x90
-#define TC32MCNT_OFFS		0x94
-#define TC32IRQ_OFFS		0x98
-
-/* Bits in TC32EN */
-#define TC32EN_PRESCALE_MASK	0x00ffffff
-#define TC32EN_ENABLE		(1 << 24)
-#define TC32EN_LOADZERO		(1 << 25)
-#define TC32EN_STOPMODE		(1 << 26)
-#define TC32EN_LDM0		(1 << 28)
-#define TC32EN_LDM1		(1 << 29)
-
-/* Bits in TC32IRQ */
-#define TC32IRQ_MSTAT_MASK	0x0000001f
-#define TC32IRQ_RSTAT_MASK	(0x1f << 8)
-#define TC32IRQ_IRQEN0		(1 << 16)
-#define TC32IRQ_IRQEN1		(1 << 17)
-#define TC32IRQ_IRQEN2		(1 << 18)
-#define TC32IRQ_IRQEN3		(1 << 19)
-#define TC32IRQ_IRQEN4		(1 << 20)
-#define TC32IRQ_RSYNC		(1 << 30)
-#define TC32IRQ_IRQCLR		(1 << 31)
-
-/* GPIO registers */
-#define GPIOPD_BASE		(APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOPD_DAT_OFFS		0x00
-#define GPIOPD_DOE_OFFS		0x04
-#define GPIOPD_FS0_OFFS		0x08
-#define GPIOPD_FS1_OFFS		0x0c
-#define GPIOPD_FS2_OFFS		0x10
-#define GPIOPD_RPU_OFFS		0x30
-#define GPIOPD_RPD_OFFS		0x34
-#define GPIOPD_DV0_OFFS		0x38
-#define GPIOPD_DV1_OFFS		0x3c
-
-#define GPIOPS_BASE		(APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOPS_DAT_OFFS		0x40
-#define GPIOPS_DOE_OFFS		0x44
-#define GPIOPS_FS0_OFFS		0x48
-#define GPIOPS_FS1_OFFS		0x4c
-#define GPIOPS_FS2_OFFS		0x50
-#define GPIOPS_FS3_OFFS		0x54
-#define GPIOPS_RPU_OFFS		0x70
-#define GPIOPS_RPD_OFFS		0x74
-#define GPIOPS_DV0_OFFS		0x78
-#define GPIOPS_DV1_OFFS		0x7c
-
-#define GPIOPS_FS1_SDH0_BITS	0x000000ff
-#define GPIOPS_FS1_SDH1_BITS	0x0000ff00
-
-#define GPIOPU_BASE		(APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOPU_DAT_OFFS		0x80
-#define GPIOPU_DOE_OFFS		0x84
-#define GPIOPU_FS0_OFFS		0x88
-#define GPIOPU_FS1_OFFS		0x8c
-#define GPIOPU_FS2_OFFS		0x90
-#define GPIOPU_RPU_OFFS		0xb0
-#define GPIOPU_RPD_OFFS		0xb4
-#define GPIOPU_DV0_OFFS		0xb8
-#define GPIOPU_DV1_OFFS		0xbc
-
-#define GPIOPU_FS0_TXD0		(1 << 0)
-#define GPIOPU_FS0_RXD0		(1 << 1)
-#define GPIOPU_FS0_CTS0		(1 << 2)
-#define GPIOPU_FS0_RTS0		(1 << 3)
-#define GPIOPU_FS0_TXD1		(1 << 4)
-#define GPIOPU_FS0_RXD1		(1 << 5)
-#define GPIOPU_FS0_CTS1		(1 << 6)
-#define GPIOPU_FS0_RTS1		(1 << 7)
-#define GPIOPU_FS0_TXD2		(1 << 8)
-#define GPIOPU_FS0_RXD2		(1 << 9)
-#define GPIOPU_FS0_CTS2		(1 << 10)
-#define GPIOPU_FS0_RTS2		(1 << 11)
-#define GPIOPU_FS0_TXD3		(1 << 12)
-#define GPIOPU_FS0_RXD3		(1 << 13)
-#define GPIOPU_FS0_CTS3		(1 << 14)
-#define GPIOPU_FS0_RTS3		(1 << 15)
-#define GPIOPU_FS0_TXD4		(1 << 16)
-#define GPIOPU_FS0_RXD4		(1 << 17)
-#define GPIOPU_FS0_CTS4		(1 << 18)
-#define GPIOPU_FS0_RTS4		(1 << 19)
-
-#define GPIOFC_BASE		(APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOFC_DAT_OFFS		0xc0
-#define GPIOFC_DOE_OFFS		0xc4
-#define GPIOFC_FS0_OFFS		0xc8
-#define GPIOFC_FS1_OFFS		0xcc
-#define GPIOFC_FS2_OFFS		0xd0
-#define GPIOFC_FS3_OFFS		0xd4
-#define GPIOFC_RPU_OFFS		0xf0
-#define GPIOFC_RPD_OFFS		0xf4
-#define GPIOFC_DV0_OFFS		0xf8
-#define GPIOFC_DV1_OFFS		0xfc
-
-#define GPIOFD_BASE		(APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOFD_DAT_OFFS		0x100
-#define GPIOFD_DOE_OFFS		0x104
-#define GPIOFD_FS0_OFFS		0x108
-#define GPIOFD_FS1_OFFS		0x10c
-#define GPIOFD_FS2_OFFS		0x110
-#define GPIOFD_RPU_OFFS		0x130
-#define GPIOFD_RPD_OFFS		0x134
-#define GPIOFD_DV0_OFFS		0x138
-#define GPIOFD_DV1_OFFS		0x13c
-
-#define GPIOLC_BASE		(APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOLC_DAT_OFFS		0x140
-#define GPIOLC_DOE_OFFS		0x144
-#define GPIOLC_FS0_OFFS		0x148
-#define GPIOLC_FS1_OFFS		0x14c
-#define GPIOLC_RPU_OFFS		0x170
-#define GPIOLC_RPD_OFFS		0x174
-#define GPIOLC_DV0_OFFS		0x178
-#define GPIOLC_DV1_OFFS		0x17c
-
-#define GPIOLD_BASE		(APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOLD_DAT_OFFS		0x180
-#define GPIOLD_DOE_OFFS		0x184
-#define GPIOLD_FS0_OFFS		0x188
-#define GPIOLD_FS1_OFFS		0x18c
-#define GPIOLD_FS2_OFFS		0x190
-#define GPIOLD_RPU_OFFS		0x1b0
-#define GPIOLD_RPD_OFFS		0x1b4
-#define GPIOLD_DV0_OFFS		0x1b8
-#define GPIOLD_DV1_OFFS		0x1bc
-
-#define GPIOAD_BASE		(APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOAD_DAT_OFFS		0x1c0
-#define GPIOAD_DOE_OFFS		0x1c4
-#define GPIOAD_FS0_OFFS		0x1c8
-#define GPIOAD_RPU_OFFS		0x1f0
-#define GPIOAD_RPD_OFFS		0x1f4
-#define GPIOAD_DV0_OFFS		0x1f8
-#define GPIOAD_DV1_OFFS		0x1fc
-
-#define GPIOXC_BASE		(APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOXC_DAT_OFFS		0x200
-#define GPIOXC_DOE_OFFS		0x204
-#define GPIOXC_FS0_OFFS		0x208
-#define GPIOXC_RPU_OFFS		0x230
-#define GPIOXC_RPD_OFFS		0x234
-#define GPIOXC_DV0_OFFS		0x238
-#define GPIOXC_DV1_OFFS		0x23c
-
-#define GPIOXC_FS0		__REG(GPIOXC_BASE + GPIOXC_FS0_OFFS)
-
-#define GPIOXC_FS0_CS0		(1 << 26)
-#define GPIOXC_FS0_CS1		(1 << 27)
-
-#define GPIOXD_BASE		(APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOXD_DAT_OFFS		0x240
-#define GPIOXD_FS0_OFFS		0x248
-#define GPIOXD_RPU_OFFS		0x270
-#define GPIOXD_RPD_OFFS		0x274
-#define GPIOXD_DV0_OFFS		0x278
-#define GPIOXD_DV1_OFFS		0x27c
-
-#define GPIOPK_BASE		(APB1_PERI_BASE_VIRT + 0x1c000)
-
-#define GPIOPK_RST_OFFS		0x008
-#define GPIOPK_DAT_OFFS		0x100
-#define GPIOPK_DOE_OFFS		0x104
-#define GPIOPK_FS0_OFFS		0x108
-#define GPIOPK_FS1_OFFS		0x10c
-#define GPIOPK_FS2_OFFS		0x110
-#define GPIOPK_IRQST_OFFS	0x210
-#define GPIOPK_IRQEN_OFFS	0x214
-#define GPIOPK_IRQPOL_OFFS	0x218
-#define GPIOPK_IRQTM0_OFFS	0x21c
-#define GPIOPK_IRQTM1_OFFS	0x220
-#define GPIOPK_CTL_OFFS		0x22c
-
-#define PMGPIO_BASE		(APB1_PERI_BASE_VIRT + 0x10000)
-#define BACKUP_RAM_BASE		PMGPIO_BASE
-
-#define PMGPIO_DAT_OFFS		0x800
-#define PMGPIO_DOE_OFFS		0x804
-#define PMGPIO_FS0_OFFS		0x808
-#define PMGPIO_RPU_OFFS		0x810
-#define PMGPIO_RPD_OFFS		0x814
-#define PMGPIO_DV0_OFFS		0x818
-#define PMGPIO_DV1_OFFS		0x81c
-#define PMGPIO_EE0_OFFS		0x820
-#define PMGPIO_EE1_OFFS		0x824
-#define PMGPIO_CTL_OFFS		0x828
-#define PMGPIO_DI_OFFS		0x82c
-#define PMGPIO_STR_OFFS		0x830
-#define PMGPIO_STF_OFFS		0x834
-#define PMGPIO_POL_OFFS		0x838
-#define PMGPIO_APB_OFFS		0x800
-
-/* Clock controller registers */
-#define CKC_BASE	((void __iomem *)(APB1_PERI_BASE_VIRT + 0x6000))
-
-#define CLKCTRL_OFFS		0x00
-#define PLL0CFG_OFFS		0x04
-#define PLL1CFG_OFFS		0x08
-#define CLKDIVC0_OFFS		0x0c
-
-#define BCLKCTR0_OFFS		0x14
-#define SWRESET0_OFFS		0x18
-
-#define BCLKCTR1_OFFS		0x60
-#define SWRESET1_OFFS		0x64
-#define PWDCTL_OFFS		0x68
-#define PLL2CFG_OFFS		0x6c
-#define CLKDIVC1_OFFS		0x70
-
-#define ACLKREF_OFFS		0x80
-#define ACLKI2C_OFFS		0x84
-#define ACLKSPI0_OFFS		0x88
-#define ACLKSPI1_OFFS		0x8c
-#define ACLKUART0_OFFS		0x90
-#define ACLKUART1_OFFS		0x94
-#define ACLKUART2_OFFS		0x98
-#define ACLKUART3_OFFS		0x9c
-#define ACLKUART4_OFFS		0xa0
-#define ACLKTCT_OFFS		0xa4
-#define ACLKTCX_OFFS		0xa8
-#define ACLKTCZ_OFFS		0xac
-#define ACLKADC_OFFS		0xb0
-#define ACLKDAI0_OFFS		0xb4
-#define ACLKDAI1_OFFS		0xb8
-#define ACLKLCD_OFFS		0xbc
-#define ACLKSPDIF_OFFS		0xc0
-#define ACLKUSBH_OFFS		0xc4
-#define ACLKSDH0_OFFS		0xc8
-#define ACLKSDH1_OFFS		0xcc
-#define ACLKC3DEC_OFFS		0xd0
-#define ACLKEXT_OFFS		0xd4
-#define ACLKCAN0_OFFS		0xd8
-#define ACLKCAN1_OFFS		0xdc
-#define ACLKGSB0_OFFS		0xe0
-#define ACLKGSB1_OFFS		0xe4
-#define ACLKGSB2_OFFS		0xe8
-#define ACLKGSB3_OFFS		0xec
-
-#define PLLxCFG_PD		(1 << 31)
-
-/* CLKCTRL bits */
-#define CLKCTRL_XE		(1 << 31)
-
-/* CLKDIVCx bits */
-#define CLKDIVC0_XTE		(1 << 7)
-#define CLKDIVC0_XE		(1 << 15)
-#define CLKDIVC0_P1E		(1 << 23)
-#define CLKDIVC0_P0E		(1 << 31)
-
-#define CLKDIVC1_P2E		(1 << 7)
-
-/* BCLKCTR0 clock bits */
-#define BCLKCTR0_USBD		(1 << 4)
-#define BCLKCTR0_ECC		(1 << 9)
-#define BCLKCTR0_USBH0		(1 << 11)
-#define BCLKCTR0_NFC		(1 << 16)
-
-/* BCLKCTR1 clock bits */
-#define BCLKCTR1_USBH1		(1 << 20)
-
-/* SWRESET0 bits */
-#define SWRESET0_USBD		(1 << 4)
-#define SWRESET0_USBH0		(1 << 11)
-
-/* SWRESET1 bits */
-#define SWRESET1_USBH1		(1 << 20)
-
-/* System clock sources.
- * Note: These are the clock sources that serve as parents for
- * all other clocks. They have no parents themselves.
- *
- * These values are used for struct clk->root_id. All clocks
- * that are not system clock sources have this value set to
- * CLK_SRC_NOROOT.
- * The values for system clocks start with CLK_SRC_PLL0 == 0
- * because this gives us exactly the values needed for the lower
- * 4 bits of ACLK_* registers. Therefore, CLK_SRC_NOROOT is
- * defined as -1 to not disturb the order.
- */
-enum root_clks {
-	CLK_SRC_NOROOT = -1,
-	CLK_SRC_PLL0 = 0,
-	CLK_SRC_PLL1,
-	CLK_SRC_PLL0DIV,
-	CLK_SRC_PLL1DIV,
-	CLK_SRC_XI,
-	CLK_SRC_XIDIV,
-	CLK_SRC_XTI,
-	CLK_SRC_XTIDIV,
-	CLK_SRC_PLL2,
-	CLK_SRC_PLL2DIV,
-	CLK_SRC_PK0,
-	CLK_SRC_PK1,
-	CLK_SRC_PK2,
-	CLK_SRC_PK3,
-	CLK_SRC_PK4,
-	CLK_SRC_48MHZ
-};
-
-#define CLK_SRC_MASK		0xf
-
-/* Bits in ACLK* registers */
-#define ACLK_EN		(1 << 28)
-#define ACLK_SEL_SHIFT		24
-#define ACLK_SEL_MASK		0x0f000000
-#define ACLK_DIV_MASK		0x00000fff
-
-/* System configuration registers */
-
-#define SCFG_BASE		(APB1_PERI_BASE_VIRT + 0x13000)
-
-#define	BMI_OFFS		0x00
-#define AHBCON0_OFFS		0x04
-#define APBPWE_OFFS		0x08
-#define DTCMWAIT_OFFS		0x0c
-#define ECCSEL_OFFS		0x10
-#define AHBCON1_OFFS		0x14
-#define SDHCFG_OFFS		0x18
-#define REMAP_OFFS		0x20
-#define LCDSIAE_OFFS		0x24
-#define XMCCFG_OFFS		0xe0
-#define IMCCFG_OFFS		0xe4
-
-/* Values for ECCSEL */
-#define ECCSEL_EXTMEM		0x0
-#define ECCSEL_DTCM		0x1
-#define ECCSEL_INT_SRAM		0x2
-#define ECCSEL_AHB		0x3
-
-/* Bits in XMCCFG */
-#define XMCCFG_NFCE		(1 << 1)
-#define XMCCFG_FDXD		(1 << 2)
-
-/* External memory controller registers */
-
-#define EMC_BASE		EXT_MEM_CTRL_BASE
-
-#define SDCFG_OFFS		0x00
-#define SDFSM_OFFS		0x04
-#define MCFG_OFFS		0x08
-
-#define CSCFG0_OFFS		0x10
-#define CSCFG1_OFFS		0x14
-#define CSCFG2_OFFS		0x18
-#define CSCFG3_OFFS		0x1c
-
-#define MCFG_SDEN		(1 << 4)
-
-#endif /* TCC8K_REGS_H */
diff --git a/arch/arm/plat-tcc/include/mach/timex.h b/arch/arm/plat-tcc/include/mach/timex.h
deleted file mode 100644
index 057acbe..0000000
--- a/arch/arm/plat-tcc/include/mach/timex.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * A definition needed by arch core code.
- *
- */
-#define CLOCK_TICK_RATE		(HZ * 100000UL)
diff --git a/arch/arm/plat-tcc/include/mach/uncompress.h b/arch/arm/plat-tcc/include/mach/uncompress.h
deleted file mode 100644
index 7a3e33a..0000000
--- a/arch/arm/plat-tcc/include/mach/uncompress.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * This file is licensed under the terms of the GPL version 2.
- */
-
-#include <linux/serial_reg.h>
-#include <linux/types.h>
-
-#include <mach/tcc8k-regs.h>
-
-unsigned int system_rev;
-
-#define ID_MASK			0x7fff
-
-static void putc(int c)
-{
-	u32 *uart_lsr = (u32 *)(UART_BASE_PHYS + (UART_LSR << 2));
-	u32 *uart_tx = (u32 *)(UART_BASE_PHYS + (UART_TX << 2));
-
-	while (!(*uart_lsr & UART_LSR_THRE))
-		barrier();
-	*uart_tx = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/plat-tcc/include/mach/vmalloc.h b/arch/arm/plat-tcc/include/mach/vmalloc.h
deleted file mode 100644
index 99414d9..0000000
--- a/arch/arm/plat-tcc/include/mach/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * Author: <linux@telechips.com>
- * Created: June 10, 2008
- *
- * Copyright (C) 2000 Russell King.
- * Copyright (C) 2008-2009 Telechips
- *
- * Licensed under the terms of the GPL v2.
- */
-#define VMALLOC_END	0xf0000000UL
diff --git a/arch/arm/plat-tcc/system.c b/arch/arm/plat-tcc/system.c
deleted file mode 100644
index cc208fa..0000000
--- a/arch/arm/plat-tcc/system.c
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * System functions for Telechips TCCxxxx SoCs
- *
- * Copyright (C) Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GPL v2.
- *
- */
-
-#include <linux/io.h>
-
-#include <mach/tcc8k-regs.h>
-
-/* System reboot */
-void plat_tcc_reboot(void)
-{
-	/* Make sure clocks are on */
-	__raw_writel(0xffffffff, CKC_BASE + BCLKCTR0_OFFS);
-
-	/* Enable watchdog reset */
-	__raw_writel(0x49, TIMER_BASE + TWDCFG_OFFS);
-	/* Wait for reset */
-	while(1)
-		;
-}
diff --git a/arch/arm/plat-versatile/sched-clock.c b/arch/arm/plat-versatile/sched-clock.c
index 3d6a4c2..b33b74c 100644
--- a/arch/arm/plat-versatile/sched-clock.c
+++ b/arch/arm/plat-versatile/sched-clock.c
@@ -18,41 +18,24 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
+#include <linux/kernel.h>
 #include <linux/io.h>
-#include <linux/sched.h>
 
 #include <asm/sched_clock.h>
 #include <plat/sched_clock.h>
 
-static DEFINE_CLOCK_DATA(cd);
 static void __iomem *ctr;
 
-/*
- * Constants generated by clocks_calc_mult_shift(m, s, 24MHz, NSEC_PER_SEC, 60).
- * This gives a resolution of about 41ns and a wrap period of about 178s.
- */
-#define SC_MULT		2796202667u
-#define SC_SHIFT	26
-
-unsigned long long notrace sched_clock(void)
+static u32 notrace versatile_read_sched_clock(void)
 {
-	if (ctr) {
-		u32 cyc = readl(ctr);
-		return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0,
-						SC_MULT, SC_SHIFT);
-	} else
-		return 0;
-}
+	if (ctr)
+		return readl(ctr);
 
-static void notrace versatile_update_sched_clock(void)
-{
-	u32 cyc = readl(ctr);
-	update_sched_clock(&cd, cyc, (u32)~0);
+	return 0;
 }
 
 void __init versatile_sched_clock_init(void __iomem *reg, unsigned long rate)
 {
 	ctr = reg;
-	init_fixed_sched_clock(&cd, versatile_update_sched_clock,
-			       32, rate, SC_MULT, SC_SHIFT);
+	setup_sched_clock(versatile_read_sched_clock, 32, rate);
 }
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 5bdeef9..f9c9f33 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -16,7 +16,7 @@
 # are merged into mainline or have been edited in the machine database
 # within the last 12 months.  References to machine_is_NAME() do not count!
 #
-# Last update: Sat May 7 08:48:24 2011
+# Last update: Tue Dec 6 11:07:38 2011
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -269,7 +269,7 @@ dns323			MACH_DNS323		DNS323			1542
 omap3_beagle		MACH_OMAP3_BEAGLE	OMAP3_BEAGLE		1546
 nokia_n810		MACH_NOKIA_N810		NOKIA_N810		1548
 pcm038			MACH_PCM038		PCM038			1551
-ts_x09			MACH_TS209		TS209			1565
+ts209			MACH_TS209		TS209			1565
 at91cap9adk		MACH_AT91CAP9ADK	AT91CAP9ADK		1566
 mx31moboard		MACH_MX31MOBOARD	MX31MOBOARD		1574
 vision_ep9307		MACH_VISION_EP9307	VISION_EP9307		1578
@@ -321,7 +321,6 @@ lb88rc8480		MACH_LB88RC8480		LB88RC8480		1769
 mx25_3ds		MACH_MX25_3DS		MX25_3DS		1771
 omap3530_lv_som		MACH_OMAP3530_LV_SOM	OMAP3530_LV_SOM		1773
 davinci_da830_evm	MACH_DAVINCI_DA830_EVM	DAVINCI_DA830_EVM	1781
-at572d940hfek		MACH_AT572D940HFEB	AT572D940HFEB		1783
 dove_db			MACH_DOVE_DB		DOVE_DB			1788
 overo			MACH_OVERO		OVERO			1798
 at2440evb		MACH_AT2440EVB		AT2440EVB		1799
@@ -459,7 +458,7 @@ guruplug		MACH_GURUPLUG		GURUPLUG		2659
 spear310		MACH_SPEAR310		SPEAR310		2660
 spear320		MACH_SPEAR320		SPEAR320		2661
 aquila			MACH_AQUILA		AQUILA			2676
-sheeva_esata		MACH_ESATA_SHEEVAPLUG	ESATA_SHEEVAPLUG	2678
+esata_sheevaplug	MACH_ESATA_SHEEVAPLUG	ESATA_SHEEVAPLUG	2678
 msm7x30_surf		MACH_MSM7X30_SURF	MSM7X30_SURF		2679
 ea2478devkit		MACH_EA2478DEVKIT	EA2478DEVKIT		2683
 terastation_wxl		MACH_TERASTATION_WXL	TERASTATION_WXL		2697
@@ -491,380 +490,53 @@ eukrea_cpuimx35sd	MACH_EUKREA_CPUIMX35SD	EUKREA_CPUIMX35SD	2821
 eukrea_cpuimx51sd	MACH_EUKREA_CPUIMX51SD	EUKREA_CPUIMX51SD	2822
 eukrea_cpuimx51		MACH_EUKREA_CPUIMX51	EUKREA_CPUIMX51		2823
 smdkc210		MACH_SMDKC210		SMDKC210		2838
-omap3_braillo		MACH_OMAP3_BRAILLO	OMAP3_BRAILLO		2839
-spyplug			MACH_SPYPLUG		SPYPLUG			2840
-ginger			MACH_GINGER		GINGER			2841
-tny_t3530		MACH_TNY_T3530		TNY_T3530		2842
 pca102			MACH_PCA102		PCA102			2843
-spade			MACH_SPADE		SPADE			2844
-mxc25_topaz		MACH_MXC25_TOPAZ	MXC25_TOPAZ		2845
 t5325			MACH_T5325		T5325			2846
-gw2361			MACH_GW2361		GW2361			2847
-elog			MACH_ELOG		ELOG			2848
 income			MACH_INCOME		INCOME			2849
-bcm589x			MACH_BCM589X		BCM589X			2850
-etna			MACH_ETNA		ETNA			2851
-hawks			MACH_HAWKS		HAWKS			2852
-meson			MACH_MESON		MESON			2853
-xsbase255		MACH_XSBASE255		XSBASE255		2854
-pvm2030			MACH_PVM2030		PVM2030			2855
-mioa502			MACH_MIOA502		MIOA502			2856
 vvbox_sdorig2		MACH_VVBOX_SDORIG2	VVBOX_SDORIG2		2857
 vvbox_sdlite2		MACH_VVBOX_SDLITE2	VVBOX_SDLITE2		2858
 vvbox_sdpro4		MACH_VVBOX_SDPRO4	VVBOX_SDPRO4		2859
-htc_spv_m700		MACH_HTC_SPV_M700	HTC_SPV_M700		2860
 mx257sx			MACH_MX257SX		MX257SX			2861
 goni			MACH_GONI		GONI			2862
-msm8x55_svlte_ffa	MACH_MSM8X55_SVLTE_FFA	MSM8X55_SVLTE_FFA	2863
-msm8x55_svlte_surf	MACH_MSM8X55_SVLTE_SURF	MSM8X55_SVLTE_SURF	2864
-quickstep		MACH_QUICKSTEP		QUICKSTEP		2865
-dmw96			MACH_DMW96		DMW96			2866
-hammerhead		MACH_HAMMERHEAD		HAMMERHEAD		2867
-trident			MACH_TRIDENT		TRIDENT			2868
-lightning		MACH_LIGHTNING		LIGHTNING		2869
-iconnect		MACH_ICONNECT		ICONNECT		2870
-autobot			MACH_AUTOBOT		AUTOBOT			2871
-coconut			MACH_COCONUT		COCONUT			2872
-durian			MACH_DURIAN		DURIAN			2873
-cayenne			MACH_CAYENNE		CAYENNE			2874
-fuji			MACH_FUJI		FUJI			2875
-synology_6282		MACH_SYNOLOGY_6282	SYNOLOGY_6282		2876
-em1sy			MACH_EM1SY		EM1SY			2877
-m502			MACH_M502		M502			2878
-matrix518		MACH_MATRIX518		MATRIX518		2879
-tiny_gurnard		MACH_TINY_GURNARD	TINY_GURNARD		2880
-spear1310		MACH_SPEAR1310		SPEAR1310		2881
 bv07			MACH_BV07		BV07			2882
-mxt_td61		MACH_MXT_TD61		MXT_TD61		2883
 openrd_ultimate		MACH_OPENRD_ULTIMATE	OPENRD_ULTIMATE		2884
 devixp			MACH_DEVIXP		DEVIXP			2885
 miccpt			MACH_MICCPT		MICCPT			2886
 mic256			MACH_MIC256		MIC256			2887
-as1167			MACH_AS1167		AS1167			2888
-omap3_ibiza		MACH_OMAP3_IBIZA	OMAP3_IBIZA		2889
 u5500			MACH_U5500		U5500			2890
-davinci_picto		MACH_DAVINCI_PICTO	DAVINCI_PICTO		2891
-mecha			MACH_MECHA		MECHA			2892
-bubba3			MACH_BUBBA3		BUBBA3			2893
-pupitre			MACH_PUPITRE		PUPITRE			2894
-tegra_vogue		MACH_TEGRA_VOGUE	TEGRA_VOGUE		2896
-tegra_e1165		MACH_TEGRA_E1165	TEGRA_E1165		2897
-simplenet		MACH_SIMPLENET		SIMPLENET		2898
-ec4350tbm		MACH_EC4350TBM		EC4350TBM		2899
-pec_tc			MACH_PEC_TC		PEC_TC			2900
-pec_hc2			MACH_PEC_HC2		PEC_HC2			2901
-esl_mobilis_a		MACH_ESL_MOBILIS_A	ESL_MOBILIS_A		2902
-esl_mobilis_b		MACH_ESL_MOBILIS_B	ESL_MOBILIS_B		2903
-esl_wave_a		MACH_ESL_WAVE_A		ESL_WAVE_A		2904
-esl_wave_b		MACH_ESL_WAVE_B		ESL_WAVE_B		2905
-unisense_mmm		MACH_UNISENSE_MMM	UNISENSE_MMM		2906
-blueshark		MACH_BLUESHARK		BLUESHARK		2907
-e10			MACH_E10		E10			2908
-app3k_robin		MACH_APP3K_ROBIN	APP3K_ROBIN		2909
-pov15hd			MACH_POV15HD		POV15HD			2910
-stella			MACH_STELLA		STELLA			2911
 linkstation_lschl	MACH_LINKSTATION_LSCHL	LINKSTATION_LSCHL	2913
-netwalker		MACH_NETWALKER		NETWALKER		2914
-acsx106			MACH_ACSX106		ACSX106			2915
-atlas5_c1		MACH_ATLAS5_C1		ATLAS5_C1		2916
-nsb3ast			MACH_NSB3AST		NSB3AST			2917
-gnet_slc		MACH_GNET_SLC		GNET_SLC		2918
-af4000			MACH_AF4000		AF4000			2919
-ark9431			MACH_ARK9431		ARK9431			2920
-fs_s5pc100		MACH_FS_S5PC100		FS_S5PC100		2921
-omap3505nova8		MACH_OMAP3505NOVA8	OMAP3505NOVA8		2922
-omap3621_edp1		MACH_OMAP3621_EDP1	OMAP3621_EDP1		2923
-oratisaes		MACH_ORATISAES		ORATISAES		2924
 smdkv310		MACH_SMDKV310		SMDKV310		2925
-siemens_l0		MACH_SIEMENS_L0		SIEMENS_L0		2926
-ventana			MACH_VENTANA		VENTANA			2927
 wm8505_7in_netbook	MACH_WM8505_7IN_NETBOOK	WM8505_7IN_NETBOOK	2928
-ec4350sdb		MACH_EC4350SDB		EC4350SDB		2929
-mimas			MACH_MIMAS		MIMAS			2930
-titan			MACH_TITAN		TITAN			2931
 craneboard		MACH_CRANEBOARD		CRANEBOARD		2932
-es2440			MACH_ES2440		ES2440			2933
-najay_a9263		MACH_NAJAY_A9263	NAJAY_A9263		2934
-htctornado		MACH_HTCTORNADO		HTCTORNADO		2935
-dimm_mx257		MACH_DIMM_MX257		DIMM_MX257		2936
-jigen301		MACH_JIGEN		JIGEN			2937
 smdk6450		MACH_SMDK6450		SMDK6450		2938
-meno_qng		MACH_MENO_QNG		MENO_QNG		2939
-ns2416			MACH_NS2416		NS2416			2940
-rpc353			MACH_RPC353		RPC353			2941
-tq6410			MACH_TQ6410		TQ6410			2942
-sky6410			MACH_SKY6410		SKY6410			2943
-dynasty			MACH_DYNASTY		DYNASTY			2944
-vivo			MACH_VIVO		VIVO			2945
-bury_bl7582		MACH_BURY_BL7582	BURY_BL7582		2946
-bury_bps5270		MACH_BURY_BPS5270	BURY_BPS5270		2947
-basi			MACH_BASI		BASI			2948
-tn200			MACH_TN200		TN200			2949
-c2mmi			MACH_C2MMI		C2MMI			2950
-meson_6236m		MACH_MESON_6236M	MESON_6236M		2951
-meson_8626m		MACH_MESON_8626M	MESON_8626M		2952
-tube			MACH_TUBE		TUBE			2953
-messina			MACH_MESSINA		MESSINA			2954
-mx50_arm2		MACH_MX50_ARM2		MX50_ARM2		2955
-cetus9263		MACH_CETUS9263		CETUS9263		2956
 brownstone		MACH_BROWNSTONE		BROWNSTONE		2957
-vmx25			MACH_VMX25		VMX25			2958
-vmx51			MACH_VMX51		VMX51			2959
-abacus			MACH_ABACUS		ABACUS			2960
-cm4745			MACH_CM4745		CM4745			2961
-oratislink		MACH_ORATISLINK		ORATISLINK		2962
-davinci_dm365_dvr	MACH_DAVINCI_DM365_DVR	DAVINCI_DM365_DVR	2963
-netviz			MACH_NETVIZ		NETVIZ			2964
 flexibity		MACH_FLEXIBITY		FLEXIBITY		2965
-wlan_computer		MACH_WLAN_COMPUTER	WLAN_COMPUTER		2966
-lpc24xx			MACH_LPC24XX		LPC24XX			2967
-spica			MACH_SPICA		SPICA			2968
-gpsdisplay		MACH_GPSDISPLAY		GPSDISPLAY		2969
-bipnet			MACH_BIPNET		BIPNET			2970
-overo_ctu_inertial	MACH_OVERO_CTU_INERTIAL	OVERO_CTU_INERTIAL	2971
-davinci_dm355_mmm	MACH_DAVINCI_DM355_MMM	DAVINCI_DM355_MMM	2972
-pc9260_v2		MACH_PC9260_V2		PC9260_V2		2973
-ptx7545			MACH_PTX7545		PTX7545			2974
-tm_efdc			MACH_TM_EFDC		TM_EFDC			2975
-omap3_waldo1		MACH_OMAP3_WALDO1	OMAP3_WALDO1		2977
-flyer			MACH_FLYER		FLYER			2978
-tornado3240		MACH_TORNADO3240	TORNADO3240		2979
-soli_01			MACH_SOLI_01		SOLI_01			2980
-omapl138_europalc	MACH_OMAPL138_EUROPALC	OMAPL138_EUROPALC	2981
-helios_v1		MACH_HELIOS_V1		HELIOS_V1		2982
-netspace_lite_v2	MACH_NETSPACE_LITE_V2	NETSPACE_LITE_V2	2983
-ssc			MACH_SSC		SSC			2984
-premierwave_en		MACH_PREMIERWAVE_EN	PREMIERWAVE_EN		2985
-wasabi			MACH_WASABI		WASABI			2986
 mx50_rdp		MACH_MX50_RDP		MX50_RDP		2988
 universal_c210		MACH_UNIVERSAL_C210	UNIVERSAL_C210		2989
 real6410		MACH_REAL6410		REAL6410		2990
-spx_sakura		MACH_SPX_SAKURA		SPX_SAKURA		2991
-ij3k_2440		MACH_IJ3K_2440		IJ3K_2440		2992
-omap3_bc10		MACH_OMAP3_BC10		OMAP3_BC10		2993
-thebe			MACH_THEBE		THEBE			2994
-rv082			MACH_RV082		RV082			2995
-armlguest		MACH_ARMLGUEST		ARMLGUEST		2996
-tjinc1000		MACH_TJINC1000		TJINC1000		2997
 dockstar		MACH_DOCKSTAR		DOCKSTAR		2998
-ax8008			MACH_AX8008		AX8008			2999
-gnet_sgce		MACH_GNET_SGCE		GNET_SGCE		3000
-pxwnas_500_1000		MACH_PXWNAS_500_1000	PXWNAS_500_1000		3001
-ea20			MACH_EA20		EA20			3002
-awm2			MACH_AWM2		AWM2			3003
 ti8148evm		MACH_TI8148EVM		TI8148EVM		3004
 seaboard		MACH_SEABOARD		SEABOARD		3005
-linkstation_chlv2	MACH_LINKSTATION_CHLV2	LINKSTATION_CHLV2	3006
-tera_pro2_rack		MACH_TERA_PRO2_RACK	TERA_PRO2_RACK		3007
-rubys			MACH_RUBYS		RUBYS			3008
-aquarius		MACH_AQUARIUS		AQUARIUS		3009
 mx53_ard		MACH_MX53_ARD		MX53_ARD		3010
 mx53_smd		MACH_MX53_SMD		MX53_SMD		3011
-lswxl			MACH_LSWXL		LSWXL			3012
-dove_avng_v3		MACH_DOVE_AVNG_V3	DOVE_AVNG_V3		3013
-sdi_ess_9263		MACH_SDI_ESS_9263	SDI_ESS_9263		3014
-jocpu550		MACH_JOCPU550		JOCPU550		3015
 msm8x60_rumi3		MACH_MSM8X60_RUMI3	MSM8X60_RUMI3		3016
 msm8x60_ffa		MACH_MSM8X60_FFA	MSM8X60_FFA		3017
-yanomami		MACH_YANOMAMI		YANOMAMI		3018
-gta04			MACH_GTA04		GTA04			3019
 cm_a510			MACH_CM_A510		CM_A510			3020
-omap3_rfs200		MACH_OMAP3_RFS200	OMAP3_RFS200		3021
-kx33xx			MACH_KX33XX		KX33XX			3022
-ptx7510			MACH_PTX7510		PTX7510			3023
-top9000			MACH_TOP9000		TOP9000			3024
-teenote			MACH_TEENOTE		TEENOTE			3025
-ts3			MACH_TS3		TS3			3026
-a0			MACH_A0			A0			3027
-fsm9xxx_surf		MACH_FSM9XXX_SURF	FSM9XXX_SURF		3028
-fsm9xxx_ffa		MACH_FSM9XXX_FFA	FSM9XXX_FFA		3029
-frrhwcdma60w		MACH_FRRHWCDMA60W	FRRHWCDMA60W		3030
-remus			MACH_REMUS		REMUS			3031
-at91cap7xdk		MACH_AT91CAP7XDK	AT91CAP7XDK		3032
-at91cap7stk		MACH_AT91CAP7STK	AT91CAP7STK		3033
-kt_sbc_sam9_1		MACH_KT_SBC_SAM9_1	KT_SBC_SAM9_1		3034
-armada_xp_db		MACH_ARMADA_XP_DB	ARMADA_XP_DB		3036
-spdm			MACH_SPDM		SPDM			3037
-gtib			MACH_GTIB		GTIB			3038
-dgm3240			MACH_DGM3240		DGM3240			3039
-htcmega			MACH_HTCMEGA		HTCMEGA			3041
-tricorder		MACH_TRICORDER		TRICORDER		3042
 tx28			MACH_TX28		TX28			3043
-bstbrd			MACH_BSTBRD		BSTBRD			3044
-pwb3090			MACH_PWB3090		PWB3090			3045
-idea6410		MACH_IDEA6410		IDEA6410		3046
-qbc9263			MACH_QBC9263		QBC9263			3047
-borabora		MACH_BORABORA		BORABORA		3048
-valdez			MACH_VALDEZ		VALDEZ			3049
-ls9g20			MACH_LS9G20		LS9G20			3050
-mios_v1			MACH_MIOS_V1		MIOS_V1			3051
-s5pc110_crespo		MACH_S5PC110_CRESPO	S5PC110_CRESPO		3052
-controltek9g20		MACH_CONTROLTEK9G20	CONTROLTEK9G20		3053
-tin307			MACH_TIN307		TIN307			3054
-tin510			MACH_TIN510		TIN510			3055
-bluecheese		MACH_BLUECHEESE		BLUECHEESE		3057
-tem3x30			MACH_TEM3X30		TEM3X30			3058
-harvest_desoto		MACH_HARVEST_DESOTO	HARVEST_DESOTO		3059
-msm8x60_qrdc		MACH_MSM8X60_QRDC	MSM8X60_QRDC		3060
-spear900		MACH_SPEAR900		SPEAR900		3061
 pcontrol_g20		MACH_PCONTROL_G20	PCONTROL_G20		3062
-rdstor			MACH_RDSTOR		RDSTOR			3063
-usdloader		MACH_USDLOADER		USDLOADER		3064
-tsoploader		MACH_TSOPLOADER		TSOPLOADER		3065
-kronos			MACH_KRONOS		KRONOS			3066
-ffcore			MACH_FFCORE		FFCORE			3067
-mone			MACH_MONE		MONE			3068
-unit2s			MACH_UNIT2S		UNIT2S			3069
-acer_a5			MACH_ACER_A5		ACER_A5			3070
-etherpro_isp		MACH_ETHERPRO_ISP	ETHERPRO_ISP		3071
-stretchs7000		MACH_STRETCHS7000	STRETCHS7000		3072
-p87_smartsim		MACH_P87_SMARTSIM	P87_SMARTSIM		3073
-tulip			MACH_TULIP		TULIP			3074
-sunflower		MACH_SUNFLOWER		SUNFLOWER		3075
-rib			MACH_RIB		RIB			3076
-clod			MACH_CLOD		CLOD			3077
-rump			MACH_RUMP		RUMP			3078
-tenderloin		MACH_TENDERLOIN		TENDERLOIN		3079
-shortloin		MACH_SHORTLOIN		SHORTLOIN		3080
-antares			MACH_ANTARES		ANTARES			3082
-wb40n			MACH_WB40N		WB40N			3083
-herring			MACH_HERRING		HERRING			3084
-naxy400			MACH_NAXY400		NAXY400			3085
-naxy1200		MACH_NAXY1200		NAXY1200		3086
 vpr200			MACH_VPR200		VPR200			3087
-bug20			MACH_BUG20		BUG20			3088
-goflexnet		MACH_GOFLEXNET		GOFLEXNET		3089
 torbreck		MACH_TORBRECK		TORBRECK		3090
-saarb_mg1		MACH_SAARB_MG1		SAARB_MG1		3091
-callisto		MACH_CALLISTO		CALLISTO		3092
-multhsu			MACH_MULTHSU		MULTHSU			3093
-saluda			MACH_SALUDA		SALUDA			3094
-pemp_omap3_apollo	MACH_PEMP_OMAP3_APOLLO	PEMP_OMAP3_APOLLO	3095
-vc0718			MACH_VC0718		VC0718			3096
-mvblx			MACH_MVBLX		MVBLX			3097
-inhand_apeiron		MACH_INHAND_APEIRON	INHAND_APEIRON		3098
-inhand_fury		MACH_INHAND_FURY	INHAND_FURY		3099
-inhand_siren		MACH_INHAND_SIREN	INHAND_SIREN		3100
-hdnvp			MACH_HDNVP		HDNVP			3101
-softwinner		MACH_SOFTWINNER		SOFTWINNER		3102
 prima2_evb		MACH_PRIMA2_EVB		PRIMA2_EVB		3103
-nas6210			MACH_NAS6210		NAS6210			3104
-unisdev			MACH_UNISDEV		UNISDEV			3105
-sbca11			MACH_SBCA11		SBCA11			3106
-saga			MACH_SAGA		SAGA			3107
-ns_k330			MACH_NS_K330		NS_K330			3108
-tanna			MACH_TANNA		TANNA			3109
-imate8502		MACH_IMATE8502		IMATE8502		3110
-aspen			MACH_ASPEN		ASPEN			3111
-daintree_cwac		MACH_DAINTREE_CWAC	DAINTREE_CWAC		3112
-zmx25			MACH_ZMX25		ZMX25			3113
-maple1			MACH_MAPLE1		MAPLE1			3114
-qsd8x72_surf		MACH_QSD8X72_SURF	QSD8X72_SURF		3115
-qsd8x72_ffa		MACH_QSD8X72_FFA	QSD8X72_FFA		3116
-abilene			MACH_ABILENE		ABILENE			3117
-eigen_ttr		MACH_EIGEN_TTR		EIGEN_TTR		3118
-iomega_ix2_200		MACH_IOMEGA_IX2_200	IOMEGA_IX2_200		3119
-coretec_vcx7400		MACH_CORETEC_VCX7400	CORETEC_VCX7400		3120
-santiago		MACH_SANTIAGO		SANTIAGO		3121
-mx257sol		MACH_MX257SOL		MX257SOL		3122
-strasbourg		MACH_STRASBOURG		STRASBOURG		3123
-msm8x60_fluid		MACH_MSM8X60_FLUID	MSM8X60_FLUID		3124
-smartqv5		MACH_SMARTQV5		SMARTQV5		3125
-smartqv3		MACH_SMARTQV3		SMARTQV3		3126
-smartqv7		MACH_SMARTQV7		SMARTQV7		3127
 paz00			MACH_PAZ00		PAZ00			3128
 acmenetusfoxg20		MACH_ACMENETUSFOXG20	ACMENETUSFOXG20		3129
-fwbd_0404		MACH_FWBD_0404		FWBD_0404		3131
-hdgu			MACH_HDGU		HDGU			3132
-pyramid			MACH_PYRAMID		PYRAMID			3133
-epiphan			MACH_EPIPHAN		EPIPHAN			3134
-omap_bender		MACH_OMAP_BENDER	OMAP_BENDER		3135
-gurnard			MACH_GURNARD		GURNARD			3136
-gtl_it5100		MACH_GTL_IT5100		GTL_IT5100		3137
-bcm2708			MACH_BCM2708		BCM2708			3138
-mx51_ggc		MACH_MX51_GGC		MX51_GGC		3139
-sharespace		MACH_SHARESPACE		SHARESPACE		3140
-haba_knx_explorer	MACH_HABA_KNX_EXPLORER	HABA_KNX_EXPLORER	3141
-simtec_kirkmod		MACH_SIMTEC_KIRKMOD	SIMTEC_KIRKMOD		3142
-crux			MACH_CRUX		CRUX			3143
-mx51_bravo		MACH_MX51_BRAVO		MX51_BRAVO		3144
-charon			MACH_CHARON		CHARON			3145
-picocom3		MACH_PICOCOM3		PICOCOM3		3146
-picocom4		MACH_PICOCOM4		PICOCOM4		3147
-serrano			MACH_SERRANO		SERRANO			3148
-doubleshot		MACH_DOUBLESHOT		DOUBLESHOT		3149
-evsy			MACH_EVSY		EVSY			3150
-huashan			MACH_HUASHAN		HUASHAN			3151
-lausanne		MACH_LAUSANNE		LAUSANNE		3152
-emerald			MACH_EMERALD		EMERALD			3153
-tqma35			MACH_TQMA35		TQMA35			3154
-marvel			MACH_MARVEL		MARVEL			3155
-manuae			MACH_MANUAE		MANUAE			3156
-chacha			MACH_CHACHA		CHACHA			3157
-lemon			MACH_LEMON		LEMON			3158
-csc			MACH_CSC		CSC			3159
-gira_knxip_router	MACH_GIRA_KNXIP_ROUTER	GIRA_KNXIP_ROUTER	3160
-t20			MACH_T20		T20			3161
-hdmini			MACH_HDMINI		HDMINI			3162
-sciphone_g2		MACH_SCIPHONE_G2	SCIPHONE_G2		3163
-express			MACH_EXPRESS		EXPRESS			3164
-express_kt		MACH_EXPRESS_KT		EXPRESS_KT		3165
-maximasp		MACH_MAXIMASP		MAXIMASP		3166
-nitrogen_imx51		MACH_NITROGEN_IMX51	NITROGEN_IMX51		3167
-nitrogen_imx53		MACH_NITROGEN_IMX53	NITROGEN_IMX53		3168
-sunfire			MACH_SUNFIRE		SUNFIRE			3169
-arowana			MACH_AROWANA		AROWANA			3170
-tegra_daytona		MACH_TEGRA_DAYTONA	TEGRA_DAYTONA		3171
-tegra_swordfish		MACH_TEGRA_SWORDFISH	TEGRA_SWORDFISH		3172
-edison			MACH_EDISON		EDISON			3173
-svp8500v1		MACH_SVP8500V1		SVP8500V1		3174
-svp8500v2		MACH_SVP8500V2		SVP8500V2		3175
-svp5500			MACH_SVP5500		SVP5500			3176
-b5500			MACH_B5500		B5500			3177
-s5500			MACH_S5500		S5500			3178
-icon			MACH_ICON		ICON			3179
-elephant		MACH_ELEPHANT		ELEPHANT		3180
-shooter			MACH_SHOOTER		SHOOTER			3182
-spade_lte		MACH_SPADE_LTE		SPADE_LTE		3183
-philhwani		MACH_PHILHWANI		PHILHWANI		3184
-gsncomm			MACH_GSNCOMM		GSNCOMM			3185
-strasbourg_a2		MACH_STRASBOURG_A2	STRASBOURG_A2		3186
-mmm			MACH_MMM		MMM			3187
-davinci_dm365_bv	MACH_DAVINCI_DM365_BV	DAVINCI_DM365_BV	3188
 ag5evm			MACH_AG5EVM		AG5EVM			3189
-sc575plc		MACH_SC575PLC		SC575PLC		3190
-sc575hmi		MACH_SC575IPC		SC575IPC		3191
-omap3_tdm3730		MACH_OMAP3_TDM3730	OMAP3_TDM3730		3192
-top9000_eval		MACH_TOP9000_EVAL	TOP9000_EVAL		3194
-top9000_su		MACH_TOP9000_SU		TOP9000_SU		3195
-utm300			MACH_UTM300		UTM300			3196
 tsunagi			MACH_TSUNAGI		TSUNAGI			3197
-ts75xx			MACH_TS75XX		TS75XX			3198
-ts47xx			MACH_TS47XX		TS47XX			3200
-da850_k5		MACH_DA850_K5		DA850_K5		3201
-ax502			MACH_AX502		AX502			3202
-igep0032		MACH_IGEP0032		IGEP0032		3203
-antero			MACH_ANTERO		ANTERO			3204
-synergy			MACH_SYNERGY		SYNERGY			3205
 ics_if_voip		MACH_ICS_IF_VOIP	ICS_IF_VOIP		3206
 wlf_cragg_6410		MACH_WLF_CRAGG_6410	WLF_CRAGG_6410		3207
-punica			MACH_PUNICA		PUNICA			3208
 trimslice		MACH_TRIMSLICE		TRIMSLICE		3209
-mx27_wmultra		MACH_MX27_WMULTRA	MX27_WMULTRA		3210
 mackerel		MACH_MACKEREL		MACKEREL		3211
-fa9x27			MACH_FA9X27		FA9X27			3213
-ns2816tb		MACH_NS2816TB		NS2816TB		3214
-ns2816_ntpad		MACH_NS2816_NTPAD	NS2816_NTPAD		3215
-ns2816_ntnb		MACH_NS2816_NTNB	NS2816_NTNB		3216
 kaen			MACH_KAEN		KAEN			3217
-nv1000			MACH_NV1000		NV1000			3218
-nuc950ts		MACH_NUC950TS		NUC950TS		3219
 nokia_rm680		MACH_NOKIA_RM680	NOKIA_RM680		3220
-ast2200			MACH_AST2200		AST2200			3221
-lead			MACH_LEAD		LEAD			3222
-unino1			MACH_UNINO1		UNINO1			3223
-greeco			MACH_GREECO		GREECO			3224
-verdi			MACH_VERDI		VERDI			3225
 dm6446_adbox		MACH_DM6446_ADBOX	DM6446_ADBOX		3226
 quad_salsa		MACH_QUAD_SALSA		QUAD_SALSA		3227
 abb_gma_1_1		MACH_ABB_GMA_1_1	ABB_GMA_1_1		3228
@@ -949,13 +621,11 @@ koi			MACH_KOI		KOI			3312
 ts4800			MACH_TS4800		TS4800			3313
 tqma9263		MACH_TQMA9263		TQMA9263		3314
 holiday			MACH_HOLIDAY		HOLIDAY			3315
-dma_6410		MACH_DMA6410		DMA6410			3316
 pcats_overlay		MACH_PCATS_OVERLAY	PCATS_OVERLAY		3317
 hwgw6410		MACH_HWGW6410		HWGW6410		3318
 shenzhou		MACH_SHENZHOU		SHENZHOU		3319
 cwme9210		MACH_CWME9210		CWME9210		3320
 cwme9210js		MACH_CWME9210JS		CWME9210JS		3321
-pgs_v1			MACH_PGS_SITARA		PGS_SITARA		3322
 colibri_tegra2		MACH_COLIBRI_TEGRA2	COLIBRI_TEGRA2		3323
 w21			MACH_W21		W21			3324
 polysat1		MACH_POLYSAT1		POLYSAT1		3325
@@ -1021,13 +691,11 @@ viprinet		MACH_VIPRINET		VIPRINET		3385
 bockw			MACH_BOCKW		BOCKW			3386
 eva2000			MACH_EVA2000		EVA2000			3387
 steelyard		MACH_STEELYARD		STEELYARD		3388
-sdh001			MACH_MACH_SDH001	MACH_SDH001		3390
 nsslsboard		MACH_NSSLSBOARD		NSSLSBOARD		3392
 geneva_b5		MACH_GENEVA_B5		GENEVA_B5		3393
 spear1340		MACH_SPEAR1340		SPEAR1340		3394
 rexmas			MACH_REXMAS		REXMAS			3395
 msm8960_cdp		MACH_MSM8960_CDP	MSM8960_CDP		3396
-msm8960_mdp		MACH_MSM8960_MDP	MSM8960_MDP		3397
 msm8960_fluid		MACH_MSM8960_FLUID	MSM8960_FLUID		3398
 msm8960_apq		MACH_MSM8960_APQ	MSM8960_APQ		3399
 helios_v2		MACH_HELIOS_V2		HELIOS_V2		3400
@@ -1123,5 +791,381 @@ blissc			MACH_BLISSC		BLISSC			3491
 thales_adc		MACH_THALES_ADC		THALES_ADC		3492
 ubisys_p9d_evp		MACH_UBISYS_P9D_EVP	UBISYS_P9D_EVP		3493
 atdgp318		MACH_ATDGP318		ATDGP318		3494
+dma210u			MACH_DMA210U		DMA210U			3495
+em_t3			MACH_EM_T3		EM_T3			3496
+htx3250			MACH_HTX3250		HTX3250			3497
+g50			MACH_G50		G50			3498
+eco5			MACH_ECO5		ECO5			3499
+wintergrasp		MACH_WINTERGRASP	WINTERGRASP		3500
+puro			MACH_PURO		PURO			3501
+shooter_k		MACH_SHOOTER_K		SHOOTER_K		3502
+nspire			MACH_NSPIRE		NSPIRE			3503
+mickxx			MACH_MICKXX		MICKXX			3504
+lxmb			MACH_LXMB		LXMB			3505
+adam			MACH_ADAM		ADAM			3507
+b1004			MACH_B1004		B1004			3508
+oboea			MACH_OBOEA		OBOEA			3509
+a1015			MACH_A1015		A1015			3510
+robin_vbdt30		MACH_ROBIN_VBDT30	ROBIN_VBDT30		3511
+tegra_enterprise	MACH_TEGRA_ENTERPRISE	TEGRA_ENTERPRISE	3512
+rfl108200_mk10		MACH_RFL108200_MK10	RFL108200_MK10		3513
+rfl108300_mk16		MACH_RFL108300_MK16	RFL108300_MK16		3514
+rover_v7		MACH_ROVER_V7		ROVER_V7		3515
+miphone			MACH_MIPHONE		MIPHONE			3516
+femtobts		MACH_FEMTOBTS		FEMTOBTS		3517
+monopoli		MACH_MONOPOLI		MONOPOLI		3518
+boss			MACH_BOSS		BOSS			3519
+davinci_dm368_vtam	MACH_DAVINCI_DM368_VTAM	DAVINCI_DM368_VTAM	3520
+clcon			MACH_CLCON		CLCON			3521
+nokia_rm696		MACH_NOKIA_RM696	NOKIA_RM696		3522
+tahiti			MACH_TAHITI		TAHITI			3523
+fighter			MACH_FIGHTER		FIGHTER			3524
+sgh_i710		MACH_SGH_I710		SGH_I710		3525
+integreproscb		MACH_INTEGREPROSCB	INTEGREPROSCB		3526
+monza			MACH_MONZA		MONZA			3527
+calimain		MACH_CALIMAIN		CALIMAIN		3528
+mx6q_sabreauto		MACH_MX6Q_SABREAUTO	MX6Q_SABREAUTO		3529
+gma01x			MACH_GMA01X		GMA01X			3530
+sbc51			MACH_SBC51		SBC51			3531
+fit			MACH_FIT		FIT			3532
+steelhead		MACH_STEELHEAD		STEELHEAD		3533
+panther			MACH_PANTHER		PANTHER			3534
+msm8960_liquid		MACH_MSM8960_LIQUID	MSM8960_LIQUID		3535
+lexikonct		MACH_LEXIKONCT		LEXIKONCT		3536
+ns2816_stb		MACH_NS2816_STB		NS2816_STB		3537
+sei_mm2_lpc3250		MACH_SEI_MM2_LPC3250	SEI_MM2_LPC3250		3538
+cmimx53			MACH_CMIMX53		CMIMX53			3539
+sandwich		MACH_SANDWICH		SANDWICH		3540
+chief			MACH_CHIEF		CHIEF			3541
+pogo_e02		MACH_POGO_E02		POGO_E02		3542
+mikrap_x168		MACH_MIKRAP_X168	MIKRAP_X168		3543
+htcmozart		MACH_HTCMOZART		HTCMOZART		3544
+htcgold			MACH_HTCGOLD		HTCGOLD			3545
+mt72xx			MACH_MT72XX		MT72XX			3546
+mx51_ivy		MACH_MX51_IVY		MX51_IVY		3547
+mx51_lvd		MACH_MX51_LVD		MX51_LVD		3548
+omap3_wiser2		MACH_OMAP3_WISER2	OMAP3_WISER2		3549
+dreamplug		MACH_DREAMPLUG		DREAMPLUG		3550
+cobas_c_111		MACH_COBAS_C_111	COBAS_C_111		3551
+cobas_u_411		MACH_COBAS_U_411	COBAS_U_411		3552
+hssd			MACH_HSSD		HSSD			3553
+iom35x			MACH_IOM35X		IOM35X			3554
+psom_omap		MACH_PSOM_OMAP		PSOM_OMAP		3555
+iphone_2g		MACH_IPHONE_2G		IPHONE_2G		3556
+iphone_3g		MACH_IPHONE_3G		IPHONE_3G		3557
+ipod_touch_1g		MACH_IPOD_TOUCH_1G	IPOD_TOUCH_1G		3558
+pharos_tpc		MACH_PHAROS_TPC		PHAROS_TPC		3559
+mx53_hydra		MACH_MX53_HYDRA		MX53_HYDRA		3560
+ns2816_dev_board	MACH_NS2816_DEV_BOARD	NS2816_DEV_BOARD	3561
+iphone_3gs		MACH_IPHONE_3GS		IPHONE_3GS		3562
+iphone_4		MACH_IPHONE_4		IPHONE_4		3563
+ipod_touch_4g		MACH_IPOD_TOUCH_4G	IPOD_TOUCH_4G		3564
+dragon_e1100		MACH_DRAGON_E1100	DRAGON_E1100		3565
+topside			MACH_TOPSIDE		TOPSIDE			3566
+irisiii			MACH_IRISIII		IRISIII			3567
+deto_macarm9		MACH_DETO_MACARM9	DETO_MACARM9		3568
+eti_d1			MACH_ETI_D1		ETI_D1			3569
+som3530sdk		MACH_SOM3530SDK		SOM3530SDK		3570
+oc_engine		MACH_OC_ENGINE		OC_ENGINE		3571
+apq8064_sim		MACH_APQ8064_SIM	APQ8064_SIM		3572
+alps			MACH_ALPS		ALPS			3575
+tny_t3730		MACH_TNY_T3730		TNY_T3730		3576
+geryon_nfe		MACH_GERYON_NFE		GERYON_NFE		3577
+ns2816_ref_board	MACH_NS2816_REF_BOARD	NS2816_REF_BOARD	3578
+silverstone		MACH_SILVERSTONE	SILVERSTONE		3579
+mtt2440			MACH_MTT2440		MTT2440			3580
+ynicdb			MACH_YNICDB		YNICDB			3581
+bct			MACH_BCT		BCT			3582
+tuscan			MACH_TUSCAN		TUSCAN			3583
+xbt_sam9g45		MACH_XBT_SAM9G45	XBT_SAM9G45		3584
+enbw_cmc		MACH_ENBW_CMC		ENBW_CMC		3585
+ch104mx257		MACH_CH104MX257		CH104MX257		3587
+openpri			MACH_OPENPRI		OPENPRI			3588
+am335xevm		MACH_AM335XEVM		AM335XEVM		3589
+picodmb			MACH_PICODMB		PICODMB			3590
+waluigi			MACH_WALUIGI		WALUIGI			3591
+punicag7		MACH_PUNICAG7		PUNICAG7		3592
+ipad_1g			MACH_IPAD_1G		IPAD_1G			3593
+appletv_2g		MACH_APPLETV_2G		APPLETV_2G		3594
+mach_ecog45		MACH_MACH_ECOG45	MACH_ECOG45		3595
+ait_cam_enc_4xx		MACH_AIT_CAM_ENC_4XX	AIT_CAM_ENC_4XX		3596
+runnymede		MACH_RUNNYMEDE		RUNNYMEDE		3597
+play			MACH_PLAY		PLAY			3598
+hw90260			MACH_HW90260		HW90260			3599
+tagh			MACH_TAGH		TAGH			3600
+filbert			MACH_FILBERT		FILBERT			3601
+getinge_netcomv3	MACH_GETINGE_NETCOMV3	GETINGE_NETCOMV3	3602
+cw20			MACH_CW20		CW20			3603
+cinema			MACH_CINEMA		CINEMA			3604
+cinema_tea		MACH_CINEMA_TEA		CINEMA_TEA		3605
+cinema_coffee		MACH_CINEMA_COFFEE	CINEMA_COFFEE		3606
+cinema_juice		MACH_CINEMA_JUICE	CINEMA_JUICE		3607
+mx53_mirage2		MACH_MX53_MIRAGE2	MX53_MIRAGE2		3609
+mx53_efikasb		MACH_MX53_EFIKASB	MX53_EFIKASB		3610
+stm_b2000		MACH_STM_B2000		STM_B2000		3612
+m28evk			MACH_M28EVK		M28EVK			3613
+pda			MACH_PDA		PDA			3614
+meraki_mr58		MACH_MERAKI_MR58	MERAKI_MR58		3615
+kota2			MACH_KOTA2		KOTA2			3616
+letcool			MACH_LETCOOL		LETCOOL			3617
+mx27iat			MACH_MX27IAT		MX27IAT			3618
+apollo_td		MACH_APOLLO_TD		APOLLO_TD		3619
+arena			MACH_ARENA		ARENA			3620
+gsngateway		MACH_GSNGATEWAY		GSNGATEWAY		3621
+lf2000			MACH_LF2000		LF2000			3622
+bonito			MACH_BONITO		BONITO			3623
+asymptote		MACH_ASYMPTOTE		ASYMPTOTE		3624
+bst2brd			MACH_BST2BRD		BST2BRD			3625
+tx335s			MACH_TX335S		TX335S			3626
+pelco_tesla		MACH_PELCO_TESLA	PELCO_TESLA		3627
+rrhtestplat		MACH_RRHTESTPLAT	RRHTESTPLAT		3628
+vidtonic_pro		MACH_VIDTONIC_PRO	VIDTONIC_PRO		3629
+pl_apollo		MACH_PL_APOLLO		PL_APOLLO		3630
+pl_phoenix		MACH_PL_PHOENIX		PL_PHOENIX		3631
+m28cu3			MACH_M28CU3		M28CU3			3632
+vvbox_hd		MACH_VVBOX_HD		VVBOX_HD		3633
+coreware_sam9260_	MACH_COREWARE_SAM9260_	COREWARE_SAM9260_	3634
+marmaduke		MACH_MARMADUKE		MARMADUKE		3635
+amg_xlcore_camera	MACH_AMG_XLCORE_CAMERA	AMG_XLCORE_CAMERA	3636
+omap3_egf		MACH_OMAP3_EGF		OMAP3_EGF		3637
 smdk4212		MACH_SMDK4212		SMDK4212		3638
+dnp9200			MACH_DNP9200		DNP9200			3639
+tf101			MACH_TF101		TF101			3640
+omap3silvio		MACH_OMAP3SILVIO	OMAP3SILVIO		3641
+picasso2		MACH_PICASSO2		PICASSO2		3642
+vangogh2		MACH_VANGOGH2		VANGOGH2		3643
+olpc_xo_1_75		MACH_OLPC_XO_1_75	OLPC_XO_1_75		3644
+gx400			MACH_GX400		GX400			3645
+gs300			MACH_GS300		GS300			3646
+acer_a9			MACH_ACER_A9		ACER_A9			3647
+vivow_evm		MACH_VIVOW_EVM		VIVOW_EVM		3648
+veloce_cxq		MACH_VELOCE_CXQ		VELOCE_CXQ		3649
+veloce_cxm		MACH_VELOCE_CXM		VELOCE_CXM		3650
+p1852			MACH_P1852		P1852			3651
+naxy100			MACH_NAXY100		NAXY100			3652
+taishan			MACH_TAISHAN		TAISHAN			3653
+touchlink		MACH_TOUCHLINK		TOUCHLINK		3654
+stm32f103ze		MACH_STM32F103ZE	STM32F103ZE		3655
+mcx			MACH_MCX		MCX			3656
+stm_nmhdk_fli7610	MACH_STM_NMHDK_FLI7610	STM_NMHDK_FLI7610	3657
+top28x			MACH_TOP28X		TOP28X			3658
+okl4vp_microvisor	MACH_OKL4VP_MICROVISOR	OKL4VP_MICROVISOR	3659
+pop			MACH_POP		POP			3660
+layer			MACH_LAYER		LAYER			3661
+trondheim		MACH_TRONDHEIM		TRONDHEIM		3662
+eva			MACH_EVA		EVA			3663
+trust_taurus		MACH_TRUST_TAURUS	TRUST_TAURUS		3664
+ns2816_huashan		MACH_NS2816_HUASHAN	NS2816_HUASHAN		3665
+ns2816_yangcheng	MACH_NS2816_YANGCHENG	NS2816_YANGCHENG	3666
+p852			MACH_P852		P852			3667
+flea3			MACH_FLEA3		FLEA3			3668
+bowfin			MACH_BOWFIN		BOWFIN			3669
+mv88de3100		MACH_MV88DE3100		MV88DE3100		3670
+pia_am35x		MACH_PIA_AM35X		PIA_AM35X		3671
+cedar			MACH_CEDAR		CEDAR			3672
+picasso_e		MACH_PICASSO_E		PICASSO_E		3673
+samsung_e60		MACH_SAMSUNG_E60	SAMSUNG_E60		3674
+sdvr_mini		MACH_SDVR_MINI		SDVR_MINI		3676
+omap3_ij3k		MACH_OMAP3_IJ3K		OMAP3_IJ3K		3677
+modasmc1		MACH_MODASMC1		MODASMC1		3678
+apq8064_rumi3		MACH_APQ8064_RUMI3	APQ8064_RUMI3		3679
+matrix506		MACH_MATRIX506		MATRIX506		3680
+msm9615_mtp		MACH_MSM9615_MTP	MSM9615_MTP		3681
+dm36x_spawndc		MACH_DM36X_SPAWNDC	DM36X_SPAWNDC		3682
+sff792			MACH_SFF792		SFF792			3683
+am335xiaevm		MACH_AM335XIAEVM	AM335XIAEVM		3684
+g3c2440			MACH_G3C2440		G3C2440			3685
+tion270			MACH_TION270		TION270			3686
+w22q7arm02		MACH_W22Q7ARM02		W22Q7ARM02		3687
+omap_cat		MACH_OMAP_CAT		OMAP_CAT		3688
+at91sam9n12ek		MACH_AT91SAM9N12EK	AT91SAM9N12EK		3689
+morrison		MACH_MORRISON		MORRISON		3690
+svdu			MACH_SVDU		SVDU			3691
+lpp01			MACH_LPP01		LPP01			3692
+ubc283			MACH_UBC283		UBC283			3693
+zeppelin		MACH_ZEPPELIN		ZEPPELIN		3694
+motus			MACH_MOTUS		MOTUS			3695
+neomainboard		MACH_NEOMAINBOARD	NEOMAINBOARD		3696
+devkit3250		MACH_DEVKIT3250		DEVKIT3250		3697
+devkit7000		MACH_DEVKIT7000		DEVKIT7000		3698
+fmc_uic			MACH_FMC_UIC		FMC_UIC			3699
+fmc_dcm			MACH_FMC_DCM		FMC_DCM			3700
+batwm			MACH_BATWM		BATWM			3701
+atlas6cb		MACH_ATLAS6CB		ATLAS6CB		3702
+blue			MACH_BLUE		BLUE			3705
+colorado		MACH_COLORADO		COLORADO		3706
+popc			MACH_POPC		POPC			3707
+promwad_jade		MACH_PROMWAD_JADE	PROMWAD_JADE		3708
+amp			MACH_AMP		AMP			3709
+gnet_amp		MACH_GNET_AMP		GNET_AMP		3710
+toques			MACH_TOQUES		TOQUES			3711
+dct_storm		MACH_DCT_STORM		DCT_STORM		3713
+owl			MACH_OWL		OWL			3715
+cogent_csb1741		MACH_COGENT_CSB1741	COGENT_CSB1741		3716
+adillustra610		MACH_ADILLUSTRA610	ADILLUSTRA610		3718
+ecafe_na04		MACH_ECAFE_NA04		ECAFE_NA04		3719
+popct			MACH_POPCT		POPCT			3720
+omap3_helena		MACH_OMAP3_HELENA	OMAP3_HELENA		3721
+ach			MACH_ACH		ACH			3722
+module_dtb		MACH_MODULE_DTB		MODULE_DTB		3723
+oslo_elisabeth		MACH_OSLO_ELISABETH	OSLO_ELISABETH		3725
+tt01			MACH_TT01		TT01			3726
+msm8930_cdp		MACH_MSM8930_CDP	MSM8930_CDP		3727
+msm8930_mtp		MACH_MSM8930_MTP	MSM8930_MTP		3728
+msm8930_fluid		MACH_MSM8930_FLUID	MSM8930_FLUID		3729
+ltu11			MACH_LTU11		LTU11			3730
+am1808_spawnco		MACH_AM1808_SPAWNCO	AM1808_SPAWNCO		3731
+flx6410			MACH_FLX6410		FLX6410			3732
+mx6q_qsb		MACH_MX6Q_QSB		MX6Q_QSB		3733
+mx53_plt424		MACH_MX53_PLT424	MX53_PLT424		3734
+jasmine			MACH_JASMINE		JASMINE			3735
+l138_owlboard_plus	MACH_L138_OWLBOARD_PLUS	L138_OWLBOARD_PLUS	3736
+wr21			MACH_WR21		WR21			3737
+peaboy			MACH_PEABOY		PEABOY			3739
+mx28_plato		MACH_MX28_PLATO		MX28_PLATO		3740
+kacom2			MACH_KACOM2		KACOM2			3741
+slco			MACH_SLCO		SLCO			3742
+imx51pico		MACH_IMX51PICO		IMX51PICO		3743
+glink1			MACH_GLINK1		GLINK1			3744
+diamond			MACH_DIAMOND		DIAMOND			3745
+d9000			MACH_D9000		D9000			3746
+w5300e01		MACH_W5300E01		W5300E01		3747
+im6000			MACH_IM6000		IM6000			3748
+mx51_fred51		MACH_MX51_FRED51	MX51_FRED51		3749
+stm32f2			MACH_STM32F2		STM32F2			3750
+ville			MACH_VILLE		VILLE			3751
+ptip_murnau		MACH_PTIP_MURNAU	PTIP_MURNAU		3752
+ptip_classic		MACH_PTIP_CLASSIC	PTIP_CLASSIC		3753
+mx53grb			MACH_MX53GRB		MX53GRB			3754
+gagarin			MACH_GAGARIN		GAGARIN			3755
+nas2big			MACH_NAS2BIG		NAS2BIG			3757
+superfemto		MACH_SUPERFEMTO		SUPERFEMTO		3758
+teufel			MACH_TEUFEL		TEUFEL			3759
+dinara			MACH_DINARA		DINARA			3760
+vanquish		MACH_VANQUISH		VANQUISH		3761
+zipabox1		MACH_ZIPABOX1		ZIPABOX1		3762
+u9540			MACH_U9540		U9540			3763
+jet			MACH_JET		JET			3764
 smdk4412		MACH_SMDK4412		SMDK4412		3765
+elite			MACH_ELITE		ELITE			3766
+spear320_hmi		MACH_SPEAR320_HMI	SPEAR320_HMI		3767
+ontario			MACH_ONTARIO		ONTARIO			3768
+mx6q_sabrelite		MACH_MX6Q_SABRELITE	MX6Q_SABRELITE		3769
+vc200			MACH_VC200		VC200			3770
+msm7625a_ffa		MACH_MSM7625A_FFA	MSM7625A_FFA		3771
+msm7625a_surf		MACH_MSM7625A_SURF	MSM7625A_SURF		3772
+benthossbp		MACH_BENTHOSSBP		BENTHOSSBP		3773
+smdk5210		MACH_SMDK5210		SMDK5210		3774
+empq2300		MACH_EMPQ2300		EMPQ2300		3775
+minipos			MACH_MINIPOS		MINIPOS			3776
+omap5_sevm		MACH_OMAP5_SEVM		OMAP5_SEVM		3777
+shelter			MACH_SHELTER		SHELTER			3778
+omap3_devkit8500	MACH_OMAP3_DEVKIT8500	OMAP3_DEVKIT8500	3779
+edgetd			MACH_EDGETD		EDGETD			3780
+copperyard		MACH_COPPERYARD		COPPERYARD		3781
+edge			MACH_EDGE		EDGE			3782
+edge_u			MACH_EDGE_U		EDGE_U			3783
+edge_td			MACH_EDGE_TD		EDGE_TD			3784
+wdss			MACH_WDSS		WDSS			3785
+dl_pb25			MACH_DL_PB25		DL_PB25			3786
+dss11			MACH_DSS11		DSS11			3787
+cpa			MACH_CPA		CPA			3788
+aptp2000		MACH_APTP2000		APTP2000		3789
+marzen			MACH_MARZEN		MARZEN			3790
+st_turbine		MACH_ST_TURBINE		ST_TURBINE		3791
+gtl_it3300		MACH_GTL_IT3300		GTL_IT3300		3792
+mx6_mule		MACH_MX6_MULE		MX6_MULE		3793
+v7pxa_dt		MACH_V7PXA_DT		V7PXA_DT		3794
+v7mmp_dt		MACH_V7MMP_DT		V7MMP_DT		3795
+dragon7			MACH_DRAGON7		DRAGON7			3796
+krome			MACH_KROME		KROME			3797
+oratisdante		MACH_ORATISDANTE	ORATISDANTE		3798
+fathom			MACH_FATHOM		FATHOM			3799
+dns325			MACH_DNS325		DNS325			3800
+sarnen			MACH_SARNEN		SARNEN			3801
+ubisys_g1		MACH_UBISYS_G1		UBISYS_G1		3802
+mx53_pf1		MACH_MX53_PF1		MX53_PF1		3803
+asanti			MACH_ASANTI		ASANTI			3804
+volta			MACH_VOLTA		VOLTA			3805
+knight			MACH_KNIGHT		KNIGHT			3807
+beaglebone		MACH_BEAGLEBONE		BEAGLEBONE		3808
+becker			MACH_BECKER		BECKER			3809
+fc360			MACH_FC360		FC360			3810
+pmi2_xls		MACH_PMI2_XLS		PMI2_XLS		3811
+taranto			MACH_TARANTO		TARANTO			3812
+plutux			MACH_PLUTUX		PLUTUX			3813
+ipmp_medcom		MACH_IPMP_MEDCOM	IPMP_MEDCOM		3814
+absolut			MACH_ABSOLUT		ABSOLUT			3815
+awpb3			MACH_AWPB3		AWPB3			3816
+nfp32xx_dt		MACH_NFP32XX_DT		NFP32XX_DT		3817
+dl_pb53			MACH_DL_PB53		DL_PB53			3818
+acu_ii			MACH_ACU_II		ACU_II			3819
+avalon			MACH_AVALON		AVALON			3820
+sphinx			MACH_SPHINX		SPHINX			3821
+titan_t			MACH_TITAN_T		TITAN_T			3822
+harvest_boris		MACH_HARVEST_BORIS	HARVEST_BORIS		3823
+mach_msm7x30_m3s	MACH_MACH_MSM7X30_M3S	MACH_MSM7X30_M3S	3824
+smdk5250		MACH_SMDK5250		SMDK5250		3825
+imxt_lite		MACH_IMXT_LITE		IMXT_LITE		3826
+imxt_std		MACH_IMXT_STD		IMXT_STD		3827
+imxt_log		MACH_IMXT_LOG		IMXT_LOG		3828
+imxt_nav		MACH_IMXT_NAV		IMXT_NAV		3829
+imxt_full		MACH_IMXT_FULL		IMXT_FULL		3830
+ag09015			MACH_AG09015		AG09015			3831
+am3517_mt_ventoux	MACH_AM3517_MT_VENTOUX	AM3517_MT_VENTOUX	3832
+dp1arm9			MACH_DP1ARM9		DP1ARM9			3833
+picasso_m		MACH_PICASSO_M		PICASSO_M		3834
+video_gadget		MACH_VIDEO_GADGET	VIDEO_GADGET		3835
+mtt_om3x		MACH_MTT_OM3X		MTT_OM3X		3836
+mx6q_arm2		MACH_MX6Q_ARM2		MX6Q_ARM2		3837
+picosam9g45		MACH_PICOSAM9G45	PICOSAM9G45		3838
+vpm_dm365		MACH_VPM_DM365		VPM_DM365		3839
+bonfire			MACH_BONFIRE		BONFIRE			3840
+mt2p2d			MACH_MT2P2D		MT2P2D			3841
+sigpda01		MACH_SIGPDA01		SIGPDA01		3842
+cn27			MACH_CN27		CN27			3843
+mx25_cwtap		MACH_MX25_CWTAP		MX25_CWTAP		3844
+apf28			MACH_APF28		APF28			3845
+pelco_maxwell		MACH_PELCO_MAXWELL	PELCO_MAXWELL		3846
+ge_phoenix		MACH_GE_PHOENIX		GE_PHOENIX		3847
+empc_a500		MACH_EMPC_A500		EMPC_A500		3848
+ims_arm9		MACH_IMS_ARM9		IMS_ARM9		3849
+mini2416		MACH_MINI2416		MINI2416		3850
+mini2450		MACH_MINI2450		MINI2450		3851
+mini310			MACH_MINI310		MINI310			3852
+spear_hurricane		MACH_SPEAR_HURRICANE	SPEAR_HURRICANE		3853
+mt7208			MACH_MT7208		MT7208			3854
+lpc178x			MACH_LPC178X		LPC178X			3855
+farleys			MACH_FARLEYS		FARLEYS			3856
+efm32gg_dk3750		MACH_EFM32GG_DK3750	EFM32GG_DK3750		3857
+zeus_board		MACH_ZEUS_BOARD		ZEUS_BOARD		3858
+cc51			MACH_CC51		CC51			3859
+fxi_c210		MACH_FXI_C210		FXI_C210		3860
+msm8627_cdp		MACH_MSM8627_CDP	MSM8627_CDP		3861
+msm8627_mtp		MACH_MSM8627_MTP	MSM8627_MTP		3862
+armadillo800eva		MACH_ARMADILLO800EVA	ARMADILLO800EVA		3863
+primou			MACH_PRIMOU		PRIMOU			3864
+primoc			MACH_PRIMOC		PRIMOC			3865
+primoct			MACH_PRIMOCT		PRIMOCT			3866
+a9500			MACH_A9500		A9500			3867
+pluto			MACH_PLUTO		PLUTO			3869
+acfx100			MACH_ACFX100		ACFX100			3870
+msm8625_rumi3		MACH_MSM8625_RUMI3	MSM8625_RUMI3		3871
+valente			MACH_VALENTE		VALENTE			3872
+crfs_rfeye		MACH_CRFS_RFEYE		CRFS_RFEYE		3873
+rfeye			MACH_RFEYE		RFEYE			3874
+phidget_sbc3		MACH_PHIDGET_SBC3	PHIDGET_SBC3		3875
+tcw_mika		MACH_TCW_MIKA		TCW_MIKA		3876
+imx28_egf		MACH_IMX28_EGF		IMX28_EGF		3877
+valente_wx		MACH_VALENTE_WX		VALENTE_WX		3878
+huangshans		MACH_HUANGSHANS		HUANGSHANS		3879
+bosphorus1		MACH_BOSPHORUS1		BOSPHORUS1		3880
+prima			MACH_PRIMA		PRIMA			3881
+evita_ulk		MACH_EVITA_ULK		EVITA_ULK		3884
+merisc600		MACH_MERISC600		MERISC600		3885
+dolak			MACH_DOLAK		DOLAK			3886
+sbc53			MACH_SBC53		SBC53			3887
+elite_ulk		MACH_ELITE_ULK		ELITE_ULK		3888
+pov2			MACH_POV2		POV2			3889
+ipod_touch_2g		MACH_IPOD_TOUCH_2G	IPOD_TOUCH_2G		3890
+da850_pqab		MACH_DA850_PQAB		DA850_PQAB		3891
diff --git a/arch/avr32/boards/merisc/merisc_sysfs.c b/arch/avr32/boards/merisc/merisc_sysfs.c
index df431fd..5a25231 100644
--- a/arch/avr32/boards/merisc/merisc_sysfs.c
+++ b/arch/avr32/boards/merisc/merisc_sysfs.c
@@ -13,7 +13,6 @@
 #include <linux/list.h>
 #include <linux/spinlock.h>
 #include <linux/device.h>
-#include <linux/sysdev.h>
 #include <linux/timer.h>
 #include <linux/err.h>
 #include <linux/ctype.h>
diff --git a/arch/avr32/include/asm/ipcbuf.h b/arch/avr32/include/asm/ipcbuf.h
index 1552c96..84c7e51 100644
--- a/arch/avr32/include/asm/ipcbuf.h
+++ b/arch/avr32/include/asm/ipcbuf.h
@@ -1,29 +1 @@
-#ifndef __ASM_AVR32_IPCBUF_H
-#define __ASM_AVR32_IPCBUF_H
-
-/*
-* The user_ipc_perm structure for AVR32 architecture.
-* Note extra padding because this structure is passed back and forth
-* between kernel and user space.
-*
-* Pad space is left for:
-* - 32-bit mode_t and seq
-* - 2 miscellaneous 32-bit values
-*/
-
-struct ipc64_perm
-{
-        __kernel_key_t          key;
-        __kernel_uid32_t        uid;
-        __kernel_gid32_t        gid;
-        __kernel_uid32_t        cuid;
-        __kernel_gid32_t        cgid;
-        __kernel_mode_t         mode;
-        unsigned short          __pad1;
-        unsigned short          seq;
-        unsigned short          __pad2;
-        unsigned long           __unused1;
-        unsigned long           __unused2;
-};
-
-#endif /* __ASM_AVR32_IPCBUF_H */
+#include <asm-generic/ipcbuf.h>
diff --git a/arch/avr32/include/asm/socket.h b/arch/avr32/include/asm/socket.h
index c8d1fae..247b88c 100644
--- a/arch/avr32/include/asm/socket.h
+++ b/arch/avr32/include/asm/socket.h
@@ -62,4 +62,7 @@
 
 #define SO_RXQ_OVFL             40
 
+#define SO_WIFI_STATUS		41
+#define SCM_WIFI_STATUS		SO_WIFI_STATUS
+
 #endif /* __ASM_AVR32_SOCKET_H */
diff --git a/arch/avr32/include/asm/thread_info.h b/arch/avr32/include/asm/thread_info.h
index 7a9c03d..e5deda4 100644
--- a/arch/avr32/include/asm/thread_info.h
+++ b/arch/avr32/include/asm/thread_info.h
@@ -85,7 +85,6 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_RESTORE_SIGMASK	7	/* restore signal mask in do_signal */
 #define TIF_CPU_GOING_TO_SLEEP	8	/* CPU is entering sleep 0 mode */
 #define TIF_NOTIFY_RESUME	9	/* callback before returning to user */
-#define TIF_FREEZE		29
 #define TIF_DEBUG		30	/* debugging enabled */
 #define TIF_USERSPACE		31      /* true if FS sets userspace */
 
@@ -98,7 +97,6 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_RESTORE_SIGMASK	(1 << TIF_RESTORE_SIGMASK)
 #define _TIF_CPU_GOING_TO_SLEEP (1 << TIF_CPU_GOING_TO_SLEEP)
 #define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
-#define _TIF_FREEZE		(1 << TIF_FREEZE)
 
 /* Note: The masks below must never span more than 16 bits! */
 
diff --git a/arch/avr32/include/asm/types.h b/arch/avr32/include/asm/types.h
index 72667a3..9bb2d8b 100644
--- a/arch/avr32/include/asm/types.h
+++ b/arch/avr32/include/asm/types.h
@@ -10,12 +10,6 @@
 
 #include <asm-generic/int-ll64.h>
 
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-#endif /* __ASSEMBLY__ */
-
 /*
  * These aren't exported outside the kernel to avoid name space clashes
  */
diff --git a/arch/avr32/kernel/cpu.c b/arch/avr32/kernel/cpu.c
index e84faff..2233be7 100644
--- a/arch/avr32/kernel/cpu.c
+++ b/arch/avr32/kernel/cpu.c
@@ -6,7 +6,7 @@
  * published by the Free Software Foundation.
  */
 #include <linux/init.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/seq_file.h>
 #include <linux/cpu.h>
 #include <linux/module.h>
@@ -26,16 +26,16 @@ static DEFINE_PER_CPU(struct cpu, cpu_devices);
  * XXX: If/when a SMP-capable implementation of AVR32 will ever be
  * made, we must make sure that the code executes on the correct CPU.
  */
-static ssize_t show_pc0event(struct sys_device *dev,
-			struct sysdev_attribute *attr, char *buf)
+static ssize_t show_pc0event(struct device *dev,
+			struct device_attribute *attr, char *buf)
 {
 	unsigned long pccr;
 
 	pccr = sysreg_read(PCCR);
 	return sprintf(buf, "0x%lx\n", (pccr >> 12) & 0x3f);
 }
-static ssize_t store_pc0event(struct sys_device *dev,
-			struct sysdev_attribute *attr, const char *buf,
+static ssize_t store_pc0event(struct device *dev,
+			struct device_attribute *attr, const char *buf,
 			      size_t count)
 {
 	unsigned long val;
@@ -48,16 +48,16 @@ static ssize_t store_pc0event(struct sys_device *dev,
 	sysreg_write(PCCR, val);
 	return count;
 }
-static ssize_t show_pc0count(struct sys_device *dev,
-			struct sysdev_attribute *attr, char *buf)
+static ssize_t show_pc0count(struct device *dev,
+			struct device_attribute *attr, char *buf)
 {
 	unsigned long pcnt0;
 
 	pcnt0 = sysreg_read(PCNT0);
 	return sprintf(buf, "%lu\n", pcnt0);
 }
-static ssize_t store_pc0count(struct sys_device *dev,
-				struct sysdev_attribute *attr,
+static ssize_t store_pc0count(struct device *dev,
+				struct device_attribute *attr,
 				const char *buf, size_t count)
 {
 	unsigned long val;
@@ -71,16 +71,16 @@ static ssize_t store_pc0count(struct sys_device *dev,
 	return count;
 }
 
-static ssize_t show_pc1event(struct sys_device *dev,
-				struct sysdev_attribute *attr, char *buf)
+static ssize_t show_pc1event(struct device *dev,
+				struct device_attribute *attr, char *buf)
 {
 	unsigned long pccr;
 
 	pccr = sysreg_read(PCCR);
 	return sprintf(buf, "0x%lx\n", (pccr >> 18) & 0x3f);
 }
-static ssize_t store_pc1event(struct sys_device *dev,
-			      struct sysdev_attribute *attr, const char *buf,
+static ssize_t store_pc1event(struct device *dev,
+			      struct device_attribute *attr, const char *buf,
 			      size_t count)
 {
 	unsigned long val;
@@ -93,16 +93,16 @@ static ssize_t store_pc1event(struct sys_device *dev,
 	sysreg_write(PCCR, val);
 	return count;
 }
-static ssize_t show_pc1count(struct sys_device *dev,
-				struct sysdev_attribute *attr, char *buf)
+static ssize_t show_pc1count(struct device *dev,
+				struct device_attribute *attr, char *buf)
 {
 	unsigned long pcnt1;
 
 	pcnt1 = sysreg_read(PCNT1);
 	return sprintf(buf, "%lu\n", pcnt1);
 }
-static ssize_t store_pc1count(struct sys_device *dev,
-				struct sysdev_attribute *attr, const char *buf,
+static ssize_t store_pc1count(struct device *dev,
+				struct device_attribute *attr, const char *buf,
 			      size_t count)
 {
 	unsigned long val;
@@ -116,16 +116,16 @@ static ssize_t store_pc1count(struct sys_device *dev,
 	return count;
 }
 
-static ssize_t show_pccycles(struct sys_device *dev,
-				struct sysdev_attribute *attr, char *buf)
+static ssize_t show_pccycles(struct device *dev,
+				struct device_attribute *attr, char *buf)
 {
 	unsigned long pccnt;
 
 	pccnt = sysreg_read(PCCNT);
 	return sprintf(buf, "%lu\n", pccnt);
 }
-static ssize_t store_pccycles(struct sys_device *dev,
-				struct sysdev_attribute *attr, const char *buf,
+static ssize_t store_pccycles(struct device *dev,
+				struct device_attribute *attr, const char *buf,
 			      size_t count)
 {
 	unsigned long val;
@@ -139,16 +139,16 @@ static ssize_t store_pccycles(struct sys_device *dev,
 	return count;
 }
 
-static ssize_t show_pcenable(struct sys_device *dev,
-			struct sysdev_attribute *attr, char *buf)
+static ssize_t show_pcenable(struct device *dev,
+			struct device_attribute *attr, char *buf)
 {
 	unsigned long pccr;
 
 	pccr = sysreg_read(PCCR);
 	return sprintf(buf, "%c\n", (pccr & 1)?'1':'0');
 }
-static ssize_t store_pcenable(struct sys_device *dev,
-			      struct sysdev_attribute *attr, const char *buf,
+static ssize_t store_pcenable(struct device *dev,
+			      struct device_attribute *attr, const char *buf,
 			      size_t count)
 {
 	unsigned long pccr, val;
@@ -167,12 +167,12 @@ static ssize_t store_pcenable(struct sys_device *dev,
 	return count;
 }
 
-static SYSDEV_ATTR(pc0event, 0600, show_pc0event, store_pc0event);
-static SYSDEV_ATTR(pc0count, 0600, show_pc0count, store_pc0count);
-static SYSDEV_ATTR(pc1event, 0600, show_pc1event, store_pc1event);
-static SYSDEV_ATTR(pc1count, 0600, show_pc1count, store_pc1count);
-static SYSDEV_ATTR(pccycles, 0600, show_pccycles, store_pccycles);
-static SYSDEV_ATTR(pcenable, 0600, show_pcenable, store_pcenable);
+static DEVICE_ATTR(pc0event, 0600, show_pc0event, store_pc0event);
+static DEVICE_ATTR(pc0count, 0600, show_pc0count, store_pc0count);
+static DEVICE_ATTR(pc1event, 0600, show_pc1event, store_pc1event);
+static DEVICE_ATTR(pc1count, 0600, show_pc1count, store_pc1count);
+static DEVICE_ATTR(pccycles, 0600, show_pccycles, store_pccycles);
+static DEVICE_ATTR(pcenable, 0600, show_pcenable, store_pcenable);
 
 #endif /* CONFIG_PERFORMANCE_COUNTERS */
 
@@ -186,12 +186,12 @@ static int __init topology_init(void)
 		register_cpu(c, cpu);
 
 #ifdef CONFIG_PERFORMANCE_COUNTERS
-		sysdev_create_file(&c->sysdev, &attr_pc0event);
-		sysdev_create_file(&c->sysdev, &attr_pc0count);
-		sysdev_create_file(&c->sysdev, &attr_pc1event);
-		sysdev_create_file(&c->sysdev, &attr_pc1count);
-		sysdev_create_file(&c->sysdev, &attr_pccycles);
-		sysdev_create_file(&c->sysdev, &attr_pcenable);
+		device_create_file(&c->dev, &dev_attr_pc0event);
+		device_create_file(&c->dev, &dev_attr_pc0count);
+		device_create_file(&c->dev, &dev_attr_pc1event);
+		device_create_file(&c->dev, &dev_attr_pc1count);
+		device_create_file(&c->dev, &dev_attr_pccycles);
+		device_create_file(&c->dev, &dev_attr_pcenable);
 #endif
 	}
 
diff --git a/arch/avr32/kernel/irq.c b/arch/avr32/kernel/irq.c
index bc3aa18..900e49b 100644
--- a/arch/avr32/kernel/irq.c
+++ b/arch/avr32/kernel/irq.c
@@ -14,7 +14,7 @@
 #include <linux/kernel_stat.h>
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 
 /* May be overridden by platform code */
 int __weak nmi_enable(void)
diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c
index ef5a2a0..ea33957 100644
--- a/arch/avr32/kernel/process.c
+++ b/arch/avr32/kernel/process.c
@@ -34,10 +34,12 @@ void cpu_idle(void)
 {
 	/* endless idle loop with no priority at all */
 	while (1) {
-		tick_nohz_stop_sched_tick(1);
+		tick_nohz_idle_enter();
+		rcu_idle_enter();
 		while (!need_resched())
 			cpu_idle_sleep();
-		tick_nohz_restart_sched_tick();
+		rcu_idle_exit();
+		tick_nohz_idle_exit();
 		preempt_enable_no_resched();
 		schedule();
 		preempt_disable();
diff --git a/arch/blackfin/include/asm/thread_info.h b/arch/blackfin/include/asm/thread_info.h
index 02560fd8..53ad100 100644
--- a/arch/blackfin/include/asm/thread_info.h
+++ b/arch/blackfin/include/asm/thread_info.h
@@ -100,7 +100,6 @@ static inline struct thread_info *current_thread_info(void)
 					   TIF_NEED_RESCHED */
 #define TIF_MEMDIE		4	/* is terminating due to OOM killer */
 #define TIF_RESTORE_SIGMASK	5	/* restore signal mask in do_signal() */
-#define TIF_FREEZE		6	/* is freezing for suspend */
 #define TIF_IRQ_SYNC		7	/* sync pipeline stage */
 #define TIF_NOTIFY_RESUME	8	/* callback before returning to user */
 #define TIF_SINGLESTEP		9
@@ -111,7 +110,6 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
 #define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
-#define _TIF_FREEZE		(1<<TIF_FREEZE)
 #define _TIF_IRQ_SYNC		(1<<TIF_IRQ_SYNC)
 #define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
 #define _TIF_SINGLESTEP		(1<<TIF_SINGLESTEP)
diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
index 6a80a9e..8dd0416 100644
--- a/arch/blackfin/kernel/process.c
+++ b/arch/blackfin/kernel/process.c
@@ -88,10 +88,12 @@ void cpu_idle(void)
 #endif
 		if (!idle)
 			idle = default_idle;
-		tick_nohz_stop_sched_tick(1);
+		tick_nohz_idle_enter();
+		rcu_idle_enter();
 		while (!need_resched())
 			idle();
-		tick_nohz_restart_sched_tick();
+		rcu_idle_exit();
+		tick_nohz_idle_exit();
 		preempt_enable_no_resched();
 		schedule();
 		preempt_disable();
diff --git a/arch/cris/Kconfig.debug b/arch/cris/Kconfig.debug
index 0b9a630..14881e8 100644
--- a/arch/cris/Kconfig.debug
+++ b/arch/cris/Kconfig.debug
@@ -1,6 +1,5 @@
 menu "Kernel hacking"
 
-#bool 'Debug kmalloc/kfree' CONFIG_DEBUG_MALLOC
 config PROFILING
 	bool "Kernel profiling support"
 
diff --git a/arch/cris/arch-v32/kernel/time.c b/arch/cris/arch-v32/kernel/time.c
index bb978ed..6773fc8 100644
--- a/arch/cris/arch-v32/kernel/time.c
+++ b/arch/cris/arch-v32/kernel/time.c
@@ -47,14 +47,12 @@ static struct clocksource cont_rotime = {
 	.rating = 300,
 	.read   = read_cont_rotime,
 	.mask   = CLOCKSOURCE_MASK(32),
-	.shift  = 10,
 	.flags  = CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
 static int __init etrax_init_cont_rotime(void)
 {
-	cont_rotime.mult = clocksource_khz2mult(100000, cont_rotime.shift);
-	clocksource_register(&cont_rotime);
+	clocksource_register_khz(&cont_rotime, 100000);
 	return 0;
 }
 arch_initcall(etrax_init_cont_rotime);
diff --git a/arch/cris/include/asm/ipcbuf.h b/arch/cris/include/asm/ipcbuf.h
index 8b0c18b..84c7e51 100644
--- a/arch/cris/include/asm/ipcbuf.h
+++ b/arch/cris/include/asm/ipcbuf.h
@@ -1,29 +1 @@
-#ifndef __CRIS_IPCBUF_H__
-#define __CRIS_IPCBUF_H__
-
-/*
- * The user_ipc_perm structure for CRIS architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit mode_t and seq
- * - 2 miscellaneous 32-bit values
- */
-
-struct ipc64_perm
-{
-	__kernel_key_t		key;
-	__kernel_uid32_t	uid;
-	__kernel_gid32_t	gid;
-	__kernel_uid32_t	cuid;
-	__kernel_gid32_t	cgid;
-	__kernel_mode_t		mode;
-	unsigned short		__pad1;
-	unsigned short		seq;
-	unsigned short		__pad2;
-	unsigned long		__unused1;
-	unsigned long		__unused2;
-};
-
-#endif /* __CRIS_IPCBUF_H__ */
+#include <asm-generic/ipcbuf.h>
diff --git a/arch/cris/include/asm/socket.h b/arch/cris/include/asm/socket.h
index 1a4a619..e269264 100644
--- a/arch/cris/include/asm/socket.h
+++ b/arch/cris/include/asm/socket.h
@@ -64,6 +64,9 @@
 
 #define SO_RXQ_OVFL             40
 
+#define SO_WIFI_STATUS		41
+#define SCM_WIFI_STATUS		SO_WIFI_STATUS
+
 #endif /* _ASM_SOCKET_H */
 
 
diff --git a/arch/cris/include/asm/thread_info.h b/arch/cris/include/asm/thread_info.h
index 332f19c..29b9288 100644
--- a/arch/cris/include/asm/thread_info.h
+++ b/arch/cris/include/asm/thread_info.h
@@ -86,7 +86,6 @@ struct thread_info {
 #define TIF_RESTORE_SIGMASK	9	/* restore signal mask in do_signal() */
 #define TIF_POLLING_NRFLAG	16	/* true if poll_idle() is polling TIF_NEED_RESCHED */
 #define TIF_MEMDIE		17	/* is terminating due to OOM killer */
-#define TIF_FREEZE		18	/* is freezing for suspend */
 
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
 #define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
@@ -94,7 +93,6 @@ struct thread_info {
 #define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
 #define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
-#define _TIF_FREEZE		(1<<TIF_FREEZE)
 
 #define _TIF_WORK_MASK		0x0000FFFE	/* work to do on interrupt/exception return */
 #define _TIF_ALLWORK_MASK	0x0000FFFF	/* work to do on any return to u-space */
diff --git a/arch/cris/include/asm/types.h b/arch/cris/include/asm/types.h
index 551a12c..adaf827 100644
--- a/arch/cris/include/asm/types.h
+++ b/arch/cris/include/asm/types.h
@@ -3,12 +3,6 @@
 
 #include <asm-generic/int-ll64.h>
 
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-#endif /* __ASSEMBLY__ */
-
 /*
  * These aren't exported outside the kernel to avoid name space clashes
  */
diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig
index bad27a6..c5e69ab 100644
--- a/arch/frv/Kconfig
+++ b/arch/frv/Kconfig
@@ -341,16 +341,6 @@ source "drivers/pci/Kconfig"
 
 source "drivers/pcmcia/Kconfig"
 
-#config MATH_EMULATION
-#	bool "Math emulation support (EXPERIMENTAL)"
-#	depends on EXPERIMENTAL
-#	help
-#	  At some point in the future, this will cause floating-point math
-#	  instructions to be emulated by the kernel on machines that lack a
-#	  floating-point math coprocessor.  Thrill-seekers and chronically
-#	  sleep-deprived psychotic hacker types can say Y now, everyone else
-#	  should probably wait a while.
-
 menu "Power management options"
 
 config ARCH_SUSPEND_POSSIBLE
diff --git a/arch/frv/include/asm/ipcbuf.h b/arch/frv/include/asm/ipcbuf.h
index b546f67..84c7e51 100644
--- a/arch/frv/include/asm/ipcbuf.h
+++ b/arch/frv/include/asm/ipcbuf.h
@@ -1,30 +1 @@
-#ifndef __ASM_IPCBUF_H__
-#define __ASM_IPCBUF_H__
-
-/*
- * The user_ipc_perm structure for FR-V architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit mode_t and seq
- * - 2 miscellaneous 32-bit values
- */
-
-struct ipc64_perm
-{
-	__kernel_key_t		key;
-	__kernel_uid32_t	uid;
-	__kernel_gid32_t	gid;
-	__kernel_uid32_t	cuid;
-	__kernel_gid32_t	cgid;
-	__kernel_mode_t		mode;
-	unsigned short		__pad1;
-	unsigned short		seq;
-	unsigned short		__pad2;
-	unsigned long		__unused1;
-	unsigned long		__unused2;
-};
-
-#endif /* __ASM_IPCBUF_H__ */
-
+#include <asm-generic/ipcbuf.h>
diff --git a/arch/frv/include/asm/socket.h b/arch/frv/include/asm/socket.h
index a6b2688..ce80fda 100644
--- a/arch/frv/include/asm/socket.h
+++ b/arch/frv/include/asm/socket.h
@@ -62,5 +62,8 @@
 
 #define SO_RXQ_OVFL             40
 
+#define SO_WIFI_STATUS		41
+#define SCM_WIFI_STATUS		SO_WIFI_STATUS
+
 #endif /* _ASM_SOCKET_H */
 
diff --git a/arch/frv/include/asm/thread_info.h b/arch/frv/include/asm/thread_info.h
index cefbe73..92d83ea 100644
--- a/arch/frv/include/asm/thread_info.h
+++ b/arch/frv/include/asm/thread_info.h
@@ -111,7 +111,6 @@ register struct thread_info *__current_thread_info asm("gr15");
 #define TIF_RESTORE_SIGMASK	5	/* restore signal mask in do_signal() */
 #define TIF_POLLING_NRFLAG	16	/* true if poll_idle() is polling TIF_NEED_RESCHED */
 #define TIF_MEMDIE		17	/* is terminating due to OOM killer */
-#define TIF_FREEZE		18	/* freezing for suspend */
 
 #define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
 #define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
@@ -120,7 +119,6 @@ register struct thread_info *__current_thread_info asm("gr15");
 #define _TIF_SINGLESTEP		(1 << TIF_SINGLESTEP)
 #define _TIF_RESTORE_SIGMASK	(1 << TIF_RESTORE_SIGMASK)
 #define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
-#define _TIF_FREEZE		(1 << TIF_FREEZE)
 
 #define _TIF_WORK_MASK		0x0000FFFE	/* work to do on interrupt/exception return */
 #define _TIF_ALLWORK_MASK	0x0000FFFF	/* work to do on any return to u-space */
diff --git a/arch/frv/include/asm/types.h b/arch/frv/include/asm/types.h
index aa3e7fd..390a612 100644
--- a/arch/frv/include/asm/types.h
+++ b/arch/frv/include/asm/types.h
@@ -14,12 +14,6 @@
 
 #include <asm-generic/int-ll64.h>
 
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-#endif /* __ASSEMBLY__ */
-
 /*
  * These aren't exported outside the kernel to avoid name space clashes
  */
diff --git a/arch/h8300/include/asm/ipcbuf.h b/arch/h8300/include/asm/ipcbuf.h
index 2cd1ebc..84c7e51 100644
--- a/arch/h8300/include/asm/ipcbuf.h
+++ b/arch/h8300/include/asm/ipcbuf.h
@@ -1,29 +1 @@
-#ifndef __H8300_IPCBUF_H__
-#define __H8300_IPCBUF_H__
-
-/*
- * The user_ipc_perm structure for H8/300 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit mode_t and seq
- * - 2 miscellaneous 32-bit values
- */
-
-struct ipc64_perm
-{
-	__kernel_key_t		key;
-	__kernel_uid32_t	uid;
-	__kernel_gid32_t	gid;
-	__kernel_uid32_t	cuid;
-	__kernel_gid32_t	cgid;
-	__kernel_mode_t		mode;
-	unsigned short		__pad1;
-	unsigned short		seq;
-	unsigned short		__pad2;
-	unsigned long		__unused1;
-	unsigned long		__unused2;
-};
-
-#endif /* __H8300_IPCBUF_H__ */
+#include <asm-generic/ipcbuf.h>
diff --git a/arch/h8300/include/asm/socket.h b/arch/h8300/include/asm/socket.h
index 04c0f45..cf1daab 100644
--- a/arch/h8300/include/asm/socket.h
+++ b/arch/h8300/include/asm/socket.h
@@ -62,4 +62,7 @@
 
 #define SO_RXQ_OVFL             40
 
+#define SO_WIFI_STATUS		41
+#define SCM_WIFI_STATUS		SO_WIFI_STATUS
+
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/h8300/include/asm/thread_info.h b/arch/h8300/include/asm/thread_info.h
index d6f1784..9c126e0 100644
--- a/arch/h8300/include/asm/thread_info.h
+++ b/arch/h8300/include/asm/thread_info.h
@@ -90,7 +90,6 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_MEMDIE		4	/* is terminating due to OOM killer */
 #define TIF_RESTORE_SIGMASK	5	/* restore signal mask in do_signal() */
 #define TIF_NOTIFY_RESUME	6	/* callback before returning to user */
-#define TIF_FREEZE		16	/* is freezing for suspend */
 
 /* as above, but as bit values */
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
@@ -99,7 +98,6 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
 #define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
 #define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
-#define _TIF_FREEZE		(1<<TIF_FREEZE)
 
 #define _TIF_WORK_MASK		0x0000FFFE	/* work to do on interrupt/exception return */
 
diff --git a/arch/h8300/include/asm/types.h b/arch/h8300/include/asm/types.h
index bb2c91a..07257d9 100644
--- a/arch/h8300/include/asm/types.h
+++ b/arch/h8300/include/asm/types.h
@@ -3,27 +3,10 @@
 
 #include <asm-generic/int-ll64.h>
 
-#if !defined(__ASSEMBLY__)
-
-/*
- * This file is never included by application software unless
- * explicitly requested (e.g., via linux/types.h) in which case the
- * application is Linux specific so (user-) name space pollution is
- * not a major issue.  However, for interoperability, libraries still
- * need to be careful to avoid a name clashes.
- */
-
-typedef unsigned short umode_t;
-
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
 #ifdef __KERNEL__
 
 #define BITS_PER_LONG 32
 
 #endif /* __KERNEL__ */
 
-#endif /* __ASSEMBLY__ */
-
 #endif /* _H8300_TYPES_H */
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 27489b6..3b7a7c4 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -23,6 +23,9 @@ config IA64
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_DMA_API_DEBUG
 	select HAVE_GENERIC_HARDIRQS
+	select HAVE_MEMBLOCK
+	select HAVE_MEMBLOCK_NODE_MAP
+	select ARCH_DISCARD_MEMBLOCK
 	select GENERIC_IRQ_PROBE
 	select GENERIC_PENDING_IRQ if SMP
 	select IRQ_PER_CPU
@@ -474,9 +477,6 @@ config NODES_SHIFT
 	  MAX_NUMNODES will be 2^(This value).
 	  If in doubt, use the default.
 
-config ARCH_POPULATES_NODE_MAP
-	def_bool y
-
 # VIRTUAL_MEM_MAP and FLAT_NODE_MEM_MAP are functionally equivalent.
 # VIRTUAL_MEM_MAP has been retained for historical reasons.
 config VIRTUAL_MEM_MAP
diff --git a/arch/ia64/include/asm/cputime.h b/arch/ia64/include/asm/cputime.h
index 6073b18..3deac95 100644
--- a/arch/ia64/include/asm/cputime.h
+++ b/arch/ia64/include/asm/cputime.h
@@ -26,59 +26,53 @@
 #include <linux/jiffies.h>
 #include <asm/processor.h>
 
-typedef u64 cputime_t;
-typedef u64 cputime64_t;
+typedef u64 __nocast cputime_t;
+typedef u64 __nocast cputime64_t;
 
-#define cputime_zero			((cputime_t)0)
 #define cputime_one_jiffy		jiffies_to_cputime(1)
-#define cputime_max			((~((cputime_t)0) >> 1) - 1)
-#define cputime_add(__a, __b)		((__a) +  (__b))
-#define cputime_sub(__a, __b)		((__a) -  (__b))
-#define cputime_div(__a, __n)		((__a) /  (__n))
-#define cputime_halve(__a)		((__a) >> 1)
-#define cputime_eq(__a, __b)		((__a) == (__b))
-#define cputime_gt(__a, __b)		((__a) >  (__b))
-#define cputime_ge(__a, __b)		((__a) >= (__b))
-#define cputime_lt(__a, __b)		((__a) <  (__b))
-#define cputime_le(__a, __b)		((__a) <= (__b))
-
-#define cputime64_zero			((cputime64_t)0)
-#define cputime64_add(__a, __b)		((__a) + (__b))
-#define cputime64_sub(__a, __b)		((__a) - (__b))
-#define cputime_to_cputime64(__ct)	(__ct)
 
 /*
  * Convert cputime <-> jiffies (HZ)
  */
-#define cputime_to_jiffies(__ct)	((__ct) / (NSEC_PER_SEC / HZ))
-#define jiffies_to_cputime(__jif)	((__jif) * (NSEC_PER_SEC / HZ))
-#define cputime64_to_jiffies64(__ct)	((__ct) / (NSEC_PER_SEC / HZ))
-#define jiffies64_to_cputime64(__jif)	((__jif) * (NSEC_PER_SEC / HZ))
+#define cputime_to_jiffies(__ct)	\
+	((__force u64)(__ct) / (NSEC_PER_SEC / HZ))
+#define jiffies_to_cputime(__jif)	\
+	(__force cputime_t)((__jif) * (NSEC_PER_SEC / HZ))
+#define cputime64_to_jiffies64(__ct)	\
+	((__force u64)(__ct) / (NSEC_PER_SEC / HZ))
+#define jiffies64_to_cputime64(__jif)	\
+	(__force cputime64_t)((__jif) * (NSEC_PER_SEC / HZ))
 
 /*
  * Convert cputime <-> microseconds
  */
-#define cputime_to_usecs(__ct)		((__ct) / NSEC_PER_USEC)
-#define usecs_to_cputime(__usecs)	((__usecs) * NSEC_PER_USEC)
+#define cputime_to_usecs(__ct)		\
+	((__force u64)(__ct) / NSEC_PER_USEC)
+#define usecs_to_cputime(__usecs)	\
+	(__force cputime_t)((__usecs) * NSEC_PER_USEC)
+#define usecs_to_cputime64(__usecs)	\
+	(__force cputime64_t)((__usecs) * NSEC_PER_USEC)
 
 /*
  * Convert cputime <-> seconds
  */
-#define cputime_to_secs(__ct)		((__ct) / NSEC_PER_SEC)
-#define secs_to_cputime(__secs)		((__secs) * NSEC_PER_SEC)
+#define cputime_to_secs(__ct)		\
+	((__force u64)(__ct) / NSEC_PER_SEC)
+#define secs_to_cputime(__secs)		\
+	(__force cputime_t)((__secs) * NSEC_PER_SEC)
 
 /*
  * Convert cputime <-> timespec (nsec)
  */
 static inline cputime_t timespec_to_cputime(const struct timespec *val)
 {
-	cputime_t ret = val->tv_sec * NSEC_PER_SEC;
-	return (ret + val->tv_nsec);
+	u64 ret = val->tv_sec * NSEC_PER_SEC + val->tv_nsec;
+	return (__force cputime_t) ret;
 }
 static inline void cputime_to_timespec(const cputime_t ct, struct timespec *val)
 {
-	val->tv_sec  = ct / NSEC_PER_SEC;
-	val->tv_nsec = ct % NSEC_PER_SEC;
+	val->tv_sec  = (__force u64) ct / NSEC_PER_SEC;
+	val->tv_nsec = (__force u64) ct % NSEC_PER_SEC;
 }
 
 /*
@@ -86,25 +80,28 @@ static inline void cputime_to_timespec(const cputime_t ct, struct timespec *val)
  */
 static inline cputime_t timeval_to_cputime(struct timeval *val)
 {
-	cputime_t ret = val->tv_sec * NSEC_PER_SEC;
-	return (ret + val->tv_usec * NSEC_PER_USEC);
+	u64 ret = val->tv_sec * NSEC_PER_SEC + val->tv_usec * NSEC_PER_USEC;
+	return (__force cputime_t) ret;
 }
 static inline void cputime_to_timeval(const cputime_t ct, struct timeval *val)
 {
-	val->tv_sec = ct / NSEC_PER_SEC;
-	val->tv_usec = (ct % NSEC_PER_SEC) / NSEC_PER_USEC;
+	val->tv_sec = (__force u64) ct / NSEC_PER_SEC;
+	val->tv_usec = ((__force u64) ct % NSEC_PER_SEC) / NSEC_PER_USEC;
 }
 
 /*
  * Convert cputime <-> clock (USER_HZ)
  */
-#define cputime_to_clock_t(__ct)	((__ct) / (NSEC_PER_SEC / USER_HZ))
-#define clock_t_to_cputime(__x)		((__x) * (NSEC_PER_SEC / USER_HZ))
+#define cputime_to_clock_t(__ct)	\
+	((__force u64)(__ct) / (NSEC_PER_SEC / USER_HZ))
+#define clock_t_to_cputime(__x)		\
+	(__force cputime_t)((__x) * (NSEC_PER_SEC / USER_HZ))
 
 /*
  * Convert cputime64 to clock.
  */
-#define cputime64_to_clock_t(__ct)      cputime_to_clock_t((cputime_t)__ct)
+#define cputime64_to_clock_t(__ct)	\
+	cputime_to_clock_t((__force cputime_t)__ct)
 
 #endif /* CONFIG_VIRT_CPU_ACCOUNTING */
 #endif /* __IA64_CPUTIME_H */
diff --git a/arch/ia64/include/asm/ipcbuf.h b/arch/ia64/include/asm/ipcbuf.h
index 079899a..84c7e51 100644
--- a/arch/ia64/include/asm/ipcbuf.h
+++ b/arch/ia64/include/asm/ipcbuf.h
@@ -1,28 +1 @@
-#ifndef _ASM_IA64_IPCBUF_H
-#define _ASM_IA64_IPCBUF_H
-
-/*
- * The ipc64_perm structure for IA-64 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit seq
- * - 2 miscellaneous 64-bit values
- */
-
-struct ipc64_perm
-{
-	__kernel_key_t	key;
-	__kernel_uid_t	uid;
-	__kernel_gid_t	gid;
-	__kernel_uid_t	cuid;
-	__kernel_gid_t	cgid;
-	__kernel_mode_t	mode;
-	unsigned short	seq;
-	unsigned short	__pad1;
-	unsigned long	__unused1;
-	unsigned long	__unused2;
-};
-
-#endif /* _ASM_IA64_IPCBUF_H */
+#include <asm-generic/ipcbuf.h>
diff --git a/arch/ia64/include/asm/socket.h b/arch/ia64/include/asm/socket.h
index 51427ea..4b03664 100644
--- a/arch/ia64/include/asm/socket.h
+++ b/arch/ia64/include/asm/socket.h
@@ -71,4 +71,7 @@
 
 #define SO_RXQ_OVFL             40
 
+#define SO_WIFI_STATUS		41
+#define SCM_WIFI_STATUS		SO_WIFI_STATUS
+
 #endif /* _ASM_IA64_SOCKET_H */
diff --git a/arch/ia64/include/asm/thread_info.h b/arch/ia64/include/asm/thread_info.h
index ff0cc84..e054bcc 100644
--- a/arch/ia64/include/asm/thread_info.h
+++ b/arch/ia64/include/asm/thread_info.h
@@ -113,7 +113,6 @@ struct thread_info {
 #define TIF_MEMDIE		17	/* is terminating due to OOM killer */
 #define TIF_MCA_INIT		18	/* this task is processing MCA or INIT */
 #define TIF_DB_DISABLED		19	/* debug trap disabled for fsyscall */
-#define TIF_FREEZE		20	/* is freezing for suspend */
 #define TIF_RESTORE_RSE		21	/* user RBS is newer than kernel RBS */
 
 #define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
@@ -126,7 +125,6 @@ struct thread_info {
 #define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
 #define _TIF_MCA_INIT		(1 << TIF_MCA_INIT)
 #define _TIF_DB_DISABLED	(1 << TIF_DB_DISABLED)
-#define _TIF_FREEZE		(1 << TIF_FREEZE)
 #define _TIF_RESTORE_RSE	(1 << TIF_RESTORE_RSE)
 
 /* "work to do on user-return" bits */
diff --git a/arch/ia64/include/asm/types.h b/arch/ia64/include/asm/types.h
index 82b3939..3f5b122 100644
--- a/arch/ia64/include/asm/types.h
+++ b/arch/ia64/include/asm/types.h
@@ -28,8 +28,6 @@
 # define __IA64_UL(x)		((unsigned long)(x))
 # define __IA64_UL_CONST(x)	x##UL
 
-typedef unsigned int umode_t;
-
 /*
  * These aren't exported outside the kernel to avoid name space clashes
  */
diff --git a/arch/ia64/kernel/err_inject.c b/arch/ia64/kernel/err_inject.c
index c539c68..2d67317 100644
--- a/arch/ia64/kernel/err_inject.c
+++ b/arch/ia64/kernel/err_inject.c
@@ -24,7 +24,7 @@
  * Copyright (C) 2006, Intel Corp.  All rights reserved.
  *
  */
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/cpu.h>
@@ -35,10 +35,10 @@
 #define ERR_DATA_BUFFER_SIZE 3 		// Three 8-byte;
 
 #define define_one_ro(name) 						\
-static SYSDEV_ATTR(name, 0444, show_##name, NULL)
+static DEVICE_ATTR(name, 0444, show_##name, NULL)
 
 #define define_one_rw(name) 						\
-static SYSDEV_ATTR(name, 0644, show_##name, store_##name)
+static DEVICE_ATTR(name, 0644, show_##name, store_##name)
 
 static u64 call_start[NR_CPUS];
 static u64 phys_addr[NR_CPUS];
@@ -55,7 +55,7 @@ static u64 resources[NR_CPUS];
 
 #define show(name) 							\
 static ssize_t 								\
-show_##name(struct sys_device *dev, struct sysdev_attribute *attr,	\
+show_##name(struct device *dev, struct device_attribute *attr,	\
 		char *buf)						\
 {									\
 	u32 cpu=dev->id;						\
@@ -64,7 +64,7 @@ show_##name(struct sys_device *dev, struct sysdev_attribute *attr,	\
 
 #define store(name)							\
 static ssize_t 								\
-store_##name(struct sys_device *dev, struct sysdev_attribute *attr,	\
+store_##name(struct device *dev, struct device_attribute *attr,	\
 					const char *buf, size_t size)	\
 {									\
 	unsigned int cpu=dev->id;					\
@@ -78,7 +78,7 @@ show(call_start)
  * processor. The cpu number in driver is only used for storing data.
  */
 static ssize_t
-store_call_start(struct sys_device *dev, struct sysdev_attribute *attr,
+store_call_start(struct device *dev, struct device_attribute *attr,
 		const char *buf, size_t size)
 {
 	unsigned int cpu=dev->id;
@@ -127,7 +127,7 @@ show(err_type_info)
 store(err_type_info)
 
 static ssize_t
-show_virtual_to_phys(struct sys_device *dev, struct sysdev_attribute *attr,
+show_virtual_to_phys(struct device *dev, struct device_attribute *attr,
 			char *buf)
 {
 	unsigned int cpu=dev->id;
@@ -135,7 +135,7 @@ show_virtual_to_phys(struct sys_device *dev, struct sysdev_attribute *attr,
 }
 
 static ssize_t
-store_virtual_to_phys(struct sys_device *dev, struct sysdev_attribute *attr,
+store_virtual_to_phys(struct device *dev, struct device_attribute *attr,
 			const char *buf, size_t size)
 {
 	unsigned int cpu=dev->id;
@@ -159,8 +159,8 @@ show(err_struct_info)
 store(err_struct_info)
 
 static ssize_t
-show_err_data_buffer(struct sys_device *dev,
-			struct sysdev_attribute *attr, char *buf)
+show_err_data_buffer(struct device *dev,
+			struct device_attribute *attr, char *buf)
 {
 	unsigned int cpu=dev->id;
 
@@ -171,8 +171,8 @@ show_err_data_buffer(struct sys_device *dev,
 }
 
 static ssize_t
-store_err_data_buffer(struct sys_device *dev,
-			struct sysdev_attribute *attr,
+store_err_data_buffer(struct device *dev,
+			struct device_attribute *attr,
 			const char *buf, size_t size)
 {
 	unsigned int cpu=dev->id;
@@ -209,14 +209,14 @@ define_one_ro(capabilities);
 define_one_ro(resources);
 
 static struct attribute *default_attrs[] = {
-	&attr_call_start.attr,
-	&attr_virtual_to_phys.attr,
-	&attr_err_type_info.attr,
-	&attr_err_struct_info.attr,
-	&attr_err_data_buffer.attr,
-	&attr_status.attr,
-	&attr_capabilities.attr,
-	&attr_resources.attr,
+	&dev_attr_call_start.attr,
+	&dev_attr_virtual_to_phys.attr,
+	&dev_attr_err_type_info.attr,
+	&dev_attr_err_struct_info.attr,
+	&dev_attr_err_data_buffer.attr,
+	&dev_attr_status.attr,
+	&dev_attr_capabilities.attr,
+	&dev_attr_resources.attr,
 	NULL
 };
 
@@ -225,12 +225,12 @@ static struct attribute_group err_inject_attr_group = {
 	.name = "err_inject"
 };
 /* Add/Remove err_inject interface for CPU device */
-static int __cpuinit err_inject_add_dev(struct sys_device * sys_dev)
+static int __cpuinit err_inject_add_dev(struct device * sys_dev)
 {
 	return sysfs_create_group(&sys_dev->kobj, &err_inject_attr_group);
 }
 
-static int __cpuinit err_inject_remove_dev(struct sys_device * sys_dev)
+static int __cpuinit err_inject_remove_dev(struct device * sys_dev)
 {
 	sysfs_remove_group(&sys_dev->kobj, &err_inject_attr_group);
 	return 0;
@@ -239,9 +239,9 @@ static int __cpuinit err_inject_cpu_callback(struct notifier_block *nfb,
 		unsigned long action, void *hcpu)
 {
 	unsigned int cpu = (unsigned long)hcpu;
-	struct sys_device *sys_dev;
+	struct device *sys_dev;
 
-	sys_dev = get_cpu_sysdev(cpu);
+	sys_dev = get_cpu_device(cpu);
 	switch (action) {
 	case CPU_ONLINE:
 	case CPU_ONLINE_FROZEN:
@@ -283,13 +283,13 @@ static void __exit
 err_inject_exit(void)
 {
 	int i;
-	struct sys_device *sys_dev;
+	struct device *sys_dev;
 
 #ifdef ERR_INJ_DEBUG
 	printk(KERN_INFO "Exit error injection driver.\n");
 #endif
 	for_each_online_cpu(i) {
-		sys_dev = get_cpu_sysdev(i);
+		sys_dev = get_cpu_device(i);
 		sysfs_remove_group(&sys_dev->kobj, &err_inject_attr_group);
 	}
 	unregister_hotcpu_notifier(&err_inject_cpu_notifier);
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index 89accc6..b2c65e0 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -2228,7 +2228,7 @@ pfm_alloc_file(pfm_context_t *ctx)
 	/*
 	 * allocate a new dcache entry
 	 */
-	path.dentry = d_alloc(pfmfs_mnt->mnt_sb->s_root, &this);
+	path.dentry = d_alloc(pfmfs_mnt->mnt_root, &this);
 	if (!path.dentry) {
 		iput(inode);
 		return ERR_PTR(-ENOMEM);
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index 5e2c724..cd57d73 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -220,6 +220,23 @@ sort_regions (struct rsvd_region *rsvd_region, int max)
 	}
 }
 
+/* merge overlaps */
+static int __init
+merge_regions (struct rsvd_region *rsvd_region, int max)
+{
+	int i;
+	for (i = 1; i < max; ++i) {
+		if (rsvd_region[i].start >= rsvd_region[i-1].end)
+			continue;
+		if (rsvd_region[i].end > rsvd_region[i-1].end)
+			rsvd_region[i-1].end = rsvd_region[i].end;
+		--max;
+		memmove(&rsvd_region[i], &rsvd_region[i+1],
+			(max - i) * sizeof(struct rsvd_region));
+	}
+	return max;
+}
+
 /*
  * Request address space for all standard resources
  */
@@ -270,6 +287,7 @@ static void __init setup_crashkernel(unsigned long total, int *n)
 	if (ret == 0 && size > 0) {
 		if (!base) {
 			sort_regions(rsvd_region, *n);
+			*n = merge_regions(rsvd_region, *n);
 			base = kdump_find_rsvd_region(size,
 					rsvd_region, *n);
 		}
@@ -373,6 +391,7 @@ reserve_memory (void)
 	BUG_ON(IA64_MAX_RSVD_REGIONS + 1 < n);
 
 	sort_regions(rsvd_region, num_rsvd_regions);
+	num_rsvd_regions = merge_regions(rsvd_region, num_rsvd_regions);
 }
 
 
diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c
index 9be1f11..9deb21d 100644
--- a/arch/ia64/kernel/topology.c
+++ b/arch/ia64/kernel/topology.c
@@ -350,7 +350,7 @@ static int __cpuinit cpu_cache_sysfs_init(unsigned int cpu)
 }
 
 /* Add cache interface for CPU device */
-static int __cpuinit cache_add_dev(struct sys_device * sys_dev)
+static int __cpuinit cache_add_dev(struct device * sys_dev)
 {
 	unsigned int cpu = sys_dev->id;
 	unsigned long i, j;
@@ -400,7 +400,7 @@ static int __cpuinit cache_add_dev(struct sys_device * sys_dev)
 }
 
 /* Remove cache interface for CPU device */
-static int __cpuinit cache_remove_dev(struct sys_device * sys_dev)
+static int __cpuinit cache_remove_dev(struct device * sys_dev)
 {
 	unsigned int cpu = sys_dev->id;
 	unsigned long i;
@@ -428,9 +428,9 @@ static int __cpuinit cache_cpu_callback(struct notifier_block *nfb,
 		unsigned long action, void *hcpu)
 {
 	unsigned int cpu = (unsigned long)hcpu;
-	struct sys_device *sys_dev;
+	struct device *sys_dev;
 
-	sys_dev = get_cpu_sysdev(cpu);
+	sys_dev = get_cpu_device(cpu);
 	switch (action) {
 	case CPU_ONLINE:
 	case CPU_ONLINE_FROZEN:
@@ -454,7 +454,7 @@ static int __init cache_sysfs_init(void)
 	int i;
 
 	for_each_online_cpu(i) {
-		struct sys_device *sys_dev = get_cpu_sysdev((unsigned int)i);
+		struct device *sys_dev = get_cpu_device((unsigned int)i);
 		cache_add_dev(sys_dev);
 	}
 
diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c
index f114a3b..1516d1d 100644
--- a/arch/ia64/mm/contig.c
+++ b/arch/ia64/mm/contig.c
@@ -16,6 +16,7 @@
  */
 #include <linux/bootmem.h>
 #include <linux/efi.h>
+#include <linux/memblock.h>
 #include <linux/mm.h>
 #include <linux/nmi.h>
 #include <linux/swap.h>
@@ -348,7 +349,7 @@ paging_init (void)
 		printk("Virtual mem_map starts at 0x%p\n", mem_map);
 	}
 #else /* !CONFIG_VIRTUAL_MEM_MAP */
-	add_active_range(0, 0, max_low_pfn);
+	memblock_add_node(0, PFN_PHYS(max_low_pfn), 0);
 	free_area_init_nodes(max_zone_pfns);
 #endif /* !CONFIG_VIRTUAL_MEM_MAP */
 	zero_page_memmap_ptr = virt_to_page(ia64_imva(empty_zero_page));
diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c
index 00cb0e2..13df239d 100644
--- a/arch/ia64/mm/init.c
+++ b/arch/ia64/mm/init.c
@@ -10,6 +10,7 @@
 #include <linux/bootmem.h>
 #include <linux/efi.h>
 #include <linux/elf.h>
+#include <linux/memblock.h>
 #include <linux/mm.h>
 #include <linux/mmzone.h>
 #include <linux/module.h>
@@ -557,8 +558,7 @@ int __init register_active_ranges(u64 start, u64 len, int nid)
 #endif
 
 	if (start < end)
-		add_active_range(nid, __pa(start) >> PAGE_SHIFT,
-			__pa(end) >> PAGE_SHIFT);
+		memblock_add_node(__pa(start), end - start, nid);
 	return 0;
 }
 
diff --git a/arch/ia64/sn/kernel/irq.c b/arch/ia64/sn/kernel/irq.c
index 485c42d9..dfac09a 100644
--- a/arch/ia64/sn/kernel/irq.c
+++ b/arch/ia64/sn/kernel/irq.c
@@ -150,12 +150,11 @@ struct sn_irq_info *sn_retarget_vector(struct sn_irq_info *sn_irq_info,
 	 * PROM does not support SAL_INTR_REDIRECT, or it failed.
 	 * Revert to old method.
 	 */
-	new_irq_info = kmalloc(sizeof(struct sn_irq_info), GFP_ATOMIC);
+	new_irq_info = kmemdup(sn_irq_info, sizeof(struct sn_irq_info),
+			       GFP_ATOMIC);
 	if (new_irq_info == NULL)
 		return NULL;
 
-	memcpy(new_irq_info, sn_irq_info, sizeof(struct sn_irq_info));
-
 	/* Free the old PROM new_irq_info structure */
 	sn_intr_free(local_nasid, local_widget, new_irq_info);
 	unregister_intr_pda(new_irq_info);
diff --git a/arch/ia64/sn/pci/pcibr/pcibr_provider.c b/arch/ia64/sn/pci/pcibr/pcibr_provider.c
index 5698f29..8886a0b 100644
--- a/arch/ia64/sn/pci/pcibr/pcibr_provider.c
+++ b/arch/ia64/sn/pci/pcibr/pcibr_provider.c
@@ -127,12 +127,11 @@ pcibr_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont
 	 * Allocate kernel bus soft and copy from prom.
 	 */
 
-	soft = kmalloc(sizeof(struct pcibus_info), GFP_KERNEL);
+	soft = kmemdup(prom_bussoft, sizeof(struct pcibus_info), GFP_KERNEL);
 	if (!soft) {
 		return NULL;
 	}
 
-	memcpy(soft, prom_bussoft, sizeof(struct pcibus_info));
 	soft->pbi_buscommon.bs_base = (unsigned long)
 		ioremap(REGION_OFFSET(soft->pbi_buscommon.bs_base),
 			sizeof(struct pic));
diff --git a/arch/ia64/sn/pci/tioca_provider.c b/arch/ia64/sn/pci/tioca_provider.c
index 642451e..e77c477 100644
--- a/arch/ia64/sn/pci/tioca_provider.c
+++ b/arch/ia64/sn/pci/tioca_provider.c
@@ -600,11 +600,11 @@ tioca_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont
 	 * Allocate kernel bus soft and copy from prom.
 	 */
 
-	tioca_common = kzalloc(sizeof(struct tioca_common), GFP_KERNEL);
+	tioca_common = kmemdup(prom_bussoft, sizeof(struct tioca_common),
+			       GFP_KERNEL);
 	if (!tioca_common)
 		return NULL;
 
-	memcpy(tioca_common, prom_bussoft, sizeof(struct tioca_common));
 	tioca_common->ca_common.bs_base = (unsigned long)
 		ioremap(REGION_OFFSET(tioca_common->ca_common.bs_base),
 			sizeof(struct tioca_common));
diff --git a/arch/m32r/include/asm/ipcbuf.h b/arch/m32r/include/asm/ipcbuf.h
index 8d2d7c8..84c7e51 100644
--- a/arch/m32r/include/asm/ipcbuf.h
+++ b/arch/m32r/include/asm/ipcbuf.h
@@ -1,29 +1 @@
-#ifndef _ASM_M32R_IPCBUF_H
-#define _ASM_M32R_IPCBUF_H
-
-/*
- * The ipc64_perm structure for m32r architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit mode_t and seq
- * - 2 miscellaneous 32-bit values
- */
-
-struct ipc64_perm
-{
-	__kernel_key_t		key;
-	__kernel_uid32_t	uid;
-	__kernel_gid32_t	gid;
-	__kernel_uid32_t	cuid;
-	__kernel_gid32_t	cgid;
-	__kernel_mode_t		mode;
-	unsigned short		__pad1;
-	unsigned short		seq;
-	unsigned short		__pad2;
-	unsigned long		__unused1;
-	unsigned long		__unused2;
-};
-
-#endif /* _ASM_M32R_IPCBUF_H */
+#include <asm-generic/ipcbuf.h>
diff --git a/arch/m32r/include/asm/socket.h b/arch/m32r/include/asm/socket.h
index 469787c3..e8b8c5b 100644
--- a/arch/m32r/include/asm/socket.h
+++ b/arch/m32r/include/asm/socket.h
@@ -62,4 +62,7 @@
 
 #define SO_RXQ_OVFL             40
 
+#define SO_WIFI_STATUS		41
+#define SCM_WIFI_STATUS		SO_WIFI_STATUS
+
 #endif /* _ASM_M32R_SOCKET_H */
diff --git a/arch/m32r/include/asm/thread_info.h b/arch/m32r/include/asm/thread_info.h
index 0227dba..bf8fa3c 100644
--- a/arch/m32r/include/asm/thread_info.h
+++ b/arch/m32r/include/asm/thread_info.h
@@ -138,7 +138,6 @@ static inline unsigned int get_thread_fault_code(void)
 #define TIF_USEDFPU		16	/* FPU was used by this task this quantum (SMP) */
 #define TIF_POLLING_NRFLAG	17	/* true if poll_idle() is polling TIF_NEED_RESCHED */
 #define TIF_MEMDIE		18	/* is terminating due to OOM killer */
-#define TIF_FREEZE		19	/* is freezing for suspend */
 
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
 #define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
@@ -149,7 +148,6 @@ static inline unsigned int get_thread_fault_code(void)
 #define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
 #define _TIF_USEDFPU		(1<<TIF_USEDFPU)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
-#define _TIF_FREEZE		(1<<TIF_FREEZE)
 
 #define _TIF_WORK_MASK		0x0000FFFE	/* work to do on interrupt/exception return */
 #define _TIF_ALLWORK_MASK	0x0000FFFF	/* work to do on any return to u-space */
diff --git a/arch/m32r/include/asm/types.h b/arch/m32r/include/asm/types.h
index bd00355..bb2eead 100644
--- a/arch/m32r/include/asm/types.h
+++ b/arch/m32r/include/asm/types.h
@@ -3,12 +3,6 @@
 
 #include <asm-generic/int-ll64.h>
 
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-#endif /* __ASSEMBLY__ */
-
 /*
  * These aren't exported outside the kernel to avoid name space clashes
  */
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 361d540..81fdaa7 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -3,7 +3,6 @@ config M68K
 	default y
 	select HAVE_IDE
 	select HAVE_AOUT if MMU
-	select GENERIC_ATOMIC64 if MMU
 	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_SHOW
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS
@@ -41,12 +40,15 @@ config GENERIC_CALIBRATE_DELAY
 config GENERIC_IOMAP
 	def_bool MMU
 
+config GENERIC_CSUM
+	bool
+
 config TIME_LOW_RES
 	bool
 	default y
 
 config ARCH_USES_GETTIMEOFFSET
-	def_bool MMU
+	def_bool MMU && !COLDFIRE
 
 config NO_IOPORT
 	def_bool y
@@ -61,6 +63,12 @@ config ZONE_DMA
 config CPU_HAS_NO_BITFIELDS
 	bool
 
+config CPU_HAS_NO_MULDIV64
+	bool
+
+config CPU_HAS_ADDRESS_SPACES
+	bool
+
 config HZ
 	int
 	default 1000 if CLEOPATRA
@@ -80,9 +88,12 @@ config MMU
 config MMU_MOTOROLA
 	bool
 
+config MMU_COLDFIRE
+	bool
+
 config MMU_SUN3
 	bool
-	depends on MMU && !MMU_MOTOROLA
+	depends on MMU && !MMU_MOTOROLA && !MMU_COLDFIRE
 
 menu "Platform setup"
 
diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu
index e632b2d..8a9c767 100644
--- a/arch/m68k/Kconfig.cpu
+++ b/arch/m68k/Kconfig.cpu
@@ -1,8 +1,42 @@
 comment "Processor Type"
 
+choice
+	prompt "CPU family support"
+	default M68KCLASSIC if MMU
+	default COLDFIRE if !MMU
+	help
+	  The Freescale (was Motorola) M68K family of processors implements
+	  the full 68000 processor instruction set.
+	  The Freescale ColdFire family of processors is a modern derivitive
+	  of the 68000 processor family. They are mainly targeted at embedded
+	  applications, and are all System-On-Chip (SOC) devices, as opposed
+	  to stand alone CPUs. They implement a subset of the original 68000
+	  processor instruction set.
+	  If you anticipate running this kernel on a computer with a classic
+	  MC68xxx processor, select M68KCLASSIC.
+	  If you anticipate running this kernel on a computer with a ColdFire
+	  processor, select COLDFIRE.
+
+config M68KCLASSIC
+	bool "Classic M68K CPU family support"
+
+config COLDFIRE
+	bool "Coldfire CPU family support"
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	select CPU_HAS_NO_BITFIELDS
+	select CPU_HAS_NO_MULDIV64
+	select GENERIC_CSUM
+
+endchoice
+
+if M68KCLASSIC
+
 config M68000
 	bool
 	select CPU_HAS_NO_BITFIELDS
+	select CPU_HAS_NO_MULDIV64
+	select GENERIC_CSUM
 	help
 	  The Freescale (was Motorola) 68000 CPU is the first generation of
 	  the well known M68K family of processors. The CPU core as well as
@@ -18,21 +52,11 @@ config MCPU32
 	  based on the 68020 processor. For the most part it is used in
 	  System-On-Chip parts, and does not contain a paging MMU.
 
-config COLDFIRE
-	bool
-	select GENERIC_GPIO
-	select ARCH_REQUIRE_GPIOLIB
-	select CPU_HAS_NO_BITFIELDS
-	help
-	  The Freescale ColdFire family of processors is a modern derivitive
-	  of the 68000 processor family. They are mainly targeted at embedded
-	  applications, and are all System-On-Chip (SOC) devices, as opposed
-	  to stand alone CPUs. They implement a subset of the original 68000
-	  processor instruction set.
-
 config M68020
 	bool "68020 support"
 	depends on MMU
+	select GENERIC_ATOMIC64
+	select CPU_HAS_ADDRESS_SPACES
 	help
 	  If you anticipate running this kernel on a computer with a MC68020
 	  processor, say Y. Otherwise, say N. Note that the 68020 requires a
@@ -42,6 +66,8 @@ config M68020
 config M68030
 	bool "68030 support"
 	depends on MMU && !MMU_SUN3
+	select GENERIC_ATOMIC64
+	select CPU_HAS_ADDRESS_SPACES
 	help
 	  If you anticipate running this kernel on a computer with a MC68030
 	  processor, say Y. Otherwise, say N. Note that a MC68EC030 will not
@@ -50,6 +76,8 @@ config M68030
 config M68040
 	bool "68040 support"
 	depends on MMU && !MMU_SUN3
+	select GENERIC_ATOMIC64
+	select CPU_HAS_ADDRESS_SPACES
 	help
 	  If you anticipate running this kernel on a computer with a MC68LC040
 	  or MC68040 processor, say Y. Otherwise, say N. Note that an
@@ -59,6 +87,8 @@ config M68040
 config M68060
 	bool "68060 support"
 	depends on MMU && !MMU_SUN3
+	select GENERIC_ATOMIC64
+	select CPU_HAS_ADDRESS_SPACES
 	help
 	  If you anticipate running this kernel on a computer with a MC68060
 	  processor, say Y. Otherwise, say N.
@@ -91,10 +121,13 @@ config M68360
 	help
 	  Motorola 68360 processor support.
 
+endif # M68KCLASSIC
+
+if COLDFIRE
+
 config M5206
 	bool "MCF5206"
 	depends on !MMU
-	select COLDFIRE
 	select COLDFIRE_SW_A7
 	select HAVE_MBAR
 	help
@@ -103,7 +136,6 @@ config M5206
 config M5206e
 	bool "MCF5206e"
 	depends on !MMU
-	select COLDFIRE
 	select COLDFIRE_SW_A7
 	select HAVE_MBAR
 	help
@@ -112,7 +144,6 @@ config M5206e
 config M520x
 	bool "MCF520x"
 	depends on !MMU
-	select COLDFIRE
 	select GENERIC_CLOCKEVENTS
 	select HAVE_CACHE_SPLIT
 	help
@@ -121,7 +152,6 @@ config M520x
 config M523x
 	bool "MCF523x"
 	depends on !MMU
-	select COLDFIRE
 	select GENERIC_CLOCKEVENTS
 	select HAVE_CACHE_SPLIT
 	select HAVE_IPSBAR
@@ -131,7 +161,6 @@ config M523x
 config M5249
 	bool "MCF5249"
 	depends on !MMU
-	select COLDFIRE
 	select COLDFIRE_SW_A7
 	select HAVE_MBAR
 	help
@@ -143,7 +172,6 @@ config M527x
 config M5271
 	bool "MCF5271"
 	depends on !MMU
-	select COLDFIRE
 	select M527x
 	select HAVE_CACHE_SPLIT
 	select HAVE_IPSBAR
@@ -154,7 +182,6 @@ config M5271
 config M5272
 	bool "MCF5272"
 	depends on !MMU
-	select COLDFIRE
 	select COLDFIRE_SW_A7
 	select HAVE_MBAR
 	help
@@ -163,7 +190,6 @@ config M5272
 config M5275
 	bool "MCF5275"
 	depends on !MMU
-	select COLDFIRE
 	select M527x
 	select HAVE_CACHE_SPLIT
 	select HAVE_IPSBAR
@@ -174,7 +200,6 @@ config M5275
 config M528x
 	bool "MCF528x"
 	depends on !MMU
-	select COLDFIRE
 	select GENERIC_CLOCKEVENTS
 	select HAVE_CACHE_SPLIT
 	select HAVE_IPSBAR
@@ -184,7 +209,6 @@ config M528x
 config M5307
 	bool "MCF5307"
 	depends on !MMU
-	select COLDFIRE
 	select COLDFIRE_SW_A7
 	select HAVE_CACHE_CB
 	select HAVE_MBAR
@@ -194,7 +218,6 @@ config M5307
 config M532x
 	bool "MCF532x"
 	depends on !MMU
-	select COLDFIRE
 	select HAVE_CACHE_CB
 	help
 	  Freescale (Motorola) ColdFire 532x processor support.
@@ -202,7 +225,6 @@ config M532x
 config M5407
 	bool "MCF5407"
 	depends on !MMU
-	select COLDFIRE
 	select COLDFIRE_SW_A7
 	select HAVE_CACHE_CB
 	select HAVE_MBAR
@@ -214,9 +236,8 @@ config M54xx
 
 config M547x
 	bool "MCF547x"
-	depends on !MMU
-	select COLDFIRE
 	select M54xx
+	select MMU_COLDFIRE if MMU
 	select HAVE_CACHE_CB
 	select HAVE_MBAR
 	help
@@ -224,14 +245,15 @@ config M547x
 
 config M548x
 	bool "MCF548x"
-	depends on !MMU
-	select COLDFIRE
+	select MMU_COLDFIRE if MMU
 	select M54xx
 	select HAVE_CACHE_CB
 	select HAVE_MBAR
 	help
 	  Freescale ColdFire 5480/5481/5482/5483/5484/5485 processor support.
 
+endif # COLDFIRE
+
 
 comment "Processor Specific Options"
 
diff --git a/arch/m68k/Kconfig.debug b/arch/m68k/Kconfig.debug
index 2bdb1b0..87233ac 100644
--- a/arch/m68k/Kconfig.debug
+++ b/arch/m68k/Kconfig.debug
@@ -2,6 +2,25 @@ menu "Kernel hacking"
 
 source "lib/Kconfig.debug"
 
+config BOOTPARAM
+	bool 'Compiled-in Kernel Boot Parameter'
+
+config BOOTPARAM_STRING
+	string 'Kernel Boot Parameter'
+	default 'console=ttyS0,19200'
+	depends on BOOTPARAM
+
+config EARLY_PRINTK
+	bool "Early printk" if EMBEDDED
+	depends on MVME16x || MAC
+	default y
+	help
+          Write kernel log output directly to a serial port.
+
+          This is useful for kernel debugging when your machine crashes very
+          early before the console code is initialized.
+          You should normally say N here, unless you want to debug such a crash.
+
 if !MMU
 
 config FULLDEBUG
@@ -15,14 +34,6 @@ config HIGHPROFILE
 	help
 	  Use a fast secondary clock to produce profiling information.
 
-config BOOTPARAM
-	bool 'Compiled-in Kernel Boot Parameter'
-
-config BOOTPARAM_STRING
-	string 'Kernel Boot Parameter'
-	default 'console=ttyS0,19200'
-	depends on BOOTPARAM
-
 config NO_KERNEL_MSG
 	bool "Suppress Kernel BUG Messages"
 	help
diff --git a/arch/m68k/Kconfig.devices b/arch/m68k/Kconfig.devices
index 6033f5d..04a3d9b 100644
--- a/arch/m68k/Kconfig.devices
+++ b/arch/m68k/Kconfig.devices
@@ -8,8 +8,8 @@ config ARCH_MAY_HAVE_PC_FDC
 menu "Platform devices"
 
 config HEARTBEAT
-	bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || MAC ||Q40
-	default y if !AMIGA && !APOLLO && !ATARI && !MAC && !Q40 && HP300
+	bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || Q40
+	default y if !AMIGA && !APOLLO && !ATARI && !Q40 && HP300
 	help
 	  Use the power-on LED on your machine as a load meter.  The exact
 	  behavior is platform-dependent, but normally the flash frequency is
@@ -59,27 +59,6 @@ endmenu
 
 menu "Character devices"
 
-config ATARI_MFPSER
-	tristate "Atari MFP serial support"
-	depends on ATARI
-	---help---
-	  If you like to use the MFP serial ports ("Modem1", "Serial1") under
-	  Linux, say Y. The driver equally supports all kinds of MFP serial
-	  ports and automatically detects whether Serial1 is available.
-
-	  To compile this driver as a module, choose M here.
-
-	  Note for Falcon users: You also have an MFP port, it's just not
-	  wired to the outside... But you could use the port under Linux.
-
-config ATARI_MIDI
-	tristate "Atari MIDI serial support"
-	depends on ATARI
-	help
-	  If you want to use your Atari's MIDI port in Linux, say Y.
-
-	  To compile this driver as a module, choose M here.
-
 config ATARI_DSP56K
 	tristate "Atari DSP56k support (EXPERIMENTAL)"
 	depends on ATARI && EXPERIMENTAL
@@ -99,15 +78,6 @@ config AMIGA_BUILTIN_SERIAL
 
 	  To compile this driver as a module, choose M here.
 
-config MULTIFACE_III_TTY
-	tristate "Multiface Card III serial support"
-	depends on AMIGA
-	help
-	  If you want to use a Multiface III card's serial port in Linux,
-	  answer Y.
-
-	  To compile this driver as a module, choose M here.
-
 config HPDCA
 	tristate "HP DCA serial support"
 	depends on DIO && SERIAL_8250
@@ -122,13 +92,9 @@ config HPAPCI
 	  If you want to use the internal "APCI" serial ports on an HP400
 	  machine, say Y here.
 
-config DN_SERIAL
-	bool "Support for DN serial port (dummy)"
-	depends on APOLLO
-
 config SERIAL_CONSOLE
 	bool "Support for serial port console"
-	depends on (AMIGA || ATARI || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_MIDI=y || AMIGA_BUILTIN_SERIAL=y || MULTIFACE_III_TTY=y || SERIAL=y || SERIAL167 || DN_SERIAL)
+	depends on AMIGA_BUILTIN_SERIAL=y
 	---help---
 	  If you say Y here, it will be possible to use a serial port as the
 	  system console (the system console is the device which receives all
@@ -140,10 +106,10 @@ config SERIAL_CONSOLE
 	  (/dev/tty0) will still be used as the system console by default, but
 	  you can alter that using a kernel command line option such as
 	  "console=ttyS1". (Try "man bootparam" or see the documentation of
-	  your boot loader (lilo or loadlin) about how to pass options to the
-	  kernel at boot time.)
+	  your boot loader about how to pass options to the kernel at boot
+	  time.)
 
-	  If you don't have a VGA card installed and you say Y here, the
+	  If you don't have a graphical console and you say Y here, the
 	  kernel will automatically use the first serial line, /dev/ttyS0, as
 	  system console.
 
diff --git a/arch/m68k/Kconfig.machine b/arch/m68k/Kconfig.machine
index ef4a26a..7cdf6b0 100644
--- a/arch/m68k/Kconfig.machine
+++ b/arch/m68k/Kconfig.machine
@@ -1,5 +1,7 @@
 comment "Machine Types"
 
+if M68KCLASSIC
+
 config AMIGA
 	bool "Amiga support"
 	depends on MMU
@@ -130,6 +132,8 @@ config SUN3
 
 	  If you don't want to compile a kernel exclusively for a Sun 3, say N.
 
+endif # M68KCLASSIC
+
 config PILOT
 	bool
 
diff --git a/arch/m68k/atari/ataints.c b/arch/m68k/atari/ataints.c
index 6d196da..8048e1b 100644
--- a/arch/m68k/atari/ataints.c
+++ b/arch/m68k/atari/ataints.c
@@ -82,8 +82,6 @@ __ALIGN_STR "\n\t"
 
 extern void atari_microwire_cmd(int cmd);
 
-extern int atari_SCC_reset_done;
-
 static unsigned int atari_irq_startup(struct irq_data *data)
 {
 	unsigned int irq = data->irq;
diff --git a/arch/m68k/atari/debug.c b/arch/m68k/atari/debug.c
index 5a48424..a547ba9 100644
--- a/arch/m68k/atari/debug.c
+++ b/arch/m68k/atari/debug.c
@@ -202,7 +202,6 @@ static void __init atari_init_mfp_port(int cflag)
 
 static void __init atari_init_scc_port(int cflag)
 {
-	extern int atari_SCC_reset_done;
 	static int clksrc_table[9] =
 		/* reg 11: 0x50 = BRG, 0x00 = RTxC, 0x28 = TRxC */
 		{ 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x00, 0x00 };
diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig
index dbb49fc..e93fdae 100644
--- a/arch/m68k/configs/amiga_defconfig
+++ b/arch/m68k/configs/amiga_defconfig
@@ -255,7 +255,6 @@ CONFIG_HID=m
 CONFIG_HIDRAW=y
 # CONFIG_USB_SUPPORT is not set
 CONFIG_AMIGA_BUILTIN_SERIAL=y
-CONFIG_MULTIFACE_III_TTY=m
 CONFIG_SERIAL_CONSOLE=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig
index 562b221..66b26c1 100644
--- a/arch/m68k/configs/apollo_defconfig
+++ b/arch/m68k/configs/apollo_defconfig
@@ -223,8 +223,6 @@ CONFIG_LOGO=y
 CONFIG_HID=m
 CONFIG_HIDRAW=y
 # CONFIG_USB_SUPPORT is not set
-CONFIG_DN_SERIAL=y
-CONFIG_SERIAL_CONSOLE=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig
index 82978df..1513325 100644
--- a/arch/m68k/configs/atari_defconfig
+++ b/arch/m68k/configs/atari_defconfig
@@ -235,10 +235,7 @@ CONFIG_DMASOUND_ATARI=m
 CONFIG_HID=m
 CONFIG_HIDRAW=y
 # CONFIG_USB_SUPPORT is not set
-CONFIG_ATARI_MFPSER=y
-CONFIG_ATARI_MIDI=y
 CONFIG_ATARI_DSP56K=m
-CONFIG_SERIAL_CONSOLE=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig
index ad9e857..55d394e 100644
--- a/arch/m68k/configs/multi_defconfig
+++ b/arch/m68k/configs/multi_defconfig
@@ -318,13 +318,8 @@ CONFIG_DMASOUND_Q40=m
 CONFIG_HID=m
 CONFIG_HIDRAW=y
 # CONFIG_USB_SUPPORT is not set
-CONFIG_ATARI_MFPSER=y
-CONFIG_ATARI_MIDI=y
 CONFIG_ATARI_DSP56K=m
 CONFIG_AMIGA_BUILTIN_SERIAL=y
-CONFIG_MULTIFACE_III_TTY=m
-CONFIG_SERIAL167=y
-CONFIG_DN_SERIAL=y
 CONFIG_SERIAL_CONSOLE=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig
index c45aaf3..cdb70d6 100644
--- a/arch/m68k/configs/mvme16x_defconfig
+++ b/arch/m68k/configs/mvme16x_defconfig
@@ -218,8 +218,6 @@ CONFIG_GEN_RTC_X=y
 CONFIG_HID=m
 CONFIG_HIDRAW=y
 # CONFIG_USB_SUPPORT is not set
-CONFIG_SERIAL167=y
-CONFIG_SERIAL_CONSOLE=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
diff --git a/arch/m68k/emu/nfeth.c b/arch/m68k/emu/nfeth.c
index c5748bb..a985a7e 100644
--- a/arch/m68k/emu/nfeth.c
+++ b/arch/m68k/emu/nfeth.c
@@ -39,7 +39,7 @@ enum {
 #define MAX_UNIT	8
 
 /* These identify the driver base version and may not be removed. */
-static const char version[] __devinitdata =
+static const char version[] __devinitconst =
 	KERN_INFO KBUILD_MODNAME ".c:v" DRV_VERSION " " DRV_RELDATE
 	" S.Opichal, M.Jurik, P.Stehlik\n"
 	KERN_INFO " http://aranym.org/\n";
diff --git a/arch/m68k/hp300/config.c b/arch/m68k/hp300/config.c
index 1c05a62..bf16af1 100644
--- a/arch/m68k/hp300/config.c
+++ b/arch/m68k/hp300/config.c
@@ -24,7 +24,8 @@
 
 unsigned long hp300_model;
 unsigned long hp300_uart_scode = -1;
-unsigned char ledstate;
+unsigned char hp300_ledstate;
+EXPORT_SYMBOL(hp300_ledstate);
 
 static char s_hp330[] __initdata = "330";
 static char s_hp340[] __initdata = "340";
diff --git a/arch/m68k/include/asm/anchor.h b/arch/m68k/include/asm/anchor.h
deleted file mode 100644
index 871c0d5..0000000
--- a/arch/m68k/include/asm/anchor.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/****************************************************************************/
-
-/*
- *	anchor.h -- Anchor CO-MEM Lite PCI host bridge part.
- *
- *	(C) Copyright 2000, Moreton Bay (www.moreton.com.au)
- */
-
-/****************************************************************************/
-#ifndef	anchor_h
-#define	anchor_h
-/****************************************************************************/
-
-/*
- *	Define basic addressing info.
- */
-#if defined(CONFIG_M5407C3)
-#define	COMEM_BASE	0xFFFF0000	/* Base of CO-MEM address space */
-#define	COMEM_IRQ	25		/* IRQ of anchor part */
-#else
-#define	COMEM_BASE	0x80000000	/* Base of CO-MEM address space */
-#define	COMEM_IRQ	25		/* IRQ of anchor part */
-#endif
-
-/****************************************************************************/
-
-/*
- *	4-byte registers of CO-MEM, so adjust register addresses for
- *	easy access. Handy macro for word access too.
- */
-#define	LREG(a)		((a) >> 2)
-#define	WREG(a)		((a) >> 1)
-
-
-/*
- *	Define base addresses within CO-MEM Lite register address space.
- */
-#define	COMEM_I2O	0x0000		/* I2O registers */
-#define	COMEM_OPREGS	0x0400		/* Operation registers */
-#define	COMEM_PCIBUS	0x2000		/* Direct access to PCI bus */
-#define	COMEM_SHMEM	0x4000		/* Shared memory region */
-
-#define	COMEM_SHMEMSIZE	0x4000		/* Size of shared memory */
-
-
-/*
- *	Define CO-MEM Registers.
- */
-#define	COMEM_I2OHISR	0x0030		/* I2O host interrupt status */
-#define	COMEM_I2OHIMR	0x0034		/* I2O host interrupt mask */
-#define	COMEM_I2OLISR	0x0038		/* I2O local interrupt status */
-#define	COMEM_I2OLIMR	0x003c		/* I2O local interrupt mask */
-#define	COMEM_IBFPFIFO	0x0040		/* I2O inbound free/post FIFO */
-#define	COMEM_OBPFFIFO	0x0044		/* I2O outbound post/free FIFO */
-#define	COMEM_IBPFFIFO	0x0048		/* I2O inbound post/free FIFO */
-#define	COMEM_OBFPFIFO	0x004c		/* I2O outbound free/post FIFO */
-
-#define	COMEM_DAHBASE	0x0460		/* Direct access base address */
-
-#define	COMEM_NVCMD	0x04a0		/* I2C serial command */
-#define	COMEM_NVREAD	0x04a4		/* I2C serial read */
-#define	COMEM_NVSTAT	0x04a8		/* I2C status */
-
-#define	COMEM_DMALBASE	0x04b0		/* DMA local base address */
-#define	COMEM_DMAHBASE	0x04b4		/* DMA host base address */
-#define	COMEM_DMASIZE	0x04b8		/* DMA size */
-#define	COMEM_DMACTL	0x04bc		/* DMA control */
-
-#define	COMEM_HCTL	0x04e0		/* Host control */
-#define	COMEM_HINT	0x04e4		/* Host interrupt control/status */
-#define	COMEM_HLDATA	0x04e8		/* Host to local data mailbox */
-#define	COMEM_LINT	0x04f4		/* Local interrupt contole status */
-#define	COMEM_LHDATA	0x04f8		/* Local to host data mailbox */
-
-#define	COMEM_LBUSCFG	0x04fc		/* Local bus configuration */
-
-
-/*
- *	Commands and flags for use with Direct Access Register.
- */
-#define	COMEM_DA_IACK	0x00000000	/* Interrupt acknowledge (read) */
-#define	COMEM_DA_SPCL	0x00000010	/* Special cycle (write) */
-#define	COMEM_DA_MEMRD	0x00000004	/* Memory read cycle */
-#define	COMEM_DA_MEMWR	0x00000004	/* Memory write cycle */
-#define	COMEM_DA_IORD	0x00000002	/* I/O read cycle */
-#define	COMEM_DA_IOWR	0x00000002	/* I/O write cycle */
-#define	COMEM_DA_CFGRD	0x00000006	/* Configuration read cycle */
-#define	COMEM_DA_CFGWR	0x00000006	/* Configuration write cycle */
-
-#define	COMEM_DA_ADDR(a)	((a) & 0xffffe000)
-
-#define	COMEM_DA_OFFSET(a)	((a) & 0x00001fff)
-
-
-/*
- *	The PCI bus will be limited in what slots will actually be used.
- *	Define valid device numbers for different boards.
- */
-#if defined(CONFIG_M5407C3)
-#define	COMEM_MINDEV	14		/* Minimum valid DEVICE */
-#define	COMEM_MAXDEV	14		/* Maximum valid DEVICE */
-#define	COMEM_BRIDGEDEV	15		/* Slot bridge is in */
-#else
-#define	COMEM_MINDEV	0		/* Minimum valid DEVICE */
-#define	COMEM_MAXDEV	3		/* Maximum valid DEVICE */
-#endif
-
-#define	COMEM_MAXPCI	(COMEM_MAXDEV+1)	/* Maximum PCI devices */
-
-
-/****************************************************************************/
-#endif	/* anchor_h */
diff --git a/arch/m68k/include/asm/atarihw.h b/arch/m68k/include/asm/atarihw.h
index 0392b2865..c0cb363 100644
--- a/arch/m68k/include/asm/atarihw.h
+++ b/arch/m68k/include/asm/atarihw.h
@@ -30,6 +30,8 @@ extern u_long atari_switches;
 extern int atari_rtc_year_offset;
 extern int atari_dont_touch_floppy_select;
 
+extern int atari_SCC_reset_done;
+
 /* convenience macros for testing machine type */
 #define MACH_IS_ST	((atari_mch_cookie >> 16) == ATARI_MCH_ST)
 #define MACH_IS_STE	((atari_mch_cookie >> 16) == ATARI_MCH_STE && \
diff --git a/arch/m68k/include/asm/atomic.h b/arch/m68k/include/asm/atomic.h
index 65c6be6..4eba796 100644
--- a/arch/m68k/include/asm/atomic.h
+++ b/arch/m68k/include/asm/atomic.h
@@ -55,6 +55,16 @@ static inline int atomic_dec_and_test(atomic_t *v)
 	return c != 0;
 }
 
+static inline int atomic_dec_and_test_lt(atomic_t *v)
+{
+	char c;
+	__asm__ __volatile__(
+		"subql #1,%1; slt %0"
+		: "=d" (c), "=m" (*v)
+		: "m" (*v));
+	return c != 0;
+}
+
 static inline int atomic_inc_and_test(atomic_t *v)
 {
 	char c;
diff --git a/arch/m68k/include/asm/blinken.h b/arch/m68k/include/asm/blinken.h
index 1a749cf..0626582 100644
--- a/arch/m68k/include/asm/blinken.h
+++ b/arch/m68k/include/asm/blinken.h
@@ -17,15 +17,15 @@
 
 #define HP300_LEDS		0xf001ffff
 
-extern unsigned char ledstate;
+extern unsigned char hp300_ledstate;
 
 static __inline__ void blinken_leds(int on, int off)
 {
 	if (MACH_IS_HP300)
 	{
-		ledstate |= on;
-		ledstate &= ~off;
-		out_8(HP300_LEDS, ~ledstate);
+		hp300_ledstate |= on;
+		hp300_ledstate &= ~off;
+		out_8(HP300_LEDS, ~hp300_ledstate);
 	}
 }
 
diff --git a/arch/m68k/include/asm/cacheflush_mm.h b/arch/m68k/include/asm/cacheflush_mm.h
index 73de7c8..8104bd8 100644
--- a/arch/m68k/include/asm/cacheflush_mm.h
+++ b/arch/m68k/include/asm/cacheflush_mm.h
@@ -2,23 +2,89 @@
 #define _M68K_CACHEFLUSH_H
 
 #include <linux/mm.h>
+#ifdef CONFIG_COLDFIRE
+#include <asm/mcfsim.h>
+#endif
 
 /* cache code */
 #define FLUSH_I_AND_D	(0x00000808)
 #define FLUSH_I		(0x00000008)
 
+#ifndef ICACHE_MAX_ADDR
+#define ICACHE_MAX_ADDR	0
+#define ICACHE_SET_MASK	0
+#define DCACHE_MAX_ADDR	0
+#define DCACHE_SETMASK	0
+#endif
+
+static inline void flush_cf_icache(unsigned long start, unsigned long end)
+{
+	unsigned long set;
+
+	for (set = start; set <= end; set += (0x10 - 3)) {
+		__asm__ __volatile__ (
+			"cpushl %%ic,(%0)\n\t"
+			"addq%.l #1,%0\n\t"
+			"cpushl %%ic,(%0)\n\t"
+			"addq%.l #1,%0\n\t"
+			"cpushl %%ic,(%0)\n\t"
+			"addq%.l #1,%0\n\t"
+			"cpushl %%ic,(%0)"
+			: "=a" (set)
+			: "a" (set));
+	}
+}
+
+static inline void flush_cf_dcache(unsigned long start, unsigned long end)
+{
+	unsigned long set;
+
+	for (set = start; set <= end; set += (0x10 - 3)) {
+		__asm__ __volatile__ (
+			"cpushl %%dc,(%0)\n\t"
+			"addq%.l #1,%0\n\t"
+			"cpushl %%dc,(%0)\n\t"
+			"addq%.l #1,%0\n\t"
+			"cpushl %%dc,(%0)\n\t"
+			"addq%.l #1,%0\n\t"
+			"cpushl %%dc,(%0)"
+			: "=a" (set)
+			: "a" (set));
+	}
+}
+
+static inline void flush_cf_bcache(unsigned long start, unsigned long end)
+{
+	unsigned long set;
+
+	for (set = start; set <= end; set += (0x10 - 3)) {
+		__asm__ __volatile__ (
+			"cpushl %%bc,(%0)\n\t"
+			"addq%.l #1,%0\n\t"
+			"cpushl %%bc,(%0)\n\t"
+			"addq%.l #1,%0\n\t"
+			"cpushl %%bc,(%0)\n\t"
+			"addq%.l #1,%0\n\t"
+			"cpushl %%bc,(%0)"
+			: "=a" (set)
+			: "a" (set));
+	}
+}
+
 /*
  * Cache handling functions
  */
 
 static inline void flush_icache(void)
 {
-	if (CPU_IS_040_OR_060)
+	if (CPU_IS_COLDFIRE) {
+		flush_cf_icache(0, ICACHE_MAX_ADDR);
+	} else if (CPU_IS_040_OR_060) {
 		asm volatile (	"nop\n"
 			"	.chip	68040\n"
 			"	cpusha	%bc\n"
 			"	.chip	68k");
-	else {
+	} else {
 		unsigned long tmp;
 		asm volatile (	"movec	%%cacr,%0\n"
 			"	or.w	%1,%0\n"
@@ -51,12 +117,14 @@ extern void cache_push_v(unsigned long vaddr, int len);
    process changes.  */
 #define __flush_cache_all()					\
 ({								\
-	if (CPU_IS_040_OR_060)					\
+	if (CPU_IS_COLDFIRE) {					\
+		flush_cf_dcache(0, DCACHE_MAX_ADDR);		\
+	} else if (CPU_IS_040_OR_060) {				\
 		__asm__ __volatile__("nop\n\t"			\
 				     ".chip 68040\n\t"		\
 				     "cpusha %dc\n\t"		\
 				     ".chip 68k");		\
-	else {							\
+	} else {						\
 		unsigned long _tmp;				\
 		__asm__ __volatile__("movec %%cacr,%0\n\t"	\
 				     "orw %1,%0\n\t"		\
@@ -112,7 +180,17 @@ static inline void flush_cache_page(struct vm_area_struct *vma, unsigned long vm
 /* RZ: use cpush %bc instead of cpush %dc, cinv %ic */
 static inline void __flush_page_to_ram(void *vaddr)
 {
-	if (CPU_IS_040_OR_060) {
+	if (CPU_IS_COLDFIRE) {
+		unsigned long addr, start, end;
+		addr = ((unsigned long) vaddr) & ~(PAGE_SIZE - 1);
+		start = addr & ICACHE_SET_MASK;
+		end = (addr + PAGE_SIZE - 1) & ICACHE_SET_MASK;
+		if (start > end) {
+			flush_cf_bcache(0, end);
+			end = ICACHE_MAX_ADDR;
+		}
+		flush_cf_bcache(start, end);
+	} else if (CPU_IS_040_OR_060) {
 		__asm__ __volatile__("nop\n\t"
 				     ".chip 68040\n\t"
 				     "cpushp %%bc,(%0)\n\t"
diff --git a/arch/m68k/include/asm/checksum.h b/arch/m68k/include/asm/checksum.h
index ec51448..2f88d86 100644
--- a/arch/m68k/include/asm/checksum.h
+++ b/arch/m68k/include/asm/checksum.h
@@ -3,6 +3,10 @@
 
 #include <linux/in6.h>
 
+#ifdef CONFIG_GENERIC_CSUM
+#include <asm-generic/checksum.h>
+#else
+
 /*
  * computes the checksum of a memory block at buff, length len,
  * and adds in "sum" (32-bit)
@@ -34,30 +38,6 @@ extern __wsum csum_partial_copy_nocheck(const void *src,
 					      void *dst, int len,
 					      __wsum sum);
 
-
-#ifdef CONFIG_COLDFIRE
-
-/*
- *	The ColdFire cores don't support all the 68k instructions used
- *	in the optimized checksum code below. So it reverts back to using
- *	more standard C coded checksums. The fast checksum code is
- *	significantly larger than the optimized version, so it is not
- *	inlined here.
- */
-__sum16 ip_fast_csum(const void *iph, unsigned int ihl);
-
-static inline __sum16 csum_fold(__wsum sum)
-{
-	unsigned int tmp = (__force u32)sum;
-
-	tmp = (tmp & 0xffff) + (tmp >> 16);
-	tmp = (tmp & 0xffff) + (tmp >> 16);
-
-	return (__force __sum16)~tmp;
-}
-
-#else
-
 /*
  *	This is a version of ip_fast_csum() optimized for IP headers,
  *	which always checksum on 4 octet boundaries.
@@ -97,8 +77,6 @@ static inline __sum16 csum_fold(__wsum sum)
 	return (__force __sum16)~sum;
 }
 
-#endif /* CONFIG_COLDFIRE */
-
 static inline __wsum
 csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
 		  unsigned short proto, __wsum sum)
@@ -167,4 +145,5 @@ csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr,
 	return csum_fold(sum);
 }
 
+#endif /* CONFIG_GENERIC_CSUM */
 #endif /* _M68K_CHECKSUM_H */
diff --git a/arch/m68k/include/asm/div64.h b/arch/m68k/include/asm/div64.h
index edb6614..444ea8a 100644
--- a/arch/m68k/include/asm/div64.h
+++ b/arch/m68k/include/asm/div64.h
@@ -1,7 +1,9 @@
 #ifndef _M68K_DIV64_H
 #define _M68K_DIV64_H
 
-#ifdef CONFIG_MMU
+#ifdef CONFIG_CPU_HAS_NO_MULDIV64
+#include <asm-generic/div64.h>
+#else
 
 #include <linux/types.h>
 
@@ -27,8 +29,6 @@
 	__rem;							\
 })
 
-#else
-#include <asm-generic/div64.h>
-#endif /* CONFIG_MMU */
+#endif /* CONFIG_CPU_HAS_NO_MULDIV64 */
 
 #endif /* _M68K_DIV64_H */
diff --git a/arch/m68k/include/asm/elf.h b/arch/m68k/include/asm/elf.h
index 01c193d..e9b7cda5 100644
--- a/arch/m68k/include/asm/elf.h
+++ b/arch/m68k/include/asm/elf.h
@@ -59,10 +59,10 @@ typedef struct user_m68kfp_struct elf_fpregset_t;
    is actually used on ASV.  */
 #define ELF_PLAT_INIT(_r, load_addr)	_r->a1 = 0
 
-#ifndef CONFIG_SUN3
-#define ELF_EXEC_PAGESIZE	4096
-#else
+#if defined(CONFIG_SUN3) || defined(CONFIG_COLDFIRE)
 #define ELF_EXEC_PAGESIZE	8192
+#else
+#define ELF_EXEC_PAGESIZE	4096
 #endif
 
 /* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
diff --git a/arch/m68k/include/asm/entry.h b/arch/m68k/include/asm/entry.h
index c3c5a86..622138d 100644
--- a/arch/m68k/include/asm/entry.h
+++ b/arch/m68k/include/asm/entry.h
@@ -222,16 +222,24 @@
  * Non-MMU systems do not reserve %a2 in this way, and this definition is
  * not used for them.
  */
+#ifdef CONFIG_MMU
+
 #define curptr a2
 
 #define GET_CURRENT(tmp) get_current tmp
 .macro get_current reg=%d0
 	movel	%sp,\reg
-	andw	#-THREAD_SIZE,\reg
+	andl	#-THREAD_SIZE,\reg
 	movel	\reg,%curptr
 	movel	%curptr@,%curptr
 .endm
 
+#else
+
+#define GET_CURRENT(tmp)
+
+#endif /* CONFIG_MMU */
+
 #else /* C source */
 
 #define STR(X) STR1(X)
diff --git a/arch/m68k/include/asm/fpu.h b/arch/m68k/include/asm/fpu.h
index ffb6b8c..526db9d 100644
--- a/arch/m68k/include/asm/fpu.h
+++ b/arch/m68k/include/asm/fpu.h
@@ -12,6 +12,8 @@
 #define FPSTATESIZE (96)
 #elif defined(CONFIG_M68KFPU_EMU)
 #define FPSTATESIZE (28)
+#elif defined(CONFIG_COLDFIRE) && defined(CONFIG_MMU)
+#define FPSTATESIZE (16)
 #elif defined(CONFIG_M68060)
 #define FPSTATESIZE (12)
 #else
diff --git a/arch/m68k/include/asm/gpio.h b/arch/m68k/include/asm/gpio.h
index b204683..00d0071 100644
--- a/arch/m68k/include/asm/gpio.h
+++ b/arch/m68k/include/asm/gpio.h
@@ -225,7 +225,8 @@ static inline void gpio_set_value(unsigned gpio, int value)
 
 static inline int gpio_to_irq(unsigned gpio)
 {
-	return (gpio < MCFGPIO_IRQ_MAX) ? gpio + MCFGPIO_IRQ_VECBASE : -EINVAL;
+	return (gpio < MCFGPIO_IRQ_MAX) ? gpio + MCFGPIO_IRQ_VECBASE
+		: __gpio_to_irq(gpio);
 }
 
 static inline int irq_to_gpio(unsigned irq)
diff --git a/arch/m68k/include/asm/ipcbuf.h b/arch/m68k/include/asm/ipcbuf.h
index a623ea3..84c7e51 100644
--- a/arch/m68k/include/asm/ipcbuf.h
+++ b/arch/m68k/include/asm/ipcbuf.h
@@ -1,29 +1 @@
-#ifndef __m68k_IPCBUF_H__
-#define __m68k_IPCBUF_H__
-
-/*
- * The user_ipc_perm structure for m68k architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit mode_t and seq
- * - 2 miscellaneous 32-bit values
- */
-
-struct ipc64_perm
-{
-	__kernel_key_t		key;
-	__kernel_uid32_t	uid;
-	__kernel_gid32_t	gid;
-	__kernel_uid32_t	cuid;
-	__kernel_gid32_t	cgid;
-	__kernel_mode_t		mode;
-	unsigned short		__pad1;
-	unsigned short		seq;
-	unsigned short		__pad2;
-	unsigned long		__unused1;
-	unsigned long		__unused2;
-};
-
-#endif /* __m68k_IPCBUF_H__ */
+#include <asm-generic/ipcbuf.h>
diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h
index 6198df5..0e89fa0 100644
--- a/arch/m68k/include/asm/irq.h
+++ b/arch/m68k/include/asm/irq.h
@@ -25,7 +25,8 @@
 #define NR_IRQS	0
 #endif
 
-#ifdef CONFIG_MMU
+#if defined(CONFIG_M68020) || defined(CONFIG_M68030) || \
+    defined(CONFIG_M68040) || defined(CONFIG_M68060)
 
 /*
  * Interrupt source definitions
@@ -80,7 +81,7 @@ extern unsigned int irq_canonicalize(unsigned int irq);
 
 #else
 #define irq_canonicalize(irq)  (irq)
-#endif /* CONFIG_MMU */
+#endif /* !(CONFIG_M68020 || CONFIG_M68030 || CONFIG_M68040 || CONFIG_M68060) */
 
 asmlinkage void do_IRQ(int irq, struct pt_regs *regs);
 extern atomic_t irq_err_count;
diff --git a/arch/m68k/include/asm/m54xxacr.h b/arch/m68k/include/asm/m54xxacr.h
index 16a1835..47906aa 100644
--- a/arch/m68k/include/asm/m54xxacr.h
+++ b/arch/m68k/include/asm/m54xxacr.h
@@ -39,8 +39,12 @@
 #define ACR_CM_OFF_PRE	0x00000040	/* No cache, precise */
 #define ACR_CM_OFF_IMP	0x00000060	/* No cache, imprecise */
 #define ACR_CM		0x00000060	/* Cache mode mask */
+#define ACR_SP		0x00000008	/* Supervisor protect */
 #define ACR_WPROTECT	0x00000004	/* Write protect */
 
+#define ACR_BA(x)	((x) & 0xff000000)
+#define ACR_ADMSK(x)	((((x) - 1) & 0xff000000) >> 8)
+
 #if defined(CONFIG_M5407)
 
 #define ICACHE_SIZE 0x4000	/* instruction - 16k */
@@ -56,6 +60,11 @@
 #define CACHE_LINE_SIZE 0x0010	/* 16 bytes */
 #define CACHE_WAYS 4		/* 4 ways */
 
+#define ICACHE_SET_MASK	((ICACHE_SIZE / 64 - 1) << CACHE_WAYS)
+#define DCACHE_SET_MASK	((DCACHE_SIZE / 64 - 1) << CACHE_WAYS)
+#define ICACHE_MAX_ADDR	ICACHE_SET_MASK
+#define DCACHE_MAX_ADDR	DCACHE_SET_MASK
+
 /*
  *	Version 4 cores have a true harvard style separate instruction
  *	and data cache. Enable data and instruction caches, also enable write
@@ -73,6 +82,27 @@
 #else
 #define CACHE_MODE (CACR_DEC+CACR_DESB+CACR_DDCM_P+CACR_BEC+CACR_IEC+CACR_EUSP)
 #endif
+#define CACHE_INIT (CACR_DCINVA+CACR_BCINVA+CACR_ICINVA)
+
+#if defined(CONFIG_MMU)
+/*
+ *	If running with the MMU enabled then we need to map the internal
+ *	register region as non-cacheable. And then we map all our RAM as
+ *	cacheable and supervisor access only.
+ */
+#define ACR0_MODE	(ACR_BA(CONFIG_MBAR)+ACR_ADMSK(0x1000000)+ \
+			 ACR_ENABLE+ACR_SUPER+ACR_CM_OFF_PRE+ACR_SP)
+#define ACR1_MODE	(ACR_BA(CONFIG_RAMBASE)+ACR_ADMSK(CONFIG_RAMSIZE)+ \
+			 ACR_ENABLE+ACR_SUPER+ACR_SP)
+#define ACR2_MODE	0
+#define ACR3_MODE	(ACR_BA(CONFIG_RAMBASE)+ACR_ADMSK(CONFIG_RAMSIZE)+ \
+			 ACR_ENABLE+ACR_SUPER+ACR_SP)
+
+#else
+
+/*
+ *	For the non-MMU enabled case we map all of RAM as cacheable.
+ */
 #if defined(CONFIG_CACHE_COPYBACK)
 #define DATA_CACHE_MODE (ACR_ENABLE+ACR_ANY+ACR_CM_CP)
 #else
@@ -80,7 +110,6 @@
 #endif
 #define INSN_CACHE_MODE (ACR_ENABLE+ACR_ANY)
 
-#define CACHE_INIT	(CACR_DCINVA+CACR_BCINVA+CACR_ICINVA)
 #define CACHE_INVALIDATE  (CACHE_MODE+CACR_DCINVA+CACR_BCINVA+CACR_ICINVA)
 #define CACHE_INVALIDATEI (CACHE_MODE+CACR_BCINVA+CACR_ICINVA)
 #define CACHE_INVALIDATED (CACHE_MODE+CACR_DCINVA)
@@ -94,4 +123,5 @@
 #define	CACHE_PUSH
 #endif
 
+#endif /* CONFIG_MMU */
 #endif	/* m54xxacr_h */
diff --git a/arch/m68k/include/asm/mac_baboon.h b/arch/m68k/include/asm/mac_baboon.h
index c2a042b..a2d32f6 100644
--- a/arch/m68k/include/asm/mac_baboon.h
+++ b/arch/m68k/include/asm/mac_baboon.h
@@ -29,4 +29,10 @@ struct baboon {
 				 */
 };
 
+extern int baboon_present;
+
+extern void baboon_register_interrupts(void);
+extern void baboon_irq_enable(int);
+extern void baboon_irq_disable(int);
+
 #endif /* __ASSEMBLY **/
diff --git a/arch/m68k/include/asm/mac_iop.h b/arch/m68k/include/asm/mac_iop.h
index a2c7e6f..fde874a 100644
--- a/arch/m68k/include/asm/mac_iop.h
+++ b/arch/m68k/include/asm/mac_iop.h
@@ -159,4 +159,6 @@ extern void iop_upload_code(uint, __u8 *, uint, __u16);
 extern void iop_download_code(uint, __u8 *, uint, __u16);
 extern __u8 *iop_compare_code(uint, __u8 *, uint, __u16);
 
+extern void iop_register_interrupts(void);
+
 #endif /* __ASSEMBLY__ */
diff --git a/arch/m68k/include/asm/mac_oss.h b/arch/m68k/include/asm/mac_oss.h
index 3cf2b6e..425fbff 100644
--- a/arch/m68k/include/asm/mac_oss.h
+++ b/arch/m68k/include/asm/mac_oss.h
@@ -58,25 +58,6 @@
 
 #define OSS_POWEROFF	0x80
 
-/*
- * OSS Interrupt levels for various sub-systems
- *
- * This mapping is laid out with two things in mind: first, we try to keep
- * things on their own levels to avoid having to do double-dispatches. Second,
- * the levels match as closely as possible the alternate IRQ mapping mode (aka
- * "A/UX mode") available on some VIA machines.
- */
-
-#define OSS_IRQLEV_DISABLED	0
-#define OSS_IRQLEV_IOPISM	1	/* ADB? */
-#define OSS_IRQLEV_SCSI		IRQ_AUTO_2
-#define OSS_IRQLEV_NUBUS	IRQ_AUTO_3	/* keep this on its own level */
-#define OSS_IRQLEV_IOPSCC	IRQ_AUTO_4	/* matches VIA alternate mapping */
-#define OSS_IRQLEV_SOUND	IRQ_AUTO_5	/* matches VIA alternate mapping */
-#define OSS_IRQLEV_60HZ		6	/* matches VIA alternate mapping */
-#define OSS_IRQLEV_VIA1		IRQ_AUTO_6	/* matches VIA alternate mapping */
-#define OSS_IRQLEV_PARITY	7	/* matches VIA alternate mapping */
-
 #ifndef __ASSEMBLY__
 
 struct mac_oss {
@@ -91,4 +72,8 @@ struct mac_oss {
 extern volatile struct mac_oss *oss;
 extern int oss_present;
 
+extern void oss_register_interrupts(void);
+extern void oss_irq_enable(int);
+extern void oss_irq_disable(int);
+
 #endif /* __ASSEMBLY__ */
diff --git a/arch/m68k/include/asm/mac_psc.h b/arch/m68k/include/asm/mac_psc.h
index 7808bb0..e5c0d71 100644
--- a/arch/m68k/include/asm/mac_psc.h
+++ b/arch/m68k/include/asm/mac_psc.h
@@ -211,6 +211,10 @@
 extern volatile __u8 *psc;
 extern int psc_present;
 
+extern void psc_register_interrupts(void);
+extern void psc_irq_enable(int);
+extern void psc_irq_disable(int);
+
 /*
  *	Access functions
  */
diff --git a/arch/m68k/include/asm/mac_via.h b/arch/m68k/include/asm/mac_via.h
index a59665e..aeeedf8 100644
--- a/arch/m68k/include/asm/mac_via.h
+++ b/arch/m68k/include/asm/mac_via.h
@@ -254,6 +254,15 @@
 extern volatile __u8 *via1,*via2;
 extern int rbv_present,via_alt_mapping;
 
+extern void via_register_interrupts(void);
+extern void via_irq_enable(int);
+extern void via_irq_disable(int);
+extern void via_nubus_irq_startup(int irq);
+extern void via_nubus_irq_shutdown(int irq);
+extern void via1_irq(unsigned int irq, struct irq_desc *desc);
+extern void via1_set_head(int);
+extern int via2_scsi_drq_pending(void);
+
 static inline int rbv_set_video_bpp(int bpp)
 {
 	char val = (bpp==1)?0:(bpp==2)?1:(bpp==4)?2:(bpp==8)?3:-1;
diff --git a/arch/m68k/include/asm/macintosh.h b/arch/m68k/include/asm/macintosh.h
index 12ebe43..682a1a2 100644
--- a/arch/m68k/include/asm/macintosh.h
+++ b/arch/m68k/include/asm/macintosh.h
@@ -11,17 +11,11 @@
 extern void mac_reset(void);
 extern void mac_poweroff(void);
 extern void mac_init_IRQ(void);
-extern int mac_irq_pending(unsigned int);
+
 extern void mac_irq_enable(struct irq_data *data);
 extern void mac_irq_disable(struct irq_data *data);
 
 /*
- *	Floppy driver magic hook - probably shouldn't be here
- */
-
-extern void via1_set_head(int);
-
-/*
  *	Macintosh Table
  */
 
@@ -48,7 +42,7 @@ struct mac_model
 #define MAC_ADB_IOP		6
 
 #define MAC_VIA_II		1
-#define MAC_VIA_IIci		2
+#define MAC_VIA_IICI		2
 #define MAC_VIA_QUADRA		3
 
 #define MAC_SCSI_NONE		0
diff --git a/arch/m68k/include/asm/macints.h b/arch/m68k/include/asm/macints.h
index ebe1b70..92aa8a4 100644
--- a/arch/m68k/include/asm/macints.h
+++ b/arch/m68k/include/asm/macints.h
@@ -104,6 +104,9 @@
 #define IRQ_PSC4_3	  (35)
 #define IRQ_MAC_MACE_DMA  IRQ_PSC4_3
 
+/* OSS Level 4 interrupts */
+#define IRQ_MAC_SCC	  (33)
+
 /* Level 5 (PSC, AV Macs only) interrupts */
 #define IRQ_PSC5_0	  (40)
 #define IRQ_PSC5_1	  (41)
@@ -131,9 +134,6 @@
 #define IRQ_BABOON_2	  (66)
 #define IRQ_BABOON_3	  (67)
 
-/* On non-PSC machines, the serial ports share an IRQ */
-#define IRQ_MAC_SCC	  IRQ_AUTO_4
-
 #define SLOT2IRQ(x)	  (x + 47)
 #define IRQ2SLOT(x)	  (x - 47)
 
diff --git a/arch/m68k/include/asm/mcf_pgalloc.h b/arch/m68k/include/asm/mcf_pgalloc.h
new file mode 100644
index 0000000..313f3dd
--- /dev/null
+++ b/arch/m68k/include/asm/mcf_pgalloc.h
@@ -0,0 +1,102 @@
+#ifndef M68K_MCF_PGALLOC_H
+#define M68K_MCF_PGALLOC_H
+
+#include <asm/tlb.h>
+#include <asm/tlbflush.h>
+
+extern inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+	free_page((unsigned long) pte);
+}
+
+extern const char bad_pmd_string[];
+
+extern inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
+	unsigned long address)
+{
+	unsigned long page = __get_free_page(GFP_DMA|__GFP_REPEAT);
+
+	if (!page)
+		return NULL;
+
+	memset((void *)page, 0, PAGE_SIZE);
+	return (pte_t *) (page);
+}
+
+extern inline pmd_t *pmd_alloc_kernel(pgd_t *pgd, unsigned long address)
+{
+	return (pmd_t *) pgd;
+}
+
+#define pmd_alloc_one_fast(mm, address) ({ BUG(); ((pmd_t *)1); })
+#define pmd_alloc_one(mm, address)      ({ BUG(); ((pmd_t *)2); })
+
+#define pte_alloc_one_fast(mm, addr) pte_alloc_one(mm, addr)
+
+#define pmd_populate(mm, pmd, page) (pmd_val(*pmd) = \
+	(unsigned long)(page_address(page)))
+
+#define pmd_populate_kernel(mm, pmd, pte) (pmd_val(*pmd) = (unsigned long)(pte))
+
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t page,
+				  unsigned long address)
+{
+	__free_page(page);
+}
+
+#define __pmd_free_tlb(tlb, pmd, address) do { } while (0)
+
+static inline struct page *pte_alloc_one(struct mm_struct *mm,
+	unsigned long address)
+{
+	struct page *page = alloc_pages(GFP_DMA|__GFP_REPEAT, 0);
+	pte_t *pte;
+
+	if (!page)
+		return NULL;
+
+	pte = kmap(page);
+	if (pte) {
+		clear_page(pte);
+		__flush_page_to_ram(pte);
+		flush_tlb_kernel_page(pte);
+		nocache_page(pte);
+	}
+	kunmap(page);
+
+	return page;
+}
+
+extern inline void pte_free(struct mm_struct *mm, struct page *page)
+{
+	__free_page(page);
+}
+
+/*
+ * In our implementation, each pgd entry contains 1 pmd that is never allocated
+ * or freed.  pgd_present is always 1, so this should never be called. -NL
+ */
+#define pmd_free(mm, pmd) BUG()
+
+static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+	free_page((unsigned long) pgd);
+}
+
+static inline pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+	pgd_t *new_pgd;
+
+	new_pgd = (pgd_t *)__get_free_page(GFP_DMA | __GFP_NOWARN);
+	if (!new_pgd)
+		return NULL;
+	memcpy(new_pgd, swapper_pg_dir, PAGE_SIZE);
+	memset(new_pgd, 0, PAGE_OFFSET >> PGDIR_SHIFT);
+	return new_pgd;
+}
+
+#define pgd_populate(mm, pmd, pte) BUG()
+
+#endif /* M68K_MCF_PGALLOC_H */
diff --git a/arch/m68k/include/asm/mcf_pgtable.h b/arch/m68k/include/asm/mcf_pgtable.h
new file mode 100644
index 0000000..756bde4
--- /dev/null
+++ b/arch/m68k/include/asm/mcf_pgtable.h
@@ -0,0 +1,425 @@
+#ifndef _MCF_PGTABLE_H
+#define _MCF_PGTABLE_H
+
+#include <asm/mcfmmu.h>
+#include <asm/page.h>
+
+/*
+ * MMUDR bits, in proper place. We write these directly into the MMUDR
+ * after masking from the pte.
+ */
+#define CF_PAGE_LOCKED		MMUDR_LK	/* 0x00000002 */
+#define CF_PAGE_EXEC		MMUDR_X		/* 0x00000004 */
+#define CF_PAGE_WRITABLE	MMUDR_W		/* 0x00000008 */
+#define CF_PAGE_READABLE	MMUDR_R		/* 0x00000010 */
+#define CF_PAGE_SYSTEM		MMUDR_SP	/* 0x00000020 */
+#define CF_PAGE_COPYBACK	MMUDR_CM_CCB	/* 0x00000040 */
+#define CF_PAGE_NOCACHE		MMUDR_CM_NCP	/* 0x00000080 */
+
+#define CF_CACHEMASK		(~MMUDR_CM_CCB)
+#define CF_PAGE_MMUDR_MASK	0x000000fe
+
+#define _PAGE_NOCACHE030	CF_PAGE_NOCACHE
+
+/*
+ * MMUTR bits, need shifting down.
+ */
+#define CF_PAGE_MMUTR_MASK	0x00000c00
+#define CF_PAGE_MMUTR_SHIFT	10
+
+#define CF_PAGE_VALID		(MMUTR_V << CF_PAGE_MMUTR_SHIFT)
+#define CF_PAGE_SHARED		(MMUTR_SG << CF_PAGE_MMUTR_SHIFT)
+
+/*
+ * Fake bits, not implemented in CF, will get masked out before
+ * hitting hardware.
+ */
+#define CF_PAGE_DIRTY		0x00000001
+#define CF_PAGE_FILE		0x00000200
+#define CF_PAGE_ACCESSED	0x00001000
+
+#define _PAGE_CACHE040		0x020   /* 68040 cache mode, cachable, copyback */
+#define _PAGE_NOCACHE_S		0x040   /* 68040 no-cache mode, serialized */
+#define _PAGE_NOCACHE		0x060   /* 68040 cache mode, non-serialized */
+#define _PAGE_CACHE040W		0x000   /* 68040 cache mode, cachable, write-through */
+#define _DESCTYPE_MASK		0x003
+#define _CACHEMASK040		(~0x060)
+#define _PAGE_GLOBAL040		0x400   /* 68040 global bit, used for kva descs */
+
+/*
+ * Externally used page protection values.
+ */
+#define _PAGE_PRESENT	(CF_PAGE_VALID)
+#define _PAGE_ACCESSED	(CF_PAGE_ACCESSED)
+#define _PAGE_DIRTY	(CF_PAGE_DIRTY)
+#define _PAGE_READWRITE (CF_PAGE_READABLE \
+				| CF_PAGE_WRITABLE \
+				| CF_PAGE_SYSTEM \
+				| CF_PAGE_SHARED)
+
+/*
+ * Compound page protection values.
+ */
+#define PAGE_NONE	__pgprot(CF_PAGE_VALID \
+				 | CF_PAGE_ACCESSED)
+
+#define PAGE_SHARED     __pgprot(CF_PAGE_VALID \
+				 | CF_PAGE_ACCESSED \
+				 | CF_PAGE_SHARED)
+
+#define PAGE_INIT	__pgprot(CF_PAGE_VALID \
+				 | CF_PAGE_READABLE \
+				 | CF_PAGE_WRITABLE \
+				 | CF_PAGE_EXEC \
+				 | CF_PAGE_SYSTEM)
+
+#define PAGE_KERNEL	__pgprot(CF_PAGE_VALID \
+				 | CF_PAGE_ACCESSED \
+				 | CF_PAGE_READABLE \
+				 | CF_PAGE_WRITABLE \
+				 | CF_PAGE_EXEC \
+				 | CF_PAGE_SYSTEM)
+
+#define PAGE_COPY	__pgprot(CF_PAGE_VALID \
+				 | CF_PAGE_ACCESSED \
+				 | CF_PAGE_READABLE \
+				 | CF_PAGE_DIRTY)
+
+/*
+ * Page protections for initialising protection_map. See mm/mmap.c
+ * for use. In general, the bit positions are xwr, and P-items are
+ * private, the S-items are shared.
+ */
+#define __P000		PAGE_NONE
+#define __P001		__pgprot(CF_PAGE_VALID \
+				 | CF_PAGE_ACCESSED \
+				 | CF_PAGE_READABLE)
+#define __P010		__pgprot(CF_PAGE_VALID \
+				 | CF_PAGE_ACCESSED \
+				 | CF_PAGE_WRITABLE)
+#define __P011		__pgprot(CF_PAGE_VALID \
+				 | CF_PAGE_ACCESSED \
+				 | CF_PAGE_READABLE \
+				 | CF_PAGE_WRITABLE)
+#define __P100		__pgprot(CF_PAGE_VALID \
+				 | CF_PAGE_ACCESSED \
+				 | CF_PAGE_EXEC)
+#define __P101		__pgprot(CF_PAGE_VALID \
+				 | CF_PAGE_ACCESSED \
+				 | CF_PAGE_READABLE \
+				 | CF_PAGE_EXEC)
+#define __P110		__pgprot(CF_PAGE_VALID \
+				 | CF_PAGE_ACCESSED \
+				 | CF_PAGE_WRITABLE \
+				 | CF_PAGE_EXEC)
+#define __P111		__pgprot(CF_PAGE_VALID \
+				 | CF_PAGE_ACCESSED \
+				 | CF_PAGE_READABLE \
+				 | CF_PAGE_WRITABLE \
+				 | CF_PAGE_EXEC)
+
+#define __S000		PAGE_NONE
+#define __S001		__pgprot(CF_PAGE_VALID \
+				 | CF_PAGE_ACCESSED \
+				 | CF_PAGE_READABLE)
+#define __S010		PAGE_SHARED
+#define __S011		__pgprot(CF_PAGE_VALID \
+				 | CF_PAGE_ACCESSED \
+				 | CF_PAGE_SHARED \
+				 | CF_PAGE_READABLE)
+#define __S100		__pgprot(CF_PAGE_VALID \
+				 | CF_PAGE_ACCESSED \
+				 | CF_PAGE_EXEC)
+#define __S101		__pgprot(CF_PAGE_VALID \
+				 | CF_PAGE_ACCESSED \
+				 | CF_PAGE_READABLE \
+				 | CF_PAGE_EXEC)
+#define __S110		__pgprot(CF_PAGE_VALID \
+				 | CF_PAGE_ACCESSED \
+				 | CF_PAGE_SHARED \
+				 | CF_PAGE_EXEC)
+#define __S111		__pgprot(CF_PAGE_VALID \
+				 | CF_PAGE_ACCESSED \
+				 | CF_PAGE_SHARED \
+				 | CF_PAGE_READABLE \
+				 | CF_PAGE_EXEC)
+
+#define PTE_MASK	PAGE_MASK
+#define CF_PAGE_CHG_MASK (PTE_MASK | CF_PAGE_ACCESSED | CF_PAGE_DIRTY)
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	pte_val(pte) = (pte_val(pte) & CF_PAGE_CHG_MASK) | pgprot_val(newprot);
+	return pte;
+}
+
+#define pmd_set(pmdp, ptep) do {} while (0)
+
+static inline void pgd_set(pgd_t *pgdp, pmd_t *pmdp)
+{
+	pgd_val(*pgdp) = virt_to_phys(pmdp);
+}
+
+#define __pte_page(pte)	((unsigned long) (pte_val(pte) & PAGE_MASK))
+#define __pmd_page(pmd)	((unsigned long) (pmd_val(pmd)))
+
+static inline int pte_none(pte_t pte)
+{
+	return !pte_val(pte);
+}
+
+static inline int pte_present(pte_t pte)
+{
+	return pte_val(pte) & CF_PAGE_VALID;
+}
+
+static inline void pte_clear(struct mm_struct *mm, unsigned long addr,
+	pte_t *ptep)
+{
+	pte_val(*ptep) = 0;
+}
+
+#define pte_pagenr(pte)	((__pte_page(pte) - PAGE_OFFSET) >> PAGE_SHIFT)
+#define pte_page(pte)	virt_to_page(__pte_page(pte))
+
+static inline int pmd_none2(pmd_t *pmd) { return !pmd_val(*pmd); }
+#define pmd_none(pmd) pmd_none2(&(pmd))
+static inline int pmd_bad2(pmd_t *pmd) { return 0; }
+#define pmd_bad(pmd) pmd_bad2(&(pmd))
+#define pmd_present(pmd) (!pmd_none2(&(pmd)))
+static inline void pmd_clear(pmd_t *pmdp) { pmd_val(*pmdp) = 0; }
+
+static inline int pgd_none(pgd_t pgd) { return 0; }
+static inline int pgd_bad(pgd_t pgd) { return 0; }
+static inline int pgd_present(pgd_t pgd) { return 1; }
+static inline void pgd_clear(pgd_t *pgdp) {}
+
+#define pte_ERROR(e) \
+	printk(KERN_ERR "%s:%d: bad pte %08lx.\n",	\
+	__FILE__, __LINE__, pte_val(e))
+#define pmd_ERROR(e) \
+	printk(KERN_ERR "%s:%d: bad pmd %08lx.\n",	\
+	__FILE__, __LINE__, pmd_val(e))
+#define pgd_ERROR(e) \
+	printk(KERN_ERR "%s:%d: bad pgd %08lx.\n",	\
+	__FILE__, __LINE__, pgd_val(e))
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not...
+ * [we have the full set here even if they don't change from m68k]
+ */
+static inline int pte_read(pte_t pte)
+{
+	return pte_val(pte) & CF_PAGE_READABLE;
+}
+
+static inline int pte_write(pte_t pte)
+{
+	return pte_val(pte) & CF_PAGE_WRITABLE;
+}
+
+static inline int pte_exec(pte_t pte)
+{
+	return pte_val(pte) & CF_PAGE_EXEC;
+}
+
+static inline int pte_dirty(pte_t pte)
+{
+	return pte_val(pte) & CF_PAGE_DIRTY;
+}
+
+static inline int pte_young(pte_t pte)
+{
+	return pte_val(pte) & CF_PAGE_ACCESSED;
+}
+
+static inline int pte_file(pte_t pte)
+{
+	return pte_val(pte) & CF_PAGE_FILE;
+}
+
+static inline int pte_special(pte_t pte)
+{
+	return 0;
+}
+
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+	pte_val(pte) &= ~CF_PAGE_WRITABLE;
+	return pte;
+}
+
+static inline pte_t pte_rdprotect(pte_t pte)
+{
+	pte_val(pte) &= ~CF_PAGE_READABLE;
+	return pte;
+}
+
+static inline pte_t pte_exprotect(pte_t pte)
+{
+	pte_val(pte) &= ~CF_PAGE_EXEC;
+	return pte;
+}
+
+static inline pte_t pte_mkclean(pte_t pte)
+{
+	pte_val(pte) &= ~CF_PAGE_DIRTY;
+	return pte;
+}
+
+static inline pte_t pte_mkold(pte_t pte)
+{
+	pte_val(pte) &= ~CF_PAGE_ACCESSED;
+	return pte;
+}
+
+static inline pte_t pte_mkwrite(pte_t pte)
+{
+	pte_val(pte) |= CF_PAGE_WRITABLE;
+	return pte;
+}
+
+static inline pte_t pte_mkread(pte_t pte)
+{
+	pte_val(pte) |= CF_PAGE_READABLE;
+	return pte;
+}
+
+static inline pte_t pte_mkexec(pte_t pte)
+{
+	pte_val(pte) |= CF_PAGE_EXEC;
+	return pte;
+}
+
+static inline pte_t pte_mkdirty(pte_t pte)
+{
+	pte_val(pte) |= CF_PAGE_DIRTY;
+	return pte;
+}
+
+static inline pte_t pte_mkyoung(pte_t pte)
+{
+	pte_val(pte) |= CF_PAGE_ACCESSED;
+	return pte;
+}
+
+static inline pte_t pte_mknocache(pte_t pte)
+{
+	pte_val(pte) |= 0x80 | (pte_val(pte) & ~0x40);
+	return pte;
+}
+
+static inline pte_t pte_mkcache(pte_t pte)
+{
+	pte_val(pte) &= ~CF_PAGE_NOCACHE;
+	return pte;
+}
+
+static inline pte_t pte_mkspecial(pte_t pte)
+{
+	return pte;
+}
+
+#define swapper_pg_dir kernel_pg_dir
+extern pgd_t kernel_pg_dir[PTRS_PER_PGD];
+
+/*
+ * Find an entry in a pagetable directory.
+ */
+#define pgd_index(address)	((address) >> PGDIR_SHIFT)
+#define pgd_offset(mm, address)	((mm)->pgd + pgd_index(address))
+
+/*
+ * Find an entry in a kernel pagetable directory.
+ */
+#define pgd_offset_k(address)	pgd_offset(&init_mm, address)
+
+/*
+ * Find an entry in the second-level pagetable.
+ */
+static inline pmd_t *pmd_offset(pgd_t *pgd, unsigned long address)
+{
+	return (pmd_t *) pgd;
+}
+
+/*
+ * Find an entry in the third-level pagetable.
+ */
+#define __pte_offset(address)	((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset_kernel(dir, address) \
+	((pte_t *) __pmd_page(*(dir)) + __pte_offset(address))
+
+/*
+ * Disable caching for page at given kernel virtual address.
+ */
+static inline void nocache_page(void *vaddr)
+{
+	pgd_t *dir;
+	pmd_t *pmdp;
+	pte_t *ptep;
+	unsigned long addr = (unsigned long) vaddr;
+
+	dir = pgd_offset_k(addr);
+	pmdp = pmd_offset(dir, addr);
+	ptep = pte_offset_kernel(pmdp, addr);
+	*ptep = pte_mknocache(*ptep);
+}
+
+/*
+ * Enable caching for page at given kernel virtual address.
+ */
+static inline void cache_page(void *vaddr)
+{
+	pgd_t *dir;
+	pmd_t *pmdp;
+	pte_t *ptep;
+	unsigned long addr = (unsigned long) vaddr;
+
+	dir = pgd_offset_k(addr);
+	pmdp = pmd_offset(dir, addr);
+	ptep = pte_offset_kernel(pmdp, addr);
+	*ptep = pte_mkcache(*ptep);
+}
+
+#define PTE_FILE_MAX_BITS	21
+#define PTE_FILE_SHIFT		11
+
+static inline unsigned long pte_to_pgoff(pte_t pte)
+{
+	return pte_val(pte) >> PTE_FILE_SHIFT;
+}
+
+static inline pte_t pgoff_to_pte(unsigned pgoff)
+{
+	return __pte((pgoff << PTE_FILE_SHIFT) + CF_PAGE_FILE);
+}
+
+/*
+ * Encode and de-code a swap entry (must be !pte_none(e) && !pte_present(e))
+ */
+#define __swp_type(x)		((x).val & 0xFF)
+#define __swp_offset(x)		((x).val >> PTE_FILE_SHIFT)
+#define __swp_entry(typ, off)	((swp_entry_t) { (typ) | \
+					(off << PTE_FILE_SHIFT) })
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)	(__pte((x).val))
+
+#define pmd_page(pmd)		(pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT))
+
+#define pte_offset_map(pmdp, addr) ((pte_t *)__pmd_page(*pmdp) + \
+				       __pte_offset(addr))
+#define pte_unmap(pte)		((void) 0)
+#define pfn_pte(pfn, prot)	__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#define pte_pfn(pte)		(pte_val(pte) >> PAGE_SHIFT)
+
+#endif	/* !__ASSEMBLY__ */
+#endif	/* _MCF_PGTABLE_H */
diff --git a/arch/m68k/include/asm/mcfmmu.h b/arch/m68k/include/asm/mcfmmu.h
new file mode 100644
index 0000000..26cc3d5
--- /dev/null
+++ b/arch/m68k/include/asm/mcfmmu.h
@@ -0,0 +1,112 @@
+/*
+ *	mcfmmu.h -- definitions for the ColdFire v4e MMU
+ *
+ *	(C) Copyright 2011,  Greg Ungerer <gerg@uclinux.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef	MCFMMU_H
+#define	MCFMMU_H
+
+/*
+ *	The MMU support registers are mapped into the address space using
+ *	the processor MMUBASE register. We used a fixed address for mapping,
+ *	there doesn't seem any need to make this configurable yet.
+ */
+#define	MMUBASE		0xfe000000
+
+/*
+ *	The support registers of the MMU. Names are the sames as those
+ *	used in the Freescale v4e documentation.
+ */
+#define	MMUCR		(MMUBASE + 0x00)	/* Control register */
+#define	MMUOR		(MMUBASE + 0x04)	/* Operation register */
+#define	MMUSR		(MMUBASE + 0x08)	/* Status register */
+#define	MMUAR		(MMUBASE + 0x10)	/* TLB Address register */
+#define	MMUTR		(MMUBASE + 0x14)	/* TLB Tag register */
+#define	MMUDR		(MMUBASE + 0x18)	/* TLB Data register */
+
+/*
+ *	MMU Control register bit flags
+ */
+#define	MMUCR_EN	0x00000001		/* Virtual mode enable */
+#define	MMUCR_ASM	0x00000002		/* Address space mode */
+
+/*
+ *	MMU Operation register.
+ */
+#define	MMUOR_UAA	0x00000001		/* Update allocatiom address */
+#define	MMUOR_ACC	0x00000002		/* TLB access */
+#define	MMUOR_RD	0x00000004		/* TLB access read */
+#define	MMUOR_WR	0x00000000		/* TLB access write */
+#define	MMUOR_ADR	0x00000008		/* TLB address select */
+#define	MMUOR_ITLB	0x00000010		/* ITLB operation */
+#define	MMUOR_CAS	0x00000020		/* Clear non-locked ASID TLBs */
+#define	MMUOR_CNL	0x00000040		/* Clear non-locked TLBs */
+#define	MMUOR_CA	0x00000080		/* Clear all TLBs */
+#define	MMUOR_STLB	0x00000100		/* Search TLBs */
+#define	MMUOR_AAN	16			/* TLB allocation address */
+#define	MMUOR_AAMASK	0xffff0000		/* AA mask */
+
+/*
+ *	MMU Status register.
+ */
+#define	MMUSR_HIT	0x00000002		/* Search TLB hit */
+#define	MMUSR_WF	0x00000008		/* Write access fault */
+#define	MMUSR_RF	0x00000010		/* Read access fault */
+#define	MMUSR_SPF	0x00000020		/* Supervisor protect fault */
+
+/*
+ *	MMU Read/Write Tag register.
+ */
+#define	MMUTR_V		0x00000001		/* Valid */
+#define	MMUTR_SG	0x00000002		/* Shared global */
+#define	MMUTR_IDN	2			/* Address Space ID */
+#define	MMUTR_IDMASK	0x000003fc		/* ASID mask */
+#define	MMUTR_VAN	10			/* Virtual Address */
+#define	MMUTR_VAMASK	0xfffffc00		/* VA mask */
+
+/*
+ *	MMU Read/Write Data register.
+ */
+#define	MMUDR_LK	0x00000002		/* Lock entry */
+#define	MMUDR_X		0x00000004		/* Execute access enable */
+#define	MMUDR_W		0x00000008		/* Write access enable */
+#define	MMUDR_R		0x00000010		/* Read access enable */
+#define	MMUDR_SP	0x00000020		/* Supervisor access enable */
+#define	MMUDR_CM_CWT	0x00000000		/* Cachable write thru */
+#define	MMUDR_CM_CCB	0x00000040		/* Cachable copy back */
+#define	MMUDR_CM_NCP	0x00000080		/* Non-cachable precise */
+#define	MMUDR_CM_NCI	0x000000c0		/* Non-cachable imprecise */
+#define	MMUDR_SZ_1MB	0x00000000		/* 1MB page size */
+#define	MMUDR_SZ_4KB	0x00000100		/* 4kB page size */
+#define	MMUDR_SZ_8KB	0x00000200		/* 8kB page size */
+#define	MMUDR_SZ_1KB	0x00000300		/* 1kB page size */
+#define	MMUDR_PAN	10			/* Physical address */
+#define	MMUDR_PAMASK	0xfffffc00		/* PA mask */
+
+#ifndef __ASSEMBLY__
+
+/*
+ *	Simple access functions for the MMU registers. Nothing fancy
+ *	currently required, just simple 32bit access.
+ */
+static inline u32 mmu_read(u32 a)
+{
+	return *((volatile u32 *) a);
+}
+
+static inline void mmu_write(u32 a, u32 v)
+{
+	*((volatile u32 *) a) = v;
+	__asm__ __volatile__ ("nop");
+}
+
+int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word);
+
+#endif
+
+#endif	/* MCFMMU_H */
diff --git a/arch/m68k/include/asm/mmu_context.h b/arch/m68k/include/asm/mmu_context.h
index 7d4341e..dc3be99 100644
--- a/arch/m68k/include/asm/mmu_context.h
+++ b/arch/m68k/include/asm/mmu_context.h
@@ -8,7 +8,206 @@ static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
 }
 
 #ifdef CONFIG_MMU
-#ifndef CONFIG_SUN3
+
+#if defined(CONFIG_COLDFIRE)
+
+#include <asm/atomic.h>
+#include <asm/bitops.h>
+#include <asm/mcfmmu.h>
+#include <asm/mmu.h>
+
+#define NO_CONTEXT		256
+#define LAST_CONTEXT		255
+#define FIRST_CONTEXT		1
+
+extern unsigned long context_map[];
+extern mm_context_t next_mmu_context;
+
+extern atomic_t nr_free_contexts;
+extern struct mm_struct *context_mm[LAST_CONTEXT+1];
+extern void steal_context(void);
+
+static inline void get_mmu_context(struct mm_struct *mm)
+{
+	mm_context_t ctx;
+
+	if (mm->context != NO_CONTEXT)
+		return;
+	while (atomic_dec_and_test_lt(&nr_free_contexts)) {
+		atomic_inc(&nr_free_contexts);
+		steal_context();
+	}
+	ctx = next_mmu_context;
+	while (test_and_set_bit(ctx, context_map)) {
+		ctx = find_next_zero_bit(context_map, LAST_CONTEXT+1, ctx);
+		if (ctx > LAST_CONTEXT)
+			ctx = 0;
+	}
+	next_mmu_context = (ctx + 1) & LAST_CONTEXT;
+	mm->context = ctx;
+	context_mm[ctx] = mm;
+}
+
+/*
+ * Set up the context for a new address space.
+ */
+#define init_new_context(tsk, mm)	(((mm)->context = NO_CONTEXT), 0)
+
+/*
+ * We're finished using the context for an address space.
+ */
+static inline void destroy_context(struct mm_struct *mm)
+{
+	if (mm->context != NO_CONTEXT) {
+		clear_bit(mm->context, context_map);
+		mm->context = NO_CONTEXT;
+		atomic_inc(&nr_free_contexts);
+	}
+}
+
+static inline void set_context(mm_context_t context, pgd_t *pgd)
+{
+	__asm__ __volatile__ ("movec %0,%%asid" : : "d" (context));
+}
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+	struct task_struct *tsk)
+{
+	get_mmu_context(tsk->mm);
+	set_context(tsk->mm->context, next->pgd);
+}
+
+/*
+ * After we have set current->mm to a new value, this activates
+ * the context for the new mm so we see the new mappings.
+ */
+static inline void activate_mm(struct mm_struct *active_mm,
+	struct mm_struct *mm)
+{
+	get_mmu_context(mm);
+	set_context(mm->context, mm->pgd);
+}
+
+#define deactivate_mm(tsk, mm) do { } while (0)
+
+extern void mmu_context_init(void);
+#define prepare_arch_switch(next) load_ksp_mmu(next)
+
+static inline void load_ksp_mmu(struct task_struct *task)
+{
+	unsigned long flags;
+	struct mm_struct *mm;
+	int asid;
+	pgd_t *pgd;
+	pmd_t *pmd;
+	pte_t *pte;
+	unsigned long mmuar;
+
+	local_irq_save(flags);
+	mmuar = task->thread.ksp;
+
+	/* Search for a valid TLB entry, if one is found, don't remap */
+	mmu_write(MMUAR, mmuar);
+	mmu_write(MMUOR, MMUOR_STLB | MMUOR_ADR);
+	if (mmu_read(MMUSR) & MMUSR_HIT)
+		goto end;
+
+	if (mmuar >= PAGE_OFFSET) {
+		mm = &init_mm;
+	} else {
+		pr_info("load_ksp_mmu: non-kernel mm found: 0x%p\n", task->mm);
+		mm = task->mm;
+	}
+
+	if (!mm)
+		goto bug;
+
+	pgd = pgd_offset(mm, mmuar);
+	if (pgd_none(*pgd))
+		goto bug;
+
+	pmd = pmd_offset(pgd, mmuar);
+	if (pmd_none(*pmd))
+		goto bug;
+
+	pte = (mmuar >= PAGE_OFFSET) ? pte_offset_kernel(pmd, mmuar)
+				     : pte_offset_map(pmd, mmuar);
+	if (pte_none(*pte) || !pte_present(*pte))
+		goto bug;
+
+	set_pte(pte, pte_mkyoung(*pte));
+	asid = mm->context & 0xff;
+	if (!pte_dirty(*pte) && mmuar <= PAGE_OFFSET)
+		set_pte(pte, pte_wrprotect(*pte));
+
+	mmu_write(MMUTR, (mmuar & PAGE_MASK) | (asid << MMUTR_IDN) |
+		(((int)(pte->pte) & (int)CF_PAGE_MMUTR_MASK)
+		>> CF_PAGE_MMUTR_SHIFT) | MMUTR_V);
+
+	mmu_write(MMUDR, (pte_val(*pte) & PAGE_MASK) |
+		((pte->pte) & CF_PAGE_MMUDR_MASK) | MMUDR_SZ_8KB | MMUDR_X);
+
+	mmu_write(MMUOR, MMUOR_ACC | MMUOR_UAA);
+
+	goto end;
+
+bug:
+	pr_info("ksp load failed: mm=0x%p ksp=0x08%lx\n", mm, mmuar);
+end:
+	local_irq_restore(flags);
+}
+
+#elif defined(CONFIG_SUN3)
+#include <asm/sun3mmu.h>
+#include <linux/sched.h>
+
+extern unsigned long get_free_context(struct mm_struct *mm);
+extern void clear_context(unsigned long context);
+
+/* set the context for a new task to unmapped */
+static inline int init_new_context(struct task_struct *tsk,
+				   struct mm_struct *mm)
+{
+	mm->context = SUN3_INVALID_CONTEXT;
+	return 0;
+}
+
+/* find the context given to this process, and if it hasn't already
+   got one, go get one for it. */
+static inline void get_mmu_context(struct mm_struct *mm)
+{
+	if (mm->context == SUN3_INVALID_CONTEXT)
+		mm->context = get_free_context(mm);
+}
+
+/* flush context if allocated... */
+static inline void destroy_context(struct mm_struct *mm)
+{
+	if (mm->context != SUN3_INVALID_CONTEXT)
+		clear_context(mm->context);
+}
+
+static inline void activate_context(struct mm_struct *mm)
+{
+	get_mmu_context(mm);
+	sun3_put_context(mm->context);
+}
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+			     struct task_struct *tsk)
+{
+	activate_context(tsk->mm);
+}
+
+#define deactivate_mm(tsk, mm)	do { } while (0)
+
+static inline void activate_mm(struct mm_struct *prev_mm,
+			       struct mm_struct *next_mm)
+{
+	activate_context(next_mm);
+}
+
+#else
 
 #include <asm/setup.h>
 #include <asm/page.h>
@@ -103,55 +302,8 @@ static inline void activate_mm(struct mm_struct *prev_mm,
 		switch_mm_0460(next_mm);
 }
 
-#else  /* CONFIG_SUN3 */
-#include <asm/sun3mmu.h>
-#include <linux/sched.h>
-
-extern unsigned long get_free_context(struct mm_struct *mm);
-extern void clear_context(unsigned long context);
-
-/* set the context for a new task to unmapped */
-static inline int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
-{
-	mm->context = SUN3_INVALID_CONTEXT;
-	return 0;
-}
-
-/* find the context given to this process, and if it hasn't already
-   got one, go get one for it. */
-static inline void get_mmu_context(struct mm_struct *mm)
-{
-	if(mm->context == SUN3_INVALID_CONTEXT)
-		mm->context = get_free_context(mm);
-}
-
-/* flush context if allocated... */
-static inline void destroy_context(struct mm_struct *mm)
-{
-	if(mm->context != SUN3_INVALID_CONTEXT)
-		clear_context(mm->context);
-}
-
-static inline void activate_context(struct mm_struct *mm)
-{
-	get_mmu_context(mm);
-	sun3_put_context(mm->context);
-}
-
-static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk)
-{
-	activate_context(tsk->mm);
-}
-
-#define deactivate_mm(tsk,mm)	do { } while (0)
-
-static inline void activate_mm(struct mm_struct *prev_mm,
-			       struct mm_struct *next_mm)
-{
-	activate_context(next_mm);
-}
-
 #endif
+
 #else /* !CONFIG_MMU */
 
 static inline int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
diff --git a/arch/m68k/include/asm/motorola_pgtable.h b/arch/m68k/include/asm/motorola_pgtable.h
index 45bd3f5..e0fdd4d 100644
--- a/arch/m68k/include/asm/motorola_pgtable.h
+++ b/arch/m68k/include/asm/motorola_pgtable.h
@@ -8,6 +8,7 @@
 #define _PAGE_PRESENT	0x001
 #define _PAGE_SHORT	0x002
 #define _PAGE_RONLY	0x004
+#define _PAGE_READWRITE	0x000
 #define _PAGE_ACCESSED	0x008
 #define _PAGE_DIRTY	0x010
 #define _PAGE_SUPER	0x080	/* 68040 supervisor only */
diff --git a/arch/m68k/include/asm/page.h b/arch/m68k/include/asm/page.h
index dfebb7c..98baa82 100644
--- a/arch/m68k/include/asm/page.h
+++ b/arch/m68k/include/asm/page.h
@@ -6,10 +6,10 @@
 #include <asm/page_offset.h>
 
 /* PAGE_SHIFT determines the page size */
-#ifndef CONFIG_SUN3
-#define PAGE_SHIFT	(12)
+#if defined(CONFIG_SUN3) || defined(CONFIG_COLDFIRE)
+#define PAGE_SHIFT	13
 #else
-#define PAGE_SHIFT	(13)
+#define PAGE_SHIFT	12
 #endif
 #define PAGE_SIZE	(_AC(1, UL) << PAGE_SHIFT)
 #define PAGE_MASK	(~(PAGE_SIZE-1))
@@ -36,6 +36,10 @@ typedef struct page *pgtable_t;
 #define __pgd(x)	((pgd_t) { (x) } )
 #define __pgprot(x)	((pgprot_t) { (x) } )
 
+extern unsigned long _rambase;
+extern unsigned long _ramstart;
+extern unsigned long _ramend;
+
 #endif /* !__ASSEMBLY__ */
 
 #ifdef CONFIG_MMU
diff --git a/arch/m68k/include/asm/page_no.h b/arch/m68k/include/asm/page_no.h
index a8d1c60..9059572 100644
--- a/arch/m68k/include/asm/page_no.h
+++ b/arch/m68k/include/asm/page_no.h
@@ -5,9 +5,6 @@
  
 extern unsigned long memory_start;
 extern unsigned long memory_end;
-extern unsigned long _rambase;
-extern unsigned long _ramstart;
-extern unsigned long _ramend;
 
 #define get_user_page(vaddr)		__get_free_page(GFP_KERNEL)
 #define free_user_page(page, addr)	free_page(addr)
diff --git a/arch/m68k/include/asm/page_offset.h b/arch/m68k/include/asm/page_offset.h
index 1780152..82626a8 100644
--- a/arch/m68k/include/asm/page_offset.h
+++ b/arch/m68k/include/asm/page_offset.h
@@ -1,11 +1,9 @@
 /* This handles the memory map.. */
 
-#ifdef CONFIG_MMU
-#ifndef CONFIG_SUN3
-#define PAGE_OFFSET_RAW		0x00000000
-#else
+#if defined(CONFIG_RAMBASE)
+#define PAGE_OFFSET_RAW		CONFIG_RAMBASE
+#elif defined(CONFIG_SUN3)
 #define PAGE_OFFSET_RAW		0x0E000000
-#endif
 #else
-#define	PAGE_OFFSET_RAW		CONFIG_RAMBASE
+#define PAGE_OFFSET_RAW		0x00000000
 #endif
diff --git a/arch/m68k/include/asm/pgalloc.h b/arch/m68k/include/asm/pgalloc.h
index c294aad..37bee7e 100644
--- a/arch/m68k/include/asm/pgalloc.h
+++ b/arch/m68k/include/asm/pgalloc.h
@@ -7,7 +7,9 @@
 
 #ifdef CONFIG_MMU
 #include <asm/virtconvert.h>
-#ifdef CONFIG_SUN3
+#if defined(CONFIG_COLDFIRE)
+#include <asm/mcf_pgalloc.h>
+#elif defined(CONFIG_SUN3)
 #include <asm/sun3_pgalloc.h>
 #else
 #include <asm/motorola_pgalloc.h>
diff --git a/arch/m68k/include/asm/pgtable_mm.h b/arch/m68k/include/asm/pgtable_mm.h
index 87174c9..dc35e0e 100644
--- a/arch/m68k/include/asm/pgtable_mm.h
+++ b/arch/m68k/include/asm/pgtable_mm.h
@@ -40,6 +40,8 @@
 /* PGDIR_SHIFT determines what a third-level page table entry can map */
 #ifdef CONFIG_SUN3
 #define PGDIR_SHIFT     17
+#elif defined(CONFIG_COLDFIRE)
+#define PGDIR_SHIFT     22
 #else
 #define PGDIR_SHIFT	25
 #endif
@@ -54,6 +56,10 @@
 #define PTRS_PER_PTE   16
 #define PTRS_PER_PMD   1
 #define PTRS_PER_PGD   2048
+#elif defined(CONFIG_COLDFIRE)
+#define PTRS_PER_PTE	512
+#define PTRS_PER_PMD	1
+#define PTRS_PER_PGD	1024
 #else
 #define PTRS_PER_PTE	1024
 #define PTRS_PER_PMD	8
@@ -66,12 +72,22 @@
 #ifdef CONFIG_SUN3
 #define KMAP_START     0x0DC00000
 #define KMAP_END       0x0E000000
+#elif defined(CONFIG_COLDFIRE)
+#define KMAP_START	0xe0000000
+#define KMAP_END	0xf0000000
 #else
 #define	KMAP_START	0xd0000000
 #define	KMAP_END	0xf0000000
 #endif
 
-#ifndef CONFIG_SUN3
+#ifdef CONFIG_SUN3
+extern unsigned long m68k_vmalloc_end;
+#define VMALLOC_START 0x0f800000
+#define VMALLOC_END m68k_vmalloc_end
+#elif defined(CONFIG_COLDFIRE)
+#define VMALLOC_START	0xd0000000
+#define VMALLOC_END	0xe0000000
+#else
 /* Just any arbitrary offset to the start of the vmalloc VM area: the
  * current 8MB value just means that there will be a 8MB "hole" after the
  * physical memory until the kernel virtual memory starts.  That means that
@@ -82,11 +98,7 @@
 #define VMALLOC_OFFSET	(8*1024*1024)
 #define VMALLOC_START (((unsigned long) high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
 #define VMALLOC_END KMAP_START
-#else
-extern unsigned long m68k_vmalloc_end;
-#define VMALLOC_START 0x0f800000
-#define VMALLOC_END m68k_vmalloc_end
-#endif /* CONFIG_SUN3 */
+#endif
 
 /* zero page used for uninitialized stuff */
 extern void *empty_zero_page;
@@ -130,6 +142,8 @@ static inline void update_mmu_cache(struct vm_area_struct *vma,
 
 #ifdef CONFIG_SUN3
 #include <asm/sun3_pgtable.h>
+#elif defined(CONFIG_COLDFIRE)
+#include <asm/mcf_pgtable.h>
 #else
 #include <asm/motorola_pgtable.h>
 #endif
@@ -138,6 +152,9 @@ static inline void update_mmu_cache(struct vm_area_struct *vma,
 /*
  * Macro to mark a page protection value as "uncacheable".
  */
+#ifdef CONFIG_COLDFIRE
+# define pgprot_noncached(prot) (__pgprot(pgprot_val(prot) | CF_PAGE_NOCACHE))
+#else
 #ifdef SUN3_PAGE_NOCACHE
 # define __SUN3_PAGE_NOCACHE	SUN3_PAGE_NOCACHE
 #else
@@ -152,6 +169,7 @@ static inline void update_mmu_cache(struct vm_area_struct *vma,
 	    ? (__pgprot((pgprot_val(prot) & _CACHEMASK040) | _PAGE_NOCACHE_S))	\
 	    : (prot)))
 
+#endif /* CONFIG_COLDFIRE */
 #include <asm-generic/pgtable.h>
 #endif /* !__ASSEMBLY__ */
 
diff --git a/arch/m68k/include/asm/processor.h b/arch/m68k/include/asm/processor.h
index 568facf..46460fa 100644
--- a/arch/m68k/include/asm/processor.h
+++ b/arch/m68k/include/asm/processor.h
@@ -48,10 +48,12 @@ static inline void wrusp(unsigned long usp)
  * so don't change it unless you know what you are doing.
  */
 #ifdef CONFIG_MMU
-#ifndef CONFIG_SUN3
-#define TASK_SIZE	(0xF0000000UL)
-#else
+#if defined(CONFIG_COLDFIRE)
+#define TASK_SIZE	(0xC0000000UL)
+#elif defined(CONFIG_SUN3)
 #define TASK_SIZE	(0x0E000000UL)
+#else
+#define TASK_SIZE	(0xF0000000UL)
 #endif
 #else
 #define TASK_SIZE	(0xFFFFFFFFUL)
@@ -66,10 +68,12 @@ static inline void wrusp(unsigned long usp)
  * space during mmap's.
  */
 #ifdef CONFIG_MMU
-#ifndef CONFIG_SUN3
-#define TASK_UNMAPPED_BASE	0xC0000000UL
-#else
+#if defined(CONFIG_COLDFIRE)
+#define TASK_UNMAPPED_BASE	0x60000000UL
+#elif defined(CONFIG_SUN3)
 #define TASK_UNMAPPED_BASE	0x0A000000UL
+#else
+#define TASK_UNMAPPED_BASE	0xC0000000UL
 #endif
 #define TASK_UNMAPPED_ALIGN(addr, off)	PAGE_ALIGN(addr)
 #else
@@ -88,14 +92,12 @@ struct thread_struct {
 	unsigned long  fp[8*3];
 	unsigned long  fpcntl[3];	/* fp control regs */
 	unsigned char  fpstate[FPSTATESIZE];  /* floating point state */
-	struct thread_info info;
 };
 
 #define INIT_THREAD  {							\
 	.ksp	= sizeof(init_stack) + (unsigned long) init_stack,	\
 	.sr	= PS_S,							\
 	.fs	= __KERNEL_DS,						\
-	.info	= INIT_THREAD_INFO(init_task),				\
 }
 
 #ifdef CONFIG_MMU
diff --git a/arch/m68k/include/asm/segment.h b/arch/m68k/include/asm/segment.h
index ee95921..0fa80e9 100644
--- a/arch/m68k/include/asm/segment.h
+++ b/arch/m68k/include/asm/segment.h
@@ -22,23 +22,26 @@ typedef struct {
 } mm_segment_t;
 
 #define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
-#define USER_DS		MAKE_MM_SEG(__USER_DS)
-#define KERNEL_DS	MAKE_MM_SEG(__KERNEL_DS)
 
+#ifdef CONFIG_CPU_HAS_ADDRESS_SPACES
 /*
  * Get/set the SFC/DFC registers for MOVES instructions
  */
+#define USER_DS		MAKE_MM_SEG(__USER_DS)
+#define KERNEL_DS	MAKE_MM_SEG(__KERNEL_DS)
 
 static inline mm_segment_t get_fs(void)
 {
-#ifdef CONFIG_MMU
 	mm_segment_t _v;
 	__asm__ ("movec %/dfc,%0":"=r" (_v.seg):);
-
 	return _v;
-#else
-	return USER_DS;
-#endif
+}
+
+static inline void set_fs(mm_segment_t val)
+{
+	__asm__ __volatile__ ("movec %0,%/sfc\n\t"
+			      "movec %0,%/dfc\n\t"
+			      : /* no outputs */ : "r" (val.seg) : "memory");
 }
 
 static inline mm_segment_t get_ds(void)
@@ -47,14 +50,13 @@ static inline mm_segment_t get_ds(void)
     return KERNEL_DS;
 }
 
-static inline void set_fs(mm_segment_t val)
-{
-#ifdef CONFIG_MMU
-	__asm__ __volatile__ ("movec %0,%/sfc\n\t"
-			      "movec %0,%/dfc\n\t"
-			      : /* no outputs */ : "r" (val.seg) : "memory");
+#else
+#define USER_DS		MAKE_MM_SEG(TASK_SIZE)
+#define KERNEL_DS	MAKE_MM_SEG(0xFFFFFFFF)
+#define get_ds()	(KERNEL_DS)
+#define get_fs()	(current_thread_info()->addr_limit)
+#define set_fs(x)	(current_thread_info()->addr_limit = (x))
 #endif
-}
 
 #define segment_eq(a,b)	((a).seg == (b).seg)
 
diff --git a/arch/m68k/include/asm/serial.h b/arch/m68k/include/asm/serial.h
index 2b90d6e..7267536 100644
--- a/arch/m68k/include/asm/serial.h
+++ b/arch/m68k/include/asm/serial.h
@@ -25,9 +25,11 @@
 #define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
 #endif
 
+#ifdef CONFIG_ISA
 #define SERIAL_PORT_DFNS			\
 	/* UART CLK   PORT IRQ     FLAGS        */			\
 	{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS },	/* ttyS0 */	\
 	{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS },	/* ttyS1 */	\
 	{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS },	/* ttyS2 */	\
 	{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS },	/* ttyS3 */
+#endif
diff --git a/arch/m68k/include/asm/setup.h b/arch/m68k/include/asm/setup.h
index 4dfb395..00c2c53 100644
--- a/arch/m68k/include/asm/setup.h
+++ b/arch/m68k/include/asm/setup.h
@@ -40,6 +40,7 @@
 #define MACH_HP300    9
 #define MACH_Q40     10
 #define MACH_SUN3X   11
+#define MACH_M54XX   12
 
 #define COMMAND_LINE_SIZE 256
 
@@ -211,23 +212,27 @@ extern unsigned long m68k_machtype;
 #define CPUB_68030     1
 #define CPUB_68040     2
 #define CPUB_68060     3
+#define CPUB_COLDFIRE  4
 
 #define CPU_68020      (1<<CPUB_68020)
 #define CPU_68030      (1<<CPUB_68030)
 #define CPU_68040      (1<<CPUB_68040)
 #define CPU_68060      (1<<CPUB_68060)
+#define CPU_COLDFIRE   (1<<CPUB_COLDFIRE)
 
 #define FPUB_68881     0
 #define FPUB_68882     1
 #define FPUB_68040     2                       /* Internal FPU */
 #define FPUB_68060     3                       /* Internal FPU */
 #define FPUB_SUNFPA    4                       /* Sun-3 FPA */
+#define FPUB_COLDFIRE  5                       /* ColdFire FPU */
 
 #define FPU_68881      (1<<FPUB_68881)
 #define FPU_68882      (1<<FPUB_68882)
 #define FPU_68040      (1<<FPUB_68040)
 #define FPU_68060      (1<<FPUB_68060)
 #define FPU_SUNFPA     (1<<FPUB_SUNFPA)
+#define FPU_COLDFIRE   (1<<FPUB_COLDFIRE)
 
 #define MMUB_68851     0
 #define MMUB_68030     1                       /* Internal MMU */
@@ -235,6 +240,7 @@ extern unsigned long m68k_machtype;
 #define MMUB_68060     3                       /* Internal MMU */
 #define MMUB_APOLLO    4                       /* Custom Apollo */
 #define MMUB_SUN3      5                       /* Custom Sun-3 */
+#define MMUB_COLDFIRE  6                       /* Internal MMU */
 
 #define MMU_68851      (1<<MMUB_68851)
 #define MMU_68030      (1<<MMUB_68030)
@@ -242,6 +248,7 @@ extern unsigned long m68k_machtype;
 #define MMU_68060      (1<<MMUB_68060)
 #define MMU_SUN3       (1<<MMUB_SUN3)
 #define MMU_APOLLO     (1<<MMUB_APOLLO)
+#define MMU_COLDFIRE   (1<<MMUB_COLDFIRE)
 
 #ifdef __KERNEL__
 
@@ -341,6 +348,13 @@ extern int m68k_is040or060;
 #  endif
 #endif
 
+#if !defined(CONFIG_COLDFIRE)
+#  define CPU_IS_COLDFIRE (0)
+#else
+#  define CPU_IS_COLDFIRE (1)
+#  define MMU_IS_COLDFIRE (1)
+#endif
+
 #define CPU_TYPE (m68k_cputype)
 
 #ifdef CONFIG_M68KFPU_EMU
diff --git a/arch/m68k/include/asm/sigcontext.h b/arch/m68k/include/asm/sigcontext.h
index a29dd74..523db2a 100644
--- a/arch/m68k/include/asm/sigcontext.h
+++ b/arch/m68k/include/asm/sigcontext.h
@@ -15,11 +15,7 @@ struct sigcontext {
 	unsigned long  sc_pc;
 	unsigned short sc_formatvec;
 #ifndef __uClinux__
-# ifdef __mcoldfire__
-	unsigned long  sc_fpregs[2][2];	/* room for two fp registers */
-# else
 	unsigned long  sc_fpregs[2*3];  /* room for two fp registers */
-# endif
 	unsigned long  sc_fpcntl[3];
 	unsigned char  sc_fpstate[216];
 #endif
diff --git a/arch/m68k/include/asm/socket.h b/arch/m68k/include/asm/socket.h
index 9bf49c8..d4708ce 100644
--- a/arch/m68k/include/asm/socket.h
+++ b/arch/m68k/include/asm/socket.h
@@ -62,4 +62,7 @@
 
 #define SO_RXQ_OVFL             40
 
+#define SO_WIFI_STATUS		41
+#define SCM_WIFI_STATUS		SO_WIFI_STATUS
+
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/m68k/include/asm/thread_info.h b/arch/m68k/include/asm/thread_info.h
index 7909889..e8665e6 100644
--- a/arch/m68k/include/asm/thread_info.h
+++ b/arch/m68k/include/asm/thread_info.h
@@ -3,6 +3,7 @@
 
 #include <asm/types.h>
 #include <asm/page.h>
+#include <asm/segment.h>
 
 /*
  * On machines with 4k pages we default to an 8k thread size, though we
@@ -26,6 +27,7 @@ struct thread_info {
 	struct task_struct	*task;		/* main task structure */
 	unsigned long		flags;
 	struct exec_domain	*exec_domain;	/* execution domain */
+	mm_segment_t		addr_limit;	/* thread address space */
 	int			preempt_count;	/* 0 => preemptable, <0 => BUG */
 	__u32			cpu;		/* should always be 0 on m68k */
 	unsigned long		tp_value;	/* thread pointer */
@@ -39,6 +41,7 @@ struct thread_info {
 {						\
 	.task		= &tsk,			\
 	.exec_domain	= &default_exec_domain,	\
+	.addr_limit	= KERNEL_DS,		\
 	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.restart_block = {			\
 		.fn = do_no_restart_syscall,	\
@@ -47,34 +50,6 @@ struct thread_info {
 
 #define init_stack		(init_thread_union.stack)
 
-#ifdef CONFIG_MMU
-
-#ifndef __ASSEMBLY__
-#include <asm/current.h>
-#endif
-
-#ifdef ASM_OFFSETS_C
-#define task_thread_info(tsk)	((struct thread_info *) NULL)
-#else
-#include <asm/asm-offsets.h>
-#define task_thread_info(tsk)	((struct thread_info *)((char *)tsk+TASK_TINFO))
-#endif
-
-#define init_thread_info	(init_task.thread.info)
-#define task_stack_page(tsk)	((tsk)->stack)
-#define current_thread_info()	task_thread_info(current)
-
-#define __HAVE_THREAD_FUNCTIONS
-
-#define setup_thread_stack(p, org) ({			\
-	*(struct task_struct **)(p)->stack = (p);	\
-	task_thread_info(p)->task = (p);		\
-})
-
-#define end_of_stack(p)		((unsigned long *)(p)->stack + 1)
-
-#else /* !CONFIG_MMU */
-
 #ifndef __ASSEMBLY__
 /* how to get the thread information struct from C */
 static inline struct thread_info *current_thread_info(void)
@@ -92,8 +67,6 @@ static inline struct thread_info *current_thread_info(void)
 
 #define init_thread_info	(init_thread_union.thread_info)
 
-#endif /* CONFIG_MMU */
-
 /* entry.S relies on these definitions!
  * bits 0-7 are tested at every exception exit
  * bits 8-15 are also tested at syscall exit
@@ -103,7 +76,6 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_DELAYED_TRACE	14	/* single step a syscall */
 #define TIF_SYSCALL_TRACE	15	/* syscall trace active */
 #define TIF_MEMDIE		16	/* is terminating due to OOM killer */
-#define TIF_FREEZE		17	/* thread is freezing for suspend */
 #define TIF_RESTORE_SIGMASK	18	/* restore signal mask in do_signal */
 
 #endif	/* _ASM_M68K_THREAD_INFO_H */
diff --git a/arch/m68k/include/asm/tlbflush.h b/arch/m68k/include/asm/tlbflush.h
index a6b4ed4..965ea35 100644
--- a/arch/m68k/include/asm/tlbflush.h
+++ b/arch/m68k/include/asm/tlbflush.h
@@ -5,10 +5,13 @@
 #ifndef CONFIG_SUN3
 
 #include <asm/current.h>
+#include <asm/mcfmmu.h>
 
 static inline void flush_tlb_kernel_page(void *addr)
 {
-	if (CPU_IS_040_OR_060) {
+	if (CPU_IS_COLDFIRE) {
+		mmu_write(MMUOR, MMUOR_CNL);
+	} else if (CPU_IS_040_OR_060) {
 		mm_segment_t old_fs = get_fs();
 		set_fs(KERNEL_DS);
 		__asm__ __volatile__(".chip 68040\n\t"
@@ -25,12 +28,15 @@ static inline void flush_tlb_kernel_page(void *addr)
  */
 static inline void __flush_tlb(void)
 {
-	if (CPU_IS_040_OR_060)
+	if (CPU_IS_COLDFIRE) {
+		mmu_write(MMUOR, MMUOR_CNL);
+	} else if (CPU_IS_040_OR_060) {
 		__asm__ __volatile__(".chip 68040\n\t"
 				     "pflushan\n\t"
 				     ".chip 68k");
-	else if (CPU_IS_020_OR_030)
+	} else if (CPU_IS_020_OR_030) {
 		__asm__ __volatile__("pflush #0,#4");
+	}
 }
 
 static inline void __flush_tlb040_one(unsigned long addr)
@@ -43,7 +49,9 @@ static inline void __flush_tlb040_one(unsigned long addr)
 
 static inline void __flush_tlb_one(unsigned long addr)
 {
-	if (CPU_IS_040_OR_060)
+	if (CPU_IS_COLDFIRE)
+		mmu_write(MMUOR, MMUOR_CNL);
+	else if (CPU_IS_040_OR_060)
 		__flush_tlb040_one(addr);
 	else if (CPU_IS_020_OR_030)
 		__asm__ __volatile__("pflush #0,#4,(%0)" : : "a" (addr));
@@ -56,12 +64,15 @@ static inline void __flush_tlb_one(unsigned long addr)
  */
 static inline void flush_tlb_all(void)
 {
-	if (CPU_IS_040_OR_060)
+	if (CPU_IS_COLDFIRE) {
+		mmu_write(MMUOR, MMUOR_CNL);
+	} else if (CPU_IS_040_OR_060) {
 		__asm__ __volatile__(".chip 68040\n\t"
 				     "pflusha\n\t"
 				     ".chip 68k");
-	else if (CPU_IS_020_OR_030)
+	} else if (CPU_IS_020_OR_030) {
 		__asm__ __volatile__("pflusha");
+	}
 }
 
 static inline void flush_tlb_mm(struct mm_struct *mm)
diff --git a/arch/m68k/include/asm/traps.h b/arch/m68k/include/asm/traps.h
index 151068f..4aff335 100644
--- a/arch/m68k/include/asm/traps.h
+++ b/arch/m68k/include/asm/traps.h
@@ -18,6 +18,7 @@
 
 typedef void (*e_vector)(void);
 extern e_vector vectors[];
+extern e_vector *_ramvec;
 
 asmlinkage void auto_inthandler(void);
 asmlinkage void user_inthandler(void);
diff --git a/arch/m68k/include/asm/types.h b/arch/m68k/include/asm/types.h
index b17fd11..89705ad 100644
--- a/arch/m68k/include/asm/types.h
+++ b/arch/m68k/include/asm/types.h
@@ -10,12 +10,6 @@
  */
 #include <asm-generic/int-ll64.h>
 
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-#endif /* __ASSEMBLY__ */
-
 /*
  * These aren't exported outside the kernel to avoid name space clashes
  */
diff --git a/arch/m68k/include/asm/uaccess_mm.h b/arch/m68k/include/asm/uaccess_mm.h
index 7107f3fb..9c80cd5 100644
--- a/arch/m68k/include/asm/uaccess_mm.h
+++ b/arch/m68k/include/asm/uaccess_mm.h
@@ -21,6 +21,22 @@ static inline int access_ok(int type, const void __user *addr,
 }
 
 /*
+ * Not all varients of the 68k family support the notion of address spaces.
+ * The traditional 680x0 parts do, and they use the sfc/dfc registers and
+ * the "moves" instruction to access user space from kernel space. Other
+ * family members like ColdFire don't support this, and only have a single
+ * address space, and use the usual "move" instruction for user space access.
+ *
+ * Outside of this difference the user space access functions are the same.
+ * So lets keep the code simple and just define in what we need to use.
+ */
+#ifdef CONFIG_CPU_HAS_ADDRESS_SPACES
+#define	MOVES	"moves"
+#else
+#define	MOVES	"move"
+#endif
+
+/*
  * The exception table consists of pairs of addresses: the first is the
  * address of an instruction that is allowed to fault, and the second is
  * the address at which the program should continue.  No registers are
@@ -43,7 +59,7 @@ extern int __get_user_bad(void);
 
 #define __put_user_asm(res, x, ptr, bwl, reg, err)	\
 asm volatile ("\n"					\
-	"1:	moves."#bwl"	%2,%1\n"		\
+	"1:	"MOVES"."#bwl"	%2,%1\n"		\
 	"2:\n"						\
 	"	.section .fixup,\"ax\"\n"		\
 	"	.even\n"				\
@@ -83,8 +99,8 @@ asm volatile ("\n"					\
  	    {								\
  		const void __user *__pu_ptr = (ptr);			\
 		asm volatile ("\n"					\
-			"1:	moves.l	%2,(%1)+\n"			\
-			"2:	moves.l	%R2,(%1)\n"			\
+			"1:	"MOVES".l	%2,(%1)+\n"		\
+			"2:	"MOVES".l	%R2,(%1)\n"		\
 			"3:\n"						\
 			"	.section .fixup,\"ax\"\n"		\
 			"	.even\n"				\
@@ -115,12 +131,12 @@ asm volatile ("\n"					\
 #define __get_user_asm(res, x, ptr, type, bwl, reg, err) ({	\
 	type __gu_val;						\
 	asm volatile ("\n"					\
-		"1:	moves."#bwl"	%2,%1\n"		\
+		"1:	"MOVES"."#bwl"	%2,%1\n"		\
 		"2:\n"						\
 		"	.section .fixup,\"ax\"\n"		\
 		"	.even\n"				\
 		"10:	move.l	%3,%0\n"			\
-		"	sub."#bwl"	%1,%1\n"		\
+		"	sub.l	%1,%1\n"			\
 		"	jra	2b\n"				\
 		"	.previous\n"				\
 		"\n"						\
@@ -152,8 +168,8 @@ asm volatile ("\n"					\
  		const void *__gu_ptr = (ptr);				\
  		u64 __gu_val;						\
 		asm volatile ("\n"					\
-			"1:	moves.l	(%2)+,%1\n"			\
-			"2:	moves.l	(%2),%R1\n"			\
+			"1:	"MOVES".l	(%2)+,%1\n"		\
+			"2:	"MOVES".l	(%2),%R1\n"		\
 			"3:\n"						\
 			"	.section .fixup,\"ax\"\n"		\
 			"	.even\n"				\
@@ -188,12 +204,12 @@ unsigned long __generic_copy_to_user(void __user *to, const void *from, unsigned
 
 #define __constant_copy_from_user_asm(res, to, from, tmp, n, s1, s2, s3)\
 	asm volatile ("\n"						\
-		"1:	moves."#s1"	(%2)+,%3\n"			\
+		"1:	"MOVES"."#s1"	(%2)+,%3\n"			\
 		"	move."#s1"	%3,(%1)+\n"			\
-		"2:	moves."#s2"	(%2)+,%3\n"			\
+		"2:	"MOVES"."#s2"	(%2)+,%3\n"			\
 		"	move."#s2"	%3,(%1)+\n"			\
 		"	.ifnc	\""#s3"\",\"\"\n"			\
-		"3:	moves."#s3"	(%2)+,%3\n"			\
+		"3:	"MOVES"."#s3"	(%2)+,%3\n"			\
 		"	move."#s3"	%3,(%1)+\n"			\
 		"	.endif\n"					\
 		"4:\n"							\
@@ -269,13 +285,13 @@ __constant_copy_from_user(void *to, const void __user *from, unsigned long n)
 #define __constant_copy_to_user_asm(res, to, from, tmp, n, s1, s2, s3)	\
 	asm volatile ("\n"						\
 		"	move."#s1"	(%2)+,%3\n"			\
-		"11:	moves."#s1"	%3,(%1)+\n"			\
+		"11:	"MOVES"."#s1"	%3,(%1)+\n"			\
 		"12:	move."#s2"	(%2)+,%3\n"			\
-		"21:	moves."#s2"	%3,(%1)+\n"			\
+		"21:	"MOVES"."#s2"	%3,(%1)+\n"			\
 		"22:\n"							\
 		"	.ifnc	\""#s3"\",\"\"\n"			\
 		"	move."#s3"	(%2)+,%3\n"			\
-		"31:	moves."#s3"	%3,(%1)+\n"			\
+		"31:	"MOVES"."#s3"	%3,(%1)+\n"			\
 		"32:\n"							\
 		"	.endif\n"					\
 		"4:\n"							\
diff --git a/arch/m68k/include/asm/ucontext.h b/arch/m68k/include/asm/ucontext.h
index 00dcc51..e4e2266 100644
--- a/arch/m68k/include/asm/ucontext.h
+++ b/arch/m68k/include/asm/ucontext.h
@@ -7,11 +7,7 @@ typedef greg_t gregset_t[NGREG];
 
 typedef struct fpregset {
 	int f_fpcntl[3];
-#ifdef __mcoldfire__
-	int f_fpregs[8][2];
-#else
 	int f_fpregs[8*3];
-#endif
 } fpregset_t;
 
 struct mcontext {
diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h
index 43f984e..ea0b502 100644
--- a/arch/m68k/include/asm/unistd.h
+++ b/arch/m68k/include/asm/unistd.h
@@ -132,10 +132,10 @@
 #define __NR_adjtimex		124
 #define __NR_mprotect		125
 #define __NR_sigprocmask	126
-/*#define __NR_create_module	127*/
+#define __NR_create_module	127
 #define __NR_init_module	128
 #define __NR_delete_module	129
-/*#define __NR_get_kernel_syms	130*/
+#define __NR_get_kernel_syms	130
 #define __NR_quotactl		131
 #define __NR_getpgid		132
 #define __NR_fchdir		133
@@ -172,7 +172,7 @@
 #define __NR_setresuid		164
 #define __NR_getresuid		165
 #define __NR_getpagesize	166
-/*#define __NR_query_module	167*/
+#define __NR_query_module	167
 #define __NR_poll		168
 #define __NR_nfsservctl		169
 #define __NR_setresgid		170
@@ -193,8 +193,8 @@
 #define __NR_capset		185
 #define __NR_sigaltstack	186
 #define __NR_sendfile		187
-/*#define __NR_getpmsg		188*/	/* some people actually want streams */
-/*#define __NR_putpmsg		189*/	/* some people actually want streams */
+#define __NR_getpmsg		188	/* some people actually want streams */
+#define __NR_putpmsg		189	/* some people actually want streams */
 #define __NR_vfork		190
 #define __NR_ugetrlimit		191
 #define __NR_mmap2		192
@@ -350,10 +350,12 @@
 #define __NR_clock_adjtime	342
 #define __NR_syncfs		343
 #define __NR_setns		344
+#define __NR_process_vm_readv	345
+#define __NR_process_vm_writev	346
 
 #ifdef __KERNEL__
 
-#define NR_syscalls		345
+#define NR_syscalls		347
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 #define __ARCH_WANT_OLD_READDIR
diff --git a/arch/m68k/kernel/Makefile b/arch/m68k/kernel/Makefile
index c569619..40d29a78 100644
--- a/arch/m68k/kernel/Makefile
+++ b/arch/m68k/kernel/Makefile
@@ -2,19 +2,24 @@
 # Makefile for the linux kernel.
 #
 
-extra-$(CONFIG_MMU)	:= head.o
+extra-$(CONFIG_AMIGA)	:= head.o
+extra-$(CONFIG_ATARI)	:= head.o
+extra-$(CONFIG_MAC)	:= head.o
+extra-$(CONFIG_APOLLO)	:= head.o
+extra-$(CONFIG_VME)	:= head.o
+extra-$(CONFIG_HP300)	:= head.o
+extra-$(CONFIG_Q40)	:= head.o
+extra-$(CONFIG_SUN3X)	:= head.o
 extra-$(CONFIG_SUN3)	:= sun3-head.o
 extra-y			+= vmlinux.lds
 
-obj-y	:= entry.o irq.o m68k_ksyms.o module.o process.o ptrace.o setup.o \
-	   signal.o sys_m68k.o syscalltable.o time.o traps.o
+obj-y	:= entry.o init_task.o irq.o m68k_ksyms.o module.o process.o ptrace.o
+obj-y	+= setup.o signal.o sys_m68k.o syscalltable.o time.o traps.o
 
-obj-$(CONFIG_MMU)	+= ints.o vectors.o
+obj-$(CONFIG_MMU_MOTOROLA) += ints.o vectors.o
+obj-$(CONFIG_MMU_SUN3) += ints.o vectors.o
 
 ifndef CONFIG_MMU_SUN3
-obj-y			+= dma.o
-endif
-ifndef CONFIG_MMU
-obj-y			+= init_task.o
+obj-y	+= dma.o
 endif
 
diff --git a/arch/m68k/kernel/asm-offsets.c b/arch/m68k/kernel/asm-offsets.c
index 983fed9..a972b00 100644
--- a/arch/m68k/kernel/asm-offsets.c
+++ b/arch/m68k/kernel/asm-offsets.c
@@ -24,8 +24,7 @@ int main(void)
 	/* offsets into the task struct */
 	DEFINE(TASK_THREAD, offsetof(struct task_struct, thread));
 	DEFINE(TASK_MM, offsetof(struct task_struct, mm));
-	DEFINE(TASK_INFO, offsetof(struct task_struct, thread.info));
-	DEFINE(TASK_TINFO, offsetof(struct task_struct, thread.info));
+	DEFINE(TASK_STACK, offsetof(struct task_struct, stack));
 
 	/* offsets into the thread struct */
 	DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp));
diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S
index 081cf96..b8daf64 100644
--- a/arch/m68k/kernel/entry.S
+++ b/arch/m68k/kernel/entry.S
@@ -1,4 +1,4 @@
-#ifdef CONFIG_MMU
+#if defined(CONFIG_MMU) && !defined(CONFIG_COLDFIRE)
 #include "entry_mm.S"
 #else
 #include "entry_no.S"
diff --git a/arch/m68k/kernel/entry_mm.S b/arch/m68k/kernel/entry_mm.S
index c713f51..675a854 100644
--- a/arch/m68k/kernel/entry_mm.S
+++ b/arch/m68k/kernel/entry_mm.S
@@ -99,7 +99,8 @@ do_trace_exit:
 	jra	.Lret_from_exception
 
 ENTRY(ret_from_signal)
-	tstb	%curptr@(TASK_INFO+TINFO_FLAGS+2)
+	movel	%curptr@(TASK_STACK),%a1
+	tstb	%a1@(TINFO_FLAGS+2)
 	jge	1f
 	jbsr	syscall_trace
 1:	RESTORE_SWITCH_STACK
@@ -120,11 +121,13 @@ ENTRY(system_call)
 	SAVE_ALL_SYS
 
 	GET_CURRENT(%d1)
+	movel	%d1,%a1
+
 	| save top of frame
 	movel	%sp,%curptr@(TASK_THREAD+THREAD_ESP0)
 
 	| syscall trace?
-	tstb	%curptr@(TASK_INFO+TINFO_FLAGS+2)
+	tstb	%a1@(TINFO_FLAGS+2)
 	jmi	do_trace_entry
 	cmpl	#NR_syscalls,%d0
 	jcc	badsys
@@ -133,7 +136,8 @@ syscall:
 	movel	%d0,%sp@(PT_OFF_D0)	| save the return value
 ret_from_syscall:
 	|oriw	#0x0700,%sr
-	movew	%curptr@(TASK_INFO+TINFO_FLAGS+2),%d0
+	movel	%curptr@(TASK_STACK),%a1
+	movew	%a1@(TINFO_FLAGS+2),%d0
 	jne	syscall_exit_work
 1:	RESTORE_ALL
 
@@ -159,7 +163,8 @@ ENTRY(ret_from_exception)
 	andw	#ALLOWINT,%sr
 
 resume_userspace:
-	moveb	%curptr@(TASK_INFO+TINFO_FLAGS+3),%d0
+	movel	%curptr@(TASK_STACK),%a1
+	moveb	%a1@(TINFO_FLAGS+3),%d0
 	jne	exit_work
 1:	RESTORE_ALL
 
@@ -199,7 +204,8 @@ do_delayed_trace:
 ENTRY(auto_inthandler)
 	SAVE_ALL_INT
 	GET_CURRENT(%d0)
-	addqb	#1,%curptr@(TASK_INFO+TINFO_PREEMPT+1)
+	movel	%d0,%a1
+	addqb	#1,%a1@(TINFO_PREEMPT+1)
 					|  put exception # in d0
 	bfextu	%sp@(PT_OFF_FORMATVEC){#4,#10},%d0
 	subw	#VEC_SPUR,%d0
@@ -211,7 +217,8 @@ auto_irqhandler_fixup = . + 2
 	addql	#8,%sp			|  pop parameters off stack
 
 ret_from_interrupt:
-	subqb	#1,%curptr@(TASK_INFO+TINFO_PREEMPT+1)
+	movel	%curptr@(TASK_STACK),%a1
+	subqb	#1,%a1@(TINFO_PREEMPT+1)
 	jeq	ret_from_last_interrupt
 2:	RESTORE_ALL
 
@@ -232,7 +239,8 @@ ret_from_last_interrupt:
 ENTRY(user_inthandler)
 	SAVE_ALL_INT
 	GET_CURRENT(%d0)
-	addqb	#1,%curptr@(TASK_INFO+TINFO_PREEMPT+1)
+	movel	%d0,%a1
+	addqb	#1,%a1@(TINFO_PREEMPT+1)
 					|  put exception # in d0
 	bfextu	%sp@(PT_OFF_FORMATVEC){#4,#10},%d0
 user_irqvec_fixup = . + 2
@@ -243,7 +251,8 @@ user_irqvec_fixup = . + 2
 	jsr	do_IRQ			|  process the IRQ
 	addql	#8,%sp			|  pop parameters off stack
 
-	subqb	#1,%curptr@(TASK_INFO+TINFO_PREEMPT+1)
+	movel	%curptr@(TASK_STACK),%a1
+	subqb	#1,%a1@(TINFO_PREEMPT+1)
 	jeq	ret_from_last_interrupt
 	RESTORE_ALL
 
@@ -252,13 +261,15 @@ user_irqvec_fixup = . + 2
 ENTRY(bad_inthandler)
 	SAVE_ALL_INT
 	GET_CURRENT(%d0)
-	addqb	#1,%curptr@(TASK_INFO+TINFO_PREEMPT+1)
+	movel	%d0,%a1
+	addqb	#1,%a1@(TINFO_PREEMPT+1)
 
 	movel	%sp,%sp@-
 	jsr	handle_badint
 	addql	#4,%sp
 
-	subqb	#1,%curptr@(TASK_INFO+TINFO_PREEMPT+1)
+	movel	%curptr@(TASK_STACK),%a1
+	subqb	#1,%a1@(TINFO_PREEMPT+1)
 	jeq	ret_from_last_interrupt
 	RESTORE_ALL
 
diff --git a/arch/m68k/kernel/entry_no.S b/arch/m68k/kernel/entry_no.S
index 1b42890..d80cba4 100644
--- a/arch/m68k/kernel/entry_no.S
+++ b/arch/m68k/kernel/entry_no.S
@@ -44,8 +44,7 @@
 
 ENTRY(buserr)
 	SAVE_ALL_INT
-	moveq	#-1,%d0
-	movel	%d0,%sp@(PT_OFF_ORIG_D0)
+	GET_CURRENT(%d0)
 	movel	%sp,%sp@- 		/* stack frame pointer argument */
 	jsr	buserr_c
 	addql	#4,%sp
@@ -53,8 +52,7 @@ ENTRY(buserr)
 
 ENTRY(trap)
 	SAVE_ALL_INT
-	moveq	#-1,%d0
-	movel	%d0,%sp@(PT_OFF_ORIG_D0)
+	GET_CURRENT(%d0)
 	movel	%sp,%sp@- 		/* stack frame pointer argument */
 	jsr	trap_c
 	addql	#4,%sp
@@ -65,8 +63,7 @@ ENTRY(trap)
 .globl dbginterrupt
 ENTRY(dbginterrupt)
 	SAVE_ALL_INT
-	moveq	#-1,%d0
-	movel	%d0,%sp@(PT_OFF_ORIG_D0)
+	GET_CURRENT(%d0)
 	movel	%sp,%sp@- 		/* stack frame pointer argument */
 	jsr	dbginterrupt_c
 	addql	#4,%sp
diff --git a/arch/m68k/kernel/head.S b/arch/m68k/kernel/head.S
index 27622b3..d197e7f 100644
--- a/arch/m68k/kernel/head.S
+++ b/arch/m68k/kernel/head.S
@@ -250,9 +250,8 @@
  * USE_MFP:	Use the ST-MFP port (Modem1) for serial debug.
  *
  * Macintosh constants:
- * MAC_SERIAL_DEBUG:	Turns on serial debug output for the Macintosh.
- * MAC_USE_SCC_A:	Use the SCC port A (modem) for serial debug.
- * MAC_USE_SCC_B:	Use the SCC port B (printer) for serial debug (default).
+ * MAC_USE_SCC_A: Use SCC port A (modem) for serial debug and early console.
+ * MAC_USE_SCC_B: Use SCC port B (printer) for serial debug and early console.
  */
 
 #include <linux/linkage.h>
@@ -268,33 +267,25 @@
 
 #include <asm/machw.h>
 
-/*
- * Macintosh console support
- */
-
 #ifdef CONFIG_FRAMEBUFFER_CONSOLE
 #define CONSOLE
 #define CONSOLE_PENGUIN
 #endif
 
-/*
- * Macintosh serial debug support; outputs boot info to the printer
- *   and/or modem serial ports
- */
-#undef MAC_SERIAL_DEBUG
+#ifdef CONFIG_EARLY_PRINTK
+#define SERIAL_DEBUG
+#else
+#undef SERIAL_DEBUG
+#endif
 
-/*
- * Macintosh serial debug port selection; define one or both;
- *   requires MAC_SERIAL_DEBUG to be defined
- */
-#define MAC_USE_SCC_A		/* Macintosh modem serial port */
-#define MAC_USE_SCC_B		/* Macintosh printer serial port */
+#else /* !CONFIG_MAC */
 
-#endif	/* CONFIG_MAC */
+#define SERIAL_DEBUG
+
+#endif /* !CONFIG_MAC */
 
 #undef MMU_PRINT
 #undef MMU_NOCACHE_KERNEL
-#define SERIAL_DEBUG
 #undef DEBUG
 
 /*
@@ -655,11 +646,11 @@ ENTRY(__start)
 	lea	%pc@(L(mac_rowbytes)),%a1
 	movel	%a0@,%a1@
 
-#ifdef MAC_SERIAL_DEBUG
+#ifdef SERIAL_DEBUG
 	get_bi_record	BI_MAC_SCCBASE
 	lea	%pc@(L(mac_sccbase)),%a1
 	movel	%a0@,%a1@
-#endif /* MAC_SERIAL_DEBUG */
+#endif
 
 #if 0
 	/*
@@ -1427,7 +1418,7 @@ L(mmu_fixup_done):
 	subl	%d0,L(console_font)
 	subl	%d0,L(console_font_data)
 #endif
-#ifdef MAC_SERIAL_DEBUG
+#ifdef SERIAL_DEBUG
 	orl	#0x50000000,L(mac_sccbase)
 #endif
 1:
@@ -1917,7 +1908,7 @@ mmu_030_print:
 	jbne	30b
 
 mmu_print_done:
-	puts	"\n\n"
+	puts	"\n"
 
 func_return	mmu_print
 
@@ -2768,7 +2759,7 @@ L(scc_initable_mac):
 	.byte	9,0		/* no interrupts */
 	.byte	10,0		/* NRZ */
 	.byte	11,0x50		/* use baud rate generator */
-	.byte	12,10,13,0	/* 9600 baud */
+	.byte	12,1,13,0	/* 38400 baud */
 	.byte	14,1		/* Baud rate generator enable */
 	.byte	3,0xc1		/* enable receiver */
 	.byte	5,0xea		/* enable transmitter */
@@ -2906,10 +2897,12 @@ func_start	serial_init,%d0/%d1/%a0/%a1
 #endif
 #ifdef CONFIG_MAC
 	is_not_mac(L(serial_init_not_mac))
-#ifdef MAC_SERIAL_DEBUG
-#if !defined(MAC_USE_SCC_A) && !defined(MAC_USE_SCC_B)
-#define MAC_USE_SCC_B
-#endif
+
+#ifdef SERIAL_DEBUG
+/* You may define either or both of these. */
+#define MAC_USE_SCC_A /* Modem port */
+#define MAC_USE_SCC_B /* Printer port */
+
 #define mac_scc_cha_b_ctrl_offset	0x0
 #define mac_scc_cha_a_ctrl_offset	0x2
 #define mac_scc_cha_b_data_offset	0x4
@@ -2940,7 +2933,7 @@ func_start	serial_init,%d0/%d1/%a0/%a1
 	jra	7b
 8:
 #endif	/* MAC_USE_SCC_B */
-#endif	/* MAC_SERIAL_DEBUG */
+#endif	/* SERIAL_DEBUG */
 
 	jra	L(serial_init_done)
 L(serial_init_not_mac):
@@ -3011,7 +3004,7 @@ func_start	serial_putc,%d0/%d1/%a0/%a1
 #ifdef CONFIG_MAC
 	is_not_mac(5f)
 
-#ifdef MAC_SERIAL_DEBUG
+#ifdef SERIAL_DEBUG
 
 #ifdef MAC_USE_SCC_A
 	movel	%pc@(L(mac_sccbase)),%a1
@@ -3029,7 +3022,7 @@ func_start	serial_putc,%d0/%d1/%a0/%a1
 	moveb	%d0,%a1@(mac_scc_cha_b_data_offset)
 #endif	/* MAC_USE_SCC_B */
 
-#endif	/* MAC_SERIAL_DEBUG */
+#endif	/* SERIAL_DEBUG */
 
 	jra	L(serial_putc_done)
 5:
@@ -3248,33 +3241,39 @@ func_return	putn
 
 #ifdef CONFIG_MAC
 /*
- *	mac_serial_print
+ *	mac_early_print
  *
  *	This routine takes its parameters on the stack.  It then
- *	turns around and calls the internal routine.  This routine
- *	is used until the Linux console driver initializes itself.
+ *	turns around and calls the internal routines.  This routine
+ *	is used by the boot console.
  *
  *	The calling parameters are:
- *		void mac_serial_print(const char *str);
+ *		void mac_early_print(const char *str, unsigned length);
  *
  *	This routine does NOT understand variable arguments only
  *	simple strings!
  */
-ENTRY(mac_serial_print)
-	moveml	%d0/%a0,%sp@-
-#if 1
-	move	%sr,%sp@-
+ENTRY(mac_early_print)
+	moveml	%d0/%d1/%a0,%sp@-
+	movew	%sr,%sp@-
 	ori	#0x0700,%sr
-#endif
-	movel	%sp@(10),%a0		/* fetch parameter */
+	movel	%sp@(18),%a0		/* fetch parameter */
+	movel	%sp@(22),%d1		/* fetch parameter */
 	jra	2f
-1:	serial_putc	%d0
-2:	moveb	%a0@+,%d0
-	jne	1b
-#if 1
-	move	%sp@+,%sr
+1:
+#ifdef CONSOLE
+	console_putc	%d0
 #endif
-	moveml	%sp@+,%d0/%a0
+#ifdef SERIAL_DEBUG
+	serial_putc	%d0
+#endif
+	subq	#1,%d1
+2:	jeq	3f
+	moveb	%a0@+,%d0
+	jne	1b
+3:
+	movew	%sp@+,%sr
+	moveml	%sp@+,%d0/%d1/%a0
 	rts
 #endif /* CONFIG_MAC */
 
@@ -3409,10 +3408,10 @@ func_start	console_put_stats,%a0/%d7
 	 *		a0 = pointer to boot_info
 	 *		d7 = value of boot_info fields
 	 */
-	puts	"\nMacLinux\n\n"
+	puts	"\nMacLinux\n"
 
 #ifdef SERIAL_DEBUG
-	puts	" vidaddr:"
+	puts	"\n vidaddr:"
 	putn	%pc@(L(mac_videobase))		/* video addr. */
 
 	puts	"\n  _stext:"
@@ -3423,19 +3422,21 @@ func_start	console_put_stats,%a0/%d7
 	lea	%pc@(_end),%a0
 	putn	%a0
 
-	puts	"\ncpuid:"
+	puts	"\n   cpuid:"
 	putn	%pc@(L(cputype))
-	putc	'\n'
 
-#ifdef MAC_SERIAL_DEBUG
+#  ifdef CONFIG_MAC
+	puts	"\n sccbase:"
 	putn	%pc@(L(mac_sccbase))
+#  endif
+#  ifdef MMU_PRINT
 	putc	'\n'
-#endif
-#  if defined(MMU_PRINT)
 	jbsr	mmu_print_machine_cpu_types
-#  endif /* MMU_PRINT */
+#  endif
 #endif /* SERIAL_DEBUG */
 
+	putc	'\n'
+
 func_return	console_put_stats
 
 #ifdef CONSOLE_PENGUIN
@@ -3896,11 +3897,11 @@ L(mac_dimensions):
 	.long	0
 L(mac_rowbytes):
 	.long	0
-#ifdef MAC_SERIAL_DEBUG
+#ifdef SERIAL_DEBUG
 L(mac_sccbase):
 	.long	0
-#endif /* MAC_SERIAL_DEBUG */
 #endif
+#endif /* CONFIG_MAC */
 
 #if defined (CONFIG_APOLLO)
 LSRB0        = 0x10412
diff --git a/arch/m68k/kernel/init_task.c b/arch/m68k/kernel/init_task.c
index cbf9dc3..c744cfc 100644
--- a/arch/m68k/kernel/init_task.c
+++ b/arch/m68k/kernel/init_task.c
@@ -19,7 +19,6 @@ static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
  *
  * All other task structs will be allocated on slabs in fork.c
  */
-__asm__(".align 4");
 struct task_struct init_task = INIT_TASK(init_task);
 
 EXPORT_SYMBOL(init_task);
@@ -27,7 +26,7 @@ EXPORT_SYMBOL(init_task);
 /*
  * Initial thread structure.
  *
- * We need to make sure that this is 8192-byte aligned due to the
+ * We need to make sure that this is THREAD size aligned due to the
  * way process stacks are handled. This is done by having a special
  * "init_task" linker map entry..
  */
diff --git a/arch/m68k/kernel/m68k_ksyms.c b/arch/m68k/kernel/m68k_ksyms.c
index 1b7a14d..774c1bd 100644
--- a/arch/m68k/kernel/m68k_ksyms.c
+++ b/arch/m68k/kernel/m68k_ksyms.c
@@ -14,7 +14,7 @@ EXPORT_SYMBOL(__ashrdi3);
 EXPORT_SYMBOL(__lshrdi3);
 EXPORT_SYMBOL(__muldi3);
 
-#if defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE)
+#if defined(CONFIG_CPU_HAS_NO_MULDIV64)
 /*
  * Simpler 68k and ColdFire parts also need a few other gcc functions.
  */
diff --git a/arch/m68k/kernel/process_mm.c b/arch/m68k/kernel/process_mm.c
index 1bc223a..125f34e 100644
--- a/arch/m68k/kernel/process_mm.c
+++ b/arch/m68k/kernel/process_mm.c
@@ -33,22 +33,6 @@
 #include <asm/setup.h>
 #include <asm/pgtable.h>
 
-/*
- * Initial task/thread structure. Make this a per-architecture thing,
- * because different architectures tend to have different
- * alignment requirements and potentially different initial
- * setup.
- */
-static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
-static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-union thread_union init_thread_union __init_task_data
-	__attribute__((aligned(THREAD_SIZE))) =
-		{ INIT_THREAD_INFO(init_task) };
-
-/* initial task structure */
-struct task_struct init_task = INIT_TASK(init_task);
-
-EXPORT_SYMBOL(init_task);
 
 asmlinkage void ret_from_fork(void);
 
@@ -188,9 +172,7 @@ void flush_thread(void)
 
 	current->thread.fs = __USER_DS;
 	if (!FPU_IS_EMU)
-		asm volatile (".chip 68k/68881\n\t"
-			      "frestore %0@\n\t"
-			      ".chip 68k" : : "a" (&zero));
+		asm volatile ("frestore %0@" : : "a" (&zero) : "memory");
 }
 
 /*
@@ -264,11 +246,28 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 		/* Copy the current fpu state */
 		asm volatile ("fsave %0" : : "m" (p->thread.fpstate[0]) : "memory");
 
-		if (!CPU_IS_060 ? p->thread.fpstate[0] : p->thread.fpstate[2])
-		  asm volatile ("fmovemx %/fp0-%/fp7,%0\n\t"
-				"fmoveml %/fpiar/%/fpcr/%/fpsr,%1"
-				: : "m" (p->thread.fp[0]), "m" (p->thread.fpcntl[0])
-				: "memory");
+		if (!CPU_IS_060 ? p->thread.fpstate[0] : p->thread.fpstate[2]) {
+			if (CPU_IS_COLDFIRE) {
+				asm volatile ("fmovemd %/fp0-%/fp7,%0\n\t"
+					      "fmovel %/fpiar,%1\n\t"
+					      "fmovel %/fpcr,%2\n\t"
+					      "fmovel %/fpsr,%3"
+					      :
+					      : "m" (p->thread.fp[0]),
+						"m" (p->thread.fpcntl[0]),
+						"m" (p->thread.fpcntl[1]),
+						"m" (p->thread.fpcntl[2])
+					      : "memory");
+			} else {
+				asm volatile ("fmovemx %/fp0-%/fp7,%0\n\t"
+					      "fmoveml %/fpiar/%/fpcr/%/fpsr,%1"
+					      :
+					      : "m" (p->thread.fp[0]),
+						"m" (p->thread.fpcntl[0])
+					      : "memory");
+			}
+		}
+
 		/* Restore the state in case the fpu was busy */
 		asm volatile ("frestore %0" : : "m" (p->thread.fpstate[0]));
 	}
@@ -301,12 +300,28 @@ int dump_fpu (struct pt_regs *regs, struct user_m68kfp_struct *fpu)
 	if (!CPU_IS_060 ? !fpustate[0] : !fpustate[2])
 		return 0;
 
-	asm volatile ("fmovem %/fpiar/%/fpcr/%/fpsr,%0"
-		:: "m" (fpu->fpcntl[0])
-		: "memory");
-	asm volatile ("fmovemx %/fp0-%/fp7,%0"
-		:: "m" (fpu->fpregs[0])
-		: "memory");
+	if (CPU_IS_COLDFIRE) {
+		asm volatile ("fmovel %/fpiar,%0\n\t"
+			      "fmovel %/fpcr,%1\n\t"
+			      "fmovel %/fpsr,%2\n\t"
+			      "fmovemd %/fp0-%/fp7,%3"
+			      :
+			      : "m" (fpu->fpcntl[0]),
+				"m" (fpu->fpcntl[1]),
+				"m" (fpu->fpcntl[2]),
+				"m" (fpu->fpregs[0])
+			      : "memory");
+	} else {
+		asm volatile ("fmovem %/fpiar/%/fpcr/%/fpsr,%0"
+			      :
+			      : "m" (fpu->fpcntl[0])
+			      : "memory");
+		asm volatile ("fmovemx %/fp0-%/fp7,%0"
+			      :
+			      : "m" (fpu->fpregs[0])
+			      : "memory");
+	}
+
 	return 1;
 }
 EXPORT_SYMBOL(dump_fpu);
diff --git a/arch/m68k/kernel/ptrace_mm.c b/arch/m68k/kernel/ptrace_mm.c
index 0b25268..7bc999b 100644
--- a/arch/m68k/kernel/ptrace_mm.c
+++ b/arch/m68k/kernel/ptrace_mm.c
@@ -18,6 +18,7 @@
 #include <linux/ptrace.h>
 #include <linux/user.h>
 #include <linux/signal.h>
+#include <linux/tracehook.h>
 
 #include <asm/uaccess.h>
 #include <asm/page.h>
@@ -275,3 +276,20 @@ asmlinkage void syscall_trace(void)
 		current->exit_code = 0;
 	}
 }
+
+#ifdef CONFIG_COLDFIRE
+asmlinkage int syscall_trace_enter(void)
+{
+	int ret = 0;
+
+	if (test_thread_flag(TIF_SYSCALL_TRACE))
+		ret = tracehook_report_syscall_entry(task_pt_regs(current));
+	return ret;
+}
+
+asmlinkage void syscall_trace_leave(void)
+{
+	if (test_thread_flag(TIF_SYSCALL_TRACE))
+		tracehook_report_syscall_exit(task_pt_regs(current), 0);
+}
+#endif /* CONFIG_COLDFIRE */
diff --git a/arch/m68k/kernel/setup_mm.c b/arch/m68k/kernel/setup_mm.c
index c3b4506..d872ce4 100644
--- a/arch/m68k/kernel/setup_mm.c
+++ b/arch/m68k/kernel/setup_mm.c
@@ -221,7 +221,8 @@ void __init setup_arch(char **cmdline_p)
 #endif
 
 	/* The bootinfo is located right after the kernel bss */
-	m68k_parse_bootinfo((const struct bi_record *)_end);
+	if (!CPU_IS_COLDFIRE)
+		m68k_parse_bootinfo((const struct bi_record *)_end);
 
 	if (CPU_IS_040)
 		m68k_is040or060 = 4;
@@ -235,7 +236,7 @@ void __init setup_arch(char **cmdline_p)
 	 *  with them, we should add a test to check_bugs() below] */
 #ifndef CONFIG_M68KFPU_EMU_ONLY
 	/* clear the fpu if we have one */
-	if (m68k_fputype & (FPU_68881|FPU_68882|FPU_68040|FPU_68060)) {
+	if (m68k_fputype & (FPU_68881|FPU_68882|FPU_68040|FPU_68060|FPU_COLDFIRE)) {
 		volatile int zero = 0;
 		asm volatile ("frestore %0" : : "m" (zero));
 	}
@@ -258,6 +259,10 @@ void __init setup_arch(char **cmdline_p)
 	init_mm.end_data = (unsigned long)_edata;
 	init_mm.brk = (unsigned long)_end;
 
+#if defined(CONFIG_BOOTPARAM)
+	strncpy(m68k_command_line, CONFIG_BOOTPARAM_STRING, CL_SIZE);
+	m68k_command_line[CL_SIZE - 1] = 0;
+#endif /* CONFIG_BOOTPARAM */
 	*cmdline_p = m68k_command_line;
 	memcpy(boot_command_line, *cmdline_p, CL_SIZE);
 
@@ -323,6 +328,11 @@ void __init setup_arch(char **cmdline_p)
 		config_sun3x();
 		break;
 #endif
+#ifdef CONFIG_COLDFIRE
+	case MACH_M54XX:
+		config_BSP(NULL, 0);
+		break;
+#endif
 	default:
 		panic("No configuration setup");
 	}
@@ -384,6 +394,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 #define LOOP_CYCLES_68030	(8)
 #define LOOP_CYCLES_68040	(3)
 #define LOOP_CYCLES_68060	(1)
+#define LOOP_CYCLES_COLDFIRE	(2)
 
 	if (CPU_IS_020) {
 		cpu = "68020";
@@ -397,6 +408,9 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	} else if (CPU_IS_060) {
 		cpu = "68060";
 		clockfactor = LOOP_CYCLES_68060;
+	} else if (CPU_IS_COLDFIRE) {
+		cpu = "ColdFire";
+		clockfactor = LOOP_CYCLES_COLDFIRE;
 	} else {
 		cpu = "680x0";
 		clockfactor = 0;
@@ -415,6 +429,8 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		fpu = "68060";
 	else if (m68k_fputype & FPU_SUNFPA)
 		fpu = "Sun FPA";
+	else if (m68k_fputype & FPU_COLDFIRE)
+		fpu = "ColdFire";
 	else
 		fpu = "none";
 #endif
@@ -431,6 +447,8 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		mmu = "Sun-3";
 	else if (m68k_mmutype & MMU_APOLLO)
 		mmu = "Apollo";
+	else if (m68k_mmutype & MMU_COLDFIRE)
+		mmu = "ColdFire";
 	else
 		mmu = "unknown";
 
diff --git a/arch/m68k/kernel/setup_no.c b/arch/m68k/kernel/setup_no.c
index 2ed8c0f..ca3df0d 100644
--- a/arch/m68k/kernel/setup_no.c
+++ b/arch/m68k/kernel/setup_no.c
@@ -47,7 +47,6 @@ EXPORT_SYMBOL(memory_end);
 char __initdata command_line[COMMAND_LINE_SIZE];
 
 /* machine dependent timer functions */
-void (*mach_gettod)(int*, int*, int*, int*, int*, int*);
 int (*mach_set_clock_mmss)(unsigned long);
 
 /* machine dependent reboot functions */
diff --git a/arch/m68k/kernel/signal_mm.c b/arch/m68k/kernel/signal_mm.c
index a0afc23..cb856f9 100644
--- a/arch/m68k/kernel/signal_mm.c
+++ b/arch/m68k/kernel/signal_mm.c
@@ -56,7 +56,11 @@ static const int frame_extra_sizes[16] = {
   [1]	= -1, /* sizeof(((struct frame *)0)->un.fmt1), */
   [2]	= sizeof(((struct frame *)0)->un.fmt2),
   [3]	= sizeof(((struct frame *)0)->un.fmt3),
+#ifdef CONFIG_COLDFIRE
+  [4]	= 0,
+#else
   [4]	= sizeof(((struct frame *)0)->un.fmt4),
+#endif
   [5]	= -1, /* sizeof(((struct frame *)0)->un.fmt5), */
   [6]	= -1, /* sizeof(((struct frame *)0)->un.fmt6), */
   [7]	= sizeof(((struct frame *)0)->un.fmt7),
@@ -84,7 +88,11 @@ int handle_kernel_fault(struct pt_regs *regs)
 	regs->stkadj = frame_extra_sizes[regs->format];
 	tregs =	(struct pt_regs *)((long)regs + regs->stkadj);
 	tregs->vector = regs->vector;
+#ifdef CONFIG_COLDFIRE
+	tregs->format = 4;
+#else
 	tregs->format = 0;
+#endif
 	tregs->pc = fixup->fixup;
 	tregs->sr = regs->sr;
 
@@ -195,7 +203,8 @@ static inline int restore_fpu_state(struct sigcontext *sc)
 
 	if (CPU_IS_060 ? sc->sc_fpstate[2] : sc->sc_fpstate[0]) {
 	    /* Verify the frame format.  */
-	    if (!CPU_IS_060 && (sc->sc_fpstate[0] != fpu_version))
+	    if (!(CPU_IS_060 || CPU_IS_COLDFIRE) &&
+		 (sc->sc_fpstate[0] != fpu_version))
 		goto out;
 	    if (CPU_IS_020_OR_030) {
 		if (m68k_fputype & FPU_68881 &&
@@ -214,19 +223,43 @@ static inline int restore_fpu_state(struct sigcontext *sc)
                       sc->sc_fpstate[3] == 0x60 ||
 		      sc->sc_fpstate[3] == 0xe0))
 		    goto out;
+	    } else if (CPU_IS_COLDFIRE) {
+		if (!(sc->sc_fpstate[0] == 0x00 ||
+		      sc->sc_fpstate[0] == 0x05 ||
+		      sc->sc_fpstate[0] == 0xe5))
+		    goto out;
 	    } else
 		goto out;
 
-	    __asm__ volatile (".chip 68k/68881\n\t"
-			      "fmovemx %0,%%fp0-%%fp1\n\t"
-			      "fmoveml %1,%%fpcr/%%fpsr/%%fpiar\n\t"
-			      ".chip 68k"
-			      : /* no outputs */
-			      : "m" (*sc->sc_fpregs), "m" (*sc->sc_fpcntl));
+	    if (CPU_IS_COLDFIRE) {
+		__asm__ volatile ("fmovemd %0,%%fp0-%%fp1\n\t"
+				  "fmovel %1,%%fpcr\n\t"
+				  "fmovel %2,%%fpsr\n\t"
+				  "fmovel %3,%%fpiar"
+				  : /* no outputs */
+				  : "m" (sc->sc_fpregs[0]),
+				    "m" (sc->sc_fpcntl[0]),
+				    "m" (sc->sc_fpcntl[1]),
+				    "m" (sc->sc_fpcntl[2]));
+	    } else {
+		__asm__ volatile (".chip 68k/68881\n\t"
+				  "fmovemx %0,%%fp0-%%fp1\n\t"
+				  "fmoveml %1,%%fpcr/%%fpsr/%%fpiar\n\t"
+				  ".chip 68k"
+				  : /* no outputs */
+				  : "m" (*sc->sc_fpregs),
+				    "m" (*sc->sc_fpcntl));
+	    }
+	}
+
+	if (CPU_IS_COLDFIRE) {
+		__asm__ volatile ("frestore %0" : : "m" (*sc->sc_fpstate));
+	} else {
+		__asm__ volatile (".chip 68k/68881\n\t"
+				  "frestore %0\n\t"
+				  ".chip 68k"
+				  : : "m" (*sc->sc_fpstate));
 	}
-	__asm__ volatile (".chip 68k/68881\n\t"
-			  "frestore %0\n\t"
-			  ".chip 68k" : : "m" (*sc->sc_fpstate));
 	err = 0;
 
 out:
@@ -241,7 +274,7 @@ out:
 static inline int rt_restore_fpu_state(struct ucontext __user *uc)
 {
 	unsigned char fpstate[FPCONTEXT_SIZE];
-	int context_size = CPU_IS_060 ? 8 : 0;
+	int context_size = CPU_IS_060 ? 8 : (CPU_IS_COLDFIRE ? 12 : 0);
 	fpregset_t fpregs;
 	int err = 1;
 
@@ -260,10 +293,11 @@ static inline int rt_restore_fpu_state(struct ucontext __user *uc)
 	if (__get_user(*(long *)fpstate, (long __user *)&uc->uc_fpstate))
 		goto out;
 	if (CPU_IS_060 ? fpstate[2] : fpstate[0]) {
-		if (!CPU_IS_060)
+		if (!(CPU_IS_060 || CPU_IS_COLDFIRE))
 			context_size = fpstate[1];
 		/* Verify the frame format.  */
-		if (!CPU_IS_060 && (fpstate[0] != fpu_version))
+		if (!(CPU_IS_060 || CPU_IS_COLDFIRE) &&
+		     (fpstate[0] != fpu_version))
 			goto out;
 		if (CPU_IS_020_OR_030) {
 			if (m68k_fputype & FPU_68881 &&
@@ -282,26 +316,50 @@ static inline int rt_restore_fpu_state(struct ucontext __user *uc)
 			      fpstate[3] == 0x60 ||
 			      fpstate[3] == 0xe0))
 				goto out;
+		} else if (CPU_IS_COLDFIRE) {
+			if (!(fpstate[3] == 0x00 ||
+			      fpstate[3] == 0x05 ||
+			      fpstate[3] == 0xe5))
+				goto out;
 		} else
 			goto out;
 		if (__copy_from_user(&fpregs, &uc->uc_mcontext.fpregs,
 				     sizeof(fpregs)))
 			goto out;
-		__asm__ volatile (".chip 68k/68881\n\t"
-				  "fmovemx %0,%%fp0-%%fp7\n\t"
-				  "fmoveml %1,%%fpcr/%%fpsr/%%fpiar\n\t"
-				  ".chip 68k"
-				  : /* no outputs */
-				  : "m" (*fpregs.f_fpregs),
-				    "m" (*fpregs.f_fpcntl));
+
+		if (CPU_IS_COLDFIRE) {
+			__asm__ volatile ("fmovemd %0,%%fp0-%%fp7\n\t"
+					  "fmovel %1,%%fpcr\n\t"
+					  "fmovel %2,%%fpsr\n\t"
+					  "fmovel %3,%%fpiar"
+					  : /* no outputs */
+					  : "m" (fpregs.f_fpregs[0]),
+					    "m" (fpregs.f_fpcntl[0]),
+					    "m" (fpregs.f_fpcntl[1]),
+					    "m" (fpregs.f_fpcntl[2]));
+		} else {
+			__asm__ volatile (".chip 68k/68881\n\t"
+					  "fmovemx %0,%%fp0-%%fp7\n\t"
+					  "fmoveml %1,%%fpcr/%%fpsr/%%fpiar\n\t"
+					  ".chip 68k"
+					  : /* no outputs */
+					  : "m" (*fpregs.f_fpregs),
+					    "m" (*fpregs.f_fpcntl));
+		}
 	}
 	if (context_size &&
 	    __copy_from_user(fpstate + 4, (long __user *)&uc->uc_fpstate + 1,
 			     context_size))
 		goto out;
-	__asm__ volatile (".chip 68k/68881\n\t"
-			  "frestore %0\n\t"
-			  ".chip 68k" : : "m" (*fpstate));
+
+	if (CPU_IS_COLDFIRE) {
+		__asm__ volatile ("frestore %0" : : "m" (*fpstate));
+	} else {
+		__asm__ volatile (".chip 68k/68881\n\t"
+				  "frestore %0\n\t"
+				  ".chip 68k"
+				  : : "m" (*fpstate));
+	}
 	err = 0;
 
 out:
@@ -336,8 +394,12 @@ static int mangle_kernel_stack(struct pt_regs *regs, int formatvec,
 		regs->format = formatvec >> 12;
 		regs->vector = formatvec & 0xfff;
 #define frame_offset (sizeof(struct pt_regs)+sizeof(struct switch_stack))
-		__asm__ __volatile__
-			("   movel %0,%/a0\n\t"
+		__asm__ __volatile__ (
+#ifdef CONFIG_COLDFIRE
+			 "   movel %0,%/sp\n\t"
+			 "   bra ret_from_signal\n"
+#else
+			 "   movel %0,%/a0\n\t"
 			 "   subl %1,%/a0\n\t"     /* make room on stack */
 			 "   movel %/a0,%/sp\n\t"  /* set stack pointer */
 			 /* move switch_stack and pt_regs */
@@ -350,6 +412,7 @@ static int mangle_kernel_stack(struct pt_regs *regs, int formatvec,
 			 "2: movel %4@+,%/a0@+\n\t"
 			 "   dbra %1,2b\n\t"
 			 "   bral ret_from_signal\n"
+#endif
 			 : /* no outputs, it doesn't ever return */
 			 : "a" (sw), "d" (fsize), "d" (frame_offset/4-1),
 			   "n" (frame_offset), "a" (buf + fsize/4)
@@ -516,10 +579,15 @@ static inline void save_fpu_state(struct sigcontext *sc, struct pt_regs *regs)
 		return;
 	}
 
-	__asm__ volatile (".chip 68k/68881\n\t"
-			  "fsave %0\n\t"
-			  ".chip 68k"
-			  : : "m" (*sc->sc_fpstate) : "memory");
+	if (CPU_IS_COLDFIRE) {
+		__asm__ volatile ("fsave %0"
+				  : : "m" (*sc->sc_fpstate) : "memory");
+	} else {
+		__asm__ volatile (".chip 68k/68881\n\t"
+				  "fsave %0\n\t"
+				  ".chip 68k"
+				  : : "m" (*sc->sc_fpstate) : "memory");
+	}
 
 	if (CPU_IS_060 ? sc->sc_fpstate[2] : sc->sc_fpstate[0]) {
 		fpu_version = sc->sc_fpstate[0];
@@ -530,21 +598,35 @@ static inline void save_fpu_state(struct sigcontext *sc, struct pt_regs *regs)
 			if (*(unsigned short *) sc->sc_fpstate == 0x1f38)
 				sc->sc_fpstate[0x38] |= 1 << 3;
 		}
-		__asm__ volatile (".chip 68k/68881\n\t"
-				  "fmovemx %%fp0-%%fp1,%0\n\t"
-				  "fmoveml %%fpcr/%%fpsr/%%fpiar,%1\n\t"
-				  ".chip 68k"
-				  : "=m" (*sc->sc_fpregs),
-				    "=m" (*sc->sc_fpcntl)
-				  : /* no inputs */
-				  : "memory");
+
+		if (CPU_IS_COLDFIRE) {
+			__asm__ volatile ("fmovemd %%fp0-%%fp1,%0\n\t"
+					  "fmovel %%fpcr,%1\n\t"
+					  "fmovel %%fpsr,%2\n\t"
+					  "fmovel %%fpiar,%3"
+					  : "=m" (sc->sc_fpregs[0]),
+					    "=m" (sc->sc_fpcntl[0]),
+					    "=m" (sc->sc_fpcntl[1]),
+					    "=m" (sc->sc_fpcntl[2])
+					  : /* no inputs */
+					  : "memory");
+		} else {
+			__asm__ volatile (".chip 68k/68881\n\t"
+					  "fmovemx %%fp0-%%fp1,%0\n\t"
+					  "fmoveml %%fpcr/%%fpsr/%%fpiar,%1\n\t"
+					  ".chip 68k"
+					  : "=m" (*sc->sc_fpregs),
+					    "=m" (*sc->sc_fpcntl)
+					  : /* no inputs */
+					  : "memory");
+		}
 	}
 }
 
 static inline int rt_save_fpu_state(struct ucontext __user *uc, struct pt_regs *regs)
 {
 	unsigned char fpstate[FPCONTEXT_SIZE];
-	int context_size = CPU_IS_060 ? 8 : 0;
+	int context_size = CPU_IS_060 ? 8 : (CPU_IS_COLDFIRE ? 12 : 0);
 	int err = 0;
 
 	if (FPU_IS_EMU) {
@@ -557,15 +639,19 @@ static inline int rt_save_fpu_state(struct ucontext __user *uc, struct pt_regs *
 		return err;
 	}
 
-	__asm__ volatile (".chip 68k/68881\n\t"
-			  "fsave %0\n\t"
-			  ".chip 68k"
-			  : : "m" (*fpstate) : "memory");
+	if (CPU_IS_COLDFIRE) {
+		__asm__ volatile ("fsave %0" : : "m" (*fpstate) : "memory");
+	} else {
+		__asm__ volatile (".chip 68k/68881\n\t"
+				  "fsave %0\n\t"
+				  ".chip 68k"
+				  : : "m" (*fpstate) : "memory");
+	}
 
 	err |= __put_user(*(long *)fpstate, (long __user *)&uc->uc_fpstate);
 	if (CPU_IS_060 ? fpstate[2] : fpstate[0]) {
 		fpregset_t fpregs;
-		if (!CPU_IS_060)
+		if (!(CPU_IS_060 || CPU_IS_COLDFIRE))
 			context_size = fpstate[1];
 		fpu_version = fpstate[0];
 		if (CPU_IS_020_OR_030 &&
@@ -575,14 +661,27 @@ static inline int rt_save_fpu_state(struct ucontext __user *uc, struct pt_regs *
 			if (*(unsigned short *) fpstate == 0x1f38)
 				fpstate[0x38] |= 1 << 3;
 		}
-		__asm__ volatile (".chip 68k/68881\n\t"
-				  "fmovemx %%fp0-%%fp7,%0\n\t"
-				  "fmoveml %%fpcr/%%fpsr/%%fpiar,%1\n\t"
-				  ".chip 68k"
-				  : "=m" (*fpregs.f_fpregs),
-				    "=m" (*fpregs.f_fpcntl)
-				  : /* no inputs */
-				  : "memory");
+		if (CPU_IS_COLDFIRE) {
+			__asm__ volatile ("fmovemd %%fp0-%%fp7,%0\n\t"
+					  "fmovel %%fpcr,%1\n\t"
+					  "fmovel %%fpsr,%2\n\t"
+					  "fmovel %%fpiar,%3"
+					  : "=m" (fpregs.f_fpregs[0]),
+					    "=m" (fpregs.f_fpcntl[0]),
+					    "=m" (fpregs.f_fpcntl[1]),
+					    "=m" (fpregs.f_fpcntl[2])
+					  : /* no inputs */
+					  : "memory");
+		} else {
+			__asm__ volatile (".chip 68k/68881\n\t"
+					  "fmovemx %%fp0-%%fp7,%0\n\t"
+					  "fmoveml %%fpcr/%%fpsr/%%fpiar,%1\n\t"
+					  ".chip 68k"
+					  : "=m" (*fpregs.f_fpregs),
+					    "=m" (*fpregs.f_fpcntl)
+					  : /* no inputs */
+					  : "memory");
+		}
 		err |= copy_to_user(&uc->uc_mcontext.fpregs, &fpregs,
 				    sizeof(fpregs));
 	}
@@ -679,8 +778,7 @@ static inline void push_cache (unsigned long vaddr)
 				      "cpushl %%bc,(%0)\n\t"
 				      ".chip 68k"
 				      : : "a" (temp));
-	}
-	else {
+	} else if (!CPU_IS_COLDFIRE) {
 		/*
 		 * 68030/68020 have no writeback cache;
 		 * still need to clear icache.
diff --git a/arch/m68k/kernel/syscalltable.S b/arch/m68k/kernel/syscalltable.S
index c468f2e..ce827b3 100644
--- a/arch/m68k/kernel/syscalltable.S
+++ b/arch/m68k/kernel/syscalltable.S
@@ -365,4 +365,6 @@ ENTRY(sys_call_table)
 	.long sys_clock_adjtime
 	.long sys_syncfs
 	.long sys_setns
+	.long sys_process_vm_readv	/* 345 */
+	.long sys_process_vm_writev
 
diff --git a/arch/m68k/kernel/time.c b/arch/m68k/kernel/time.c
index a5cf40c..75ab79b 100644
--- a/arch/m68k/kernel/time.c
+++ b/arch/m68k/kernel/time.c
@@ -1,4 +1,4 @@
-#ifdef CONFIG_MMU
+#if defined(CONFIG_MMU) && !defined(CONFIG_COLDFIRE)
 #include "time_mm.c"
 #else
 #include "time_no.c"
diff --git a/arch/m68k/kernel/time_no.c b/arch/m68k/kernel/time_no.c
index 6623909..3ef0f77 100644
--- a/arch/m68k/kernel/time_no.c
+++ b/arch/m68k/kernel/time_no.c
@@ -26,6 +26,9 @@
 
 #define	TICK_SIZE (tick_nsec / 1000)
 
+/* machine dependent timer functions */
+void (*mach_gettod)(int*, int*, int*, int*, int*, int*);
+
 static inline int set_rtc_mmss(unsigned long nowtime)
 {
 	if (mach_set_clock_mmss)
diff --git a/arch/m68k/kernel/traps.c b/arch/m68k/kernel/traps.c
index 89362f2..a76452c 100644
--- a/arch/m68k/kernel/traps.c
+++ b/arch/m68k/kernel/traps.c
@@ -706,6 +706,88 @@ create_atc_entry:
 #endif /* CPU_M68020_OR_M68030 */
 #endif /* !CONFIG_SUN3 */
 
+#if defined(CONFIG_COLDFIRE) && defined(CONFIG_MMU)
+#include <asm/mcfmmu.h>
+
+/*
+ *	The following table converts the FS encoding of a ColdFire
+ *	exception stack frame into the error_code value needed by
+ *	do_fault.
+*/
+static const unsigned char fs_err_code[] = {
+	0,  /* 0000 */
+	0,  /* 0001 */
+	0,  /* 0010 */
+	0,  /* 0011 */
+	1,  /* 0100 */
+	0,  /* 0101 */
+	0,  /* 0110 */
+	0,  /* 0111 */
+	2,  /* 1000 */
+	3,  /* 1001 */
+	2,  /* 1010 */
+	0,  /* 1011 */
+	1,  /* 1100 */
+	1,  /* 1101 */
+	0,  /* 1110 */
+	0   /* 1111 */
+};
+
+static inline void access_errorcf(unsigned int fs, struct frame *fp)
+{
+	unsigned long mmusr, addr;
+	unsigned int err_code;
+	int need_page_fault;
+
+	mmusr = mmu_read(MMUSR);
+	addr = mmu_read(MMUAR);
+
+	/*
+	 * error_code:
+	 *	bit 0 == 0 means no page found, 1 means protection fault
+	 *	bit 1 == 0 means read, 1 means write
+	 */
+	switch (fs) {
+	case  5:  /* 0101 TLB opword X miss */
+		need_page_fault = cf_tlb_miss(&fp->ptregs, 0, 0, 0);
+		addr = fp->ptregs.pc;
+		break;
+	case  6:  /* 0110 TLB extension word X miss */
+		need_page_fault = cf_tlb_miss(&fp->ptregs, 0, 0, 1);
+		addr = fp->ptregs.pc + sizeof(long);
+		break;
+	case 10:  /* 1010 TLB W miss */
+		need_page_fault = cf_tlb_miss(&fp->ptregs, 1, 1, 0);
+		break;
+	case 14: /* 1110 TLB R miss */
+		need_page_fault = cf_tlb_miss(&fp->ptregs, 0, 1, 0);
+		break;
+	default:
+		/* 0000 Normal  */
+		/* 0001 Reserved */
+		/* 0010 Interrupt during debug service routine */
+		/* 0011 Reserved */
+		/* 0100 X Protection */
+		/* 0111 IFP in emulator mode */
+		/* 1000 W Protection*/
+		/* 1001 Write error*/
+		/* 1011 Reserved*/
+		/* 1100 R Protection*/
+		/* 1101 R Protection*/
+		/* 1111 OEP in emulator mode*/
+		need_page_fault = 1;
+		break;
+	}
+
+	if (need_page_fault) {
+		err_code = fs_err_code[fs];
+		if ((fs == 13) && (mmusr & MMUSR_WF)) /* rd-mod-wr access */
+			err_code |= 2; /* bit1 - write, bit0 - protection */
+		do_page_fault(&fp->ptregs, addr, err_code);
+	}
+}
+#endif /* CONFIG_COLDFIRE CONFIG_MMU */
+
 asmlinkage void buserr_c(struct frame *fp)
 {
 	/* Only set esp0 if coming from user mode */
@@ -716,6 +798,28 @@ asmlinkage void buserr_c(struct frame *fp)
 	printk ("*** Bus Error *** Format is %x\n", fp->ptregs.format);
 #endif
 
+#if defined(CONFIG_COLDFIRE) && defined(CONFIG_MMU)
+	if (CPU_IS_COLDFIRE) {
+		unsigned int fs;
+		fs = (fp->ptregs.vector & 0x3) |
+			((fp->ptregs.vector & 0xc00) >> 8);
+		switch (fs) {
+		case 0x5:
+		case 0x6:
+		case 0x7:
+		case 0x9:
+		case 0xa:
+		case 0xd:
+		case 0xe:
+		case 0xf:
+			access_errorcf(fs, fp);
+			return;
+		default:
+			break;
+		}
+	}
+#endif /* CONFIG_COLDFIRE && CONFIG_MMU */
+
 	switch (fp->ptregs.format) {
 #if defined (CONFIG_M68060)
 	case 4:				/* 68060 access error */
diff --git a/arch/m68k/kernel/vmlinux.lds_no.S b/arch/m68k/kernel/vmlinux-nommu.lds
index 4e23893..8e66ccb 100644
--- a/arch/m68k/kernel/vmlinux.lds_no.S
+++ b/arch/m68k/kernel/vmlinux-nommu.lds
@@ -69,6 +69,7 @@ SECTIONS {
 		SCHED_TEXT
 		LOCK_TEXT
 		*(.text..lock)
+		*(.fixup)
 
 		. = ALIGN(16);          /* Exception table              */
 		__start___ex_table = .;
@@ -161,6 +162,13 @@ SECTIONS {
 		_edata = . ;
 	} > DATA
 
+	.m68k_fixup : {
+		__start_fixup = .;
+		*(.m68k_fixup)
+		__stop_fixup = .;
+	} > DATA
+	NOTES > DATA
+
 	.init.text : {
 		. = ALIGN(PAGE_SIZE);
 		__init_begin = .;
diff --git a/arch/m68k/kernel/vmlinux-std.lds b/arch/m68k/kernel/vmlinux-std.lds
index d099359..63407c8 100644
--- a/arch/m68k/kernel/vmlinux-std.lds
+++ b/arch/m68k/kernel/vmlinux-std.lds
@@ -31,7 +31,9 @@ SECTIONS
 
   RW_DATA_SECTION(16, PAGE_SIZE, THREAD_SIZE)
 
+  _sbss = .;
   BSS_SECTION(0, 0, 0)
+  _ebss = .;
 
   _edata = .;			/* End of data section */
 
diff --git a/arch/m68k/kernel/vmlinux-sun3.lds b/arch/m68k/kernel/vmlinux-sun3.lds
index 8080469..ad0f46d 100644
--- a/arch/m68k/kernel/vmlinux-sun3.lds
+++ b/arch/m68k/kernel/vmlinux-sun3.lds
@@ -44,7 +44,9 @@ __init_begin = .;
 	. = ALIGN(PAGE_SIZE);
 	__init_end = .;
 
+  _sbss = .;
   BSS_SECTION(0, 0, 0)
+  _ebss = .;
 
   _end = . ;
 
diff --git a/arch/m68k/kernel/vmlinux.lds.S b/arch/m68k/kernel/vmlinux.lds.S
index 030dabf..69ec796 100644
--- a/arch/m68k/kernel/vmlinux.lds.S
+++ b/arch/m68k/kernel/vmlinux.lds.S
@@ -1,5 +1,14 @@
-#ifdef CONFIG_MMU
-#include "vmlinux.lds_mm.S"
+#if defined(CONFIG_MMU) && !defined(CONFIG_COLDFIRE)
+PHDRS
+{
+  text PT_LOAD FILEHDR PHDRS FLAGS (7);
+  data PT_LOAD FLAGS (7);
+}
+#ifdef CONFIG_SUN3
+#include "vmlinux-sun3.lds"
 #else
-#include "vmlinux.lds_no.S"
+#include "vmlinux-std.lds"
+#endif
+#else
+#include "vmlinux-nommu.lds"
 #endif
diff --git a/arch/m68k/kernel/vmlinux.lds_mm.S b/arch/m68k/kernel/vmlinux.lds_mm.S
deleted file mode 100644
index 99ba315..0000000
--- a/arch/m68k/kernel/vmlinux.lds_mm.S
+++ /dev/null
@@ -1,10 +0,0 @@
-PHDRS
-{
-  text PT_LOAD FILEHDR PHDRS FLAGS (7);
-  data PT_LOAD FLAGS (7);
-}
-#ifdef CONFIG_SUN3
-#include "vmlinux-sun3.lds"
-#else
-#include "vmlinux-std.lds"
-#endif
diff --git a/arch/m68k/lib/Makefile b/arch/m68k/lib/Makefile
index 1a1bd90..a9d782d 100644
--- a/arch/m68k/lib/Makefile
+++ b/arch/m68k/lib/Makefile
@@ -6,9 +6,11 @@
 lib-y	:= ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \
 	   memcpy.o memset.o memmove.o
 
-ifdef CONFIG_MMU
-lib-y	+= string.o uaccess.o checksum_mm.o
-else
-lib-y	+= mulsi3.o divsi3.o udivsi3.o modsi3.o umodsi3.o checksum_no.o
+lib-$(CONFIG_MMU) += string.o uaccess.o
+lib-$(CONFIG_CPU_HAS_NO_MULDIV64) += mulsi3.o divsi3.o udivsi3.o
+lib-$(CONFIG_CPU_HAS_NO_MULDIV64) += modsi3.o umodsi3.o
+
+ifndef CONFIG_GENERIC_CSUM
+lib-y	+= checksum.o
 endif
 
diff --git a/arch/m68k/lib/checksum_mm.c b/arch/m68k/lib/checksum.c
index 6216f12..6216f12 100644
--- a/arch/m68k/lib/checksum_mm.c
+++ b/arch/m68k/lib/checksum.c
diff --git a/arch/m68k/lib/checksum_no.c b/arch/m68k/lib/checksum_no.c
deleted file mode 100644
index e4c6354..0000000
--- a/arch/m68k/lib/checksum_no.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  INET is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		IP/TCP/UDP checksumming routines
- *
- * Authors:	Jorge Cwik, <jorge@laser.satlink.net>
- *		Arnt Gulbrandsen, <agulbra@nvg.unit.no>
- *		Tom May, <ftom@netcom.com>
- *		Andreas Schwab, <schwab@issan.informatik.uni-dortmund.de>
- *		Lots of code moved from tcp.c and ip.c; see those files
- *		for more names.
- *
- * 03/02/96	Jes Sorensen, Andreas Schwab, Roman Hodek:
- *		Fixed some nasty bugs, causing some horrible crashes.
- *		A: At some points, the sum (%0) was used as
- *		length-counter instead of the length counter
- *		(%1). Thanks to Roman Hodek for pointing this out.
- *		B: GCC seems to mess up if one uses too many
- *		data-registers to hold input values and one tries to
- *		specify d0 and d1 as scratch registers. Letting gcc choose these
- *      registers itself solves the problem.
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- */
- 
-/* Revised by Kenneth Albanowski for m68knommu. Basic problem: unaligned access kills, so most
-   of the assembly has to go. */
-
-#include <linux/module.h>
-#include <net/checksum.h>
-
-static inline unsigned short from32to16(unsigned long x)
-{
-	/* add up 16-bit and 16-bit for 16+c bit */
-	x = (x & 0xffff) + (x >> 16);
-	/* add up carry.. */
-	x = (x & 0xffff) + (x >> 16);
-	return x;
-}
-
-static unsigned long do_csum(const unsigned char * buff, int len)
-{
-	int odd, count;
-	unsigned long result = 0;
-
-	if (len <= 0)
-		goto out;
-	odd = 1 & (unsigned long) buff;
-	if (odd) {
-		result = *buff;
-		len--;
-		buff++;
-	}
-	count = len >> 1;		/* nr of 16-bit words.. */
-	if (count) {
-		if (2 & (unsigned long) buff) {
-			result += *(unsigned short *) buff;
-			count--;
-			len -= 2;
-			buff += 2;
-		}
-		count >>= 1;		/* nr of 32-bit words.. */
-		if (count) {
-		        unsigned long carry = 0;
-			do {
-				unsigned long w = *(unsigned long *) buff;
-				count--;
-				buff += 4;
-				result += carry;
-				result += w;
-				carry = (w > result);
-			} while (count);
-			result += carry;
-			result = (result & 0xffff) + (result >> 16);
-		}
-		if (len & 2) {
-			result += *(unsigned short *) buff;
-			buff += 2;
-		}
-	}
-	if (len & 1)
-		result += (*buff << 8);
-	result = from32to16(result);
-	if (odd)
-		result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);
-out:
-	return result;
-}
-
-#ifdef CONFIG_COLDFIRE
-/*
- *	This is a version of ip_compute_csum() optimized for IP headers,
- *	which always checksum on 4 octet boundaries.
- */
-__sum16 ip_fast_csum(const void *iph, unsigned int ihl)
-{
-	return (__force __sum16)~do_csum(iph,ihl*4);
-}
-EXPORT_SYMBOL(ip_fast_csum);
-#endif
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-__wsum csum_partial(const void *buff, int len, __wsum sum)
-{
-	unsigned int result = do_csum(buff, len);
-
-	/* add in old sum, and carry.. */
-	result += (__force u32)sum;
-	if ((__force u32)sum > result)
-		result += 1;
-	return (__force __wsum)result;
-}
-
-EXPORT_SYMBOL(csum_partial);
-
-/*
- * copy from fs while checksumming, otherwise like csum_partial
- */
-
-__wsum
-csum_partial_copy_from_user(const void __user *src, void *dst,
-			    int len, __wsum sum, int *csum_err)
-{
-	if (csum_err) *csum_err = 0;
-	memcpy(dst, (__force const void *)src, len);
-	return csum_partial(dst, len, sum);
-}
-EXPORT_SYMBOL(csum_partial_copy_from_user);
-
-/*
- * copy from ds while checksumming, otherwise like csum_partial
- */
-
-__wsum
-csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum)
-{
-	memcpy(dst, src, len);
-	return csum_partial(dst, len, sum);
-}
-EXPORT_SYMBOL(csum_partial_copy_nocheck);
diff --git a/arch/m68k/lib/uaccess.c b/arch/m68k/lib/uaccess.c
index 13854ed..5664386 100644
--- a/arch/m68k/lib/uaccess.c
+++ b/arch/m68k/lib/uaccess.c
@@ -15,17 +15,17 @@ unsigned long __generic_copy_from_user(void *to, const void __user *from,
 	asm volatile ("\n"
 		"	tst.l	%0\n"
 		"	jeq	2f\n"
-		"1:	moves.l	(%1)+,%3\n"
+		"1:	"MOVES".l	(%1)+,%3\n"
 		"	move.l	%3,(%2)+\n"
 		"	subq.l	#1,%0\n"
 		"	jne	1b\n"
 		"2:	btst	#1,%5\n"
 		"	jeq	4f\n"
-		"3:	moves.w	(%1)+,%3\n"
+		"3:	"MOVES".w	(%1)+,%3\n"
 		"	move.w	%3,(%2)+\n"
 		"4:	btst	#0,%5\n"
 		"	jeq	6f\n"
-		"5:	moves.b	(%1)+,%3\n"
+		"5:	"MOVES".b	(%1)+,%3\n"
 		"	move.b  %3,(%2)+\n"
 		"6:\n"
 		"	.section .fixup,\"ax\"\n"
@@ -68,17 +68,17 @@ unsigned long __generic_copy_to_user(void __user *to, const void *from,
 		"	tst.l	%0\n"
 		"	jeq	4f\n"
 		"1:	move.l	(%1)+,%3\n"
-		"2:	moves.l	%3,(%2)+\n"
+		"2:	"MOVES".l	%3,(%2)+\n"
 		"3:	subq.l	#1,%0\n"
 		"	jne	1b\n"
 		"4:	btst	#1,%5\n"
 		"	jeq	6f\n"
 		"	move.w	(%1)+,%3\n"
-		"5:	moves.w	%3,(%2)+\n"
+		"5:	"MOVES".w	%3,(%2)+\n"
 		"6:	btst	#0,%5\n"
 		"	jeq	8f\n"
 		"	move.b	(%1)+,%3\n"
-		"7:	moves.b  %3,(%2)+\n"
+		"7:	"MOVES".b  %3,(%2)+\n"
 		"8:\n"
 		"	.section .fixup,\"ax\"\n"
 		"	.even\n"
@@ -115,7 +115,7 @@ long strncpy_from_user(char *dst, const char __user *src, long count)
 		return count;
 
 	asm volatile ("\n"
-		"1:	moves.b	(%2)+,%4\n"
+		"1:	"MOVES".b	(%2)+,%4\n"
 		"	move.b	%4,(%1)+\n"
 		"	jeq	2f\n"
 		"	subq.l	#1,%3\n"
@@ -152,7 +152,7 @@ long strnlen_user(const char __user *src, long n)
 	asm volatile ("\n"
 		"1:	subq.l	#1,%1\n"
 		"	jmi	3f\n"
-		"2:	moves.b	(%0)+,%2\n"
+		"2:	"MOVES".b	(%0)+,%2\n"
 		"	tst.b	%2\n"
 		"	jne	1b\n"
 		"	jra	4f\n"
@@ -188,15 +188,15 @@ unsigned long __clear_user(void __user *to, unsigned long n)
 	asm volatile ("\n"
 		"	tst.l	%0\n"
 		"	jeq	3f\n"
-		"1:	moves.l	%2,(%1)+\n"
+		"1:	"MOVES".l	%2,(%1)+\n"
 		"2:	subq.l	#1,%0\n"
 		"	jne	1b\n"
 		"3:	btst	#1,%4\n"
 		"	jeq	5f\n"
-		"4:	moves.w	%2,(%1)+\n"
+		"4:	"MOVES".w	%2,(%1)+\n"
 		"5:	btst	#0,%4\n"
 		"	jeq	7f\n"
-		"6:	moves.b	%2,(%1)\n"
+		"6:	"MOVES".b	%2,(%1)\n"
 		"7:\n"
 		"	.section .fixup,\"ax\"\n"
 		"	.even\n"
diff --git a/arch/m68k/mac/baboon.c b/arch/m68k/mac/baboon.c
index b403924..3fe0e43 100644
--- a/arch/m68k/mac/baboon.c
+++ b/arch/m68k/mac/baboon.c
@@ -8,13 +8,8 @@
 
 #include <linux/types.h>
 #include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/init.h>
 #include <linux/irq.h>
 
-#include <asm/traps.h>
-#include <asm/bootinfo.h>
 #include <asm/macintosh.h>
 #include <asm/macints.h>
 #include <asm/mac_baboon.h>
@@ -23,7 +18,6 @@
 
 int baboon_present;
 static volatile struct baboon *baboon;
-static unsigned char baboon_disabled;
 
 #if 0
 extern int macide_ack_intr(struct ata_channel *);
@@ -89,51 +83,32 @@ static void baboon_irq(unsigned int irq, struct irq_desc *desc)
 
 void __init baboon_register_interrupts(void)
 {
-	baboon_disabled = 0;
 	irq_set_chained_handler(IRQ_NUBUS_C, baboon_irq);
 }
 
 /*
- * The means for masking individual baboon interrupts remains a mystery, so
- * enable the umbrella interrupt only when no baboon interrupt is disabled.
+ * The means for masking individual Baboon interrupts remains a mystery.
+ * However, since we only use the IDE IRQ, we can just enable/disable all
+ * Baboon interrupts. If/when we handle more than one Baboon IRQ, we must
+ * either figure out how to mask them individually or else implement the
+ * same workaround that's used for NuBus slots (see nubus_disabled and
+ * via_nubus_irq_shutdown).
  */
 
 void baboon_irq_enable(int irq)
 {
-	int irq_idx = IRQ_IDX(irq);
-
 #ifdef DEBUG_IRQUSE
 	printk("baboon_irq_enable(%d)\n", irq);
 #endif
 
-	baboon_disabled &= ~(1 << irq_idx);
-	if (!baboon_disabled)
-		mac_irq_enable(irq_get_irq_data(IRQ_NUBUS_C));
+	mac_irq_enable(irq_get_irq_data(IRQ_NUBUS_C));
 }
 
 void baboon_irq_disable(int irq)
 {
-	int irq_idx = IRQ_IDX(irq);
-
 #ifdef DEBUG_IRQUSE
 	printk("baboon_irq_disable(%d)\n", irq);
 #endif
 
-	baboon_disabled |= 1 << irq_idx;
-	if (baboon_disabled)
-		mac_irq_disable(irq_get_irq_data(IRQ_NUBUS_C));
-}
-
-void baboon_irq_clear(int irq)
-{
-	int irq_idx = IRQ_IDX(irq);
-
-	baboon->mb_ifr &= ~(1 << irq_idx);
-}
-
-int baboon_irq_pending(int irq)
-{
-	int irq_idx = IRQ_IDX(irq);
-
-	return baboon->mb_ifr & (1 << irq_idx);
+	mac_irq_disable(irq_get_irq_data(IRQ_NUBUS_C));
 }
diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c
index c247de0..f60ff5f 100644
--- a/arch/m68k/mac/config.c
+++ b/arch/m68k/mac/config.c
@@ -71,6 +71,31 @@ static void mac_get_model(char *str);
 static void mac_identify(void);
 static void mac_report_hardware(void);
 
+#ifdef CONFIG_EARLY_PRINTK
+asmlinkage void __init mac_early_print(const char *s, unsigned n);
+
+static void __init mac_early_cons_write(struct console *con,
+                                 const char *s, unsigned n)
+{
+	mac_early_print(s, n);
+}
+
+static struct console __initdata mac_early_cons = {
+	.name  = "early",
+	.write = mac_early_cons_write,
+	.flags = CON_PRINTBUFFER | CON_BOOT,
+	.index = -1
+};
+
+int __init mac_unregister_early_cons(void)
+{
+	/* mac_early_print can't be used after init sections are discarded */
+	return unregister_console(&mac_early_cons);
+}
+
+late_initcall(mac_unregister_early_cons);
+#endif
+
 static void __init mac_sched_init(irq_handler_t vector)
 {
 	via_init_clock(vector);
@@ -164,6 +189,10 @@ void __init config_mac(void)
 	mach_beep = mac_mksound;
 #endif
 
+#ifdef CONFIG_EARLY_PRINTK
+	register_console(&mac_early_cons);
+#endif
+
 	/*
 	 * Determine hardware present
 	 */
@@ -192,7 +221,7 @@ void __init config_mac(void)
  * inaccurate, so look here if a new Mac model won't run. Example: if
  * a Mac crashes immediately after the VIA1 registers have been dumped
  * to the screen, it probably died attempting to read DirB on a RBV.
- * Meaning it should have MAC_VIA_IIci here :-)
+ * Meaning it should have MAC_VIA_IICI here :-)
  */
 
 struct mac_model *macintosh_config;
@@ -267,7 +296,7 @@ static struct mac_model mac_data_table[] = {
 		.ident		= MAC_MODEL_IICI,
 		.name		= "IIci",
 		.adb_type	= MAC_ADB_II,
-		.via_type	= MAC_VIA_IIci,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
@@ -276,7 +305,7 @@ static struct mac_model mac_data_table[] = {
 		.ident		= MAC_MODEL_IIFX,
 		.name		= "IIfx",
 		.adb_type	= MAC_ADB_IOP,
-		.via_type	= MAC_VIA_IIci,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_IOP,
 		.nubus_type	= MAC_NUBUS,
@@ -285,7 +314,7 @@ static struct mac_model mac_data_table[] = {
 		.ident		= MAC_MODEL_IISI,
 		.name		= "IIsi",
 		.adb_type	= MAC_ADB_IISI,
-		.via_type	= MAC_VIA_IIci,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
@@ -294,7 +323,7 @@ static struct mac_model mac_data_table[] = {
 		.ident		= MAC_MODEL_IIVI,
 		.name		= "IIvi",
 		.adb_type	= MAC_ADB_IISI,
-		.via_type	= MAC_VIA_IIci,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
@@ -303,7 +332,7 @@ static struct mac_model mac_data_table[] = {
 		.ident		= MAC_MODEL_IIVX,
 		.name		= "IIvx",
 		.adb_type	= MAC_ADB_IISI,
-		.via_type	= MAC_VIA_IIci,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
@@ -318,7 +347,7 @@ static struct mac_model mac_data_table[] = {
 		.ident		= MAC_MODEL_CLII,
 		.name		= "Classic II",
 		.adb_type	= MAC_ADB_IISI,
-		.via_type	= MAC_VIA_IIci,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
@@ -327,7 +356,7 @@ static struct mac_model mac_data_table[] = {
 		.ident		= MAC_MODEL_CCL,
 		.name		= "Color Classic",
 		.adb_type	= MAC_ADB_CUDA,
-		.via_type	= MAC_VIA_IIci,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
@@ -336,7 +365,7 @@ static struct mac_model mac_data_table[] = {
 		.ident		= MAC_MODEL_CCLII,
 		.name		= "Color Classic II",
 		.adb_type	= MAC_ADB_CUDA,
-		.via_type	= MAC_VIA_IIci,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
@@ -351,7 +380,7 @@ static struct mac_model mac_data_table[] = {
 		.ident		= MAC_MODEL_LC,
 		.name		= "LC",
 		.adb_type	= MAC_ADB_IISI,
-		.via_type	= MAC_VIA_IIci,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
@@ -360,7 +389,7 @@ static struct mac_model mac_data_table[] = {
 		.ident		= MAC_MODEL_LCII,
 		.name		= "LC II",
 		.adb_type	= MAC_ADB_IISI,
-		.via_type	= MAC_VIA_IIci,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
@@ -369,7 +398,7 @@ static struct mac_model mac_data_table[] = {
 		.ident		= MAC_MODEL_LCIII,
 		.name		= "LC III",
 		.adb_type	= MAC_ADB_IISI,
-		.via_type	= MAC_VIA_IIci,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
@@ -497,7 +526,7 @@ static struct mac_model mac_data_table[] = {
 		.ident		= MAC_MODEL_P460,
 		.name		= "Performa 460",
 		.adb_type	= MAC_ADB_IISI,
-		.via_type	= MAC_VIA_IIci,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
@@ -524,7 +553,7 @@ static struct mac_model mac_data_table[] = {
 		.ident		= MAC_MODEL_P520,
 		.name		= "Performa 520",
 		.adb_type	= MAC_ADB_CUDA,
-		.via_type	= MAC_VIA_IIci,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
@@ -533,7 +562,7 @@ static struct mac_model mac_data_table[] = {
 		.ident		= MAC_MODEL_P550,
 		.name		= "Performa 550",
 		.adb_type	= MAC_ADB_CUDA,
-		.via_type	= MAC_VIA_IIci,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
@@ -565,7 +594,7 @@ static struct mac_model mac_data_table[] = {
 		.ident		= MAC_MODEL_TV,
 		.name		= "TV",
 		.adb_type	= MAC_ADB_CUDA,
-		.via_type	= MAC_VIA_QUADRA,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
@@ -574,7 +603,7 @@ static struct mac_model mac_data_table[] = {
 		.ident		= MAC_MODEL_P600,
 		.name		= "Performa 600",
 		.adb_type	= MAC_ADB_IISI,
-		.via_type	= MAC_VIA_IIci,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
@@ -645,8 +674,8 @@ static struct mac_model mac_data_table[] = {
 	}, {
 		.ident		= MAC_MODEL_PB150,
 		.name		= "PowerBook 150",
-		.adb_type	= MAC_ADB_PB1,
-		.via_type	= MAC_VIA_IIci,
+		.adb_type	= MAC_ADB_PB2,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.ide_type	= MAC_IDE_PB,
 		.scc_type	= MAC_SCC_QUADRA,
@@ -732,17 +761,13 @@ static struct mac_model mac_data_table[] = {
 	 * PowerBook Duos are pretty much like normal PowerBooks
 	 * All of these probably have onboard SONIC in the Dock which
 	 * means we'll have to probe for it eventually.
-	 *
-	 * Are these really MAC_VIA_IIci? The developer notes for the
-	 * Duos show pretty much the same custom parts as in most of
-	 * the other PowerBooks which would imply MAC_VIA_QUADRA.
 	 */
 
 	{
 		.ident		= MAC_MODEL_PB210,
 		.name		= "PowerBook Duo 210",
 		.adb_type	= MAC_ADB_PB2,
-		.via_type	= MAC_VIA_IIci,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_QUADRA,
 		.nubus_type	= MAC_NUBUS,
@@ -751,7 +776,7 @@ static struct mac_model mac_data_table[] = {
 		.ident		= MAC_MODEL_PB230,
 		.name		= "PowerBook Duo 230",
 		.adb_type	= MAC_ADB_PB2,
-		.via_type	= MAC_VIA_IIci,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_QUADRA,
 		.nubus_type	= MAC_NUBUS,
@@ -760,7 +785,7 @@ static struct mac_model mac_data_table[] = {
 		.ident		= MAC_MODEL_PB250,
 		.name		= "PowerBook Duo 250",
 		.adb_type	= MAC_ADB_PB2,
-		.via_type	= MAC_VIA_IIci,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_QUADRA,
 		.nubus_type	= MAC_NUBUS,
@@ -769,7 +794,7 @@ static struct mac_model mac_data_table[] = {
 		.ident		= MAC_MODEL_PB270C,
 		.name		= "PowerBook Duo 270c",
 		.adb_type	= MAC_ADB_PB2,
-		.via_type	= MAC_VIA_IIci,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_QUADRA,
 		.nubus_type	= MAC_NUBUS,
@@ -778,7 +803,7 @@ static struct mac_model mac_data_table[] = {
 		.ident		= MAC_MODEL_PB280,
 		.name		= "PowerBook Duo 280",
 		.adb_type	= MAC_ADB_PB2,
-		.via_type	= MAC_VIA_IIci,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_QUADRA,
 		.nubus_type	= MAC_NUBUS,
@@ -787,7 +812,7 @@ static struct mac_model mac_data_table[] = {
 		.ident		= MAC_MODEL_PB280C,
 		.name		= "PowerBook Duo 280c",
 		.adb_type	= MAC_ADB_PB2,
-		.via_type	= MAC_VIA_IIci,
+		.via_type	= MAC_VIA_IICI,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_QUADRA,
 		.nubus_type	= MAC_NUBUS,
@@ -864,8 +889,14 @@ static void __init mac_identify(void)
 		scc_b_rsrcs[1].start = scc_b_rsrcs[1].end = IRQ_MAC_SCC_B;
 		break;
 	default:
-		scc_a_rsrcs[1].start = scc_a_rsrcs[1].end = IRQ_MAC_SCC;
-		scc_b_rsrcs[1].start = scc_b_rsrcs[1].end = IRQ_MAC_SCC;
+		/* On non-PSC machines, the serial ports share an IRQ. */
+		if (macintosh_config->ident == MAC_MODEL_IIFX) {
+			scc_a_rsrcs[1].start = scc_a_rsrcs[1].end = IRQ_MAC_SCC;
+			scc_b_rsrcs[1].start = scc_b_rsrcs[1].end = IRQ_MAC_SCC;
+		} else {
+			scc_a_rsrcs[1].start = scc_a_rsrcs[1].end = IRQ_AUTO_4;
+			scc_b_rsrcs[1].start = scc_b_rsrcs[1].end = IRQ_AUTO_4;
+		}
 		break;
 	}
 
diff --git a/arch/m68k/mac/iop.c b/arch/m68k/mac/iop.c
index a5462cc..7d8d461 100644
--- a/arch/m68k/mac/iop.c
+++ b/arch/m68k/mac/iop.c
@@ -115,7 +115,6 @@
 #include <asm/macintosh.h>
 #include <asm/macints.h>
 #include <asm/mac_iop.h>
-#include <asm/mac_oss.h>
 
 /*#define DEBUG_IOP*/
 
@@ -149,8 +148,6 @@ static struct listener iop_listeners[NUM_IOPS][NUM_IOP_CHAN];
 
 irqreturn_t iop_ism_irq(int, void *);
 
-extern void oss_irq_enable(int);
-
 /*
  * Private access functions
  */
@@ -304,11 +301,10 @@ void __init iop_init(void)
 void __init iop_register_interrupts(void)
 {
 	if (iop_ism_present) {
-		if (oss_present) {
-			if (request_irq(OSS_IRQLEV_IOPISM, iop_ism_irq, 0,
+		if (macintosh_config->ident == MAC_MODEL_IIFX) {
+			if (request_irq(IRQ_MAC_ADB, iop_ism_irq, 0,
 					"ISM IOP", (void *)IOP_NUM_ISM))
 				pr_err("Couldn't register ISM IOP interrupt\n");
-			oss_irq_enable(IRQ_MAC_ADB);
 		} else {
 			if (request_irq(IRQ_VIA2_0, iop_ism_irq, 0, "ISM IOP",
 					(void *)IOP_NUM_ISM))
diff --git a/arch/m68k/mac/macints.c b/arch/m68k/mac/macints.c
index ba220b7..5c1a6b2 100644
--- a/arch/m68k/mac/macints.c
+++ b/arch/m68k/mac/macints.c
@@ -26,10 +26,6 @@
  *		  - slot 6: timer 1 (not on IIci)
  *		  - slot 7: status of IRQ; signals 'any enabled int.'
  *
- *	2	- OSS (IIfx only?)
- *		  - slot 0: SCSI interrupt
- *		  - slot 1: Sound interrupt
- *
  * Levels 3-6 vary by machine type. For VIA or RBV Macintoshes:
  *
  *	3	- unused (?)
@@ -42,21 +38,30 @@
  *
  *	6	- off switch (?)
  *
- * For OSS Macintoshes (IIfx only at this point):
+ * Machines with Quadra-like VIA hardware, except PSC and PMU machines, support
+ * an alternate interrupt mapping, as used by A/UX. It spreads ethernet and
+ * sound out to their own autovector IRQs and gives VIA1 a higher priority:
  *
- *	3	- Nubus interrupt
- *		  - slot 0: Slot $9
- *		  - slot 1: Slot $A
- *		  - slot 2: Slot $B
- *		  - slot 3: Slot $C
- *		  - slot 4: Slot $D
- *		  - slot 5: Slot $E
+ *	1	- unused (?)
  *
- *	4	- SCC IOP
+ *	3	- on-board SONIC
+ *
+ *	5	- Apple Sound Chip (ASC)
+ *
+ *	6	- VIA1
+ *
+ * For OSS Macintoshes (IIfx only), we apply an interrupt mapping similar to
+ * the Quadra (A/UX) mapping:
+ *
+ *	1	- ISM IOP (ADB)
  *
- *	5	- ISM IOP (ADB?)
+ *	2	- SCSI
  *
- *	6	- unused
+ *	3	- NuBus
+ *
+ *	4	- SCC IOP
+ *
+ *	6	- VIA1
  *
  * For PSC Macintoshes (660AV, 840AV):
  *
@@ -100,88 +105,29 @@
  *   case. They're hidden behind the Nubus slot $C interrupt thus adding a
  *   third layer of indirection. Why oh why did the Apple engineers do that?
  *
- * - We support "fast" and "slow" handlers, just like the Amiga port. The
- *   fast handlers are called first and with all interrupts disabled. They
- *   are expected to execute quickly (hence the name). The slow handlers are
- *   called last with interrupts enabled and the interrupt level restored.
- *   They must therefore be reentrant.
- *
- *   TODO:
- *
  */
 
-#include <linux/module.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
-#include <linux/kernel_stat.h>
-#include <linux/interrupt.h> /* for intr_count */
+#include <linux/interrupt.h>
+#include <linux/irq.h>
 #include <linux/delay.h>
-#include <linux/seq_file.h>
 
-#include <asm/system.h>
 #include <asm/irq.h>
-#include <asm/traps.h>
-#include <asm/bootinfo.h>
 #include <asm/macintosh.h>
+#include <asm/macints.h>
 #include <asm/mac_via.h>
 #include <asm/mac_psc.h>
+#include <asm/mac_oss.h>
+#include <asm/mac_iop.h>
+#include <asm/mac_baboon.h>
 #include <asm/hwtest.h>
-#include <asm/errno.h>
-#include <asm/macints.h>
 #include <asm/irq_regs.h>
-#include <asm/mac_oss.h>
 
 #define SHUTUP_SONIC
 
 /*
- * VIA/RBV hooks
- */
-
-extern void via_register_interrupts(void);
-extern void via_irq_enable(int);
-extern void via_irq_disable(int);
-extern void via_irq_clear(int);
-extern int  via_irq_pending(int);
-
-/*
- * OSS hooks
- */
-
-extern void oss_register_interrupts(void);
-extern void oss_irq_enable(int);
-extern void oss_irq_disable(int);
-extern void oss_irq_clear(int);
-extern int  oss_irq_pending(int);
-
-/*
- * PSC hooks
- */
-
-extern void psc_register_interrupts(void);
-extern void psc_irq_enable(int);
-extern void psc_irq_disable(int);
-extern void psc_irq_clear(int);
-extern int  psc_irq_pending(int);
-
-/*
- * IOP hooks
- */
-
-extern void iop_register_interrupts(void);
-
-/*
- * Baboon hooks
- */
-
-extern int baboon_present;
-
-extern void baboon_register_interrupts(void);
-extern void baboon_irq_enable(int);
-extern void baboon_irq_disable(int);
-extern void baboon_irq_clear(int);
-
-/*
  * console_loglevel determines NMI handler function
  */
 
@@ -190,10 +136,15 @@ irqreturn_t mac_debug_handler(int, void *);
 
 /* #define DEBUG_MACINTS */
 
+static unsigned int mac_irq_startup(struct irq_data *);
+static void mac_irq_shutdown(struct irq_data *);
+
 static struct irq_chip mac_irq_chip = {
 	.name		= "mac",
 	.irq_enable	= mac_irq_enable,
 	.irq_disable	= mac_irq_disable,
+	.irq_startup	= mac_irq_startup,
+	.irq_shutdown	= mac_irq_shutdown,
 };
 
 void __init mac_init_IRQ(void)
@@ -239,8 +190,6 @@ void __init mac_init_IRQ(void)
 /*
  *  mac_irq_enable - enable an interrupt source
  * mac_irq_disable - disable an interrupt source
- *   mac_clear_irq - clears a pending interrupt
- * mac_irq_pending - returns the pending status of an IRQ (nonzero = pending)
  *
  * These routines are just dispatchers to the VIA/OSS/PSC routines.
  */
@@ -252,8 +201,6 @@ void mac_irq_enable(struct irq_data *data)
 
 	switch(irq_src) {
 	case 1:
-		via_irq_enable(irq);
-		break;
 	case 2:
 	case 7:
 		if (oss_present)
@@ -262,6 +209,7 @@ void mac_irq_enable(struct irq_data *data)
 			via_irq_enable(irq);
 		break;
 	case 3:
+	case 4:
 	case 5:
 	case 6:
 		if (psc_present)
@@ -269,10 +217,6 @@ void mac_irq_enable(struct irq_data *data)
 		else if (oss_present)
 			oss_irq_enable(irq);
 		break;
-	case 4:
-		if (psc_present)
-			psc_irq_enable(irq);
-		break;
 	case 8:
 		if (baboon_present)
 			baboon_irq_enable(irq);
@@ -287,8 +231,6 @@ void mac_irq_disable(struct irq_data *data)
 
 	switch(irq_src) {
 	case 1:
-		via_irq_disable(irq);
-		break;
 	case 2:
 	case 7:
 		if (oss_present)
@@ -297,6 +239,7 @@ void mac_irq_disable(struct irq_data *data)
 			via_irq_disable(irq);
 		break;
 	case 3:
+	case 4:
 	case 5:
 	case 6:
 		if (psc_present)
@@ -304,10 +247,6 @@ void mac_irq_disable(struct irq_data *data)
 		else if (oss_present)
 			oss_irq_disable(irq);
 		break;
-	case 4:
-		if (psc_present)
-			psc_irq_disable(irq);
-		break;
 	case 8:
 		if (baboon_present)
 			baboon_irq_disable(irq);
@@ -315,65 +254,27 @@ void mac_irq_disable(struct irq_data *data)
 	}
 }
 
-void mac_clear_irq(unsigned int irq)
+static unsigned int mac_irq_startup(struct irq_data *data)
 {
-	switch(IRQ_SRC(irq)) {
-	case 1:
-		via_irq_clear(irq);
-		break;
-	case 2:
-	case 7:
-		if (oss_present)
-			oss_irq_clear(irq);
-		else
-			via_irq_clear(irq);
-		break;
-	case 3:
-	case 5:
-	case 6:
-		if (psc_present)
-			psc_irq_clear(irq);
-		else if (oss_present)
-			oss_irq_clear(irq);
-		break;
-	case 4:
-		if (psc_present)
-			psc_irq_clear(irq);
-		break;
-	case 8:
-		if (baboon_present)
-			baboon_irq_clear(irq);
-		break;
-	}
+	int irq = data->irq;
+
+	if (IRQ_SRC(irq) == 7 && !oss_present)
+		via_nubus_irq_startup(irq);
+	else
+		mac_irq_enable(data);
+
+	return 0;
 }
 
-int mac_irq_pending(unsigned int irq)
+static void mac_irq_shutdown(struct irq_data *data)
 {
-	switch(IRQ_SRC(irq)) {
-	case 1:
-		return via_irq_pending(irq);
-	case 2:
-	case 7:
-		if (oss_present)
-			return oss_irq_pending(irq);
-		else
-			return via_irq_pending(irq);
-	case 3:
-	case 5:
-	case 6:
-		if (psc_present)
-			return psc_irq_pending(irq);
-		else if (oss_present)
-			return oss_irq_pending(irq);
-		break;
-	case 4:
-		if (psc_present)
-			return psc_irq_pending(irq);
-		break;
-	}
-	return 0;
+	int irq = data->irq;
+
+	if (IRQ_SRC(irq) == 7 && !oss_present)
+		via_nubus_irq_shutdown(irq);
+	else
+		mac_irq_disable(data);
 }
-EXPORT_SYMBOL(mac_irq_pending);
 
 static int num_debug[8];
 
diff --git a/arch/m68k/mac/oss.c b/arch/m68k/mac/oss.c
index a4c82da..6c4c882 100644
--- a/arch/m68k/mac/oss.c
+++ b/arch/m68k/mac/oss.c
@@ -1,5 +1,5 @@
 /*
- *	OSS handling
+ *	Operating System Services (OSS) chip handling
  *	Written by Joshua M. Thompson (funaho@jurai.org)
  *
  *
@@ -30,8 +30,6 @@
 int oss_present;
 volatile struct mac_oss *oss;
 
-extern void via1_irq(unsigned int irq, struct irq_desc *desc);
-
 /*
  * Initialize the OSS
  *
@@ -51,10 +49,8 @@ void __init oss_init(void)
 	/* do this by setting the source's interrupt level to zero. */
 
 	for (i = 0; i <= OSS_NUM_SOURCES; i++) {
-		oss->irq_level[i] = OSS_IRQLEV_DISABLED;
+		oss->irq_level[i] = 0;
 	}
-	/* If we disable VIA1 here, we never really handle it... */
-	oss->irq_level[OSS_VIA1] = OSS_IRQLEV_VIA1;
 }
 
 /*
@@ -66,17 +62,13 @@ void __init oss_nubus_init(void)
 }
 
 /*
- * Handle miscellaneous OSS interrupts. Right now that's just sound
- * and SCSI; everything else is routed to its own autovector IRQ.
+ * Handle miscellaneous OSS interrupts.
  */
 
 static void oss_irq(unsigned int irq, struct irq_desc *desc)
 {
-	int events;
-
-	events = oss->irq_pending & (OSS_IP_SOUND|OSS_IP_SCSI);
-	if (!events)
-		return;
+	int events = oss->irq_pending &
+	             (OSS_IP_IOPSCC | OSS_IP_SCSI | OSS_IP_IOPISM);
 
 #ifdef DEBUG_IRQS
 	if ((console_loglevel == 10) && !(events & OSS_IP_SCSI)) {
@@ -84,16 +76,20 @@ static void oss_irq(unsigned int irq, struct irq_desc *desc)
 			(int) oss->irq_pending);
 	}
 #endif
-	/* FIXME: how do you clear a pending IRQ?    */
 
-	if (events & OSS_IP_SOUND) {
-		oss->irq_pending &= ~OSS_IP_SOUND;
-		/* FIXME: call sound handler */
-	} else if (events & OSS_IP_SCSI) {
+	if (events & OSS_IP_IOPSCC) {
+		oss->irq_pending &= ~OSS_IP_IOPSCC;
+		generic_handle_irq(IRQ_MAC_SCC);
+	}
+
+	if (events & OSS_IP_SCSI) {
 		oss->irq_pending &= ~OSS_IP_SCSI;
 		generic_handle_irq(IRQ_MAC_SCSI);
-	} else {
-		/* FIXME: error check here? */
+	}
+
+	if (events & OSS_IP_IOPISM) {
+		oss->irq_pending &= ~OSS_IP_IOPISM;
+		generic_handle_irq(IRQ_MAC_ADB);
 	}
 }
 
@@ -132,14 +128,29 @@ static void oss_nubus_irq(unsigned int irq, struct irq_desc *desc)
 
 /*
  * Register the OSS and NuBus interrupt dispatchers.
+ *
+ * This IRQ mapping is laid out with two things in mind: first, we try to keep
+ * things on their own levels to avoid having to do double-dispatches. Second,
+ * the levels match as closely as possible the alternate IRQ mapping mode (aka
+ * "A/UX mode") available on some VIA machines.
  */
 
+#define OSS_IRQLEV_IOPISM    IRQ_AUTO_1
+#define OSS_IRQLEV_SCSI      IRQ_AUTO_2
+#define OSS_IRQLEV_NUBUS     IRQ_AUTO_3
+#define OSS_IRQLEV_IOPSCC    IRQ_AUTO_4
+#define OSS_IRQLEV_VIA1      IRQ_AUTO_6
+
 void __init oss_register_interrupts(void)
 {
-	irq_set_chained_handler(OSS_IRQLEV_SCSI, oss_irq);
-	irq_set_chained_handler(OSS_IRQLEV_NUBUS, oss_nubus_irq);
-	irq_set_chained_handler(OSS_IRQLEV_SOUND, oss_irq);
-	irq_set_chained_handler(OSS_IRQLEV_VIA1, via1_irq);
+	irq_set_chained_handler(OSS_IRQLEV_IOPISM, oss_irq);
+	irq_set_chained_handler(OSS_IRQLEV_SCSI,   oss_irq);
+	irq_set_chained_handler(OSS_IRQLEV_NUBUS,  oss_nubus_irq);
+	irq_set_chained_handler(OSS_IRQLEV_IOPSCC, oss_irq);
+	irq_set_chained_handler(OSS_IRQLEV_VIA1,   via1_irq);
+
+	/* OSS_VIA1 gets enabled here because it has no machspec interrupt. */
+	oss->irq_level[OSS_VIA1] = IRQ_AUTO_6;
 }
 
 /*
@@ -158,13 +169,13 @@ void oss_irq_enable(int irq) {
 	switch(irq) {
 		case IRQ_MAC_SCC:
 			oss->irq_level[OSS_IOPSCC] = OSS_IRQLEV_IOPSCC;
-			break;
+			return;
 		case IRQ_MAC_ADB:
 			oss->irq_level[OSS_IOPISM] = OSS_IRQLEV_IOPISM;
-			break;
+			return;
 		case IRQ_MAC_SCSI:
 			oss->irq_level[OSS_SCSI] = OSS_IRQLEV_SCSI;
-			break;
+			return;
 		case IRQ_NUBUS_9:
 		case IRQ_NUBUS_A:
 		case IRQ_NUBUS_B:
@@ -173,13 +184,11 @@ void oss_irq_enable(int irq) {
 		case IRQ_NUBUS_E:
 			irq -= NUBUS_SOURCE_BASE;
 			oss->irq_level[irq] = OSS_IRQLEV_NUBUS;
-			break;
-#ifdef DEBUG_IRQUSE
-		default:
-			printk("%s unknown irq %d\n", __func__, irq);
-			break;
-#endif
+			return;
 	}
+
+	if (IRQ_SRC(irq) == 1)
+		via_irq_enable(irq);
 }
 
 /*
@@ -195,50 +204,14 @@ void oss_irq_disable(int irq) {
 #endif
 	switch(irq) {
 		case IRQ_MAC_SCC:
-			oss->irq_level[OSS_IOPSCC] = OSS_IRQLEV_DISABLED;
-			break;
-		case IRQ_MAC_ADB:
-			oss->irq_level[OSS_IOPISM] = OSS_IRQLEV_DISABLED;
-			break;
-		case IRQ_MAC_SCSI:
-			oss->irq_level[OSS_SCSI] = OSS_IRQLEV_DISABLED;
-			break;
-		case IRQ_NUBUS_9:
-		case IRQ_NUBUS_A:
-		case IRQ_NUBUS_B:
-		case IRQ_NUBUS_C:
-		case IRQ_NUBUS_D:
-		case IRQ_NUBUS_E:
-			irq -= NUBUS_SOURCE_BASE;
-			oss->irq_level[irq] = OSS_IRQLEV_DISABLED;
-			break;
-#ifdef DEBUG_IRQUSE
-		default:
-			printk("%s unknown irq %d\n", __func__, irq);
-			break;
-#endif
-	}
-}
-
-/*
- * Clear an OSS interrupt
- *
- * Not sure if this works or not but it's the only method I could
- * think of based on the contents of the mac_oss structure.
- */
-
-void oss_irq_clear(int irq) {
-	/* FIXME: how to do this on OSS? */
-	switch(irq) {
-		case IRQ_MAC_SCC:
-			oss->irq_pending &= ~OSS_IP_IOPSCC;
-			break;
+			oss->irq_level[OSS_IOPSCC] = 0;
+			return;
 		case IRQ_MAC_ADB:
-			oss->irq_pending &= ~OSS_IP_IOPISM;
-			break;
+			oss->irq_level[OSS_IOPISM] = 0;
+			return;
 		case IRQ_MAC_SCSI:
-			oss->irq_pending &= ~OSS_IP_SCSI;
-			break;
+			oss->irq_level[OSS_SCSI] = 0;
+			return;
 		case IRQ_NUBUS_9:
 		case IRQ_NUBUS_A:
 		case IRQ_NUBUS_B:
@@ -246,36 +219,10 @@ void oss_irq_clear(int irq) {
 		case IRQ_NUBUS_D:
 		case IRQ_NUBUS_E:
 			irq -= NUBUS_SOURCE_BASE;
-			oss->irq_pending &= ~(1 << irq);
-			break;
+			oss->irq_level[irq] = 0;
+			return;
 	}
-}
-
-/*
- * Check to see if a specific OSS interrupt is pending
- */
 
-int oss_irq_pending(int irq)
-{
-	switch(irq) {
-		case IRQ_MAC_SCC:
-			return oss->irq_pending & OSS_IP_IOPSCC;
-			break;
-		case IRQ_MAC_ADB:
-			return oss->irq_pending & OSS_IP_IOPISM;
-			break;
-		case IRQ_MAC_SCSI:
-			return oss->irq_pending & OSS_IP_SCSI;
-			break;
-		case IRQ_NUBUS_9:
-		case IRQ_NUBUS_A:
-		case IRQ_NUBUS_B:
-		case IRQ_NUBUS_C:
-		case IRQ_NUBUS_D:
-		case IRQ_NUBUS_E:
-			irq -= NUBUS_SOURCE_BASE;
-			return oss->irq_pending & (1 << irq);
-			break;
-	}
-	return 0;
+	if (IRQ_SRC(irq) == 1)
+		via_irq_disable(irq);
 }
diff --git a/arch/m68k/mac/psc.c b/arch/m68k/mac/psc.c
index e6c2d20..6f026fc 100644
--- a/arch/m68k/mac/psc.c
+++ b/arch/m68k/mac/psc.c
@@ -180,20 +180,3 @@ void psc_irq_disable(int irq) {
 #endif
 	psc_write_byte(pIER, 1 << irq_idx);
 }
-
-void psc_irq_clear(int irq) {
-	int irq_src	= IRQ_SRC(irq);
-	int irq_idx	= IRQ_IDX(irq);
-	int pIFR	= pIERbase + (irq_src << 4);
-
-	psc_write_byte(pIFR, 1 << irq_idx);
-}
-
-int psc_irq_pending(int irq)
-{
-	int irq_src	= IRQ_SRC(irq);
-	int irq_idx	= IRQ_IDX(irq);
-	int pIFR	= pIERbase + (irq_src << 4);
-
-	return psc_read_byte(pIFR) & (1 << irq_idx);
-}
diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c
index f1600ad..2d85662 100644
--- a/arch/m68k/mac/via.c
+++ b/arch/m68k/mac/via.c
@@ -63,24 +63,50 @@ static int gIER,gIFR,gBufA,gBufB;
 #define MAC_CLOCK_LOW		(MAC_CLOCK_TICK&0xFF)
 #define MAC_CLOCK_HIGH		(MAC_CLOCK_TICK>>8)
 
-/* To disable a NuBus slot on Quadras we make that slot IRQ line an output set
- * high. On RBV we just use the slot interrupt enable register. On Macs with
- * genuine VIA chips we must use nubus_disabled to keep track of disabled slot
- * interrupts. When any slot IRQ is disabled we mask the (edge triggered) CA1
- * or "SLOTS" interrupt. When no slot is disabled, we unmask the CA1 interrupt.
- * So, on genuine VIAs, having more than one NuBus IRQ can mean trouble,
- * because closing one of those drivers can mask all of the NuBus interrupts.
- * Also, since we can't mask the unregistered slot IRQs on genuine VIAs, it's
- * possible to get interrupts from cards that MacOS or the ROM has configured
- * but we have not. FWIW, "Designing Cards and Drivers for Macintosh II and
- * Macintosh SE", page 9-8, says, a slot IRQ with no driver would crash MacOS.
+
+/*
+ * On Macs with a genuine VIA chip there is no way to mask an individual slot
+ * interrupt. This limitation also seems to apply to VIA clone logic cores in
+ * Quadra-like ASICs. (RBV and OSS machines don't have this limitation.)
+ *
+ * We used to fake it by configuring the relevent VIA pin as an output
+ * (to mask the interrupt) or input (to unmask). That scheme did not work on
+ * (at least) the Quadra 700. A NuBus card's /NMRQ signal is an open-collector
+ * circuit (see Designing Cards and Drivers for Macintosh II and Macintosh SE,
+ * p. 10-11 etc) but VIA outputs are not (see datasheet).
+ *
+ * Driving these outputs high must cause the VIA to source current and the
+ * card to sink current when it asserts /NMRQ. Current will flow but the pin
+ * voltage is uncertain and so the /NMRQ condition may still cause a transition
+ * at the VIA2 CA1 input (which explains the lost interrupts). A side effect
+ * is that a disabled slot IRQ can never be tested as pending or not.
+ *
+ * Driving these outputs low doesn't work either. All the slot /NMRQ lines are
+ * (active low) OR'd together to generate the CA1 (aka "SLOTS") interrupt (see
+ * The Guide To Macintosh Family Hardware, 2nd edition p. 167). If we drive a
+ * disabled /NMRQ line low, the falling edge immediately triggers a CA1
+ * interrupt and all slot interrupts after that will generate no transition
+ * and therefore no interrupt, even after being re-enabled.
+ *
+ * So we make the VIA port A I/O lines inputs and use nubus_disabled to keep
+ * track of their states. When any slot IRQ becomes disabled we mask the CA1
+ * umbrella interrupt. Only when all slot IRQs become enabled do we unmask
+ * the CA1 interrupt. It must remain enabled even when cards have no interrupt
+ * handler registered. Drivers must therefore disable a slot interrupt at the
+ * device before they call free_irq (like shared and autovector interrupts).
+ *
+ * There is also a related problem when MacOS is used to boot Linux. A network
+ * card brought up by a MacOS driver may raise an interrupt while Linux boots.
+ * This can be fatal since it can't be handled until the right driver loads
+ * (if such a driver exists at all). Apparently related to this hardware
+ * limitation, "Designing Cards and Drivers", p. 9-8, says that a slot
+ * interrupt with no driver would crash MacOS (the book was written before
+ * the appearance of Macs with RBV or OSS).
  */
+
 static u8 nubus_disabled;
 
 void via_debug_dump(void);
-void via_irq_enable(int irq);
-void via_irq_disable(int irq);
-void via_irq_clear(int irq);
 
 /*
  * Initialize the VIAs
@@ -100,7 +126,7 @@ void __init via_init(void)
 
 		/* IIci, IIsi, IIvx, IIvi (P6xx), LC series */
 
-		case MAC_VIA_IIci:
+		case MAC_VIA_IICI:
 			via1 = (void *) VIA1_BASE;
 			if (macintosh_config->ident == MAC_MODEL_IIFX) {
 				via2 = NULL;
@@ -197,38 +223,17 @@ void __init via_init(void)
 	if (oss_present)
 		return;
 
-	/* Some machines support an alternate IRQ mapping that spreads  */
-	/* Ethernet and Sound out to their own autolevel IRQs and moves */
-	/* VIA1 to level 6. A/UX uses this mapping and we do too.  Note */
-	/* that the IIfx emulates this alternate mapping using the OSS. */
-
-	via_alt_mapping = 0;
-	if (macintosh_config->via_type == MAC_VIA_QUADRA)
-		switch (macintosh_config->ident) {
-		case MAC_MODEL_C660:
-		case MAC_MODEL_Q840:
-			/* not applicable */
-			break;
-		case MAC_MODEL_P588:
-		case MAC_MODEL_TV:
-		case MAC_MODEL_PB140:
-		case MAC_MODEL_PB145:
-		case MAC_MODEL_PB160:
-		case MAC_MODEL_PB165:
-		case MAC_MODEL_PB165C:
-		case MAC_MODEL_PB170:
-		case MAC_MODEL_PB180:
-		case MAC_MODEL_PB180C:
-		case MAC_MODEL_PB190:
-		case MAC_MODEL_PB520:
-			/* not yet tested */
-			break;
-		default:
-			via_alt_mapping = 1;
-			via1[vDirB] |= 0x40;
-			via1[vBufB] &= ~0x40;
-			break;
-		}
+	if ((macintosh_config->via_type == MAC_VIA_QUADRA) &&
+	    (macintosh_config->adb_type != MAC_ADB_PB1) &&
+	    (macintosh_config->adb_type != MAC_ADB_PB2) &&
+	    (macintosh_config->ident    != MAC_MODEL_C660) &&
+	    (macintosh_config->ident    != MAC_MODEL_Q840)) {
+		via_alt_mapping = 1;
+		via1[vDirB] |= 0x40;
+		via1[vBufB] &= ~0x40;
+	} else {
+		via_alt_mapping = 0;
+	}
 
 	/*
 	 * Now initialize VIA2. For RBV we just kill all interrupts;
@@ -248,22 +253,28 @@ void __init via_init(void)
 		via2[vACR] &= ~0x03; /* disable port A & B latches */
 	}
 
+	/* Everything below this point is VIA2 only... */
+
+	if (rbv_present)
+		return;
+
 	/*
-	 * Set vPCR for control line interrupts (but not on RBV)
+	 * Set vPCR for control line interrupts.
+	 *
+	 * CA1 (SLOTS IRQ), CB1 (ASC IRQ): negative edge trigger.
+	 *
+	 * Macs with ESP SCSI have a negative edge triggered SCSI interrupt.
+	 * Testing reveals that PowerBooks do too. However, the SE/30
+	 * schematic diagram shows an active high NCR5380 IRQ line.
 	 */
-	if (!rbv_present) {
-		/* For all VIA types, CA1 (SLOTS IRQ) and CB1 (ASC IRQ)
-		 * are made negative edge triggered here.
-		 */
-		if (macintosh_config->scsi_type == MAC_SCSI_OLD) {
-			/* CB2 (IRQ) indep. input, positive edge */
-			/* CA2 (DRQ) indep. input, positive edge */
-			via2[vPCR] = 0x66;
-		} else {
-			/* CB2 (IRQ) indep. input, negative edge */
-			/* CA2 (DRQ) indep. input, negative edge */
-			via2[vPCR] = 0x22;
-		}
+
+	pr_debug("VIA2 vPCR is 0x%02X\n", via2[vPCR]);
+	if (macintosh_config->via_type == MAC_VIA_II) {
+		/* CA2 (SCSI DRQ), CB2 (SCSI IRQ): indep. input, pos. edge */
+		via2[vPCR] = 0x66;
+	} else {
+		/* CA2 (SCSI DRQ), CB2 (SCSI IRQ): indep. input, neg. edge */
+		via2[vPCR] = 0x22;
 	}
 }
 
@@ -378,34 +389,55 @@ void __init via_nubus_init(void)
 		via2[gBufB] |= 0x02;
 	}
 
-	/* Disable all the slot interrupts (where possible). */
+	/*
+	 * Disable the slot interrupts. On some hardware that's not possible.
+	 * On some hardware it's unclear what all of these I/O lines do.
+	 */
 
 	switch (macintosh_config->via_type) {
 	case MAC_VIA_II:
-		/* Just make the port A lines inputs. */
-		switch(macintosh_config->ident) {
-		case MAC_MODEL_II:
-		case MAC_MODEL_IIX:
-		case MAC_MODEL_IICX:
-		case MAC_MODEL_SE30:
-			/* The top two bits are RAM size outputs. */
-			via2[vDirA] &= 0xC0;
-			break;
-		default:
-			via2[vDirA] &= 0x80;
-		}
+	case MAC_VIA_QUADRA:
+		pr_debug("VIA2 vDirA is 0x%02X\n", via2[vDirA]);
 		break;
-	case MAC_VIA_IIci:
+	case MAC_VIA_IICI:
 		/* RBV. Disable all the slot interrupts. SIER works like IER. */
 		via2[rSIER] = 0x7F;
 		break;
+	}
+}
+
+void via_nubus_irq_startup(int irq)
+{
+	int irq_idx = IRQ_IDX(irq);
+
+	switch (macintosh_config->via_type) {
+	case MAC_VIA_II:
 	case MAC_VIA_QUADRA:
-		/* Disable the inactive slot interrupts by making those lines outputs. */
-		if ((macintosh_config->adb_type != MAC_ADB_PB1) &&
-		    (macintosh_config->adb_type != MAC_ADB_PB2)) {
-			via2[vBufA] |= 0x7F;
-			via2[vDirA] |= 0x7F;
+		/* Make the port A line an input. Probably redundant. */
+		if (macintosh_config->via_type == MAC_VIA_II) {
+			/* The top two bits are RAM size outputs. */
+			via2[vDirA] &= 0xC0 | ~(1 << irq_idx);
+		} else {
+			/* Allow NuBus slots 9 through F. */
+			via2[vDirA] &= 0x80 | ~(1 << irq_idx);
 		}
+		/* fall through */
+	case MAC_VIA_IICI:
+		via_irq_enable(irq);
+		break;
+	}
+}
+
+void via_nubus_irq_shutdown(int irq)
+{
+	switch (macintosh_config->via_type) {
+	case MAC_VIA_II:
+	case MAC_VIA_QUADRA:
+		/* Ensure that the umbrella CA1 interrupt remains enabled. */
+		via_irq_enable(irq);
+		break;
+	case MAC_VIA_IICI:
+		via_irq_disable(irq);
 		break;
 	}
 }
@@ -531,25 +563,18 @@ void via_irq_enable(int irq) {
 	} else if (irq_src == 7) {
 		switch (macintosh_config->via_type) {
 		case MAC_VIA_II:
+		case MAC_VIA_QUADRA:
 			nubus_disabled &= ~(1 << irq_idx);
 			/* Enable the CA1 interrupt when no slot is disabled. */
 			if (!nubus_disabled)
 				via2[gIER] = IER_SET_BIT(1);
 			break;
-		case MAC_VIA_IIci:
+		case MAC_VIA_IICI:
 			/* On RBV, enable the slot interrupt.
 			 * SIER works like IER.
 			 */
 			via2[rSIER] = IER_SET_BIT(irq_idx);
 			break;
-		case MAC_VIA_QUADRA:
-			/* Make the port A line an input to enable the slot irq.
-			 * But not on PowerBooks, that's ADB.
-			 */
-			if ((macintosh_config->adb_type != MAC_ADB_PB1) &&
-			    (macintosh_config->adb_type != MAC_ADB_PB2))
-				via2[vDirA] &= ~(1 << irq_idx);
-			break;
 		}
 	}
 }
@@ -569,60 +594,18 @@ void via_irq_disable(int irq) {
 	} else if (irq_src == 7) {
 		switch (macintosh_config->via_type) {
 		case MAC_VIA_II:
+		case MAC_VIA_QUADRA:
 			nubus_disabled |= 1 << irq_idx;
 			if (nubus_disabled)
 				via2[gIER] = IER_CLR_BIT(1);
 			break;
-		case MAC_VIA_IIci:
+		case MAC_VIA_IICI:
 			via2[rSIER] = IER_CLR_BIT(irq_idx);
 			break;
-		case MAC_VIA_QUADRA:
-			if ((macintosh_config->adb_type != MAC_ADB_PB1) &&
-			    (macintosh_config->adb_type != MAC_ADB_PB2))
-				via2[vDirA] |= 1 << irq_idx;
-			break;
 		}
 	}
 }
 
-void via_irq_clear(int irq) {
-	int irq_src	= IRQ_SRC(irq);
-	int irq_idx	= IRQ_IDX(irq);
-	int irq_bit	= 1 << irq_idx;
-
-	if (irq_src == 1) {
-		via1[vIFR] = irq_bit;
-	} else if (irq_src == 2) {
-		via2[gIFR] = irq_bit | rbv_clear;
-	} else if (irq_src == 7) {
-		/* FIXME: There is no way to clear an individual nubus slot
-		 * IRQ flag, other than getting the device to do it.
-		 */
-	}
-}
-
-/*
- * Returns nonzero if an interrupt is pending on the given
- * VIA/IRQ combination.
- */
-
-int via_irq_pending(int irq)
-{
-	int irq_src	= IRQ_SRC(irq);
-	int irq_idx	= IRQ_IDX(irq);
-	int irq_bit	= 1 << irq_idx;
-
-	if (irq_src == 1) {
-		return via1[vIFR] & irq_bit;
-	} else if (irq_src == 2) {
-		return via2[gIFR] & irq_bit;
-	} else if (irq_src == 7) {
-		/* Always 0 for MAC_VIA_QUADRA if the slot irq is disabled. */
-		return ~via2[gBufA] & irq_bit;
-	}
-	return 0;
-}
-
 void via1_set_head(int head)
 {
 	if (head == 0)
@@ -631,3 +614,9 @@ void via1_set_head(int head)
 		via1[vBufA] |= VIA1A_vHeadSel;
 }
 EXPORT_SYMBOL(via1_set_head);
+
+int via2_scsi_drq_pending(void)
+{
+	return via2[gIFR] & (1 << IRQ_IDX(IRQ_MAC_SCSIDRQ));
+}
+EXPORT_SYMBOL(via2_scsi_drq_pending);
diff --git a/arch/m68k/mm/Makefile b/arch/m68k/mm/Makefile
index 09cadf1..cfbf320 100644
--- a/arch/m68k/mm/Makefile
+++ b/arch/m68k/mm/Makefile
@@ -4,6 +4,8 @@
 
 obj-y	:= init.o
 
-obj-$(CONFIG_MMU)		+= cache.o fault.o hwtest.o
-obj-$(CONFIG_MMU_MOTOROLA)	+= kmap.o memory.o motorola.o
-obj-$(CONFIG_MMU_SUN3)		+= sun3kmap.o sun3mmu.o
+obj-$(CONFIG_MMU)		+= cache.o fault.o
+obj-$(CONFIG_MMU_MOTOROLA)	+= kmap.o memory.o motorola.o hwtest.o
+obj-$(CONFIG_MMU_SUN3)		+= sun3kmap.o sun3mmu.o hwtest.o
+obj-$(CONFIG_MMU_COLDFIRE)	+= kmap.o memory.o mcfmmu.o
+
diff --git a/arch/m68k/mm/cache.c b/arch/m68k/mm/cache.c
index 5437fff..95d0bf6 100644
--- a/arch/m68k/mm/cache.c
+++ b/arch/m68k/mm/cache.c
@@ -74,8 +74,16 @@ static unsigned long virt_to_phys_slow(unsigned long vaddr)
 /* RZ: use cpush %bc instead of cpush %dc, cinv %ic */
 void flush_icache_range(unsigned long address, unsigned long endaddr)
 {
-
-	if (CPU_IS_040_OR_060) {
+	if (CPU_IS_COLDFIRE) {
+		unsigned long start, end;
+		start = address & ICACHE_SET_MASK;
+		end = endaddr & ICACHE_SET_MASK;
+		if (start > end) {
+			flush_cf_icache(0, end);
+			end = ICACHE_MAX_ADDR;
+		}
+		flush_cf_icache(start, end);
+	} else if (CPU_IS_040_OR_060) {
 		address &= PAGE_MASK;
 
 		do {
@@ -100,7 +108,17 @@ EXPORT_SYMBOL(flush_icache_range);
 void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
 			     unsigned long addr, int len)
 {
-	if (CPU_IS_040_OR_060) {
+	if (CPU_IS_COLDFIRE) {
+		unsigned long start, end;
+		start = addr & ICACHE_SET_MASK;
+		end = (addr + len) & ICACHE_SET_MASK;
+		if (start > end) {
+			flush_cf_icache(0, end);
+			end = ICACHE_MAX_ADDR;
+		}
+		flush_cf_icache(start, end);
+
+	} else if (CPU_IS_040_OR_060) {
 		asm volatile ("nop\n\t"
 			      ".chip 68040\n\t"
 			      "cpushp %%bc,(%0)\n\t"
diff --git a/arch/m68k/mm/init_mm.c b/arch/m68k/mm/init_mm.c
index bbe5254..89f3b20 100644
--- a/arch/m68k/mm/init_mm.c
+++ b/arch/m68k/mm/init_mm.c
@@ -24,6 +24,7 @@
 #include <asm/page.h>
 #include <asm/pgalloc.h>
 #include <asm/system.h>
+#include <asm/traps.h>
 #include <asm/machdep.h>
 #include <asm/io.h>
 #ifdef CONFIG_ATARI
@@ -75,6 +76,38 @@ extern void init_pointer_table(unsigned long ptable);
 
 extern pmd_t *zero_pgtable;
 
+#if defined(CONFIG_MMU) && !defined(CONFIG_COLDFIRE)
+#define VECTORS	&vectors[0]
+#else
+#define VECTORS	_ramvec
+#endif
+
+void __init print_memmap(void)
+{
+#define UL(x) ((unsigned long) (x))
+#define MLK(b, t) UL(b), UL(t), (UL(t) - UL(b)) >> 10
+#define MLM(b, t) UL(b), UL(t), (UL(t) - UL(b)) >> 20
+#define MLK_ROUNDUP(b, t) b, t, DIV_ROUND_UP(((t) - (b)), 1024)
+
+	pr_notice("Virtual kernel memory layout:\n"
+		"    vector  : 0x%08lx - 0x%08lx   (%4ld KiB)\n"
+		"    kmap    : 0x%08lx - 0x%08lx   (%4ld MiB)\n"
+		"    vmalloc : 0x%08lx - 0x%08lx   (%4ld MiB)\n"
+		"    lowmem  : 0x%08lx - 0x%08lx   (%4ld MiB)\n"
+		"      .init : 0x%p" " - 0x%p" "   (%4d KiB)\n"
+		"      .text : 0x%p" " - 0x%p" "   (%4d KiB)\n"
+		"      .data : 0x%p" " - 0x%p" "   (%4d KiB)\n"
+		"      .bss  : 0x%p" " - 0x%p" "   (%4d KiB)\n",
+		MLK(VECTORS, VECTORS + 256),
+		MLM(KMAP_START, KMAP_END),
+		MLM(VMALLOC_START, VMALLOC_END),
+		MLM(PAGE_OFFSET, (unsigned long)high_memory),
+		MLK_ROUNDUP(__init_begin, __init_end),
+		MLK_ROUNDUP(_stext, _etext),
+		MLK_ROUNDUP(_sdata, _edata),
+		MLK_ROUNDUP(_sbss, _ebss));
+}
+
 void __init mem_init(void)
 {
 	pg_data_t *pgdat;
@@ -106,7 +139,7 @@ void __init mem_init(void)
 		}
 	}
 
-#ifndef CONFIG_SUN3
+#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
 	/* insert pointer tables allocated so far into the tablelist */
 	init_pointer_table((unsigned long)kernel_pg_dir);
 	for (i = 0; i < PTRS_PER_PGD; i++) {
@@ -125,6 +158,7 @@ void __init mem_init(void)
 	       codepages << (PAGE_SHIFT-10),
 	       datapages << (PAGE_SHIFT-10),
 	       initpages << (PAGE_SHIFT-10));
+	print_memmap();
 }
 
 #ifdef CONFIG_BLK_DEV_INITRD
diff --git a/arch/m68k/mm/kmap.c b/arch/m68k/mm/kmap.c
index 6934584..1cc2bed 100644
--- a/arch/m68k/mm/kmap.c
+++ b/arch/m68k/mm/kmap.c
@@ -171,7 +171,8 @@ void __iomem *__ioremap(unsigned long physaddr, unsigned long size, int cachefla
 			break;
 		}
 	} else {
-		physaddr |= (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_DIRTY);
+		physaddr |= (_PAGE_PRESENT | _PAGE_ACCESSED |
+			     _PAGE_DIRTY | _PAGE_READWRITE);
 		switch (cacheflag) {
 		case IOMAP_NOCACHE_SER:
 		case IOMAP_NOCACHE_NONSER:
diff --git a/arch/m68k/mm/mcfmmu.c b/arch/m68k/mm/mcfmmu.c
new file mode 100644
index 0000000..babd5a9
--- /dev/null
+++ b/arch/m68k/mm/mcfmmu.c
@@ -0,0 +1,198 @@
+/*
+ * Based upon linux/arch/m68k/mm/sun3mmu.c
+ * Based upon linux/arch/ppc/mm/mmu_context.c
+ *
+ * Implementations of mm routines specific to the Coldfire MMU.
+ *
+ * Copyright (c) 2008 Freescale Semiconductor, Inc.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/bootmem.h>
+
+#include <asm/setup.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/mmu_context.h>
+#include <asm/mcf_pgalloc.h>
+#include <asm/tlbflush.h>
+
+#define KMAPAREA(x)	((x >= VMALLOC_START) && (x < KMAP_END))
+
+mm_context_t next_mmu_context;
+unsigned long context_map[LAST_CONTEXT / BITS_PER_LONG + 1];
+atomic_t nr_free_contexts;
+struct mm_struct *context_mm[LAST_CONTEXT+1];
+extern unsigned long num_pages;
+
+void free_initmem(void)
+{
+}
+
+/*
+ * ColdFire paging_init derived from sun3.
+ */
+void __init paging_init(void)
+{
+	pgd_t *pg_dir;
+	pte_t *pg_table;
+	unsigned long address, size;
+	unsigned long next_pgtable, bootmem_end;
+	unsigned long zones_size[MAX_NR_ZONES];
+	enum zone_type zone;
+	int i;
+
+	empty_zero_page = (void *) alloc_bootmem_pages(PAGE_SIZE);
+	memset((void *) empty_zero_page, 0, PAGE_SIZE);
+
+	pg_dir = swapper_pg_dir;
+	memset(swapper_pg_dir, 0, sizeof(swapper_pg_dir));
+
+	size = num_pages * sizeof(pte_t);
+	size = (size + PAGE_SIZE) & ~(PAGE_SIZE-1);
+	next_pgtable = (unsigned long) alloc_bootmem_pages(size);
+
+	bootmem_end = (next_pgtable + size + PAGE_SIZE) & PAGE_MASK;
+	pg_dir += PAGE_OFFSET >> PGDIR_SHIFT;
+
+	address = PAGE_OFFSET;
+	while (address < (unsigned long)high_memory) {
+		pg_table = (pte_t *) next_pgtable;
+		next_pgtable += PTRS_PER_PTE * sizeof(pte_t);
+		pgd_val(*pg_dir) = (unsigned long) pg_table;
+		pg_dir++;
+
+		/* now change pg_table to kernel virtual addresses */
+		for (i = 0; i < PTRS_PER_PTE; ++i, ++pg_table) {
+			pte_t pte = pfn_pte(virt_to_pfn(address), PAGE_INIT);
+			if (address >= (unsigned long) high_memory)
+				pte_val(pte) = 0;
+
+			set_pte(pg_table, pte);
+			address += PAGE_SIZE;
+		}
+	}
+
+	current->mm = NULL;
+
+	for (zone = 0; zone < MAX_NR_ZONES; zone++)
+		zones_size[zone] = 0x0;
+	zones_size[ZONE_DMA] = num_pages;
+	free_area_init(zones_size);
+}
+
+int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word)
+{
+	unsigned long flags, mmuar;
+	struct mm_struct *mm;
+	pgd_t *pgd;
+	pmd_t *pmd;
+	pte_t *pte;
+	int asid;
+
+	local_irq_save(flags);
+
+	mmuar = (dtlb) ? mmu_read(MMUAR) :
+		regs->pc + (extension_word * sizeof(long));
+
+	mm = (!user_mode(regs) && KMAPAREA(mmuar)) ? &init_mm : current->mm;
+	if (!mm) {
+		local_irq_restore(flags);
+		return -1;
+	}
+
+	pgd = pgd_offset(mm, mmuar);
+	if (pgd_none(*pgd))  {
+		local_irq_restore(flags);
+		return -1;
+	}
+
+	pmd = pmd_offset(pgd, mmuar);
+	if (pmd_none(*pmd)) {
+		local_irq_restore(flags);
+		return -1;
+	}
+
+	pte = (KMAPAREA(mmuar)) ? pte_offset_kernel(pmd, mmuar)
+				: pte_offset_map(pmd, mmuar);
+	if (pte_none(*pte) || !pte_present(*pte)) {
+		local_irq_restore(flags);
+		return -1;
+	}
+
+	if (write) {
+		if (!pte_write(*pte)) {
+			local_irq_restore(flags);
+			return -1;
+		}
+		set_pte(pte, pte_mkdirty(*pte));
+	}
+
+	set_pte(pte, pte_mkyoung(*pte));
+	asid = mm->context & 0xff;
+	if (!pte_dirty(*pte) && !KMAPAREA(mmuar))
+		set_pte(pte, pte_wrprotect(*pte));
+
+	mmu_write(MMUTR, (mmuar & PAGE_MASK) | (asid << MMUTR_IDN) |
+		(((int)(pte->pte) & (int)CF_PAGE_MMUTR_MASK)
+		>> CF_PAGE_MMUTR_SHIFT) | MMUTR_V);
+
+	mmu_write(MMUDR, (pte_val(*pte) & PAGE_MASK) |
+		((pte->pte) & CF_PAGE_MMUDR_MASK) | MMUDR_SZ_8KB | MMUDR_X);
+
+	if (dtlb)
+		mmu_write(MMUOR, MMUOR_ACC | MMUOR_UAA);
+	else
+		mmu_write(MMUOR, MMUOR_ITLB | MMUOR_ACC | MMUOR_UAA);
+
+	local_irq_restore(flags);
+	return 0;
+}
+
+/*
+ * Initialize the context management stuff.
+ * The following was taken from arch/ppc/mmu_context.c
+ */
+void __init mmu_context_init(void)
+{
+	/*
+	 * Some processors have too few contexts to reserve one for
+	 * init_mm, and require using context 0 for a normal task.
+	 * Other processors reserve the use of context zero for the kernel.
+	 * This code assumes FIRST_CONTEXT < 32.
+	 */
+	context_map[0] = (1 << FIRST_CONTEXT) - 1;
+	next_mmu_context = FIRST_CONTEXT;
+	atomic_set(&nr_free_contexts, LAST_CONTEXT - FIRST_CONTEXT + 1);
+}
+
+/*
+ * Steal a context from a task that has one at the moment.
+ * This is only used on 8xx and 4xx and we presently assume that
+ * they don't do SMP.  If they do then thicfpgalloc.hs will have to check
+ * whether the MM we steal is in use.
+ * We also assume that this is only used on systems that don't
+ * use an MMU hash table - this is true for 8xx and 4xx.
+ * This isn't an LRU system, it just frees up each context in
+ * turn (sort-of pseudo-random replacement :).  This would be the
+ * place to implement an LRU scheme if anyone was motivated to do it.
+ *  -- paulus
+ */
+void steal_context(void)
+{
+	struct mm_struct *mm;
+	/*
+	 * free up context `next_mmu_context'
+	 * if we shouldn't free context 0, don't...
+	 */
+	if (next_mmu_context < FIRST_CONTEXT)
+		next_mmu_context = FIRST_CONTEXT;
+	mm = context_mm[next_mmu_context];
+	flush_tlb_mm(mm);
+	destroy_context(mm);
+}
+
diff --git a/arch/m68k/mm/memory.c b/arch/m68k/mm/memory.c
index 34c77ce..a5dbb74 100644
--- a/arch/m68k/mm/memory.c
+++ b/arch/m68k/mm/memory.c
@@ -203,7 +203,9 @@ static inline void pushcl040(unsigned long paddr)
 
 void cache_clear (unsigned long paddr, int len)
 {
-    if (CPU_IS_040_OR_060) {
+    if (CPU_IS_COLDFIRE) {
+	flush_cf_bcache(0, DCACHE_MAX_ADDR);
+    } else if (CPU_IS_040_OR_060) {
 	int tmp;
 
 	/*
@@ -250,7 +252,9 @@ EXPORT_SYMBOL(cache_clear);
 
 void cache_push (unsigned long paddr, int len)
 {
-    if (CPU_IS_040_OR_060) {
+    if (CPU_IS_COLDFIRE) {
+	flush_cf_bcache(0, DCACHE_MAX_ADDR);
+    } else if (CPU_IS_040_OR_060) {
 	int tmp = PAGE_SIZE;
 
 	/*
diff --git a/arch/m68k/mvme16x/config.c b/arch/m68k/mvme16x/config.c
index 31a66d9..c3fb3bd 100644
--- a/arch/m68k/mvme16x/config.c
+++ b/arch/m68k/mvme16x/config.c
@@ -124,6 +124,163 @@ static void __init mvme16x_init_IRQ (void)
 #define PccSCCMICR	0x1d
 #define PccSCCTICR	0x1e
 #define PccSCCRICR	0x1f
+#define PccTPIACKR	0x25
+
+#ifdef CONFIG_EARLY_PRINTK
+
+/**** cd2401 registers ****/
+#define CD2401_ADDR	(0xfff45000)
+
+#define CyGFRCR         (0x81)
+#define CyCCR		(0x13)
+#define      CyCLR_CHAN		(0x40)
+#define      CyINIT_CHAN	(0x20)
+#define      CyCHIP_RESET	(0x10)
+#define      CyENB_XMTR		(0x08)
+#define      CyDIS_XMTR		(0x04)
+#define      CyENB_RCVR		(0x02)
+#define      CyDIS_RCVR		(0x01)
+#define CyCAR		(0xee)
+#define CyIER		(0x11)
+#define      CyMdmCh		(0x80)
+#define      CyRxExc		(0x20)
+#define      CyRxData		(0x08)
+#define      CyTxMpty		(0x02)
+#define      CyTxRdy		(0x01)
+#define CyLICR		(0x26)
+#define CyRISR		(0x89)
+#define      CyTIMEOUT		(0x80)
+#define      CySPECHAR		(0x70)
+#define      CyOVERRUN		(0x08)
+#define      CyPARITY		(0x04)
+#define      CyFRAME		(0x02)
+#define      CyBREAK		(0x01)
+#define CyREOIR		(0x84)
+#define CyTEOIR		(0x85)
+#define CyMEOIR		(0x86)
+#define      CyNOTRANS		(0x08)
+#define CyRFOC		(0x30)
+#define CyRDR		(0xf8)
+#define CyTDR		(0xf8)
+#define CyMISR		(0x8b)
+#define CyRISR		(0x89)
+#define CyTISR		(0x8a)
+#define CyMSVR1		(0xde)
+#define CyMSVR2		(0xdf)
+#define      CyDSR		(0x80)
+#define      CyDCD		(0x40)
+#define      CyCTS		(0x20)
+#define      CyDTR		(0x02)
+#define      CyRTS		(0x01)
+#define CyRTPRL		(0x25)
+#define CyRTPRH		(0x24)
+#define CyCOR1		(0x10)
+#define      CyPARITY_NONE	(0x00)
+#define      CyPARITY_E		(0x40)
+#define      CyPARITY_O		(0xC0)
+#define      Cy_5_BITS		(0x04)
+#define      Cy_6_BITS		(0x05)
+#define      Cy_7_BITS		(0x06)
+#define      Cy_8_BITS		(0x07)
+#define CyCOR2		(0x17)
+#define      CyETC		(0x20)
+#define      CyCtsAE		(0x02)
+#define CyCOR3		(0x16)
+#define      Cy_1_STOP		(0x02)
+#define      Cy_2_STOP		(0x04)
+#define CyCOR4		(0x15)
+#define      CyREC_FIFO		(0x0F)  /* Receive FIFO threshold */
+#define CyCOR5		(0x14)
+#define CyCOR6		(0x18)
+#define CyCOR7		(0x07)
+#define CyRBPR		(0xcb)
+#define CyRCOR		(0xc8)
+#define CyTBPR		(0xc3)
+#define CyTCOR		(0xc0)
+#define CySCHR1		(0x1f)
+#define CySCHR2 	(0x1e)
+#define CyTPR		(0xda)
+#define CyPILR1		(0xe3)
+#define CyPILR2		(0xe0)
+#define CyPILR3		(0xe1)
+#define CyCMR		(0x1b)
+#define      CyASYNC		(0x02)
+#define CyLICR          (0x26)
+#define CyLIVR          (0x09)
+#define CySCRL		(0x23)
+#define CySCRH		(0x22)
+#define CyTFTC		(0x80)
+
+static void cons_write(struct console *co, const char *str, unsigned count)
+{
+	volatile unsigned char *base_addr = (u_char *)CD2401_ADDR;
+	volatile u_char sink;
+	u_char ier;
+	int port;
+	u_char do_lf = 0;
+	int i = 0;
+
+	/* Ensure transmitter is enabled! */
+
+	port = 0;
+	base_addr[CyCAR] = (u_char)port;
+	while (base_addr[CyCCR])
+		;
+	base_addr[CyCCR] = CyENB_XMTR;
+
+	ier = base_addr[CyIER];
+	base_addr[CyIER] = CyTxMpty;
+
+	while (1) {
+		if (pcc2chip[PccSCCTICR] & 0x20)
+		{
+			/* We have a Tx int. Acknowledge it */
+			sink = pcc2chip[PccTPIACKR];
+			if ((base_addr[CyLICR] >> 2) == port) {
+				if (i == count) {
+					/* Last char of string is now output */
+					base_addr[CyTEOIR] = CyNOTRANS;
+					break;
+				}
+				if (do_lf) {
+					base_addr[CyTDR] = '\n';
+					str++;
+					i++;
+					do_lf = 0;
+				}
+				else if (*str == '\n') {
+					base_addr[CyTDR] = '\r';
+					do_lf = 1;
+				}
+				else {
+					base_addr[CyTDR] = *str++;
+					i++;
+				}
+				base_addr[CyTEOIR] = 0;
+			}
+			else
+				base_addr[CyTEOIR] = CyNOTRANS;
+		}
+	}
+
+	base_addr[CyIER] = ier;
+}
+
+static struct console cons_info =
+{
+	.name	= "sercon",
+	.write	= cons_write,
+	.flags	= CON_PRINTBUFFER | CON_BOOT,
+	.index	= -1,
+};
+
+static void __init mvme16x_early_console(void)
+{
+	register_console(&cons_info);
+
+	printk(KERN_INFO "MVME16x: early console registered\n");
+}
+#endif
 
 void __init config_mvme16x(void)
 {
@@ -183,6 +340,9 @@ void __init config_mvme16x(void)
 	pcc2chip[PccSCCMICR] = 0x10;
 	pcc2chip[PccSCCTICR] = 0x10;
 	pcc2chip[PccSCCRICR] = 0x10;
+#ifdef CONFIG_EARLY_PRINTK
+	mvme16x_early_console();
+#endif
     }
 }
 
diff --git a/arch/m68k/platform/54xx/config.c b/arch/m68k/platform/54xx/config.c
index 7813098..ee04354 100644
--- a/arch/m68k/platform/54xx/config.c
+++ b/arch/m68k/platform/54xx/config.c
@@ -13,11 +13,17 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+#include <asm/pgalloc.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
 #include <asm/m54xxsim.h>
 #include <asm/mcfuart.h>
 #include <asm/m54xxgpt.h>
+#ifdef CONFIG_MMU
+#include <asm/mmu_context.h>
+#endif
 
 /***************************************************************************/
 
@@ -95,8 +101,49 @@ static void mcf54xx_reset(void)
 
 /***************************************************************************/
 
+#ifdef CONFIG_MMU
+
+unsigned long num_pages;
+
+static void __init mcf54xx_bootmem_alloc(void)
+{
+	unsigned long start_pfn;
+	unsigned long memstart;
+
+	/* _rambase and _ramend will be naturally page aligned */
+	m68k_memory[0].addr = _rambase;
+	m68k_memory[0].size = _ramend - _rambase;
+
+	/* compute total pages in system */
+	num_pages = (_ramend - _rambase) >> PAGE_SHIFT;
+
+	/* page numbers */
+	memstart = PAGE_ALIGN(_ramstart);
+	min_low_pfn = _rambase >> PAGE_SHIFT;
+	start_pfn = memstart >> PAGE_SHIFT;
+	max_low_pfn = _ramend >> PAGE_SHIFT;
+	high_memory = (void *)_ramend;
+
+	m68k_virt_to_node_shift = fls(_ramend - _rambase - 1) - 6;
+	module_fixup(NULL, __start_fixup, __stop_fixup);
+
+	/* setup bootmem data */
+	m68k_setup_node(0);
+	memstart += init_bootmem_node(NODE_DATA(0), start_pfn,
+		min_low_pfn, max_low_pfn);
+	free_bootmem_node(NODE_DATA(0), memstart, _ramend - memstart);
+}
+
+#endif /* CONFIG_MMU */
+
+/***************************************************************************/
+
 void __init config_BSP(char *commandp, int size)
 {
+#ifdef CONFIG_MMU
+	mcf54xx_bootmem_alloc();
+	mmu_context_init();
+#endif
 	mach_reset = mcf54xx_reset;
 	m54xx_uarts_init();
 }
diff --git a/arch/m68k/platform/68328/Makefile b/arch/m68k/platform/68328/Makefile
index e4dfd8f..ee61bf8 100644
--- a/arch/m68k/platform/68328/Makefile
+++ b/arch/m68k/platform/68328/Makefile
@@ -14,12 +14,8 @@ obj-$(CONFIG_M68328)	+= config.o
 obj-$(CONFIG_ROM)	+= romvec.o
 
 extra-y			:= head.o
-extra-$(CONFIG_M68328)	+= bootlogo.rh head.o
-
-$(obj)/bootlogo.rh: $(src)/bootlogo.h
-	perl $(src)/bootlogo.pl < $(src)/bootlogo.h > $(obj)/bootlogo.rh
 
 $(obj)/head.o: $(obj)/$(head-y)
 	ln -sf $(head-y) $(obj)/head.o
 
-clean-files := $(obj)/bootlogo.rh $(obj)/head.o $(head-y)
+clean-files := $(obj)/head.o $(head-y)
diff --git a/arch/m68k/platform/68328/bootlogo.h b/arch/m68k/platform/68328/bootlogo.h
index 67bc2c1..b896c93 100644
--- a/arch/m68k/platform/68328/bootlogo.h
+++ b/arch/m68k/platform/68328/bootlogo.h
@@ -1,6 +1,6 @@
 #define bootlogo_width 160
 #define bootlogo_height 160
-static unsigned char bootlogo_bits[] = {
+unsigned char __attribute__ ((aligned(16))) bootlogo_bits[] = {
   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0x01, 0x00, 0x00, 0x00,
   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
   0x00, 0x00, 0x40, 0x55, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
diff --git a/arch/m68k/platform/68328/bootlogo.pl b/arch/m68k/platform/68328/bootlogo.pl
deleted file mode 100644
index b04ae3f..0000000
--- a/arch/m68k/platform/68328/bootlogo.pl
+++ /dev/null
@@ -1,10 +0,0 @@
-
-$_ = join("", <>);
-
-s/(0x[0-9a-f]{2})/sprintf("0x%.2x",ord(pack("b8",unpack("B8",chr(hex($1))))))/gei;
-
-s/^ /	.byte /gm;
-s/[,};]+$//gm;
-s/^static.*//gm;
-
-print $_;
diff --git a/arch/m68k/platform/68328/config.c b/arch/m68k/platform/68328/config.c
index a7bd21d..d70bf26 100644
--- a/arch/m68k/platform/68328/config.c
+++ b/arch/m68k/platform/68328/config.c
@@ -20,6 +20,9 @@
 #include <asm/system.h>
 #include <asm/machdep.h>
 #include <asm/MC68328.h>
+#if defined(CONFIG_PILOT) || defined(CONFIG_INIT_LCD)
+#include "bootlogo.h"
+#endif
 
 /***************************************************************************/
 
diff --git a/arch/m68k/platform/68328/head-pilot.S b/arch/m68k/platform/68328/head-pilot.S
index aecff53..2ebfd64 100644
--- a/arch/m68k/platform/68328/head-pilot.S
+++ b/arch/m68k/platform/68328/head-pilot.S
@@ -24,19 +24,7 @@
 .global _ramstart
 .global _ramend
 
-.global penguin_bits
-
-#ifdef CONFIG_PILOT
-
-#define IMR 0xFFFFF304
-
-	.data
-	.align 16
-
-penguin_bits:	
-#include "bootlogo.rh"
-
-#endif
+.global bootlogo_bits
 
 /*****************************************************************************/
 
@@ -185,9 +173,6 @@ L3:
 	moveq	#79, %d7
 	movel	%d0, _ramend
 
-	movel	%a3, %d0
-	movel	%d0, rom_length
-
 	pea	0
 	pea	env
 	pea	%sp@(4)
@@ -196,7 +181,7 @@ L3:
 	DBG_PUTC('H')
 
 #ifdef CONFIG_PILOT
-	movel	#penguin_bits, 0xFFFFFA00
+	movel	#bootlogo_bits, 0xFFFFFA00
 	moveb	#10, 0xFFFFFA05
 	movew	#160, 0xFFFFFA08
 	movew	#160, 0xFFFFFA0A
diff --git a/arch/m68k/platform/68328/head-rom.S b/arch/m68k/platform/68328/head-rom.S
index 6ec77d3..a5ff96d 100644
--- a/arch/m68k/platform/68328/head-rom.S
+++ b/arch/m68k/platform/68328/head-rom.S
@@ -8,7 +8,7 @@
 	.global _ramend
 
 #ifdef CONFIG_INIT_LCD
-	.global splash_bits
+	.global bootlogo_bits
 #endif
 
 	.data
@@ -29,16 +29,11 @@ _ramend:
 
 #define	RAMEND	(CONFIG_RAMBASE + CONFIG_RAMSIZE)
 
-#ifdef CONFIG_INIT_LCD
-splash_bits:
-#include "bootlogo.rh"
-#endif
-	
 	.text
 _start:
 _stext:	movew	#0x2700,%sr
 #ifdef CONFIG_INIT_LCD
-	movel	#splash_bits, 0xfffffA00 /* LSSA */
+	movel	#bootlogo_bits, 0xfffffA00 /* LSSA */
 	moveb	#0x28,   0xfffffA05	/* LVPW */
 	movew	#0x280,  0xFFFFFa08	/* LXMAX */
 	movew	#0x1df,  0xFFFFFa0a	/* LYMAX */
diff --git a/arch/m68k/platform/68328/timers.c b/arch/m68k/platform/68328/timers.c
index 309f7259..f267886 100644
--- a/arch/m68k/platform/68328/timers.c
+++ b/arch/m68k/platform/68328/timers.c
@@ -93,7 +93,6 @@ static struct clocksource m68328_clk = {
 	.name	= "timer",
 	.rating	= 250,
 	.read	= m68328_read_clk,
-	.shift	= 20,
 	.mask	= CLOCKSOURCE_MASK(32),
 	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
 };
@@ -115,8 +114,7 @@ void hw_timer_init(void)
 
 	/* Enable timer 1 */
 	TCTL |= TCTL_TEN;
-	m68328_clk.mult = clocksource_hz2mult(TICKS_PER_JIFFY*HZ, m68328_clk.shift);
-	clocksource_register(&m68328_clk);
+	clocksource_register_hz(&m68328_clk, TICKS_PER_JIFFY*HZ);
 }
 
 /***************************************************************************/
diff --git a/arch/m68k/platform/coldfire/dma_timer.c b/arch/m68k/platform/coldfire/dma_timer.c
index a5f5628..235ad57 100644
--- a/arch/m68k/platform/coldfire/dma_timer.c
+++ b/arch/m68k/platform/coldfire/dma_timer.c
@@ -44,7 +44,6 @@ static struct clocksource clocksource_cf_dt = {
 	.rating		= 200,
 	.read		= cf_dt_get_cycles,
 	.mask		= CLOCKSOURCE_MASK(32),
-	.shift		= 20,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
@@ -60,9 +59,7 @@ static int __init  init_cf_dt_clocksource(void)
 	__raw_writeb(0x00, DTER0);
 	__raw_writel(0x00000000, DTRR0);
 	__raw_writew(DMA_DTMR_CLK_DIV_16 | DMA_DTMR_ENABLE, DTMR0);
-	clocksource_cf_dt.mult = clocksource_hz2mult(DMA_FREQ,
-						     clocksource_cf_dt.shift);
-	return clocksource_register(&clocksource_cf_dt);
+	return clocksource_register_hz(&clocksource_cf_dt, DMA_FREQ);
 }
 
 arch_initcall(init_cf_dt_clocksource);
diff --git a/arch/m68k/platform/coldfire/entry.S b/arch/m68k/platform/coldfire/entry.S
index 3157461..863889f 100644
--- a/arch/m68k/platform/coldfire/entry.S
+++ b/arch/m68k/platform/coldfire/entry.S
@@ -54,7 +54,6 @@ sw_usp:
 .globl ret_from_signal
 .globl sys_call_table
 .globl inthandler
-.globl fasthandler
 
 enosys:
 	mov.l	#sys_ni_syscall,%d3
@@ -63,6 +62,7 @@ enosys:
 ENTRY(system_call)
 	SAVE_ALL_SYS
 	move	#0x2000,%sr		/* enable intrs again */
+	GET_CURRENT(%d2)
 
 	cmpl	#NR_syscalls,%d0
 	jcc	enosys
@@ -166,6 +166,7 @@ Lsignal_return:
  */
 ENTRY(inthandler)
 	SAVE_ALL_INT
+	GET_CURRENT(%d2)
 
 	movew	%sp@(PT_OFF_FORMATVEC),%d0 /* put exception # in d0 */
 	andl	#0x03fc,%d0		/* mask out vector only */
@@ -191,7 +192,9 @@ ENTRY(resume)
 	movel	%sp,%a0@(TASK_THREAD+THREAD_KSP) /* save kernel stack pointer */
 	RDUSP					 /* movel %usp,%a3 */
 	movel	%a3,%a0@(TASK_THREAD+THREAD_USP) /* save thread user stack */
-
+#ifdef CONFIG_MMU
+	movel	%a1,%a2				 /* set new current */
+#endif
 	movel	%a1@(TASK_THREAD+THREAD_USP),%a3 /* restore thread user stack */
 	WRUSP					 /* movel %a3,%usp */
 	movel	%a1@(TASK_THREAD+THREAD_KSP),%sp /* restore new kernel stack */
diff --git a/arch/m68k/platform/coldfire/gpio.c b/arch/m68k/platform/coldfire/gpio.c
index ff004579..292a1a5 100644
--- a/arch/m68k/platform/coldfire/gpio.c
+++ b/arch/m68k/platform/coldfire/gpio.c
@@ -15,7 +15,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 
 #include <asm/gpio.h>
 #include <asm/pinmux.h>
@@ -115,13 +115,14 @@ void mcf_gpio_free(struct gpio_chip *chip, unsigned offset)
 		mcf_pinmux_release(mcf_chip->gpio_to_pinmux[offset], 0);
 }
 
-struct sysdev_class mcf_gpio_sysclass = {
-	.name	= "gpio",
+struct bus_type mcf_gpio_subsys = {
+	.name		= "gpio",
+	.dev_name	= "gpio",
 };
 
 static int __init mcf_gpio_sysinit(void)
 {
-	return sysdev_class_register(&mcf_gpio_sysclass);
+	return subsys_system_register(&mcf_gpio_subsys, NULL);
 }
 
 core_initcall(mcf_gpio_sysinit);
diff --git a/arch/m68k/platform/coldfire/head.S b/arch/m68k/platform/coldfire/head.S
index c334838..38f04a3 100644
--- a/arch/m68k/platform/coldfire/head.S
+++ b/arch/m68k/platform/coldfire/head.S
@@ -3,7 +3,7 @@
 /*
  *	head.S -- common startup code for ColdFire CPUs.
  *
- *	(C) Copyright 1999-2010, Greg Ungerer <gerg@snapgear.com>.
+ *	(C) Copyright 1999-2011, Greg Ungerer <gerg@snapgear.com>.
  */
 
 /*****************************************************************************/
@@ -13,6 +13,7 @@
 #include <asm/asm-offsets.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
+#include <asm/mcfmmu.h>
 #include <asm/thread_info.h>
 
 /*****************************************************************************/
@@ -135,6 +136,14 @@ _init_sp:
 
 __HEAD
 
+#ifdef CONFIG_MMU
+_start0:
+	jmp	_start
+.global kernel_pg_dir
+.equ	kernel_pg_dir,_start0
+.equ	.,_start0+0x1000
+#endif
+
 /*
  *	This is the codes first entry point. This is where it all
  *	begins...
@@ -143,6 +152,9 @@ __HEAD
 _start:
 	nop					/* filler */
 	movew	#0x2700, %sr			/* no interrupts */
+	movel	#CACHE_INIT,%d0			/* disable cache */
+	movec	%d0,%CACR
+	nop
 #if defined(CONFIG_UBOOT)
 	movel	%sp,_init_sp			/* save initial stack pointer */
 #endif
@@ -176,9 +188,6 @@ _start:
 	 *	it is very similar. Define the exact settings in the headers
 	 *	then the code here is the same for all.
 	 */
-	movel	#CACHE_INIT,%d0			/* invalidate whole cache */
-	movec	%d0,%CACR
-	nop
 	movel	#ACR0_MODE,%d0			/* set RAM region for caching */
 	movec	%d0,%ACR0
 	movel	#ACR1_MODE,%d0			/* anything else to cache? */
@@ -193,6 +202,26 @@ _start:
 	movec	%d0,%CACR
 	nop
 
+#ifdef CONFIG_MMU
+	/*
+	 *	Identity mapping for the kernel region.
+	 */
+	movel	#(MMUBASE+1),%d0		/* enable MMUBAR registers */
+	movec	%d0,%MMUBAR
+	movel	#MMUOR_CA,%d0			/* clear TLB entries */
+	movel	%d0,MMUOR
+	movel	#0,%d0				/* set ASID to 0 */
+	movec	%d0,%asid
+
+	movel	#MMUCR_EN,%d0			/* Enable the identity map */
+	movel	%d0,MMUCR
+	nop					/* sync i-pipeline */
+
+	movel	#_vstart,%a0			/* jump to "virtual" space */
+	jmp	%a0@
+_vstart:
+#endif /* CONFIG_MMU */
+
 #ifdef CONFIG_ROMFS_FS
 	/*
 	 *	Move ROM filesystem above bss :-)
@@ -238,6 +267,22 @@ _clear_bss:
 	lea	init_thread_union,%a0
 	lea	THREAD_SIZE(%a0),%sp
 
+#ifdef CONFIG_MMU
+.global m68k_cputype
+.global m68k_mmutype
+.global m68k_fputype
+.global m68k_machtype
+	movel	#CPU_COLDFIRE,%d0
+	movel	%d0,m68k_cputype		/* Mark us as a ColdFire */
+	movel	#MMU_COLDFIRE,%d0
+	movel	%d0,m68k_mmutype
+	movel	#FPU_COLDFIRE,%d0
+	movel	%d0,m68k_fputype
+	movel	#MACH_M54XX,%d0
+	movel	%d0,m68k_machtype		/* Mark us as a 54xx machine */
+	lea	init_task,%a2			/* Set "current" init task */
+#endif
+
 	/*
 	 *	Assember start up done, start code proper.
 	 */
diff --git a/arch/m68k/platform/coldfire/pit.c b/arch/m68k/platform/coldfire/pit.c
index c2b9809..02663d2 100644
--- a/arch/m68k/platform/coldfire/pit.c
+++ b/arch/m68k/platform/coldfire/pit.c
@@ -144,7 +144,6 @@ static struct clocksource pit_clk = {
 	.name	= "pit",
 	.rating	= 100,
 	.read	= pit_read_clk,
-	.shift	= 20,
 	.mask	= CLOCKSOURCE_MASK(32),
 };
 
@@ -162,8 +161,7 @@ void hw_timer_init(void)
 
 	setup_irq(MCFINT_VECBASE + MCFINT_PIT1, &pit_irq);
 
-	pit_clk.mult = clocksource_hz2mult(FREQ, pit_clk.shift);
-	clocksource_register(&pit_clk);
+	clocksource_register_hz(&pit_clk, FREQ);
 }
 
 /***************************************************************************/
diff --git a/arch/m68k/platform/coldfire/sltimers.c b/arch/m68k/platform/coldfire/sltimers.c
index 6a85daf..54e1452 100644
--- a/arch/m68k/platform/coldfire/sltimers.c
+++ b/arch/m68k/platform/coldfire/sltimers.c
@@ -98,23 +98,25 @@ static struct irqaction mcfslt_timer_irq = {
 static cycle_t mcfslt_read_clk(struct clocksource *cs)
 {
 	unsigned long flags;
-	u32 cycles;
-	u16 scnt;
+	u32 cycles, scnt;
 
 	local_irq_save(flags);
 	scnt = __raw_readl(TA(MCFSLT_SCNT));
 	cycles = mcfslt_cnt;
+	if (__raw_readl(TA(MCFSLT_SSR)) & MCFSLT_SSR_TE) {
+		cycles += mcfslt_cycles_per_jiffy;
+		scnt = __raw_readl(TA(MCFSLT_SCNT));
+	}
 	local_irq_restore(flags);
 
 	/* subtract because slice timers count down */
-	return cycles - scnt;
+	return cycles + ((mcfslt_cycles_per_jiffy - 1) - scnt);
 }
 
 static struct clocksource mcfslt_clk = {
 	.name	= "slt",
 	.rating	= 250,
 	.read	= mcfslt_read_clk,
-	.shift	= 20,
 	.mask	= CLOCKSOURCE_MASK(32),
 	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
 };
@@ -136,8 +138,7 @@ void hw_timer_init(void)
 
 	setup_irq(MCF_IRQ_TIMER, &mcfslt_timer_irq);
 
-	mcfslt_clk.mult = clocksource_hz2mult(MCF_BUSCLK, mcfslt_clk.shift);
-	clocksource_register(&mcfslt_clk);
+	clocksource_register_hz(&mcfslt_clk, MCF_BUSCLK);
 
 #ifdef CONFIG_HIGHPROFILE
 	mcfslt_profile_init();
diff --git a/arch/m68k/platform/coldfire/timers.c b/arch/m68k/platform/coldfire/timers.c
index 60242f6..0d90da3 100644
--- a/arch/m68k/platform/coldfire/timers.c
+++ b/arch/m68k/platform/coldfire/timers.c
@@ -88,7 +88,6 @@ static struct clocksource mcftmr_clk = {
 	.name	= "tmr",
 	.rating	= 250,
 	.read	= mcftmr_read_clk,
-	.shift	= 20,
 	.mask	= CLOCKSOURCE_MASK(32),
 	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
 };
@@ -109,8 +108,7 @@ void hw_timer_init(void)
 	__raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
 		MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, TA(MCFTIMER_TMR));
 
-	mcftmr_clk.mult = clocksource_hz2mult(FREQ, mcftmr_clk.shift);
-	clocksource_register(&mcftmr_clk);
+	clocksource_register_hz(&mcftmr_clk, FREQ);
 
 	setup_irq(MCF_IRQ_TIMER, &mcftmr_timer_irq);
 
diff --git a/arch/microblaze/include/asm/memblock.h b/arch/microblaze/include/asm/memblock.h
deleted file mode 100644
index 20a8e25..0000000
--- a/arch/microblaze/include/asm/memblock.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * Copyright (C) 2008 Michal Simek <monstr@monstr.eu>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_MEMBLOCK_H
-#define _ASM_MICROBLAZE_MEMBLOCK_H
-
-#endif /* _ASM_MICROBLAZE_MEMBLOCK_H */
-
-
diff --git a/arch/microblaze/include/asm/thread_info.h b/arch/microblaze/include/asm/thread_info.h
index b73da2ac..1a8ab6a 100644
--- a/arch/microblaze/include/asm/thread_info.h
+++ b/arch/microblaze/include/asm/thread_info.h
@@ -125,7 +125,6 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_MEMDIE		6	/* is terminating due to OOM killer */
 #define TIF_SYSCALL_AUDIT	9       /* syscall auditing active */
 #define TIF_SECCOMP		10      /* secure computing */
-#define TIF_FREEZE		14	/* Freezing for suspend */
 
 /* true if poll_idle() is polling TIF_NEED_RESCHED */
 #define TIF_POLLING_NRFLAG	16
@@ -137,7 +136,6 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_SINGLESTEP		(1 << TIF_SINGLESTEP)
 #define _TIF_IRET		(1 << TIF_IRET)
 #define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
-#define _TIF_FREEZE		(1 << TIF_FREEZE)
 #define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
 #define _TIF_SECCOMP		(1 << TIF_SECCOMP)
 
diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c
index 95cc295..7dcb5bf 100644
--- a/arch/microblaze/kernel/process.c
+++ b/arch/microblaze/kernel/process.c
@@ -103,10 +103,12 @@ void cpu_idle(void)
 		if (!idle)
 			idle = default_idle;
 
-		tick_nohz_stop_sched_tick(1);
+		tick_nohz_idle_enter();
+		rcu_idle_enter();
 		while (!need_resched())
 			idle();
-		tick_nohz_restart_sched_tick();
+		rcu_idle_exit();
+		tick_nohz_idle_exit();
 
 		preempt_enable_no_resched();
 		schedule();
diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c
index 977484a..80d314e 100644
--- a/arch/microblaze/kernel/prom.c
+++ b/arch/microblaze/kernel/prom.c
@@ -122,7 +122,6 @@ void __init early_init_devtree(void *params)
 	of_scan_flat_dt(early_init_dt_scan_chosen, cmd_line);
 
 	/* Scan memory nodes and rebuild MEMBLOCKs */
-	memblock_init();
 	of_scan_flat_dt(early_init_dt_scan_root, NULL);
 	of_scan_flat_dt(early_init_dt_scan_memory, NULL);
 
@@ -130,7 +129,7 @@ void __init early_init_devtree(void *params)
 	strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
 	parse_early_param();
 
-	memblock_analyze();
+	memblock_allow_resize();
 
 	pr_debug("Phys. mem: %lx\n", (unsigned long) memblock_phys_mem_size());
 
diff --git a/arch/microblaze/kernel/reset.c b/arch/microblaze/kernel/reset.c
index bd8ccab..88a0163 100644
--- a/arch/microblaze/kernel/reset.c
+++ b/arch/microblaze/kernel/reset.c
@@ -19,50 +19,11 @@
 static int handle; /* reset pin handle */
 static unsigned int reset_val;
 
-static int of_reset_gpio_handle(void)
-{
-	int ret; /* variable which stored handle reset gpio pin */
-	struct device_node *root; /* root node */
-	struct device_node *gpio; /* gpio node */
-	struct gpio_chip *gc;
-	u32 flags;
-	const void *gpio_spec;
-
-	/* find out root node */
-	root = of_find_node_by_path("/");
-
-	/* give me handle for gpio node to be possible allocate pin */
-	ret = of_parse_phandles_with_args(root, "hard-reset-gpios",
-				"#gpio-cells", 0, &gpio, &gpio_spec);
-	if (ret) {
-		pr_debug("%s: can't parse gpios property\n", __func__);
-		goto err0;
-	}
-
-	gc = of_node_to_gpiochip(gpio);
-	if (!gc) {
-		pr_debug("%s: gpio controller %s isn't registered\n",
-			 root->full_name, gpio->full_name);
-		ret = -ENODEV;
-		goto err1;
-	}
-
-	ret = gc->of_xlate(gc, root, gpio_spec, &flags);
-	if (ret < 0)
-		goto err1;
-
-	ret += gc->base;
-err1:
-	of_node_put(gpio);
-err0:
-	pr_debug("%s exited with status %d\n", __func__, ret);
-	return ret;
-}
-
 void of_platform_reset_gpio_probe(void)
 {
 	int ret;
-	handle = of_reset_gpio_handle();
+	handle = of_get_named_gpio(of_find_node_by_path("/"),
+				   "hard-reset-gpios", 0);
 
 	if (!gpio_is_valid(handle)) {
 		printk(KERN_INFO "Skipping unavailable RESET gpio %d (%s)\n",
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index d46f1da..a7636d3 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -25,6 +25,9 @@ config MIPS
 	select GENERIC_IRQ_SHOW
 	select HAVE_ARCH_JUMP_LABEL
 	select IRQ_FORCED_THREADING
+	select HAVE_MEMBLOCK
+	select HAVE_MEMBLOCK_NODE_MAP
+	select ARCH_DISCARD_MEMBLOCK
 
 menu "Machine selection"
 
@@ -65,7 +68,6 @@ config AR7
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_ZBOOT_UART16550
 	select ARCH_REQUIRE_GPIOLIB
-	select GCD
 	select VLYNQ
 	help
 	  Support for the Texas Instruments AR7 System-on-a-Chip
@@ -2064,9 +2066,6 @@ config ARCH_DISCONTIGMEM_ENABLE
 	  or have huge holes in the physical address space for other reasons.
 	  See <file:Documentation/vm/numa> for more.
 
-config ARCH_POPULATES_NODE_MAP
-	def_bool y
-
 config ARCH_SPARSEMEM_ENABLE
 	bool
 	select SPARSEMEM_STATIC
@@ -2369,10 +2368,6 @@ config TC
 	  Linux driver support status is documented at:
 	  <http://www.linux-mips.org/wiki/DECstation>
 
-#config ACCESSBUS
-#	bool "Access.Bus support"
-#	depends on TC
-
 config MMU
 	bool
 	default y
diff --git a/arch/mips/include/asm/ip32/mace.h b/arch/mips/include/asm/ip32/mace.h
index d08d7c6..c523123 100644
--- a/arch/mips/include/asm/ip32/mace.h
+++ b/arch/mips/include/asm/ip32/mace.h
@@ -95,7 +95,7 @@ struct mace_video {
  * Ethernet interface
  */
 struct mace_ethernet {
-	volatile unsigned long mac_ctrl;
+	volatile u64 mac_ctrl;
 	volatile unsigned long int_stat;
 	volatile unsigned long dma_ctrl;
 	volatile unsigned long timer;
diff --git a/arch/mips/include/asm/ipcbuf.h b/arch/mips/include/asm/ipcbuf.h
index d47d08f..84c7e51 100644
--- a/arch/mips/include/asm/ipcbuf.h
+++ b/arch/mips/include/asm/ipcbuf.h
@@ -1,28 +1 @@
-#ifndef _ASM_IPCBUF_H
-#define _ASM_IPCBUF_H
-
-/*
- * The ipc64_perm structure for alpha architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit seq
- * - 2 miscellaneous 64-bit values
- */
-
-struct ipc64_perm
-{
-	__kernel_key_t	key;
-	__kernel_uid_t	uid;
-	__kernel_gid_t	gid;
-	__kernel_uid_t	cuid;
-	__kernel_gid_t	cgid;
-	__kernel_mode_t	mode;
-	unsigned short	seq;
-	unsigned short	__pad1;
-	unsigned long	__unused1;
-	unsigned long	__unused2;
-};
-
-#endif /* _ASM_IPCBUF_H */
+#include <asm-generic/ipcbuf.h>
diff --git a/arch/mips/include/asm/socket.h b/arch/mips/include/asm/socket.h
index 9de5190..ad5c0a7 100644
--- a/arch/mips/include/asm/socket.h
+++ b/arch/mips/include/asm/socket.h
@@ -82,6 +82,9 @@ To add: #define SO_REUSEPORT 0x0200	/* Allow local address and port reuse.  */
 
 #define SO_RXQ_OVFL             40
 
+#define SO_WIFI_STATUS		41
+#define SCM_WIFI_STATUS		SO_WIFI_STATUS
+
 #ifdef __KERNEL__
 
 /** sock_type - Socket types
diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h
index 97f8bf6..0d85d8e 100644
--- a/arch/mips/include/asm/thread_info.h
+++ b/arch/mips/include/asm/thread_info.h
@@ -117,7 +117,6 @@ register struct thread_info *__current_thread_info __asm__("$28");
 #define TIF_USEDFPU		16	/* FPU was used by this task this quantum (SMP) */
 #define TIF_POLLING_NRFLAG	17	/* true if poll_idle() is polling TIF_NEED_RESCHED */
 #define TIF_MEMDIE		18	/* is terminating due to OOM killer */
-#define TIF_FREEZE		19
 #define TIF_FIXADE		20	/* Fix address errors in software */
 #define TIF_LOGADE		21	/* Log address errors to syslog */
 #define TIF_32BIT_REGS		22	/* also implies 16/32 fprs */
@@ -141,7 +140,6 @@ register struct thread_info *__current_thread_info __asm__("$28");
 #define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
 #define _TIF_USEDFPU		(1<<TIF_USEDFPU)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
-#define _TIF_FREEZE		(1<<TIF_FREEZE)
 #define _TIF_FIXADE		(1<<TIF_FIXADE)
 #define _TIF_LOGADE		(1<<TIF_LOGADE)
 #define _TIF_32BIT_REGS		(1<<TIF_32BIT_REGS)
diff --git a/arch/mips/include/asm/types.h b/arch/mips/include/asm/types.h
index 533812b..43bf70e 100644
--- a/arch/mips/include/asm/types.h
+++ b/arch/mips/include/asm/types.h
@@ -21,12 +21,6 @@
 # include <asm-generic/int-ll64.h>
 #endif
 
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-#endif /* __ASSEMBLY__ */
-
 /*
  * These aren't exported outside the kernel to avoid name space clashes
  */
diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c
index 4f2971b..315fc0b 100644
--- a/arch/mips/kernel/perf_event_mipsxx.c
+++ b/arch/mips/kernel/perf_event_mipsxx.c
@@ -623,7 +623,7 @@ static int mipspmu_event_init(struct perf_event *event)
 	if (!atomic_inc_not_zero(&active_events)) {
 		if (atomic_read(&active_events) > MIPS_MAX_HWEVENTS) {
 			atomic_dec(&active_events);
-			return -ENOSPC;
+			return -EINVAL;
 		}
 
 		mutex_lock(&pmu_reserve_mutex);
@@ -732,15 +732,15 @@ static int validate_group(struct perf_event *event)
 	memset(&fake_cpuc, 0, sizeof(fake_cpuc));
 
 	if (!validate_event(&fake_cpuc, leader))
-		return -ENOSPC;
+		return -EINVAL;
 
 	list_for_each_entry(sibling, &leader->sibling_list, group_entry) {
 		if (!validate_event(&fake_cpuc, sibling))
-			return -ENOSPC;
+			return -EINVAL;
 	}
 
 	if (!validate_event(&fake_cpuc, event))
-		return -ENOSPC;
+		return -EINVAL;
 
 	return 0;
 }
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index c47f96e..7955409 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -56,7 +56,8 @@ void __noreturn cpu_idle(void)
 
 	/* endless idle loop with no priority at all */
 	while (1) {
-		tick_nohz_stop_sched_tick(1);
+		tick_nohz_idle_enter();
+		rcu_idle_enter();
 		while (!need_resched() && cpu_online(cpu)) {
 #ifdef CONFIG_MIPS_MT_SMTC
 			extern void smtc_idle_loop_hook(void);
@@ -77,7 +78,8 @@ void __noreturn cpu_idle(void)
 		     system_state == SYSTEM_BOOTING))
 			play_dead();
 #endif
-		tick_nohz_restart_sched_tick();
+		rcu_idle_exit();
+		tick_nohz_idle_exit();
 		preempt_enable_no_resched();
 		schedule();
 		preempt_disable();
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 84af26a..b1cb8f8 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -14,6 +14,7 @@
 #include <linux/ioport.h>
 #include <linux/export.h>
 #include <linux/screen_info.h>
+#include <linux/memblock.h>
 #include <linux/bootmem.h>
 #include <linux/initrd.h>
 #include <linux/root_dev.h>
@@ -352,7 +353,7 @@ static void __init bootmem_init(void)
 			continue;
 #endif
 
-		add_active_range(0, start, end);
+		memblock_add_node(PFN_PHYS(start), PFN_PHYS(end - start), 0);
 	}
 
 	/*
diff --git a/arch/mips/sgi-ip27/Kconfig b/arch/mips/sgi-ip27/Kconfig
index bc5e976..4b2ea28 100644
--- a/arch/mips/sgi-ip27/Kconfig
+++ b/arch/mips/sgi-ip27/Kconfig
@@ -1,9 +1,3 @@
-#config SGI_SN0_XXL
-#	bool "IP27 XXL"
-#	depends on SGI_IP27
-#	  This options adds support for userspace processes up to 16TB size.
-#	  Normally the limit is just .5TB.
-
 choice
 	prompt "Node addressing mode"
 	depends on SGI_IP27
diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c
index bc12971..b105eca 100644
--- a/arch/mips/sgi-ip27/ip27-memory.c
+++ b/arch/mips/sgi-ip27/ip27-memory.c
@@ -12,6 +12,7 @@
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/memblock.h>
 #include <linux/mm.h>
 #include <linux/mmzone.h>
 #include <linux/module.h>
@@ -381,8 +382,8 @@ static void __init szmem(void)
 				continue;
 			}
 			num_physpages += slot_psize;
-			add_active_range(node, slot_getbasepfn(node, slot),
-					 slot_getbasepfn(node, slot) + slot_psize);
+			memblock_add_node(PFN_PHYS(slot_getbasepfn(node, slot)),
+					  PFN_PHYS(slot_psize), node);
 		}
 	}
 }
diff --git a/arch/mips/sibyte/Kconfig b/arch/mips/sibyte/Kconfig
index 3e639bd..3cd937e 100644
--- a/arch/mips/sibyte/Kconfig
+++ b/arch/mips/sibyte/Kconfig
@@ -71,7 +71,6 @@ config SIBYTE_SB1xxx_SOC
 	bool
 	select DMA_COHERENT
 	select IRQ_CPU
-	select SIBYTE_CFE
 	select SWAP_IO_SPACE
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
diff --git a/arch/mips/txx9/generic/7segled.c b/arch/mips/txx9/generic/7segled.c
index 7f8416f..8e93b21 100644
--- a/arch/mips/txx9/generic/7segled.c
+++ b/arch/mips/txx9/generic/7segled.c
@@ -9,7 +9,7 @@
  * (C) Copyright TOSHIBA CORPORATION 2005-2007
  * All Rights Reserved.
  */
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/slab.h>
 #include <linux/map_to_7segment.h>
 #include <asm/txx9/generic.h>
@@ -37,8 +37,8 @@ int txx9_7segled_putc(unsigned int pos, char c)
 	return 0;
 }
 
-static ssize_t ascii_store(struct sys_device *dev,
-			   struct sysdev_attribute *attr,
+static ssize_t ascii_store(struct device *dev,
+			   struct device_attribute *attr,
 			   const char *buf, size_t size)
 {
 	unsigned int ch = dev->id;
@@ -46,8 +46,8 @@ static ssize_t ascii_store(struct sys_device *dev,
 	return size;
 }
 
-static ssize_t raw_store(struct sys_device *dev,
-			 struct sysdev_attribute *attr,
+static ssize_t raw_store(struct device *dev,
+			 struct device_attribute *attr,
 			 const char *buf, size_t size)
 {
 	unsigned int ch = dev->id;
@@ -55,19 +55,19 @@ static ssize_t raw_store(struct sys_device *dev,
 	return size;
 }
 
-static SYSDEV_ATTR(ascii, 0200, NULL, ascii_store);
-static SYSDEV_ATTR(raw, 0200, NULL, raw_store);
+static DEVICE_ATTR(ascii, 0200, NULL, ascii_store);
+static DEVICE_ATTR(raw, 0200, NULL, raw_store);
 
-static ssize_t map_seg7_show(struct sysdev_class *class,
-			     struct sysdev_class_attribute *attr,
+static ssize_t map_seg7_show(struct device *dev,
+			     struct device_attribute *attr,
 			     char *buf)
 {
 	memcpy(buf, &txx9_seg7map, sizeof(txx9_seg7map));
 	return sizeof(txx9_seg7map);
 }
 
-static ssize_t map_seg7_store(struct sysdev_class *class,
-			      struct sysdev_class_attribute *attr,
+static ssize_t map_seg7_store(struct device *dev,
+			      struct device_attribute *attr,
 			      const char *buf, size_t size)
 {
 	if (size != sizeof(txx9_seg7map))
@@ -76,10 +76,11 @@ static ssize_t map_seg7_store(struct sysdev_class *class,
 	return size;
 }
 
-static SYSDEV_CLASS_ATTR(map_seg7, 0600, map_seg7_show, map_seg7_store);
+static DEVICE_ATTR(map_seg7, 0600, map_seg7_show, map_seg7_store);
 
-static struct sysdev_class tx_7segled_sysdev_class = {
-	.name	= "7segled",
+static struct bus_type tx_7segled_subsys = {
+	.name		= "7segled",
+	.dev_name	= "7segled",
 };
 
 static int __init tx_7segled_init_sysfs(void)
@@ -87,26 +88,25 @@ static int __init tx_7segled_init_sysfs(void)
 	int error, i;
 	if (!tx_7segled_num)
 		return -ENODEV;
-	error = sysdev_class_register(&tx_7segled_sysdev_class);
+	error = subsys_system_register(&tx_7segled_subsys, NULL);
 	if (error)
 		return error;
-	error = sysdev_class_create_file(&tx_7segled_sysdev_class,
-					 &attr_map_seg7);
+	error = device_create_file(tx_7segled_subsys.dev_root, &dev_attr_map_seg7);
 	if (error)
 		return error;
 	for (i = 0; i < tx_7segled_num; i++) {
-		struct sys_device *dev;
+		struct device *dev;
 		dev = kzalloc(sizeof(*dev), GFP_KERNEL);
 		if (!dev) {
 			error = -ENODEV;
 			break;
 		}
 		dev->id = i;
-		dev->cls = &tx_7segled_sysdev_class;
-		error = sysdev_register(dev);
+		dev->dev = &tx_7segled_subsys;
+		error = device_register(dev);
 		if (!error) {
-			sysdev_create_file(dev, &attr_ascii);
-			sysdev_create_file(dev, &attr_raw);
+			device_create_file(dev, &dev_attr_ascii);
+			device_create_file(dev, &dev_attr_raw);
 		}
 	}
 	return error;
diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c
index ec38e00..ae77a79 100644
--- a/arch/mips/txx9/generic/setup.c
+++ b/arch/mips/txx9/generic/setup.c
@@ -22,7 +22,7 @@
 #include <linux/serial_core.h>
 #include <linux/mtd/physmap.h>
 #include <linux/leds.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/slab.h>
 #include <linux/irq.h>
 #include <asm/bootinfo.h>
@@ -897,10 +897,13 @@ void __init txx9_aclc_init(unsigned long baseaddr, int irq,
 #endif
 }
 
-static struct sysdev_class txx9_sramc_sysdev_class;
+static struct bus_type txx9_sramc_subsys = {
+	.name = "txx9_sram",
+	.dev_name = "txx9_sram",
+};
 
-struct txx9_sramc_sysdev {
-	struct sys_device dev;
+struct txx9_sramc_dev {
+	struct device dev;
 	struct bin_attribute bindata_attr;
 	void __iomem *base;
 };
@@ -909,7 +912,7 @@ static ssize_t txx9_sram_read(struct file *filp, struct kobject *kobj,
 			      struct bin_attribute *bin_attr,
 			      char *buf, loff_t pos, size_t size)
 {
-	struct txx9_sramc_sysdev *dev = bin_attr->private;
+	struct txx9_sramc_dev *dev = bin_attr->private;
 	size_t ramsize = bin_attr->size;
 
 	if (pos >= ramsize)
@@ -924,7 +927,7 @@ static ssize_t txx9_sram_write(struct file *filp, struct kobject *kobj,
 			       struct bin_attribute *bin_attr,
 			       char *buf, loff_t pos, size_t size)
 {
-	struct txx9_sramc_sysdev *dev = bin_attr->private;
+	struct txx9_sramc_dev *dev = bin_attr->private;
 	size_t ramsize = bin_attr->size;
 
 	if (pos >= ramsize)
@@ -937,18 +940,13 @@ static ssize_t txx9_sram_write(struct file *filp, struct kobject *kobj,
 
 void __init txx9_sramc_init(struct resource *r)
 {
-	struct txx9_sramc_sysdev *dev;
+	struct txx9_sramc_dev *dev;
 	size_t size;
 	int err;
 
-	if (!txx9_sramc_sysdev_class.name) {
-		txx9_sramc_sysdev_class.name = "txx9_sram";
-		err = sysdev_class_register(&txx9_sramc_sysdev_class);
-		if (err) {
-			txx9_sramc_sysdev_class.name = NULL;
-			return;
-		}
-	}
+	err = subsys_system_register(&txx9_sramc_subsys, NULL);
+	if (err)
+		return;
 	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
 	if (!dev)
 		return;
@@ -956,7 +954,7 @@ void __init txx9_sramc_init(struct resource *r)
 	dev->base = ioremap(r->start, size);
 	if (!dev->base)
 		goto exit;
-	dev->dev.cls = &txx9_sramc_sysdev_class;
+	dev->dev.bus = &txx9_sramc_subsys;
 	sysfs_bin_attr_init(&dev->bindata_attr);
 	dev->bindata_attr.attr.name = "bindata";
 	dev->bindata_attr.attr.mode = S_IRUSR | S_IWUSR;
@@ -964,12 +962,12 @@ void __init txx9_sramc_init(struct resource *r)
 	dev->bindata_attr.write = txx9_sram_write;
 	dev->bindata_attr.size = size;
 	dev->bindata_attr.private = dev;
-	err = sysdev_register(&dev->dev);
+	err = device_register(&dev->dev);
 	if (err)
 		goto exit;
 	err = sysfs_create_bin_file(&dev->dev.kobj, &dev->bindata_attr);
 	if (err) {
-		sysdev_unregister(&dev->dev);
+		device_unregister(&dev->dev);
 		goto exit;
 	}
 	return;
diff --git a/arch/mips/txx9/generic/setup_tx4939.c b/arch/mips/txx9/generic/setup_tx4939.c
index ba3cec3..6567895 100644
--- a/arch/mips/txx9/generic/setup_tx4939.c
+++ b/arch/mips/txx9/generic/setup_tx4939.c
@@ -15,7 +15,7 @@
 #include <linux/delay.h>
 #include <linux/netdevice.h>
 #include <linux/notifier.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/ethtool.h>
 #include <linux/param.h>
 #include <linux/ptrace.h>
diff --git a/arch/mn10300/include/asm/ipcbuf.h b/arch/mn10300/include/asm/ipcbuf.h
index f6f63d4..84c7e51 100644
--- a/arch/mn10300/include/asm/ipcbuf.h
+++ b/arch/mn10300/include/asm/ipcbuf.h
@@ -1,29 +1 @@
-#ifndef _ASM_IPCBUF_H
-#define _ASM_IPCBUF_H
-
-/*
- * The ipc64_perm structure for MN10300 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit mode_t and seq
- * - 2 miscellaneous 32-bit values
- */
-
-struct ipc64_perm
-{
-	__kernel_key_t		key;
-	__kernel_uid32_t	uid;
-	__kernel_gid32_t	gid;
-	__kernel_uid32_t	cuid;
-	__kernel_gid32_t	cgid;
-	__kernel_mode_t		mode;
-	unsigned short		__pad1;
-	unsigned short		seq;
-	unsigned short		__pad2;
-	unsigned long		__unused1;
-	unsigned long		__unused2;
-};
-
-#endif /* _ASM_IPCBUF_H */
+#include <asm-generic/ipcbuf.h>
diff --git a/arch/mn10300/include/asm/socket.h b/arch/mn10300/include/asm/socket.h
index 4e60c42..876356d 100644
--- a/arch/mn10300/include/asm/socket.h
+++ b/arch/mn10300/include/asm/socket.h
@@ -62,4 +62,7 @@
 
 #define SO_RXQ_OVFL             40
 
+#define SO_WIFI_STATUS		41
+#define SCM_WIFI_STATUS		SO_WIFI_STATUS
+
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/mn10300/include/asm/thread_info.h b/arch/mn10300/include/asm/thread_info.h
index 87c2130..28cf521 100644
--- a/arch/mn10300/include/asm/thread_info.h
+++ b/arch/mn10300/include/asm/thread_info.h
@@ -165,7 +165,6 @@ extern void free_thread_info(struct thread_info *);
 #define TIF_RESTORE_SIGMASK	5	/* restore signal mask in do_signal() */
 #define TIF_POLLING_NRFLAG	16	/* true if poll_idle() is polling TIF_NEED_RESCHED */
 #define TIF_MEMDIE		17	/* is terminating due to OOM killer */
-#define TIF_FREEZE		18	/* freezing for suspend */
 
 #define _TIF_SYSCALL_TRACE	+(1 << TIF_SYSCALL_TRACE)
 #define _TIF_NOTIFY_RESUME	+(1 << TIF_NOTIFY_RESUME)
@@ -174,7 +173,6 @@ extern void free_thread_info(struct thread_info *);
 #define _TIF_SINGLESTEP		+(1 << TIF_SINGLESTEP)
 #define _TIF_RESTORE_SIGMASK	+(1 << TIF_RESTORE_SIGMASK)
 #define _TIF_POLLING_NRFLAG	+(1 << TIF_POLLING_NRFLAG)
-#define _TIF_FREEZE		+(1 << TIF_FREEZE)
 
 #define _TIF_WORK_MASK		0x0000FFFE	/* work to do on interrupt/exception return */
 #define _TIF_ALLWORK_MASK	0x0000FFFF	/* work to do on any return to u-space */
diff --git a/arch/mn10300/include/asm/types.h b/arch/mn10300/include/asm/types.h
index c1833eb..713d4ba 100644
--- a/arch/mn10300/include/asm/types.h
+++ b/arch/mn10300/include/asm/types.h
@@ -13,12 +13,6 @@
 
 #include <asm-generic/int-ll64.h>
 
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-#endif /* __ASSEMBLY__ */
-
 /*
  * These aren't exported outside the kernel to avoid name space clashes
  */
diff --git a/arch/openrisc/include/asm/memblock.h b/arch/openrisc/include/asm/memblock.h
deleted file mode 100644
index bbe5a1c..0000000
--- a/arch/openrisc/include/asm/memblock.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * OpenRISC Linux
- *
- * Linux architectural port borrowing liberally from similar works of
- * others.  All original copyrights apply as per the original source
- * declaration.
- *
- * OpenRISC implementation:
- * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
- * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
- * et al.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __ASM_OPENRISC_MEMBLOCK_H
-#define __ASM_OPENRISC_MEMBLOCK_H
-
-/* empty */
-
-#endif /* __ASM_OPENRISC_MEMBLOCK_H */
diff --git a/arch/openrisc/kernel/idle.c b/arch/openrisc/kernel/idle.c
index d5bc5f8..e5fc7887 100644
--- a/arch/openrisc/kernel/idle.c
+++ b/arch/openrisc/kernel/idle.c
@@ -51,7 +51,8 @@ void cpu_idle(void)
 
 	/* endless idle loop with no priority at all */
 	while (1) {
-		tick_nohz_stop_sched_tick(1);
+		tick_nohz_idle_enter();
+		rcu_idle_enter();
 
 		while (!need_resched()) {
 			check_pgt_cache();
@@ -69,7 +70,8 @@ void cpu_idle(void)
 			set_thread_flag(TIF_POLLING_NRFLAG);
 		}
 
-		tick_nohz_restart_sched_tick();
+		rcu_idle_exit();
+		tick_nohz_idle_exit();
 		preempt_enable_no_resched();
 		schedule();
 		preempt_disable();
diff --git a/arch/openrisc/kernel/prom.c b/arch/openrisc/kernel/prom.c
index 1bb58ba..3d4478f 100644
--- a/arch/openrisc/kernel/prom.c
+++ b/arch/openrisc/kernel/prom.c
@@ -76,14 +76,13 @@ void __init early_init_devtree(void *params)
 	of_scan_flat_dt(early_init_dt_scan_chosen, cmd_line);
 
 	/* Scan memory nodes and rebuild MEMBLOCKs */
-	memblock_init();
 	of_scan_flat_dt(early_init_dt_scan_root, NULL);
 	of_scan_flat_dt(early_init_dt_scan_memory, NULL);
 
 	/* Save command line for /proc/cmdline and then parse parameters */
 	strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
 
-	memblock_analyze();
+	memblock_allow_resize();
 
 	/* We must copy the flattend device tree from init memory to regular
 	 * memory because the device tree references the strings in it
diff --git a/arch/parisc/hpux/sys_hpux.c b/arch/parisc/hpux/sys_hpux.c
index 6ab9580..d9dc6cd 100644
--- a/arch/parisc/hpux/sys_hpux.c
+++ b/arch/parisc/hpux/sys_hpux.c
@@ -136,16 +136,9 @@ struct hpux_ustat {
  */
 static int hpux_ustat(dev_t dev, struct hpux_ustat __user *ubuf)
 {
-	struct super_block *s;
 	struct hpux_ustat tmp;  /* Changed to hpux_ustat */
 	struct kstatfs sbuf;
-	int err = -EINVAL;
-
-	s = user_get_super(dev);
-	if (s == NULL)
-		goto out;
-	err = statfs_by_dentry(s->s_root, &sbuf);
-	drop_super(s);
+	int err = vfs_ustat(dev, &sbuf);
 	if (err)
 		goto out;
 
diff --git a/arch/parisc/include/asm/socket.h b/arch/parisc/include/asm/socket.h
index 225b7d6..d28c51b 100644
--- a/arch/parisc/include/asm/socket.h
+++ b/arch/parisc/include/asm/socket.h
@@ -61,6 +61,9 @@
 
 #define SO_RXQ_OVFL             0x4021
 
+#define SO_WIFI_STATUS		0x4022
+#define SCM_WIFI_STATUS		SO_WIFI_STATUS
+
 /* O_NONBLOCK clashes with the bits used for socket types.  Therefore we
  * have to define SOCK_NONBLOCK to a different value here.
  */
diff --git a/arch/parisc/include/asm/thread_info.h b/arch/parisc/include/asm/thread_info.h
index aa8de72..6d9c7c7 100644
--- a/arch/parisc/include/asm/thread_info.h
+++ b/arch/parisc/include/asm/thread_info.h
@@ -58,7 +58,6 @@ struct thread_info {
 #define TIF_32BIT               4       /* 32 bit binary */
 #define TIF_MEMDIE		5	/* is terminating due to OOM killer */
 #define TIF_RESTORE_SIGMASK	6	/* restore saved signal mask */
-#define TIF_FREEZE		7	/* is freezing for suspend */
 #define TIF_NOTIFY_RESUME	8	/* callback before returning to user */
 #define TIF_SINGLESTEP		9	/* single stepping? */
 #define TIF_BLOCKSTEP		10	/* branch stepping? */
@@ -69,7 +68,6 @@ struct thread_info {
 #define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
 #define _TIF_32BIT		(1 << TIF_32BIT)
 #define _TIF_RESTORE_SIGMASK	(1 << TIF_RESTORE_SIGMASK)
-#define _TIF_FREEZE		(1 << TIF_FREEZE)
 #define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
 #define _TIF_SINGLESTEP		(1 << TIF_SINGLESTEP)
 #define _TIF_BLOCKSTEP		(1 << TIF_BLOCKSTEP)
diff --git a/arch/parisc/include/asm/types.h b/arch/parisc/include/asm/types.h
index 80e415c..8866f9b 100644
--- a/arch/parisc/include/asm/types.h
+++ b/arch/parisc/include/asm/types.h
@@ -3,10 +3,4 @@
 
 #include <asm-generic/int-ll64.h>
 
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-#endif /* __ASSEMBLY__ */
-
 #endif
diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c
index 45b7389..7c07743 100644
--- a/arch/parisc/kernel/time.c
+++ b/arch/parisc/kernel/time.c
@@ -198,8 +198,6 @@ static struct clocksource clocksource_cr16 = {
 	.rating			= 300,
 	.read			= read_cr16,
 	.mask			= CLOCKSOURCE_MASK(BITS_PER_LONG),
-	.mult			= 0, /* to be set */
-	.shift			= 22,
 	.flags			= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
@@ -270,7 +268,5 @@ void __init time_init(void)
 
 	/* register at clocksource framework */
 	current_cr16_khz = PAGE0->mem_10msec/10;  /* kHz */
-	clocksource_cr16.mult = clocksource_khz2mult(current_cr16_khz,
-						clocksource_cr16.shift);
-	clocksource_register(&clocksource_cr16);
+	clocksource_register_khz(&clocksource_cr16, current_cr16_khz);
 }
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 951e18f..692ac75 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -87,6 +87,10 @@ config ARCH_HAS_ILOG2_U64
 	bool
 	default y if 64BIT
 
+config ARCH_HAS_CPU_IDLE_WAIT
+	bool
+	default y
+
 config GENERIC_HWEIGHT
 	bool
 	default y
@@ -117,6 +121,7 @@ config PPC
 	select HAVE_KRETPROBES
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_MEMBLOCK
+	select HAVE_MEMBLOCK_NODE_MAP
 	select HAVE_DMA_ATTRS
 	select HAVE_DMA_API_DEBUG
 	select USE_GENERIC_SMP_HELPERS if SMP
@@ -132,6 +137,7 @@ config PPC
 	select IRQ_PER_CPU
 	select GENERIC_IRQ_SHOW
 	select GENERIC_IRQ_SHOW_LEVEL
+	select IRQ_FORCED_THREADING
 	select HAVE_RCU_TABLE_FREE if SMP
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_BPF_JIT if (PPC64 && NET)
@@ -362,8 +368,9 @@ config KEXEC
 
 config CRASH_DUMP
 	bool "Build a kdump crash kernel"
-	depends on PPC64 || 6xx || FSL_BOOKE
-	select RELOCATABLE if PPC64 || FSL_BOOKE
+	depends on PPC64 || 6xx || FSL_BOOKE || (44x && !SMP && !PPC_47x)
+	select RELOCATABLE if PPC64 || 44x
+	select DYNAMIC_MEMSTART if FSL_BOOKE
 	help
 	  Build a kernel suitable for use as a kdump capture kernel.
 	  The same kernel binary can be used as production kernel and dump
@@ -421,9 +428,6 @@ config ARCH_SPARSEMEM_DEFAULT
 	def_bool y
 	depends on (SMP && PPC_PSERIES) || PPC_PS3
 
-config ARCH_POPULATES_NODE_MAP
-	def_bool y
-
 config SYS_SUPPORTS_HUGETLBFS
 	bool
 
@@ -687,6 +691,10 @@ config FSL_LBC
 	  controller.  Also contains some common code used by
 	  drivers for specific local bus peripherals.
 
+config FSL_IFC
+	bool
+        depends on FSL_SOC
+
 config FSL_GTM
 	bool
 	depends on PPC_83xx || QUICC_ENGINE || CPM2
@@ -772,6 +780,10 @@ source "drivers/rapidio/Kconfig"
 
 endmenu
 
+config NONSTATIC_KERNEL
+	bool
+	default n
+
 menu "Advanced setup"
 	depends on PPC32
 
@@ -821,13 +833,32 @@ config LOWMEM_CAM_NUM
 	int "Number of CAMs to use to map low memory" if LOWMEM_CAM_NUM_BOOL
 	default 3
 
+config DYNAMIC_MEMSTART
+	bool "Enable page aligned dynamic load address for kernel (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && ADVANCED_OPTIONS && FLATMEM && (FSL_BOOKE || 44x)
+	select NONSTATIC_KERNEL
+	help
+	  This option enables the kernel to be loaded at any page aligned
+	  physical address. The kernel creates a mapping from KERNELBASE to 
+	  the address where the kernel is loaded. The page size here implies
+	  the TLB page size of the mapping for kernel on the particular platform.
+	  Please refer to the init code for finding the TLB page size.
+
+	  DYNAMIC_MEMSTART is an easy way of implementing pseudo-RELOCATABLE
+	  kernel image, where the only restriction is the page aligned kernel
+	  load address. When this option is enabled, the compile time physical 
+	  address CONFIG_PHYSICAL_START is ignored.
+
+	  This option is overridden by CONFIG_RELOCATABLE
+
 config RELOCATABLE
 	bool "Build a relocatable kernel (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && ADVANCED_OPTIONS && FLATMEM && (FSL_BOOKE || PPC_47x)
+	depends on EXPERIMENTAL && ADVANCED_OPTIONS && FLATMEM && 44x
+	select NONSTATIC_KERNEL
 	help
 	  This builds a kernel image that is capable of running at the
-	  location the kernel is loaded at (some alignment restrictions may
-	  exist).
+	  location the kernel is loaded at, without any alignment restrictions.
+	  This feature is a superset of DYNAMIC_MEMSTART and hence overrides it.
 
 	  One use is for the kexec on panic case where the recovery kernel
 	  must live at a different physical address than the primary
@@ -837,7 +868,11 @@ config RELOCATABLE
 	  it has been loaded at and the compile time physical addresses
 	  CONFIG_PHYSICAL_START is ignored.  However CONFIG_PHYSICAL_START
 	  setting can still be useful to bootwrappers that need to know the
-	  load location of the kernel (eg. u-boot/mkimage).
+	  load address of the kernel (eg. u-boot/mkimage).
+
+config RELOCATABLE_PPC32
+	def_bool y
+	depends on PPC32 && RELOCATABLE
 
 config PAGE_OFFSET_BOOL
 	bool "Set custom page offset address"
@@ -867,7 +902,7 @@ config KERNEL_START_BOOL
 config KERNEL_START
 	hex "Virtual address of kernel base" if KERNEL_START_BOOL
 	default PAGE_OFFSET if PAGE_OFFSET_BOOL
-	default "0xc2000000" if CRASH_DUMP && !RELOCATABLE
+	default "0xc2000000" if CRASH_DUMP && !NONSTATIC_KERNEL
 	default "0xc0000000"
 
 config PHYSICAL_START_BOOL
@@ -880,7 +915,7 @@ config PHYSICAL_START_BOOL
 
 config PHYSICAL_START
 	hex "Physical address where the kernel is loaded" if PHYSICAL_START_BOOL
-	default "0x02000000" if PPC_STD_MMU && CRASH_DUMP && !RELOCATABLE
+	default "0x02000000" if PPC_STD_MMU && CRASH_DUMP && !NONSTATIC_KERNEL
 	default "0x00000000"
 
 config PHYSICAL_ALIGN
@@ -926,6 +961,7 @@ endmenu
 if PPC64
 config RELOCATABLE
 	bool "Build a relocatable kernel"
+	select NONSTATIC_KERNEL
 	help
 	  This builds a kernel image that is capable of running anywhere
 	  in the RMA (real memory area) at any 16k-aligned base address.
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index 1b8a9c9..4ccb2a0 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -336,4 +336,16 @@ config PPC_EARLY_DEBUG_CPM_ADDR
 	  platform probing is done, all platforms selected must
 	  share the same address.
 
+config STRICT_DEVMEM
+	def_bool y
+	prompt "Filter access to /dev/mem"
+	help
+	  This option restricts access to /dev/mem.  If this option is
+	  disabled, you allow userspace access to all memory, including
+	  kernel and userspace memory. Accidental memory access is likely
+	  to be disastrous.
+	  Memory access is required for experts who want to debug the kernel.
+
+	  If you are unsure, say Y.
+
 endmenu
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 70ba0c0..b8b105c 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -63,9 +63,9 @@ override CC	+= -m$(CONFIG_WORD_SIZE)
 override AR	:= GNUTARGET=elf$(CONFIG_WORD_SIZE)-powerpc $(AR)
 endif
 
-LDFLAGS_vmlinux-yy := -Bstatic
-LDFLAGS_vmlinux-$(CONFIG_PPC64)$(CONFIG_RELOCATABLE) := -pie
-LDFLAGS_vmlinux	:= $(LDFLAGS_vmlinux-yy)
+LDFLAGS_vmlinux-y := -Bstatic
+LDFLAGS_vmlinux-$(CONFIG_RELOCATABLE) := -pie
+LDFLAGS_vmlinux	:= $(LDFLAGS_vmlinux-y)
 
 CFLAGS-$(CONFIG_PPC64)	:= -mminimal-toc -mtraceback=no -mcall-aixdesc
 CFLAGS-$(CONFIG_PPC32)	:= -ffixed-r2 -mmultiple
@@ -131,8 +131,7 @@ KBUILD_CFLAGS		+= -mno-sched-epilog
 endif
 
 cpu-as-$(CONFIG_4xx)		+= -Wa,-m405
-cpu-as-$(CONFIG_6xx)		+= -Wa,-maltivec
-cpu-as-$(CONFIG_POWER4)		+= -Wa,-maltivec
+cpu-as-$(CONFIG_ALTIVEC)	+= -Wa,-maltivec
 cpu-as-$(CONFIG_E500)		+= -Wa,-me500
 cpu-as-$(CONFIG_E200)		+= -Wa,-me200
 
@@ -166,7 +165,7 @@ all: zImage
 
 # With make 3.82 we cannot mix normal and wildcard targets
 BOOT_TARGETS1 := zImage zImage.initrd uImage
-BOOT_TARGETS2 := zImage% dtbImage% treeImage.% cuImage.% simpleImage.%
+BOOT_TARGETS2 := zImage% dtbImage% treeImage.% cuImage.% simpleImage.% uImage.%
 
 PHONY += $(BOOT_TARGETS1) $(BOOT_TARGETS2)
 
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 72ee8c1..15986e7 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -45,6 +45,7 @@ $(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
 $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
 $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
 $(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405
+$(obj)/treeboot-currituck.o: BOOTCFLAGS += -mcpu=405
 $(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405
 
 
@@ -79,7 +80,8 @@ src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c
 		cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
 		virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
 		cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c \
-		gamecube-head.S gamecube.c wii-head.S wii.c treeboot-iss4xx.c
+		gamecube-head.S gamecube.c wii-head.S wii.c treeboot-iss4xx.c \
+		treeboot-currituck.c
 src-boot := $(src-wlib) $(src-plat) empty.c
 
 src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -199,6 +201,7 @@ image-$(CONFIG_EP405)			+= dtbImage.ep405
 image-$(CONFIG_HOTFOOT)			+= cuImage.hotfoot
 image-$(CONFIG_WALNUT)			+= treeImage.walnut
 image-$(CONFIG_ACADIA)			+= cuImage.acadia
+image-$(CONFIG_OBS600)			+= uImage.obs600
 
 # Board ports in arch/powerpc/platform/44x/Kconfig
 image-$(CONFIG_EBONY)			+= treeImage.ebony cuImage.ebony
@@ -212,6 +215,7 @@ image-$(CONFIG_WARP)			+= cuImage.warp
 image-$(CONFIG_YOSEMITE)		+= cuImage.yosemite
 image-$(CONFIG_ISS4xx)			+= treeImage.iss4xx \
 					   treeImage.iss4xx-mpic
+image-$(CONFIG_CURRITUCK)			+= treeImage.currituck
 
 # Board ports in arch/powerpc/platform/8xx/Kconfig
 image-$(CONFIG_MPC86XADS)		+= cuImage.mpc866ads
@@ -316,6 +320,12 @@ $(obj)/zImage.iseries: vmlinux
 $(obj)/uImage: vmlinux $(wrapperbits)
 	$(call if_changed,wrap,uboot)
 
+$(obj)/uImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
+	$(call if_changed,wrap,uboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
+
+$(obj)/uImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
+	$(call if_changed,wrap,uboot-$*,,$(obj)/$*.dtb)
+
 $(obj)/cuImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
 	$(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
 
diff --git a/arch/powerpc/boot/dcr.h b/arch/powerpc/boot/dcr.h
index 645a7c9..cc73f7a 100644
--- a/arch/powerpc/boot/dcr.h
+++ b/arch/powerpc/boot/dcr.h
@@ -9,6 +9,12 @@
 	})
 #define mtdcr(rn, val) \
 	asm volatile("mtdcr %0,%1" : : "i"(rn), "r"(val))
+#define mfdcrx(rn) \
+	({	\
+		unsigned long rval; \
+		asm volatile("mfdcrx %0,%1" : "=r"(rval) : "r"(rn)); \
+		rval; \
+	})
 
 /* 440GP/440GX SDRAM controller DCRs */
 #define DCRN_SDRAM0_CFGADDR				0x010
diff --git a/arch/powerpc/boot/div64.S b/arch/powerpc/boot/div64.S
index d271ab5..bbcb8a4 100644
--- a/arch/powerpc/boot/div64.S
+++ b/arch/powerpc/boot/div64.S
@@ -57,3 +57,55 @@ __div64_32:
 	stw	r8,4(r3)
 	mr	r3,r6		# return the remainder in r3
 	blr
+
+/*
+ * Extended precision shifts.
+ *
+ * Updated to be valid for shift counts from 0 to 63 inclusive.
+ * -- Gabriel
+ *
+ * R3/R4 has 64 bit value
+ * R5    has shift count
+ * result in R3/R4
+ *
+ *  ashrdi3: arithmetic right shift (sign propagation)	
+ *  lshrdi3: logical right shift
+ *  ashldi3: left shift
+ */
+	.globl __ashrdi3
+__ashrdi3:
+	subfic	r6,r5,32
+	srw	r4,r4,r5	# LSW = count > 31 ? 0 : LSW >> count
+	addi	r7,r5,32	# could be xori, or addi with -32
+	slw	r6,r3,r6	# t1 = count > 31 ? 0 : MSW << (32-count)
+	rlwinm	r8,r7,0,32	# t3 = (count < 32) ? 32 : 0
+	sraw	r7,r3,r7	# t2 = MSW >> (count-32)
+	or	r4,r4,r6	# LSW |= t1
+	slw	r7,r7,r8	# t2 = (count < 32) ? 0 : t2
+	sraw	r3,r3,r5	# MSW = MSW >> count
+	or	r4,r4,r7	# LSW |= t2
+	blr
+
+	.globl __ashldi3
+__ashldi3:
+	subfic	r6,r5,32
+	slw	r3,r3,r5	# MSW = count > 31 ? 0 : MSW << count
+	addi	r7,r5,32	# could be xori, or addi with -32
+	srw	r6,r4,r6	# t1 = count > 31 ? 0 : LSW >> (32-count)
+	slw	r7,r4,r7	# t2 = count < 32 ? 0 : LSW << (count-32)
+	or	r3,r3,r6	# MSW |= t1
+	slw	r4,r4,r5	# LSW = LSW << count
+	or	r3,r3,r7	# MSW |= t2
+	blr
+
+	.globl __lshrdi3
+__lshrdi3:
+	subfic	r6,r5,32
+	srw	r4,r4,r5	# LSW = count > 31 ? 0 : LSW >> count
+	addi	r7,r5,32	# could be xori, or addi with -32
+	slw	r6,r3,r6	# t1 = count > 31 ? 0 : MSW << (32-count)
+	srw	r7,r3,r7	# t2 = count < 32 ? 0 : MSW >> (count-32)
+	or	r4,r4,r6	# LSW |= t1
+	srw	r3,r3,r5	# MSW = MSW >> count
+	or	r4,r4,r7	# LSW |= t2
+	blr
diff --git a/arch/powerpc/boot/dts/asp834x-redboot.dts b/arch/powerpc/boot/dts/asp834x-redboot.dts
index 261d10c..227290d 100644
--- a/arch/powerpc/boot/dts/asp834x-redboot.dts
+++ b/arch/powerpc/boot/dts/asp834x-redboot.dts
@@ -256,7 +256,7 @@
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x100>;
 			clock-frequency = <400000000>;
 			interrupts = <9 0x8>;
@@ -266,7 +266,7 @@
 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4600 0x100>;
 			clock-frequency = <400000000>;
 			interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/currituck.dts b/arch/powerpc/boot/dts/currituck.dts
new file mode 100644
index 0000000..b801dd0
--- /dev/null
+++ b/arch/powerpc/boot/dts/currituck.dts
@@ -0,0 +1,237 @@
+/*
+ * Device Tree Source for IBM Embedded PPC 476 Platform
+ *
+ * Copyright © 2011 Tony Breeds IBM Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x01f00000 0x00100000;	// spin table
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	model = "ibm,currituck";
+	compatible = "ibm,currituck";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		serial0 = &UART0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,476";
+			reg = <0>;
+			clock-frequency = <1600000000>; // 1.6 GHz
+			timebase-frequency = <100000000>; // 100Mhz
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			status = "ok";
+		};
+		cpu@1 {
+			device_type = "cpu";
+			model = "PowerPC,476";
+			reg = <1>;
+			clock-frequency = <1600000000>; // 1.6 GHz
+			timebase-frequency = <100000000>; // 100Mhz
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			status = "disabled";
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x01f00000>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x0>; // filled in by zImage
+	};
+
+	MPIC: interrupt-controller {
+		compatible = "chrp,open-pic";
+		interrupt-controller;
+		dcr-reg = <0xffc00000 0x00040000>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+	};
+
+	plb {
+		compatible = "ibm,plb6";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		clock-frequency = <200000000>; // 200Mhz
+
+		POB0: opb {
+			compatible = "ibm,opb-4xx", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/* Wish there was a nicer way of specifying a full
+			 * 32-bit range
+			 */
+			ranges = <0x00000000 0x00000200 0x00000000 0x80000000
+				  0x80000000 0x00000200 0x80000000 0x80000000>;
+			clock-frequency = <100000000>;
+
+			UART0: serial@10000000 {
+				device_type = "serial";
+				compatible = "ns16750", "ns16550";
+				reg = <0x10000000 0x00000008>;
+				virtual-reg = <0xe1000000>;
+				clock-frequency = <1851851>; // PCIe refclk/MCGC0_CTL[UART]
+				current-speed = <115200>;
+				interrupt-parent = <&MPIC>;
+				interrupts = <34 2>;
+			};
+
+			IIC0: i2c@00000000 {
+				compatible = "ibm,iic-currituck", "ibm,iic";
+				reg = <0x0 0x00000014>;
+				interrupt-parent = <&MPIC>;
+				interrupts = <79 2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+                                rtc@68 {
+                                        compatible = "stm,m41t80", "m41st85";
+                                        reg = <0x68>;
+                                };
+			};
+		};
+
+		PCIE0: pciex@10100000000 {		// 4xGBIF1
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+			primary;
+			port = <0x0>; /* port number */
+			reg = <0x00000101 0x00000000 0x0 0x10000000		/* Config space access */
+			       0x00000100 0x00000000 0x0 0x00001000>;	/* UTL Registers space access */
+			dcr-reg = <0x80 0x20>;
+
+//                                pci_space  < pci_addr          > < cpu_addr          > < size       >
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000110 0x80000000 0x0 0x80000000
+			          0x01000000 0x0        0x0        0x00000140 0x0        0x0 0x00010000>;
+
+			/* Inbound starting at 0 to memsize filled in by zImage */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>;
+
+			/* This drives busses 0 to 0xf */
+			bus-range = <0x0 0xf>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &MPIC 46 0x2 /* int A */
+				0x0 0x0 0x0 0x2 &MPIC 47 0x2 /* int B */
+				0x0 0x0 0x0 0x3 &MPIC 48 0x2 /* int C */
+				0x0 0x0 0x0 0x4 &MPIC 49 0x2 /* int D */>;
+		};
+
+		PCIE1: pciex@30100000000 {		// 4xGBIF0
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+			primary;
+			port = <0x1>; /* port number */
+			reg = <0x00000301 0x00000000 0x0 0x10000000		/* Config space access */
+			       0x00000300 0x00000000 0x0 0x00001000>;	/* UTL Registers space access */
+			dcr-reg = <0x60 0x20>;
+
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000310 0x80000000 0x0 0x80000000
+			          0x01000000 0x0        0x0        0x00000340 0x0        0x0 0x00010000>;
+
+			/* Inbound starting at 0 to memsize filled in by zImage */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>;
+
+			/* This drives busses 0 to 0xf */
+			bus-range = <0x0 0xf>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &MPIC 38 0x2 /* int A */
+				0x0 0x0 0x0 0x2 &MPIC 39 0x2 /* int B */
+				0x0 0x0 0x0 0x3 &MPIC 40 0x2 /* int C */
+				0x0 0x0 0x0 0x4 &MPIC 41 0x2 /* int D */>;
+		};
+
+		PCIE2: pciex@38100000000 {		// 2xGBIF0
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+			primary;
+			port = <0x2>; /* port number */
+			reg = <0x00000381 0x00000000 0x0 0x10000000		/* Config space access */
+			       0x00000380 0x00000000 0x0 0x00001000>;	/* UTL Registers space access */
+			dcr-reg = <0xA0 0x20>;
+
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000390 0x80000000 0x0 0x80000000
+			          0x01000000 0x0        0x0        0x000003C0 0x0        0x0 0x00010000>;
+
+			/* Inbound starting at 0 to memsize filled in by zImage */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>;
+
+			/* This drives busses 0 to 0xf */
+			bus-range = <0x0 0xf>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &MPIC 54 0x2 /* int A */
+				0x0 0x0 0x0 0x2 &MPIC 55 0x2 /* int B */
+				0x0 0x0 0x0 0x3 &MPIC 56 0x2 /* int C */
+				0x0 0x0 0x0 0x4 &MPIC 57 0x2 /* int D */>;
+		};
+
+	};
+
+	chosen {
+		linux,stdout-path = &UART0;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi
new file mode 100644
index 0000000..89af626
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi
@@ -0,0 +1,248 @@
+/*
+ * MPC8536 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,mpc8536-elbc", "fsl,elbc", "simple-bus";
+	interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x8000 */
+&pci0 {
+	compatible = "fsl,mpc8540-pci";
+	device_type = "pci";
+	interrupts = <24 0x2 0 0>;
+	bus-range = <0 0xff>;
+	#interrupt-cells = <1>;
+	#size-cells = <2>;
+	#address-cells = <3>;
+};
+
+/* controller at 0x9000 */
+&pci1 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <25 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <25 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+			>;
+	};
+};
+
+/* controller at 0xa000 */
+&pci2 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <26 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <26 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+			>;
+	};
+};
+
+/* controller at 0xb000 */
+&pci3 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <27 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <27 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
+			>;
+	};
+};
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,mpc8536-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <12>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,mpc8536-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <17 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,mpc8536-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <18 2 0 0>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+/include/ "pq3-espi-0.dtsi"
+	spi@7000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "pq3-gpio-0.dtsi"
+
+	/* mark compat w/8572 to get some erratum treatment */
+	gpio-controller@f000 {
+		compatible = "fsl,mpc8572-gpio", "fsl,pq3-gpio";
+	};
+
+	sata@18000 {
+		compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
+		reg = <0x18000 0x1000>;
+		cell-index = <1>;
+		interrupts = <74 0x2 0 0>;
+	};
+
+	sata@19000 {
+		compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
+		reg = <0x19000 0x1000>;
+		cell-index = <2>;
+		interrupts = <41 0x2 0 0>;
+	};
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,mpc8536-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x80000>; // L2, 512K
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-etsec1-0.dtsi"
+/include/ "pq3-etsec1-timer-0.dtsi"
+
+	usb@22000 {
+		compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
+		reg = <0x22000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <28 0x2 0 0>;
+	};
+
+	usb@23000 {
+		compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
+		reg = <0x23000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <46 0x2 0 0>;
+	};
+
+	ptp_clock@24e00 {
+		interrupts = <68 2 0 0 69 2 0 0 70 2 0 0 71 2 0 0>;
+	};
+
+/include/ "pq3-etsec1-2.dtsi"
+
+	ethernet@26000 {
+		cell-index = <1>;
+	};
+
+	usb@2b000 {
+		compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr";
+		reg = <0x2b000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <60 0x2 0 0>;
+	};
+
+/include/ "pq3-esdhc-0.dtsi"
+/include/ "pq3-sec3.0-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+	global-utilities@e0000 {
+		compatible = "fsl,mpc8536-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi
new file mode 100644
index 0000000..7de45a7
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi
@@ -0,0 +1,63 @@
+/*
+ * MPC8536 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+	compatible = "fsl,MPC8536";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet2;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		pci3 = &pci3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8536@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi
new file mode 100644
index 0000000..b68eb11
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi
@@ -0,0 +1,191 @@
+/*
+ * MPC8544 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,mpc8544-lbc", "fsl,pq3-localbus", "simple-bus";
+	interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x8000 */
+&pci0 {
+	compatible = "fsl,mpc8540-pci";
+	device_type = "pci";
+	interrupts = <24 0x2 0 0>;
+	bus-range = <0 0xff>;
+	#interrupt-cells = <1>;
+	#size-cells = <2>;
+	#address-cells = <3>;
+};
+
+/* controller at 0x9000 */
+&pci1 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <25 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <25 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+			>;
+	};
+};
+
+/* controller at 0xa000 */
+&pci2 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <26 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <26 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+			>;
+	};
+};
+
+/* controller at 0xb000 */
+&pci3 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <27 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <27 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
+			>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,mpc8544-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <10>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,mpc8544-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <17 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,mpc8544-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <18 2 0 0>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,mpc8544-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x40000>; // L2, 256K
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-etsec1-0.dtsi"
+/include/ "pq3-etsec1-2.dtsi"
+
+	ethernet@26000 {
+		cell-index = <1>;
+	};
+
+/include/ "pq3-sec2.1-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+
+	global-utilities@e0000 {
+		compatible = "fsl,mpc8544-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8544si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8544si-pre.dtsi
new file mode 100644
index 0000000..8777f92
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8544si-pre.dtsi
@@ -0,0 +1,63 @@
+/*
+ * MPC8544 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+	compatible = "fsl,MPC8544";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet2;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		pci3 = &pci3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8544@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi
new file mode 100644
index 0000000..9d8023a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi
@@ -0,0 +1,143 @@
+/*
+ * MPC8548 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,mpc8548-lbc", "fsl,pq3-localbus", "simple-bus";
+	interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x8000 */
+&pci0 {
+	compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+	device_type = "pci";
+	interrupts = <24 0x2 0 0>;
+	bus-range = <0 0xff>;
+	#interrupt-cells = <1>;
+	#size-cells = <2>;
+	#address-cells = <3>;
+};
+
+/* controller at 0x9000 */
+&pci1 {
+	compatible = "fsl,mpc8540-pci";
+	device_type = "pci";
+	interrupts = <25 0x2 0 0>;
+	bus-range = <0 0xff>;
+	#interrupt-cells = <1>;
+	#size-cells = <2>;
+	#address-cells = <3>;
+};
+
+/* controller at 0xa000 */
+&pci2 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <26 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <26 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+			>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,mpc8548-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <10>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,mpc8548-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <17 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,mpc8548-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <18 2 0 0>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,mpc8548-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x80000>; // L2, 512K
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-etsec1-0.dtsi"
+/include/ "pq3-etsec1-1.dtsi"
+/include/ "pq3-etsec1-2.dtsi"
+/include/ "pq3-etsec1-3.dtsi"
+
+/include/ "pq3-sec2.1-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+
+	global-utilities@e0000 {
+		compatible = "fsl,mpc8548-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi
new file mode 100644
index 0000000..289f121
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi
@@ -0,0 +1,62 @@
+/*
+ * MPC8548 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+	compatible = "fsl,MPC8548";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet2;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8548@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi
new file mode 100644
index 0000000..64e7075
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi
@@ -0,0 +1,270 @@
+/*
+ * MPC8568 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,mpc8568-localbus", "fsl,pq3-localbus", "simple-bus";
+	interrupts = <19 2 0 0>;
+	sleep = <&pmc 0x08000000>;
+};
+
+/* controller at 0x8000 */
+&pci0 {
+	compatible = "fsl,mpc8540-pci";
+	device_type = "pci";
+	interrupts = <24 0x2 0 0>;
+	bus-range = <0 0xff>;
+	#interrupt-cells = <1>;
+	#size-cells = <2>;
+	#address-cells = <3>;
+	sleep = <&pmc 0x80000000>;
+};
+
+/* controller at 0xa000 */
+&pci1 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <26 2 0 0>;
+	sleep = <&pmc 0x20000000>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <26 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+			>;
+	};
+};
+
+&rio {
+	compatible = "fsl,srio";
+	interrupts = <48 2 0 0>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+	fsl,srio-rmu-handle = <&rmu>;
+	sleep = <&pmc 0x00080000>;
+	ranges;
+
+	port1 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <1>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,mpc8568-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <10>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,mpc8568-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <17 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,mpc8568-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <18 2 0 0>;
+	};
+
+	i2c-sleep-nexus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		sleep = <&pmc 0x00000004>;
+		ranges;
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+
+	};
+
+	duart-sleep-nexus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		sleep = <&pmc 0x00000002>;
+		ranges;
+
+/include/ "pq3-duart-0.dtsi"
+
+	};
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,mpc8568-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x80000>; // L2, 512K
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+	dma@21300 {
+		sleep = <&pmc 0x00000400>;
+	};
+
+/include/ "pq3-etsec1-0.dtsi"
+	ethernet@24000 {
+		sleep = <&pmc 0x00000080>;
+	};
+
+/include/ "pq3-etsec1-1.dtsi"
+	ethernet@25000 {
+		sleep = <&pmc 0x00000040>;
+	};
+
+	par_io@e0100 {
+		reg = <0xe0100 0x100>;
+		device_type = "par_io";
+	};
+
+/include/ "pq3-sec2.1-0.dtsi"
+	crypto@30000 {
+		sleep = <&pmc 0x01000000>;
+	};
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-rmu-0.dtsi"
+	rmu@d3000 {
+		sleep = <&pmc 0x00040000>;
+	};
+
+	global-utilities@e0000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8568-guts", "fsl,mpc8548-guts";
+		reg = <0xe0000 0x1000>;
+		ranges = <0 0xe0000 0x1000>;
+		fsl,has-rstcr;
+
+		pmc: power@70 {
+			compatible = "fsl,mpc8568-pmc",
+				     "fsl,mpc8548-pmc";
+			reg = <0x70 0x20>;
+		};
+	};
+};
+
+&qe {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "qe";
+	compatible = "fsl,qe";
+	sleep = <&pmc 0x00000800>;
+	brg-frequency = <0>;
+	bus-frequency = <396000000>;
+	fsl,qe-num-riscs = <2>;
+	fsl,qe-num-snums = <28>;
+
+	qeic: interrupt-controller@80 {
+		interrupt-controller;
+		compatible = "fsl,qe-ic";
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x80 0x80>;
+		interrupts = <46 2 0 0 46 2 0 0>; //high:30 low:30
+		interrupt-parent = <&mpic>;
+	};
+
+	spi@4c0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,spi";
+		reg = <0x4c0 0x40>;
+		cell-index = <0>;
+		interrupts = <2>;
+		interrupt-parent = <&qeic>;
+	};
+
+	spi@500 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cell-index = <1>;
+		compatible = "fsl,spi";
+		reg = <0x500 0x40>;
+		interrupts = <1>;
+		interrupt-parent = <&qeic>;
+	};
+
+	ucc@2000 {
+		cell-index = <1>;
+		reg = <0x2000 0x200>;
+		interrupts = <32>;
+		interrupt-parent = <&qeic>;
+	};
+
+	ucc@3000 {
+		cell-index = <2>;
+		reg = <0x3000 0x200>;
+		interrupts = <33>;
+		interrupt-parent = <&qeic>;
+	};
+
+	muram@10000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,qe-muram", "fsl,cpm-muram";
+		ranges = <0x0 0x10000 0x10000>;
+
+		data-only@0 {
+			compatible = "fsl,qe-muram-data",
+				     "fsl,cpm-muram-data";
+			reg = <0x0 0x10000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8568si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8568si-pre.dtsi
new file mode 100644
index 0000000..eacd62c
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8568si-pre.dtsi
@@ -0,0 +1,65 @@
+/*
+ * MPC8568 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+	compatible = "fsl,MPC8568";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8568@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+			sleep = <&pmc 0x00008000	// core
+				 &pmc 0x00004000>;	// timebase
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8569si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8569si-post.dtsi
new file mode 100644
index 0000000..3e6346a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8569si-post.dtsi
@@ -0,0 +1,304 @@
+/*
+ * MPC8569 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,mpc8569-elbc", "fsl,elbc", "simple-bus";
+	interrupts = <19 2 0 0>;
+	sleep = <&pmc 0x08000000>;
+};
+
+/* controller at 0xa000 */
+&pci1 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <26 2 0 0>;
+	sleep = <&pmc 0x20000000>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <26 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+			>;
+	};
+};
+
+&rio {
+	compatible = "fsl,srio";
+	interrupts = <48 2 0 0>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+	fsl,srio-rmu-handle = <&rmu>;
+	sleep = <&pmc 0x00080000>;
+	ranges;
+
+	port1 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <1>;
+	};
+
+	port2 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <2>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,mpc8569-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <10>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,mpc8569-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <17 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,mpc8569-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <18 2 0 0>;
+	};
+
+	i2c-sleep-nexus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		sleep = <&pmc 0x00000004>;
+		ranges;
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+
+	};
+
+	duart-sleep-nexus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		sleep = <&pmc 0x00000002>;
+		ranges;
+
+/include/ "pq3-duart-0.dtsi"
+
+	};
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,mpc8569-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x80000>; // L2, 512K
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-esdhc-0.dtsi"
+	sdhc@2e000 {
+		sleep = <&pmc 0x00200000>;
+	};
+
+	par_io@e0100 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0xe0100 0x100>;
+		ranges = <0x0 0xe0100 0x100>;
+		device_type = "par_io";
+	};
+
+/include/ "pq3-sec3.1-0.dtsi"
+	crypto@30000 {
+		sleep = <&pmc 0x01000000>;
+	};
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-rmu-0.dtsi"
+	rmu@d3000 {
+		sleep = <&pmc 0x00040000>;
+	};
+
+	global-utilities@e0000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8569-guts", "fsl,mpc8548-guts";
+		reg = <0xe0000 0x1000>;
+		ranges = <0 0xe0000 0x1000>;
+		fsl,has-rstcr;
+
+		pmc: power@70 {
+			compatible = "fsl,mpc8569-pmc",
+				     "fsl,mpc8548-pmc";
+			reg = <0x70 0x20>;
+		};
+	};
+};
+
+&qe {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "qe";
+	compatible = "fsl,qe";
+	sleep = <&pmc 0x00000800>;
+	brg-frequency = <0>;
+	bus-frequency = <0>;
+	fsl,qe-num-riscs = <4>;
+	fsl,qe-num-snums = <46>;
+
+	qeic: interrupt-controller@80 {
+		interrupt-controller;
+		compatible = "fsl,qe-ic";
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x80 0x80>;
+		interrupts = <46 2 0 0 46 2 0 0>; //high:30 low:30
+		interrupt-parent = <&mpic>;
+	};
+
+	timer@440 {
+		compatible = "fsl,mpc8569-qe-gtm",
+			     "fsl,qe-gtm", "fsl,gtm";
+		reg = <0x440 0x40>;
+		interrupts = <12 13 14 15>;
+		interrupt-parent = <&qeic>;
+		/* Filled in by U-Boot */
+		clock-frequency = <0>;
+	};
+
+	spi@4c0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,mpc8569-qe-spi", "fsl,spi";
+		reg = <0x4c0 0x40>;
+		cell-index = <0>;
+		interrupts = <2>;
+		interrupt-parent = <&qeic>;
+	};
+
+	spi@500 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cell-index = <1>;
+		compatible = "fsl,spi";
+		reg = <0x500 0x40>;
+		interrupts = <1>;
+		interrupt-parent = <&qeic>;
+	};
+
+	usb@6c0 {
+		compatible = "fsl,mpc8569-qe-usb",
+			     "fsl,mpc8323-qe-usb";
+		reg = <0x6c0 0x40 0x8b00 0x100>;
+		interrupts = <11>;
+		interrupt-parent = <&qeic>;
+	};
+
+	ucc@2000 {
+		cell-index = <1>;
+		reg = <0x2000 0x200>;
+		interrupts = <32>;
+		interrupt-parent = <&qeic>;
+	};
+
+	ucc@2200 {
+		cell-index = <3>;
+		reg = <0x2200 0x200>;
+		interrupts = <34>;
+		interrupt-parent = <&qeic>;
+	};
+
+	ucc@3000 {
+		cell-index = <2>;
+		reg = <0x3000 0x200>;
+		interrupts = <33>;
+		interrupt-parent = <&qeic>;
+	};
+
+	ucc@3200 {
+		cell-index = <4>;
+		reg = <0x3200 0x200>;
+		interrupts = <35>;
+		interrupt-parent = <&qeic>;
+	};
+
+	ucc@3400 {
+		cell-index = <6>;
+		reg = <0x3400 0x200>;
+		interrupts = <41>;
+		interrupt-parent = <&qeic>;
+	};
+
+	ucc@3600 {
+		cell-index = <8>;
+		reg = <0x3600 0x200>;
+		interrupts = <43>;
+		interrupt-parent = <&qeic>;
+	};
+
+	muram@10000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,qe-muram", "fsl,cpm-muram";
+		ranges = <0x0 0x10000 0x20000>;
+
+		data-only@0 {
+			compatible = "fsl,qe-muram-data",
+				     "fsl,cpm-muram-data";
+			reg = <0x0 0x20000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8569si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8569si-pre.dtsi
new file mode 100644
index 0000000..b07064d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8569si-pre.dtsi
@@ -0,0 +1,64 @@
+/*
+ * MPC8569 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+	compatible = "fsl,MPC8569";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8569@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+			sleep = <&pmc 0x00008000	// core
+				 &pmc 0x00004000>;	// timebase
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi
new file mode 100644
index 0000000..d44e25a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi
@@ -0,0 +1,196 @@
+/*
+ * MPC8572 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
+	interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x8000 */
+&pci0 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <24 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <24 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
+			>;
+	};
+};
+
+/* controller at 0x9000 */
+&pci1 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <25 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <25 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+			>;
+	};
+};
+
+/* controller at 0xa000 */
+&pci2 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <26 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <26 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+			>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,mpc8572-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <12>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,mpc8572-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <17 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,mpc8572-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <18 2 0 0>;
+	};
+
+	memory-controller@6000 {
+		compatible = "fsl,mpc8572-memory-controller";
+		reg = <0x6000 0x1000>;
+		interrupts = <18 2 0 0>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+/include/ "pq3-dma-1.dtsi"
+/include/ "pq3-gpio-0.dtsi"
+	gpio-controller@f000 {
+		compatible = "fsl,mpc8572-gpio", "fsl,pq3-gpio";
+	};
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,mpc8572-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x100000>; // L2,1M
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-etsec1-0.dtsi"
+/include/ "pq3-etsec1-timer-0.dtsi"
+
+	ptp_clock@24e00 {
+		interrupts = <68 2 0 0 69 2 0 0 70 2 0 0 71 2 0 0>;
+	};
+
+/include/ "pq3-etsec1-1.dtsi"
+/include/ "pq3-etsec1-2.dtsi"
+/include/ "pq3-etsec1-3.dtsi"
+/include/ "pq3-sec3.0-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+	global-utilities@e0000 {
+		compatible = "fsl,mpc8572-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi
new file mode 100644
index 0000000..ca18832
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi
@@ -0,0 +1,70 @@
+/*
+ * MPC8572 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+	compatible = "fsl,MPC8572";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8572@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,8572@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
new file mode 100644
index 0000000..bd9e163
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
@@ -0,0 +1,198 @@
+/*
+ * P1010/P1014 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,ifc", "simple-bus";
+	interrupts = <16 2 0 0 19 2 0 0>;
+};
+
+/* controller at 0x9000 */
+&pci0 {
+	compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+			>;
+	};
+};
+
+/* controller at 0xa000 */
+&pci1 {
+	compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+			>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,p1010-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <12>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,p1010-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,p1010-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+/include/ "pq3-espi-0.dtsi"
+	spi0: spi@7000 {
+		fsl,espi-num-chipselects = <1>;
+	};
+
+/include/ "pq3-gpio-0.dtsi"
+/include/ "pq3-sata2-0.dtsi"
+/include/ "pq3-sata2-1.dtsi"
+
+	can0: can@1c000 {
+		compatible = "fsl,p1010-flexcan";
+		reg = <0x1c000 0x1000>;
+		interrupts = <48 0x2 0 0>;
+	};
+
+	can1: can@1d000 {
+		compatible = "fsl,p1010-flexcan";
+		reg = <0x1d000 0x1000>;
+		interrupts = <61 0x2 0 0>;
+	};
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,p1010-l2-cache-controller",
+				"fsl,p1014-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x40000>; // L2,256K
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+/include/ "pq3-esdhc-0.dtsi"
+	sdhc@2e000 {
+		fsl,sdhci-auto-cmd12;
+	};
+
+/include/ "pq3-sec4.4-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+	enet0: ethernet@b0000 {
+		queue-group@b0000 {
+			fsl,rx-bit-map = <0xff>;
+			fsl,tx-bit-map = <0xff>;
+		};
+	};
+
+/include/ "pq3-etsec2-1.dtsi"
+	enet1: ethernet@b1000 {
+		queue-group@b1000 {
+			fsl,rx-bit-map = <0xff>;
+			fsl,tx-bit-map = <0xff>;
+		};
+	};
+
+/include/ "pq3-etsec2-2.dtsi"
+	enet2: ethernet@b2000 {
+		queue-group@b2000 {
+			fsl,rx-bit-map = <0xff>;
+			fsl,tx-bit-map = <0xff>;
+		};
+
+	};
+
+	global-utilities@e0000 {
+		compatible = "fsl,p1010-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1010si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-pre.dtsi
new file mode 100644
index 0000000..7354a8f
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1010si-pre.dtsi
@@ -0,0 +1,64 @@
+/*
+ * P1010/P1014 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+	compatible = "fsl,P1010";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		can0 = &can0;
+		can1 = &can1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,P1010@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi
new file mode 100644
index 0000000..fc924c5
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi
@@ -0,0 +1,174 @@
+/*
+ * P1020/P1011 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus";
+	interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x9000 */
+&pci0 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+			>;
+	};
+};
+
+/* controller at 0xa000 */
+&pci1 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+			>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,p1020-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <12>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,p1020-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,p1020-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+/include/ "pq3-espi-0.dtsi"
+	spi@7000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "pq3-gpio-0.dtsi"
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,p1020-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x40000>; // L2,256K
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+/include/ "pq3-usb2-dr-1.dtsi"
+
+/include/ "pq3-esdhc-0.dtsi"
+/include/ "pq3-sec3.3-0.dtsi"
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+	enet0: enet0_grp2: ethernet@b0000 {
+	};
+
+/include/ "pq3-etsec2-1.dtsi"
+	enet1: enet1_grp2: ethernet@b1000 {
+	};
+
+/include/ "pq3-etsec2-2.dtsi"
+	enet2: enet2_grp2: ethernet@b2000 {
+	};
+
+	global-utilities@e0000 {
+		compatible = "fsl,p1020-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+};
+
+/include/ "pq3-etsec2-grp2-0.dtsi"
+/include/ "pq3-etsec2-grp2-1.dtsi"
+/include/ "pq3-etsec2-grp2-2.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi
new file mode 100644
index 0000000..6f0376e
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi
@@ -0,0 +1,68 @@
+/*
+ * P1020/P1011 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+	compatible = "fsl,P1020";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,P1020@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,P1020@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi
new file mode 100644
index 0000000..38ba54d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi
@@ -0,0 +1,225 @@
+/*
+ * P1021/P1012 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus";
+	interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x9000 */
+&pci0 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+			>;
+	};
+};
+
+/* controller at 0xa000 */
+&pci1 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+			>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,p1021-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <12>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,p1021-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,p1021-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+/include/ "pq3-espi-0.dtsi"
+	spi@7000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "pq3-gpio-0.dtsi"
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,p1021-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x40000>; // L2,256K
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+
+/include/ "pq3-esdhc-0.dtsi"
+/include/ "pq3-sec3.3-0.dtsi"
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+	enet0: enet0_grp2: ethernet@b0000 {
+	};
+
+/include/ "pq3-etsec2-1.dtsi"
+	enet1: enet1_grp2: ethernet@b1000 {
+	};
+
+/include/ "pq3-etsec2-2.dtsi"
+	enet2: enet2_grp2: ethernet@b2000 {
+	};
+
+	global-utilities@e0000 {
+		compatible = "fsl,p1021-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+};
+
+&qe {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "qe";
+	compatible = "fsl,qe";
+	fsl,qe-num-riscs = <1>;
+	fsl,qe-num-snums = <28>;
+
+	qeic: interrupt-controller@80 {
+		interrupt-controller;
+		compatible = "fsl,qe-ic";
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x80 0x80>;
+		interrupts = <63 2 0 0 60 2 0 0>; //high:47 low:44
+	};
+
+	ucc@2000 {
+		cell-index = <1>;
+		reg = <0x2000 0x200>;
+		interrupts = <32>;
+		interrupt-parent = <&qeic>;
+	};
+
+	mdio@2120 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x2120 0x18>;
+		compatible = "fsl,ucc-mdio";
+	};
+
+	ucc@2400 {
+		cell-index = <5>;
+		reg = <0x2400 0x200>;
+		interrupts = <40>;
+		interrupt-parent = <&qeic>;
+	};
+
+	muram@10000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,qe-muram", "fsl,cpm-muram";
+		ranges = <0x0 0x10000 0x6000>;
+
+		data-only@0 {
+			compatible = "fsl,qe-muram-data",
+			"fsl,cpm-muram-data";
+			reg = <0x0 0x6000>;
+		};
+	};
+};
+
+/include/ "pq3-etsec2-grp2-0.dtsi"
+/include/ "pq3-etsec2-grp2-1.dtsi"
+/include/ "pq3-etsec2-grp2-2.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi
new file mode 100644
index 0000000..4abd54b
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi
@@ -0,0 +1,68 @@
+/*
+ * P1021/P1012 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+	compatible = "fsl,P1021";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,P1021@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,P1021@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi
new file mode 100644
index 0000000..16239b1
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi
@@ -0,0 +1,235 @@
+/*
+ * P1022/P1013 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus";
+	interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x9000 */
+&pci0 {
+	compatible = "fsl,p1022-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+			>;
+	};
+};
+
+/* controller at 0xa000 */
+&pci1 {
+	compatible = "fsl,p1022-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+			>;
+	};
+};
+
+/* controller at 0xb000 */
+&pci2 {
+	compatible = "fsl,p1022-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
+			>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,p1022-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <12>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,p1022-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,p1022-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+/include/ "pq3-espi-0.dtsi"
+	spi@7000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "pq3-dma-1.dtsi"
+	dma@c300 {
+		dma00: dma-channel@0 {
+			compatible = "fsl,ssi-dma-channel";
+		};
+		dma01: dma-channel@80 {
+			compatible = "fsl,ssi-dma-channel";
+		};
+	};
+
+/include/ "pq3-gpio-0.dtsi"
+
+	display@10000 {
+		compatible = "fsl,diu", "fsl,p1022-diu";
+		reg = <0x10000 1000>;
+		interrupts = <64 2 0 0>;
+	};
+
+	ssi@15000 {
+		compatible = "fsl,mpc8610-ssi";
+		cell-index = <0>;
+		reg = <0x15000 0x100>;
+		interrupts = <75 2 0 0>;
+		fsl,playback-dma = <&dma00>;
+		fsl,capture-dma = <&dma01>;
+		fsl,fifo-depth = <15>;
+	};
+
+/include/ "pq3-sata2-0.dtsi"
+/include/ "pq3-sata2-1.dtsi"
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,p1022-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x40000>; // L2,256K
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+/include/ "pq3-usb2-dr-1.dtsi"
+
+/include/ "pq3-esdhc-0.dtsi"
+	sdhc@2e000 {
+		fsl,sdhci-auto-cmd12;
+	};
+
+/include/ "pq3-sec3.3-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+	enet0: enet0_grp2: ethernet@b0000 {
+	};
+
+/include/ "pq3-etsec2-1.dtsi"
+	enet1: enet1_grp2: ethernet@b1000 {
+	};
+
+	global-utilities@e0000 {
+		compatible = "fsl,p1022-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+
+	power@e0070{
+		compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc";
+		reg = <0xe0070 0x20>;
+	};
+
+};
+
+/include/ "pq3-etsec2-grp2-0.dtsi"
+/include/ "pq3-etsec2-grp2-1.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi
new file mode 100644
index 0000000..e930f4f
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi
@@ -0,0 +1,68 @@
+/*
+ * P1022/P1013 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+	compatible = "fsl,P1022";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,P1022@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,P1022@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi
new file mode 100644
index 0000000..b06bb4c
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi
@@ -0,0 +1,224 @@
+/*
+ * P1023/P1017 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,p1023-elbc", "fsl,elbc", "simple-bus";
+	interrupts = <19 2 0 0>;
+};
+
+/* controller at 0xa000 */
+&pci0 {
+	compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 0 0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+	};
+};
+
+/* controller at 0x9000 */
+&pci1 {
+	compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 0 0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+	};
+};
+
+/* controller at 0xb000 */
+&pci2 {
+	compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 0 0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,p1023-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <12>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,p1023-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,p1023-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+/include/ "pq3-espi-0.dtsi"
+	spi@7000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "pq3-gpio-0.dtsi"
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,p1023-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x40000>; // L2,256K
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+
+	crypto: crypto@300000 {
+		compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x30000 0x10000>;
+		ranges = <0 0x30000 0x10000>;
+		interrupts = <58 2 0 0>;
+
+		sec_jr0: jr@1000 {
+			compatible = "fsl,sec-v4.2-job-ring",
+				     "fsl,sec-v4.0-job-ring";
+			reg = <0x1000 0x1000>;
+			interrupts = <45 2 0 0>;
+		};
+
+		sec_jr1: jr@2000 {
+			compatible = "fsl,sec-v4.2-job-ring",
+				     "fsl,sec-v4.0-job-ring";
+			reg = <0x2000 0x1000>;
+			interrupts = <45 2 0 0>;
+		};
+
+		sec_jr2: jr@3000 {
+			compatible = "fsl,sec-v4.2-job-ring",
+				     "fsl,sec-v4.0-job-ring";
+			reg = <0x3000 0x1000>;
+			interrupts = <57 2 0 0>;
+		};
+
+		sec_jr3: jr@4000 {
+			compatible = "fsl,sec-v4.2-job-ring",
+				     "fsl,sec-v4.0-job-ring";
+			reg = <0x4000 0x1000>;
+			interrupts = <57 2 0 0>;
+		};
+
+		rtic@6000 {
+			compatible = "fsl,sec-v4.2-rtic",
+				     "fsl,sec-v4.0-rtic";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x6000 0x100>;
+			ranges = <0x0 0x6100 0xe00>;
+
+			rtic_a: rtic-a@0 {
+				compatible = "fsl,sec-v4.2-rtic-memory",
+					     "fsl,sec-v4.0-rtic-memory";
+				reg = <0x00 0x20 0x100 0x80>;
+			};
+
+			rtic_b: rtic-b@20 {
+				compatible = "fsl,sec-v4.2-rtic-memory",
+					     "fsl,sec-v4.0-rtic-memory";
+				reg = <0x20 0x20 0x200 0x80>;
+			};
+
+			rtic_c: rtic-c@40 {
+				compatible = "fsl,sec-v4.2-rtic-memory",
+					     "fsl,sec-v4.0-rtic-memory";
+				reg = <0x40 0x20 0x300 0x80>;
+			};
+
+			rtic_d: rtic-d@60 {
+				compatible = "fsl,sec-v4.2-rtic-memory",
+					     "fsl,sec-v4.0-rtic-memory";
+				reg = <0x60 0x20 0x500 0x80>;
+			};
+		};
+	};
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+	global-utilities@e0000 {
+		compatible = "fsl,p1023-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi
new file mode 100644
index 0000000..ac45f6d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi
@@ -0,0 +1,76 @@
+/*
+ * P1023/P1017 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+	compatible = "fsl,P1023";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+
+		crypto = &crypto;
+		sec_jr0 = &sec_jr0;
+		sec_jr1 = &sec_jr1;
+		sec_jr2 = &sec_jr2;
+		sec_jr3 = &sec_jr3;
+		rtic_a = &rtic_a;
+		rtic_b = &rtic_b;
+		rtic_c = &rtic_c;
+		rtic_d = &rtic_d;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,P1023@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,P1023@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi
new file mode 100644
index 0000000..c041050
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi
@@ -0,0 +1,194 @@
+/*
+ * P2020/P2010 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus";
+	interrupts = <19 2 0 0>;
+};
+
+/* controller at 0xa000 */
+&pci0 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <26 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <26 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+			>;
+	};
+};
+
+/* controller at 0x9000 */
+&pci1 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <25 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <25 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+			>;
+	};
+};
+
+/* controller at 0x8000 */
+&pci2 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <24 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <24 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
+			>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,p2020-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <12>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,p2020-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <17 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,p2020-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <18 2 0 0>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+/include/ "pq3-espi-0.dtsi"
+	spi0: spi@7000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "pq3-dma-1.dtsi"
+/include/ "pq3-gpio-0.dtsi"
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,p2020-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x80000>; // L2,512K
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+/include/ "pq3-etsec1-0.dtsi"
+/include/ "pq3-etsec1-timer-0.dtsi"
+
+	ptp_clock@24e00 {
+		interrupts = <68 2 0 0 69 2 0 0 70 2 0 0>;
+	};
+
+
+/include/ "pq3-etsec1-1.dtsi"
+/include/ "pq3-etsec1-2.dtsi"
+/include/ "pq3-esdhc-0.dtsi"
+/include/ "pq3-sec3.1-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+	global-utilities@e0000 {
+		compatible = "fsl,p2020-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p2020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p2020si-pre.dtsi
new file mode 100644
index 0000000..3213288
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p2020si-pre.dtsi
@@ -0,0 +1,69 @@
+/*
+ * P2020/P2010 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+	compatible = "fsl,P2020";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,P2020@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,P2020@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
new file mode 100644
index 0000000..234a399
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
@@ -0,0 +1,325 @@
+/*
+ * P2041/P2040 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	compatible = "fsl,p2041-elbc", "fsl,elbc", "simple-bus";
+	interrupts = <25 2 0 0>;
+	#address-cells = <2>;
+	#size-cells = <1>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+	compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 15>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 15>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 40 1 0 0
+			0000 0 0 2 &mpic 1 1 0 0
+			0000 0 0 3 &mpic 2 1 0 0
+			0000 0 0 4 &mpic 3 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x201000 */
+&pci1 {
+	compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 14>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 14>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 41 1 0 0
+			0000 0 0 2 &mpic 5 1 0 0
+			0000 0 0 3 &mpic 6 1 0 0
+			0000 0 0 4 &mpic 7 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x202000 */
+&pci2 {
+	compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 13>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 13>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 42 1 0 0
+			0000 0 0 2 &mpic 9 1 0 0
+			0000 0 0 3 &mpic 10 1 0 0
+			0000 0 0 4 &mpic 11 1 0 0
+			>;
+	};
+};
+
+&rio {
+	compatible = "fsl,srio";
+	interrupts = <16 2 1 11>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+	ranges;
+
+	port1 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <1>;
+	};
+
+	port2 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <2>;
+	};
+};
+
+&dcsr {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,dcsr", "simple-bus";
+
+	dcsr-epu@0 {
+		compatible = "fsl,dcsr-epu";
+		interrupts = <52 2 0 0
+			      84 2 0 0
+			      85 2 0 0>;
+		reg = <0x0 0x1000>;
+	};
+	dcsr-npc {
+		compatible = "fsl,dcsr-npc";
+		reg = <0x1000 0x1000 0x1000000 0x8000>;
+	};
+	dcsr-nxc@2000 {
+		compatible = "fsl,dcsr-nxc";
+		reg = <0x2000 0x1000>;
+	};
+	dcsr-corenet {
+		compatible = "fsl,dcsr-corenet";
+		reg = <0x8000 0x1000 0xB0000 0x1000>;
+	};
+	dcsr-dpaa@9000 {
+		compatible = "fsl,p2041-dcsr-dpaa", "fsl,dcsr-dpaa";
+		reg = <0x9000 0x1000>;
+	};
+	dcsr-ocn@11000 {
+		compatible = "fsl,p2041-dcsr-ocn", "fsl,dcsr-ocn";
+		reg = <0x11000 0x1000>;
+	};
+	dcsr-ddr@12000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr1>;
+		reg = <0x12000 0x1000>;
+	};
+	dcsr-nal@18000 {
+		compatible = "fsl,p2041-dcsr-nal", "fsl,dcsr-nal";
+		reg = <0x18000 0x1000>;
+	};
+	dcsr-rcpm@22000 {
+		compatible = "fsl,p2041-dcsr-rcpm", "fsl,dcsr-rcpm";
+		reg = <0x22000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@40000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu0>;
+		reg = <0x40000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@41000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu1>;
+		reg = <0x41000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@42000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu2>;
+		reg = <0x42000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@43000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu3>;
+		reg = <0x43000 0x1000>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+
+	soc-sram-error {
+		compatible = "fsl,soc-sram-error";
+		interrupts = <16 2 1 29>;
+	};
+
+	corenet-law@0 {
+		compatible = "fsl,corenet-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <32>;
+	};
+
+	ddr1: memory-controller@8000 {
+		compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+		reg = <0x8000 0x1000>;
+		interrupts = <16 2 1 23>;
+	};
+
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,p2041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
+		reg = <0x10000 0x1000>;
+		interrupts = <16 2 1 27>;
+	};
+
+	corenet-cf@18000 {
+		compatible = "fsl,corenet-cf";
+		reg = <0x18000 0x1000>;
+		interrupts = <16 2 1 31>;
+		fsl,ccf-num-csdids = <32>;
+		fsl,ccf-num-snoopids = <32>;
+	};
+
+	iommu@20000 {
+		compatible = "fsl,pamu-v1.0", "fsl,pamu";
+		reg = <0x20000 0x4000>;
+		interrupts = <
+			24 2 0 0
+			16 2 1 30>;
+	};
+
+/include/ "qoriq-mpic.dtsi"
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,qoriq-device-config-1.0";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		#sleep-cells = <1>;
+		fsl,liodn-bits = <12>;
+	};
+
+	pins: global-utilities@e0e00 {
+		compatible = "fsl,qoriq-pin-control-1.0";
+		reg = <0xe0e00 0x200>;
+		#sleep-cells = <2>;
+	};
+
+	clockgen: global-utilities@e1000 {
+		compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0";
+		reg = <0xe1000 0x1000>;
+		clock-frequency = <0>;
+	};
+
+	rcpm: global-utilities@e2000 {
+		compatible = "fsl,qoriq-rcpm-1.0";
+		reg = <0xe2000 0x1000>;
+		#sleep-cells = <1>;
+	};
+
+	sfp: sfp@e8000 {
+		compatible = "fsl,p2041-sfp", "fsl,qoriq-sfp-1.0";
+		reg	   = <0xe8000 0x1000>;
+	};
+
+	serdes: serdes@ea000 {
+		compatible = "fsl,p2041-serdes";
+		reg	   = <0xea000 0x1000>;
+	};
+
+/include/ "qoriq-dma-0.dtsi"
+/include/ "qoriq-dma-1.dtsi"
+/include/ "qoriq-espi-0.dtsi"
+	spi@110000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "qoriq-esdhc-0.dtsi"
+	sdhc@114000 {
+		sdhci,auto-cmd12;
+	};
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+		usb0: usb@210000 {
+			phy_type = "utmi";
+			port0;
+		};
+
+/include/ "qoriq-usb2-dr-0.dtsi"
+		usb1: usb@211000 {
+			dr_mode = "host";
+			phy_type = "utmi";
+		};
+
+/include/ "qoriq-sata2-0.dtsi"
+/include/ "qoriq-sata2-1.dtsi"
+/include/ "qoriq-sec4.2-0.dtsi"
+};
diff --git a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
new file mode 100644
index 0000000..2d0a40d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
@@ -0,0 +1,111 @@
+/*
+ * P2041 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+	compatible = "fsl,P2041";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+		dcsr = &dcsr;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		dma0 = &dma0;
+		dma1 = &dma1;
+		sdhc = &sdhc;
+		msi0 = &msi0;
+		msi1 = &msi1;
+		msi2 = &msi2;
+
+		crypto = &crypto;
+		sec_jr0 = &sec_jr0;
+		sec_jr1 = &sec_jr1;
+		sec_jr2 = &sec_jr2;
+		sec_jr3 = &sec_jr3;
+		rtic_a = &rtic_a;
+		rtic_b = &rtic_b;
+		rtic_c = &rtic_c;
+		rtic_d = &rtic_d;
+		sec_mon = &sec_mon;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e500mc@0 {
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu1: PowerPC,e500mc@1 {
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2_1>;
+			L2_1: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu2: PowerPC,e500mc@2 {
+			device_type = "cpu";
+			reg = <2>;
+			next-level-cache = <&L2_2>;
+			L2_2: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu3: PowerPC,e500mc@3 {
+			device_type = "cpu";
+			reg = <3>;
+			next-level-cache = <&L2_3>;
+			L2_3: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
new file mode 100644
index 0000000..d41d08d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
@@ -0,0 +1,352 @@
+/*
+ * P3041 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	compatible = "fsl,p3041-elbc", "fsl,elbc", "simple-bus";
+	interrupts = <25 2 0 0>;
+	#address-cells = <2>;
+	#size-cells = <1>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+	compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 15>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 15>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 40 1 0 0
+			0000 0 0 2 &mpic 1 1 0 0
+			0000 0 0 3 &mpic 2 1 0 0
+			0000 0 0 4 &mpic 3 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x201000 */
+&pci1 {
+	compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 14>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 14>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 41 1 0 0
+			0000 0 0 2 &mpic 5 1 0 0
+			0000 0 0 3 &mpic 6 1 0 0
+			0000 0 0 4 &mpic 7 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x202000 */
+&pci2 {
+	compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 13>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 13>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 42 1 0 0
+			0000 0 0 2 &mpic 9 1 0 0
+			0000 0 0 3 &mpic 10 1 0 0
+			0000 0 0 4 &mpic 11 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x203000 */
+&pci3 {
+	compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 12>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 12>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 43 1 0 0
+			0000 0 0 2 &mpic 0 1 0 0
+			0000 0 0 3 &mpic 4 1 0 0
+			0000 0 0 4 &mpic 8 1 0 0
+			>;
+	};
+};
+
+&rio {
+	compatible = "fsl,srio";
+	interrupts = <16 2 1 11>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+	ranges;
+
+	port1 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <1>;
+	};
+
+	port2 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <2>;
+	};
+};
+
+&dcsr {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,dcsr", "simple-bus";
+
+	dcsr-epu@0 {
+		compatible = "fsl,dcsr-epu";
+		interrupts = <52 2 0 0
+			      84 2 0 0
+			      85 2 0 0>;
+		reg = <0x0 0x1000>;
+	};
+	dcsr-npc {
+		compatible = "fsl,dcsr-npc";
+		reg = <0x1000 0x1000 0x1000000 0x8000>;
+	};
+	dcsr-nxc@2000 {
+		compatible = "fsl,dcsr-nxc";
+		reg = <0x2000 0x1000>;
+	};
+	dcsr-corenet {
+		compatible = "fsl,dcsr-corenet";
+		reg = <0x8000 0x1000 0xB0000 0x1000>;
+	};
+	dcsr-dpaa@9000 {
+		compatible = "fsl,p3041-dcsr-dpaa", "fsl,dcsr-dpaa";
+		reg = <0x9000 0x1000>;
+	};
+	dcsr-ocn@11000 {
+		compatible = "fsl,p3041-dcsr-ocn", "fsl,dcsr-ocn";
+		reg = <0x11000 0x1000>;
+	};
+	dcsr-ddr@12000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr1>;
+		reg = <0x12000 0x1000>;
+	};
+	dcsr-nal@18000 {
+		compatible = "fsl,p3041-dcsr-nal", "fsl,dcsr-nal";
+		reg = <0x18000 0x1000>;
+	};
+	dcsr-rcpm@22000 {
+		compatible = "fsl,p3041-dcsr-rcpm", "fsl,dcsr-rcpm";
+		reg = <0x22000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@40000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu0>;
+		reg = <0x40000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@41000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu1>;
+		reg = <0x41000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@42000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu2>;
+		reg = <0x42000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@43000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu3>;
+		reg = <0x43000 0x1000>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+
+	soc-sram-error {
+		compatible = "fsl,soc-sram-error";
+		interrupts = <16 2 1 29>;
+	};
+
+	corenet-law@0 {
+		compatible = "fsl,corenet-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <32>;
+	};
+
+	ddr1: memory-controller@8000 {
+		compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+		reg = <0x8000 0x1000>;
+		interrupts = <16 2 1 23>;
+	};
+
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,p3041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
+		reg = <0x10000 0x1000>;
+		interrupts = <16 2 1 27>;
+	};
+
+	corenet-cf@18000 {
+		compatible = "fsl,corenet-cf";
+		reg = <0x18000 0x1000>;
+		interrupts = <16 2 1 31>;
+		fsl,ccf-num-csdids = <32>;
+		fsl,ccf-num-snoopids = <32>;
+	};
+
+	iommu@20000 {
+		compatible = "fsl,pamu-v1.0", "fsl,pamu";
+		reg = <0x20000 0x4000>;
+		interrupts = <
+			24 2 0 0
+			16 2 1 30>;
+	};
+
+/include/ "qoriq-mpic.dtsi"
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,qoriq-device-config-1.0";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		#sleep-cells = <1>;
+		fsl,liodn-bits = <12>;
+	};
+
+	pins: global-utilities@e0e00 {
+		compatible = "fsl,qoriq-pin-control-1.0";
+		reg = <0xe0e00 0x200>;
+		#sleep-cells = <2>;
+	};
+
+	clockgen: global-utilities@e1000 {
+		compatible = "fsl,p3041-clockgen", "fsl,qoriq-clockgen-1.0";
+		reg = <0xe1000 0x1000>;
+		clock-frequency = <0>;
+	};
+
+	rcpm: global-utilities@e2000 {
+		compatible = "fsl,qoriq-rcpm-1.0";
+		reg = <0xe2000 0x1000>;
+		#sleep-cells = <1>;
+	};
+
+	sfp: sfp@e8000 {
+		compatible = "fsl,p3041-sfp", "fsl,qoriq-sfp-1.0";
+		reg	   = <0xe8000 0x1000>;
+	};
+
+	serdes: serdes@ea000 {
+		compatible = "fsl,p3041-serdes";
+		reg	   = <0xea000 0x1000>;
+	};
+
+/include/ "qoriq-dma-0.dtsi"
+/include/ "qoriq-dma-1.dtsi"
+/include/ "qoriq-espi-0.dtsi"
+	spi@110000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "qoriq-esdhc-0.dtsi"
+	sdhc@114000 {
+		sdhci,auto-cmd12;
+	};
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+		usb0: usb@210000 {
+			phy_type = "utmi";
+			port0;
+		};
+
+/include/ "qoriq-usb2-dr-0.dtsi"
+		usb1: usb@211000 {
+			dr_mode = "host";
+			phy_type = "utmi";
+		};
+
+/include/ "qoriq-sata2-0.dtsi"
+/include/ "qoriq-sata2-1.dtsi"
+/include/ "qoriq-sec4.2-0.dtsi"
+};
diff --git a/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
new file mode 100644
index 0000000..136def3
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
@@ -0,0 +1,112 @@
+/*
+ * P3041 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+	compatible = "fsl,P3041";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+		dcsr = &dcsr;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		pci3 = &pci3;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		dma0 = &dma0;
+		dma1 = &dma1;
+		sdhc = &sdhc;
+		msi0 = &msi0;
+		msi1 = &msi1;
+		msi2 = &msi2;
+
+		crypto = &crypto;
+		sec_jr0 = &sec_jr0;
+		sec_jr1 = &sec_jr1;
+		sec_jr2 = &sec_jr2;
+		sec_jr3 = &sec_jr3;
+		rtic_a = &rtic_a;
+		rtic_b = &rtic_b;
+		rtic_c = &rtic_c;
+		rtic_d = &rtic_d;
+		sec_mon = &sec_mon;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e500mc@0 {
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu1: PowerPC,e500mc@1 {
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2_1>;
+			L2_1: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu2: PowerPC,e500mc@2 {
+			device_type = "cpu";
+			reg = <2>;
+			next-level-cache = <&L2_2>;
+			L2_2: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu3: PowerPC,e500mc@3 {
+			device_type = "cpu";
+			reg = <3>;
+			next-level-cache = <&L2_3>;
+			L2_3: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p3060si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3060si-post.dtsi
new file mode 100644
index 0000000..a63edd1
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p3060si-post.dtsi
@@ -0,0 +1,296 @@
+/*
+ * P3060 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	compatible = "fsl,p3060-elbc", "fsl,elbc", "simple-bus";
+	interrupts = <25 2 0 0>;
+	#address-cells = <2>;
+	#size-cells = <1>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+	compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 15>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 15>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 40 1 0 0
+			0000 0 0 2 &mpic 1 1 0 0
+			0000 0 0 3 &mpic 2 1 0 0
+			0000 0 0 4 &mpic 3 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x201000 */
+&pci1 {
+	compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 14>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 14>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 41 1 0 0
+			0000 0 0 2 &mpic 5 1 0 0
+			0000 0 0 3 &mpic 6 1 0 0
+			0000 0 0 4 &mpic 7 1 0 0
+			>;
+	};
+};
+
+&rio {
+	compatible = "fsl,srio";
+	interrupts = <16 2 1 11>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+	fsl,srio-rmu-handle = <&rmu>;
+	ranges;
+
+	port1 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <1>;
+	};
+
+	port2 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <2>;
+	};
+};
+
+&dcsr {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,dcsr", "simple-bus";
+
+	dcsr-epu@0 {
+		compatible = "fsl,dcsr-epu";
+		interrupts = <52 2 0 0
+			      84 2 0 0
+			      85 2 0 0>;
+		reg = <0x0 0x1000>;
+	};
+	dcsr-npc {
+		compatible = "fsl,dcsr-npc";
+		reg = <0x1000 0x1000 0x1000000 0x8000>;
+	};
+	dcsr-nxc@2000 {
+		compatible = "fsl,dcsr-nxc";
+		reg = <0x2000 0x1000>;
+	};
+	dcsr-corenet {
+		compatible = "fsl,dcsr-corenet";
+		reg = <0x8000 0x1000 0xB0000 0x1000>;
+	};
+	dcsr-dpaa@9000 {
+		compatible = "fsl,p3060-dcsr-dpaa", "fsl,dcsr-dpaa";
+		reg = <0x9000 0x1000>;
+	};
+	dcsr-ocn@11000 {
+		compatible = "fsl,p3060-dcsr-ocn", "fsl,dcsr-ocn";
+		reg = <0x11000 0x1000>;
+	};
+	dcsr-ddr@12000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr1>;
+		reg = <0x12000 0x1000>;
+	};
+	dcsr-nal@18000 {
+		compatible = "fsl,p3060-dcsr-nal", "fsl,dcsr-nal";
+		reg = <0x18000 0x1000>;
+	};
+	dcsr-rcpm@22000 {
+		compatible = "fsl,p3060-dcsr-rcpm", "fsl,dcsr-rcpm";
+		reg = <0x22000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@40000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu0>;
+		reg = <0x40000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@41000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu1>;
+		reg = <0x41000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@44000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu4>;
+		reg = <0x44000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@45000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu5>;
+		reg = <0x45000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@46000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu6>;
+		reg = <0x46000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@47000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu7>;
+		reg = <0x47000 0x1000>;
+	};
+
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+
+	soc-sram-error {
+		compatible = "fsl,soc-sram-error";
+		interrupts = <16 2 1 29>;
+	};
+
+	corenet-law@0 {
+		compatible = "fsl,corenet-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <32>;
+	};
+
+	ddr1: memory-controller@8000 {
+		compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
+		reg = <0x8000 0x1000>;
+		interrupts = <16 2 1 23>;
+	};
+
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,p3060-l3-cache-controller", "cache";
+		reg = <0x10000 0x1000
+		       0x11000 0x1000>;
+		interrupts = <16 2 1 27
+			      16 2 1 26>;
+	};
+
+	corenet-cf@18000 {
+		compatible = "fsl,corenet-cf";
+		reg = <0x18000 0x1000>;
+		interrupts = <16 2 1 31>;
+		fsl,ccf-num-csdids = <32>;
+		fsl,ccf-num-snoopids = <32>;
+	};
+
+	iommu@20000 {
+		compatible = "fsl,pamu-v1.0", "fsl,pamu";
+		reg = <0x20000 0x5000>;
+		interrupts = <
+			24 2 0 0
+			16 2 1 30>;
+	};
+
+/include/ "qoriq-rmu-0.dtsi"
+/include/ "qoriq-mpic.dtsi"
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,qoriq-device-config-1.0";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		#sleep-cells = <1>;
+		fsl,liodn-bits = <12>;
+	};
+
+	pins: global-utilities@e0e00 {
+		compatible = "fsl,qoriq-pin-control-1.0";
+		reg = <0xe0e00 0x200>;
+		#sleep-cells = <2>;
+	};
+
+	clockgen: global-utilities@e1000 {
+		compatible = "fsl,p3060-clockgen", "fsl,qoriq-clockgen-1.0";
+		reg = <0xe1000 0x1000>;
+		clock-frequency = <0>;
+	};
+
+	rcpm: global-utilities@e2000 {
+		compatible = "fsl,qoriq-rcpm-1.0";
+		reg = <0xe2000 0x1000>;
+		#sleep-cells = <1>;
+	};
+
+	sfp: sfp@e8000 {
+		compatible = "fsl,p3060-sfp", "fsl,qoriq-sfp-1.0";
+		reg	   = <0xe8000 0x1000>;
+	};
+
+	serdes: serdes@ea000 {
+		compatible = "fsl,p3060-serdes";
+		reg	   = <0xea000 0x1000>;
+	};
+
+/include/ "qoriq-dma-0.dtsi"
+/include/ "qoriq-dma-1.dtsi"
+/include/ "qoriq-espi-0.dtsi"
+	spi@110000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+/include/ "qoriq-usb2-dr-0.dtsi"
+/include/ "qoriq-sec4.1-0.dtsi"
+};
diff --git a/arch/powerpc/boot/dts/fsl/p3060si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p3060si-pre.dtsi
new file mode 100644
index 0000000..00c8e70
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p3060si-pre.dtsi
@@ -0,0 +1,125 @@
+/*
+ * P3060 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+	compatible = "fsl,P3060";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+		dcsr = &dcsr;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		dma0 = &dma0;
+		dma1 = &dma1;
+		msi0 = &msi0;
+		msi1 = &msi1;
+		msi2 = &msi2;
+
+		crypto = &crypto;
+		sec_jr0 = &sec_jr0;
+		sec_jr1 = &sec_jr1;
+		sec_jr2 = &sec_jr2;
+		sec_jr3 = &sec_jr3;
+		rtic_a = &rtic_a;
+		rtic_b = &rtic_b;
+		rtic_c = &rtic_c;
+		rtic_d = &rtic_d;
+		sec_mon = &sec_mon;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e500mc@0 {
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu1: PowerPC,e500mc@1 {
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2_1>;
+			L2_1: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu4: PowerPC,e500mc@4 {
+			device_type = "cpu";
+			reg = <4>;
+			next-level-cache = <&L2_4>;
+			L2_4: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu5: PowerPC,e500mc@5 {
+			device_type = "cpu";
+			reg = <5>;
+			next-level-cache = <&L2_5>;
+			L2_5: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu6: PowerPC,e500mc@6 {
+			device_type = "cpu";
+			reg = <6>;
+			next-level-cache = <&L2_6>;
+			L2_6: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu7: PowerPC,e500mc@7 {
+			device_type = "cpu";
+			reg = <7>;
+			next-level-cache = <&L2_7>;
+			L2_7: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
new file mode 100644
index 0000000..8d35d2c
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
@@ -0,0 +1,350 @@
+/*
+ * P4080/P4040 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	compatible = "fsl,p4080-elbc", "fsl,elbc", "simple-bus";
+	interrupts = <25 2 0 0>;
+	#address-cells = <2>;
+	#size-cells = <1>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+	compatible = "fsl,p4080-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 15>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 15>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 40 1 0 0
+			0000 0 0 2 &mpic 1 1 0 0
+			0000 0 0 3 &mpic 2 1 0 0
+			0000 0 0 4 &mpic 3 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x201000 */
+&pci1 {
+	compatible = "fsl,p4080-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 14>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 14>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 41 1 0 0
+			0000 0 0 2 &mpic 5 1 0 0
+			0000 0 0 3 &mpic 6 1 0 0
+			0000 0 0 4 &mpic 7 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x202000 */
+&pci2 {
+	compatible = "fsl,p4080-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 13>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 13>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 42 1 0 0
+			0000 0 0 2 &mpic 9 1 0 0
+			0000 0 0 3 &mpic 10 1 0 0
+			0000 0 0 4 &mpic 11 1 0 0
+			>;
+	};
+};
+
+&rio {
+	compatible = "fsl,srio";
+	interrupts = <16 2 1 11>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+	fsl,srio-rmu-handle = <&rmu>;
+	ranges;
+
+	port1 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <1>;
+	};
+
+	port2 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <2>;
+	};
+};
+
+&dcsr {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,dcsr", "simple-bus";
+
+	dcsr-epu@0 {
+		compatible = "fsl,dcsr-epu";
+		interrupts = <52 2 0 0
+			      84 2 0 0
+			      85 2 0 0>;
+		reg = <0x0 0x1000>;
+	};
+	dcsr-npc {
+		compatible = "fsl,dcsr-npc";
+		reg = <0x1000 0x1000 0x1000000 0x8000>;
+	};
+	dcsr-nxc@2000 {
+		compatible = "fsl,dcsr-nxc";
+		reg = <0x2000 0x1000>;
+	};
+	dcsr-corenet {
+		compatible = "fsl,dcsr-corenet";
+		reg = <0x8000 0x1000 0xB0000 0x1000>;
+	};
+	dcsr-dpaa@9000 {
+		compatible = "fsl,p4080-dcsr-dpaa", "fsl,dcsr-dpaa";
+		reg = <0x9000 0x1000>;
+	};
+	dcsr-ocn@11000 {
+		compatible = "fsl,p4080-dcsr-ocn", "fsl,dcsr-ocn";
+		reg = <0x11000 0x1000>;
+	};
+	dcsr-ddr@12000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr1>;
+		reg = <0x12000 0x1000>;
+	};
+	dcsr-ddr@13000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr2>;
+		reg = <0x13000 0x1000>;
+	};
+	dcsr-nal@18000 {
+		compatible = "fsl,p4080-dcsr-nal", "fsl,dcsr-nal";
+		reg = <0x18000 0x1000>;
+	};
+	dcsr-rcpm@22000 {
+		compatible = "fsl,p4080-dcsr-rcpm", "fsl,dcsr-rcpm";
+		reg = <0x22000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@40000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu0>;
+		reg = <0x40000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@41000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu1>;
+		reg = <0x41000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@42000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu2>;
+		reg = <0x42000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@43000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu3>;
+		reg = <0x43000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@44000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu4>;
+		reg = <0x44000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@45000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu5>;
+		reg = <0x45000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@46000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu6>;
+		reg = <0x46000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@47000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu7>;
+		reg = <0x47000 0x1000>;
+	};
+
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+
+	soc-sram-error {
+		compatible = "fsl,soc-sram-error";
+		interrupts = <16 2 1 29>;
+	};
+
+	corenet-law@0 {
+		compatible = "fsl,corenet-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <32>;
+	};
+
+	ddr1: memory-controller@8000 {
+		compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
+		reg = <0x8000 0x1000>;
+		interrupts = <16 2 1 23>;
+	};
+
+	ddr2: memory-controller@9000 {
+		compatible = "fsl,qoriq-memory-controller-v4.4","fsl,qoriq-memory-controller";
+		reg = <0x9000 0x1000>;
+		interrupts = <16 2 1 22>;
+	};
+
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,p4080-l3-cache-controller", "cache";
+		reg = <0x10000 0x1000
+		       0x11000 0x1000>;
+		interrupts = <16 2 1 27
+			      16 2 1 26>;
+	};
+
+	corenet-cf@18000 {
+		compatible = "fsl,corenet-cf";
+		reg = <0x18000 0x1000>;
+		interrupts = <16 2 1 31>;
+		fsl,ccf-num-csdids = <32>;
+		fsl,ccf-num-snoopids = <32>;
+	};
+
+	iommu@20000 {
+		compatible = "fsl,pamu-v1.0", "fsl,pamu";
+		reg = <0x20000 0x5000>;
+		interrupts = <
+			24 2 0 0
+			16 2 1 30>;
+	};
+
+/include/ "qoriq-rmu-0.dtsi"
+/include/ "qoriq-mpic.dtsi"
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,qoriq-device-config-1.0";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		#sleep-cells = <1>;
+		fsl,liodn-bits = <12>;
+	};
+
+	pins: global-utilities@e0e00 {
+		compatible = "fsl,qoriq-pin-control-1.0";
+		reg = <0xe0e00 0x200>;
+		#sleep-cells = <2>;
+	};
+
+	clockgen: global-utilities@e1000 {
+		compatible = "fsl,p4080-clockgen", "fsl,qoriq-clockgen-1.0";
+		reg = <0xe1000 0x1000>;
+		clock-frequency = <0>;
+	};
+
+	rcpm: global-utilities@e2000 {
+		compatible = "fsl,qoriq-rcpm-1.0";
+		reg = <0xe2000 0x1000>;
+		#sleep-cells = <1>;
+	};
+
+	sfp: sfp@e8000 {
+		compatible = "fsl,p4080-sfp", "fsl,qoriq-sfp-1.0";
+		reg	   = <0xe8000 0x1000>;
+	};
+
+	serdes: serdes@ea000 {
+		compatible = "fsl,p4080-serdes";
+		reg	   = <0xea000 0x1000>;
+	};
+
+/include/ "qoriq-dma-0.dtsi"
+/include/ "qoriq-dma-1.dtsi"
+/include/ "qoriq-espi-0.dtsi"
+	spi@110000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "qoriq-esdhc-0.dtsi"
+	sdhc@114000 {
+		voltage-ranges = <3300 3300>;
+		sdhci,auto-cmd12;
+	};
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+/include/ "qoriq-usb2-dr-0.dtsi"
+/include/ "qoriq-sec4.0-0.dtsi"
+};
diff --git a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
new file mode 100644
index 0000000..b9556ee
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
@@ -0,0 +1,143 @@
+/*
+ * P4080/P4040 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+	compatible = "fsl,P4080";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+		dcsr = &dcsr;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		dma0 = &dma0;
+		dma1 = &dma1;
+		sdhc = &sdhc;
+		msi0 = &msi0;
+		msi1 = &msi1;
+		msi2 = &msi2;
+
+		crypto = &crypto;
+		sec_jr0 = &sec_jr0;
+		sec_jr1 = &sec_jr1;
+		sec_jr2 = &sec_jr2;
+		sec_jr3 = &sec_jr3;
+		rtic_a = &rtic_a;
+		rtic_b = &rtic_b;
+		rtic_c = &rtic_c;
+		rtic_d = &rtic_d;
+		sec_mon = &sec_mon;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e500mc@0 {
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu1: PowerPC,e500mc@1 {
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2_1>;
+			L2_1: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu2: PowerPC,e500mc@2 {
+			device_type = "cpu";
+			reg = <2>;
+			next-level-cache = <&L2_2>;
+			L2_2: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu3: PowerPC,e500mc@3 {
+			device_type = "cpu";
+			reg = <3>;
+			next-level-cache = <&L2_3>;
+			L2_3: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu4: PowerPC,e500mc@4 {
+			device_type = "cpu";
+			reg = <4>;
+			next-level-cache = <&L2_4>;
+			L2_4: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu5: PowerPC,e500mc@5 {
+			device_type = "cpu";
+			reg = <5>;
+			next-level-cache = <&L2_5>;
+			L2_5: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu6: PowerPC,e500mc@6 {
+			device_type = "cpu";
+			reg = <6>;
+			next-level-cache = <&L2_6>;
+			L2_6: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu7: PowerPC,e500mc@7 {
+			device_type = "cpu";
+			reg = <7>;
+			next-level-cache = <&L2_7>;
+			L2_7: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
new file mode 100644
index 0000000..914074b
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
@@ -0,0 +1,355 @@
+/*
+ * P5020/5010 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	compatible = "fsl,p5020-elbc", "fsl,elbc", "simple-bus";
+	interrupts = <25 2 0 0>;
+	#address-cells = <2>;
+	#size-cells = <1>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+	compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 15>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 15>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 40 1 0 0
+			0000 0 0 2 &mpic 1 1 0 0
+			0000 0 0 3 &mpic 2 1 0 0
+			0000 0 0 4 &mpic 3 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x201000 */
+&pci1 {
+	compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 14>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 14>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 41 1 0 0
+			0000 0 0 2 &mpic 5 1 0 0
+			0000 0 0 3 &mpic 6 1 0 0
+			0000 0 0 4 &mpic 7 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x202000 */
+&pci2 {
+	compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 13>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 13>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 42 1 0 0
+			0000 0 0 2 &mpic 9 1 0 0
+			0000 0 0 3 &mpic 10 1 0 0
+			0000 0 0 4 &mpic 11 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x203000 */
+&pci3 {
+	compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 12>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 12>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 43 1 0 0
+			0000 0 0 2 &mpic 0 1 0 0
+			0000 0 0 3 &mpic 4 1 0 0
+			0000 0 0 4 &mpic 8 1 0 0
+			>;
+	};
+};
+
+&rio {
+	compatible = "fsl,srio";
+	interrupts = <16 2 1 11>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+	ranges;
+
+	port1 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <1>;
+	};
+
+	port2 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <2>;
+	};
+};
+
+&dcsr {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,dcsr", "simple-bus";
+
+	dcsr-epu@0 {
+		compatible = "fsl,dcsr-epu";
+		interrupts = <52 2 0 0
+			      84 2 0 0
+			      85 2 0 0>;
+		reg = <0x0 0x1000>;
+	};
+	dcsr-npc {
+		compatible = "fsl,dcsr-npc";
+		reg = <0x1000 0x1000 0x1000000 0x8000>;
+	};
+	dcsr-nxc@2000 {
+		compatible = "fsl,dcsr-nxc";
+		reg = <0x2000 0x1000>;
+	};
+	dcsr-corenet {
+		compatible = "fsl,dcsr-corenet";
+		reg = <0x8000 0x1000 0xB0000 0x1000>;
+	};
+	dcsr-dpaa@9000 {
+		compatible = "fsl,p5020-dcsr-dpaa", "fsl,dcsr-dpaa";
+		reg = <0x9000 0x1000>;
+	};
+	dcsr-ocn@11000 {
+		compatible = "fsl,p5020-dcsr-ocn", "fsl,dcsr-ocn";
+		reg = <0x11000 0x1000>;
+	};
+	dcsr-ddr@12000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr1>;
+		reg = <0x12000 0x1000>;
+	};
+	dcsr-ddr@13000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr2>;
+		reg = <0x13000 0x1000>;
+	};
+	dcsr-nal@18000 {
+		compatible = "fsl,p5020-dcsr-nal", "fsl,dcsr-nal";
+		reg = <0x18000 0x1000>;
+	};
+	dcsr-rcpm@22000 {
+		compatible = "fsl,p5020-dcsr-rcpm", "fsl,dcsr-rcpm";
+		reg = <0x22000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@40000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu0>;
+		reg = <0x40000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@41000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu1>;
+		reg = <0x41000 0x1000>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+
+	soc-sram-error {
+		compatible = "fsl,soc-sram-error";
+		interrupts = <16 2 1 29>;
+	};
+
+	corenet-law@0 {
+		compatible = "fsl,corenet-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <32>;
+	};
+
+	ddr1: memory-controller@8000 {
+		compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+		reg = <0x8000 0x1000>;
+		interrupts = <16 2 1 23>;
+	};
+
+	ddr2: memory-controller@9000 {
+		compatible = "fsl,qoriq-memory-controller-v4.5","fsl,qoriq-memory-controller";
+		reg = <0x9000 0x1000>;
+		interrupts = <16 2 1 22>;
+	};
+
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,p5020-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
+		reg = <0x10000 0x1000
+		       0x11000 0x1000>;
+		interrupts = <16 2 1 27
+			      16 2 1 26>;
+	};
+
+	corenet-cf@18000 {
+		compatible = "fsl,corenet-cf";
+		reg = <0x18000 0x1000>;
+		interrupts = <16 2 1 31>;
+		fsl,ccf-num-csdids = <32>;
+		fsl,ccf-num-snoopids = <32>;
+	};
+
+	iommu@20000 {
+		compatible = "fsl,pamu-v1.0", "fsl,pamu";
+		reg = <0x20000 0x4000>;
+		interrupts = <
+			24 2 0 0
+			16 2 1 30>;
+	};
+
+/include/ "qoriq-mpic.dtsi"
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,qoriq-device-config-1.0";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		#sleep-cells = <1>;
+		fsl,liodn-bits = <12>;
+	};
+
+	pins: global-utilities@e0e00 {
+		compatible = "fsl,qoriq-pin-control-1.0";
+		reg = <0xe0e00 0x200>;
+		#sleep-cells = <2>;
+	};
+
+	clockgen: global-utilities@e1000 {
+		compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
+		reg = <0xe1000 0x1000>;
+		clock-frequency = <0>;
+	};
+
+	rcpm: global-utilities@e2000 {
+		compatible = "fsl,qoriq-rcpm-1.0";
+		reg = <0xe2000 0x1000>;
+		#sleep-cells = <1>;
+	};
+
+	sfp: sfp@e8000 {
+		compatible = "fsl,p5020-sfp", "fsl,qoriq-sfp-1.0";
+		reg	   = <0xe8000 0x1000>;
+	};
+
+	serdes: serdes@ea000 {
+		compatible = "fsl,p5020-serdes";
+		reg	   = <0xea000 0x1000>;
+	};
+
+/include/ "qoriq-dma-0.dtsi"
+/include/ "qoriq-dma-1.dtsi"
+/include/ "qoriq-espi-0.dtsi"
+	spi@110000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "qoriq-esdhc-0.dtsi"
+	sdhc@114000 {
+		sdhci,auto-cmd12;
+	};
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+		usb0: usb@210000 {
+			phy_type = "utmi";
+			port0;
+		};
+
+/include/ "qoriq-usb2-dr-0.dtsi"
+		usb1: usb@211000 {
+			dr_mode = "host";
+			phy_type = "utmi";
+		};
+
+/include/ "qoriq-sata2-0.dtsi"
+/include/ "qoriq-sata2-1.dtsi"
+/include/ "qoriq-sec4.2-0.dtsi"
+};
diff --git a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
new file mode 100644
index 0000000..ae823a4
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
@@ -0,0 +1,96 @@
+/*
+ * P5020/P5010 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+	compatible = "fsl,P5020";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+		dcsr = &dcsr;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		pci3 = &pci3;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		dma0 = &dma0;
+		dma1 = &dma1;
+		sdhc = &sdhc;
+		msi0 = &msi0;
+		msi1 = &msi1;
+		msi2 = &msi2;
+
+		crypto = &crypto;
+		sec_jr0 = &sec_jr0;
+		sec_jr1 = &sec_jr1;
+		sec_jr2 = &sec_jr2;
+		sec_jr3 = &sec_jr3;
+		rtic_a = &rtic_a;
+		rtic_b = &rtic_b;
+		rtic_c = &rtic_c;
+		rtic_d = &rtic_d;
+		sec_mon = &sec_mon;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e5500@0 {
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu1: PowerPC,e5500@1 {
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2_1>;
+			L2_1: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-dma-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-dma-0.dtsi
new file mode 100644
index 0000000..b5b37ad
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-dma-0.dtsi
@@ -0,0 +1,66 @@
+/*
+ * PQ3 DMA device tree stub [ controller @ offset 0x21000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+dma@21300 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,eloplus-dma";
+	reg = <0x21300 0x4>;
+	ranges = <0x0 0x21100 0x200>;
+	cell-index = <0>;
+	dma-channel@0 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x0 0x80>;
+		cell-index = <0>;
+		interrupts = <20 2 0 0>;
+	};
+	dma-channel@80 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x80 0x80>;
+		cell-index = <1>;
+		interrupts = <21 2 0 0>;
+	};
+	dma-channel@100 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x100 0x80>;
+		cell-index = <2>;
+		interrupts = <22 2 0 0>;
+	};
+	dma-channel@180 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x180 0x80>;
+		cell-index = <3>;
+		interrupts = <23 2 0 0>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-dma-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-dma-1.dtsi
new file mode 100644
index 0000000..28cb8a5
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-dma-1.dtsi
@@ -0,0 +1,66 @@
+/*
+ * PQ3 DMA device tree stub [ controller @ offset 0xc300 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+dma@c300 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,eloplus-dma";
+	reg = <0xc300 0x4>;
+	ranges = <0x0 0xc100 0x200>;
+	cell-index = <1>;
+	dma-channel@0 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x0 0x80>;
+		cell-index = <0>;
+		interrupts = <76 2 0 0>;
+	};
+	dma-channel@80 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x80 0x80>;
+		cell-index = <1>;
+		interrupts = <77 2 0 0>;
+	};
+	dma-channel@100 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x100 0x80>;
+		cell-index = <2>;
+		interrupts = <78 2 0 0>;
+	};
+	dma-channel@180 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x180 0x80>;
+		cell-index = <3>;
+		interrupts = <79 2 0 0>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-duart-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-duart-0.dtsi
new file mode 100644
index 0000000..5e268fd
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-duart-0.dtsi
@@ -0,0 +1,51 @@
+/*
+ * PQ3 DUART device tree stub [ controller @ offset 0x4000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+serial0: serial@4500 {
+	cell-index = <0>;
+	device_type = "serial";
+	compatible = "fsl,ns16550", "ns16550";
+	reg = <0x4500 0x100>;
+	clock-frequency = <0>;
+	interrupts = <42 2 0 0>;
+};
+
+serial1: serial@4600 {
+	cell-index = <1>;
+	device_type = "serial";
+	compatible = "fsl,ns16550", "ns16550";
+	reg = <0x4600 0x100>;
+	clock-frequency = <0>;
+	interrupts = <42 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-esdhc-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-esdhc-0.dtsi
new file mode 100644
index 0000000..5743433
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-esdhc-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * PQ3 eSDHC device tree stub [ controller @ offset 0x2e000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+sdhc@2e000 {
+	compatible = "fsl,esdhc";
+	reg = <0x2e000 0x1000>;
+	interrupts = <72 0x2 0 0>;
+	/* Filled in by U-Boot */
+	clock-frequency = <0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-espi-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-espi-0.dtsi
new file mode 100644
index 0000000..75854b2
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-espi-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * PQ3 eSPI device tree stub [ controller @ offset 0x7000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+spi@7000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,mpc8536-espi";
+	reg = <0x7000 0x1000>;
+	interrupts = <59 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi
new file mode 100644
index 0000000..a1979ae
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi
@@ -0,0 +1,53 @@
+/*
+ * PQ3 eTSEC device tree stub [ @ offsets 0x24000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+ethernet@24000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	cell-index = <0>;
+	device_type = "network";
+	model = "eTSEC";
+	compatible = "gianfar";
+	reg = <0x24000 0x1000>;
+	ranges = <0x0 0x24000 0x1000>;
+	local-mac-address = [ 00 00 00 00 00 00 ];
+	interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
+};
+
+mdio@24520 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,gianfar-mdio";
+	reg = <0x24520 0x20>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi
new file mode 100644
index 0000000..4c4fdde
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi
@@ -0,0 +1,53 @@
+/*
+ * PQ3 eTSEC device tree stub [ @ offsets 0x25000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+ethernet@25000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	cell-index = <1>;
+	device_type = "network";
+	model = "eTSEC";
+	compatible = "gianfar";
+	reg = <0x25000 0x1000>;
+	ranges = <0x0 0x25000 0x1000>;
+	local-mac-address = [ 00 00 00 00 00 00 ];
+	interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
+};
+
+mdio@25520 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,gianfar-tbi";
+	reg = <0x25520 0x20>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi
new file mode 100644
index 0000000..4b8ab43
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi
@@ -0,0 +1,53 @@
+/*
+ * PQ3 eTSEC device tree stub [ @ offsets 0x26000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+ethernet@26000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	cell-index = <2>;
+	device_type = "network";
+	model = "eTSEC";
+	compatible = "gianfar";
+	reg = <0x26000 0x1000>;
+	ranges = <0x0 0x26000 0x1000>;
+	local-mac-address = [ 00 00 00 00 00 00 ];
+	interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
+};
+
+mdio@26520 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,gianfar-tbi";
+	reg = <0x26520 0x20>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi
new file mode 100644
index 0000000..40c9137
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi
@@ -0,0 +1,53 @@
+/*
+ * PQ3 eTSEC device tree stub [ @ offsets 0x27000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+ethernet@27000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	cell-index = <3>;
+	device_type = "network";
+	model = "eTSEC";
+	compatible = "gianfar";
+	reg = <0x27000 0x1000>;
+	ranges = <0x0 0x27000 0x1000>;
+	local-mac-address = [ 00 00 00 00 00 00 ];
+	interrupts = <37 2 0 0 38 2 0 0 39 2 0 0>;
+};
+
+mdio@27520 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,gianfar-tbi";
+	reg = <0x27520 0x20>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-timer-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-timer-0.dtsi
new file mode 100644
index 0000000..efe2ca0
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-timer-0.dtsi
@@ -0,0 +1,39 @@
+/*
+ * PQ3 eTSEC Timer (IEEE 1588) device tree stub [ @ offsets 0x24e00 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+ptp_clock@24e00 {
+	compatible = "fsl,etsec-ptp";
+	reg = <0x24e00 0xb0>;
+	interrupts = <68 2 0 0 69 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi
new file mode 100644
index 0000000..1382fec
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi
@@ -0,0 +1,60 @@
+/*
+ * PQ3 eTSEC2 device tree stub [ @ offsets 0x24000/0xb0000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+
+mdio@24000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,etsec2-mdio";
+	reg = <0x24000 0x1000 0xb0030 0x4>;
+};
+
+ethernet@b0000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "network";
+	model = "eTSEC";
+	compatible = "fsl,etsec2";
+	fsl,num_rx_queues = <0x8>;
+	fsl,num_tx_queues = <0x8>;
+	fsl,magic-packet;
+	local-mac-address = [ 00 00 00 00 00 00 ];
+
+	queue-group@b0000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0xb0000 0x1000>;
+		interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi
new file mode 100644
index 0000000..221cd2e
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi
@@ -0,0 +1,60 @@
+/*
+ * PQ3 eTSEC2 device tree stub [ @ offsets 0x25000/0xb1000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+
+mdio@25000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,etsec2-tbi";
+	reg = <0x25000 0x1000 0xb1030 0x4>;
+};
+
+ethernet@b1000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "network";
+	model = "eTSEC";
+	compatible = "fsl,etsec2";
+	fsl,num_rx_queues = <0x8>;
+	fsl,num_tx_queues = <0x8>;
+	fsl,magic-packet;
+	local-mac-address = [ 00 00 00 00 00 00 ];
+
+	queue-group@b1000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0xb1000 0x1000>;
+		interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi
new file mode 100644
index 0000000..61456c3
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi
@@ -0,0 +1,59 @@
+/*
+ * PQ3 eTSEC2 device tree stub [ @ offsets 0x26000/0xb2000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+mdio@26000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,etsec2-tbi";
+	reg = <0x26000 0x1000 0xb1030 0x4>;
+};
+
+ethernet@b2000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "network";
+	model = "eTSEC";
+	compatible = "fsl,etsec2";
+	fsl,num_rx_queues = <0x8>;
+	fsl,num_tx_queues = <0x8>;
+	fsl,magic-packet;
+	local-mac-address = [ 00 00 00 00 00 00 ];
+
+	queue-group@b2000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0xb2000 0x1000>;
+		interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-0.dtsi
new file mode 100644
index 0000000..034ab8f
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-0.dtsi
@@ -0,0 +1,42 @@
+/*
+ * PQ3 eTSEC2 Group 2 device tree stub [ @ offsets 0xb4000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&enet0_grp2 {
+	queue-group@b4000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0xb4000 0x1000>;
+		interrupts = <17 2 0 0 18 2 0 0 24 2 0 0>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-1.dtsi
new file mode 100644
index 0000000..3be9ba3
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-1.dtsi
@@ -0,0 +1,42 @@
+/*
+ * PQ3 eTSEC2 Group 2 device tree stub [ @ offsets 0xb5000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&enet1_grp2 {
+	queue-group@b5000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0xb5000 0x1000>;
+		interrupts = <51 2 0 0 52 2 0 0 67 2 0 0>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-2.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-2.dtsi
new file mode 100644
index 0000000..02a3345
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-2.dtsi
@@ -0,0 +1,42 @@
+/*
+ * PQ3 eTSEC2 Group 2 device tree stub [ @ offsets 0xb6000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&enet2_grp2 {
+	queue-group@b6000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0xb6000 0x1000>;
+		interrupts = <25 2 0 0 26 2 0 0 27 2 0 0>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi
new file mode 100644
index 0000000..72a3ef5
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * PQ3 GPIO device tree stub [ controller @ offset 0xf000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+gpio-controller@f000 {
+	#gpio-cells = <2>;
+	compatible = "fsl,pq3-gpio";
+	reg = <0xf000 0x100>;
+	interrupts = <47 0x2 0 0>;
+	gpio-controller;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-i2c-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-i2c-0.dtsi
new file mode 100644
index 0000000..d1dd6fb
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-i2c-0.dtsi
@@ -0,0 +1,43 @@
+/*
+ * PQ3 I2C device tree stub [ controller @ offset 0x3000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+i2c@3000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cell-index = <0>;
+	compatible = "fsl-i2c";
+	reg = <0x3000 0x100>;
+	interrupts = <43 2 0 0>;
+	dfsrr;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-i2c-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-i2c-1.dtsi
new file mode 100644
index 0000000..a9bd803
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-i2c-1.dtsi
@@ -0,0 +1,43 @@
+/*
+ * PQ3 I2C device tree stub [ controller @ offset 0x3100 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+i2c@3100 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cell-index = <1>;
+	compatible = "fsl-i2c";
+	reg = <0x3100 0x100>;
+	interrupts = <43 2 0 0>;
+	dfsrr;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi b/arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi
new file mode 100644
index 0000000..8734cff
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi
@@ -0,0 +1,42 @@
+/*
+ * PQ3 MPIC Timer (Group B) device tree stub [ controller @ offset 0x42100 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+timer@42100 {
+	compatible = "fsl,mpic-global-timer";
+	reg = <0x42100 0x100 0x42300 4>;
+	interrupts = <4 0 3 0
+		      5 0 3 0
+		      6 0 3 0
+		      7 0 3 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi b/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi
new file mode 100644
index 0000000..5c80460
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi
@@ -0,0 +1,66 @@
+/*
+ * PQ3 MPIC device tree stub [ controller @ offset 0x40000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+mpic: pic@40000 {
+	interrupt-controller;
+	#address-cells = <0>;
+	#interrupt-cells = <4>;
+	reg = <0x40000 0x40000>;
+	compatible = "fsl,mpic";
+	device_type = "open-pic";
+};
+
+timer@41100 {
+	compatible = "fsl,mpic-global-timer";
+	reg = <0x41100 0x100 0x41300 4>;
+	interrupts = <0 0 3 0
+		      1 0 3 0
+		      2 0 3 0
+		      3 0 3 0>;
+};
+
+msi@41600 {
+	compatible = "fsl,mpic-msi";
+	reg = <0x41600 0x80>;
+	msi-available-ranges = <0 0x100>;
+	interrupts = <
+		0xe0 0 0 0
+		0xe1 0 0 0
+		0xe2 0 0 0
+		0xe3 0 0 0
+		0xe4 0 0 0
+		0xe5 0 0 0
+		0xe6 0 0 0
+		0xe7 0 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-rmu-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-rmu-0.dtsi
new file mode 100644
index 0000000..587ca9f
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-rmu-0.dtsi
@@ -0,0 +1,68 @@
+/*
+ * PQ3 RIO Message Unit device tree stub [ controller @ offset 0xd3000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+rmu: rmu@d3000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,srio-rmu";
+	reg = <0xd3000 0x500>;
+	ranges = <0x0 0xd3000 0x500>;
+
+	message-unit@0 {
+		compatible = "fsl,srio-msg-unit";
+		reg = <0x0 0x100>;
+		interrupts = <
+			53 2 0 0 /* msg1_tx_irq */
+			54 2 0 0>;/* msg1_rx_irq */
+	};
+	message-unit@100 {
+		compatible = "fsl,srio-msg-unit";
+		reg = <0x100 0x100>;
+		interrupts = <
+			55 2 0 0  /* msg2_tx_irq */
+			56 2 0 0>;/* msg2_rx_irq */
+	};
+	doorbell-unit@400 {
+		compatible = "fsl,srio-dbell-unit";
+		reg = <0x400 0x80>;
+		interrupts = <
+			49 2 0 0  /* bell_outb_irq */
+			50 2 0 0>;/* bell_inb_irq */
+	};
+	port-write-unit@4e0 {
+		compatible = "fsl,srio-port-write-unit";
+		reg = <0x4e0 0x20>;
+		interrupts = <48 2 0 0>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sata2-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sata2-0.dtsi
new file mode 100644
index 0000000..3c28dd0
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-sata2-0.dtsi
@@ -0,0 +1,40 @@
+/*
+ * PQ3 SATAv2 device tree stub [ controller @ offset 0x18000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+sata@18000 {
+	compatible = "fsl,pq-sata-v2";
+	reg = <0x18000 0x1000>;
+	cell-index = <1>;
+	interrupts = <74 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sata2-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sata2-1.dtsi
new file mode 100644
index 0000000..eefaf28
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-sata2-1.dtsi
@@ -0,0 +1,40 @@
+/*
+ * PQ3 SATAv2 device tree stub [ controller @ offset 0x19000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+sata@19000 {
+	compatible = "fsl,pq-sata-v2";
+	reg = <0x19000 0x1000>;
+	cell-index = <2>;
+	interrupts = <41 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec2.1-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec2.1-0.dtsi
new file mode 100644
index 0000000..02a5c7a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-sec2.1-0.dtsi
@@ -0,0 +1,43 @@
+/*
+ * PQ3 Sec/Crypto 2.1 device tree stub [ controller @ offset 0x30000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto@30000 {
+	compatible = "fsl,sec2.1", "fsl,sec2.0";
+	reg = <0x30000 0x10000>;
+	interrupts = <45 2 0 0>;
+	fsl,num-channels = <4>;
+	fsl,channel-fifo-len = <24>;
+	fsl,exec-units-mask = <0xfe>;
+	fsl,descriptor-types-mask = <0x12b0ebf>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec3.0-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec3.0-0.dtsi
new file mode 100644
index 0000000..bba1ba4
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-sec3.0-0.dtsi
@@ -0,0 +1,45 @@
+/*
+ * PQ3 Sec/Crypto 3.0 device tree stub [ controller @ offset 0x30000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto@30000 {
+	compatible = "fsl,sec3.0",
+		     "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
+		     "fsl,sec2.0";
+	reg = <0x30000 0x10000>;
+	interrupts = <45 2 0 0 58 2 0 0>;
+	fsl,num-channels = <4>;
+	fsl,channel-fifo-len = <24>;
+	fsl,exec-units-mask = <0x9fe>;
+	fsl,descriptor-types-mask = <0x3ab0ebf>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec3.1-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec3.1-0.dtsi
new file mode 100644
index 0000000..8f0a566
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-sec3.1-0.dtsi
@@ -0,0 +1,45 @@
+/*
+ * PQ3 Sec/Crypto 3.1 device tree stub [ controller @ offset 0x30000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto@30000 {
+	compatible = "fsl,sec3.1", "fsl,sec3.0",
+		     "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
+		     "fsl,sec2.0";
+	reg = <0x30000 0x10000>;
+	interrupts = <45 2 0 0 58 2 0 0>;
+	fsl,num-channels = <4>;
+	fsl,channel-fifo-len = <24>;
+	fsl,exec-units-mask = <0xbfe>;
+	fsl,descriptor-types-mask = <0x3ab0ebf>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec3.3-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec3.3-0.dtsi
new file mode 100644
index 0000000..c227f27
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-sec3.3-0.dtsi
@@ -0,0 +1,45 @@
+/*
+ * PQ3 Sec/Crypto 3.3 device tree stub [ controller @ offset 0x30000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto@30000 {
+	compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
+		     "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
+		     "fsl,sec2.0";
+	reg = <0x30000 0x10000>;
+	interrupts = <45 2 0 0 58 2 0 0>;
+	fsl,num-channels = <4>;
+	fsl,channel-fifo-len = <24>;
+	fsl,exec-units-mask = <0x97c>;
+	fsl,descriptor-types-mask = <0x3a30abf>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi
new file mode 100644
index 0000000..bf957a7
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi
@@ -0,0 +1,65 @@
+/*
+ * PQ3 Sec/Crypto 4.4 device tree stub [ controller @ offset 0x30000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto@30000 {
+	compatible = "fsl,sec4.4", "fsl,sec4.0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	reg		 = <0x30000 0x10000>;
+	interrupts	 = <58 2 0 0>;
+
+	sec_jr0: jr@1000 {
+		compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring";
+		reg	   = <0x1000 0x1000>;
+		interrupts	 = <45 2 0 0>;
+	};
+
+	sec_jr1: jr@2000 {
+		compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring";
+		reg	   = <0x2000 0x1000>;
+		interrupts	 = <45 2 0 0>;
+	};
+
+	sec_jr2: jr@3000 {
+		compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring";
+		reg	   = <0x3000 0x1000>;
+		interrupts	 = <45 2 0 0>;
+	};
+
+	sec_jr3: jr@4000 {
+		compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring";
+		reg	   = <0x4000 0x1000>;
+		interrupts	 = <45 2 0 0>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-0.dtsi
new file mode 100644
index 0000000..185ab9d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * PQ3 USB DR device tree stub [ controller @ offset 0x22000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+usb@22000 {
+	compatible = "fsl-usb2-dr";
+	reg = <0x22000 0x1000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	interrupts = <28 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-1.dtsi
new file mode 100644
index 0000000..fe24cd6
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-1.dtsi
@@ -0,0 +1,41 @@
+/*
+ * PQ3 USB DR device tree stub [ controller @ offset 0x23000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+usb@23000 {
+	compatible = "fsl-usb2-dr";
+	reg = <0x23000 0x1000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	interrupts = <46 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-dma-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-dma-0.dtsi
new file mode 100644
index 0000000..1aebf3e
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-dma-0.dtsi
@@ -0,0 +1,66 @@
+/*
+ * QorIQ DMA device tree stub [ controller @ offset 0x100000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+dma0: dma@100300 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,eloplus-dma";
+	reg = <0x100300 0x4>;
+	ranges = <0x0 0x100100 0x200>;
+	cell-index = <0>;
+	dma-channel@0 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x0 0x80>;
+		cell-index = <0>;
+		interrupts = <28 2 0 0>;
+	};
+	dma-channel@80 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x80 0x80>;
+		cell-index = <1>;
+		interrupts = <29 2 0 0>;
+	};
+	dma-channel@100 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x100 0x80>;
+		cell-index = <2>;
+		interrupts = <30 2 0 0>;
+	};
+	dma-channel@180 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x180 0x80>;
+		cell-index = <3>;
+		interrupts = <31 2 0 0>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-dma-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-dma-1.dtsi
new file mode 100644
index 0000000..ecf5e18
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-dma-1.dtsi
@@ -0,0 +1,66 @@
+/*
+ * QorIQ DMA device tree stub [ controller @ offset 0x101000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+dma1: dma@101300 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,eloplus-dma";
+	reg = <0x101300 0x4>;
+	ranges = <0x0 0x101100 0x200>;
+	cell-index = <1>;
+	dma-channel@0 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x0 0x80>;
+		cell-index = <0>;
+		interrupts = <32 2 0 0>;
+	};
+	dma-channel@80 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x80 0x80>;
+		cell-index = <1>;
+		interrupts = <33 2 0 0>;
+	};
+	dma-channel@100 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x100 0x80>;
+		cell-index = <2>;
+		interrupts = <34 2 0 0>;
+	};
+	dma-channel@180 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x180 0x80>;
+		cell-index = <3>;
+		interrupts = <35 2 0 0>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-duart-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-duart-0.dtsi
new file mode 100644
index 0000000..225c07b
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-duart-0.dtsi
@@ -0,0 +1,51 @@
+/*
+ * QorIQ DUART device tree stub [ controller @ offset 0x11c000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+serial0: serial@11c500 {
+	cell-index = <0>;
+	device_type = "serial";
+	compatible = "fsl,ns16550", "ns16550";
+	reg = <0x11c500 0x100>;
+	clock-frequency = <0>;
+	interrupts = <36 2 0 0>;
+};
+
+serial1: serial@11c600 {
+	cell-index = <1>;
+	device_type = "serial";
+	compatible = "fsl,ns16550", "ns16550";
+	reg = <0x11c600 0x100>;
+	clock-frequency = <0>;
+	interrupts = <36 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-duart-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-duart-1.dtsi
new file mode 100644
index 0000000..d23233a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-duart-1.dtsi
@@ -0,0 +1,51 @@
+/*
+ * QorIQ DUART device tree stub [ controller @ offset 0x11d000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+serial2: serial@11d500 {
+	cell-index = <2>;
+	device_type = "serial";
+	compatible = "fsl,ns16550", "ns16550";
+	reg = <0x11d500 0x100>;
+	clock-frequency = <0>;
+	interrupts = <37 2 0 0>;
+};
+
+serial3: serial@11d600 {
+	cell-index = <3>;
+	device_type = "serial";
+	compatible = "fsl,ns16550", "ns16550";
+	reg = <0x11d600 0x100>;
+	clock-frequency = <0>;
+	interrupts = <37 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-esdhc-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-esdhc-0.dtsi
new file mode 100644
index 0000000..20835ae
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-esdhc-0.dtsi
@@ -0,0 +1,40 @@
+/*
+ * QorIQ eSDHC device tree stub [ controller @ offset 0x114000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+sdhc: sdhc@114000 {
+	compatible = "fsl,esdhc";
+	reg = <0x114000 0x1000>;
+	interrupts = <48 2 0 0>;
+	clock-frequency = <0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-espi-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-espi-0.dtsi
new file mode 100644
index 0000000..6db0697
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-espi-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ eSPI device tree stub [ controller @ offset 0x110000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+spi@110000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,mpc8536-espi";
+	reg = <0x110000 0x1000>;
+	interrupts = <53 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-gpio-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-gpio-0.dtsi
new file mode 100644
index 0000000..cf714f5
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-gpio-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ GPIO device tree stub [ controller @ offset 0x130000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+gpio0: gpio@130000 {
+	compatible = "fsl,qoriq-gpio";
+	reg = <0x130000 0x1000>;
+	interrupts = <55 2 0 0>;
+	#gpio-cells = <2>;
+	gpio-controller;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-i2c-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-i2c-0.dtsi
new file mode 100644
index 0000000..5f9bf7d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-i2c-0.dtsi
@@ -0,0 +1,53 @@
+/*
+ * QorIQ I2C device tree stub [ controller @ offset 0x118000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+i2c@118000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cell-index = <0>;
+	compatible = "fsl-i2c";
+	reg = <0x118000 0x100>;
+	interrupts = <38 2 0 0>;
+	dfsrr;
+};
+
+i2c@118100 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cell-index = <1>;
+	compatible = "fsl-i2c";
+	reg = <0x118100 0x100>;
+	interrupts = <38 2 0 0>;
+	dfsrr;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-i2c-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-i2c-1.dtsi
new file mode 100644
index 0000000..7989bf5
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-i2c-1.dtsi
@@ -0,0 +1,53 @@
+/*
+ * QorIQ I2C device tree stub [ controller @ offset 0x119000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+i2c@119000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cell-index = <2>;
+	compatible = "fsl-i2c";
+	reg = <0x119000 0x100>;
+	interrupts = <39 2 0 0>;
+	dfsrr;
+};
+
+i2c@119100 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cell-index = <3>;
+	compatible = "fsl-i2c";
+	reg = <0x119100 0x100>;
+	interrupts = <39 2 0 0>;
+	dfsrr;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi
new file mode 100644
index 0000000..b9bada6
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi
@@ -0,0 +1,106 @@
+/*
+ * QorIQ MPIC device tree stub [ controller @ offset 0x40000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+mpic: pic@40000 {
+	interrupt-controller;
+	#address-cells = <0>;
+	#interrupt-cells = <4>;
+	reg = <0x40000 0x40000>;
+	compatible = "fsl,mpic", "chrp,open-pic";
+	device_type = "open-pic";
+	clock-frequency = <0x0>;
+};
+
+timer@41100 {
+	compatible = "fsl,mpic-global-timer";
+	reg = <0x41100 0x100 0x41300 4>;
+	interrupts = <0 0 3 0
+		      1 0 3 0
+		      2 0 3 0
+		      3 0 3 0>;
+};
+
+msi0: msi@41600 {
+	compatible = "fsl,mpic-msi";
+	reg = <0x41600 0x200>;
+	msi-available-ranges = <0 0x100>;
+	interrupts = <
+		0xe0 0 0 0
+		0xe1 0 0 0
+		0xe2 0 0 0
+		0xe3 0 0 0
+		0xe4 0 0 0
+		0xe5 0 0 0
+		0xe6 0 0 0
+		0xe7 0 0 0>;
+};
+
+msi1: msi@41800 {
+	compatible = "fsl,mpic-msi";
+	reg = <0x41800 0x200>;
+	msi-available-ranges = <0 0x100>;
+	interrupts = <
+		0xe8 0 0 0
+		0xe9 0 0 0
+		0xea 0 0 0
+		0xeb 0 0 0
+		0xec 0 0 0
+		0xed 0 0 0
+		0xee 0 0 0
+		0xef 0 0 0>;
+};
+
+msi2: msi@41a00 {
+	compatible = "fsl,mpic-msi";
+	reg = <0x41a00 0x200>;
+	msi-available-ranges = <0 0x100>;
+	interrupts = <
+		0xf0 0 0 0
+		0xf1 0 0 0
+		0xf2 0 0 0
+		0xf3 0 0 0
+		0xf4 0 0 0
+		0xf5 0 0 0
+		0xf6 0 0 0
+		0xf7 0 0 0>;
+};
+
+timer@42100 {
+	compatible = "fsl,mpic-global-timer";
+	reg = <0x42100 0x100 0x42300 4>;
+	interrupts = <4 0 3 0
+		      5 0 3 0
+		      6 0 3 0
+		      7 0 3 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-rmu-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-rmu-0.dtsi
new file mode 100644
index 0000000..ca7fec79
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-rmu-0.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ RIO Message Unit device tree stub [ controller @ offset 0xd3000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+rmu: rmu@d3000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,srio-rmu";
+	reg = <0xd3000 0x500>;
+	ranges = <0x0 0xd3000 0x500>;
+
+	message-unit@0 {
+		compatible = "fsl,srio-msg-unit";
+		reg = <0x0 0x100>;
+		interrupts = <
+			60 2 0 0  /* msg1_tx_irq */
+			61 2 0 0>;/* msg1_rx_irq */
+	};
+	message-unit@100 {
+		compatible = "fsl,srio-msg-unit";
+		reg = <0x100 0x100>;
+		interrupts = <
+			62 2 0 0  /* msg2_tx_irq */
+			63 2 0 0>;/* msg2_rx_irq */
+	};
+	doorbell-unit@400 {
+		compatible = "fsl,srio-dbell-unit";
+		reg = <0x400 0x80>;
+		interrupts = <
+			56 2 0 0  /* bell_outb_irq */
+			57 2 0 0>;/* bell_inb_irq */
+	};
+	port-write-unit@4e0 {
+		compatible = "fsl,srio-port-write-unit";
+		reg = <0x4e0 0x20>;
+		interrupts = <16 2 1 11>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sata2-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sata2-0.dtsi
new file mode 100644
index 0000000..b642047
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-sata2-0.dtsi
@@ -0,0 +1,39 @@
+/*
+ * QorIQ SATAv2 device tree stub [ controller @ offset 0x220000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+sata@220000 {
+	compatible = "fsl,pq-sata-v2";
+	reg = <0x220000 0x1000>;
+	interrupts = <68 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sata2-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sata2-1.dtsi
new file mode 100644
index 0000000..c573702
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-sata2-1.dtsi
@@ -0,0 +1,39 @@
+/*
+ * QorIQ SATAv2 device tree stub [ controller @ offset 0x221000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+sata@221000 {
+	compatible = "fsl,pq-sata-v2";
+	reg = <0x221000 0x1000>;
+	interrupts = <69 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec4.0-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec4.0-0.dtsi
new file mode 100644
index 0000000..0cbbac3
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-sec4.0-0.dtsi
@@ -0,0 +1,100 @@
+/*
+ * QorIQ Sec/Crypto 4.0 device tree stub [ controller @ offset 0x300000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto: crypto@300000 {
+	compatible = "fsl,sec-v4.0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	reg = <0x300000 0x10000>;
+	ranges = <0 0x300000 0x10000>;
+	interrupts = <92 2 0 0>;
+
+	sec_jr0: jr@1000 {
+		compatible = "fsl,sec-v4.0-job-ring";
+		reg = <0x1000 0x1000>;
+		interrupts = <88 2 0 0>;
+	};
+
+	sec_jr1: jr@2000 {
+		compatible = "fsl,sec-v4.0-job-ring";
+		reg = <0x2000 0x1000>;
+		interrupts = <89 2 0 0>;
+	};
+
+	sec_jr2: jr@3000 {
+		compatible = "fsl,sec-v4.0-job-ring";
+		reg = <0x3000 0x1000>;
+		interrupts = <90 2 0 0>;
+	};
+
+	sec_jr3: jr@4000 {
+		compatible = "fsl,sec-v4.0-job-ring";
+		reg = <0x4000 0x1000>;
+		interrupts = <91 2 0 0>;
+	};
+
+	rtic@6000 {
+		compatible = "fsl,sec-v4.0-rtic";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x6000 0x100>;
+		ranges = <0x0 0x6100 0xe00>;
+
+		rtic_a: rtic-a@0 {
+			compatible = "fsl,sec-v4.0-rtic-memory";
+			reg = <0x00 0x20 0x100 0x80>;
+		};
+
+		rtic_b: rtic-b@20 {
+			compatible = "fsl,sec-v4.0-rtic-memory";
+			reg = <0x20 0x20 0x200 0x80>;
+		};
+
+		rtic_c: rtic-c@40 {
+			compatible = "fsl,sec-v4.0-rtic-memory";
+			reg = <0x40 0x20 0x300 0x80>;
+		};
+
+		rtic_d: rtic-d@60 {
+			compatible = "fsl,sec-v4.0-rtic-memory";
+			reg = <0x60 0x20 0x500 0x80>;
+		};
+	};
+};
+
+sec_mon: sec_mon@314000 {
+	compatible = "fsl,sec-v4.0-mon";
+	reg = <0x314000 0x1000>;
+	interrupts = <93 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec4.1-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec4.1-0.dtsi
new file mode 100644
index 0000000..3308986
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-sec4.1-0.dtsi
@@ -0,0 +1,109 @@
+/*
+ * QorIQ Sec/Crypto 4.1 device tree stub [ controller @ offset 0x300000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto: crypto@300000 {
+	compatible = "fsl,sec-v4.1", "fsl,sec-v4.0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	reg		 = <0x300000 0x10000>;
+	ranges		 = <0 0x300000 0x10000>;
+	interrupts	 = <92 2 0 0>;
+
+	sec_jr0: jr@1000 {
+		compatible = "fsl,sec-v4.1-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x1000 0x1000>;
+		interrupts = <88 2 0 0>;
+	};
+
+	sec_jr1: jr@2000 {
+		compatible = "fsl,sec-v4.1-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x2000 0x1000>;
+		interrupts = <89 2 0 0>;
+	};
+
+	sec_jr2: jr@3000 {
+		compatible = "fsl,sec-v4.1-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x3000 0x1000>;
+		interrupts = <90 2 0 0>;
+	};
+
+	sec_jr3: jr@4000 {
+		compatible = "fsl,sec-v4.1-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x4000 0x1000>;
+		interrupts = <91 2 0 0>;
+	};
+
+	rtic@6000 {
+		compatible = "fsl,sec-v4.1-rtic",
+			     "fsl,sec-v4.0-rtic";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x6000 0x100>;
+		ranges = <0x0 0x6100 0xe00>;
+
+		rtic_a: rtic-a@0 {
+			compatible = "fsl,sec-v4.1-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x00 0x20 0x100 0x80>;
+		};
+
+		rtic_b: rtic-b@20 {
+			compatible = "fsl,sec-v4.1-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x20 0x20 0x200 0x80>;
+		};
+
+		rtic_c: rtic-c@40 {
+			compatible = "fsl,sec-v4.1-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x40 0x20 0x300 0x80>;
+		};
+
+		rtic_d: rtic-d@60 {
+			compatible = "fsl,sec-v4.1-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x60 0x20 0x500 0x80>;
+		};
+	};
+};
+
+sec_mon: sec_mon@314000 {
+	compatible = "fsl,sec-v4.1-mon", "fsl,sec-v4.0-mon";
+	reg = <0x314000 0x1000>;
+	interrupts = <93 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec4.2-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec4.2-0.dtsi
new file mode 100644
index 0000000..7990e0d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-sec4.2-0.dtsi
@@ -0,0 +1,109 @@
+/*
+ * QorIQ Sec/Crypto 4.2 device tree stub [ controller @ offset 0x300000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto: crypto@300000 {
+	compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	reg		 = <0x300000 0x10000>;
+	ranges		 = <0 0x300000 0x10000>;
+	interrupts	 = <92 2 0 0>;
+
+	sec_jr0: jr@1000 {
+		compatible = "fsl,sec-v4.2-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x1000 0x1000>;
+		interrupts = <88 2 0 0>;
+	};
+
+	sec_jr1: jr@2000 {
+		compatible = "fsl,sec-v4.2-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x2000 0x1000>;
+		interrupts = <89 2 0 0>;
+	};
+
+	sec_jr2: jr@3000 {
+		compatible = "fsl,sec-v4.2-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x3000 0x1000>;
+		interrupts = <90 2 0 0>;
+	};
+
+	sec_jr3: jr@4000 {
+		compatible = "fsl,sec-v4.2-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x4000 0x1000>;
+		interrupts = <91 2 0 0>;
+	};
+
+	rtic@6000 {
+		compatible = "fsl,sec-v4.2-rtic",
+			     "fsl,sec-v4.0-rtic";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x6000 0x100>;
+		ranges = <0x0 0x6100 0xe00>;
+
+		rtic_a: rtic-a@0 {
+			compatible = "fsl,sec-v4.2-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x00 0x20 0x100 0x80>;
+		};
+
+		rtic_b: rtic-b@20 {
+			compatible = "fsl,sec-v4.2-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x20 0x20 0x200 0x80>;
+		};
+
+		rtic_c: rtic-c@40 {
+			compatible = "fsl,sec-v4.2-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x40 0x20 0x300 0x80>;
+		};
+
+		rtic_d: rtic-d@60 {
+			compatible = "fsl,sec-v4.2-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x60 0x20 0x500 0x80>;
+		};
+	};
+};
+
+sec_mon: sec_mon@314000 {
+	compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon";
+	reg = <0x314000 0x1000>;
+	interrupts = <93 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-usb2-dr-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-usb2-dr-0.dtsi
new file mode 100644
index 0000000..4dd6f84
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-usb2-dr-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ USB DR device tree stub [ controller @ offset 0x211000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+usb@211000 {
+	compatible = "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+	reg = <0x211000 0x1000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	interrupts = <45 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-usb2-mph-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-usb2-mph-0.dtsi
new file mode 100644
index 0000000..f053835
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-usb2-mph-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ USB Host device tree stub [ controller @ offset 0x210000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+usb@210000 {
+	compatible = "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
+	reg = <0x210000 0x1000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	interrupts = <44 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/gef_ppc9a.dts b/arch/powerpc/boot/dts/gef_ppc9a.dts
index 2266bbb..38dcb96 100644
--- a/arch/powerpc/boot/dts/gef_ppc9a.dts
+++ b/arch/powerpc/boot/dts/gef_ppc9a.dts
@@ -339,7 +339,7 @@
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x100>;
 			clock-frequency = <0>;
 			interrupts = <0x2a 0x2>;
@@ -349,7 +349,7 @@
 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4600 0x100>;
 			clock-frequency = <0>;
 			interrupts = <0x1c 0x2>;
diff --git a/arch/powerpc/boot/dts/gef_sbc310.dts b/arch/powerpc/boot/dts/gef_sbc310.dts
index 429e87d..5ab8932 100644
--- a/arch/powerpc/boot/dts/gef_sbc310.dts
+++ b/arch/powerpc/boot/dts/gef_sbc310.dts
@@ -337,7 +337,7 @@
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x100>;
 			clock-frequency = <0>;
 			interrupts = <0x2a 0x2>;
@@ -347,7 +347,7 @@
 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4600 0x100>;
 			clock-frequency = <0>;
 			interrupts = <0x1c 0x2>;
diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts
index d81201a..d5341f5 100644
--- a/arch/powerpc/boot/dts/gef_sbc610.dts
+++ b/arch/powerpc/boot/dts/gef_sbc610.dts
@@ -337,7 +337,7 @@
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x100>;
 			clock-frequency = <0>;
 			interrupts = <0x2a 0x2>;
@@ -347,7 +347,7 @@
 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4600 0x100>;
 			clock-frequency = <0>;
 			interrupts = <0x1c 0x2>;
diff --git a/arch/powerpc/boot/dts/klondike.dts b/arch/powerpc/boot/dts/klondike.dts
new file mode 100644
index 0000000..8c94290
--- /dev/null
+++ b/arch/powerpc/boot/dts/klondike.dts
@@ -0,0 +1,227 @@
+/*
+ * Device Tree for Klondike (APM8018X) board.
+ *
+ * Copyright (c) 2010, Applied Micro Circuits Corporation
+ * Author: Tanmay Inamdar <tinamdar@apm.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "apm,klondike";
+	compatible = "apm,klondike";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,apm8018x";
+			reg = <0x00000000>;
+			clock-frequency = <300000000>; /* Filled in by U-Boot */
+			timebase-frequency = <300000000>; /* Filled in by U-Boot */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <16384>; /* 16 kB */
+			d-cache-size = <16384>; /* 16 kB */
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* Filled in by U-Boot */
+	};
+
+	UIC0: interrupt-controller {
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x010>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x010>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0x0e0 0x010>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x0a 0x4 0x0b 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC3: interrupt-controller3 {
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <3>;
+		dcr-reg = <0x0f0 0x010>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	plb {
+		compatible = "ibm,plb4";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by U-Boot */
+
+		SDRAM0: memory-controller {
+			compatible = "ibm,sdram-apm8018x";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal2";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <2>;
+			num-rx-chans = <16>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-parent = <&UIC1>;
+			interrupts = </*TXEOB*/   0x6 0x4
+					/*RXEOB*/ 0x7 0x4
+					/*SERR*/  0x1 0x4
+					/*TXDE*/  0x2 0x4
+					/*RXDE*/  0x3 0x4>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x20000000 0x20000000 0x30000000
+				  0x50000000 0x50000000 0x10000000
+				  0x60000000 0x60000000 0x10000000
+				  0xFE000000 0xFE000000 0x00010000>;
+			dcr-reg = <0x100 0x020>;
+			clock-frequency = <300000000>; /* Filled in by U-Boot */
+
+			RGMII0: emac-rgmii@400a2000 {
+				compatible = "ibm,rgmii";
+				reg = <0x400a2000 0x00000010>;
+				has-mdio;
+			};
+
+			TAH0: emac-tah@400a3000 {
+				compatible = "ibm,tah";
+				reg = <0x400a3000 0x100>;
+			};
+
+			TAH1: emac-tah@400a4000 {
+				compatible = "ibm,tah";
+				reg = <0x400a4000 0x100>;
+			};
+
+			EMAC0: ethernet@400a0000 {
+				compatible = "ibm,emac4", "ibm-emac4sync";
+				interrupt-parent = <&EMAC0>;
+				interrupts = <0x0>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x13 0x4>;
+				reg = <0x400a0000 0x00000100>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0x0>;
+				mal-rx-channel = <0x0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rgmii";
+				phy-address = <0x2>;
+				turbo = "no";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <0>;
+				tah-device = <&TAH0>;
+				tah-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+
+			EMAC1: ethernet@400a1000 {
+				compatible = "ibm,emac4", "ibm-emac4sync";
+				status = "disabled";
+				interrupt-parent = <&EMAC1>;
+				interrupts = <0x0>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x14 0x4>;
+				reg = <0x400a1000 0x00000100>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <1>;
+				mal-rx-channel = <8>;
+				cell-index = <1>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rgmii";
+				phy-address = <0x3>;
+				turbo = "no";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <1>;
+				tah-device = <&TAH1>;
+				tah-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+		};
+	};
+
+	chosen {
+		linux,stdout-path = "/plb/opb/serial@50001000";
+	};
+};
diff --git a/arch/powerpc/boot/dts/kmeter1.dts b/arch/powerpc/boot/dts/kmeter1.dts
index d16bae1..983aee1 100644
--- a/arch/powerpc/boot/dts/kmeter1.dts
+++ b/arch/powerpc/boot/dts/kmeter1.dts
@@ -80,7 +80,7 @@
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x100>;
 			clock-frequency = <264000000>;
 			interrupts = <9 0x8>;
diff --git a/arch/powerpc/boot/dts/kuroboxHD.dts b/arch/powerpc/boot/dts/kuroboxHD.dts
index 8d725d1..0a45451 100644
--- a/arch/powerpc/boot/dts/kuroboxHD.dts
+++ b/arch/powerpc/boot/dts/kuroboxHD.dts
@@ -84,7 +84,7 @@ XXXX add flash parts, rtc, ??
 		serial0: serial@80004500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x80004500 0x8>;
 			clock-frequency = <97553800>;
 			current-speed = <9600>;
@@ -95,7 +95,7 @@ XXXX add flash parts, rtc, ??
 		serial1: serial@80004600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x80004600 0x8>;
 			clock-frequency = <97553800>;
 			current-speed = <57600>;
diff --git a/arch/powerpc/boot/dts/kuroboxHG.dts b/arch/powerpc/boot/dts/kuroboxHG.dts
index b13a11e..0e758b3 100644
--- a/arch/powerpc/boot/dts/kuroboxHG.dts
+++ b/arch/powerpc/boot/dts/kuroboxHG.dts
@@ -84,7 +84,7 @@ XXXX add flash parts, rtc, ??
 		serial0: serial@80004500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x80004500 0x8>;
 			clock-frequency = <130041000>;
 			current-speed = <9600>;
@@ -95,7 +95,7 @@ XXXX add flash parts, rtc, ??
 		serial1: serial@80004600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x80004600 0x8>;
 			clock-frequency = <130041000>;
 			current-speed = <57600>;
diff --git a/arch/powerpc/boot/dts/mpc8308_p1m.dts b/arch/powerpc/boot/dts/mpc8308_p1m.dts
index 697b3f6..22b0832 100644
--- a/arch/powerpc/boot/dts/mpc8308_p1m.dts
+++ b/arch/powerpc/boot/dts/mpc8308_p1m.dts
@@ -233,7 +233,7 @@
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x100>;
 			clock-frequency = <133333333>;
 			interrupts = <9 0x8>;
@@ -243,7 +243,7 @@
 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4600 0x100>;
 			clock-frequency = <133333333>;
 			interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc8308rdb.dts b/arch/powerpc/boot/dts/mpc8308rdb.dts
index a0bd188..f66d10d 100644
--- a/arch/powerpc/boot/dts/mpc8308rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8308rdb.dts
@@ -208,7 +208,7 @@
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x100>;
 			clock-frequency = <133333333>;
 			interrupts = <9 0x8>;
@@ -218,7 +218,7 @@
 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4600 0x100>;
 			clock-frequency = <133333333>;
 			interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts
index ac1eb32..1c836c6 100644
--- a/arch/powerpc/boot/dts/mpc8313erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8313erdb.dts
@@ -261,7 +261,7 @@
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x100>;
 			clock-frequency = <0>;
 			interrupts = <9 0x8>;
@@ -271,7 +271,7 @@
 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4600 0x100>;
 			clock-frequency = <0>;
 			interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts
index 4dd08c3..811848e 100644
--- a/arch/powerpc/boot/dts/mpc8315erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8315erdb.dts
@@ -265,7 +265,7 @@
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x100>;
 			clock-frequency = <133333333>;
 			interrupts = <9 0x8>;
@@ -275,7 +275,7 @@
 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4600 0x100>;
 			clock-frequency = <133333333>;
 			interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts
index 05ad8c9..da9c72d 100644
--- a/arch/powerpc/boot/dts/mpc832x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -105,7 +105,7 @@
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x100>;
 			clock-frequency = <0>;
 			interrupts = <9 0x8>;
@@ -115,7 +115,7 @@
 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4600 0x100>;
 			clock-frequency = <0>;
 			interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index f4fadb23a..ff7b15b 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -83,7 +83,7 @@
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x100>;
 			clock-frequency = <0>;
 			interrupts = <9 0x8>;
@@ -93,7 +93,7 @@
 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4600 0x100>;
 			clock-frequency = <0>;
 			interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts
index 505dc84..2608679 100644
--- a/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -283,7 +283,7 @@
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x100>;
 			clock-frequency = <0>;		// from bootloader
 			interrupts = <9 0x8>;
@@ -293,7 +293,7 @@
 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4600 0x100>;
 			clock-frequency = <0>;		// from bootloader
 			interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
index eb73211..6cd044d 100644
--- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
@@ -189,7 +189,7 @@
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x100>;
 			clock-frequency = <0>;		// from bootloader
 			interrupts = <9 0x8>;
@@ -199,7 +199,7 @@
 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4600 0x100>;
 			clock-frequency = <0>;		// from bootloader
 			interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts
index 230febb..4552864 100644
--- a/arch/powerpc/boot/dts/mpc834x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc834x_mds.dts
@@ -242,7 +242,7 @@
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x100>;
 			clock-frequency = <0>;
 			interrupts = <9 0x8>;
@@ -252,7 +252,7 @@
 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4600 0x100>;
 			clock-frequency = <0>;
 			interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index 45cfa1c5..c0e450a 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -136,7 +136,7 @@
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x100>;
 			clock-frequency = <264000000>;
 			interrupts = <9 0x8>;
@@ -146,7 +146,7 @@
 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4600 0x100>;
 			clock-frequency = <264000000>;
 			interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts
index bdf4459..b6e9aec 100644
--- a/arch/powerpc/boot/dts/mpc836x_rdk.dts
+++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts
@@ -102,7 +102,7 @@
 
 		serial0: serial@4500 {
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x100>;
 			interrupts = <9 8>;
 			interrupt-parent = <&ipic>;
@@ -112,7 +112,7 @@
 
 		serial1: serial@4600 {
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4600 0x100>;
 			interrupts = <10 8>;
 			interrupt-parent = <&ipic>;
diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts
index 855782c..cfccef5 100644
--- a/arch/powerpc/boot/dts/mpc8377_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8377_mds.dts
@@ -276,7 +276,7 @@
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x100>;
 			clock-frequency = <0>;
 			interrupts = <9 0x8>;
@@ -286,7 +286,7 @@
 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4600 0x100>;
 			clock-frequency = <0>;
 			interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts
index dbc1b98..353deff 100644
--- a/arch/powerpc/boot/dts/mpc8377_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts
@@ -321,7 +321,7 @@
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x100>;
 			clock-frequency = <0>;
 			interrupts = <9 0x8>;
@@ -331,7 +331,7 @@
 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4600 0x100>;
 			clock-frequency = <0>;
 			interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc8377_wlan.dts b/arch/powerpc/boot/dts/mpc8377_wlan.dts
index 9ea7830..ef4a305 100644
--- a/arch/powerpc/boot/dts/mpc8377_wlan.dts
+++ b/arch/powerpc/boot/dts/mpc8377_wlan.dts
@@ -304,7 +304,7 @@
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x100>;
 			clock-frequency = <0>;
 			interrupts = <9 0x8>;
@@ -314,7 +314,7 @@
 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4600 0x100>;
 			clock-frequency = <0>;
 			interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts
index f70cf60..538fcb9 100644
--- a/arch/powerpc/boot/dts/mpc8378_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8378_mds.dts
@@ -315,7 +315,7 @@
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x100>;
 			clock-frequency = <0>;
 			interrupts = <9 0x8>;
@@ -325,7 +325,7 @@
 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4600 0x100>;
 			clock-frequency = <0>;
 			interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts
index 3447eb9..32333a9 100644
--- a/arch/powerpc/boot/dts/mpc8378_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts
@@ -321,7 +321,7 @@
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x100>;
 			clock-frequency = <0>;
 			interrupts = <9 0x8>;
@@ -331,7 +331,7 @@
 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4600 0x100>;
 			clock-frequency = <0>;
 			interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts
index 645ec51..5387092 100644
--- a/arch/powerpc/boot/dts/mpc8379_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8379_mds.dts
@@ -313,7 +313,7 @@
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x100>;
 			clock-frequency = <0>;
 			interrupts = <9 0x8>;
@@ -323,7 +323,7 @@
 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4600 0x100>;
 			clock-frequency = <0>;
 			interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts
index 15560c6..46224c2 100644
--- a/arch/powerpc/boot/dts/mpc8379_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts
@@ -319,7 +319,7 @@
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x100>;
 			clock-frequency = <0>;
 			interrupts = <9 0x8>;
@@ -329,7 +329,7 @@
 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4600 0x100>;
 			clock-frequency = <0>;
 			interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts
index a75c10e..c158815 100644
--- a/arch/powerpc/boot/dts/mpc8536ds.dts
+++ b/arch/powerpc/boot/dts/mpc8536ds.dts
@@ -9,24 +9,11 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "fsl/mpc8536si-pre.dtsi"
 
 / {
 	model = "fsl,mpc8536ds";
 	compatible = "fsl,mpc8536ds";
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		pci2 = &pci2;
-		pci3 = &pci3;
-	};
 
 	cpus {
 		#cpus = <1>;
@@ -45,403 +32,34 @@
 		reg = <0 0 0 0>;	// Filled by U-Boot
 	};
 
-	soc@ffe00000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x0 0 0xffe00000 0x100000>;
-		bus-frequency = <0>;		// Filled out by uboot.
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <12>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,mpc8536-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,mpc8536-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 0x2>;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,mpc8536-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <16 0x2>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 0x2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 0x2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-			rtc@68 {
-				compatible = "dallas,ds3232";
-				reg = <0x68>;
-				interrupts = <0 0x1>;
-				interrupt-parent = <&mpic>;
-			};
-		};
-
-		spi@7000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc8536-espi";
-			reg = <0x7000 0x1000>;
-			interrupts = <59 0x2>;
-			interrupt-parent = <&mpic>;
-			fsl,espi-num-chipselects = <4>;
-
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "spansion,s25sl12801";
-				reg = <0>;
-				spi-max-frequency = <40000000>;
-				partition@u-boot {
-					label = "u-boot";
-					reg = <0x00000000 0x00100000>;
-					read-only;
-				};
-				partition@kernel {
-					label = "kernel";
-					reg = <0x00100000 0x00500000>;
-					read-only;
-				};
-				partition@dtb {
-					label = "dtb";
-					reg = <0x00600000 0x00100000>;
-					read-only;
-				};
-				partition@fs {
-					label = "file system";
-					reg = <0x00700000 0x00900000>;
-				};
-			};
-			flash@1 {
-				compatible = "spansion,s25sl12801";
-				reg = <1>;
-				spi-max-frequency = <40000000>;
-			};
-			flash@2 {
-				compatible = "spansion,s25sl12801";
-				reg = <2>;
-				spi-max-frequency = <40000000>;
-			};
-			flash@3 {
-				compatible = "spansion,s25sl12801";
-				reg = <3>;
-				spi-max-frequency = <40000000>;
-			};
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8536-dma", "fsl,eloplus-dma";
-			reg = <0x21300 4>;
-			ranges = <0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8536-dma-channel",
-					     "fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8536-dma-channel",
-					     "fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8536-dma-channel",
-					     "fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8536-dma-channel",
-					     "fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		usb@22000 {
-			compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
-			reg = <0x22000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupt-parent = <&mpic>;
-			interrupts = <28 0x2>;
-			phy_type = "ulpi";
-		};
-
-		usb@23000 {
-			compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
-			reg = <0x23000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupt-parent = <&mpic>;
-			interrupts = <46 0x2>;
-			phy_type = "ulpi";
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30 2 34 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy1>;
-			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@0 {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 0x1>;
-					reg = <0>;
-					device_type = "ethernet-phy";
-				};
-				phy1: ethernet-phy@1 {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 0x1>;
-					reg = <1>;
-					device_type = "ethernet-phy";
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@26000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x26000 0x1000>;
-			ranges = <0x0 0x26000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <31 2 32 2 33 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy0>;
-			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		usb@2b000 {
-			compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr";
-			reg = <0x2b000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupt-parent = <&mpic>;
-			interrupts = <60 0x2>;
-			dr_mode = "peripheral";
-			phy_type = "ulpi";
-		};
-
-		sdhci@2e000 {
-			compatible = "fsl,mpc8536-esdhc", "fsl,esdhc";
-			reg = <0x2e000 0x1000>;
-			interrupts = <72 0x2>;
-			interrupt-parent = <&mpic>;
-			clock-frequency = <250000000>;
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 0x2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 0x2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
-				     "fsl,sec2.1", "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <45 2 58 2>;
-			interrupt-parent = <&mpic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0x9fe>;
-			fsl,descriptor-types-mask = <0x3ab0ebf>;
-		};
-
-		sata@18000 {
-			compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
-			reg = <0x18000 0x1000>;
-			cell-index = <1>;
-			interrupts = <74 0x2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		sata@19000 {
-			compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
-			reg = <0x19000 0x1000>;
-			cell-index = <2>;
-			interrupts = <41 0x2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		global-utilities@e0000 {	//global utilities block
-			compatible = "fsl,mpc8548-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
-		};
-
-		mpic: pic@40000 {
-			clock-frequency = <0>;
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-			big-endian;
-		};
+	lbc: localbus@ffe05000 {
+		reg = <0 0xffe05000 0 0x1000>;
+	};
 
-		msi@41600 {
-			compatible = "fsl,mpc8536-msi", "fsl,mpic-msi";
-			reg = <0x41600 0x80>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe0 0
-				0xe1 0
-				0xe2 0
-				0xe3 0
-				0xe4 0
-				0xe5 0
-				0xe6 0
-				0xe7 0>;
-			interrupt-parent = <&mpic>;
-		};
+	board_soc: soc: soc@ffe00000 {
+		ranges = <0x0 0 0xffe00000 0x100000>;
 	};
 
 	pci0: pci@ffe08000 {
-		compatible = "fsl,mpc8540-pci";
-		device_type = "pci";
+		reg = <0 0xffe08000 0 0x1000>;
+		ranges = <0x02000000 0 0x80000000 0 0x80000000 0 0x10000000
+			  0x01000000 0 0x00000000 0 0xffc00000 0 0x00010000>;
+		clock-frequency = <66666666>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
 			/* IDSEL 0x11 J17 Slot 1 */
-			0x8800 0 0 1 &mpic 1 1
-			0x8800 0 0 2 &mpic 2 1
-			0x8800 0 0 3 &mpic 3 1
-			0x8800 0 0 4 &mpic 4 1>;
-
-		interrupt-parent = <&mpic>;
-		interrupts = <24 0x2>;
-		bus-range = <0 0xff>;
-		ranges = <0x02000000 0 0x80000000 0 0x80000000 0 0x10000000
-			  0x01000000 0 0x00000000 0 0xffc00000 0 0x00010000>;
-		clock-frequency = <66666666>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0 0xffe08000 0 0x1000>;
+			0x8800 0 0 1 &mpic 1 1 0 0
+			0x8800 0 0 2 &mpic 2 1 0 0
+			0x8800 0 0 3 &mpic 3 1 0 0
+			0x8800 0 0 4 &mpic 4 1 0 0>;
 	};
 
 	pci1: pcie@ffe09000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
 		reg = <0 0xffe09000 0 0x1000>;
-		bus-range = <0 0xff>;
 		ranges = <0x02000000 0 0x98000000 0 0x98000000 0 0x08000000
 			  0x01000000 0 0x00000000 0 0xffc20000 0 0x00010000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <25 0x2>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 4 1
-			0000 0 0 2 &mpic 5 1
-			0000 0 0 3 &mpic 6 1
-			0000 0 0 4 &mpic 7 1
-			>;
 		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
 			ranges = <0x02000000 0 0x98000000
 				  0x02000000 0 0x98000000
 				  0 0x08000000
@@ -453,31 +71,10 @@
 	};
 
 	pci2: pcie@ffe0a000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
 		reg = <0 0xffe0a000 0 0x1000>;
-		bus-range = <0 0xff>;
 		ranges = <0x02000000 0 0x90000000 0 0x90000000 0 0x08000000
 			  0x01000000 0 0x00000000 0 0xffc10000 0 0x00010000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <26 0x2>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 0 1
-			0000 0 0 2 &mpic 1 1
-			0000 0 0 3 &mpic 2 1
-			0000 0 0 4 &mpic 3 1
-			>;
 		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
 			ranges = <0x02000000 0 0x90000000
 				  0x02000000 0 0x90000000
 				  0 0x08000000
@@ -489,32 +86,10 @@
 	};
 
 	pci3: pcie@ffe0b000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
 		reg = <0 0xffe0b000 0 0x1000>;
-		bus-range = <0 0xff>;
 		ranges = <0x02000000 0 0xa0000000 0 0xa0000000 0 0x20000000
 			  0x01000000 0 0x00000000 0 0xffc30000 0 0x00010000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <27 0x2>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 8 1
-			0000 0 0 2 &mpic 9 1
-			0000 0 0 3 &mpic 10 1
-			0000 0 0 4 &mpic 11 1
-			>;
-
 		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
 			ranges = <0x02000000 0 0xa0000000
 				  0x02000000 0 0xa0000000
 				  0 0x20000000
@@ -525,3 +100,6 @@
 		};
 	};
 };
+
+/include/ "fsl/mpc8536si-post.dtsi"
+/include/ "mpc8536ds.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8536ds.dtsi b/arch/powerpc/boot/dts/mpc8536ds.dtsi
new file mode 100644
index 0000000..1462e4c
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8536ds.dtsi
@@ -0,0 +1,141 @@
+/*
+ * MPC8536DS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_soc {
+	i2c@3100 {
+		rtc@68 {
+			compatible = "dallas,ds3232";
+			reg = <0x68>;
+			interrupts = <0 0x1 0 0>;
+		};
+	};
+
+	spi@7000 {
+		flash@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "spansion,s25sl12801";
+			reg = <0>;
+			spi-max-frequency = <40000000>;
+			partition@u-boot {
+				label = "u-boot";
+				reg = <0x00000000 0x00100000>;
+				read-only;
+			};
+			partition@kernel {
+				label = "kernel";
+				reg = <0x00100000 0x00500000>;
+				read-only;
+			};
+			partition@dtb {
+				label = "dtb";
+				reg = <0x00600000 0x00100000>;
+				read-only;
+			};
+			partition@fs {
+				label = "file system";
+				reg = <0x00700000 0x00900000>;
+			};
+		};
+		flash@1 {
+			compatible = "spansion,s25sl12801";
+			reg = <1>;
+			spi-max-frequency = <40000000>;
+		};
+		flash@2 {
+			compatible = "spansion,s25sl12801";
+			reg = <2>;
+			spi-max-frequency = <40000000>;
+		};
+		flash@3 {
+			compatible = "spansion,s25sl12801";
+			reg = <3>;
+			spi-max-frequency = <40000000>;
+		};
+	};
+
+	usb@22000 {
+		phy_type = "ulpi";
+	};
+
+	usb@23000 {
+		phy_type = "ulpi";
+	};
+
+	enet0: ethernet@24000 {
+		tbi-handle = <&tbi0>;
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	mdio@24520 {
+		phy0: ethernet-phy@0 {
+			interrupts = <10 0x1 0 0>;
+			reg = <0>;
+			device_type = "ethernet-phy";
+		};
+		phy1: ethernet-phy@1 {
+			interrupts = <10 0x1 0 0>;
+			reg = <1>;
+			device_type = "ethernet-phy";
+		};
+		tbi0: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet2: ethernet@26000 {
+		tbi-handle = <&tbi1>;
+		phy-handle = <&phy0>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	mdio@26520 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,gianfar-tbi";
+		reg = <0x26520 0x20>;
+
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	usb@2b000 {
+		dr_mode = "peripheral";
+		phy_type = "ulpi";
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc8536ds_36b.dts b/arch/powerpc/boot/dts/mpc8536ds_36b.dts
index d95b260..8f4b929 100644
--- a/arch/powerpc/boot/dts/mpc8536ds_36b.dts
+++ b/arch/powerpc/boot/dts/mpc8536ds_36b.dts
@@ -1,5 +1,5 @@
 /*
- * MPC8536 DS Device Tree Source
+ * MPC8536DS Device Tree Source (36-bit address map)
  *
  * Copyright 2008-2009 Freescale Semiconductor, Inc.
  *
@@ -9,24 +9,11 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "fsl/mpc8536si-pre.dtsi"
 
 / {
 	model = "fsl,mpc8536ds";
 	compatible = "fsl,mpc8536ds";
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		pci2 = &pci2;
-		pci3 = &pci3;
-	};
 
 	cpus {
 		#cpus = <1>;
@@ -45,351 +32,34 @@
 		reg = <0 0 0 0>;	// Filled by U-Boot
 	};
 
-	soc@fffe00000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x0 0xf 0xffe00000 0x100000>;
-		bus-frequency = <0>;		// Filled out by uboot.
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <12>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,mpc8536-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,mpc8536-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 0x2>;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,mpc8536-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <16 0x2>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 0x2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 0x2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-			rtc@68 {
-				compatible = "dallas,ds3232";
-				reg = <0x68>;
-				interrupts = <0 0x1>;
-				interrupt-parent = <&mpic>;
-			};
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8536-dma", "fsl,eloplus-dma";
-			reg = <0x21300 4>;
-			ranges = <0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8536-dma-channel",
-					     "fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8536-dma-channel",
-					     "fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8536-dma-channel",
-					     "fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8536-dma-channel",
-					     "fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		usb@22000 {
-			compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
-			reg = <0x22000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupt-parent = <&mpic>;
-			interrupts = <28 0x2>;
-			phy_type = "ulpi";
-		};
-
-		usb@23000 {
-			compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
-			reg = <0x23000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupt-parent = <&mpic>;
-			interrupts = <46 0x2>;
-			phy_type = "ulpi";
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30 2 34 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy1>;
-			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@0 {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 0x1>;
-					reg = <0>;
-					device_type = "ethernet-phy";
-				};
-				phy1: ethernet-phy@1 {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 0x1>;
-					reg = <1>;
-					device_type = "ethernet-phy";
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@26000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x26000 0x1000>;
-			ranges = <0x0 0x26000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <31 2 32 2 33 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy0>;
-			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		usb@2b000 {
-			compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr";
-			reg = <0x2b000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupt-parent = <&mpic>;
-			interrupts = <60 0x2>;
-			dr_mode = "peripheral";
-			phy_type = "ulpi";
-		};
-
-		sdhci@2e000 {
-			compatible = "fsl,mpc8536-esdhc", "fsl,esdhc";
-			reg = <0x2e000 0x1000>;
-			interrupts = <72 0x2>;
-			interrupt-parent = <&mpic>;
-			clock-frequency = <250000000>;
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 0x2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 0x2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
-				     "fsl,sec2.1", "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <45 2 58 2>;
-			interrupt-parent = <&mpic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0x9fe>;
-			fsl,descriptor-types-mask = <0x3ab0ebf>;
-		};
-
-		sata@18000 {
-			compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
-			reg = <0x18000 0x1000>;
-			cell-index = <1>;
-			interrupts = <74 0x2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		sata@19000 {
-			compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
-			reg = <0x19000 0x1000>;
-			cell-index = <2>;
-			interrupts = <41 0x2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		global-utilities@e0000 {	//global utilities block
-			compatible = "fsl,mpc8548-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
-		};
-
-		mpic: pic@40000 {
-			clock-frequency = <0>;
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-			big-endian;
-		};
+	lbc: localbus@ffe05000 {
+		reg = <0 0xffe05000 0 0x1000>;
+	};
 
-		msi@41600 {
-			compatible = "fsl,mpc8536-msi", "fsl,mpic-msi";
-			reg = <0x41600 0x80>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe0 0
-				0xe1 0
-				0xe2 0
-				0xe3 0
-				0xe4 0
-				0xe5 0
-				0xe6 0
-				0xe7 0>;
-			interrupt-parent = <&mpic>;
-		};
+	board_soc: soc: soc@fffe00000 {
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
 	};
 
-	pci0: pci@fffe08000 {
-		compatible = "fsl,mpc8540-pci";
-		device_type = "pci";
+	pci0: pci@ffe08000 {
+		reg = <0xf 0xffe08000 0 0x1000>;
+		ranges = <0x02000000 0 0xf0000000 0xc 0x00000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xffc00000 0 0x00010000>;
+		clock-frequency = <66666666>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
 			/* IDSEL 0x11 J17 Slot 1 */
-			0x8800 0 0 1 &mpic 1 1
-			0x8800 0 0 2 &mpic 2 1
-			0x8800 0 0 3 &mpic 3 1
-			0x8800 0 0 4 &mpic 4 1>;
-
-		interrupt-parent = <&mpic>;
-		interrupts = <24 0x2>;
-		bus-range = <0 0xff>;
-		ranges = <0x02000000 0 0xf0000000 0xc 0x00000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xf 0xffc00000 0 0x00010000>;
-		clock-frequency = <66666666>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xf 0xffe08000 0 0x1000>;
+			0x8800 0 0 1 &mpic 1 1 0 0
+			0x8800 0 0 2 &mpic 2 1 0 0
+			0x8800 0 0 3 &mpic 3 1 0 0
+			0x8800 0 0 4 &mpic 4 1 0 0>;
 	};
 
-	pci1: pcie@fffe09000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
+	pci1: pcie@ffe09000 {
 		reg = <0xf 0xffe09000 0 0x1000>;
-		bus-range = <0 0xff>;
 		ranges = <0x02000000 0 0xf8000000 0xc 0x18000000 0 0x08000000
 			  0x01000000 0 0x00000000 0xf 0xffc20000 0 0x00010000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <25 0x2>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 4 1
-			0000 0 0 2 &mpic 5 1
-			0000 0 0 3 &mpic 6 1
-			0000 0 0 4 &mpic 7 1
-			>;
 		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
 			ranges = <0x02000000 0 0xf8000000
 				  0x02000000 0 0xf8000000
 				  0 0x08000000
@@ -401,31 +71,10 @@
 	};
 
 	pci2: pcie@fffe0a000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
 		reg = <0xf 0xffe0a000 0 0x1000>;
-		bus-range = <0 0xff>;
 		ranges = <0x02000000 0 0xf8000000 0xc 0x10000000 0 0x08000000
 			  0x01000000 0 0x00000000 0xf 0xffc10000 0 0x00010000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <26 0x2>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 0 1
-			0000 0 0 2 &mpic 1 1
-			0000 0 0 3 &mpic 2 1
-			0000 0 0 4 &mpic 3 1
-			>;
 		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
 			ranges = <0x02000000 0 0xf8000000
 				  0x02000000 0 0xf8000000
 				  0 0x08000000
@@ -437,32 +86,10 @@
 	};
 
 	pci3: pcie@fffe0b000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
 		reg = <0xf 0xffe0b000 0 0x1000>;
-		bus-range = <0 0xff>;
 		ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x20000000
 			  0x01000000 0 0x00000000 0xf 0xffc30000 0 0x00010000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <27 0x2>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 8 1
-			0000 0 0 2 &mpic 9 1
-			0000 0 0 3 &mpic 10 1
-			0000 0 0 4 &mpic 11 1
-			>;
-
 		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000
 				  0 0x20000000
@@ -473,3 +100,6 @@
 		};
 	};
 };
+
+/include/ "fsl/mpc8536si-post.dtsi"
+/include/ "mpc8536ds.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts
index 8d1bf0f..f99fb11 100644
--- a/arch/powerpc/boot/dts/mpc8540ads.dts
+++ b/arch/powerpc/boot/dts/mpc8540ads.dts
@@ -243,7 +243,7 @@
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x100>; 	// reg base, size
 			clock-frequency = <0>; 	// should we fill in in uboot?
 			interrupts = <42 2>;
@@ -253,7 +253,7 @@
 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4600 0x100>;	// reg base, size
 			clock-frequency = <0>; 	// should we fill in in uboot?
 			interrupts = <42 2>;
diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts
index 87ff965..0f5e939 100644
--- a/arch/powerpc/boot/dts/mpc8541cds.dts
+++ b/arch/powerpc/boot/dts/mpc8541cds.dts
@@ -209,7 +209,7 @@
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x100>; 	// reg base, size
 			clock-frequency = <0>; 	// should we fill in in uboot?
 			interrupts = <42 2>;
@@ -219,7 +219,7 @@
 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4600 0x100>;	// reg base, size
 			clock-frequency = <0>; 	// should we fill in in uboot?
 			interrupts = <42 2>;
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts
index d793968..e934987 100644
--- a/arch/powerpc/boot/dts/mpc8544ds.dts
+++ b/arch/powerpc/boot/dts/mpc8544ds.dts
@@ -9,339 +9,52 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "fsl/mpc8544si-pre.dtsi"
+
 / {
 	model = "MPC8544DS";
 	compatible = "MPC8544DS", "MPC85xxDS";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		pci2 = &pci2;
-		pci3 = &pci3;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8544@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <0x8000>;		// L1, 32K
-			i-cache-size = <0x8000>;		// L1, 32K
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-			next-level-cache = <&L2>;
-		};
-	};
 
 	memory {
 		device_type = "memory";
-		reg = <0x0 0x0>;	// Filled by U-Boot
+		reg = <0 0 0 0>;	// Filled by U-Boot
 	};
 
-	soc8544@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-
-		ranges = <0x0 0xe0000000 0x100000>;
-		bus-frequency = <0>;		// Filled out by uboot.
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <10>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,mpc8544-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,mpc8544-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,mpc8544-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;	// 32 bytes
-			cache-size = <0x40000>;	// L2, 256K
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8544-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8544-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8544-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8544-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8544-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30 2 34 2>;
-			interrupt-parent = <&mpic>;
-			phy-handle = <&phy0>;
-			tbi-handle = <&tbi0>;
-			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@0 {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 1>;
-					reg = <0x0>;
-					device_type = "ethernet-phy";
-				};
-				phy1: ethernet-phy@1 {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 1>;
-					reg = <0x1>;
-					device_type = "ethernet-phy";
-				};
-
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@26000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x26000 0x1000>;
-			ranges = <0x0 0x26000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <31 2 32 2 33 2>;
-			interrupt-parent = <&mpic>;
-			phy-handle = <&phy1>;
-			tbi-handle = <&tbi1>;
-			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		global-utilities@e0000 {	//global utilities block
-			compatible = "fsl,mpc8548-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec2.1", "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <45 2>;
-			interrupt-parent = <&mpic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0xfe>;
-			fsl,descriptor-types-mask = <0x12b0ebf>;
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
+	lbc: localbus@e0005000 {
+		reg = <0 0xe0005000 0 0x1000>;
+	};
 
-		msi@41600 {
-			compatible = "fsl,mpc8544-msi", "fsl,mpic-msi";
-			reg = <0x41600 0x80>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe0 0
-				0xe1 0
-				0xe2 0
-				0xe3 0
-				0xe4 0
-				0xe5 0
-				0xe6 0
-				0xe7 0>;
-			interrupt-parent = <&mpic>;
-		};
+	board_soc: soc: soc8544@e0000000 {
+		ranges = <0x0 0x0 0xe0000000 0x100000>;
 	};
 
 	pci0: pci@e0008000 {
-		compatible = "fsl,mpc8540-pci";
-		device_type = "pci";
+		reg = <0 0xe0008000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xe1000000 0x0 0x10000>;
+		clock-frequency = <66666666>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
 			/* IDSEL 0x11 J17 Slot 1 */
-			0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
-			0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
-			0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
-			0x8800 0x0 0x0 0x4 &mpic 0x1 0x1
+			0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+			0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+			0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+			0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
 
 			/* IDSEL 0x12 J16 Slot 2 */
 
-			0x9000 0x0 0x0 0x1 &mpic 0x3 0x1
-			0x9000 0x0 0x0 0x2 &mpic 0x4 0x1
-			0x9000 0x0 0x0 0x3 &mpic 0x2 0x1
-			0x9000 0x0 0x0 0x4 &mpic 0x1 0x1>;
-
-		interrupt-parent = <&mpic>;
-		interrupts = <24 2>;
-		bus-range = <0 255>;
-		ranges = <0x2000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000
-			  0x1000000 0x0 0x0 0xe1000000 0x0 0x10000>;
-		clock-frequency = <66666666>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe0008000 0x1000>;
+			0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+			0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+			0x9000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+			0x9000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0>;
 	};
 
 	pci1: pcie@e0009000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe0009000 0x1000>;
-		bus-range = <0 255>;
-		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
-			  0x1000000 0x0 0x0 0xe1010000 0x0 0x10000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <25 2>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x4 0x1
-			0000 0x0 0x0 0x2 &mpic 0x5 0x1
-			0000 0x0 0x0 0x3 &mpic 0x6 0x1
-			0000 0x0 0x0 0x4 &mpic 0x7 0x1
-			>;
+		reg = <0x0 0xe0009000 0x0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xe1010000 0x0 0x10000>;
 		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
 			ranges = <0x2000000 0x0 0x80000000
 				  0x2000000 0x0 0x80000000
 				  0x0 0x20000000
@@ -353,31 +66,10 @@
 	};
 
 	pci2: pcie@e000a000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe000a000 0x1000>;
-		bus-range = <0 255>;
-		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
-			  0x1000000 0x0 0x0 0xe1020000 0x0 0x10000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <26 2>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x0 0x1
-			0000 0x0 0x0 0x2 &mpic 0x1 0x1
-			0000 0x0 0x0 0x3 &mpic 0x2 0x1
-			0000 0x0 0x0 0x4 &mpic 0x3 0x1
-			>;
+		reg = <0x0 0xe000a000 0x0 0x1000>;
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x10000000
+			  0x1000000 0x0 0x00000000 0 0xe1020000 0x0 0x10000>;
 		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
 			ranges = <0x2000000 0x0 0xa0000000
 				  0x2000000 0x0 0xa0000000
 				  0x0 0x10000000
@@ -388,44 +80,11 @@
 		};
 	};
 
-	pci3: pcie@e000b000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe000b000 0x1000>;
-		bus-range = <0 255>;
-		ranges = <0x2000000 0x0 0xb0000000 0xb0000000 0x0 0x100000
-			  0x1000000 0x0 0x0 0xb0100000 0x0 0x100000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <27 2>;
-		interrupt-map-mask = <0xff00 0x0 0x0 0x1>;
-		interrupt-map = <
-			// IDSEL 0x1c  USB
-			0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
-			0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
-			0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
-			0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
-
-			// IDSEL 0x1d  Audio
-			0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
-
-			// IDSEL 0x1e Legacy
-			0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
-			0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
-
-			// IDSEL 0x1f IDE/SATA
-			0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
-			0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
-		>;
-
+	board_pci3: pci3: pcie@e000b000 {
+		reg = <0x0 0xe000b000 0x0 0x1000>;
+		ranges = <0x2000000 0x0 0xb0000000 0 0xb0000000 0x0 0x100000
+			  0x1000000 0x0 0x00000000 0 0xb0100000 0x0 0x100000>;
 		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
 			ranges = <0x2000000 0x0 0xb0000000
 				  0x2000000 0x0 0xb0000000
 				  0x0 0x100000
@@ -433,70 +92,14 @@
 				  0x1000000 0x0 0x0
 				  0x1000000 0x0 0x0
 				  0x0 0x100000>;
-
-			uli1575@0 {
-				reg = <0x0 0x0 0x0 0x0 0x0>;
-				#size-cells = <2>;
-				#address-cells = <3>;
-				ranges = <0x2000000 0x0 0xb0000000
-					  0x2000000 0x0 0xb0000000
-					  0x0 0x100000
-
-					  0x1000000 0x0 0x0
-					  0x1000000 0x0 0x0
-					  0x0 0x100000>;
-				isa@1e {
-					device_type = "isa";
-					#interrupt-cells = <2>;
-					#size-cells = <1>;
-					#address-cells = <2>;
-					reg = <0xf000 0x0 0x0 0x0 0x0>;
-					ranges = <0x1 0x0
-						  0x1000000 0x0 0x0
-						  0x1000>;
-					interrupt-parent = <&i8259>;
-
-					i8259: interrupt-controller@20 {
-						reg = <0x1 0x20 0x2
-						       0x1 0xa0 0x2
-						       0x1 0x4d0 0x2>;
-						interrupt-controller;
-						device_type = "interrupt-controller";
-						#address-cells = <0>;
-						#interrupt-cells = <2>;
-						compatible = "chrp,iic";
-						interrupts = <9 2>;
-						interrupt-parent = <&mpic>;
-					};
-
-					i8042@60 {
-						#size-cells = <0>;
-						#address-cells = <1>;
-						reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
-						interrupts = <1 3 12 3>;
-						interrupt-parent = <&i8259>;
-
-						keyboard@0 {
-							reg = <0x0>;
-							compatible = "pnpPNP,303";
-						};
-
-						mouse@1 {
-							reg = <0x1>;
-							compatible = "pnpPNP,f03";
-						};
-					};
-
-					rtc@70 {
-						compatible = "pnpPNP,b00";
-						reg = <0x1 0x70 0x2>;
-					};
-
-					gpio@400 {
-						reg = <0x1 0x400 0x80>;
-					};
-				};
-			};
 		};
 	};
 };
+
+/*
+ * mpc8544ds.dtsi must be last to ensure board_pci3 overrides pci3 settings
+ * for interrupt-map & interrupt-map-mask
+ */
+
+/include/ "fsl/mpc8544si-post.dtsi"
+/include/ "mpc8544ds.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dtsi b/arch/powerpc/boot/dts/mpc8544ds.dtsi
new file mode 100644
index 0000000..270f64b
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8544ds.dtsi
@@ -0,0 +1,161 @@
+/*
+ * MPC8544DS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_soc {
+	enet0: ethernet@24000 {
+		phy-handle = <&phy0>;
+		tbi-handle = <&tbi0>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	mdio@24520 {
+		phy0: ethernet-phy@0 {
+			interrupts = <10 1 0 0>;
+			reg = <0x0>;
+			device_type = "ethernet-phy";
+		};
+		phy1: ethernet-phy@1 {
+			interrupts = <10 1 0 0>;
+			reg = <0x1>;
+			device_type = "ethernet-phy";
+		};
+
+		tbi0: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet2: ethernet@26000 {
+		phy-handle = <&phy1>;
+		tbi-handle = <&tbi1>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	mdio@26520 {
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+};
+
+&board_pci3 {
+	pcie@0 {
+		interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+		interrupt-map = <
+			// IDSEL 0x1c  USB
+			0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
+			0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
+			0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
+			0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
+
+			// IDSEL 0x1d  Audio
+			0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
+
+			// IDSEL 0x1e Legacy
+			0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
+			0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
+
+			// IDSEL 0x1f IDE/SATA
+			0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
+			0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
+			>;
+
+
+		uli1575@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			ranges = <0x2000000 0x0 0xb0000000
+				  0x2000000 0x0 0xb0000000
+				  0x0 0x100000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+			isa@1e {
+				device_type = "isa";
+				#interrupt-cells = <2>;
+				#size-cells = <1>;
+				#address-cells = <2>;
+				reg = <0xf000 0x0 0x0 0x0 0x0>;
+				ranges = <0x1 0x0 0x1000000 0x0 0x0
+					  0x1000>;
+				interrupt-parent = <&i8259>;
+
+				i8259: interrupt-controller@20 {
+					reg = <0x1 0x20 0x2
+					       0x1 0xa0 0x2
+					       0x1 0x4d0 0x2>;
+					interrupt-controller;
+					device_type = "interrupt-controller";
+					#address-cells = <0>;
+					#interrupt-cells = <2>;
+					compatible = "chrp,iic";
+					interrupts = <9 2 0 0>;
+					interrupt-parent = <&mpic>;
+				};
+
+				i8042@60 {
+					#size-cells = <0>;
+					#address-cells = <1>;
+					reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
+					interrupts = <1 3 12 3>;
+					interrupt-parent =
+						<&i8259>;
+
+					keyboard@0 {
+						reg = <0x0>;
+						compatible = "pnpPNP,303";
+					};
+
+					mouse@1 {
+						reg = <0x1>;
+						compatible = "pnpPNP,f03";
+					};
+				};
+
+				rtc@70 {
+					compatible = "pnpPNP,b00";
+					reg = <0x1 0x70 0x2>;
+				};
+
+				gpio@400 {
+					reg = <0x1 0x400 0x80>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index a17a557..07b8dae0 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -9,13 +9,11 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "fsl/mpc8548si-pre.dtsi"
 
 / {
 	model = "MPC8548CDS";
 	compatible = "MPC8548CDS", "MPC85xxCDS";
-	#address-cells = <1>;
-	#size-cells = <1>;
 
 	aliases {
 		ethernet0 = &enet0;
@@ -29,76 +27,19 @@
 		pci2 = &pci2;
 	};
 
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8548@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <0x8000>;		// L1, 32K
-			i-cache-size = <0x8000>;		// L1, 32K
-			timebase-frequency = <0>;	//  33 MHz, from uboot
-			bus-frequency = <0>;	// 166 MHz
-			clock-frequency = <0>;	// 825 MHz, from uboot
-			next-level-cache = <&L2>;
-		};
-	};
-
 	memory {
 		device_type = "memory";
-		reg = <0x0 0x8000000>;	// 128M at 0x0
+		reg = <0 0 0x0 0x8000000>;	// 128M at 0x0
 	};
 
-	soc8548@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x0 0xe0000000 0x100000>;
-		bus-frequency = <0>;
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <10>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,mpc8548-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,mpc8548-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
-		};
+	lbc: localbus@e0005000 {
+		reg = <0 0xe0005000 0 0x1000>;
+	};
 
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,mpc8548-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;	// 32 bytes
-			cache-size = <0x80000>;	// L2, 512K
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
+	soc: soc8548@e0000000 {
+		ranges = <0 0x0 0xe0000000 0x100000>;
 
 		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-
 			eeprom@50 {
 				compatible = "atmel,24c64";
 				reg = <0x50>;
@@ -116,351 +57,178 @@
 		};
 
 		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-
 			eeprom@50 {
 				compatible = "atmel,24c64";
 				reg = <0x50>;
 			};
 		};
 
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8548-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8548-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8548-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8548-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
 		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30 2 34 2>;
-			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi0>;
 			phy-handle = <&phy0>;
+		};
 
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@0 {
-					interrupt-parent = <&mpic>;
-					interrupts = <5 1>;
-					reg = <0x0>;
-					device_type = "ethernet-phy";
-				};
-				phy1: ethernet-phy@1 {
-					interrupt-parent = <&mpic>;
-					interrupts = <5 1>;
-					reg = <0x1>;
-					device_type = "ethernet-phy";
-				};
-				phy2: ethernet-phy@2 {
-					interrupt-parent = <&mpic>;
-					interrupts = <5 1>;
-					reg = <0x2>;
-					device_type = "ethernet-phy";
-				};
-				phy3: ethernet-phy@3 {
-					interrupt-parent = <&mpic>;
-					interrupts = <5 1>;
-					reg = <0x3>;
-					device_type = "ethernet-phy";
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
+		mdio@24520 {
+			phy0: ethernet-phy@0 {
+				interrupts = <5 1 0 0>;
+				reg = <0x0>;
+				device_type = "ethernet-phy";
+			};
+			phy1: ethernet-phy@1 {
+				interrupts = <5 1 0 0>;
+				reg = <0x1>;
+				device_type = "ethernet-phy";
+			};
+			phy2: ethernet-phy@2 {
+				interrupts = <5 1 0 0>;
+				reg = <0x2>;
+				device_type = "ethernet-phy";
+			};
+			phy3: ethernet-phy@3 {
+				interrupts = <5 1 0 0>;
+				reg = <0x3>;
+				device_type = "ethernet-phy";
+			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
 			};
 		};
 
 		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 2 36 2 40 2>;
-			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi1>;
 			phy-handle = <&phy1>;
+		};
 
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
+		mdio@25520 {
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
 			};
 		};
 
 		enet2: ethernet@26000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <2>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x26000 0x1000>;
-			ranges = <0x0 0x26000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <31 2 32 2 33 2>;
-			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi2>;
 			phy-handle = <&phy2>;
+		};
 
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi2: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
+		mdio@26520 {
+			tbi2: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
 			};
 		};
 
 		enet3: ethernet@27000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <3>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x27000 0x1000>;
-			ranges = <0x0 0x27000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <37 2 38 2 39 2>;
-			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi3>;
 			phy-handle = <&phy3>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi3: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4500 0x100>;	// reg base, size
-			clock-frequency = <0>;	// should we fill in in uboot?
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4600 0x100>;	// reg base, size
-			clock-frequency = <0>;	// should we fill in in uboot?
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
 		};
 
-		global-utilities@e0000 {	//global utilities reg
-			compatible = "fsl,mpc8548-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec2.1", "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <45 2>;
-			interrupt-parent = <&mpic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0xfe>;
-			fsl,descriptor-types-mask = <0x12b0ebf>;
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
+		mdio@27520 {
+			tbi3: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
 		};
 	};
 
 	pci0: pci@e0008000 {
+		reg = <0 0xe0008000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x10000000
+			  0x1000000 0x0 0x00000000 0 0xe2000000 0x0 0x800000>;
+		clock-frequency = <66666666>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x4 (PCIX Slot 2) */
-			0x2000 0x0 0x0 0x1 &mpic 0x0 0x1
-			0x2000 0x0 0x0 0x2 &mpic 0x1 0x1
-			0x2000 0x0 0x0 0x3 &mpic 0x2 0x1
-			0x2000 0x0 0x0 0x4 &mpic 0x3 0x1
+			0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+			0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+			0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+			0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
 
 			/* IDSEL 0x5 (PCIX Slot 3) */
-			0x2800 0x0 0x0 0x1 &mpic 0x1 0x1
-			0x2800 0x0 0x0 0x2 &mpic 0x2 0x1
-			0x2800 0x0 0x0 0x3 &mpic 0x3 0x1
-			0x2800 0x0 0x0 0x4 &mpic 0x0 0x1
+			0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
+			0x2800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
+			0x2800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
+			0x2800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
 
 			/* IDSEL 0x6 (PCIX Slot 4) */
-			0x3000 0x0 0x0 0x1 &mpic 0x2 0x1
-			0x3000 0x0 0x0 0x2 &mpic 0x3 0x1
-			0x3000 0x0 0x0 0x3 &mpic 0x0 0x1
-			0x3000 0x0 0x0 0x4 &mpic 0x1 0x1
+			0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+			0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+			0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
+			0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
 
 			/* IDSEL 0x8 (PCIX Slot 5) */
-			0x4000 0x0 0x0 0x1 &mpic 0x0 0x1
-			0x4000 0x0 0x0 0x2 &mpic 0x1 0x1
-			0x4000 0x0 0x0 0x3 &mpic 0x2 0x1
-			0x4000 0x0 0x0 0x4 &mpic 0x3 0x1
+			0x4000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+			0x4000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+			0x4000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+			0x4000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
 
 			/* IDSEL 0xC (Tsi310 bridge) */
-			0x6000 0x0 0x0 0x1 &mpic 0x0 0x1
-			0x6000 0x0 0x0 0x2 &mpic 0x1 0x1
-			0x6000 0x0 0x0 0x3 &mpic 0x2 0x1
-			0x6000 0x0 0x0 0x4 &mpic 0x3 0x1
+			0x6000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+			0x6000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+			0x6000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+			0x6000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
 
 			/* IDSEL 0x14 (Slot 2) */
-			0xa000 0x0 0x0 0x1 &mpic 0x0 0x1
-			0xa000 0x0 0x0 0x2 &mpic 0x1 0x1
-			0xa000 0x0 0x0 0x3 &mpic 0x2 0x1
-			0xa000 0x0 0x0 0x4 &mpic 0x3 0x1
+			0xa000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+			0xa000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+			0xa000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+			0xa000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
 
 			/* IDSEL 0x15 (Slot 3) */
-			0xa800 0x0 0x0 0x1 &mpic 0x1 0x1
-			0xa800 0x0 0x0 0x2 &mpic 0x2 0x1
-			0xa800 0x0 0x0 0x3 &mpic 0x3 0x1
-			0xa800 0x0 0x0 0x4 &mpic 0x0 0x1
+			0xa800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
+			0xa800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
+			0xa800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
+			0xa800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
 
 			/* IDSEL 0x16 (Slot 4) */
-			0xb000 0x0 0x0 0x1 &mpic 0x2 0x1
-			0xb000 0x0 0x0 0x2 &mpic 0x3 0x1
-			0xb000 0x0 0x0 0x3 &mpic 0x0 0x1
-			0xb000 0x0 0x0 0x4 &mpic 0x1 0x1
+			0xb000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+			0xb000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+			0xb000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
+			0xb000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
 
 			/* IDSEL 0x18 (Slot 5) */
-			0xc000 0x0 0x0 0x1 &mpic 0x0 0x1
-			0xc000 0x0 0x0 0x2 &mpic 0x1 0x1
-			0xc000 0x0 0x0 0x3 &mpic 0x2 0x1
-			0xc000 0x0 0x0 0x4 &mpic 0x3 0x1
+			0xc000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+			0xc000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+			0xc000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+			0xc000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
 
 			/* IDSEL 0x1C (Tsi310 bridge PCI primary) */
-			0xe000 0x0 0x0 0x1 &mpic 0x0 0x1
-			0xe000 0x0 0x0 0x2 &mpic 0x1 0x1
-			0xe000 0x0 0x0 0x3 &mpic 0x2 0x1
-			0xe000 0x0 0x0 0x4 &mpic 0x3 0x1>;
-
-		interrupt-parent = <&mpic>;
-		interrupts = <24 2>;
-		bus-range = <0 0>;
-		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x10000000
-			  0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>;
-		clock-frequency = <66666666>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe0008000 0x1000>;
-		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
-		device_type = "pci";
+			0xe000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+			0xe000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+			0xe000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+			0xe000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
 
 		pci_bridge@1c {
 			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 			interrupt-map = <
 
 				/* IDSEL 0x00 (PrPMC Site) */
-				0000 0x0 0x0 0x1 &mpic 0x0 0x1
-				0000 0x0 0x0 0x2 &mpic 0x1 0x1
-				0000 0x0 0x0 0x3 &mpic 0x2 0x1
-				0000 0x0 0x0 0x4 &mpic 0x3 0x1
+				0000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+				0000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+				0000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+				0000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
 
 				/* IDSEL 0x04 (VIA chip) */
-				0x2000 0x0 0x0 0x1 &mpic 0x0 0x1
-				0x2000 0x0 0x0 0x2 &mpic 0x1 0x1
-				0x2000 0x0 0x0 0x3 &mpic 0x2 0x1
-				0x2000 0x0 0x0 0x4 &mpic 0x3 0x1
+				0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+				0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+				0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+				0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
 
 				/* IDSEL 0x05 (8139) */
-				0x2800 0x0 0x0 0x1 &mpic 0x1 0x1
+				0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
 
 				/* IDSEL 0x06 (Slot 6) */
-				0x3000 0x0 0x0 0x1 &mpic 0x2 0x1
-				0x3000 0x0 0x0 0x2 &mpic 0x3 0x1
-				0x3000 0x0 0x0 0x3 &mpic 0x0 0x1
-				0x3000 0x0 0x0 0x4 &mpic 0x1 0x1
+				0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+				0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+				0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
+				0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
 
 				/* IDESL 0x07 (Slot 7) */
-				0x3800 0x0 0x0 0x1 &mpic 0x3 0x1
-				0x3800 0x0 0x0 0x2 &mpic 0x0 0x1
-				0x3800 0x0 0x0 0x3 &mpic 0x1 0x1
-				0x3800 0x0 0x0 0x4 &mpic 0x2 0x1>;
+				0x3800 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+				0x3800 0x0 0x0 0x2 &mpic 0x0 0x1 0 0
+				0x3800 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+				0x3800 0x0 0x0 0x4 &mpic 0x2 0x1 0 0>;
 
 			reg = <0xe000 0x0 0x0 0x0 0x0>;
 			#interrupt-cells = <1>;
@@ -492,7 +260,7 @@
 					#address-cells = <0>;
 					#interrupt-cells = <2>;
 					compatible = "chrp,iic";
-					interrupts = <0 1>;
+					interrupts = <0 1 0 0>;
 					interrupt-parent = <&mpic>;
 				};
 
@@ -505,56 +273,25 @@
 	};
 
 	pci1: pci@e0009000 {
+		reg = <0 0xe0009000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x90000000 0 0x90000000 0x0 0x10000000
+			  0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x800000>;
+		clock-frequency = <66666666>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
 			/* IDSEL 0x15 */
-			0xa800 0x0 0x0 0x1 &mpic 0xb 0x1
-			0xa800 0x0 0x0 0x2 &mpic 0x1 0x1
-			0xa800 0x0 0x0 0x3 &mpic 0x2 0x1
-			0xa800 0x0 0x0 0x4 &mpic 0x3 0x1>;
-
-		interrupt-parent = <&mpic>;
-		interrupts = <25 2>;
-		bus-range = <0 0>;
-		ranges = <0x2000000 0x0 0x90000000 0x90000000 0x0 0x10000000
-			  0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>;
-		clock-frequency = <66666666>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe0009000 0x1000>;
-		compatible = "fsl,mpc8540-pci";
-		device_type = "pci";
+			0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0
+			0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+			0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+			0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
 	};
 
 	pci2: pcie@e000a000 {
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-			/* IDSEL 0x0 (PEX) */
-			00000 0x0 0x0 0x1 &mpic 0x0 0x1
-			00000 0x0 0x0 0x2 &mpic 0x1 0x1
-			00000 0x0 0x0 0x3 &mpic 0x2 0x1
-			00000 0x0 0x0 0x4 &mpic 0x3 0x1>;
-
-		interrupt-parent = <&mpic>;
-		interrupts = <26 2>;
-		bus-range = <0 255>;
-		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>;
-		clock-frequency = <33333333>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe000a000 0x1000>;
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
+		reg = <0 0xe000a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xe3000000 0x0 0x100000>;
 		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
 			ranges = <0x2000000 0x0 0xa0000000
 				  0x2000000 0x0 0xa0000000
 				  0x0 0x20000000
@@ -565,3 +302,5 @@
 		};
 	};
 };
+
+/include/ "fsl/mpc8548si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts
index 5c5614f..fe10438 100644
--- a/arch/powerpc/boot/dts/mpc8555cds.dts
+++ b/arch/powerpc/boot/dts/mpc8555cds.dts
@@ -209,7 +209,7 @@
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x100>; 	// reg base, size
 			clock-frequency = <0>; 	// should we fill in in uboot?
 			interrupts = <42 2>;
@@ -219,7 +219,7 @@
 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4600 0x100>;	// reg base, size
 			clock-frequency = <0>; 	// should we fill in in uboot?
 			interrupts = <42 2>;
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index 647daf8..09598bb 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -9,60 +9,25 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "fsl/mpc8568si-pre.dtsi"
 
 / {
 	model = "MPC8568EMDS";
 	compatible = "MPC8568EMDS", "MPC85xxMDS";
-	#address-cells = <1>;
-	#size-cells = <1>;
 
 	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		ethernet2 = &enet2;
-		ethernet3 = &enet3;
-		serial0 = &serial0;
-		serial1 = &serial1;
 		pci0 = &pci0;
 		pci1 = &pci1;
-		rapidio0 = &rio0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8568@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <0x8000>;		// L1, 32K
-			i-cache-size = <0x8000>;		// L1, 32K
-			sleep = <&pmc 0x00008000	// core
-				 &pmc 0x00004000>;	// timebase
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-			next-level-cache = <&L2>;
-		};
+		rapidio0 = &rio;
 	};
 
 	memory {
 		device_type = "memory";
-		reg = <0x0 0x10000000>;
+		reg = <0x0 0x0 0x0 0x0>;
 	};
 
-	localbus@e0005000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8568-localbus", "fsl,pq3-localbus",
-			     "simple-bus";
-		reg = <0xe0005000 0x1000>;
-		interrupt-parent = <&mpic>;
-		interrupts = <19 2>;
-
+	lbc: localbus@e0005000 {
+		reg = <0x0 0xe0005000 0x0 0x1000>;
 		ranges = <0x0 0x0 0xfe000000 0x02000000
 			  0x1 0x0 0xf8000000 0x00008000
 			  0x2 0x0 0xf0000000 0x04000000
@@ -104,288 +69,65 @@
 		};
 	};
 
-	soc8568@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x0 0xe0000000 0x100000>;
-		bus-frequency = <0>;
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <10>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,mpc8568-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,mpc8568-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,mpc8568-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;	// 32 bytes
-			cache-size = <0x80000>;	// L2, 512K
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
+	soc: soc8568@e0000000 {
+		ranges = <0x0 0x0 0xe0000000 0x100000>;
 
 		i2c-sleep-nexus {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			sleep = <&pmc 0x00000004>;
-			ranges;
-
 			i2c@3000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				compatible = "fsl-i2c";
-				reg = <0x3000 0x100>;
-				interrupts = <43 2>;
-				interrupt-parent = <&mpic>;
-				dfsrr;
-
 				rtc@68 {
 					compatible = "dallas,ds1374";
 					reg = <0x68>;
-					interrupts = <3 1>;
-					interrupt-parent = <&mpic>;
+					interrupts = <3 1 0 0>;
 				};
 			};
+		};
 
-			i2c@3100 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <1>;
-				compatible = "fsl-i2c";
-				reg = <0x3100 0x100>;
-				interrupts = <43 2>;
-				interrupt-parent = <&mpic>;
-				dfsrr;
-			};
+		enet0: ethernet@24000 {
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy2>;
 		};
 
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8568-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			sleep = <&pmc 0x00000400>;
-
-			dma-channel@0 {
-				compatible = "fsl,mpc8568-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
+		mdio@24520 {
+			phy0: ethernet-phy@7 {
+				interrupts = <1 1 0 0>;
+				reg = <0x7>;
+				device_type = "ethernet-phy";
 			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8568-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
+			phy1: ethernet-phy@1 {
+				interrupts = <2 1 0 0>;
+				reg = <0x1>;
+				device_type = "ethernet-phy";
 			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8568-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
+			phy2: ethernet-phy@2 {
+				interrupts = <1 1 0 0>;
+				reg = <0x2>;
+				device_type = "ethernet-phy";
 			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8568-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
+			phy3: ethernet-phy@3 {
+				interrupts = <2 1 0 0>;
+				reg = <0x3>;
+				device_type = "ethernet-phy";
 			};
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
- 			interrupts = <29 2 30 2 34 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy2>;
-			sleep = <&pmc 0x00000080>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@7 {
-					interrupt-parent = <&mpic>;
-					interrupts = <1 1>;
-					reg = <0x7>;
-					device_type = "ethernet-phy";
-				};
-				phy1: ethernet-phy@1 {
-					interrupt-parent = <&mpic>;
-					interrupts = <2 1>;
-					reg = <0x1>;
-					device_type = "ethernet-phy";
-				};
-				phy2: ethernet-phy@2 {
-					interrupt-parent = <&mpic>;
-					interrupts = <1 1>;
-					reg = <0x2>;
-					device_type = "ethernet-phy";
-				};
-				phy3: ethernet-phy@3 {
-					interrupt-parent = <&mpic>;
-					interrupts = <2 1>;
-					reg = <0x3>;
-					device_type = "ethernet-phy";
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
 			};
 		};
 
 		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
- 			interrupts = <35 2 36 2 40 2>;
-			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi1>;
 			phy-handle = <&phy3>;
 			sleep = <&pmc 0x00000040>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
 		};
 
-		duart-sleep-nexus {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			sleep = <&pmc 0x00000002>;
-			ranges;
-
-			serial0: serial@4500 {
-				cell-index = <0>;
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0x4500 0x100>;
-				clock-frequency = <0>;
-				interrupts = <42 2>;
-				interrupt-parent = <&mpic>;
-			};
-
-			serial1: serial@4600 {
-				cell-index = <1>;
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0x4600 0x100>;
-				clock-frequency = <0>;
-				interrupts = <42 2>;
-				interrupt-parent = <&mpic>;
+		mdio@25520 {
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
 			};
 		};
 
-		global-utilities@e0000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8568-guts", "fsl,mpc8548-guts";
-			reg = <0xe0000 0x1000>;
-			ranges = <0 0xe0000 0x1000>;
-			fsl,has-rstcr;
-
-			pmc: power@70 {
-				compatible = "fsl,mpc8568-pmc",
-					     "fsl,mpc8548-pmc";
-				reg = <0x70 0x20>;
-			};
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec2.1", "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <45 2>;
-			interrupt-parent = <&mpic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0xfe>;
-			fsl,descriptor-types-mask = <0x12b0ebf>;
-			sleep = <&pmc 0x01000000>;
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-
-		msi@41600 {
-			compatible = "fsl,mpc8568-msi", "fsl,mpic-msi";
-			reg = <0x41600 0x80>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe0 0
-				0xe1 0
-				0xe2 0
-				0xe3 0
-				0xe4 0
-				0xe5 0
-				0xe6 0
-				0xe7 0>;
-			interrupt-parent = <&mpic>;
-		};
-
 		par_io@e0100 {
-			reg = <0xe0100 0x100>;
-			device_type = "par_io";
 			num-ports = <7>;
 
 			pio1: ucc_pin@01 {
@@ -448,57 +190,21 @@
 		};
 	};
 
-	qe@e0080000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "qe";
-		compatible = "fsl,qe";
-		ranges = <0x0 0xe0080000 0x40000>;
-		reg = <0xe0080000 0x480>;
-		sleep = <&pmc 0x00000800>;
-		brg-frequency = <0>;
-		bus-frequency = <396000000>;
-		fsl,qe-num-riscs = <2>;
-		fsl,qe-num-snums = <28>;
-
-		muram@10000 {
- 			#address-cells = <1>;
- 			#size-cells = <1>;
-			compatible = "fsl,qe-muram", "fsl,cpm-muram";
-			ranges = <0x0 0x10000 0x10000>;
-
-			data-only@0 {
-				compatible = "fsl,qe-muram-data",
-					     "fsl,cpm-muram-data";
-				reg = <0x0 0x10000>;
-			};
-		};
+	qe: qe@e0080000 {
+		ranges = <0x0 0x0 0xe0080000 0x40000>;
+		reg = <0x0 0xe0080000 0x0 0x480>;
 
 		spi@4c0 {
-			cell-index = <0>;
-			compatible = "fsl,spi";
-			reg = <0x4c0 0x40>;
-			interrupts = <2>;
-			interrupt-parent = <&qeic>;
 			mode = "cpu";
 		};
 
 		spi@500 {
-			cell-index = <1>;
-			compatible = "fsl,spi";
-			reg = <0x500 0x40>;
-			interrupts = <1>;
-			interrupt-parent = <&qeic>;
 			mode = "cpu";
 		};
 
 		enet2: ucc@2000 {
 			device_type = "network";
 			compatible = "ucc_geth";
-			cell-index = <1>;
-			reg = <0x2000 0x200>;
-			interrupts = <32>;
-			interrupt-parent = <&qeic>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			rx-clock-name = "none";
 			tx-clock-name = "clk16";
@@ -510,10 +216,6 @@
 		enet3: ucc@3000 {
 			device_type = "network";
 			compatible = "ucc_geth";
-			cell-index = <2>;
-			reg = <0x3000 0x200>;
-			interrupts = <33>;
-			interrupt-parent = <&qeic>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			rx-clock-name = "none";
 			tx-clock-name = "clk16";
@@ -532,102 +234,57 @@
 			 * gianfar's MDIO bus */
 			qe_phy0: ethernet-phy@07 {
 				interrupt-parent = <&mpic>;
-				interrupts = <1 1>;
+				interrupts = <1 1 0 0>;
 				reg = <0x7>;
 				device_type = "ethernet-phy";
 			};
 			qe_phy1: ethernet-phy@01 {
 				interrupt-parent = <&mpic>;
-				interrupts = <2 1>;
+				interrupts = <2 1 0 0>;
 				reg = <0x1>;
 				device_type = "ethernet-phy";
 			};
 			qe_phy2: ethernet-phy@02 {
 				interrupt-parent = <&mpic>;
-				interrupts = <1 1>;
+				interrupts = <1 1 0 0>;
 				reg = <0x2>;
 				device_type = "ethernet-phy";
 			};
 			qe_phy3: ethernet-phy@03 {
 				interrupt-parent = <&mpic>;
-				interrupts = <2 1>;
+				interrupts = <2 1 0 0>;
 				reg = <0x3>;
 				device_type = "ethernet-phy";
 			};
 		};
-
-		qeic: interrupt-controller@80 {
-			interrupt-controller;
-			compatible = "fsl,qe-ic";
-			#address-cells = <0>;
-			#interrupt-cells = <1>;
-			reg = <0x80 0x80>;
-			big-endian;
-			interrupts = <46 2 46 2>; //high:30 low:30
-			interrupt-parent = <&mpic>;
-		};
-
 	};
 
 	pci0: pci@e0008000 {
+		reg = <0x0 0xe0008000 0x0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0x0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0x0 0xe2000000 0x0 0x800000>;
+		clock-frequency = <66666666>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x12 AD18 */
-			0x9000 0x0 0x0 0x1 &mpic 0x5 0x1
-			0x9000 0x0 0x0 0x2 &mpic 0x6 0x1
-			0x9000 0x0 0x0 0x3 &mpic 0x7 0x1
-			0x9000 0x0 0x0 0x4 &mpic 0x4 0x1
+			0x9000 0x0 0x0 0x1 &mpic 0x5 0x1 0 0
+			0x9000 0x0 0x0 0x2 &mpic 0x6 0x1 0 0
+			0x9000 0x0 0x0 0x3 &mpic 0x7 0x1 0 0
+			0x9000 0x0 0x0 0x4 &mpic 0x4 0x1 0 0
 
 			/* IDSEL 0x13 AD19 */
-			0x9800 0x0 0x0 0x1 &mpic 0x6 0x1
-			0x9800 0x0 0x0 0x2 &mpic 0x7 0x1
-			0x9800 0x0 0x0 0x3 &mpic 0x4 0x1
-			0x9800 0x0 0x0 0x4 &mpic 0x5 0x1>;
-
-		interrupt-parent = <&mpic>;
-		interrupts = <24 2>;
-		bus-range = <0 255>;
-		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
-			  0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>;
-		sleep = <&pmc 0x80000000>;
-		clock-frequency = <66666666>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe0008000 0x1000>;
-		compatible = "fsl,mpc8540-pci";
-		device_type = "pci";
+			0x9800 0x0 0x0 0x1 &mpic 0x6 0x1 0 0
+			0x9800 0x0 0x0 0x2 &mpic 0x7 0x1 0 0
+			0x9800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+			0x9800 0x0 0x0 0x4 &mpic 0x5 0x1 0 0>;
 	};
 
 	/* PCI Express */
 	pci1: pcie@e000a000 {
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-			/* IDSEL 0x0 (PEX) */
-			00000 0x0 0x0 0x1 &mpic 0x0 0x1
-			00000 0x0 0x0 0x2 &mpic 0x1 0x1
-			00000 0x0 0x0 0x3 &mpic 0x2 0x1
-			00000 0x0 0x0 0x4 &mpic 0x3 0x1>;
-
-		interrupt-parent = <&mpic>;
-		interrupts = <26 2>;
-		bus-range = <0 255>;
-		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
-			  0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>;
-		sleep = <&pmc 0x20000000>;
-		clock-frequency = <33333333>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe000a000 0x1000>;
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
+		ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x10000000
+			  0x1000000 0x0 0x00000000 0x0 0xe2800000 0x0 0x800000>;
+		reg = <0x0 0xe000a000 0x0 0x1000>;
 		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
 			ranges = <0x2000000 0x0 0xa0000000
 				  0x2000000 0x0 0xa0000000
 				  0x0 0x10000000
@@ -638,22 +295,11 @@
 		};
 	};
 
-	rio0: rapidio@e00c00000 {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		compatible = "fsl,mpc8568-rapidio", "fsl,rapidio-delta";
-		reg = <0xe00c0000 0x20000>;
-		ranges = <0x0 0x0 0xc0000000 0x0 0x20000000>;
-		interrupts = <48 2 /* error     */
-			      49 2 /* bell_outb */
-			      50 2 /* bell_inb  */
-			      53 2 /* msg1_tx   */
-			      54 2 /* msg1_rx   */
-			      55 2 /* msg2_tx   */
-			      56 2 /* msg2_rx   */>;
-		interrupt-parent = <&mpic>;
-		sleep = <&pmc 0x00080000   /* controller */
-			 &pmc 0x00040000>; /* message unit */
+	rio: rapidio@e00c00000 {
+		reg = <0x0 0xe00c0000 0x0 0x20000>;
+		port1 {
+			ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>;
+		};
 	};
 
 	leds {
@@ -672,3 +318,5 @@
 		};
 	};
 };
+
+/include/ "fsl/mpc8568si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts
index 8b72eaf..7e283c8 100644
--- a/arch/powerpc/boot/dts/mpc8569mds.dts
+++ b/arch/powerpc/boot/dts/mpc8569mds.dts
@@ -9,66 +9,36 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "fsl/mpc8569si-pre.dtsi"
 
 / {
 	model = "MPC8569EMDS";
 	compatible = "fsl,MPC8569EMDS";
-	#address-cells = <1>;
-	#size-cells = <1>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
 
 	aliases {
-		serial0 = &serial0;
-		serial1 = &serial1;
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
 		ethernet2 = &enet2;
 		ethernet3 = &enet3;
 		ethernet5 = &enet5;
 		ethernet7 = &enet7;
-		pci1 = &pci1;
-		rapidio0 = &rio0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8569@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <0x8000>;		// L1, 32K
-			i-cache-size = <0x8000>;		// L1, 32K
-			sleep = <&pmc 0x00008000	// core
-				 &pmc 0x00004000>;	// timebase
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-			next-level-cache = <&L2>;
-		};
+		rapidio0 = &rio;
 	};
 
 	memory {
 		device_type = "memory";
 	};
 
-	localbus@e0005000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8569-elbc", "fsl,elbc", "simple-bus";
-		reg = <0xe0005000 0x1000>;
-		interrupts = <19 2>;
-		interrupt-parent = <&mpic>;
-		sleep = <&pmc 0x08000000>;
-
-		ranges = <0x0 0x0 0xfe000000 0x02000000
-			  0x1 0x0 0xf8000000 0x00008000
-			  0x2 0x0 0xf0000000 0x04000000
-			  0x3 0x0 0xfc000000 0x00008000
-			  0x4 0x0 0xf8008000 0x00008000
-			  0x5 0x0 0xf8010000 0x00008000>;
+	lbc: localbus@e0005000 {
+		reg = <0x0 0xe0005000 0x0 0x1000>;
+
+		ranges = <0x0 0x0 0x0 0xfe000000 0x02000000
+			  0x1 0x0 0x0 0xf8000000 0x00008000
+			  0x2 0x0 0x0 0xf0000000 0x04000000
+			  0x3 0x0 0x0 0xfc000000 0x00008000
+			  0x4 0x0 0x0 0xf8008000 0x00008000
+			  0x5 0x0 0x0 0xf8010000 0x00008000>;
 
 		nor@0,0 {
 			#address-cells = <1>;
@@ -133,220 +103,25 @@
 		};
 	};
 
-	soc@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "fsl,mpc8569-immr", "simple-bus";
-		ranges = <0x0 0xe0000000 0x100000>;
-		bus-frequency = <0>;
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <10>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,mpc8569-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,mpc8569-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
-		};
+	soc: soc@e0000000 {
+		ranges = <0x0 0x0 0xe0000000 0x100000>;
 
 		i2c-sleep-nexus {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			sleep = <&pmc 0x00000004>;
-			ranges;
-
 			i2c@3000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				compatible = "fsl-i2c";
-				reg = <0x3000 0x100>;
-				interrupts = <43 2>;
-				interrupt-parent = <&mpic>;
-				dfsrr;
-
 				rtc@68 {
 					compatible = "dallas,ds1374";
 					reg = <0x68>;
-					interrupts = <3 1>;
-					interrupt-parent = <&mpic>;
+					interrupts = <3 1 0 0>;
 				};
 			};
-
-			i2c@3100 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <1>;
-				compatible = "fsl-i2c";
-				reg = <0x3100 0x100>;
-				interrupts = <43 2>;
-				interrupt-parent = <&mpic>;
-				dfsrr;
-			};
-		};
-
-		duart-sleep-nexus {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			sleep = <&pmc 0x00000002>;
-			ranges;
-
-			serial0: serial@4500 {
-				cell-index = <0>;
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0x4500 0x100>;
-				clock-frequency = <0>;
-				interrupts = <42 2>;
-				interrupt-parent = <&mpic>;
-			};
-
-			serial1: serial@4600 {
-				cell-index = <1>;
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0x4600 0x100>;
-				clock-frequency = <0>;
-				interrupts = <42 2>;
-				interrupt-parent = <&mpic>;
-			};
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,mpc8569-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;	// 32 bytes
-			cache-size = <0x80000>;	// L2, 512K
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
 		};
 
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8569-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8569-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8569-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8569-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8569-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		sdhci@2e000 {
-			compatible = "fsl,mpc8569-esdhc", "fsl,esdhc";
-			reg = <0x2e000 0x1000>;
-			interrupts = <72 0x8>;
-			interrupt-parent = <&mpic>;
-			sleep = <&pmc 0x00200000>;
-			/* Filled in by U-Boot */
-			clock-frequency = <0>;
+		sdhc@2e000 {
 			status = "disabled";
 			sdhci,1-bit-only;
 		};
 
-		crypto@30000 {
-			compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
-				"fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <45 2 58 2>;
-			interrupt-parent = <&mpic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0xbfe>;
-			fsl,descriptor-types-mask = <0x3ab0ebf>;
-			sleep = <&pmc 0x01000000>;
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-
-		msi@41600 {
-			compatible = "fsl,mpc8568-msi", "fsl,mpic-msi";
-			reg = <0x41600 0x80>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe0 0
-				0xe1 0
-				0xe2 0
-				0xe3 0
-				0xe4 0
-				0xe5 0
-				0xe6 0
-				0xe7 0>;
-			interrupt-parent = <&mpic>;
-		};
-
-		global-utilities@e0000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8569-guts", "fsl,mpc8548-guts";
-			reg = <0xe0000 0x1000>;
-			ranges = <0 0xe0000 0x1000>;
-			fsl,has-rstcr;
-
-			pmc: power@70 {
-				compatible = "fsl,mpc8569-pmc",
-					     "fsl,mpc8548-pmc";
-				reg = <0x70 0x20>;
-			};
-		};
-
 		par_io@e0100 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0xe0100 0x100>;
-			ranges = <0x0 0xe0100 0x100>;
-			device_type = "par_io";
 			num-ports = <7>;
 
 			qe_pio_e: gpio-controller@80 {
@@ -447,47 +222,11 @@
 		};
 	};
 
-	qe@e0080000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "qe";
-		compatible = "fsl,qe";
-		ranges = <0x0 0xe0080000 0x40000>;
-		reg = <0xe0080000 0x480>;
-		sleep = <&pmc 0x00000800>;
-		brg-frequency = <0>;
-		bus-frequency = <0>;
-		fsl,qe-num-riscs = <4>;
-		fsl,qe-num-snums = <46>;
-
-		qeic: interrupt-controller@80 {
-			interrupt-controller;
-			compatible = "fsl,qe-ic";
-			#address-cells = <0>;
-			#interrupt-cells = <1>;
-			reg = <0x80 0x80>;
-			interrupts = <46 2 46 2>; //high:30 low:30
-			interrupt-parent = <&mpic>;
-		};
-
-		timer@440 {
-			compatible = "fsl,mpc8569-qe-gtm",
-				     "fsl,qe-gtm", "fsl,gtm";
-			reg = <0x440 0x40>;
-			interrupts = <12 13 14 15>;
-			interrupt-parent = <&qeic>;
-			/* Filled in by U-Boot */
-			clock-frequency = <0>;
-		};
+	qe: qe@e0080000 {
+		ranges = <0x0 0x0 0xe0080000 0x40000>;
+		reg = <0x0 0xe0080000 0x0 0x480>;
 
 		spi@4c0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc8569-qe-spi", "fsl,spi";
-			reg = <0x4c0 0x40>;
-			cell-index = <0>;
-			interrupts = <2>;
-			interrupt-parent = <&qeic>;
 			gpios = <&qe_pio_e 30 0>;
 			mode = "cpu-qe";
 
@@ -499,20 +238,10 @@
 		};
 
 		spi@500 {
-			cell-index = <1>;
-			compatible = "fsl,spi";
-			reg = <0x500 0x40>;
-			interrupts = <1>;
-			interrupt-parent = <&qeic>;
 			mode = "cpu";
 		};
 
 		usb@6c0 {
-			compatible = "fsl,mpc8569-qe-usb",
-				     "fsl,mpc8323-qe-usb";
-			reg = <0x6c0 0x40 0x8b00 0x100>;
-			interrupts = <11>;
-			interrupt-parent = <&qeic>;
 			fsl,fullspeed-clock = "clk5";
 			fsl,lowspeed-clock = "brg10";
 			gpios = <&qe_pio_f 3 0   /* USBOE */
@@ -527,10 +256,6 @@
 		enet0: ucc@2000 {
 			device_type = "network";
 			compatible = "ucc_geth";
-			cell-index = <1>;
-			reg = <0x2000 0x200>;
-			interrupts = <32>;
-			interrupt-parent = <&qeic>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			rx-clock-name = "none";
 			tx-clock-name = "clk12";
@@ -548,35 +273,33 @@
 
 			qe_phy0: ethernet-phy@07 {
 				interrupt-parent = <&mpic>;
-				interrupts = <1 1>;
+				interrupts = <1 1 0 0>;
 				reg = <0x7>;
 				device_type = "ethernet-phy";
 			};
 			qe_phy1: ethernet-phy@01 {
 				interrupt-parent = <&mpic>;
-				interrupts = <2 1>;
+				interrupts = <2 1 0 0>;
 				reg = <0x1>;
 				device_type = "ethernet-phy";
 			};
 			qe_phy2: ethernet-phy@02 {
 				interrupt-parent = <&mpic>;
-				interrupts = <3 1>;
+				interrupts = <3 1 0 0>;
 				reg = <0x2>;
 				device_type = "ethernet-phy";
 			};
 			qe_phy3: ethernet-phy@03 {
 				interrupt-parent = <&mpic>;
-				interrupts = <4 1>;
+				interrupts = <4 1 0 0>;
 				reg = <0x3>;
 				device_type = "ethernet-phy";
 			};
 			qe_phy5: ethernet-phy@04 {
-				interrupt-parent = <&mpic>;
 				reg = <0x04>;
 				device_type = "ethernet-phy";
 			};
 			qe_phy7: ethernet-phy@06 {
-				interrupt-parent = <&mpic>;
 				reg = <0x6>;
 				device_type = "ethernet-phy";
 			};
@@ -610,10 +333,6 @@
 		enet2: ucc@2200 {
 			device_type = "network";
 			compatible = "ucc_geth";
-			cell-index = <3>;
-			reg = <0x2200 0x200>;
-			interrupts = <34>;
-			interrupt-parent = <&qeic>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			rx-clock-name = "none";
 			tx-clock-name = "clk12";
@@ -637,10 +356,6 @@
 		enet1: ucc@3000 {
 			device_type = "network";
 			compatible = "ucc_geth";
-			cell-index = <2>;
-			reg = <0x3000 0x200>;
-			interrupts = <33>;
-			interrupt-parent = <&qeic>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			rx-clock-name = "none";
 			tx-clock-name = "clk17";
@@ -664,10 +379,6 @@
 		enet3: ucc@3200 {
 			device_type = "network";
 			compatible = "ucc_geth";
-			cell-index = <4>;
-			reg = <0x3200 0x200>;
-			interrupts = <35>;
-			interrupt-parent = <&qeic>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			rx-clock-name = "none";
 			tx-clock-name = "clk17";
@@ -691,10 +402,6 @@
 		enet5: ucc@3400 {
 			device_type = "network";
 			compatible = "ucc_geth";
-			cell-index = <6>;
-			reg = <0x3400 0x200>;
-			interrupts = <41>;
-			interrupt-parent = <&qeic>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			rx-clock-name = "none";
 			tx-clock-name = "none";
@@ -706,10 +413,6 @@
 		enet7: ucc@3600 {
 			device_type = "network";
 			compatible = "ucc_geth";
-			cell-index = <8>;
-			reg = <0x3600 0x200>;
-			interrupts = <43>;
-			interrupt-parent = <&qeic>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			rx-clock-name = "none";
 			tx-clock-name = "none";
@@ -717,50 +420,14 @@
 			phy-handle = <&qe_phy7>;
 			phy-connection-type = "sgmii";
 		};
-
-		muram@10000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,qe-muram", "fsl,cpm-muram";
-			ranges = <0x0 0x10000 0x20000>;
-
-			data-only@0 {
-				compatible = "fsl,qe-muram-data",
-					     "fsl,cpm-muram-data";
-				reg = <0x0 0x20000>;
-			};
-		};
-
 	};
 
 	/* PCI Express */
 	pci1: pcie@e000a000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe000a000 0x1000>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-			/* IDSEL 0x0 (PEX) */
-			00000 0x0 0x0 0x1 &mpic 0x0 0x1
-			00000 0x0 0x0 0x2 &mpic 0x1 0x1
-			00000 0x0 0x0 0x3 &mpic 0x2 0x1
-			00000 0x0 0x0 0x4 &mpic 0x3 0x1>;
-
-		interrupt-parent = <&mpic>;
-		interrupts = <26 2>;
-		bus-range = <0 255>;
-		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
-			  0x1000000 0x0 0x00000000 0xe2800000 0x0 0x00800000>;
-		sleep = <&pmc 0x20000000>;
-		clock-frequency = <33333333>;
+		reg = <0x0 0xe000a000 0x0 0x1000>;
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x10000000
+			  0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x00800000>;
 		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
 			ranges = <0x2000000 0x0 0xa0000000
 				  0x2000000 0x0 0xa0000000
 				  0x0 0x10000000
@@ -771,20 +438,15 @@
 		};
 	};
 
-	rio0: rapidio@e00c00000 {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		compatible = "fsl,mpc8569-rapidio", "fsl,rapidio-delta";
-		reg = <0xe00c0000 0x20000>;
-		ranges = <0x0 0x0 0xc0000000 0x0 0x20000000>;
-		interrupts = <48 2 /* error     */
-			      49 2 /* bell_outb */
-			      50 2 /* bell_inb  */
-			      53 2 /* msg1_tx   */
-			      54 2 /* msg1_rx   */
-			      55 2 /* msg2_tx   */
-			      56 2 /* msg2_rx   */>;
-		interrupt-parent = <&mpic>;
-		sleep = <&pmc 0x00080000>;
+	rio: rapidio@e00c00000 {
+		reg = <0x0 0xe00c0000 0x0 0x20000>;
+		port1 {
+			ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>;
+		};
+		port2 {
+			status = "disabled";
+		};
 	};
 };
+
+/include/ "fsl/mpc8569si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts
index f6c04d2..0c9f295 100644
--- a/arch/powerpc/boot/dts/mpc8572ds.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds.dts
@@ -9,67 +9,18 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "fsl/mpc8572si-pre.dtsi"
+
 / {
 	model = "fsl,MPC8572DS";
 	compatible = "fsl,MPC8572DS";
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		ethernet2 = &enet2;
-		ethernet3 = &enet3;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		pci2 = &pci2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8572@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <0x8000>;		// L1, 32K
-			i-cache-size = <0x8000>;		// L1, 32K
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-			next-level-cache = <&L2>;
-		};
-
-		PowerPC,8572@1 {
-			device_type = "cpu";
-			reg = <0x1>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <0x8000>;		// L1, 32K
-			i-cache-size = <0x8000>;		// L1, 32K
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-			next-level-cache = <&L2>;
-		};
-	};
 
 	memory {
 		device_type = "memory";
 	};
 
-	localbus@ffe05000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
+	board_lbc: lbc: localbus@ffe05000 {
 		reg = <0 0xffe05000 0 0x1000>;
-		interrupts = <19 2>;
-		interrupt-parent = <&mpic>;
 
 		ranges = <0x0 0x0 0x0 0xe8000000 0x08000000
 			  0x1 0x0 0x0 0xe0000000 0x08000000
@@ -78,601 +29,17 @@
 			  0x4 0x0 0x0 0xffa40000 0x00040000
 			  0x5 0x0 0x0 0xffa80000 0x00040000
 			  0x6 0x0 0x0 0xffac0000 0x00040000>;
-
-		nor@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x0 0x0 0x8000000>;
-			bank-width = <2>;
-			device-width = <1>;
-
-			ramdisk@0 {
-				reg = <0x0 0x03000000>;
-				read-only;
-			};
-
-			diagnostic@3000000 {
-				reg = <0x03000000 0x00e00000>;
-				read-only;
-			};
-
-			dink@3e00000 {
-				reg = <0x03e00000 0x00200000>;
-				read-only;
-			};
-
-			kernel@4000000 {
-				reg = <0x04000000 0x00400000>;
-				read-only;
-			};
-
-			jffs2@4400000 {
-				reg = <0x04400000 0x03b00000>;
-			};
-
-			dtb@7f00000 {
-				reg = <0x07f00000 0x00080000>;
-				read-only;
-			};
-
-			u-boot@7f80000 {
-				reg = <0x07f80000 0x00080000>;
-				read-only;
-			};
-		};
-
-		nand@2,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8572-fcm-nand",
-				     "fsl,elbc-fcm-nand";
-			reg = <0x2 0x0 0x40000>;
-
-			u-boot@0 {
-				reg = <0x0 0x02000000>;
-				read-only;
-			};
-
-			jffs2@2000000 {
-				reg = <0x02000000 0x10000000>;
-			};
-
-			ramdisk@12000000 {
-				reg = <0x12000000 0x08000000>;
-				read-only;
-			};
-
-			kernel@1a000000 {
-				reg = <0x1a000000 0x04000000>;
-			};
-
-			dtb@1e000000 {
-				reg = <0x1e000000 0x01000000>;
-				read-only;
-			};
-
-			empty@1f000000 {
-				reg = <0x1f000000 0x21000000>;
-			};
-		};
-
-		nand@4,0 {
-			compatible = "fsl,mpc8572-fcm-nand",
-				     "fsl,elbc-fcm-nand";
-			reg = <0x4 0x0 0x40000>;
-		};
-
-		nand@5,0 {
-			compatible = "fsl,mpc8572-fcm-nand",
-				     "fsl,elbc-fcm-nand";
-			reg = <0x5 0x0 0x40000>;
-		};
-
-		nand@6,0 {
-			compatible = "fsl,mpc8572-fcm-nand",
-				     "fsl,elbc-fcm-nand";
-			reg = <0x6 0x0 0x40000>;
-		};
 	};
 
-	soc8572@ffe00000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
+	board_soc: soc: soc8572@ffe00000 {
 		ranges = <0x0 0 0xffe00000 0x100000>;
-		bus-frequency = <0>;		// Filled out by uboot.
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <12>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,mpc8572-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,mpc8572-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
-		};
-
-		memory-controller@6000 {
-			compatible = "fsl,mpc8572-memory-controller";
-			reg = <0x6000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,mpc8572-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;	// 32 bytes
-			cache-size = <0x100000>; // L2, 1M
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		dma@c300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
-			reg = <0xc300 0x4>;
-			ranges = <0x0 0xc100 0x200>;
-			cell-index = <1>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <76 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <77 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <78 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <79 2>;
-			};
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		ptp_clock@24E00 {
-			compatible = "fsl,etsec-ptp";
-			reg = <0x24E00 0xB0>;
-			interrupts = <68 2 69 2 70 2 71 2>;
-			interrupt-parent = < &mpic >;
-			fsl,tclk-period = <5>;
-			fsl,tmr-prsc = <200>;
-			fsl,tmr-add = <0xAAAAAAAB>;
-			fsl,tmr-fiper1 = <0x3B9AC9FB>;
-			fsl,tmr-fiper2 = <0x3B9AC9FB>;
-			fsl,max-adj = <499999999>;
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30 2 34 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy0>;
-			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@0 {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 1>;
-					reg = <0x0>;
-				};
-				phy1: ethernet-phy@1 {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 1>;
-					reg = <0x1>;
-				};
-				phy2: ethernet-phy@2 {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 1>;
-					reg = <0x2>;
-				};
-				phy3: ethernet-phy@3 {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 1>;
-					reg = <0x3>;
-				};
-
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 2 36 2 40 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy1>;
-			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet2: ethernet@26000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <2>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x26000 0x1000>;
-			ranges = <0x0 0x26000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <31 2 32 2 33 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi2>;
-			phy-handle = <&phy2>;
-			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi2: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet3: ethernet@27000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <3>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x27000 0x1000>;
-			ranges = <0x0 0x27000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <37 2 38 2 39 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi3>;
-			phy-handle = <&phy3>;
-			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi3: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		global-utilities@e0000 {	//global utilities block
-			compatible = "fsl,mpc8572-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
-		};
-
-		msi@41600 {
-			compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
-			reg = <0x41600 0x80>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe0 0
-				0xe1 0
-				0xe2 0
-				0xe3 0
-				0xe4 0
-				0xe5 0
-				0xe6 0
-				0xe7 0>;
-			interrupt-parent = <&mpic>;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
-				     "fsl,sec2.1", "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <45 2 58 2>;
-			interrupt-parent = <&mpic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0x9fe>;
-			fsl,descriptor-types-mask = <0x3ab0ebf>;
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
 	};
 
-	pci0: pcie@ffe08000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
+	board_pci0: pci0: pcie@ffe08000 {
 		reg = <0 0xffe08000 0 0x1000>;
-		bus-range = <0 255>;
 		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x00010000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <24 2>;
-		interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
-		interrupt-map = <
-			/* IDSEL 0x11 func 0 - PCI slot 1 */
-			0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
-			0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
-			0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
-			0x8800 0x0 0x0 0x4 &mpic 0x1 0x1
-
-			/* IDSEL 0x11 func 1 - PCI slot 1 */
-			0x8900 0x0 0x0 0x1 &mpic 0x2 0x1
-			0x8900 0x0 0x0 0x2 &mpic 0x3 0x1
-			0x8900 0x0 0x0 0x3 &mpic 0x4 0x1
-			0x8900 0x0 0x0 0x4 &mpic 0x1 0x1
-
-			/* IDSEL 0x11 func 2 - PCI slot 1 */
-			0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1
-			0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1
-			0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1
-			0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1
-
-			/* IDSEL 0x11 func 3 - PCI slot 1 */
-			0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1
-			0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1
-			0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1
-			0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1
-
-			/* IDSEL 0x11 func 4 - PCI slot 1 */
-			0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1
-			0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1
-			0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1
-			0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1
-
-			/* IDSEL 0x11 func 5 - PCI slot 1 */
-			0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1
-			0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1
-			0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1
-			0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1
-
-			/* IDSEL 0x11 func 6 - PCI slot 1 */
-			0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1
-			0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1
-			0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1
-			0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1
-
-			/* IDSEL 0x11 func 7 - PCI slot 1 */
-			0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1
-			0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1
-			0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1
-			0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1
-
-			/* IDSEL 0x12 func 0 - PCI slot 2 */
-			0x9000 0x0 0x0 0x1 &mpic 0x3 0x1
-			0x9000 0x0 0x0 0x2 &mpic 0x4 0x1
-			0x9000 0x0 0x0 0x3 &mpic 0x1 0x1
-			0x9000 0x0 0x0 0x4 &mpic 0x2 0x1
-
-			/* IDSEL 0x12 func 1 - PCI slot 2 */
-			0x9100 0x0 0x0 0x1 &mpic 0x3 0x1
-			0x9100 0x0 0x0 0x2 &mpic 0x4 0x1
-			0x9100 0x0 0x0 0x3 &mpic 0x1 0x1
-			0x9100 0x0 0x0 0x4 &mpic 0x2 0x1
-
-			/* IDSEL 0x12 func 2 - PCI slot 2 */
-			0x9200 0x0 0x0 0x1 &mpic 0x3 0x1
-			0x9200 0x0 0x0 0x2 &mpic 0x4 0x1
-			0x9200 0x0 0x0 0x3 &mpic 0x1 0x1
-			0x9200 0x0 0x0 0x4 &mpic 0x2 0x1
-
-			/* IDSEL 0x12 func 3 - PCI slot 2 */
-			0x9300 0x0 0x0 0x1 &mpic 0x3 0x1
-			0x9300 0x0 0x0 0x2 &mpic 0x4 0x1
-			0x9300 0x0 0x0 0x3 &mpic 0x1 0x1
-			0x9300 0x0 0x0 0x4 &mpic 0x2 0x1
-
-			/* IDSEL 0x12 func 4 - PCI slot 2 */
-			0x9400 0x0 0x0 0x1 &mpic 0x3 0x1
-			0x9400 0x0 0x0 0x2 &mpic 0x4 0x1
-			0x9400 0x0 0x0 0x3 &mpic 0x1 0x1
-			0x9400 0x0 0x0 0x4 &mpic 0x2 0x1
-
-			/* IDSEL 0x12 func 5 - PCI slot 2 */
-			0x9500 0x0 0x0 0x1 &mpic 0x3 0x1
-			0x9500 0x0 0x0 0x2 &mpic 0x4 0x1
-			0x9500 0x0 0x0 0x3 &mpic 0x1 0x1
-			0x9500 0x0 0x0 0x4 &mpic 0x2 0x1
-
-			/* IDSEL 0x12 func 6 - PCI slot 2 */
-			0x9600 0x0 0x0 0x1 &mpic 0x3 0x1
-			0x9600 0x0 0x0 0x2 &mpic 0x4 0x1
-			0x9600 0x0 0x0 0x3 &mpic 0x1 0x1
-			0x9600 0x0 0x0 0x4 &mpic 0x2 0x1
-
-			/* IDSEL 0x12 func 7 - PCI slot 2 */
-			0x9700 0x0 0x0 0x1 &mpic 0x3 0x1
-			0x9700 0x0 0x0 0x2 &mpic 0x4 0x1
-			0x9700 0x0 0x0 0x3 &mpic 0x1 0x1
-			0x9700 0x0 0x0 0x4 &mpic 0x2 0x1
-
-			// IDSEL 0x1c  USB
-			0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
-			0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
-			0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
-			0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
-
-			// IDSEL 0x1d  Audio
-			0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
-
-			// IDSEL 0x1e Legacy
-			0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
-			0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
-
-			// IDSEL 0x1f IDE/SATA
-			0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
-			0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
-
-			>;
-
 		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
 			ranges = <0x2000000 0x0 0x80000000
 				  0x2000000 0x0 0x80000000
 				  0x0 0x20000000
@@ -680,99 +47,14 @@
 				  0x1000000 0x0 0x0
 				  0x1000000 0x0 0x0
 				  0x0 0x10000>;
-			uli1575@0 {
-				reg = <0x0 0x0 0x0 0x0 0x0>;
-				#size-cells = <2>;
-				#address-cells = <3>;
-				ranges = <0x2000000 0x0 0x80000000
-					  0x2000000 0x0 0x80000000
-					  0x0 0x20000000
-
-					  0x1000000 0x0 0x0
-					  0x1000000 0x0 0x0
-					  0x0 0x10000>;
-				isa@1e {
-					device_type = "isa";
-					#interrupt-cells = <2>;
-					#size-cells = <1>;
-					#address-cells = <2>;
-					reg = <0xf000 0x0 0x0 0x0 0x0>;
-					ranges = <0x1 0x0 0x1000000 0x0 0x0
-						  0x1000>;
-					interrupt-parent = <&i8259>;
-
-					i8259: interrupt-controller@20 {
-						reg = <0x1 0x20 0x2
-						       0x1 0xa0 0x2
-						       0x1 0x4d0 0x2>;
-						interrupt-controller;
-						device_type = "interrupt-controller";
-						#address-cells = <0>;
-						#interrupt-cells = <2>;
-						compatible = "chrp,iic";
-						interrupts = <9 2>;
-						interrupt-parent = <&mpic>;
-					};
-
-					i8042@60 {
-						#size-cells = <0>;
-						#address-cells = <1>;
-						reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
-						interrupts = <1 3 12 3>;
-						interrupt-parent =
-							<&i8259>;
-
-						keyboard@0 {
-							reg = <0x0>;
-							compatible = "pnpPNP,303";
-						};
-
-						mouse@1 {
-							reg = <0x1>;
-							compatible = "pnpPNP,f03";
-						};
-					};
-
-					rtc@70 {
-						compatible = "pnpPNP,b00";
-						reg = <0x1 0x70 0x2>;
-					};
-
-					gpio@400 {
-						reg = <0x1 0x400 0x80>;
-					};
-				};
-			};
 		};
-
 	};
 
 	pci1: pcie@ffe09000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
 		reg = <0 0xffe09000 0 0x1000>;
-		bus-range = <0 255>;
 		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x00010000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <25 2>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x4 0x1
-			0000 0x0 0x0 0x2 &mpic 0x5 0x1
-			0000 0x0 0x0 0x3 &mpic 0x6 0x1
-			0000 0x0 0x0 0x4 &mpic 0x7 0x1
-			>;
 		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
 			ranges = <0x2000000 0x0 0xa0000000
 				  0x2000000 0x0 0xa0000000
 				  0x0 0x20000000
@@ -784,31 +66,10 @@
 	};
 
 	pci2: pcie@ffe0a000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
 		reg = <0 0xffe0a000 0 0x1000>;
-		bus-range = <0 255>;
 		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x00010000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <26 2>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x0 0x1
-			0000 0x0 0x0 0x2 &mpic 0x1 0x1
-			0000 0x0 0x0 0x3 &mpic 0x2 0x1
-			0000 0x0 0x0 0x4 &mpic 0x3 0x1
-			>;
 		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
 			ranges = <0x2000000 0x0 0xc0000000
 				  0x2000000 0x0 0xc0000000
 				  0x0 0x20000000
@@ -819,3 +80,11 @@
 		};
 	};
 };
+
+/*
+ * mpc8572ds.dtsi must be last to ensure board_pci0 overrides pci0 settings
+ * for interrupt-map & interrupt-map-mask
+ */
+
+/include/ "fsl/mpc8572si-post.dtsi"
+/include/ "mpc8572ds.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dtsi b/arch/powerpc/boot/dts/mpc8572ds.dtsi
new file mode 100644
index 0000000..c3d4fac
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8572ds.dtsi
@@ -0,0 +1,397 @@
+/*
+ * MPC8572DS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		ramdisk@0 {
+			reg = <0x0 0x03000000>;
+			read-only;
+		};
+
+		diagnostic@3000000 {
+			reg = <0x03000000 0x00e00000>;
+			read-only;
+		};
+
+		dink@3e00000 {
+			reg = <0x03e00000 0x00200000>;
+			read-only;
+		};
+
+		kernel@4000000 {
+			reg = <0x04000000 0x00400000>;
+			read-only;
+		};
+
+		jffs2@4400000 {
+			reg = <0x04400000 0x03b00000>;
+		};
+
+		dtb@7f00000 {
+			reg = <0x07f00000 0x00080000>;
+			read-only;
+		};
+
+		u-boot@7f80000 {
+			reg = <0x07f80000 0x00080000>;
+			read-only;
+		};
+	};
+
+	nand@2,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8572-fcm-nand",
+			     "fsl,elbc-fcm-nand";
+		reg = <0x2 0x0 0x40000>;
+
+		u-boot@0 {
+			reg = <0x0 0x02000000>;
+			read-only;
+		};
+
+		jffs2@2000000 {
+			reg = <0x02000000 0x10000000>;
+		};
+
+		ramdisk@12000000 {
+			reg = <0x12000000 0x08000000>;
+			read-only;
+		};
+
+		kernel@1a000000 {
+			reg = <0x1a000000 0x04000000>;
+		};
+
+		dtb@1e000000 {
+			reg = <0x1e000000 0x01000000>;
+			read-only;
+		};
+
+		empty@1f000000 {
+			reg = <0x1f000000 0x21000000>;
+		};
+	};
+
+	nand@4,0 {
+		compatible = "fsl,mpc8572-fcm-nand",
+			     "fsl,elbc-fcm-nand";
+		reg = <0x4 0x0 0x40000>;
+	};
+
+	nand@5,0 {
+		compatible = "fsl,mpc8572-fcm-nand",
+			     "fsl,elbc-fcm-nand";
+		reg = <0x5 0x0 0x40000>;
+	};
+
+	nand@6,0 {
+		compatible = "fsl,mpc8572-fcm-nand",
+			     "fsl,elbc-fcm-nand";
+		reg = <0x6 0x0 0x40000>;
+	};
+};
+
+&board_soc {
+	enet0: ethernet@24000 {
+		tbi-handle = <&tbi0>;
+		phy-handle = <&phy0>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	mdio@24520 {
+		phy0: ethernet-phy@0 {
+			interrupts = <10 1 0 0>;
+			reg = <0x0>;
+		};
+		phy1: ethernet-phy@1 {
+			interrupts = <10 1 0 0>;
+			reg = <0x1>;
+		};
+		phy2: ethernet-phy@2 {
+			interrupts = <10 1 0 0>;
+			reg = <0x2>;
+		};
+		phy3: ethernet-phy@3 {
+			interrupts = <10 1 0 0>;
+			reg = <0x3>;
+		};
+
+		tbi0: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	ptp_clock@24e00 {
+		fsl,tclk-period = <5>;
+		fsl,tmr-prsc = <200>;
+		fsl,tmr-add = <0xAAAAAAAB>;
+		fsl,tmr-fiper1 = <0x3B9AC9FB>;
+		fsl,tmr-fiper2 = <0x3B9AC9FB>;
+		fsl,max-adj = <499999999>;
+	};
+
+	enet1: ethernet@25000 {
+		tbi-handle = <&tbi1>;
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+
+	};
+
+	mdio@25520 {
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet2: ethernet@26000 {
+		tbi-handle = <&tbi2>;
+		phy-handle = <&phy2>;
+		phy-connection-type = "rgmii-id";
+
+	};
+	mdio@26520 {
+		tbi2: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet3: ethernet@27000 {
+		tbi-handle = <&tbi3>;
+		phy-handle = <&phy3>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	mdio@27520 {
+		tbi3: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+};
+
+&board_pci0 {
+	pcie@0 {
+		interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x11 func 0 - PCI slot 1 */
+			0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+			0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+			0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+			0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+			/* IDSEL 0x11 func 1 - PCI slot 1 */
+			0x8900 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+			0x8900 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+			0x8900 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+			0x8900 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+			/* IDSEL 0x11 func 2 - PCI slot 1 */
+			0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+			0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+			0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+			0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+			/* IDSEL 0x11 func 3 - PCI slot 1 */
+			0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+			0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+			0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+			0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+			/* IDSEL 0x11 func 4 - PCI slot 1 */
+			0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+			0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+			0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+			0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+			/* IDSEL 0x11 func 5 - PCI slot 1 */
+			0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+			0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+			0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+			0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+			/* IDSEL 0x11 func 6 - PCI slot 1 */
+			0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+			0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+			0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+			0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+			/* IDSEL 0x11 func 7 - PCI slot 1 */
+			0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+			0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+			0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+			0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+			/* IDSEL 0x12 func 0 - PCI slot 2 */
+			0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+			0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+			0x9000 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+			0x9000 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+			/* IDSEL 0x12 func 1 - PCI slot 2 */
+			0x9100 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+			0x9100 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+			0x9100 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+			0x9100 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+			/* IDSEL 0x12 func 2 - PCI slot 2 */
+			0x9200 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+			0x9200 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+			0x9200 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+			0x9200 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+			/* IDSEL 0x12 func 3 - PCI slot 2 */
+			0x9300 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+			0x9300 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+			0x9300 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+			0x9300 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+			/* IDSEL 0x12 func 4 - PCI slot 2 */
+			0x9400 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+			0x9400 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+			0x9400 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+			0x9400 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+			/* IDSEL 0x12 func 5 - PCI slot 2 */
+			0x9500 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+			0x9500 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+			0x9500 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+			0x9500 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+			/* IDSEL 0x12 func 6 - PCI slot 2 */
+			0x9600 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+			0x9600 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+			0x9600 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+			0x9600 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+			/* IDSEL 0x12 func 7 - PCI slot 2 */
+			0x9700 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+			0x9700 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+			0x9700 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+			0x9700 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+			// IDSEL 0x1c  USB
+			0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
+			0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
+			0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
+			0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
+
+			// IDSEL 0x1d  Audio
+			0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
+
+			// IDSEL 0x1e Legacy
+			0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
+			0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
+
+			// IDSEL 0x1f IDE/SATA
+			0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
+			0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
+			>;
+
+
+		uli1575@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+			isa@1e {
+				device_type = "isa";
+				#interrupt-cells = <2>;
+				#size-cells = <1>;
+				#address-cells = <2>;
+				reg = <0xf000 0x0 0x0 0x0 0x0>;
+				ranges = <0x1 0x0 0x1000000 0x0 0x0
+					  0x1000>;
+				interrupt-parent = <&i8259>;
+
+				i8259: interrupt-controller@20 {
+					reg = <0x1 0x20 0x2
+					       0x1 0xa0 0x2
+					       0x1 0x4d0 0x2>;
+					interrupt-controller;
+					device_type = "interrupt-controller";
+					#address-cells = <0>;
+					#interrupt-cells = <2>;
+					compatible = "chrp,iic";
+					interrupts = <9 2 0 0>;
+					interrupt-parent = <&mpic>;
+				};
+
+				i8042@60 {
+					#size-cells = <0>;
+					#address-cells = <1>;
+					reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
+					interrupts = <1 3 12 3>;
+					interrupt-parent =
+						<&i8259>;
+
+					keyboard@0 {
+						reg = <0x0>;
+						compatible = "pnpPNP,303";
+					};
+
+					mouse@1 {
+						reg = <0x1>;
+						compatible = "pnpPNP,f03";
+					};
+				};
+
+				rtc@70 {
+					compatible = "pnpPNP,b00";
+					reg = <0x1 0x70 0x2>;
+				};
+
+				gpio@400 {
+					reg = <0x1 0x400 0x80>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc8572ds_36b.dts b/arch/powerpc/boot/dts/mpc8572ds_36b.dts
index f6365db..6c3d0b3 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_36b.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_36b.dts
@@ -1,5 +1,5 @@
 /*
- * MPC8572 DS Device Tree Source
+ * MPC8572DS Device Tree Source (36-bit address map)
  *
  * Copyright 2007-2009 Freescale Semiconductor Inc.
  *
@@ -9,67 +9,18 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "fsl/mpc8572si-pre.dtsi"
+
 / {
 	model = "fsl,MPC8572DS";
 	compatible = "fsl,MPC8572DS";
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		ethernet2 = &enet2;
-		ethernet3 = &enet3;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		pci2 = &pci2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8572@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <0x8000>;		// L1, 32K
-			i-cache-size = <0x8000>;		// L1, 32K
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-			next-level-cache = <&L2>;
-		};
-
-		PowerPC,8572@1 {
-			device_type = "cpu";
-			reg = <0x1>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <0x8000>;		// L1, 32K
-			i-cache-size = <0x8000>;		// L1, 32K
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-			next-level-cache = <&L2>;
-		};
-	};
 
 	memory {
 		device_type = "memory";
 	};
 
-	localbus@fffe05000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
+	board_lbc: lbc: localbus@fffe05000 {
 		reg = <0xf 0xffe05000 0 0x1000>;
-		interrupts = <19 2>;
-		interrupt-parent = <&mpic>;
 
 		ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
 			  0x1 0x0 0xf 0xe0000000 0x08000000
@@ -78,588 +29,17 @@
 			  0x4 0x0 0xf 0xffa40000 0x00040000
 			  0x5 0x0 0xf 0xffa80000 0x00040000
 			  0x6 0x0 0xf 0xffac0000 0x00040000>;
-
-		nor@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x0 0x0 0x8000000>;
-			bank-width = <2>;
-			device-width = <1>;
-
-			ramdisk@0 {
-				reg = <0x0 0x03000000>;
-				read-only;
-			};
-
-			diagnostic@3000000 {
-				reg = <0x03000000 0x00e00000>;
-				read-only;
-			};
-
-			dink@3e00000 {
-				reg = <0x03e00000 0x00200000>;
-				read-only;
-			};
-
-			kernel@4000000 {
-				reg = <0x04000000 0x00400000>;
-				read-only;
-			};
-
-			jffs2@4400000 {
-				reg = <0x04400000 0x03b00000>;
-			};
-
-			dtb@7f00000 {
-				reg = <0x07f00000 0x00080000>;
-				read-only;
-			};
-
-			u-boot@7f80000 {
-				reg = <0x07f80000 0x00080000>;
-				read-only;
-			};
-		};
-
-		nand@2,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8572-fcm-nand",
-				     "fsl,elbc-fcm-nand";
-			reg = <0x2 0x0 0x40000>;
-
-			u-boot@0 {
-				reg = <0x0 0x02000000>;
-				read-only;
-			};
-
-			jffs2@2000000 {
-				reg = <0x02000000 0x10000000>;
-			};
-
-			ramdisk@12000000 {
-				reg = <0x12000000 0x08000000>;
-				read-only;
-			};
-
-			kernel@1a000000 {
-				reg = <0x1a000000 0x04000000>;
-			};
-
-			dtb@1e000000 {
-				reg = <0x1e000000 0x01000000>;
-				read-only;
-			};
-
-			empty@1f000000 {
-				reg = <0x1f000000 0x21000000>;
-			};
-		};
-
-		nand@4,0 {
-			compatible = "fsl,mpc8572-fcm-nand",
-				     "fsl,elbc-fcm-nand";
-			reg = <0x4 0x0 0x40000>;
-		};
-
-		nand@5,0 {
-			compatible = "fsl,mpc8572-fcm-nand",
-				     "fsl,elbc-fcm-nand";
-			reg = <0x5 0x0 0x40000>;
-		};
-
-		nand@6,0 {
-			compatible = "fsl,mpc8572-fcm-nand",
-				     "fsl,elbc-fcm-nand";
-			reg = <0x6 0x0 0x40000>;
-		};
 	};
 
-	soc8572@fffe00000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
+	board_soc: soc: soc8572@fffe00000 {
 		ranges = <0x0 0xf 0xffe00000 0x100000>;
-		bus-frequency = <0>;		// Filled out by uboot.
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <12>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,mpc8572-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,mpc8572-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
-		};
-
-		memory-controller@6000 {
-			compatible = "fsl,mpc8572-memory-controller";
-			reg = <0x6000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,mpc8572-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;	// 32 bytes
-			cache-size = <0x100000>; // L2, 1M
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		dma@c300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
-			reg = <0xc300 0x4>;
-			ranges = <0x0 0xc100 0x200>;
-			cell-index = <1>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <76 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <77 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <78 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <79 2>;
-			};
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30 2 34 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy0>;
-			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@0 {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 1>;
-					reg = <0x0>;
-				};
-				phy1: ethernet-phy@1 {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 1>;
-					reg = <0x1>;
-				};
-				phy2: ethernet-phy@2 {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 1>;
-					reg = <0x2>;
-				};
-				phy3: ethernet-phy@3 {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 1>;
-					reg = <0x3>;
-				};
-
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 2 36 2 40 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy1>;
-			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet2: ethernet@26000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <2>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x26000 0x1000>;
-			ranges = <0x0 0x26000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <31 2 32 2 33 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi2>;
-			phy-handle = <&phy2>;
-			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi2: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet3: ethernet@27000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <3>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x27000 0x1000>;
-			ranges = <0x0 0x27000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <37 2 38 2 39 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi3>;
-			phy-handle = <&phy3>;
-			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi3: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		global-utilities@e0000 {	//global utilities block
-			compatible = "fsl,mpc8572-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
-		};
-
-		msi@41600 {
-			compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
-			reg = <0x41600 0x80>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe0 0
-				0xe1 0
-				0xe2 0
-				0xe3 0
-				0xe4 0
-				0xe5 0
-				0xe6 0
-				0xe7 0>;
-			interrupt-parent = <&mpic>;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
-				     "fsl,sec2.1", "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <45 2 58 2>;
-			interrupt-parent = <&mpic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0x9fe>;
-			fsl,descriptor-types-mask = <0x3ab0ebf>;
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
 	};
 
-	pci0: pcie@fffe08000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
+	board_pci0: pci0: pcie@fffe08000 {
 		reg = <0xf 0xffe08000 0 0x1000>;
-		bus-range = <0 255>;
 		ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x00010000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <24 2>;
-		interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
-		interrupt-map = <
-			/* IDSEL 0x11 func 0 - PCI slot 1 */
-			0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
-			0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
-			0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
-			0x8800 0x0 0x0 0x4 &mpic 0x1 0x1
-
-			/* IDSEL 0x11 func 1 - PCI slot 1 */
-			0x8900 0x0 0x0 0x1 &mpic 0x2 0x1
-			0x8900 0x0 0x0 0x2 &mpic 0x3 0x1
-			0x8900 0x0 0x0 0x3 &mpic 0x4 0x1
-			0x8900 0x0 0x0 0x4 &mpic 0x1 0x1
-
-			/* IDSEL 0x11 func 2 - PCI slot 1 */
-			0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1
-			0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1
-			0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1
-			0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1
-
-			/* IDSEL 0x11 func 3 - PCI slot 1 */
-			0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1
-			0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1
-			0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1
-			0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1
-
-			/* IDSEL 0x11 func 4 - PCI slot 1 */
-			0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1
-			0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1
-			0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1
-			0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1
-
-			/* IDSEL 0x11 func 5 - PCI slot 1 */
-			0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1
-			0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1
-			0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1
-			0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1
-
-			/* IDSEL 0x11 func 6 - PCI slot 1 */
-			0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1
-			0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1
-			0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1
-			0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1
-
-			/* IDSEL 0x11 func 7 - PCI slot 1 */
-			0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1
-			0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1
-			0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1
-			0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1
-
-			/* IDSEL 0x12 func 0 - PCI slot 2 */
-			0x9000 0x0 0x0 0x1 &mpic 0x3 0x1
-			0x9000 0x0 0x0 0x2 &mpic 0x4 0x1
-			0x9000 0x0 0x0 0x3 &mpic 0x1 0x1
-			0x9000 0x0 0x0 0x4 &mpic 0x2 0x1
-
-			/* IDSEL 0x12 func 1 - PCI slot 2 */
-			0x9100 0x0 0x0 0x1 &mpic 0x3 0x1
-			0x9100 0x0 0x0 0x2 &mpic 0x4 0x1
-			0x9100 0x0 0x0 0x3 &mpic 0x1 0x1
-			0x9100 0x0 0x0 0x4 &mpic 0x2 0x1
-
-			/* IDSEL 0x12 func 2 - PCI slot 2 */
-			0x9200 0x0 0x0 0x1 &mpic 0x3 0x1
-			0x9200 0x0 0x0 0x2 &mpic 0x4 0x1
-			0x9200 0x0 0x0 0x3 &mpic 0x1 0x1
-			0x9200 0x0 0x0 0x4 &mpic 0x2 0x1
-
-			/* IDSEL 0x12 func 3 - PCI slot 2 */
-			0x9300 0x0 0x0 0x1 &mpic 0x3 0x1
-			0x9300 0x0 0x0 0x2 &mpic 0x4 0x1
-			0x9300 0x0 0x0 0x3 &mpic 0x1 0x1
-			0x9300 0x0 0x0 0x4 &mpic 0x2 0x1
-
-			/* IDSEL 0x12 func 4 - PCI slot 2 */
-			0x9400 0x0 0x0 0x1 &mpic 0x3 0x1
-			0x9400 0x0 0x0 0x2 &mpic 0x4 0x1
-			0x9400 0x0 0x0 0x3 &mpic 0x1 0x1
-			0x9400 0x0 0x0 0x4 &mpic 0x2 0x1
-
-			/* IDSEL 0x12 func 5 - PCI slot 2 */
-			0x9500 0x0 0x0 0x1 &mpic 0x3 0x1
-			0x9500 0x0 0x0 0x2 &mpic 0x4 0x1
-			0x9500 0x0 0x0 0x3 &mpic 0x1 0x1
-			0x9500 0x0 0x0 0x4 &mpic 0x2 0x1
-
-			/* IDSEL 0x12 func 6 - PCI slot 2 */
-			0x9600 0x0 0x0 0x1 &mpic 0x3 0x1
-			0x9600 0x0 0x0 0x2 &mpic 0x4 0x1
-			0x9600 0x0 0x0 0x3 &mpic 0x1 0x1
-			0x9600 0x0 0x0 0x4 &mpic 0x2 0x1
-
-			/* IDSEL 0x12 func 7 - PCI slot 2 */
-			0x9700 0x0 0x0 0x1 &mpic 0x3 0x1
-			0x9700 0x0 0x0 0x2 &mpic 0x4 0x1
-			0x9700 0x0 0x0 0x3 &mpic 0x1 0x1
-			0x9700 0x0 0x0 0x4 &mpic 0x2 0x1
-
-			// IDSEL 0x1c  USB
-			0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
-			0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
-			0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
-			0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
-
-			// IDSEL 0x1d  Audio
-			0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
-
-			// IDSEL 0x1e Legacy
-			0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
-			0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
-
-			// IDSEL 0x1f IDE/SATA
-			0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
-			0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
-
-			>;
-
 		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
 			ranges = <0x2000000 0x0 0xe0000000
 				  0x2000000 0x0 0xe0000000
 				  0x0 0x20000000
@@ -667,99 +47,14 @@
 				  0x1000000 0x0 0x0
 				  0x1000000 0x0 0x0
 				  0x0 0x10000>;
-			uli1575@0 {
-				reg = <0x0 0x0 0x0 0x0 0x0>;
-				#size-cells = <2>;
-				#address-cells = <3>;
-				ranges = <0x2000000 0x0 0xe0000000
-					  0x2000000 0x0 0xe0000000
-					  0x0 0x20000000
-
-					  0x1000000 0x0 0x0
-					  0x1000000 0x0 0x0
-					  0x0 0x10000>;
-				isa@1e {
-					device_type = "isa";
-					#interrupt-cells = <2>;
-					#size-cells = <1>;
-					#address-cells = <2>;
-					reg = <0xf000 0x0 0x0 0x0 0x0>;
-					ranges = <0x1 0x0 0x1000000 0x0 0x0
-						  0x1000>;
-					interrupt-parent = <&i8259>;
-
-					i8259: interrupt-controller@20 {
-						reg = <0x1 0x20 0x2
-						       0x1 0xa0 0x2
-						       0x1 0x4d0 0x2>;
-						interrupt-controller;
-						device_type = "interrupt-controller";
-						#address-cells = <0>;
-						#interrupt-cells = <2>;
-						compatible = "chrp,iic";
-						interrupts = <9 2>;
-						interrupt-parent = <&mpic>;
-					};
-
-					i8042@60 {
-						#size-cells = <0>;
-						#address-cells = <1>;
-						reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
-						interrupts = <1 3 12 3>;
-						interrupt-parent =
-							<&i8259>;
-
-						keyboard@0 {
-							reg = <0x0>;
-							compatible = "pnpPNP,303";
-						};
-
-						mouse@1 {
-							reg = <0x1>;
-							compatible = "pnpPNP,f03";
-						};
-					};
-
-					rtc@70 {
-						compatible = "pnpPNP,b00";
-						reg = <0x1 0x70 0x2>;
-					};
-
-					gpio@400 {
-						reg = <0x1 0x400 0x80>;
-					};
-				};
-			};
 		};
-
 	};
 
 	pci1: pcie@fffe09000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
 		reg = <0xf 0xffe09000 0 0x1000>;
-		bus-range = <0 255>;
 		ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x00010000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <25 2>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x4 0x1
-			0000 0x0 0x0 0x2 &mpic 0x5 0x1
-			0000 0x0 0x0 0x3 &mpic 0x6 0x1
-			0000 0x0 0x0 0x4 &mpic 0x7 0x1
-			>;
 		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
 			ranges = <0x2000000 0x0 0xe0000000
 				  0x2000000 0x0 0xe0000000
 				  0x0 0x20000000
@@ -771,31 +66,10 @@
 	};
 
 	pci2: pcie@fffe0a000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
 		reg = <0xf 0xffe0a000 0 0x1000>;
-		bus-range = <0 255>;
 		ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x00010000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <26 2>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x0 0x1
-			0000 0x0 0x0 0x2 &mpic 0x1 0x1
-			0000 0x0 0x0 0x3 &mpic 0x2 0x1
-			0000 0x0 0x0 0x4 &mpic 0x3 0x1
-			>;
 		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
 			ranges = <0x2000000 0x0 0xe0000000
 				  0x2000000 0x0 0xe0000000
 				  0x0 0x20000000
@@ -806,3 +80,11 @@
 		};
 	};
 };
+
+/*
+ * mpc8572ds.dtsi must be last to ensure board_pci0 overrides pci0 settings
+ * for interrupt-map & interrupt-map-mask
+ */
+
+/include/ "fsl/mpc8572si-post.dtsi"
+/include/ "mpc8572ds.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
index 3375c2a..d34d127 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
@@ -14,494 +14,69 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "mpc8572ds.dts"
+
 / {
 	model = "fsl,MPC8572DS";
 	compatible = "fsl,MPC8572DS", "fsl,MPC8572DS-CAMP";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		pci0 = &pci0;
-		pci1 = &pci1;
-	};
 
 	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		PowerPC,8572@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <0x8000>;		// L1, 32K
-			i-cache-size = <0x8000>;		// L1, 32K
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-			next-level-cache = <&L2>;
 		};
-
+		PowerPC,8572@1 {
+			status = "disabled";
+		};
 	};
 
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0>;	// Filled by U-Boot
+	localbus@ffe05000 {
+		status = "disabled";
 	};
 
 	soc8572@ffe00000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x0 0xffe00000 0x100000>;
-		bus-frequency = <0>;		// Filled out by uboot.
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <12>;
+		serial@4600 {
+			status = "disabled";
 		};
-
-		ecm@1000 {
-			compatible = "fsl,mpc8572-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
+		dma@c300 {
+			status = "disabled";
 		};
-
-		memory-controller@2000 {
-			compatible = "fsl,mpc8572-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
+		gpio-controller@f000 {
 		};
-
-		memory-controller@6000 {
-			compatible = "fsl,mpc8572-memory-controller";
-			reg = <0x6000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,mpc8572-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;	// 32 bytes
+		l2-cache-controller@20000 {
 			cache-size = <0x80000>;	// L2, 512K
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
 		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
+		ethernet@26000 {
+			status = "disabled";
 		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
+		mdio@26520 {
+			status = "disabled";
 		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
+		ethernet@27000 {
+			status = "disabled";
 		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30 2 34 2>;
-			interrupt-parent = <&mpic>;
-			phy-handle = <&phy0>;
-			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@0 {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 1>;
-					reg = <0x0>;
-				};
-				phy1: ethernet-phy@1 {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 1>;
-					reg = <0x1>;
-				};
-			};
+		mdio@27520 {
+			status = "disabled";
 		};
-
-		enet1: ethernet@25000 {
-			cell-index = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 2 36 2 40 2>;
-			interrupt-parent = <&mpic>;
-			phy-handle = <&phy1>;
-			phy-connection-type = "rgmii-id";
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
+		pic@40000 {
+			protected-sources = <
+			31 32 33 37 38 39       /* enet2 enet3 */
+			76 77 78 79 26 42	/* dma2 pci2 serial*/
+			0xe4 0xe5 0xe6 0xe7	/* msi */
+			>;
 		};
 
 		msi@41600 {
-			compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
-			reg = <0x41600 0x80>;
 			msi-available-ranges = <0 0x80>;
 			interrupts = <
 				0xe0 0
 				0xe1 0
 				0xe2 0
 				0xe3 0>;
-			interrupt-parent = <&mpic>;
-		};
-
-		global-utilities@e0000 {	//global utilities block
-			compatible = "fsl,mpc8572-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
-				     "fsl,sec2.1", "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <45 2 58 2>;
-			interrupt-parent = <&mpic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0x9fe>;
-			fsl,descriptor-types-mask = <0x3ab0ebf>;
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-			protected-sources = <
-			31 32 33 37 38 39       /* enet2 enet3 */
-			76 77 78 79 26 42	/* dma2 pci2 serial*/
-			0xe4 0xe5 0xe6 0xe7	/* msi */
-			>;
 		};
-	};
-
-	pci0: pcie@ffe08000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xffe08000 0x1000>;
-		bus-range = <0 255>;
-		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
-			  0x1000000 0x0 0x0 0xffc00000 0x0 0x10000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <24 2>;
-		interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
-		interrupt-map = <
-			/* IDSEL 0x11 func 0 - PCI slot 1 */
-			0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
-			0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
-			0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
-			0x8800 0x0 0x0 0x4 &mpic 0x1 0x1
-
-			/* IDSEL 0x11 func 1 - PCI slot 1 */
-			0x8900 0x0 0x0 0x1 &mpic 0x2 0x1
-			0x8900 0x0 0x0 0x2 &mpic 0x3 0x1
-			0x8900 0x0 0x0 0x3 &mpic 0x4 0x1
-			0x8900 0x0 0x0 0x4 &mpic 0x1 0x1
-
-			/* IDSEL 0x11 func 2 - PCI slot 1 */
-			0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1
-			0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1
-			0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1
-			0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1
-
-			/* IDSEL 0x11 func 3 - PCI slot 1 */
-			0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1
-			0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1
-			0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1
-			0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1
-
-			/* IDSEL 0x11 func 4 - PCI slot 1 */
-			0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1
-			0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1
-			0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1
-			0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1
-
-			/* IDSEL 0x11 func 5 - PCI slot 1 */
-			0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1
-			0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1
-			0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1
-			0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1
-
-			/* IDSEL 0x11 func 6 - PCI slot 1 */
-			0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1
-			0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1
-			0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1
-			0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1
-
-			/* IDSEL 0x11 func 7 - PCI slot 1 */
-			0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1
-			0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1
-			0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1
-			0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1
-
-			/* IDSEL 0x12 func 0 - PCI slot 2 */
-			0x9000 0x0 0x0 0x1 &mpic 0x3 0x1
-			0x9000 0x0 0x0 0x2 &mpic 0x4 0x1
-			0x9000 0x0 0x0 0x3 &mpic 0x1 0x1
-			0x9000 0x0 0x0 0x4 &mpic 0x2 0x1
-
-			/* IDSEL 0x12 func 1 - PCI slot 2 */
-			0x9100 0x0 0x0 0x1 &mpic 0x3 0x1
-			0x9100 0x0 0x0 0x2 &mpic 0x4 0x1
-			0x9100 0x0 0x0 0x3 &mpic 0x1 0x1
-			0x9100 0x0 0x0 0x4 &mpic 0x2 0x1
-
-			/* IDSEL 0x12 func 2 - PCI slot 2 */
-			0x9200 0x0 0x0 0x1 &mpic 0x3 0x1
-			0x9200 0x0 0x0 0x2 &mpic 0x4 0x1
-			0x9200 0x0 0x0 0x3 &mpic 0x1 0x1
-			0x9200 0x0 0x0 0x4 &mpic 0x2 0x1
-
-			/* IDSEL 0x12 func 3 - PCI slot 2 */
-			0x9300 0x0 0x0 0x1 &mpic 0x3 0x1
-			0x9300 0x0 0x0 0x2 &mpic 0x4 0x1
-			0x9300 0x0 0x0 0x3 &mpic 0x1 0x1
-			0x9300 0x0 0x0 0x4 &mpic 0x2 0x1
-
-			/* IDSEL 0x12 func 4 - PCI slot 2 */
-			0x9400 0x0 0x0 0x1 &mpic 0x3 0x1
-			0x9400 0x0 0x0 0x2 &mpic 0x4 0x1
-			0x9400 0x0 0x0 0x3 &mpic 0x1 0x1
-			0x9400 0x0 0x0 0x4 &mpic 0x2 0x1
-
-			/* IDSEL 0x12 func 5 - PCI slot 2 */
-			0x9500 0x0 0x0 0x1 &mpic 0x3 0x1
-			0x9500 0x0 0x0 0x2 &mpic 0x4 0x1
-			0x9500 0x0 0x0 0x3 &mpic 0x1 0x1
-			0x9500 0x0 0x0 0x4 &mpic 0x2 0x1
-
-			/* IDSEL 0x12 func 6 - PCI slot 2 */
-			0x9600 0x0 0x0 0x1 &mpic 0x3 0x1
-			0x9600 0x0 0x0 0x2 &mpic 0x4 0x1
-			0x9600 0x0 0x0 0x3 &mpic 0x1 0x1
-			0x9600 0x0 0x0 0x4 &mpic 0x2 0x1
-
-			/* IDSEL 0x12 func 7 - PCI slot 2 */
-			0x9700 0x0 0x0 0x1 &mpic 0x3 0x1
-			0x9700 0x0 0x0 0x2 &mpic 0x4 0x1
-			0x9700 0x0 0x0 0x3 &mpic 0x1 0x1
-			0x9700 0x0 0x0 0x4 &mpic 0x2 0x1
-
-			// IDSEL 0x1c  USB
-			0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
-			0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
-			0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
-			0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
-
-			// IDSEL 0x1d  Audio
-			0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
-
-			// IDSEL 0x1e Legacy
-			0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
-			0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
-
-			// IDSEL 0x1f IDE/SATA
-			0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
-			0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
-
-			>;
-
-		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			ranges = <0x2000000 0x0 0x80000000
-				  0x2000000 0x0 0x80000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x10000>;
-			uli1575@0 {
-				reg = <0x0 0x0 0x0 0x0 0x0>;
-				#size-cells = <2>;
-				#address-cells = <3>;
-				ranges = <0x2000000 0x0 0x80000000
-					  0x2000000 0x0 0x80000000
-					  0x0 0x20000000
-
-					  0x1000000 0x0 0x0
-					  0x1000000 0x0 0x0
-					  0x0 0x10000>;
-				isa@1e {
-					device_type = "isa";
-					#interrupt-cells = <2>;
-					#size-cells = <1>;
-					#address-cells = <2>;
-					reg = <0xf000 0x0 0x0 0x0 0x0>;
-					ranges = <0x1 0x0 0x1000000 0x0 0x0
-						  0x1000>;
-					interrupt-parent = <&i8259>;
-
-					i8259: interrupt-controller@20 {
-						reg = <0x1 0x20 0x2
-						       0x1 0xa0 0x2
-						       0x1 0x4d0 0x2>;
-						interrupt-controller;
-						device_type = "interrupt-controller";
-						#address-cells = <0>;
-						#interrupt-cells = <2>;
-						compatible = "chrp,iic";
-						interrupts = <9 2>;
-						interrupt-parent = <&mpic>;
-					};
-
-					i8042@60 {
-						#size-cells = <0>;
-						#address-cells = <1>;
-						reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
-						interrupts = <1 3 12 3>;
-						interrupt-parent =
-							<&i8259>;
-
-						keyboard@0 {
-							reg = <0x0>;
-							compatible = "pnpPNP,303";
-						};
-
-						mouse@1 {
-							reg = <0x1>;
-							compatible = "pnpPNP,f03";
-						};
-					};
-
-					rtc@70 {
-						compatible = "pnpPNP,b00";
-						reg = <0x1 0x70 0x2>;
-					};
-
-					gpio@400 {
-						reg = <0x1 0x400 0x80>;
-					};
-				};
-			};
+		timer@42100 {
+			status = "disabled";
 		};
-
 	};
-
-	pci1: pcie@ffe09000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xffe09000 0x1000>;
-		bus-range = <0 255>;
-		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x0 0xffc10000 0x0 0x10000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <25 2>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x4 0x1
-			0000 0x0 0x0 0x2 &mpic 0x5 0x1
-			0000 0x0 0x0 0x3 &mpic 0x6 0x1
-			0000 0x0 0x0 0x4 &mpic 0x7 0x1
-			>;
-		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			ranges = <0x2000000 0x0 0xa0000000
-				  0x2000000 0x0 0xa0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x10000>;
-		};
+	pcie@ffe0a000 {
+		status = "disabled";
 	};
 };
diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
index e7b477f..d6a8faf 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
@@ -15,169 +15,74 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "mpc8572ds.dts"
+
 / {
 	model = "fsl,MPC8572DS";
 	compatible = "fsl,MPC8572DS", "fsl,MPC8572DS-CAMP";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet2 = &enet2;
-		ethernet3 = &enet3;
-		serial0 = &serial0;
-		pci2 = &pci2;
-	};
 
 	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
+		PowerPC,8572@0 {
+			status = "disabled";
+		};
 		PowerPC,8572@1 {
-			device_type = "cpu";
-			reg = <0x1>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <0x8000>;		// L1, 32K
-			i-cache-size = <0x8000>;		// L1, 32K
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-			next-level-cache = <&L2>;
 		};
 	};
 
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0>;	// Filled by U-Boot
+	localbus@ffe05000 {
+		status = "disabled";
 	};
 
 	soc8572@ffe00000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x0 0xffe00000 0x100000>;
-		bus-frequency = <0>;		// Filled out by uboot.
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,mpc8572-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>; // 32 bytes
-			cache-size = <0x80000>; // L2, 512K
-			interrupt-parent = <&mpic>;
+		ecm-law@0 {
+			status = "disabled";
 		};
-
-		dma@c300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
-			reg = <0xc300 0x4>;
-			ranges = <0x0 0xc100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <76 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <77 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <78 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <79 2>;
-			};
+		ecm@1000 {
+			status = "disabled";
+		};
+		memory-controller@2000 {
+			status = "disabled";
+		};
+		memory-controller@6000 {
+			status = "disabled";
+		};
+		i2c@3000 {
+			status = "disabled";
+		};
+		i2c@3100 {
+			status = "disabled";
+		};
+		serial@4500 {
+			status = "disabled";
+		};
+		gpio-controller@f000 {
+			status = "disabled";
+		};
+		l2-cache-controller@20000 {
+			cache-size = <0x80000>;	// L2, 512K
+		};
+		dma@21300 {
+			status = "disabled";
+		};
+		ethernet@24000 {
+			status = "disabled";
 		};
-
 		mdio@24520 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,gianfar-mdio";
-			reg = <0x24520 0x20>;
-
-			phy2: ethernet-phy@2 {
-				interrupt-parent = <&mpic>;
-				reg = <0x2>;
-			};
-			phy3: ethernet-phy@3 {
-				interrupt-parent = <&mpic>;
-				reg = <0x3>;
-			};
+			status = "disabled";
 		};
-
-		enet2: ethernet@26000 {
-			cell-index = <2>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x26000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <31 2 32 2 33 2>;
-			interrupt-parent = <&mpic>;
-			phy-handle = <&phy2>;
-			phy-connection-type = "rgmii-id";
+		ptp_clock@24e00 {
+			status = "disabled";
 		};
-
-		enet3: ethernet@27000 {
-			cell-index = <3>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x27000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <37 2 38 2 39 2>;
-			interrupt-parent = <&mpic>;
-			phy-handle = <&phy3>;
-			phy-connection-type = "rgmii-id";
+		ethernet@25000 {
+			status = "disabled";
 		};
-
-		msi@41600 {
-			compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
-			reg = <0x41600 0x80>;
-			msi-available-ranges = <0x80 0x80>;
-			interrupts = <
-				0xe4 0
-				0xe5 0
-				0xe6 0
-				0xe7 0>;
-			interrupt-parent = <&mpic>;
+		mdio@25520 {
+			status = "disabled";
 		};
-
-		serial0: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
+		crypto@30000 {
+			status = "disabled";
 		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
+		pic@40000 {
 			protected-sources = <
 			18 16 10 42 45 58	/* MEM L2 mdio serial crypto */
 			29 30 34 35 36 40	/* enet0 enet1 */
@@ -189,41 +94,25 @@
 			0xe0 0xe1 0xe2 0xe3	/* msi */
 			>;
 		};
-	};
-
-	pci2: pcie@ffe0a000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xffe0a000 0x1000>;
-		bus-range = <0 255>;
-		ranges = <0x2000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000
-			  0x1000000 0x0 0x0 0xffc20000 0x0 0x10000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <26 2>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x0 0x1
-			0000 0x0 0x0 0x2 &mpic 0x1 0x1
-			0000 0x0 0x0 0x3 &mpic 0x2 0x1
-			0000 0x0 0x0 0x4 &mpic 0x3 0x1
-			>;
-		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			ranges = <0x2000000 0x0 0xc0000000
-				  0x2000000 0x0 0xc0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x10000>;
+		timer@41100 {
+			status = "disabled";
 		};
+		msi@41600 {
+			msi-available-ranges = <0x80 0x80>;
+			interrupts = <
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+		};
+		global-utilities@e0000 {
+			status = "disabled";
+		};
+	};
+	pcie@ffe08000 {
+		status = "disabled";
+	};
+	pcie@ffe09000 {
+		status = "disabled";
 	};
 };
diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
index 83c3218..6a109a0 100644
--- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts
+++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
@@ -175,7 +175,7 @@
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x100>;
 			clock-frequency = <0>;
 			interrupts = <42 2>;
@@ -186,7 +186,7 @@
 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4600 0x100>;
 			clock-frequency = <0>;
 			interrupts = <42 2>;
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
index 848320e..1e8666c 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -26,13 +26,6 @@
 		serial1 = &serial1;
 		pci0 = &pci0;
 		pci1 = &pci1;
-/*
- * Only one of Rapid IO or PCI can be present due to HW limitations and
- * due to the fact that the 2 now share address space in the new memory
- * map.  The most likely case is that we have PCI, so comment out the
- * rapidio node.  Leave it here for reference.
- */
-		/* rapidio0 = &rapidio0; */
 	};
 
 	cpus {
@@ -335,7 +328,7 @@
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x100>;
 			clock-frequency = <0>;
 			interrupts = <42 2>;
@@ -345,7 +338,7 @@
 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4600 0x100>;
 			clock-frequency = <0>;
 			interrupts = <28 2>;
@@ -361,6 +354,41 @@
 			device_type = "open-pic";
 		};
 
+		rmu: rmu@d3000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,srio-rmu";
+			reg = <0xd3000 0x500>;
+			ranges = <0x0 0xd3000 0x500>;
+
+			message-unit@0 {
+				compatible = "fsl,srio-msg-unit";
+				reg = <0x0 0x100>;
+				interrupts = <
+					53 2 /* msg1_tx_irq */
+					54 2>;/* msg1_rx_irq */
+			};
+			message-unit@100 {
+				compatible = "fsl,srio-msg-unit";
+				reg = <0x100 0x100>;
+				interrupts = <
+					55 2  /* msg2_tx_irq */
+					56 2>;/* msg2_rx_irq */
+			};
+			doorbell-unit@400 {
+				compatible = "fsl,srio-dbell-unit";
+				reg = <0x400 0x80>;
+				interrupts = <
+					49 2  /* bell_outb_irq */
+					50 2>;/* bell_inb_irq */
+			};
+			port-write-unit@4e0 {
+				compatible = "fsl,srio-port-write-unit";
+				reg = <0x4e0 0x20>;
+				interrupts = <48 2>;
+			};
+		};
+
 		global-utilities@e0000 {
 			compatible = "fsl,mpc8641-guts";
 			reg = <0xe0000 0x1000>;
@@ -612,16 +640,27 @@
 		};
 	};
 /*
-	rapidio0: rapidio@ffec0000 {
+ * Only one of Rapid IO or PCI can be present due to HW limitations and
+ * due to the fact that the 2 now share address space in the new memory
+ * map.  The most likely case is that we have PCI, so comment out the
+ * rapidio node.  Leave it here for reference.
+
+	rapidio@ffec0000 {
+		reg = <0xffec0000 0x11000>;
+		compatible = "fsl,srio";
+		interrupt-parent = <&mpic>;
+		interrupts = <48 2>;
 		#address-cells = <2>;
 		#size-cells = <2>;
-		compatible = "fsl,rapidio-delta";
-		reg = <0xffec0000 0x20000>;
-		ranges = <0 0 0x80000000 0 0x20000000>;
-		interrupt-parent = <&mpic>;
-		// err_irq bell_outb_irq bell_inb_irq
-		//	msg1_tx_irq msg1_rx_irq	msg2_tx_irq msg2_rx_irq
-		interrupts = <48 2 49 2 50 2 53 2 54 2 55 2 56 2>;
+		fsl,srio-rmu-handle = <&rmu>;
+		ranges;
+
+		port1 {
+			#address-cells = <2>;
+			#size-cells = <2>;
+			cell-index = <1>;
+			ranges = <0 0 0x80000000 0 0x20000000>;
+		};
 	};
 */
 
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts b/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts
index 8be8e70..fd4cd4d 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts
@@ -328,7 +328,7 @@
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x100>;
 			clock-frequency = <0>;
 			interrupts = <42 2>;
@@ -338,7 +338,7 @@
 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4600 0x100>;
 			clock-frequency = <0>;
 			interrupts = <28 2>;
diff --git a/arch/powerpc/boot/dts/obs600.dts b/arch/powerpc/boot/dts/obs600.dts
new file mode 100644
index 0000000..18e7d79
--- /dev/null
+++ b/arch/powerpc/boot/dts/obs600.dts
@@ -0,0 +1,314 @@
+/*
+ * Device Tree Source for PlatHome OpenBlockS 600 (405EX)
+ *
+ * Copyright 2011 Ben Herrenschmidt, IBM Corp.
+ *
+ * Based on Kilauea by:
+ *
+ * Copyright 2007-2009 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "PlatHome,OpenBlockS 600";
+	compatible = "plathome,obs600";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		serial0 = &UART0;
+		serial1 = &UART1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,405EX";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+			timebase-frequency = <0>; /* Filled in by U-Boot */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <16384>; /* 16 kB */
+			d-cache-size = <16384>; /* 16 kB */
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */
+	};
+
+	UIC0: interrupt-controller {
+		compatible = "ibm,uic-405ex", "ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-405ex","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic-405ex","ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0x0e0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	CPM0: cpm {
+		compatible = "ibm,cpm";
+		dcr-access-method = "native";
+		dcr-reg = <0x0b0 0x003>;
+		unused-units = <0x00000000>;
+		idle-doze = <0x02000000>;
+		standby = <0xe3e74800>;
+	};
+
+	plb {
+		compatible = "ibm,plb-405ex", "ibm,plb4";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by U-Boot */
+
+		SDRAM0: memory-controller {
+			compatible = "ibm,sdram-405ex", "ibm,sdram-4xx-ddr2";
+			dcr-reg = <0x010 0x002>;
+			interrupt-parent = <&UIC2>;
+			interrupts = <0x5 0x4	/* ECC DED Error */
+				      0x6 0x4>;	/* ECC SEC Error */
+		};
+
+		CRYPTO: crypto@ef700000 {
+			compatible = "amcc,ppc405ex-crypto", "amcc,ppc4xx-crypto";
+			reg = <0xef700000 0x80400>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <0x17 0x2>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-405ex", "ibm,mcmal2";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <2>;
+			num-rx-chans = <2>;
+			interrupt-parent = <&MAL0>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
+			interrupt-map-mask = <0xffffffff>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-405ex", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x80000000 0x80000000 0x10000000
+				  0xef600000 0xef600000 0x00a00000
+				  0xf0000000 0xf0000000 0x10000000>;
+			dcr-reg = <0x0a0 0x005>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-405ex", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				/* ranges property is supplied by U-Boot */
+				interrupts = <0x5 0x1>;
+				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "amd,s29gl512n", "cfi-flash";
+					bank-width = <2>;
+					reg = <0x00000000 0x00000000 0x08000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel + initrd";
+						reg = <0x00000000 0x03de0000>;
+					};
+					partition@3de0000 {
+						label = "user config area";
+						reg = <0x03de0000 0x00080000>;
+					};
+					partition@3e60000 {
+						label = "user program area";
+						reg = <0x03e60000 0x04000000>;
+					};
+					partition@7e60000 {
+						label = "flat device tree";
+						reg = <0x07e60000 0x00080000>;
+					};
+					partition@7ee0000 {
+						label = "test program";
+						reg = <0x07ee0000 0x00080000>;
+					};
+					partition@7f60000 {
+						label = "u-boot env";
+						reg = <0x07f60000 0x00040000>;
+					};
+					partition@7fa0000 {
+						label = "u-boot";
+						reg = <0x07fa0000 0x00060000>;
+					};
+				};
+			};
+
+			UART0: serial@ef600200 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600200 0x00000008>;
+				virtual-reg = <0xef600200>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1a 0x4>;
+			};
+
+			UART1: serial@ef600300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1 0x4>;
+			};
+
+			IIC0: i2c@ef600400 {
+				compatible = "ibm,iic-405ex", "ibm,iic";
+				reg = <0xef600400 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				rtc@68 {
+					compatible = "dallas,ds1340";
+					reg = <0x68>;
+				};
+			};
+
+			IIC1: i2c@ef600500 {
+				compatible = "ibm,iic-405ex", "ibm,iic";
+				reg = <0xef600500 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x7 0x4>;
+			};
+
+			RGMII0: emac-rgmii@ef600b00 {
+				compatible = "ibm,rgmii-405ex", "ibm,rgmii";
+				reg = <0xef600b00 0x00000104>;
+				has-mdio;
+			};
+
+			EMAC0: ethernet@ef600900 {
+				linux,network-index = <0x0>;
+				device_type = "network";
+				compatible = "ibm,emac-405ex", "ibm,emac4sync";
+				interrupt-parent = <&EMAC0>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
+						/*Wake*/  0x1 &UIC1 0x1d 0x4>;
+				reg = <0xef600900 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				tx-fifo-size-gige = <16384>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+
+			EMAC1: ethernet@ef600a00 {
+				linux,network-index = <0x1>;
+				device_type = "network";
+				compatible = "ibm,emac-405ex", "ibm,emac4sync";
+				interrupt-parent = <&EMAC1>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4
+						/*Wake*/  0x1 &UIC1 0x1f 0x4>;
+				reg = <0xef600a00 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <1>;
+				mal-rx-channel = <1>;
+				cell-index = <1>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				tx-fifo-size-gige = <16384>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <1>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+
+			GPIO: gpio@ef600800 {
+				device_type = "gpio";
+				compatible = "ibm,gpio-405ex", "ibm,ppc4xx-gpio";
+				reg = <0xef600800 0x50>;
+			};
+		};
+	};
+        chosen {
+                linux,stdout-path = "/plb/opb/serial@ef600200";
+        };
+};
diff --git a/arch/powerpc/boot/dts/p1010rdb.dts b/arch/powerpc/boot/dts/p1010rdb.dts
index d6c669c..b868d22 100644
--- a/arch/powerpc/boot/dts/p1010rdb.dts
+++ b/arch/powerpc/boot/dts/p1010rdb.dts
@@ -9,230 +9,33 @@
  * option) any later version.
  */
 
-/include/ "p1010si.dtsi"
+/include/ "fsl/p1010si-pre.dtsi"
 
 / {
 	model = "fsl,P1010RDB";
 	compatible = "fsl,P1010RDB";
 
-	aliases {
-		serial0 = &serial0;
-		serial1 = &serial1;
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		ethernet2 = &enet2;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		can0 = &can0;
-		can1 = &can1;
-	};
-
 	memory {
 		device_type = "memory";
 	};
 
-	ifc@ffe1e000 {
+	board_ifc: ifc: ifc@ffe1e000 {
 		/* NOR, NAND Flashes and CPLD on board */
 		ranges = <0x0 0x0 0x0 0xee000000 0x02000000
 			  0x1 0x0 0x0 0xff800000 0x00010000
 			  0x3 0x0 0x0 0xffb00000 0x00000020>;
-
-		nor@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x0 0x0 0x2000000>;
-			bank-width = <2>;
-			device-width = <1>;
-
-			partition@40000 {
-				/* 256KB for DTB Image */
-				reg = <0x00040000 0x00040000>;
-				label = "NOR DTB Image";
-			};
-
-			partition@80000 {
-				/* 7 MB for Linux Kernel Image */
-				reg = <0x00080000 0x00700000>;
-				label = "NOR Linux Kernel Image";
-			};
-
-			partition@800000 {
-				/* 20MB for JFFS2 based Root file System */
-				reg = <0x00800000 0x01400000>;
-				label = "NOR JFFS2 Root File System";
-			};
-
-			partition@1f00000 {
-				/* This location must not be altered  */
-				/* 512KB for u-boot Bootloader Image */
-				/* 512KB for u-boot Environment Variables */
-				reg = <0x01f00000 0x00100000>;
-				label = "NOR U-Boot Image";
-				read-only;
-			};
-		};
-
-		nand@1,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,ifc-nand";
-			reg = <0x1 0x0 0x10000>;
-
-			partition@0 {
-				/* This location must not be altered  */
-				/* 1MB for u-boot Bootloader Image */
-				reg = <0x0 0x00100000>;
-				label = "NAND U-Boot Image";
-				read-only;
-			};
-
-			partition@100000 {
-				/* 1MB for DTB Image */
-				reg = <0x00100000 0x00100000>;
-				label = "NAND DTB Image";
-			};
-
-			partition@200000 {
-				/* 4MB for Linux Kernel Image */
-				reg = <0x00200000 0x00400000>;
-				label = "NAND Linux Kernel Image";
-			};
-
-			partition@600000 {
-				/* 4MB for Compressed Root file System Image */
-				reg = <0x00600000 0x00400000>;
-				label = "NAND Compressed RFS Image";
-			};
-
-			partition@a00000 {
-				/* 15MB for JFFS2 based Root file System */
-				reg = <0x00a00000 0x00f00000>;
-				label = "NAND JFFS2 Root File System";
-			};
-
-			partition@1900000 {
-				/* 7MB for User Area */
-				reg = <0x01900000 0x00700000>;
-				label = "NAND User area";
-			};
-		};
-
-		cpld@3,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,p1010rdb-cpld";
-			reg = <0x3 0x0 0x0000020>;
-			bank-width = <1>;
-			device-width = <1>;
-		};
+		reg = <0x0 0xffe1e000 0 0x2000>;
 	};
 
-	soc@ffe00000 {
-		spi@7000 {
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "spansion,s25sl12801";
-				reg = <0>;
-				spi-max-frequency = <50000000>;
-
-				partition@0 {
-					/* 1MB for u-boot Bootloader Image */
-					/* 1MB for Environment */
-					reg = <0x0 0x00100000>;
-					label = "SPI Flash U-Boot Image";
-					read-only;
-				};
-
-				partition@100000 {
-					/* 512KB for DTB Image */
-					reg = <0x00100000 0x00080000>;
-					label = "SPI Flash DTB Image";
-				};
-
-				partition@180000 {
-					/* 4MB for Linux Kernel Image */
-					reg = <0x00180000 0x00400000>;
-					label = "SPI Flash Linux Kernel Image";
-				};
-
-				partition@580000 {
-					/* 4MB for Compressed RFS Image */
-					reg = <0x00580000 0x00400000>;
-					label = "SPI Flash Compressed RFSImage";
-				};
-
-				partition@980000 {
-					/* 6.5MB for JFFS2 based RFS */
-					reg = <0x00980000 0x00680000>;
-					label = "SPI Flash JFFS2 RFS";
-				};
-			};
-		};
-
-		usb@22000 {
-			phy_type = "utmi";
-		};
-
-		mdio@24000 {
-			phy0: ethernet-phy@0 {
-				interrupt-parent = <&mpic>;
-				interrupts = <3 1>;
-				reg = <0x1>;
-			};
-
-			phy1: ethernet-phy@1 {
-				interrupt-parent = <&mpic>;
-				interrupts = <2 1>;
-				reg = <0x0>;
-			};
-
-			phy2: ethernet-phy@2 {
-				interrupt-parent = <&mpic>;
-				interrupts = <2 1>;
-				reg = <0x2>;
-			};
-		};
-
-		enet0: ethernet@b0000 {
-			phy-handle = <&phy0>;
-			phy-connection-type = "rgmii-id";
-		};
-
-		enet1: ethernet@b1000 {
-			phy-handle = <&phy1>;
-			tbi-handle = <&tbi0>;
-			phy-connection-type = "sgmii";
-		};
-
-		enet2: ethernet@b2000 {
-			phy-handle = <&phy2>;
-			tbi-handle = <&tbi1>;
-			phy-connection-type = "sgmii";
-		};
+	board_soc: soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
 	};
 
 	pci0: pcie@ffe09000 {
+		reg = <0 0xffe09000 0 0x1000>;
 		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
 		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-			interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x4 0x1
-			0000 0x0 0x0 0x2 &mpic 0x5 0x1
-			0000 0x0 0x0 0x3 &mpic 0x6 0x1
-			0000 0x0 0x0 0x4 &mpic 0x7 0x1
-			>;
-
 			ranges = <0x2000000 0x0 0xa0000000
 				  0x2000000 0x0 0xa0000000
 				  0x0 0x20000000
@@ -244,24 +47,10 @@
 	};
 
 	pci1: pcie@ffe0a000 {
+		reg = <0 0xffe0a000 0 0x1000>;
 		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
 		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-			interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x4 0x1
-			0000 0x0 0x0 0x2 &mpic 0x5 0x1
-			0000 0x0 0x0 0x3 &mpic 0x6 0x1
-			0000 0x0 0x0 0x4 &mpic 0x7 0x1
-			>;
 			ranges = <0x2000000 0x0 0x80000000
 				  0x2000000 0x0 0x80000000
 				  0x0 0x20000000
@@ -272,3 +61,6 @@
 		};
 	};
 };
+
+/include/ "p1010rdb.dtsi"
+/include/ "fsl/p1010si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1010rdb.dtsi b/arch/powerpc/boot/dts/p1010rdb.dtsi
new file mode 100644
index 0000000..d4c4a77
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1010rdb.dtsi
@@ -0,0 +1,234 @@
+/*
+ * P1010 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_ifc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x2000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@40000 {
+			/* 256KB for DTB Image */
+			reg = <0x00040000 0x00040000>;
+			label = "NOR DTB Image";
+		};
+
+		partition@80000 {
+			/* 7 MB for Linux Kernel Image */
+			reg = <0x00080000 0x00700000>;
+			label = "NOR Linux Kernel Image";
+		};
+
+		partition@800000 {
+			/* 20MB for JFFS2 based Root file System */
+			reg = <0x00800000 0x01400000>;
+			label = "NOR JFFS2 Root File System";
+		};
+
+		partition@1f00000 {
+			/* This location must not be altered  */
+			/* 512KB for u-boot Bootloader Image */
+			/* 512KB for u-boot Environment Variables */
+			reg = <0x01f00000 0x00100000>;
+			label = "NOR U-Boot Image";
+			read-only;
+		};
+	};
+
+	nand@1,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,ifc-nand";
+		reg = <0x1 0x0 0x10000>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 1MB for u-boot Bootloader Image */
+			reg = <0x0 0x00100000>;
+			label = "NAND U-Boot Image";
+			read-only;
+		};
+
+		partition@100000 {
+			/* 1MB for DTB Image */
+			reg = <0x00100000 0x00100000>;
+			label = "NAND DTB Image";
+		};
+
+		partition@200000 {
+			/* 4MB for Linux Kernel Image */
+			reg = <0x00200000 0x00400000>;
+			label = "NAND Linux Kernel Image";
+		};
+
+		partition@600000 {
+			/* 4MB for Compressed Root file System Image */
+			reg = <0x00600000 0x00400000>;
+			label = "NAND Compressed RFS Image";
+		};
+
+		partition@a00000 {
+			/* 15MB for JFFS2 based Root file System */
+			reg = <0x00a00000 0x00f00000>;
+			label = "NAND JFFS2 Root File System";
+		};
+
+		partition@1900000 {
+			/* 7MB for User Area */
+			reg = <0x01900000 0x00700000>;
+			label = "NAND User area";
+		};
+	};
+
+	cpld@3,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,p1010rdb-cpld";
+		reg = <0x3 0x0 0x0000020>;
+		bank-width = <1>;
+		device-width = <1>;
+	};
+};
+
+&board_soc {
+	i2c@3000 {
+		rtc@68 {
+			compatible = "pericom,pt7c4338";
+			reg = <0x68>;
+		};
+	};
+
+	spi@7000 {
+		flash@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "spansion,s25sl12801";
+			reg = <0>;
+			spi-max-frequency = <50000000>;
+
+			partition@0 {
+				/* 1MB for u-boot Bootloader Image */
+				/* 1MB for Environment */
+				reg = <0x0 0x00100000>;
+				label = "SPI Flash U-Boot Image";
+				read-only;
+			};
+
+			partition@100000 {
+				/* 512KB for DTB Image */
+				reg = <0x00100000 0x00080000>;
+				label = "SPI Flash DTB Image";
+			};
+
+			partition@180000 {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00180000 0x00400000>;
+				label = "SPI Flash Linux Kernel Image";
+			};
+
+			partition@580000 {
+				/* 4MB for Compressed RFS Image */
+				reg = <0x00580000 0x00400000>;
+				label = "SPI Flash Compressed RFSImage";
+			};
+
+			partition@980000 {
+				/* 6.5MB for JFFS2 based RFS */
+				reg = <0x00980000 0x00680000>;
+				label = "SPI Flash JFFS2 RFS";
+			};
+		};
+	};
+
+	usb@22000 {
+		phy_type = "utmi";
+		dr_mode = "host";
+	};
+
+	mdio@24000 {
+		phy0: ethernet-phy@0 {
+			interrupts = <3 1 0 0>;
+			reg = <0x1>;
+		};
+
+		phy1: ethernet-phy@1 {
+			interrupts = <2 1 0 0>;
+			reg = <0x0>;
+		};
+
+		phy2: ethernet-phy@2 {
+			interrupts = <2 1 0 0>;
+			reg = <0x2>;
+		};
+
+		tbi-phy@3 {
+			device-type = "tbi-phy";
+			reg = <0x3>;
+		};
+	};
+
+	mdio@25000 {
+		tbi0: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	mdio@26000 {
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet0: ethernet@b0000 {
+		phy-handle = <&phy0>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	enet1: ethernet@b1000 {
+		phy-handle = <&phy1>;
+		tbi-handle = <&tbi0>;
+		phy-connection-type = "sgmii";
+	};
+
+	enet2: ethernet@b2000 {
+		phy-handle = <&phy2>;
+		tbi-handle = <&tbi1>;
+		phy-connection-type = "sgmii";
+	};
+};
diff --git a/arch/powerpc/boot/dts/p1010rdb_36b.dts b/arch/powerpc/boot/dts/p1010rdb_36b.dts
new file mode 100644
index 0000000..64776f4
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1010rdb_36b.dts
@@ -0,0 +1,89 @@
+/*
+ * P1010 RDB Device Tree Source (36-bit address map)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1010si-pre.dtsi"
+
+/ {
+	model = "fsl,P1010RDB";
+	compatible = "fsl,P1010RDB";
+
+	memory {
+		device_type = "memory";
+	};
+
+	board_ifc: ifc: ifc@fffe1e000 {
+		/* NOR, NAND Flashes and CPLD on board */
+		ranges = <0x0 0x0 0xf 0xee000000 0x02000000
+			  0x1 0x0 0xf 0xff800000 0x00010000
+			  0x3 0x0 0xf 0xffb00000 0x00000020>;
+		reg = <0xf 0xffe1e000 0 0x2000>;
+	};
+
+	board_soc: soc: soc@fffe00000 {
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@fffe09000 {
+		reg = <0xf 0xffe09000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@fffe0a000 {
+		reg = <0xf 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p1010rdb.dtsi"
+/include/ "fsl/p1010si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1010si.dtsi b/arch/powerpc/boot/dts/p1010si.dtsi
deleted file mode 100644
index cabe0a4..0000000
--- a/arch/powerpc/boot/dts/p1010si.dtsi
+++ /dev/null
@@ -1,374 +0,0 @@
-/*
- * P1010si Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-/ {
-	compatible = "fsl,P1010";
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,P1010@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			next-level-cache = <&L2>;
-		};
-	};
-
-	ifc@ffe1e000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,ifc", "simple-bus";
-		reg = <0x0 0xffe1e000 0 0x2000>;
-		interrupts = <16 2 19 2>;
-		interrupt-parent = <&mpic>;
-	};
-
-	soc@ffe00000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "fsl,p1010-immr", "simple-bus";
-		ranges = <0x0  0x0 0xffe00000 0x100000>;
-		bus-frequency = <0>;		// Filled out by uboot.
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <12>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,p1010-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <16 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,p1010-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		spi@7000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc8536-espi";
-			reg = <0x7000 0x1000>;
-			interrupts = <59 0x2>;
-			interrupt-parent = <&mpic>;
-			fsl,espi-num-chipselects = <1>;
-		};
-
-		gpio: gpio-controller@f000 {
-			#gpio-cells = <2>;
-			compatible = "fsl,mpc8572-gpio";
-			reg = <0xf000 0x100>;
-			interrupts = <47 0x2>;
-			interrupt-parent = <&mpic>;
-			gpio-controller;
-		};
-
-		sata@18000 {
-			compatible = "fsl,pq-sata-v2";
-			reg = <0x18000 0x1000>;
-			cell-index = <1>;
-			interrupts = <74 0x2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		sata@19000 {
-			compatible = "fsl,pq-sata-v2";
-			reg = <0x19000 0x1000>;
-			cell-index = <2>;
-			interrupts = <41 0x2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		can0: can@1c000 {
-			compatible = "fsl,p1010-flexcan";
-			reg = <0x1c000 0x1000>;
-			interrupts = <48 0x2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		can1: can@1d000 {
-			compatible = "fsl,p1010-flexcan";
-			reg = <0x1d000 0x1000>;
-			interrupts = <61 0x2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,p1010-l2-cache-controller",
-					"fsl,p1014-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;	// 32 bytes
-			cache-size = <0x40000>; // L2,256K
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,p1010-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		usb@22000 {
-			compatible = "fsl-usb2-dr";
-			reg = <0x22000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupt-parent = <&mpic>;
-			interrupts = <28 0x2>;
-			dr_mode = "host";
-		};
-
-		mdio@24000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,etsec2-mdio";
-			reg = <0x24000 0x1000 0xb0030 0x4>;
-		};
-
-		mdio@25000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,etsec2-tbi";
-			reg = <0x25000 0x1000 0xb1030 0x4>;
-			tbi0: tbi-phy@11 {
-				reg = <0x11>;
-				device_type = "tbi-phy";
-			};
-		};
-
-		mdio@26000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,etsec2-tbi";
-			reg = <0x26000 0x1000 0xb1030 0x4>;
-			tbi1: tbi-phy@11 {
-				reg = <0x11>;
-				device_type = "tbi-phy";
-			};
-		};
-
-		sdhci@2e000 {
-			compatible = "fsl,esdhc";
-			reg = <0x2e000 0x1000>;
-			interrupts = <72 0x8>;
-			interrupt-parent = <&mpic>;
-			/* Filled in by U-Boot */
-			clock-frequency = <0>;
-			fsl,sdhci-auto-cmd12;
-		};
-
-		enet0: ethernet@b0000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "fsl,etsec2";
-			fsl,num_rx_queues = <0x8>;
-			fsl,num_tx_queues = <0x8>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupt-parent = <&mpic>;
-
-			queue-group@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xb0000 0x1000>;
-				fsl,rx-bit-map = <0xff>;
-				fsl,tx-bit-map = <0xff>;
-				interrupts = <29 2 30 2 34 2>;
-			};
-
-		};
-
-		enet1: ethernet@b1000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "fsl,etsec2";
-			fsl,num_rx_queues = <0x8>;
-			fsl,num_tx_queues = <0x8>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupt-parent = <&mpic>;
-
-			queue-group@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xb1000 0x1000>;
-				fsl,rx-bit-map = <0xff>;
-				fsl,tx-bit-map = <0xff>;
-				interrupts = <35 2 36 2 40 2>;
-			};
-
-		};
-
-		enet2: ethernet@b2000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "fsl,etsec2";
-			fsl,num_rx_queues = <0x8>;
-			fsl,num_tx_queues = <0x8>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupt-parent = <&mpic>;
-
-			queue-group@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xb2000 0x1000>;
-				fsl,rx-bit-map = <0xff>;
-				fsl,tx-bit-map = <0xff>;
-				interrupts = <31 2 32 2 33 2>;
-			};
-
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-
-		msi@41600 {
-			compatible = "fsl,p1010-msi", "fsl,mpic-msi";
-			reg = <0x41600 0x80>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe0 0
-				0xe1 0
-				0xe2 0
-				0xe3 0
-				0xe4 0
-				0xe5 0
-				0xe6 0
-				0xe7 0>;
-			interrupt-parent = <&mpic>;
-		};
-
-		global-utilities@e0000 {	//global utilities block
-			compatible = "fsl,p1010-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
-		};
-	};
-
-	pci0: pcie@ffe09000 {
-		compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2";
-		device_type = "pci";
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0 0xffe09000 0 0x1000>;
-		bus-range = <0 255>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <16 2>;
-	};
-
-	pci1: pcie@ffe0a000 {
-		compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2";
-		device_type = "pci";
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0 0xffe0a000 0 0x1000>;
-		bus-range = <0 255>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <16 2>;
-	};
-};
diff --git a/arch/powerpc/boot/dts/p1020rdb.dts b/arch/powerpc/boot/dts/p1020rdb.dts
index d6a8ae4..518bf99 100644
--- a/arch/powerpc/boot/dts/p1020rdb.dts
+++ b/arch/powerpc/boot/dts/p1020rdb.dts
@@ -9,267 +9,33 @@
  * option) any later version.
  */
 
-/include/ "p1020si.dtsi"
-
+/include/ "fsl/p1020si-pre.dtsi"
 / {
 	model = "fsl,P1020RDB";
 	compatible = "fsl,P1020RDB";
 
-	aliases {
-		serial0 = &serial0;
-		serial1 = &serial1;
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		ethernet2 = &enet2;
-		pci0 = &pci0;
-		pci1 = &pci1;
-	};
-
 	memory {
 		device_type = "memory";
 	};
 
-	localbus@ffe05000 {
+	board_lbc: lbc: localbus@ffe05000 {
+		reg = <0 0xffe05000 0 0x1000>;
 
 		/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
 		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
 			  0x1 0x0 0x0 0xffa00000 0x00040000
 			  0x2 0x0 0x0 0xffb00000 0x00020000>;
-
-		nor@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x0 0x0 0x1000000>;
-			bank-width = <2>;
-			device-width = <1>;
-
-			partition@0 {
-				/* This location must not be altered  */
-				/* 256KB for Vitesse 7385 Switch firmware */
-				reg = <0x0 0x00040000>;
-				label = "NOR (RO) Vitesse-7385 Firmware";
-				read-only;
-			};
-
-			partition@40000 {
-				/* 256KB for DTB Image */
-				reg = <0x00040000 0x00040000>;
-				label = "NOR (RO) DTB Image";
-				read-only;
-			};
-
-			partition@80000 {
-				/* 3.5 MB for Linux Kernel Image */
-				reg = <0x00080000 0x00380000>;
-				label = "NOR (RO) Linux Kernel Image";
-				read-only;
-			};
-
-			partition@400000 {
-				/* 11MB for JFFS2 based Root file System */
-				reg = <0x00400000 0x00b00000>;
-				label = "NOR (RW) JFFS2 Root File System";
-			};
-
-			partition@f00000 {
-				/* This location must not be altered  */
-				/* 512KB for u-boot Bootloader Image */
-				/* 512KB for u-boot Environment Variables */
-				reg = <0x00f00000 0x00100000>;
-				label = "NOR (RO) U-Boot Image";
-				read-only;
-			};
-		};
-
-		nand@1,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,p1020-fcm-nand",
-				     "fsl,elbc-fcm-nand";
-			reg = <0x1 0x0 0x40000>;
-
-			partition@0 {
-				/* This location must not be altered  */
-				/* 1MB for u-boot Bootloader Image */
-				reg = <0x0 0x00100000>;
-				label = "NAND (RO) U-Boot Image";
-				read-only;
-			};
-
-			partition@100000 {
-				/* 1MB for DTB Image */
-				reg = <0x00100000 0x00100000>;
-				label = "NAND (RO) DTB Image";
-				read-only;
-			};
-
-			partition@200000 {
-				/* 4MB for Linux Kernel Image */
-				reg = <0x00200000 0x00400000>;
-				label = "NAND (RO) Linux Kernel Image";
-				read-only;
-			};
-
-			partition@600000 {
-				/* 4MB for Compressed Root file System Image */
-				reg = <0x00600000 0x00400000>;
-				label = "NAND (RO) Compressed RFS Image";
-				read-only;
-			};
-
-			partition@a00000 {
-				/* 7MB for JFFS2 based Root file System */
-				reg = <0x00a00000 0x00700000>;
-				label = "NAND (RW) JFFS2 Root File System";
-			};
-
-			partition@1100000 {
-				/* 15MB for JFFS2 based Root file System */
-				reg = <0x01100000 0x00f00000>;
-				label = "NAND (RW) Writable User area";
-			};
-		};
-
-		L2switch@2,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "vitesse-7385";
-			reg = <0x2 0x0 0x20000>;
-		};
-
 	};
 
-	soc@ffe00000 {
-		i2c@3000 {
-			rtc@68 {
-				compatible = "dallas,ds1339";
-				reg = <0x68>;
-			};
-		};
-
-		spi@7000 {
-
-			fsl_m25p80@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "fsl,espi-flash";
-				reg = <0>;
-				linux,modalias = "fsl_m25p80";
-				modal = "s25sl128b";
-				spi-max-frequency = <50000000>;
-				mode = <0>;
-
-				partition@0 {
-					/* 512KB for u-boot Bootloader Image */
-					reg = <0x0 0x00080000>;
-					label = "SPI (RO) U-Boot Image";
-					read-only;
-				};
-
-				partition@80000 {
-					/* 512KB for DTB Image */
-					reg = <0x00080000 0x00080000>;
-					label = "SPI (RO) DTB Image";
-					read-only;
-				};
-
-				partition@100000 {
-					/* 4MB for Linux Kernel Image */
-					reg = <0x00100000 0x00400000>;
-					label = "SPI (RO) Linux Kernel Image";
-					read-only;
-				};
-
-				partition@500000 {
-					/* 4MB for Compressed RFS Image */
-					reg = <0x00500000 0x00400000>;
-					label = "SPI (RO) Compressed RFS Image";
-					read-only;
-				};
-
-				partition@900000 {
-					/* 7MB for JFFS2 based RFS */
-					reg = <0x00900000 0x00700000>;
-					label = "SPI (RW) JFFS2 RFS";
-				};
-			};
-		};
-
-		mdio@24000 {
-
-			phy0: ethernet-phy@0 {
-				interrupt-parent = <&mpic>;
-				interrupts = <3 1>;
-				reg = <0x0>;
-			};
-
-			phy1: ethernet-phy@1 {
-				interrupt-parent = <&mpic>;
-				interrupts = <2 1>;
-				reg = <0x1>;
-			};
-		};
-
-		mdio@25000 {
-
-			tbi0: tbi-phy@11 {
-				reg = <0x11>;
-				device_type = "tbi-phy";
-			};
-		};
-
-		enet0: ethernet@b0000 {
-			fixed-link = <1 1 1000 0 0>;
-			phy-connection-type = "rgmii-id";
-
-		};
-
-		enet1: ethernet@b1000 {
-			phy-handle = <&phy0>;
-			tbi-handle = <&tbi0>;
-			phy-connection-type = "sgmii";
-
-		};
-
-		enet2: ethernet@b2000 {
-			phy-handle = <&phy1>;
-			phy-connection-type = "rgmii-id";
-
-		};
-
-		usb@22000 {
-			phy_type = "ulpi";
-		};
-
-		/* USB2 is shared with localbus, so it must be disabled
-		   by default. We can't put 'status = "disabled";' here
-		   since U-Boot doesn't clear the status property when
-		   it enables USB2. OTOH, U-Boot does create a new node
-		   when there isn't any. So, just comment it out.
-		usb@23000 {
-			phy_type = "ulpi";
-		};
-		*/
-
+	board_soc: soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
 	};
 
 	pci0: pcie@ffe09000 {
 		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x4 0x1
-			0000 0x0 0x0 0x2 &mpic 0x5 0x1
-			0000 0x0 0x0 0x3 &mpic 0x6 0x1
-			0000 0x0 0x0 0x4 &mpic 0x7 0x1
-			>;
+		reg = <0 0xffe09000 0 0x1000>;
 		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
 			ranges = <0x2000000 0x0 0xa0000000
 				  0x2000000 0x0 0xa0000000
 				  0x0 0x20000000
@@ -281,21 +47,10 @@
 	};
 
 	pci1: pcie@ffe0a000 {
+		reg = <0 0xffe0a000 0 0x1000>;
 		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x0 0x1
-			0000 0x0 0x0 0x2 &mpic 0x1 0x1
-			0000 0x0 0x0 0x3 &mpic 0x2 0x1
-			0000 0x0 0x0 0x4 &mpic 0x3 0x1
-			>;
 		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
 			ranges = <0x2000000 0x0 0x80000000
 				  0x2000000 0x0 0x80000000
 				  0x0 0x20000000
@@ -306,3 +61,6 @@
 		};
 	};
 };
+
+/include/ "p1020rdb.dtsi"
+/include/ "fsl/p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1020rdb.dtsi b/arch/powerpc/boot/dts/p1020rdb.dtsi
new file mode 100644
index 0000000..b5bd86f
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1020rdb.dtsi
@@ -0,0 +1,247 @@
+/*
+ * P1020 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x1000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 256KB for Vitesse 7385 Switch firmware */
+			reg = <0x0 0x00040000>;
+			label = "NOR (RO) Vitesse-7385 Firmware";
+			read-only;
+		};
+
+		partition@40000 {
+			/* 256KB for DTB Image */
+			reg = <0x00040000 0x00040000>;
+			label = "NOR (RO) DTB Image";
+			read-only;
+		};
+
+		partition@80000 {
+			/* 3.5 MB for Linux Kernel Image */
+			reg = <0x00080000 0x00380000>;
+			label = "NOR (RO) Linux Kernel Image";
+			read-only;
+		};
+
+		partition@400000 {
+			/* 11MB for JFFS2 based Root file System */
+			reg = <0x00400000 0x00b00000>;
+			label = "NOR (RW) JFFS2 Root File System";
+		};
+
+		partition@f00000 {
+			/* This location must not be altered  */
+			/* 512KB for u-boot Bootloader Image */
+			/* 512KB for u-boot Environment Variables */
+			reg = <0x00f00000 0x00100000>;
+			label = "NOR (RO) U-Boot Image";
+			read-only;
+		};
+	};
+
+	nand@1,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,p1020-fcm-nand",
+			     "fsl,elbc-fcm-nand";
+		reg = <0x1 0x0 0x40000>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 1MB for u-boot Bootloader Image */
+			reg = <0x0 0x00100000>;
+			label = "NAND (RO) U-Boot Image";
+			read-only;
+		};
+
+		partition@100000 {
+			/* 1MB for DTB Image */
+			reg = <0x00100000 0x00100000>;
+			label = "NAND (RO) DTB Image";
+			read-only;
+		};
+
+		partition@200000 {
+			/* 4MB for Linux Kernel Image */
+			reg = <0x00200000 0x00400000>;
+			label = "NAND (RO) Linux Kernel Image";
+			read-only;
+		};
+
+		partition@600000 {
+			/* 4MB for Compressed Root file System Image */
+			reg = <0x00600000 0x00400000>;
+			label = "NAND (RO) Compressed RFS Image";
+			read-only;
+		};
+
+		partition@a00000 {
+			/* 7MB for JFFS2 based Root file System */
+			reg = <0x00a00000 0x00700000>;
+			label = "NAND (RW) JFFS2 Root File System";
+		};
+
+		partition@1100000 {
+			/* 15MB for JFFS2 based Root file System */
+			reg = <0x01100000 0x00f00000>;
+			label = "NAND (RW) Writable User area";
+		};
+	};
+
+	L2switch@2,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "vitesse-7385";
+		reg = <0x2 0x0 0x20000>;
+	};
+};
+
+&board_soc {
+	i2c@3000 {
+		rtc@68 {
+			compatible = "dallas,ds1339";
+			reg = <0x68>;
+		};
+	};
+
+	spi@7000 {
+		flash@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "spansion,s25sl12801";
+			reg = <0>;
+			spi-max-frequency = <40000000>; /* input clock */
+
+			partition@u-boot {
+				/* 512KB for u-boot Bootloader Image */
+				reg = <0x0 0x00080000>;
+				label = "u-boot";
+				read-only;
+			};
+
+			partition@dtb {
+				/* 512KB for DTB Image */
+				reg = <0x00080000 0x00080000>;
+				label = "dtb";
+				read-only;
+			};
+
+			partition@kernel {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00100000 0x00400000>;
+				label = "kernel";
+				read-only;
+			};
+
+			partition@fs {
+				/* 4MB for Compressed RFS Image */
+				reg = <0x00500000 0x00400000>;
+				label = "file system";
+				read-only;
+			};
+
+			partition@jffs-fs {
+				/* 7MB for JFFS2 based RFS */
+				reg = <0x00900000 0x00700000>;
+				label = "file system jffs2";
+			};
+		};
+	};
+
+	usb@22000 {
+		phy_type = "ulpi";
+	};
+
+	/* USB2 is shared with localbus, so it must be disabled
+	   by default. We can't put 'status = "disabled";' here
+	   since U-Boot doesn't clear the status property when
+	   it enables USB2. OTOH, U-Boot does create a new node
+	   when there isn't any. So, just comment it out.
+	usb@23000 {
+		phy_type = "ulpi";
+	};
+	*/
+
+	mdio@24000 {
+		phy0: ethernet-phy@0 {
+			interrupt-parent = <&mpic>;
+			interrupts = <3 1>;
+			reg = <0x0>;
+		};
+
+		phy1: ethernet-phy@1 {
+			interrupt-parent = <&mpic>;
+			interrupts = <2 1>;
+			reg = <0x1>;
+		};
+
+		tbi-phy@2 {
+			device_type = "tbi-phy";
+			reg = <0x2>;
+		};
+	};
+
+	mdio@25000 {
+		tbi0: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet0: ethernet@b0000 {
+		fixed-link = <1 1 1000 0 0>;
+		phy-connection-type = "rgmii-id";
+
+	};
+
+	enet1: ethernet@b1000 {
+		phy-handle = <&phy0>;
+		tbi-handle = <&tbi0>;
+		phy-connection-type = "sgmii";
+	};
+
+	enet2: ethernet@b2000 {
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+};
diff --git a/arch/powerpc/boot/dts/p1020rdb_36b.dts b/arch/powerpc/boot/dts/p1020rdb_36b.dts
new file mode 100644
index 0000000..bdbdb60
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1020rdb_36b.dts
@@ -0,0 +1,66 @@
+/*
+ * P1020 RDB Device Tree Source (36-bit address map)
+ *
+ * Copyright 2009-2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "fsl/p1020si-pre.dtsi"
+/ {
+	model = "fsl,P1020RDB";
+	compatible = "fsl,P1020RDB";
+
+	memory {
+		device_type = "memory";
+	};
+
+	board_lbc: lbc: localbus@fffe05000 {
+		reg = <0xf 0xffe05000 0 0x1000>;
+
+		/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
+		ranges = <0x0 0x0 0xf 0xef000000 0x01000000
+			  0x1 0x0 0xf 0xffa00000 0x00040000
+			  0x2 0x0 0xf 0xffb00000 0x00020000>;
+	};
+
+	board_soc: soc: soc@fffe00000 {
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@fffe09000 {
+		reg = <0xf 0xffe09000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@fffe0a000 {
+		reg = <0xf 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p1020rdb.dtsi"
+/include/ "fsl/p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts b/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts
index f0bf7f4..41b4585 100644
--- a/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts
+++ b/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts
@@ -16,7 +16,7 @@
  * option) any later version.
  */
 
-/include/ "p1020si.dtsi"
+/include/ "p1020rdb.dts"
 
 / {
 	model = "fsl,P1020RDB";
@@ -32,7 +32,7 @@
 
 	cpus {
 		PowerPC,P1020@1 {
-		status = "disabled";
+			status = "disabled";
 		};
 	};
 
@@ -45,169 +45,19 @@
 	};
 
 	soc@ffe00000 {
-		i2c@3000 {
-			rtc@68 {
-				compatible = "dallas,ds1339";
-				reg = <0x68>;
-			};
-		};
-
 		serial1: serial@4600 {
 			status = "disabled";
 		};
 
-		spi@7000 {
-			fsl_m25p80@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "fsl,espi-flash";
-				reg = <0>;
-				linux,modalias = "fsl_m25p80";
-				spi-max-frequency = <40000000>;
-
-				partition@0 {
-					/* 512KB for u-boot Bootloader Image */
-					reg = <0x0 0x00080000>;
-					label = "SPI (RO) U-Boot Image";
-					read-only;
-				};
-
-				partition@80000 {
-					/* 512KB for DTB Image */
-					reg = <0x00080000 0x00080000>;
-					label = "SPI (RO) DTB Image";
-					read-only;
-				};
-
-				partition@100000 {
-					/* 4MB for Linux Kernel Image */
-					reg = <0x00100000 0x00400000>;
-					label = "SPI (RO) Linux Kernel Image";
-					read-only;
-				};
-
-				partition@500000 {
-					/* 4MB for Compressed RFS Image */
-					reg = <0x00500000 0x00400000>;
-					label = "SPI (RO) Compressed RFS Image";
-					read-only;
-				};
-
-				partition@900000 {
-					/* 7MB for JFFS2 based RFS */
-					reg = <0x00900000 0x00700000>;
-					label = "SPI (RW) JFFS2 RFS";
-				};
-			};
-		};
-
-		mdio@24000 {
-			phy0: ethernet-phy@0 {
-				interrupt-parent = <&mpic>;
-				interrupts = <3 1>;
-				reg = <0x0>;
-			};
-			phy1: ethernet-phy@1 {
-				interrupt-parent = <&mpic>;
-				interrupts = <2 1>;
-				reg = <0x1>;
-			};
-		};
-
-		mdio@25000 {
-			tbi0: tbi-phy@11 {
-				reg = <0x11>;
-				device_type = "tbi-phy";
-			};
-		};
-
 		enet0: ethernet@b0000 {
 			status = "disabled";
 		};
 
-		enet1: ethernet@b1000 {
-			phy-handle = <&phy0>;
-			tbi-handle = <&tbi0>;
-			phy-connection-type = "sgmii";
-		};
-
-		enet2: ethernet@b2000 {
-			phy-handle = <&phy1>;
-			phy-connection-type = "rgmii-id";
-		};
-
-		usb@22000 {
-			phy_type = "ulpi";
-		};
-
-		/* USB2 is shared with localbus, so it must be disabled
-		   by default. We can't put 'status = "disabled";' here
-		   since U-Boot doesn't clear the status property when
-		   it enables USB2. OTOH, U-Boot does create a new node
-		   when there isn't any. So, just comment it out.
-		usb@23000 {
-			phy_type = "ulpi";
-		};
-		*/
-
 		mpic: pic@40000 {
 			protected-sources = <
 			42 29 30 34	/* serial1, enet0-queue-group0 */
 			17 18 24 45	/* enet0-queue-group1, crypto */
 			>;
 		};
-
-	};
-
-	pci0: pcie@ffe09000 {
-		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x4 0x1
-			0000 0x0 0x0 0x2 &mpic 0x5 0x1
-			0000 0x0 0x0 0x3 &mpic 0x6 0x1
-			0000 0x0 0x0 0x4 &mpic 0x7 0x1
-			>;
-		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			ranges = <0x2000000 0x0 0xa0000000
-				  0x2000000 0x0 0xa0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	pci1: pcie@ffe0a000 {
-		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x0 0x1
-			0000 0x0 0x0 0x2 &mpic 0x1 0x1
-			0000 0x0 0x0 0x3 &mpic 0x2 0x1
-			0000 0x0 0x0 0x4 &mpic 0x3 0x1
-			>;
-		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			ranges = <0x2000000 0x0 0x80000000
-				  0x2000000 0x0 0x80000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts b/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts
index 6ec0220..5174538 100644
--- a/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts
+++ b/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts
@@ -15,7 +15,7 @@
  * option) any later version.
  */
 
-/include/ "p1020si.dtsi"
+/include/ "p1020rdb.dts"
 
 / {
 	model = "fsl,P1020RDB";
@@ -28,7 +28,7 @@
 
 	cpus {
 		PowerPC,P1020@0 {
-		status = "disabled";
+			status = "disabled";
 		};
 	};
 
@@ -85,12 +85,6 @@
 			status = "disabled";
 		};
 
-		enet0: ethernet@b0000 {
-			fixed-link = <1 1 1000 0 0>;
-			phy-connection-type = "rgmii-id";
-
-		};
-
 		enet1: ethernet@b1000 {
 			status = "disabled";
 		};
@@ -135,7 +129,6 @@
 		global-utilities@e0000 {	//global utilities block
 			status = "disabled";
 		};
-
 	};
 
 	pci0: pcie@ffe09000 {
diff --git a/arch/powerpc/boot/dts/p1020si.dtsi b/arch/powerpc/boot/dts/p1020si.dtsi
deleted file mode 100644
index 5c5acb6..0000000
--- a/arch/powerpc/boot/dts/p1020si.dtsi
+++ /dev/null
@@ -1,377 +0,0 @@
-/*
- * P1020si Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-/ {
-	compatible = "fsl,P1020";
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,P1020@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			next-level-cache = <&L2>;
-		};
-
-		PowerPC,P1020@1 {
-			device_type = "cpu";
-			reg = <0x1>;
-			next-level-cache = <&L2>;
-		};
-	};
-
-	localbus@ffe05000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus";
-		reg = <0 0xffe05000 0 0x1000>;
-		interrupts = <19 2>;
-		interrupt-parent = <&mpic>;
-	};
-
-	soc@ffe00000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "fsl,p1020-immr", "simple-bus";
-		ranges = <0x0  0x0 0xffe00000 0x100000>;
-		bus-frequency = <0>;		// Filled out by uboot.
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <12>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,p1020-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <16 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,p1020-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		spi@7000 {
-			cell-index = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,espi";
-			reg = <0x7000 0x1000>;
-			interrupts = <59 0x2>;
-			interrupt-parent = <&mpic>;
-			mode = "cpu";
-		};
-
-		gpio: gpio-controller@f000 {
-			#gpio-cells = <2>;
-			compatible = "fsl,mpc8572-gpio";
-			reg = <0xf000 0x100>;
-			interrupts = <47 0x2>;
-			interrupt-parent = <&mpic>;
-			gpio-controller;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,p1020-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;	// 32 bytes
-			cache-size = <0x40000>; // L2,256K
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		mdio@24000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,etsec2-mdio";
-			reg = <0x24000 0x1000 0xb0030 0x4>;
-
-		};
-
-		mdio@25000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,etsec2-tbi";
-			reg = <0x25000 0x1000 0xb1030 0x4>;
-
-		};
-
-		enet0: ethernet@b0000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "fsl,etsec2";
-			fsl,num_rx_queues = <0x8>;
-			fsl,num_tx_queues = <0x8>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupt-parent = <&mpic>;
-
-			queue-group@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xb0000 0x1000>;
-				interrupts = <29 2 30 2 34 2>;
-			};
-
-			queue-group@1 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xb4000 0x1000>;
-				interrupts = <17 2 18 2 24 2>;
-			};
-		};
-
-		enet1: ethernet@b1000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "fsl,etsec2";
-			fsl,num_rx_queues = <0x8>;
-			fsl,num_tx_queues = <0x8>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupt-parent = <&mpic>;
-
-			queue-group@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xb1000 0x1000>;
-				interrupts = <35 2 36 2 40 2>;
-			};
-
-			queue-group@1 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xb5000 0x1000>;
-				interrupts = <51 2 52 2 67 2>;
-			};
-		};
-
-		enet2: ethernet@b2000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "fsl,etsec2";
-			fsl,num_rx_queues = <0x8>;
-			fsl,num_tx_queues = <0x8>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupt-parent = <&mpic>;
-
-			queue-group@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xb2000 0x1000>;
-				interrupts = <31 2 32 2 33 2>;
-			};
-
-			queue-group@1 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xb6000 0x1000>;
-				interrupts = <25 2 26 2 27 2>;
-			};
-		};
-
-		usb@22000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl-usb2-dr";
-			reg = <0x22000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <28 0x2>;
-		};
-
-		/* USB2 is shared with localbus, so it must be disabled
-		   by default. We can't put 'status = "disabled";' here
-		   since U-Boot doesn't clear the status property when
-		   it enables USB2. OTOH, U-Boot does create a new node
-		   when there isn't any. So, just comment it out.
-		usb@23000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl-usb2-dr";
-			reg = <0x23000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <46 0x2>;
-			phy_type = "ulpi";
-		};
-		*/
-
-		sdhci@2e000 {
-			compatible = "fsl,p1020-esdhc", "fsl,esdhc";
-			reg = <0x2e000 0x1000>;
-			interrupts = <72 0x2>;
-			interrupt-parent = <&mpic>;
-			/* Filled in by U-Boot */
-			clock-frequency = <0>;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
-				     "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <45 2 58 2>;
-			interrupt-parent = <&mpic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0xbfe>;
-			fsl,descriptor-types-mask = <0x3ab0ebf>;
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-
-		msi@41600 {
-			compatible = "fsl,p1020-msi", "fsl,mpic-msi";
-			reg = <0x41600 0x80>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe0 0
-				0xe1 0
-				0xe2 0
-				0xe3 0
-				0xe4 0
-				0xe5 0
-				0xe6 0
-				0xe7 0>;
-			interrupt-parent = <&mpic>;
-		};
-
-		global-utilities@e0000 {	//global utilities block
-			compatible = "fsl,p1020-guts","fsl,p2020-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
-		};
-	};
-
-	pci0: pcie@ffe09000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0 0xffe09000 0 0x1000>;
-		bus-range = <0 255>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <16 2>;
-	};
-
-	pci1: pcie@ffe0a000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0 0xffe0a000 0 0x1000>;
-		bus-range = <0 255>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <16 2>;
-	};
-};
diff --git a/arch/powerpc/boot/dts/p1021mds.dts b/arch/powerpc/boot/dts/p1021mds.dts
index ad5b852..d954079 100644
--- a/arch/powerpc/boot/dts/p1021mds.dts
+++ b/arch/powerpc/boot/dts/p1021mds.dts
@@ -9,53 +9,22 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "fsl/p1021si-pre.dtsi"
 / {
 	model = "fsl,P1021";
 	compatible = "fsl,P1021MDS";
-	#address-cells = <2>;
-	#size-cells = <2>;
 
 	aliases {
-		serial0 = &serial0;
-		serial1 = &serial1;
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		ethernet2 = &enet2;
 		ethernet3 = &enet3;
 		ethernet4 = &enet4;
-		pci0 = &pci0;
-		pci1 = &pci1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,P1021@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			next-level-cache = <&L2>;
-		};
-
-		PowerPC,P1021@1 {
-			device_type = "cpu";
-			reg = <0x1>;
-			next-level-cache = <&L2>;
-		};
 	};
 
 	memory {
 		device_type = "memory";
 	};
 
-	localbus@ffe05000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus";
-		reg = <0 0xffe05000 0 0x1000>;
-		interrupts = <19 2>;
-		interrupt-parent = <&mpic>;
+	lbc: localbus@ffe05000 {
+		reg = <0x0 0xffe05000 0x0 0x1000>;
 
 		/* NAND Flash, BCSR, PMC0/1*/
 		ranges = <0x0 0x0 0x0 0xfc000000 0x02000000
@@ -138,99 +107,26 @@
 		};
 	};
 
-	soc@ffe00000 {
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
+	soc: soc@ffe00000 {
 		compatible = "fsl,p1021-immr", "simple-bus";
-		ranges = <0x0  0x0 0xffe00000 0x100000>;
-		bus-frequency = <0>;		// Filled out by uboot.
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <12>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,p1021-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <16 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,p1021-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
 
 		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
 			rtc@68 {
 				compatible = "dallas,ds1374";
 				reg = <0x68>;
 			};
 		};
 
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
 		spi@7000 {
-			cell-index = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,espi";
-			reg = <0x7000 0x1000>;
-			interrupts = <59 0x2>;
-			interrupt-parent = <&mpic>;
-			espi,num-ss-bits = <4>;
-			mode = "cpu";
-
-			fsl_m25p80@0 {
+
+			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "fsl,espi-flash";
+				compatible = "spansion,s25sl12801";
 				reg = <0>;
-				linux,modalias = "fsl_m25p80";
 				spi-max-frequency = <40000000>; /* input clock */
+
 				partition@u-boot {
 					label = "u-boot-spi";
 					reg = <0x00000000 0x00100000>;
@@ -253,237 +149,49 @@
 			};
 		};
 
-		gpio: gpio-controller@f000 {
-			#gpio-cells = <2>;
-			compatible = "fsl,mpc8572-gpio";
-			reg = <0xf000 0x100>;
-			interrupts = <47 0x2>;
-			interrupt-parent = <&mpic>;
-			gpio-controller;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,p1021-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;	// 32 bytes
-			cache-size = <0x40000>; // L2,256K
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
 		usb@22000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl-usb2-dr";
-			reg = <0x22000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <28 0x2>;
 			phy_type = "ulpi";
 		};
 
-		 mdio@24000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,etsec2-mdio";
-			reg = <0x24000 0x1000 0xb0030 0x4>;
-
+		mdio@24000 {
 			phy0: ethernet-phy@0 {
-				interrupt-parent = <&mpic>;
-				interrupts = <1 1>;
+				interrupts = <1 1 0 0>;
 				reg = <0x0>;
 			};
 			phy1: ethernet-phy@1 {
-				interrupt-parent = <&mpic>;
-				interrupts = <2 1>;
+				interrupts = <2 1 0 0>;
 				reg = <0x1>;
 			};
 			phy4: ethernet-phy@4 {
-				interrupt-parent = <&mpic>;
 				reg = <0x4>;
 			};
+			tbi-phy@5 {
+				device_type = "tbi-phy";
+				reg = <0x5>;
+			};
 		};
 
 		mdio@25000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,etsec2-tbi";
-			reg = <0x25000 0x1000 0xb1030 0x4>;
 			tbi0: tbi-phy@11 {
 				reg = <0x11>;
 				device_type = "tbi-phy";
 			};
 		};
 
-		enet0: ethernet@B0000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "fsl,etsec2";
-			fsl,num_rx_queues = <0x8>;
-			fsl,num_tx_queues = <0x8>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupt-parent = <&mpic>;
+		ethernet@b0000 {
 			phy-handle = <&phy0>;
 			phy-connection-type = "rgmii-id";
-			queue-group@0{
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xB0000 0x1000>;
-				interrupts = <29 2 30 2 34 2>;
-			};
-			queue-group@1{
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xB4000 0x1000>;
-				interrupts = <17 2 18 2 24 2>;
-			};
 		};
 
-		enet1: ethernet@B1000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "fsl,etsec2";
-			fsl,num_rx_queues = <0x8>;
-			fsl,num_tx_queues = <0x8>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupt-parent = <&mpic>;
+		ethernet@b1000 {
 			phy-handle = <&phy4>;
 			tbi-handle = <&tbi0>;
 			phy-connection-type = "sgmii";
-			queue-group@0{
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xB1000 0x1000>;
-				interrupts = <35 2 36 2 40 2>;
-			};
-			queue-group@1{
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xB5000 0x1000>;
-				interrupts = <51 2 52 2 67 2>;
-			};
 		};
 
-		enet2: ethernet@B2000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "fsl,etsec2";
-			fsl,num_rx_queues = <0x8>;
-			fsl,num_tx_queues = <0x8>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupt-parent = <&mpic>;
+		ethernet@b2000 {
 			phy-handle = <&phy1>;
 			phy-connection-type = "rgmii-id";
-			queue-group@0{
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xB2000 0x1000>;
-				interrupts = <31 2 32 2 33 2>;
-			};
-			queue-group@1{
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xB6000 0x1000>;
-				interrupts = <25 2 26 2 27 2>;
-			};
-		};
-
-		sdhci@2e000 {
-			compatible = "fsl,p1021-esdhc", "fsl,esdhc";
-			reg = <0x2e000 0x1000>;
-			interrupts = <72 0x2>;
-			interrupt-parent = <&mpic>;
-			/* Filled in by U-Boot */
-			clock-frequency = <0>;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec3.3", "fsl,sec3.1",
-				     "fsl,sec3.0", "fsl,sec2.4",
-				     "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <45 2 58 2>;
-			interrupt-parent = <&mpic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0x97c>;
-			fsl,descriptor-types-mask = <0x3a30abf>;
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-
-		msi@41600 {
-			compatible = "fsl,p1021-msi", "fsl,mpic-msi";
-			reg = <0x41600 0x80>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe0 0
-				0xe1 0
-				0xe2 0
-				0xe3 0
-				0xe4 0
-				0xe5 0
-				0xe6 0
-				0xe7 0>;
-			interrupt-parent = <&mpic>;
-		};
-
-		global-utilities@e0000 {	//global utilities block
-			compatible = "fsl,p1021-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
 		};
 
 		par_io@e0100 {
@@ -499,8 +207,7 @@
 					0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
 					0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
 					0x0  0x17 0x2  0x0  0x2  0x0    /* CLK12 */
-					0x0  0x18 0x2  0x0  0x1  0x0    /* CLK9
-*/
+					0x0  0x18 0x2  0x0  0x1  0x0    /* CLK9 */
 					0x0  0x7  0x1  0x0  0x2  0x0    /* ENET1_TXD0_SER1_TXD0 */
 					0x0  0x9  0x1  0x0  0x2  0x0    /* ENET1_TXD1_SER1_TXD1 */
 					0x0  0xb  0x1  0x0  0x2  0x0    /* ENET1_TXD2_SER1_TXD2 */
@@ -535,31 +242,10 @@
 	};
 
 	pci0: pcie@ffe09000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
 		reg = <0 0xffe09000 0 0x1000>;
-		bus-range = <0 255>;
 		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <16 2>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 4 1
-			0000 0 0 2 &mpic 5 1
-			0000 0 0 3 &mpic 6 1
-			0000 0 0 4 &mpic 7 1
-			>;
 		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
 			ranges = <0x2000000 0x0 0xa0000000
 				  0x2000000 0x0 0xa0000000
 				  0x0 0x20000000
@@ -571,31 +257,10 @@
 	};
 
 	pci1: pcie@ffe0a000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
 		reg = <0 0xffe0a000 0 0x1000>;
-		bus-range = <0 255>;
 		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <16 2>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 0 1
-			0000 0 0 2 &mpic 1 1
-			0000 0 0 3 &mpic 2 1
-			0000 0 0 4 &mpic 3 1
-			>;
 		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
 			ranges = <0x2000000 0x0 0xc0000000
 				  0x2000000 0x0 0xc0000000
 				  0x0 0x20000000
@@ -606,36 +271,16 @@
 		};
 	};
 
-	qe@ffe80000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "qe";
-		compatible = "fsl,qe";
+	qe: qe@ffe80000 {
 		ranges = <0x0 0x0 0xffe80000 0x40000>;
 		reg = <0 0xffe80000 0 0x480>;
 		brg-frequency = <0>;
 		bus-frequency = <0>;
-		fsl,qe-num-riscs = <1>;
-		fsl,qe-num-snums = <28>;
 		status = "disabled"; /* no firmware loaded */
 
-		qeic: interrupt-controller@80 {
-			interrupt-controller;
-			compatible = "fsl,qe-ic";
-			#address-cells = <0>;
-			#interrupt-cells = <1>;
-			reg = <0x80 0x80>;
-			interrupts = <63 2 60 2>; //high:47 low:44
-			interrupt-parent = <&mpic>;
-		};
-
 		enet3: ucc@2000 {
 			device_type = "network";
 			compatible = "ucc_geth";
-			cell-index = <1>;
-			reg = <0x2000 0x200>;
-			interrupts = <32>;
-			interrupt-parent = <&qeic>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			rx-clock-name = "clk12";
 			tx-clock-name = "clk9";
@@ -645,20 +290,15 @@
 		};
 
 		mdio@2120 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x2120 0x18>;
-			compatible = "fsl,ucc-mdio";
-
 			qe_phy0: ethernet-phy@0 {
 				interrupt-parent = <&mpic>;
-				interrupts = <4 1>;
+				interrupts = <4 1 0 0>;
 				reg = <0x0>;
 				device_type = "ethernet-phy";
 			};
 			qe_phy1: ethernet-phy@03 {
 				interrupt-parent = <&mpic>;
-				interrupts = <5 1>;
+				interrupts = <5 1 0 0>;
 				reg = <0x3>;
 				device_type = "ethernet-phy";
 			};
@@ -671,10 +311,6 @@
 		enet4: ucc@2400 {
 			device_type = "network";
 			compatible = "ucc_geth";
-			cell-index = <5>;
-			reg = <0x2400 0x200>;
-			interrupts = <40>;
-			interrupt-parent = <&qeic>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			rx-clock-name = "none";
 			tx-clock-name = "clk13";
@@ -682,18 +318,7 @@
 			phy-handle = <&qe_phy1>;
 			phy-connection-type = "rmii";
 		};
-
-		muram@10000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,qe-muram", "fsl,cpm-muram";
-			ranges = <0x0 0x10000 0x6000>;
-
-			data-only@0 {
-				compatible = "fsl,qe-muram-data",
-				"fsl,cpm-muram-data";
-				reg = <0x0 0x6000>;
-			};
-		};
 	};
 };
+
+/include/ "fsl/p1021si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1022ds.dts b/arch/powerpc/boot/dts/p1022ds.dts
index b9b8719..ef95717 100644
--- a/arch/powerpc/boot/dts/p1022ds.dts
+++ b/arch/powerpc/boot/dts/p1022ds.dts
@@ -8,57 +8,36 @@
  * kind, whether express or implied.
  */
 
-/dts-v1/;
+/include/ "fsl/p1022si-pre.dtsi"
 / {
-	model = "fsl,P1022";
+	model = "fsl,P1022DS";
 	compatible = "fsl,P1022DS";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		pci2 = &pci2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,P1022@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			next-level-cache = <&L2>;
-		};
-
-		PowerPC,P1022@1 {
-			device_type = "cpu";
-			reg = <0x1>;
-			next-level-cache = <&L2>;
-		};
-	};
 
 	memory {
 		device_type = "memory";
 	};
 
-	localbus@fffe05000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus";
-		reg = <0 0xffe05000 0 0x1000>;
-		interrupts = <19 2 0 0>;
-
+	lbc: localbus@fffe05000 {
+		reg = <0xf 0xffe05000 0 0x1000>;
 		ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
 			  0x1 0x0 0xf 0xe0000000 0x08000000
-			  0x2 0x0 0x0 0xffa00000 0x00040000
+			  0x2 0x0 0xf 0xff800000 0x00040000
 			  0x3 0x0 0xf 0xffdf0000 0x00008000>;
 
+		/*
+		 * This node is used to access the pixis via "indirect" mode,
+		 * which is done by writing the pixis register index to chip
+		 * select 0 and the value to/from chip select 1.  Indirect
+		 * mode is the only way to access the pixis when DIU video
+		 * is enabled.  Note that this assumes that the first column
+		 * of the 'ranges' property above is the chip select number.
+		 */
+		board-control@0,0 {
+			compatible = "fsl,p1022ds-indirect-pixis";
+			reg = <0x0 0x0 1	/* CS0 */
+			       0x1 0x0 1>;	/* CS1 */
+		};
+
 		nor@0,0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -161,51 +140,10 @@
 		};
 	};
 
-	soc@fffe00000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "fsl,p1022-immr", "simple-bus";
+	soc: soc@fffe00000 {
 		ranges = <0x0 0xf 0xffe00000 0x100000>;
-		bus-frequency = <0>;		// Filled out by uboot.
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <12>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,p1022-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <16 2 0 0>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,p1022-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupts = <16 2 0 0>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2 0 0>;
-			dfsrr;
-		};
 
 		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 2 0 0>;
-			dfsrr;
-
 			wm8776:codec@1a {
 				compatible = "wlf,wm8776";
 				reg = <0x1a>;
@@ -216,41 +154,14 @@
 			};
 		};
 
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2 0 0>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2 0 0>;
-		};
-
 		spi@7000 {
-			cell-index = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,espi";
-			reg = <0x7000 0x1000>;
-			interrupts = <59 0x2 0 0>;
-			espi,num-ss-bits = <4>;
-			mode = "cpu";
-
-			fsl_m25p80@0 {
+			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "fsl,espi-flash";
+				compatible = "spansion,s25sl12801";
 				reg = <0>;
-				linux,modalias = "fsl_m25p80";
 				spi-max-frequency = <40000000>; /* input clock */
+
 				partition@0 {
 					label = "u-boot-spi";
 					reg = <0x00000000 0x00100000>;
@@ -274,115 +185,20 @@
 		};
 
 		ssi@15000 {
-			compatible = "fsl,mpc8610-ssi";
-			cell-index = <0>;
-			reg = <0x15000 0x100>;
-			interrupts = <75 2 0 0>;
 			fsl,mode = "i2s-slave";
 			codec-handle = <&wm8776>;
-			fsl,playback-dma = <&dma00>;
-			fsl,capture-dma = <&dma01>;
-			fsl,fifo-depth = <15>;
 			fsl,ssi-asynchronous;
 		};
 
-		dma@c300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,eloplus-dma";
-			reg = <0xc300 0x4>;
-			ranges = <0x0 0xc100 0x200>;
-			cell-index = <1>;
-			dma00: dma-channel@0 {
-				compatible = "fsl,ssi-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupts = <76 2 0 0>;
-			};
-			dma01: dma-channel@80 {
-				compatible = "fsl,ssi-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupts = <77 2 0 0>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupts = <78 2 0 0>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupts = <79 2 0 0>;
-			};
-		};
-
-		gpio: gpio-controller@f000 {
-			#gpio-cells = <2>;
-			compatible = "fsl,mpc8572-gpio";
-			reg = <0xf000 0x100>;
-			interrupts = <47 0x2 0 0>;
-			gpio-controller;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,p1022-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;	// 32 bytes
-			cache-size = <0x40000>; // L2, 256K
-			interrupts = <16 2 0 0>;
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupts = <20 2 0 0>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupts = <21 2 0 0>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupts = <22 2 0 0>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupts = <23 2 0 0>;
-			};
-		};
-
 		usb@22000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl-usb2-dr";
-			reg = <0x22000 0x1000>;
-			interrupts = <28 0x2 0 0>;
 			phy_type = "ulpi";
 		};
 
-		mdio@24000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,etsec2-mdio";
-			reg = <0x24000 0x1000 0xb0030 0x4>;
+		usb@23000 {
+			status = "disabled";
+		};
 
+		mdio@24000 {
 			phy0: ethernet-phy@0 {
 				interrupts = <3 1 0 0>;
 				reg = <0x1>;
@@ -391,189 +207,28 @@
 				interrupts = <9 1 0 0>;
 				reg = <0x2>;
 			};
+			tbi-phy@2 {
+				device_type = "tbi-phy";
+				reg = <0x2>;
+			};
 		};
 
-		mdio@25000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,etsec2-mdio";
-			reg = <0x25000 0x1000 0xb1030 0x4>;
-		};
-
-		enet0: ethernet@B0000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "fsl,etsec2";
-			fsl,num_rx_queues = <0x8>;
-			fsl,num_tx_queues = <0x8>;
-			fsl,magic-packet;
-			fsl,wake-on-filer;
-			local-mac-address = [ 00 00 00 00 00 00 ];
+		ethernet@b0000 {
 			phy-handle = <&phy0>;
 			phy-connection-type = "rgmii-id";
-			queue-group@0{
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xB0000 0x1000>;
-				interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
-			};
-			queue-group@1{
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xB4000 0x1000>;
-				interrupts = <17 2 0 0 18 2 0 0 24 2 0 0>;
-			};
 		};
 
-		enet1: ethernet@B1000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "fsl,etsec2";
-			fsl,num_rx_queues = <0x8>;
-			fsl,num_tx_queues = <0x8>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
+		ethernet@b1000 {
 			phy-handle = <&phy1>;
 			phy-connection-type = "rgmii-id";
-			queue-group@0{
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xB1000 0x1000>;
-				interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
-			};
-			queue-group@1{
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xB5000 0x1000>;
-				interrupts = <51 2 0 0 52 2 0 0 67 2 0 0>;
-			};
-		};
-
-		sdhci@2e000 {
-			compatible = "fsl,p1022-esdhc", "fsl,esdhc";
-			reg = <0x2e000 0x1000>;
-			interrupts = <72 0x2 0 0>;
-			fsl,sdhci-auto-cmd12;
-			/* Filled in by U-Boot */
-			clock-frequency = <0>;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
-				     "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
-				     "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <45 2 0 0 58 2 0 0>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0x97c>;
-			fsl,descriptor-types-mask = <0x3a30abf>;
-		};
-
-		sata@18000 {
-			compatible = "fsl,p1022-sata", "fsl,pq-sata-v2";
-			reg = <0x18000 0x1000>;
-			cell-index = <1>;
-			interrupts = <74 0x2 0 0>;
-		};
-
-		sata@19000 {
-			compatible = "fsl,p1022-sata", "fsl,pq-sata-v2";
-			reg = <0x19000 0x1000>;
-			cell-index = <2>;
-			interrupts = <41 0x2 0 0>;
-		};
-
-		power@e0070{
-			compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc";
-			reg = <0xe0070 0x20>;
-		};
-
-		display@10000 {
-			compatible = "fsl,diu", "fsl,p1022-diu";
-			reg = <0x10000 1000>;
-			interrupts = <64 2 0 0>;
-		};
-
-		timer@41100 {
-			compatible = "fsl,mpic-global-timer";
-			reg = <0x41100 0x100 0x41300 4>;
-			interrupts = <0 0 3 0
-			              1 0 3 0
-			              2 0 3 0
-			              3 0 3 0>;
-		};
-
-		timer@42100 {
-			compatible = "fsl,mpic-global-timer";
-			reg = <0x42100 0x100 0x42300 4>;
-			interrupts = <4 0 3 0
-			              5 0 3 0
-			              6 0 3 0
-			              7 0 3 0>;
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <4>;
-			reg = <0x40000 0x40000>;
-			compatible = "fsl,mpic";
-			device_type = "open-pic";
-		};
-
-		msi@41600 {
-			compatible = "fsl,p1022-msi", "fsl,mpic-msi";
-			reg = <0x41600 0x80>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe0 0 0 0
-				0xe1 0 0 0
-				0xe2 0 0 0
-				0xe3 0 0 0
-				0xe4 0 0 0
-				0xe5 0 0 0
-				0xe6 0 0 0
-				0xe7 0 0 0>;
-		};
-
-		global-utilities@e0000 {	//global utilities block
-			compatible = "fsl,p1022-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
 		};
 	};
 
 	pci0: pcie@fffe09000 {
-		compatible = "fsl,p1022-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
 		reg = <0xf 0xffe09000 0 0x1000>;
-		bus-range = <0 255>;
-		ranges = <0x2000000 0x0 0xa0000000 0xc 0x20000000 0x0 0x20000000
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
-		clock-frequency = <33333333>;
-		interrupts = <16 2 0 0>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 4 1
-			0000 0 0 2 &mpic 5 1
-			0000 0 0 3 &mpic 6 1
-			0000 0 0 4 &mpic 7 1
-			>;
 		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
 			ranges = <0x2000000 0x0 0xe0000000
 				  0x2000000 0x0 0xe0000000
 				  0x0 0x20000000
@@ -585,30 +240,11 @@
 	};
 
 	pci1: pcie@fffe0a000 {
-		compatible = "fsl,p1022-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
 		reg = <0xf 0xffe0a000 0 0x1000>;
-		bus-range = <0 255>;
-		ranges = <0x2000000 0x0 0xc0000000 0xc 0x40000000 0x0 0x20000000
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>;
-		clock-frequency = <33333333>;
-		interrupts = <16 2 0 0>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 0 1
-			0000 0 0 2 &mpic 1 1
-			0000 0 0 3 &mpic 2 1
-			0000 0 0 4 &mpic 3 1
-			>;
 		pcie@0 {
 			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
 			ranges = <0x2000000 0x0 0xe0000000
 				  0x2000000 0x0 0xe0000000
 				  0x0 0x20000000
@@ -619,32 +255,11 @@
 		};
 	};
 
-
 	pci2: pcie@fffe0b000 {
-		compatible = "fsl,p1022-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
 		reg = <0xf 0xffe0b000 0 0x1000>;
-		bus-range = <0 255>;
-		ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
-		clock-frequency = <33333333>;
-		interrupts = <16 2 0 0>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 8 1
-			0000 0 0 2 &mpic 9 1
-			0000 0 0 3 &mpic 10 1
-			0000 0 0 4 &mpic 11 1
-			>;
 		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
 			ranges = <0x2000000 0x0 0xe0000000
 				  0x2000000 0x0 0xe0000000
 				  0x0 0x20000000
@@ -655,3 +270,5 @@
 		};
 	};
 };
+
+/include/ "fsl/p1022si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1023rds.dts b/arch/powerpc/boot/dts/p1023rds.dts
index d3b4782..beb6cb1 100644
--- a/arch/powerpc/boot/dts/p1023rds.dts
+++ b/arch/powerpc/boot/dts/p1023rds.dts
@@ -34,137 +34,30 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/dts-v1/;
+/include/ "fsl/p1023si-pre.dtsi"
 
 / {
 	model = "fsl,P1023";
 	compatible = "fsl,P1023RDS";
 	#address-cells = <2>;
 	#size-cells = <2>;
-
-	aliases {
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		pci2 = &pci2;
-
-		crypto = &crypto;
-		sec_jr0 = &sec_jr0;
-		sec_jr1 = &sec_jr1;
-		sec_jr2 = &sec_jr2;
-		sec_jr3 = &sec_jr3;
-		rtic_a = &rtic_a;
-		rtic_b = &rtic_b;
-		rtic_c = &rtic_c;
-		rtic_d = &rtic_d;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: PowerPC,P1023@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			next-level-cache = <&L2>;
-		};
-
-		cpu1: PowerPC,P1023@1 {
-			device_type = "cpu";
-			reg = <0x1>;
-			next-level-cache = <&L2>;
-		};
-	};
+	interrupt-parent = <&mpic>;
 
 	memory {
 		device_type = "memory";
 	};
 
-	soc@ff600000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "fsl,p1023-immr", "simple-bus";
+	soc: soc@ff600000 {
 		ranges = <0x0 0x0 0xff600000 0x200000>;
-		bus-frequency = <0>;		// Filled out by uboot.
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <12>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,p1023-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <16 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,p1023-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
 
 		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
 			rtc@68 {
 				compatible = "dallas,ds1374";
 				reg = <0x68>;
 			};
 		};
 
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
 		spi@7000 {
-			cell-index = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,p1023-espi", "fsl,mpc8536-espi";
-			reg = <0x7000 0x1000>;
-			interrupts = <59 0x2>;
-			interrupt-parent = <&mpic>;
-			fsl,espi-num-chipselects = <4>;
-
 			fsl_dataflash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -186,197 +79,14 @@
 			};
 		};
 
-		gpio: gpio-controller@f000 {
-			#gpio-cells = <2>;
-			compatible = "fsl,qoriq-gpio";
-			reg = <0xf000 0x100>;
-			interrupts = <47 0x2>;
-			interrupt-parent = <&mpic>;
-			gpio-controller;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,p1023-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;	// 32 bytes
-			cache-size = <0x40000>; // L2,256K
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
 		usb@22000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl-usb2-dr";
-			reg = <0x22000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <28 0x2>;
 			dr_mode = "host";
 			phy_type = "ulpi";
 		};
-
-		crypto: crypto@300000 {
-			compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x30000 0x10000>;
-			ranges = <0 0x30000 0x10000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <58 2>;
-
-			sec_jr0: jr@1000 {
-				compatible = "fsl,sec-v4.2-job-ring",
-					     "fsl,sec-v4.0-job-ring";
-				reg = <0x1000 0x1000>;
-				interrupts = <45 2>;
-			};
-
-			sec_jr1: jr@2000 {
-				compatible = "fsl,sec-v4.2-job-ring",
-					     "fsl,sec-v4.0-job-ring";
-				reg = <0x2000 0x1000>;
-				interrupts = <45 2>;
-			};
-
-			sec_jr2: jr@3000 {
-				compatible = "fsl,sec-v4.2-job-ring",
-					     "fsl,sec-v4.0-job-ring";
-				reg = <0x3000 0x1000>;
-				interrupts = <57 2>;
-			};
-
-			sec_jr3: jr@4000 {
-				compatible = "fsl,sec-v4.2-job-ring",
-					     "fsl,sec-v4.0-job-ring";
-				reg = <0x4000 0x1000>;
-				interrupts = <57 2>;
-			};
-
-			rtic@6000 {
-				compatible = "fsl,sec-v4.2-rtic",
-					     "fsl,sec-v4.0-rtic";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x6000 0x100>;
-				ranges = <0x0 0x6100 0xe00>;
-
-				rtic_a: rtic-a@0 {
-					compatible = "fsl,sec-v4.2-rtic-memory",
-						     "fsl,sec-v4.0-rtic-memory";
-					reg = <0x00 0x20 0x100 0x80>;
-				};
-
-				rtic_b: rtic-b@20 {
-					compatible = "fsl,sec-v4.2-rtic-memory",
-						     "fsl,sec-v4.0-rtic-memory";
-					reg = <0x20 0x20 0x200 0x80>;
-				};
-
-				rtic_c: rtic-c@40 {
-					compatible = "fsl,sec-v4.2-rtic-memory",
-						     "fsl,sec-v4.0-rtic-memory";
-					reg = <0x40 0x20 0x300 0x80>;
-				};
-
-				rtic_d: rtic-d@60 {
-					compatible = "fsl,sec-v4.2-rtic-memory",
-						     "fsl,sec-v4.0-rtic-memory";
-					reg = <0x60 0x20 0x500 0x80>;
-				};
-			};
-		};
-
-		power@e0070{
-			compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc",
-			             "fsl,p1022-pmc";
-			reg = <0xe0070 0x20>;
-			etsec1_clk: soc-clk@B0{
-				fsl,pmcdr-mask = <0x00000080>;
-			};
-			etsec2_clk: soc-clk@B1{
-				fsl,pmcdr-mask = <0x00000040>;
-			};
-			etsec3_clk: soc-clk@B2{
-				fsl,pmcdr-mask = <0x00000020>;
-			};
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-
-		msi@41600 {
-			compatible = "fsl,p1023-msi", "fsl,mpic-msi";
-			reg = <0x41600 0x80>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe0 0
-				0xe1 0
-				0xe2 0
-				0xe3 0
-				0xe4 0
-				0xe5 0
-				0xe6 0
-				0xe7 0>;
-			interrupt-parent = <&mpic>;
-		};
-
-		global-utilities@e0000 {	//global utilities block
-			compatible = "fsl,p1023-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
-		};
 	};
 
-	localbus@ff605000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,p1023-elbc", "fsl,elbc", "simple-bus";
+	lbc: localbus@ff605000 {
 		reg = <0 0xff605000 0 0x1000>;
-		interrupts = <19 2>;
-		interrupt-parent = <&mpic>;
 
 		/* NOR Flash, BCSR */
 		ranges = <0x0 0x0 0x0 0xee000000 0x02000000
@@ -428,34 +138,18 @@
 	};
 
 	pci0: pcie@ff60a000 {
-		compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
-		cell-index = <1>;
-		device_type = "pci";
-		#size-cells = <2>;
-		#address-cells = <3>;
 		reg = <0 0xff60a000 0 0x1000>;
-		bus-range = <0 255>;
 		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <16 2>;
 		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-			interrupt-map-mask = <0xf800 0 0 7>;
 			/* IRQ[0:3] are pulled up on board, set to active-low */
+			interrupt-map-mask = <0xf800 0 0 7>;
 			interrupt-map = <
 				/* IDSEL 0x0 */
-				0000 0 0 1 &mpic 0 1
-				0000 0 0 2 &mpic 1 1
-				0000 0 0 3 &mpic 2 1
-				0000 0 0 4 &mpic 3 1
+				0000 0 0 1 &mpic 0 1 0 0
+				0000 0 0 2 &mpic 1 1 0 0
+				0000 0 0 3 &mpic 2 1 0 0
+				0000 0 0 4 &mpic 3 1 0 0
 				>;
 			ranges = <0x2000000 0x0 0xc0000000
 				  0x2000000 0x0 0xc0000000
@@ -467,38 +161,22 @@
 		};
 	};
 
-	pci1: pcie@ff609000 {
-		compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
-		cell-index = <2>;
-		device_type = "pci";
-		#size-cells = <2>;
-		#address-cells = <3>;
+	board_pci1: pci1: pcie@ff609000 {
 		reg = <0 0xff609000 0 0x1000>;
-		bus-range = <0 255>;
 		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <16 2>;
 		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-			interrupt-map-mask = <0xf800 0 0 7>;
 			/*
 			 * IRQ[4:6] only for PCIe, set to active-high,
 			 * IRQ[7] is pulled up on board, set to active-low
 			 */
+			interrupt-map-mask = <0xf800 0 0 7>;
 			interrupt-map = <
 				/* IDSEL 0x0 */
-				0000 0 0 1 &mpic 4 2
-				0000 0 0 2 &mpic 5 2
-				0000 0 0 3 &mpic 6 2
-				0000 0 0 4 &mpic 7 1
+				0000 0 0 1 &mpic 4 2 0 0
+				0000 0 0 2 &mpic 5 2 0 0
+				0000 0 0 3 &mpic 6 2 0 0
+				0000 0 0 4 &mpic 7 1 0 0
 				>;
 			ranges = <0x2000000 0x0 0xa0000000
 				  0x2000000 0x0 0xa0000000
@@ -511,37 +189,21 @@
 	};
 
 	pci2: pcie@ff60b000 {
-		cell-index = <3>;
-		compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
-		device_type = "pci";
-		#size-cells = <2>;
-		#address-cells = <3>;
 		reg = <0 0xff60b000 0 0x1000>;
-		bus-range = <0 255>;
 		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <16 2>;
 		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-			interrupt-map-mask = <0xf800 0 0 7>;
 			/*
 			 * IRQ[8:10] are pulled up on board, set to active-low
 			 * IRQ[11] only for PCIe, set to active-high,
 			 */
+			interrupt-map-mask = <0xf800 0 0 7>;
 			interrupt-map = <
 				/* IDSEL 0x0 */
-				0000 0 0 1 &mpic 8 1
-				0000 0 0 2 &mpic 9 1
-				0000 0 0 3 &mpic 10 1
-				0000 0 0 4 &mpic 11 2
+				0000 0 0 1 &mpic 8 1 0 0
+				0000 0 0 2 &mpic 9 1 0 0
+				0000 0 0 3 &mpic 10 1 0 0
+				0000 0 0 4 &mpic 11 2 0 0
 				>;
 			ranges = <0x2000000 0x0 0x80000000
 				  0x2000000 0x0 0x80000000
@@ -553,3 +215,5 @@
 		};
 	};
 };
+
+/include/ "fsl/p1023si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p2020ds.dts b/arch/powerpc/boot/dts/p2020ds.dts
index 66f03d6..237310c 100644
--- a/arch/powerpc/boot/dts/p2020ds.dts
+++ b/arch/powerpc/boot/dts/p2020ds.dts
@@ -9,30 +9,17 @@
  * option) any later version.
  */
 
-/include/ "p2020si.dtsi"
+/include/ "fsl/p2020si-pre.dtsi"
 
 / {
 	model = "fsl,P2020DS";
 	compatible = "fsl,P2020DS";
 
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		ethernet2 = &enet2;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		pci2 = &pci2;
-	};
-
-
 	memory {
 		device_type = "memory";
 	};
 
-	localbus@ffe05000 {
-		compatible = "fsl,elbc", "simple-bus";
+	board_lbc: lbc: localbus@ffe05000 {
 		ranges = <0x0 0x0 0x0 0xe8000000 0x08000000
 			  0x1 0x0 0x0 0xe0000000 0x08000000
 			  0x2 0x0 0x0 0xffa00000 0x00040000
@@ -40,203 +27,18 @@
 			  0x4 0x0 0x0 0xffa40000 0x00040000
 			  0x5 0x0 0x0 0xffa80000 0x00040000
 			  0x6 0x0 0x0 0xffac0000 0x00040000>;
-
-		nor@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x0 0x0 0x8000000>;
-			bank-width = <2>;
-			device-width = <1>;
-
-			ramdisk@0 {
-				reg = <0x0 0x03000000>;
-				read-only;
-			};
-
-			diagnostic@3000000 {
-				reg = <0x03000000 0x00e00000>;
-				read-only;
-			};
-
-			dink@3e00000 {
-				reg = <0x03e00000 0x00200000>;
-				read-only;
-			};
-
-			kernel@4000000 {
-				reg = <0x04000000 0x00400000>;
-				read-only;
-			};
-
-			jffs2@4400000 {
-				reg = <0x04400000 0x03b00000>;
-			};
-
-			dtb@7f00000 {
-				reg = <0x07f00000 0x00080000>;
-				read-only;
-			};
-
-			u-boot@7f80000 {
-				reg = <0x07f80000 0x00080000>;
-				read-only;
-			};
-		};
-
-		nand@2,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,elbc-fcm-nand";
-			reg = <0x2 0x0 0x40000>;
-
-			u-boot@0 {
-				reg = <0x0 0x02000000>;
-				read-only;
-			};
-
-			jffs2@2000000 {
-				reg = <0x02000000 0x10000000>;
-			};
-
-			ramdisk@12000000 {
-				reg = <0x12000000 0x08000000>;
-				read-only;
-			};
-
-			kernel@1a000000 {
-				reg = <0x1a000000 0x04000000>;
-			};
-
-			dtb@1e000000 {
-				reg = <0x1e000000 0x01000000>;
-				read-only;
-			};
-
-			empty@1f000000 {
-				reg = <0x1f000000 0x21000000>;
-			};
-		};
-
-		board-control@3,0 {
-			compatible = "fsl,p2020ds-fpga", "fsl,fpga-ngpixis";
-			reg = <0x3 0x0 0x30>;
-		};
-
-		nand@4,0 {
-			compatible = "fsl,elbc-fcm-nand";
-			reg = <0x4 0x0 0x40000>;
-		};
-
-		nand@5,0 {
-			compatible = "fsl,elbc-fcm-nand";
-			reg = <0x5 0x0 0x40000>;
-		};
-
-		nand@6,0 {
-			compatible = "fsl,elbc-fcm-nand";
-			reg = <0x6 0x0 0x40000>;
-		};
+		reg = <0 0xffe05000 0 0x1000>;
 	};
 
-	soc@ffe00000 {
-
-		usb@22000 {
-			phy_type = "ulpi";
-		};
-
-		mdio@24520 {
-			phy0: ethernet-phy@0 {
-				interrupt-parent = <&mpic>;
-				interrupts = <3 1>;
-				reg = <0x0>;
-			};
-			phy1: ethernet-phy@1 {
-				interrupt-parent = <&mpic>;
-				interrupts = <3 1>;
-				reg = <0x1>;
-			};
-			phy2: ethernet-phy@2 {
-				interrupt-parent = <&mpic>;
-				interrupts = <3 1>;
-				reg = <0x2>;
-			};
-			tbi0: tbi-phy@11 {
-				reg = <0x11>;
-				device_type = "tbi-phy";
-			};
-
-		};
-
-		mdio@25520 {
-			tbi1: tbi-phy@11 {
-				reg = <0x11>;
-				device_type = "tbi-phy";
-			};
-		};
-
-		mdio@26520 {
-			tbi2: tbi-phy@11 {
-				reg = <0x11>;
-				device_type = "tbi-phy";
-			};
-
-		};
-
-		ptp_clock@24E00 {
-			compatible = "fsl,etsec-ptp";
-			reg = <0x24E00 0xB0>;
-			interrupts = <68 2 69 2 70 2>;
-			interrupt-parent = < &mpic >;
-			fsl,tclk-period = <5>;
-			fsl,tmr-prsc = <200>;
-			fsl,tmr-add = <0xCCCCCCCD>;
-			fsl,tmr-fiper1 = <0x3B9AC9FB>;
-			fsl,tmr-fiper2 = <0x0001869B>;
-			fsl,max-adj = <249999999>;
-		};
-
-		enet0: ethernet@24000 {
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy0>;
-			phy-connection-type = "rgmii-id";
-		};
-
-		enet1: ethernet@25000 {
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy1>;
-			phy-connection-type = "rgmii-id";
-
-		};
-
-		enet2: ethernet@26000 {
-			tbi-handle = <&tbi2>;
-			phy-handle = <&phy2>;
-			phy-connection-type = "rgmii-id";
-		};
-
-
-		msi@41600 {
-			compatible = "fsl,mpic-msi";
-		};
+	board_soc: soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
 	};
 
-	pci0: pcie@ffe08000 {
+	pci2: pcie@ffe08000 {
 		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x8 0x1
-			0000 0x0 0x0 0x2 &mpic 0x9 0x1
-			0000 0x0 0x0 0x3 &mpic 0xa 0x1
-			0000 0x0 0x0 0x4 &mpic 0xb 0x1
-			>;
+		reg = <0 0xffe08000 0 0x1000>;
 		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
 			ranges = <0x2000000 0x0 0x80000000
 				  0x2000000 0x0 0x80000000
 				  0x0 0x20000000
@@ -247,61 +49,11 @@
 		};
 	};
 
-	pci1: pcie@ffe09000 {
+	board_pci1: pci1: pcie@ffe09000 {
 		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
-		interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
-		interrupt-map = <
-
-			// IDSEL 0x11 func 0 - PCI slot 1
-			0x8800 0x0 0x0 0x1 &i8259 0x9 0x2
-			0x8800 0x0 0x0 0x2 &i8259 0xa 0x2
-
-			// IDSEL 0x11 func 1 - PCI slot 1
-			0x8900 0x0 0x0 0x1 &i8259 0x9 0x2
-			0x8900 0x0 0x0 0x2 &i8259 0xa 0x2
-
-			// IDSEL 0x11 func 2 - PCI slot 1
-			0x8a00 0x0 0x0 0x1 &i8259 0x9 0x2
-			0x8a00 0x0 0x0 0x2 &i8259 0xa 0x2
-
-			// IDSEL 0x11 func 3 - PCI slot 1
-			0x8b00 0x0 0x0 0x1 &i8259 0x9 0x2
-			0x8b00 0x0 0x0 0x2 &i8259 0xa 0x2
-
-			// IDSEL 0x11 func 4 - PCI slot 1
-			0x8c00 0x0 0x0 0x1 &i8259 0x9 0x2
-			0x8c00 0x0 0x0 0x2 &i8259 0xa 0x2
-
-			// IDSEL 0x11 func 5 - PCI slot 1
-			0x8d00 0x0 0x0 0x1 &i8259 0x9 0x2
-			0x8d00 0x0 0x0 0x2 &i8259 0xa 0x2
-
-			// IDSEL 0x11 func 6 - PCI slot 1
-			0x8e00 0x0 0x0 0x1 &i8259 0x9 0x2
-			0x8e00 0x0 0x0 0x2 &i8259 0xa 0x2
-
-			// IDSEL 0x11 func 7 - PCI slot 1
-			0x8f00 0x0 0x0 0x1 &i8259 0x9 0x2
-			0x8f00 0x0 0x0 0x2 &i8259 0xa 0x2
-
-			// IDSEL 0x1d  Audio
-			0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
-
-			// IDSEL 0x1e Legacy
-			0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
-			0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
-
-			// IDSEL 0x1f IDE/SATA
-			0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
-			0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
-			>;
-
+		reg = <0 0xffe09000 0 0x1000>;
 		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
 			ranges = <0x2000000 0x0 0xa0000000
 				  0x2000000 0x0 0xa0000000
 				  0x0 0x20000000
@@ -309,89 +61,14 @@
 				  0x1000000 0x0 0x0
 				  0x1000000 0x0 0x0
 				  0x0 0x10000>;
-			uli1575@0 {
-				reg = <0x0 0x0 0x0 0x0 0x0>;
-				#size-cells = <2>;
-				#address-cells = <3>;
-				ranges = <0x2000000 0x0 0xa0000000
-					  0x2000000 0x0 0xa0000000
-					  0x0 0x20000000
-
-					  0x1000000 0x0 0x0
-					  0x1000000 0x0 0x0
-					  0x0 0x10000>;
-				isa@1e {
-					device_type = "isa";
-					#interrupt-cells = <2>;
-					#size-cells = <1>;
-					#address-cells = <2>;
-					reg = <0xf000 0x0 0x0 0x0 0x0>;
-					ranges = <0x1 0x0 0x1000000 0x0 0x0
-						  0x1000>;
-					interrupt-parent = <&i8259>;
-
-					i8259: interrupt-controller@20 {
-						reg = <0x1 0x20 0x2
-						       0x1 0xa0 0x2
-						       0x1 0x4d0 0x2>;
-						interrupt-controller;
-						device_type = "interrupt-controller";
-						#address-cells = <0>;
-						#interrupt-cells = <2>;
-						compatible = "chrp,iic";
-						interrupts = <4 1>;
-						interrupt-parent = <&mpic>;
-					};
-
-					i8042@60 {
-						#size-cells = <0>;
-						#address-cells = <1>;
-						reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
-						interrupts = <1 3 12 3>;
-						interrupt-parent =
-							<&i8259>;
-
-						keyboard@0 {
-							reg = <0x0>;
-							compatible = "pnpPNP,303";
-						};
-
-						mouse@1 {
-							reg = <0x1>;
-							compatible = "pnpPNP,f03";
-						};
-					};
-
-					rtc@70 {
-						compatible = "pnpPNP,b00";
-						reg = <0x1 0x70 0x2>;
-					};
-
-					gpio@400 {
-						reg = <0x1 0x400 0x80>;
-					};
-				};
-			};
 		};
-
 	};
 
-	pci2: pcie@ffe0a000 {
+	pci0: pcie@ffe0a000 {
 		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x0 0x1
-			0000 0x0 0x0 0x2 &mpic 0x1 0x1
-			0000 0x0 0x0 0x3 &mpic 0x2 0x1
-			0000 0x0 0x0 0x4 &mpic 0x3 0x1
-			>;
+		reg = <0 0xffe0a000 0 0x1000>;
 		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
 			ranges = <0x2000000 0x0 0xc0000000
 				  0x2000000 0x0 0xc0000000
 				  0x0 0x20000000
@@ -402,3 +79,11 @@
 		};
 	};
 };
+
+/*
+ * p2020ds.dtsi must be last to ensure board_pci0 overrides pci0 settings
+ * for interrupt-map & interrupt-map-mask
+ */
+
+/include/ "fsl/p2020si-post.dtsi"
+/include/ "p2020ds.dtsi"
diff --git a/arch/powerpc/boot/dts/p2020ds.dtsi b/arch/powerpc/boot/dts/p2020ds.dtsi
new file mode 100644
index 0000000..c1cf6ce
--- /dev/null
+++ b/arch/powerpc/boot/dts/p2020ds.dtsi
@@ -0,0 +1,316 @@
+/*
+ * P2020DS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		ramdisk@0 {
+			reg = <0x0 0x03000000>;
+			read-only;
+		};
+
+		diagnostic@3000000 {
+			reg = <0x03000000 0x00e00000>;
+			read-only;
+		};
+
+		dink@3e00000 {
+			reg = <0x03e00000 0x00200000>;
+			read-only;
+		};
+
+		kernel@4000000 {
+			reg = <0x04000000 0x00400000>;
+			read-only;
+		};
+
+		jffs2@4400000 {
+			reg = <0x04400000 0x03b00000>;
+		};
+
+		dtb@7f00000 {
+			reg = <0x07f00000 0x00080000>;
+			read-only;
+		};
+
+		u-boot@7f80000 {
+			reg = <0x07f80000 0x00080000>;
+			read-only;
+		};
+	};
+
+	nand@2,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,elbc-fcm-nand";
+		reg = <0x2 0x0 0x40000>;
+
+		u-boot@0 {
+			reg = <0x0 0x02000000>;
+			read-only;
+		};
+
+		jffs2@2000000 {
+			reg = <0x02000000 0x10000000>;
+		};
+
+		ramdisk@12000000 {
+			reg = <0x12000000 0x08000000>;
+			read-only;
+		};
+
+		kernel@1a000000 {
+			reg = <0x1a000000 0x04000000>;
+		};
+
+		dtb@1e000000 {
+			reg = <0x1e000000 0x01000000>;
+			read-only;
+		};
+
+		empty@1f000000 {
+			reg = <0x1f000000 0x21000000>;
+		};
+	};
+
+	board-control@3,0 {
+		compatible = "fsl,p2020ds-fpga", "fsl,fpga-ngpixis";
+		reg = <0x3 0x0 0x30>;
+	};
+
+	nand@4,0 {
+		compatible = "fsl,elbc-fcm-nand";
+		reg = <0x4 0x0 0x40000>;
+	};
+
+	nand@5,0 {
+		compatible = "fsl,elbc-fcm-nand";
+		reg = <0x5 0x0 0x40000>;
+	};
+
+	nand@6,0 {
+		compatible = "fsl,elbc-fcm-nand";
+		reg = <0x6 0x0 0x40000>;
+	};
+};
+
+&board_soc {
+	usb@22000 {
+		phy_type = "ulpi";
+	};
+
+	mdio@24520 {
+		phy0: ethernet-phy@0 {
+			interrupts = <3 1 0 0>;
+			reg = <0x0>;
+		};
+		phy1: ethernet-phy@1 {
+			interrupts = <3 1 0 0>;
+			reg = <0x1>;
+		};
+		phy2: ethernet-phy@2 {
+			interrupts = <3 1 0 0>;
+			reg = <0x2>;
+		};
+		tbi0: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+
+	};
+
+	mdio@25520 {
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	mdio@26520 {
+		tbi2: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+
+	};
+
+	ptp_clock@24e00 {
+		fsl,tclk-period = <5>;
+		fsl,tmr-prsc = <200>;
+		fsl,tmr-add = <0xCCCCCCCD>;
+		fsl,tmr-fiper1 = <0x3B9AC9FB>;
+		fsl,tmr-fiper2 = <0x0001869B>;
+		fsl,max-adj = <249999999>;
+	};
+
+	enet0: ethernet@24000 {
+		tbi-handle = <&tbi0>;
+		phy-handle = <&phy0>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	enet1: ethernet@25000 {
+		tbi-handle = <&tbi1>;
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+
+	};
+
+	enet2: ethernet@26000 {
+		tbi-handle = <&tbi2>;
+		phy-handle = <&phy2>;
+		phy-connection-type = "rgmii-id";
+	};
+};
+
+&board_pci1 {
+	pcie@0 {
+		interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			// IDSEL 0x11 func 0 - PCI slot 1
+			0x8800 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8800 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 1 - PCI slot 1
+			0x8900 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8900 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 2 - PCI slot 1
+			0x8a00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8a00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 3 - PCI slot 1
+			0x8b00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8b00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 4 - PCI slot 1
+			0x8c00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8c00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 5 - PCI slot 1
+			0x8d00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8d00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 6 - PCI slot 1
+			0x8e00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8e00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 7 - PCI slot 1
+			0x8f00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8f00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x1d  Audio
+			0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
+
+			// IDSEL 0x1e Legacy
+			0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
+			0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
+
+			// IDSEL 0x1f IDE/SATA
+			0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
+			0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
+			>;
+
+		uli1575@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+			isa@1e {
+				device_type = "isa";
+				#interrupt-cells = <2>;
+				#size-cells = <1>;
+				#address-cells = <2>;
+				reg = <0xf000 0x0 0x0 0x0 0x0>;
+				ranges = <0x1 0x0 0x1000000 0x0 0x0
+					  0x1000>;
+				interrupt-parent = <&i8259>;
+
+				i8259: interrupt-controller@20 {
+					reg = <0x1 0x20 0x2
+					       0x1 0xa0 0x2
+					       0x1 0x4d0 0x2>;
+					interrupt-controller;
+					device_type = "interrupt-controller";
+					#address-cells = <0>;
+					#interrupt-cells = <2>;
+					compatible = "chrp,iic";
+					interrupts = <4 1 0 0>;
+					interrupt-parent = <&mpic>;
+				};
+
+				i8042@60 {
+					#size-cells = <0>;
+					#address-cells = <1>;
+					reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
+					interrupts = <1 3 12 3>;
+					interrupt-parent =
+						<&i8259>;
+
+					keyboard@0 {
+						reg = <0x0>;
+						compatible = "pnpPNP,303";
+					};
+
+					mouse@1 {
+						reg = <0x1>;
+						compatible = "pnpPNP,f03";
+					};
+				};
+
+				rtc@70 {
+					compatible = "pnpPNP,b00";
+					reg = <0x1 0x70 0x2>;
+				};
+
+				gpio@400 {
+					reg = <0x1 0x400 0x80>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/p2020rdb.dts b/arch/powerpc/boot/dts/p2020rdb.dts
index 1d7a05f..26759a5 100644
--- a/arch/powerpc/boot/dts/p2020rdb.dts
+++ b/arch/powerpc/boot/dts/p2020rdb.dts
@@ -9,7 +9,7 @@
  * option) any later version.
  */
 
-/include/ "p2020si.dtsi"
+/include/ "fsl/p2020si-pre.dtsi"
 
 / {
 	model = "fsl,P2020RDB";
@@ -29,7 +29,8 @@
 		device_type = "memory";
 	};
 
-	localbus@ffe05000 {
+	lbc: localbus@ffe05000 {
+		reg = <0 0xffe05000 0 0x1000>;
 
 		/* NOR and NAND Flashes */
 		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
@@ -140,7 +141,9 @@
 
 	};
 
-	soc@ffe00000 {
+	soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+
 		i2c@3000 {
 			rtc@68 {
 				compatible = "dallas,ds1339";
@@ -148,17 +151,13 @@
 			};
 		};
 
-	spi@7000 {
-
-		fsl_m25p80@0 {
+		spi@7000 {
+			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "fsl,espi-flash";
+				compatible = "spansion,s25sl12801";
 				reg = <0>;
-				linux,modalias = "fsl_m25p80";
-				modal = "s25sl128b";
 				spi-max-frequency = <50000000>;
-				mode = <0>;
 
 				partition@0 {
 					/* 512KB for u-boot Bootloader Image */
@@ -202,15 +201,17 @@
 
 		mdio@24520 {
 			phy0: ethernet-phy@0 {
-				interrupt-parent = <&mpic>;
-				interrupts = <3 1>;
+				interrupts = <3 1 0 0>;
 				reg = <0x0>;
-				};
+			};
 			phy1: ethernet-phy@1 {
-				interrupt-parent = <&mpic>;
-				interrupts = <3 1>;
+				interrupts = <3 1 0 0>;
 				reg = <0x1>;
-				};
+			};
+			tbi-phy@2 {
+				device_type = "tbi-phy";
+				reg = <0x2>;
+			};
 		};
 
 		mdio@25520 {
@@ -224,11 +225,7 @@
 			status = "disabled";
 		};
 
-		ptp_clock@24E00 {
-			compatible = "fsl,etsec-ptp";
-			reg = <0x24E00 0xB0>;
-			interrupts = <68 2 69 2 70 2>;
-			interrupt-parent = < &mpic >;
+		ptp_clock@24e00 {
 			fsl,tclk-period = <5>;
 			fsl,tmr-prsc = <200>;
 			fsl,tmr-add = <0xCCCCCCCD>;
@@ -252,29 +249,18 @@
 			phy-handle = <&phy1>;
 			phy-connection-type = "rgmii-id";
 		};
-
 	};
 
 	pci0: pcie@ffe08000 {
+		reg = <0 0xffe08000 0 0x1000>;
 		status = "disabled";
 	};
 
 	pci1: pcie@ffe09000 {
+		reg = <0 0xffe09000 0 0x1000>;
 		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x4 0x1
-			0000 0x0 0x0 0x2 &mpic 0x5 0x1
-			0000 0x0 0x0 0x3 &mpic 0x6 0x1
-			0000 0x0 0x0 0x4 &mpic 0x7 0x1
-			>;
-			pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
+		pcie@0 {
 			ranges = <0x2000000 0x0 0xa0000000
 				  0x2000000 0x0 0xa0000000
 				  0x0 0x20000000
@@ -286,21 +272,10 @@
 	};
 
 	pci2: pcie@ffe0a000 {
+		reg = <0 0xffe0a000 0 0x1000>;
 		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x0 0x1
-			0000 0x0 0x0 0x2 &mpic 0x1 0x1
-			0000 0x0 0x0 0x3 &mpic 0x2 0x1
-			0000 0x0 0x0 0x4 &mpic 0x3 0x1
-			>;
 		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
 			ranges = <0x2000000 0x0 0x80000000
 				  0x2000000 0x0 0x80000000
 				  0x0 0x20000000
@@ -311,3 +286,5 @@
 		};
 	};
 };
+
+/include/ "fsl/p2020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts b/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts
index fc8ddddf..66aac86 100644
--- a/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts
+++ b/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts
@@ -14,28 +14,16 @@
  * option) any later version.
  */
 
-/include/ "p2020si.dtsi"
+/include/ "p2020rdb.dts"
 
 / {
 	model = "fsl,P2020RDB";
 	compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP";
 
-	aliases {
-		ethernet1 = &enet1;
-		ethernet2 = &enet2;
-		serial0 = &serial0;
-		pci0 = &pci0;
-	};
-
 	cpus {
 		PowerPC,P2020@1 {
-		status = "disabled";
+			status = "disabled";
 		};
-
-	};
-
-	memory {
-		device_type = "memory";
 	};
 
 	localbus@ffe05000 {
@@ -43,115 +31,18 @@
 	};
 
 	soc@ffe00000 {
-		i2c@3000 {
-			rtc@68 {
-				compatible = "dallas,ds1339";
-				reg = <0x68>;
-			};
-		};
-
 		serial1: serial@4600 {
 			status = "disabled";
 		};
 
-		spi@7000 {
-
-			fsl_m25p80@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "fsl,espi-flash";
-				reg = <0>;
-				linux,modalias = "fsl_m25p80";
-				modal = "s25sl128b";
-				spi-max-frequency = <50000000>;
-				mode = <0>;
-
-				partition@0 {
-					/* 512KB for u-boot Bootloader Image */
-					reg = <0x0 0x00080000>;
-					label = "SPI (RO) U-Boot Image";
-					read-only;
-				};
-
-				partition@80000 {
-					/* 512KB for DTB Image */
-					reg = <0x00080000 0x00080000>;
-					label = "SPI (RO) DTB Image";
-					read-only;
-				};
-
-				partition@100000 {
-					/* 4MB for Linux Kernel Image */
-					reg = <0x00100000 0x00400000>;
-					label = "SPI (RO) Linux Kernel Image";
-					read-only;
-				};
-
-				partition@500000 {
-					/* 4MB for Compressed RFS Image */
-					reg = <0x00500000 0x00400000>;
-					label = "SPI (RO) Compressed RFS Image";
-					read-only;
-				};
-
-				partition@900000 {
-					/* 7MB for JFFS2 based RFS */
-					reg = <0x00900000 0x00700000>;
-					label = "SPI (RW) JFFS2 RFS";
-				};
-			};
-		};
-
 		dma@c300 {
 			status = "disabled";
 		};
 
-		usb@22000 {
-			phy_type = "ulpi";
-		};
-
-		mdio@24520 {
-
-			phy0: ethernet-phy@0 {
-				interrupt-parent = <&mpic>;
-				interrupts = <3 1>;
-				reg = <0x0>;
-			};
-			phy1: ethernet-phy@1 {
-				interrupt-parent = <&mpic>;
-				interrupts = <3 1>;
-				reg = <0x1>;
-			};
-		};
-
-		mdio@25520 {
-			tbi0: tbi-phy@11 {
-				reg = <0x11>;
-				device_type = "tbi-phy";
-			};
-		};
-
-		mdio@26520 {
-			status = "disabled";
-		};
-
 		enet0: ethernet@24000 {
 			status = "disabled";
 		};
 
-		enet1: ethernet@25000 {
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy0>;
-			phy-connection-type = "sgmii";
-
-		};
-
-		enet2: ethernet@26000 {
-			phy-handle = <&phy1>;
-			phy-connection-type = "rgmii-id";
-		};
-
-
 		mpic: pic@40000 {
 			protected-sources = <
 			42 76 77 78 79 /* serial1 , dma2 */
@@ -164,40 +55,12 @@
 		msi@41600 {
 			status = "disabled";
 		};
-
-
 	};
 
 	pci0: pcie@ffe08000 {
 		status = "disabled";
 	};
 
-	pci1: pcie@ffe09000 {
-		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x4 0x1
-			0000 0x0 0x0 0x2 &mpic 0x5 0x1
-			0000 0x0 0x0 0x3 &mpic 0x6 0x1
-			0000 0x0 0x0 0x4 &mpic 0x7 0x1
-			>;
-		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			ranges = <0x2000000 0x0 0xa0000000
-				  0x2000000 0x0 0xa0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
 	pci2: pcie@ffe0a000 {
 		status = "disabled";
 	};
diff --git a/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts b/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts
index 261c34b..9bd8ef49 100644
--- a/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts
+++ b/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts
@@ -15,28 +15,18 @@
  * option) any later version.
  */
 
-/include/ "p2020si.dtsi"
+/include/ "p2020rdb.dts"
 
 / {
 	model = "fsl,P2020RDB";
 	compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP";
 
-	aliases {
-		ethernet0 = &enet0;
-		serial0 = &serial1;
-		pci1 = &pci1;
-	};
-
 	cpus {
 		PowerPC,P2020@0 {
-		status = "disabled";
+			status = "disabled";
 		};
 	};
 
-	memory {
-		device_type = "memory";
-	};
-
 	localbus@ffe05000 {
 		status = "disabled";
 	};
@@ -70,55 +60,10 @@
 			status = "disabled";
 		};
 
-		dma@c300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,eloplus-dma";
-			reg = <0xc300 0x4>;
-			ranges = <0x0 0xc100 0x200>;
-			cell-index = <1>;
-			dma-channel@0 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <76 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <77 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <78 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <79 2>;
-			};
-		};
-
 		gpio: gpio-controller@f000 {
 			status = "disabled";
 		};
 
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,p2020-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;	// 32 bytes
-			cache-size = <0x80000>; // L2,512K
-			interrupt-parent = <&mpic>;
-		};
-
 		dma@21300 {
 			status = "disabled";
 		};
@@ -139,12 +84,6 @@
 			status = "disabled";
 		};
 
-		enet0: ethernet@24000 {
-			fixed-link = <1 1 1000 0 0>;
-			phy-connection-type = "rgmii-id";
-
-		};
-
 		enet1: ethernet@25000 {
 			status = "disabled";
 		};
@@ -170,22 +109,6 @@
 			>;
 		};
 
-		msi@41600 {
-			compatible = "fsl,p2020-msi", "fsl,mpic-msi";
-			reg = <0x41600 0x80>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe0 0
-				0xe1 0
-				0xe2 0
-				0xe3 0
-				0xe4 0
-				0xe5 0
-				0xe6 0
-				0xe7 0>;
-			interrupt-parent = <&mpic>;
-		};
-
 		global-utilities@e0000 {	//global utilities block
 			status = "disabled";
 		};
@@ -199,30 +122,4 @@
 	pci1: pcie@ffe09000 {
 		status = "disabled";
 	};
-
-	pci2: pcie@ffe0a000 {
-		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x0 0x1
-			0000 0x0 0x0 0x2 &mpic 0x1 0x1
-			0000 0x0 0x0 0x3 &mpic 0x2 0x1
-			0000 0x0 0x0 0x4 &mpic 0x3 0x1
-			>;
-		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			ranges = <0x2000000 0x0 0x80000000
-				  0x2000000 0x0 0x80000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
 };
diff --git a/arch/powerpc/boot/dts/p2020si.dtsi b/arch/powerpc/boot/dts/p2020si.dtsi
deleted file mode 100644
index 6def17f..0000000
--- a/arch/powerpc/boot/dts/p2020si.dtsi
+++ /dev/null
@@ -1,382 +0,0 @@
-/*
- * P2020 Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-/ {
-	compatible = "fsl,P2020";
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,P2020@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			next-level-cache = <&L2>;
-		};
-
-		PowerPC,P2020@1 {
-			device_type = "cpu";
-			reg = <0x1>;
-			next-level-cache = <&L2>;
-		};
-	};
-
-	localbus@ffe05000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus";
-		reg = <0 0xffe05000 0 0x1000>;
-		interrupts = <19 2>;
-		interrupt-parent = <&mpic>;
-	};
-
-	soc@ffe00000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "fsl,p2020-immr", "simple-bus";
-		ranges = <0x0  0x0 0xffe00000 0x100000>;
-		bus-frequency = <0>;		// Filled out by uboot.
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <12>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,p2020-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,p2020-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		spi@7000 {
-			cell-index = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,espi";
-			reg = <0x7000 0x1000>;
-			interrupts = <59 0x2>;
-			interrupt-parent = <&mpic>;
-			mode = "cpu";
-		};
-
-		dma@c300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,eloplus-dma";
-			reg = <0xc300 0x4>;
-			ranges = <0x0 0xc100 0x200>;
-			cell-index = <1>;
-			dma-channel@0 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <76 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <77 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <78 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <79 2>;
-			};
-		};
-
-		gpio: gpio-controller@f000 {
-			#gpio-cells = <2>;
-			compatible = "fsl,mpc8572-gpio";
-			reg = <0xf000 0x100>;
-			interrupts = <47 0x2>;
-			interrupt-parent = <&mpic>;
-			gpio-controller;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,p2020-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;	// 32 bytes
-			cache-size = <0x80000>; // L2,512K
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		usb@22000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl-usb2-dr";
-			reg = <0x22000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <28 0x2>;
-		};
-
-		mdio@24520 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,gianfar-mdio";
-			reg = <0x24520 0x20>;
-		};
-
-		mdio@25520 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,gianfar-tbi";
-			reg = <0x26520 0x20>;
-		};
-
-		mdio@26520 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,gianfar-tbi";
-			reg = <0x520 0x20>;
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30 2 34 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 2 36 2 40 2>;
-			interrupt-parent = <&mpic>;
-
-		};
-
-		enet2: ethernet@26000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <2>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x26000 0x1000>;
-			ranges = <0x0 0x26000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <31 2 32 2 33 2>;
-			interrupt-parent = <&mpic>;
-
-		};
-
-		sdhci@2e000 {
-			compatible = "fsl,p2020-esdhc", "fsl,esdhc";
-			reg = <0x2e000 0x1000>;
-			interrupts = <72 0x2>;
-			interrupt-parent = <&mpic>;
-			/* Filled in by U-Boot */
-			clock-frequency = <0>;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
-				     "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <45 2 58 2>;
-			interrupt-parent = <&mpic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0xbfe>;
-			fsl,descriptor-types-mask = <0x3ab0ebf>;
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-
-		msi@41600 {
-			compatible = "fsl,p2020-msi", "fsl,mpic-msi";
-			reg = <0x41600 0x80>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe0 0
-				0xe1 0
-				0xe2 0
-				0xe3 0
-				0xe4 0
-				0xe5 0
-				0xe6 0
-				0xe7 0>;
-			interrupt-parent = <&mpic>;
-		};
-
-		global-utilities@e0000 {	//global utilities block
-			compatible = "fsl,p2020-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
-		};
-	};
-
-	pci0: pcie@ffe08000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0 0xffe08000 0 0x1000>;
-		bus-range = <0 255>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <24 2>;
-	};
-
-	pci1: pcie@ffe09000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0 0xffe09000 0 0x1000>;
-		bus-range = <0 255>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <25 2>;
-	};
-
-	pci2: pcie@ffe0a000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0 0xffe0a000 0 0x1000>;
-		bus-range = <0 255>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <26 2>;
-	};
-};
diff --git a/arch/powerpc/boot/dts/p2041rdb.dts b/arch/powerpc/boot/dts/p2041rdb.dts
index 79b6895..4f957db 100644
--- a/arch/powerpc/boot/dts/p2041rdb.dts
+++ b/arch/powerpc/boot/dts/p2041rdb.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "p2041si.dtsi"
+/include/ "fsl/p2041si-pre.dtsi"
 
 / {
 	model = "fsl,P2041RDB";
@@ -50,6 +50,8 @@
 	};
 
 	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
 		spi@110000 {
 			flash@0 {
 				#address-cells = <1>;
@@ -106,7 +108,18 @@
 		};
 	};
 
-	localbus@ffe124000 {
+	rio: rapidio@ffe0c0000 {
+		reg = <0xf 0xfe0c0000 0 0x11000>;
+
+		port1 {
+			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+		};
+		port2 {
+			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+		};
+	};
+
+	lbc: localbus@ffe124000 {
 		reg = <0xf 0xfe124000 0 0x1000>;
 		ranges = <0 0 0xf 0xe8000000 0x08000000>;
 
@@ -122,6 +135,7 @@
 		reg = <0xf 0xfe200000 0 0x1000>;
 		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
 			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		fsl,msi = <&msi0>;
 		pcie@0 {
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000
@@ -137,6 +151,7 @@
 		reg = <0xf 0xfe201000 0 0x1000>;
 		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
 			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+		fsl,msi = <&msi1>;
 		pcie@0 {
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000
@@ -152,6 +167,7 @@
 		reg = <0xf 0xfe202000 0 0x1000>;
 		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
 			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		fsl,msi = <&msi2>;
 		pcie@0 {
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000
@@ -163,3 +179,5 @@
 		};
 	};
 };
+
+/include/ "fsl/p2041si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p2041si.dtsi b/arch/powerpc/boot/dts/p2041si.dtsi
deleted file mode 100644
index f7492ed..0000000
--- a/arch/powerpc/boot/dts/p2041si.dtsi
+++ /dev/null
@@ -1,692 +0,0 @@
-/*
- * P2041 Silicon Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/ {
-	compatible = "fsl,P2041";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	aliases {
-		ccsr = &soc;
-		dcsr = &dcsr;
-
-		serial0 = &serial0;
-		serial1 = &serial1;
-		serial2 = &serial2;
-		serial3 = &serial3;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		pci2 = &pci2;
-		usb0 = &usb0;
-		usb1 = &usb1;
-		dma0 = &dma0;
-		dma1 = &dma1;
-		sdhc = &sdhc;
-		msi0 = &msi0;
-		msi1 = &msi1;
-		msi2 = &msi2;
-
-		crypto = &crypto;
-		sec_jr0 = &sec_jr0;
-		sec_jr1 = &sec_jr1;
-		sec_jr2 = &sec_jr2;
-		sec_jr3 = &sec_jr3;
-		rtic_a = &rtic_a;
-		rtic_b = &rtic_b;
-		rtic_c = &rtic_c;
-		rtic_d = &rtic_d;
-		sec_mon = &sec_mon;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: PowerPC,e500mc@0 {
-			device_type = "cpu";
-			reg = <0>;
-			next-level-cache = <&L2_0>;
-			L2_0: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-		cpu1: PowerPC,e500mc@1 {
-			device_type = "cpu";
-			reg = <1>;
-			next-level-cache = <&L2_1>;
-			L2_1: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-		cpu2: PowerPC,e500mc@2 {
-			device_type = "cpu";
-			reg = <2>;
-			next-level-cache = <&L2_2>;
-			L2_2: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-		cpu3: PowerPC,e500mc@3 {
-			device_type = "cpu";
-			reg = <3>;
-			next-level-cache = <&L2_3>;
-			L2_3: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-	};
-
-	dcsr: dcsr@f00000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,dcsr", "simple-bus";
-
-		dcsr-epu@0 {
-			compatible = "fsl,dcsr-epu";
-			interrupts = <52 2 0 0
-				      84 2 0 0
-				      85 2 0 0>;
-			interrupt-parent = <&mpic>;
-			reg = <0x0 0x1000>;
-		};
-		dcsr-npc {
-			compatible = "fsl,dcsr-npc";
-			reg = <0x1000 0x1000 0x1000000 0x8000>;
-		};
-		dcsr-nxc@2000 {
-			compatible = "fsl,dcsr-nxc";
-			reg = <0x2000 0x1000>;
-		};
-		dcsr-corenet {
-			compatible = "fsl,dcsr-corenet";
-			reg = <0x8000 0x1000 0xB0000 0x1000>;
-		};
-		dcsr-dpaa@9000 {
-			compatible = "fsl,p2041-dcsr-dpaa", "fsl,dcsr-dpaa";
-			reg = <0x9000 0x1000>;
-		};
-		dcsr-ocn@11000 {
-			compatible = "fsl,p2041-dcsr-ocn", "fsl,dcsr-ocn";
-			reg = <0x11000 0x1000>;
-		};
-		dcsr-ddr@12000 {
-			compatible = "fsl,dcsr-ddr";
-			dev-handle = <&ddr>;
-			reg = <0x12000 0x1000>;
-		};
-		dcsr-nal@18000 {
-			compatible = "fsl,p2041-dcsr-nal", "fsl,dcsr-nal";
-			reg = <0x18000 0x1000>;
-		};
-		dcsr-rcpm@22000 {
-			compatible = "fsl,p2041-dcsr-rcpm", "fsl,dcsr-rcpm";
-			reg = <0x22000 0x1000>;
-		};
-		dcsr-cpu-sb-proxy@40000 {
-			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-			cpu-handle = <&cpu0>;
-			reg = <0x40000 0x1000>;
-		};
-		dcsr-cpu-sb-proxy@41000 {
-			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-			cpu-handle = <&cpu1>;
-			reg = <0x41000 0x1000>;
-		};
-		dcsr-cpu-sb-proxy@42000 {
-			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-			cpu-handle = <&cpu2>;
-			reg = <0x42000 0x1000>;
-		};
-		dcsr-cpu-sb-proxy@43000 {
-			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-			cpu-handle = <&cpu3>;
-			reg = <0x43000 0x1000>;
-		};
-	};
-
-	soc: soc@ffe000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
-		reg = <0xf 0xfe000000 0 0x00001000>;
-
-		soc-sram-error {
-			compatible = "fsl,soc-sram-error";
-			interrupts = <16 2 1 29>;
-		};
-
-		corenet-law@0 {
-			compatible = "fsl,corenet-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <32>;
-		};
-
-		ddr: memory-controller@8000 {
-			compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
-			reg = <0x8000 0x1000>;
-			interrupts = <16 2 1 23>;
-		};
-
-		cpc: l3-cache-controller@10000 {
-			compatible = "fsl,p2041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
-			reg = <0x10000 0x1000>;
-			interrupts = <16 2 1 27>;
-		};
-
-		corenet-cf@18000 {
-			compatible = "fsl,corenet-cf";
-			reg = <0x18000 0x1000>;
-			interrupts = <16 2 1 31>;
-			fsl,ccf-num-csdids = <32>;
-			fsl,ccf-num-snoopids = <32>;
-		};
-
-		iommu@20000 {
-			compatible = "fsl,pamu-v1.0", "fsl,pamu";
-			reg = <0x20000 0x4000>;
-			interrupts = <
-				24 2 0 0
-				16 2 1 30>;
-		};
-
-		mpic: pic@40000 {
-			clock-frequency = <0>;
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <4>;
-			reg = <0x40000 0x40000>;
-			compatible = "fsl,mpic", "chrp,open-pic";
-			device_type = "open-pic";
-		};
-
-		msi0: msi@41600 {
-			compatible = "fsl,mpic-msi";
-			reg = <0x41600 0x200>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe0 0 0 0
-				0xe1 0 0 0
-				0xe2 0 0 0
-				0xe3 0 0 0
-				0xe4 0 0 0
-				0xe5 0 0 0
-				0xe6 0 0 0
-				0xe7 0 0 0>;
-		};
-
-		msi1: msi@41800 {
-			compatible = "fsl,mpic-msi";
-			reg = <0x41800 0x200>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe8 0 0 0
-				0xe9 0 0 0
-				0xea 0 0 0
-				0xeb 0 0 0
-				0xec 0 0 0
-				0xed 0 0 0
-				0xee 0 0 0
-				0xef 0 0 0>;
-		};
-
-		msi2: msi@41a00 {
-			compatible = "fsl,mpic-msi";
-			reg = <0x41a00 0x200>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xf0 0 0 0
-				0xf1 0 0 0
-				0xf2 0 0 0
-				0xf3 0 0 0
-				0xf4 0 0 0
-				0xf5 0 0 0
-				0xf6 0 0 0
-				0xf7 0 0 0>;
-		};
-
-		guts: global-utilities@e0000 {
-			compatible = "fsl,qoriq-device-config-1.0";
-			reg = <0xe0000 0xe00>;
-			fsl,has-rstcr;
-			#sleep-cells = <1>;
-			fsl,liodn-bits = <12>;
-		};
-
-		pins: global-utilities@e0e00 {
-			compatible = "fsl,qoriq-pin-control-1.0";
-			reg = <0xe0e00 0x200>;
-			#sleep-cells = <2>;
-		};
-
-		clockgen: global-utilities@e1000 {
-			compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0";
-			reg = <0xe1000 0x1000>;
-			clock-frequency = <0>;
-		};
-
-		rcpm: global-utilities@e2000 {
-			compatible = "fsl,qoriq-rcpm-1.0";
-			reg = <0xe2000 0x1000>;
-			#sleep-cells = <1>;
-		};
-
-		sfp: sfp@e8000 {
-			compatible = "fsl,p2041-sfp", "fsl,qoriq-sfp-1.0";
-			reg	   = <0xe8000 0x1000>;
-		};
-
-		serdes: serdes@ea000 {
-			compatible = "fsl,p2041-serdes";
-			reg	   = <0xea000 0x1000>;
-		};
-
-		dma0: dma@100300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,p2041-dma", "fsl,eloplus-dma";
-			reg = <0x100300 0x4>;
-			ranges = <0x0 0x100100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,p2041-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupts = <28 2 0 0>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,p2041-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupts = <29 2 0 0>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,p2041-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupts = <30 2 0 0>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,p2041-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupts = <31 2 0 0>;
-			};
-		};
-
-		dma1: dma@101300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,p2041-dma", "fsl,eloplus-dma";
-			reg = <0x101300 0x4>;
-			ranges = <0x0 0x101100 0x200>;
-			cell-index = <1>;
-			dma-channel@0 {
-				compatible = "fsl,p2041-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupts = <32 2 0 0>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,p2041-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupts = <33 2 0 0>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,p2041-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupts = <34 2 0 0>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,p2041-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupts = <35 2 0 0>;
-			};
-		};
-
-		spi@110000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,p2041-espi", "fsl,mpc8536-espi";
-			reg = <0x110000 0x1000>;
-			interrupts = <53 0x2 0 0>;
-			fsl,espi-num-chipselects = <4>;
-		};
-
-		sdhc: sdhc@114000 {
-			compatible = "fsl,p2041-esdhc", "fsl,esdhc";
-			reg = <0x114000 0x1000>;
-			interrupts = <48 2 0 0>;
-			sdhci,auto-cmd12;
-			clock-frequency = <0>;
-		};
-
-		i2c@118000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x118000 0x100>;
-			interrupts = <38 2 0 0>;
-			dfsrr;
-		};
-
-		i2c@118100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x118100 0x100>;
-			interrupts = <38 2 0 0>;
-			dfsrr;
-		};
-
-		i2c@119000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <2>;
-			compatible = "fsl-i2c";
-			reg = <0x119000 0x100>;
-			interrupts = <39 2 0 0>;
-			dfsrr;
-		};
-
-		i2c@119100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <3>;
-			compatible = "fsl-i2c";
-			reg = <0x119100 0x100>;
-			interrupts = <39 2 0 0>;
-			dfsrr;
-		};
-
-		serial0: serial@11c500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x11c500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <36 2 0 0>;
-		};
-
-		serial1: serial@11c600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x11c600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <36 2 0 0>;
-		};
-
-		serial2: serial@11d500 {
-			cell-index = <2>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x11d500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <37 2 0 0>;
-		};
-
-		serial3: serial@11d600 {
-			cell-index = <3>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x11d600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <37 2 0 0>;
-		};
-
-		gpio0: gpio@130000 {
-			compatible = "fsl,p2041-gpio", "fsl,qoriq-gpio";
-			reg = <0x130000 0x1000>;
-			interrupts = <55 2 0 0>;
-			#gpio-cells = <2>;
-			gpio-controller;
-		};
-
-		usb0: usb@210000 {
-			compatible = "fsl,p2041-usb2-mph",
-					"fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
-			reg = <0x210000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <44 0x2 0 0>;
-			phy_type = "utmi";
-			port0;
-		};
-
-		usb1: usb@211000 {
-			compatible = "fsl,p2041-usb2-dr",
-					"fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
-			reg = <0x211000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <45 0x2 0 0>;
-			phy_type = "utmi";
-		};
-
-		sata@220000 {
-			compatible = "fsl,p2041-sata", "fsl,pq-sata-v2";
-			reg = <0x220000 0x1000>;
-			interrupts = <68 0x2 0 0>;
-		};
-
-		sata@221000 {
-			compatible = "fsl,p2041-sata", "fsl,pq-sata-v2";
-			reg = <0x221000 0x1000>;
-			interrupts = <69 0x2 0 0>;
-		};
-
-		crypto: crypto@300000 {
-			compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x300000 0x10000>;
-			ranges = <0 0x300000 0x10000>;
-			interrupts = <92 2 0 0>;
-
-			sec_jr0: jr@1000 {
-				compatible = "fsl,sec-v4.2-job-ring",
-					     "fsl,sec-v4.0-job-ring";
-				reg = <0x1000 0x1000>;
-				interrupts = <88 2 0 0>;
-			};
-
-			sec_jr1: jr@2000 {
-				compatible = "fsl,sec-v4.2-job-ring",
-					     "fsl,sec-v4.0-job-ring";
-				reg = <0x2000 0x1000>;
-				interrupts = <89 2 0 0>;
-			};
-
-			sec_jr2: jr@3000 {
-				compatible = "fsl,sec-v4.2-job-ring",
-					     "fsl,sec-v4.0-job-ring";
-				reg = <0x3000 0x1000>;
-				interrupts = <90 2 0 0>;
-			};
-
-			sec_jr3: jr@4000 {
-				compatible = "fsl,sec-v4.2-job-ring",
-					     "fsl,sec-v4.0-job-ring";
-				reg = <0x4000 0x1000>;
-				interrupts = <91 2 0 0>;
-			};
-
-			rtic@6000 {
-				compatible = "fsl,sec-v4.2-rtic",
-					     "fsl,sec-v4.0-rtic";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x6000 0x100>;
-				ranges = <0x0 0x6100 0xe00>;
-
-				rtic_a: rtic-a@0 {
-					compatible = "fsl,sec-v4.2-rtic-memory",
-						     "fsl,sec-v4.0-rtic-memory";
-					reg = <0x00 0x20 0x100 0x80>;
-				};
-
-				rtic_b: rtic-b@20 {
-					compatible = "fsl,sec-v4.2-rtic-memory",
-						     "fsl,sec-v4.0-rtic-memory";
-					reg = <0x20 0x20 0x200 0x80>;
-				};
-
-				rtic_c: rtic-c@40 {
-					compatible = "fsl,sec-v4.2-rtic-memory",
-						     "fsl,sec-v4.0-rtic-memory";
-					reg = <0x40 0x20 0x300 0x80>;
-				};
-
-				rtic_d: rtic-d@60 {
-					compatible = "fsl,sec-v4.2-rtic-memory",
-						     "fsl,sec-v4.0-rtic-memory";
-					reg = <0x60 0x20 0x500 0x80>;
-				};
-			};
-		};
-
-		sec_mon: sec_mon@314000 {
-			compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon";
-			reg = <0x314000 0x1000>;
-			interrupts = <93 2 0 0>;
-		};
-
-	};
-
-	localbus@ffe124000 {
-		compatible = "fsl,p2041-elbc", "fsl,elbc", "simple-bus";
-		interrupts = <25 2 0 0>;
-		#address-cells = <2>;
-		#size-cells = <1>;
-	};
-
-	pci0: pcie@ffe200000 {
-		compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
-		device_type = "pci";
-		#size-cells = <2>;
-		#address-cells = <3>;
-		bus-range = <0x0 0xff>;
-		clock-frequency = <33333333>;
-		fsl,msi = <&msi0>;
-		interrupts = <16 2 1 15>;
-		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			interrupts = <16 2 1 15>;
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map = <
-				/* IDSEL 0x0 */
-				0000 0 0 1 &mpic 40 1 0 0
-				0000 0 0 2 &mpic 1 1 0 0
-				0000 0 0 3 &mpic 2 1 0 0
-				0000 0 0 4 &mpic 3 1 0 0
-				>;
-		};
-	};
-
-	pci1: pcie@ffe201000 {
-		compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
-		device_type = "pci";
-		#size-cells = <2>;
-		#address-cells = <3>;
-		bus-range = <0 0xff>;
-		clock-frequency = <33333333>;
-		fsl,msi = <&msi1>;
-		interrupts = <16 2 1 14>;
-		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			interrupts = <16 2 1 14>;
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map = <
-				/* IDSEL 0x0 */
-				0000 0 0 1 &mpic 41 1 0 0
-				0000 0 0 2 &mpic 5 1 0 0
-				0000 0 0 3 &mpic 6 1 0 0
-				0000 0 0 4 &mpic 7 1 0 0
-				>;
-		};
-	};
-
-	pci2: pcie@ffe202000 {
-		compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
-		device_type = "pci";
-		#size-cells = <2>;
-		#address-cells = <3>;
-		bus-range = <0x0 0xff>;
-		clock-frequency = <33333333>;
-		fsl,msi = <&msi2>;
-		interrupts = <16 2 1 13>;
-		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			interrupts = <16 2 1 13>;
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map = <
-				/* IDSEL 0x0 */
-				0000 0 0 1 &mpic 42 1 0 0
-				0000 0 0 2 &mpic 9 1 0 0
-				0000 0 0 3 &mpic 10 1 0 0
-				0000 0 0 4 &mpic 11 1 0 0
-				>;
-		};
-	};
-};
diff --git a/arch/powerpc/boot/dts/p3041ds.dts b/arch/powerpc/boot/dts/p3041ds.dts
index bbd113b..f469145 100644
--- a/arch/powerpc/boot/dts/p3041ds.dts
+++ b/arch/powerpc/boot/dts/p3041ds.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "p3041si.dtsi"
+/include/ "fsl/p3041si-pre.dtsi"
 
 / {
 	model = "fsl,P3041DS";
@@ -50,6 +50,8 @@
 	};
 
 	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
 		spi@110000 {
 			flash@0 {
 				#address-cells = <1>;
@@ -99,7 +101,18 @@
 		};
 	};
 
-	localbus@ffe124000 {
+	rio: rapidio@ffe0c0000 {
+		reg = <0xf 0xfe0c0000 0 0x11000>;
+
+		port1 {
+			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+		};
+		port2 {
+			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+		};
+	};
+
+	lbc: localbus@ffe124000 {
 		reg = <0xf 0xfe124000 0 0x1000>;
 		ranges = <0 0 0xf 0xe8000000 0x08000000
 			  2 0 0xf 0xffa00000 0x00040000
@@ -160,6 +173,7 @@
 		reg = <0xf 0xfe200000 0 0x1000>;
 		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
 			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		fsl,msi = <&msi0>;
 		pcie@0 {
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000
@@ -175,6 +189,7 @@
 		reg = <0xf 0xfe201000 0 0x1000>;
 		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
 			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+		fsl,msi = <&msi1>;
 		pcie@0 {
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000
@@ -190,6 +205,7 @@
 		reg = <0xf 0xfe202000 0 0x1000>;
 		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
 			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		fsl,msi = <&msi2>;
 		pcie@0 {
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000
@@ -205,6 +221,7 @@
 		reg = <0xf 0xfe203000 0 0x1000>;
 		ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
 			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+		fsl,msi = <&msi2>;
 		pcie@0 {
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000
@@ -216,3 +233,5 @@
 		};
 	};
 };
+
+/include/ "fsl/p3041si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p3041si.dtsi b/arch/powerpc/boot/dts/p3041si.dtsi
deleted file mode 100644
index 87130b7..0000000
--- a/arch/powerpc/boot/dts/p3041si.dtsi
+++ /dev/null
@@ -1,729 +0,0 @@
-/*
- * P3041 Silicon Device Tree Source
- *
- * Copyright 2010-2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/ {
-	compatible = "fsl,P3041";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	aliases {
-		ccsr = &soc;
-		dcsr = &dcsr;
-
-		serial0 = &serial0;
-		serial1 = &serial1;
-		serial2 = &serial2;
-		serial3 = &serial3;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		pci2 = &pci2;
-		pci3 = &pci3;
-		usb0 = &usb0;
-		usb1 = &usb1;
-		dma0 = &dma0;
-		dma1 = &dma1;
-		sdhc = &sdhc;
-		msi0 = &msi0;
-		msi1 = &msi1;
-		msi2 = &msi2;
-
-		crypto = &crypto;
-		sec_jr0 = &sec_jr0;
-		sec_jr1 = &sec_jr1;
-		sec_jr2 = &sec_jr2;
-		sec_jr3 = &sec_jr3;
-		rtic_a = &rtic_a;
-		rtic_b = &rtic_b;
-		rtic_c = &rtic_c;
-		rtic_d = &rtic_d;
-		sec_mon = &sec_mon;
-
-/*
-		rio0 = &rapidio0;
- */
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: PowerPC,e500mc@0 {
-			device_type = "cpu";
-			reg = <0>;
-			next-level-cache = <&L2_0>;
-			L2_0: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-		cpu1: PowerPC,e500mc@1 {
-			device_type = "cpu";
-			reg = <1>;
-			next-level-cache = <&L2_1>;
-			L2_1: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-		cpu2: PowerPC,e500mc@2 {
-			device_type = "cpu";
-			reg = <2>;
-			next-level-cache = <&L2_2>;
-			L2_2: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-		cpu3: PowerPC,e500mc@3 {
-			device_type = "cpu";
-			reg = <3>;
-			next-level-cache = <&L2_3>;
-			L2_3: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-	};
-
-	dcsr: dcsr@f00000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,dcsr", "simple-bus";
-
-		dcsr-epu@0 {
-			compatible = "fsl,dcsr-epu";
-			interrupts = <52 2 0 0
-				      84 2 0 0
-				      85 2 0 0>;
-			interrupt-parent = <&mpic>;
-			reg = <0x0 0x1000>;
-		};
-		dcsr-npc {
-			compatible = "fsl,dcsr-npc";
-			reg = <0x1000 0x1000 0x1000000 0x8000>;
-		};
-		dcsr-nxc@2000 {
-			compatible = "fsl,dcsr-nxc";
-			reg = <0x2000 0x1000>;
-		};
-		dcsr-corenet {
-			compatible = "fsl,dcsr-corenet";
-			reg = <0x8000 0x1000 0xB0000 0x1000>;
-		};
-		dcsr-dpaa@9000 {
-			compatible = "fsl,p43041-dcsr-dpaa", "fsl,dcsr-dpaa";
-			reg = <0x9000 0x1000>;
-		};
-		dcsr-ocn@11000 {
-			compatible = "fsl,p43041-dcsr-ocn", "fsl,dcsr-ocn";
-			reg = <0x11000 0x1000>;
-		};
-		dcsr-ddr@12000 {
-			compatible = "fsl,dcsr-ddr";
-			dev-handle = <&ddr>;
-			reg = <0x12000 0x1000>;
-		};
-		dcsr-nal@18000 {
-			compatible = "fsl,p43041-dcsr-nal", "fsl,dcsr-nal";
-			reg = <0x18000 0x1000>;
-		};
-		dcsr-rcpm@22000 {
-			compatible = "fsl,p43041-dcsr-rcpm", "fsl,dcsr-rcpm";
-			reg = <0x22000 0x1000>;
-		};
-		dcsr-cpu-sb-proxy@40000 {
-			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-			cpu-handle = <&cpu0>;
-			reg = <0x40000 0x1000>;
-		};
-		dcsr-cpu-sb-proxy@41000 {
-			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-			cpu-handle = <&cpu1>;
-			reg = <0x41000 0x1000>;
-		};
-		dcsr-cpu-sb-proxy@42000 {
-			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-			cpu-handle = <&cpu2>;
-			reg = <0x42000 0x1000>;
-		};
-		dcsr-cpu-sb-proxy@43000 {
-			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-			cpu-handle = <&cpu3>;
-			reg = <0x43000 0x1000>;
-		};
-	};
-
-	soc: soc@ffe000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
-		reg = <0xf 0xfe000000 0 0x00001000>;
-
-		soc-sram-error {
-			compatible = "fsl,soc-sram-error";
-			interrupts = <16 2 1 29>;
-		};
-
-		corenet-law@0 {
-			compatible = "fsl,corenet-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <32>;
-		};
-
-		ddr: memory-controller@8000 {
-			compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
-			reg = <0x8000 0x1000>;
-			interrupts = <16 2 1 23>;
-		};
-
-		cpc: l3-cache-controller@10000 {
-			compatible = "fsl,p3041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
-			reg = <0x10000 0x1000>;
-			interrupts = <16 2 1 27>;
-		};
-
-		corenet-cf@18000 {
-			compatible = "fsl,corenet-cf";
-			reg = <0x18000 0x1000>;
-			interrupts = <16 2 1 31>;
-			fsl,ccf-num-csdids = <32>;
-			fsl,ccf-num-snoopids = <32>;
-		};
-
-		iommu@20000 {
-			compatible = "fsl,pamu-v1.0", "fsl,pamu";
-			reg = <0x20000 0x4000>;
-			interrupts = <
-				24 2 0 0
-				16 2 1 30>;
-		};
-
-		mpic: pic@40000 {
-			clock-frequency = <0>;
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <4>;
-			reg = <0x40000 0x40000>;
-			compatible = "fsl,mpic", "chrp,open-pic";
-			device_type = "open-pic";
-		};
-
-		msi0: msi@41600 {
-			compatible = "fsl,mpic-msi";
-			reg = <0x41600 0x200>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe0 0 0 0
-				0xe1 0 0 0
-				0xe2 0 0 0
-				0xe3 0 0 0
-				0xe4 0 0 0
-				0xe5 0 0 0
-				0xe6 0 0 0
-				0xe7 0 0 0>;
-		};
-
-		msi1: msi@41800 {
-			compatible = "fsl,mpic-msi";
-			reg = <0x41800 0x200>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe8 0 0 0
-				0xe9 0 0 0
-				0xea 0 0 0
-				0xeb 0 0 0
-				0xec 0 0 0
-				0xed 0 0 0
-				0xee 0 0 0
-				0xef 0 0 0>;
-		};
-
-		msi2: msi@41a00 {
-			compatible = "fsl,mpic-msi";
-			reg = <0x41a00 0x200>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xf0 0 0 0
-				0xf1 0 0 0
-				0xf2 0 0 0
-				0xf3 0 0 0
-				0xf4 0 0 0
-				0xf5 0 0 0
-				0xf6 0 0 0
-				0xf7 0 0 0>;
-		};
-
-		guts: global-utilities@e0000 {
-			compatible = "fsl,qoriq-device-config-1.0";
-			reg = <0xe0000 0xe00>;
-			fsl,has-rstcr;
-			#sleep-cells = <1>;
-			fsl,liodn-bits = <12>;
-		};
-
-		pins: global-utilities@e0e00 {
-			compatible = "fsl,qoriq-pin-control-1.0";
-			reg = <0xe0e00 0x200>;
-			#sleep-cells = <2>;
-		};
-
-		clockgen: global-utilities@e1000 {
-			compatible = "fsl,p3041-clockgen", "fsl,qoriq-clockgen-1.0";
-			reg = <0xe1000 0x1000>;
-			clock-frequency = <0>;
-		};
-
-		rcpm: global-utilities@e2000 {
-			compatible = "fsl,qoriq-rcpm-1.0";
-			reg = <0xe2000 0x1000>;
-			#sleep-cells = <1>;
-		};
-
-		sfp: sfp@e8000 {
-			compatible = "fsl,p3041-sfp", "fsl,qoriq-sfp-1.0";
-			reg	   = <0xe8000 0x1000>;
-		};
-
-		serdes: serdes@ea000 {
-			compatible = "fsl,p3041-serdes";
-			reg	   = <0xea000 0x1000>;
-		};
-
-		dma0: dma@100300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,p3041-dma", "fsl,eloplus-dma";
-			reg = <0x100300 0x4>;
-			ranges = <0x0 0x100100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,p3041-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupts = <28 2 0 0>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,p3041-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupts = <29 2 0 0>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,p3041-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupts = <30 2 0 0>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,p3041-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupts = <31 2 0 0>;
-			};
-		};
-
-		dma1: dma@101300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,p3041-dma", "fsl,eloplus-dma";
-			reg = <0x101300 0x4>;
-			ranges = <0x0 0x101100 0x200>;
-			cell-index = <1>;
-			dma-channel@0 {
-				compatible = "fsl,p3041-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupts = <32 2 0 0>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,p3041-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupts = <33 2 0 0>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,p3041-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupts = <34 2 0 0>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,p3041-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupts = <35 2 0 0>;
-			};
-		};
-
-		spi@110000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,p3041-espi", "fsl,mpc8536-espi";
-			reg = <0x110000 0x1000>;
-			interrupts = <53 0x2 0 0>;
-			fsl,espi-num-chipselects = <4>;
-		};
-
-		sdhc: sdhc@114000 {
-			compatible = "fsl,p3041-esdhc", "fsl,esdhc";
-			reg = <0x114000 0x1000>;
-			interrupts = <48 2 0 0>;
-			sdhci,auto-cmd12;
-			clock-frequency = <0>;
-		};
-
-		i2c@118000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x118000 0x100>;
-			interrupts = <38 2 0 0>;
-			dfsrr;
-		};
-
-		i2c@118100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x118100 0x100>;
-			interrupts = <38 2 0 0>;
-			dfsrr;
-		};
-
-		i2c@119000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <2>;
-			compatible = "fsl-i2c";
-			reg = <0x119000 0x100>;
-			interrupts = <39 2 0 0>;
-			dfsrr;
-		};
-
-		i2c@119100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <3>;
-			compatible = "fsl-i2c";
-			reg = <0x119100 0x100>;
-			interrupts = <39 2 0 0>;
-			dfsrr;
-		};
-
-		serial0: serial@11c500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x11c500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <36 2 0 0>;
-		};
-
-		serial1: serial@11c600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x11c600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <36 2 0 0>;
-		};
-
-		serial2: serial@11d500 {
-			cell-index = <2>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x11d500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <37 2 0 0>;
-		};
-
-		serial3: serial@11d600 {
-			cell-index = <3>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x11d600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <37 2 0 0>;
-		};
-
-		gpio0: gpio@130000 {
-			compatible = "fsl,p3041-gpio", "fsl,qoriq-gpio";
-			reg = <0x130000 0x1000>;
-			interrupts = <55 2 0 0>;
-			#gpio-cells = <2>;
-			gpio-controller;
-		};
-
-		usb0: usb@210000 {
-			compatible = "fsl,p3041-usb2-mph",
-					"fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
-			reg = <0x210000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <44 0x2 0 0>;
-			phy_type = "utmi";
-			port0;
-		};
-
-		usb1: usb@211000 {
-			compatible = "fsl,p3041-usb2-dr",
-					"fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
-			reg = <0x211000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <45 0x2 0 0>;
-			dr_mode = "host";
-			phy_type = "utmi";
-		};
-
-		sata@220000 {
-			compatible = "fsl,p3041-sata", "fsl,pq-sata-v2";
-			reg = <0x220000 0x1000>;
-			interrupts = <68 0x2 0 0>;
-		};
-
-		sata@221000 {
-			compatible = "fsl,p3041-sata", "fsl,pq-sata-v2";
-			reg = <0x221000 0x1000>;
-			interrupts = <69 0x2 0 0>;
-		};
-
-		crypto: crypto@300000 {
-			compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg		 = <0x300000 0x10000>;
-			ranges		 = <0 0x300000 0x10000>;
-			interrupts	 = <92 2 0 0>;
-
-			sec_jr0: jr@1000 {
-				compatible = "fsl,sec-v4.2-job-ring",
-					     "fsl,sec-v4.0-job-ring";
-				reg = <0x1000 0x1000>;
-				interrupts = <88 2 0 0>;
-			};
-
-			sec_jr1: jr@2000 {
-				compatible = "fsl,sec-v4.2-job-ring",
-					     "fsl,sec-v4.0-job-ring";
-				reg = <0x2000 0x1000>;
-				interrupts = <89 2 0 0>;
-			};
-
-			sec_jr2: jr@3000 {
-				compatible = "fsl,sec-v4.2-job-ring",
-					     "fsl,sec-v4.0-job-ring";
-				reg = <0x3000 0x1000>;
-				interrupts = <90 2 0 0>;
-			};
-
-			sec_jr3: jr@4000 {
-				compatible = "fsl,sec-v4.2-job-ring",
-					     "fsl,sec-v4.0-job-ring";
-				reg = <0x4000 0x1000>;
-				interrupts = <91 2 0 0>;
-			};
-
-			rtic@6000 {
-				compatible = "fsl,sec-v4.2-rtic",
-					     "fsl,sec-v4.0-rtic";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x6000 0x100>;
-				ranges = <0x0 0x6100 0xe00>;
-
-				rtic_a: rtic-a@0 {
-					compatible = "fsl,sec-v4.2-rtic-memory",
-						     "fsl,sec-v4.0-rtic-memory";
-					reg = <0x00 0x20 0x100 0x80>;
-				};
-
-				rtic_b: rtic-b@20 {
-					compatible = "fsl,sec-v4.2-rtic-memory",
-						     "fsl,sec-v4.0-rtic-memory";
-					reg = <0x20 0x20 0x200 0x80>;
-				};
-
-				rtic_c: rtic-c@40 {
-					compatible = "fsl,sec-v4.2-rtic-memory",
-						     "fsl,sec-v4.0-rtic-memory";
-					reg = <0x40 0x20 0x300 0x80>;
-				};
-
-				rtic_d: rtic-d@60 {
-					compatible = "fsl,sec-v4.2-rtic-memory",
-						     "fsl,sec-v4.0-rtic-memory";
-					reg = <0x60 0x20 0x500 0x80>;
-				};
-			};
-		};
-
-		sec_mon: sec_mon@314000 {
-			compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon";
-			reg = <0x314000 0x1000>;
-			interrupts = <93 2 0 0>;
-		};
-	};
-
-/*
-	rapidio0: rapidio@ffe0c0000
-*/
-
-	localbus@ffe124000 {
-		compatible = "fsl,p3041-elbc", "fsl,elbc", "simple-bus";
-		interrupts = <25 2 0 0>;
-		#address-cells = <2>;
-		#size-cells = <1>;
-	};
-
-	pci0: pcie@ffe200000 {
-		compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
-		device_type = "pci";
-		#size-cells = <2>;
-		#address-cells = <3>;
-		bus-range = <0x0 0xff>;
-		clock-frequency = <0x1fca055>;
-		fsl,msi = <&msi0>;
-		interrupts = <16 2 1 15>;
-
-		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			interrupts = <16 2 1 15>;
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map = <
-				/* IDSEL 0x0 */
-				0000 0 0 1 &mpic 40 1 0 0
-				0000 0 0 2 &mpic 1 1 0 0
-				0000 0 0 3 &mpic 2 1 0 0
-				0000 0 0 4 &mpic 3 1 0 0
-				>;
-		};
-	};
-
-	pci1: pcie@ffe201000 {
-		compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
-		device_type = "pci";
-		#size-cells = <2>;
-		#address-cells = <3>;
-		bus-range = <0 0xff>;
-		clock-frequency = <0x1fca055>;
-		fsl,msi = <&msi1>;
-		interrupts = <16 2 1 14>;
-		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			interrupts = <16 2 1 14>;
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map = <
-				/* IDSEL 0x0 */
-				0000 0 0 1 &mpic 41 1 0 0
-				0000 0 0 2 &mpic 5 1 0 0
-				0000 0 0 3 &mpic 6 1 0 0
-				0000 0 0 4 &mpic 7 1 0 0
-				>;
-		};
-	};
-
-	pci2: pcie@ffe202000 {
-		compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
-		device_type = "pci";
-		#size-cells = <2>;
-		#address-cells = <3>;
-		bus-range = <0x0 0xff>;
-		clock-frequency = <0x1fca055>;
-		fsl,msi = <&msi2>;
-		interrupts = <16 2 1 13>;
-		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			interrupts = <16 2 1 13>;
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map = <
-				/* IDSEL 0x0 */
-				0000 0 0 1 &mpic 42 1 0 0
-				0000 0 0 2 &mpic 9 1 0 0
-				0000 0 0 3 &mpic 10 1 0 0
-				0000 0 0 4 &mpic 11 1 0 0
-				>;
-		};
-	};
-
-	pci3: pcie@ffe203000 {
-		compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
-		device_type = "pci";
-		#size-cells = <2>;
-		#address-cells = <3>;
-		bus-range = <0x0 0xff>;
-		clock-frequency = <0x1fca055>;
-		fsl,msi = <&msi2>;
-		interrupts = <16 2 1 12>;
-		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			interrupts = <16 2 1 12>;
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map = <
-				/* IDSEL 0x0 */
-				0000 0 0 1 &mpic 43 1 0 0
-				0000 0 0 2 &mpic 0 1 0 0
-				0000 0 0 3 &mpic 4 1 0 0
-				0000 0 0 4 &mpic 8 1 0 0
-				>;
-		};
-	};
-};
diff --git a/arch/powerpc/boot/dts/p3060qds.dts b/arch/powerpc/boot/dts/p3060qds.dts
index 08b9193..529042e 100644
--- a/arch/powerpc/boot/dts/p3060qds.dts
+++ b/arch/powerpc/boot/dts/p3060qds.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "p3060si.dtsi"
+/include/ "fsl/p3060si-pre.dtsi"
 
 / {
 	model = "fsl,P3060QDS";
@@ -50,6 +50,8 @@
 	};
 
 	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
 		spi@110000 {
 			flash@0 {
 				#address-cells = <1>;
@@ -138,7 +140,7 @@
 		};
 	};
 
-	rapidio@ffe0c0000 {
+	rio: rapidio@ffe0c0000 {
 		reg = <0xf 0xfe0c0000 0 0x11000>;
 
 		port1 {
@@ -149,7 +151,7 @@
 		};
 	};
 
-	localbus@ffe124000 {
+	lbc: localbus@ffe124000 {
 		reg = <0xf 0xfe124000 0 0x1000>;
 		ranges = <0 0 0xf 0xe8000000 0x08000000
 			  2 0 0xf 0xffa00000 0x00040000
@@ -210,6 +212,7 @@
 		reg = <0xf 0xfe200000 0 0x1000>;
 		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
 			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		fsl,msi = <&msi0>;
 		pcie@0 {
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000
@@ -225,6 +228,7 @@
 		reg = <0xf 0xfe201000 0 0x1000>;
 		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
 			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+		fsl,msi = <&msi1>;
 		pcie@0 {
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000
@@ -236,3 +240,5 @@
 		};
 	};
 };
+
+/include/ "fsl/p3060si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p3060si.dtsi b/arch/powerpc/boot/dts/p3060si.dtsi
deleted file mode 100644
index 68947e1..0000000
--- a/arch/powerpc/boot/dts/p3060si.dtsi
+++ /dev/null
@@ -1,719 +0,0 @@
-/*
- * P3060 Silicon Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/ {
-	compatible = "fsl,P3060";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	aliases {
-		ccsr = &soc;
-		dcsr = &dcsr;
-
-		serial0 = &serial0;
-		serial1 = &serial1;
-		serial2 = &serial2;
-		serial3 = &serial3;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		usb0 = &usb0;
-		usb1 = &usb1;
-		dma0 = &dma0;
-		dma1 = &dma1;
-		msi0 = &msi0;
-		msi1 = &msi1;
-		msi2 = &msi2;
-
-		crypto = &crypto;
-		sec_jr0 = &sec_jr0;
-		sec_jr1 = &sec_jr1;
-		sec_jr2 = &sec_jr2;
-		sec_jr3 = &sec_jr3;
-		rtic_a = &rtic_a;
-		rtic_b = &rtic_b;
-		rtic_c = &rtic_c;
-		rtic_d = &rtic_d;
-		sec_mon = &sec_mon;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: PowerPC,e500mc@0 {
-			device_type = "cpu";
-			reg = <0>;
-			next-level-cache = <&L2_0>;
-			L2_0: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-		cpu1: PowerPC,e500mc@1 {
-			device_type = "cpu";
-			reg = <1>;
-			next-level-cache = <&L2_1>;
-			L2_1: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-		cpu4: PowerPC,e500mc@4 {
-			device_type = "cpu";
-			reg = <4>;
-			next-level-cache = <&L2_4>;
-			L2_4: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-		cpu5: PowerPC,e500mc@5 {
-			device_type = "cpu";
-			reg = <5>;
-			next-level-cache = <&L2_5>;
-			L2_5: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-		cpu6: PowerPC,e500mc@6 {
-			device_type = "cpu";
-			reg = <6>;
-			next-level-cache = <&L2_6>;
-			L2_6: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-		cpu7: PowerPC,e500mc@7 {
-			device_type = "cpu";
-			reg = <7>;
-			next-level-cache = <&L2_7>;
-			L2_7: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-	};
-
-	dcsr: dcsr@f00000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,dcsr", "simple-bus";
-
-		dcsr-epu@0 {
-			compatible = "fsl,dcsr-epu";
-			interrupts = <52 2 0 0
-				      84 2 0 0
-				      85 2 0 0>;
-			interrupt-parent = <&mpic>;
-			reg = <0x0 0x1000>;
-		};
-		dcsr-npc {
-			compatible = "fsl,dcsr-npc";
-			reg = <0x1000 0x1000 0x1000000 0x8000>;
-		};
-		dcsr-nxc@2000 {
-			compatible = "fsl,dcsr-nxc";
-			reg = <0x2000 0x1000>;
-		};
-		dcsr-corenet {
-			compatible = "fsl,dcsr-corenet";
-			reg = <0x8000 0x1000 0xB0000 0x1000>;
-		};
-		dcsr-dpaa@9000 {
-			compatible = "fsl,p3060-dcsr-dpaa", "fsl,dcsr-dpaa";
-			reg = <0x9000 0x1000>;
-		};
-		dcsr-ocn@11000 {
-			compatible = "fsl,p3060-dcsr-ocn", "fsl,dcsr-ocn";
-			reg = <0x11000 0x1000>;
-		};
-		dcsr-ddr@12000 {
-			compatible = "fsl,dcsr-ddr";
-			dev-handle = <&ddr>;
-			reg = <0x12000 0x1000>;
-		};
-		dcsr-nal@18000 {
-			compatible = "fsl,p3060-dcsr-nal", "fsl,dcsr-nal";
-			reg = <0x18000 0x1000>;
-		};
-		dcsr-rcpm@22000 {
-			compatible = "fsl,p3060-dcsr-rcpm", "fsl,dcsr-rcpm";
-			reg = <0x22000 0x1000>;
-		};
-		dcsr-cpu-sb-proxy@40000 {
-			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-			cpu-handle = <&cpu0>;
-			reg = <0x40000 0x1000>;
-		};
-		dcsr-cpu-sb-proxy@41000 {
-			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-			cpu-handle = <&cpu1>;
-			reg = <0x41000 0x1000>;
-		};
-		dcsr-cpu-sb-proxy@44000 {
-			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-			cpu-handle = <&cpu4>;
-			reg = <0x44000 0x1000>;
-		};
-		dcsr-cpu-sb-proxy@45000 {
-			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-			cpu-handle = <&cpu5>;
-			reg = <0x45000 0x1000>;
-		};
-		dcsr-cpu-sb-proxy@46000 {
-			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-			cpu-handle = <&cpu6>;
-			reg = <0x46000 0x1000>;
-		};
-		dcsr-cpu-sb-proxy@47000 {
-			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-			cpu-handle = <&cpu7>;
-			reg = <0x47000 0x1000>;
-		};
-	};
-
-	soc: soc@ffe000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
-		reg = <0xf 0xfe000000 0 0x00001000>;
-
-		soc-sram-error {
-			compatible = "fsl,soc-sram-error";
-			interrupts = <16 2 1 29>;
-		};
-
-		corenet-law@0 {
-			compatible = "fsl,corenet-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <32>;
-		};
-
-		ddr: memory-controller@8000 {
-			compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
-			reg = <0x8000 0x1000>;
-			interrupts = <16 2 1 23>;
-		};
-
-		cpc: l3-cache-controller@10000 {
-			compatible = "fsl,p3060-l3-cache-controller", "cache";
-			reg = <0x10000 0x1000
-			       0x11000 0x1000>;
-			interrupts = <16 2 1 27>;
-		};
-
-		corenet-cf@18000 {
-			compatible = "fsl,corenet-cf";
-			reg = <0x18000 0x1000>;
-			interrupts = <16 2 1 31>;
-			fsl,ccf-num-csdids = <32>;
-			fsl,ccf-num-snoopids = <32>;
-		};
-
-		iommu@20000 {
-			compatible = "fsl,pamu-v1.0", "fsl,pamu";
-			reg = <0x20000 0x5000>;
-			interrupts = <
-				24 2 0 0
-				16 2 1 30>;
-		};
-
-		mpic: pic@40000 {
-			clock-frequency = <0>;
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <4>;
-			reg = <0x40000 0x40000>;
-			compatible = "fsl,mpic", "chrp,open-pic";
-			device_type = "open-pic";
-		};
-
-		msi0: msi@41600 {
-			compatible = "fsl,mpic-msi";
-			reg = <0x41600 0x200>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe0 0 0 0
-				0xe1 0 0 0
-				0xe2 0 0 0
-				0xe3 0 0 0
-				0xe4 0 0 0
-				0xe5 0 0 0
-				0xe6 0 0 0
-				0xe7 0 0 0>;
-		};
-
-		msi1: msi@41800 {
-			compatible = "fsl,mpic-msi";
-			reg = <0x41800 0x200>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe8 0 0 0
-				0xe9 0 0 0
-				0xea 0 0 0
-				0xeb 0 0 0
-				0xec 0 0 0
-				0xed 0 0 0
-				0xee 0 0 0
-				0xef 0 0 0>;
-		};
-
-		msi2: msi@41a00 {
-			compatible = "fsl,mpic-msi";
-			reg = <0x41a00 0x200>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xf0 0 0 0
-				0xf1 0 0 0
-				0xf2 0 0 0
-				0xf3 0 0 0
-				0xf4 0 0 0
-				0xf5 0 0 0
-				0xf6 0 0 0
-				0xf7 0 0 0>;
-		};
-
-		rmu: rmu@d3000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,srio-rmu";
-			reg = <0xd3000 0x500>;
-			ranges = <0x0 0xd3000 0x500>;
-
-			message-unit@0 {
-				compatible = "fsl,srio-msg-unit";
-				reg = <0x0 0x100>;
-				interrupts = <
-					60 2 0 0  /* msg1_tx_irq */
-					61 2 0 0>;/* msg1_rx_irq */
-			};
-			message-unit@100 {
-				compatible = "fsl,srio-msg-unit";
-				reg = <0x100 0x100>;
-				interrupts = <
-					62 2 0 0  /* msg2_tx_irq */
-					63 2 0 0>;/* msg2_rx_irq */
-			};
-			doorbell-unit@400 {
-				compatible = "fsl,srio-dbell-unit";
-				reg = <0x400 0x80>;
-				interrupts = <
-					56 2 0 0  /* bell_outb_irq */
-					57 2 0 0>;/* bell_inb_irq */
-			};
-			port-write-unit@4e0 {
-				compatible = "fsl,srio-port-write-unit";
-				reg = <0x4e0 0x20>;
-				interrupts = <16 2 1 11>;
-			};
-		};
-
-		guts: global-utilities@e0000 {
-			compatible = "fsl,qoriq-device-config-1.0";
-			reg = <0xe0000 0xe00>;
-			fsl,has-rstcr;
-			#sleep-cells = <1>;
-			fsl,liodn-bits = <12>;
-		};
-
-		pins: global-utilities@e0e00 {
-			compatible = "fsl,qoriq-pin-control-1.0";
-			reg = <0xe0e00 0x200>;
-			#sleep-cells = <2>;
-		};
-
-		clockgen: global-utilities@e1000 {
-			compatible = "fsl,p3060-clockgen", "fsl,qoriq-clockgen-1.0";
-			reg = <0xe1000 0x1000>;
-			clock-frequency = <0>;
-		};
-
-		rcpm: global-utilities@e2000 {
-			compatible = "fsl,qoriq-rcpm-1.0";
-			reg = <0xe2000 0x1000>;
-			#sleep-cells = <1>;
-		};
-
-		sfp: sfp@e8000 {
-			compatible = "fsl,p3060-sfp", "fsl,qoriq-sfp-1.0";
-			reg	   = <0xe8000 0x1000>;
-		};
-
-		serdes: serdes@ea000 {
-			compatible = "fsl,p3060-serdes";
-			reg	   = <0xea000 0x1000>;
-		};
-
-		dma0: dma@100300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,p3060-dma", "fsl,eloplus-dma";
-			reg = <0x100300 0x4>;
-			ranges = <0x0 0x100100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,p3060-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupts = <28 2 0 0>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,p3060-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupts = <29 2 0 0>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,p3060-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupts = <30 2 0 0>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,p3060-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupts = <31 2 0 0>;
-			};
-		};
-
-		dma1: dma@101300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,p3060-dma", "fsl,eloplus-dma";
-			reg = <0x101300 0x4>;
-			ranges = <0x0 0x101100 0x200>;
-			cell-index = <1>;
-			dma-channel@0 {
-				compatible = "fsl,p3060-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupts = <32 2 0 0>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,p3060-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupts = <33 2 0 0>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,p3060-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupts = <34 2 0 0>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,p3060-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupts = <35 2 0 0>;
-			};
-		};
-
-		spi@110000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,p3060-espi", "fsl,mpc8536-espi";
-			reg = <0x110000 0x1000>;
-			interrupts = <53 0x2 0 0>;
-			fsl,espi-num-chipselects = <4>;
-		};
-
-		i2c@118000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x118000 0x100>;
-			interrupts = <38 2 0 0>;
-			dfsrr;
-		};
-
-		i2c@118100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x118100 0x100>;
-			interrupts = <38 2 0 0>;
-			dfsrr;
-		};
-
-		i2c@119000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <2>;
-			compatible = "fsl-i2c";
-			reg = <0x119000 0x100>;
-			interrupts = <39 2 0 0>;
-			dfsrr;
-		};
-
-		i2c@119100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <3>;
-			compatible = "fsl-i2c";
-			reg = <0x119100 0x100>;
-			interrupts = <39 2 0 0>;
-			dfsrr;
-		};
-
-		serial0: serial@11c500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x11c500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <36 2 0 0>;
-		};
-
-		serial1: serial@11c600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x11c600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <36 2 0 0>;
-		};
-
-		serial2: serial@11d500 {
-			cell-index = <2>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x11d500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <37 2 0 0>;
-		};
-
-		serial3: serial@11d600 {
-			cell-index = <3>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x11d600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <37 2 0 0>;
-		};
-
-		gpio0: gpio@130000 {
-			compatible = "fsl,p3060-gpio", "fsl,qoriq-gpio";
-			reg = <0x130000 0x1000>;
-			interrupts = <55 2 0 0>;
-			#gpio-cells = <2>;
-			gpio-controller;
-		};
-
-		usb0: usb@210000 {
-			compatible = "fsl,p3060-usb2-mph",
-					"fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
-			reg = <0x210000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <44 0x2 0 0>;
-		};
-
-		usb1: usb@211000 {
-			compatible = "fsl,p3060-usb2-dr",
-					"fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
-			reg = <0x211000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <45 0x2 0 0>;
-		};
-
-		crypto: crypto@300000 {
-			compatible = "fsl,sec-v4.1", "fsl,sec-v4.0";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x300000 0x10000>;
-			ranges = <0 0x300000 0x10000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <92 2 0 0>;
-
-			sec_jr0: jr@1000 {
-				compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
-				reg = <0x1000 0x1000>;
-				interrupt-parent = <&mpic>;
-				interrupts = <88 2 0 0>;
-			};
-
-			sec_jr1: jr@2000 {
-				compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
-				reg = <0x2000 0x1000>;
-				interrupt-parent = <&mpic>;
-				interrupts = <89 2 0 0>;
-			};
-
-			sec_jr2: jr@3000 {
-				compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
-				reg = <0x3000 0x1000>;
-				interrupt-parent = <&mpic>;
-				interrupts = <90 2 0 0>;
-			};
-
-			sec_jr3: jr@4000 {
-				compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
-				reg = <0x4000 0x1000>;
-				interrupt-parent = <&mpic>;
-				interrupts = <91 2 0 0>;
-			};
-
-			rtic@6000 {
-				compatible = "fsl,sec-v4.1-rtic", "fsl,sec-v4.0-rtic";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x6000 0x100>;
-				ranges = <0x0 0x6100 0xe00>;
-
-				rtic_a: rtic-a@0 {
-					compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
-					reg = <0x00 0x20 0x100 0x80>;
-				};
-
-				rtic_b: rtic-b@20 {
-					compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
-					reg = <0x20 0x20 0x200 0x80>;
-				};
-
-				rtic_c: rtic-c@40 {
-					compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
-					reg = <0x40 0x20 0x300 0x80>;
-				};
-
-				rtic_d: rtic-d@60 {
-					compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
-					reg = <0x60 0x20 0x500 0x80>;
-				};
-			};
-		};
-
-		sec_mon: sec_mon@314000 {
-			compatible = "fsl,sec-v4.1-mon", "fsl,sec-v4.0-mon";
-			reg = <0x314000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <93 2 0 0>;
-		};
-	};
-
-	rapidio@ffe0c0000 {
-		compatible = "fsl,srio";
-		interrupts = <16 2 1 11>;
-		#address-cells = <2>;
-		#size-cells = <2>;
-		fsl,srio-rmu-handle = <&rmu>;
-		ranges;
-
-		port1 {
-			#address-cells = <2>;
-			#size-cells = <2>;
-			cell-index = <1>;
-		};
-
-		port2 {
-			#address-cells = <2>;
-			#size-cells = <2>;
-			cell-index = <2>;
-		};
-	};
-
-	localbus@ffe124000 {
-		compatible = "fsl,p3060-elbc", "fsl,elbc", "simple-bus";
-		interrupts = <25 2 0 0>;
-		#address-cells = <2>;
-		#size-cells = <1>;
-	};
-
-	pci0: pcie@ffe200000 {
-		compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
-		device_type = "pci";
-		#size-cells = <2>;
-		#address-cells = <3>;
-		bus-range = <0x0 0xff>;
-		clock-frequency = <33333333>;
-		fsl,msi = <&msi0>;
-		interrupts = <16 2 1 15>;
-		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			interrupts = <16 2 1 15>;
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map = <
-				/* IDSEL 0x0 */
-				0000 0 0 1 &mpic 40 1 0 0
-				0000 0 0 2 &mpic 1 1 0 0
-				0000 0 0 3 &mpic 2 1 0 0
-				0000 0 0 4 &mpic 3 1 0 0
-				>;
-		};
-	};
-
-	pci1: pcie@ffe201000 {
-		compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
-		device_type = "pci";
-		#size-cells = <2>;
-		#address-cells = <3>;
-		bus-range = <0 0xff>;
-		clock-frequency = <33333333>;
-		fsl,msi = <&msi1>;
-		interrupts = <16 2 1 14>;
-		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			interrupts = <16 2 1 14>;
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map = <
-				/* IDSEL 0x0 */
-				0000 0 0 1 &mpic 41 1 0 0
-				0000 0 0 2 &mpic 5 1 0 0
-				0000 0 0 3 &mpic 6 1 0 0
-				0000 0 0 4 &mpic 7 1 0 0
-				>;
-		};
-	};
-};
diff --git a/arch/powerpc/boot/dts/p4080ds.dts b/arch/powerpc/boot/dts/p4080ds.dts
index c7916dc2..6d60e54 100644
--- a/arch/powerpc/boot/dts/p4080ds.dts
+++ b/arch/powerpc/boot/dts/p4080ds.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "p4080si.dtsi"
+/include/ "fsl/p4080si-pre.dtsi"
 
 / {
 	model = "fsl,P4080DS";
@@ -50,6 +50,9 @@
 	};
 
 	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+
 		spi@110000 {
 			flash@0 {
 				#address-cells = <1>;
@@ -105,12 +108,18 @@
 		};
 	};
 
-	rapidio0: rapidio@ffe0c0000 {
-		reg = <0xf 0xfe0c0000 0 0x20000>;
-		ranges = <0 0 0xc 0x20000000 0 0x01000000>;
+	rio: rapidio@ffe0c0000 {
+		reg = <0xf 0xfe0c0000 0 0x11000>;
+
+		port1 {
+			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+		};
+		port2 {
+			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+		};
 	};
 
-	localbus@ffe124000 {
+	lbc: localbus@ffe124000 {
 		reg = <0xf 0xfe124000 0 0x1000>;
 		ranges = <0 0 0xf 0xe8000000 0x08000000
 			  3 0 0xf 0xffdf0000 0x00008000>;
@@ -132,6 +141,7 @@
 		reg = <0xf 0xfe200000 0 0x1000>;
 		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
 			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		fsl,msi = <&msi0>;
 		pcie@0 {
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000
@@ -147,6 +157,7 @@
 		reg = <0xf 0xfe201000 0 0x1000>;
 		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
 			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+		fsl,msi = <&msi1>;
 		pcie@0 {
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000
@@ -162,6 +173,7 @@
 		reg = <0xf 0xfe202000 0 0x1000>;
 		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
 			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		fsl,msi = <&msi2>;
 		pcie@0 {
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000
@@ -174,3 +186,5 @@
 	};
 
 };
+
+/include/ "fsl/p4080si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p4080si.dtsi b/arch/powerpc/boot/dts/p4080si.dtsi
deleted file mode 100644
index f20c01a..0000000
--- a/arch/powerpc/boot/dts/p4080si.dtsi
+++ /dev/null
@@ -1,755 +0,0 @@
-/*
- * P4080 Silicon Device Tree Source
- *
- * Copyright 2009-2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/ {
-	compatible = "fsl,P4080";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	aliases {
-		ccsr = &soc;
-		dcsr = &dcsr;
-
-		serial0 = &serial0;
-		serial1 = &serial1;
-		serial2 = &serial2;
-		serial3 = &serial3;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		pci2 = &pci2;
-		usb0 = &usb0;
-		usb1 = &usb1;
-		dma0 = &dma0;
-		dma1 = &dma1;
-		sdhc = &sdhc;
-		msi0 = &msi0;
-		msi1 = &msi1;
-		msi2 = &msi2;
-
-		crypto = &crypto;
-		sec_jr0 = &sec_jr0;
-		sec_jr1 = &sec_jr1;
-		sec_jr2 = &sec_jr2;
-		sec_jr3 = &sec_jr3;
-		rtic_a = &rtic_a;
-		rtic_b = &rtic_b;
-		rtic_c = &rtic_c;
-		rtic_d = &rtic_d;
-		sec_mon = &sec_mon;
-
-		rio0 = &rapidio0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: PowerPC,e500mc@0 {
-			device_type = "cpu";
-			reg = <0>;
-			next-level-cache = <&L2_0>;
-			L2_0: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-		cpu1: PowerPC,e500mc@1 {
-			device_type = "cpu";
-			reg = <1>;
-			next-level-cache = <&L2_1>;
-			L2_1: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-		cpu2: PowerPC,e500mc@2 {
-			device_type = "cpu";
-			reg = <2>;
-			next-level-cache = <&L2_2>;
-			L2_2: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-		cpu3: PowerPC,e500mc@3 {
-			device_type = "cpu";
-			reg = <3>;
-			next-level-cache = <&L2_3>;
-			L2_3: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-		cpu4: PowerPC,e500mc@4 {
-			device_type = "cpu";
-			reg = <4>;
-			next-level-cache = <&L2_4>;
-			L2_4: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-		cpu5: PowerPC,e500mc@5 {
-			device_type = "cpu";
-			reg = <5>;
-			next-level-cache = <&L2_5>;
-			L2_5: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-		cpu6: PowerPC,e500mc@6 {
-			device_type = "cpu";
-			reg = <6>;
-			next-level-cache = <&L2_6>;
-			L2_6: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-		cpu7: PowerPC,e500mc@7 {
-			device_type = "cpu";
-			reg = <7>;
-			next-level-cache = <&L2_7>;
-			L2_7: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-	};
-
-	dcsr: dcsr@f00000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,dcsr", "simple-bus";
-
-		dcsr-epu@0 {
-			compatible = "fsl,dcsr-epu";
-			interrupts = <52 2 0 0
-				      84 2 0 0
-				      85 2 0 0>;
-			interrupt-parent = <&mpic>;
-			reg = <0x0 0x1000>;
-		};
-		dcsr-npc {
-			compatible = "fsl,dcsr-npc";
-			reg = <0x1000 0x1000 0x1000000 0x8000>;
-		};
-		dcsr-nxc@2000 {
-			compatible = "fsl,dcsr-nxc";
-			reg = <0x2000 0x1000>;
-		};
-		dcsr-corenet {
-			compatible = "fsl,dcsr-corenet";
-			reg = <0x8000 0x1000 0xB0000 0x1000>;
-		};
-		dcsr-dpaa@9000 {
-			compatible = "fsl,p4080-dcsr-dpaa", "fsl,dcsr-dpaa";
-			reg = <0x9000 0x1000>;
-		};
-		dcsr-ocn@11000 {
-			compatible = "fsl,p4080-dcsr-ocn", "fsl,dcsr-ocn";
-			reg = <0x11000 0x1000>;
-		};
-		dcsr-ddr@12000 {
-			compatible = "fsl,dcsr-ddr";
-			dev-handle = <&ddr1>;
-			reg = <0x12000 0x1000>;
-		};
-		dcsr-ddr@13000 {
-			compatible = "fsl,dcsr-ddr";
-			dev-handle = <&ddr2>;
-			reg = <0x13000 0x1000>;
-		};
-		dcsr-nal@18000 {
-			compatible = "fsl,p4080-dcsr-nal", "fsl,dcsr-nal";
-			reg = <0x18000 0x1000>;
-		};
-		dcsr-rcpm@22000 {
-			compatible = "fsl,p4080-dcsr-rcpm", "fsl,dcsr-rcpm";
-			reg = <0x22000 0x1000>;
-		};
-		dcsr-cpu-sb-proxy@40000 {
-			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-			cpu-handle = <&cpu0>;
-			reg = <0x40000 0x1000>;
-		};
-		dcsr-cpu-sb-proxy@41000 {
-			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-			cpu-handle = <&cpu1>;
-			reg = <0x41000 0x1000>;
-		};
-		dcsr-cpu-sb-proxy@42000 {
-			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-			cpu-handle = <&cpu2>;
-			reg = <0x42000 0x1000>;
-		};
-		dcsr-cpu-sb-proxy@43000 {
-			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-			cpu-handle = <&cpu3>;
-			reg = <0x43000 0x1000>;
-		};
-		dcsr-cpu-sb-proxy@44000 {
-			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-			cpu-handle = <&cpu4>;
-			reg = <0x44000 0x1000>;
-		};
-		dcsr-cpu-sb-proxy@45000 {
-			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-			cpu-handle = <&cpu5>;
-			reg = <0x45000 0x1000>;
-		};
-		dcsr-cpu-sb-proxy@46000 {
-			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-			cpu-handle = <&cpu6>;
-			reg = <0x46000 0x1000>;
-		};
-		dcsr-cpu-sb-proxy@47000 {
-			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-			cpu-handle = <&cpu7>;
-			reg = <0x47000 0x1000>;
-		};
-	};
-
-	soc: soc@ffe000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
-		reg = <0xf 0xfe000000 0 0x00001000>;
-
-		soc-sram-error {
-			compatible = "fsl,soc-sram-error";
-			interrupts = <16 2 1 29>;
-		};
-
-		corenet-law@0 {
-			compatible = "fsl,corenet-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <32>;
-		};
-
-		ddr1: memory-controller@8000 {
-			compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
-			reg = <0x8000 0x1000>;
-			interrupts = <16 2 1 23>;
-		};
-
-		ddr2: memory-controller@9000 {
-			compatible = "fsl,qoriq-memory-controller-v4.4","fsl,qoriq-memory-controller";
-			reg = <0x9000 0x1000>;
-			interrupts = <16 2 1 22>;
-		};
-
-		cpc: l3-cache-controller@10000 {
-			compatible = "fsl,p4080-l3-cache-controller", "cache";
-			reg = <0x10000 0x1000
-			       0x11000 0x1000>;
-			interrupts = <16 2 1 27
-				      16 2 1 26>;
-		};
-
-		corenet-cf@18000 {
-			compatible = "fsl,corenet-cf";
-			reg = <0x18000 0x1000>;
-			interrupts = <16 2 1 31>;
-			fsl,ccf-num-csdids = <32>;
-			fsl,ccf-num-snoopids = <32>;
-		};
-
-		iommu@20000 {
-			compatible = "fsl,pamu-v1.0", "fsl,pamu";
-			reg = <0x20000 0x5000>;
-			interrupts = <
-				24 2 0 0
-				16 2 1 30>;
-		};
-
-		mpic: pic@40000 {
-			clock-frequency = <0>;
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <4>;
-			reg = <0x40000 0x40000>;
-			compatible = "fsl,mpic", "chrp,open-pic";
-			device_type = "open-pic";
-		};
-
-		msi0: msi@41600 {
-			compatible = "fsl,mpic-msi";
-			reg = <0x41600 0x200>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe0 0 0 0
-				0xe1 0 0 0
-				0xe2 0 0 0
-				0xe3 0 0 0
-				0xe4 0 0 0
-				0xe5 0 0 0
-				0xe6 0 0 0
-				0xe7 0 0 0>;
-		};
-
-		msi1: msi@41800 {
-			compatible = "fsl,mpic-msi";
-			reg = <0x41800 0x200>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe8 0 0 0
-				0xe9 0 0 0
-				0xea 0 0 0
-				0xeb 0 0 0
-				0xec 0 0 0
-				0xed 0 0 0
-				0xee 0 0 0
-				0xef 0 0 0>;
-		};
-
-		msi2: msi@41a00 {
-			compatible = "fsl,mpic-msi";
-			reg = <0x41a00 0x200>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xf0 0 0 0
-				0xf1 0 0 0
-				0xf2 0 0 0
-				0xf3 0 0 0
-				0xf4 0 0 0
-				0xf5 0 0 0
-				0xf6 0 0 0
-				0xf7 0 0 0>;
-		};
-
-		guts: global-utilities@e0000 {
-			compatible = "fsl,qoriq-device-config-1.0";
-			reg = <0xe0000 0xe00>;
-			fsl,has-rstcr;
-			#sleep-cells = <1>;
-			fsl,liodn-bits = <12>;
-		};
-
-		pins: global-utilities@e0e00 {
-			compatible = "fsl,qoriq-pin-control-1.0";
-			reg = <0xe0e00 0x200>;
-			#sleep-cells = <2>;
-		};
-
-		clockgen: global-utilities@e1000 {
-			compatible = "fsl,p4080-clockgen", "fsl,qoriq-clockgen-1.0";
-			reg = <0xe1000 0x1000>;
-			clock-frequency = <0>;
-		};
-
-		rcpm: global-utilities@e2000 {
-			compatible = "fsl,qoriq-rcpm-1.0";
-			reg = <0xe2000 0x1000>;
-			#sleep-cells = <1>;
-		};
-
-		sfp: sfp@e8000 {
-			compatible = "fsl,p4080-sfp", "fsl,qoriq-sfp-1.0";
-			reg	   = <0xe8000 0x1000>;
-		};
-
-		serdes: serdes@ea000 {
-			compatible = "fsl,p4080-serdes";
-			reg	   = <0xea000 0x1000>;
-		};
-
-		dma0: dma@100300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,p4080-dma", "fsl,eloplus-dma";
-			reg = <0x100300 0x4>;
-			ranges = <0x0 0x100100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,p4080-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupts = <28 2 0 0>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,p4080-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupts = <29 2 0 0>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,p4080-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupts = <30 2 0 0>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,p4080-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupts = <31 2 0 0>;
-			};
-		};
-
-		dma1: dma@101300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,p4080-dma", "fsl,eloplus-dma";
-			reg = <0x101300 0x4>;
-			ranges = <0x0 0x101100 0x200>;
-			cell-index = <1>;
-			dma-channel@0 {
-				compatible = "fsl,p4080-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupts = <32 2 0 0>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,p4080-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupts = <33 2 0 0>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,p4080-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupts = <34 2 0 0>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,p4080-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupts = <35 2 0 0>;
-			};
-		};
-
-		spi@110000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,p4080-espi", "fsl,mpc8536-espi";
-			reg = <0x110000 0x1000>;
-			interrupts = <53 0x2 0 0>;
-			fsl,espi-num-chipselects = <4>;
-		};
-
-		sdhc: sdhc@114000 {
-			compatible = "fsl,p4080-esdhc", "fsl,esdhc";
-			reg = <0x114000 0x1000>;
-			interrupts = <48 2 0 0>;
-			voltage-ranges = <3300 3300>;
-			sdhci,auto-cmd12;
-			clock-frequency = <0>;
-		};
-
-		i2c@118000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x118000 0x100>;
-			interrupts = <38 2 0 0>;
-			dfsrr;
-		};
-
-		i2c@118100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x118100 0x100>;
-			interrupts = <38 2 0 0>;
-			dfsrr;
-		};
-
-		i2c@119000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <2>;
-			compatible = "fsl-i2c";
-			reg = <0x119000 0x100>;
-			interrupts = <39 2 0 0>;
-			dfsrr;
-		};
-
-		i2c@119100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <3>;
-			compatible = "fsl-i2c";
-			reg = <0x119100 0x100>;
-			interrupts = <39 2 0 0>;
-			dfsrr;
-		};
-
-		serial0: serial@11c500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x11c500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <36 2 0 0>;
-		};
-
-		serial1: serial@11c600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x11c600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <36 2 0 0>;
-		};
-
-		serial2: serial@11d500 {
-			cell-index = <2>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x11d500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <37 2 0 0>;
-		};
-
-		serial3: serial@11d600 {
-			cell-index = <3>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x11d600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <37 2 0 0>;
-		};
-
-		gpio0: gpio@130000 {
-			compatible = "fsl,p4080-gpio", "fsl,qoriq-gpio";
-			reg = <0x130000 0x1000>;
-			interrupts = <55 2 0 0>;
-			#gpio-cells = <2>;
-			gpio-controller;
-		};
-
-		usb0: usb@210000 {
-			compatible = "fsl,p4080-usb2-mph",
-					"fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
-			reg = <0x210000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <44 0x2 0 0>;
-		};
-
-		usb1: usb@211000 {
-			compatible = "fsl,p4080-usb2-dr",
-					"fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
-			reg = <0x211000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <45 0x2 0 0>;
-		};
-
-		crypto: crypto@300000 {
-			compatible = "fsl,sec-v4.0";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x300000 0x10000>;
-			ranges = <0 0x300000 0x10000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <92 2 0 0>;
-
-			sec_jr0: jr@1000 {
-				compatible = "fsl,sec-v4.0-job-ring";
-				reg = <0x1000 0x1000>;
-				interrupt-parent = <&mpic>;
-				interrupts = <88 2 0 0>;
-			};
-
-			sec_jr1: jr@2000 {
-				compatible = "fsl,sec-v4.0-job-ring";
-				reg = <0x2000 0x1000>;
-				interrupt-parent = <&mpic>;
-				interrupts = <89 2 0 0>;
-			};
-
-			sec_jr2: jr@3000 {
-				compatible = "fsl,sec-v4.0-job-ring";
-				reg = <0x3000 0x1000>;
-				interrupt-parent = <&mpic>;
-				interrupts = <90 2 0 0>;
-			};
-
-			sec_jr3: jr@4000 {
-				compatible = "fsl,sec-v4.0-job-ring";
-				reg = <0x4000 0x1000>;
-				interrupt-parent = <&mpic>;
-				interrupts = <91 2 0 0>;
-			};
-
-			rtic@6000 {
-				compatible = "fsl,sec-v4.0-rtic";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x6000 0x100>;
-				ranges = <0x0 0x6100 0xe00>;
-
-				rtic_a: rtic-a@0 {
-					compatible = "fsl,sec-v4.0-rtic-memory";
-					reg = <0x00 0x20 0x100 0x80>;
-				};
-
-				rtic_b: rtic-b@20 {
-					compatible = "fsl,sec-v4.0-rtic-memory";
-					reg = <0x20 0x20 0x200 0x80>;
-				};
-
-				rtic_c: rtic-c@40 {
-					compatible = "fsl,sec-v4.0-rtic-memory";
-					reg = <0x40 0x20 0x300 0x80>;
-				};
-
-				rtic_d: rtic-d@60 {
-					compatible = "fsl,sec-v4.0-rtic-memory";
-					reg = <0x60 0x20 0x500 0x80>;
-				};
-			};
-		};
-
-		sec_mon: sec_mon@314000 {
-			compatible = "fsl,sec-v4.0-mon";
-			reg = <0x314000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <93 2 0 0>;
-		};
-	};
-
-	rapidio0: rapidio@ffe0c0000 {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		compatible = "fsl,rapidio-delta";
-		interrupts = <
-			16 2 1 11 /* err_irq */
-			56 2 0 0  /* bell_outb_irq */
-			57 2 0 0  /* bell_inb_irq */
-			60 2 0 0  /* msg1_tx_irq */
-			61 2 0 0  /* msg1_rx_irq */
-			62 2 0 0  /* msg2_tx_irq */
-			63 2 0 0>; /* msg2_rx_irq */
-	};
-
-	localbus@ffe124000 {
-		compatible = "fsl,p4080-elbc", "fsl,elbc", "simple-bus";
-		interrupts = <25 2 0 0>;
-		#address-cells = <2>;
-		#size-cells = <1>;
-	};
-
-	pci0: pcie@ffe200000 {
-		compatible = "fsl,p4080-pcie";
-		device_type = "pci";
-		#size-cells = <2>;
-		#address-cells = <3>;
-		bus-range = <0x0 0xff>;
-		clock-frequency = <0x1fca055>;
-		fsl,msi = <&msi0>;
-		interrupts = <16 2 1 15>;
-		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			interrupts = <16 2 1 15>;
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map = <
-				/* IDSEL 0x0 */
-				0000 0 0 1 &mpic 40 1 0 0
-				0000 0 0 2 &mpic 1 1 0 0
-				0000 0 0 3 &mpic 2 1 0 0
-				0000 0 0 4 &mpic 3 1 0 0
-				>;
-		};
-	};
-
-	pci1: pcie@ffe201000 {
-		compatible = "fsl,p4080-pcie";
-		device_type = "pci";
-		#size-cells = <2>;
-		#address-cells = <3>;
-		bus-range = <0 0xff>;
-		clock-frequency = <0x1fca055>;
-		fsl,msi = <&msi1>;
-		interrupts = <16 2 1 14>;
-		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			interrupts = <16 2 1 14>;
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map = <
-				/* IDSEL 0x0 */
-				0000 0 0 1 &mpic 41 1 0 0
-				0000 0 0 2 &mpic 5 1 0 0
-				0000 0 0 3 &mpic 6 1 0 0
-				0000 0 0 4 &mpic 7 1 0 0
-				>;
-		};
-	};
-
-	pci2: pcie@ffe202000 {
-		compatible = "fsl,p4080-pcie";
-		device_type = "pci";
-		#size-cells = <2>;
-		#address-cells = <3>;
-		bus-range = <0x0 0xff>;
-		clock-frequency = <0x1fca055>;
-		fsl,msi = <&msi2>;
-		interrupts = <16 2 1 13>;
-		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			interrupts = <16 2 1 13>;
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map = <
-				/* IDSEL 0x0 */
-				0000 0 0 1 &mpic 42 1 0 0
-				0000 0 0 2 &mpic 9 1 0 0
-				0000 0 0 3 &mpic 10 1 0 0
-				0000 0 0 4 &mpic 11 1 0 0
-				>;
-		};
-	};
-};
diff --git a/arch/powerpc/boot/dts/p5020ds.dts b/arch/powerpc/boot/dts/p5020ds.dts
index e6d4099..1c25068 100644
--- a/arch/powerpc/boot/dts/p5020ds.dts
+++ b/arch/powerpc/boot/dts/p5020ds.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "p5020si.dtsi"
+/include/ "fsl/p5020si-pre.dtsi"
 
 / {
 	model = "fsl,P5020DS";
@@ -50,6 +50,8 @@
 	};
 
 	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
 		spi@110000 {
 			flash@0 {
 				#address-cells = <1>;
@@ -99,7 +101,18 @@
 		};
 	};
 
-	localbus@ffe124000 {
+	rio: rapidio@ffe0c0000 {
+		reg = <0xf 0xfe0c0000 0 0x11000>;
+
+		port1 {
+			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+		};
+		port2 {
+			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+		};
+	};
+
+	lbc: localbus@ffe124000 {
 		reg = <0xf 0xfe124000 0 0x1000>;
 		ranges = <0 0 0xf 0xe8000000 0x08000000
 			  2 0 0xf 0xffa00000 0x00040000
@@ -160,7 +173,7 @@
 		reg = <0xf 0xfe200000 0 0x1000>;
 		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
 			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
-
+		fsl,msi = <&msi0>;
 		pcie@0 {
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000
@@ -176,6 +189,7 @@
 		reg = <0xf 0xfe201000 0 0x1000>;
 		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
 			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+		fsl,msi = <&msi1>;
 		pcie@0 {
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000
@@ -191,6 +205,7 @@
 		reg = <0xf 0xfe202000 0 0x1000>;
 		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
 			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		fsl,msi = <&msi2>;
 		pcie@0 {
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000
@@ -206,6 +221,7 @@
 		reg = <0xf 0xfe203000 0 0x1000>;
 		ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
 			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+		fsl,msi = <&msi2>;
 		pcie@0 {
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000
@@ -217,3 +233,5 @@
 		};
 	};
 };
+
+/include/ "fsl/p5020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p5020si.dtsi b/arch/powerpc/boot/dts/p5020si.dtsi
deleted file mode 100644
index e7948ad..0000000
--- a/arch/powerpc/boot/dts/p5020si.dtsi
+++ /dev/null
@@ -1,716 +0,0 @@
-/*
- * P5020 Silicon Device Tree Source
- *
- * Copyright 2010-2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/ {
-	compatible = "fsl,P5020";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	aliases {
-		ccsr = &soc;
-		dcsr = &dcsr;
-
-		serial0 = &serial0;
-		serial1 = &serial1;
-		serial2 = &serial2;
-		serial3 = &serial3;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		pci2 = &pci2;
-		pci3 = &pci3;
-		usb0 = &usb0;
-		usb1 = &usb1;
-		dma0 = &dma0;
-		dma1 = &dma1;
-		sdhc = &sdhc;
-		msi0 = &msi0;
-		msi1 = &msi1;
-		msi2 = &msi2;
-
-		crypto = &crypto;
-		sec_jr0 = &sec_jr0;
-		sec_jr1 = &sec_jr1;
-		sec_jr2 = &sec_jr2;
-		sec_jr3 = &sec_jr3;
-		rtic_a = &rtic_a;
-		rtic_b = &rtic_b;
-		rtic_c = &rtic_c;
-		rtic_d = &rtic_d;
-		sec_mon = &sec_mon;
-
-/*
-		rio0 = &rapidio0;
- */
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: PowerPC,e5500@0 {
-			device_type = "cpu";
-			reg = <0>;
-			next-level-cache = <&L2_0>;
-			L2_0: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-		cpu1: PowerPC,e5500@1 {
-			device_type = "cpu";
-			reg = <1>;
-			next-level-cache = <&L2_1>;
-			L2_1: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-	};
-
-	dcsr: dcsr@f00000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,dcsr", "simple-bus";
-
-		dcsr-epu@0 {
-			compatible = "fsl,dcsr-epu";
-			interrupts = <52 2 0 0
-				      84 2 0 0
-				      85 2 0 0>;
-			interrupt-parent = <&mpic>;
-			reg = <0x0 0x1000>;
-		};
-		dcsr-npc {
-			compatible = "fsl,dcsr-npc";
-			reg = <0x1000 0x1000 0x1000000 0x8000>;
-		};
-		dcsr-nxc@2000 {
-			compatible = "fsl,dcsr-nxc";
-			reg = <0x2000 0x1000>;
-		};
-		dcsr-corenet {
-			compatible = "fsl,dcsr-corenet";
-			reg = <0x8000 0x1000 0xB0000 0x1000>;
-		};
-		dcsr-dpaa@9000 {
-			compatible = "fsl,p5020-dcsr-dpaa", "fsl,dcsr-dpaa";
-			reg = <0x9000 0x1000>;
-		};
-		dcsr-ocn@11000 {
-			compatible = "fsl,p5020-dcsr-ocn", "fsl,dcsr-ocn";
-			reg = <0x11000 0x1000>;
-		};
-		dcsr-ddr@12000 {
-			compatible = "fsl,dcsr-ddr";
-			dev-handle = <&ddr1>;
-			reg = <0x12000 0x1000>;
-		};
-		dcsr-ddr@13000 {
-			compatible = "fsl,dcsr-ddr";
-			dev-handle = <&ddr2>;
-			reg = <0x13000 0x1000>;
-		};
-		dcsr-nal@18000 {
-			compatible = "fsl,p5020-dcsr-nal", "fsl,dcsr-nal";
-			reg = <0x18000 0x1000>;
-		};
-		dcsr-rcpm@22000 {
-			compatible = "fsl,p5020-dcsr-rcpm", "fsl,dcsr-rcpm";
-			reg = <0x22000 0x1000>;
-		};
-		dcsr-cpu-sb-proxy@40000 {
-			compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-			cpu-handle = <&cpu0>;
-			reg = <0x40000 0x1000>;
-		};
-		dcsr-cpu-sb-proxy@41000 {
-			compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-			cpu-handle = <&cpu1>;
-			reg = <0x41000 0x1000>;
-		};
-	};
-
-	soc: soc@ffe000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
-		reg = <0xf 0xfe000000 0 0x00001000>;
-
-		soc-sram-error {
-			compatible = "fsl,soc-sram-error";
-			interrupts = <16 2 1 29>;
-		};
-
-		corenet-law@0 {
-			compatible = "fsl,corenet-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <32>;
-		};
-
-		ddr1: memory-controller@8000 {
-			compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
-			reg = <0x8000 0x1000>;
-			interrupts = <16 2 1 23>;
-		};
-
-		ddr2: memory-controller@9000 {
-			compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
-			reg = <0x9000 0x1000>;
-			interrupts = <16 2 1 22>;
-		};
-
-		cpc: l3-cache-controller@10000 {
-			compatible = "fsl,p5020-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
-			reg = <0x10000 0x1000
-			       0x11000 0x1000>;
-			interrupts = <16 2 1 27
-				      16 2 1 26>;
-		};
-
-		corenet-cf@18000 {
-			compatible = "fsl,corenet-cf";
-			reg = <0x18000 0x1000>;
-			interrupts = <16 2 1 31>;
-			fsl,ccf-num-csdids = <32>;
-			fsl,ccf-num-snoopids = <32>;
-		};
-
-		iommu@20000 {
-			compatible = "fsl,pamu-v1.0", "fsl,pamu";
-			reg = <0x20000 0x4000>;
-			interrupts = <
-				24 2 0 0
-				16 2 1 30>;
-		};
-
-		mpic: pic@40000 {
-			clock-frequency = <0>;
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <4>;
-			reg = <0x40000 0x40000>;
-			compatible = "fsl,mpic", "chrp,open-pic";
-			device_type = "open-pic";
-		};
-
-		msi0: msi@41600 {
-			compatible = "fsl,mpic-msi";
-			reg = <0x41600 0x200>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe0 0 0 0
-				0xe1 0 0 0
-				0xe2 0 0 0
-				0xe3 0 0 0
-				0xe4 0 0 0
-				0xe5 0 0 0
-				0xe6 0 0 0
-				0xe7 0 0 0>;
-		};
-
-		msi1: msi@41800 {
-			compatible = "fsl,mpic-msi";
-			reg = <0x41800 0x200>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe8 0 0 0
-				0xe9 0 0 0
-				0xea 0 0 0
-				0xeb 0 0 0
-				0xec 0 0 0
-				0xed 0 0 0
-				0xee 0 0 0
-				0xef 0 0 0>;
-		};
-
-		msi2: msi@41a00 {
-			compatible = "fsl,mpic-msi";
-			reg = <0x41a00 0x200>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xf0 0 0 0
-				0xf1 0 0 0
-				0xf2 0 0 0
-				0xf3 0 0 0
-				0xf4 0 0 0
-				0xf5 0 0 0
-				0xf6 0 0 0
-				0xf7 0 0 0>;
-		};
-
-		guts: global-utilities@e0000 {
-			compatible = "fsl,qoriq-device-config-1.0";
-			reg = <0xe0000 0xe00>;
-			fsl,has-rstcr;
-			#sleep-cells = <1>;
-			fsl,liodn-bits = <12>;
-		};
-
-		pins: global-utilities@e0e00 {
-			compatible = "fsl,qoriq-pin-control-1.0";
-			reg = <0xe0e00 0x200>;
-			#sleep-cells = <2>;
-		};
-
-		clockgen: global-utilities@e1000 {
-			compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
-			reg = <0xe1000 0x1000>;
-			clock-frequency = <0>;
-		};
-
-		rcpm: global-utilities@e2000 {
-			compatible = "fsl,qoriq-rcpm-1.0";
-			reg = <0xe2000 0x1000>;
-			#sleep-cells = <1>;
-		};
-
-		sfp: sfp@e8000 {
-			compatible = "fsl,p5020-sfp", "fsl,qoriq-sfp-1.0";
-			reg	   = <0xe8000 0x1000>;
-		};
-
-		serdes: serdes@ea000 {
-			compatible = "fsl,p5020-serdes";
-			reg	   = <0xea000 0x1000>;
-		};
-
-		dma0: dma@100300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,p5020-dma", "fsl,eloplus-dma";
-			reg = <0x100300 0x4>;
-			ranges = <0x0 0x100100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,p5020-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupts = <28 2 0 0>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,p5020-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupts = <29 2 0 0>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,p5020-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupts = <30 2 0 0>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,p5020-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupts = <31 2 0 0>;
-			};
-		};
-
-		dma1: dma@101300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,p5020-dma", "fsl,eloplus-dma";
-			reg = <0x101300 0x4>;
-			ranges = <0x0 0x101100 0x200>;
-			cell-index = <1>;
-			dma-channel@0 {
-				compatible = "fsl,p5020-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupts = <32 2 0 0>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,p5020-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupts = <33 2 0 0>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,p5020-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupts = <34 2 0 0>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,p5020-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupts = <35 2 0 0>;
-			};
-		};
-
-		spi@110000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,p5020-espi", "fsl,mpc8536-espi";
-			reg = <0x110000 0x1000>;
-			interrupts = <53 0x2 0 0>;
-			fsl,espi-num-chipselects = <4>;
-		};
-
-		sdhc: sdhc@114000 {
-			compatible = "fsl,p5020-esdhc", "fsl,esdhc";
-			reg = <0x114000 0x1000>;
-			interrupts = <48 2 0 0>;
-			sdhci,auto-cmd12;
-			clock-frequency = <0>;
-		};
-
-		i2c@118000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x118000 0x100>;
-			interrupts = <38 2 0 0>;
-			dfsrr;
-		};
-
-		i2c@118100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x118100 0x100>;
-			interrupts = <38 2 0 0>;
-			dfsrr;
-		};
-
-		i2c@119000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <2>;
-			compatible = "fsl-i2c";
-			reg = <0x119000 0x100>;
-			interrupts = <39 2 0 0>;
-			dfsrr;
-		};
-
-		i2c@119100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <3>;
-			compatible = "fsl-i2c";
-			reg = <0x119100 0x100>;
-			interrupts = <39 2 0 0>;
-			dfsrr;
-		};
-
-		serial0: serial@11c500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x11c500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <36 2 0 0>;
-		};
-
-		serial1: serial@11c600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x11c600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <36 2 0 0>;
-		};
-
-		serial2: serial@11d500 {
-			cell-index = <2>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x11d500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <37 2 0 0>;
-		};
-
-		serial3: serial@11d600 {
-			cell-index = <3>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x11d600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <37 2 0 0>;
-		};
-
-		gpio0: gpio@130000 {
-			compatible = "fsl,p5020-gpio", "fsl,qoriq-gpio";
-			reg = <0x130000 0x1000>;
-			interrupts = <55 2 0 0>;
-			#gpio-cells = <2>;
-			gpio-controller;
-		};
-
-		usb0: usb@210000 {
-			compatible = "fsl,p5020-usb2-mph",
-					"fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
-			reg = <0x210000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <44 0x2 0 0>;
-			phy_type = "utmi";
-			port0;
-		};
-
-		usb1: usb@211000 {
-			compatible = "fsl,p5020-usb2-dr",
-					"fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
-			reg = <0x211000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <45 0x2 0 0>;
-			dr_mode = "host";
-			phy_type = "utmi";
-		};
-
-		sata@220000 {
-			compatible = "fsl,p5020-sata", "fsl,pq-sata-v2";
-			reg = <0x220000 0x1000>;
-			interrupts = <68 0x2 0 0>;
-		};
-
-		sata@221000 {
-			compatible = "fsl,p5020-sata", "fsl,pq-sata-v2";
-			reg = <0x221000 0x1000>;
-			interrupts = <69 0x2 0 0>;
-		};
-
-		crypto: crypto@300000 {
-			compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg		 = <0x300000 0x10000>;
-			ranges		 = <0 0x300000 0x10000>;
-			interrupts	 = <92 2 0 0>;
-
-			sec_jr0: jr@1000 {
-				compatible = "fsl,sec-v4.2-job-ring",
-					     "fsl,sec-v4.0-job-ring";
-				reg = <0x1000 0x1000>;
-				interrupts = <88 2 0 0>;
-			};
-
-			sec_jr1: jr@2000 {
-				compatible = "fsl,sec-v4.2-job-ring",
-					     "fsl,sec-v4.0-job-ring";
-				reg = <0x2000 0x1000>;
-				interrupts = <89 2 0 0>;
-			};
-
-			sec_jr2: jr@3000 {
-				compatible = "fsl,sec-v4.2-job-ring",
-					     "fsl,sec-v4.0-job-ring";
-				reg = <0x3000 0x1000>;
-				interrupts = <90 2 0 0>;
-			};
-
-			sec_jr3: jr@4000 {
-				compatible = "fsl,sec-v4.2-job-ring",
-					     "fsl,sec-v4.0-job-ring";
-				reg = <0x4000 0x1000>;
-				interrupts = <91 2 0 0>;
-			};
-
-			rtic@6000 {
-				compatible = "fsl,sec-v4.2-rtic",
-					     "fsl,sec-v4.0-rtic";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x6000 0x100>;
-				ranges = <0x0 0x6100 0xe00>;
-
-				rtic_a: rtic-a@0 {
-					compatible = "fsl,sec-v4.2-rtic-memory",
-						     "fsl,sec-v4.0-rtic-memory";
-					reg = <0x00 0x20 0x100 0x80>;
-				};
-
-				rtic_b: rtic-b@20 {
-					compatible = "fsl,sec-v4.2-rtic-memory",
-						     "fsl,sec-v4.0-rtic-memory";
-					reg = <0x20 0x20 0x200 0x80>;
-				};
-
-				rtic_c: rtic-c@40 {
-					compatible = "fsl,sec-v4.2-rtic-memory",
-						     "fsl,sec-v4.0-rtic-memory";
-					reg = <0x40 0x20 0x300 0x80>;
-				};
-
-				rtic_d: rtic-d@60 {
-					compatible = "fsl,sec-v4.2-rtic-memory",
-						     "fsl,sec-v4.0-rtic-memory";
-					reg = <0x60 0x20 0x500 0x80>;
-				};
-			};
-		};
-
-		sec_mon: sec_mon@314000 {
-			compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon";
-			reg = <0x314000 0x1000>;
-			interrupts = <93 2 0 0>;
-		};
-	};
-
-/*
-	rapidio0: rapidio@ffe0c0000
-*/
-
-	localbus@ffe124000 {
-		compatible = "fsl,p5020-elbc", "fsl,elbc", "simple-bus";
-		interrupts = <25 2 0 0>;
-		#address-cells = <2>;
-		#size-cells = <1>;
-	};
-
-	pci0: pcie@ffe200000 {
-		compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
-		device_type = "pci";
-		#size-cells = <2>;
-		#address-cells = <3>;
-		bus-range = <0x0 0xff>;
-		clock-frequency = <0x1fca055>;
-		fsl,msi = <&msi0>;
-		interrupts = <16 2 1 15>;
-
-		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			interrupts = <16 2 1 15>;
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map = <
-				/* IDSEL 0x0 */
-				0000 0 0 1 &mpic 40 1 0 0
-				0000 0 0 2 &mpic 1 1 0 0
-				0000 0 0 3 &mpic 2 1 0 0
-				0000 0 0 4 &mpic 3 1 0 0
-				>;
-		};
-	};
-
-	pci1: pcie@ffe201000 {
-		compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
-		device_type = "pci";
-		#size-cells = <2>;
-		#address-cells = <3>;
-		bus-range = <0 0xff>;
-		clock-frequency = <0x1fca055>;
-		fsl,msi = <&msi1>;
-		interrupts = <16 2 1 14>;
-		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			interrupts = <16 2 1 14>;
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map = <
-				/* IDSEL 0x0 */
-				0000 0 0 1 &mpic 41 1 0 0
-				0000 0 0 2 &mpic 5 1 0 0
-				0000 0 0 3 &mpic 6 1 0 0
-				0000 0 0 4 &mpic 7 1 0 0
-				>;
-		};
-	};
-
-	pci2: pcie@ffe202000 {
-		compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
-		device_type = "pci";
-		#size-cells = <2>;
-		#address-cells = <3>;
-		bus-range = <0x0 0xff>;
-		clock-frequency = <0x1fca055>;
-		fsl,msi = <&msi2>;
-		interrupts = <16 2 1 13>;
-		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			interrupts = <16 2 1 13>;
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map = <
-				/* IDSEL 0x0 */
-				0000 0 0 1 &mpic 42 1 0 0
-				0000 0 0 2 &mpic 9 1 0 0
-				0000 0 0 3 &mpic 10 1 0 0
-				0000 0 0 4 &mpic 11 1 0 0
-				>;
-		};
-	};
-
-	pci3: pcie@ffe203000 {
-		compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
-		device_type = "pci";
-		#size-cells = <2>;
-		#address-cells = <3>;
-		bus-range = <0x0 0xff>;
-		clock-frequency = <0x1fca055>;
-		fsl,msi = <&msi2>;
-		interrupts = <16 2 1 12>;
-		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			interrupts = <16 2 1 12>;
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map = <
-				/* IDSEL 0x0 */
-				0000 0 0 1 &mpic 43 1 0 0
-				0000 0 0 2 &mpic 0 1 0 0
-				0000 0 0 3 &mpic 4 1 0 0
-				0000 0 0 4 &mpic 8 1 0 0
-				>;
-		};
-	};
-};
diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts
index 0dc90f9..b1e45a8 100644
--- a/arch/powerpc/boot/dts/sbc8349.dts
+++ b/arch/powerpc/boot/dts/sbc8349.dts
@@ -222,7 +222,7 @@
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x100>;
 			clock-frequency = <0>;
 			interrupts = <9 0x8>;
@@ -232,7 +232,7 @@
 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4600 0x100>;
 			clock-frequency = <0>;
 			interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts
index 94a3322..77be771 100644
--- a/arch/powerpc/boot/dts/sbc8548.dts
+++ b/arch/powerpc/boot/dts/sbc8548.dts
@@ -316,7 +316,7 @@
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x100>;	// reg base, size
 			clock-frequency = <0>;	// should we fill in in uboot?
 			interrupts = <0x2a 0x2>;
@@ -326,7 +326,7 @@
 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4600 0x100>;	// reg base, size
 			clock-frequency = <0>;	// should we fill in in uboot?
 			interrupts = <0x2a 0x2>;
diff --git a/arch/powerpc/boot/dts/sbc8641d.dts b/arch/powerpc/boot/dts/sbc8641d.dts
index ee5538f..56bebce 100644
--- a/arch/powerpc/boot/dts/sbc8641d.dts
+++ b/arch/powerpc/boot/dts/sbc8641d.dts
@@ -347,7 +347,7 @@
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x100>;
 			clock-frequency = <0>;
 			interrupts = <42 2>;
@@ -357,7 +357,7 @@
 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4600 0x100>;
 			clock-frequency = <0>;
 			interrupts = <28 2>;
diff --git a/arch/powerpc/boot/dts/socrates.dts b/arch/powerpc/boot/dts/socrates.dts
index 38c3540..134a5ff9 100644
--- a/arch/powerpc/boot/dts/socrates.dts
+++ b/arch/powerpc/boot/dts/socrates.dts
@@ -199,7 +199,7 @@
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x100>;
 			clock-frequency = <0>;
 			interrupts = <42 2>;
@@ -209,7 +209,7 @@
 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4600 0x100>;
 			clock-frequency = <0>;
 			interrupts = <42 2>;
diff --git a/arch/powerpc/boot/dts/storcenter.dts b/arch/powerpc/boot/dts/storcenter.dts
index eab680c..2a55573 100644
--- a/arch/powerpc/boot/dts/storcenter.dts
+++ b/arch/powerpc/boot/dts/storcenter.dts
@@ -74,7 +74,7 @@
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x20>;
 			clock-frequency = <97553800>; /* Hz */
 			current-speed = <115200>;
@@ -85,7 +85,7 @@
 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4600 0x20>;
 			clock-frequency = <97553800>; /* Hz */
 			current-speed = <9600>;
diff --git a/arch/powerpc/boot/dts/stxssa8555.dts b/arch/powerpc/boot/dts/stxssa8555.dts
index 49efd44..4f166b0 100644
--- a/arch/powerpc/boot/dts/stxssa8555.dts
+++ b/arch/powerpc/boot/dts/stxssa8555.dts
@@ -210,7 +210,7 @@
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x100>; 	// reg base, size
 			clock-frequency = <0>; 	// should we fill in in uboot?
 			interrupts = <42 2>;
@@ -220,7 +220,7 @@
 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4600 0x100>;	// reg base, size
 			clock-frequency = <0>; 	// should we fill in in uboot?
 			interrupts = <42 2>;
diff --git a/arch/powerpc/boot/dts/tqm8540.dts b/arch/powerpc/boot/dts/tqm8540.dts
index 0a4cedb..ed264d9 100644
--- a/arch/powerpc/boot/dts/tqm8540.dts
+++ b/arch/powerpc/boot/dts/tqm8540.dts
@@ -250,7 +250,7 @@
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x100>; 	// reg base, size
 			clock-frequency = <0>; 	// should we fill in in uboot?
 			interrupts = <42 2>;
@@ -260,7 +260,7 @@
 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4600 0x100>;	// reg base, size
 			clock-frequency = <0>; 	// should we fill in in uboot?
 			interrupts = <42 2>;
diff --git a/arch/powerpc/boot/dts/tqm8541.dts b/arch/powerpc/boot/dts/tqm8541.dts
index f49d091..9252421 100644
--- a/arch/powerpc/boot/dts/tqm8541.dts
+++ b/arch/powerpc/boot/dts/tqm8541.dts
@@ -224,7 +224,7 @@
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x100>; 	// reg base, size
 			clock-frequency = <0>; 	// should we fill in in uboot?
 			interrupts = <42 2>;
@@ -234,7 +234,7 @@
 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4600 0x100>;	// reg base, size
 			clock-frequency = <0>; 	// should we fill in in uboot?
 			interrupts = <42 2>;
diff --git a/arch/powerpc/boot/dts/tqm8548-bigflash.dts b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
index 9452c3c..6e1ac50 100644
--- a/arch/powerpc/boot/dts/tqm8548-bigflash.dts
+++ b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
@@ -305,7 +305,7 @@
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x100>;	// reg base, size
 			clock-frequency = <0>;	// should we fill in in uboot?
 			current-speed = <115200>;
@@ -316,7 +316,7 @@
 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4600 0x100>;	// reg base, size
 			clock-frequency = <0>;	// should we fill in in uboot?
 			current-speed = <115200>;
@@ -352,7 +352,7 @@
 		ranges = <
 			0 0x0 0xfc000000 0x04000000	// NOR FLASH bank 1
 			1 0x0 0xf8000000 0x08000000	// NOR FLASH bank 0
-			2 0x0 0xa3000000 0x00008000	// CAN (2 x i82527)
+			2 0x0 0xa3000000 0x00008000	// CAN (2 x CC770)
 			3 0x0 0xa3010000 0x00008000	// NAND FLASH
 
 		>;
@@ -393,18 +393,27 @@
 		};
 
 		/* Note: CAN support needs be enabled in U-Boot */
-		can0@2,0 {
-			compatible = "intel,82527"; // Bosch CC770
+		can@2,0 {
+			compatible = "bosch,cc770"; // Bosch CC770
 			reg = <2 0x0 0x100>;
 			interrupts = <4 1>;
 			interrupt-parent = <&mpic>;
+			bosch,external-clock-frequency = <16000000>;
+			bosch,disconnect-rx1-input;
+			bosch,disconnect-tx1-output;
+			bosch,iso-low-speed-mux;
+			bosch,clock-out-frequency = <16000000>;
 		};
 
-		can1@2,100 {
-			compatible = "intel,82527"; // Bosch CC770
+		can@2,100 {
+			compatible = "bosch,cc770"; // Bosch CC770
 			reg = <2 0x100 0x100>;
 			interrupts = <4 1>;
 			interrupt-parent = <&mpic>;
+			bosch,external-clock-frequency = <16000000>;
+			bosch,disconnect-rx1-input;
+			bosch,disconnect-tx1-output;
+			bosch,iso-low-speed-mux;
 		};
 
 		/* Note: NAND support needs to be enabled in U-Boot */
diff --git a/arch/powerpc/boot/dts/tqm8548.dts b/arch/powerpc/boot/dts/tqm8548.dts
index 619776f..161e75e 100644
--- a/arch/powerpc/boot/dts/tqm8548.dts
+++ b/arch/powerpc/boot/dts/tqm8548.dts
@@ -305,7 +305,7 @@
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x100>;	// reg base, size
 			clock-frequency = <0>;	// should we fill in in uboot?
 			current-speed = <115200>;
@@ -316,7 +316,7 @@
 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4600 0x100>;	// reg base, size
 			clock-frequency = <0>;	// should we fill in in uboot?
 			current-speed = <115200>;
@@ -352,7 +352,7 @@
 		ranges = <
 			0 0x0 0xfc000000 0x04000000	// NOR FLASH bank 1
 			1 0x0 0xf8000000 0x08000000	// NOR FLASH bank 0
-			2 0x0 0xe3000000 0x00008000	// CAN (2 x i82527)
+			2 0x0 0xe3000000 0x00008000	// CAN (2 x CC770)
 			3 0x0 0xe3010000 0x00008000	// NAND FLASH
 
 		>;
@@ -393,18 +393,27 @@
 		};
 
 		/* Note: CAN support needs be enabled in U-Boot */
-		can0@2,0 {
-			compatible = "intel,82527"; // Bosch CC770
+		can@2,0 {
+			compatible = "bosch,cc770"; // Bosch CC770
 			reg = <2 0x0 0x100>;
 			interrupts = <4 1>;
 			interrupt-parent = <&mpic>;
+			bosch,external-clock-frequency = <16000000>;
+			bosch,disconnect-rx1-input;
+			bosch,disconnect-tx1-output;
+			bosch,iso-low-speed-mux;
+			bosch,clock-out-frequency = <16000000>;
 		};
 
-		can1@2,100 {
-			compatible = "intel,82527"; // Bosch CC770
+		can@2,100 {
+			compatible = "bosch,cc770"; // Bosch CC770
 			reg = <2 0x100 0x100>;
 			interrupts = <4 1>;
 			interrupt-parent = <&mpic>;
+			bosch,external-clock-frequency = <16000000>;
+			bosch,disconnect-rx1-input;
+			bosch,disconnect-tx1-output;
+			bosch,iso-low-speed-mux;
 		};
 
 		/* Note: NAND support needs to be enabled in U-Boot */
diff --git a/arch/powerpc/boot/dts/tqm8555.dts b/arch/powerpc/boot/dts/tqm8555.dts
index 81bad8c..aa6ff0d 100644
--- a/arch/powerpc/boot/dts/tqm8555.dts
+++ b/arch/powerpc/boot/dts/tqm8555.dts
@@ -224,7 +224,7 @@
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x100>; 	// reg base, size
 			clock-frequency = <0>; 	// should we fill in in uboot?
 			interrupts = <42 2>;
@@ -234,7 +234,7 @@
 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4600 0x100>;	// reg base, size
 			clock-frequency = <0>; 	// should we fill in in uboot?
 			interrupts = <42 2>;
diff --git a/arch/powerpc/boot/dts/tqm8xx.dts b/arch/powerpc/boot/dts/tqm8xx.dts
index f6da7ec..c3dba25 100644
--- a/arch/powerpc/boot/dts/tqm8xx.dts
+++ b/arch/powerpc/boot/dts/tqm8xx.dts
@@ -57,6 +57,7 @@
 
 		ranges = <
 			0x0 0x0 0x40000000 0x800000
+			0x3 0x0 0xc0000000 0x200
 		>;
 
 		flash@0,0 {
@@ -67,6 +68,30 @@
 			bank-width = <4>;
 			device-width = <2>;
 		};
+
+		/* Note: CAN support needs be enabled in U-Boot */
+		can@3,0 {
+			compatible = "intc,82527";
+			reg = <3 0x0 0x80>;
+			interrupts = <8 1>;
+			interrupt-parent = <&PIC>;
+			bosch,external-clock-frequency = <16000000>;
+			bosch,disconnect-rx1-input;
+			bosch,disconnect-tx1-output;
+			bosch,iso-low-speed-mux;
+			bosch,clock-out-frequency = <16000000>;
+		};
+
+		can@3,100 {
+			compatible = "intc,82527";
+			reg = <3 0x100 0x80>;
+			interrupts = <8 1>;
+			interrupt-parent = <&PIC>;
+			bosch,external-clock-frequency = <16000000>;
+			bosch,disconnect-rx1-input;
+			bosch,disconnect-tx1-output;
+			bosch,iso-low-speed-mux;
+		};
 	};
 
 	soc@fff00000 {
diff --git a/arch/powerpc/boot/dts/xcalibur1501.dts b/arch/powerpc/boot/dts/xcalibur1501.dts
index ac0a617..cc00f4d 100644
--- a/arch/powerpc/boot/dts/xcalibur1501.dts
+++ b/arch/powerpc/boot/dts/xcalibur1501.dts
@@ -531,7 +531,7 @@
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x100>;
 			clock-frequency = <0>;
 			interrupts = <42 2>;
@@ -542,7 +542,7 @@
 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4600 0x100>;
 			clock-frequency = <0>;
 			interrupts = <42 2>;
diff --git a/arch/powerpc/boot/dts/xpedite5200.dts b/arch/powerpc/boot/dts/xpedite5200.dts
index c41a80c..8fd7b70 100644
--- a/arch/powerpc/boot/dts/xpedite5200.dts
+++ b/arch/powerpc/boot/dts/xpedite5200.dts
@@ -333,7 +333,7 @@
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x100>;
 			clock-frequency = <0>;
 			current-speed = <115200>;
@@ -344,7 +344,7 @@
 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4600 0x100>;
 			clock-frequency = <0>;
 			current-speed = <115200>;
diff --git a/arch/powerpc/boot/dts/xpedite5200_xmon.dts b/arch/powerpc/boot/dts/xpedite5200_xmon.dts
index c0efcbb..0baa828 100644
--- a/arch/powerpc/boot/dts/xpedite5200_xmon.dts
+++ b/arch/powerpc/boot/dts/xpedite5200_xmon.dts
@@ -337,7 +337,7 @@
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x100>;
 			clock-frequency = <0>;
 			current-speed = <9600>;
@@ -348,7 +348,7 @@
 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4600 0x100>;
 			clock-frequency = <0>;
 			current-speed = <9600>;
diff --git a/arch/powerpc/boot/dts/xpedite5301.dts b/arch/powerpc/boot/dts/xpedite5301.dts
index db7faf5..53c1c6a 100644
--- a/arch/powerpc/boot/dts/xpedite5301.dts
+++ b/arch/powerpc/boot/dts/xpedite5301.dts
@@ -441,7 +441,7 @@
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x100>;
 			clock-frequency = <0>;
 			interrupts = <42 2>;
@@ -452,7 +452,7 @@
 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4600 0x100>;
 			clock-frequency = <0>;
 			interrupts = <42 2>;
diff --git a/arch/powerpc/boot/dts/xpedite5330.dts b/arch/powerpc/boot/dts/xpedite5330.dts
index c364ca6..2152259 100644
--- a/arch/powerpc/boot/dts/xpedite5330.dts
+++ b/arch/powerpc/boot/dts/xpedite5330.dts
@@ -477,7 +477,7 @@
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x100>;
 			clock-frequency = <0>;
 			interrupts = <42 2>;
@@ -488,7 +488,7 @@
 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4600 0x100>;
 			clock-frequency = <0>;
 			interrupts = <42 2>;
diff --git a/arch/powerpc/boot/dts/xpedite5370.dts b/arch/powerpc/boot/dts/xpedite5370.dts
index 7a8a4afd..11dbda1 100644
--- a/arch/powerpc/boot/dts/xpedite5370.dts
+++ b/arch/powerpc/boot/dts/xpedite5370.dts
@@ -439,7 +439,7 @@
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4500 0x100>;
 			clock-frequency = <0>;
 			interrupts = <42 2>;
@@ -450,7 +450,7 @@
 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
-			compatible = "ns16550";
+			compatible = "fsl,ns16550", "ns16550";
 			reg = <0x4600 0x100>;
 			clock-frequency = <0>;
 			interrupts = <42 2>;
diff --git a/arch/powerpc/boot/treeboot-currituck.c b/arch/powerpc/boot/treeboot-currituck.c
new file mode 100644
index 0000000..925ae43
--- /dev/null
+++ b/arch/powerpc/boot/treeboot-currituck.c
@@ -0,0 +1,119 @@
+/*
+ * Copyright © 2011 Tony Breeds IBM Corporation
+ *
+ * Based on earlier code:
+ *   Copyright (C) Paul Mackerras 1997.
+ *
+ *   Matt Porter <mporter@kernel.crashing.org>
+ *   Copyright 2002-2005 MontaVista Software Inc.
+ *
+ *   Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *   Copyright (c) 2003, 2004 Zultys Technologies
+ *
+ *    Copyright 2007 David Gibson, IBM Corporation.
+ *    Copyright 2010 Ben. Herrenschmidt, IBM Corporation.
+ *    Copyright © 2011 David Kleikamp IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <stdarg.h>
+#include <stddef.h>
+#include "types.h"
+#include "elf.h"
+#include "string.h"
+#include "stdio.h"
+#include "page.h"
+#include "ops.h"
+#include "reg.h"
+#include "io.h"
+#include "dcr.h"
+#include "4xx.h"
+#include "44x.h"
+#include "libfdt.h"
+
+BSS_STACK(4096);
+
+#define MAX_RANKS	0x4
+#define DDR3_MR0CF	0x80010011U
+
+static unsigned long long ibm_currituck_memsize;
+static unsigned long long ibm_currituck_detect_memsize(void)
+{
+	u32 reg;
+	unsigned i;
+	unsigned long long memsize = 0;
+
+	for(i = 0; i < MAX_RANKS; i++){
+		reg = mfdcrx(DDR3_MR0CF + i);
+
+		if (!(reg & 1))
+			continue;
+
+		reg &= 0x0000f000;
+		reg >>= 12;
+		memsize += (0x800000ULL << reg);
+	}
+
+	return memsize;
+}
+
+static void ibm_currituck_fixups(void)
+{
+	void *devp = finddevice("/");
+	u32 dma_ranges[7];
+
+	dt_fixup_memory(0x0ULL,  ibm_currituck_memsize);
+
+	while ((devp = find_node_by_devtype(devp, "pci"))) {
+		if (getprop(devp, "dma-ranges", dma_ranges, sizeof(dma_ranges)) < 0) {
+			printf("%s: Failed to get dma-ranges\r\n", __func__);
+			continue;
+		}
+
+		dma_ranges[5] = ibm_currituck_memsize >> 32;
+		dma_ranges[6] = ibm_currituck_memsize & 0xffffffffUL;
+
+		setprop(devp, "dma-ranges", dma_ranges, sizeof(dma_ranges));
+	}
+}
+
+#define SPRN_PIR	0x11E	/* Processor Indentification Register */
+void platform_init(void)
+{
+	unsigned long end_of_ram, avail_ram;
+	u32 pir_reg;
+	int node, size;
+	const u32 *timebase;
+
+	ibm_currituck_memsize = ibm_currituck_detect_memsize();
+	if (ibm_currituck_memsize >> 32)
+		end_of_ram = ~0UL;
+	else
+		end_of_ram = ibm_currituck_memsize;
+	avail_ram = end_of_ram - (unsigned long)_end;
+
+	simple_alloc_init(_end, avail_ram, 128, 64);
+	platform_ops.fixups = ibm_currituck_fixups;
+	platform_ops.exit = ibm44x_dbcr_reset;
+	pir_reg = mfspr(SPRN_PIR);
+
+	/* Make sure FDT blob is sane */
+	if (fdt_check_header(_dtb_start) != 0)
+		fatal("Invalid device tree blob\n");
+
+	node = fdt_node_offset_by_prop_value(_dtb_start, -1, "device_type",
+	                                     "cpu", sizeof("cpu"));
+	if (!node)
+		fatal("Cannot find cpu node\n");
+	timebase = fdt_getprop(_dtb_start, node, "timebase-frequency", &size);
+	if (timebase && (size == 4))
+		timebase_period_ns = 1000000000 / *timebase;
+
+	fdt_set_boot_cpuid_phys(_dtb_start, pir_reg);
+	fdt_init(_dtb_start);
+
+	serial_console_init();
+}
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index c74531a..f090e6d 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -163,7 +163,7 @@ coff)
     link_address='0x500000'
     pie=
     ;;
-miboot|uboot)
+miboot|uboot*)
     # miboot and U-boot want just the bare bits, not an ELF binary
     ext=bin
     objflags="-O binary"
@@ -244,6 +244,9 @@ gamecube|wii)
     link_address='0x600000'
     platformo="$object/$platform-head.o $object/$platform.o"
     ;;
+treeboot-currituck)
+    link_address='0x1000000'
+    ;;
 treeboot-iss4xx-mpic)
     platformo="$object/treeboot-iss4xx.o"
     ;;
@@ -257,6 +260,8 @@ vmz="$tmpdir/`basename \"$kernel\"`.$ext"
 if [ -z "$cacheit" -o ! -f "$vmz$gzip" -o "$vmz$gzip" -ot "$kernel" ]; then
     ${CROSS}objcopy $objflags "$kernel" "$vmz.$$"
 
+    strip_size=$(stat -c %s $vmz.$$)
+
     if [ -n "$gzip" ]; then
         gzip -n -f -9 "$vmz.$$"
     fi
@@ -266,6 +271,24 @@ if [ -z "$cacheit" -o ! -f "$vmz$gzip" -o "$vmz$gzip" -ot "$kernel" ]; then
     else
 	vmz="$vmz.$$"
     fi
+else
+    # Calculate the vmlinux.strip size
+    ${CROSS}objcopy $objflags "$kernel" "$vmz.$$"
+    strip_size=$(stat -c %s $vmz.$$)
+    rm -f $vmz.$$
+fi
+
+# Round the size to next higher MB limit
+round_size=$(((strip_size + 0xfffff) & 0xfff00000))
+
+round_size=0x$(printf "%x" $round_size)
+link_addr=$(printf "%d" $link_address)
+
+if [ $link_addr -lt $strip_size ]; then
+    echo "INFO: Uncompressed kernel (size 0x$(printf "%x\n" $strip_size))" \
+		"overlaps the address of the wrapper($link_address)"
+    echo "INFO: Fixing the link_address of wrapper to ($round_size)"
+    link_address=$round_size
 fi
 
 vmz="$vmz$gzip"
@@ -291,6 +314,26 @@ uboot)
     fi
     exit 0
     ;;
+uboot-obs600)
+    rm -f "$ofile"
+    # obs600 wants a multi image with an initrd, so we need to put a fake
+    # one in even when building a "normal" image.
+    if [ -n "$initrd" ]; then
+	real_rd="$initrd"
+    else
+	real_rd=`mktemp`
+	echo "\0" >>"$real_rd"
+    fi
+    ${MKIMAGE} -A ppc -O linux -T multi -C gzip -a $membase -e $membase \
+	$uboot_version -d "$vmz":"$real_rd":"$dtb" "$ofile"
+    if [ -z "$initrd" ]; then
+	rm -f "$real_rd"
+    fi
+    if [ -z "$cacheit" ]; then
+	rm -f "$vmz"
+    fi
+    exit 0
+    ;;
 esac
 
 addsec() {
diff --git a/arch/powerpc/configs/40x/klondike_defconfig b/arch/powerpc/configs/40x/klondike_defconfig
new file mode 100644
index 0000000..c0d228d
--- /dev/null
+++ b/arch/powerpc/configs/40x/klondike_defconfig
@@ -0,0 +1,55 @@
+CONFIG_40x=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_EMBEDDED=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_WALNUT is not set
+CONFIG_APM8018X=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_MATH_EMULATION=y
+# CONFIG_MIGRATION is not set
+# CONFIG_SUSPEND is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=35000
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_SCSI_SAS_ATTRS=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT4_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_CRAMFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_AVERAGE=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_FTRACE is not set
diff --git a/arch/powerpc/configs/40x/obs600_defconfig b/arch/powerpc/configs/40x/obs600_defconfig
new file mode 100644
index 0000000..91c110d
--- /dev/null
+++ b/arch/powerpc/configs/40x/obs600_defconfig
@@ -0,0 +1,83 @@
+CONFIG_40x=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_WALNUT is not set
+CONFIG_OBS600=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_MATH_EMULATION=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_CONNECTOR=y
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_NDFC=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=35000
+CONFIG_NETDEVICES=y
+CONFIG_IBM_EMAC=y
+CONFIG_IBM_EMAC_RXB=256
+CONFIG_IBM_EMAC_TXB=256
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_IBM_IIC=y
+CONFIG_SENSORS_LM75=y
+CONFIG_THERMAL=y
+# CONFIG_USB_SUPPORT is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1307=y
+CONFIG_EXT2_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/powerpc/configs/44x/currituck_defconfig b/arch/powerpc/configs/44x/currituck_defconfig
new file mode 100644
index 0000000..4192322
--- /dev/null
+++ b/arch/powerpc/configs/44x/currituck_defconfig
@@ -0,0 +1,110 @@
+CONFIG_44x=y
+CONFIG_SMP=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_EXPERT=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PPC_47x=y
+# CONFIG_EBONY is not set
+CONFIG_CURRITUCK=y
+CONFIG_HIGHMEM=y
+CONFIG_HZ_100=y
+CONFIG_MATH_EMULATION=y
+CONFIG_IRQ_ALL_CPUS=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+# CONFIG_SUSPEND is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_CONNECTOR=y
+CONFIG_MTD=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=35000
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+# CONFIG_SATA_PMP is not set
+CONFIG_SATA_SIL24=y
+# CONFIG_ATA_SFF is not set
+CONFIG_NETDEVICES=y
+CONFIG_E1000E=y
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_IBM_IIC=y
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_M41T80=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NLS_DEFAULT="n"
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_INFO=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_XMON=y
+CONFIG_XMON_DEFAULT=y
+CONFIG_PPC_EARLY_DEBUG=y
+CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0x10000000
+CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x200
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
diff --git a/arch/powerpc/configs/44x/iss476-smp_defconfig b/arch/powerpc/configs/44x/iss476-smp_defconfig
index a6eb6ad..ca00cf7 100644
--- a/arch/powerpc/configs/44x/iss476-smp_defconfig
+++ b/arch/powerpc/configs/44x/iss476-smp_defconfig
@@ -25,7 +25,8 @@ CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="root=/dev/issblk0"
 # CONFIG_PCI is not set
 CONFIG_ADVANCED_OPTIONS=y
-CONFIG_RELOCATABLE=y
+CONFIG_NONSTATIC_KERNEL=y
+CONFIG_DYNAMIC_MEMSTART=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
diff --git a/arch/powerpc/configs/chroma_defconfig b/arch/powerpc/configs/chroma_defconfig
new file mode 100644
index 0000000..acf7fb2
--- /dev/null
+++ b/arch/powerpc/configs/chroma_defconfig
@@ -0,0 +1,307 @@
+CONFIG_PPC64=y
+CONFIG_PPC_BOOK3E_64=y
+# CONFIG_VIRT_CPU_ACCOUNTING is not set
+CONFIG_SMP=y
+CONFIG_NR_CPUS=256
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=19
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_MEM_RES_CTLR=y
+CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
+CONFIG_NAMESPACES=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_INITRAMFS_COMPRESSION_GZIP=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+CONFIG_PERF_COUNTERS=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_SCOM_DEBUGFS=y
+CONFIG_PPC_A2_DD2=y
+CONFIG_KVM_GUEST=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_HZ_100=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_BINFMT_MISC=y
+CONFIG_NUMA=y
+# CONFIG_MIGRATION is not set
+CONFIG_PPC_64K_PAGES=y
+CONFIG_SCHED_SMT=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+# CONFIG_SECCOMP is not set
+CONFIG_PCIEPORTBUS=y
+# CONFIG_PCIEASPM is not set
+CONFIG_PCI_MSI=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=m
+CONFIG_XFRM_SUB_POLICY=y
+CONFIG_XFRM_STATISTICS=y
+CONFIG_NET_KEY=m
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_NET_IPIP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=y
+CONFIG_INET6_ESP=y
+CONFIG_INET6_IPCOMP=y
+CONFIG_IPV6_MIP6=y
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=y
+CONFIG_IPV6_TUNNEL=y
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_PIMSM_V2=y
+CONFIG_NETFILTER=y
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NET_TCPPROBE=y
+# CONFIG_WIRELESS is not set
+CONFIG_NET_9P=y
+CONFIG_NET_9P_DEBUG=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_MTD=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_LE_BYTE_SWAP=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_CDROM_PKTCDVD=y
+CONFIG_MISC_DEVICES=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=y
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SRP_ATTRS=y
+CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_SIL24=y
+CONFIG_SATA_MV=y
+CONFIG_SATA_SIL=y
+CONFIG_PATA_CMD64X=y
+CONFIG_PATA_MARVELL=y
+CONFIG_PATA_SIL680=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_LINEAR=y
+CONFIG_BLK_DEV_DM=y
+CONFIG_DM_CRYPT=y
+CONFIG_DM_SNAPSHOT=y
+CONFIG_DM_MIRROR=y
+CONFIG_DM_ZERO=y
+CONFIG_DM_UEVENT=y
+CONFIG_NETDEVICES=y
+CONFIG_TUN=y
+CONFIG_E1000E=y
+CONFIG_TIGON3=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=1024
+# CONFIG_HWMON is not set
+# CONFIG_VGA_ARB is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EDAC=y
+CONFIG_EDAC_MM_EDAC=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1511=y
+CONFIG_RTC_DRV_DS1553=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT2_FS_XIP=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_FUSE_FS=y
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=m
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_ROOT_NFS=y
+CONFIG_CIFS=y
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC_T10DIF=y
+CONFIG_LIBCRC32C=m
+CONFIG_PRINTK_TIME=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_DEBUG_INFO=y
+CONFIG_FTRACE_SYSCALLS=y
+CONFIG_PPC_EMULATED_STATS=y
+CONFIG_XMON=y
+CONFIG_XMON_DEFAULT=y
+CONFIG_VIRQ_DEBUG=y
+CONFIG_PPC_EARLY_DEBUG=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_VIRTUALIZATION=y
diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig
index f087de6..f8aef20 100644
--- a/arch/powerpc/configs/corenet32_smp_defconfig
+++ b/arch/powerpc/configs/corenet32_smp_defconfig
@@ -37,6 +37,8 @@ CONFIG_FSL_LBC=y
 CONFIG_PCI=y
 CONFIG_PCIEPORTBUS=y
 # CONFIG_PCIEASPM is not set
+CONFIG_RAPIDIO=y
+CONFIG_FSL_RIO=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -94,17 +96,17 @@ CONFIG_SATA_SIL24=y
 CONFIG_SATA_SIL=y
 CONFIG_PATA_SIL680=y
 CONFIG_NETDEVICES=y
-CONFIG_VITESSE_PHY=y
-CONFIG_FIXED_PHY=y
-CONFIG_NET_ETHERNET=y
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_E1000=y
 CONFIG_E1000E=y
-CONFIG_FSL_PQ_MDIO=y
+CONFIG_VITESSE_PHY=y
+CONFIG_FIXED_PHY=y
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_LEGACY_PTYS is not set
+CONFIG_PPC_EPAPR_HV_BYTECHAN=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_EXTENDED=y
@@ -155,6 +157,7 @@ CONFIG_VFAT_FS=y
 CONFIG_NTFS_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
+CONFIG_HUGETLBFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_CRAMFS=y
 CONFIG_NFS_FS=y
diff --git a/arch/powerpc/configs/corenet64_smp_defconfig b/arch/powerpc/configs/corenet64_smp_defconfig
index 782822c..7ed8d4c 100644
--- a/arch/powerpc/configs/corenet64_smp_defconfig
+++ b/arch/powerpc/configs/corenet64_smp_defconfig
@@ -23,6 +23,8 @@ CONFIG_P5020_DS=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BINFMT_MISC=m
+CONFIG_RAPIDIO=y
+CONFIG_FSL_RIO=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -57,7 +59,6 @@ CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_LEGACY=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-CONFIG_NET_ETHERNET=y
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_KEYBOARD is not set
@@ -81,6 +82,7 @@ CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
+CONFIG_HUGETLBFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_MAC_PARTITION=y
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index a1e5a17..f37a2ab 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -1,5 +1,4 @@
 CONFIG_PPC_85xx=y
-CONFIG_PHYS_64BIT=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -93,15 +92,14 @@ CONFIG_SATA_FSL=y
 CONFIG_PATA_ALI=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
+CONFIG_FS_ENET=y
+CONFIG_UCC_GETH=y
+CONFIG_GIANFAR=y
 CONFIG_MARVELL_PHY=y
 CONFIG_DAVICOM_PHY=y
 CONFIG_CICADA_PHY=y
 CONFIG_VITESSE_PHY=y
 CONFIG_FIXED_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_FS_ENET=y
-CONFIG_GIANFAR=y
-CONFIG_UCC_GETH=y
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_KEYBOARD is not set
@@ -120,6 +118,9 @@ CONFIG_NVRAM=y
 CONFIG_I2C=y
 CONFIG_I2C_CPM=m
 CONFIG_I2C_MPC=y
+CONFIG_SPI=y
+CONFIG_SPI_FSL_SPI=y
+CONFIG_SPI_FSL_ESPI=y
 CONFIG_GPIO_MPC8XXX=y
 # CONFIG_HWMON is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
@@ -163,6 +164,10 @@ CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
 CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_OF_ESDHC=y
 CONFIG_EDAC=y
 CONFIG_EDAC_MM_EDAC=y
 CONFIG_RTC_CLASS=y
@@ -182,6 +187,7 @@ CONFIG_VFAT_FS=y
 CONFIG_NTFS_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
+CONFIG_HUGETLBFS=y
 CONFIG_ADFS_FS=m
 CONFIG_AFFS_FS=m
 CONFIG_HFS_FS=m
@@ -213,4 +219,5 @@ CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
 CONFIG_CRYPTO_AES=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_DEV_FSL_CAAM=y
 CONFIG_CRYPTO_DEV_TALITOS=y
diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig
index dd1e413..abdcd31 100644
--- a/arch/powerpc/configs/mpc85xx_smp_defconfig
+++ b/arch/powerpc/configs/mpc85xx_smp_defconfig
@@ -1,5 +1,4 @@
 CONFIG_PPC_85xx=y
-CONFIG_PHYS_64BIT=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=8
 CONFIG_EXPERIMENTAL=y
@@ -26,6 +25,7 @@ CONFIG_MPC85xx_MDS=y
 CONFIG_MPC8536_DS=y
 CONFIG_MPC85xx_DS=y
 CONFIG_MPC85xx_RDB=y
+CONFIG_P1010_RDB=y
 CONFIG_P1022_DS=y
 CONFIG_P1023_RDS=y
 CONFIG_SOCRATES=y
@@ -94,15 +94,14 @@ CONFIG_SATA_FSL=y
 CONFIG_PATA_ALI=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
+CONFIG_FS_ENET=y
+CONFIG_UCC_GETH=y
+CONFIG_GIANFAR=y
 CONFIG_MARVELL_PHY=y
 CONFIG_DAVICOM_PHY=y
 CONFIG_CICADA_PHY=y
 CONFIG_VITESSE_PHY=y
 CONFIG_FIXED_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_FS_ENET=y
-CONFIG_GIANFAR=y
-CONFIG_UCC_GETH=y
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_KEYBOARD is not set
@@ -121,6 +120,9 @@ CONFIG_NVRAM=y
 CONFIG_I2C=y
 CONFIG_I2C_CPM=m
 CONFIG_I2C_MPC=y
+CONFIG_SPI=y
+CONFIG_SPI_FSL_SPI=y
+CONFIG_SPI_FSL_ESPI=y
 CONFIG_GPIO_MPC8XXX=y
 # CONFIG_HWMON is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
@@ -164,6 +166,10 @@ CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
 CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_OF_ESDHC=y
 CONFIG_EDAC=y
 CONFIG_EDAC_MM_EDAC=y
 CONFIG_RTC_CLASS=y
@@ -183,6 +189,7 @@ CONFIG_VFAT_FS=y
 CONFIG_NTFS_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
+CONFIG_HUGETLBFS=y
 CONFIG_ADFS_FS=m
 CONFIG_AFFS_FS=m
 CONFIG_HFS_FS=m
@@ -214,4 +221,5 @@ CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
 CONFIG_CRYPTO_AES=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_DEV_FSL_CAAM=y
 CONFIG_CRYPTO_DEV_TALITOS=y
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index 535711f..2156e07 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -390,6 +390,11 @@ CONFIG_HUGETLBFS=y
 CONFIG_HFS_FS=m
 CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_ZLIB=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig
index 185c292..ded8678 100644
--- a/arch/powerpc/configs/ps3_defconfig
+++ b/arch/powerpc/configs/ps3_defconfig
@@ -6,10 +6,10 @@ CONFIG_NR_CPUS=2
 CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_NAMESPACES=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
 # CONFIG_PERF_EVENTS is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
@@ -17,6 +17,7 @@ CONFIG_PROFILING=y
 CONFIG_OPROFILE=m
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
+# CONFIG_PPC_POWERNV is not set
 # CONFIG_PPC_PSERIES is not set
 # CONFIG_PPC_PMAC is not set
 CONFIG_PPC_PS3=y
@@ -27,14 +28,14 @@ CONFIG_PS3_VRAM=m
 CONFIG_PS3_LPM=m
 # CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
 CONFIG_HIGH_RES_TIMERS=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_BINFMT_MISC=y
 CONFIG_KEXEC=y
-CONFIG_SPARSE_IRQ=y
 # CONFIG_SPARSEMEM_VMEMMAP is not set
 CONFIG_SCHED_SMT=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE=""
-CONFIG_PM=y
+CONFIG_PM_RUNTIME=y
 CONFIG_PM_DEBUG=y
 # CONFIG_SECCOMP is not set
 # CONFIG_PCI is not set
@@ -81,20 +82,23 @@ CONFIG_SCSI_MULTI_LUN=y
 CONFIG_MD=y
 CONFIG_BLK_DEV_DM=m
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
 CONFIG_GELIC_NET=y
 CONFIG_GELIC_WIRELESS=y
-# CONFIG_NETDEV_10000 is not set
+# CONFIG_NET_VENDOR_XILINX is not set
 CONFIG_USB_USBNET=m
 # CONFIG_USB_NET_CDCETHER is not set
+# CONFIG_USB_NET_CDC_NCM is not set
 # CONFIG_USB_NET_NET1080 is not set
 # CONFIG_USB_NET_CDC_SUBSET is not set
 # CONFIG_USB_NET_ZAURUS is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPPOE=m
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_JOYDEV=m
@@ -135,22 +139,21 @@ CONFIG_USB=m
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_SUSPEND=y
 CONFIG_USB_MON=m
 CONFIG_USB_EHCI_HCD=m
-CONFIG_USB_EHCI_TT_NEWSCHED=y
 # CONFIG_USB_EHCI_HCD_PPC_OF is not set
 CONFIG_USB_OHCI_HCD=m
 CONFIG_USB_STORAGE=m
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PS3=m
+CONFIG_RTC_DRV_PS3=y
+# CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT2_FS=m
 CONFIG_EXT3_FS=m
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT4_FS=y
-CONFIG_INOTIFY=y
 CONFIG_QUOTA=y
 CONFIG_QFMT_V2=y
-CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
@@ -167,19 +170,17 @@ CONFIG_CIFS=m
 CONFIG_NLS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
+CONFIG_CRC_CCITT=m
 CONFIG_CRC_T10DIF=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_PROVE_LOCKING=y
 CONFIG_DEBUG_LOCKDEP=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
 CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_WRITECOUNT=y
 CONFIG_DEBUG_MEMORY_INIT=y
 CONFIG_DEBUG_LIST=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index a72f241..30e7d0d 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -304,6 +304,11 @@ CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_HUGETLBFS=y
 CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_ZLIB=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
diff --git a/arch/powerpc/include/asm/Kbuild b/arch/powerpc/include/asm/Kbuild
index d51df17..7e313f1 100644
--- a/arch/powerpc/include/asm/Kbuild
+++ b/arch/powerpc/include/asm/Kbuild
@@ -34,3 +34,5 @@ header-y += termios.h
 header-y += types.h
 header-y += ucontext.h
 header-y += unistd.h
+
+generic-y += rwsem.h
diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index e30442c..ad55a1c 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -201,6 +201,7 @@ extern const char *powerpc_base_platform;
 #define CPU_FTR_POPCNTB			LONG_ASM_CONST(0x0400000000000000)
 #define CPU_FTR_POPCNTD			LONG_ASM_CONST(0x0800000000000000)
 #define CPU_FTR_ICSWX			LONG_ASM_CONST(0x1000000000000000)
+#define CPU_FTR_VMX_COPY		LONG_ASM_CONST(0x2000000000000000)
 
 #ifndef __ASSEMBLY__
 
@@ -425,7 +426,7 @@ extern const char *powerpc_base_platform;
 	    CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \
 	    CPU_FTR_DSCR | CPU_FTR_SAO  | CPU_FTR_ASYM_SMT | \
 	    CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \
-	    CPU_FTR_ICSWX | CPU_FTR_CFAR | CPU_FTR_HVMODE)
+	    CPU_FTR_ICSWX | CPU_FTR_CFAR | CPU_FTR_HVMODE | CPU_FTR_VMX_COPY)
 #define CPU_FTRS_CELL	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
 	    CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
 	    CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \
@@ -437,7 +438,7 @@ extern const char *powerpc_base_platform;
 #define CPU_FTRS_COMPATIBLE	(CPU_FTR_USE_TB | CPU_FTR_PPCAS_ARCH_V2)
 
 #define CPU_FTRS_A2 (CPU_FTR_USE_TB | CPU_FTR_SMT | CPU_FTR_DBELL | \
-		     CPU_FTR_NOEXECUTE | CPU_FTR_NODSISRALIGN)
+		     CPU_FTR_NOEXECUTE | CPU_FTR_NODSISRALIGN | CPU_FTR_ICSWX)
 
 #ifdef __powerpc64__
 #ifdef CONFIG_PPC_BOOK3E
diff --git a/arch/powerpc/include/asm/cputime.h b/arch/powerpc/include/asm/cputime.h
index 1cf20bd..487d46f 100644
--- a/arch/powerpc/include/asm/cputime.h
+++ b/arch/powerpc/include/asm/cputime.h
@@ -29,25 +29,8 @@ static inline void setup_cputime_one_jiffy(void) { }
 #include <asm/time.h>
 #include <asm/param.h>
 
-typedef u64 cputime_t;
-typedef u64 cputime64_t;
-
-#define cputime_zero			((cputime_t)0)
-#define cputime_max			((~((cputime_t)0) >> 1) - 1)
-#define cputime_add(__a, __b)		((__a) +  (__b))
-#define cputime_sub(__a, __b)		((__a) -  (__b))
-#define cputime_div(__a, __n)		((__a) /  (__n))
-#define cputime_halve(__a)		((__a) >> 1)
-#define cputime_eq(__a, __b)		((__a) == (__b))
-#define cputime_gt(__a, __b)		((__a) >  (__b))
-#define cputime_ge(__a, __b)		((__a) >= (__b))
-#define cputime_lt(__a, __b)		((__a) <  (__b))
-#define cputime_le(__a, __b)		((__a) <= (__b))
-
-#define cputime64_zero			((cputime64_t)0)
-#define cputime64_add(__a, __b)		((__a) + (__b))
-#define cputime64_sub(__a, __b)		((__a) - (__b))
-#define cputime_to_cputime64(__ct)	(__ct)
+typedef u64 __nocast cputime_t;
+typedef u64 __nocast cputime64_t;
 
 #ifdef __KERNEL__
 
@@ -65,7 +48,7 @@ DECLARE_PER_CPU(unsigned long, cputime_scaled_last_delta);
 
 static inline unsigned long cputime_to_jiffies(const cputime_t ct)
 {
-	return mulhdu(ct, __cputime_jiffies_factor);
+	return mulhdu((__force u64) ct, __cputime_jiffies_factor);
 }
 
 /* Estimate the scaled cputime by scaling the real cputime based on
@@ -74,14 +57,15 @@ static inline cputime_t cputime_to_scaled(const cputime_t ct)
 {
 	if (cpu_has_feature(CPU_FTR_SPURR) &&
 	    __get_cpu_var(cputime_last_delta))
-		return ct * __get_cpu_var(cputime_scaled_last_delta) /
-			    __get_cpu_var(cputime_last_delta);
+		return (__force u64) ct *
+			__get_cpu_var(cputime_scaled_last_delta) /
+			__get_cpu_var(cputime_last_delta);
 	return ct;
 }
 
 static inline cputime_t jiffies_to_cputime(const unsigned long jif)
 {
-	cputime_t ct;
+	u64 ct;
 	unsigned long sec;
 
 	/* have to be a little careful about overflow */
@@ -93,7 +77,7 @@ static inline cputime_t jiffies_to_cputime(const unsigned long jif)
 	}
 	if (sec)
 		ct += (cputime_t) sec * tb_ticks_per_sec;
-	return ct;
+	return (__force cputime_t) ct;
 }
 
 static inline void setup_cputime_one_jiffy(void)
@@ -103,7 +87,7 @@ static inline void setup_cputime_one_jiffy(void)
 
 static inline cputime64_t jiffies64_to_cputime64(const u64 jif)
 {
-	cputime_t ct;
+	u64 ct;
 	u64 sec;
 
 	/* have to be a little careful about overflow */
@@ -114,28 +98,28 @@ static inline cputime64_t jiffies64_to_cputime64(const u64 jif)
 		do_div(ct, HZ);
 	}
 	if (sec)
-		ct += (cputime_t) sec * tb_ticks_per_sec;
-	return ct;
+		ct += (u64) sec * tb_ticks_per_sec;
+	return (__force cputime64_t) ct;
 }
 
 static inline u64 cputime64_to_jiffies64(const cputime_t ct)
 {
-	return mulhdu(ct, __cputime_jiffies_factor);
+	return mulhdu((__force u64) ct, __cputime_jiffies_factor);
 }
 
 /*
  * Convert cputime <-> microseconds
  */
-extern u64 __cputime_msec_factor;
+extern u64 __cputime_usec_factor;
 
 static inline unsigned long cputime_to_usecs(const cputime_t ct)
 {
-	return mulhdu(ct, __cputime_msec_factor) * USEC_PER_MSEC;
+	return mulhdu((__force u64) ct, __cputime_usec_factor);
 }
 
 static inline cputime_t usecs_to_cputime(const unsigned long us)
 {
-	cputime_t ct;
+	u64 ct;
 	unsigned long sec;
 
 	/* have to be a little careful about overflow */
@@ -143,13 +127,15 @@ static inline cputime_t usecs_to_cputime(const unsigned long us)
 	sec = us / 1000000;
 	if (ct) {
 		ct *= tb_ticks_per_sec;
-		do_div(ct, 1000);
+		do_div(ct, 1000000);
 	}
 	if (sec)
 		ct += (cputime_t) sec * tb_ticks_per_sec;
-	return ct;
+	return (__force cputime_t) ct;
 }
 
+#define usecs_to_cputime64(us)		usecs_to_cputime(us)
+
 /*
  * Convert cputime <-> seconds
  */
@@ -157,12 +143,12 @@ extern u64 __cputime_sec_factor;
 
 static inline unsigned long cputime_to_secs(const cputime_t ct)
 {
-	return mulhdu(ct, __cputime_sec_factor);
+	return mulhdu((__force u64) ct, __cputime_sec_factor);
 }
 
 static inline cputime_t secs_to_cputime(const unsigned long sec)
 {
-	return (cputime_t) sec * tb_ticks_per_sec;
+	return (__force cputime_t)((u64) sec * tb_ticks_per_sec);
 }
 
 /*
@@ -170,7 +156,7 @@ static inline cputime_t secs_to_cputime(const unsigned long sec)
  */
 static inline void cputime_to_timespec(const cputime_t ct, struct timespec *p)
 {
-	u64 x = ct;
+	u64 x = (__force u64) ct;
 	unsigned int frac;
 
 	frac = do_div(x, tb_ticks_per_sec);
@@ -182,11 +168,11 @@ static inline void cputime_to_timespec(const cputime_t ct, struct timespec *p)
 
 static inline cputime_t timespec_to_cputime(const struct timespec *p)
 {
-	cputime_t ct;
+	u64 ct;
 
 	ct = (u64) p->tv_nsec * tb_ticks_per_sec;
 	do_div(ct, 1000000000);
-	return ct + (u64) p->tv_sec * tb_ticks_per_sec;
+	return (__force cputime_t)(ct + (u64) p->tv_sec * tb_ticks_per_sec);
 }
 
 /*
@@ -194,7 +180,7 @@ static inline cputime_t timespec_to_cputime(const struct timespec *p)
  */
 static inline void cputime_to_timeval(const cputime_t ct, struct timeval *p)
 {
-	u64 x = ct;
+	u64 x = (__force u64) ct;
 	unsigned int frac;
 
 	frac = do_div(x, tb_ticks_per_sec);
@@ -206,11 +192,11 @@ static inline void cputime_to_timeval(const cputime_t ct, struct timeval *p)
 
 static inline cputime_t timeval_to_cputime(const struct timeval *p)
 {
-	cputime_t ct;
+	u64 ct;
 
 	ct = (u64) p->tv_usec * tb_ticks_per_sec;
 	do_div(ct, 1000000);
-	return ct + (u64) p->tv_sec * tb_ticks_per_sec;
+	return (__force cputime_t)(ct + (u64) p->tv_sec * tb_ticks_per_sec);
 }
 
 /*
@@ -220,12 +206,12 @@ extern u64 __cputime_clockt_factor;
 
 static inline unsigned long cputime_to_clock_t(const cputime_t ct)
 {
-	return mulhdu(ct, __cputime_clockt_factor);
+	return mulhdu((__force u64) ct, __cputime_clockt_factor);
 }
 
 static inline cputime_t clock_t_to_cputime(const unsigned long clk)
 {
-	cputime_t ct;
+	u64 ct;
 	unsigned long sec;
 
 	/* have to be a little careful about overflow */
@@ -236,8 +222,8 @@ static inline cputime_t clock_t_to_cputime(const unsigned long clk)
 		do_div(ct, USER_HZ);
 	}
 	if (sec)
-		ct += (cputime_t) sec * tb_ticks_per_sec;
-	return ct;
+		ct += (u64) sec * tb_ticks_per_sec;
+	return (__force cputime_t) ct;
 }
 
 #define cputime64_to_clock_t(ct)	cputime_to_clock_t((cputime_t)(ct))
diff --git a/arch/powerpc/include/asm/fsl_ifc.h b/arch/powerpc/include/asm/fsl_ifc.h
new file mode 100644
index 0000000..b955012
--- /dev/null
+++ b/arch/powerpc/include/asm/fsl_ifc.h
@@ -0,0 +1,834 @@
+/* Freescale Integrated Flash Controller
+ *
+ * Copyright 2011 Freescale Semiconductor, Inc
+ *
+ * Author: Dipen Dudhat <dipen.dudhat@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_FSL_IFC_H
+#define __ASM_FSL_IFC_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <linux/io.h>
+
+#include <linux/of_platform.h>
+#include <linux/interrupt.h>
+
+#define FSL_IFC_BANK_COUNT 4
+
+/*
+ * CSPR - Chip Select Property Register
+ */
+#define CSPR_BA				0xFFFF0000
+#define CSPR_BA_SHIFT			16
+#define CSPR_PORT_SIZE			0x00000180
+#define CSPR_PORT_SIZE_SHIFT		7
+/* Port Size 8 bit */
+#define CSPR_PORT_SIZE_8		0x00000080
+/* Port Size 16 bit */
+#define CSPR_PORT_SIZE_16		0x00000100
+/* Port Size 32 bit */
+#define CSPR_PORT_SIZE_32		0x00000180
+/* Write Protect */
+#define CSPR_WP				0x00000040
+#define CSPR_WP_SHIFT			6
+/* Machine Select */
+#define CSPR_MSEL			0x00000006
+#define CSPR_MSEL_SHIFT			1
+/* NOR */
+#define CSPR_MSEL_NOR			0x00000000
+/* NAND */
+#define CSPR_MSEL_NAND			0x00000002
+/* GPCM */
+#define CSPR_MSEL_GPCM			0x00000004
+/* Bank Valid */
+#define CSPR_V				0x00000001
+#define CSPR_V_SHIFT			0
+
+/*
+ * Address Mask Register
+ */
+#define IFC_AMASK_MASK			0xFFFF0000
+#define IFC_AMASK_SHIFT			16
+#define IFC_AMASK(n)			(IFC_AMASK_MASK << \
+					(__ilog2(n) - IFC_AMASK_SHIFT))
+
+/*
+ * Chip Select Option Register IFC_NAND Machine
+ */
+/* Enable ECC Encoder */
+#define CSOR_NAND_ECC_ENC_EN		0x80000000
+#define CSOR_NAND_ECC_MODE_MASK		0x30000000
+/* 4 bit correction per 520 Byte sector */
+#define CSOR_NAND_ECC_MODE_4		0x00000000
+/* 8 bit correction per 528 Byte sector */
+#define CSOR_NAND_ECC_MODE_8		0x10000000
+/* Enable ECC Decoder */
+#define CSOR_NAND_ECC_DEC_EN		0x04000000
+/* Row Address Length */
+#define CSOR_NAND_RAL_MASK		0x01800000
+#define CSOR_NAND_RAL_SHIFT		20
+#define CSOR_NAND_RAL_1			0x00000000
+#define CSOR_NAND_RAL_2			0x00800000
+#define CSOR_NAND_RAL_3			0x01000000
+#define CSOR_NAND_RAL_4			0x01800000
+/* Page Size 512b, 2k, 4k */
+#define CSOR_NAND_PGS_MASK		0x00180000
+#define CSOR_NAND_PGS_SHIFT		16
+#define CSOR_NAND_PGS_512		0x00000000
+#define CSOR_NAND_PGS_2K		0x00080000
+#define CSOR_NAND_PGS_4K		0x00100000
+/* Spare region Size */
+#define CSOR_NAND_SPRZ_MASK		0x0000E000
+#define CSOR_NAND_SPRZ_SHIFT		13
+#define CSOR_NAND_SPRZ_16		0x00000000
+#define CSOR_NAND_SPRZ_64		0x00002000
+#define CSOR_NAND_SPRZ_128		0x00004000
+#define CSOR_NAND_SPRZ_210		0x00006000
+#define CSOR_NAND_SPRZ_218		0x00008000
+#define CSOR_NAND_SPRZ_224		0x0000A000
+/* Pages Per Block */
+#define CSOR_NAND_PB_MASK		0x00000700
+#define CSOR_NAND_PB_SHIFT		8
+#define CSOR_NAND_PB(n)		((__ilog2(n) - 5) << CSOR_NAND_PB_SHIFT)
+/* Time for Read Enable High to Output High Impedance */
+#define CSOR_NAND_TRHZ_MASK		0x0000001C
+#define CSOR_NAND_TRHZ_SHIFT		2
+#define CSOR_NAND_TRHZ_20		0x00000000
+#define CSOR_NAND_TRHZ_40		0x00000004
+#define CSOR_NAND_TRHZ_60		0x00000008
+#define CSOR_NAND_TRHZ_80		0x0000000C
+#define CSOR_NAND_TRHZ_100		0x00000010
+/* Buffer control disable */
+#define CSOR_NAND_BCTLD			0x00000001
+
+/*
+ * Chip Select Option Register - NOR Flash Mode
+ */
+/* Enable Address shift Mode */
+#define CSOR_NOR_ADM_SHFT_MODE_EN	0x80000000
+/* Page Read Enable from NOR device */
+#define CSOR_NOR_PGRD_EN		0x10000000
+/* AVD Toggle Enable during Burst Program */
+#define CSOR_NOR_AVD_TGL_PGM_EN		0x01000000
+/* Address Data Multiplexing Shift */
+#define CSOR_NOR_ADM_MASK		0x0003E000
+#define CSOR_NOR_ADM_SHIFT_SHIFT	13
+#define CSOR_NOR_ADM_SHIFT(n)	((n) << CSOR_NOR_ADM_SHIFT_SHIFT)
+/* Type of the NOR device hooked */
+#define CSOR_NOR_NOR_MODE_AYSNC_NOR	0x00000000
+#define CSOR_NOR_NOR_MODE_AVD_NOR	0x00000020
+/* Time for Read Enable High to Output High Impedance */
+#define CSOR_NOR_TRHZ_MASK		0x0000001C
+#define CSOR_NOR_TRHZ_SHIFT		2
+#define CSOR_NOR_TRHZ_20		0x00000000
+#define CSOR_NOR_TRHZ_40		0x00000004
+#define CSOR_NOR_TRHZ_60		0x00000008
+#define CSOR_NOR_TRHZ_80		0x0000000C
+#define CSOR_NOR_TRHZ_100		0x00000010
+/* Buffer control disable */
+#define CSOR_NOR_BCTLD			0x00000001
+
+/*
+ * Chip Select Option Register - GPCM Mode
+ */
+/* GPCM Mode - Normal */
+#define CSOR_GPCM_GPMODE_NORMAL		0x00000000
+/* GPCM Mode - GenericASIC */
+#define CSOR_GPCM_GPMODE_ASIC		0x80000000
+/* Parity Mode odd/even */
+#define CSOR_GPCM_PARITY_EVEN		0x40000000
+/* Parity Checking enable/disable */
+#define CSOR_GPCM_PAR_EN		0x20000000
+/* GPCM Timeout Count */
+#define CSOR_GPCM_GPTO_MASK		0x0F000000
+#define CSOR_GPCM_GPTO_SHIFT		24
+#define CSOR_GPCM_GPTO(n)	((__ilog2(n) - 8) << CSOR_GPCM_GPTO_SHIFT)
+/* GPCM External Access Termination mode for read access */
+#define CSOR_GPCM_RGETA_EXT		0x00080000
+/* GPCM External Access Termination mode for write access */
+#define CSOR_GPCM_WGETA_EXT		0x00040000
+/* Address Data Multiplexing Shift */
+#define CSOR_GPCM_ADM_MASK		0x0003E000
+#define CSOR_GPCM_ADM_SHIFT_SHIFT	13
+#define CSOR_GPCM_ADM_SHIFT(n)	((n) << CSOR_GPCM_ADM_SHIFT_SHIFT)
+/* Generic ASIC Parity error indication delay */
+#define CSOR_GPCM_GAPERRD_MASK		0x00000180
+#define CSOR_GPCM_GAPERRD_SHIFT		7
+#define CSOR_GPCM_GAPERRD(n)	(((n) - 1) << CSOR_GPCM_GAPERRD_SHIFT)
+/* Time for Read Enable High to Output High Impedance */
+#define CSOR_GPCM_TRHZ_MASK		0x0000001C
+#define CSOR_GPCM_TRHZ_20		0x00000000
+#define CSOR_GPCM_TRHZ_40		0x00000004
+#define CSOR_GPCM_TRHZ_60		0x00000008
+#define CSOR_GPCM_TRHZ_80		0x0000000C
+#define CSOR_GPCM_TRHZ_100		0x00000010
+/* Buffer control disable */
+#define CSOR_GPCM_BCTLD			0x00000001
+
+/*
+ * Ready Busy Status Register (RB_STAT)
+ */
+/* CSn is READY */
+#define IFC_RB_STAT_READY_CS0		0x80000000
+#define IFC_RB_STAT_READY_CS1		0x40000000
+#define IFC_RB_STAT_READY_CS2		0x20000000
+#define IFC_RB_STAT_READY_CS3		0x10000000
+
+/*
+ * General Control Register (GCR)
+ */
+#define IFC_GCR_MASK			0x8000F800
+/* reset all IFC hardware */
+#define IFC_GCR_SOFT_RST_ALL		0x80000000
+/* Turnaroud Time of external buffer */
+#define IFC_GCR_TBCTL_TRN_TIME		0x0000F800
+#define IFC_GCR_TBCTL_TRN_TIME_SHIFT	11
+
+/*
+ * Common Event and Error Status Register (CM_EVTER_STAT)
+ */
+/* Chip select error */
+#define IFC_CM_EVTER_STAT_CSER		0x80000000
+
+/*
+ * Common Event and Error Enable Register (CM_EVTER_EN)
+ */
+/* Chip select error checking enable */
+#define IFC_CM_EVTER_EN_CSEREN		0x80000000
+
+/*
+ * Common Event and Error Interrupt Enable Register (CM_EVTER_INTR_EN)
+ */
+/* Chip select error interrupt enable */
+#define IFC_CM_EVTER_INTR_EN_CSERIREN	0x80000000
+
+/*
+ * Common Transfer Error Attribute Register-0 (CM_ERATTR0)
+ */
+/* transaction type of error Read/Write */
+#define IFC_CM_ERATTR0_ERTYP_READ	0x80000000
+#define IFC_CM_ERATTR0_ERAID		0x0FF00000
+#define IFC_CM_ERATTR0_ERAID_SHIFT	20
+#define IFC_CM_ERATTR0_ESRCID		0x0000FF00
+#define IFC_CM_ERATTR0_ESRCID_SHIFT	8
+
+/*
+ * Clock Control Register (CCR)
+ */
+#define IFC_CCR_MASK			0x0F0F8800
+/* Clock division ratio */
+#define IFC_CCR_CLK_DIV_MASK		0x0F000000
+#define IFC_CCR_CLK_DIV_SHIFT		24
+#define IFC_CCR_CLK_DIV(n)		((n-1) << IFC_CCR_CLK_DIV_SHIFT)
+/* IFC Clock Delay */
+#define IFC_CCR_CLK_DLY_MASK		0x000F0000
+#define IFC_CCR_CLK_DLY_SHIFT		16
+#define IFC_CCR_CLK_DLY(n)		((n) << IFC_CCR_CLK_DLY_SHIFT)
+/* Invert IFC clock before sending out */
+#define IFC_CCR_INV_CLK_EN		0x00008000
+/* Fedback IFC Clock */
+#define IFC_CCR_FB_IFC_CLK_SEL		0x00000800
+
+/*
+ * Clock Status Register (CSR)
+ */
+/* Clk is stable */
+#define IFC_CSR_CLK_STAT_STABLE		0x80000000
+
+/*
+ * IFC_NAND Machine Specific Registers
+ */
+/*
+ * NAND Configuration Register (NCFGR)
+ */
+/* Auto Boot Mode */
+#define IFC_NAND_NCFGR_BOOT		0x80000000
+/* Addressing Mode-ROW0+n/COL0 */
+#define IFC_NAND_NCFGR_ADDR_MODE_RC0	0x00000000
+/* Addressing Mode-ROW0+n/COL0+n */
+#define IFC_NAND_NCFGR_ADDR_MODE_RC1	0x00400000
+/* Number of loop iterations of FIR sequences for multi page operations */
+#define IFC_NAND_NCFGR_NUM_LOOP_MASK	0x0000F000
+#define IFC_NAND_NCFGR_NUM_LOOP_SHIFT	12
+#define IFC_NAND_NCFGR_NUM_LOOP(n)	((n) << IFC_NAND_NCFGR_NUM_LOOP_SHIFT)
+/* Number of wait cycles */
+#define IFC_NAND_NCFGR_NUM_WAIT_MASK	0x000000FF
+#define IFC_NAND_NCFGR_NUM_WAIT_SHIFT	0
+
+/*
+ * NAND Flash Command Registers (NAND_FCR0/NAND_FCR1)
+ */
+/* General purpose FCM flash command bytes CMD0-CMD7 */
+#define IFC_NAND_FCR0_CMD0		0xFF000000
+#define IFC_NAND_FCR0_CMD0_SHIFT	24
+#define IFC_NAND_FCR0_CMD1		0x00FF0000
+#define IFC_NAND_FCR0_CMD1_SHIFT	16
+#define IFC_NAND_FCR0_CMD2		0x0000FF00
+#define IFC_NAND_FCR0_CMD2_SHIFT	8
+#define IFC_NAND_FCR0_CMD3		0x000000FF
+#define IFC_NAND_FCR0_CMD3_SHIFT	0
+#define IFC_NAND_FCR1_CMD4		0xFF000000
+#define IFC_NAND_FCR1_CMD4_SHIFT	24
+#define IFC_NAND_FCR1_CMD5		0x00FF0000
+#define IFC_NAND_FCR1_CMD5_SHIFT	16
+#define IFC_NAND_FCR1_CMD6		0x0000FF00
+#define IFC_NAND_FCR1_CMD6_SHIFT	8
+#define IFC_NAND_FCR1_CMD7		0x000000FF
+#define IFC_NAND_FCR1_CMD7_SHIFT	0
+
+/*
+ * Flash ROW and COL Address Register (ROWn, COLn)
+ */
+/* Main/spare region locator */
+#define IFC_NAND_COL_MS			0x80000000
+/* Column Address */
+#define IFC_NAND_COL_CA_MASK		0x00000FFF
+
+/*
+ * NAND Flash Byte Count Register (NAND_BC)
+ */
+/* Byte Count for read/Write */
+#define IFC_NAND_BC			0x000001FF
+
+/*
+ * NAND Flash Instruction Registers (NAND_FIR0/NAND_FIR1/NAND_FIR2)
+ */
+/* NAND Machine specific opcodes OP0-OP14*/
+#define IFC_NAND_FIR0_OP0		0xFC000000
+#define IFC_NAND_FIR0_OP0_SHIFT		26
+#define IFC_NAND_FIR0_OP1		0x03F00000
+#define IFC_NAND_FIR0_OP1_SHIFT		20
+#define IFC_NAND_FIR0_OP2		0x000FC000
+#define IFC_NAND_FIR0_OP2_SHIFT		14
+#define IFC_NAND_FIR0_OP3		0x00003F00
+#define IFC_NAND_FIR0_OP3_SHIFT		8
+#define IFC_NAND_FIR0_OP4		0x000000FC
+#define IFC_NAND_FIR0_OP4_SHIFT		2
+#define IFC_NAND_FIR1_OP5		0xFC000000
+#define IFC_NAND_FIR1_OP5_SHIFT		26
+#define IFC_NAND_FIR1_OP6		0x03F00000
+#define IFC_NAND_FIR1_OP6_SHIFT		20
+#define IFC_NAND_FIR1_OP7		0x000FC000
+#define IFC_NAND_FIR1_OP7_SHIFT		14
+#define IFC_NAND_FIR1_OP8		0x00003F00
+#define IFC_NAND_FIR1_OP8_SHIFT		8
+#define IFC_NAND_FIR1_OP9		0x000000FC
+#define IFC_NAND_FIR1_OP9_SHIFT		2
+#define IFC_NAND_FIR2_OP10		0xFC000000
+#define IFC_NAND_FIR2_OP10_SHIFT	26
+#define IFC_NAND_FIR2_OP11		0x03F00000
+#define IFC_NAND_FIR2_OP11_SHIFT	20
+#define IFC_NAND_FIR2_OP12		0x000FC000
+#define IFC_NAND_FIR2_OP12_SHIFT	14
+#define IFC_NAND_FIR2_OP13		0x00003F00
+#define IFC_NAND_FIR2_OP13_SHIFT	8
+#define IFC_NAND_FIR2_OP14		0x000000FC
+#define IFC_NAND_FIR2_OP14_SHIFT	2
+
+/*
+ * Instruction opcodes to be programmed
+ * in FIR registers- 6bits
+ */
+enum ifc_nand_fir_opcodes {
+	IFC_FIR_OP_NOP,
+	IFC_FIR_OP_CA0,
+	IFC_FIR_OP_CA1,
+	IFC_FIR_OP_CA2,
+	IFC_FIR_OP_CA3,
+	IFC_FIR_OP_RA0,
+	IFC_FIR_OP_RA1,
+	IFC_FIR_OP_RA2,
+	IFC_FIR_OP_RA3,
+	IFC_FIR_OP_CMD0,
+	IFC_FIR_OP_CMD1,
+	IFC_FIR_OP_CMD2,
+	IFC_FIR_OP_CMD3,
+	IFC_FIR_OP_CMD4,
+	IFC_FIR_OP_CMD5,
+	IFC_FIR_OP_CMD6,
+	IFC_FIR_OP_CMD7,
+	IFC_FIR_OP_CW0,
+	IFC_FIR_OP_CW1,
+	IFC_FIR_OP_CW2,
+	IFC_FIR_OP_CW3,
+	IFC_FIR_OP_CW4,
+	IFC_FIR_OP_CW5,
+	IFC_FIR_OP_CW6,
+	IFC_FIR_OP_CW7,
+	IFC_FIR_OP_WBCD,
+	IFC_FIR_OP_RBCD,
+	IFC_FIR_OP_BTRD,
+	IFC_FIR_OP_RDSTAT,
+	IFC_FIR_OP_NWAIT,
+	IFC_FIR_OP_WFR,
+	IFC_FIR_OP_SBRD,
+	IFC_FIR_OP_UA,
+	IFC_FIR_OP_RB,
+};
+
+/*
+ * NAND Chip Select Register (NAND_CSEL)
+ */
+#define IFC_NAND_CSEL			0x0C000000
+#define IFC_NAND_CSEL_SHIFT		26
+#define IFC_NAND_CSEL_CS0		0x00000000
+#define IFC_NAND_CSEL_CS1		0x04000000
+#define IFC_NAND_CSEL_CS2		0x08000000
+#define IFC_NAND_CSEL_CS3		0x0C000000
+
+/*
+ * NAND Operation Sequence Start (NANDSEQ_STRT)
+ */
+/* NAND Flash Operation Start */
+#define IFC_NAND_SEQ_STRT_FIR_STRT	0x80000000
+/* Automatic Erase */
+#define IFC_NAND_SEQ_STRT_AUTO_ERS	0x00800000
+/* Automatic Program */
+#define IFC_NAND_SEQ_STRT_AUTO_PGM	0x00100000
+/* Automatic Copyback */
+#define IFC_NAND_SEQ_STRT_AUTO_CPB	0x00020000
+/* Automatic Read Operation */
+#define IFC_NAND_SEQ_STRT_AUTO_RD	0x00004000
+/* Automatic Status Read */
+#define IFC_NAND_SEQ_STRT_AUTO_STAT_RD	0x00000800
+
+/*
+ * NAND Event and Error Status Register (NAND_EVTER_STAT)
+ */
+/* Operation Complete */
+#define IFC_NAND_EVTER_STAT_OPC		0x80000000
+/* Flash Timeout Error */
+#define IFC_NAND_EVTER_STAT_FTOER	0x08000000
+/* Write Protect Error */
+#define IFC_NAND_EVTER_STAT_WPER	0x04000000
+/* ECC Error */
+#define IFC_NAND_EVTER_STAT_ECCER	0x02000000
+/* RCW Load Done */
+#define IFC_NAND_EVTER_STAT_RCW_DN	0x00008000
+/* Boot Loadr Done */
+#define IFC_NAND_EVTER_STAT_BOOT_DN	0x00004000
+/* Bad Block Indicator search select */
+#define IFC_NAND_EVTER_STAT_BBI_SRCH_SE	0x00000800
+
+/*
+ * NAND Flash Page Read Completion Event Status Register
+ * (PGRDCMPL_EVT_STAT)
+ */
+#define PGRDCMPL_EVT_STAT_MASK		0xFFFF0000
+/* Small Page 0-15 Done */
+#define PGRDCMPL_EVT_STAT_SECTION_SP(n)	(1 << (31 - (n)))
+/* Large Page(2K) 0-3 Done */
+#define PGRDCMPL_EVT_STAT_LP_2K(n)	(0xF << (28 - (n)*4))
+/* Large Page(4K) 0-1 Done */
+#define PGRDCMPL_EVT_STAT_LP_4K(n)	(0xFF << (24 - (n)*8))
+
+/*
+ * NAND Event and Error Enable Register (NAND_EVTER_EN)
+ */
+/* Operation complete event enable */
+#define IFC_NAND_EVTER_EN_OPC_EN	0x80000000
+/* Page read complete event enable */
+#define IFC_NAND_EVTER_EN_PGRDCMPL_EN	0x20000000
+/* Flash Timeout error enable */
+#define IFC_NAND_EVTER_EN_FTOER_EN	0x08000000
+/* Write Protect error enable */
+#define IFC_NAND_EVTER_EN_WPER_EN	0x04000000
+/* ECC error logging enable */
+#define IFC_NAND_EVTER_EN_ECCER_EN	0x02000000
+
+/*
+ * NAND Event and Error Interrupt Enable Register (NAND_EVTER_INTR_EN)
+ */
+/* Enable interrupt for operation complete */
+#define IFC_NAND_EVTER_INTR_OPCIR_EN		0x80000000
+/* Enable interrupt for Page read complete */
+#define IFC_NAND_EVTER_INTR_PGRDCMPLIR_EN	0x20000000
+/* Enable interrupt for Flash timeout error */
+#define IFC_NAND_EVTER_INTR_FTOERIR_EN		0x08000000
+/* Enable interrupt for Write protect error */
+#define IFC_NAND_EVTER_INTR_WPERIR_EN		0x04000000
+/* Enable interrupt for ECC error*/
+#define IFC_NAND_EVTER_INTR_ECCERIR_EN		0x02000000
+
+/*
+ * NAND Transfer Error Attribute Register-0 (NAND_ERATTR0)
+ */
+#define IFC_NAND_ERATTR0_MASK		0x0C080000
+/* Error on CS0-3 for NAND */
+#define IFC_NAND_ERATTR0_ERCS_CS0	0x00000000
+#define IFC_NAND_ERATTR0_ERCS_CS1	0x04000000
+#define IFC_NAND_ERATTR0_ERCS_CS2	0x08000000
+#define IFC_NAND_ERATTR0_ERCS_CS3	0x0C000000
+/* Transaction type of error Read/Write */
+#define IFC_NAND_ERATTR0_ERTTYPE_READ	0x00080000
+
+/*
+ * NAND Flash Status Register (NAND_FSR)
+ */
+/* First byte of data read from read status op */
+#define IFC_NAND_NFSR_RS0		0xFF000000
+/* Second byte of data read from read status op */
+#define IFC_NAND_NFSR_RS1		0x00FF0000
+
+/*
+ * ECC Error Status Registers (ECCSTAT0-ECCSTAT3)
+ */
+/* Number of ECC errors on sector n (n = 0-15) */
+#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR0_MASK	0x0F000000
+#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR0_SHIFT	24
+#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR1_MASK	0x000F0000
+#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR1_SHIFT	16
+#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR2_MASK	0x00000F00
+#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR2_SHIFT	8
+#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR3_MASK	0x0000000F
+#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR3_SHIFT	0
+#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR4_MASK	0x0F000000
+#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR4_SHIFT	24
+#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR5_MASK	0x000F0000
+#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR5_SHIFT	16
+#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR6_MASK	0x00000F00
+#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR6_SHIFT	8
+#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR7_MASK	0x0000000F
+#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR7_SHIFT	0
+#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR8_MASK	0x0F000000
+#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR8_SHIFT	24
+#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR9_MASK	0x000F0000
+#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR9_SHIFT	16
+#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR10_MASK	0x00000F00
+#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR10_SHIFT	8
+#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR11_MASK	0x0000000F
+#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR11_SHIFT	0
+#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR12_MASK	0x0F000000
+#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR12_SHIFT	24
+#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR13_MASK	0x000F0000
+#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR13_SHIFT	16
+#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR14_MASK	0x00000F00
+#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR14_SHIFT	8
+#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR15_MASK	0x0000000F
+#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR15_SHIFT	0
+
+/*
+ * NAND Control Register (NANDCR)
+ */
+#define IFC_NAND_NCR_FTOCNT_MASK	0x1E000000
+#define IFC_NAND_NCR_FTOCNT_SHIFT	25
+#define IFC_NAND_NCR_FTOCNT(n)	((_ilog2(n) - 8)  << IFC_NAND_NCR_FTOCNT_SHIFT)
+
+/*
+ * NAND_AUTOBOOT_TRGR
+ */
+/* Trigger RCW load */
+#define IFC_NAND_AUTOBOOT_TRGR_RCW_LD	0x80000000
+/* Trigget Auto Boot */
+#define IFC_NAND_AUTOBOOT_TRGR_BOOT_LD	0x20000000
+
+/*
+ * NAND_MDR
+ */
+/* 1st read data byte when opcode SBRD */
+#define IFC_NAND_MDR_RDATA0		0xFF000000
+/* 2nd read data byte when opcode SBRD */
+#define IFC_NAND_MDR_RDATA1		0x00FF0000
+
+/*
+ * NOR Machine Specific Registers
+ */
+/*
+ * NOR Event and Error Status Register (NOR_EVTER_STAT)
+ */
+/* NOR Command Sequence Operation Complete */
+#define IFC_NOR_EVTER_STAT_OPC_NOR	0x80000000
+/* Write Protect Error */
+#define IFC_NOR_EVTER_STAT_WPER		0x04000000
+/* Command Sequence Timeout Error */
+#define IFC_NOR_EVTER_STAT_STOER	0x01000000
+
+/*
+ * NOR Event and Error Enable Register (NOR_EVTER_EN)
+ */
+/* NOR Command Seq complete event enable */
+#define IFC_NOR_EVTER_EN_OPCEN_NOR	0x80000000
+/* Write Protect Error Checking Enable */
+#define IFC_NOR_EVTER_EN_WPEREN		0x04000000
+/* Timeout Error Enable */
+#define IFC_NOR_EVTER_EN_STOEREN	0x01000000
+
+/*
+ * NOR Event and Error Interrupt Enable Register (NOR_EVTER_INTR_EN)
+ */
+/* Enable interrupt for OPC complete */
+#define IFC_NOR_EVTER_INTR_OPCEN_NOR	0x80000000
+/* Enable interrupt for write protect error */
+#define IFC_NOR_EVTER_INTR_WPEREN	0x04000000
+/* Enable interrupt for timeout error */
+#define IFC_NOR_EVTER_INTR_STOEREN	0x01000000
+
+/*
+ * NOR Transfer Error Attribute Register-0 (NOR_ERATTR0)
+ */
+/* Source ID for error transaction */
+#define IFC_NOR_ERATTR0_ERSRCID		0xFF000000
+/* AXI ID for error transation */
+#define IFC_NOR_ERATTR0_ERAID		0x000FF000
+/* Chip select corresponds to NOR error */
+#define IFC_NOR_ERATTR0_ERCS_CS0	0x00000000
+#define IFC_NOR_ERATTR0_ERCS_CS1	0x00000010
+#define IFC_NOR_ERATTR0_ERCS_CS2	0x00000020
+#define IFC_NOR_ERATTR0_ERCS_CS3	0x00000030
+/* Type of transaction read/write */
+#define IFC_NOR_ERATTR0_ERTYPE_READ	0x00000001
+
+/*
+ * NOR Transfer Error Attribute Register-2 (NOR_ERATTR2)
+ */
+#define IFC_NOR_ERATTR2_ER_NUM_PHASE_EXP	0x000F0000
+#define IFC_NOR_ERATTR2_ER_NUM_PHASE_PER	0x00000F00
+
+/*
+ * NOR Control Register (NORCR)
+ */
+#define IFC_NORCR_MASK			0x0F0F0000
+/* No. of Address/Data Phase */
+#define IFC_NORCR_NUM_PHASE_MASK	0x0F000000
+#define IFC_NORCR_NUM_PHASE_SHIFT	24
+#define IFC_NORCR_NUM_PHASE(n)	((n-1) << IFC_NORCR_NUM_PHASE_SHIFT)
+/* Sequence Timeout Count */
+#define IFC_NORCR_STOCNT_MASK		0x000F0000
+#define IFC_NORCR_STOCNT_SHIFT		16
+#define IFC_NORCR_STOCNT(n)	((__ilog2(n) - 8) << IFC_NORCR_STOCNT_SHIFT)
+
+/*
+ * GPCM Machine specific registers
+ */
+/*
+ * GPCM Event and Error Status Register (GPCM_EVTER_STAT)
+ */
+/* Timeout error */
+#define IFC_GPCM_EVTER_STAT_TOER	0x04000000
+/* Parity error */
+#define IFC_GPCM_EVTER_STAT_PER		0x01000000
+
+/*
+ * GPCM Event and Error Enable Register (GPCM_EVTER_EN)
+ */
+/* Timeout error enable */
+#define IFC_GPCM_EVTER_EN_TOER_EN	0x04000000
+/* Parity error enable */
+#define IFC_GPCM_EVTER_EN_PER_EN	0x01000000
+
+/*
+ * GPCM Event and Error Interrupt Enable Register (GPCM_EVTER_INTR_EN)
+ */
+/* Enable Interrupt for timeout error */
+#define IFC_GPCM_EEIER_TOERIR_EN	0x04000000
+/* Enable Interrupt for Parity error */
+#define IFC_GPCM_EEIER_PERIR_EN		0x01000000
+
+/*
+ * GPCM Transfer Error Attribute Register-0 (GPCM_ERATTR0)
+ */
+/* Source ID for error transaction */
+#define IFC_GPCM_ERATTR0_ERSRCID	0xFF000000
+/* AXI ID for error transaction */
+#define IFC_GPCM_ERATTR0_ERAID		0x000FF000
+/* Chip select corresponds to GPCM error */
+#define IFC_GPCM_ERATTR0_ERCS_CS0	0x00000000
+#define IFC_GPCM_ERATTR0_ERCS_CS1	0x00000040
+#define IFC_GPCM_ERATTR0_ERCS_CS2	0x00000080
+#define IFC_GPCM_ERATTR0_ERCS_CS3	0x000000C0
+/* Type of transaction read/Write */
+#define IFC_GPCM_ERATTR0_ERTYPE_READ	0x00000001
+
+/*
+ * GPCM Transfer Error Attribute Register-2 (GPCM_ERATTR2)
+ */
+/* On which beat of address/data parity error is observed */
+#define IFC_GPCM_ERATTR2_PERR_BEAT		0x00000C00
+/* Parity Error on byte */
+#define IFC_GPCM_ERATTR2_PERR_BYTE		0x000000F0
+/* Parity Error reported in addr or data phase */
+#define IFC_GPCM_ERATTR2_PERR_DATA_PHASE	0x00000001
+
+/*
+ * GPCM Status Register (GPCM_STAT)
+ */
+#define IFC_GPCM_STAT_BSY		0x80000000  /* GPCM is busy */
+
+/*
+ * IFC Controller NAND Machine registers
+ */
+struct fsl_ifc_nand {
+	__be32 ncfgr;
+	u32 res1[0x4];
+	__be32 nand_fcr0;
+	__be32 nand_fcr1;
+	u32 res2[0x8];
+	__be32 row0;
+	u32 res3;
+	__be32 col0;
+	u32 res4;
+	__be32 row1;
+	u32 res5;
+	__be32 col1;
+	u32 res6;
+	__be32 row2;
+	u32 res7;
+	__be32 col2;
+	u32 res8;
+	__be32 row3;
+	u32 res9;
+	__be32 col3;
+	u32 res10[0x24];
+	__be32 nand_fbcr;
+	u32 res11;
+	__be32 nand_fir0;
+	__be32 nand_fir1;
+	__be32 nand_fir2;
+	u32 res12[0x10];
+	__be32 nand_csel;
+	u32 res13;
+	__be32 nandseq_strt;
+	u32 res14;
+	__be32 nand_evter_stat;
+	u32 res15;
+	__be32 pgrdcmpl_evt_stat;
+	u32 res16[0x2];
+	__be32 nand_evter_en;
+	u32 res17[0x2];
+	__be32 nand_evter_intr_en;
+	u32 res18[0x2];
+	__be32 nand_erattr0;
+	__be32 nand_erattr1;
+	u32 res19[0x10];
+	__be32 nand_fsr;
+	u32 res20;
+	__be32 nand_eccstat[4];
+	u32 res21[0x20];
+	__be32 nanndcr;
+	u32 res22[0x2];
+	__be32 nand_autoboot_trgr;
+	u32 res23;
+	__be32 nand_mdr;
+	u32 res24[0x5C];
+};
+
+/*
+ * IFC controller NOR Machine registers
+ */
+struct fsl_ifc_nor {
+	__be32 nor_evter_stat;
+	u32 res1[0x2];
+	__be32 nor_evter_en;
+	u32 res2[0x2];
+	__be32 nor_evter_intr_en;
+	u32 res3[0x2];
+	__be32 nor_erattr0;
+	__be32 nor_erattr1;
+	__be32 nor_erattr2;
+	u32 res4[0x4];
+	__be32 norcr;
+	u32 res5[0xEF];
+};
+
+/*
+ * IFC controller GPCM Machine registers
+ */
+struct fsl_ifc_gpcm {
+	__be32 gpcm_evter_stat;
+	u32 res1[0x2];
+	__be32 gpcm_evter_en;
+	u32 res2[0x2];
+	__be32 gpcm_evter_intr_en;
+	u32 res3[0x2];
+	__be32 gpcm_erattr0;
+	__be32 gpcm_erattr1;
+	__be32 gpcm_erattr2;
+	__be32 gpcm_stat;
+	u32 res4[0x1F3];
+};
+
+/*
+ * IFC Controller Registers
+ */
+struct fsl_ifc_regs {
+	__be32 ifc_rev;
+	u32 res1[0x3];
+	struct {
+		__be32 cspr;
+		u32 res2[0x2];
+	} cspr_cs[FSL_IFC_BANK_COUNT];
+	u32 res3[0x18];
+	struct {
+		__be32 amask;
+		u32 res4[0x2];
+	} amask_cs[FSL_IFC_BANK_COUNT];
+	u32 res5[0x18];
+	struct {
+		__be32 csor;
+		u32 res6[0x2];
+	} csor_cs[FSL_IFC_BANK_COUNT];
+	u32 res7[0x18];
+	struct {
+		__be32 ftim[4];
+		u32 res8[0x8];
+	} ftim_cs[FSL_IFC_BANK_COUNT];
+	u32 res9[0x60];
+	__be32 rb_stat;
+	u32 res10[0x2];
+	__be32 ifc_gcr;
+	u32 res11[0x2];
+	__be32 cm_evter_stat;
+	u32 res12[0x2];
+	__be32 cm_evter_en;
+	u32 res13[0x2];
+	__be32 cm_evter_intr_en;
+	u32 res14[0x2];
+	__be32 cm_erattr0;
+	__be32 cm_erattr1;
+	u32 res15[0x2];
+	__be32 ifc_ccr;
+	__be32 ifc_csr;
+	u32 res16[0x2EB];
+	struct fsl_ifc_nand ifc_nand;
+	struct fsl_ifc_nor ifc_nor;
+	struct fsl_ifc_gpcm ifc_gpcm;
+};
+
+extern unsigned int convert_ifc_address(phys_addr_t addr_base);
+extern int fsl_ifc_find(phys_addr_t addr_base);
+
+/* overview of the fsl ifc controller */
+
+struct fsl_ifc_ctrl {
+	/* device info */
+	struct device			*dev;
+	struct fsl_ifc_regs __iomem	*regs;
+	int				irq;
+	int				nand_irq;
+	spinlock_t			lock;
+	void				*nand;
+
+	u32 nand_stat;
+	wait_queue_head_t nand_wait;
+};
+
+extern struct fsl_ifc_ctrl *fsl_ifc_ctrl_dev;
+
+
+#endif /* __ASM_FSL_IFC_H */
diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h
index 8a0b5ec..420b453 100644
--- a/arch/powerpc/include/asm/fsl_lbc.h
+++ b/arch/powerpc/include/asm/fsl_lbc.h
@@ -238,8 +238,6 @@ struct fsl_lbc_regs {
 #define FPAR_LP_CI_SHIFT      0
 	__be32 fbcr;            /**< Flash Byte Count Register */
 #define FBCR_BC      0x00000FFF
-	u8 res11[0x8];
-	u8 res8[0xF00];
 };
 
 /*
@@ -294,6 +292,11 @@ struct fsl_lbc_ctrl {
 
 	/* status read from LTESR by irq handler */
 	unsigned int			irq_status;
+
+#ifdef CONFIG_SUSPEND
+	/* save regs when system go to deep-sleep */
+	struct fsl_lbc_regs		*saved_regs;
+#endif
 };
 
 extern int fsl_upm_run_pattern(struct fsl_upm *upm, void __iomem *io_base,
diff --git a/arch/powerpc/include/asm/hugetlb.h b/arch/powerpc/include/asm/hugetlb.h
index 8600493..dfdb95b 100644
--- a/arch/powerpc/include/asm/hugetlb.h
+++ b/arch/powerpc/include/asm/hugetlb.h
@@ -5,7 +5,6 @@
 #include <asm/page.h>
 
 extern struct kmem_cache *hugepte_cache;
-extern void __init reserve_hugetlb_gpages(void);
 
 static inline pte_t *hugepd_page(hugepd_t hpd)
 {
@@ -22,14 +21,14 @@ static inline pte_t *hugepte_offset(hugepd_t *hpdp, unsigned long addr,
 				    unsigned pdshift)
 {
 	/*
-	 * On 32-bit, we have multiple higher-level table entries that point to
-	 * the same hugepte.  Just use the first one since they're all
+	 * On FSL BookE, we have multiple higher-level table entries that
+	 * point to the same hugepte.  Just use the first one since they're all
 	 * identical.  So for that case, idx=0.
 	 */
 	unsigned long idx = 0;
 
 	pte_t *dir = hugepd_page(*hpdp);
-#ifdef CONFIG_PPC64
+#ifndef CONFIG_PPC_FSL_BOOK3E
 	idx = (addr & ((1UL << pdshift) - 1)) >> hugepd_shift(*hpdp);
 #endif
 
@@ -53,7 +52,8 @@ static inline int is_hugepage_only_range(struct mm_struct *mm,
 }
 #endif
 
-void book3e_hugetlb_preload(struct mm_struct *mm, unsigned long ea, pte_t pte);
+void book3e_hugetlb_preload(struct vm_area_struct *vma, unsigned long ea,
+			    pte_t pte);
 void flush_hugetlb_page(struct vm_area_struct *vma, unsigned long vmaddr);
 
 void hugetlb_free_pgd_range(struct mmu_gather *tlb, unsigned long addr,
@@ -124,7 +124,17 @@ static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma,
 					     unsigned long addr, pte_t *ptep,
 					     pte_t pte, int dirty)
 {
+#ifdef HUGETLB_NEED_PRELOAD
+	/*
+	 * The "return 1" forces a call of update_mmu_cache, which will write a
+	 * TLB entry.  Without this, platforms that don't do a write of the TLB
+	 * entry in the TLB miss handler asm will fault ad infinitum.
+	 */
+	ptep_set_access_flags(vma, addr, ptep, pte, dirty);
+	return 1;
+#else
 	return ptep_set_access_flags(vma, addr, ptep, pte, dirty);
+#endif
 }
 
 static inline pte_t huge_ptep_get(pte_t *ptep)
@@ -142,14 +152,24 @@ static inline void arch_release_hugepage(struct page *page)
 }
 
 #else /* ! CONFIG_HUGETLB_PAGE */
-static inline void reserve_hugetlb_gpages(void)
-{
-	pr_err("Cannot reserve gpages without hugetlb enabled\n");
-}
 static inline void flush_hugetlb_page(struct vm_area_struct *vma,
 				      unsigned long vmaddr)
 {
 }
+#endif /* CONFIG_HUGETLB_PAGE */
+
+
+/*
+ * FSL Book3E platforms require special gpage handling - the gpages
+ * are reserved early in the boot process by memblock instead of via
+ * the .dts as on IBM platforms.
+ */
+#if defined(CONFIG_HUGETLB_PAGE) && defined(CONFIG_PPC_FSL_BOOK3E)
+extern void __init reserve_hugetlb_gpages(void);
+#else
+static inline void reserve_hugetlb_gpages(void)
+{
+}
 #endif
 
 #endif /* _ASM_POWERPC_HUGETLB_H */
diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h
index 45698d5..a3855b8 100644
--- a/arch/powerpc/include/asm/io.h
+++ b/arch/powerpc/include/asm/io.h
@@ -394,7 +394,7 @@ __do_out_asm(_rec_outl, "stwbrx")
 #endif /* CONFIG_PPC32 */
 
 /* The "__do_*" operations below provide the actual "base" implementation
- * for each of the defined acccessor. Some of them use the out_* functions
+ * for each of the defined accessors. Some of them use the out_* functions
  * directly, some of them still use EEH, though we might change that in the
  * future. Those macros below provide the necessary argument swapping and
  * handling of the IO base for PIO.
diff --git a/arch/powerpc/include/asm/kdump.h b/arch/powerpc/include/asm/kdump.h
index bffd062..c977620 100644
--- a/arch/powerpc/include/asm/kdump.h
+++ b/arch/powerpc/include/asm/kdump.h
@@ -32,11 +32,11 @@
 
 #ifndef __ASSEMBLY__
 
-#if defined(CONFIG_CRASH_DUMP) && !defined(CONFIG_RELOCATABLE)
+#if defined(CONFIG_CRASH_DUMP) && !defined(CONFIG_NONSTATIC_KERNEL)
 extern void reserve_kdump_trampoline(void);
 extern void setup_kdump_trampoline(void);
 #else
-/* !CRASH_DUMP || RELOCATABLE */
+/* !CRASH_DUMP || !NONSTATIC_KERNEL */
 static inline void reserve_kdump_trampoline(void) { ; }
 static inline void setup_kdump_trampoline(void) { ; }
 #endif
diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h
index f921eb1..16d7e33 100644
--- a/arch/powerpc/include/asm/kexec.h
+++ b/arch/powerpc/include/asm/kexec.h
@@ -49,7 +49,6 @@
 #define KEXEC_STATE_REAL_MODE 2
 
 #ifndef __ASSEMBLY__
-#include <linux/cpumask.h>
 #include <asm/reg.h>
 
 typedef void (*crash_shutdown_t)(void);
@@ -73,11 +72,6 @@ extern void kexec_smp_wait(void);	/* get and clear naca physid, wait for
 					  master to copy new code to 0 */
 extern int crashing_cpu;
 extern void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *));
-extern cpumask_t cpus_in_sr;
-static inline int kexec_sr_activated(int cpu)
-{
-	return cpumask_test_cpu(cpu, &cpus_in_sr);
-}
 
 struct kimage;
 struct pt_regs;
@@ -94,7 +88,6 @@ extern void reserve_crashkernel(void);
 extern void machine_kexec_mask_interrupts(void);
 
 #else /* !CONFIG_KEXEC */
-static inline int kexec_sr_activated(int cpu) { return 0; }
 static inline void crash_kexec_secondary(struct pt_regs *regs) { }
 
 static inline int overlaps_crashkernel(unsigned long start, unsigned long size)
diff --git a/arch/powerpc/include/asm/keylargo.h b/arch/powerpc/include/asm/keylargo.h
index d8520ef..fc195d0 100644
--- a/arch/powerpc/include/asm/keylargo.h
+++ b/arch/powerpc/include/asm/keylargo.h
@@ -51,7 +51,7 @@
 
 #define KL_GPIO_SOUND_POWER		(KEYLARGO_GPIO_0+0x05)
 
-/* Hrm... this one is only to be used on Pismo. It seeem to also
+/* Hrm... this one is only to be used on Pismo. It seems to also
  * control the timebase enable on other machines. Still to be
  * experimented... --BenH.
  */
diff --git a/arch/powerpc/include/asm/kvm_book3s.h b/arch/powerpc/include/asm/kvm_book3s.h
index d4df013..69c7377 100644
--- a/arch/powerpc/include/asm/kvm_book3s.h
+++ b/arch/powerpc/include/asm/kvm_book3s.h
@@ -381,39 +381,6 @@ static inline bool kvmppc_critical_section(struct kvm_vcpu *vcpu)
 }
 #endif
 
-static inline unsigned long compute_tlbie_rb(unsigned long v, unsigned long r,
-					     unsigned long pte_index)
-{
-	unsigned long rb, va_low;
-
-	rb = (v & ~0x7fUL) << 16;		/* AVA field */
-	va_low = pte_index >> 3;
-	if (v & HPTE_V_SECONDARY)
-		va_low = ~va_low;
-	/* xor vsid from AVA */
-	if (!(v & HPTE_V_1TB_SEG))
-		va_low ^= v >> 12;
-	else
-		va_low ^= v >> 24;
-	va_low &= 0x7ff;
-	if (v & HPTE_V_LARGE) {
-		rb |= 1;			/* L field */
-		if (cpu_has_feature(CPU_FTR_ARCH_206) &&
-		    (r & 0xff000)) {
-			/* non-16MB large page, must be 64k */
-			/* (masks depend on page size) */
-			rb |= 0x1000;		/* page encoding in LP field */
-			rb |= (va_low & 0x7f) << 16; /* 7b of VA in AVA/LP field */
-			rb |= (va_low & 0xfe);	/* AVAL field (P7 doesn't seem to care) */
-		}
-	} else {
-		/* 4kB page */
-		rb |= (va_low & 0x7ff) << 12;	/* remaining 11b of VA */
-	}
-	rb |= (v >> 54) & 0x300;		/* B field */
-	return rb;
-}
-
 /* Magic register values loaded into r3 and r4 before the 'sc' assembly
  * instruction for the OSI hypercalls */
 #define OSI_SC_MAGIC_R3			0x113724FA
diff --git a/arch/powerpc/include/asm/kvm_book3s_64.h b/arch/powerpc/include/asm/kvm_book3s_64.h
index e43fe42..d0ac94f 100644
--- a/arch/powerpc/include/asm/kvm_book3s_64.h
+++ b/arch/powerpc/include/asm/kvm_book3s_64.h
@@ -29,4 +29,37 @@ static inline struct kvmppc_book3s_shadow_vcpu *to_svcpu(struct kvm_vcpu *vcpu)
 
 #define SPAPR_TCE_SHIFT		12
 
+static inline unsigned long compute_tlbie_rb(unsigned long v, unsigned long r,
+					     unsigned long pte_index)
+{
+	unsigned long rb, va_low;
+
+	rb = (v & ~0x7fUL) << 16;		/* AVA field */
+	va_low = pte_index >> 3;
+	if (v & HPTE_V_SECONDARY)
+		va_low = ~va_low;
+	/* xor vsid from AVA */
+	if (!(v & HPTE_V_1TB_SEG))
+		va_low ^= v >> 12;
+	else
+		va_low ^= v >> 24;
+	va_low &= 0x7ff;
+	if (v & HPTE_V_LARGE) {
+		rb |= 1;			/* L field */
+		if (cpu_has_feature(CPU_FTR_ARCH_206) &&
+		    (r & 0xff000)) {
+			/* non-16MB large page, must be 64k */
+			/* (masks depend on page size) */
+			rb |= 0x1000;		/* page encoding in LP field */
+			rb |= (va_low & 0x7f) << 16; /* 7b of VA in AVA/LP field */
+			rb |= (va_low & 0xfe);	/* AVAL field (P7 doesn't seem to care) */
+		}
+	} else {
+		/* 4kB page */
+		rb |= (va_low & 0x7ff) << 12;	/* remaining 11b of VA */
+	}
+	rb |= (v >> 54) & 0x300;		/* B field */
+	return rb;
+}
+
 #endif /* __ASM_KVM_BOOK3S_64_H__ */
diff --git a/arch/powerpc/include/asm/lv1call.h b/arch/powerpc/include/asm/lv1call.h
index f77c708..233f9ec 100644
--- a/arch/powerpc/include/asm/lv1call.h
+++ b/arch/powerpc/include/asm/lv1call.h
@@ -231,7 +231,7 @@ LV1_CALL(allocate_memory,                               4, 2,   0 )
 LV1_CALL(write_htab_entry,                              4, 0,   1 )
 LV1_CALL(construct_virtual_address_space,               3, 2,   2 )
 LV1_CALL(invalidate_htab_entries,                       5, 0,   3 )
-LV1_CALL(get_virtual_address_space_id_of_ppe,           1, 1,   4 )
+LV1_CALL(get_virtual_address_space_id_of_ppe,           0, 1,   4 )
 LV1_CALL(query_logical_partition_address_region_info,   1, 5,   6 )
 LV1_CALL(select_virtual_address_space,                  1, 0,   7 )
 LV1_CALL(pause,                                         1, 0,   9 )
@@ -264,7 +264,7 @@ LV1_CALL(configure_execution_time_variable,             1, 0,  77 )
 LV1_CALL(get_spe_irq_outlet,                            2, 1,  78 )
 LV1_CALL(set_spe_privilege_state_area_1_register,       3, 0,  79 )
 LV1_CALL(create_repository_node,                        6, 0,  90 )
-LV1_CALL(get_repository_node_value,                     5, 2,  91 )
+LV1_CALL(read_repository_node,                          5, 2,  91 )
 LV1_CALL(modify_repository_node_value,                  6, 0,  92 )
 LV1_CALL(remove_repository_node,                        4, 0,  93 )
 LV1_CALL(read_htab_entries,                             2, 5,  95 )
@@ -276,7 +276,7 @@ LV1_CALL(construct_io_irq_outlet,                       1, 1, 120 )
 LV1_CALL(destruct_io_irq_outlet,                        1, 0, 121 )
 LV1_CALL(map_htab,                                      1, 1, 122 )
 LV1_CALL(unmap_htab,                                    1, 0, 123 )
-LV1_CALL(get_version_info,                              0, 1, 127 )
+LV1_CALL(get_version_info,                              0, 2, 127 )
 LV1_CALL(insert_htab_entry,                             6, 3, 158 )
 LV1_CALL(read_virtual_uart,                             3, 1, 162 )
 LV1_CALL(write_virtual_uart,                            3, 1, 163 )
@@ -294,9 +294,9 @@ LV1_CALL(unmap_device_dma_region,                       4, 0, 177 )
 LV1_CALL(net_add_multicast_address,                     4, 0, 185 )
 LV1_CALL(net_remove_multicast_address,                  4, 0, 186 )
 LV1_CALL(net_start_tx_dma,                              4, 0, 187 )
-LV1_CALL(net_stop_tx_dma,                               3, 0, 188 )
+LV1_CALL(net_stop_tx_dma,                               2, 0, 188 )
 LV1_CALL(net_start_rx_dma,                              4, 0, 189 )
-LV1_CALL(net_stop_rx_dma,                               3, 0, 190 )
+LV1_CALL(net_stop_rx_dma,                               2, 0, 190 )
 LV1_CALL(net_set_interrupt_status_indicator,            4, 0, 191 )
 LV1_CALL(net_set_interrupt_mask,                        4, 0, 193 )
 LV1_CALL(net_control,                                   6, 2, 194 )
diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index b540d6f..bf37931d 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -213,6 +213,9 @@ struct machdep_calls {
 	 * allow assignment/enabling of the device. */
 	int  (*pcibios_enable_device_hook)(struct pci_dev *);
 
+	/* Called after scan and before resource survey */
+	void (*pcibios_fixup_phb)(struct pci_controller *hose);
+
 	/* Called to shutdown machine specific hardware not already controlled
 	 * by other drivers.
 	 */
diff --git a/arch/powerpc/include/asm/memblock.h b/arch/powerpc/include/asm/memblock.h
deleted file mode 100644
index 43efc34..0000000
--- a/arch/powerpc/include/asm/memblock.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _ASM_POWERPC_MEMBLOCK_H
-#define _ASM_POWERPC_MEMBLOCK_H
-
-#include <asm/udbg.h>
-
-#define MEMBLOCK_DBG(fmt...) udbg_printf(fmt)
-
-#endif /* _ASM_POWERPC_MEMBLOCK_H */
diff --git a/arch/powerpc/include/asm/mmu-book3e.h b/arch/powerpc/include/asm/mmu-book3e.h
index 0260ea5..f5f89ca 100644
--- a/arch/powerpc/include/asm/mmu-book3e.h
+++ b/arch/powerpc/include/asm/mmu-book3e.h
@@ -214,6 +214,10 @@ typedef struct {
 	unsigned int	id;
 	unsigned int	active;
 	unsigned long	vdso_base;
+#ifdef CONFIG_PPC_ICSWX
+	struct spinlock *cop_lockp;	/* guard cop related stuff */
+	unsigned long acop;		/* mask of enabled coprocessor types */
+#endif /* CONFIG_PPC_ICSWX */
 #ifdef CONFIG_PPC_MM_SLICES
 	u64 low_slices_psize;   /* SLB page size encodings */
 	u64 high_slices_psize;  /* 4 bits per slice for now */
@@ -254,6 +258,13 @@ extern int mmu_vmemmap_psize;
 
 #ifdef CONFIG_PPC64
 extern unsigned long linear_map_top;
+
+/*
+ * 64-bit booke platforms don't load the tlb in the tlb miss handler code.
+ * HUGETLB_NEED_PRELOAD handles this - it causes huge_ptep_set_access_flags to
+ * return 1, indicating that the tlb requires preloading.
+ */
+#define HUGETLB_NEED_PRELOAD
 #endif
 
 #endif /* !__ASSEMBLY__ */
diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h
index db645ec..412ba49 100644
--- a/arch/powerpc/include/asm/mmu-hash64.h
+++ b/arch/powerpc/include/asm/mmu-hash64.h
@@ -312,10 +312,9 @@ extern void slb_set_size(u16 size);
  * (i.e. everything above 0xC000000000000000), except the very top
  * segment, which simplifies several things.
  *
- * 	- We allow for 15 significant bits of ESID and 20 bits of
- * context for user addresses.  i.e. 8T (43 bits) of address space for
- * up to 1M contexts (although the page table structure and context
- * allocation will need changes to take advantage of this).
+ *	- We allow for 16 significant bits of ESID and 19 bits of
+ * context for user addresses.  i.e. 16T (44 bits) of address space for
+ * up to half a million contexts.
  *
  * 	- The scramble function gives robust scattering in the hash
  * table (at least based on some initial results).  The previous
diff --git a/arch/powerpc/include/asm/mpic.h b/arch/powerpc/include/asm/mpic.h
index e6fae49..67b4d98 100644
--- a/arch/powerpc/include/asm/mpic.h
+++ b/arch/powerpc/include/asm/mpic.h
@@ -251,6 +251,9 @@ struct mpic_irq_save {
 /* The instance data of a given MPIC */
 struct mpic
 {
+	/* The OpenFirmware dt node for this MPIC */
+	struct device_node *node;
+
 	/* The remapper for this MPIC */
 	struct irq_host		*irqhost;
 
@@ -293,6 +296,9 @@ struct mpic
 	/* Register access method */
 	enum mpic_reg_type	reg_type;
 
+	/* The physical base address of the MPIC */
+	phys_addr_t paddr;
+
 	/* The various ioremap'ed bases */
 	struct mpic_reg_bank	gregs;
 	struct mpic_reg_bank	tmregs;
@@ -331,11 +337,11 @@ struct mpic
  * Note setting any ID (leaving those bits to 0) means standard MPIC
  */
 
-/* This is the primary controller, only that one has IPIs and
- * has afinity control. A non-primary MPIC always uses CPU0
- * registers only
+/*
+ * This is a secondary ("chained") controller; it only uses the CPU0
+ * registers.  Primary controllers have IPIs and affinity control.
  */
-#define MPIC_PRIMARY			0x00000001
+#define MPIC_SECONDARY			0x00000001
 
 /* Set this for a big-endian MPIC */
 #define MPIC_BIG_ENDIAN			0x00000002
diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index 2893e8f..a4b28f1 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -109,6 +109,14 @@ extern int opal_enter_rtas(struct rtas_args *args,
 #define OPAL_PCI_MAP_PE_DMA_WINDOW		44
 #define OPAL_PCI_MAP_PE_DMA_WINDOW_REAL		45
 #define OPAL_PCI_RESET				49
+#define OPAL_PCI_GET_HUB_DIAG_DATA		50
+#define OPAL_PCI_GET_PHB_DIAG_DATA		51
+#define OPAL_PCI_FENCE_PHB			52
+#define OPAL_PCI_REINIT				53
+#define OPAL_PCI_MASK_PE_ERROR			54
+#define OPAL_SET_SLOT_LED_STATUS		55
+#define OPAL_GET_EPOW_STATUS			56
+#define OPAL_SET_SYSTEM_ATTENTION_LED		57
 
 #ifndef __ASSEMBLY__
 
@@ -169,7 +177,11 @@ enum OpalPendingState {
 	OPAL_EVENT_NVRAM = 0x2,
 	OPAL_EVENT_RTC = 0x4,
 	OPAL_EVENT_CONSOLE_OUTPUT = 0x8,
-	OPAL_EVENT_CONSOLE_INPUT = 0x10
+	OPAL_EVENT_CONSOLE_INPUT = 0x10,
+	OPAL_EVENT_ERROR_LOG_AVAIL = 0x20,
+	OPAL_EVENT_ERROR_LOG = 0x40,
+	OPAL_EVENT_EPOW = 0x80,
+	OPAL_EVENT_LED_STATUS = 0x100
 };
 
 /* Machine check related definitions */
@@ -258,13 +270,49 @@ enum OpalPeAction {
 	OPAL_MAP_PE = 1
 };
 
+enum OpalPeltvAction {
+	OPAL_REMOVE_PE_FROM_DOMAIN = 0,
+	OPAL_ADD_PE_TO_DOMAIN = 1
+};
+
+enum OpalMveEnableAction {
+	OPAL_DISABLE_MVE = 0,
+	OPAL_ENABLE_MVE = 1
+};
+
 enum OpalPciResetAndReinitScope {
 	OPAL_PHB_COMPLETE = 1, OPAL_PCI_LINK = 2, OPAL_PHB_ERROR = 3,
 	OPAL_PCI_HOT_RESET = 4, OPAL_PCI_FUNDAMENTAL_RESET = 5,
-	OPAL_PCI_IODA_RESET = 6,
+	OPAL_PCI_IODA_TABLE_RESET = 6,
+};
+
+enum OpalPciResetState {
+	OPAL_DEASSERT_RESET = 0,
+	OPAL_ASSERT_RESET = 1
 };
 
-enum OpalPciResetState { OPAL_DEASSERT_RESET = 0, OPAL_ASSERT_RESET = 1 };
+enum OpalPciMaskAction {
+	OPAL_UNMASK_ERROR_TYPE = 0,
+	OPAL_MASK_ERROR_TYPE = 1
+};
+
+enum OpalSlotLedType {
+	OPAL_SLOT_LED_ID_TYPE = 0,
+	OPAL_SLOT_LED_FAULT_TYPE = 1
+};
+
+enum OpalLedAction {
+	OPAL_TURN_OFF_LED = 0,
+	OPAL_TURN_ON_LED = 1,
+	OPAL_QUERY_LED_STATE_AFTER_BUSY = 2
+};
+
+enum OpalEpowStatus {
+	OPAL_EPOW_NONE = 0,
+	OPAL_EPOW_UPS = 1,
+	OPAL_EPOW_OVER_AMBIENT_TEMP = 2,
+	OPAL_EPOW_OVER_INTERNAL_TEMP = 3
+};
 
 struct opal_machine_check_event {
 	enum OpalMCE_Version	version:8;	/* 0x00 */
@@ -314,8 +362,74 @@ struct opal_machine_check_event {
 	} u;
 };
 
+/**
+ * This structure defines the overlay which will be used to store PHB error
+ * data upon request.
+ */
+enum {
+	OPAL_P7IOC_NUM_PEST_REGS = 128,
+};
+
+struct OpalIoP7IOCPhbErrorData {
+	uint32_t brdgCtl;
+
+	// P7IOC utl regs
+	uint32_t portStatusReg;
+	uint32_t rootCmplxStatus;
+	uint32_t busAgentStatus;
+
+	// P7IOC cfg regs
+	uint32_t deviceStatus;
+	uint32_t slotStatus;
+	uint32_t linkStatus;
+	uint32_t devCmdStatus;
+	uint32_t devSecStatus;
+
+	// cfg AER regs
+	uint32_t rootErrorStatus;
+	uint32_t uncorrErrorStatus;
+	uint32_t corrErrorStatus;
+	uint32_t tlpHdr1;
+	uint32_t tlpHdr2;
+	uint32_t tlpHdr3;
+	uint32_t tlpHdr4;
+	uint32_t sourceId;
+
+	uint32_t rsv3;
+
+	// Record data about the call to allocate a buffer.
+	uint64_t errorClass;
+	uint64_t correlator;
+
+	//P7IOC MMIO Error Regs
+	uint64_t p7iocPlssr;                // n120
+	uint64_t p7iocCsr;                  // n110
+	uint64_t lemFir;                    // nC00
+	uint64_t lemErrorMask;              // nC18
+	uint64_t lemWOF;                    // nC40
+	uint64_t phbErrorStatus;            // nC80
+	uint64_t phbFirstErrorStatus;       // nC88
+	uint64_t phbErrorLog0;              // nCC0
+	uint64_t phbErrorLog1;              // nCC8
+	uint64_t mmioErrorStatus;           // nD00
+	uint64_t mmioFirstErrorStatus;      // nD08
+	uint64_t mmioErrorLog0;             // nD40
+	uint64_t mmioErrorLog1;             // nD48
+	uint64_t dma0ErrorStatus;           // nD80
+	uint64_t dma0FirstErrorStatus;      // nD88
+	uint64_t dma0ErrorLog0;             // nDC0
+	uint64_t dma0ErrorLog1;             // nDC8
+	uint64_t dma1ErrorStatus;           // nE00
+	uint64_t dma1FirstErrorStatus;      // nE08
+	uint64_t dma1ErrorLog0;             // nE40
+	uint64_t dma1ErrorLog1;             // nE48
+	uint64_t pestA[OPAL_P7IOC_NUM_PEST_REGS];
+	uint64_t pestB[OPAL_P7IOC_NUM_PEST_REGS];
+};
+
 typedef struct oppanel_line {
-	/* XXX */
+	const char * 	line;
+	uint64_t 	line_len;
 } oppanel_line_t;
 
 /* API functions */
@@ -413,6 +527,15 @@ int64_t opal_pci_map_pe_dma_window_real(uint64_t phb_id, uint16_t pe_number,
 					uint64_t pci_mem_size);
 int64_t opal_pci_reset(uint64_t phb_id, uint8_t reset_scope, uint8_t assert_state);
 
+int64_t opal_pci_get_hub_diag_data(uint64_t hub_id, void *diag_buffer, uint64_t diag_buffer_len);
+int64_t opal_pci_get_phb_diag_data(uint64_t phb_id, void *diag_buffer, uint64_t diag_buffer_len);
+int64_t opal_pci_fence_phb(uint64_t phb_id);
+int64_t opal_pci_reinit(uint64_t phb_id, uint8_t reinit_scope);
+int64_t opal_pci_mask_pe_error(uint64_t phb_id, uint16_t pe_number, uint8_t error_type, uint8_t mask_action);
+int64_t opal_set_slot_led_status(uint64_t phb_id, uint64_t slot_id, uint8_t led_type, uint8_t led_action);
+int64_t opal_get_epow_status(uint64_t *status);
+int64_t opal_set_system_attention_led(uint8_t led_action);
+
 /* Internal functions */
 extern int early_init_dt_scan_opal(unsigned long node, const char *uname, int depth, void *data);
 
diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
index 17722c7..269c05a3 100644
--- a/arch/powerpc/include/asm/paca.h
+++ b/arch/powerpc/include/asm/paca.h
@@ -135,6 +135,7 @@ struct paca_struct {
 	u8 hard_enabled;		/* set if irqs are enabled in MSR */
 	u8 io_sync;			/* writel() needs spin_unlock sync */
 	u8 irq_work_pending;		/* IRQ_WORK interrupt while soft-disable */
+	u8 nap_state_lost;		/* NV GPR values lost in power7_idle */
 
 #ifdef CONFIG_PPC_POWERNV
 	/* Pointer to OPAL machine check event structure set by the
diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h
index dd9c4fd..f072e97 100644
--- a/arch/powerpc/include/asm/page.h
+++ b/arch/powerpc/include/asm/page.h
@@ -92,20 +92,34 @@ extern unsigned int HPAGE_SHIFT;
 #define PAGE_OFFSET	ASM_CONST(CONFIG_PAGE_OFFSET)
 #define LOAD_OFFSET	ASM_CONST((CONFIG_KERNEL_START-CONFIG_PHYSICAL_START))
 
-#if defined(CONFIG_RELOCATABLE)
+#if defined(CONFIG_NONSTATIC_KERNEL)
 #ifndef __ASSEMBLY__
 
 extern phys_addr_t memstart_addr;
 extern phys_addr_t kernstart_addr;
+
+#ifdef CONFIG_RELOCATABLE_PPC32
+extern long long virt_phys_offset;
 #endif
+
+#endif /* __ASSEMBLY__ */
 #define PHYSICAL_START	kernstart_addr
-#else
+
+#else	/* !CONFIG_NONSTATIC_KERNEL */
 #define PHYSICAL_START	ASM_CONST(CONFIG_PHYSICAL_START)
 #endif
 
+/* See Description below for VIRT_PHYS_OFFSET */
+#ifdef CONFIG_RELOCATABLE_PPC32
+#define VIRT_PHYS_OFFSET virt_phys_offset
+#else
+#define VIRT_PHYS_OFFSET (KERNELBASE - PHYSICAL_START)
+#endif
+
+
 #ifdef CONFIG_PPC64
 #define MEMORY_START	0UL
-#elif defined(CONFIG_RELOCATABLE)
+#elif defined(CONFIG_NONSTATIC_KERNEL)
 #define MEMORY_START	memstart_addr
 #else
 #define MEMORY_START	(PHYSICAL_START + PAGE_OFFSET - KERNELBASE)
@@ -125,12 +139,77 @@ extern phys_addr_t kernstart_addr;
  * determine MEMORY_START until then.  However we can determine PHYSICAL_START
  * from information at hand (program counter, TLB lookup).
  *
+ * On BookE with RELOCATABLE (RELOCATABLE_PPC32)
+ *
+ *   With RELOCATABLE_PPC32,  we support loading the kernel at any physical 
+ *   address without any restriction on the page alignment.
+ *
+ *   We find the runtime address of _stext and relocate ourselves based on 
+ *   the following calculation:
+ *
+ *  	  virtual_base = ALIGN_DOWN(KERNELBASE,256M) +
+ *  				MODULO(_stext.run,256M)
+ *   and create the following mapping:
+ *
+ * 	  ALIGN_DOWN(_stext.run,256M) => ALIGN_DOWN(KERNELBASE,256M)
+ *
+ *   When we process relocations, we cannot depend on the
+ *   existing equation for the __va()/__pa() translations:
+ *
+ * 	   __va(x) = (x)  - PHYSICAL_START + KERNELBASE
+ *
+ *   Where:
+ *   	 PHYSICAL_START = kernstart_addr = Physical address of _stext
+ *  	 KERNELBASE = Compiled virtual address of _stext.
+ *
+ *   This formula holds true iff, kernel load address is TLB page aligned.
+ *
+ *   In our case, we need to also account for the shift in the kernel Virtual 
+ *   address.
+ *
+ *   E.g.,
+ *
+ *   Let the kernel be loaded at 64MB and KERNELBASE be 0xc0000000 (same as PAGE_OFFSET).
+ *   In this case, we would be mapping 0 to 0xc0000000, and kernstart_addr = 64M
+ *
+ *   Now __va(1MB) = (0x100000) - (0x4000000) + 0xc0000000
+ *                 = 0xbc100000 , which is wrong.
+ *
+ *   Rather, it should be : 0xc0000000 + 0x100000 = 0xc0100000
+ *      	according to our mapping.
+ *
+ *   Hence we use the following formula to get the translations right:
+ *
+ * 	  __va(x) = (x) - [ PHYSICAL_START - Effective KERNELBASE ]
+ *
+ * 	  Where :
+ * 		PHYSICAL_START = dynamic load address.(kernstart_addr variable)
+ * 		Effective KERNELBASE = virtual_base =
+ * 				     = ALIGN_DOWN(KERNELBASE,256M) +
+ * 						MODULO(PHYSICAL_START,256M)
+ *
+ * 	To make the cost of __va() / __pa() more light weight, we introduce
+ * 	a new variable virt_phys_offset, which will hold :
+ *
+ * 	virt_phys_offset = Effective KERNELBASE - PHYSICAL_START
+ * 			 = ALIGN_DOWN(KERNELBASE,256M) - 
+ * 			 	ALIGN_DOWN(PHYSICALSTART,256M)
+ *
+ * 	Hence :
+ *
+ * 	__va(x) = x - PHYSICAL_START + Effective KERNELBASE
+ * 		= x + virt_phys_offset
+ *
+ * 		and
+ * 	__pa(x) = x + PHYSICAL_START - Effective KERNELBASE
+ * 		= x - virt_phys_offset
+ * 		
  * On non-Book-E PPC64 PAGE_OFFSET and MEMORY_START are constants so use
  * the other definitions for __va & __pa.
  */
 #ifdef CONFIG_BOOKE
-#define __va(x) ((void *)(unsigned long)((phys_addr_t)(x) - PHYSICAL_START + KERNELBASE))
-#define __pa(x) ((unsigned long)(x) + PHYSICAL_START - KERNELBASE)
+#define __va(x) ((void *)(unsigned long)((phys_addr_t)(x) + VIRT_PHYS_OFFSET))
+#define __pa(x) ((unsigned long)(x) - VIRT_PHYS_OFFSET)
 #else
 #define __va(x) ((void *)(unsigned long)((phys_addr_t)(x) + PAGE_OFFSET - MEMORY_START))
 #define __pa(x) ((unsigned long)(x) - PAGE_OFFSET + MEMORY_START)
@@ -290,6 +369,7 @@ extern void clear_user_page(void *page, unsigned long vaddr, struct page *pg);
 extern void copy_user_page(void *to, void *from, unsigned long vaddr,
 		struct page *p);
 extern int page_is_ram(unsigned long pfn);
+extern int devmem_is_allowed(unsigned long pfn);
 
 #ifdef CONFIG_PPC_SMLPAR
 void arch_free_page(struct page *page, int order);
diff --git a/arch/powerpc/include/asm/page_64.h b/arch/powerpc/include/asm/page_64.h
index fb40ede..fed85e6 100644
--- a/arch/powerpc/include/asm/page_64.h
+++ b/arch/powerpc/include/asm/page_64.h
@@ -130,7 +130,9 @@ do {						\
 
 #ifdef CONFIG_HUGETLB_PAGE
 
+#ifdef CONFIG_PPC_MM_SLICES
 #define HAVE_ARCH_HUGETLB_UNMAPPED_AREA
+#endif
 
 #endif /* !CONFIG_HUGETLB_PAGE */
 
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 56b879a..882b6aa 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -153,8 +153,8 @@ struct pci_dn {
 
 	int	pci_ext_config_space;	/* for pci devices */
 
-#ifdef CONFIG_EEH
 	struct	pci_dev *pcidev;	/* back-pointer to the pci device */
+#ifdef CONFIG_EEH
 	int	class_code;		/* pci device class */
 	int	eeh_mode;		/* See eeh.h for possible EEH_MODEs */
 	int	eeh_config_addr;
@@ -164,6 +164,10 @@ struct pci_dn {
 	int	eeh_false_positives;	/* # times this device reported #ff's */
 	u32	config_space[16];	/* saved PCI config space */
 #endif
+#define IODA_INVALID_PE		(-1)
+#ifdef CONFIG_PPC_POWERNV
+	int	pe_number;
+#endif
 };
 
 /* Get the pointer to a device_node's pci_dn */
diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h
index 49c3de5..1c92013 100644
--- a/arch/powerpc/include/asm/pci.h
+++ b/arch/powerpc/include/asm/pci.h
@@ -184,8 +184,6 @@ extern void of_scan_pci_bridge(struct pci_dev *dev);
 extern void of_scan_bus(struct device_node *node, struct pci_bus *bus);
 extern void of_rescan_bus(struct device_node *node, struct pci_bus *bus);
 
-extern int pci_read_irq_line(struct pci_dev *dev);
-
 struct file;
 extern pgprot_t	pci_phys_mem_access_prot(struct file *file,
 					 unsigned long pfn,
diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h
index 88b0bd9..2e0e411 100644
--- a/arch/powerpc/include/asm/pgtable.h
+++ b/arch/powerpc/include/asm/pgtable.h
@@ -170,6 +170,9 @@ extern int ptep_set_access_flags(struct vm_area_struct *vma, unsigned long addre
 #define pgprot_cached_wthru(prot) (__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \
 				            _PAGE_COHERENT | _PAGE_WRITETHRU))
 
+#define pgprot_cached_noncoherent(prot) \
+		(__pgprot(pgprot_val(prot) & ~_PAGE_CACHE_CTL))
+
 #define pgprot_writecombine pgprot_noncached_wc
 
 struct file;
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index eb11a44..b585bff 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -382,6 +382,9 @@ static inline unsigned long get_clean_sp(struct pt_regs *regs, int is_32)
 }
 #endif
 
+extern unsigned long cpuidle_disable;
+enum idle_boot_override {IDLE_NO_OVERRIDE = 0, IDLE_POWERSAVE_OFF};
+
 #endif /* __KERNEL__ */
 #endif /* __ASSEMBLY__ */
 #endif /* _ASM_POWERPC_PROCESSOR_H */
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 559da19..7fdc2c0 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -951,6 +951,7 @@
 #define PVR_403GCX	0x00201400
 #define PVR_405GP	0x40110000
 #define PVR_476		0x11a52000
+#define PVR_476FPE	0x7ff50000
 #define PVR_STB03XXX	0x40310000
 #define PVR_NP405H	0x41410000
 #define PVR_NP405L	0x41610000
diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
index 03c48e8..500fe1d 100644
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -187,6 +187,10 @@
 #define SPRN_CSRR1	SPRN_SRR3 /* Critical Save and Restore Register 1 */
 #endif
 
+#ifdef CONFIG_PPC_ICSWX
+#define SPRN_HACOP	0x15F	/* Hypervisor Available Coprocessor Register */
+#endif
+
 /* Bit definitions for CCR1. */
 #define	CCR1_DPC	0x00000100 /* Disable L1 I-Cache/D-Cache parity checking */
 #define	CCR1_TCS	0x00000080 /* Timer Clock Select */
diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h
index 41f69ae..01c143b 100644
--- a/arch/powerpc/include/asm/rtas.h
+++ b/arch/powerpc/include/asm/rtas.h
@@ -245,6 +245,12 @@ extern int early_init_dt_scan_rtas(unsigned long node,
 
 extern void pSeries_log_error(char *buf, unsigned int err_type, int fatal);
 
+#ifdef CONFIG_PPC_RTAS_DAEMON
+extern void rtas_cancel_event_scan(void);
+#else
+static inline void rtas_cancel_event_scan(void) { }
+#endif
+
 /* Error types logged.  */
 #define ERR_FLAG_ALREADY_LOGGED	0x0
 #define ERR_FLAG_BOOT		0x1 	/* log was pulled from NVRAM on boot */
@@ -307,5 +313,17 @@ static inline u32 rtas_config_addr(int busno, int devfn, int reg)
 extern void __cpuinit rtas_give_timebase(void);
 extern void __cpuinit rtas_take_timebase(void);
 
+#ifdef CONFIG_PPC_RTAS
+static inline int page_is_rtas_user_buf(unsigned long pfn)
+{
+	unsigned long paddr = (pfn << PAGE_SHIFT);
+	if (paddr >= rtas_rmo_buf && paddr < (rtas_rmo_buf + RTAS_RMOBUF_MAX))
+		return 1;
+	return 0;
+}
+#else
+static inline int page_is_rtas_user_buf(unsigned long pfn) { return 0;}
+#endif
+
 #endif /* __KERNEL__ */
 #endif /* _POWERPC_RTAS_H */
diff --git a/arch/powerpc/include/asm/rwsem.h b/arch/powerpc/include/asm/rwsem.h
deleted file mode 100644
index bb1e2cd..0000000
--- a/arch/powerpc/include/asm/rwsem.h
+++ /dev/null
@@ -1,132 +0,0 @@
-#ifndef _ASM_POWERPC_RWSEM_H
-#define _ASM_POWERPC_RWSEM_H
-
-#ifndef _LINUX_RWSEM_H
-#error "Please don't include <asm/rwsem.h> directly, use <linux/rwsem.h> instead."
-#endif
-
-#ifdef __KERNEL__
-
-/*
- * R/W semaphores for PPC using the stuff in lib/rwsem.c.
- * Adapted largely from include/asm-i386/rwsem.h
- * by Paul Mackerras <paulus@samba.org>.
- */
-
-/*
- * the semaphore definition
- */
-#ifdef CONFIG_PPC64
-# define RWSEM_ACTIVE_MASK		0xffffffffL
-#else
-# define RWSEM_ACTIVE_MASK		0x0000ffffL
-#endif
-
-#define RWSEM_UNLOCKED_VALUE		0x00000000L
-#define RWSEM_ACTIVE_BIAS		0x00000001L
-#define RWSEM_WAITING_BIAS		(-RWSEM_ACTIVE_MASK-1)
-#define RWSEM_ACTIVE_READ_BIAS		RWSEM_ACTIVE_BIAS
-#define RWSEM_ACTIVE_WRITE_BIAS		(RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
-
-/*
- * lock for reading
- */
-static inline void __down_read(struct rw_semaphore *sem)
-{
-	if (unlikely(atomic_long_inc_return((atomic_long_t *)&sem->count) <= 0))
-		rwsem_down_read_failed(sem);
-}
-
-static inline int __down_read_trylock(struct rw_semaphore *sem)
-{
-	long tmp;
-
-	while ((tmp = sem->count) >= 0) {
-		if (tmp == cmpxchg(&sem->count, tmp,
-				   tmp + RWSEM_ACTIVE_READ_BIAS)) {
-			return 1;
-		}
-	}
-	return 0;
-}
-
-/*
- * lock for writing
- */
-static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
-{
-	long tmp;
-
-	tmp = atomic_long_add_return(RWSEM_ACTIVE_WRITE_BIAS,
-				     (atomic_long_t *)&sem->count);
-	if (unlikely(tmp != RWSEM_ACTIVE_WRITE_BIAS))
-		rwsem_down_write_failed(sem);
-}
-
-static inline void __down_write(struct rw_semaphore *sem)
-{
-	__down_write_nested(sem, 0);
-}
-
-static inline int __down_write_trylock(struct rw_semaphore *sem)
-{
-	long tmp;
-
-	tmp = cmpxchg(&sem->count, RWSEM_UNLOCKED_VALUE,
-		      RWSEM_ACTIVE_WRITE_BIAS);
-	return tmp == RWSEM_UNLOCKED_VALUE;
-}
-
-/*
- * unlock after reading
- */
-static inline void __up_read(struct rw_semaphore *sem)
-{
-	long tmp;
-
-	tmp = atomic_long_dec_return((atomic_long_t *)&sem->count);
-	if (unlikely(tmp < -1 && (tmp & RWSEM_ACTIVE_MASK) == 0))
-		rwsem_wake(sem);
-}
-
-/*
- * unlock after writing
- */
-static inline void __up_write(struct rw_semaphore *sem)
-{
-	if (unlikely(atomic_long_sub_return(RWSEM_ACTIVE_WRITE_BIAS,
-				 (atomic_long_t *)&sem->count) < 0))
-		rwsem_wake(sem);
-}
-
-/*
- * implement atomic add functionality
- */
-static inline void rwsem_atomic_add(long delta, struct rw_semaphore *sem)
-{
-	atomic_long_add(delta, (atomic_long_t *)&sem->count);
-}
-
-/*
- * downgrade write lock to read lock
- */
-static inline void __downgrade_write(struct rw_semaphore *sem)
-{
-	long tmp;
-
-	tmp = atomic_long_add_return(-RWSEM_WAITING_BIAS,
-				     (atomic_long_t *)&sem->count);
-	if (tmp < 0)
-		rwsem_downgrade_wake(sem);
-}
-
-/*
- * implement exchange and add functionality
- */
-static inline long rwsem_atomic_update(long delta, struct rw_semaphore *sem)
-{
-	return atomic_long_add_return(delta, (atomic_long_t *)&sem->count);
-}
-
-#endif	/* __KERNEL__ */
-#endif	/* _ASM_POWERPC_RWSEM_H */
diff --git a/arch/powerpc/include/asm/socket.h b/arch/powerpc/include/asm/socket.h
index 866f760..2fc2af8 100644
--- a/arch/powerpc/include/asm/socket.h
+++ b/arch/powerpc/include/asm/socket.h
@@ -69,4 +69,7 @@
 
 #define SO_RXQ_OVFL             40
 
+#define SO_WIFI_STATUS		41
+#define SCM_WIFI_STATUS		SO_WIFI_STATUS
+
 #endif	/* _ASM_POWERPC_SOCKET_H */
diff --git a/arch/powerpc/include/asm/spu.h b/arch/powerpc/include/asm/spu.h
index 4e360bd..93f280e 100644
--- a/arch/powerpc/include/asm/spu.h
+++ b/arch/powerpc/include/asm/spu.h
@@ -25,7 +25,7 @@
 #ifdef __KERNEL__
 
 #include <linux/workqueue.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/mutex.h>
 
 #define LS_SIZE (256 * 1024)
@@ -166,7 +166,7 @@ struct spu {
 	/* beat only */
 	u64 shadow_int_mask_RW[3];
 
-	struct sys_device sysdev;
+	struct device dev;
 
 	int has_mem_affinity;
 	struct list_head aff_list;
@@ -237,7 +237,7 @@ extern long spu_sys_callback(struct spu_syscall_block *s);
 struct file;
 struct spufs_calls {
 	long (*create_thread)(const char __user *name,
-					unsigned int flags, mode_t mode,
+					unsigned int flags, umode_t mode,
 					struct file *neighbor);
 	long (*spu_run)(struct file *filp, __u32 __user *unpc,
 						__u32 __user *ustatus);
@@ -270,11 +270,11 @@ struct spufs_calls {
 int register_spu_syscalls(struct spufs_calls *calls);
 void unregister_spu_syscalls(struct spufs_calls *calls);
 
-int spu_add_sysdev_attr(struct sysdev_attribute *attr);
-void spu_remove_sysdev_attr(struct sysdev_attribute *attr);
+int spu_add_dev_attr(struct device_attribute *attr);
+void spu_remove_dev_attr(struct device_attribute *attr);
 
-int spu_add_sysdev_attr_group(struct attribute_group *attrs);
-void spu_remove_sysdev_attr_group(struct attribute_group *attrs);
+int spu_add_dev_attr_group(struct attribute_group *attrs);
+void spu_remove_dev_attr_group(struct attribute_group *attrs);
 
 int spu_handle_mm_fault(struct mm_struct *mm, unsigned long ea,
 		unsigned long dsisr, unsigned *flt);
diff --git a/arch/powerpc/include/asm/system.h b/arch/powerpc/include/asm/system.h
index e30a13d..c377457 100644
--- a/arch/powerpc/include/asm/system.h
+++ b/arch/powerpc/include/asm/system.h
@@ -193,8 +193,8 @@ extern void cacheable_memzero(void *p, unsigned int nb);
 extern void *cacheable_memcpy(void *, const void *, unsigned int);
 extern int do_page_fault(struct pt_regs *, unsigned long, unsigned long);
 extern void bad_page_fault(struct pt_regs *, unsigned long, int);
-extern int die(const char *, struct pt_regs *, long);
 extern void _exception(int, struct pt_regs *, int, unsigned long);
+extern void die(const char *, struct pt_regs *, long);
 extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
 
 #ifdef CONFIG_BOOKE_WDT
@@ -221,6 +221,15 @@ extern unsigned long klimit;
 extern void *zalloc_maybe_bootmem(size_t size, gfp_t mask);
 
 extern int powersave_nap;	/* set if nap mode can be used in idle loop */
+void cpu_idle_wait(void);
+
+#ifdef CONFIG_PSERIES_IDLE
+extern void update_smt_snooze_delay(int snooze);
+extern int pseries_notify_cpuidle_add_cpu(int cpu);
+#else
+static inline void update_smt_snooze_delay(int snooze) {}
+static inline int pseries_notify_cpuidle_add_cpu(int cpu) { return 0; }
+#endif
 
 /*
  * Atomic exchange
diff --git a/arch/powerpc/include/asm/tce.h b/arch/powerpc/include/asm/tce.h
index f663634..743f36b 100644
--- a/arch/powerpc/include/asm/tce.h
+++ b/arch/powerpc/include/asm/tce.h
@@ -26,10 +26,14 @@
 
 /*
  * Tces come in two formats, one for the virtual bus and a different
- * format for PCI
+ * format for PCI.  PCI TCEs can have hardware or software maintianed
+ * coherency.
  */
-#define TCE_VB  0
-#define TCE_PCI 1
+#define TCE_VB			0
+#define TCE_PCI			1
+#define TCE_PCI_SWINV_CREATE	2
+#define TCE_PCI_SWINV_FREE	4
+#define TCE_PCI_SWINV_PAIR	8
 
 /* TCE page size is 4096 bytes (1 << 12) */
 
diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h
index 836f231..96471494 100644
--- a/arch/powerpc/include/asm/thread_info.h
+++ b/arch/powerpc/include/asm/thread_info.h
@@ -109,7 +109,6 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_RESTOREALL		11	/* Restore all regs (implies NOERROR) */
 #define TIF_NOERROR		12	/* Force successful syscall return */
 #define TIF_NOTIFY_RESUME	13	/* callback before returning to user */
-#define TIF_FREEZE		14	/* Freezing for suspend */
 #define TIF_SYSCALL_TRACEPOINT	15	/* syscall tracepoint instrumentation */
 #define TIF_RUNLATCH		16	/* Is the runlatch enabled? */
 
@@ -127,7 +126,6 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_RESTOREALL		(1<<TIF_RESTOREALL)
 #define _TIF_NOERROR		(1<<TIF_NOERROR)
 #define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
-#define _TIF_FREEZE		(1<<TIF_FREEZE)
 #define _TIF_SYSCALL_TRACEPOINT	(1<<TIF_SYSCALL_TRACEPOINT)
 #define _TIF_RUNLATCH		(1<<TIF_RUNLATCH)
 #define _TIF_SYSCALL_T_OR_A	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \
diff --git a/arch/powerpc/include/asm/time.h b/arch/powerpc/include/asm/time.h
index fe6f7c2..7eb10fb 100644
--- a/arch/powerpc/include/asm/time.h
+++ b/arch/powerpc/include/asm/time.h
@@ -219,5 +219,7 @@ DECLARE_PER_CPU(struct cpu_usage, cpu_usage_array);
 extern void secondary_cpu_time_init(void);
 extern void iSeries_time_init_early(void);
 
+DECLARE_PER_CPU(u64, decrementers_next_tb);
+
 #endif /* __KERNEL__ */
 #endif /* __POWERPC_TIME_H */
diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h
index 1e104af..c971858 100644
--- a/arch/powerpc/include/asm/topology.h
+++ b/arch/powerpc/include/asm/topology.h
@@ -3,7 +3,7 @@
 #ifdef __KERNEL__
 
 
-struct sys_device;
+struct device;
 struct device_node;
 
 #ifdef CONFIG_NUMA
@@ -86,19 +86,19 @@ extern int __node_distance(int, int);
 
 extern void __init dump_numa_cpu_topology(void);
 
-extern int sysfs_add_device_to_node(struct sys_device *dev, int nid);
-extern void sysfs_remove_device_from_node(struct sys_device *dev, int nid);
+extern int sysfs_add_device_to_node(struct device *dev, int nid);
+extern void sysfs_remove_device_from_node(struct device *dev, int nid);
 
 #else
 
 static inline void dump_numa_cpu_topology(void) {}
 
-static inline int sysfs_add_device_to_node(struct sys_device *dev, int nid)
+static inline int sysfs_add_device_to_node(struct device *dev, int nid)
 {
 	return 0;
 }
 
-static inline void sysfs_remove_device_from_node(struct sys_device *dev,
+static inline void sysfs_remove_device_from_node(struct device *dev,
 						int nid)
 {
 }
diff --git a/arch/powerpc/include/asm/types.h b/arch/powerpc/include/asm/types.h
index 8947b98..0abf7f2 100644
--- a/arch/powerpc/include/asm/types.h
+++ b/arch/powerpc/include/asm/types.h
@@ -5,8 +5,11 @@
  * This is here because we used to use l64 for 64bit powerpc
  * and we don't want to impact user mode with our change to ll64
  * in the kernel.
+ *
+ * However, some user programs are fine with this.  They can
+ * flag __SANE_USERSPACE_TYPES__ to get int-ll64.h here.
  */
-#if defined(__powerpc64__) && !defined(__KERNEL__)
+#if !defined(__SANE_USERSPACE_TYPES__) && defined(__powerpc64__) && !defined(__KERNEL__)
 # include <asm-generic/int-l64.h>
 #else
 # include <asm-generic/int-ll64.h>
@@ -27,12 +30,6 @@
  * 2 of the License, or (at your option) any later version.
  */
 
-#ifdef __powerpc64__
-typedef unsigned int umode_t;
-#else
-typedef unsigned short umode_t;
-#endif
-
 typedef struct {
 	__u32 u[4];
 } __attribute__((aligned(16))) __vector128;
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index ce4f7f1..ee728e4 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -85,6 +85,8 @@ extra-$(CONFIG_FSL_BOOKE)	:= head_fsl_booke.o
 extra-$(CONFIG_8xx)		:= head_8xx.o
 extra-y				+= vmlinux.lds
 
+obj-$(CONFIG_RELOCATABLE_PPC32)	+= reloc_32.o
+
 obj-$(CONFIG_PPC32)		+= entry_32.o setup_32.o
 obj-$(CONFIG_PPC64)		+= dma-iommu.o iommu.o
 obj-$(CONFIG_KGDB)		+= kgdb.o
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 7c5324f..04caee7 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -208,6 +208,7 @@ int main(void)
 	DEFINE(PACA_USER_TIME, offsetof(struct paca_struct, user_time));
 	DEFINE(PACA_SYSTEM_TIME, offsetof(struct paca_struct, system_time));
 	DEFINE(PACA_TRAP_SAVE, offsetof(struct paca_struct, trap_save));
+	DEFINE(PACA_NAPSTATELOST, offsetof(struct paca_struct, nap_state_lost));
 #endif /* CONFIG_PPC64 */
 
 	/* RTAS */
diff --git a/arch/powerpc/kernel/cacheinfo.c b/arch/powerpc/kernel/cacheinfo.c
index a3c684b..92c6b00 100644
--- a/arch/powerpc/kernel/cacheinfo.c
+++ b/arch/powerpc/kernel/cacheinfo.c
@@ -451,15 +451,15 @@ out:
 static struct cache_dir *__cpuinit cacheinfo_create_cache_dir(unsigned int cpu_id)
 {
 	struct cache_dir *cache_dir;
-	struct sys_device *sysdev;
+	struct device *dev;
 	struct kobject *kobj = NULL;
 
-	sysdev = get_cpu_sysdev(cpu_id);
-	WARN_ONCE(!sysdev, "no sysdev for CPU %i\n", cpu_id);
-	if (!sysdev)
+	dev = get_cpu_device(cpu_id);
+	WARN_ONCE(!dev, "no dev for CPU %i\n", cpu_id);
+	if (!dev)
 		goto err;
 
-	kobj = kobject_create_and_add("cache", &sysdev->kobj);
+	kobj = kobject_create_and_add("cache", &dev->kobj);
 	if (!kobj)
 		goto err;
 
diff --git a/arch/powerpc/kernel/cpu_setup_a2.S b/arch/powerpc/kernel/cpu_setup_a2.S
index 7f818fe..ebc62f4 100644
--- a/arch/powerpc/kernel/cpu_setup_a2.S
+++ b/arch/powerpc/kernel/cpu_setup_a2.S
@@ -41,11 +41,16 @@ _GLOBAL(__setup_cpu_a2)
 	 * core local but doing it always won't hurt
 	 */
 
-#ifdef CONFIG_PPC_WSP_COPRO
+#ifdef CONFIG_PPC_ICSWX
 	/* Make sure ACOP starts out as zero */
 	li	r3,0
 	mtspr   SPRN_ACOP,r3
 
+	/* Skip the following if we are in Guest mode */
+	mfmsr	r3
+	andis.	r0,r3,MSR_GS@h
+	bne	_icswx_skip_guest
+
 	/* Enable icswx instruction */
 	mfspr   r3,SPRN_A2_CCR2
 	ori     r3,r3,A2_CCR2_ENABLE_ICSWX
@@ -54,7 +59,8 @@ _GLOBAL(__setup_cpu_a2)
 	/* Unmask all CTs in HACOP */
 	li      r3,-1
 	mtspr   SPRN_HACOP,r3
-#endif /* CONFIG_PPC_WSP_COPRO */
+_icswx_skip_guest:
+#endif /* CONFIG_PPC_ICSWX */
 
 	/* Enable doorbell */
 	mfspr   r3,SPRN_A2_CCR2
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index edae5bb..81db9e2 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -1505,6 +1505,19 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_4xx,
 		.platform		= "ppc405",
 	},
+	{	/* APM8018X */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x7ff11432,
+		.cpu_name		= "APM8018X",
+		.cpu_features		= CPU_FTRS_40X,
+		.cpu_user_features	= PPC_FEATURE_32 |
+			PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
+		.mmu_features		= MMU_FTR_TYPE_40x,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.machine_check		= machine_check_4xx,
+		.platform		= "ppc405",
+	},
 	{	/* default match */
 		.pvr_mask		= 0x00000000,
 		.pvr_value		= 0x00000000,
@@ -1830,6 +1843,20 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_47x,
 		.platform		= "ppc470",
 	},
+	{ /* 476fpe */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x7ff50000,
+		.cpu_name		= "476fpe",
+		.cpu_features		= CPU_FTRS_47X | CPU_FTR_476_DD2,
+		.cpu_user_features	= COMMON_USER_BOOKE |
+			PPC_FEATURE_HAS_FPU,
+		.mmu_features		= MMU_FTR_TYPE_47x |
+			MMU_FTR_USE_TLBIVAX_BCAST | MMU_FTR_LOCK_BCAST_INVAL,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 128,
+		.machine_check		= machine_check_47x,
+		.platform		= "ppc470",
+	},
 	{ /* 476 iss */
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x00050000,
diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c
index d879809..28be345 100644
--- a/arch/powerpc/kernel/crash.c
+++ b/arch/powerpc/kernel/crash.c
@@ -10,85 +10,85 @@
  *
  */
 
-#undef DEBUG
-
 #include <linux/kernel.h>
 #include <linux/smp.h>
 #include <linux/reboot.h>
 #include <linux/kexec.h>
-#include <linux/bootmem.h>
 #include <linux/export.h>
 #include <linux/crash_dump.h>
 #include <linux/delay.h>
-#include <linux/elf.h>
-#include <linux/elfcore.h>
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/types.h>
-#include <linux/memblock.h>
 
 #include <asm/processor.h>
 #include <asm/machdep.h>
 #include <asm/kexec.h>
 #include <asm/kdump.h>
 #include <asm/prom.h>
-#include <asm/firmware.h>
 #include <asm/smp.h>
 #include <asm/system.h>
 #include <asm/setjmp.h>
 
-#ifdef DEBUG
-#include <asm/udbg.h>
-#define DBG(fmt...) udbg_printf(fmt)
-#else
-#define DBG(fmt...)
-#endif
+/*
+ * The primary CPU waits a while for all secondary CPUs to enter. This is to
+ * avoid sending an IPI if the secondary CPUs are entering
+ * crash_kexec_secondary on their own (eg via a system reset).
+ *
+ * The secondary timeout has to be longer than the primary. Both timeouts are
+ * in milliseconds.
+ */
+#define PRIMARY_TIMEOUT		500
+#define SECONDARY_TIMEOUT	1000
 
-/* This keeps a track of which one is crashing cpu. */
+#define IPI_TIMEOUT		10000
+#define REAL_MODE_TIMEOUT	10000
+
+/* This keeps a track of which one is the crashing cpu. */
 int crashing_cpu = -1;
-static cpumask_t cpus_in_crash = CPU_MASK_NONE;
-cpumask_t cpus_in_sr = CPU_MASK_NONE;
+static atomic_t cpus_in_crash;
+static int time_to_dump;
 
 #define CRASH_HANDLER_MAX 3
 /* NULL terminated list of shutdown handles */
 static crash_shutdown_t crash_shutdown_handles[CRASH_HANDLER_MAX+1];
 static DEFINE_SPINLOCK(crash_handlers_lock);
 
+static unsigned long crash_shutdown_buf[JMP_BUF_LEN];
+static int crash_shutdown_cpu = -1;
+
+static int handle_fault(struct pt_regs *regs)
+{
+	if (crash_shutdown_cpu == smp_processor_id())
+		longjmp(crash_shutdown_buf, 1);
+	return 0;
+}
+
 #ifdef CONFIG_SMP
-static atomic_t enter_on_soft_reset = ATOMIC_INIT(0);
 
 void crash_ipi_callback(struct pt_regs *regs)
 {
+	static cpumask_t cpus_state_saved = CPU_MASK_NONE;
+
 	int cpu = smp_processor_id();
 
 	if (!cpu_online(cpu))
 		return;
 
 	hard_irq_disable();
-	if (!cpumask_test_cpu(cpu, &cpus_in_crash))
+	if (!cpumask_test_cpu(cpu, &cpus_state_saved)) {
 		crash_save_cpu(regs, cpu);
-	cpumask_set_cpu(cpu, &cpus_in_crash);
-
-	/*
-	 * Entered via soft-reset - could be the kdump
-	 * process is invoked using soft-reset or user activated
-	 * it if some CPU did not respond to an IPI.
-	 * For soft-reset, the secondary CPU can enter this func
-	 * twice. 1 - using IPI, and 2. soft-reset.
-	 * Tell the kexec CPU that entered via soft-reset and ready
-	 * to go down.
-	 */
-	if (cpumask_test_cpu(cpu, &cpus_in_sr)) {
-		cpumask_clear_cpu(cpu, &cpus_in_sr);
-		atomic_inc(&enter_on_soft_reset);
+		cpumask_set_cpu(cpu, &cpus_state_saved);
 	}
 
+	atomic_inc(&cpus_in_crash);
+	smp_mb__after_atomic_inc();
+
 	/*
 	 * Starting the kdump boot.
 	 * This barrier is needed to make sure that all CPUs are stopped.
-	 * If not, soft-reset will be invoked to bring other CPUs.
 	 */
-	while (!cpumask_test_cpu(crashing_cpu, &cpus_in_crash))
+	while (!time_to_dump)
 		cpu_relax();
 
 	if (ppc_md.kexec_cpu_down)
@@ -103,106 +103,99 @@ void crash_ipi_callback(struct pt_regs *regs)
 	/* NOTREACHED */
 }
 
-/*
- * Wait until all CPUs are entered via soft-reset.
- */
-static void crash_soft_reset_check(int cpu)
-{
-	unsigned int ncpus = num_online_cpus() - 1;/* Excluding the panic cpu */
-
-	cpumask_clear_cpu(cpu, &cpus_in_sr);
-	while (atomic_read(&enter_on_soft_reset) != ncpus)
-		cpu_relax();
-}
-
-
 static void crash_kexec_prepare_cpus(int cpu)
 {
 	unsigned int msecs;
-
 	unsigned int ncpus = num_online_cpus() - 1;/* Excluding the panic cpu */
+	int tries = 0;
+	int (*old_handler)(struct pt_regs *regs);
+
+	printk(KERN_EMERG "Sending IPI to other CPUs\n");
 
 	crash_send_ipi(crash_ipi_callback);
 	smp_wmb();
 
+again:
 	/*
 	 * FIXME: Until we will have the way to stop other CPUs reliably,
 	 * the crash CPU will send an IPI and wait for other CPUs to
 	 * respond.
-	 * Delay of at least 10 seconds.
 	 */
-	printk(KERN_EMERG "Sending IPI to other cpus...\n");
-	msecs = 10000;
-	while ((cpumask_weight(&cpus_in_crash) < ncpus) && (--msecs > 0)) {
-		cpu_relax();
+	msecs = IPI_TIMEOUT;
+	while ((atomic_read(&cpus_in_crash) < ncpus) && (--msecs > 0))
 		mdelay(1);
-	}
 
 	/* Would it be better to replace the trap vector here? */
 
+	if (atomic_read(&cpus_in_crash) >= ncpus) {
+		printk(KERN_EMERG "IPI complete\n");
+		return;
+	}
+
+	printk(KERN_EMERG "ERROR: %d cpu(s) not responding\n",
+		ncpus - atomic_read(&cpus_in_crash));
+
 	/*
-	 * FIXME: In case if we do not get all CPUs, one possibility: ask the
-	 * user to do soft reset such that we get all.
-	 * Soft-reset will be used until better mechanism is implemented.
+	 * If we have a panic timeout set then we can't wait indefinitely
+	 * for someone to activate system reset. We also give up on the
+	 * second time through if system reset fail to work.
 	 */
-	if (cpumask_weight(&cpus_in_crash) < ncpus) {
-		printk(KERN_EMERG "done waiting: %d cpu(s) not responding\n",
-			ncpus - cpumask_weight(&cpus_in_crash));
-		printk(KERN_EMERG "Activate soft-reset to stop other cpu(s)\n");
-		cpumask_clear(&cpus_in_sr);
-		atomic_set(&enter_on_soft_reset, 0);
-		while (cpumask_weight(&cpus_in_crash) < ncpus)
-			cpu_relax();
-	}
+	if ((panic_timeout > 0) || (tries > 0))
+		return;
+
 	/*
-	 * Make sure all CPUs are entered via soft-reset if the kdump is
-	 * invoked using soft-reset.
+	 * A system reset will cause all CPUs to take an 0x100 exception.
+	 * The primary CPU returns here via setjmp, and the secondary
+	 * CPUs reexecute the crash_kexec_secondary path.
 	 */
-	if (cpumask_test_cpu(cpu, &cpus_in_sr))
-		crash_soft_reset_check(cpu);
-	/* Leave the IPI callback set */
+	old_handler = __debugger;
+	__debugger = handle_fault;
+	crash_shutdown_cpu = smp_processor_id();
+
+	if (setjmp(crash_shutdown_buf) == 0) {
+		printk(KERN_EMERG "Activate system reset (dumprestart) "
+				  "to stop other cpu(s)\n");
+
+		/*
+		 * A system reset will force all CPUs to execute the
+		 * crash code again. We need to reset cpus_in_crash so we
+		 * wait for everyone to do this.
+		 */
+		atomic_set(&cpus_in_crash, 0);
+		smp_mb();
+
+		while (atomic_read(&cpus_in_crash) < ncpus)
+			cpu_relax();
+	}
+
+	crash_shutdown_cpu = -1;
+	__debugger = old_handler;
+
+	tries++;
+	goto again;
 }
 
 /*
- * This function will be called by secondary cpus or by kexec cpu
- * if soft-reset is activated to stop some CPUs.
+ * This function will be called by secondary cpus.
  */
 void crash_kexec_secondary(struct pt_regs *regs)
 {
-	int cpu = smp_processor_id();
 	unsigned long flags;
-	int msecs = 5;
+	int msecs = SECONDARY_TIMEOUT;
 
 	local_irq_save(flags);
-	/* Wait 5ms if the kexec CPU is not entered yet. */
+
+	/* Wait for the primary crash CPU to signal its progress */
 	while (crashing_cpu < 0) {
 		if (--msecs < 0) {
-			/*
-			 * Either kdump image is not loaded or
-			 * kdump process is not started - Probably xmon
-			 * exited using 'x'(exit and recover) or
-			 * kexec_should_crash() failed for all running tasks.
-			 */
-			cpumask_clear_cpu(cpu, &cpus_in_sr);
+			/* No response, kdump image may not have been loaded */
 			local_irq_restore(flags);
 			return;
 		}
+
 		mdelay(1);
-		cpu_relax();
-	}
-	if (cpu == crashing_cpu) {
-		/*
-		 * Panic CPU will enter this func only via soft-reset.
-		 * Wait until all secondary CPUs entered and
-		 * then start kexec boot.
-		 */
-		crash_soft_reset_check(cpu);
-		cpumask_set_cpu(crashing_cpu, &cpus_in_crash);
-		if (ppc_md.kexec_cpu_down)
-			ppc_md.kexec_cpu_down(1, 0);
-		machine_kexec(kexec_crash_image);
-		/* NOTREACHED */
 	}
+
 	crash_ipi_callback(regs);
 }
 
@@ -211,7 +204,7 @@ void crash_kexec_secondary(struct pt_regs *regs)
 static void crash_kexec_prepare_cpus(int cpu)
 {
 	/*
-	 * move the secondarys to us so that we can copy
+	 * move the secondaries to us so that we can copy
 	 * the new kernel 0-0x100 safely
 	 *
 	 * do this if kexec in setup.c ?
@@ -225,7 +218,6 @@ static void crash_kexec_prepare_cpus(int cpu)
 
 void crash_kexec_secondary(struct pt_regs *regs)
 {
-	cpumask_clear(&cpus_in_sr);
 }
 #endif	/* CONFIG_SMP */
 
@@ -236,7 +228,7 @@ static void crash_kexec_wait_realmode(int cpu)
 	unsigned int msecs;
 	int i;
 
-	msecs = 10000;
+	msecs = REAL_MODE_TIMEOUT;
 	for (i=0; i < nr_cpu_ids && msecs > 0; i++) {
 		if (i == cpu)
 			continue;
@@ -308,22 +300,11 @@ int crash_shutdown_unregister(crash_shutdown_t handler)
 }
 EXPORT_SYMBOL(crash_shutdown_unregister);
 
-static unsigned long crash_shutdown_buf[JMP_BUF_LEN];
-static int crash_shutdown_cpu = -1;
-
-static int handle_fault(struct pt_regs *regs)
-{
-	if (crash_shutdown_cpu == smp_processor_id())
-		longjmp(crash_shutdown_buf, 1);
-	return 0;
-}
-
 void default_machine_crash_shutdown(struct pt_regs *regs)
 {
 	unsigned int i;
 	int (*old_handler)(struct pt_regs *regs);
 
-
 	/*
 	 * This function is only called after the system
 	 * has panicked or is otherwise in a critical state.
@@ -341,15 +322,26 @@ void default_machine_crash_shutdown(struct pt_regs *regs)
 	 * such that another IPI will not be sent.
 	 */
 	crashing_cpu = smp_processor_id();
-	crash_save_cpu(regs, crashing_cpu);
+
+	/*
+	 * If we came in via system reset, wait a while for the secondary
+	 * CPUs to enter.
+	 */
+	if (TRAP(regs) == 0x100)
+		mdelay(PRIMARY_TIMEOUT);
+
 	crash_kexec_prepare_cpus(crashing_cpu);
-	cpumask_set_cpu(crashing_cpu, &cpus_in_crash);
+
+	crash_save_cpu(regs, crashing_cpu);
+
+	time_to_dump = 1;
+
 	crash_kexec_wait_realmode(crashing_cpu);
 
 	machine_kexec_mask_interrupts();
 
 	/*
-	 * Call registered shutdown routines savely.  Swap out
+	 * Call registered shutdown routines safely.  Swap out
 	 * __debugger_fault_handler, and replace on exit.
 	 */
 	old_handler = __debugger_fault_handler;
diff --git a/arch/powerpc/kernel/crash_dump.c b/arch/powerpc/kernel/crash_dump.c
index 424afb6..b3ba516 100644
--- a/arch/powerpc/kernel/crash_dump.c
+++ b/arch/powerpc/kernel/crash_dump.c
@@ -28,7 +28,7 @@
 #define DBG(fmt...)
 #endif
 
-#ifndef CONFIG_RELOCATABLE
+#ifndef CONFIG_NONSTATIC_KERNEL
 void __init reserve_kdump_trampoline(void)
 {
 	memblock_reserve(0, KDUMP_RESERVE_LIMIT);
@@ -67,7 +67,7 @@ void __init setup_kdump_trampoline(void)
 
 	DBG(" <- setup_kdump_trampoline()\n");
 }
-#endif /* CONFIG_RELOCATABLE */
+#endif /* CONFIG_NONSTATIC_KERNEL */
 
 static int __init parse_savemaxmem(char *p)
 {
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index cf9c69b..d4be7bb 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -65,7 +65,7 @@ BEGIN_FTR_SECTION
 	lbz	r0,PACAPROCSTART(r13)
 	cmpwi	r0,0x80
 	bne	1f
-	li	r0,0
+	li	r0,1
 	stb	r0,PACAPROCSTART(r13)
 	b	kvm_start_guest
 1:
diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S
index b725dab..7dd2981 100644
--- a/arch/powerpc/kernel/head_44x.S
+++ b/arch/powerpc/kernel/head_44x.S
@@ -64,6 +64,35 @@ _ENTRY(_start);
 	mr	r31,r3		/* save device tree ptr */
 	li	r24,0		/* CPU number */
 
+#ifdef CONFIG_RELOCATABLE
+/*
+ * Relocate ourselves to the current runtime address.
+ * This is called only by the Boot CPU.
+ * "relocate" is called with our current runtime virutal
+ * address.
+ * r21 will be loaded with the physical runtime address of _stext
+ */
+	bl	0f				/* Get our runtime address */
+0:	mflr	r21				/* Make it accessible */
+	addis	r21,r21,(_stext - 0b)@ha
+	addi	r21,r21,(_stext - 0b)@l 	/* Get our current runtime base */
+
+	/*
+	 * We have the runtime (virutal) address of our base.
+	 * We calculate our shift of offset from a 256M page.
+	 * We could map the 256M page we belong to at PAGE_OFFSET and
+	 * get going from there.
+	 */
+	lis	r4,KERNELBASE@h
+	ori	r4,r4,KERNELBASE@l
+	rlwinm	r6,r21,0,4,31			/* r6 = PHYS_START % 256M */
+	rlwinm	r5,r4,0,4,31			/* r5 = KERNELBASE % 256M */
+	subf	r3,r5,r6			/* r3 = r6 - r5 */
+	add	r3,r4,r3			/* Required Virutal Address */
+
+	bl	relocate
+#endif
+
 	bl	init_cpu_state
 
 	/*
@@ -88,6 +117,65 @@ _ENTRY(_start);
 
 #ifdef CONFIG_RELOCATABLE
 	/*
+	 * Relocatable kernel support based on processing of dynamic
+	 * relocation entries.
+	 *
+	 * r25 will contain RPN/ERPN for the start address of memory
+	 * r21 will contain the current offset of _stext
+	 */
+	lis	r3,kernstart_addr@ha
+	la	r3,kernstart_addr@l(r3)
+
+	/*
+	 * Compute the kernstart_addr.
+	 * kernstart_addr => (r6,r8)
+	 * kernstart_addr & ~0xfffffff => (r6,r7)
+	 */
+	rlwinm	r6,r25,0,28,31	/* ERPN. Bits 32-35 of Address */
+	rlwinm	r7,r25,0,0,3	/* RPN - assuming 256 MB page size */
+	rlwinm	r8,r21,0,4,31	/* r8 = (_stext & 0xfffffff) */
+	or	r8,r7,r8	/* Compute the lower 32bit of kernstart_addr */
+
+	/* Store kernstart_addr */
+	stw	r6,0(r3)	/* higher 32bit */
+	stw	r8,4(r3)	/* lower 32bit  */
+
+	/*
+	 * Compute the virt_phys_offset :
+	 * virt_phys_offset = stext.run - kernstart_addr
+	 *
+	 * stext.run = (KERNELBASE & ~0xfffffff) + (kernstart_addr & 0xfffffff)
+	 * When we relocate, we have :
+	 *
+	 *	(kernstart_addr & 0xfffffff) = (stext.run & 0xfffffff)
+	 *
+	 * hence:
+	 *  virt_phys_offset = (KERNELBASE & ~0xfffffff) - (kernstart_addr & ~0xfffffff)
+	 *
+	 */
+
+	/* KERNELBASE&~0xfffffff => (r4,r5) */
+	li	r4, 0		/* higer 32bit */
+	lis	r5,KERNELBASE@h
+	rlwinm	r5,r5,0,0,3	/* Align to 256M, lower 32bit */
+
+	/*
+	 * 64bit subtraction.
+	 */
+	subfc	r5,r7,r5
+	subfe	r4,r6,r4
+
+	/* Store virt_phys_offset */
+	lis	r3,virt_phys_offset@ha
+	la	r3,virt_phys_offset@l(r3)
+
+	stw	r4,0(r3)
+	stw	r5,4(r3)
+
+#elif defined(CONFIG_DYNAMIC_MEMSTART)
+	/*
+	 * Mapping based, page aligned dynamic kernel loading.
+	 *
 	 * r25 will contain RPN/ERPN for the start address of memory
 	 *
 	 * Add the difference between KERNELBASE and PAGE_OFFSET to the
@@ -732,6 +820,8 @@ _GLOBAL(init_cpu_state)
 	/* We use the PVR to differenciate 44x cores from 476 */
 	mfspr	r3,SPRN_PVR
 	srwi	r3,r3,16
+	cmplwi	cr0,r3,PVR_476FPE@h
+	beq	head_start_47x
 	cmplwi	cr0,r3,PVR_476@h
 	beq	head_start_47x
 	cmplwi	cr0,r3,PVR_476_ISS@h
@@ -800,12 +890,29 @@ skpinv:	addi	r4,r4,1				/* Increment */
 /*
  * Configure and load pinned entry into TLB slot 63.
  */
+#ifdef CONFIG_NONSTATIC_KERNEL
+	/*
+	 * In case of a NONSTATIC_KERNEL we reuse the TLB XLAT
+	 * entries of the initial mapping set by the boot loader.
+	 * The XLAT entry is stored in r25
+	 */
+
+	/* Read the XLAT entry for our current mapping */
+	tlbre	r25,r23,PPC44x_TLB_XLAT
+
+	lis	r3,KERNELBASE@h
+	ori	r3,r3,KERNELBASE@l
+
+	/* Use our current RPN entry */
+	mr	r4,r25
+#else
 
 	lis	r3,PAGE_OFFSET@h
 	ori	r3,r3,PAGE_OFFSET@l
 
 	/* Kernel is at the base of RAM */
 	li r4, 0			/* Load the kernel physical address */
+#endif
 
 	/* Load the kernel PID = 0 */
 	li	r0,0
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 9f5d210..d5d78c4 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -197,7 +197,7 @@ _ENTRY(__early_start)
 
 	bl	early_init
 
-#ifdef CONFIG_RELOCATABLE
+#ifdef CONFIG_DYNAMIC_MEMSTART
 	lis	r3,kernstart_addr@ha
 	la	r3,kernstart_addr@l(r3)
 #ifdef CONFIG_PHYS_64BIT
diff --git a/arch/powerpc/kernel/idle.c b/arch/powerpc/kernel/idle.c
index 39a2baa..7c66ce13 100644
--- a/arch/powerpc/kernel/idle.c
+++ b/arch/powerpc/kernel/idle.c
@@ -39,13 +39,23 @@
 #define cpu_should_die()	0
 #endif
 
+unsigned long cpuidle_disable = IDLE_NO_OVERRIDE;
+EXPORT_SYMBOL(cpuidle_disable);
+
 static int __init powersave_off(char *arg)
 {
 	ppc_md.power_save = NULL;
+	cpuidle_disable = IDLE_POWERSAVE_OFF;
 	return 0;
 }
 __setup("powersave=off", powersave_off);
 
+#if defined(CONFIG_PPC_PSERIES) && defined(CONFIG_TRACEPOINTS)
+static const bool idle_uses_rcu = 1;
+#else
+static const bool idle_uses_rcu;
+#endif
+
 /*
  * The body of the idle task.
  */
@@ -56,7 +66,10 @@ void cpu_idle(void)
 
 	set_thread_flag(TIF_POLLING_NRFLAG);
 	while (1) {
-		tick_nohz_stop_sched_tick(1);
+		tick_nohz_idle_enter();
+		if (!idle_uses_rcu)
+			rcu_idle_enter();
+
 		while (!need_resched() && !cpu_should_die()) {
 			ppc64_runlatch_off();
 
@@ -93,7 +106,9 @@ void cpu_idle(void)
 
 		HMT_medium();
 		ppc64_runlatch_on();
-		tick_nohz_restart_sched_tick();
+		if (!idle_uses_rcu)
+			rcu_idle_exit();
+		tick_nohz_idle_exit();
 		preempt_enable_no_resched();
 		if (cpu_should_die())
 			cpu_die();
@@ -102,6 +117,29 @@ void cpu_idle(void)
 	}
 }
 
+
+/*
+ * cpu_idle_wait - Used to ensure that all the CPUs come out of the old
+ * idle loop and start using the new idle loop.
+ * Required while changing idle handler on SMP systems.
+ * Caller must have changed idle handler to the new value before the call.
+ * This window may be larger on shared systems.
+ */
+void cpu_idle_wait(void)
+{
+	int cpu;
+	smp_mb();
+
+	/* kick all the CPUs so that they exit out of old idle routine */
+	get_online_cpus();
+	for_each_online_cpu(cpu) {
+		if (cpu != smp_processor_id())
+			smp_send_reschedule(cpu);
+	}
+	put_online_cpus();
+}
+EXPORT_SYMBOL_GPL(cpu_idle_wait);
+
 int powersave_nap;
 
 #ifdef CONFIG_SYSCTL
diff --git a/arch/powerpc/kernel/idle_power7.S b/arch/powerpc/kernel/idle_power7.S
index 3a70845..fcdff19 100644
--- a/arch/powerpc/kernel/idle_power7.S
+++ b/arch/powerpc/kernel/idle_power7.S
@@ -54,6 +54,7 @@ _GLOBAL(power7_idle)
 	li	r0,0
 	stb	r0,PACASOFTIRQEN(r13)	/* we'll hard-enable shortly */
 	stb	r0,PACAHARDIRQEN(r13)
+	stb	r0,PACA_NAPSTATELOST(r13)
 
 	/* Continue saving state */
 	SAVE_GPR(2, r1)
@@ -86,6 +87,9 @@ _GLOBAL(power7_wakeup_loss)
 	rfid
 
 _GLOBAL(power7_wakeup_noloss)
+	lbz	r0,PACA_NAPSTATELOST(r13)
+	cmpwi	r0,0
+	bne	.power7_wakeup_loss
 	ld	r1,PACAR1(r13)
 	ld	r4,_MSR(r1)
 	ld	r5,_NIP(r1)
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 5c3c469..701d4ac 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -115,6 +115,15 @@ static inline notrace void set_soft_enabled(unsigned long enable)
 	: : "r" (enable), "i" (offsetof(struct paca_struct, soft_enabled)));
 }
 
+static inline notrace void decrementer_check_overflow(void)
+{
+	u64 now = get_tb_or_rtc();
+	u64 *next_tb = &__get_cpu_var(decrementers_next_tb);
+
+	if (now >= *next_tb)
+		set_dec(1);
+}
+
 notrace void arch_local_irq_restore(unsigned long en)
 {
 	/*
@@ -164,24 +173,21 @@ notrace void arch_local_irq_restore(unsigned long en)
 	 */
 	local_paca->hard_enabled = en;
 
-#ifndef CONFIG_BOOKE
-	/* On server, re-trigger the decrementer if it went negative since
-	 * some processors only trigger on edge transitions of the sign bit.
-	 *
-	 * BookE has a level sensitive decrementer (latches in TSR) so we
-	 * don't need that
+	/*
+	 * Trigger the decrementer if we have a pending event. Some processors
+	 * only trigger on edge transitions of the sign bit. We might also
+	 * have disabled interrupts long enough that the decrementer wrapped
+	 * to positive.
 	 */
-	if ((int)mfspr(SPRN_DEC) < 0)
-		mtspr(SPRN_DEC, 1);
-#endif /* CONFIG_BOOKE */
+	decrementer_check_overflow();
 
 	/*
 	 * Force the delivery of pending soft-disabled interrupts on PS3.
 	 * Any HV call will have this side effect.
 	 */
 	if (firmware_has_feature(FW_FEATURE_PS3_LV1)) {
-		u64 tmp;
-		lv1_get_version_info(&tmp);
+		u64 tmp, tmp2;
+		lv1_get_version_info(&tmp, &tmp2);
 	}
 
 	__hard_irq_enable();
diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index 84daabe..578f35f 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -783,7 +783,7 @@ static const struct file_operations lparcfg_fops = {
 static int __init lparcfg_init(void)
 {
 	struct proc_dir_entry *ent;
-	mode_t mode = S_IRUSR | S_IRGRP | S_IROTH;
+	umode_t mode = S_IRUSR | S_IRGRP | S_IROTH;
 
 	/* Allow writing if we have FW_FEATURE_SPLPAR */
 	if (firmware_has_feature(FW_FEATURE_SPLPAR) &&
diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c
index 9ce1672..c957b12 100644
--- a/arch/powerpc/kernel/machine_kexec.c
+++ b/arch/powerpc/kernel/machine_kexec.c
@@ -107,9 +107,6 @@ void __init reserve_crashkernel(void)
 	unsigned long long crash_size, crash_base;
 	int ret;
 
-	/* this is necessary because of memblock_phys_mem_size() */
-	memblock_analyze();
-
 	/* use common parsing */
 	ret = parse_crashkernel(boot_command_line, memblock_phys_mem_size(),
 			&crash_size, &crash_base);
@@ -128,7 +125,7 @@ void __init reserve_crashkernel(void)
 
 	crash_size = resource_size(&crashk_res);
 
-#ifndef CONFIG_RELOCATABLE
+#ifndef CONFIG_NONSTATIC_KERNEL
 	if (crashk_res.start != KDUMP_KERNELBASE)
 		printk("Crash kernel location must be 0x%x\n",
 				KDUMP_KERNELBASE);
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 458ed3b..fa4a573 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -214,7 +214,7 @@ char __devinit *pcibios_setup(char *str)
  * If the interrupt is used, then gets the interrupt line from the
  * openfirmware and sets it in the pci_dev and pci_config line.
  */
-int pci_read_irq_line(struct pci_dev *pci_dev)
+static int pci_read_irq_line(struct pci_dev *pci_dev)
 {
 	struct of_irq oirq;
 	unsigned int virq;
@@ -283,7 +283,6 @@ int pci_read_irq_line(struct pci_dev *pci_dev)
 
 	return 0;
 }
-EXPORT_SYMBOL(pci_read_irq_line);
 
 /*
  * Platform support for /proc/bus/pci/X/Y mmap()s,
@@ -921,18 +920,22 @@ static void __devinit pcibios_fixup_resources(struct pci_dev *dev)
 		struct resource *res = dev->resource + i;
 		if (!res->flags)
 			continue;
-		/* On platforms that have PCI_PROBE_ONLY set, we don't
-		 * consider 0 as an unassigned BAR value. It's technically
-		 * a valid value, but linux doesn't like it... so when we can
-		 * re-assign things, we do so, but if we can't, we keep it
-		 * around and hope for the best...
+
+		/* If we're going to re-assign everything, we mark all resources
+		 * as unset (and 0-base them). In addition, we mark BARs starting
+		 * at 0 as unset as well, except if PCI_PROBE_ONLY is also set
+		 * since in that case, we don't want to re-assign anything
 		 */
-		if (res->start == 0 && !pci_has_flag(PCI_PROBE_ONLY)) {
-			pr_debug("PCI:%s Resource %d %016llx-%016llx [%x] is unassigned\n",
-				 pci_name(dev), i,
-				 (unsigned long long)res->start,
-				 (unsigned long long)res->end,
-				 (unsigned int)res->flags);
+		if (pci_has_flag(PCI_REASSIGN_ALL_RSRC) ||
+		    (res->start == 0 && !pci_has_flag(PCI_PROBE_ONLY))) {
+			/* Only print message if not re-assigning */
+			if (!pci_has_flag(PCI_REASSIGN_ALL_RSRC))
+				pr_debug("PCI:%s Resource %d %016llx-%016llx [%x] "
+					 "is unassigned\n",
+					 pci_name(dev), i,
+					 (unsigned long long)res->start,
+					 (unsigned long long)res->end,
+					 (unsigned int)res->flags);
 			res->end -= res->start;
 			res->start = 0;
 			res->flags |= IORESOURCE_UNSET;
@@ -1042,6 +1045,16 @@ static void __devinit pcibios_fixup_bridge(struct pci_bus *bus)
 		if (i >= 3 && bus->self->transparent)
 			continue;
 
+		/* If we are going to re-assign everything, mark the resource
+		 * as unset and move it down to 0
+		 */
+		if (pci_has_flag(PCI_REASSIGN_ALL_RSRC)) {
+			res->flags |= IORESOURCE_UNSET;
+			res->end -= res->start;
+			res->start = 0;
+			continue;
+		}
+
 		pr_debug("PCI:%s Bus rsrc %d %016llx-%016llx [%x] fixup...\n",
 			 pci_name(dev), i,
 			 (unsigned long long)res->start,\
@@ -1262,18 +1275,15 @@ void pcibios_allocate_bus_resources(struct pci_bus *bus)
 	pci_bus_for_each_resource(bus, res, i) {
 		if (!res || !res->flags || res->start > res->end || res->parent)
 			continue;
+
+		/* If the resource was left unset at this point, we clear it */
+		if (res->flags & IORESOURCE_UNSET)
+			goto clear_resource;
+
 		if (bus->parent == NULL)
 			pr = (res->flags & IORESOURCE_IO) ?
 				&ioport_resource : &iomem_resource;
 		else {
-			/* Don't bother with non-root busses when
-			 * re-assigning all resources. We clear the
-			 * resource flags as if they were colliding
-			 * and as such ensure proper re-allocation
-			 * later.
-			 */
-			if (pci_has_flag(PCI_REASSIGN_ALL_RSRC))
-				goto clear_resource;
 			pr = pci_find_parent_resource(bus->self, res);
 			if (pr == res) {
 				/* this happens when the generic PCI
@@ -1304,9 +1314,9 @@ void pcibios_allocate_bus_resources(struct pci_bus *bus)
 			if (reparent_resources(pr, res) == 0)
 				continue;
 		}
-		printk(KERN_WARNING "PCI: Cannot allocate resource region "
-		       "%d of PCI bridge %d, will remap\n", i, bus->number);
-clear_resource:
+		pr_warning("PCI: Cannot allocate resource region "
+			   "%d of PCI bridge %d, will remap\n", i, bus->number);
+	clear_resource:
 		res->start = res->end = 0;
 		res->flags = 0;
 	}
@@ -1451,16 +1461,11 @@ void __init pcibios_resource_survey(void)
 {
 	struct pci_bus *b;
 
-	/* Allocate and assign resources. If we re-assign everything, then
-	 * we skip the allocate phase
-	 */
+	/* Allocate and assign resources */
 	list_for_each_entry(b, &pci_root_buses, node)
 		pcibios_allocate_bus_resources(b);
-
-	if (!pci_has_flag(PCI_REASSIGN_ALL_RSRC)) {
-		pcibios_allocate_resources(0);
-		pcibios_allocate_resources(1);
-	}
+	pcibios_allocate_resources(0);
+	pcibios_allocate_resources(1);
 
 	/* Before we start assigning unassigned resource, we try to reserve
 	 * the low IO area and the VGA memory area if they intersect the
@@ -1732,6 +1737,12 @@ void __devinit pcibios_scan_phb(struct pci_controller *hose)
 	if (mode == PCI_PROBE_NORMAL)
 		hose->last_busno = bus->subordinate = pci_scan_child_bus(bus);
 
+	/* Platform gets a chance to do some global fixups before
+	 * we proceed to resource allocation
+	 */
+	if (ppc_md.pcibios_fixup_phb)
+		ppc_md.pcibios_fixup_phb(hose);
+
 	/* Configure PCI Express settings */
 	if (bus && !pci_has_flag(PCI_PROBE_ONLY)) {
 		struct pci_bus *child;
@@ -1747,10 +1758,13 @@ void __devinit pcibios_scan_phb(struct pci_controller *hose)
 static void fixup_hide_host_resource_fsl(struct pci_dev *dev)
 {
 	int i, class = dev->class >> 8;
+	/* When configured as agent, programing interface = 1 */
+	int prog_if = dev->class & 0xf;
 
 	if ((class == PCI_CLASS_PROCESSOR_POWERPC ||
 	     class == PCI_CLASS_BRIDGE_OTHER) &&
 		(dev->hdr_type == PCI_HEADER_TYPE_NORMAL) &&
+		(prog_if == 0) &&
 		(dev->bus->parent == NULL)) {
 		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
 			dev->resource[i].start = 0;
diff --git a/arch/powerpc/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c
index 4e69deb..dd9e4a0 100644
--- a/arch/powerpc/kernel/pci_dn.c
+++ b/arch/powerpc/kernel/pci_dn.c
@@ -50,6 +50,9 @@ void * __devinit update_dn_pci_info(struct device_node *dn, void *data)
 	dn->data = pdn;
 	pdn->node = dn;
 	pdn->phb = phb;
+#ifdef CONFIG_PPC_POWERNV
+	pdn->pe_number = IODA_INVALID_PE;
+#endif
 	regs = of_get_property(dn, "reg", NULL);
 	if (regs) {
 		/* First register entry is addr (00BBSS00)  */
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 6457574..ebe5766 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -584,16 +584,32 @@ static struct regbit {
 	unsigned long bit;
 	const char *name;
 } msr_bits[] = {
+#if defined(CONFIG_PPC64) && !defined(CONFIG_BOOKE)
+	{MSR_SF,	"SF"},
+	{MSR_HV,	"HV"},
+#endif
+	{MSR_VEC,	"VEC"},
+	{MSR_VSX,	"VSX"},
+#ifdef CONFIG_BOOKE
+	{MSR_CE,	"CE"},
+#endif
 	{MSR_EE,	"EE"},
 	{MSR_PR,	"PR"},
 	{MSR_FP,	"FP"},
-	{MSR_VEC,	"VEC"},
-	{MSR_VSX,	"VSX"},
 	{MSR_ME,	"ME"},
-	{MSR_CE,	"CE"},
+#ifdef CONFIG_BOOKE
 	{MSR_DE,	"DE"},
+#else
+	{MSR_SE,	"SE"},
+	{MSR_BE,	"BE"},
+#endif
 	{MSR_IR,	"IR"},
 	{MSR_DR,	"DR"},
+	{MSR_PMM,	"PMM"},
+#ifndef CONFIG_BOOKE
+	{MSR_RI,	"RI"},
+	{MSR_LE,	"LE"},
+#endif
 	{0,		NULL}
 };
 
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index fa1235b..abe405d 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -733,8 +733,6 @@ void __init early_init_devtree(void *params)
 	of_scan_flat_dt(early_init_dt_scan_chosen_ppc, cmd_line);
 
 	/* Scan memory nodes and rebuild MEMBLOCKs */
-	memblock_init();
-
 	of_scan_flat_dt(early_init_dt_scan_root, NULL);
 	of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL);
 
@@ -756,20 +754,14 @@ void __init early_init_devtree(void *params)
 	early_reserve_mem();
 	phyp_dump_reserve_mem();
 
-	limit = memory_limit;
-	if (! limit) {
-		phys_addr_t memsize;
-
-		/* Ensure that total memory size is page-aligned, because
-		 * otherwise mark_bootmem() gets upset. */
-		memblock_analyze();
-		memsize = memblock_phys_mem_size();
-		if ((memsize & PAGE_MASK) != memsize)
-			limit = memsize & PAGE_MASK;
-	}
+	/*
+	 * Ensure that total memory size is page-aligned, because otherwise
+	 * mark_bootmem() gets upset.
+	 */
+	limit = ALIGN(memory_limit ?: memblock_phys_mem_size(), PAGE_SIZE);
 	memblock_enforce_memory_limit(limit);
 
-	memblock_analyze();
+	memblock_allow_resize();
 	memblock_dump_all();
 
 	DBG("Phys. mem: %llx\n", memblock_phys_mem_size());
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index cc58486..eca626e 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -742,7 +742,7 @@ static unsigned char ibm_architecture_vec[] = {
 	W(0xffffffff),			/* virt_base */
 	W(0xffffffff),			/* virt_size */
 	W(0xffffffff),			/* load_base */
-	W(64),				/* 64MB min RMA */
+	W(256),				/* 256MB min RMA */
 	W(0xffffffff),			/* full client load */
 	0,				/* min RMA percentage of total RAM */
 	48,				/* max log_2(hash table size) */
@@ -1224,14 +1224,6 @@ static void __init prom_init_mem(void)
 
 	RELOC(alloc_bottom) = PAGE_ALIGN((unsigned long)&RELOC(_end) + 0x4000);
 
-	/* Check if we have an initrd after the kernel, if we do move our bottom
-	 * point to after it
-	 */
-	if (RELOC(prom_initrd_start)) {
-		if (RELOC(prom_initrd_end) > RELOC(alloc_bottom))
-			RELOC(alloc_bottom) = PAGE_ALIGN(RELOC(prom_initrd_end));
-	}
-
 	/*
 	 * If prom_memory_limit is set we reduce the upper limits *except* for
 	 * alloc_top_high. This must be the real top of RAM so we can put
@@ -1269,6 +1261,15 @@ static void __init prom_init_mem(void)
 	RELOC(alloc_top) = RELOC(rmo_top);
 	RELOC(alloc_top_high) = RELOC(ram_top);
 
+	/*
+	 * Check if we have an initrd after the kernel but still inside
+	 * the RMO.  If we do move our bottom point to after it.
+	 */
+	if (RELOC(prom_initrd_start) &&
+	    RELOC(prom_initrd_start) < RELOC(rmo_top) &&
+	    RELOC(prom_initrd_end) > RELOC(alloc_bottom))
+		RELOC(alloc_bottom) = PAGE_ALIGN(RELOC(prom_initrd_end));
+
 	prom_printf("memory layout at init:\n");
 	prom_printf("  memory_limit : %x (16 MB aligned)\n", RELOC(prom_memory_limit));
 	prom_printf("  alloc_bottom : %x\n", RELOC(alloc_bottom));
@@ -2079,7 +2080,7 @@ static void __init prom_check_displays(void)
 		/* Setup a usable color table when the appropriate
 		 * method is available. Should update this to set-colors */
 		clut = RELOC(default_colors);
-		for (i = 0; i < 32; i++, clut += 3)
+		for (i = 0; i < 16; i++, clut += 3)
 			if (prom_set_color(ih, i, clut[0], clut[1],
 					   clut[2]) != 0)
 				break;
@@ -2844,7 +2845,7 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
 	RELOC(of_platform) = prom_find_machine_type();
 	prom_printf("Detected machine type: %x\n", RELOC(of_platform));
 
-#ifndef CONFIG_RELOCATABLE
+#ifndef CONFIG_NONSTATIC_KERNEL
 	/* Bail if this is a kdump kernel. */
 	if (PHYSICAL_START > 0)
 		prom_panic("Error: You can't boot a kdump kernel from OF!\n");
@@ -2969,9 +2970,11 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
 	/*
 	 * in case stdin is USB and still active on IBM machines...
 	 * Unfortunately quiesce crashes on some powermacs if we have
-	 * closed stdin already (in particular the powerbook 101).
+	 * closed stdin already (in particular the powerbook 101). It
+	 * appears that the OPAL version of OFW doesn't like it either.
 	 */
-	if (RELOC(of_platform) != PLATFORM_POWERMAC)
+	if (RELOC(of_platform) != PLATFORM_POWERMAC &&
+	    RELOC(of_platform) != PLATFORM_OPAL)
 		prom_close_stdin();
 
 	/*
@@ -2987,8 +2990,12 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
 	 * is common to us and kexec
 	 */
 	hdr = RELOC(dt_header_start);
-	prom_printf("returning from prom_init\n");
-	prom_debug("->dt_header_start=0x%x\n", hdr);
+
+	/* Don't print anything after quiesce under OPAL, it crashes OFW */
+	if (RELOC(of_platform) != PLATFORM_OPAL) {
+		prom_printf("returning from prom_init\n");
+		prom_debug("->dt_header_start=0x%x\n", hdr);
+	}
 
 #ifdef CONFIG_PPC32
 	reloc_got2(-offset);
diff --git a/arch/powerpc/kernel/reloc_32.S b/arch/powerpc/kernel/reloc_32.S
new file mode 100644
index 0000000..ef46ba6
--- /dev/null
+++ b/arch/powerpc/kernel/reloc_32.S
@@ -0,0 +1,208 @@
+/*
+ * Code to process dynamic relocations for PPC32.
+ *
+ * Copyrights (C) IBM Corporation, 2011.
+ *	Author: Suzuki Poulose <suzuki@in.ibm.com>
+ *
+ *  - Based on ppc64 code - reloc_64.S
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/ppc_asm.h>
+
+/* Dynamic section table entry tags */
+DT_RELA = 7			/* Tag for Elf32_Rela section */
+DT_RELASZ = 8			/* Size of the Rela relocs */
+DT_RELAENT = 9			/* Size of one Rela reloc entry */
+
+STN_UNDEF = 0			/* Undefined symbol index */
+STB_LOCAL = 0			/* Local binding for the symbol */
+
+R_PPC_ADDR16_LO = 4		/* Lower half of (S+A) */
+R_PPC_ADDR16_HI = 5		/* Upper half of (S+A) */
+R_PPC_ADDR16_HA = 6		/* High Adjusted (S+A) */
+R_PPC_RELATIVE = 22
+
+/*
+ * r3 = desired final address
+ */
+
+_GLOBAL(relocate)
+
+	mflr	r0		/* Save our LR */
+	bl	0f		/* Find our current runtime address */
+0:	mflr	r12		/* Make it accessible */
+	mtlr	r0
+
+	lwz	r11, (p_dyn - 0b)(r12)
+	add	r11, r11, r12	/* runtime address of .dynamic section */
+	lwz	r9, (p_rela - 0b)(r12)
+	add	r9, r9, r12	/* runtime address of .rela.dyn section */
+	lwz	r10, (p_st - 0b)(r12)
+	add	r10, r10, r12	/* runtime address of _stext section */
+	lwz	r13, (p_sym - 0b)(r12)
+	add	r13, r13, r12	/* runtime address of .dynsym section */
+
+	/*
+	 * Scan the dynamic section for RELA, RELASZ entries
+	 */
+	li	r6, 0
+	li	r7, 0
+	li	r8, 0
+1:	lwz	r5, 0(r11)	/* ELF_Dyn.d_tag */
+	cmpwi	r5, 0		/* End of ELF_Dyn[] */
+	beq	eodyn
+	cmpwi	r5, DT_RELA
+	bne	relasz
+	lwz	r7, 4(r11)	/* r7 = rela.link */
+	b	skip
+relasz:
+	cmpwi	r5, DT_RELASZ
+	bne	relaent
+	lwz	r8, 4(r11)	/* r8 = Total Rela relocs size */
+	b	skip
+relaent:
+	cmpwi	r5, DT_RELAENT
+	bne	skip
+	lwz	r6, 4(r11)	/* r6 = Size of one Rela reloc */
+skip:
+	addi	r11, r11, 8
+	b	1b
+eodyn:				/* End of Dyn Table scan */
+
+	/* Check if we have found all the entries */
+	cmpwi	r7, 0
+	beq	done
+	cmpwi	r8, 0
+	beq	done
+	cmpwi	r6, 0
+	beq	done
+
+
+	/*
+	 * Work out the current offset from the link time address of .rela
+	 * section.
+	 *  cur_offset[r7] = rela.run[r9] - rela.link [r7]
+	 *  _stext.link[r12] = _stext.run[r10] - cur_offset[r7]
+	 *  final_offset[r3] = _stext.final[r3] - _stext.link[r12]
+	 */
+	subf	r7, r7, r9	/* cur_offset */
+	subf	r12, r7, r10
+	subf	r3, r12, r3	/* final_offset */
+
+	subf	r8, r6, r8	/* relaz -= relaent */
+	/*
+	 * Scan through the .rela table and process each entry
+	 * r9	- points to the current .rela table entry
+	 * r13	- points to the symbol table
+	 */
+
+	/*
+	 * Check if we have a relocation based on symbol
+	 * r5 will hold the value of the symbol.
+	 */
+applyrela:
+	lwz	r4, 4(r9)		/* r4 = rela.r_info */
+	srwi	r5, r4, 8		/* ELF32_R_SYM(r_info) */
+	cmpwi	r5, STN_UNDEF	/* sym == STN_UNDEF ? */
+	beq	get_type	/* value = 0 */
+	/* Find the value of the symbol at index(r5) */
+	slwi	r5, r5, 4		/* r5 = r5 * sizeof(Elf32_Sym) */
+	add	r12, r13, r5	/* r12 = &__dyn_sym[Index] */
+
+	/*
+	 * GNU ld has a bug, where dynamic relocs based on
+	 * STB_LOCAL symbols, the value should be assumed
+	 * to be zero. - Alan Modra
+	 */
+	/* XXX: Do we need to check if we are using GNU ld ? */
+	lbz	r5, 12(r12)	/* r5 = dyn_sym[Index].st_info */
+	extrwi	r5, r5, 4, 24	/* r5 = ELF32_ST_BIND(r5) */
+	cmpwi	r5, STB_LOCAL	/* st_value = 0, ld bug */
+	beq	get_type	/* We have r5 = 0 */
+	lwz	r5, 4(r12)	/* r5 = __dyn_sym[Index].st_value */
+
+get_type:
+	/* Load the relocation type to r4 */
+	extrwi	r4, r4, 8, 24	/* r4 = ELF32_R_TYPE(r_info) = ((char*)r4)[3] */
+
+	/* R_PPC_RELATIVE */
+	cmpwi	r4, R_PPC_RELATIVE
+	bne	hi16
+	lwz	r4, 0(r9)	/* r_offset */
+	lwz	r0, 8(r9)	/* r_addend */
+	add	r0, r0, r3	/* final addend */
+	stwx	r0, r4, r7	/* memory[r4+r7]) = (u32)r0 */
+	b	nxtrela		/* continue */
+
+	/* R_PPC_ADDR16_HI */
+hi16:
+	cmpwi	r4, R_PPC_ADDR16_HI
+	bne	ha16
+	lwz	r4, 0(r9)	/* r_offset */
+	lwz	r0, 8(r9)	/* r_addend */
+	add	r0, r0, r3
+	add	r0, r0, r5	/* r0 = (S+A+Offset) */
+	extrwi	r0, r0, 16, 0	/* r0 = (r0 >> 16) */
+	b	store_half
+
+	/* R_PPC_ADDR16_HA */
+ha16:
+	cmpwi	r4, R_PPC_ADDR16_HA
+	bne	lo16
+	lwz	r4, 0(r9)	/* r_offset */
+	lwz	r0, 8(r9)	/* r_addend */
+	add	r0, r0, r3
+	add	r0, r0, r5	/* r0 = (S+A+Offset) */
+	extrwi	r5, r0, 1, 16	/* Extract bit 16 */
+	extrwi	r0, r0, 16, 0	/* r0 = (r0 >> 16) */
+	add	r0, r0, r5	/* Add it to r0 */
+	b	store_half
+
+	/* R_PPC_ADDR16_LO */
+lo16:
+	cmpwi	r4, R_PPC_ADDR16_LO
+	bne	nxtrela
+	lwz	r4, 0(r9)	/* r_offset */
+	lwz	r0, 8(r9)	/* r_addend */
+	add	r0, r0, r3
+	add	r0, r0, r5	/* r0 = (S+A+Offset) */
+	extrwi	r0, r0, 16, 16	/* r0 &= 0xffff */
+	/* Fall through to */
+
+	/* Store half word */
+store_half:
+	sthx	r0, r4, r7	/* memory[r4+r7] = (u16)r0 */
+
+nxtrela:
+	/*
+	 * We have to flush the modified instructions to the
+	 * main storage from the d-cache. And also, invalidate the
+	 * cached instructions in i-cache which has been modified.
+	 *
+	 * We delay the sync / isync operation till the end, since
+	 * we won't be executing the modified instructions until
+	 * we return from here.
+	 */
+	dcbst	r4,r7
+	sync			/* Ensure the data is flushed before icbi */
+	icbi	r4,r7
+	cmpwi	r8, 0		/* relasz = 0 ? */
+	ble	done
+	add	r9, r9, r6	/* move to next entry in the .rela table */
+	subf	r8, r6, r8	/* relasz -= relaent */
+	b	applyrela
+
+done:
+	sync			/* Wait for the flush to finish */
+	isync			/* Discard prefetched instructions */
+	blr
+
+p_dyn:		.long	__dynamic_start - 0b
+p_rela:		.long	__rela_dyn_start - 0b
+p_sym:		.long	__dynamic_symtab - 0b
+p_st:		.long	_stext - 0b
diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c
index e037c74..4174b4b 100644
--- a/arch/powerpc/kernel/rtas_flash.c
+++ b/arch/powerpc/kernel/rtas_flash.c
@@ -568,6 +568,12 @@ static void rtas_flash_firmware(int reboot_type)
 	}
 
 	/*
+	 * Just before starting the firmware flash, cancel the event scan work
+	 * to avoid any soft lockup issues.
+	 */
+	rtas_cancel_event_scan();
+
+	/*
 	 * NOTE: the "first" block must be under 4GB, so we create
 	 * an entry with no data blocks in the reserved buffer in
 	 * the kernel data segment.
diff --git a/arch/powerpc/kernel/rtasd.c b/arch/powerpc/kernel/rtasd.c
index 481ef06..1045ff4 100644
--- a/arch/powerpc/kernel/rtasd.c
+++ b/arch/powerpc/kernel/rtasd.c
@@ -472,6 +472,13 @@ static void start_event_scan(void)
 				 &event_scan_work, event_scan_delay);
 }
 
+/* Cancel the rtas event scan work */
+void rtas_cancel_event_scan(void)
+{
+	cancel_delayed_work_sync(&event_scan_work);
+}
+EXPORT_SYMBOL_GPL(rtas_cancel_event_scan);
+
 static int __init rtas_init(void)
 {
 	struct proc_dir_entry *entry;
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index fb9bb46..4cb8f1e 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -35,6 +35,8 @@
 #include <linux/pci.h>
 #include <linux/lockdep.h>
 #include <linux/memblock.h>
+#include <linux/hugetlb.h>
+
 #include <asm/io.h>
 #include <asm/kdump.h>
 #include <asm/prom.h>
@@ -64,6 +66,7 @@
 #include <asm/mmu_context.h>
 #include <asm/code-patching.h>
 #include <asm/kvm_ppc.h>
+#include <asm/hugetlb.h>
 
 #include "setup.h"
 
@@ -217,6 +220,13 @@ void __init early_setup(unsigned long dt_ptr)
 	/* Initialize the hash table or TLB handling */
 	early_init_mmu();
 
+	/*
+	 * Reserve any gigantic pages requested on the command line.
+	 * memblock needs to have been initialized by the time this is
+	 * called since this will reserve memory.
+	 */
+	reserve_hugetlb_gpages();
+
 	DBG(" <- early_setup()\n");
 }
 
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 6df7090..46695fe 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -27,7 +27,7 @@
 #include <linux/spinlock.h>
 #include <linux/cache.h>
 #include <linux/err.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/cpu.h>
 #include <linux/notifier.h>
 #include <linux/topology.h>
@@ -187,7 +187,8 @@ int smp_request_message_ipi(int virq, int msg)
 		return 1;
 	}
 #endif
-	err = request_irq(virq, smp_ipi_action[msg], IRQF_PERCPU,
+	err = request_irq(virq, smp_ipi_action[msg],
+			  IRQF_PERCPU | IRQF_NO_THREAD,
 			  smp_ipi_name[msg], 0);
 	WARN(err < 0, "unable to request_irq %d for %s (rc %d)\n",
 		virq, smp_ipi_name[msg], err);
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index ce035c1..883e74c 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -1,4 +1,4 @@
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/cpu.h>
 #include <linux/smp.h>
 #include <linux/percpu.h>
@@ -18,6 +18,7 @@
 #include <asm/machdep.h>
 #include <asm/smp.h>
 #include <asm/pmc.h>
+#include <asm/system.h>
 
 #include "cacheinfo.h"
 
@@ -37,12 +38,12 @@ static DEFINE_PER_CPU(struct cpu, cpu_devices);
 /* Time in microseconds we delay before sleeping in the idle loop */
 DEFINE_PER_CPU(long, smt_snooze_delay) = { 100 };
 
-static ssize_t store_smt_snooze_delay(struct sys_device *dev,
-				      struct sysdev_attribute *attr,
+static ssize_t store_smt_snooze_delay(struct device *dev,
+				      struct device_attribute *attr,
 				      const char *buf,
 				      size_t count)
 {
-	struct cpu *cpu = container_of(dev, struct cpu, sysdev);
+	struct cpu *cpu = container_of(dev, struct cpu, dev);
 	ssize_t ret;
 	long snooze;
 
@@ -50,21 +51,22 @@ static ssize_t store_smt_snooze_delay(struct sys_device *dev,
 	if (ret != 1)
 		return -EINVAL;
 
-	per_cpu(smt_snooze_delay, cpu->sysdev.id) = snooze;
+	per_cpu(smt_snooze_delay, cpu->dev.id) = snooze;
+	update_smt_snooze_delay(snooze);
 
 	return count;
 }
 
-static ssize_t show_smt_snooze_delay(struct sys_device *dev,
-				     struct sysdev_attribute *attr,
+static ssize_t show_smt_snooze_delay(struct device *dev,
+				     struct device_attribute *attr,
 				     char *buf)
 {
-	struct cpu *cpu = container_of(dev, struct cpu, sysdev);
+	struct cpu *cpu = container_of(dev, struct cpu, dev);
 
-	return sprintf(buf, "%ld\n", per_cpu(smt_snooze_delay, cpu->sysdev.id));
+	return sprintf(buf, "%ld\n", per_cpu(smt_snooze_delay, cpu->dev.id));
 }
 
-static SYSDEV_ATTR(smt_snooze_delay, 0644, show_smt_snooze_delay,
+static DEVICE_ATTR(smt_snooze_delay, 0644, show_smt_snooze_delay,
 		   store_smt_snooze_delay);
 
 static int __init setup_smt_snooze_delay(char *str)
@@ -117,25 +119,25 @@ static void write_##NAME(void *val) \
 	ppc_enable_pmcs(); \
 	mtspr(ADDRESS, *(unsigned long *)val);	\
 } \
-static ssize_t show_##NAME(struct sys_device *dev, \
-			struct sysdev_attribute *attr, \
+static ssize_t show_##NAME(struct device *dev, \
+			struct device_attribute *attr, \
 			char *buf) \
 { \
-	struct cpu *cpu = container_of(dev, struct cpu, sysdev); \
+	struct cpu *cpu = container_of(dev, struct cpu, dev); \
 	unsigned long val; \
-	smp_call_function_single(cpu->sysdev.id, read_##NAME, &val, 1);	\
+	smp_call_function_single(cpu->dev.id, read_##NAME, &val, 1);	\
 	return sprintf(buf, "%lx\n", val); \
 } \
 static ssize_t __used \
-	store_##NAME(struct sys_device *dev, struct sysdev_attribute *attr, \
+	store_##NAME(struct device *dev, struct device_attribute *attr, \
 			const char *buf, size_t count) \
 { \
-	struct cpu *cpu = container_of(dev, struct cpu, sysdev); \
+	struct cpu *cpu = container_of(dev, struct cpu, dev); \
 	unsigned long val; \
 	int ret = sscanf(buf, "%lx", &val); \
 	if (ret != 1) \
 		return -EINVAL; \
-	smp_call_function_single(cpu->sysdev.id, write_##NAME, &val, 1); \
+	smp_call_function_single(cpu->dev.id, write_##NAME, &val, 1); \
 	return count; \
 }
 
@@ -177,23 +179,25 @@ SYSFS_PMCSETUP(mmcra, SPRN_MMCRA);
 SYSFS_PMCSETUP(purr, SPRN_PURR);
 SYSFS_PMCSETUP(spurr, SPRN_SPURR);
 SYSFS_PMCSETUP(dscr, SPRN_DSCR);
+SYSFS_PMCSETUP(pir, SPRN_PIR);
 
-static SYSDEV_ATTR(mmcra, 0600, show_mmcra, store_mmcra);
-static SYSDEV_ATTR(spurr, 0600, show_spurr, NULL);
-static SYSDEV_ATTR(dscr, 0600, show_dscr, store_dscr);
-static SYSDEV_ATTR(purr, 0600, show_purr, store_purr);
+static DEVICE_ATTR(mmcra, 0600, show_mmcra, store_mmcra);
+static DEVICE_ATTR(spurr, 0600, show_spurr, NULL);
+static DEVICE_ATTR(dscr, 0600, show_dscr, store_dscr);
+static DEVICE_ATTR(purr, 0600, show_purr, store_purr);
+static DEVICE_ATTR(pir, 0400, show_pir, NULL);
 
 unsigned long dscr_default = 0;
 EXPORT_SYMBOL(dscr_default);
 
-static ssize_t show_dscr_default(struct sysdev_class *class,
-		struct sysdev_class_attribute *attr, char *buf)
+static ssize_t show_dscr_default(struct device *dev,
+		struct device_attribute *attr, char *buf)
 {
 	return sprintf(buf, "%lx\n", dscr_default);
 }
 
-static ssize_t __used store_dscr_default(struct sysdev_class *class,
-		struct sysdev_class_attribute *attr, const char *buf,
+static ssize_t __used store_dscr_default(struct device *dev,
+		struct device_attribute *attr, const char *buf,
 		size_t count)
 {
 	unsigned long val;
@@ -207,15 +211,14 @@ static ssize_t __used store_dscr_default(struct sysdev_class *class,
 	return count;
 }
 
-static SYSDEV_CLASS_ATTR(dscr_default, 0600,
+static DEVICE_ATTR(dscr_default, 0600,
 		show_dscr_default, store_dscr_default);
 
 static void sysfs_create_dscr_default(void)
 {
 	int err = 0;
 	if (cpu_has_feature(CPU_FTR_DSCR))
-		err = sysfs_create_file(&cpu_sysdev_class.kset.kobj,
-			&attr_dscr_default.attr);
+		err = device_create_file(cpu_subsys.dev_root, &dev_attr_dscr_default);
 }
 #endif /* CONFIG_PPC64 */
 
@@ -259,72 +262,72 @@ SYSFS_PMCSETUP(tsr3, SPRN_PA6T_TSR3);
 #endif /* HAS_PPC_PMC_PA6T */
 
 #ifdef HAS_PPC_PMC_IBM
-static struct sysdev_attribute ibm_common_attrs[] = {
-	_SYSDEV_ATTR(mmcr0, 0600, show_mmcr0, store_mmcr0),
-	_SYSDEV_ATTR(mmcr1, 0600, show_mmcr1, store_mmcr1),
+static struct device_attribute ibm_common_attrs[] = {
+	__ATTR(mmcr0, 0600, show_mmcr0, store_mmcr0),
+	__ATTR(mmcr1, 0600, show_mmcr1, store_mmcr1),
 };
 #endif /* HAS_PPC_PMC_G4 */
 
 #ifdef HAS_PPC_PMC_G4
-static struct sysdev_attribute g4_common_attrs[] = {
-	_SYSDEV_ATTR(mmcr0, 0600, show_mmcr0, store_mmcr0),
-	_SYSDEV_ATTR(mmcr1, 0600, show_mmcr1, store_mmcr1),
-	_SYSDEV_ATTR(mmcr2, 0600, show_mmcr2, store_mmcr2),
+static struct device_attribute g4_common_attrs[] = {
+	__ATTR(mmcr0, 0600, show_mmcr0, store_mmcr0),
+	__ATTR(mmcr1, 0600, show_mmcr1, store_mmcr1),
+	__ATTR(mmcr2, 0600, show_mmcr2, store_mmcr2),
 };
 #endif /* HAS_PPC_PMC_G4 */
 
-static struct sysdev_attribute classic_pmc_attrs[] = {
-	_SYSDEV_ATTR(pmc1, 0600, show_pmc1, store_pmc1),
-	_SYSDEV_ATTR(pmc2, 0600, show_pmc2, store_pmc2),
-	_SYSDEV_ATTR(pmc3, 0600, show_pmc3, store_pmc3),
-	_SYSDEV_ATTR(pmc4, 0600, show_pmc4, store_pmc4),
-	_SYSDEV_ATTR(pmc5, 0600, show_pmc5, store_pmc5),
-	_SYSDEV_ATTR(pmc6, 0600, show_pmc6, store_pmc6),
+static struct device_attribute classic_pmc_attrs[] = {
+	__ATTR(pmc1, 0600, show_pmc1, store_pmc1),
+	__ATTR(pmc2, 0600, show_pmc2, store_pmc2),
+	__ATTR(pmc3, 0600, show_pmc3, store_pmc3),
+	__ATTR(pmc4, 0600, show_pmc4, store_pmc4),
+	__ATTR(pmc5, 0600, show_pmc5, store_pmc5),
+	__ATTR(pmc6, 0600, show_pmc6, store_pmc6),
 #ifdef CONFIG_PPC64
-	_SYSDEV_ATTR(pmc7, 0600, show_pmc7, store_pmc7),
-	_SYSDEV_ATTR(pmc8, 0600, show_pmc8, store_pmc8),
+	__ATTR(pmc7, 0600, show_pmc7, store_pmc7),
+	__ATTR(pmc8, 0600, show_pmc8, store_pmc8),
 #endif
 };
 
 #ifdef HAS_PPC_PMC_PA6T
-static struct sysdev_attribute pa6t_attrs[] = {
-	_SYSDEV_ATTR(mmcr0, 0600, show_mmcr0, store_mmcr0),
-	_SYSDEV_ATTR(mmcr1, 0600, show_mmcr1, store_mmcr1),
-	_SYSDEV_ATTR(pmc0, 0600, show_pa6t_pmc0, store_pa6t_pmc0),
-	_SYSDEV_ATTR(pmc1, 0600, show_pa6t_pmc1, store_pa6t_pmc1),
-	_SYSDEV_ATTR(pmc2, 0600, show_pa6t_pmc2, store_pa6t_pmc2),
-	_SYSDEV_ATTR(pmc3, 0600, show_pa6t_pmc3, store_pa6t_pmc3),
-	_SYSDEV_ATTR(pmc4, 0600, show_pa6t_pmc4, store_pa6t_pmc4),
-	_SYSDEV_ATTR(pmc5, 0600, show_pa6t_pmc5, store_pa6t_pmc5),
+static struct device_attribute pa6t_attrs[] = {
+	__ATTR(mmcr0, 0600, show_mmcr0, store_mmcr0),
+	__ATTR(mmcr1, 0600, show_mmcr1, store_mmcr1),
+	__ATTR(pmc0, 0600, show_pa6t_pmc0, store_pa6t_pmc0),
+	__ATTR(pmc1, 0600, show_pa6t_pmc1, store_pa6t_pmc1),
+	__ATTR(pmc2, 0600, show_pa6t_pmc2, store_pa6t_pmc2),
+	__ATTR(pmc3, 0600, show_pa6t_pmc3, store_pa6t_pmc3),
+	__ATTR(pmc4, 0600, show_pa6t_pmc4, store_pa6t_pmc4),
+	__ATTR(pmc5, 0600, show_pa6t_pmc5, store_pa6t_pmc5),
 #ifdef CONFIG_DEBUG_KERNEL
-	_SYSDEV_ATTR(hid0, 0600, show_hid0, store_hid0),
-	_SYSDEV_ATTR(hid1, 0600, show_hid1, store_hid1),
-	_SYSDEV_ATTR(hid4, 0600, show_hid4, store_hid4),
-	_SYSDEV_ATTR(hid5, 0600, show_hid5, store_hid5),
-	_SYSDEV_ATTR(ima0, 0600, show_ima0, store_ima0),
-	_SYSDEV_ATTR(ima1, 0600, show_ima1, store_ima1),
-	_SYSDEV_ATTR(ima2, 0600, show_ima2, store_ima2),
-	_SYSDEV_ATTR(ima3, 0600, show_ima3, store_ima3),
-	_SYSDEV_ATTR(ima4, 0600, show_ima4, store_ima4),
-	_SYSDEV_ATTR(ima5, 0600, show_ima5, store_ima5),
-	_SYSDEV_ATTR(ima6, 0600, show_ima6, store_ima6),
-	_SYSDEV_ATTR(ima7, 0600, show_ima7, store_ima7),
-	_SYSDEV_ATTR(ima8, 0600, show_ima8, store_ima8),
-	_SYSDEV_ATTR(ima9, 0600, show_ima9, store_ima9),
-	_SYSDEV_ATTR(imaat, 0600, show_imaat, store_imaat),
-	_SYSDEV_ATTR(btcr, 0600, show_btcr, store_btcr),
-	_SYSDEV_ATTR(pccr, 0600, show_pccr, store_pccr),
-	_SYSDEV_ATTR(rpccr, 0600, show_rpccr, store_rpccr),
-	_SYSDEV_ATTR(der, 0600, show_der, store_der),
-	_SYSDEV_ATTR(mer, 0600, show_mer, store_mer),
-	_SYSDEV_ATTR(ber, 0600, show_ber, store_ber),
-	_SYSDEV_ATTR(ier, 0600, show_ier, store_ier),
-	_SYSDEV_ATTR(sier, 0600, show_sier, store_sier),
-	_SYSDEV_ATTR(siar, 0600, show_siar, store_siar),
-	_SYSDEV_ATTR(tsr0, 0600, show_tsr0, store_tsr0),
-	_SYSDEV_ATTR(tsr1, 0600, show_tsr1, store_tsr1),
-	_SYSDEV_ATTR(tsr2, 0600, show_tsr2, store_tsr2),
-	_SYSDEV_ATTR(tsr3, 0600, show_tsr3, store_tsr3),
+	__ATTR(hid0, 0600, show_hid0, store_hid0),
+	__ATTR(hid1, 0600, show_hid1, store_hid1),
+	__ATTR(hid4, 0600, show_hid4, store_hid4),
+	__ATTR(hid5, 0600, show_hid5, store_hid5),
+	__ATTR(ima0, 0600, show_ima0, store_ima0),
+	__ATTR(ima1, 0600, show_ima1, store_ima1),
+	__ATTR(ima2, 0600, show_ima2, store_ima2),
+	__ATTR(ima3, 0600, show_ima3, store_ima3),
+	__ATTR(ima4, 0600, show_ima4, store_ima4),
+	__ATTR(ima5, 0600, show_ima5, store_ima5),
+	__ATTR(ima6, 0600, show_ima6, store_ima6),
+	__ATTR(ima7, 0600, show_ima7, store_ima7),
+	__ATTR(ima8, 0600, show_ima8, store_ima8),
+	__ATTR(ima9, 0600, show_ima9, store_ima9),
+	__ATTR(imaat, 0600, show_imaat, store_imaat),
+	__ATTR(btcr, 0600, show_btcr, store_btcr),
+	__ATTR(pccr, 0600, show_pccr, store_pccr),
+	__ATTR(rpccr, 0600, show_rpccr, store_rpccr),
+	__ATTR(der, 0600, show_der, store_der),
+	__ATTR(mer, 0600, show_mer, store_mer),
+	__ATTR(ber, 0600, show_ber, store_ber),
+	__ATTR(ier, 0600, show_ier, store_ier),
+	__ATTR(sier, 0600, show_sier, store_sier),
+	__ATTR(siar, 0600, show_siar, store_siar),
+	__ATTR(tsr0, 0600, show_tsr0, store_tsr0),
+	__ATTR(tsr1, 0600, show_tsr1, store_tsr1),
+	__ATTR(tsr2, 0600, show_tsr2, store_tsr2),
+	__ATTR(tsr3, 0600, show_tsr3, store_tsr3),
 #endif /* CONFIG_DEBUG_KERNEL */
 };
 #endif /* HAS_PPC_PMC_PA6T */
@@ -333,14 +336,14 @@ static struct sysdev_attribute pa6t_attrs[] = {
 static void __cpuinit register_cpu_online(unsigned int cpu)
 {
 	struct cpu *c = &per_cpu(cpu_devices, cpu);
-	struct sys_device *s = &c->sysdev;
-	struct sysdev_attribute *attrs, *pmc_attrs;
+	struct device *s = &c->dev;
+	struct device_attribute *attrs, *pmc_attrs;
 	int i, nattrs;
 
 #ifdef CONFIG_PPC64
 	if (!firmware_has_feature(FW_FEATURE_ISERIES) &&
 			cpu_has_feature(CPU_FTR_SMT))
-		sysdev_create_file(s, &attr_smt_snooze_delay);
+		device_create_file(s, &dev_attr_smt_snooze_delay);
 #endif
 
 	/* PMC stuff */
@@ -348,14 +351,14 @@ static void __cpuinit register_cpu_online(unsigned int cpu)
 #ifdef HAS_PPC_PMC_IBM
 	case PPC_PMC_IBM:
 		attrs = ibm_common_attrs;
-		nattrs = sizeof(ibm_common_attrs) / sizeof(struct sysdev_attribute);
+		nattrs = sizeof(ibm_common_attrs) / sizeof(struct device_attribute);
 		pmc_attrs = classic_pmc_attrs;
 		break;
 #endif /* HAS_PPC_PMC_IBM */
 #ifdef HAS_PPC_PMC_G4
 	case PPC_PMC_G4:
 		attrs = g4_common_attrs;
-		nattrs = sizeof(g4_common_attrs) / sizeof(struct sysdev_attribute);
+		nattrs = sizeof(g4_common_attrs) / sizeof(struct device_attribute);
 		pmc_attrs = classic_pmc_attrs;
 		break;
 #endif /* HAS_PPC_PMC_G4 */
@@ -363,7 +366,7 @@ static void __cpuinit register_cpu_online(unsigned int cpu)
 	case PPC_PMC_PA6T:
 		/* PA Semi starts counting at PMC0 */
 		attrs = pa6t_attrs;
-		nattrs = sizeof(pa6t_attrs) / sizeof(struct sysdev_attribute);
+		nattrs = sizeof(pa6t_attrs) / sizeof(struct device_attribute);
 		pmc_attrs = NULL;
 		break;
 #endif /* HAS_PPC_PMC_PA6T */
@@ -374,24 +377,27 @@ static void __cpuinit register_cpu_online(unsigned int cpu)
 	}
 
 	for (i = 0; i < nattrs; i++)
-		sysdev_create_file(s, &attrs[i]);
+		device_create_file(s, &attrs[i]);
 
 	if (pmc_attrs)
 		for (i = 0; i < cur_cpu_spec->num_pmcs; i++)
-			sysdev_create_file(s, &pmc_attrs[i]);
+			device_create_file(s, &pmc_attrs[i]);
 
 #ifdef CONFIG_PPC64
 	if (cpu_has_feature(CPU_FTR_MMCRA))
-		sysdev_create_file(s, &attr_mmcra);
+		device_create_file(s, &dev_attr_mmcra);
 
 	if (cpu_has_feature(CPU_FTR_PURR))
-		sysdev_create_file(s, &attr_purr);
+		device_create_file(s, &dev_attr_purr);
 
 	if (cpu_has_feature(CPU_FTR_SPURR))
-		sysdev_create_file(s, &attr_spurr);
+		device_create_file(s, &dev_attr_spurr);
 
 	if (cpu_has_feature(CPU_FTR_DSCR))
-		sysdev_create_file(s, &attr_dscr);
+		device_create_file(s, &dev_attr_dscr);
+
+	if (cpu_has_feature(CPU_FTR_PPCAS_ARCH_V2))
+		device_create_file(s, &dev_attr_pir);
 #endif /* CONFIG_PPC64 */
 
 	cacheinfo_cpu_online(cpu);
@@ -401,8 +407,8 @@ static void __cpuinit register_cpu_online(unsigned int cpu)
 static void unregister_cpu_online(unsigned int cpu)
 {
 	struct cpu *c = &per_cpu(cpu_devices, cpu);
-	struct sys_device *s = &c->sysdev;
-	struct sysdev_attribute *attrs, *pmc_attrs;
+	struct device *s = &c->dev;
+	struct device_attribute *attrs, *pmc_attrs;
 	int i, nattrs;
 
 	BUG_ON(!c->hotpluggable);
@@ -410,7 +416,7 @@ static void unregister_cpu_online(unsigned int cpu)
 #ifdef CONFIG_PPC64
 	if (!firmware_has_feature(FW_FEATURE_ISERIES) &&
 			cpu_has_feature(CPU_FTR_SMT))
-		sysdev_remove_file(s, &attr_smt_snooze_delay);
+		device_remove_file(s, &dev_attr_smt_snooze_delay);
 #endif
 
 	/* PMC stuff */
@@ -418,14 +424,14 @@ static void unregister_cpu_online(unsigned int cpu)
 #ifdef HAS_PPC_PMC_IBM
 	case PPC_PMC_IBM:
 		attrs = ibm_common_attrs;
-		nattrs = sizeof(ibm_common_attrs) / sizeof(struct sysdev_attribute);
+		nattrs = sizeof(ibm_common_attrs) / sizeof(struct device_attribute);
 		pmc_attrs = classic_pmc_attrs;
 		break;
 #endif /* HAS_PPC_PMC_IBM */
 #ifdef HAS_PPC_PMC_G4
 	case PPC_PMC_G4:
 		attrs = g4_common_attrs;
-		nattrs = sizeof(g4_common_attrs) / sizeof(struct sysdev_attribute);
+		nattrs = sizeof(g4_common_attrs) / sizeof(struct device_attribute);
 		pmc_attrs = classic_pmc_attrs;
 		break;
 #endif /* HAS_PPC_PMC_G4 */
@@ -433,7 +439,7 @@ static void unregister_cpu_online(unsigned int cpu)
 	case PPC_PMC_PA6T:
 		/* PA Semi starts counting at PMC0 */
 		attrs = pa6t_attrs;
-		nattrs = sizeof(pa6t_attrs) / sizeof(struct sysdev_attribute);
+		nattrs = sizeof(pa6t_attrs) / sizeof(struct device_attribute);
 		pmc_attrs = NULL;
 		break;
 #endif /* HAS_PPC_PMC_PA6T */
@@ -444,24 +450,27 @@ static void unregister_cpu_online(unsigned int cpu)
 	}
 
 	for (i = 0; i < nattrs; i++)
-		sysdev_remove_file(s, &attrs[i]);
+		device_remove_file(s, &attrs[i]);
 
 	if (pmc_attrs)
 		for (i = 0; i < cur_cpu_spec->num_pmcs; i++)
-			sysdev_remove_file(s, &pmc_attrs[i]);
+			device_remove_file(s, &pmc_attrs[i]);
 
 #ifdef CONFIG_PPC64
 	if (cpu_has_feature(CPU_FTR_MMCRA))
-		sysdev_remove_file(s, &attr_mmcra);
+		device_remove_file(s, &dev_attr_mmcra);
 
 	if (cpu_has_feature(CPU_FTR_PURR))
-		sysdev_remove_file(s, &attr_purr);
+		device_remove_file(s, &dev_attr_purr);
 
 	if (cpu_has_feature(CPU_FTR_SPURR))
-		sysdev_remove_file(s, &attr_spurr);
+		device_remove_file(s, &dev_attr_spurr);
 
 	if (cpu_has_feature(CPU_FTR_DSCR))
-		sysdev_remove_file(s, &attr_dscr);
+		device_remove_file(s, &dev_attr_dscr);
+
+	if (cpu_has_feature(CPU_FTR_PPCAS_ARCH_V2))
+		device_remove_file(s, &dev_attr_pir);
 #endif /* CONFIG_PPC64 */
 
 	cacheinfo_cpu_offline(cpu);
@@ -513,70 +522,70 @@ static struct notifier_block __cpuinitdata sysfs_cpu_nb = {
 
 static DEFINE_MUTEX(cpu_mutex);
 
-int cpu_add_sysdev_attr(struct sysdev_attribute *attr)
+int cpu_add_dev_attr(struct device_attribute *attr)
 {
 	int cpu;
 
 	mutex_lock(&cpu_mutex);
 
 	for_each_possible_cpu(cpu) {
-		sysdev_create_file(get_cpu_sysdev(cpu), attr);
+		device_create_file(get_cpu_device(cpu), attr);
 	}
 
 	mutex_unlock(&cpu_mutex);
 	return 0;
 }
-EXPORT_SYMBOL_GPL(cpu_add_sysdev_attr);
+EXPORT_SYMBOL_GPL(cpu_add_dev_attr);
 
-int cpu_add_sysdev_attr_group(struct attribute_group *attrs)
+int cpu_add_dev_attr_group(struct attribute_group *attrs)
 {
 	int cpu;
-	struct sys_device *sysdev;
+	struct device *dev;
 	int ret;
 
 	mutex_lock(&cpu_mutex);
 
 	for_each_possible_cpu(cpu) {
-		sysdev = get_cpu_sysdev(cpu);
-		ret = sysfs_create_group(&sysdev->kobj, attrs);
+		dev = get_cpu_device(cpu);
+		ret = sysfs_create_group(&dev->kobj, attrs);
 		WARN_ON(ret != 0);
 	}
 
 	mutex_unlock(&cpu_mutex);
 	return 0;
 }
-EXPORT_SYMBOL_GPL(cpu_add_sysdev_attr_group);
+EXPORT_SYMBOL_GPL(cpu_add_dev_attr_group);
 
 
-void cpu_remove_sysdev_attr(struct sysdev_attribute *attr)
+void cpu_remove_dev_attr(struct device_attribute *attr)
 {
 	int cpu;
 
 	mutex_lock(&cpu_mutex);
 
 	for_each_possible_cpu(cpu) {
-		sysdev_remove_file(get_cpu_sysdev(cpu), attr);
+		device_remove_file(get_cpu_device(cpu), attr);
 	}
 
 	mutex_unlock(&cpu_mutex);
 }
-EXPORT_SYMBOL_GPL(cpu_remove_sysdev_attr);
+EXPORT_SYMBOL_GPL(cpu_remove_dev_attr);
 
-void cpu_remove_sysdev_attr_group(struct attribute_group *attrs)
+void cpu_remove_dev_attr_group(struct attribute_group *attrs)
 {
 	int cpu;
-	struct sys_device *sysdev;
+	struct device *dev;
 
 	mutex_lock(&cpu_mutex);
 
 	for_each_possible_cpu(cpu) {
-		sysdev = get_cpu_sysdev(cpu);
-		sysfs_remove_group(&sysdev->kobj, attrs);
+		dev = get_cpu_device(cpu);
+		sysfs_remove_group(&dev->kobj, attrs);
 	}
 
 	mutex_unlock(&cpu_mutex);
 }
-EXPORT_SYMBOL_GPL(cpu_remove_sysdev_attr_group);
+EXPORT_SYMBOL_GPL(cpu_remove_dev_attr_group);
 
 
 /* NUMA stuff */
@@ -590,18 +599,18 @@ static void register_nodes(void)
 		register_one_node(i);
 }
 
-int sysfs_add_device_to_node(struct sys_device *dev, int nid)
+int sysfs_add_device_to_node(struct device *dev, int nid)
 {
 	struct node *node = &node_devices[nid];
-	return sysfs_create_link(&node->sysdev.kobj, &dev->kobj,
+	return sysfs_create_link(&node->dev.kobj, &dev->kobj,
 			kobject_name(&dev->kobj));
 }
 EXPORT_SYMBOL_GPL(sysfs_add_device_to_node);
 
-void sysfs_remove_device_from_node(struct sys_device *dev, int nid)
+void sysfs_remove_device_from_node(struct device *dev, int nid)
 {
 	struct node *node = &node_devices[nid];
-	sysfs_remove_link(&node->sysdev.kobj, kobject_name(&dev->kobj));
+	sysfs_remove_link(&node->dev.kobj, kobject_name(&dev->kobj));
 }
 EXPORT_SYMBOL_GPL(sysfs_remove_device_from_node);
 
@@ -614,14 +623,14 @@ static void register_nodes(void)
 #endif
 
 /* Only valid if CPU is present. */
-static ssize_t show_physical_id(struct sys_device *dev,
-				struct sysdev_attribute *attr, char *buf)
+static ssize_t show_physical_id(struct device *dev,
+				struct device_attribute *attr, char *buf)
 {
-	struct cpu *cpu = container_of(dev, struct cpu, sysdev);
+	struct cpu *cpu = container_of(dev, struct cpu, dev);
 
-	return sprintf(buf, "%d\n", get_hard_smp_processor_id(cpu->sysdev.id));
+	return sprintf(buf, "%d\n", get_hard_smp_processor_id(cpu->dev.id));
 }
-static SYSDEV_ATTR(physical_id, 0444, show_physical_id, NULL);
+static DEVICE_ATTR(physical_id, 0444, show_physical_id, NULL);
 
 static int __init topology_init(void)
 {
@@ -646,7 +655,7 @@ static int __init topology_init(void)
 		if (cpu_online(cpu) || c->hotpluggable) {
 			register_cpu(c, cpu);
 
-			sysdev_create_file(&c->sysdev, &attr_physical_id);
+			device_create_file(&c->dev, &dev_attr_physical_id);
 		}
 
 		if (cpu_online(cpu))
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 522bb1d..567dd7c 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -86,8 +86,6 @@ static struct clocksource clocksource_rtc = {
 	.rating       = 400,
 	.flags        = CLOCK_SOURCE_IS_CONTINUOUS,
 	.mask         = CLOCKSOURCE_MASK(64),
-	.shift        = 22,
-	.mult         = 0,	/* To be filled in */
 	.read         = rtc_read,
 };
 
@@ -97,8 +95,6 @@ static struct clocksource clocksource_timebase = {
 	.rating       = 400,
 	.flags        = CLOCK_SOURCE_IS_CONTINUOUS,
 	.mask         = CLOCKSOURCE_MASK(64),
-	.shift        = 22,
-	.mult         = 0,	/* To be filled in */
 	.read         = timebase_read,
 };
 
@@ -110,22 +106,16 @@ static void decrementer_set_mode(enum clock_event_mode mode,
 				 struct clock_event_device *dev);
 
 static struct clock_event_device decrementer_clockevent = {
-       .name           = "decrementer",
-       .rating         = 200,
-       .shift          = 0,	/* To be filled in */
-       .mult           = 0,	/* To be filled in */
-       .irq            = 0,
-       .set_next_event = decrementer_set_next_event,
-       .set_mode       = decrementer_set_mode,
-       .features       = CLOCK_EVT_FEAT_ONESHOT,
+	.name           = "decrementer",
+	.rating         = 200,
+	.irq            = 0,
+	.set_next_event = decrementer_set_next_event,
+	.set_mode       = decrementer_set_mode,
+	.features       = CLOCK_EVT_FEAT_ONESHOT,
 };
 
-struct decrementer_clock {
-	struct clock_event_device event;
-	u64 next_tb;
-};
-
-static DEFINE_PER_CPU(struct decrementer_clock, decrementers);
+DEFINE_PER_CPU(u64, decrementers_next_tb);
+static DEFINE_PER_CPU(struct clock_event_device, decrementers);
 
 #ifdef CONFIG_PPC_ISERIES
 static unsigned long __initdata iSeries_recal_titan;
@@ -168,13 +158,13 @@ EXPORT_SYMBOL_GPL(ppc_tb_freq);
 #ifdef CONFIG_VIRT_CPU_ACCOUNTING
 /*
  * Factors for converting from cputime_t (timebase ticks) to
- * jiffies, milliseconds, seconds, and clock_t (1/USER_HZ seconds).
+ * jiffies, microseconds, seconds, and clock_t (1/USER_HZ seconds).
  * These are all stored as 0.64 fixed-point binary fractions.
  */
 u64 __cputime_jiffies_factor;
 EXPORT_SYMBOL(__cputime_jiffies_factor);
-u64 __cputime_msec_factor;
-EXPORT_SYMBOL(__cputime_msec_factor);
+u64 __cputime_usec_factor;
+EXPORT_SYMBOL(__cputime_usec_factor);
 u64 __cputime_sec_factor;
 EXPORT_SYMBOL(__cputime_sec_factor);
 u64 __cputime_clockt_factor;
@@ -192,8 +182,8 @@ static void calc_cputime_factors(void)
 
 	div128_by_32(HZ, 0, tb_ticks_per_sec, &res);
 	__cputime_jiffies_factor = res.result_low;
-	div128_by_32(1000, 0, tb_ticks_per_sec, &res);
-	__cputime_msec_factor = res.result_low;
+	div128_by_32(1000000, 0, tb_ticks_per_sec, &res);
+	__cputime_usec_factor = res.result_low;
 	div128_by_32(1, 0, tb_ticks_per_sec, &res);
 	__cputime_sec_factor = res.result_low;
 	div128_by_32(USER_HZ, 0, tb_ticks_per_sec, &res);
@@ -441,7 +431,7 @@ EXPORT_SYMBOL(profile_pc);
 /* 
  * This function recalibrates the timebase based on the 49-bit time-of-day
  * value in the Titan chip.  The Titan is much more accurate than the value
- * returned by the service processor for the timebase frequency.  
+ * returned by the service processor for the timebase frequency.
  */
 
 static int __init iSeries_tb_recal(void)
@@ -576,9 +566,8 @@ void arch_irq_work_raise(void)
 void timer_interrupt(struct pt_regs * regs)
 {
 	struct pt_regs *old_regs;
-	struct decrementer_clock *decrementer =  &__get_cpu_var(decrementers);
-	struct clock_event_device *evt = &decrementer->event;
-	u64 now;
+	u64 *next_tb = &__get_cpu_var(decrementers_next_tb);
+	struct clock_event_device *evt = &__get_cpu_var(decrementers);
 
 	/* Ensure a positive value is written to the decrementer, or else
 	 * some CPUs will continue to take decrementer exceptions.
@@ -613,16 +602,9 @@ void timer_interrupt(struct pt_regs * regs)
 		get_lppaca()->int_dword.fields.decr_int = 0;
 #endif
 
-	now = get_tb_or_rtc();
-	if (now >= decrementer->next_tb) {
-		decrementer->next_tb = ~(u64)0;
-		if (evt->event_handler)
-			evt->event_handler(evt);
-	} else {
-		now = decrementer->next_tb - now;
-		if (now <= DECREMENTER_MAX)
-			set_dec((int)now);
-	}
+	*next_tb = ~(u64)0;
+	if (evt->event_handler)
+		evt->event_handler(evt);
 
 #ifdef CONFIG_PPC_ISERIES
 	if (firmware_has_feature(FW_FEATURE_ISERIES) && hvlpevent_is_pending())
@@ -650,9 +632,9 @@ static void generic_suspend_disable_irqs(void)
 	 * with suspending.
 	 */
 
-	set_dec(0x7fffffff);
+	set_dec(DECREMENTER_MAX);
 	local_irq_disable();
-	set_dec(0x7fffffff);
+	set_dec(DECREMENTER_MAX);
 }
 
 static void generic_suspend_enable_irqs(void)
@@ -824,9 +806,8 @@ void update_vsyscall(struct timespec *wall_time, struct timespec *wtm,
 	++vdso_data->tb_update_count;
 	smp_mb();
 
-	/* XXX this assumes clock->shift == 22 */
-	/* 4611686018 ~= 2^(20+64-22) / 1e9 */
-	new_tb_to_xs = (u64) mult * 4611686018ULL;
+	/* 19342813113834067 ~= 2^(20+64) / 1e9 */
+	new_tb_to_xs = (u64) mult * (19342813113834067ULL >> clock->shift);
 	new_stamp_xsec = (u64) wall_time->tv_nsec * XSEC_PER_SEC;
 	do_div(new_stamp_xsec, 1000000000);
 	new_stamp_xsec += (u64) wall_time->tv_sec * XSEC_PER_SEC;
@@ -877,9 +858,7 @@ static void __init clocksource_init(void)
 	else
 		clock = &clocksource_timebase;
 
-	clock->mult = clocksource_hz2mult(tb_ticks_per_sec, clock->shift);
-
-	if (clocksource_register(clock)) {
+	if (clocksource_register_hz(clock, tb_ticks_per_sec)) {
 		printk(KERN_ERR "clocksource: %s is already registered\n",
 		       clock->name);
 		return;
@@ -892,7 +871,7 @@ static void __init clocksource_init(void)
 static int decrementer_set_next_event(unsigned long evt,
 				      struct clock_event_device *dev)
 {
-	__get_cpu_var(decrementers).next_tb = get_tb_or_rtc() + evt;
+	__get_cpu_var(decrementers_next_tb) = get_tb_or_rtc() + evt;
 	set_dec(evt);
 	return 0;
 }
@@ -904,34 +883,9 @@ static void decrementer_set_mode(enum clock_event_mode mode,
 		decrementer_set_next_event(DECREMENTER_MAX, dev);
 }
 
-static inline uint64_t div_sc64(unsigned long ticks, unsigned long nsec,
-				int shift)
-{
-	uint64_t tmp = ((uint64_t)ticks) << shift;
-
-	do_div(tmp, nsec);
-	return tmp;
-}
-
-static void __init setup_clockevent_multiplier(unsigned long hz)
-{
-	u64 mult, shift = 32;
-
-	while (1) {
-		mult = div_sc64(hz, NSEC_PER_SEC, shift);
-		if (mult && (mult >> 32UL) == 0UL)
-			break;
-
-		shift--;
-	}
-
-	decrementer_clockevent.shift = shift;
-	decrementer_clockevent.mult = mult;
-}
-
 static void register_decrementer_clockevent(int cpu)
 {
-	struct clock_event_device *dec = &per_cpu(decrementers, cpu).event;
+	struct clock_event_device *dec = &per_cpu(decrementers, cpu);
 
 	*dec = decrementer_clockevent;
 	dec->cpumask = cpumask_of(cpu);
@@ -946,7 +900,8 @@ static void __init init_decrementer_clockevent(void)
 {
 	int cpu = smp_processor_id();
 
-	setup_clockevent_multiplier(ppc_tb_freq);
+	clockevents_calc_mult_shift(&decrementer_clockevent, ppc_tb_freq, 4);
+
 	decrementer_clockevent.max_delta_ns =
 		clockevent_delta2ns(DECREMENTER_MAX, &decrementer_clockevent);
 	decrementer_clockevent.min_delta_ns =
@@ -1014,10 +969,10 @@ void __init time_init(void)
 	boot_tb = get_tb_or_rtc();
 
 	/* If platform provided a timezone (pmac), we correct the time */
-        if (timezone_offset) {
+	if (timezone_offset) {
 		sys_tz.tz_minuteswest = -timezone_offset / 60;
 		sys_tz.tz_dsttime = 0;
-        }
+	}
 
 	vdso_data->tb_update_count = 0;
 	vdso_data->tb_ticks_per_sec = tb_ticks_per_sec;
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 5459d14..c091527 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -98,18 +98,14 @@ static void pmac_backlight_unblank(void)
 static inline void pmac_backlight_unblank(void) { }
 #endif
 
-int die(const char *str, struct pt_regs *regs, long err)
+static arch_spinlock_t die_lock = __ARCH_SPIN_LOCK_UNLOCKED;
+static int die_owner = -1;
+static unsigned int die_nest_count;
+static int die_counter;
+
+static unsigned __kprobes long oops_begin(struct pt_regs *regs)
 {
-	static struct {
-		raw_spinlock_t lock;
-		u32 lock_owner;
-		int lock_owner_depth;
-	} die = {
-		.lock =			__RAW_SPIN_LOCK_UNLOCKED(die.lock),
-		.lock_owner =		-1,
-		.lock_owner_depth =	0
-	};
-	static int die_counter;
+	int cpu;
 	unsigned long flags;
 
 	if (debugger(regs))
@@ -117,66 +113,109 @@ int die(const char *str, struct pt_regs *regs, long err)
 
 	oops_enter();
 
-	if (die.lock_owner != raw_smp_processor_id()) {
-		console_verbose();
-		raw_spin_lock_irqsave(&die.lock, flags);
-		die.lock_owner = smp_processor_id();
-		die.lock_owner_depth = 0;
-		bust_spinlocks(1);
-		if (machine_is(powermac))
-			pmac_backlight_unblank();
-	} else {
-		local_save_flags(flags);
+	/* racy, but better than risking deadlock. */
+	raw_local_irq_save(flags);
+	cpu = smp_processor_id();
+	if (!arch_spin_trylock(&die_lock)) {
+		if (cpu == die_owner)
+			/* nested oops. should stop eventually */;
+		else
+			arch_spin_lock(&die_lock);
 	}
+	die_nest_count++;
+	die_owner = cpu;
+	console_verbose();
+	bust_spinlocks(1);
+	if (machine_is(powermac))
+		pmac_backlight_unblank();
+	return flags;
+}
 
-	if (++die.lock_owner_depth < 3) {
-		printk("Oops: %s, sig: %ld [#%d]\n", str, err, ++die_counter);
-#ifdef CONFIG_PREEMPT
-		printk("PREEMPT ");
-#endif
-#ifdef CONFIG_SMP
-		printk("SMP NR_CPUS=%d ", NR_CPUS);
-#endif
-#ifdef CONFIG_DEBUG_PAGEALLOC
-		printk("DEBUG_PAGEALLOC ");
-#endif
-#ifdef CONFIG_NUMA
-		printk("NUMA ");
-#endif
-		printk("%s\n", ppc_md.name ? ppc_md.name : "");
+static void __kprobes oops_end(unsigned long flags, struct pt_regs *regs,
+			       int signr)
+{
+	bust_spinlocks(0);
+	die_owner = -1;
+	add_taint(TAINT_DIE);
+	die_nest_count--;
+	oops_exit();
+	printk("\n");
+	if (!die_nest_count)
+		/* Nest count reaches zero, release the lock. */
+		arch_spin_unlock(&die_lock);
+	raw_local_irq_restore(flags);
 
-		if (notify_die(DIE_OOPS, str, regs, err, 255,
-			       SIGSEGV) == NOTIFY_STOP)
-			return 1;
+	/*
+	 * A system reset (0x100) is a request to dump, so we always send
+	 * it through the crashdump code.
+	 */
+	if (kexec_should_crash(current) || (TRAP(regs) == 0x100)) {
+		crash_kexec(regs);
 
-		print_modules();
-		show_regs(regs);
-	} else {
-		printk("Recursive die() failure, output suppressed\n");
+		/*
+		 * We aren't the primary crash CPU. We need to send it
+		 * to a holding pattern to avoid it ending up in the panic
+		 * code.
+		 */
+		crash_kexec_secondary(regs);
 	}
 
-	bust_spinlocks(0);
-	die.lock_owner = -1;
-	add_taint(TAINT_DIE);
-	raw_spin_unlock_irqrestore(&die.lock, flags);
+	if (!signr)
+		return;
 
-	if (kexec_should_crash(current) ||
-		kexec_sr_activated(smp_processor_id()))
-		crash_kexec(regs);
-	crash_kexec_secondary(regs);
+	/*
+	 * While our oops output is serialised by a spinlock, output
+	 * from panic() called below can race and corrupt it. If we
+	 * know we are going to panic, delay for 1 second so we have a
+	 * chance to get clean backtraces from all CPUs that are oopsing.
+	 */
+	if (in_interrupt() || panic_on_oops || !current->pid ||
+	    is_global_init(current)) {
+		mdelay(MSEC_PER_SEC);
+	}
 
 	if (in_interrupt())
 		panic("Fatal exception in interrupt");
-
 	if (panic_on_oops)
 		panic("Fatal exception");
+	do_exit(signr);
+}
 
-	oops_exit();
-	do_exit(err);
+static int __kprobes __die(const char *str, struct pt_regs *regs, long err)
+{
+	printk("Oops: %s, sig: %ld [#%d]\n", str, err, ++die_counter);
+#ifdef CONFIG_PREEMPT
+	printk("PREEMPT ");
+#endif
+#ifdef CONFIG_SMP
+	printk("SMP NR_CPUS=%d ", NR_CPUS);
+#endif
+#ifdef CONFIG_DEBUG_PAGEALLOC
+	printk("DEBUG_PAGEALLOC ");
+#endif
+#ifdef CONFIG_NUMA
+	printk("NUMA ");
+#endif
+	printk("%s\n", ppc_md.name ? ppc_md.name : "");
+
+	if (notify_die(DIE_OOPS, str, regs, err, 255, SIGSEGV) == NOTIFY_STOP)
+		return 1;
+
+	print_modules();
+	show_regs(regs);
 
 	return 0;
 }
 
+void die(const char *str, struct pt_regs *regs, long err)
+{
+	unsigned long flags = oops_begin(regs);
+
+	if (__die(str, regs, err))
+		err = 0;
+	oops_end(flags, regs, err);
+}
+
 void user_single_step_siginfo(struct task_struct *tsk,
 				struct pt_regs *regs, siginfo_t *info)
 {
@@ -195,10 +234,11 @@ void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr)
 			"at %016lx nip %016lx lr %016lx code %x\n";
 
 	if (!user_mode(regs)) {
-		if (die("Exception in kernel mode", regs, signr))
-			return;
-	} else if (show_unhandled_signals &&
-		   unhandled_signal(current, signr)) {
+		die("Exception in kernel mode", regs, signr);
+		return;
+	}
+
+	if (show_unhandled_signals && unhandled_signal(current, signr)) {
 		printk_ratelimited(regs->msr & MSR_64BIT ? fmt64 : fmt32,
 				   current->comm, current->pid, signr,
 				   addr, regs->nip, regs->link, code);
@@ -220,25 +260,8 @@ void system_reset_exception(struct pt_regs *regs)
 			return;
 	}
 
-#ifdef CONFIG_KEXEC
-	cpumask_set_cpu(smp_processor_id(), &cpus_in_sr);
-#endif
-
 	die("System Reset", regs, SIGABRT);
 
-	/*
-	 * Some CPUs when released from the debugger will execute this path.
-	 * These CPUs entered the debugger via a soft-reset. If the CPU was
-	 * hung before entering the debugger it will return to the hung
-	 * state when exiting this function.  This causes a problem in
-	 * kdump since the hung CPU(s) will not respond to the IPI sent
-	 * from kdump. To prevent the problem we call crash_kexec_secondary()
-	 * here. If a kdump had not been initiated or we exit the debugger
-	 * with the "exit and recover" command (x) crash_kexec_secondary()
-	 * will return after 5ms and the CPU returns to its previous state.
-	 */
-	crash_kexec_secondary(regs);
-
 	/* Must die if the interrupt is not recoverable */
 	if (!(regs->msr & MSR_RI))
 		panic("Unrecoverable System Reset");
diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
index f65af61..8b08629 100644
--- a/arch/powerpc/kernel/vio.c
+++ b/arch/powerpc/kernel/vio.c
@@ -1406,7 +1406,6 @@ static struct bus_type vio_bus_type = {
 	.match = vio_bus_match,
 	.probe = vio_bus_probe,
 	.remove = vio_bus_remove,
-	.pm = GENERIC_SUBSYS_PM_OPS,
 };
 
 /**
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 920276c..710a540 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -170,7 +170,13 @@ SECTIONS
 	}
 #ifdef CONFIG_RELOCATABLE
 	. = ALIGN(8);
-	.dynsym : AT(ADDR(.dynsym) - LOAD_OFFSET) { *(.dynsym) }
+	.dynsym : AT(ADDR(.dynsym) - LOAD_OFFSET)
+	{
+#ifdef CONFIG_RELOCATABLE_PPC32
+		__dynamic_symtab = .;
+#endif
+		*(.dynsym)
+	}
 	.dynstr : AT(ADDR(.dynstr) - LOAD_OFFSET) { *(.dynstr) }
 	.dynamic : AT(ADDR(.dynamic) - LOAD_OFFSET)
 	{
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 0cb137a..336983d 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -538,7 +538,7 @@ static void kvmppc_start_thread(struct kvm_vcpu *vcpu)
 	tpaca->kvm_hstate.napping = 0;
 	vcpu->cpu = vc->pcpu;
 	smp_wmb();
-#ifdef CONFIG_PPC_ICP_NATIVE
+#if defined(CONFIG_PPC_ICP_NATIVE) && defined(CONFIG_SMP)
 	if (vcpu->arch.ptid) {
 		tpaca->cpu_start = 0x80;
 		wmb();
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index 44d8829..5c8b261 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -112,6 +112,9 @@ kvm_start_guest:
 	stbcix	r0, r5, r6		/* clear it */
 	stwcix	r8, r5, r7		/* EOI it */
 
+	/* NV GPR values from power7_idle() will no longer be valid */
+	stb	r0, PACA_NAPSTATELOST(r13)
+
 .global kvmppc_hv_entry
 kvmppc_hv_entry:
 
diff --git a/arch/powerpc/kvm/book3s_pr.c b/arch/powerpc/kvm/book3s_pr.c
index 3c791e1..e2cfb9e 100644
--- a/arch/powerpc/kvm/book3s_pr.c
+++ b/arch/powerpc/kvm/book3s_pr.c
@@ -658,10 +658,12 @@ program_interrupt:
 			ulong cmd = kvmppc_get_gpr(vcpu, 3);
 			int i;
 
+#ifdef CONFIG_KVM_BOOK3S_64_PR
 			if (kvmppc_h_pr(vcpu, cmd) == EMULATE_DONE) {
 				r = RESUME_GUEST;
 				break;
 			}
+#endif
 
 			run->papr_hcall.nr = cmd;
 			for (i = 0; i < 9; ++i) {
diff --git a/arch/powerpc/kvm/e500.c b/arch/powerpc/kvm/e500.c
index 26d20903..8c0d45a 100644
--- a/arch/powerpc/kvm/e500.c
+++ b/arch/powerpc/kvm/e500.c
@@ -15,6 +15,7 @@
 #include <linux/kvm_host.h>
 #include <linux/slab.h>
 #include <linux/err.h>
+#include <linux/export.h>
 
 #include <asm/reg.h>
 #include <asm/cputable.h>
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index 166a6a0..7735a2c 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -16,13 +16,15 @@ obj-$(CONFIG_HAS_IOMEM)	+= devres.o
 
 obj-$(CONFIG_PPC64)	+= copypage_64.o copyuser_64.o \
 			   memcpy_64.o usercopy_64.o mem_64.o string.o \
-			   checksum_wrappers_64.o hweight_64.o
+			   checksum_wrappers_64.o hweight_64.o \
+			   copyuser_power7.o
 obj-$(CONFIG_XMON)	+= sstep.o ldstfp.o
 obj-$(CONFIG_KPROBES)	+= sstep.o ldstfp.o
 obj-$(CONFIG_HAVE_HW_BREAKPOINT)	+= sstep.o ldstfp.o
 
 ifeq ($(CONFIG_PPC64),y)
 obj-$(CONFIG_SMP)	+= locks.o
+obj-$(CONFIG_ALTIVEC)	+= copyuser_power7_vmx.o
 endif
 
 obj-$(CONFIG_PPC_LIB_RHEAP) += rheap.o
diff --git a/arch/powerpc/lib/copyuser_64.S b/arch/powerpc/lib/copyuser_64.S
index 578b625..773d38f 100644
--- a/arch/powerpc/lib/copyuser_64.S
+++ b/arch/powerpc/lib/copyuser_64.S
@@ -11,6 +11,12 @@
 
 	.align	7
 _GLOBAL(__copy_tofrom_user)
+BEGIN_FTR_SECTION
+	nop
+FTR_SECTION_ELSE
+	b	__copy_tofrom_user_power7
+ALT_FTR_SECTION_END_IFCLR(CPU_FTR_VMX_COPY)
+_GLOBAL(__copy_tofrom_user_base)
 	/* first check for a whole page copy on a page boundary */
 	cmpldi	cr1,r5,16
 	cmpdi	cr6,r5,4096
diff --git a/arch/powerpc/lib/copyuser_power7.S b/arch/powerpc/lib/copyuser_power7.S
new file mode 100644
index 0000000..497db7b
--- /dev/null
+++ b/arch/powerpc/lib/copyuser_power7.S
@@ -0,0 +1,683 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2011
+ *
+ * Author: Anton Blanchard <anton@au.ibm.com>
+ */
+#include <asm/ppc_asm.h>
+
+#define STACKFRAMESIZE	256
+#define STK_REG(i)	(112 + ((i)-14)*8)
+
+	.macro err1
+100:
+	.section __ex_table,"a"
+	.align 3
+	.llong 100b,.Ldo_err1
+	.previous
+	.endm
+
+	.macro err2
+200:
+	.section __ex_table,"a"
+	.align 3
+	.llong 200b,.Ldo_err2
+	.previous
+	.endm
+
+#ifdef CONFIG_ALTIVEC
+	.macro err3
+300:
+	.section __ex_table,"a"
+	.align 3
+	.llong 300b,.Ldo_err3
+	.previous
+	.endm
+
+	.macro err4
+400:
+	.section __ex_table,"a"
+	.align 3
+	.llong 400b,.Ldo_err4
+	.previous
+	.endm
+
+
+.Ldo_err4:
+	ld	r16,STK_REG(r16)(r1)
+	ld	r15,STK_REG(r15)(r1)
+	ld	r14,STK_REG(r14)(r1)
+.Ldo_err3:
+	bl	.exit_vmx_copy
+	ld	r0,STACKFRAMESIZE+16(r1)
+	mtlr	r0
+	b	.Lexit
+#endif /* CONFIG_ALTIVEC */
+
+.Ldo_err2:
+	ld	r22,STK_REG(r22)(r1)
+	ld	r21,STK_REG(r21)(r1)
+	ld	r20,STK_REG(r20)(r1)
+	ld	r19,STK_REG(r19)(r1)
+	ld	r18,STK_REG(r18)(r1)
+	ld	r17,STK_REG(r17)(r1)
+	ld	r16,STK_REG(r16)(r1)
+	ld	r15,STK_REG(r15)(r1)
+	ld	r14,STK_REG(r14)(r1)
+.Lexit:
+	addi	r1,r1,STACKFRAMESIZE
+.Ldo_err1:
+	ld	r3,48(r1)
+	ld	r4,56(r1)
+	ld	r5,64(r1)
+	b	__copy_tofrom_user_base
+
+
+_GLOBAL(__copy_tofrom_user_power7)
+#ifdef CONFIG_ALTIVEC
+	cmpldi	r5,16
+	cmpldi	cr1,r5,4096
+
+	std	r3,48(r1)
+	std	r4,56(r1)
+	std	r5,64(r1)
+
+	blt	.Lshort_copy
+	bgt	cr1,.Lvmx_copy
+#else
+	cmpldi	r5,16
+
+	std	r3,48(r1)
+	std	r4,56(r1)
+	std	r5,64(r1)
+
+	blt	.Lshort_copy
+#endif
+
+.Lnonvmx_copy:
+	/* Get the source 8B aligned */
+	neg	r6,r4
+	mtocrf	0x01,r6
+	clrldi	r6,r6,(64-3)
+
+	bf	cr7*4+3,1f
+err1;	lbz	r0,0(r4)
+	addi	r4,r4,1
+err1;	stb	r0,0(r3)
+	addi	r3,r3,1
+
+1:	bf	cr7*4+2,2f
+err1;	lhz	r0,0(r4)
+	addi	r4,r4,2
+err1;	sth	r0,0(r3)
+	addi	r3,r3,2
+
+2:	bf	cr7*4+1,3f
+err1;	lwz	r0,0(r4)
+	addi	r4,r4,4
+err1;	stw	r0,0(r3)
+	addi	r3,r3,4
+
+3:	sub	r5,r5,r6
+	cmpldi	r5,128
+	blt	5f
+
+	mflr	r0
+	stdu	r1,-STACKFRAMESIZE(r1)
+	std	r14,STK_REG(r14)(r1)
+	std	r15,STK_REG(r15)(r1)
+	std	r16,STK_REG(r16)(r1)
+	std	r17,STK_REG(r17)(r1)
+	std	r18,STK_REG(r18)(r1)
+	std	r19,STK_REG(r19)(r1)
+	std	r20,STK_REG(r20)(r1)
+	std	r21,STK_REG(r21)(r1)
+	std	r22,STK_REG(r22)(r1)
+	std	r0,STACKFRAMESIZE+16(r1)
+
+	srdi	r6,r5,7
+	mtctr	r6
+
+	/* Now do cacheline (128B) sized loads and stores. */
+	.align	5
+4:
+err2;	ld	r0,0(r4)
+err2;	ld	r6,8(r4)
+err2;	ld	r7,16(r4)
+err2;	ld	r8,24(r4)
+err2;	ld	r9,32(r4)
+err2;	ld	r10,40(r4)
+err2;	ld	r11,48(r4)
+err2;	ld	r12,56(r4)
+err2;	ld	r14,64(r4)
+err2;	ld	r15,72(r4)
+err2;	ld	r16,80(r4)
+err2;	ld	r17,88(r4)
+err2;	ld	r18,96(r4)
+err2;	ld	r19,104(r4)
+err2;	ld	r20,112(r4)
+err2;	ld	r21,120(r4)
+	addi	r4,r4,128
+err2;	std	r0,0(r3)
+err2;	std	r6,8(r3)
+err2;	std	r7,16(r3)
+err2;	std	r8,24(r3)
+err2;	std	r9,32(r3)
+err2;	std	r10,40(r3)
+err2;	std	r11,48(r3)
+err2;	std	r12,56(r3)
+err2;	std	r14,64(r3)
+err2;	std	r15,72(r3)
+err2;	std	r16,80(r3)
+err2;	std	r17,88(r3)
+err2;	std	r18,96(r3)
+err2;	std	r19,104(r3)
+err2;	std	r20,112(r3)
+err2;	std	r21,120(r3)
+	addi	r3,r3,128
+	bdnz	4b
+
+	clrldi	r5,r5,(64-7)
+
+	ld	r14,STK_REG(r14)(r1)
+	ld	r15,STK_REG(r15)(r1)
+	ld	r16,STK_REG(r16)(r1)
+	ld	r17,STK_REG(r17)(r1)
+	ld	r18,STK_REG(r18)(r1)
+	ld	r19,STK_REG(r19)(r1)
+	ld	r20,STK_REG(r20)(r1)
+	ld	r21,STK_REG(r21)(r1)
+	ld	r22,STK_REG(r22)(r1)
+	addi	r1,r1,STACKFRAMESIZE
+
+	/* Up to 127B to go */
+5:	srdi	r6,r5,4
+	mtocrf	0x01,r6
+
+6:	bf	cr7*4+1,7f
+err1;	ld	r0,0(r4)
+err1;	ld	r6,8(r4)
+err1;	ld	r7,16(r4)
+err1;	ld	r8,24(r4)
+err1;	ld	r9,32(r4)
+err1;	ld	r10,40(r4)
+err1;	ld	r11,48(r4)
+err1;	ld	r12,56(r4)
+	addi	r4,r4,64
+err1;	std	r0,0(r3)
+err1;	std	r6,8(r3)
+err1;	std	r7,16(r3)
+err1;	std	r8,24(r3)
+err1;	std	r9,32(r3)
+err1;	std	r10,40(r3)
+err1;	std	r11,48(r3)
+err1;	std	r12,56(r3)
+	addi	r3,r3,64
+
+	/* Up to 63B to go */
+7:	bf	cr7*4+2,8f
+err1;	ld	r0,0(r4)
+err1;	ld	r6,8(r4)
+err1;	ld	r7,16(r4)
+err1;	ld	r8,24(r4)
+	addi	r4,r4,32
+err1;	std	r0,0(r3)
+err1;	std	r6,8(r3)
+err1;	std	r7,16(r3)
+err1;	std	r8,24(r3)
+	addi	r3,r3,32
+
+	/* Up to 31B to go */
+8:	bf	cr7*4+3,9f
+err1;	ld	r0,0(r4)
+err1;	ld	r6,8(r4)
+	addi	r4,r4,16
+err1;	std	r0,0(r3)
+err1;	std	r6,8(r3)
+	addi	r3,r3,16
+
+9:	clrldi	r5,r5,(64-4)
+
+	/* Up to 15B to go */
+.Lshort_copy:
+	mtocrf	0x01,r5
+	bf	cr7*4+0,12f
+err1;	lwz	r0,0(r4)	/* Less chance of a reject with word ops */
+err1;	lwz	r6,4(r4)
+	addi	r4,r4,8
+err1;	stw	r0,0(r3)
+err1;	stw	r6,4(r3)
+	addi	r3,r3,8
+
+12:	bf	cr7*4+1,13f
+err1;	lwz	r0,0(r4)
+	addi	r4,r4,4
+err1;	stw	r0,0(r3)
+	addi	r3,r3,4
+
+13:	bf	cr7*4+2,14f
+err1;	lhz	r0,0(r4)
+	addi	r4,r4,2
+err1;	sth	r0,0(r3)
+	addi	r3,r3,2
+
+14:	bf	cr7*4+3,15f
+err1;	lbz	r0,0(r4)
+err1;	stb	r0,0(r3)
+
+15:	li	r3,0
+	blr
+
+.Lunwind_stack_nonvmx_copy:
+	addi	r1,r1,STACKFRAMESIZE
+	b	.Lnonvmx_copy
+
+#ifdef CONFIG_ALTIVEC
+.Lvmx_copy:
+	mflr	r0
+	std	r0,16(r1)
+	stdu	r1,-STACKFRAMESIZE(r1)
+	bl	.enter_vmx_copy
+	cmpwi	r3,0
+	ld	r0,STACKFRAMESIZE+16(r1)
+	ld	r3,STACKFRAMESIZE+48(r1)
+	ld	r4,STACKFRAMESIZE+56(r1)
+	ld	r5,STACKFRAMESIZE+64(r1)
+	mtlr	r0
+
+	beq	.Lunwind_stack_nonvmx_copy
+
+	/*
+	 * If source and destination are not relatively aligned we use a
+	 * slower permute loop.
+	 */
+	xor	r6,r4,r3
+	rldicl.	r6,r6,0,(64-4)
+	bne	.Lvmx_unaligned_copy
+
+	/* Get the destination 16B aligned */
+	neg	r6,r3
+	mtocrf	0x01,r6
+	clrldi	r6,r6,(64-4)
+
+	bf	cr7*4+3,1f
+err3;	lbz	r0,0(r4)
+	addi	r4,r4,1
+err3;	stb	r0,0(r3)
+	addi	r3,r3,1
+
+1:	bf	cr7*4+2,2f
+err3;	lhz	r0,0(r4)
+	addi	r4,r4,2
+err3;	sth	r0,0(r3)
+	addi	r3,r3,2
+
+2:	bf	cr7*4+1,3f
+err3;	lwz	r0,0(r4)
+	addi	r4,r4,4
+err3;	stw	r0,0(r3)
+	addi	r3,r3,4
+
+3:	bf	cr7*4+0,4f
+err3;	ld	r0,0(r4)
+	addi	r4,r4,8
+err3;	std	r0,0(r3)
+	addi	r3,r3,8
+
+4:	sub	r5,r5,r6
+
+	/* Get the desination 128B aligned */
+	neg	r6,r3
+	srdi	r7,r6,4
+	mtocrf	0x01,r7
+	clrldi	r6,r6,(64-7)
+
+	li	r9,16
+	li	r10,32
+	li	r11,48
+
+	bf	cr7*4+3,5f
+err3;	lvx	vr1,r0,r4
+	addi	r4,r4,16
+err3;	stvx	vr1,r0,r3
+	addi	r3,r3,16
+
+5:	bf	cr7*4+2,6f
+err3;	lvx	vr1,r0,r4
+err3;	lvx	vr0,r4,r9
+	addi	r4,r4,32
+err3;	stvx	vr1,r0,r3
+err3;	stvx	vr0,r3,r9
+	addi	r3,r3,32
+
+6:	bf	cr7*4+1,7f
+err3;	lvx	vr3,r0,r4
+err3;	lvx	vr2,r4,r9
+err3;	lvx	vr1,r4,r10
+err3;	lvx	vr0,r4,r11
+	addi	r4,r4,64
+err3;	stvx	vr3,r0,r3
+err3;	stvx	vr2,r3,r9
+err3;	stvx	vr1,r3,r10
+err3;	stvx	vr0,r3,r11
+	addi	r3,r3,64
+
+7:	sub	r5,r5,r6
+	srdi	r6,r5,7
+
+	std	r14,STK_REG(r14)(r1)
+	std	r15,STK_REG(r15)(r1)
+	std	r16,STK_REG(r16)(r1)
+
+	li	r12,64
+	li	r14,80
+	li	r15,96
+	li	r16,112
+
+	mtctr	r6
+
+	/*
+	 * Now do cacheline sized loads and stores. By this stage the
+	 * cacheline stores are also cacheline aligned.
+	 */
+	.align	5
+8:
+err4;	lvx	vr7,r0,r4
+err4;	lvx	vr6,r4,r9
+err4;	lvx	vr5,r4,r10
+err4;	lvx	vr4,r4,r11
+err4;	lvx	vr3,r4,r12
+err4;	lvx	vr2,r4,r14
+err4;	lvx	vr1,r4,r15
+err4;	lvx	vr0,r4,r16
+	addi	r4,r4,128
+err4;	stvx	vr7,r0,r3
+err4;	stvx	vr6,r3,r9
+err4;	stvx	vr5,r3,r10
+err4;	stvx	vr4,r3,r11
+err4;	stvx	vr3,r3,r12
+err4;	stvx	vr2,r3,r14
+err4;	stvx	vr1,r3,r15
+err4;	stvx	vr0,r3,r16
+	addi	r3,r3,128
+	bdnz	8b
+
+	ld	r14,STK_REG(r14)(r1)
+	ld	r15,STK_REG(r15)(r1)
+	ld	r16,STK_REG(r16)(r1)
+
+	/* Up to 127B to go */
+	clrldi	r5,r5,(64-7)
+	srdi	r6,r5,4
+	mtocrf	0x01,r6
+
+	bf	cr7*4+1,9f
+err3;	lvx	vr3,r0,r4
+err3;	lvx	vr2,r4,r9
+err3;	lvx	vr1,r4,r10
+err3;	lvx	vr0,r4,r11
+	addi	r4,r4,64
+err3;	stvx	vr3,r0,r3
+err3;	stvx	vr2,r3,r9
+err3;	stvx	vr1,r3,r10
+err3;	stvx	vr0,r3,r11
+	addi	r3,r3,64
+
+9:	bf	cr7*4+2,10f
+err3;	lvx	vr1,r0,r4
+err3;	lvx	vr0,r4,r9
+	addi	r4,r4,32
+err3;	stvx	vr1,r0,r3
+err3;	stvx	vr0,r3,r9
+	addi	r3,r3,32
+
+10:	bf	cr7*4+3,11f
+err3;	lvx	vr1,r0,r4
+	addi	r4,r4,16
+err3;	stvx	vr1,r0,r3
+	addi	r3,r3,16
+
+	/* Up to 15B to go */
+11:	clrldi	r5,r5,(64-4)
+	mtocrf	0x01,r5
+	bf	cr7*4+0,12f
+err3;	ld	r0,0(r4)
+	addi	r4,r4,8
+err3;	std	r0,0(r3)
+	addi	r3,r3,8
+
+12:	bf	cr7*4+1,13f
+err3;	lwz	r0,0(r4)
+	addi	r4,r4,4
+err3;	stw	r0,0(r3)
+	addi	r3,r3,4
+
+13:	bf	cr7*4+2,14f
+err3;	lhz	r0,0(r4)
+	addi	r4,r4,2
+err3;	sth	r0,0(r3)
+	addi	r3,r3,2
+
+14:	bf	cr7*4+3,15f
+err3;	lbz	r0,0(r4)
+err3;	stb	r0,0(r3)
+
+15:	addi	r1,r1,STACKFRAMESIZE
+	b	.exit_vmx_copy		/* tail call optimise */
+
+.Lvmx_unaligned_copy:
+	/* Get the destination 16B aligned */
+	neg	r6,r3
+	mtocrf	0x01,r6
+	clrldi	r6,r6,(64-4)
+
+	bf	cr7*4+3,1f
+err3;	lbz	r0,0(r4)
+	addi	r4,r4,1
+err3;	stb	r0,0(r3)
+	addi	r3,r3,1
+
+1:	bf	cr7*4+2,2f
+err3;	lhz	r0,0(r4)
+	addi	r4,r4,2
+err3;	sth	r0,0(r3)
+	addi	r3,r3,2
+
+2:	bf	cr7*4+1,3f
+err3;	lwz	r0,0(r4)
+	addi	r4,r4,4
+err3;	stw	r0,0(r3)
+	addi	r3,r3,4
+
+3:	bf	cr7*4+0,4f
+err3;	lwz	r0,0(r4)	/* Less chance of a reject with word ops */
+err3;	lwz	r7,4(r4)
+	addi	r4,r4,8
+err3;	stw	r0,0(r3)
+err3;	stw	r7,4(r3)
+	addi	r3,r3,8
+
+4:	sub	r5,r5,r6
+
+	/* Get the desination 128B aligned */
+	neg	r6,r3
+	srdi	r7,r6,4
+	mtocrf	0x01,r7
+	clrldi	r6,r6,(64-7)
+
+	li	r9,16
+	li	r10,32
+	li	r11,48
+
+	lvsl	vr16,0,r4	/* Setup permute control vector */
+err3;	lvx	vr0,0,r4
+	addi	r4,r4,16
+
+	bf	cr7*4+3,5f
+err3;	lvx	vr1,r0,r4
+	vperm	vr8,vr0,vr1,vr16
+	addi	r4,r4,16
+err3;	stvx	vr8,r0,r3
+	addi	r3,r3,16
+	vor	vr0,vr1,vr1
+
+5:	bf	cr7*4+2,6f
+err3;	lvx	vr1,r0,r4
+	vperm	vr8,vr0,vr1,vr16
+err3;	lvx	vr0,r4,r9
+	vperm	vr9,vr1,vr0,vr16
+	addi	r4,r4,32
+err3;	stvx	vr8,r0,r3
+err3;	stvx	vr9,r3,r9
+	addi	r3,r3,32
+
+6:	bf	cr7*4+1,7f
+err3;	lvx	vr3,r0,r4
+	vperm	vr8,vr0,vr3,vr16
+err3;	lvx	vr2,r4,r9
+	vperm	vr9,vr3,vr2,vr16
+err3;	lvx	vr1,r4,r10
+	vperm	vr10,vr2,vr1,vr16
+err3;	lvx	vr0,r4,r11
+	vperm	vr11,vr1,vr0,vr16
+	addi	r4,r4,64
+err3;	stvx	vr8,r0,r3
+err3;	stvx	vr9,r3,r9
+err3;	stvx	vr10,r3,r10
+err3;	stvx	vr11,r3,r11
+	addi	r3,r3,64
+
+7:	sub	r5,r5,r6
+	srdi	r6,r5,7
+
+	std	r14,STK_REG(r14)(r1)
+	std	r15,STK_REG(r15)(r1)
+	std	r16,STK_REG(r16)(r1)
+
+	li	r12,64
+	li	r14,80
+	li	r15,96
+	li	r16,112
+
+	mtctr	r6
+
+	/*
+	 * Now do cacheline sized loads and stores. By this stage the
+	 * cacheline stores are also cacheline aligned.
+	 */
+	.align	5
+8:
+err4;	lvx	vr7,r0,r4
+	vperm	vr8,vr0,vr7,vr16
+err4;	lvx	vr6,r4,r9
+	vperm	vr9,vr7,vr6,vr16
+err4;	lvx	vr5,r4,r10
+	vperm	vr10,vr6,vr5,vr16
+err4;	lvx	vr4,r4,r11
+	vperm	vr11,vr5,vr4,vr16
+err4;	lvx	vr3,r4,r12
+	vperm	vr12,vr4,vr3,vr16
+err4;	lvx	vr2,r4,r14
+	vperm	vr13,vr3,vr2,vr16
+err4;	lvx	vr1,r4,r15
+	vperm	vr14,vr2,vr1,vr16
+err4;	lvx	vr0,r4,r16
+	vperm	vr15,vr1,vr0,vr16
+	addi	r4,r4,128
+err4;	stvx	vr8,r0,r3
+err4;	stvx	vr9,r3,r9
+err4;	stvx	vr10,r3,r10
+err4;	stvx	vr11,r3,r11
+err4;	stvx	vr12,r3,r12
+err4;	stvx	vr13,r3,r14
+err4;	stvx	vr14,r3,r15
+err4;	stvx	vr15,r3,r16
+	addi	r3,r3,128
+	bdnz	8b
+
+	ld	r14,STK_REG(r14)(r1)
+	ld	r15,STK_REG(r15)(r1)
+	ld	r16,STK_REG(r16)(r1)
+
+	/* Up to 127B to go */
+	clrldi	r5,r5,(64-7)
+	srdi	r6,r5,4
+	mtocrf	0x01,r6
+
+	bf	cr7*4+1,9f
+err3;	lvx	vr3,r0,r4
+	vperm	vr8,vr0,vr3,vr16
+err3;	lvx	vr2,r4,r9
+	vperm	vr9,vr3,vr2,vr16
+err3;	lvx	vr1,r4,r10
+	vperm	vr10,vr2,vr1,vr16
+err3;	lvx	vr0,r4,r11
+	vperm	vr11,vr1,vr0,vr16
+	addi	r4,r4,64
+err3;	stvx	vr8,r0,r3
+err3;	stvx	vr9,r3,r9
+err3;	stvx	vr10,r3,r10
+err3;	stvx	vr11,r3,r11
+	addi	r3,r3,64
+
+9:	bf	cr7*4+2,10f
+err3;	lvx	vr1,r0,r4
+	vperm	vr8,vr0,vr1,vr16
+err3;	lvx	vr0,r4,r9
+	vperm	vr9,vr1,vr0,vr16
+	addi	r4,r4,32
+err3;	stvx	vr8,r0,r3
+err3;	stvx	vr9,r3,r9
+	addi	r3,r3,32
+
+10:	bf	cr7*4+3,11f
+err3;	lvx	vr1,r0,r4
+	vperm	vr8,vr0,vr1,vr16
+	addi	r4,r4,16
+err3;	stvx	vr8,r0,r3
+	addi	r3,r3,16
+
+	/* Up to 15B to go */
+11:	clrldi	r5,r5,(64-4)
+	addi	r4,r4,-16	/* Unwind the +16 load offset */
+	mtocrf	0x01,r5
+	bf	cr7*4+0,12f
+err3;	lwz	r0,0(r4)	/* Less chance of a reject with word ops */
+err3;	lwz	r6,4(r4)
+	addi	r4,r4,8
+err3;	stw	r0,0(r3)
+err3;	stw	r6,4(r3)
+	addi	r3,r3,8
+
+12:	bf	cr7*4+1,13f
+err3;	lwz	r0,0(r4)
+	addi	r4,r4,4
+err3;	stw	r0,0(r3)
+	addi	r3,r3,4
+
+13:	bf	cr7*4+2,14f
+err3;	lhz	r0,0(r4)
+	addi	r4,r4,2
+err3;	sth	r0,0(r3)
+	addi	r3,r3,2
+
+14:	bf	cr7*4+3,15f
+err3;	lbz	r0,0(r4)
+err3;	stb	r0,0(r3)
+
+15:	addi	r1,r1,STACKFRAMESIZE
+	b	.exit_vmx_copy		/* tail call optimise */
+#endif /* CONFiG_ALTIVEC */
diff --git a/arch/powerpc/lib/copyuser_power7_vmx.c b/arch/powerpc/lib/copyuser_power7_vmx.c
new file mode 100644
index 0000000..6e1efad
--- /dev/null
+++ b/arch/powerpc/lib/copyuser_power7_vmx.c
@@ -0,0 +1,50 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2011
+ *
+ * Authors: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
+ *          Anton Blanchard <anton@au.ibm.com>
+ */
+#include <linux/uaccess.h>
+#include <linux/hardirq.h>
+
+int enter_vmx_copy(void)
+{
+	if (in_interrupt())
+		return 0;
+
+	/* This acts as preempt_disable() as well and will make
+	 * enable_kernel_altivec(). We need to disable page faults
+	 * as they can call schedule and thus make us lose the VMX
+	 * context. So on page faults, we just fail which will cause
+	 * a fallback to the normal non-vmx copy.
+	 */
+	pagefault_disable();
+
+	enable_kernel_altivec();
+
+	return 1;
+}
+
+/*
+ * This function must return 0 because we tail call optimise when calling
+ * from __copy_tofrom_user_power7 which returns 0 on success.
+ */
+int exit_vmx_copy(void)
+{
+	pagefault_enable();
+	return 0;
+}
diff --git a/arch/powerpc/mm/44x_mmu.c b/arch/powerpc/mm/44x_mmu.c
index f60e006..388b95e 100644
--- a/arch/powerpc/mm/44x_mmu.c
+++ b/arch/powerpc/mm/44x_mmu.c
@@ -78,11 +78,7 @@ static void __init ppc44x_pin_tlb(unsigned int virt, unsigned int phys)
 		"tlbwe	%1,%3,%5\n"
 		"tlbwe	%0,%3,%6\n"
 	:
-#ifdef CONFIG_PPC47x
-	: "r" (PPC47x_TLB2_S_RWX),
-#else
 	: "r" (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G),
-#endif
 	  "r" (phys),
 	  "r" (virt | PPC44x_TLB_VALID | PPC44x_TLB_256M),
 	  "r" (entry),
@@ -221,7 +217,7 @@ void setup_initial_memory_limit(phys_addr_t first_memblock_base,
 {
 	u64 size;
 
-#ifndef CONFIG_RELOCATABLE
+#ifndef CONFIG_NONSTATIC_KERNEL
 	/* We don't currently support the first MEMBLOCK not mapping 0
 	 * physical on those processors
 	 */
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index 991ee81..3787b61 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -21,6 +21,8 @@ obj-$(CONFIG_PPC_STD_MMU_32)	+= ppc_mmu_32.o
 obj-$(CONFIG_PPC_STD_MMU)	+= hash_low_$(CONFIG_WORD_SIZE).o \
 				   tlb_hash$(CONFIG_WORD_SIZE).o \
 				   mmu_context_hash$(CONFIG_WORD_SIZE).o
+obj-$(CONFIG_PPC_ICSWX)		+= icswx.o
+obj-$(CONFIG_PPC_ICSWX_PID)	+= icswx_pid.o
 obj-$(CONFIG_40x)		+= 40x_mmu.o
 obj-$(CONFIG_44x)		+= 44x_mmu.o
 obj-$(CONFIG_PPC_FSL_BOOK3E)	+= fsl_booke_mmu.o
diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index 5efe8c9..2f0d1b0 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -44,6 +44,8 @@
 #include <asm/siginfo.h>
 #include <mm/mmu_decl.h>
 
+#include "icswx.h"
+
 #ifdef CONFIG_KPROBES
 static inline int notify_page_fault(struct pt_regs *regs)
 {
@@ -143,6 +145,21 @@ int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address,
 	is_write = error_code & ESR_DST;
 #endif /* CONFIG_4xx || CONFIG_BOOKE */
 
+#ifdef CONFIG_PPC_ICSWX
+	/*
+	 * we need to do this early because this "data storage
+	 * interrupt" does not update the DAR/DEAR so we don't want to
+	 * look at it
+	 */
+	if (error_code & ICSWX_DSI_UCT) {
+		int ret;
+
+		ret = acop_handle_fault(regs, address, error_code);
+		if (ret)
+			return ret;
+	}
+#endif
+
 	if (notify_page_fault(regs))
 		return 0;
 
diff --git a/arch/powerpc/mm/hugetlbpage-book3e.c b/arch/powerpc/mm/hugetlbpage-book3e.c
index 343ad0b..3bc7006 100644
--- a/arch/powerpc/mm/hugetlbpage-book3e.c
+++ b/arch/powerpc/mm/hugetlbpage-book3e.c
@@ -37,31 +37,32 @@ static inline int book3e_tlb_exists(unsigned long ea, unsigned long pid)
 	return found;
 }
 
-void book3e_hugetlb_preload(struct mm_struct *mm, unsigned long ea, pte_t pte)
+void book3e_hugetlb_preload(struct vm_area_struct *vma, unsigned long ea,
+			    pte_t pte)
 {
 	unsigned long mas1, mas2;
 	u64 mas7_3;
 	unsigned long psize, tsize, shift;
 	unsigned long flags;
+	struct mm_struct *mm;
 
 #ifdef CONFIG_PPC_FSL_BOOK3E
-	int index, lz, ncams;
-	struct vm_area_struct *vma;
+	int index, ncams;
 #endif
 
 	if (unlikely(is_kernel_addr(ea)))
 		return;
 
+	mm = vma->vm_mm;
+
 #ifdef CONFIG_PPC_MM_SLICES
-	psize = mmu_get_tsize(get_slice_psize(mm, ea));
-	tsize = mmu_get_psize(psize);
+	psize = get_slice_psize(mm, ea);
+	tsize = mmu_get_tsize(psize);
 	shift = mmu_psize_defs[psize].shift;
 #else
-	vma = find_vma(mm, ea);
-	psize = vma_mmu_pagesize(vma);	/* returns actual size in bytes */
-	asm (PPC_CNTLZL "%0,%1" : "=r" (lz) : "r" (psize));
-	shift = 31 - lz;
-	tsize = 21 - lz;
+	psize = vma_mmu_pagesize(vma);
+	shift = __ilog2(psize);
+	tsize = shift - 10;
 #endif
 
 	/*
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 8558b57..a8b3cc7 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -29,22 +29,22 @@ unsigned int HPAGE_SHIFT;
 
 /*
  * Tracks gpages after the device tree is scanned and before the
- * huge_boot_pages list is ready.  On 64-bit implementations, this is
- * just used to track 16G pages and so is a single array.  32-bit
- * implementations may have more than one gpage size due to limitations
- * of the memory allocators, so we need multiple arrays
+ * huge_boot_pages list is ready.  On non-Freescale implementations, this is
+ * just used to track 16G pages and so is a single array.  FSL-based
+ * implementations may have more than one gpage size, so we need multiple
+ * arrays
  */
-#ifdef CONFIG_PPC64
-#define MAX_NUMBER_GPAGES	1024
-static u64 gpage_freearray[MAX_NUMBER_GPAGES];
-static unsigned nr_gpages;
-#else
+#ifdef CONFIG_PPC_FSL_BOOK3E
 #define MAX_NUMBER_GPAGES	128
 struct psize_gpages {
 	u64 gpage_list[MAX_NUMBER_GPAGES];
 	unsigned int nr_gpages;
 };
 static struct psize_gpages gpage_freearray[MMU_PAGE_COUNT];
+#else
+#define MAX_NUMBER_GPAGES	1024
+static u64 gpage_freearray[MAX_NUMBER_GPAGES];
+static unsigned nr_gpages;
 #endif
 
 static inline int shift_to_mmu_psize(unsigned int shift)
@@ -115,12 +115,12 @@ static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp,
 	struct kmem_cache *cachep;
 	pte_t *new;
 
-#ifdef CONFIG_PPC64
-	cachep = PGT_CACHE(pdshift - pshift);
-#else
+#ifdef CONFIG_PPC_FSL_BOOK3E
 	int i;
 	int num_hugepd = 1 << (pshift - pdshift);
 	cachep = hugepte_cache;
+#else
+	cachep = PGT_CACHE(pdshift - pshift);
 #endif
 
 	new = kmem_cache_zalloc(cachep, GFP_KERNEL|__GFP_REPEAT);
@@ -132,12 +132,7 @@ static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp,
 		return -ENOMEM;
 
 	spin_lock(&mm->page_table_lock);
-#ifdef CONFIG_PPC64
-	if (!hugepd_none(*hpdp))
-		kmem_cache_free(cachep, new);
-	else
-		hpdp->pd = ((unsigned long)new & ~PD_HUGE) | pshift;
-#else
+#ifdef CONFIG_PPC_FSL_BOOK3E
 	/*
 	 * We have multiple higher-level entries that point to the same
 	 * actual pte location.  Fill in each as we go and backtrack on error.
@@ -156,11 +151,28 @@ static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp,
 			hpdp->pd = 0;
 		kmem_cache_free(cachep, new);
 	}
+#else
+	if (!hugepd_none(*hpdp))
+		kmem_cache_free(cachep, new);
+	else
+		hpdp->pd = ((unsigned long)new & ~PD_HUGE) | pshift;
 #endif
 	spin_unlock(&mm->page_table_lock);
 	return 0;
 }
 
+/*
+ * These macros define how to determine which level of the page table holds
+ * the hpdp.
+ */
+#ifdef CONFIG_PPC_FSL_BOOK3E
+#define HUGEPD_PGD_SHIFT PGDIR_SHIFT
+#define HUGEPD_PUD_SHIFT PUD_SHIFT
+#else
+#define HUGEPD_PGD_SHIFT PUD_SHIFT
+#define HUGEPD_PUD_SHIFT PMD_SHIFT
+#endif
+
 pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr, unsigned long sz)
 {
 	pgd_t *pg;
@@ -173,12 +185,13 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr, unsigned long sz
 	addr &= ~(sz-1);
 
 	pg = pgd_offset(mm, addr);
-	if (pshift >= PUD_SHIFT) {
+
+	if (pshift >= HUGEPD_PGD_SHIFT) {
 		hpdp = (hugepd_t *)pg;
 	} else {
 		pdshift = PUD_SHIFT;
 		pu = pud_alloc(mm, pg, addr);
-		if (pshift >= PMD_SHIFT) {
+		if (pshift >= HUGEPD_PUD_SHIFT) {
 			hpdp = (hugepd_t *)pu;
 		} else {
 			pdshift = PMD_SHIFT;
@@ -198,7 +211,7 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr, unsigned long sz
 	return hugepte_offset(hpdp, addr, pdshift);
 }
 
-#ifdef CONFIG_PPC32
+#ifdef CONFIG_PPC_FSL_BOOK3E
 /* Build list of addresses of gigantic pages.  This function is used in early
  * boot before the buddy or bootmem allocator is setup.
  */
@@ -318,7 +331,7 @@ void __init reserve_hugetlb_gpages(void)
 	}
 }
 
-#else /* PPC64 */
+#else /* !PPC_FSL_BOOK3E */
 
 /* Build list of addresses of gigantic pages.  This function is used in early
  * boot before the buddy or bootmem allocator is setup.
@@ -356,7 +369,7 @@ int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep)
 	return 0;
 }
 
-#ifdef CONFIG_PPC32
+#ifdef CONFIG_PPC_FSL_BOOK3E
 #define HUGEPD_FREELIST_SIZE \
 	((PAGE_SIZE - sizeof(struct hugepd_freelist)) / sizeof(pte_t))
 
@@ -416,11 +429,11 @@ static void free_hugepd_range(struct mmu_gather *tlb, hugepd_t *hpdp, int pdshif
 	unsigned long pdmask = ~((1UL << pdshift) - 1);
 	unsigned int num_hugepd = 1;
 
-#ifdef CONFIG_PPC64
-	unsigned int shift = hugepd_shift(*hpdp);
-#else
-	/* Note: On 32-bit the hpdp may be the first of several */
+#ifdef CONFIG_PPC_FSL_BOOK3E
+	/* Note: On fsl the hpdp may be the first of several */
 	num_hugepd = (1 << (hugepd_shift(*hpdp) - pdshift));
+#else
+	unsigned int shift = hugepd_shift(*hpdp);
 #endif
 
 	start &= pdmask;
@@ -438,10 +451,11 @@ static void free_hugepd_range(struct mmu_gather *tlb, hugepd_t *hpdp, int pdshif
 		hpdp->pd = 0;
 
 	tlb->need_flush = 1;
-#ifdef CONFIG_PPC64
-	pgtable_free_tlb(tlb, hugepte, pdshift - shift);
-#else
+
+#ifdef CONFIG_PPC_FSL_BOOK3E
 	hugepd_free(tlb, hugepte);
+#else
+	pgtable_free_tlb(tlb, hugepte, pdshift - shift);
 #endif
 }
 
@@ -454,14 +468,23 @@ static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud,
 	unsigned long start;
 
 	start = addr;
-	pmd = pmd_offset(pud, addr);
 	do {
+		pmd = pmd_offset(pud, addr);
 		next = pmd_addr_end(addr, end);
 		if (pmd_none(*pmd))
 			continue;
+#ifdef CONFIG_PPC_FSL_BOOK3E
+		/*
+		 * Increment next by the size of the huge mapping since
+		 * there may be more than one entry at this level for a
+		 * single hugepage, but all of them point to
+		 * the same kmem cache that holds the hugepte.
+		 */
+		next = addr + (1 << hugepd_shift(*(hugepd_t *)pmd));
+#endif
 		free_hugepd_range(tlb, (hugepd_t *)pmd, PMD_SHIFT,
 				  addr, next, floor, ceiling);
-	} while (pmd++, addr = next, addr != end);
+	} while (addr = next, addr != end);
 
 	start &= PUD_MASK;
 	if (start < floor)
@@ -488,8 +511,8 @@ static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
 	unsigned long start;
 
 	start = addr;
-	pud = pud_offset(pgd, addr);
 	do {
+		pud = pud_offset(pgd, addr);
 		next = pud_addr_end(addr, end);
 		if (!is_hugepd(pud)) {
 			if (pud_none_or_clear_bad(pud))
@@ -497,10 +520,19 @@ static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
 			hugetlb_free_pmd_range(tlb, pud, addr, next, floor,
 					       ceiling);
 		} else {
+#ifdef CONFIG_PPC_FSL_BOOK3E
+			/*
+			 * Increment next by the size of the huge mapping since
+			 * there may be more than one entry at this level for a
+			 * single hugepage, but all of them point to
+			 * the same kmem cache that holds the hugepte.
+			 */
+			next = addr + (1 << hugepd_shift(*(hugepd_t *)pud));
+#endif
 			free_hugepd_range(tlb, (hugepd_t *)pud, PUD_SHIFT,
 					  addr, next, floor, ceiling);
 		}
-	} while (pud++, addr = next, addr != end);
+	} while (addr = next, addr != end);
 
 	start &= PGDIR_MASK;
 	if (start < floor)
@@ -555,12 +587,12 @@ void hugetlb_free_pgd_range(struct mmu_gather *tlb,
 				continue;
 			hugetlb_free_pud_range(tlb, pgd, addr, next, floor, ceiling);
 		} else {
-#ifdef CONFIG_PPC32
+#ifdef CONFIG_PPC_FSL_BOOK3E
 			/*
 			 * Increment next by the size of the huge mapping since
-			 * on 32-bit there may be more than one entry at the pgd
-			 * level for a single hugepage, but all of them point to
-			 * the same kmem cache that holds the hugepte.
+			 * there may be more than one entry at the pgd level
+			 * for a single hugepage, but all of them point to the
+			 * same kmem cache that holds the hugepte.
 			 */
 			next = addr + (1 << hugepd_shift(*(hugepd_t *)pgd));
 #endif
@@ -698,19 +730,17 @@ int gup_hugepd(hugepd_t *hugepd, unsigned pdshift,
 	return 1;
 }
 
+#ifdef CONFIG_PPC_MM_SLICES
 unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 					unsigned long len, unsigned long pgoff,
 					unsigned long flags)
 {
-#ifdef CONFIG_PPC_MM_SLICES
 	struct hstate *hstate = hstate_file(file);
 	int mmu_psize = shift_to_mmu_psize(huge_page_shift(hstate));
 
 	return slice_get_unmapped_area(addr, len, flags, mmu_psize, 1, 0);
-#else
-	return get_unmapped_area(file, addr, len, pgoff, flags);
-#endif
 }
+#endif
 
 unsigned long vma_mmu_pagesize(struct vm_area_struct *vma)
 {
@@ -784,7 +814,7 @@ static int __init hugepage_setup_sz(char *str)
 }
 __setup("hugepagesz=", hugepage_setup_sz);
 
-#ifdef CONFIG_FSL_BOOKE
+#ifdef CONFIG_PPC_FSL_BOOK3E
 struct kmem_cache *hugepte_cache;
 static int __init hugetlbpage_init(void)
 {
diff --git a/arch/powerpc/mm/icswx.c b/arch/powerpc/mm/icswx.c
new file mode 100644
index 0000000..5d9a59e
--- /dev/null
+++ b/arch/powerpc/mm/icswx.c
@@ -0,0 +1,273 @@
+/*
+ *  ICSWX and ACOP Management
+ *
+ *  Copyright (C) 2011 Anton Blanchard, IBM Corp. <anton@samba.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <linux/uaccess.h>
+
+#include "icswx.h"
+
+/*
+ * The processor and its L2 cache cause the icswx instruction to
+ * generate a COP_REQ transaction on PowerBus. The transaction has no
+ * address, and the processor does not perform an MMU access to
+ * authenticate the transaction. The command portion of the PowerBus
+ * COP_REQ transaction includes the LPAR_ID (LPID) and the coprocessor
+ * Process ID (PID), which the coprocessor compares to the authorized
+ * LPID and PID held in the coprocessor, to determine if the process
+ * is authorized to generate the transaction.  The data of the COP_REQ
+ * transaction is 128-byte or less in size and is placed in cacheable
+ * memory on a 128-byte cache line boundary.
+ *
+ * The task to use a coprocessor should use use_cop() to mark the use
+ * of the Coprocessor Type (CT) and context switching. On a server
+ * class processor, the PID register is used only for coprocessor
+ * management + * and so a coprocessor PID is allocated before
+ * executing icswx + * instruction. Drop_cop() is used to free the
+ * coprocessor PID.
+ *
+ * Example:
+ * Host Fabric Interface (HFI) is a PowerPC network coprocessor.
+ * Each HFI have multiple windows. Each HFI window serves as a
+ * network device sending to and receiving from HFI network.
+ * HFI immediate send function uses icswx instruction. The immediate
+ * send function allows small (single cache-line) packets be sent
+ * without using the regular HFI send FIFO and doorbell, which are
+ * much slower than immediate send.
+ *
+ * For each task intending to use HFI immediate send, the HFI driver
+ * calls use_cop() to obtain a coprocessor PID for the task.
+ * The HFI driver then allocate a free HFI window and save the
+ * coprocessor PID to the HFI window to allow the task to use the
+ * HFI window.
+ *
+ * The HFI driver repeatedly creates immediate send packets and
+ * issues icswx instruction to send data through the HFI window.
+ * The HFI compares the coprocessor PID in the CPU PID register
+ * to the PID held in the HFI window to determine if the transaction
+ * is allowed.
+ *
+ * When the task to release the HFI window, the HFI driver calls
+ * drop_cop() to release the coprocessor PID.
+ */
+
+void switch_cop(struct mm_struct *next)
+{
+#ifdef CONFIG_ICSWX_PID
+	mtspr(SPRN_PID, next->context.cop_pid);
+#endif
+	mtspr(SPRN_ACOP, next->context.acop);
+}
+
+/**
+ * Start using a coprocessor.
+ * @acop: mask of coprocessor to be used.
+ * @mm: The mm the coprocessor to associate with. Most likely current mm.
+ *
+ * Return a positive PID if successful. Negative errno otherwise.
+ * The returned PID will be fed to the coprocessor to determine if an
+ * icswx transaction is authenticated.
+ */
+int use_cop(unsigned long acop, struct mm_struct *mm)
+{
+	int ret;
+
+	if (!cpu_has_feature(CPU_FTR_ICSWX))
+		return -ENODEV;
+
+	if (!mm || !acop)
+		return -EINVAL;
+
+	/* The page_table_lock ensures mm_users won't change under us */
+	spin_lock(&mm->page_table_lock);
+	spin_lock(mm->context.cop_lockp);
+
+	ret = get_cop_pid(mm);
+	if (ret < 0)
+		goto out;
+
+	/* update acop */
+	mm->context.acop |= acop;
+
+	sync_cop(mm);
+
+	/*
+	 * If this is a threaded process then there might be other threads
+	 * running. We need to send an IPI to force them to pick up any
+	 * change in PID and ACOP.
+	 */
+	if (atomic_read(&mm->mm_users) > 1)
+		smp_call_function(sync_cop, mm, 1);
+
+out:
+	spin_unlock(mm->context.cop_lockp);
+	spin_unlock(&mm->page_table_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(use_cop);
+
+/**
+ * Stop using a coprocessor.
+ * @acop: mask of coprocessor to be stopped.
+ * @mm: The mm the coprocessor associated with.
+ */
+void drop_cop(unsigned long acop, struct mm_struct *mm)
+{
+	int free_pid;
+
+	if (!cpu_has_feature(CPU_FTR_ICSWX))
+		return;
+
+	if (WARN_ON_ONCE(!mm))
+		return;
+
+	/* The page_table_lock ensures mm_users won't change under us */
+	spin_lock(&mm->page_table_lock);
+	spin_lock(mm->context.cop_lockp);
+
+	mm->context.acop &= ~acop;
+
+	free_pid = disable_cop_pid(mm);
+	sync_cop(mm);
+
+	/*
+	 * If this is a threaded process then there might be other threads
+	 * running. We need to send an IPI to force them to pick up any
+	 * change in PID and ACOP.
+	 */
+	if (atomic_read(&mm->mm_users) > 1)
+		smp_call_function(sync_cop, mm, 1);
+
+	if (free_pid != COP_PID_NONE)
+		free_cop_pid(free_pid);
+
+	spin_unlock(mm->context.cop_lockp);
+	spin_unlock(&mm->page_table_lock);
+}
+EXPORT_SYMBOL_GPL(drop_cop);
+
+static int acop_use_cop(int ct)
+{
+	/* todo */
+	return -1;
+}
+
+/*
+ * Get the instruction word at the NIP
+ */
+static u32 acop_get_inst(struct pt_regs *regs)
+{
+	u32 inst;
+	u32 __user *p;
+
+	p = (u32 __user *)regs->nip;
+	if (!access_ok(VERIFY_READ, p, sizeof(*p)))
+		return 0;
+
+	if (__get_user(inst, p))
+		return 0;
+
+	return inst;
+}
+
+/**
+ * @regs: regsiters at time of interrupt
+ * @address: storage address
+ * @error_code: Fault code, usually the DSISR or ESR depending on
+ *		processor type
+ *
+ * Return 0 if we are able to resolve the data storage fault that
+ * results from a CT miss in the ACOP register.
+ */
+int acop_handle_fault(struct pt_regs *regs, unsigned long address,
+		      unsigned long error_code)
+{
+	int ct;
+	u32 inst = 0;
+
+	if (!cpu_has_feature(CPU_FTR_ICSWX)) {
+		pr_info("No coprocessors available");
+		_exception(SIGILL, regs, ILL_ILLOPN, address);
+	}
+
+	if (!user_mode(regs)) {
+		/* this could happen if the HV denies the
+		 * kernel access, for now we just die */
+		die("ICSWX from kernel failed", regs, SIGSEGV);
+	}
+
+	/* Some implementations leave us a hint for the CT */
+	ct = ICSWX_GET_CT_HINT(error_code);
+	if (ct < 0) {
+		/* we have to peek at the instruction word to figure out CT */
+		u32 ccw;
+		u32 rs;
+
+		inst = acop_get_inst(regs);
+		if (inst == 0)
+			return -1;
+
+		rs = (inst >> (31 - 10)) & 0x1f;
+		ccw = regs->gpr[rs];
+		ct = (ccw >> 16) & 0x3f;
+	}
+
+	if (!acop_use_cop(ct))
+		return 0;
+
+	/* at this point the CT is unknown to the system */
+	pr_warn("%s[%d]: Coprocessor %d is unavailable",
+		current->comm, current->pid, ct);
+
+	/* get inst if we don't already have it */
+	if (inst == 0) {
+		inst = acop_get_inst(regs);
+		if (inst == 0)
+			return -1;
+	}
+
+	/* Check if the instruction is the "record form" */
+	if (inst & 1) {
+		/*
+		 * the instruction is "record" form so we can reject
+		 * using CR0
+		 */
+		regs->ccr &= ~(0xful << 28);
+		regs->ccr |= ICSWX_RC_NOT_FOUND << 28;
+
+		/* Move on to the next instruction */
+		regs->nip += 4;
+	} else {
+		/*
+		 * There is no architected mechanism to report a bad
+		 * CT so we could either SIGILL or report nothing.
+		 * Since the non-record version should only bu used
+		 * for "hints" or "don't care" we should probably do
+		 * nothing.  However, I could see how some people
+		 * might want an SIGILL so it here if you want it.
+		 */
+#ifdef CONFIG_PPC_ICSWX_USE_SIGILL
+		_exception(SIGILL, regs, ILL_ILLOPN, address);
+#else
+		regs->nip += 4;
+#endif
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(acop_handle_fault);
diff --git a/arch/powerpc/mm/icswx.h b/arch/powerpc/mm/icswx.h
new file mode 100644
index 0000000..42176bd
--- /dev/null
+++ b/arch/powerpc/mm/icswx.h
@@ -0,0 +1,62 @@
+#ifndef _ARCH_POWERPC_MM_ICSWX_H_
+#define _ARCH_POWERPC_MM_ICSWX_H_
+
+/*
+ *  ICSWX and ACOP Management
+ *
+ *  Copyright (C) 2011 Anton Blanchard, IBM Corp. <anton@samba.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <asm/mmu_context.h>
+
+/* also used to denote that PIDs are not used */
+#define COP_PID_NONE 0
+
+static inline void sync_cop(void *arg)
+{
+	struct mm_struct *mm = arg;
+
+	if (mm == current->active_mm)
+		switch_cop(current->active_mm);
+}
+
+#ifdef CONFIG_PPC_ICSWX_PID
+extern int get_cop_pid(struct mm_struct *mm);
+extern int disable_cop_pid(struct mm_struct *mm);
+extern void free_cop_pid(int free_pid);
+#else
+#define get_cop_pid(m) (COP_PID_NONE)
+#define disable_cop_pid(m) (COP_PID_NONE)
+#define free_cop_pid(p)
+#endif
+
+/*
+ * These are implementation bits for architected registers.  If this
+ * ever becomes architecture the should be moved to reg.h et. al.
+ */
+/* UCT is the same bit for Server and Embedded */
+#define ICSWX_DSI_UCT		0x00004000  /* Unavailable Coprocessor Type */
+
+#ifdef CONFIG_PPC_BOOK3E
+/* Embedded implementation gives us no hints as to what the CT is */
+#define ICSWX_GET_CT_HINT(x) (-1)
+#else
+/* Server implementation contains the CT value in the DSISR */
+#define ICSWX_DSISR_CTMASK	0x00003f00
+#define ICSWX_GET_CT_HINT(x)	(((x) & ICSWX_DSISR_CTMASK) >> 8)
+#endif
+
+#define ICSWX_RC_STARTED	0x8	/* The request has been started */
+#define ICSWX_RC_NOT_IDLE	0x4	/* No coprocessor found idle */
+#define ICSWX_RC_NOT_FOUND	0x2	/* No coprocessor found */
+#define ICSWX_RC_UNDEFINED	0x1	/* Reserved */
+
+extern int acop_handle_fault(struct pt_regs *regs, unsigned long address,
+			     unsigned long error_code);
+#endif /* !_ARCH_POWERPC_MM_ICSWX_H_ */
diff --git a/arch/powerpc/mm/icswx_pid.c b/arch/powerpc/mm/icswx_pid.c
new file mode 100644
index 0000000..91e30eb
--- /dev/null
+++ b/arch/powerpc/mm/icswx_pid.c
@@ -0,0 +1,87 @@
+/*
+ *  ICSWX and ACOP/PID Management
+ *
+ *  Copyright (C) 2011 Anton Blanchard, IBM Corp. <anton@samba.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/spinlock.h>
+#include <linux/idr.h>
+#include <linux/module.h>
+#include "icswx.h"
+
+#define COP_PID_MIN (COP_PID_NONE + 1)
+#define COP_PID_MAX (0xFFFF)
+
+static DEFINE_SPINLOCK(mmu_context_acop_lock);
+static DEFINE_IDA(cop_ida);
+
+static int new_cop_pid(struct ida *ida, int min_id, int max_id,
+		       spinlock_t *lock)
+{
+	int index;
+	int err;
+
+again:
+	if (!ida_pre_get(ida, GFP_KERNEL))
+		return -ENOMEM;
+
+	spin_lock(lock);
+	err = ida_get_new_above(ida, min_id, &index);
+	spin_unlock(lock);
+
+	if (err == -EAGAIN)
+		goto again;
+	else if (err)
+		return err;
+
+	if (index > max_id) {
+		spin_lock(lock);
+		ida_remove(ida, index);
+		spin_unlock(lock);
+		return -ENOMEM;
+	}
+
+	return index;
+}
+
+int get_cop_pid(struct mm_struct *mm)
+{
+	int pid;
+
+	if (mm->context.cop_pid == COP_PID_NONE) {
+		pid = new_cop_pid(&cop_ida, COP_PID_MIN, COP_PID_MAX,
+				  &mmu_context_acop_lock);
+		if (pid >= 0)
+			mm->context.cop_pid = pid;
+	}
+	return mm->context.cop_pid;
+}
+
+int disable_cop_pid(struct mm_struct *mm)
+{
+	int free_pid = COP_PID_NONE;
+
+	if ((!mm->context.acop) && (mm->context.cop_pid != COP_PID_NONE)) {
+		free_pid = mm->context.cop_pid;
+		mm->context.cop_pid = COP_PID_NONE;
+	}
+	return free_pid;
+}
+
+void free_cop_pid(int free_pid)
+{
+	spin_lock(&mmu_context_acop_lock);
+	ida_remove(&cop_ida, free_pid);
+	spin_unlock(&mmu_context_acop_lock);
+}
diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index 161cefd..6157be2 100644
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -65,6 +65,13 @@ phys_addr_t memstart_addr = (phys_addr_t)~0ull;
 EXPORT_SYMBOL(memstart_addr);
 phys_addr_t kernstart_addr;
 EXPORT_SYMBOL(kernstart_addr);
+
+#ifdef CONFIG_RELOCATABLE_PPC32
+/* Used in __va()/__pa() */
+long long virt_phys_offset;
+EXPORT_SYMBOL(virt_phys_offset);
+#endif
+
 phys_addr_t lowmem_end_addr;
 
 int boot_mapsize;
@@ -134,8 +141,7 @@ void __init MMU_init(void)
 
 	if (memblock.memory.cnt > 1) {
 #ifndef CONFIG_WII
-		memblock.memory.cnt = 1;
-		memblock_analyze();
+		memblock_enforce_memory_limit(memblock.memory.regions[0].size);
 		printk(KERN_WARNING "Only using first contiguous memory region");
 #else
 		wii_memory_fixups();
@@ -158,7 +164,6 @@ void __init MMU_init(void)
 #ifndef CONFIG_HIGHMEM
 		total_memory = total_lowmem;
 		memblock_enforce_memory_limit(total_lowmem);
-		memblock_analyze();
 #endif /* CONFIG_HIGHMEM */
 	}
 
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 2dd6bdd..d974b79 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -51,6 +51,7 @@
 #include <asm/vdso.h>
 #include <asm/fixmap.h>
 #include <asm/swiotlb.h>
+#include <asm/rtas.h>
 
 #include "mmu_decl.h"
 
@@ -199,7 +200,7 @@ void __init do_init_bootmem(void)
 		unsigned long start_pfn, end_pfn;
 		start_pfn = memblock_region_memory_base_pfn(reg);
 		end_pfn = memblock_region_memory_end_pfn(reg);
-		add_active_range(0, start_pfn, end_pfn);
+		memblock_set_node(0, (phys_addr_t)ULLONG_MAX, 0);
 	}
 
 	/* Add all physical memory to the bootmem map, mark each area
@@ -553,7 +554,7 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address,
 #if (defined(CONFIG_PPC_BOOK3E_64) || defined(CONFIG_PPC_FSL_BOOK3E)) \
 	&& defined(CONFIG_HUGETLB_PAGE)
 	if (is_vm_hugetlb_page(vma))
-		book3e_hugetlb_preload(vma->vm_mm, address, *ptep);
+		book3e_hugetlb_preload(vma, address, *ptep);
 #endif
 }
 
@@ -585,3 +586,23 @@ static int add_system_ram_resources(void)
 	return 0;
 }
 subsys_initcall(add_system_ram_resources);
+
+#ifdef CONFIG_STRICT_DEVMEM
+/*
+ * devmem_is_allowed(): check to see if /dev/mem access to a certain address
+ * is valid. The argument is a physical page number.
+ *
+ * Access has to be given to non-kernel-ram areas as well, these contain the
+ * PCI mmio resources as well as potential bios/acpi data regions.
+ */
+int devmem_is_allowed(unsigned long pfn)
+{
+	if (iomem_is_exclusive(pfn << PAGE_SHIFT))
+		return 0;
+	if (!page_is_ram(pfn))
+		return 1;
+	if (page_is_rtas_user_buf(pfn))
+		return 1;
+	return 0;
+}
+#endif /* CONFIG_STRICT_DEVMEM */
diff --git a/arch/powerpc/mm/mmap_64.c b/arch/powerpc/mm/mmap_64.c
index 5a783d8..67a42ed 100644
--- a/arch/powerpc/mm/mmap_64.c
+++ b/arch/powerpc/mm/mmap_64.c
@@ -53,14 +53,6 @@ static inline int mmap_is_legacy(void)
 	return sysctl_legacy_va_layout;
 }
 
-/*
- * Since get_random_int() returns the same value within a 1 jiffy window,
- * we will almost always get the same randomisation for the stack and mmap
- * region. This will mean the relative distance between stack and mmap will
- * be the same.
- *
- * To avoid this we can shift the randomness by 1 bit.
- */
 static unsigned long mmap_rnd(void)
 {
 	unsigned long rnd = 0;
@@ -68,11 +60,11 @@ static unsigned long mmap_rnd(void)
 	if (current->flags & PF_RANDOMIZE) {
 		/* 8MB for 32bit, 1GB for 64bit */
 		if (is_32bit_task())
-			rnd = (long)(get_random_int() % (1<<(22-PAGE_SHIFT)));
+			rnd = (long)(get_random_int() % (1<<(23-PAGE_SHIFT)));
 		else
-			rnd = (long)(get_random_int() % (1<<(29-PAGE_SHIFT)));
+			rnd = (long)(get_random_int() % (1<<(30-PAGE_SHIFT)));
 	}
-	return (rnd << PAGE_SHIFT) * 2;
+	return rnd << PAGE_SHIFT;
 }
 
 static inline unsigned long mmap_base(void)
diff --git a/arch/powerpc/mm/mmu_context_hash64.c b/arch/powerpc/mm/mmu_context_hash64.c
index ca988a3..40677aa 100644
--- a/arch/powerpc/mm/mmu_context_hash64.c
+++ b/arch/powerpc/mm/mmu_context_hash64.c
@@ -24,200 +24,7 @@
 
 #include <asm/mmu_context.h>
 
-#ifdef CONFIG_PPC_ICSWX
-/*
- * The processor and its L2 cache cause the icswx instruction to
- * generate a COP_REQ transaction on PowerBus. The transaction has
- * no address, and the processor does not perform an MMU access
- * to authenticate the transaction. The command portion of the
- * PowerBus COP_REQ transaction includes the LPAR_ID (LPID) and
- * the coprocessor Process ID (PID), which the coprocessor compares
- * to the authorized LPID and PID held in the coprocessor, to determine
- * if the process is authorized to generate the transaction.
- * The data of the COP_REQ transaction is 128-byte or less and is
- * placed in cacheable memory on a 128-byte cache line boundary.
- *
- * The task to use a coprocessor should use use_cop() to allocate
- * a coprocessor PID before executing icswx instruction. use_cop()
- * also enables the coprocessor context switching. Drop_cop() is
- * used to free the coprocessor PID.
- *
- * Example:
- * Host Fabric Interface (HFI) is a PowerPC network coprocessor.
- * Each HFI have multiple windows. Each HFI window serves as a
- * network device sending to and receiving from HFI network.
- * HFI immediate send function uses icswx instruction. The immediate
- * send function allows small (single cache-line) packets be sent
- * without using the regular HFI send FIFO and doorbell, which are
- * much slower than immediate send.
- *
- * For each task intending to use HFI immediate send, the HFI driver
- * calls use_cop() to obtain a coprocessor PID for the task.
- * The HFI driver then allocate a free HFI window and save the
- * coprocessor PID to the HFI window to allow the task to use the
- * HFI window.
- *
- * The HFI driver repeatedly creates immediate send packets and
- * issues icswx instruction to send data through the HFI window.
- * The HFI compares the coprocessor PID in the CPU PID register
- * to the PID held in the HFI window to determine if the transaction
- * is allowed.
- *
- * When the task to release the HFI window, the HFI driver calls
- * drop_cop() to release the coprocessor PID.
- */
-
-#define COP_PID_NONE 0
-#define COP_PID_MIN (COP_PID_NONE + 1)
-#define COP_PID_MAX (0xFFFF)
-
-static DEFINE_SPINLOCK(mmu_context_acop_lock);
-static DEFINE_IDA(cop_ida);
-
-void switch_cop(struct mm_struct *next)
-{
-	mtspr(SPRN_PID, next->context.cop_pid);
-	mtspr(SPRN_ACOP, next->context.acop);
-}
-
-static int new_cop_pid(struct ida *ida, int min_id, int max_id,
-		       spinlock_t *lock)
-{
-	int index;
-	int err;
-
-again:
-	if (!ida_pre_get(ida, GFP_KERNEL))
-		return -ENOMEM;
-
-	spin_lock(lock);
-	err = ida_get_new_above(ida, min_id, &index);
-	spin_unlock(lock);
-
-	if (err == -EAGAIN)
-		goto again;
-	else if (err)
-		return err;
-
-	if (index > max_id) {
-		spin_lock(lock);
-		ida_remove(ida, index);
-		spin_unlock(lock);
-		return -ENOMEM;
-	}
-
-	return index;
-}
-
-static void sync_cop(void *arg)
-{
-	struct mm_struct *mm = arg;
-
-	if (mm == current->active_mm)
-		switch_cop(current->active_mm);
-}
-
-/**
- * Start using a coprocessor.
- * @acop: mask of coprocessor to be used.
- * @mm: The mm the coprocessor to associate with. Most likely current mm.
- *
- * Return a positive PID if successful. Negative errno otherwise.
- * The returned PID will be fed to the coprocessor to determine if an
- * icswx transaction is authenticated.
- */
-int use_cop(unsigned long acop, struct mm_struct *mm)
-{
-	int ret;
-
-	if (!cpu_has_feature(CPU_FTR_ICSWX))
-		return -ENODEV;
-
-	if (!mm || !acop)
-		return -EINVAL;
-
-	/* The page_table_lock ensures mm_users won't change under us */
-	spin_lock(&mm->page_table_lock);
-	spin_lock(mm->context.cop_lockp);
-
-	if (mm->context.cop_pid == COP_PID_NONE) {
-		ret = new_cop_pid(&cop_ida, COP_PID_MIN, COP_PID_MAX,
-				  &mmu_context_acop_lock);
-		if (ret < 0)
-			goto out;
-
-		mm->context.cop_pid = ret;
-	}
-	mm->context.acop |= acop;
-
-	sync_cop(mm);
-
-	/*
-	 * If this is a threaded process then there might be other threads
-	 * running. We need to send an IPI to force them to pick up any
-	 * change in PID and ACOP.
-	 */
-	if (atomic_read(&mm->mm_users) > 1)
-		smp_call_function(sync_cop, mm, 1);
-
-	ret = mm->context.cop_pid;
-
-out:
-	spin_unlock(mm->context.cop_lockp);
-	spin_unlock(&mm->page_table_lock);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(use_cop);
-
-/**
- * Stop using a coprocessor.
- * @acop: mask of coprocessor to be stopped.
- * @mm: The mm the coprocessor associated with.
- */
-void drop_cop(unsigned long acop, struct mm_struct *mm)
-{
-	int free_pid = COP_PID_NONE;
-
-	if (!cpu_has_feature(CPU_FTR_ICSWX))
-		return;
-
-	if (WARN_ON_ONCE(!mm))
-		return;
-
-	/* The page_table_lock ensures mm_users won't change under us */
-	spin_lock(&mm->page_table_lock);
-	spin_lock(mm->context.cop_lockp);
-
-	mm->context.acop &= ~acop;
-
-	if ((!mm->context.acop) && (mm->context.cop_pid != COP_PID_NONE)) {
-		free_pid = mm->context.cop_pid;
-		mm->context.cop_pid = COP_PID_NONE;
-	}
-
-	sync_cop(mm);
-
-	/*
-	 * If this is a threaded process then there might be other threads
-	 * running. We need to send an IPI to force them to pick up any
-	 * change in PID and ACOP.
-	 */
-	if (atomic_read(&mm->mm_users) > 1)
-		smp_call_function(sync_cop, mm, 1);
-
-	if (free_pid != COP_PID_NONE) {
-		spin_lock(&mmu_context_acop_lock);
-		ida_remove(&cop_ida, free_pid);
-		spin_unlock(&mmu_context_acop_lock);
-	}
-
-	spin_unlock(mm->context.cop_lockp);
-	spin_unlock(&mm->page_table_lock);
-}
-EXPORT_SYMBOL_GPL(drop_cop);
-
-#endif /* CONFIG_PPC_ICSWX */
+#include "icswx.h"
 
 static DEFINE_SPINLOCK(mmu_context_lock);
 static DEFINE_IDA(mmu_context_ida);
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index b22a83a..4ff3d8e 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -127,45 +127,25 @@ static int __cpuinit fake_numa_create_new_node(unsigned long end_pfn,
 }
 
 /*
- * get_active_region_work_fn - A helper function for get_node_active_region
- *	Returns datax set to the start_pfn and end_pfn if they contain
- *	the initial value of datax->start_pfn between them
- * @start_pfn: start page(inclusive) of region to check
- * @end_pfn: end page(exclusive) of region to check
- * @datax: comes in with ->start_pfn set to value to search for and
- *	goes out with active range if it contains it
- * Returns 1 if search value is in range else 0
- */
-static int __init get_active_region_work_fn(unsigned long start_pfn,
-					unsigned long end_pfn, void *datax)
-{
-	struct node_active_region *data;
-	data = (struct node_active_region *)datax;
-
-	if (start_pfn <= data->start_pfn && end_pfn > data->start_pfn) {
-		data->start_pfn = start_pfn;
-		data->end_pfn = end_pfn;
-		return 1;
-	}
-	return 0;
-
-}
-
-/*
- * get_node_active_region - Return active region containing start_pfn
+ * get_node_active_region - Return active region containing pfn
  * Active range returned is empty if none found.
- * @start_pfn: The page to return the region for.
- * @node_ar: Returned set to the active region containing start_pfn
+ * @pfn: The page to return the region for
+ * @node_ar: Returned set to the active region containing @pfn
  */
-static void __init get_node_active_region(unsigned long start_pfn,
-		       struct node_active_region *node_ar)
+static void __init get_node_active_region(unsigned long pfn,
+					  struct node_active_region *node_ar)
 {
-	int nid = early_pfn_to_nid(start_pfn);
+	unsigned long start_pfn, end_pfn;
+	int i, nid;
 
-	node_ar->nid = nid;
-	node_ar->start_pfn = start_pfn;
-	node_ar->end_pfn = start_pfn;
-	work_with_active_regions(nid, get_active_region_work_fn, node_ar);
+	for_each_mem_pfn_range(i, MAX_NUMNODES, &start_pfn, &end_pfn, &nid) {
+		if (pfn >= start_pfn && pfn < end_pfn) {
+			node_ar->nid = nid;
+			node_ar->start_pfn = start_pfn;
+			node_ar->end_pfn = end_pfn;
+			break;
+		}
+	}
 }
 
 static void map_cpu_to_node(int cpu, int node)
@@ -406,7 +386,7 @@ static void __init get_n_mem_cells(int *n_addr_cells, int *n_size_cells)
 	of_node_put(memory);
 }
 
-static unsigned long __devinit read_n_cells(int n, const unsigned int **buf)
+static unsigned long read_n_cells(int n, const unsigned int **buf)
 {
 	unsigned long result = 0;
 
@@ -521,7 +501,7 @@ static int of_get_assoc_arrays(struct device_node *memory,
 	aa->n_arrays = *prop++;
 	aa->array_sz = *prop++;
 
-	/* Now that we know the number of arrrays and size of each array,
+	/* Now that we know the number of arrays and size of each array,
 	 * revalidate the size of the property read in.
 	 */
 	if (len < (aa->n_arrays * aa->array_sz + 2) * sizeof(unsigned int))
@@ -710,9 +690,7 @@ static void __init parse_drconf_memory(struct device_node *memory)
 			node_set_online(nid);
 			sz = numa_enforce_memory_limit(base, size);
 			if (sz)
-				add_active_range(nid, base >> PAGE_SHIFT,
-						 (base >> PAGE_SHIFT)
-						 + (sz >> PAGE_SHIFT));
+				memblock_set_node(base, sz, nid);
 		} while (--ranges);
 	}
 }
@@ -802,8 +780,7 @@ new_range:
 				continue;
 		}
 
-		add_active_range(nid, start >> PAGE_SHIFT,
-				(start >> PAGE_SHIFT) + (size >> PAGE_SHIFT));
+		memblock_set_node(start, size, nid);
 
 		if (--ranges)
 			goto new_range;
@@ -839,7 +816,8 @@ static void __init setup_nonnuma(void)
 		end_pfn = memblock_region_memory_end_pfn(reg);
 
 		fake_numa_create_new_node(end_pfn, &nid);
-		add_active_range(nid, start_pfn, end_pfn);
+		memblock_set_node(PFN_PHYS(start_pfn),
+				  PFN_PHYS(end_pfn - start_pfn), nid);
 		node_set_online(nid);
 	}
 }
@@ -969,7 +947,7 @@ static struct notifier_block __cpuinitdata ppc64_numa_nb = {
 	.priority = 1 /* Must run before sched domains notifier. */
 };
 
-static void mark_reserved_regions_for_nid(int nid)
+static void __init mark_reserved_regions_for_nid(int nid)
 {
 	struct pglist_data *node = NODE_DATA(nid);
 	struct memblock_region *reg;
@@ -1462,7 +1440,7 @@ int arch_update_cpu_topology(void)
 {
 	int cpu, nid, old_nid;
 	unsigned int associativity[VPHN_ASSOC_BUFSIZE] = {0};
-	struct sys_device *sysdev;
+	struct device *dev;
 
 	for_each_cpu(cpu,&cpu_associativity_changes_mask) {
 		vphn_get_associativity(cpu, associativity);
@@ -1483,9 +1461,9 @@ int arch_update_cpu_topology(void)
 		register_cpu_under_node(cpu, nid);
 		put_online_cpus();
 
-		sysdev = get_cpu_sysdev(cpu);
-		if (sysdev)
-			kobject_uevent(&sysdev->kobj, KOBJ_CHANGE);
+		dev = get_cpu_device(cpu);
+		if (dev)
+			kobject_uevent(&dev->kobj, KOBJ_CHANGE);
 	}
 
 	return 1;
diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S
index dc4a5f3..ff672bd 100644
--- a/arch/powerpc/mm/tlb_low_64e.S
+++ b/arch/powerpc/mm/tlb_low_64e.S
@@ -94,11 +94,11 @@
 
 	srdi	r15,r16,60		/* get region */
 	rldicl.	r10,r16,64-PGTABLE_EADDR_SIZE,PGTABLE_EADDR_SIZE+4
-	bne-	dtlb_miss_fault_bolted
+	bne-	dtlb_miss_fault_bolted	/* Bail if fault addr is invalid */
 
 	rlwinm	r10,r11,32-19,27,27
 	rlwimi	r10,r11,32-16,19,19
-	cmpwi	r15,0
+	cmpwi	r15,0			/* user vs kernel check */
 	ori	r10,r10,_PAGE_PRESENT
 	oris	r11,r10,_PAGE_ACCESSED@h
 
@@ -120,44 +120,38 @@ tlb_miss_common_bolted:
 	rldicl	r15,r16,64-PGDIR_SHIFT+3,64-PGD_INDEX_SIZE-3
 	cmpldi	cr0,r14,0
 	clrrdi	r15,r15,3
-	beq	tlb_miss_fault_bolted
+	beq	tlb_miss_fault_bolted	/* No PGDIR, bail */
 
 BEGIN_MMU_FTR_SECTION
 	/* Set the TLB reservation and search for existing entry. Then load
 	 * the entry.
 	 */
 	PPC_TLBSRX_DOT(0,r16)
-	ldx	r14,r14,r15
-	beq	normal_tlb_miss_done
+	ldx	r14,r14,r15		/* grab pgd entry */
+	beq	normal_tlb_miss_done	/* tlb exists already, bail */
 MMU_FTR_SECTION_ELSE
-	ldx	r14,r14,r15
+	ldx	r14,r14,r15		/* grab pgd entry */
 ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_USE_TLBRSRV)
 
 #ifndef CONFIG_PPC_64K_PAGES
 	rldicl	r15,r16,64-PUD_SHIFT+3,64-PUD_INDEX_SIZE-3
 	clrrdi	r15,r15,3
-
-	cmpldi	cr0,r14,0
-	beq	tlb_miss_fault_bolted
-
-	ldx	r14,r14,r15
+	cmpdi	cr0,r14,0
+	bge	tlb_miss_fault_bolted	/* Bad pgd entry or hugepage; bail */
+	ldx	r14,r14,r15		/* grab pud entry */
 #endif /* CONFIG_PPC_64K_PAGES */
 
 	rldicl	r15,r16,64-PMD_SHIFT+3,64-PMD_INDEX_SIZE-3
 	clrrdi	r15,r15,3
-
-	cmpldi	cr0,r14,0
-	beq	tlb_miss_fault_bolted
-
-	ldx	r14,r14,r15
+	cmpdi	cr0,r14,0
+	bge	tlb_miss_fault_bolted
+	ldx	r14,r14,r15		/* Grab pmd entry */
 
 	rldicl	r15,r16,64-PAGE_SHIFT+3,64-PTE_INDEX_SIZE-3
 	clrrdi	r15,r15,3
-
-	cmpldi	cr0,r14,0
-	beq	tlb_miss_fault_bolted
-
-	ldx	r14,r14,r15
+	cmpdi	cr0,r14,0
+	bge	tlb_miss_fault_bolted
+	ldx	r14,r14,r15		/* Grab PTE, normal (!huge) page */
 
 	/* Check if required permissions are met */
 	andc.	r15,r11,r14
diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index 4e13d6f..df32a83 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -52,7 +52,7 @@
  * indirect page table entries.
  */
 #ifdef CONFIG_PPC_BOOK3E_MMU
-#ifdef CONFIG_FSL_BOOKE
+#ifdef CONFIG_PPC_FSL_BOOK3E
 struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT] = {
 	[MMU_PAGE_4K] = {
 		.shift	= 12,
@@ -615,7 +615,6 @@ static void __early_init_mmu(int boot_cpu)
 
 		/* limit memory so we dont have linear faults */
 		memblock_enforce_memory_limit(linear_map_top);
-		memblock_analyze();
 
 		patch_exception(0x1c0, exc_data_tlb_miss_bolted_book3e);
 		patch_exception(0x1e0, exc_instruction_tlb_miss_bolted_book3e);
diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig
index 1530229..a392d12 100644
--- a/arch/powerpc/platforms/40x/Kconfig
+++ b/arch/powerpc/platforms/40x/Kconfig
@@ -1,19 +1,3 @@
-#config BUBINGA
-#	bool "Bubinga"
-#	depends on 40x
-#	default n
-#	select 405EP
-#	help
-#	  This option enables support for the IBM 405EP evaluation board.
-
-#config CPCI405
-#	bool "CPCI405"
-#	depends on 40x
-#	default n
-#	select 405GP
-#	help
-#	  This option enables support for the CPCI405 board.
-
 config ACADIA
 	bool "Acadia"
 	depends on 40x
@@ -65,14 +49,6 @@ config MAKALU
 	help
 	  This option enables support for the AMCC PPC405EX board.
 
-#config SYCAMORE
-#	bool "Sycamore"
-#	depends on 40x
-#	default n
-#	select 405GPR
-#	help
-#	  This option enables support for the IBM PPC405GPr evaluation board.
-
 config WALNUT
 	bool "Walnut"
 	depends on 40x
@@ -100,6 +76,16 @@ config XILINX_VIRTEX_GENERIC_BOARD
 	  Most Virtex designs should use this unless it needs to do some
 	  special configuration at board probe time.
 
+config OBS600
+	bool "OpenBlockS 600"
+	depends on 40x
+	default n
+	select 405EX
+	select PPC40x_SIMPLE
+	help
+	  This option enables support for PlatHome OpenBlockS 600 server
+
+
 config PPC40x_SIMPLE
 	bool "Simple PowerPC 40x board support"
 	depends on 40x
@@ -173,16 +159,11 @@ config IBM405_ERR77
 config IBM405_ERR51
 	bool
 
-#config BIOS_FIXUP
-#	bool
-#	depends on BUBINGA || EP405 || SYCAMORE || WALNUT
-#	default y
-
-#config PPC4xx_DMA
-#	bool "PPC4xx DMA controller support"
-#	depends on 4xx
-
-#config PPC4xx_EDMA
-#	bool
-#	depends on !STB03xxx && PPC4xx_DMA
-#	default y
+config APM8018X
+	bool "APM8018X"
+	depends on 40x
+	default n
+	select PPC40x_SIMPLE
+	help
+	  This option enables support for the AppliedMicro APM8018X evaluation
+	  board.
diff --git a/arch/powerpc/platforms/40x/ppc40x_simple.c b/arch/powerpc/platforms/40x/ppc40x_simple.c
index e8dd5c5..9761206 100644
--- a/arch/powerpc/platforms/40x/ppc40x_simple.c
+++ b/arch/powerpc/platforms/40x/ppc40x_simple.c
@@ -55,7 +55,9 @@ static const char *board[] __initdata = {
 	"amcc,haleakala",
 	"amcc,kilauea",
 	"amcc,makalu",
-	"est,hotfoot"
+	"apm,klondike",
+	"est,hotfoot",
+	"plathome,obs600"
 };
 
 static int __init ppc40x_probe(void)
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index 762322c..fcf6bf2 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -75,7 +75,7 @@ config KATMAI
 	select PCI
 	select PPC4xx_PCI_EXPRESS
 	select PCI_MSI
-	select PCC4xx_MSI
+	select PPC4xx_MSI
 	help
 	  This option enables support for the AMCC PPC440SPe evaluation board.
 
@@ -186,6 +186,16 @@ config ISS4xx
 	help
 	  This option enables support for the IBM ISS simulation environment
 
+config CURRITUCK
+	bool "IBM Currituck (476fpe) Support"
+	depends on PPC_47x
+	default n
+	select SWIOTLB
+	select 476FPE
+	select PPC4xx_PCI_EXPRESS
+	help
+	  This option enables support for the IBM Currituck (476fpe) evaluation board
+
 config ICON
 	bool "Icon"
 	depends on 44x
@@ -197,22 +207,6 @@ config ICON
 	help
 	  This option enables support for the AMCC PPC440SPe evaluation board.
 
-#config LUAN
-#	bool "Luan"
-#	depends on 44x
-#	default n
-#	select 440SP
-#	help
-#	  This option enables support for the IBM PPC440SP evaluation board.
-
-#config OCOTEA
-#	bool "Ocotea"
-#	depends on 44x
-#	default n
-#	select 440GX
-#	help
-#	  This option enables support for the IBM PPC440GX evaluation board.
-
 config XILINX_VIRTEX440_GENERIC_BOARD
 	bool "Generic Xilinx Virtex 5 FXT board support"
 	depends on 44x
@@ -308,6 +302,10 @@ config 460SX
 	select IBM_EMAC_ZMII
 	select IBM_EMAC_TAH
 
+config 476FPE
+	bool
+	select PPC_FPU
+
 config APM821xx
 	bool
 	select PPC_FPU
diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile
index 553db60..d03833a 100644
--- a/arch/powerpc/platforms/44x/Makefile
+++ b/arch/powerpc/platforms/44x/Makefile
@@ -10,3 +10,4 @@ obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o
 obj-$(CONFIG_XILINX_ML510) += virtex_ml510.o
 obj-$(CONFIG_ISS4xx)	+= iss4xx.o
 obj-$(CONFIG_CANYONLANDS)+= canyonlands.o
+obj-$(CONFIG_CURRITUCK)	+= currituck.o
diff --git a/arch/powerpc/platforms/44x/currituck.c b/arch/powerpc/platforms/44x/currituck.c
new file mode 100644
index 0000000..3f6229b
--- /dev/null
+++ b/arch/powerpc/platforms/44x/currituck.c
@@ -0,0 +1,204 @@
+/*
+ * Currituck board specific routines
+ *
+ * Copyright © 2011 Tony Breeds IBM Corporation
+ *
+ * Based on earlier code:
+ *    Matt Porter <mporter@kernel.crashing.org>
+ *    Copyright 2002-2005 MontaVista Software Inc.
+ *
+ *    Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *    Copyright (c) 2003-2005 Zultys Technologies
+ *
+ *    Rewritten and ported to the merged powerpc tree:
+ *    Copyright 2007 David Gibson <dwg@au1.ibm.com>, IBM Corporation.
+ *    Copyright © 2011 David Kliekamp IBM Corporation
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/memblock.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/rtc.h>
+
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/time.h>
+#include <asm/uic.h>
+#include <asm/ppc4xx.h>
+#include <asm/mpic.h>
+#include <asm/mmu.h>
+
+#include <linux/pci.h>
+
+static __initdata struct of_device_id ppc47x_of_bus[] = {
+	{ .compatible = "ibm,plb4", },
+	{ .compatible = "ibm,plb6", },
+	{ .compatible = "ibm,opb", },
+	{ .compatible = "ibm,ebc", },
+	{},
+};
+
+/* The EEPROM is missing and the default values are bogus.  This forces USB in
+ * to EHCI mode */
+static void __devinit quirk_ppc_currituck_usb_fixup(struct pci_dev *dev)
+{
+	if (of_machine_is_compatible("ibm,currituck")) {
+		pci_write_config_dword(dev, 0xe0, 0x0114231f);
+		pci_write_config_dword(dev, 0xe4, 0x00006c40);
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(0x1033, 0x0035, quirk_ppc_currituck_usb_fixup);
+
+static int __init ppc47x_device_probe(void)
+{
+	of_platform_bus_probe(NULL, ppc47x_of_bus, NULL);
+
+	return 0;
+}
+machine_device_initcall(ppc47x, ppc47x_device_probe);
+
+/* We can have either UICs or MPICs */
+static void __init ppc47x_init_irq(void)
+{
+	struct device_node *np;
+
+	/* Find top level interrupt controller */
+	for_each_node_with_property(np, "interrupt-controller") {
+		if (of_get_property(np, "interrupts", NULL) == NULL)
+			break;
+	}
+	if (np == NULL)
+		panic("Can't find top level interrupt controller");
+
+	/* Check type and do appropriate initialization */
+	if (of_device_is_compatible(np, "chrp,open-pic")) {
+		/* The MPIC driver will get everything it needs from the
+		 * device-tree, just pass 0 to all arguments
+		 */
+		struct mpic *mpic =
+			mpic_alloc(np, 0, 0, 0, 0, " MPIC     ");
+		BUG_ON(mpic == NULL);
+		mpic_init(mpic);
+		ppc_md.get_irq = mpic_get_irq;
+	} else
+		panic("Unrecognized top level interrupt controller");
+}
+
+#ifdef CONFIG_SMP
+static void __cpuinit smp_ppc47x_setup_cpu(int cpu)
+{
+	mpic_setup_this_cpu();
+}
+
+static int __cpuinit smp_ppc47x_kick_cpu(int cpu)
+{
+	struct device_node *cpunode = of_get_cpu_node(cpu, NULL);
+	const u64 *spin_table_addr_prop;
+	u32 *spin_table;
+	extern void start_secondary_47x(void);
+
+	BUG_ON(cpunode == NULL);
+
+	/* Assume spin table. We could test for the enable-method in
+	 * the device-tree but currently there's little point as it's
+	 * our only supported method
+	 */
+	spin_table_addr_prop =
+		of_get_property(cpunode, "cpu-release-addr", NULL);
+
+	if (spin_table_addr_prop == NULL) {
+		pr_err("CPU%d: Can't start, missing cpu-release-addr !\n",
+		       cpu);
+		return 1;
+	}
+
+	/* Assume it's mapped as part of the linear mapping. This is a bit
+	 * fishy but will work fine for now
+	 *
+	 * XXX: Is there any reason to assume differently?
+	 */
+	spin_table = (u32 *)__va(*spin_table_addr_prop);
+	pr_debug("CPU%d: Spin table mapped at %p\n", cpu, spin_table);
+
+	spin_table[3] = cpu;
+	smp_wmb();
+	spin_table[1] = __pa(start_secondary_47x);
+	mb();
+
+	return 0;
+}
+
+static struct smp_ops_t ppc47x_smp_ops = {
+	.probe		= smp_mpic_probe,
+	.message_pass	= smp_mpic_message_pass,
+	.setup_cpu	= smp_ppc47x_setup_cpu,
+	.kick_cpu	= smp_ppc47x_kick_cpu,
+	.give_timebase	= smp_generic_give_timebase,
+	.take_timebase	= smp_generic_take_timebase,
+};
+
+static void __init ppc47x_smp_init(void)
+{
+	if (mmu_has_feature(MMU_FTR_TYPE_47x))
+		smp_ops = &ppc47x_smp_ops;
+}
+
+#else /* CONFIG_SMP */
+static void __init ppc47x_smp_init(void) { }
+#endif /* CONFIG_SMP */
+
+static void __init ppc47x_setup_arch(void)
+{
+
+	/* No need to check the DMA config as we /know/ our windows are all of
+ 	 * RAM.  Lets hope that doesn't change */
+#ifdef CONFIG_SWIOTLB
+	if (memblock_end_of_DRAM() > 0xffffffff) {
+		ppc_swiotlb_enable = 1;
+		set_pci_dma_ops(&swiotlb_dma_ops);
+		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
+	}
+#endif
+	ppc47x_smp_init();
+}
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init ppc47x_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (!of_flat_dt_is_compatible(root, "ibm,currituck"))
+		return 0;
+
+	return 1;
+}
+
+/* Use USB controller should have been hardware swizzled but it wasn't :( */
+static void ppc47x_pci_irq_fixup(struct pci_dev *dev)
+{
+	if (dev->vendor == 0x1033 && (dev->device == 0x0035 ||
+	                              dev->device == 0x00e0)) {
+		dev->irq = irq_create_mapping(NULL, 47);
+		pr_info("%s: Mapping irq 47 %d\n", __func__, dev->irq);
+	}
+}
+
+define_machine(ppc47x) {
+	.name			= "PowerPC 47x",
+	.probe			= ppc47x_probe,
+	.progress		= udbg_progress,
+	.init_IRQ		= ppc47x_init_irq,
+	.setup_arch		= ppc47x_setup_arch,
+	.pci_irq_fixup		= ppc47x_pci_irq_fixup,
+	.restart		= ppc4xx_reset_system,
+	.calibrate_decr		= generic_calibrate_decr,
+};
diff --git a/arch/powerpc/platforms/44x/iss4xx.c b/arch/powerpc/platforms/44x/iss4xx.c
index 19395f1..5b8cdbb 100644
--- a/arch/powerpc/platforms/44x/iss4xx.c
+++ b/arch/powerpc/platforms/44x/iss4xx.c
@@ -71,7 +71,7 @@ static void __init iss4xx_init_irq(void)
 		/* The MPIC driver will get everything it needs from the
 		 * device-tree, just pass 0 to all arguments
 		 */
-		struct mpic *mpic = mpic_alloc(np, 0, MPIC_PRIMARY, 0, 0,
+		struct mpic *mpic = mpic_alloc(np, 0, 0, 0, 0,
 					       " MPIC     ");
 		BUG_ON(mpic == NULL);
 		mpic_init(mpic);
diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig
index b3ebce1..c169998 100644
--- a/arch/powerpc/platforms/512x/Kconfig
+++ b/arch/powerpc/platforms/512x/Kconfig
@@ -12,7 +12,6 @@ config MPC5121_ADS
 	bool "Freescale MPC5121E ADS"
 	depends on PPC_MPC512x
 	select DEFAULT_UIMAGE
-	select MPC5121_ADS_CPLD
 	help
 	  This option enables support for the MPC5121E ADS board.
 
diff --git a/arch/powerpc/platforms/83xx/asp834x.c b/arch/powerpc/platforms/83xx/asp834x.c
index aa0d84d..464ea8e 100644
--- a/arch/powerpc/platforms/83xx/asp834x.c
+++ b/arch/powerpc/platforms/83xx/asp834x.c
@@ -36,38 +36,7 @@ static void __init asp834x_setup_arch(void)
 	mpc834x_usb_cfg();
 }
 
-static void __init asp834x_init_IRQ(void)
-{
-	struct device_node *np;
-
-	np = of_find_node_by_type(NULL, "ipic");
-	if (!np)
-		return;
-
-	ipic_init(np, 0);
-
-	of_node_put(np);
-
-	/* Initialize the default interrupt mapping priorities,
-	 * in case the boot rom changed something on us.
-	 */
-	ipic_set_default_priority();
-}
-
-static struct __initdata of_device_id asp8347_ids[] = {
-	{ .type = "soc", },
-	{ .compatible = "soc", },
-	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
-	{},
-};
-
-static int __init asp8347_declare_of_platform_devices(void)
-{
-	of_platform_bus_probe(NULL, asp8347_ids, NULL);
-	return 0;
-}
-machine_device_initcall(asp834x, asp8347_declare_of_platform_devices);
+machine_device_initcall(asp834x, mpc83xx_declare_of_platform_devices);
 
 /*
  * Called very early, MMU is off, device-tree isn't unflattened
@@ -82,7 +51,7 @@ define_machine(asp834x) {
 	.name			= "ASP8347E",
 	.probe			= asp834x_probe,
 	.setup_arch		= asp834x_setup_arch,
-	.init_IRQ		= asp834x_init_IRQ,
+	.init_IRQ		= mpc83xx_ipic_init_IRQ,
 	.get_irq		= ipic_get_irq,
 	.restart		= mpc83xx_restart,
 	.time_init		= mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/km83xx.c b/arch/powerpc/platforms/83xx/km83xx.c
index c55129f..65eb792 100644
--- a/arch/powerpc/platforms/83xx/km83xx.c
+++ b/arch/powerpc/platforms/83xx/km83xx.c
@@ -51,15 +51,14 @@
  */
 static void __init mpc83xx_km_setup_arch(void)
 {
+#ifdef CONFIG_QUICC_ENGINE
 	struct device_node *np;
+#endif
 
 	if (ppc_md.progress)
 		ppc_md.progress("kmpbec83xx_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
-		mpc83xx_add_bridge(np);
-#endif
+	mpc83xx_setup_pci();
 
 #ifdef CONFIG_QUICC_ENGINE
 	qe_reset();
@@ -122,54 +121,7 @@ static void __init mpc83xx_km_setup_arch(void)
 #endif				/* CONFIG_QUICC_ENGINE */
 }
 
-static struct of_device_id kmpbec83xx_ids[] = {
-	{ .type = "soc", },
-	{ .compatible = "soc", },
-	{ .compatible = "simple-bus", },
-	{ .type = "qe", },
-	{ .compatible = "fsl,qe", },
-	{},
-};
-
-static int __init kmeter_declare_of_platform_devices(void)
-{
-	/* Publish the QE devices */
-	of_platform_bus_probe(NULL, kmpbec83xx_ids, NULL);
-
-	return 0;
-}
-machine_device_initcall(mpc83xx_km, kmeter_declare_of_platform_devices);
-
-static void __init mpc83xx_km_init_IRQ(void)
-{
-	struct device_node *np;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,pq2pro-pic");
-	if (!np) {
-		np = of_find_node_by_type(NULL, "ipic");
-		if (!np)
-			return;
-	}
-
-	ipic_init(np, 0);
-
-	/* Initialize the default interrupt mapping priorities,
-	 * in case the boot rom changed something on us.
-	 */
-	ipic_set_default_priority();
-	of_node_put(np);
-
-#ifdef CONFIG_QUICC_ENGINE
-	np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
-	if (!np) {
-		np = of_find_node_by_type(NULL, "qeic");
-		if (!np)
-			return;
-	}
-	qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
-	of_node_put(np);
-#endif				/* CONFIG_QUICC_ENGINE */
-}
+machine_device_initcall(mpc83xx_km, mpc83xx_declare_of_platform_devices);
 
 /* list of the supported boards */
 static char *board[] __initdata = {
@@ -198,7 +150,7 @@ define_machine(mpc83xx_km) {
 	.name		= "mpc83xx-km-platform",
 	.probe		= mpc83xx_km_probe,
 	.setup_arch	= mpc83xx_km_setup_arch,
-	.init_IRQ	= mpc83xx_km_init_IRQ,
+	.init_IRQ	= mpc83xx_ipic_and_qe_init_IRQ,
 	.get_irq	= ipic_get_irq,
 	.restart	= mpc83xx_restart,
 	.time_init	= mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/misc.c b/arch/powerpc/platforms/83xx/misc.c
index f01806c..125336f 100644
--- a/arch/powerpc/platforms/83xx/misc.c
+++ b/arch/powerpc/platforms/83xx/misc.c
@@ -11,10 +11,15 @@
 
 #include <linux/stddef.h>
 #include <linux/kernel.h>
+#include <linux/of_platform.h>
+#include <linux/pci.h>
 
 #include <asm/io.h>
 #include <asm/hw_irq.h>
+#include <asm/ipic.h>
+#include <asm/qe_ic.h>
 #include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
 
 #include "mpc83xx.h"
 
@@ -65,3 +70,75 @@ long __init mpc83xx_time_init(void)
 
 	return 0;
 }
+
+void __init mpc83xx_ipic_init_IRQ(void)
+{
+	struct device_node *np;
+
+	/* looking for fsl,pq2pro-pic which is asl compatible with fsl,ipic */
+	np = of_find_compatible_node(NULL, NULL, "fsl,ipic");
+	if (!np)
+		np = of_find_node_by_type(NULL, "ipic");
+	if (!np)
+		return;
+
+	ipic_init(np, 0);
+
+	of_node_put(np);
+
+	/* Initialize the default interrupt mapping priorities,
+	 * in case the boot rom changed something on us.
+	 */
+	ipic_set_default_priority();
+}
+
+#ifdef CONFIG_QUICC_ENGINE
+void __init mpc83xx_qe_init_IRQ(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
+	if (!np) {
+		np = of_find_node_by_type(NULL, "qeic");
+		if (!np)
+			return;
+	}
+	qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
+	of_node_put(np);
+}
+
+void __init mpc83xx_ipic_and_qe_init_IRQ(void)
+{
+	mpc83xx_ipic_init_IRQ();
+	mpc83xx_qe_init_IRQ();
+}
+#endif /* CONFIG_QUICC_ENGINE */
+
+static struct of_device_id __initdata of_bus_ids[] = {
+	{ .type = "soc", },
+	{ .compatible = "soc", },
+	{ .compatible = "simple-bus" },
+	{ .compatible = "gianfar" },
+	{ .compatible = "gpio-leds", },
+	{ .type = "qe", },
+	{ .compatible = "fsl,qe", },
+	{},
+};
+
+int __init mpc83xx_declare_of_platform_devices(void)
+{
+	of_platform_bus_probe(NULL, of_bus_ids, NULL);
+	return 0;
+}
+
+#ifdef CONFIG_PCI
+void __init mpc83xx_setup_pci(void)
+{
+	struct device_node *np;
+
+	for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
+		mpc83xx_add_bridge(np);
+	for_each_compatible_node(np, "pci", "fsl,mpc8314-pcie")
+		mpc83xx_add_bridge(np);
+}
+#endif
diff --git a/arch/powerpc/platforms/83xx/mpc830x_rdb.c b/arch/powerpc/platforms/83xx/mpc830x_rdb.c
index d0c4e15..4f2d9fe 100644
--- a/arch/powerpc/platforms/83xx/mpc830x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc830x_rdb.c
@@ -27,36 +27,13 @@
  */
 static void __init mpc830x_rdb_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-
 	if (ppc_md.progress)
 		ppc_md.progress("mpc830x_rdb_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8308-pcie")
-		mpc83xx_add_bridge(np);
-#endif
+	mpc83xx_setup_pci();
 	mpc831x_usb_cfg();
 }
 
-static void __init mpc830x_rdb_init_IRQ(void)
-{
-	struct device_node *np;
-
-	np = of_find_node_by_type(NULL, "ipic");
-	if (!np)
-		return;
-
-	ipic_init(np, 0);
-
-	/* Initialize the default interrupt mapping priorities,
-	 * in case the boot rom changed something on us.
-	 */
-	ipic_set_default_priority();
-}
-
 static const char *board[] __initdata = {
 	"MPC8308RDB",
 	"fsl,mpc8308rdb",
@@ -72,24 +49,13 @@ static int __init mpc830x_rdb_probe(void)
 	return of_flat_dt_match(of_get_flat_dt_root(), board);
 }
 
-static struct of_device_id __initdata of_bus_ids[] = {
-	{ .compatible = "simple-bus" },
-	{ .compatible = "gianfar" },
-	{},
-};
-
-static int __init declare_of_platform_devices(void)
-{
-	of_platform_bus_probe(NULL, of_bus_ids, NULL);
-	return 0;
-}
-machine_device_initcall(mpc830x_rdb, declare_of_platform_devices);
+machine_device_initcall(mpc830x_rdb, mpc83xx_declare_of_platform_devices);
 
 define_machine(mpc830x_rdb) {
 	.name			= "MPC830x RDB",
 	.probe			= mpc830x_rdb_probe,
 	.setup_arch		= mpc830x_rdb_setup_arch,
-	.init_IRQ		= mpc830x_rdb_init_IRQ,
+	.init_IRQ		= mpc83xx_ipic_init_IRQ,
 	.get_irq		= ipic_get_irq,
 	.restart		= mpc83xx_restart,
 	.time_init		= mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc831x_rdb.c b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
index f859ead..fa25977 100644
--- a/arch/powerpc/platforms/83xx/mpc831x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
@@ -28,38 +28,13 @@
  */
 static void __init mpc831x_rdb_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-
 	if (ppc_md.progress)
 		ppc_md.progress("mpc831x_rdb_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
-		mpc83xx_add_bridge(np);
-	for_each_compatible_node(np, "pci", "fsl,mpc8314-pcie")
-		mpc83xx_add_bridge(np);
-#endif
+	mpc83xx_setup_pci();
 	mpc831x_usb_cfg();
 }
 
-static void __init mpc831x_rdb_init_IRQ(void)
-{
-	struct device_node *np;
-
-	np = of_find_node_by_type(NULL, "ipic");
-	if (!np)
-		return;
-
-	ipic_init(np, 0);
-
-	/* Initialize the default interrupt mapping priorities,
-	 * in case the boot rom changed something on us.
-	 */
-	ipic_set_default_priority();
-}
-
 static const char *board[] __initdata = {
 	"MPC8313ERDB",
 	"fsl,mpc8315erdb",
@@ -74,25 +49,13 @@ static int __init mpc831x_rdb_probe(void)
 	return of_flat_dt_match(of_get_flat_dt_root(), board);
 }
 
-static struct of_device_id __initdata of_bus_ids[] = {
-	{ .compatible = "simple-bus" },
-	{ .compatible = "gianfar" },
-	{ .compatible = "gpio-leds", },
-	{},
-};
-
-static int __init declare_of_platform_devices(void)
-{
-	of_platform_bus_probe(NULL, of_bus_ids, NULL);
-	return 0;
-}
-machine_device_initcall(mpc831x_rdb, declare_of_platform_devices);
+machine_device_initcall(mpc831x_rdb, mpc83xx_declare_of_platform_devices);
 
 define_machine(mpc831x_rdb) {
 	.name			= "MPC831x RDB",
 	.probe			= mpc831x_rdb_probe,
 	.setup_arch		= mpc831x_rdb_setup_arch,
-	.init_IRQ		= mpc831x_rdb_init_IRQ,
+	.init_IRQ		= mpc83xx_ipic_init_IRQ,
 	.get_irq		= ipic_get_irq,
 	.restart		= mpc83xx_restart,
 	.time_init		= mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c
index 32a5289..e36bc61 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c
@@ -72,10 +72,7 @@ static void __init mpc832x_sys_setup_arch(void)
 		of_node_put(np);
 	}
 
-#ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
-		mpc83xx_add_bridge(np);
-#endif
+	mpc83xx_setup_pci();
 
 #ifdef CONFIG_QUICC_ENGINE
 	qe_reset();
@@ -101,51 +98,7 @@ static void __init mpc832x_sys_setup_arch(void)
 #endif				/* CONFIG_QUICC_ENGINE */
 }
 
-static struct of_device_id mpc832x_ids[] = {
-	{ .type = "soc", },
-	{ .compatible = "soc", },
-	{ .compatible = "simple-bus", },
-	{ .type = "qe", },
-	{ .compatible = "fsl,qe", },
-	{},
-};
-
-static int __init mpc832x_declare_of_platform_devices(void)
-{
-	/* Publish the QE devices */
-	of_platform_bus_probe(NULL, mpc832x_ids, NULL);
-
-	return 0;
-}
-machine_device_initcall(mpc832x_mds, mpc832x_declare_of_platform_devices);
-
-static void __init mpc832x_sys_init_IRQ(void)
-{
-	struct device_node *np;
-
-	np = of_find_node_by_type(NULL, "ipic");
-	if (!np)
-		return;
-
-	ipic_init(np, 0);
-
-	/* Initialize the default interrupt mapping priorities,
-	 * in case the boot rom changed something on us.
-	 */
-	ipic_set_default_priority();
-	of_node_put(np);
-
-#ifdef CONFIG_QUICC_ENGINE
-	np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
-	if (!np) {
-		np = of_find_node_by_type(NULL, "qeic");
-		if (!np)
-			return;
-	}
-	qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
-	of_node_put(np);
-#endif				/* CONFIG_QUICC_ENGINE */
-}
+machine_device_initcall(mpc832x_mds, mpc83xx_declare_of_platform_devices);
 
 /*
  * Called very early, MMU is off, device-tree isn't unflattened
@@ -161,7 +114,7 @@ define_machine(mpc832x_mds) {
 	.name 		= "MPC832x MDS",
 	.probe 		= mpc832x_sys_probe,
 	.setup_arch 	= mpc832x_sys_setup_arch,
-	.init_IRQ 	= mpc832x_sys_init_IRQ,
+	.init_IRQ	= mpc83xx_ipic_and_qe_init_IRQ,
 	.get_irq 	= ipic_get_irq,
 	.restart 	= mpc83xx_restart,
 	.time_init 	= mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
index 17f9974..eff5baa 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
@@ -193,17 +193,14 @@ machine_device_initcall(mpc832x_rdb, mpc832x_spi_init);
  */
 static void __init mpc832x_rdb_setup_arch(void)
 {
-#if defined(CONFIG_PCI) || defined(CONFIG_QUICC_ENGINE)
+#if defined(CONFIG_QUICC_ENGINE)
 	struct device_node *np;
 #endif
 
 	if (ppc_md.progress)
 		ppc_md.progress("mpc832x_rdb_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
-		mpc83xx_add_bridge(np);
-#endif
+	mpc83xx_setup_pci();
 
 #ifdef CONFIG_QUICC_ENGINE
 	qe_reset();
@@ -218,52 +215,7 @@ static void __init mpc832x_rdb_setup_arch(void)
 #endif				/* CONFIG_QUICC_ENGINE */
 }
 
-static struct of_device_id mpc832x_ids[] = {
-	{ .type = "soc", },
-	{ .compatible = "soc", },
-	{ .compatible = "simple-bus", },
-	{ .type = "qe", },
-	{ .compatible = "fsl,qe", },
-	{},
-};
-
-static int __init mpc832x_declare_of_platform_devices(void)
-{
-	/* Publish the QE devices */
-	of_platform_bus_probe(NULL, mpc832x_ids, NULL);
-
-	return 0;
-}
-machine_device_initcall(mpc832x_rdb, mpc832x_declare_of_platform_devices);
-
-static void __init mpc832x_rdb_init_IRQ(void)
-{
-
-	struct device_node *np;
-
-	np = of_find_node_by_type(NULL, "ipic");
-	if (!np)
-		return;
-
-	ipic_init(np, 0);
-
-	/* Initialize the default interrupt mapping priorities,
-	 * in case the boot rom changed something on us.
-	 */
-	ipic_set_default_priority();
-	of_node_put(np);
-
-#ifdef CONFIG_QUICC_ENGINE
-	np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
-	if (!np) {
-		np = of_find_node_by_type(NULL, "qeic");
-		if (!np)
-			return;
-	}
-	qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
-	of_node_put(np);
-#endif				/* CONFIG_QUICC_ENGINE */
-}
+machine_device_initcall(mpc832x_rdb, mpc83xx_declare_of_platform_devices);
 
 /*
  * Called very early, MMU is off, device-tree isn't unflattened
@@ -279,7 +231,7 @@ define_machine(mpc832x_rdb) {
 	.name		= "MPC832x RDB",
 	.probe		= mpc832x_rdb_probe,
 	.setup_arch	= mpc832x_rdb_setup_arch,
-	.init_IRQ	= mpc832x_rdb_init_IRQ,
+	.init_IRQ	= mpc83xx_ipic_and_qe_init_IRQ,
 	.get_irq	= ipic_get_irq,
 	.restart	= mpc83xx_restart,
 	.time_init	= mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c
index 6b45969..39849dd 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_itx.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c
@@ -41,13 +41,12 @@
 
 static struct of_device_id __initdata mpc834x_itx_ids[] = {
 	{ .compatible = "fsl,pq2pro-localbus", },
-	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
 	{},
 };
 
 static int __init mpc834x_itx_declare_of_platform_devices(void)
 {
+	mpc83xx_declare_of_platform_devices();
 	return of_platform_bus_probe(NULL, mpc834x_itx_ids, NULL);
 }
 machine_device_initcall(mpc834x_itx, mpc834x_itx_declare_of_platform_devices);
@@ -59,37 +58,14 @@ machine_device_initcall(mpc834x_itx, mpc834x_itx_declare_of_platform_devices);
  */
 static void __init mpc834x_itx_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-
 	if (ppc_md.progress)
 		ppc_md.progress("mpc834x_itx_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
-		mpc83xx_add_bridge(np);
-#endif
+	mpc83xx_setup_pci();
 
 	mpc834x_usb_cfg();
 }
 
-static void __init mpc834x_itx_init_IRQ(void)
-{
-	struct device_node *np;
-
-	np = of_find_node_by_type(NULL, "ipic");
-	if (!np)
-		return;
-
-	ipic_init(np, 0);
-
-	/* Initialize the default interrupt mapping priorities,
-	 * in case the boot rom changed something on us.
-	 */
-	ipic_set_default_priority();
-}
-
 /*
  * Called very early, MMU is off, device-tree isn't unflattened
  */
@@ -104,7 +80,7 @@ define_machine(mpc834x_itx) {
 	.name			= "MPC834x ITX",
 	.probe			= mpc834x_itx_probe,
 	.setup_arch		= mpc834x_itx_setup_arch,
-	.init_IRQ		= mpc834x_itx_init_IRQ,
+	.init_IRQ		= mpc83xx_ipic_init_IRQ,
 	.get_irq		= ipic_get_irq,
 	.restart		= mpc83xx_restart,
 	.time_init		= mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc834x_mds.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c
index 041c517..5828d8e 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c
@@ -77,51 +77,15 @@ static int mpc834xemds_usb_cfg(void)
  */
 static void __init mpc834x_mds_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-
 	if (ppc_md.progress)
 		ppc_md.progress("mpc834x_mds_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
-		mpc83xx_add_bridge(np);
-#endif
+	mpc83xx_setup_pci();
 
 	mpc834xemds_usb_cfg();
 }
 
-static void __init mpc834x_mds_init_IRQ(void)
-{
-	struct device_node *np;
-
-	np = of_find_node_by_type(NULL, "ipic");
-	if (!np)
-		return;
-
-	ipic_init(np, 0);
-
-	/* Initialize the default interrupt mapping priorities,
-	 * in case the boot rom changed something on us.
-	 */
-	ipic_set_default_priority();
-}
-
-static struct of_device_id mpc834x_ids[] = {
-	{ .type = "soc", },
-	{ .compatible = "soc", },
-	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
-	{},
-};
-
-static int __init mpc834x_declare_of_platform_devices(void)
-{
-	of_platform_bus_probe(NULL, mpc834x_ids, NULL);
-	return 0;
-}
-machine_device_initcall(mpc834x_mds, mpc834x_declare_of_platform_devices);
+machine_device_initcall(mpc834x_mds, mpc83xx_declare_of_platform_devices);
 
 /*
  * Called very early, MMU is off, device-tree isn't unflattened
@@ -137,7 +101,7 @@ define_machine(mpc834x_mds) {
 	.name			= "MPC834x MDS",
 	.probe			= mpc834x_mds_probe,
 	.setup_arch		= mpc834x_mds_setup_arch,
-	.init_IRQ		= mpc834x_mds_init_IRQ,
+	.init_IRQ		= mpc83xx_ipic_init_IRQ,
 	.get_irq		= ipic_get_irq,
 	.restart		= mpc83xx_restart,
 	.time_init		= mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc836x_mds.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c
index 934cc8c4..ad8e4bc 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c
@@ -80,10 +80,7 @@ static void __init mpc836x_mds_setup_arch(void)
 		of_node_put(np);
 	}
 
-#ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
-		mpc83xx_add_bridge(np);
-#endif
+	mpc83xx_setup_pci();
 
 #ifdef CONFIG_QUICC_ENGINE
 	qe_reset();
@@ -144,23 +141,7 @@ static void __init mpc836x_mds_setup_arch(void)
 #endif				/* CONFIG_QUICC_ENGINE */
 }
 
-static struct of_device_id mpc836x_ids[] = {
-	{ .type = "soc", },
-	{ .compatible = "soc", },
-	{ .compatible = "simple-bus", },
-	{ .type = "qe", },
-	{ .compatible = "fsl,qe", },
-	{},
-};
-
-static int __init mpc836x_declare_of_platform_devices(void)
-{
-	/* Publish the QE devices */
-	of_platform_bus_probe(NULL, mpc836x_ids, NULL);
-
-	return 0;
-}
-machine_device_initcall(mpc836x_mds, mpc836x_declare_of_platform_devices);
+machine_device_initcall(mpc836x_mds, mpc83xx_declare_of_platform_devices);
 
 #ifdef CONFIG_QE_USB
 static int __init mpc836x_usb_cfg(void)
@@ -226,34 +207,6 @@ err:
 machine_arch_initcall(mpc836x_mds, mpc836x_usb_cfg);
 #endif /* CONFIG_QE_USB */
 
-static void __init mpc836x_mds_init_IRQ(void)
-{
-	struct device_node *np;
-
-	np = of_find_node_by_type(NULL, "ipic");
-	if (!np)
-		return;
-
-	ipic_init(np, 0);
-
-	/* Initialize the default interrupt mapping priorities,
-	 * in case the boot rom changed something on us.
-	 */
-	ipic_set_default_priority();
-	of_node_put(np);
-
-#ifdef CONFIG_QUICC_ENGINE
-	np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
-	if (!np) {
-		np = of_find_node_by_type(NULL, "qeic");
-		if (!np)
-			return;
-	}
-	qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
-	of_node_put(np);
-#endif				/* CONFIG_QUICC_ENGINE */
-}
-
 /*
  * Called very early, MMU is off, device-tree isn't unflattened
  */
@@ -268,7 +221,7 @@ define_machine(mpc836x_mds) {
 	.name		= "MPC836x MDS",
 	.probe		= mpc836x_mds_probe,
 	.setup_arch	= mpc836x_mds_setup_arch,
-	.init_IRQ	= mpc836x_mds_init_IRQ,
+	.init_IRQ	= mpc83xx_ipic_and_qe_init_IRQ,
 	.get_irq	= ipic_get_irq,
 	.restart	= mpc83xx_restart,
 	.time_init	= mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc836x_rdk.c b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
index b0090aa..f8769d7 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_rdk.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
@@ -27,61 +27,19 @@
 
 #include "mpc83xx.h"
 
-static struct of_device_id __initdata mpc836x_rdk_ids[] = {
-	{ .compatible = "simple-bus", },
-	{},
-};
-
-static int __init mpc836x_rdk_declare_of_platform_devices(void)
-{
-	return of_platform_bus_probe(NULL, mpc836x_rdk_ids, NULL);
-}
-machine_device_initcall(mpc836x_rdk, mpc836x_rdk_declare_of_platform_devices);
+machine_device_initcall(mpc836x_rdk, mpc83xx_declare_of_platform_devices);
 
 static void __init mpc836x_rdk_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-
 	if (ppc_md.progress)
 		ppc_md.progress("mpc836x_rdk_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
-		mpc83xx_add_bridge(np);
-#endif
+	mpc83xx_setup_pci();
 #ifdef CONFIG_QUICC_ENGINE
 	qe_reset();
 #endif
 }
 
-static void __init mpc836x_rdk_init_IRQ(void)
-{
-	struct device_node *np;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,ipic");
-	if (!np)
-		return;
-
-	ipic_init(np, 0);
-
-	/*
-	 * Initialize the default interrupt mapping priorities,
-	 * in case the boot rom changed something on us.
-	 */
-	ipic_set_default_priority();
-	of_node_put(np);
-#ifdef CONFIG_QUICC_ENGINE
-	np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
-	if (!np)
-		return;
-
-	qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
-	of_node_put(np);
-#endif
-}
-
 /*
  * Called very early, MMU is off, device-tree isn't unflattened.
  */
@@ -96,7 +54,7 @@ define_machine(mpc836x_rdk) {
 	.name		= "MPC836x RDK",
 	.probe		= mpc836x_rdk_probe,
 	.setup_arch	= mpc836x_rdk_setup_arch,
-	.init_IRQ	= mpc836x_rdk_init_IRQ,
+	.init_IRQ	= mpc83xx_ipic_and_qe_init_IRQ,
 	.get_irq	= ipic_get_irq,
 	.restart	= mpc83xx_restart,
 	.time_init	= mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc837x_mds.c b/arch/powerpc/platforms/83xx/mpc837x_mds.c
index 8306832..e53a60b 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_mds.c
@@ -79,54 +79,14 @@ out:
  */
 static void __init mpc837x_mds_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-
 	if (ppc_md.progress)
 		ppc_md.progress("mpc837x_mds_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
-		mpc83xx_add_bridge(np);
-	for_each_compatible_node(np, "pci", "fsl,mpc8314-pcie")
-		mpc83xx_add_bridge(np);
-#endif
+	mpc83xx_setup_pci();
 	mpc837xmds_usb_cfg();
 }
 
-static struct of_device_id mpc837x_ids[] = {
-	{ .type = "soc", },
-	{ .compatible = "soc", },
-	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
-	{},
-};
-
-static int __init mpc837x_declare_of_platform_devices(void)
-{
-	/* Publish platform_device */
-	of_platform_bus_probe(NULL, mpc837x_ids, NULL);
-
-	return 0;
-}
-machine_device_initcall(mpc837x_mds, mpc837x_declare_of_platform_devices);
-
-static void __init mpc837x_mds_init_IRQ(void)
-{
-	struct device_node *np;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,ipic");
-	if (!np)
-		return;
-
-	ipic_init(np, 0);
-
-	/* Initialize the default interrupt mapping priorities,
-	 * in case the boot rom changed something on us.
-	 */
-	ipic_set_default_priority();
-}
+machine_device_initcall(mpc837x_mds, mpc83xx_declare_of_platform_devices);
 
 /*
  * Called very early, MMU is off, device-tree isn't unflattened
@@ -142,7 +102,7 @@ define_machine(mpc837x_mds) {
 	.name			= "MPC837x MDS",
 	.probe			= mpc837x_mds_probe,
 	.setup_arch		= mpc837x_mds_setup_arch,
-	.init_IRQ		= mpc837x_mds_init_IRQ,
+	.init_IRQ		= mpc83xx_ipic_init_IRQ,
 	.get_irq		= ipic_get_irq,
 	.restart		= mpc83xx_restart,
 	.time_init		= mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc837x_rdb.c b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
index 7bafbf2..16c9c9c 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
@@ -50,56 +50,15 @@ static void mpc837x_rdb_sd_cfg(void)
  */
 static void __init mpc837x_rdb_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-
 	if (ppc_md.progress)
 		ppc_md.progress("mpc837x_rdb_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
-		mpc83xx_add_bridge(np);
-	for_each_compatible_node(np, "pci", "fsl,mpc8314-pcie")
-		mpc83xx_add_bridge(np);
-#endif
+	mpc83xx_setup_pci();
 	mpc837x_usb_cfg();
 	mpc837x_rdb_sd_cfg();
 }
 
-static struct of_device_id mpc837x_ids[] = {
-	{ .type = "soc", },
-	{ .compatible = "soc", },
-	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
-	{ .compatible = "gpio-leds", },
-	{},
-};
-
-static int __init mpc837x_declare_of_platform_devices(void)
-{
-	/* Publish platform_device */
-	of_platform_bus_probe(NULL, mpc837x_ids, NULL);
-
-	return 0;
-}
-machine_device_initcall(mpc837x_rdb, mpc837x_declare_of_platform_devices);
-
-static void __init mpc837x_rdb_init_IRQ(void)
-{
-	struct device_node *np;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,ipic");
-	if (!np)
-		return;
-
-	ipic_init(np, 0);
-
-	/* Initialize the default interrupt mapping priorities,
-	 * in case the boot rom changed something on us.
-	 */
-	ipic_set_default_priority();
-}
+machine_device_initcall(mpc837x_rdb, mpc83xx_declare_of_platform_devices);
 
 static const char *board[] __initdata = {
 	"fsl,mpc8377rdb",
@@ -121,7 +80,7 @@ define_machine(mpc837x_rdb) {
 	.name			= "MPC837x RDB/WLAN",
 	.probe			= mpc837x_rdb_probe,
 	.setup_arch		= mpc837x_rdb_setup_arch,
-	.init_IRQ		= mpc837x_rdb_init_IRQ,
+	.init_IRQ		= mpc83xx_ipic_init_IRQ,
 	.get_irq		= ipic_get_irq,
 	.restart		= mpc83xx_restart,
 	.time_init		= mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h
index 82a4345..0cf74d7 100644
--- a/arch/powerpc/platforms/83xx/mpc83xx.h
+++ b/arch/powerpc/platforms/83xx/mpc83xx.h
@@ -70,5 +70,21 @@ extern long mpc83xx_time_init(void);
 extern int mpc837x_usb_cfg(void);
 extern int mpc834x_usb_cfg(void);
 extern int mpc831x_usb_cfg(void);
+extern void mpc83xx_ipic_init_IRQ(void);
+#ifdef CONFIG_QUICC_ENGINE
+extern void mpc83xx_qe_init_IRQ(void);
+extern void mpc83xx_ipic_and_qe_init_IRQ(void);
+#else
+static inline void __init mpc83xx_qe_init_IRQ(void) {}
+#define mpc83xx_ipic_and_qe_init_IRQ mpc83xx_ipic_init_IRQ
+#endif /* CONFIG_QUICC_ENGINE */
+
+#ifdef CONFIG_PCI
+extern void mpc83xx_setup_pci(void);
+#else
+#define mpc83xx_setup_pci()	do {} while (0)
+#endif
+
+extern int mpc83xx_declare_of_platform_devices(void);
 
 #endif				/* __MPC83XX_H__ */
diff --git a/arch/powerpc/platforms/83xx/sbc834x.c b/arch/powerpc/platforms/83xx/sbc834x.c
index af41d8c..8a81d76 100644
--- a/arch/powerpc/platforms/83xx/sbc834x.c
+++ b/arch/powerpc/platforms/83xx/sbc834x.c
@@ -48,52 +48,13 @@
  */
 static void __init sbc834x_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-
 	if (ppc_md.progress)
 		ppc_md.progress("sbc834x_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
-		mpc83xx_add_bridge(np);
-#endif
-
+	mpc83xx_setup_pci();
 }
 
-static void __init sbc834x_init_IRQ(void)
-{
-	struct device_node *np;
-
-	np = of_find_node_by_type(NULL, "ipic");
-	if (!np)
-		return;
-
-	ipic_init(np, 0);
-
-	/* Initialize the default interrupt mapping priorities,
-	 * in case the boot rom changed something on us.
-	 */
-	ipic_set_default_priority();
-
-	of_node_put(np);
-}
-
-static struct __initdata of_device_id sbc834x_ids[] = {
-	{ .type = "soc", },
-	{ .compatible = "soc", },
-	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
-	{},
-};
-
-static int __init sbc834x_declare_of_platform_devices(void)
-{
-	of_platform_bus_probe(NULL, sbc834x_ids, NULL);
-	return 0;
-}
-machine_device_initcall(sbc834x, sbc834x_declare_of_platform_devices);
+machine_device_initcall(sbc834x, mpc83xx_declare_of_platform_devices);
 
 /*
  * Called very early, MMU is off, device-tree isn't unflattened
@@ -102,14 +63,14 @@ static int __init sbc834x_probe(void)
 {
 	unsigned long root = of_get_flat_dt_root();
 
-	return of_flat_dt_is_compatible(root, "SBC834x");
+	return of_flat_dt_is_compatible(root, "SBC834xE");
 }
 
 define_machine(sbc834x) {
-	.name			= "SBC834x",
+	.name			= "SBC834xE",
 	.probe			= sbc834x_probe,
 	.setup_arch		= sbc834x_setup_arch,
-	.init_IRQ		= sbc834x_init_IRQ,
+	.init_IRQ		= mpc83xx_ipic_init_IRQ,
 	.get_irq		= ipic_get_irq,
 	.restart		= mpc83xx_restart,
 	.time_init		= mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index bc5acb9..9cb2d43 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -3,6 +3,8 @@
 #
 obj-$(CONFIG_SMP) += smp.o
 
+obj-y += common.o
+
 obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
 obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
 obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o
diff --git a/arch/powerpc/platforms/85xx/common.c b/arch/powerpc/platforms/85xx/common.c
new file mode 100644
index 0000000..9fef530
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/common.c
@@ -0,0 +1,66 @@
+/*
+ * Routines common to most mpc85xx-based boards.
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/of_platform.h>
+
+#include <sysdev/cpm2_pic.h>
+
+#include "mpc85xx.h"
+
+static struct of_device_id __initdata mpc85xx_common_ids[] = {
+	{ .type = "soc", },
+	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
+	{ .name = "cpm", },
+	{ .name = "localbus", },
+	{ .compatible = "gianfar", },
+	{ .compatible = "fsl,qe", },
+	{ .compatible = "fsl,cpm2", },
+	{ .compatible = "fsl,srio", },
+	{},
+};
+
+int __init mpc85xx_common_publish_devices(void)
+{
+	return of_platform_bus_probe(NULL, mpc85xx_common_ids, NULL);
+}
+#ifdef CONFIG_CPM2
+static void cpm2_cascade(unsigned int irq, struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	int cascade_irq;
+
+	while ((cascade_irq = cpm2_get_irq()) >= 0)
+		generic_handle_irq(cascade_irq);
+
+	chip->irq_eoi(&desc->irq_data);
+}
+
+
+void __init mpc85xx_cpm2_pic_init(void)
+{
+	struct device_node *np;
+	int irq;
+
+	/* Setup CPM2 PIC */
+	np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic");
+	if (np == NULL) {
+		printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n");
+		return;
+	}
+	irq = irq_of_parse_and_map(np, 0);
+	if (irq == NO_IRQ) {
+		of_node_put(np);
+		printk(KERN_ERR "PIC init: got no IRQ for cpm cascade\n");
+		return;
+	}
+
+	cpm2_pic_init(np);
+	of_node_put(np);
+	irq_set_chained_handler(irq, cpm2_cascade);
+}
+#endif
diff --git a/arch/powerpc/platforms/85xx/corenet_ds.c b/arch/powerpc/platforms/85xx/corenet_ds.c
index 802ad11..07e3e6c 100644
--- a/arch/powerpc/platforms/85xx/corenet_ds.c
+++ b/arch/powerpc/platforms/85xx/corenet_ds.c
@@ -31,32 +31,18 @@
 #include <linux/of_platform.h>
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
+#include "smp.h"
 
 void __init corenet_ds_pic_init(void)
 {
 	struct mpic *mpic;
-	struct resource r;
-	struct device_node *np = NULL;
-	unsigned int flags = MPIC_PRIMARY | MPIC_BIG_ENDIAN |
+	unsigned int flags = MPIC_BIG_ENDIAN |
 				MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU;
 
-	np = of_find_node_by_type(np, "open-pic");
-
-	if (np == NULL) {
-		printk(KERN_ERR "Could not find open-pic node\n");
-		return;
-	}
-
-	if (of_address_to_resource(np, 0, &r)) {
-		printk(KERN_ERR "Failed to map mpic register space\n");
-		of_node_put(np);
-		return;
-	}
-
 	if (ppc_md.get_irq == mpic_get_coreint_irq)
 		flags |= MPIC_ENABLE_COREINT;
 
-	mpic = mpic_alloc(np, r.start, flags, 0, 256, " OpenPIC  ");
+	mpic = mpic_alloc(NULL, 0, flags, 0, 256, " OpenPIC  ");
 	BUG_ON(mpic == NULL);
 
 	mpic_init(mpic);
@@ -65,10 +51,6 @@ void __init corenet_ds_pic_init(void)
 /*
  * Setup the architecture
  */
-#ifdef CONFIG_SMP
-void __init mpc85xx_smp_init(void);
-#endif
-
 void __init corenet_ds_setup_arch(void)
 {
 #ifdef CONFIG_PCI
@@ -77,9 +59,7 @@ void __init corenet_ds_setup_arch(void)
 #endif
 	dma_addr_t max = 0xffffffff;
 
-#ifdef CONFIG_SMP
 	mpc85xx_smp_init();
-#endif
 
 #ifdef CONFIG_PCI
 	for_each_node_by_type(np, "pci") {
@@ -112,7 +92,7 @@ static const struct of_device_id of_device_ids[] __devinitconst = {
 		.compatible	= "simple-bus"
 	},
 	{
-		.compatible	= "fsl,rapidio-delta",
+		.compatible	= "fsl,srio",
 	},
 	{
 		.compatible	= "fsl,p4080-pcie",
diff --git a/arch/powerpc/platforms/85xx/ksi8560.c b/arch/powerpc/platforms/85xx/ksi8560.c
index c46f935..20f75d7 100644
--- a/arch/powerpc/platforms/85xx/ksi8560.c
+++ b/arch/powerpc/platforms/85xx/ksi8560.c
@@ -35,6 +35,7 @@
 #include <asm/cpm2.h>
 #include <sysdev/cpm2_pic.h>
 
+#include "mpc85xx.h"
 
 #define KSI8560_CPLD_HVR		0x04 /* Hardware Version Register */
 #define KSI8560_CPLD_PVR		0x08 /* PLD Version Register */
@@ -54,60 +55,15 @@ static void machine_restart(char *cmd)
 	for (;;);
 }
 
-static void cpm2_cascade(unsigned int irq, struct irq_desc *desc)
-{
-	struct irq_chip *chip = irq_desc_get_chip(desc);
-	int cascade_irq;
-
-	while ((cascade_irq = cpm2_get_irq()) >= 0)
-		generic_handle_irq(cascade_irq);
-
-	chip->irq_eoi(&desc->irq_data);
-}
-
 static void __init ksi8560_pic_init(void)
 {
-	struct mpic *mpic;
-	struct resource r;
-	struct device_node *np;
-#ifdef CONFIG_CPM2
-	int irq;
-#endif
-
-	np = of_find_node_by_type(NULL, "open-pic");
-
-	if (np == NULL) {
-		printk(KERN_ERR "Could not find open-pic node\n");
-		return;
-	}
-
-	if (of_address_to_resource(np, 0, &r)) {
-		printk(KERN_ERR "Could not map mpic register space\n");
-		of_node_put(np);
-		return;
-	}
-
-	mpic = mpic_alloc(np, r.start,
-			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+	struct mpic *mpic = mpic_alloc(NULL, 0,
+			MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
 			0, 256, " OpenPIC  ");
 	BUG_ON(mpic == NULL);
-	of_node_put(np);
-
 	mpic_init(mpic);
 
-#ifdef CONFIG_CPM2
-	/* Setup CPM2 PIC */
-	np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic");
-	if (np == NULL) {
-		printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n");
-		return;
-	}
-	irq = irq_of_parse_and_map(np, 0);
-
-	cpm2_pic_init(np);
-	of_node_put(np);
-	irq_set_chained_handler(irq, cpm2_cascade);
-#endif
+	mpc85xx_cpm2_pic_init();
 }
 
 #ifdef CONFIG_CPM2
@@ -215,22 +171,7 @@ static void ksi8560_show_cpuinfo(struct seq_file *m)
 	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
 }
 
-static struct of_device_id __initdata of_bus_ids[] = {
-	{ .type = "soc", },
-	{ .type = "simple-bus", },
-	{ .name = "cpm", },
-	{ .name = "localbus", },
-	{ .compatible = "gianfar", },
-	{},
-};
-
-static int __init declare_of_platform_devices(void)
-{
-	of_platform_bus_probe(NULL, of_bus_ids, NULL);
-
-	return 0;
-}
-machine_device_initcall(ksi8560, declare_of_platform_devices);
+machine_device_initcall(ksi8560, mpc85xx_common_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened
diff --git a/arch/powerpc/platforms/85xx/mpc8536_ds.c b/arch/powerpc/platforms/85xx/mpc8536_ds.c
index f79f2f1..cf26682 100644
--- a/arch/powerpc/platforms/85xx/mpc8536_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc8536_ds.c
@@ -32,31 +32,15 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 
+#include "mpc85xx.h"
+
 void __init mpc8536_ds_pic_init(void)
 {
-	struct mpic *mpic;
-	struct resource r;
-	struct device_node *np;
-
-	np = of_find_node_by_type(NULL, "open-pic");
-	if (np == NULL) {
-		printk(KERN_ERR "Could not find open-pic node\n");
-		return;
-	}
-
-	if (of_address_to_resource(np, 0, &r)) {
-		printk(KERN_ERR "Failed to map mpic register space\n");
-		of_node_put(np);
-		return;
-	}
-
-	mpic = mpic_alloc(np, r.start,
-			  MPIC_PRIMARY | MPIC_WANTS_RESET |
+	struct mpic *mpic = mpic_alloc(NULL, 0,
+			  MPIC_WANTS_RESET |
 			  MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS,
 			0, 256, " OpenPIC  ");
 	BUG_ON(mpic == NULL);
-	of_node_put(np);
-
 	mpic_init(mpic);
 }
 
@@ -104,19 +88,7 @@ static void __init mpc8536_ds_setup_arch(void)
 	printk("MPC8536 DS board from Freescale Semiconductor\n");
 }
 
-static struct of_device_id __initdata mpc8536_ds_ids[] = {
-	{ .type = "soc", },
-	{ .compatible = "soc", },
-	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
-	{},
-};
-
-static int __init mpc8536_ds_publish_devices(void)
-{
-	return of_platform_bus_probe(NULL, mpc8536_ds_ids, NULL);
-}
-machine_device_initcall(mpc8536_ds, mpc8536_ds_publish_devices);
+machine_device_initcall(mpc8536_ds, mpc85xx_common_publish_devices);
 
 machine_arch_initcall(mpc8536_ds, swiotlb_setup_bus_notifier);
 
diff --git a/arch/powerpc/platforms/85xx/mpc85xx.h b/arch/powerpc/platforms/85xx/mpc85xx.h
new file mode 100644
index 0000000..2aa7c5d
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/mpc85xx.h
@@ -0,0 +1,11 @@
+#ifndef MPC85xx_H
+#define MPC85xx_H
+extern int mpc85xx_common_publish_devices(void);
+
+#ifdef CONFIG_CPM2
+extern void mpc85xx_cpm2_pic_init(void);
+#else
+static inline void __init mpc85xx_cpm2_pic_init(void) {}
+#endif /* CONFIG_CPM2 */
+
+#endif
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
index 3b2c9bb..3bebb51 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
@@ -35,6 +35,8 @@
 #include <sysdev/cpm2_pic.h>
 #endif
 
+#include "mpc85xx.h"
+
 #ifdef CONFIG_PCI
 static int mpc85xx_exclude_device(struct pci_controller *hose,
 				   u_char bus, u_char devfn)
@@ -46,63 +48,15 @@ static int mpc85xx_exclude_device(struct pci_controller *hose,
 }
 #endif /* CONFIG_PCI */
 
-#ifdef CONFIG_CPM2
-
-static void cpm2_cascade(unsigned int irq, struct irq_desc *desc)
-{
-	struct irq_chip *chip = irq_desc_get_chip(desc);
-	int cascade_irq;
-
-	while ((cascade_irq = cpm2_get_irq()) >= 0)
-		generic_handle_irq(cascade_irq);
-
-	chip->irq_eoi(&desc->irq_data);
-}
-
-#endif /* CONFIG_CPM2 */
-
 static void __init mpc85xx_ads_pic_init(void)
 {
-	struct mpic *mpic;
-	struct resource r;
-	struct device_node *np = NULL;
-#ifdef CONFIG_CPM2
-	int irq;
-#endif
-
-	np = of_find_node_by_type(np, "open-pic");
-	if (!np) {
-		printk(KERN_ERR "Could not find open-pic node\n");
-		return;
-	}
-
-	if (of_address_to_resource(np, 0, &r)) {
-		printk(KERN_ERR "Could not map mpic register space\n");
-		of_node_put(np);
-		return;
-	}
-
-	mpic = mpic_alloc(np, r.start,
-			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+	struct mpic *mpic = mpic_alloc(NULL, 0,
+			MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
 			0, 256, " OpenPIC  ");
 	BUG_ON(mpic == NULL);
-	of_node_put(np);
-
 	mpic_init(mpic);
 
-#ifdef CONFIG_CPM2
-	/* Setup CPM2 PIC */
-	np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic");
-	if (np == NULL) {
-		printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n");
-		return;
-	}
-	irq = irq_of_parse_and_map(np, 0);
-
-	cpm2_pic_init(np);
-	of_node_put(np);
-	irq_set_chained_handler(irq, cpm2_cascade);
-#endif
+	mpc85xx_cpm2_pic_init();
 }
 
 /*
@@ -221,23 +175,7 @@ static void mpc85xx_ads_show_cpuinfo(struct seq_file *m)
 	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
 }
 
-static struct of_device_id __initdata of_bus_ids[] = {
-	{ .name = "soc", },
-	{ .type = "soc", },
-	{ .name = "cpm", },
-	{ .name = "localbus", },
-	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
-	{},
-};
-
-static int __init declare_of_platform_devices(void)
-{
-	of_platform_bus_probe(NULL, of_bus_ids, NULL);
-
-	return 0;
-}
-machine_device_initcall(mpc85xx_ads, declare_of_platform_devices);
+machine_device_initcall(mpc85xx_ads, mpc85xx_common_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
index 66cb8d6..40f03da 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
@@ -46,6 +46,8 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 
+#include "mpc85xx.h"
+
 /* CADMUS info */
 /* xxx - galak, move into device tree */
 #define CADMUS_BASE (0xf8004000)
@@ -177,7 +179,7 @@ static irqreturn_t mpc85xx_8259_cascade_action(int irq, void *dev_id)
 
 static struct irqaction mpc85xxcds_8259_irqaction = {
 	.handler = mpc85xx_8259_cascade_action,
-	.flags = IRQF_SHARED,
+	.flags = IRQF_SHARED | IRQF_NO_THREAD,
 	.name = "8259 cascade",
 };
 #endif /* PPC_I8259 */
@@ -186,30 +188,10 @@ static struct irqaction mpc85xxcds_8259_irqaction = {
 static void __init mpc85xx_cds_pic_init(void)
 {
 	struct mpic *mpic;
-	struct resource r;
-	struct device_node *np = NULL;
-
-	np = of_find_node_by_type(np, "open-pic");
-
-	if (np == NULL) {
-		printk(KERN_ERR "Could not find open-pic node\n");
-		return;
-	}
-
-	if (of_address_to_resource(np, 0, &r)) {
-		printk(KERN_ERR "Failed to map mpic register space\n");
-		of_node_put(np);
-		return;
-	}
-
-	mpic = mpic_alloc(np, r.start,
-			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+	mpic = mpic_alloc(NULL, 0,
+			MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
 			0, 256, " OpenPIC  ");
 	BUG_ON(mpic == NULL);
-
-	/* Return the mpic node */
-	of_node_put(np);
-
 	mpic_init(mpic);
 }
 
@@ -330,19 +312,7 @@ static int __init mpc85xx_cds_probe(void)
         return of_flat_dt_is_compatible(root, "MPC85xxCDS");
 }
 
-static struct of_device_id __initdata of_bus_ids[] = {
-	{ .type = "soc", },
-	{ .compatible = "soc", },
-	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
-	{},
-};
-
-static int __init declare_of_platform_devices(void)
-{
-	return of_platform_bus_probe(NULL, of_bus_ids, NULL);
-}
-machine_device_initcall(mpc85xx_cds, declare_of_platform_devices);
+machine_device_initcall(mpc85xx_cds, mpc85xx_common_publish_devices);
 
 define_machine(mpc85xx_cds) {
 	.name		= "MPC85xx CDS",
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index 1b9a8cf..eefbb91 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -35,6 +35,9 @@
 
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
+#include "smp.h"
+
+#include "mpc85xx.h"
 
 #undef DEBUG
 
@@ -60,43 +63,27 @@ static void mpc85xx_8259_cascade(unsigned int irq, struct irq_desc *desc)
 void __init mpc85xx_ds_pic_init(void)
 {
 	struct mpic *mpic;
-	struct resource r;
-	struct device_node *np;
 #ifdef CONFIG_PPC_I8259
+	struct device_node *np;
 	struct device_node *cascade_node = NULL;
 	int cascade_irq;
 #endif
 	unsigned long root = of_get_flat_dt_root();
 
-	np = of_find_node_by_type(NULL, "open-pic");
-	if (np == NULL) {
-		printk(KERN_ERR "Could not find open-pic node\n");
-		return;
-	}
-
-	if (of_address_to_resource(np, 0, &r)) {
-		printk(KERN_ERR "Failed to map mpic register space\n");
-		of_node_put(np);
-		return;
-	}
-
 	if (of_flat_dt_is_compatible(root, "fsl,MPC8572DS-CAMP")) {
-		mpic = mpic_alloc(np, r.start,
-			MPIC_PRIMARY |
+		mpic = mpic_alloc(NULL, 0,
 			MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS |
 			MPIC_SINGLE_DEST_CPU,
 			0, 256, " OpenPIC  ");
 	} else {
-		mpic = mpic_alloc(np, r.start,
-			  MPIC_PRIMARY | MPIC_WANTS_RESET |
+		mpic = mpic_alloc(NULL, 0,
+			  MPIC_WANTS_RESET |
 			  MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS |
 			  MPIC_SINGLE_DEST_CPU,
 			0, 256, " OpenPIC  ");
 	}
 
 	BUG_ON(mpic == NULL);
-	of_node_put(np);
-
 	mpic_init(mpic);
 
 #ifdef CONFIG_PPC_I8259
@@ -152,9 +139,6 @@ static int mpc85xx_exclude_device(struct pci_controller *hose,
 /*
  * Setup the architecture
  */
-#ifdef CONFIG_SMP
-extern void __init mpc85xx_smp_init(void);
-#endif
 static void __init mpc85xx_ds_setup_arch(void)
 {
 #ifdef CONFIG_PCI
@@ -187,9 +171,7 @@ static void __init mpc85xx_ds_setup_arch(void)
 	ppc_md.pci_exclude_device = mpc85xx_exclude_device;
 #endif
 
-#ifdef CONFIG_SMP
 	mpc85xx_smp_init();
-#endif
 
 #ifdef CONFIG_SWIOTLB
 	if (memblock_end_of_DRAM() > max) {
@@ -219,21 +201,9 @@ static int __init mpc8544_ds_probe(void)
 	return 0;
 }
 
-static struct of_device_id __initdata mpc85xxds_ids[] = {
-	{ .type = "soc", },
-	{ .compatible = "soc", },
-	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
-	{},
-};
-
-static int __init mpc85xxds_publish_devices(void)
-{
-	return of_platform_bus_probe(NULL, mpc85xxds_ids, NULL);
-}
-machine_device_initcall(mpc8544_ds, mpc85xxds_publish_devices);
-machine_device_initcall(mpc8572_ds, mpc85xxds_publish_devices);
-machine_device_initcall(p2020_ds, mpc85xxds_publish_devices);
+machine_device_initcall(mpc8544_ds, mpc85xx_common_publish_devices);
+machine_device_initcall(mpc8572_ds, mpc85xx_common_publish_devices);
+machine_device_initcall(p2020_ds, mpc85xx_common_publish_devices);
 
 machine_arch_initcall(mpc8544_ds, swiotlb_setup_bus_notifier);
 machine_arch_initcall(mpc8572_ds, swiotlb_setup_bus_notifier);
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index a23a3ff..1d15a0c 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -51,6 +51,9 @@
 #include <asm/qe_ic.h>
 #include <asm/mpic.h>
 #include <asm/swiotlb.h>
+#include "smp.h"
+
+#include "mpc85xx.h"
 
 #undef DEBUG
 #ifdef DEBUG
@@ -153,30 +156,7 @@ static int mpc8568_mds_phy_fixups(struct phy_device *phydev)
  * Setup the architecture
  *
  */
-#ifdef CONFIG_SMP
-extern void __init mpc85xx_smp_init(void);
-#endif
-
 #ifdef CONFIG_QUICC_ENGINE
-static struct of_device_id mpc85xx_qe_ids[] __initdata = {
-	{ .type = "qe", },
-	{ .compatible = "fsl,qe", },
-	{ },
-};
-
-static void __init mpc85xx_publish_qe_devices(void)
-{
-	struct device_node *np;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,qe");
-	if (!of_device_is_available(np)) {
-		of_node_put(np);
-		return;
-	}
-
-	of_platform_bus_probe(NULL, mpc85xx_qe_ids, NULL);
-}
-
 static void __init mpc85xx_mds_reset_ucc_phys(void)
 {
 	struct device_node *np;
@@ -347,7 +327,6 @@ static void __init mpc85xx_mds_qeic_init(void)
 	of_node_put(np);
 }
 #else
-static void __init mpc85xx_publish_qe_devices(void) { }
 static void __init mpc85xx_mds_qe_init(void) { }
 static void __init mpc85xx_mds_qeic_init(void) { }
 #endif	/* CONFIG_QUICC_ENGINE */
@@ -381,9 +360,7 @@ static void __init mpc85xx_mds_setup_arch(void)
 	}
 #endif
 
-#ifdef CONFIG_SMP
 	mpc85xx_smp_init();
-#endif
 
 	mpc85xx_mds_qe_init();
 
@@ -429,24 +406,11 @@ machine_arch_initcall(mpc8568_mds, board_fixups);
 machine_arch_initcall(mpc8569_mds, board_fixups);
 
 static struct of_device_id mpc85xx_ids[] = {
-	{ .type = "soc", },
-	{ .compatible = "soc", },
-	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
-	{ .compatible = "fsl,rapidio-delta", },
 	{ .compatible = "fsl,mpc8548-guts", },
 	{ .compatible = "gpio-leds", },
 	{},
 };
 
-static struct of_device_id p1021_ids[] = {
-	{ .type = "soc", },
-	{ .compatible = "soc", },
-	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
-	{},
-};
-
 static int __init mpc85xx_publish_devices(void)
 {
 	if (machine_is(mpc8568_mds))
@@ -454,23 +418,15 @@ static int __init mpc85xx_publish_devices(void)
 	if (machine_is(mpc8569_mds))
 		simple_gpiochip_init("fsl,mpc8569mds-bcsr-gpio");
 
+	mpc85xx_common_publish_devices();
 	of_platform_bus_probe(NULL, mpc85xx_ids, NULL);
-	mpc85xx_publish_qe_devices();
-
-	return 0;
-}
-
-static int __init p1021_publish_devices(void)
-{
-	of_platform_bus_probe(NULL, p1021_ids, NULL);
-	mpc85xx_publish_qe_devices();
 
 	return 0;
 }
 
 machine_device_initcall(mpc8568_mds, mpc85xx_publish_devices);
 machine_device_initcall(mpc8569_mds, mpc85xx_publish_devices);
-machine_device_initcall(p1021_mds, p1021_publish_devices);
+machine_device_initcall(p1021_mds, mpc85xx_common_publish_devices);
 
 machine_arch_initcall(mpc8568_mds, swiotlb_setup_bus_notifier);
 machine_arch_initcall(mpc8569_mds, swiotlb_setup_bus_notifier);
@@ -478,26 +434,11 @@ machine_arch_initcall(p1021_mds, swiotlb_setup_bus_notifier);
 
 static void __init mpc85xx_mds_pic_init(void)
 {
-	struct mpic *mpic;
-	struct resource r;
-	struct device_node *np = NULL;
-
-	np = of_find_node_by_type(NULL, "open-pic");
-	if (!np)
-		return;
-
-	if (of_address_to_resource(np, 0, &r)) {
-		printk(KERN_ERR "Failed to map mpic register space\n");
-		of_node_put(np);
-		return;
-	}
-
-	mpic = mpic_alloc(np, r.start,
-			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN |
+	struct mpic *mpic = mpic_alloc(NULL, 0,
+			MPIC_WANTS_RESET | MPIC_BIG_ENDIAN |
 			MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU,
 			0, 256, " OpenPIC  ");
 	BUG_ON(mpic == NULL);
-	of_node_put(np);
 
 	mpic_init(mpic);
 	mpc85xx_mds_qeic_init();
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
index f5ff911..ccf520e 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
@@ -29,6 +29,9 @@
 
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
+#include "smp.h"
+
+#include "mpc85xx.h"
 
 #undef DEBUG
 
@@ -42,49 +45,28 @@
 void __init mpc85xx_rdb_pic_init(void)
 {
 	struct mpic *mpic;
-	struct resource r;
-	struct device_node *np;
 	unsigned long root = of_get_flat_dt_root();
 
-	np = of_find_node_by_type(NULL, "open-pic");
-	if (np == NULL) {
-		printk(KERN_ERR "Could not find open-pic node\n");
-		return;
-	}
-
-	if (of_address_to_resource(np, 0, &r)) {
-		printk(KERN_ERR "Failed to map mpic register space\n");
-		of_node_put(np);
-		return;
-	}
-
 	if (of_flat_dt_is_compatible(root, "fsl,MPC85XXRDB-CAMP")) {
-		mpic = mpic_alloc(np, r.start,
-			MPIC_PRIMARY |
+		mpic = mpic_alloc(NULL, 0,
 			MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS |
 			MPIC_SINGLE_DEST_CPU,
 			0, 256, " OpenPIC  ");
 	} else {
-		mpic = mpic_alloc(np, r.start,
-		  MPIC_PRIMARY | MPIC_WANTS_RESET |
+		mpic = mpic_alloc(NULL, 0,
+		  MPIC_WANTS_RESET |
 		  MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS |
 		  MPIC_SINGLE_DEST_CPU,
 		  0, 256, " OpenPIC  ");
 	}
 
 	BUG_ON(mpic == NULL);
-	of_node_put(np);
-
 	mpic_init(mpic);
-
 }
 
 /*
  * Setup the architecture
  */
-#ifdef CONFIG_SMP
-extern void __init mpc85xx_smp_init(void);
-#endif
 static void __init mpc85xx_rdb_setup_arch(void)
 {
 #ifdef CONFIG_PCI
@@ -102,27 +84,12 @@ static void __init mpc85xx_rdb_setup_arch(void)
 
 #endif
 
-#ifdef CONFIG_SMP
 	mpc85xx_smp_init();
-#endif
-
 	printk(KERN_INFO "MPC85xx RDB board from Freescale Semiconductor\n");
 }
 
-static struct of_device_id __initdata mpc85xxrdb_ids[] = {
-	{ .type = "soc", },
-	{ .compatible = "soc", },
-	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
-	{},
-};
-
-static int __init mpc85xxrdb_publish_devices(void)
-{
-	return of_platform_bus_probe(NULL, mpc85xxrdb_ids, NULL);
-}
-machine_device_initcall(p2020_rdb, mpc85xxrdb_publish_devices);
-machine_device_initcall(p1020_rdb, mpc85xxrdb_publish_devices);
+machine_device_initcall(p2020_rdb, mpc85xx_common_publish_devices);
+machine_device_initcall(p1020_rdb, mpc85xx_common_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened
diff --git a/arch/powerpc/platforms/85xx/p1010rdb.c b/arch/powerpc/platforms/85xx/p1010rdb.c
index d7387fa..538bc3f 100644
--- a/arch/powerpc/platforms/85xx/p1010rdb.c
+++ b/arch/powerpc/platforms/85xx/p1010rdb.c
@@ -28,33 +28,18 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 
+#include "mpc85xx.h"
+
 void __init p1010_rdb_pic_init(void)
 {
-	struct mpic *mpic;
-	struct resource r;
-	struct device_node *np;
-
-	np = of_find_node_by_type(NULL, "open-pic");
-	if (np == NULL) {
-		printk(KERN_ERR "Could not find open-pic node\n");
-		return;
-	}
-
-	if (of_address_to_resource(np, 0, &r)) {
-		printk(KERN_ERR "Failed to map mpic register space\n");
-		of_node_put(np);
-		return;
-	}
-
-	mpic = mpic_alloc(np, r.start, MPIC_PRIMARY | MPIC_WANTS_RESET |
-	  MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU,
+	struct mpic *mpic = mpic_alloc(NULL, 0,
+	  MPIC_WANTS_RESET | MPIC_BIG_ENDIAN |
+	  MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU,
 	  0, 256, " OpenPIC  ");
 
 	BUG_ON(mpic == NULL);
-	of_node_put(np);
 
 	mpic_init(mpic);
-
 }
 
 
@@ -81,18 +66,7 @@ static void __init p1010_rdb_setup_arch(void)
 	printk(KERN_INFO "P1010 RDB board from Freescale Semiconductor\n");
 }
 
-static struct of_device_id __initdata p1010rdb_ids[] = {
-	{ .type = "soc", },
-	{ .compatible = "soc", },
-	{ .compatible = "simple-bus", },
-	{},
-};
-
-static int __init p1010rdb_publish_devices(void)
-{
-	return of_platform_bus_probe(NULL, p1010rdb_ids, NULL);
-}
-machine_device_initcall(p1010_rdb, p1010rdb_publish_devices);
+machine_device_initcall(p1010_rdb, mpc85xx_common_publish_devices);
 machine_arch_initcall(p1010_rdb, swiotlb_setup_bus_notifier);
 
 /*
diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c
index fda1571..bb3d84f 100644
--- a/arch/powerpc/platforms/85xx/p1022_ds.c
+++ b/arch/powerpc/platforms/85xx/p1022_ds.c
@@ -26,6 +26,9 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 #include <asm/fsl_guts.h>
+#include "smp.h"
+
+#include "mpc85xx.h"
 
 #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
 
@@ -238,38 +241,15 @@ p1022ds_valid_monitor_port(enum fsl_diu_monitor_port port)
 
 void __init p1022_ds_pic_init(void)
 {
-	struct mpic *mpic;
-	struct resource r;
-	struct device_node *np;
-
-	np = of_find_node_by_type(NULL, "open-pic");
-	if (!np) {
-		pr_err("Could not find open-pic node\n");
-		return;
-	}
-
-	if (of_address_to_resource(np, 0, &r)) {
-		pr_err("Failed to map mpic register space\n");
-		of_node_put(np);
-		return;
-	}
-
-	mpic = mpic_alloc(np, r.start,
-		MPIC_PRIMARY | MPIC_WANTS_RESET |
+	struct mpic *mpic = mpic_alloc(NULL, 0,
+		MPIC_WANTS_RESET |
 		MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS |
 		MPIC_SINGLE_DEST_CPU,
 		0, 256, " OpenPIC  ");
-
 	BUG_ON(mpic == NULL);
-	of_node_put(np);
-
 	mpic_init(mpic);
 }
 
-#ifdef CONFIG_SMP
-void __init mpc85xx_smp_init(void);
-#endif
-
 /*
  * Setup the architecture
  */
@@ -309,9 +289,7 @@ static void __init p1022_ds_setup_arch(void)
 	diu_ops.valid_monitor_port	= p1022ds_valid_monitor_port;
 #endif
 
-#ifdef CONFIG_SMP
 	mpc85xx_smp_init();
-#endif
 
 #ifdef CONFIG_SWIOTLB
 	if (memblock_end_of_DRAM() > max) {
@@ -325,10 +303,6 @@ static void __init p1022_ds_setup_arch(void)
 }
 
 static struct of_device_id __initdata p1022_ds_ids[] = {
-	{ .type = "soc", },
-	{ .compatible = "soc", },
-	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
 	/* So that the DMA channel nodes can be probed individually: */
 	{ .compatible = "fsl,eloplus-dma", },
 	{},
@@ -336,6 +310,7 @@ static struct of_device_id __initdata p1022_ds_ids[] = {
 
 static int __init p1022_ds_publish_devices(void)
 {
+	mpc85xx_common_publish_devices();
 	return of_platform_bus_probe(NULL, p1022_ds_ids, NULL);
 }
 machine_device_initcall(p1022_ds, p1022_ds_publish_devices);
diff --git a/arch/powerpc/platforms/85xx/p1023_rds.c b/arch/powerpc/platforms/85xx/p1023_rds.c
index 835e0b3..d951e70 100644
--- a/arch/powerpc/platforms/85xx/p1023_rds.c
+++ b/arch/powerpc/platforms/85xx/p1023_rds.c
@@ -30,19 +30,18 @@
 #include <asm/prom.h>
 #include <asm/udbg.h>
 #include <asm/mpic.h>
+#include "smp.h"
 
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 
+#include "mpc85xx.h"
+
 /* ************************************************************************
  *
  * Setup the architecture
  *
  */
-#ifdef CONFIG_SMP
-void __init mpc85xx_smp_init(void);
-#endif
-
 static void __init mpc85xx_rds_setup_arch(void)
 {
 	struct device_node *np;
@@ -87,53 +86,19 @@ static void __init mpc85xx_rds_setup_arch(void)
 		fsl_add_bridge(np, 0);
 #endif
 
-#ifdef CONFIG_SMP
 	mpc85xx_smp_init();
-#endif
-}
-
-static struct of_device_id p1023_ids[] = {
-	{ .type = "soc", },
-	{ .compatible = "soc", },
-	{ .compatible = "simple-bus", },
-	{},
-};
-
-
-static int __init p1023_publish_devices(void)
-{
-	of_platform_bus_probe(NULL, p1023_ids, NULL);
-
-	return 0;
 }
 
-machine_device_initcall(p1023_rds, p1023_publish_devices);
+machine_device_initcall(p1023_rds, mpc85xx_common_publish_devices);
 
 static void __init mpc85xx_rds_pic_init(void)
 {
-	struct mpic *mpic;
-	struct resource r;
-	struct device_node *np = NULL;
-
-	np = of_find_node_by_type(NULL, "open-pic");
-	if (!np) {
-		printk(KERN_ERR "Could not find open-pic node\n");
-		return;
-	}
-
-	if (of_address_to_resource(np, 0, &r)) {
-		printk(KERN_ERR "Failed to map mpic register space\n");
-		of_node_put(np);
-		return;
-	}
-
-	mpic = mpic_alloc(np, r.start,
-		MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN |
+	struct mpic *mpic = mpic_alloc(NULL, 0,
+		MPIC_WANTS_RESET | MPIC_BIG_ENDIAN |
 		MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU,
 		0, 256, " OpenPIC  ");
 
 	BUG_ON(mpic == NULL);
-	of_node_put(np);
 
 	mpic_init(mpic);
 }
diff --git a/arch/powerpc/platforms/85xx/sbc8548.c b/arch/powerpc/platforms/85xx/sbc8548.c
index 14632a9..184a507 100644
--- a/arch/powerpc/platforms/85xx/sbc8548.c
+++ b/arch/powerpc/platforms/85xx/sbc8548.c
@@ -48,35 +48,16 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 
+#include "mpc85xx.h"
+
 static int sbc_rev;
 
 static void __init sbc8548_pic_init(void)
 {
-	struct mpic *mpic;
-	struct resource r;
-	struct device_node *np = NULL;
-
-	np = of_find_node_by_type(np, "open-pic");
-
-	if (np == NULL) {
-		printk(KERN_ERR "Could not find open-pic node\n");
-		return;
-	}
-
-	if (of_address_to_resource(np, 0, &r)) {
-		printk(KERN_ERR "Failed to map mpic register space\n");
-		of_node_put(np);
-		return;
-	}
-
-	mpic = mpic_alloc(np, r.start,
-			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+	struct mpic *mpic = mpic_alloc(NULL, 0,
+			MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
 			0, 256, " OpenPIC  ");
 	BUG_ON(mpic == NULL);
-
-	/* Return the mpic node */
-	of_node_put(np);
-
 	mpic_init(mpic);
 }
 
@@ -149,21 +130,7 @@ static void sbc8548_show_cpuinfo(struct seq_file *m)
 	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
 }
 
-static struct of_device_id __initdata of_bus_ids[] = {
-	{ .name = "soc", },
-	{ .type = "soc", },
-	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
-	{},
-};
-
-static int __init declare_of_platform_devices(void)
-{
-	of_platform_bus_probe(NULL, of_bus_ids, NULL);
-
-	return 0;
-}
-machine_device_initcall(sbc8548, declare_of_platform_devices);
+machine_device_initcall(sbc8548, mpc85xx_common_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened
diff --git a/arch/powerpc/platforms/85xx/sbc8560.c b/arch/powerpc/platforms/85xx/sbc8560.c
index cebd786..940752e 100644
--- a/arch/powerpc/platforms/85xx/sbc8560.c
+++ b/arch/powerpc/platforms/85xx/sbc8560.c
@@ -32,68 +32,22 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 
+#include "mpc85xx.h"
+
 #ifdef CONFIG_CPM2
 #include <asm/cpm2.h>
 #include <sysdev/cpm2_pic.h>
 #endif
 
-#ifdef CONFIG_CPM2
-
-static void cpm2_cascade(unsigned int irq, struct irq_desc *desc)
-{
-	struct irq_chip *chip = irq_desc_get_chip(desc);
-	int cascade_irq;
-
-	while ((cascade_irq = cpm2_get_irq()) >= 0)
-		generic_handle_irq(cascade_irq);
-
-	chip->irq_eoi(&desc->irq_data);
-}
-
-#endif /* CONFIG_CPM2 */
-
 static void __init sbc8560_pic_init(void)
 {
-	struct mpic *mpic;
-	struct resource r;
-	struct device_node *np = NULL;
-#ifdef CONFIG_CPM2
-	int irq;
-#endif
-
-	np = of_find_node_by_type(np, "open-pic");
-	if (!np) {
-		printk(KERN_ERR "Could not find open-pic node\n");
-		return;
-	}
-
-	if (of_address_to_resource(np, 0, &r)) {
-		printk(KERN_ERR "Could not map mpic register space\n");
-		of_node_put(np);
-		return;
-	}
-
-	mpic = mpic_alloc(np, r.start,
-			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+	struct mpic *mpic = mpic_alloc(NULL, 0,
+			MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
 			0, 256, " OpenPIC  ");
 	BUG_ON(mpic == NULL);
-	of_node_put(np);
-
 	mpic_init(mpic);
 
-#ifdef CONFIG_CPM2
-	/* Setup CPM2 PIC */
-	np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic");
-	if (np == NULL) {
-		printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n");
-		return;
-	}
-	irq = irq_of_parse_and_map(np, 0);
-
-	cpm2_pic_init(np);
-	of_node_put(np);
-	irq_set_chained_handler(irq, cpm2_cascade);
-#endif
+	mpc85xx_cpm2_pic_init();
 }
 
 /*
@@ -208,23 +162,7 @@ static void sbc8560_show_cpuinfo(struct seq_file *m)
 	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
 }
 
-static struct of_device_id __initdata of_bus_ids[] = {
-	{ .name = "soc", },
-	{ .type = "soc", },
-	{ .name = "cpm", },
-	{ .name = "localbus", },
-	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
-	{},
-};
-
-static int __init declare_of_platform_devices(void)
-{
-	of_platform_bus_probe(NULL, of_bus_ids, NULL);
-
-	return 0;
-}
-machine_device_initcall(sbc8560, declare_of_platform_devices);
+machine_device_initcall(sbc8560, mpc85xx_common_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index 2df4785..ff42490 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -27,6 +27,7 @@
 
 #include <sysdev/fsl_soc.h>
 #include <sysdev/mpic.h>
+#include "smp.h"
 
 extern void __early_start(void);
 
diff --git a/arch/powerpc/platforms/85xx/smp.h b/arch/powerpc/platforms/85xx/smp.h
new file mode 100644
index 0000000..e2b4493
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/smp.h
@@ -0,0 +1,15 @@
+#ifndef POWERPC_85XX_SMP_H_
+#define POWERPC_85XX_SMP_H_ 1
+
+#include <linux/init.h>
+
+#ifdef CONFIG_SMP
+void __init mpc85xx_smp_init(void);
+#else
+static inline void mpc85xx_smp_init(void)
+{
+	/* Nothing to do */
+}
+#endif
+
+#endif /* not POWERPC_85XX_SMP_H_ */
diff --git a/arch/powerpc/platforms/85xx/socrates.c b/arch/powerpc/platforms/85xx/socrates.c
index 747d8fb..18f6359 100644
--- a/arch/powerpc/platforms/85xx/socrates.c
+++ b/arch/powerpc/platforms/85xx/socrates.c
@@ -41,32 +41,17 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 
+#include "mpc85xx.h"
 #include "socrates_fpga_pic.h"
 
 static void __init socrates_pic_init(void)
 {
-	struct mpic *mpic;
-	struct resource r;
 	struct device_node *np;
 
-	np = of_find_node_by_type(NULL, "open-pic");
-	if (!np) {
-		printk(KERN_ERR "Could not find open-pic node\n");
-		return;
-	}
-
-	if (of_address_to_resource(np, 0, &r)) {
-		printk(KERN_ERR "Could not map mpic register space\n");
-		of_node_put(np);
-		return;
-	}
-
-	mpic = mpic_alloc(np, r.start,
-			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+	struct mpic *mpic = mpic_alloc(NULL, 0,
+			MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
 			0, 256, " OpenPIC  ");
 	BUG_ON(mpic == NULL);
-	of_node_put(np);
-
 	mpic_init(mpic);
 
 	np = of_find_compatible_node(NULL, NULL, "abb,socrates-fpga-pic");
@@ -96,17 +81,7 @@ static void __init socrates_setup_arch(void)
 #endif
 }
 
-static struct of_device_id __initdata socrates_of_bus_ids[] = {
-	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
-	{},
-};
-
-static int __init socrates_publish_devices(void)
-{
-	return of_platform_bus_probe(NULL, socrates_of_bus_ids, NULL);
-}
-machine_device_initcall(socrates, socrates_publish_devices);
+machine_device_initcall(socrates, mpc85xx_common_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened
diff --git a/arch/powerpc/platforms/85xx/stx_gp3.c b/arch/powerpc/platforms/85xx/stx_gp3.c
index 5387e9f..e9e5234 100644
--- a/arch/powerpc/platforms/85xx/stx_gp3.c
+++ b/arch/powerpc/platforms/85xx/stx_gp3.c
@@ -40,70 +40,21 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 
+#include "mpc85xx.h"
+
 #ifdef CONFIG_CPM2
 #include <asm/cpm2.h>
-#include <sysdev/cpm2_pic.h>
-
-static void cpm2_cascade(unsigned int irq, struct irq_desc *desc)
-{
-	struct irq_chip *chip = irq_desc_get_chip(desc);
-	int cascade_irq;
-
-	while ((cascade_irq = cpm2_get_irq()) >= 0)
-		generic_handle_irq(cascade_irq);
-
-	chip->irq_eoi(&desc->irq_data);
-}
 #endif /* CONFIG_CPM2 */
 
 static void __init stx_gp3_pic_init(void)
 {
-	struct mpic *mpic;
-	struct resource r;
-	struct device_node *np;
-#ifdef CONFIG_CPM2
-	int irq;
-#endif
-
-	np = of_find_node_by_type(NULL, "open-pic");
-	if (!np) {
-		printk(KERN_ERR "Could not find open-pic node\n");
-		return;
-	}
-
-	if (of_address_to_resource(np, 0, &r)) {
-		printk(KERN_ERR "Could not map mpic register space\n");
-		of_node_put(np);
-		return;
-	}
-
-	mpic = mpic_alloc(np, r.start,
-			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+	struct mpic *mpic = mpic_alloc(NULL, 0,
+			MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
 			0, 256, " OpenPIC  ");
 	BUG_ON(mpic == NULL);
-	of_node_put(np);
-
 	mpic_init(mpic);
 
-#ifdef CONFIG_CPM2
-	/* Setup CPM2 PIC */
-	np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic");
-	if (np == NULL) {
-		printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n");
-		return;
-	}
-	irq = irq_of_parse_and_map(np, 0);
-
-	if (irq == NO_IRQ) {
-		of_node_put(np);
-		printk(KERN_ERR "PIC init: got no IRQ for cpm cascade\n");
-		return;
-	}
-
-	cpm2_pic_init(np);
-	of_node_put(np);
-	irq_set_chained_handler(irq, cpm2_cascade);
-#endif
+	mpc85xx_cpm2_pic_init();
 }
 
 /*
@@ -144,19 +95,7 @@ static void stx_gp3_show_cpuinfo(struct seq_file *m)
 	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
 }
 
-static struct of_device_id __initdata of_bus_ids[] = {
-	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
-	{},
-};
-
-static int __init declare_of_platform_devices(void)
-{
-	of_platform_bus_probe(NULL, of_bus_ids, NULL);
-
-	return 0;
-}
-machine_device_initcall(stx_gp3, declare_of_platform_devices);
+machine_device_initcall(stx_gp3, mpc85xx_common_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened
diff --git a/arch/powerpc/platforms/85xx/tqm85xx.c b/arch/powerpc/platforms/85xx/tqm85xx.c
index 325de77..bf7c89f 100644
--- a/arch/powerpc/platforms/85xx/tqm85xx.c
+++ b/arch/powerpc/platforms/85xx/tqm85xx.c
@@ -38,70 +38,21 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 
+#include "mpc85xx.h"
+
 #ifdef CONFIG_CPM2
 #include <asm/cpm2.h>
-#include <sysdev/cpm2_pic.h>
-
-static void cpm2_cascade(unsigned int irq, struct irq_desc *desc)
-{
-	struct irq_chip *chip = irq_desc_get_chip(desc);
-	int cascade_irq;
-
-	while ((cascade_irq = cpm2_get_irq()) >= 0)
-		generic_handle_irq(cascade_irq);
-
-	chip->irq_eoi(&desc->irq_data);
-}
 #endif /* CONFIG_CPM2 */
 
 static void __init tqm85xx_pic_init(void)
 {
-	struct mpic *mpic;
-	struct resource r;
-	struct device_node *np;
-#ifdef CONFIG_CPM2
-	int irq;
-#endif
-
-	np = of_find_node_by_type(NULL, "open-pic");
-	if (!np) {
-		printk(KERN_ERR "Could not find open-pic node\n");
-		return;
-	}
-
-	if (of_address_to_resource(np, 0, &r)) {
-		printk(KERN_ERR "Could not map mpic register space\n");
-		of_node_put(np);
-		return;
-	}
-
-	mpic = mpic_alloc(np, r.start,
-			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+	struct mpic *mpic = mpic_alloc(NULL, 0,
+			MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
 			0, 256, " OpenPIC  ");
 	BUG_ON(mpic == NULL);
-	of_node_put(np);
-
 	mpic_init(mpic);
 
-#ifdef CONFIG_CPM2
-	/* Setup CPM2 PIC */
-	np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic");
-	if (np == NULL) {
-		printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n");
-		return;
-	}
-	irq = irq_of_parse_and_map(np, 0);
-
-	if (irq == NO_IRQ) {
-		of_node_put(np);
-		printk(KERN_ERR "PIC init: got no IRQ for cpm cascade\n");
-		return;
-	}
-
-	cpm2_pic_init(np);
-	of_node_put(np);
-	irq_set_chained_handler(irq, cpm2_cascade);
-#endif
+	mpc85xx_cpm2_pic_init();
 }
 
 /*
@@ -173,19 +124,7 @@ static void __init tqm85xx_ti1520_fixup(struct pci_dev *pdev)
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1520,
 		tqm85xx_ti1520_fixup);
 
-static struct of_device_id __initdata of_bus_ids[] = {
-	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
-	{},
-};
-
-static int __init declare_of_platform_devices(void)
-{
-	of_platform_bus_probe(NULL, of_bus_ids, NULL);
-
-	return 0;
-}
-machine_device_initcall(tqm85xx, declare_of_platform_devices);
+machine_device_initcall(tqm85xx, mpc85xx_common_publish_devices);
 
 static const char *board[] __initdata = {
 	"tqc,tqm8540",
diff --git a/arch/powerpc/platforms/85xx/xes_mpc85xx.c b/arch/powerpc/platforms/85xx/xes_mpc85xx.c
index a9dc5e7..3a69f8b 100644
--- a/arch/powerpc/platforms/85xx/xes_mpc85xx.c
+++ b/arch/powerpc/platforms/85xx/xes_mpc85xx.c
@@ -32,6 +32,9 @@
 
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
+#include "smp.h"
+
+#include "mpc85xx.h"
 
 /* A few bit definitions needed for fixups on some boards */
 #define MPC85xx_L2CTL_L2E		0x80000000 /* L2 enable */
@@ -40,29 +43,11 @@
 
 void __init xes_mpc85xx_pic_init(void)
 {
-	struct mpic *mpic;
-	struct resource r;
-	struct device_node *np;
-
-	np = of_find_node_by_type(NULL, "open-pic");
-	if (np == NULL) {
-		printk(KERN_ERR "Could not find open-pic node\n");
-		return;
-	}
-
-	if (of_address_to_resource(np, 0, &r)) {
-		printk(KERN_ERR "Failed to map mpic register space\n");
-		of_node_put(np);
-		return;
-	}
-
-	mpic = mpic_alloc(np, r.start,
-			  MPIC_PRIMARY | MPIC_WANTS_RESET |
+	struct mpic *mpic = mpic_alloc(NULL, 0,
+			  MPIC_WANTS_RESET |
 			  MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS,
 			0, 256, " OpenPIC  ");
 	BUG_ON(mpic == NULL);
-	of_node_put(np);
-
 	mpic_init(mpic);
 }
 
@@ -136,9 +121,6 @@ static int primary_phb_addr;
 /*
  * Setup the architecture
  */
-#ifdef CONFIG_SMP
-extern void __init mpc85xx_smp_init(void);
-#endif
 static void __init xes_mpc85xx_setup_arch(void)
 {
 #ifdef CONFIG_PCI
@@ -172,26 +154,12 @@ static void __init xes_mpc85xx_setup_arch(void)
 	}
 #endif
 
-#ifdef CONFIG_SMP
 	mpc85xx_smp_init();
-#endif
 }
 
-static struct of_device_id __initdata xes_mpc85xx_ids[] = {
-	{ .type = "soc", },
-	{ .compatible = "soc", },
-	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
-	{},
-};
-
-static int __init xes_mpc85xx_publish_devices(void)
-{
-	return of_platform_bus_probe(NULL, xes_mpc85xx_ids, NULL);
-}
-machine_device_initcall(xes_mpc8572, xes_mpc85xx_publish_devices);
-machine_device_initcall(xes_mpc8548, xes_mpc85xx_publish_devices);
-machine_device_initcall(xes_mpc8540, xes_mpc85xx_publish_devices);
+machine_device_initcall(xes_mpc8572, mpc85xx_common_publish_devices);
+machine_device_initcall(xes_mpc8548, mpc85xx_common_publish_devices);
+machine_device_initcall(xes_mpc8540, mpc85xx_common_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index b11c353..569262c 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -161,7 +161,7 @@ mpc86xx_time_init(void)
 
 static __initdata struct of_device_id of_bus_ids[] = {
 	{ .compatible = "simple-bus", },
-	{ .compatible = "fsl,rapidio-delta", },
+	{ .compatible = "fsl,srio", },
 	{ .compatible = "gianfar", },
 	{},
 };
diff --git a/arch/powerpc/platforms/86xx/pic.c b/arch/powerpc/platforms/86xx/pic.c
index 8ef8960..52bbfa0 100644
--- a/arch/powerpc/platforms/86xx/pic.c
+++ b/arch/powerpc/platforms/86xx/pic.c
@@ -31,26 +31,16 @@ static void mpc86xx_8259_cascade(unsigned int irq, struct irq_desc *desc)
 
 void __init mpc86xx_init_irq(void)
 {
-	struct mpic *mpic;
-	struct device_node *np;
-	struct resource res;
 #ifdef CONFIG_PPC_I8259
+	struct device_node *np;
 	struct device_node *cascade_node = NULL;
 	int cascade_irq;
 #endif
 
-	/* Determine PIC address. */
-	np = of_find_node_by_type(NULL, "open-pic");
-	if (np == NULL)
-		return;
-	of_address_to_resource(np, 0, &res);
-
-	mpic = mpic_alloc(np, res.start,
-			MPIC_PRIMARY | MPIC_WANTS_RESET |
-			MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS |
-			MPIC_SINGLE_DEST_CPU,
+	struct mpic *mpic = mpic_alloc(NULL, 0,
+			MPIC_WANTS_RESET | MPIC_BIG_ENDIAN |
+			MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU,
 			0, 256, " MPIC     ");
-	of_node_put(np);
 	BUG_ON(mpic == NULL);
 
 	mpic_init(mpic);
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 3fe6d92..31e1ade 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -211,6 +211,12 @@ config PPC_PASEMI_CPUFREQ
 
 endmenu
 
+menu "CPUIdle driver"
+
+source "drivers/cpuidle/Kconfig"
+
+endmenu
+
 config PPC601_SYNC_FIX
 	bool "Workarounds for PPC601 bugs"
 	depends on 6xx && (PPC_PREP || PPC_PMAC)
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index fbecae0..425db18 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -174,7 +174,6 @@ config BOOKE
 config FSL_BOOKE
 	bool
 	depends on (E200 || E500) && PPC32
-	select SYS_SUPPORTS_HUGETLBFS if PHYS_64BIT
 	default y
 
 # this is for common code between PPC32 & PPC64 FSL BOOKE
@@ -182,6 +181,7 @@ config PPC_FSL_BOOK3E
 	bool
 	select FSL_EMB_PERFMON
 	select PPC_SMP_MUXED_IPI
+	select SYS_SUPPORTS_HUGETLBFS if PHYS_64BIT || PPC64
 	default y if FSL_BOOKE
 
 config PTE_64BIT
@@ -236,7 +236,7 @@ config VSX
 
 config PPC_ICSWX
 	bool "Support for PowerPC icswx coprocessor instruction"
-	depends on POWER4
+	depends on POWER4 || PPC_A2
 	default n
 	---help---
 
@@ -252,6 +252,25 @@ config PPC_ICSWX
 
 	  If in doubt, say N here.
 
+config PPC_ICSWX_PID
+	bool "icswx requires direct PID management"
+	depends on PPC_ICSWX && POWER4
+	default y
+	---help---
+	  The PID register in server is used explicitly for ICSWX.  In
+	  embedded systems PID managment is done by the system.
+
+config PPC_ICSWX_USE_SIGILL
+	bool "Should a bad CT cause a SIGILL?"
+	depends on PPC_ICSWX
+	default n
+	---help---
+	  Should a bad CT used for "non-record form ICSWX" cause an
+	  illegal intruction signal or should it be silent as
+	  architected.
+
+	  If in doubt, say N here.
+
 config SPE
 	bool "SPE Support"
 	depends on E200 || (E500 && !PPC_E500MC)
@@ -290,7 +309,7 @@ config PPC_BOOK3E_MMU
 
 config PPC_MM_SLICES
 	bool
-	default y if (PPC64 && HUGETLB_PAGE) || (PPC_STD_MMU_64 && PPC_64K_PAGES)
+	default y if (!PPC_FSL_BOOK3E && PPC64 && HUGETLB_PAGE) || (PPC_STD_MMU_64 && PPC_64K_PAGES)
 	default n
 
 config VIRT_CPU_ACCOUNTING
diff --git a/arch/powerpc/platforms/cell/cbe_thermal.c b/arch/powerpc/platforms/cell/cbe_thermal.c
index 4d4c8c1..94560db 100644
--- a/arch/powerpc/platforms/cell/cbe_thermal.c
+++ b/arch/powerpc/platforms/cell/cbe_thermal.c
@@ -46,7 +46,7 @@
  */
 
 #include <linux/module.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/kernel.h>
 #include <linux/cpu.h>
 #include <asm/spu.h>
@@ -59,8 +59,8 @@
 #define TEMP_MIN 65
 #define TEMP_MAX 125
 
-#define SYSDEV_PREFIX_ATTR(_prefix,_name,_mode)			\
-struct sysdev_attribute attr_ ## _prefix ## _ ## _name = {	\
+#define DEVICE_PREFIX_ATTR(_prefix,_name,_mode)			\
+struct device_attribute attr_ ## _prefix ## _ ## _name = {	\
 	.attr = { .name = __stringify(_name), .mode = _mode },	\
 	.show	= _prefix ## _show_ ## _name,			\
 	.store	= _prefix ## _store_ ## _name,			\
@@ -76,36 +76,36 @@ static inline u8 temp_to_reg(u8 temp)
 	return ((temp - TEMP_MIN) >> 1) & 0x3f;
 }
 
-static struct cbe_pmd_regs __iomem *get_pmd_regs(struct sys_device *sysdev)
+static struct cbe_pmd_regs __iomem *get_pmd_regs(struct device *dev)
 {
 	struct spu *spu;
 
-	spu = container_of(sysdev, struct spu, sysdev);
+	spu = container_of(dev, struct spu, dev);
 
 	return cbe_get_pmd_regs(spu_devnode(spu));
 }
 
 /* returns the value for a given spu in a given register */
-static u8 spu_read_register_value(struct sys_device *sysdev, union spe_reg __iomem *reg)
+static u8 spu_read_register_value(struct device *dev, union spe_reg __iomem *reg)
 {
 	union spe_reg value;
 	struct spu *spu;
 
-	spu = container_of(sysdev, struct spu, sysdev);
+	spu = container_of(dev, struct spu, dev);
 	value.val = in_be64(&reg->val);
 
 	return value.spe[spu->spe_id];
 }
 
-static ssize_t spu_show_temp(struct sys_device *sysdev, struct sysdev_attribute *attr,
+static ssize_t spu_show_temp(struct device *dev, struct device_attribute *attr,
 			char *buf)
 {
 	u8 value;
 	struct cbe_pmd_regs __iomem *pmd_regs;
 
-	pmd_regs = get_pmd_regs(sysdev);
+	pmd_regs = get_pmd_regs(dev);
 
-	value = spu_read_register_value(sysdev, &pmd_regs->ts_ctsr1);
+	value = spu_read_register_value(dev, &pmd_regs->ts_ctsr1);
 
 	return sprintf(buf, "%d\n", reg_to_temp(value));
 }
@@ -147,48 +147,48 @@ static ssize_t store_throttle(struct cbe_pmd_regs __iomem *pmd_regs, const char
 	return size;
 }
 
-static ssize_t spu_show_throttle_end(struct sys_device *sysdev,
-			struct sysdev_attribute *attr, char *buf)
+static ssize_t spu_show_throttle_end(struct device *dev,
+			struct device_attribute *attr, char *buf)
 {
-	return show_throttle(get_pmd_regs(sysdev), buf, 0);
+	return show_throttle(get_pmd_regs(dev), buf, 0);
 }
 
-static ssize_t spu_show_throttle_begin(struct sys_device *sysdev,
-			struct sysdev_attribute *attr, char *buf)
+static ssize_t spu_show_throttle_begin(struct device *dev,
+			struct device_attribute *attr, char *buf)
 {
-	return show_throttle(get_pmd_regs(sysdev), buf, 8);
+	return show_throttle(get_pmd_regs(dev), buf, 8);
 }
 
-static ssize_t spu_show_throttle_full_stop(struct sys_device *sysdev,
-			struct sysdev_attribute *attr, char *buf)
+static ssize_t spu_show_throttle_full_stop(struct device *dev,
+			struct device_attribute *attr, char *buf)
 {
-	return show_throttle(get_pmd_regs(sysdev), buf, 16);
+	return show_throttle(get_pmd_regs(dev), buf, 16);
 }
 
-static ssize_t spu_store_throttle_end(struct sys_device *sysdev,
-			struct sysdev_attribute *attr, const char *buf, size_t size)
+static ssize_t spu_store_throttle_end(struct device *dev,
+			struct device_attribute *attr, const char *buf, size_t size)
 {
-	return store_throttle(get_pmd_regs(sysdev), buf, size, 0);
+	return store_throttle(get_pmd_regs(dev), buf, size, 0);
 }
 
-static ssize_t spu_store_throttle_begin(struct sys_device *sysdev,
-			struct sysdev_attribute *attr, const char *buf, size_t size)
+static ssize_t spu_store_throttle_begin(struct device *dev,
+			struct device_attribute *attr, const char *buf, size_t size)
 {
-	return store_throttle(get_pmd_regs(sysdev), buf, size, 8);
+	return store_throttle(get_pmd_regs(dev), buf, size, 8);
 }
 
-static ssize_t spu_store_throttle_full_stop(struct sys_device *sysdev,
-			struct sysdev_attribute *attr, const char *buf, size_t size)
+static ssize_t spu_store_throttle_full_stop(struct device *dev,
+			struct device_attribute *attr, const char *buf, size_t size)
 {
-	return store_throttle(get_pmd_regs(sysdev), buf, size, 16);
+	return store_throttle(get_pmd_regs(dev), buf, size, 16);
 }
 
-static ssize_t ppe_show_temp(struct sys_device *sysdev, char *buf, int pos)
+static ssize_t ppe_show_temp(struct device *dev, char *buf, int pos)
 {
 	struct cbe_pmd_regs __iomem *pmd_regs;
 	u64 value;
 
-	pmd_regs = cbe_get_cpu_pmd_regs(sysdev->id);
+	pmd_regs = cbe_get_cpu_pmd_regs(dev->id);
 	value = in_be64(&pmd_regs->ts_ctsr2);
 
 	value = (value >> pos) & 0x3f;
@@ -199,64 +199,64 @@ static ssize_t ppe_show_temp(struct sys_device *sysdev, char *buf, int pos)
 
 /* shows the temperature of the DTS on the PPE,
  * located near the linear thermal sensor */
-static ssize_t ppe_show_temp0(struct sys_device *sysdev,
-			struct sysdev_attribute *attr, char *buf)
+static ssize_t ppe_show_temp0(struct device *dev,
+			struct device_attribute *attr, char *buf)
 {
-	return ppe_show_temp(sysdev, buf, 32);
+	return ppe_show_temp(dev, buf, 32);
 }
 
 /* shows the temperature of the second DTS on the PPE */
-static ssize_t ppe_show_temp1(struct sys_device *sysdev,
-			struct sysdev_attribute *attr, char *buf)
+static ssize_t ppe_show_temp1(struct device *dev,
+			struct device_attribute *attr, char *buf)
 {
-	return ppe_show_temp(sysdev, buf, 0);
+	return ppe_show_temp(dev, buf, 0);
 }
 
-static ssize_t ppe_show_throttle_end(struct sys_device *sysdev,
-			struct sysdev_attribute *attr, char *buf)
+static ssize_t ppe_show_throttle_end(struct device *dev,
+			struct device_attribute *attr, char *buf)
 {
-	return show_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, 32);
+	return show_throttle(cbe_get_cpu_pmd_regs(dev->id), buf, 32);
 }
 
-static ssize_t ppe_show_throttle_begin(struct sys_device *sysdev,
-			struct sysdev_attribute *attr, char *buf)
+static ssize_t ppe_show_throttle_begin(struct device *dev,
+			struct device_attribute *attr, char *buf)
 {
-	return show_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, 40);
+	return show_throttle(cbe_get_cpu_pmd_regs(dev->id), buf, 40);
 }
 
-static ssize_t ppe_show_throttle_full_stop(struct sys_device *sysdev,
-			struct sysdev_attribute *attr, char *buf)
+static ssize_t ppe_show_throttle_full_stop(struct device *dev,
+			struct device_attribute *attr, char *buf)
 {
-	return show_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, 48);
+	return show_throttle(cbe_get_cpu_pmd_regs(dev->id), buf, 48);
 }
 
-static ssize_t ppe_store_throttle_end(struct sys_device *sysdev,
-			struct sysdev_attribute *attr, const char *buf, size_t size)
+static ssize_t ppe_store_throttle_end(struct device *dev,
+			struct device_attribute *attr, const char *buf, size_t size)
 {
-	return store_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, size, 32);
+	return store_throttle(cbe_get_cpu_pmd_regs(dev->id), buf, size, 32);
 }
 
-static ssize_t ppe_store_throttle_begin(struct sys_device *sysdev,
-			struct sysdev_attribute *attr, const char *buf, size_t size)
+static ssize_t ppe_store_throttle_begin(struct device *dev,
+			struct device_attribute *attr, const char *buf, size_t size)
 {
-	return store_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, size, 40);
+	return store_throttle(cbe_get_cpu_pmd_regs(dev->id), buf, size, 40);
 }
 
-static ssize_t ppe_store_throttle_full_stop(struct sys_device *sysdev,
-			struct sysdev_attribute *attr, const char *buf, size_t size)
+static ssize_t ppe_store_throttle_full_stop(struct device *dev,
+			struct device_attribute *attr, const char *buf, size_t size)
 {
-	return store_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, size, 48);
+	return store_throttle(cbe_get_cpu_pmd_regs(dev->id), buf, size, 48);
 }
 
 
-static struct sysdev_attribute attr_spu_temperature = {
+static struct device_attribute attr_spu_temperature = {
 	.attr = {.name = "temperature", .mode = 0400 },
 	.show = spu_show_temp,
 };
 
-static SYSDEV_PREFIX_ATTR(spu, throttle_end, 0600);
-static SYSDEV_PREFIX_ATTR(spu, throttle_begin, 0600);
-static SYSDEV_PREFIX_ATTR(spu, throttle_full_stop, 0600);
+static DEVICE_PREFIX_ATTR(spu, throttle_end, 0600);
+static DEVICE_PREFIX_ATTR(spu, throttle_begin, 0600);
+static DEVICE_PREFIX_ATTR(spu, throttle_full_stop, 0600);
 
 
 static struct attribute *spu_attributes[] = {
@@ -272,19 +272,19 @@ static struct attribute_group spu_attribute_group = {
 	.attrs	= spu_attributes,
 };
 
-static struct sysdev_attribute attr_ppe_temperature0 = {
+static struct device_attribute attr_ppe_temperature0 = {
 	.attr = {.name = "temperature0", .mode = 0400 },
 	.show = ppe_show_temp0,
 };
 
-static struct sysdev_attribute attr_ppe_temperature1 = {
+static struct device_attribute attr_ppe_temperature1 = {
 	.attr = {.name = "temperature1", .mode = 0400 },
 	.show = ppe_show_temp1,
 };
 
-static SYSDEV_PREFIX_ATTR(ppe, throttle_end, 0600);
-static SYSDEV_PREFIX_ATTR(ppe, throttle_begin, 0600);
-static SYSDEV_PREFIX_ATTR(ppe, throttle_full_stop, 0600);
+static DEVICE_PREFIX_ATTR(ppe, throttle_end, 0600);
+static DEVICE_PREFIX_ATTR(ppe, throttle_begin, 0600);
+static DEVICE_PREFIX_ATTR(ppe, throttle_full_stop, 0600);
 
 static struct attribute *ppe_attributes[] = {
 	&attr_ppe_temperature0.attr,
@@ -307,7 +307,7 @@ static int __init init_default_values(void)
 {
 	int cpu;
 	struct cbe_pmd_regs __iomem *pmd_regs;
-	struct sys_device *sysdev;
+	struct device *dev;
 	union ppe_spe_reg tpr;
 	union spe_reg str1;
 	u64 str2;
@@ -349,14 +349,14 @@ static int __init init_default_values(void)
 
 	for_each_possible_cpu (cpu) {
 		pr_debug("processing cpu %d\n", cpu);
-		sysdev = get_cpu_sysdev(cpu);
+		dev = get_cpu_device(cpu);
 
-		if (!sysdev) {
-			pr_info("invalid sysdev pointer for cbe_thermal\n");
+		if (!dev) {
+			pr_info("invalid dev pointer for cbe_thermal\n");
 			return -EINVAL;
 		}
 
-		pmd_regs = cbe_get_cpu_pmd_regs(sysdev->id);
+		pmd_regs = cbe_get_cpu_pmd_regs(dev->id);
 
 		if (!pmd_regs) {
 			pr_info("invalid CBE regs pointer for cbe_thermal\n");
@@ -379,8 +379,8 @@ static int __init thermal_init(void)
 	int rc = init_default_values();
 
 	if (rc == 0) {
-		spu_add_sysdev_attr_group(&spu_attribute_group);
-		cpu_add_sysdev_attr_group(&ppe_attribute_group);
+		spu_add_dev_attr_group(&spu_attribute_group);
+		cpu_add_dev_attr_group(&ppe_attribute_group);
 	}
 
 	return rc;
@@ -389,8 +389,8 @@ module_init(thermal_init);
 
 static void __exit thermal_exit(void)
 {
-	spu_remove_sysdev_attr_group(&spu_attribute_group);
-	cpu_remove_sysdev_attr_group(&ppe_attribute_group);
+	spu_remove_dev_attr_group(&spu_attribute_group);
+	cpu_remove_dev_attr_group(&ppe_attribute_group);
 }
 module_exit(thermal_exit);
 
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index 592c3d5..ae9fc7b 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -1037,6 +1037,8 @@ static int __init cell_iommu_fixed_mapping_init(void)
 
 	/* The fixed mapping is only supported on axon machines */
 	np = of_find_node_by_name(NULL, "axon");
+	of_node_put(np);
+
 	if (!np) {
 		pr_debug("iommu: fixed mapping disabled, no axons found\n");
 		return -1;
diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c
index 0fc9b72..62002a7 100644
--- a/arch/powerpc/platforms/cell/setup.c
+++ b/arch/powerpc/platforms/cell/setup.c
@@ -184,24 +184,10 @@ static int __init cell_publish_devices(void)
 }
 machine_subsys_initcall(cell, cell_publish_devices);
 
-static void cell_mpic_cascade(unsigned int irq, struct irq_desc *desc)
-{
-	struct irq_chip *chip = irq_desc_get_chip(desc);
-	struct mpic *mpic = irq_desc_get_handler_data(desc);
-	unsigned int virq;
-
-	virq = mpic_get_one_irq(mpic);
-	if (virq != NO_IRQ)
-		generic_handle_irq(virq);
-
-	chip->irq_eoi(&desc->irq_data);
-}
-
 static void __init mpic_init_IRQ(void)
 {
 	struct device_node *dn;
 	struct mpic *mpic;
-	unsigned int virq;
 
 	for (dn = NULL;
 	     (dn = of_find_node_by_name(dn, "interrupt-controller"));) {
@@ -211,19 +197,10 @@ static void __init mpic_init_IRQ(void)
 		/* The MPIC driver will get everything it needs from the
 		 * device-tree, just pass 0 to all arguments
 		 */
-		mpic = mpic_alloc(dn, 0, 0, 0, 0, " MPIC     ");
+		mpic = mpic_alloc(dn, 0, MPIC_SECONDARY, 0, 0, " MPIC     ");
 		if (mpic == NULL)
 			continue;
 		mpic_init(mpic);
-
-		virq = irq_of_parse_and_map(dn, 0);
-		if (virq == NO_IRQ)
-			continue;
-
-		printk(KERN_INFO "%s : hooking up to IRQ %d\n",
-		       dn->full_name, virq);
-		irq_set_handler_data(virq, mpic);
-		irq_set_chained_handler(virq, cell_mpic_cascade);
 	}
 }
 
diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c
index f5c5c76..4a255cf 100644
--- a/arch/powerpc/platforms/cell/smp.c
+++ b/arch/powerpc/platforms/cell/smp.c
@@ -23,7 +23,7 @@
 #include <linux/spinlock.h>
 #include <linux/cache.h>
 #include <linux/err.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/cpu.h>
 
 #include <asm/ptrace.h>
diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c
index e94d3ec..8b12139 100644
--- a/arch/powerpc/platforms/cell/spu_base.c
+++ b/arch/powerpc/platforms/cell/spu_base.c
@@ -519,31 +519,32 @@ void spu_init_channels(struct spu *spu)
 }
 EXPORT_SYMBOL_GPL(spu_init_channels);
 
-static struct sysdev_class spu_sysdev_class = {
+static struct bus_type spu_subsys = {
 	.name = "spu",
+	.dev_name = "spu",
 };
 
-int spu_add_sysdev_attr(struct sysdev_attribute *attr)
+int spu_add_dev_attr(struct device_attribute *attr)
 {
 	struct spu *spu;
 
 	mutex_lock(&spu_full_list_mutex);
 	list_for_each_entry(spu, &spu_full_list, full_list)
-		sysdev_create_file(&spu->sysdev, attr);
+		device_create_file(&spu->dev, attr);
 	mutex_unlock(&spu_full_list_mutex);
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(spu_add_sysdev_attr);
+EXPORT_SYMBOL_GPL(spu_add_dev_attr);
 
-int spu_add_sysdev_attr_group(struct attribute_group *attrs)
+int spu_add_dev_attr_group(struct attribute_group *attrs)
 {
 	struct spu *spu;
 	int rc = 0;
 
 	mutex_lock(&spu_full_list_mutex);
 	list_for_each_entry(spu, &spu_full_list, full_list) {
-		rc = sysfs_create_group(&spu->sysdev.kobj, attrs);
+		rc = sysfs_create_group(&spu->dev.kobj, attrs);
 
 		/* we're in trouble here, but try unwinding anyway */
 		if (rc) {
@@ -552,7 +553,7 @@ int spu_add_sysdev_attr_group(struct attribute_group *attrs)
 
 			list_for_each_entry_continue_reverse(spu,
 					&spu_full_list, full_list)
-				sysfs_remove_group(&spu->sysdev.kobj, attrs);
+				sysfs_remove_group(&spu->dev.kobj, attrs);
 			break;
 		}
 	}
@@ -561,45 +562,45 @@ int spu_add_sysdev_attr_group(struct attribute_group *attrs)
 
 	return rc;
 }
-EXPORT_SYMBOL_GPL(spu_add_sysdev_attr_group);
+EXPORT_SYMBOL_GPL(spu_add_dev_attr_group);
 
 
-void spu_remove_sysdev_attr(struct sysdev_attribute *attr)
+void spu_remove_dev_attr(struct device_attribute *attr)
 {
 	struct spu *spu;
 
 	mutex_lock(&spu_full_list_mutex);
 	list_for_each_entry(spu, &spu_full_list, full_list)
-		sysdev_remove_file(&spu->sysdev, attr);
+		device_remove_file(&spu->dev, attr);
 	mutex_unlock(&spu_full_list_mutex);
 }
-EXPORT_SYMBOL_GPL(spu_remove_sysdev_attr);
+EXPORT_SYMBOL_GPL(spu_remove_dev_attr);
 
-void spu_remove_sysdev_attr_group(struct attribute_group *attrs)
+void spu_remove_dev_attr_group(struct attribute_group *attrs)
 {
 	struct spu *spu;
 
 	mutex_lock(&spu_full_list_mutex);
 	list_for_each_entry(spu, &spu_full_list, full_list)
-		sysfs_remove_group(&spu->sysdev.kobj, attrs);
+		sysfs_remove_group(&spu->dev.kobj, attrs);
 	mutex_unlock(&spu_full_list_mutex);
 }
-EXPORT_SYMBOL_GPL(spu_remove_sysdev_attr_group);
+EXPORT_SYMBOL_GPL(spu_remove_dev_attr_group);
 
-static int spu_create_sysdev(struct spu *spu)
+static int spu_create_dev(struct spu *spu)
 {
 	int ret;
 
-	spu->sysdev.id = spu->number;
-	spu->sysdev.cls = &spu_sysdev_class;
-	ret = sysdev_register(&spu->sysdev);
+	spu->dev.id = spu->number;
+	spu->dev.bus = &spu_subsys;
+	ret = device_register(&spu->dev);
 	if (ret) {
 		printk(KERN_ERR "Can't register SPU %d with sysfs\n",
 				spu->number);
 		return ret;
 	}
 
-	sysfs_add_device_to_node(&spu->sysdev, spu->node);
+	sysfs_add_device_to_node(&spu->dev, spu->node);
 
 	return 0;
 }
@@ -635,7 +636,7 @@ static int __init create_spu(void *data)
 	if (ret)
 		goto out_destroy;
 
-	ret = spu_create_sysdev(spu);
+	ret = spu_create_dev(spu);
 	if (ret)
 		goto out_free_irqs;
 
@@ -692,10 +693,10 @@ static unsigned long long spu_acct_time(struct spu *spu,
 }
 
 
-static ssize_t spu_stat_show(struct sys_device *sysdev,
-				struct sysdev_attribute *attr, char *buf)
+static ssize_t spu_stat_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
 {
-	struct spu *spu = container_of(sysdev, struct spu, sysdev);
+	struct spu *spu = container_of(dev, struct spu, dev);
 
 	return sprintf(buf, "%s %llu %llu %llu %llu "
 		      "%llu %llu %llu %llu %llu %llu %llu %llu\n",
@@ -714,7 +715,7 @@ static ssize_t spu_stat_show(struct sys_device *sysdev,
 		spu->stats.libassist);
 }
 
-static SYSDEV_ATTR(stat, 0644, spu_stat_show, NULL);
+static DEVICE_ATTR(stat, 0644, spu_stat_show, NULL);
 
 #ifdef CONFIG_KEXEC
 
@@ -813,8 +814,8 @@ static int __init init_spu_base(void)
 	if (!spu_management_ops)
 		goto out;
 
-	/* create sysdev class for spus */
-	ret = sysdev_class_register(&spu_sysdev_class);
+	/* create system subsystem for spus */
+	ret = subsys_system_register(&spu_subsys, NULL);
 	if (ret)
 		goto out;
 
@@ -823,7 +824,7 @@ static int __init init_spu_base(void)
 	if (ret < 0) {
 		printk(KERN_WARNING "%s: Error initializing spus\n",
 			__func__);
-		goto out_unregister_sysdev_class;
+		goto out_unregister_subsys;
 	}
 
 	if (ret > 0)
@@ -833,15 +834,15 @@ static int __init init_spu_base(void)
 	xmon_register_spus(&spu_full_list);
 	crash_register_spus(&spu_full_list);
 	mutex_unlock(&spu_full_list_mutex);
-	spu_add_sysdev_attr(&attr_stat);
+	spu_add_dev_attr(&dev_attr_stat);
 	register_syscore_ops(&spu_syscore_ops);
 
 	spu_init_affinity();
 
 	return 0;
 
- out_unregister_sysdev_class:
-	sysdev_class_unregister(&spu_sysdev_class);
+ out_unregister_subsys:
+	bus_unregister(&spu_subsys);
  out:
 	return ret;
 }
diff --git a/arch/powerpc/platforms/cell/spu_syscalls.c b/arch/powerpc/platforms/cell/spu_syscalls.c
index 75530d9..714bbfc 100644
--- a/arch/powerpc/platforms/cell/spu_syscalls.c
+++ b/arch/powerpc/platforms/cell/spu_syscalls.c
@@ -65,8 +65,8 @@ static inline void spufs_calls_put(struct spufs_calls *calls) { }
 
 #endif /* CONFIG_SPU_FS_MODULE */
 
-asmlinkage long sys_spu_create(const char __user *name,
-		unsigned int flags, mode_t mode, int neighbor_fd)
+SYSCALL_DEFINE4(spu_create, const char __user *, name, unsigned int, flags,
+	umode_t, mode, int, neighbor_fd)
 {
 	long ret;
 	struct file *neighbor;
diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c
index e481f6b..d4a094c 100644
--- a/arch/powerpc/platforms/cell/spufs/inode.c
+++ b/arch/powerpc/platforms/cell/spufs/inode.c
@@ -74,7 +74,6 @@ spufs_alloc_inode(struct super_block *sb)
 static void spufs_i_callback(struct rcu_head *head)
 {
 	struct inode *inode = container_of(head, struct inode, i_rcu);
-	INIT_LIST_HEAD(&inode->i_dentry);
 	kmem_cache_free(spufs_inode_cache, SPUFS_I(inode));
 }
 
@@ -92,7 +91,7 @@ spufs_init_once(void *p)
 }
 
 static struct inode *
-spufs_new_inode(struct super_block *sb, int mode)
+spufs_new_inode(struct super_block *sb, umode_t mode)
 {
 	struct inode *inode;
 
@@ -124,7 +123,7 @@ spufs_setattr(struct dentry *dentry, struct iattr *attr)
 
 static int
 spufs_new_file(struct super_block *sb, struct dentry *dentry,
-		const struct file_operations *fops, int mode,
+		const struct file_operations *fops, umode_t mode,
 		size_t size, struct spu_context *ctx)
 {
 	static const struct inode_operations spufs_file_iops = {
@@ -194,7 +193,7 @@ static int spufs_rmdir(struct inode *parent, struct dentry *dir)
 }
 
 static int spufs_fill_dir(struct dentry *dir,
-		const struct spufs_tree_descr *files, int mode,
+		const struct spufs_tree_descr *files, umode_t mode,
 		struct spu_context *ctx)
 {
 	struct dentry *dentry, *tmp;
@@ -264,7 +263,7 @@ EXPORT_SYMBOL_GPL(spufs_context_fops);
 
 static int
 spufs_mkdir(struct inode *dir, struct dentry *dentry, unsigned int flags,
-		int mode)
+		umode_t mode)
 {
 	int ret;
 	struct inode *inode;
@@ -447,7 +446,7 @@ spufs_set_affinity(unsigned int flags, struct spu_context *ctx,
 
 static int
 spufs_create_context(struct inode *inode, struct dentry *dentry,
-			struct vfsmount *mnt, int flags, int mode,
+			struct vfsmount *mnt, int flags, umode_t mode,
 			struct file *aff_filp)
 {
 	int ret;
@@ -521,7 +520,7 @@ out:
 }
 
 static int
-spufs_mkgang(struct inode *dir, struct dentry *dentry, int mode)
+spufs_mkgang(struct inode *dir, struct dentry *dentry, umode_t mode)
 {
 	int ret;
 	struct inode *inode;
@@ -584,7 +583,7 @@ out:
 
 static int spufs_create_gang(struct inode *inode,
 			struct dentry *dentry,
-			struct vfsmount *mnt, int mode)
+			struct vfsmount *mnt, umode_t mode)
 {
 	int ret;
 
@@ -612,7 +611,7 @@ out:
 static struct file_system_type spufs_type;
 
 long spufs_create(struct path *path, struct dentry *dentry,
-		unsigned int flags, mode_t mode, struct file *filp)
+		unsigned int flags, umode_t mode, struct file *filp)
 {
 	int ret;
 
diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h
index 099245f..67852ad 100644
--- a/arch/powerpc/platforms/cell/spufs/spufs.h
+++ b/arch/powerpc/platforms/cell/spufs/spufs.h
@@ -237,7 +237,7 @@ struct spufs_inode_info {
 struct spufs_tree_descr {
 	const char *name;
 	const struct file_operations *ops;
-	int mode;
+	umode_t mode;
 	size_t size;
 };
 
@@ -249,7 +249,7 @@ extern const struct spufs_tree_descr spufs_dir_debug_contents[];
 extern struct spufs_calls spufs_calls;
 long spufs_run_spu(struct spu_context *ctx, u32 *npc, u32 *status);
 long spufs_create(struct path *nd, struct dentry *dentry, unsigned int flags,
-			mode_t mode, struct file *filp);
+			umode_t mode, struct file *filp);
 /* ELF coredump callbacks for writing SPU ELF notes */
 extern int spufs_coredump_extra_notes_size(void);
 extern int spufs_coredump_extra_notes_write(struct file *file, loff_t *foffset);
diff --git a/arch/powerpc/platforms/cell/spufs/syscalls.c b/arch/powerpc/platforms/cell/spufs/syscalls.c
index 71a5b52..8591bb6 100644
--- a/arch/powerpc/platforms/cell/spufs/syscalls.c
+++ b/arch/powerpc/platforms/cell/spufs/syscalls.c
@@ -60,7 +60,7 @@ out:
 }
 
 static long do_spu_create(const char __user *pathname, unsigned int flags,
-		mode_t mode, struct file *neighbor)
+		umode_t mode, struct file *neighbor)
 {
 	struct path path;
 	struct dentry *dentry;
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
index 1227864..f1f17bb 100644
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -435,8 +435,7 @@ static void __init chrp_find_openpic(void)
 	if (len > 1)
 		isu_size = iranges[3];
 
-	chrp_mpic = mpic_alloc(np, opaddr, MPIC_PRIMARY,
-			       isu_size, 0, " MPIC    ");
+	chrp_mpic = mpic_alloc(np, opaddr, 0, isu_size, 0, " MPIC    ");
 	if (chrp_mpic == NULL) {
 		printk(KERN_ERR "Failed to allocate MPIC structure\n");
 		goto bail;
diff --git a/arch/powerpc/platforms/embedded6xx/holly.c b/arch/powerpc/platforms/embedded6xx/holly.c
index 2e9bcf6..9cfcf20 100644
--- a/arch/powerpc/platforms/embedded6xx/holly.c
+++ b/arch/powerpc/platforms/embedded6xx/holly.c
@@ -148,30 +148,14 @@ static void __init holly_setup_arch(void)
 static void __init holly_init_IRQ(void)
 {
 	struct mpic *mpic;
-	phys_addr_t mpic_paddr = 0;
-	struct device_node *tsi_pic;
 #ifdef CONFIG_PCI
 	unsigned int cascade_pci_irq;
 	struct device_node *tsi_pci;
 	struct device_node *cascade_node = NULL;
 #endif
 
-	tsi_pic = of_find_node_by_type(NULL, "open-pic");
-	if (tsi_pic) {
-		unsigned int size;
-		const void *prop = of_get_property(tsi_pic, "reg", &size);
-		mpic_paddr = of_translate_address(tsi_pic, prop);
-	}
-
-	if (mpic_paddr == 0) {
-		printk(KERN_ERR "%s: No tsi108 PIC found !\n", __func__);
-		return;
-	}
-
-	pr_debug("%s: tsi108 pic phys_addr = 0x%x\n", __func__, (u32) mpic_paddr);
-
-	mpic = mpic_alloc(tsi_pic, mpic_paddr,
-			MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET |
+	mpic = mpic_alloc(NULL, 0,
+			MPIC_BIG_ENDIAN | MPIC_WANTS_RESET |
 			MPIC_SPV_EOI | MPIC_NO_PTHROU_DIS | MPIC_REGSET_TSI108,
 			24,
 			NR_IRQS-4, /* num_sources used */
@@ -179,7 +163,7 @@ static void __init holly_init_IRQ(void)
 
 	BUG_ON(mpic == NULL);
 
-	mpic_assign_isu(mpic, 0, mpic_paddr + 0x100);
+	mpic_assign_isu(mpic, 0, mpic->paddr + 0x100);
 
 	mpic_init(mpic);
 
@@ -204,7 +188,6 @@ static void __init holly_init_IRQ(void)
 #endif
 	/* Configure MPIC outputs to CPU0 */
 	tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0);
-	of_node_put(tsi_pic);
 }
 
 void holly_show_cpuinfo(struct seq_file *m)
diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c
index 244f997..bcfad92 100644
--- a/arch/powerpc/platforms/embedded6xx/linkstation.c
+++ b/arch/powerpc/platforms/embedded6xx/linkstation.c
@@ -81,29 +81,19 @@ static void __init linkstation_setup_arch(void)
 static void __init linkstation_init_IRQ(void)
 {
 	struct mpic *mpic;
-	struct device_node *dnp;
-	const u32 *prop;
-	int size;
-	phys_addr_t paddr;
 
-	dnp = of_find_node_by_type(NULL, "open-pic");
-	if (dnp == NULL)
-		return;
-
-	prop = of_get_property(dnp, "reg", &size);
-	paddr = (phys_addr_t)of_translate_address(dnp, prop);
-
-	mpic = mpic_alloc(dnp, paddr, MPIC_PRIMARY | MPIC_WANTS_RESET, 4, 32, " EPIC     ");
+	mpic = mpic_alloc(NULL, 0, MPIC_WANTS_RESET,
+			4, 32, " EPIC     ");
 	BUG_ON(mpic == NULL);
 
 	/* PCI IRQs */
-	mpic_assign_isu(mpic, 0, paddr + 0x10200);
+	mpic_assign_isu(mpic, 0, mpic->paddr + 0x10200);
 
 	/* I2C */
-	mpic_assign_isu(mpic, 1, paddr + 0x11000);
+	mpic_assign_isu(mpic, 1, mpic->paddr + 0x11000);
 
 	/* ttyS0, ttyS1 */
-	mpic_assign_isu(mpic, 2, paddr + 0x11100);
+	mpic_assign_isu(mpic, 2, mpic->paddr + 0x11100);
 
 	mpic_init(mpic);
 }
diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
index f8f33e1..f3350d7 100644
--- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
+++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
@@ -102,31 +102,14 @@ static void __init mpc7448_hpc2_setup_arch(void)
 static void __init mpc7448_hpc2_init_IRQ(void)
 {
 	struct mpic *mpic;
-	phys_addr_t mpic_paddr = 0;
-	struct device_node *tsi_pic;
 #ifdef CONFIG_PCI
 	unsigned int cascade_pci_irq;
 	struct device_node *tsi_pci;
 	struct device_node *cascade_node = NULL;
 #endif
 
-	tsi_pic = of_find_node_by_type(NULL, "open-pic");
-	if (tsi_pic) {
-		unsigned int size;
-		const void *prop = of_get_property(tsi_pic, "reg", &size);
-		mpic_paddr = of_translate_address(tsi_pic, prop);
-	}
-
-	if (mpic_paddr == 0) {
-		printk("%s: No tsi108 PIC found !\n", __func__);
-		return;
-	}
-
-	DBG("%s: tsi108 pic phys_addr = 0x%x\n", __func__,
-	    (u32) mpic_paddr);
-
-	mpic = mpic_alloc(tsi_pic, mpic_paddr,
-			MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET |
+	mpic = mpic_alloc(NULL, 0,
+			MPIC_BIG_ENDIAN | MPIC_WANTS_RESET |
 			MPIC_SPV_EOI | MPIC_NO_PTHROU_DIS | MPIC_REGSET_TSI108,
 			24,
 			NR_IRQS-4, /* num_sources used */
@@ -134,7 +117,7 @@ static void __init mpc7448_hpc2_init_IRQ(void)
 
 	BUG_ON(mpic == NULL);
 
-	mpic_assign_isu(mpic, 0, mpic_paddr + 0x100);
+	mpic_assign_isu(mpic, 0, mpic->paddr + 0x100);
 
 	mpic_init(mpic);
 
@@ -159,7 +142,6 @@ static void __init mpc7448_hpc2_init_IRQ(void)
 #endif
 	/* Configure MPIC outputs to CPU0 */
 	tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0);
-	of_node_put(tsi_pic);
 }
 
 void mpc7448_hpc2_show_cpuinfo(struct seq_file *m)
diff --git a/arch/powerpc/platforms/embedded6xx/storcenter.c b/arch/powerpc/platforms/embedded6xx/storcenter.c
index f1eebca..afa6388 100644
--- a/arch/powerpc/platforms/embedded6xx/storcenter.c
+++ b/arch/powerpc/platforms/embedded6xx/storcenter.c
@@ -83,35 +83,17 @@ static void __init storcenter_setup_arch(void)
 static void __init storcenter_init_IRQ(void)
 {
 	struct mpic *mpic;
-	struct device_node *dnp;
-	const void *prop;
-	int size;
-	phys_addr_t paddr;
-
-	dnp = of_find_node_by_type(NULL, "open-pic");
-	if (dnp == NULL)
-		return;
-
-	prop = of_get_property(dnp, "reg", &size);
-	if (prop == NULL) {
-		of_node_put(dnp);
-		return;
-	}
-
-	paddr = (phys_addr_t)of_translate_address(dnp, prop);
-	mpic = mpic_alloc(dnp, paddr, MPIC_PRIMARY | MPIC_WANTS_RESET,
-			16, 32, " OpenPIC  ");
-
-	of_node_put(dnp);
 
+	mpic = mpic_alloc(NULL, 0, MPIC_WANTS_RESET,
+			16, 32, " OpenPIC  ");
 	BUG_ON(mpic == NULL);
 
 	/*
 	 * 16 Serial Interrupts followed by 16 Internal Interrupts.
 	 * I2C is the second internal, so it is at 17, 0x11020.
 	 */
-	mpic_assign_isu(mpic, 0, paddr + 0x10200);
-	mpic_assign_isu(mpic, 1, paddr + 0x11000);
+	mpic_assign_isu(mpic, 0, mpic->paddr + 0x10200);
+	mpic_assign_isu(mpic, 1, mpic->paddr + 0x11000);
 
 	mpic_init(mpic);
 }
diff --git a/arch/powerpc/platforms/embedded6xx/wii.c b/arch/powerpc/platforms/embedded6xx/wii.c
index 1b5dc1a..6d8dadf 100644
--- a/arch/powerpc/platforms/embedded6xx/wii.c
+++ b/arch/powerpc/platforms/embedded6xx/wii.c
@@ -79,24 +79,19 @@ void __init wii_memory_fixups(void)
 	BUG_ON(memblock.memory.cnt != 2);
 	BUG_ON(!page_aligned(p[0].base) || !page_aligned(p[1].base));
 
-	p[0].size = _ALIGN_DOWN(p[0].size, PAGE_SIZE);
-	p[1].size = _ALIGN_DOWN(p[1].size, PAGE_SIZE);
+	/* trim unaligned tail */
+	memblock_remove(ALIGN(p[1].base + p[1].size, PAGE_SIZE),
+			(phys_addr_t)ULLONG_MAX);
 
-	wii_hole_start = p[0].base + p[0].size;
+	/* determine hole, add & reserve them */
+	wii_hole_start = ALIGN(p[0].base + p[0].size, PAGE_SIZE);
 	wii_hole_size = p[1].base - wii_hole_start;
-
-	pr_info("MEM1: <%08llx %08llx>\n", p[0].base, p[0].size);
-	pr_info("HOLE: <%08lx %08lx>\n", wii_hole_start, wii_hole_size);
-	pr_info("MEM2: <%08llx %08llx>\n", p[1].base, p[1].size);
-
-	p[0].size += wii_hole_size + p[1].size;
-
-	memblock.memory.cnt = 1;
-	memblock_analyze();
-
-	/* reserve the hole */
+	memblock_add(wii_hole_start, wii_hole_size);
 	memblock_reserve(wii_hole_start, wii_hole_size);
 
+	BUG_ON(memblock.memory.cnt != 1);
+	__memblock_dump_all();
+
 	/* allow ioremapping the address space in the hole */
 	__allow_ioremap_reserved = 1;
 }
diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c
index ea0acbd..8fc6258 100644
--- a/arch/powerpc/platforms/iseries/setup.c
+++ b/arch/powerpc/platforms/iseries/setup.c
@@ -563,7 +563,8 @@ static void yield_shared_processor(void)
 static void iseries_shared_idle(void)
 {
 	while (1) {
-		tick_nohz_stop_sched_tick(1);
+		tick_nohz_idle_enter();
+		rcu_idle_enter();
 		while (!need_resched() && !hvlpevent_is_pending()) {
 			local_irq_disable();
 			ppc64_runlatch_off();
@@ -577,7 +578,8 @@ static void iseries_shared_idle(void)
 		}
 
 		ppc64_runlatch_on();
-		tick_nohz_restart_sched_tick();
+		rcu_idle_exit();
+		tick_nohz_idle_exit();
 
 		if (hvlpevent_is_pending())
 			process_iSeries_events();
@@ -593,7 +595,8 @@ static void iseries_dedicated_idle(void)
 	set_thread_flag(TIF_POLLING_NRFLAG);
 
 	while (1) {
-		tick_nohz_stop_sched_tick(1);
+		tick_nohz_idle_enter();
+		rcu_idle_enter();
 		if (!need_resched()) {
 			while (!need_resched()) {
 				ppc64_runlatch_off();
@@ -610,7 +613,8 @@ static void iseries_dedicated_idle(void)
 		}
 
 		ppc64_runlatch_on();
-		tick_nohz_restart_sched_tick();
+		rcu_idle_exit();
+		tick_nohz_idle_exit();
 		preempt_enable_no_resched();
 		schedule();
 		preempt_disable();
diff --git a/arch/powerpc/platforms/iseries/smp.c b/arch/powerpc/platforms/iseries/smp.c
index 7e2a551..02df49f 100644
--- a/arch/powerpc/platforms/iseries/smp.c
+++ b/arch/powerpc/platforms/iseries/smp.c
@@ -24,7 +24,7 @@
 #include <linux/spinlock.h>
 #include <linux/cache.h>
 #include <linux/err.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/cpu.h>
 
 #include <asm/ptrace.h>
diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c
index dd2e48b..401e3f3 100644
--- a/arch/powerpc/platforms/maple/pci.c
+++ b/arch/powerpc/platforms/maple/pci.c
@@ -207,6 +207,54 @@ static volatile void __iomem *u3_ht_cfg_access(struct pci_controller* hose,
 		return hose->cfg_data + u3_ht_cfa1(bus, devfn, offset);
 }
 
+static int u3_ht_root_read_config(struct pci_controller *hose, u8 offset,
+				  int len, u32 *val)
+{
+	volatile void __iomem *addr;
+
+	addr = hose->cfg_addr;
+	addr += ((offset & ~3) << 2) + (4 - len - (offset & 3));
+
+	switch (len) {
+	case 1:
+		*val = in_8(addr);
+		break;
+	case 2:
+		*val = in_be16(addr);
+		break;
+	default:
+		*val = in_be32(addr);
+		break;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int u3_ht_root_write_config(struct pci_controller *hose, u8 offset,
+				  int len, u32 val)
+{
+	volatile void __iomem *addr;
+
+	addr = hose->cfg_addr + ((offset & ~3) << 2) + (4 - len - (offset & 3));
+
+	if (offset >= PCI_BASE_ADDRESS_0 && offset < PCI_CAPABILITY_LIST)
+		return PCIBIOS_SUCCESSFUL;
+
+	switch (len) {
+	case 1:
+		out_8(addr, val);
+		break;
+	case 2:
+		out_be16(addr, val);
+		break;
+	default:
+		out_be32(addr, val);
+		break;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
 static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn,
 			     int offset, int len, u32 *val)
 {
@@ -217,6 +265,9 @@ static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn,
 	if (hose == NULL)
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
+	if (bus->number == hose->first_busno && devfn == PCI_DEVFN(0, 0))
+		return u3_ht_root_read_config(hose, offset, len, val);
+
 	if (offset > 0xff)
 		return PCIBIOS_BAD_REGISTER_NUMBER;
 
@@ -252,6 +303,9 @@ static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn,
 	if (hose == NULL)
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
+	if (bus->number == hose->first_busno && devfn == PCI_DEVFN(0, 0))
+		return u3_ht_root_write_config(hose, offset, len, val);
+
 	if (offset > 0xff)
 		return PCIBIOS_BAD_REGISTER_NUMBER;
 
@@ -428,6 +482,7 @@ static void __init setup_u3_ht(struct pci_controller* hose)
 	 * reg_property and using some accessor functions instead
 	 */
 	hose->cfg_data = ioremap(0xf2000000, 0x02000000);
+	hose->cfg_addr = ioremap(0xf8070000, 0x1000);
 
 	hose->first_busno = 0;
 	hose->last_busno = 0xef;
diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c
index 4c37204..0bcbfe7 100644
--- a/arch/powerpc/platforms/maple/setup.c
+++ b/arch/powerpc/platforms/maple/setup.c
@@ -221,7 +221,7 @@ static void __init maple_init_IRQ(void)
 	unsigned long openpic_addr = 0;
 	int naddr, n, i, opplen, has_isus = 0;
 	struct mpic *mpic;
-	unsigned int flags = MPIC_PRIMARY;
+	unsigned int flags = 0;
 
 	/* Locate MPIC in the device-tree. Note that there is a bug
 	 * in Maple device-tree where the type of the controller is
diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c
index 6f35582..98b7a7c 100644
--- a/arch/powerpc/platforms/pasemi/setup.c
+++ b/arch/powerpc/platforms/pasemi/setup.c
@@ -224,7 +224,7 @@ static __init void pas_init_IRQ(void)
 	openpic_addr = of_read_number(opprop, naddr);
 	printk(KERN_DEBUG "OpenPIC addr: %lx\n", openpic_addr);
 
-	mpic_flags = MPIC_PRIMARY | MPIC_LARGE_VECTORS | MPIC_NO_BIAS;
+	mpic_flags = MPIC_LARGE_VECTORS | MPIC_NO_BIAS;
 
 	nmiprop = of_get_property(mpic_node, "nmi-source", NULL);
 	if (nmiprop)
@@ -234,7 +234,7 @@ static __init void pas_init_IRQ(void)
 			  mpic_flags, 0, 0, "PASEMI-OPIC");
 	BUG_ON(!mpic);
 
-	mpic_assign_isu(mpic, 0, openpic_addr + 0x10000);
+	mpic_assign_isu(mpic, 0, mpic->paddr + 0x10000);
 	mpic_init(mpic);
 	/* The NMI/MCK source needs to be prio 15 */
 	if (nmiprop) {
diff --git a/arch/powerpc/platforms/powermac/cpufreq_32.c b/arch/powerpc/platforms/powermac/cpufreq_32.c
index 04af5f4..1fc386a 100644
--- a/arch/powerpc/platforms/powermac/cpufreq_32.c
+++ b/arch/powerpc/platforms/powermac/cpufreq_32.c
@@ -23,7 +23,7 @@
 #include <linux/pmu.h>
 #include <linux/cpufreq.h>
 #include <linux/init.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/hardirq.h>
 #include <asm/prom.h>
 #include <asm/machdep.h>
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index 901bfbd..7761aab 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -52,13 +52,8 @@ struct device_node *of_irq_dflt_pic;
 /* Default addresses */
 static volatile struct pmac_irq_hw __iomem *pmac_irq_hw[4];
 
-#define GC_LEVEL_MASK		0x3ff00000
-#define OHARE_LEVEL_MASK	0x1ff00000
-#define HEATHROW_LEVEL_MASK	0x1ff00000
-
 static int max_irqs;
 static int max_real_irqs;
-static u32 level_mask[4];
 
 static DEFINE_RAW_SPINLOCK(pmac_pic_lock);
 
@@ -217,8 +212,7 @@ static irqreturn_t gatwick_action(int cpl, void *dev_id)
 	for (irq = max_irqs; (irq -= 32) >= max_real_irqs; ) {
 		int i = irq >> 5;
 		bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i];
-		/* We must read level interrupts from the level register */
-		bits |= (in_le32(&pmac_irq_hw[i]->level) & level_mask[i]);
+		bits |= in_le32(&pmac_irq_hw[i]->level);
 		bits &= ppc_cached_irq_mask[i];
 		if (bits == 0)
 			continue;
@@ -248,8 +242,7 @@ static unsigned int pmac_pic_get_irq(void)
 	for (irq = max_real_irqs; (irq -= 32) >= 0; ) {
 		int i = irq >> 5;
 		bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i];
-		/* We must read level interrupts from the level register */
-		bits |= (in_le32(&pmac_irq_hw[i]->level) & level_mask[i]);
+		bits |= in_le32(&pmac_irq_hw[i]->level);
 		bits &= ppc_cached_irq_mask[i];
 		if (bits == 0)
 			continue;
@@ -284,19 +277,14 @@ static int pmac_pic_host_match(struct irq_host *h, struct device_node *node)
 static int pmac_pic_host_map(struct irq_host *h, unsigned int virq,
 			     irq_hw_number_t hw)
 {
-	int level;
-
 	if (hw >= max_irqs)
 		return -EINVAL;
 
 	/* Mark level interrupts, set delayed disable for edge ones and set
 	 * handlers
 	 */
-	level = !!(level_mask[hw >> 5] & (1UL << (hw & 0x1f)));
-	if (level)
-		irq_set_status_flags(virq, IRQ_LEVEL);
-	irq_set_chip_and_handler(virq, &pmac_pic,
-				 level ? handle_level_irq : handle_edge_irq);
+	irq_set_status_flags(virq, IRQ_LEVEL);
+	irq_set_chip_and_handler(virq, &pmac_pic, handle_level_irq);
 	return 0;
 }
 
@@ -334,21 +322,14 @@ static void __init pmac_pic_probe_oldstyle(void)
 
 	if ((master = of_find_node_by_name(NULL, "gc")) != NULL) {
 		max_irqs = max_real_irqs = 32;
-		level_mask[0] = GC_LEVEL_MASK;
 	} else if ((master = of_find_node_by_name(NULL, "ohare")) != NULL) {
 		max_irqs = max_real_irqs = 32;
-		level_mask[0] = OHARE_LEVEL_MASK;
-
 		/* We might have a second cascaded ohare */
 		slave = of_find_node_by_name(NULL, "pci106b,7");
-		if (slave) {
+		if (slave)
 			max_irqs = 64;
-			level_mask[1] = OHARE_LEVEL_MASK;
-		}
 	} else if ((master = of_find_node_by_name(NULL, "mac-io")) != NULL) {
 		max_irqs = max_real_irqs = 64;
-		level_mask[0] = HEATHROW_LEVEL_MASK;
-		level_mask[1] = 0;
 
 		/* We might have a second cascaded heathrow */
 		slave = of_find_node_by_name(master, "mac-io");
@@ -363,11 +344,8 @@ static void __init pmac_pic_probe_oldstyle(void)
 		}
 
 		/* We found a slave */
-		if (slave) {
+		if (slave)
 			max_irqs = 128;
-			level_mask[2] = HEATHROW_LEVEL_MASK;
-			level_mask[3] = 0;
-		}
 	}
 	BUG_ON(master == NULL);
 
@@ -464,18 +442,6 @@ int of_irq_map_oldworld(struct device_node *device, int index,
 }
 #endif /* CONFIG_PPC32 */
 
-static void pmac_u3_cascade(unsigned int irq, struct irq_desc *desc)
-{
-	struct irq_chip *chip = irq_desc_get_chip(desc);
-	struct mpic *mpic = irq_desc_get_handler_data(desc);
-	unsigned int cascade_irq = mpic_get_one_irq(mpic);
-
-	if (cascade_irq != NO_IRQ)
-		generic_handle_irq(cascade_irq);
-
-	chip->irq_eoi(&desc->irq_data);
-}
-
 static void __init pmac_pic_setup_mpic_nmi(struct mpic *mpic)
 {
 #if defined(CONFIG_XMON) && defined(CONFIG_PPC32)
@@ -498,14 +464,8 @@ static struct mpic * __init pmac_setup_one_mpic(struct device_node *np,
 						int master)
 {
 	const char *name = master ? " MPIC 1   " : " MPIC 2   ";
-	struct resource r;
 	struct mpic *mpic;
-	unsigned int flags = master ? MPIC_PRIMARY : 0;
-	int rc;
-
-	rc = of_address_to_resource(np, 0, &r);
-	if (rc)
-		return NULL;
+	unsigned int flags = master ? 0 : MPIC_SECONDARY;
 
 	pmac_call_feature(PMAC_FTR_ENABLE_MPIC, np, 0, 0);
 
@@ -519,7 +479,7 @@ static struct mpic * __init pmac_setup_one_mpic(struct device_node *np,
 	if (master && (flags & MPIC_BIG_ENDIAN))
 		flags |= MPIC_U3_HT_IRQS;
 
-	mpic = mpic_alloc(np, r.start, flags, 0, 0, name);
+	mpic = mpic_alloc(np, 0, flags, 0, 0, name);
 	if (mpic == NULL)
 		return NULL;
 
@@ -532,7 +492,6 @@ static int __init pmac_pic_probe_mpic(void)
 {
 	struct mpic *mpic1, *mpic2;
 	struct device_node *np, *master = NULL, *slave = NULL;
-	unsigned int cascade;
 
 	/* We can have up to 2 MPICs cascaded */
 	for (np = NULL; (np = of_find_node_by_type(np, "open-pic"))
@@ -568,27 +527,14 @@ static int __init pmac_pic_probe_mpic(void)
 
 	of_node_put(master);
 
-	/* No slave, let's go out */
-	if (slave == NULL)
-		return 0;
-
-	/* Get/Map slave interrupt */
-	cascade = irq_of_parse_and_map(slave, 0);
-	if (cascade == NO_IRQ) {
-		printk(KERN_ERR "Failed to map cascade IRQ\n");
-		return 0;
-	}
-
-	mpic2 = pmac_setup_one_mpic(slave, 0);
-	if (mpic2 == NULL) {
-		printk(KERN_ERR "Failed to setup slave MPIC\n");
+	/* Set up a cascaded controller, if present */
+	if (slave) {
+		mpic2 = pmac_setup_one_mpic(slave, 0);
+		if (mpic2 == NULL)
+			printk(KERN_ERR "Failed to setup slave MPIC\n");
 		of_node_put(slave);
-		return 0;
 	}
-	irq_set_handler_data(cascade, mpic2);
-	irq_set_chained_handler(cascade, pmac_u3_cascade);
 
-	of_node_put(slave);
 	return 0;
 }
 
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 96580b1..970ea1d 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -494,11 +494,15 @@ static int __init pmac_declare_of_platform_devices(void)
 		return -1;
 
 	np = of_find_node_by_name(NULL, "valkyrie");
-	if (np)
+	if (np) {
 		of_platform_device_create(np, "valkyrie", NULL);
+		of_node_put(np);
+	}
 	np = of_find_node_by_name(NULL, "platinum");
-	if (np)
+	if (np) {
 		of_platform_device_create(np, "platinum", NULL);
+		of_node_put(np);
+	}
         np = of_find_node_by_type(NULL, "smu");
         if (np) {
 		of_platform_device_create(np, "smu", NULL);
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index 9b6a820..44d7692 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -200,7 +200,7 @@ static int psurge_secondary_ipi_init(void)
 
 	if (psurge_secondary_virq)
 		rc = request_irq(psurge_secondary_virq, psurge_ipi_intr,
-			IRQF_PERCPU, "IPI", NULL);
+			IRQF_PERCPU | IRQF_NO_THREAD, "IPI", NULL);
 
 	if (rc)
 		pr_err("Failed to setup secondary cpu IPI\n");
@@ -408,13 +408,13 @@ static int __init smp_psurge_kick_cpu(int nr)
 
 static struct irqaction psurge_irqaction = {
 	.handler = psurge_ipi_intr,
-	.flags = IRQF_PERCPU,
+	.flags = IRQF_PERCPU | IRQF_NO_THREAD,
 	.name = "primary IPI",
 };
 
 static void __init smp_psurge_setup_cpu(int cpu_nr)
 {
-	if (cpu_nr != 0)
+	if (cpu_nr != 0 || !psurge_start)
 		return;
 
 	/* reset the entry point so if we get another intr we won't
diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile
index 3185300..bcc3cb4 100644
--- a/arch/powerpc/platforms/powernv/Makefile
+++ b/arch/powerpc/platforms/powernv/Makefile
@@ -2,4 +2,4 @@ obj-y			+= setup.o opal-takeover.o opal-wrappers.o opal.o
 obj-y			+= opal-rtc.o opal-nvram.o
 
 obj-$(CONFIG_SMP)	+= smp.o
-obj-$(CONFIG_PCI)	+= pci.o pci-p5ioc2.o
+obj-$(CONFIG_PCI)	+= pci.o pci-p5ioc2.o pci-ioda.o
diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S
index 4a3f46d..3bb07e5 100644
--- a/arch/powerpc/platforms/powernv/opal-wrappers.S
+++ b/arch/powerpc/platforms/powernv/opal-wrappers.S
@@ -99,3 +99,11 @@ OPAL_CALL(opal_write_oppanel,			OPAL_WRITE_OPPANEL);
 OPAL_CALL(opal_pci_map_pe_dma_window,		OPAL_PCI_MAP_PE_DMA_WINDOW);
 OPAL_CALL(opal_pci_map_pe_dma_window_real,	OPAL_PCI_MAP_PE_DMA_WINDOW_REAL);
 OPAL_CALL(opal_pci_reset,			OPAL_PCI_RESET);
+OPAL_CALL(opal_pci_get_hub_diag_data,		OPAL_PCI_GET_HUB_DIAG_DATA);
+OPAL_CALL(opal_pci_get_phb_diag_data,		OPAL_PCI_GET_PHB_DIAG_DATA);
+OPAL_CALL(opal_pci_fence_phb,			OPAL_PCI_FENCE_PHB);
+OPAL_CALL(opal_pci_reinit,			OPAL_PCI_REINIT);
+OPAL_CALL(opal_pci_mask_pe_error,		OPAL_PCI_MASK_PE_ERROR);
+OPAL_CALL(opal_set_slot_led_status,		OPAL_SET_SLOT_LED_STATUS);
+OPAL_CALL(opal_get_epow_status,			OPAL_GET_EPOW_STATUS);
+OPAL_CALL(opal_set_system_attention_led,	OPAL_SET_SYSTEM_ATTENTION_LED);
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
new file mode 100644
index 0000000..f31162c
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -0,0 +1,1330 @@
+/*
+ * Support PCI/PCIe on PowerNV platforms
+ *
+ * Copyright 2011 Benjamin Herrenschmidt, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/msi.h>
+
+#include <asm/sections.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#include <asm/machdep.h>
+#include <asm/ppc-pci.h>
+#include <asm/opal.h>
+#include <asm/iommu.h>
+#include <asm/tce.h>
+#include <asm/abs_addr.h>
+
+#include "powernv.h"
+#include "pci.h"
+
+struct resource_wrap {
+	struct list_head	link;
+	resource_size_t		size;
+	resource_size_t		align;
+	struct pci_dev		*dev;	/* Set if it's a device */
+	struct pci_bus		*bus;	/* Set if it's a bridge */
+};
+
+static int __pe_printk(const char *level, const struct pnv_ioda_pe *pe,
+		       struct va_format *vaf)
+{
+	char pfix[32];
+
+	if (pe->pdev)
+		strlcpy(pfix, dev_name(&pe->pdev->dev), sizeof(pfix));
+	else
+		sprintf(pfix, "%04x:%02x     ",
+			pci_domain_nr(pe->pbus), pe->pbus->number);
+	return printk("pci %s%s: [PE# %.3d] %pV", level, pfix, pe->pe_number, vaf);
+}
+
+#define define_pe_printk_level(func, kern_level)		\
+static int func(const struct pnv_ioda_pe *pe, const char *fmt, ...)	\
+{								\
+	struct va_format vaf;					\
+	va_list args;						\
+	int r;							\
+								\
+	va_start(args, fmt);					\
+								\
+	vaf.fmt = fmt;						\
+	vaf.va = &args;						\
+								\
+	r = __pe_printk(kern_level, pe, &vaf);			\
+	va_end(args);						\
+								\
+	return r;						\
+}								\
+
+define_pe_printk_level(pe_err, KERN_ERR);
+define_pe_printk_level(pe_warn, KERN_WARNING);
+define_pe_printk_level(pe_info, KERN_INFO);
+
+
+/* Calculate resource usage & alignment requirement of a single
+ * device. This will also assign all resources within the device
+ * for a given type starting at 0 for the biggest one and then
+ * assigning in decreasing order of size.
+ */
+static void __devinit pnv_ioda_calc_dev(struct pci_dev *dev, unsigned int flags,
+					resource_size_t *size,
+					resource_size_t *align)
+{
+	resource_size_t start;
+	struct resource *r;
+	int i;
+
+	pr_devel("  -> CDR %s\n", pci_name(dev));
+
+	*size = *align = 0;
+
+	/* Clear the resources out and mark them all unset */
+	for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
+		r = &dev->resource[i];
+		if (!(r->flags & flags))
+		    continue;
+		if (r->start) {
+			r->end -= r->start;
+			r->start = 0;
+		}
+		r->flags |= IORESOURCE_UNSET;
+	}
+
+	/* We currently keep all memory resources together, we
+	 * will handle prefetch & 64-bit separately in the future
+	 * but for now we stick everybody in M32
+	 */
+	start = 0;
+	for (;;) {
+		resource_size_t max_size = 0;
+		int max_no = -1;
+
+		/* Find next biggest resource */
+		for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
+			r = &dev->resource[i];
+			if (!(r->flags & IORESOURCE_UNSET) ||
+			    !(r->flags & flags))
+				continue;
+			if (resource_size(r) > max_size) {
+				max_size = resource_size(r);
+				max_no = i;
+			}
+		}
+		if (max_no < 0)
+			break;
+		r = &dev->resource[max_no];
+		if (max_size > *align)
+			*align = max_size;
+		*size += max_size;
+		r->start = start;
+		start += max_size;
+		r->end = r->start + max_size - 1;
+		r->flags &= ~IORESOURCE_UNSET;
+		pr_devel("  ->     R%d %016llx..%016llx\n",
+			 max_no, r->start, r->end);
+	}
+	pr_devel("  <- CDR %s size=%llx align=%llx\n",
+		 pci_name(dev), *size, *align);
+}
+
+/* Allocate a resource "wrap" for a given device or bridge and
+ * insert it at the right position in the sorted list
+ */
+static void __devinit pnv_ioda_add_wrap(struct list_head *list,
+					struct pci_bus *bus,
+					struct pci_dev *dev,
+					resource_size_t size,
+					resource_size_t align)
+{
+	struct resource_wrap *w1, *w = kzalloc(sizeof(*w), GFP_KERNEL);
+
+	w->size = size;
+	w->align = align;
+	w->dev = dev;
+	w->bus = bus;
+
+	list_for_each_entry(w1, list, link) {
+		if (w1->align < align) {
+			list_add_tail(&w->link, &w1->link);
+			return;
+		}
+	}
+	list_add_tail(&w->link, list);
+}
+
+/* Offset device resources of a given type */
+static void __devinit pnv_ioda_offset_dev(struct pci_dev *dev,
+					  unsigned int flags,
+					  resource_size_t offset)
+{
+	struct resource *r;
+	int i;
+
+	pr_devel("  -> ODR %s [%x] +%016llx\n", pci_name(dev), flags, offset);
+
+	for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
+		r = &dev->resource[i];
+		if (r->flags & flags) {
+			dev->resource[i].start += offset;
+			dev->resource[i].end += offset;
+		}
+	}
+
+	pr_devel("  <- ODR %s [%x] +%016llx\n", pci_name(dev), flags, offset);
+}
+
+/* Offset bus resources (& all children) of a given type */
+static void __devinit pnv_ioda_offset_bus(struct pci_bus *bus,
+					  unsigned int flags,
+					  resource_size_t offset)
+{
+	struct resource *r;
+	struct pci_dev *dev;
+	struct pci_bus *cbus;
+	int i;
+
+	pr_devel("  -> OBR %s [%x] +%016llx\n",
+		 bus->self ? pci_name(bus->self) : "root", flags, offset);
+
+	for (i = 0; i < 2; i++) {
+		r = bus->resource[i];
+		if (r && (r->flags & flags)) {
+			bus->resource[i]->start += offset;
+			bus->resource[i]->end += offset;
+		}
+	}
+	list_for_each_entry(dev, &bus->devices, bus_list)
+		pnv_ioda_offset_dev(dev, flags, offset);
+	list_for_each_entry(cbus, &bus->children, node)
+		pnv_ioda_offset_bus(cbus, flags, offset);
+
+	pr_devel("  <- OBR %s [%x]\n",
+		 bus->self ? pci_name(bus->self) : "root", flags);
+}
+
+/* This is the guts of our IODA resource allocation. This is called
+ * recursively for each bus in the system. It calculates all the
+ * necessary size and requirements for children and assign them
+ * resources such that:
+ *
+ *   - Each function fits in it's own contiguous set of IO/M32
+ *     segment
+ *
+ *   - All segments behind a P2P bridge are contiguous and obey
+ *     alignment constraints of those bridges
+ */
+static void __devinit pnv_ioda_calc_bus(struct pci_bus *bus, unsigned int flags,
+					resource_size_t *size,
+					resource_size_t *align)
+{
+	struct pci_controller *hose = pci_bus_to_host(bus);
+	struct pnv_phb *phb = hose->private_data;
+	resource_size_t dev_size, dev_align, start;
+	resource_size_t min_align, min_balign;
+	struct pci_dev *cdev;
+	struct pci_bus *cbus;
+	struct list_head head;
+	struct resource_wrap *w;
+	unsigned int bres;
+
+	*size = *align = 0;
+
+	pr_devel("-> CBR %s [%x]\n",
+		 bus->self ? pci_name(bus->self) : "root", flags);
+
+	/* Calculate alignment requirements based on the type
+	 * of resource we are working on
+	 */
+	if (flags & IORESOURCE_IO) {
+		bres = 0;
+		min_align = phb->ioda.io_segsize;
+		min_balign = 0x1000;
+	} else {
+		bres = 1;
+		min_align = phb->ioda.m32_segsize;
+		min_balign = 0x100000;
+	}
+
+	/* Gather all our children resources ordered by alignment */
+	INIT_LIST_HEAD(&head);
+
+	/*   - Busses */
+	list_for_each_entry(cbus, &bus->children, node) {
+		pnv_ioda_calc_bus(cbus, flags, &dev_size, &dev_align);
+		pnv_ioda_add_wrap(&head, cbus, NULL, dev_size, dev_align);
+	}
+
+	/*   - Devices */
+	list_for_each_entry(cdev, &bus->devices, bus_list) {
+		pnv_ioda_calc_dev(cdev, flags, &dev_size, &dev_align);
+		/* Align them to segment size */
+		if (dev_align < min_align)
+			dev_align = min_align;
+		pnv_ioda_add_wrap(&head, NULL, cdev, dev_size, dev_align);
+	}
+	if (list_empty(&head))
+		goto empty;
+
+	/* Now we can do two things: assign offsets to them within that
+	 * level and get our total alignment & size requirements. The
+	 * assignment algorithm is going to be uber-trivial for now, we
+	 * can try to be smarter later at filling out holes.
+	 */
+	start = bus->self ? 0 : bus->resource[bres]->start;
+
+	/* Don't hand out IO 0 */
+	if ((flags & IORESOURCE_IO) && !bus->self)
+		start += 0x1000;
+
+	while(!list_empty(&head)) {
+		w = list_first_entry(&head, struct resource_wrap, link);
+		list_del(&w->link);
+		if (w->size) {
+			if (start) {
+				start = ALIGN(start, w->align);
+				if (w->dev)
+					pnv_ioda_offset_dev(w->dev,flags,start);
+				else if (w->bus)
+					pnv_ioda_offset_bus(w->bus,flags,start);
+			}
+			if (w->align > *align)
+				*align = w->align;
+		}
+		start += w->size;
+		kfree(w);
+	}
+	*size = start;
+
+	/* Align and setup bridge resources */
+	*align = max_t(resource_size_t, *align,
+		       max_t(resource_size_t, min_align, min_balign));
+	*size = ALIGN(*size,
+		      max_t(resource_size_t, min_align, min_balign));
+ empty:
+	/* Only setup P2P's, not the PHB itself */
+	if (bus->self) {
+		WARN_ON(bus->resource[bres] == NULL);
+		bus->resource[bres]->start = 0;
+		bus->resource[bres]->flags = (*size) ? flags : 0;
+		bus->resource[bres]->end = (*size) ? (*size - 1) : 0;
+
+		/* Clear prefetch bus resources for now */
+		bus->resource[2]->flags = 0;
+	}
+
+	pr_devel("<- CBR %s [%x] *size=%016llx *align=%016llx\n",
+		 bus->self ? pci_name(bus->self) : "root", flags,*size,*align);
+}
+
+static struct pci_dn *pnv_ioda_get_pdn(struct pci_dev *dev)
+{
+	struct device_node *np;
+
+	np = pci_device_to_OF_node(dev);
+	if (!np)
+		return NULL;
+	return PCI_DN(np);
+}
+
+static void __devinit pnv_ioda_setup_pe_segments(struct pci_dev *dev)
+{
+	struct pci_controller *hose = pci_bus_to_host(dev->bus);
+	struct pnv_phb *phb = hose->private_data;
+	struct pci_dn *pdn = pnv_ioda_get_pdn(dev);
+	unsigned int pe, i;
+	resource_size_t pos;
+	struct resource io_res;
+	struct resource m32_res;
+	struct pci_bus_region region;
+	int rc;
+
+	/* Anything not referenced in the device-tree gets PE#0 */
+	pe = pdn ? pdn->pe_number : 0;
+
+	/* Calculate the device min/max */
+	io_res.start = m32_res.start = (resource_size_t)-1;
+	io_res.end = m32_res.end = 0;
+	io_res.flags = IORESOURCE_IO;
+	m32_res.flags = IORESOURCE_MEM;
+
+	for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
+		struct resource *r = NULL;
+		if (dev->resource[i].flags & IORESOURCE_IO)
+			r = &io_res;
+		if (dev->resource[i].flags & IORESOURCE_MEM)
+			r = &m32_res;
+		if (!r)
+			continue;
+		if (dev->resource[i].start < r->start)
+			r->start = dev->resource[i].start;
+		if (dev->resource[i].end > r->end)
+			r->end = dev->resource[i].end;
+	}
+
+	/* Setup IO segments */
+	if (io_res.start < io_res.end) {
+		pcibios_resource_to_bus(dev, &region, &io_res);
+		pos = region.start;
+		i = pos / phb->ioda.io_segsize;
+		while(i < phb->ioda.total_pe && pos <= region.end) {
+			if (phb->ioda.io_segmap[i]) {
+				pr_err("%s: Trying to use IO seg #%d which is"
+				       " already used by PE# %d\n",
+				       pci_name(dev), i,
+				       phb->ioda.io_segmap[i]);
+				/* XXX DO SOMETHING TO DISABLE DEVICE ? */
+				break;
+			}
+			phb->ioda.io_segmap[i] = pe;
+			rc = opal_pci_map_pe_mmio_window(phb->opal_id, pe,
+							 OPAL_IO_WINDOW_TYPE,
+							 0, i);
+			if (rc != OPAL_SUCCESS) {
+				pr_err("%s: OPAL error %d setting up mapping"
+				       " for IO seg# %d\n",
+				       pci_name(dev), rc, i);
+				/* XXX DO SOMETHING TO DISABLE DEVICE ? */
+				break;
+			}
+			pos += phb->ioda.io_segsize;
+			i++;
+		};
+	}
+
+	/* Setup M32 segments */
+	if (m32_res.start < m32_res.end) {
+		pcibios_resource_to_bus(dev, &region, &m32_res);
+		pos = region.start;
+		i = pos / phb->ioda.m32_segsize;
+		while(i < phb->ioda.total_pe && pos <= region.end) {
+			if (phb->ioda.m32_segmap[i]) {
+				pr_err("%s: Trying to use M32 seg #%d which is"
+				       " already used by PE# %d\n",
+				       pci_name(dev), i,
+				       phb->ioda.m32_segmap[i]);
+				/* XXX DO SOMETHING TO DISABLE DEVICE ? */
+				break;
+			}
+			phb->ioda.m32_segmap[i] = pe;
+			rc = opal_pci_map_pe_mmio_window(phb->opal_id, pe,
+							 OPAL_M32_WINDOW_TYPE,
+							 0, i);
+			if (rc != OPAL_SUCCESS) {
+				pr_err("%s: OPAL error %d setting up mapping"
+				       " for M32 seg# %d\n",
+				       pci_name(dev), rc, i);
+				/* XXX DO SOMETHING TO DISABLE DEVICE ? */
+				break;
+			}
+			pos += phb->ioda.m32_segsize;
+			i++;
+		}
+	}
+}
+
+/* Check if a resource still fits in the total IO or M32 range
+ * for a given PHB
+ */
+static int __devinit pnv_ioda_resource_fit(struct pci_controller *hose,
+					   struct resource *r)
+{
+	struct resource *bounds;
+
+	if (r->flags & IORESOURCE_IO)
+		bounds = &hose->io_resource;
+	else if (r->flags & IORESOURCE_MEM)
+		bounds = &hose->mem_resources[0];
+	else
+		return 1;
+
+	if (r->start >= bounds->start && r->end <= bounds->end)
+		return 1;
+	r->flags = 0;
+	return 0;
+}
+
+static void __devinit pnv_ioda_update_resources(struct pci_bus *bus)
+{
+	struct pci_controller *hose = pci_bus_to_host(bus);
+	struct pci_bus *cbus;
+	struct pci_dev *cdev;
+	unsigned int i;
+
+	/* We used to clear all device enables here. However it looks like
+	 * clearing MEM enable causes Obsidian (IPR SCS) to go bonkers,
+	 * and shoot fatal errors to the PHB which in turns fences itself
+	 * and we can't recover from that ... yet. So for now, let's leave
+	 * the enables as-is and hope for the best.
+	 */
+
+	/* Check if bus resources fit in our IO or M32 range */
+	for (i = 0; bus->self && (i < 2); i++) {
+		struct resource *r = bus->resource[i];
+		if (r && !pnv_ioda_resource_fit(hose, r))
+			pr_err("%s: Bus %d resource %d disabled, no room\n",
+			       pci_name(bus->self), bus->number, i);
+	}
+
+	/* Update self if it's not a PHB */
+	if (bus->self)
+		pci_setup_bridge(bus);
+
+	/* Update child devices */
+	list_for_each_entry(cdev, &bus->devices, bus_list) {
+		/* Check if resource fits, if not, disabled it */
+		for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
+			struct resource *r = &cdev->resource[i];
+			if (!pnv_ioda_resource_fit(hose, r))
+				pr_err("%s: Resource %d disabled, no room\n",
+				       pci_name(cdev), i);
+		}
+
+		/* Assign segments */
+		pnv_ioda_setup_pe_segments(cdev);
+
+		/* Update HW BARs */
+		for (i = 0; i <= PCI_ROM_RESOURCE; i++)
+			pci_update_resource(cdev, i);
+	}
+
+	/* Update child busses */
+	list_for_each_entry(cbus, &bus->children, node)
+		pnv_ioda_update_resources(cbus);
+}
+
+static int __devinit pnv_ioda_alloc_pe(struct pnv_phb *phb)
+{
+	unsigned long pe;
+
+	do {
+		pe = find_next_zero_bit(phb->ioda.pe_alloc,
+					phb->ioda.total_pe, 0);
+		if (pe >= phb->ioda.total_pe)
+			return IODA_INVALID_PE;
+	} while(test_and_set_bit(pe, phb->ioda.pe_alloc));
+
+	phb->ioda.pe_array[pe].pe_number = pe;
+	return pe;
+}
+
+static void __devinit pnv_ioda_free_pe(struct pnv_phb *phb, int pe)
+{
+	WARN_ON(phb->ioda.pe_array[pe].pdev);
+
+	memset(&phb->ioda.pe_array[pe], 0, sizeof(struct pnv_ioda_pe));
+	clear_bit(pe, phb->ioda.pe_alloc);
+}
+
+/* Currently those 2 are only used when MSIs are enabled, this will change
+ * but in the meantime, we need to protect them to avoid warnings
+ */
+#ifdef CONFIG_PCI_MSI
+static struct pnv_ioda_pe * __devinit __pnv_ioda_get_one_pe(struct pci_dev *dev)
+{
+	struct pci_controller *hose = pci_bus_to_host(dev->bus);
+	struct pnv_phb *phb = hose->private_data;
+	struct pci_dn *pdn = pnv_ioda_get_pdn(dev);
+
+	if (!pdn)
+		return NULL;
+	if (pdn->pe_number == IODA_INVALID_PE)
+		return NULL;
+	return &phb->ioda.pe_array[pdn->pe_number];
+}
+
+static struct pnv_ioda_pe * __devinit pnv_ioda_get_pe(struct pci_dev *dev)
+{
+	struct pnv_ioda_pe *pe = __pnv_ioda_get_one_pe(dev);
+
+	while (!pe && dev->bus->self) {
+		dev = dev->bus->self;
+		pe = __pnv_ioda_get_one_pe(dev);
+		if (pe)
+			pe = pe->bus_pe;
+	}
+	return pe;
+}
+#endif /* CONFIG_PCI_MSI */
+
+static int __devinit pnv_ioda_configure_pe(struct pnv_phb *phb,
+					   struct pnv_ioda_pe *pe)
+{
+	struct pci_dev *parent;
+	uint8_t bcomp, dcomp, fcomp;
+	long rc, rid_end, rid;
+
+	/* Bus validation ? */
+	if (pe->pbus) {
+		int count;
+
+		dcomp = OPAL_IGNORE_RID_DEVICE_NUMBER;
+		fcomp = OPAL_IGNORE_RID_FUNCTION_NUMBER;
+		parent = pe->pbus->self;
+		count = pe->pbus->subordinate - pe->pbus->secondary + 1;
+		switch(count) {
+		case  1: bcomp = OpalPciBusAll;		break;
+		case  2: bcomp = OpalPciBus7Bits;	break;
+		case  4: bcomp = OpalPciBus6Bits;	break;
+		case  8: bcomp = OpalPciBus5Bits;	break;
+		case 16: bcomp = OpalPciBus4Bits;	break;
+		case 32: bcomp = OpalPciBus3Bits;	break;
+		default:
+			pr_err("%s: Number of subordinate busses %d"
+			       " unsupported\n",
+			       pci_name(pe->pbus->self), count);
+			/* Do an exact match only */
+			bcomp = OpalPciBusAll;
+		}
+		rid_end = pe->rid + (count << 8);
+	} else {
+		parent = pe->pdev->bus->self;
+		bcomp = OpalPciBusAll;
+		dcomp = OPAL_COMPARE_RID_DEVICE_NUMBER;
+		fcomp = OPAL_COMPARE_RID_FUNCTION_NUMBER;
+		rid_end = pe->rid + 1;
+	}
+
+	/* Associate PE in PELT */
+	rc = opal_pci_set_pe(phb->opal_id, pe->pe_number, pe->rid,
+			     bcomp, dcomp, fcomp, OPAL_MAP_PE);
+	if (rc) {
+		pe_err(pe, "OPAL error %ld trying to setup PELT table\n", rc);
+		return -ENXIO;
+	}
+	opal_pci_eeh_freeze_clear(phb->opal_id, pe->pe_number,
+				  OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
+
+	/* Add to all parents PELT-V */
+	while (parent) {
+		struct pci_dn *pdn = pnv_ioda_get_pdn(parent);
+		if (pdn && pdn->pe_number != IODA_INVALID_PE) {
+			rc = opal_pci_set_peltv(phb->opal_id, pdn->pe_number,
+						pe->pe_number, OPAL_ADD_PE_TO_DOMAIN);
+			/* XXX What to do in case of error ? */
+		}
+		parent = parent->bus->self;
+	}
+	/* Setup reverse map */
+	for (rid = pe->rid; rid < rid_end; rid++)
+		phb->ioda.pe_rmap[rid] = pe->pe_number;
+
+	/* Setup one MVTs on IODA1 */
+	if (phb->type == PNV_PHB_IODA1) {
+		pe->mve_number = pe->pe_number;
+		rc = opal_pci_set_mve(phb->opal_id, pe->mve_number,
+				      pe->pe_number);
+		if (rc) {
+			pe_err(pe, "OPAL error %ld setting up MVE %d\n",
+			       rc, pe->mve_number);
+			pe->mve_number = -1;
+		} else {
+			rc = opal_pci_set_mve_enable(phb->opal_id,
+						     pe->mve_number, OPAL_ENABLE_MVE);
+			if (rc) {
+				pe_err(pe, "OPAL error %ld enabling MVE %d\n",
+				       rc, pe->mve_number);
+				pe->mve_number = -1;
+			}
+		}
+	} else if (phb->type == PNV_PHB_IODA2)
+		pe->mve_number = 0;
+
+	return 0;
+}
+
+static void __devinit pnv_ioda_link_pe_by_weight(struct pnv_phb *phb,
+						 struct pnv_ioda_pe *pe)
+{
+	struct pnv_ioda_pe *lpe;
+
+	list_for_each_entry(lpe, &phb->ioda.pe_list, link) {
+		if (lpe->dma_weight < pe->dma_weight) {
+			list_add_tail(&pe->link, &lpe->link);
+			return;
+		}
+	}
+	list_add_tail(&pe->link, &phb->ioda.pe_list);
+}
+
+static unsigned int pnv_ioda_dma_weight(struct pci_dev *dev)
+{
+	/* This is quite simplistic. The "base" weight of a device
+	 * is 10. 0 means no DMA is to be accounted for it.
+	 */
+
+	/* If it's a bridge, no DMA */
+	if (dev->hdr_type != PCI_HEADER_TYPE_NORMAL)
+		return 0;
+
+	/* Reduce the weight of slow USB controllers */
+	if (dev->class == PCI_CLASS_SERIAL_USB_UHCI ||
+	    dev->class == PCI_CLASS_SERIAL_USB_OHCI ||
+	    dev->class == PCI_CLASS_SERIAL_USB_EHCI)
+		return 3;
+
+	/* Increase the weight of RAID (includes Obsidian) */
+	if ((dev->class >> 8) == PCI_CLASS_STORAGE_RAID)
+		return 15;
+
+	/* Default */
+	return 10;
+}
+
+static struct pnv_ioda_pe * __devinit pnv_ioda_setup_dev_PE(struct pci_dev *dev)
+{
+	struct pci_controller *hose = pci_bus_to_host(dev->bus);
+	struct pnv_phb *phb = hose->private_data;
+	struct pci_dn *pdn = pnv_ioda_get_pdn(dev);
+	struct pnv_ioda_pe *pe;
+	int pe_num;
+
+	if (!pdn) {
+		pr_err("%s: Device tree node not associated properly\n",
+			   pci_name(dev));
+		return NULL;
+	}
+	if (pdn->pe_number != IODA_INVALID_PE)
+		return NULL;
+
+	/* PE#0 has been pre-set */
+	if (dev->bus->number == 0)
+		pe_num = 0;
+	else
+		pe_num = pnv_ioda_alloc_pe(phb);
+	if (pe_num == IODA_INVALID_PE) {
+		pr_warning("%s: Not enough PE# available, disabling device\n",
+			   pci_name(dev));
+		return NULL;
+	}
+
+	/* NOTE: We get only one ref to the pci_dev for the pdn, not for the
+	 * pointer in the PE data structure, both should be destroyed at the
+	 * same time. However, this needs to be looked at more closely again
+	 * once we actually start removing things (Hotplug, SR-IOV, ...)
+	 *
+	 * At some point we want to remove the PDN completely anyways
+	 */
+	pe = &phb->ioda.pe_array[pe_num];
+	pci_dev_get(dev);
+	pdn->pcidev = dev;
+	pdn->pe_number = pe_num;
+	pe->pdev = dev;
+	pe->pbus = NULL;
+	pe->tce32_seg = -1;
+	pe->mve_number = -1;
+	pe->rid = dev->bus->number << 8 | pdn->devfn;
+
+	pe_info(pe, "Associated device to PE\n");
+
+	if (pnv_ioda_configure_pe(phb, pe)) {
+		/* XXX What do we do here ? */
+		if (pe_num)
+			pnv_ioda_free_pe(phb, pe_num);
+		pdn->pe_number = IODA_INVALID_PE;
+		pe->pdev = NULL;
+		pci_dev_put(dev);
+		return NULL;
+	}
+
+	/* Assign a DMA weight to the device */
+	pe->dma_weight = pnv_ioda_dma_weight(dev);
+	if (pe->dma_weight != 0) {
+		phb->ioda.dma_weight += pe->dma_weight;
+		phb->ioda.dma_pe_count++;
+	}
+
+	/* Link the PE */
+	pnv_ioda_link_pe_by_weight(phb, pe);
+
+	return pe;
+}
+
+static void pnv_ioda_setup_same_PE(struct pci_bus *bus, struct pnv_ioda_pe *pe)
+{
+	struct pci_dev *dev;
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		struct pci_dn *pdn = pnv_ioda_get_pdn(dev);
+
+		if (pdn == NULL) {
+			pr_warn("%s: No device node associated with device !\n",
+				pci_name(dev));
+			continue;
+		}
+		pci_dev_get(dev);
+		pdn->pcidev = dev;
+		pdn->pe_number = pe->pe_number;
+		pe->dma_weight += pnv_ioda_dma_weight(dev);
+		if (dev->subordinate)
+			pnv_ioda_setup_same_PE(dev->subordinate, pe);
+	}
+}
+
+static void __devinit pnv_ioda_setup_bus_PE(struct pci_dev *dev,
+					    struct pnv_ioda_pe *ppe)
+{
+	struct pci_controller *hose = pci_bus_to_host(dev->bus);
+	struct pnv_phb *phb = hose->private_data;
+	struct pci_bus *bus = dev->subordinate;
+	struct pnv_ioda_pe *pe;
+	int pe_num;
+
+	if (!bus) {
+		pr_warning("%s: Bridge without a subordinate bus !\n",
+			   pci_name(dev));
+		return;
+	}
+	pe_num = pnv_ioda_alloc_pe(phb);
+	if (pe_num == IODA_INVALID_PE) {
+		pr_warning("%s: Not enough PE# available, disabling bus\n",
+			   pci_name(dev));
+		return;
+	}
+
+	pe = &phb->ioda.pe_array[pe_num];
+	ppe->bus_pe = pe;
+	pe->pbus = bus;
+	pe->pdev = NULL;
+	pe->tce32_seg = -1;
+	pe->mve_number = -1;
+	pe->rid = bus->secondary << 8;
+	pe->dma_weight = 0;
+
+	pe_info(pe, "Secondary busses %d..%d associated with PE\n",
+		bus->secondary, bus->subordinate);
+
+	if (pnv_ioda_configure_pe(phb, pe)) {
+		/* XXX What do we do here ? */
+		if (pe_num)
+			pnv_ioda_free_pe(phb, pe_num);
+		pe->pbus = NULL;
+		return;
+	}
+
+	/* Associate it with all child devices */
+	pnv_ioda_setup_same_PE(bus, pe);
+
+	/* Account for one DMA PE if at least one DMA capable device exist
+	 * below the bridge
+	 */
+	if (pe->dma_weight != 0) {
+		phb->ioda.dma_weight += pe->dma_weight;
+		phb->ioda.dma_pe_count++;
+	}
+
+	/* Link the PE */
+	pnv_ioda_link_pe_by_weight(phb, pe);
+}
+
+static void __devinit pnv_ioda_setup_PEs(struct pci_bus *bus)
+{
+	struct pci_dev *dev;
+	struct pnv_ioda_pe *pe;
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		pe = pnv_ioda_setup_dev_PE(dev);
+		if (pe == NULL)
+			continue;
+		/* Leaving the PCIe domain ... single PE# */
+		if (dev->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE)
+			pnv_ioda_setup_bus_PE(dev, pe);
+		else if (dev->subordinate)
+			pnv_ioda_setup_PEs(dev->subordinate);
+	}
+}
+
+static void __devinit pnv_pci_ioda_dma_dev_setup(struct pnv_phb *phb,
+						 struct pci_dev *dev)
+{
+	/* We delay DMA setup after we have assigned all PE# */
+}
+
+static void __devinit pnv_ioda_setup_bus_dma(struct pnv_ioda_pe *pe,
+					     struct pci_bus *bus)
+{
+	struct pci_dev *dev;
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		set_iommu_table_base(&dev->dev, &pe->tce32_table);
+		if (dev->subordinate)
+			pnv_ioda_setup_bus_dma(pe, dev->subordinate);
+	}
+}
+
+static void __devinit pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
+						struct pnv_ioda_pe *pe,
+						unsigned int base,
+						unsigned int segs)
+{
+
+	struct page *tce_mem = NULL;
+	const __be64 *swinvp;
+	struct iommu_table *tbl;
+	unsigned int i;
+	int64_t rc;
+	void *addr;
+
+	/* 256M DMA window, 4K TCE pages, 8 bytes TCE */
+#define TCE32_TABLE_SIZE	((0x10000000 / 0x1000) * 8)
+
+	/* XXX FIXME: Handle 64-bit only DMA devices */
+	/* XXX FIXME: Provide 64-bit DMA facilities & non-4K TCE tables etc.. */
+	/* XXX FIXME: Allocate multi-level tables on PHB3 */
+
+	/* We shouldn't already have a 32-bit DMA associated */
+	if (WARN_ON(pe->tce32_seg >= 0))
+		return;
+
+	/* Grab a 32-bit TCE table */
+	pe->tce32_seg = base;
+	pe_info(pe, " Setting up 32-bit TCE table at %08x..%08x\n",
+		(base << 28), ((base + segs) << 28) - 1);
+
+	/* XXX Currently, we allocate one big contiguous table for the
+	 * TCEs. We only really need one chunk per 256M of TCE space
+	 * (ie per segment) but that's an optimization for later, it
+	 * requires some added smarts with our get/put_tce implementation
+	 */
+	tce_mem = alloc_pages_node(phb->hose->node, GFP_KERNEL,
+				   get_order(TCE32_TABLE_SIZE * segs));
+	if (!tce_mem) {
+		pe_err(pe, " Failed to allocate a 32-bit TCE memory\n");
+		goto fail;
+	}
+	addr = page_address(tce_mem);
+	memset(addr, 0, TCE32_TABLE_SIZE * segs);
+
+	/* Configure HW */
+	for (i = 0; i < segs; i++) {
+		rc = opal_pci_map_pe_dma_window(phb->opal_id,
+					      pe->pe_number,
+					      base + i, 1,
+					      __pa(addr) + TCE32_TABLE_SIZE * i,
+					      TCE32_TABLE_SIZE, 0x1000);
+		if (rc) {
+			pe_err(pe, " Failed to configure 32-bit TCE table,"
+			       " err %ld\n", rc);
+			goto fail;
+		}
+	}
+
+	/* Setup linux iommu table */
+	tbl = &pe->tce32_table;
+	pnv_pci_setup_iommu_table(tbl, addr, TCE32_TABLE_SIZE * segs,
+				  base << 28);
+
+	/* OPAL variant of P7IOC SW invalidated TCEs */
+	swinvp = of_get_property(phb->hose->dn, "ibm,opal-tce-kill", NULL);
+	if (swinvp) {
+		/* We need a couple more fields -- an address and a data
+		 * to or.  Since the bus is only printed out on table free
+		 * errors, and on the first pass the data will be a relative
+		 * bus number, print that out instead.
+		 */
+		tbl->it_busno = 0;
+		tbl->it_index = (unsigned long)ioremap(be64_to_cpup(swinvp), 8);
+		tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE
+			| TCE_PCI_SWINV_PAIR;
+	}
+	iommu_init_table(tbl, phb->hose->node);
+
+	if (pe->pdev)
+		set_iommu_table_base(&pe->pdev->dev, tbl);
+	else
+		pnv_ioda_setup_bus_dma(pe, pe->pbus);
+
+	return;
+ fail:
+	/* XXX Failure: Try to fallback to 64-bit only ? */
+	if (pe->tce32_seg >= 0)
+		pe->tce32_seg = -1;
+	if (tce_mem)
+		__free_pages(tce_mem, get_order(TCE32_TABLE_SIZE * segs));
+}
+
+static void __devinit pnv_ioda_setup_dma(struct pnv_phb *phb)
+{
+	struct pci_controller *hose = phb->hose;
+	unsigned int residual, remaining, segs, tw, base;
+	struct pnv_ioda_pe *pe;
+
+	/* If we have more PE# than segments available, hand out one
+	 * per PE until we run out and let the rest fail. If not,
+	 * then we assign at least one segment per PE, plus more based
+	 * on the amount of devices under that PE
+	 */
+	if (phb->ioda.dma_pe_count > phb->ioda.tce32_count)
+		residual = 0;
+	else
+		residual = phb->ioda.tce32_count -
+			phb->ioda.dma_pe_count;
+
+	pr_info("PCI: Domain %04x has %ld available 32-bit DMA segments\n",
+		hose->global_number, phb->ioda.tce32_count);
+	pr_info("PCI: %d PE# for a total weight of %d\n",
+		phb->ioda.dma_pe_count, phb->ioda.dma_weight);
+
+	/* Walk our PE list and configure their DMA segments, hand them
+	 * out one base segment plus any residual segments based on
+	 * weight
+	 */
+	remaining = phb->ioda.tce32_count;
+	tw = phb->ioda.dma_weight;
+	base = 0;
+	list_for_each_entry(pe, &phb->ioda.pe_list, link) {
+		if (!pe->dma_weight)
+			continue;
+		if (!remaining) {
+			pe_warn(pe, "No DMA32 resources available\n");
+			continue;
+		}
+		segs = 1;
+		if (residual) {
+			segs += ((pe->dma_weight * residual)  + (tw / 2)) / tw;
+			if (segs > remaining)
+				segs = remaining;
+		}
+		pe_info(pe, "DMA weight %d, assigned %d DMA32 segments\n",
+			pe->dma_weight, segs);
+		pnv_pci_ioda_setup_dma_pe(phb, pe, base, segs);
+		remaining -= segs;
+		base += segs;
+	}
+}
+
+#ifdef CONFIG_PCI_MSI
+static int pnv_pci_ioda_msi_setup(struct pnv_phb *phb, struct pci_dev *dev,
+				  unsigned int hwirq, unsigned int is_64,
+				  struct msi_msg *msg)
+{
+	struct pnv_ioda_pe *pe = pnv_ioda_get_pe(dev);
+	unsigned int xive_num = hwirq - phb->msi_base;
+	uint64_t addr64;
+	uint32_t addr32, data;
+	int rc;
+
+	/* No PE assigned ? bail out ... no MSI for you ! */
+	if (pe == NULL)
+		return -ENXIO;
+
+	/* Check if we have an MVE */
+	if (pe->mve_number < 0)
+		return -ENXIO;
+
+	/* Assign XIVE to PE */
+	rc = opal_pci_set_xive_pe(phb->opal_id, pe->pe_number, xive_num);
+	if (rc) {
+		pr_warn("%s: OPAL error %d setting XIVE %d PE\n",
+			pci_name(dev), rc, xive_num);
+		return -EIO;
+	}
+
+	if (is_64) {
+		rc = opal_get_msi_64(phb->opal_id, pe->mve_number, xive_num, 1,
+				     &addr64, &data);
+		if (rc) {
+			pr_warn("%s: OPAL error %d getting 64-bit MSI data\n",
+				pci_name(dev), rc);
+			return -EIO;
+		}
+		msg->address_hi = addr64 >> 32;
+		msg->address_lo = addr64 & 0xfffffffful;
+	} else {
+		rc = opal_get_msi_32(phb->opal_id, pe->mve_number, xive_num, 1,
+				     &addr32, &data);
+		if (rc) {
+			pr_warn("%s: OPAL error %d getting 32-bit MSI data\n",
+				pci_name(dev), rc);
+			return -EIO;
+		}
+		msg->address_hi = 0;
+		msg->address_lo = addr32;
+	}
+	msg->data = data;
+
+	pr_devel("%s: %s-bit MSI on hwirq %x (xive #%d),"
+		 " address=%x_%08x data=%x PE# %d\n",
+		 pci_name(dev), is_64 ? "64" : "32", hwirq, xive_num,
+		 msg->address_hi, msg->address_lo, data, pe->pe_number);
+
+	return 0;
+}
+
+static void pnv_pci_init_ioda_msis(struct pnv_phb *phb)
+{
+	unsigned int bmap_size;
+	const __be32 *prop = of_get_property(phb->hose->dn,
+					     "ibm,opal-msi-ranges", NULL);
+	if (!prop) {
+		/* BML Fallback */
+		prop = of_get_property(phb->hose->dn, "msi-ranges", NULL);
+	}
+	if (!prop)
+		return;
+
+	phb->msi_base = be32_to_cpup(prop);
+	phb->msi_count = be32_to_cpup(prop + 1);
+	bmap_size = BITS_TO_LONGS(phb->msi_count) * sizeof(unsigned long);
+	phb->msi_map = zalloc_maybe_bootmem(bmap_size, GFP_KERNEL);
+	if (!phb->msi_map) {
+		pr_err("PCI %d: Failed to allocate MSI bitmap !\n",
+		       phb->hose->global_number);
+		return;
+	}
+	phb->msi_setup = pnv_pci_ioda_msi_setup;
+	phb->msi32_support = 1;
+	pr_info("  Allocated bitmap for %d MSIs (base IRQ 0x%x)\n",
+		phb->msi_count, phb->msi_base);
+}
+#else
+static void pnv_pci_init_ioda_msis(struct pnv_phb *phb) { }
+#endif /* CONFIG_PCI_MSI */
+
+/* This is the starting point of our IODA specific resource
+ * allocation process
+ */
+static void __devinit pnv_pci_ioda_fixup_phb(struct pci_controller *hose)
+{
+	resource_size_t size, align;
+	struct pci_bus *child;
+
+	/* Associate PEs per functions */
+	pnv_ioda_setup_PEs(hose->bus);
+
+	/* Calculate all resources */
+	pnv_ioda_calc_bus(hose->bus, IORESOURCE_IO, &size, &align);
+	pnv_ioda_calc_bus(hose->bus, IORESOURCE_MEM, &size, &align);
+
+	/* Apply then to HW */
+	pnv_ioda_update_resources(hose->bus);
+
+	/* Setup DMA */
+	pnv_ioda_setup_dma(hose->private_data);
+
+	/* Configure PCI Express settings */
+	list_for_each_entry(child, &hose->bus->children, node) {
+		struct pci_dev *self = child->self;
+		if (!self)
+			continue;
+		pcie_bus_configure_settings(child, self->pcie_mpss);
+	}
+}
+
+/* Prevent enabling devices for which we couldn't properly
+ * assign a PE
+ */
+static int __devinit pnv_pci_enable_device_hook(struct pci_dev *dev)
+{
+	struct pci_dn *pdn = pnv_ioda_get_pdn(dev);
+
+	if (!pdn || pdn->pe_number == IODA_INVALID_PE)
+		return -EINVAL;
+	return 0;
+}
+
+static u32 pnv_ioda_bdfn_to_pe(struct pnv_phb *phb, struct pci_bus *bus,
+			       u32 devfn)
+{
+	return phb->ioda.pe_rmap[(bus->number << 8) | devfn];
+}
+
+void __init pnv_pci_init_ioda1_phb(struct device_node *np)
+{
+	struct pci_controller *hose;
+	static int primary = 1;
+	struct pnv_phb *phb;
+	unsigned long size, m32map_off, iomap_off, pemap_off;
+	const u64 *prop64;
+	u64 phb_id;
+	void *aux;
+	long rc;
+
+	pr_info(" Initializing IODA OPAL PHB %s\n", np->full_name);
+
+	prop64 = of_get_property(np, "ibm,opal-phbid", NULL);
+	if (!prop64) {
+		pr_err("  Missing \"ibm,opal-phbid\" property !\n");
+		return;
+	}
+	phb_id = be64_to_cpup(prop64);
+	pr_debug("  PHB-ID  : 0x%016llx\n", phb_id);
+
+	phb = alloc_bootmem(sizeof(struct pnv_phb));
+	if (phb) {
+		memset(phb, 0, sizeof(struct pnv_phb));
+		phb->hose = hose = pcibios_alloc_controller(np);
+	}
+	if (!phb || !phb->hose) {
+		pr_err("PCI: Failed to allocate PCI controller for %s\n",
+		       np->full_name);
+		return;
+	}
+
+	spin_lock_init(&phb->lock);
+	/* XXX Use device-tree */
+	hose->first_busno = 0;
+	hose->last_busno = 0xff;
+	hose->private_data = phb;
+	phb->opal_id = phb_id;
+	phb->type = PNV_PHB_IODA1;
+
+	/* Detect specific models for error handling */
+	if (of_device_is_compatible(np, "ibm,p7ioc-pciex"))
+		phb->model = PNV_PHB_MODEL_P7IOC;
+	else
+		phb->model = PNV_PHB_MODEL_UNKNOWN;
+
+	/* We parse "ranges" now since we need to deduce the register base
+	 * from the IO base
+	 */
+	pci_process_bridge_OF_ranges(phb->hose, np, primary);
+	primary = 0;
+
+	/* Magic formula from Milton */
+	phb->regs = of_iomap(np, 0);
+	if (phb->regs == NULL)
+		pr_err("  Failed to map registers !\n");
+
+
+	/* XXX This is hack-a-thon. This needs to be changed so that:
+	 *  - we obtain stuff like PE# etc... from device-tree
+	 *  - we properly re-allocate M32 ourselves
+	 *    (the OFW one isn't very good)
+	 */
+
+	/* Initialize more IODA stuff */
+	phb->ioda.total_pe = 128;
+
+	phb->ioda.m32_size = resource_size(&hose->mem_resources[0]);
+	/* OFW Has already off top 64k of M32 space (MSI space) */
+	phb->ioda.m32_size += 0x10000;
+
+	phb->ioda.m32_segsize = phb->ioda.m32_size / phb->ioda.total_pe;
+	phb->ioda.m32_pci_base = hose->mem_resources[0].start -
+		hose->pci_mem_offset;
+	phb->ioda.io_size = hose->pci_io_size;
+	phb->ioda.io_segsize = phb->ioda.io_size / phb->ioda.total_pe;
+	phb->ioda.io_pci_base = 0; /* XXX calculate this ? */
+
+	/* Allocate aux data & arrays */
+	size = _ALIGN_UP(phb->ioda.total_pe / 8, sizeof(unsigned long));
+	m32map_off = size;
+	size += phb->ioda.total_pe;
+	iomap_off = size;
+	size += phb->ioda.total_pe;
+	pemap_off = size;
+	size += phb->ioda.total_pe * sizeof(struct pnv_ioda_pe);
+	aux = alloc_bootmem(size);
+	memset(aux, 0, size);
+	phb->ioda.pe_alloc = aux;
+	phb->ioda.m32_segmap = aux + m32map_off;
+	phb->ioda.io_segmap = aux + iomap_off;
+	phb->ioda.pe_array = aux + pemap_off;
+	set_bit(0, phb->ioda.pe_alloc);
+
+	INIT_LIST_HEAD(&phb->ioda.pe_list);
+
+	/* Calculate how many 32-bit TCE segments we have */
+	phb->ioda.tce32_count = phb->ioda.m32_pci_base >> 28;
+
+	/* Clear unusable m64 */
+	hose->mem_resources[1].flags = 0;
+	hose->mem_resources[1].start = 0;
+	hose->mem_resources[1].end = 0;
+	hose->mem_resources[2].flags = 0;
+	hose->mem_resources[2].start = 0;
+	hose->mem_resources[2].end = 0;
+
+#if 0
+	rc = opal_pci_set_phb_mem_window(opal->phb_id,
+					 window_type,
+					 window_num,
+					 starting_real_address,
+					 starting_pci_address,
+					 segment_size);
+#endif
+
+	pr_info("  %d PE's M32: 0x%x [segment=0x%x] IO: 0x%x [segment=0x%x]\n",
+		phb->ioda.total_pe,
+		phb->ioda.m32_size, phb->ioda.m32_segsize,
+		phb->ioda.io_size, phb->ioda.io_segsize);
+
+	if (phb->regs)  {
+		pr_devel(" BUID     = 0x%016llx\n", in_be64(phb->regs + 0x100));
+		pr_devel(" PHB2_CR  = 0x%016llx\n", in_be64(phb->regs + 0x160));
+		pr_devel(" IO_BAR   = 0x%016llx\n", in_be64(phb->regs + 0x170));
+		pr_devel(" IO_BAMR  = 0x%016llx\n", in_be64(phb->regs + 0x178));
+		pr_devel(" IO_SAR   = 0x%016llx\n", in_be64(phb->regs + 0x180));
+		pr_devel(" M32_BAR  = 0x%016llx\n", in_be64(phb->regs + 0x190));
+		pr_devel(" M32_BAMR = 0x%016llx\n", in_be64(phb->regs + 0x198));
+		pr_devel(" M32_SAR  = 0x%016llx\n", in_be64(phb->regs + 0x1a0));
+	}
+	phb->hose->ops = &pnv_pci_ops;
+
+	/* Setup RID -> PE mapping function */
+	phb->bdfn_to_pe = pnv_ioda_bdfn_to_pe;
+
+	/* Setup TCEs */
+	phb->dma_dev_setup = pnv_pci_ioda_dma_dev_setup;
+
+	/* Setup MSI support */
+	pnv_pci_init_ioda_msis(phb);
+
+	/* We set both probe_only and PCI_REASSIGN_ALL_RSRC. This is an
+	 * odd combination which essentially means that we skip all resource
+	 * fixups and assignments in the generic code, and do it all
+	 * ourselves here
+	 */
+	pci_probe_only = 1;
+	ppc_md.pcibios_fixup_phb = pnv_pci_ioda_fixup_phb;
+	ppc_md.pcibios_enable_device_hook = pnv_pci_enable_device_hook;
+	pci_add_flags(PCI_REASSIGN_ALL_RSRC);
+
+	/* Reset IODA tables to a clean state */
+	rc = opal_pci_reset(phb_id, OPAL_PCI_IODA_TABLE_RESET, OPAL_ASSERT_RESET);
+	if (rc)
+		pr_warning("  OPAL Error %ld performing IODA table reset !\n", rc);
+	opal_pci_set_pe(phb_id, 0, 0, 7, 1, 1 , OPAL_MAP_PE);
+}
+
+void __init pnv_pci_init_ioda_hub(struct device_node *np)
+{
+	struct device_node *phbn;
+	const u64 *prop64;
+	u64 hub_id;
+
+	pr_info("Probing IODA IO-Hub %s\n", np->full_name);
+
+	prop64 = of_get_property(np, "ibm,opal-hubid", NULL);
+	if (!prop64) {
+		pr_err(" Missing \"ibm,opal-hubid\" property !\n");
+		return;
+	}
+	hub_id = be64_to_cpup(prop64);
+	pr_devel(" HUB-ID : 0x%016llx\n", hub_id);
+
+	/* Count child PHBs */
+	for_each_child_of_node(np, phbn) {
+		/* Look for IODA1 PHBs */
+		if (of_device_is_compatible(phbn, "ibm,ioda-phb"))
+			pnv_pci_init_ioda1_phb(phbn);
+	}
+}
diff --git a/arch/powerpc/platforms/powernv/pci-p5ioc2.c b/arch/powerpc/platforms/powernv/pci-p5ioc2.c
index 4c80f7c..2649677 100644
--- a/arch/powerpc/platforms/powernv/pci-p5ioc2.c
+++ b/arch/powerpc/platforms/powernv/pci-p5ioc2.c
@@ -137,6 +137,7 @@ static void __init pnv_pci_init_p5ioc2_phb(struct device_node *np,
 	phb->hose->private_data = phb;
 	phb->opal_id = phb_id;
 	phb->type = PNV_PHB_P5IOC2;
+	phb->model = PNV_PHB_MODEL_P5IOC2;
 
 	phb->regs = of_iomap(np, 0);
 
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index 85bb66d..a70bc1e 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -144,6 +144,112 @@ static void pnv_teardown_msi_irqs(struct pci_dev *pdev)
 }
 #endif /* CONFIG_PCI_MSI */
 
+static void pnv_pci_dump_p7ioc_diag_data(struct pnv_phb *phb)
+{
+	struct OpalIoP7IOCPhbErrorData *data = &phb->diag.p7ioc;
+	int i;
+
+	pr_info("PHB %d diagnostic data:\n", phb->hose->global_number);
+
+	pr_info("  brdgCtl              = 0x%08x\n", data->brdgCtl);
+
+	pr_info("  portStatusReg        = 0x%08x\n", data->portStatusReg);
+	pr_info("  rootCmplxStatus      = 0x%08x\n", data->rootCmplxStatus);
+	pr_info("  busAgentStatus       = 0x%08x\n", data->busAgentStatus);
+
+	pr_info("  deviceStatus         = 0x%08x\n", data->deviceStatus);
+	pr_info("  slotStatus           = 0x%08x\n", data->slotStatus);
+	pr_info("  linkStatus           = 0x%08x\n", data->linkStatus);
+	pr_info("  devCmdStatus         = 0x%08x\n", data->devCmdStatus);
+	pr_info("  devSecStatus         = 0x%08x\n", data->devSecStatus);
+
+	pr_info("  rootErrorStatus      = 0x%08x\n", data->rootErrorStatus);
+	pr_info("  uncorrErrorStatus    = 0x%08x\n", data->uncorrErrorStatus);
+	pr_info("  corrErrorStatus      = 0x%08x\n", data->corrErrorStatus);
+	pr_info("  tlpHdr1              = 0x%08x\n", data->tlpHdr1);
+	pr_info("  tlpHdr2              = 0x%08x\n", data->tlpHdr2);
+	pr_info("  tlpHdr3              = 0x%08x\n", data->tlpHdr3);
+	pr_info("  tlpHdr4              = 0x%08x\n", data->tlpHdr4);
+	pr_info("  sourceId             = 0x%08x\n", data->sourceId);
+
+	pr_info("  errorClass           = 0x%016llx\n", data->errorClass);
+	pr_info("  correlator           = 0x%016llx\n", data->correlator);
+
+	pr_info("  p7iocPlssr           = 0x%016llx\n", data->p7iocPlssr);
+	pr_info("  p7iocCsr             = 0x%016llx\n", data->p7iocCsr);
+	pr_info("  lemFir               = 0x%016llx\n", data->lemFir);
+	pr_info("  lemErrorMask         = 0x%016llx\n", data->lemErrorMask);
+	pr_info("  lemWOF               = 0x%016llx\n", data->lemWOF);
+	pr_info("  phbErrorStatus       = 0x%016llx\n", data->phbErrorStatus);
+	pr_info("  phbFirstErrorStatus  = 0x%016llx\n", data->phbFirstErrorStatus);
+	pr_info("  phbErrorLog0         = 0x%016llx\n", data->phbErrorLog0);
+	pr_info("  phbErrorLog1         = 0x%016llx\n", data->phbErrorLog1);
+	pr_info("  mmioErrorStatus      = 0x%016llx\n", data->mmioErrorStatus);
+	pr_info("  mmioFirstErrorStatus = 0x%016llx\n", data->mmioFirstErrorStatus);
+	pr_info("  mmioErrorLog0        = 0x%016llx\n", data->mmioErrorLog0);
+	pr_info("  mmioErrorLog1        = 0x%016llx\n", data->mmioErrorLog1);
+	pr_info("  dma0ErrorStatus      = 0x%016llx\n", data->dma0ErrorStatus);
+	pr_info("  dma0FirstErrorStatus = 0x%016llx\n", data->dma0FirstErrorStatus);
+	pr_info("  dma0ErrorLog0        = 0x%016llx\n", data->dma0ErrorLog0);
+	pr_info("  dma0ErrorLog1        = 0x%016llx\n", data->dma0ErrorLog1);
+	pr_info("  dma1ErrorStatus      = 0x%016llx\n", data->dma1ErrorStatus);
+	pr_info("  dma1FirstErrorStatus = 0x%016llx\n", data->dma1FirstErrorStatus);
+	pr_info("  dma1ErrorLog0        = 0x%016llx\n", data->dma1ErrorLog0);
+	pr_info("  dma1ErrorLog1        = 0x%016llx\n", data->dma1ErrorLog1);
+
+	for (i = 0; i < OPAL_P7IOC_NUM_PEST_REGS; i++) {
+		if ((data->pestA[i] >> 63) == 0 &&
+		    (data->pestB[i] >> 63) == 0)
+			continue;
+		pr_info("  PE[%3d] PESTA        = 0x%016llx\n", i, data->pestA[i]);
+		pr_info("          PESTB        = 0x%016llx\n", data->pestB[i]);
+	}
+}
+
+static void pnv_pci_dump_phb_diag_data(struct pnv_phb *phb)
+{
+	switch(phb->model) {
+	case PNV_PHB_MODEL_P7IOC:
+		pnv_pci_dump_p7ioc_diag_data(phb);
+		break;
+	default:
+		pr_warning("PCI %d: Can't decode this PHB diag data\n",
+			   phb->hose->global_number);
+	}
+}
+
+static void pnv_pci_handle_eeh_config(struct pnv_phb *phb, u32 pe_no)
+{
+	unsigned long flags, rc;
+	int has_diag;
+
+	spin_lock_irqsave(&phb->lock, flags);
+
+	rc = opal_pci_get_phb_diag_data(phb->opal_id, phb->diag.blob, PNV_PCI_DIAG_BUF_SIZE);
+	has_diag = (rc == OPAL_SUCCESS);
+
+	rc = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no,
+				       OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
+	if (rc) {
+		pr_warning("PCI %d: Failed to clear EEH freeze state"
+			   " for PE#%d, err %ld\n",
+			   phb->hose->global_number, pe_no, rc);
+
+		/* For now, let's only display the diag buffer when we fail to clear
+		 * the EEH status. We'll do more sensible things later when we have
+		 * proper EEH support. We need to make sure we don't pollute ourselves
+		 * with the normal errors generated when probing empty slots
+		 */
+		if (has_diag)
+			pnv_pci_dump_phb_diag_data(phb);
+		else
+			pr_warning("PCI %d: No diag data available\n",
+				   phb->hose->global_number);
+	}
+
+	spin_unlock_irqrestore(&phb->lock, flags);
+}
+
 static void pnv_pci_config_check_eeh(struct pnv_phb *phb, struct pci_bus *bus,
 				     u32 bdfn)
 {
@@ -165,15 +271,8 @@ static void pnv_pci_config_check_eeh(struct pnv_phb *phb, struct pci_bus *bus,
 	}
 	cfg_dbg(" -> EEH check, bdfn=%04x PE%d fstate=%x\n",
 		bdfn, pe_no, fstate);
-	if (fstate != 0) {
-		rc = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no,
-					      OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
-		if (rc) {
-			pr_warning("PCI %d: Failed to clear EEH freeze state"
-				   " for PE#%d, err %lld\n",
-				   phb->hose->global_number, pe_no, rc);
-		}
-	}
+	if (fstate != 0)
+		pnv_pci_handle_eeh_config(phb, pe_no);
 }
 
 static int pnv_pci_read_config(struct pci_bus *bus,
@@ -257,12 +356,54 @@ struct pci_ops pnv_pci_ops = {
 	.write = pnv_pci_write_config,
 };
 
+
+static void pnv_tce_invalidate(struct iommu_table *tbl,
+			       u64 *startp, u64 *endp)
+{
+	u64 __iomem *invalidate = (u64 __iomem *)tbl->it_index;
+	unsigned long start, end, inc;
+
+	start = __pa(startp);
+	end = __pa(endp);
+
+
+	/* BML uses this case for p6/p7/galaxy2: Shift addr and put in node */
+	if (tbl->it_busno) {
+		start <<= 12;
+		end <<= 12;
+		inc = 128 << 12;
+		start |= tbl->it_busno;
+		end |= tbl->it_busno;
+	}
+	/* p7ioc-style invalidation, 2 TCEs per write */
+	else if (tbl->it_type & TCE_PCI_SWINV_PAIR) {
+		start |= (1ull << 63);
+		end |= (1ull << 63);
+		inc = 16;
+	}
+	/* Default (older HW) */
+	else
+		inc = 128;
+
+	end |= inc - 1;		/* round up end to be different than start */
+
+	mb(); /* Ensure above stores are visible */
+	while (start <= end) {
+		__raw_writeq(start, invalidate);
+		start += inc;
+	}
+	/* The iommu layer will do another mb() for us on build() and
+	 * we don't care on free()
+	 */
+}
+
+
 static int pnv_tce_build(struct iommu_table *tbl, long index, long npages,
 			 unsigned long uaddr, enum dma_data_direction direction,
 			 struct dma_attrs *attrs)
 {
 	u64 proto_tce;
-	u64 *tcep;
+	u64 *tcep, *tces;
 	u64 rpn;
 
 	proto_tce = TCE_PCI_READ; // Read allowed
@@ -270,25 +411,33 @@ static int pnv_tce_build(struct iommu_table *tbl, long index, long npages,
 	if (direction != DMA_TO_DEVICE)
 		proto_tce |= TCE_PCI_WRITE;
 
-	tcep = ((u64 *)tbl->it_base) + index;
+	tces = tcep = ((u64 *)tbl->it_base) + index - tbl->it_offset;
+	rpn = __pa(uaddr) >> TCE_SHIFT;
 
-	while (npages--) {
-		/* can't move this out since we might cross LMB boundary */
-		rpn = (virt_to_abs(uaddr)) >> TCE_SHIFT;
-		*tcep = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT;
+	while (npages--)
+		*(tcep++) = proto_tce | (rpn++ << TCE_RPN_SHIFT);
+
+	/* Some implementations won't cache invalid TCEs and thus may not
+	 * need that flush. We'll probably turn it_type into a bit mask
+	 * of flags if that becomes the case
+	 */
+	if (tbl->it_type & TCE_PCI_SWINV_CREATE)
+		pnv_tce_invalidate(tbl, tces, tcep - 1);
 
-		uaddr += TCE_PAGE_SIZE;
-		tcep++;
-	}
 	return 0;
 }
 
 static void pnv_tce_free(struct iommu_table *tbl, long index, long npages)
 {
-	u64 *tcep = ((u64 *)tbl->it_base) + index;
+	u64 *tcep, *tces;
+
+	tces = tcep = ((u64 *)tbl->it_base) + index - tbl->it_offset;
 
 	while (npages--)
 		*(tcep++) = 0;
+
+	if (tbl->it_type & TCE_PCI_SWINV_FREE)
+		pnv_tce_invalidate(tbl, tces, tcep - 1);
 }
 
 void pnv_pci_setup_iommu_table(struct iommu_table *tbl,
@@ -308,13 +457,14 @@ static struct iommu_table * __devinit
 pnv_pci_setup_bml_iommu(struct pci_controller *hose)
 {
 	struct iommu_table *tbl;
-	const __be64 *basep;
+	const __be64 *basep, *swinvp;
 	const __be32 *sizep;
 
 	basep = of_get_property(hose->dn, "linux,tce-base", NULL);
 	sizep = of_get_property(hose->dn, "linux,tce-size", NULL);
 	if (basep == NULL || sizep == NULL) {
-		pr_err("PCI: %s has missing tce entries !\n", hose->dn->full_name);
+		pr_err("PCI: %s has missing tce entries !\n",
+		       hose->dn->full_name);
 		return NULL;
 	}
 	tbl = kzalloc_node(sizeof(struct iommu_table), GFP_KERNEL, hose->node);
@@ -323,6 +473,15 @@ pnv_pci_setup_bml_iommu(struct pci_controller *hose)
 	pnv_pci_setup_iommu_table(tbl, __va(be64_to_cpup(basep)),
 				  be32_to_cpup(sizep), 0);
 	iommu_init_table(tbl, hose->node);
+
+	/* Deal with SW invalidated TCEs when needed (BML way) */
+	swinvp = of_get_property(hose->dn, "linux,tce-sw-invalidate-info",
+				 NULL);
+	if (swinvp) {
+		tbl->it_busno = swinvp[1];
+		tbl->it_index = (unsigned long)ioremap(swinvp[0], 8);
+		tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE;
+	}
 	return tbl;
 }
 
@@ -356,6 +515,13 @@ static void __devinit pnv_pci_dma_dev_setup(struct pci_dev *pdev)
 		pnv_pci_dma_fallback_setup(hose, pdev);
 }
 
+/* Fixup wrong class code in p7ioc root complex */
+static void __devinit pnv_p7ioc_rc_quirk(struct pci_dev *dev)
+{
+	dev->class = PCI_CLASS_BRIDGE_PCI << 8;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_IBM, 0x3b9, pnv_p7ioc_rc_quirk);
+
 static int pnv_pci_probe_mode(struct pci_bus *bus)
 {
 	struct pci_controller *hose = pci_bus_to_host(bus);
@@ -400,12 +566,24 @@ void __init pnv_pci_init(void)
 		init_pci_config_tokens();
 		find_and_init_phbs();
 #endif /* CONFIG_PPC_POWERNV_RTAS */
-	} else {
-		/* OPAL is here, do our normal stuff */
+	}
+	/* OPAL is here, do our normal stuff */
+	else {
+		int found_ioda = 0;
+
+		/* Look for IODA IO-Hubs. We don't support mixing IODA
+		 * and p5ioc2 due to the need to change some global
+		 * probing flags
+		 */
+		for_each_compatible_node(np, NULL, "ibm,ioda-hub") {
+			pnv_pci_init_ioda_hub(np);
+			found_ioda = 1;
+		}
 
 		/* Look for p5ioc2 IO-Hubs */
-		for_each_compatible_node(np, NULL, "ibm,p5ioc2")
-			pnv_pci_init_p5ioc2_hub(np);
+		if (!found_ioda)
+			for_each_compatible_node(np, NULL, "ibm,p5ioc2")
+				pnv_pci_init_p5ioc2_hub(np);
 	}
 
 	/* Setup the linkage between OF nodes and PHBs */
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index d4dbc49..8bc4796 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -9,9 +9,63 @@ enum pnv_phb_type {
 	PNV_PHB_IODA2,
 };
 
+/* Precise PHB model for error management */
+enum pnv_phb_model {
+	PNV_PHB_MODEL_UNKNOWN,
+	PNV_PHB_MODEL_P5IOC2,
+	PNV_PHB_MODEL_P7IOC,
+};
+
+#define PNV_PCI_DIAG_BUF_SIZE	4096
+
+/* Data associated with a PE, including IOMMU tracking etc.. */
+struct pnv_ioda_pe {
+	/* A PE can be associated with a single device or an
+	 * entire bus (& children). In the former case, pdev
+	 * is populated, in the later case, pbus is.
+	 */
+	struct pci_dev		*pdev;
+	struct pci_bus		*pbus;
+
+	/* Effective RID (device RID for a device PE and base bus
+	 * RID with devfn 0 for a bus PE)
+	 */
+	unsigned int		rid;
+
+	/* PE number */
+	unsigned int		pe_number;
+
+	/* "Weight" assigned to the PE for the sake of DMA resource
+	 * allocations
+	 */
+	unsigned int		dma_weight;
+
+	/* This is a PCI-E -> PCI-X bridge, this points to the
+	 * corresponding bus PE
+	 */
+	struct pnv_ioda_pe	*bus_pe;
+
+	/* "Base" iommu table, ie, 4K TCEs, 32-bit DMA */
+	int			tce32_seg;
+	int			tce32_segcount;
+	struct iommu_table	tce32_table;
+
+	/* XXX TODO: Add support for additional 64-bit iommus */
+
+	/* MSIs. MVE index is identical for for 32 and 64 bit MSI
+	 * and -1 if not supported. (It's actually identical to the
+	 * PE number)
+	 */
+	int			mve_number;
+
+	/* Link in list of PE#s */
+	struct list_head	link;
+};
+
 struct pnv_phb {
 	struct pci_controller	*hose;
 	enum pnv_phb_type	type;
+	enum pnv_phb_model	model;
 	u64			opal_id;
 	void __iomem		*regs;
 	spinlock_t		lock;
@@ -34,7 +88,52 @@ struct pnv_phb {
 		struct {
 			struct iommu_table iommu_table;
 		} p5ioc2;
+
+		struct {
+			/* Global bridge info */
+			unsigned int		total_pe;
+			unsigned int		m32_size;
+			unsigned int		m32_segsize;
+			unsigned int		m32_pci_base;
+			unsigned int		io_size;
+			unsigned int		io_segsize;
+			unsigned int		io_pci_base;
+
+			/* PE allocation bitmap */
+			unsigned long		*pe_alloc;
+
+			/* M32 & IO segment maps */
+			unsigned int		*m32_segmap;
+			unsigned int		*io_segmap;
+			struct pnv_ioda_pe	*pe_array;
+
+			/* Reverse map of PEs, will have to extend if
+			 * we are to support more than 256 PEs, indexed
+			 * bus { bus, devfn }
+			 */
+			unsigned char		pe_rmap[0x10000];
+
+			/* 32-bit TCE tables allocation */
+			unsigned long		tce32_count;
+
+			/* Total "weight" for the sake of DMA resources
+			 * allocation
+			 */
+			unsigned int		dma_weight;
+			unsigned int		dma_pe_count;
+
+			/* Sorted list of used PE's, sorted at
+			 * boot for resource allocation purposes
+			 */
+			struct list_head	pe_list;
+		} ioda;
 	};
+
+	/* PHB status structure */
+	union {
+		unsigned char			blob[PNV_PCI_DIAG_BUF_SIZE];
+		struct OpalIoP7IOCPhbErrorData	p7ioc;
+	} diag;
 };
 
 extern struct pci_ops pnv_pci_ops;
@@ -43,6 +142,7 @@ extern void pnv_pci_setup_iommu_table(struct iommu_table *tbl,
 				      void *tce_mem, u64 tce_size,
 				      u64 dma_offset);
 extern void pnv_pci_init_p5ioc2_hub(struct device_node *np);
+extern void pnv_pci_init_ioda_hub(struct device_node *np);
 
 
 #endif /* __POWERNV_PCI_H */
diff --git a/arch/powerpc/platforms/powernv/smp.c b/arch/powerpc/platforms/powernv/smp.c
index e877366..17210c5 100644
--- a/arch/powerpc/platforms/powernv/smp.c
+++ b/arch/powerpc/platforms/powernv/smp.c
@@ -75,7 +75,7 @@ int __devinit pnv_smp_kick_cpu(int nr)
 	/* On OPAL v2 the CPU are still spinning inside OPAL itself,
 	 * get them back now
 	 */
-	if (firmware_has_feature(FW_FEATURE_OPALv2)) {
+	if (!paca[nr].cpu_start && firmware_has_feature(FW_FEATURE_OPALv2)) {
 		pr_devel("OPAL: Starting CPU %d (HW 0x%x)...\n", nr, pcpu);
 		rc = opal_start_cpu(pcpu, start_here);
 		if (rc != OPAL_SUCCESS)
diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c
index 1d6f4f4..617efa1 100644
--- a/arch/powerpc/platforms/ps3/interrupt.c
+++ b/arch/powerpc/platforms/ps3/interrupt.c
@@ -31,18 +31,18 @@
 
 #if defined(DEBUG)
 #define DBG udbg_printf
+#define FAIL udbg_printf
 #else
-#define DBG pr_debug
+#define DBG pr_devel
+#define FAIL pr_debug
 #endif
 
 /**
  * struct ps3_bmp - a per cpu irq status and mask bitmap structure
  * @status: 256 bit status bitmap indexed by plug
- * @unused_1:
+ * @unused_1: Alignment
  * @mask: 256 bit mask bitmap indexed by plug
- * @unused_2:
- * @lock:
- * @ipi_debug_brk_mask:
+ * @unused_2: Alignment
  *
  * The HV maintains per SMT thread mappings of HV outlet to HV plug on
  * behalf of the guest.  These mappings are implemented as 256 bit guest
@@ -73,21 +73,24 @@ struct ps3_bmp {
 		unsigned long mask;
 		u64 unused_2[3];
 	};
-	u64 ipi_debug_brk_mask;
-	spinlock_t lock;
 };
 
 /**
  * struct ps3_private - a per cpu data structure
  * @bmp: ps3_bmp structure
+ * @bmp_lock: Syncronize access to bmp.
+ * @ipi_debug_brk_mask: Mask for debug break IPIs
  * @ppe_id: HV logical_ppe_id
  * @thread_id: HV thread_id
+ * @ipi_mask: Mask of IPI virqs
  */
 
 struct ps3_private {
 	struct ps3_bmp bmp __attribute__ ((aligned (PS3_BMP_MINALIGN)));
+	spinlock_t bmp_lock;
 	u64 ppe_id;
 	u64 thread_id;
+	unsigned long ipi_debug_brk_mask;
 	unsigned long ipi_mask;
 };
 
@@ -105,7 +108,7 @@ static void ps3_chip_mask(struct irq_data *d)
 	struct ps3_private *pd = irq_data_get_irq_chip_data(d);
 	unsigned long flags;
 
-	pr_debug("%s:%d: thread_id %llu, virq %d\n", __func__, __LINE__,
+	DBG("%s:%d: thread_id %llu, virq %d\n", __func__, __LINE__,
 		pd->thread_id, d->irq);
 
 	local_irq_save(flags);
@@ -126,7 +129,7 @@ static void ps3_chip_unmask(struct irq_data *d)
 	struct ps3_private *pd = irq_data_get_irq_chip_data(d);
 	unsigned long flags;
 
-	pr_debug("%s:%d: thread_id %llu, virq %d\n", __func__, __LINE__,
+	DBG("%s:%d: thread_id %llu, virq %d\n", __func__, __LINE__,
 		pd->thread_id, d->irq);
 
 	local_irq_save(flags);
@@ -190,19 +193,19 @@ static int ps3_virq_setup(enum ps3_cpu_binding cpu, unsigned long outlet,
 	*virq = irq_create_mapping(NULL, outlet);
 
 	if (*virq == NO_IRQ) {
-		pr_debug("%s:%d: irq_create_mapping failed: outlet %lu\n",
+		FAIL("%s:%d: irq_create_mapping failed: outlet %lu\n",
 			__func__, __LINE__, outlet);
 		result = -ENOMEM;
 		goto fail_create;
 	}
 
-	pr_debug("%s:%d: outlet %lu => cpu %u, virq %u\n", __func__, __LINE__,
+	DBG("%s:%d: outlet %lu => cpu %u, virq %u\n", __func__, __LINE__,
 		outlet, cpu, *virq);
 
 	result = irq_set_chip_data(*virq, pd);
 
 	if (result) {
-		pr_debug("%s:%d: irq_set_chip_data failed\n",
+		FAIL("%s:%d: irq_set_chip_data failed\n",
 			__func__, __LINE__);
 		goto fail_set;
 	}
@@ -228,13 +231,13 @@ static int ps3_virq_destroy(unsigned int virq)
 {
 	const struct ps3_private *pd = irq_get_chip_data(virq);
 
-	pr_debug("%s:%d: ppe_id %llu, thread_id %llu, virq %u\n", __func__,
+	DBG("%s:%d: ppe_id %llu, thread_id %llu, virq %u\n", __func__,
 		__LINE__, pd->ppe_id, pd->thread_id, virq);
 
 	irq_set_chip_data(virq, NULL);
 	irq_dispose_mapping(virq);
 
-	pr_debug("%s:%d <-\n", __func__, __LINE__);
+	DBG("%s:%d <-\n", __func__, __LINE__);
 	return 0;
 }
 
@@ -257,7 +260,7 @@ int ps3_irq_plug_setup(enum ps3_cpu_binding cpu, unsigned long outlet,
 	result = ps3_virq_setup(cpu, outlet, virq);
 
 	if (result) {
-		pr_debug("%s:%d: ps3_virq_setup failed\n", __func__, __LINE__);
+		FAIL("%s:%d: ps3_virq_setup failed\n", __func__, __LINE__);
 		goto fail_setup;
 	}
 
@@ -269,7 +272,7 @@ int ps3_irq_plug_setup(enum ps3_cpu_binding cpu, unsigned long outlet,
 		outlet, 0);
 
 	if (result) {
-		pr_info("%s:%d: lv1_connect_irq_plug_ext failed: %s\n",
+		FAIL("%s:%d: lv1_connect_irq_plug_ext failed: %s\n",
 		__func__, __LINE__, ps3_result(result));
 		result = -EPERM;
 		goto fail_connect;
@@ -298,7 +301,7 @@ int ps3_irq_plug_destroy(unsigned int virq)
 	int result;
 	const struct ps3_private *pd = irq_get_chip_data(virq);
 
-	pr_debug("%s:%d: ppe_id %llu, thread_id %llu, virq %u\n", __func__,
+	DBG("%s:%d: ppe_id %llu, thread_id %llu, virq %u\n", __func__,
 		__LINE__, pd->ppe_id, pd->thread_id, virq);
 
 	ps3_chip_mask(irq_get_irq_data(virq));
@@ -306,7 +309,7 @@ int ps3_irq_plug_destroy(unsigned int virq)
 	result = lv1_disconnect_irq_plug_ext(pd->ppe_id, pd->thread_id, virq);
 
 	if (result)
-		pr_info("%s:%d: lv1_disconnect_irq_plug_ext failed: %s\n",
+		FAIL("%s:%d: lv1_disconnect_irq_plug_ext failed: %s\n",
 		__func__, __LINE__, ps3_result(result));
 
 	ps3_virq_destroy(virq);
@@ -334,7 +337,7 @@ int ps3_event_receive_port_setup(enum ps3_cpu_binding cpu, unsigned int *virq)
 	result = lv1_construct_event_receive_port(&outlet);
 
 	if (result) {
-		pr_debug("%s:%d: lv1_construct_event_receive_port failed: %s\n",
+		FAIL("%s:%d: lv1_construct_event_receive_port failed: %s\n",
 			__func__, __LINE__, ps3_result(result));
 		*virq = NO_IRQ;
 		return result;
@@ -360,14 +363,14 @@ int ps3_event_receive_port_destroy(unsigned int virq)
 {
 	int result;
 
-	pr_debug(" -> %s:%d virq %u\n", __func__, __LINE__, virq);
+	DBG(" -> %s:%d virq %u\n", __func__, __LINE__, virq);
 
 	ps3_chip_mask(irq_get_irq_data(virq));
 
 	result = lv1_destruct_event_receive_port(virq_to_hw(virq));
 
 	if (result)
-		pr_debug("%s:%d: lv1_destruct_event_receive_port failed: %s\n",
+		FAIL("%s:%d: lv1_destruct_event_receive_port failed: %s\n",
 			__func__, __LINE__, ps3_result(result));
 
 	/*
@@ -375,7 +378,7 @@ int ps3_event_receive_port_destroy(unsigned int virq)
 	 * calls from interrupt context (smp_call_function) when kexecing.
 	 */
 
-	pr_debug(" <- %s:%d\n", __func__, __LINE__);
+	DBG(" <- %s:%d\n", __func__, __LINE__);
 	return result;
 }
 
@@ -411,7 +414,7 @@ int ps3_sb_event_receive_port_setup(struct ps3_system_bus_device *dev,
 		dev->dev_id, virq_to_hw(*virq), dev->interrupt_id);
 
 	if (result) {
-		pr_debug("%s:%d: lv1_connect_interrupt_event_receive_port"
+		FAIL("%s:%d: lv1_connect_interrupt_event_receive_port"
 			" failed: %s\n", __func__, __LINE__,
 			ps3_result(result));
 		ps3_event_receive_port_destroy(*virq);
@@ -419,7 +422,7 @@ int ps3_sb_event_receive_port_setup(struct ps3_system_bus_device *dev,
 		return result;
 	}
 
-	pr_debug("%s:%d: interrupt_id %u, virq %u\n", __func__, __LINE__,
+	DBG("%s:%d: interrupt_id %u, virq %u\n", __func__, __LINE__,
 		dev->interrupt_id, *virq);
 
 	return 0;
@@ -433,14 +436,14 @@ int ps3_sb_event_receive_port_destroy(struct ps3_system_bus_device *dev,
 
 	int result;
 
-	pr_debug(" -> %s:%d: interrupt_id %u, virq %u\n", __func__, __LINE__,
+	DBG(" -> %s:%d: interrupt_id %u, virq %u\n", __func__, __LINE__,
 		dev->interrupt_id, virq);
 
 	result = lv1_disconnect_interrupt_event_receive_port(dev->bus_id,
 		dev->dev_id, virq_to_hw(virq), dev->interrupt_id);
 
 	if (result)
-		pr_debug("%s:%d: lv1_disconnect_interrupt_event_receive_port"
+		FAIL("%s:%d: lv1_disconnect_interrupt_event_receive_port"
 			" failed: %s\n", __func__, __LINE__,
 			ps3_result(result));
 
@@ -455,7 +458,7 @@ int ps3_sb_event_receive_port_destroy(struct ps3_system_bus_device *dev,
 	result = ps3_virq_destroy(virq);
 	BUG_ON(result);
 
-	pr_debug(" <- %s:%d\n", __func__, __LINE__);
+	DBG(" <- %s:%d\n", __func__, __LINE__);
 	return result;
 }
 EXPORT_SYMBOL(ps3_sb_event_receive_port_destroy);
@@ -480,7 +483,7 @@ int ps3_io_irq_setup(enum ps3_cpu_binding cpu, unsigned int interrupt_id,
 	result = lv1_construct_io_irq_outlet(interrupt_id, &outlet);
 
 	if (result) {
-		pr_debug("%s:%d: lv1_construct_io_irq_outlet failed: %s\n",
+		FAIL("%s:%d: lv1_construct_io_irq_outlet failed: %s\n",
 			__func__, __LINE__, ps3_result(result));
 		return result;
 	}
@@ -510,7 +513,7 @@ int ps3_io_irq_destroy(unsigned int virq)
 	result = lv1_destruct_io_irq_outlet(outlet);
 
 	if (result)
-		pr_debug("%s:%d: lv1_destruct_io_irq_outlet failed: %s\n",
+		FAIL("%s:%d: lv1_destruct_io_irq_outlet failed: %s\n",
 			__func__, __LINE__, ps3_result(result));
 
 	return result;
@@ -542,7 +545,7 @@ int ps3_vuart_irq_setup(enum ps3_cpu_binding cpu, void* virt_addr_bmp,
 	result = lv1_configure_virtual_uart_irq(lpar_addr, &outlet);
 
 	if (result) {
-		pr_debug("%s:%d: lv1_configure_virtual_uart_irq failed: %s\n",
+		FAIL("%s:%d: lv1_configure_virtual_uart_irq failed: %s\n",
 			__func__, __LINE__, ps3_result(result));
 		return result;
 	}
@@ -562,7 +565,7 @@ int ps3_vuart_irq_destroy(unsigned int virq)
 	result = lv1_deconfigure_virtual_uart_irq();
 
 	if (result) {
-		pr_debug("%s:%d: lv1_configure_virtual_uart_irq failed: %s\n",
+		FAIL("%s:%d: lv1_configure_virtual_uart_irq failed: %s\n",
 			__func__, __LINE__, ps3_result(result));
 		return result;
 	}
@@ -595,7 +598,7 @@ int ps3_spe_irq_setup(enum ps3_cpu_binding cpu, unsigned long spe_id,
 	result = lv1_get_spe_irq_outlet(spe_id, class, &outlet);
 
 	if (result) {
-		pr_debug("%s:%d: lv1_get_spe_irq_outlet failed: %s\n",
+		FAIL("%s:%d: lv1_get_spe_irq_outlet failed: %s\n",
 			__func__, __LINE__, ps3_result(result));
 		return result;
 	}
@@ -626,7 +629,7 @@ int ps3_spe_irq_destroy(unsigned int virq)
 static void _dump_64_bmp(const char *header, const u64 *p, unsigned cpu,
 	const char* func, int line)
 {
-	pr_debug("%s:%d: %s %u {%04lx_%04lx_%04lx_%04lx}\n",
+	pr_debug("%s:%d: %s %u {%04llx_%04llx_%04llx_%04llx}\n",
 		func, line, header, cpu,
 		*p >> 48, (*p >> 32) & 0xffff, (*p >> 16) & 0xffff,
 		*p & 0xffff);
@@ -635,7 +638,7 @@ static void _dump_64_bmp(const char *header, const u64 *p, unsigned cpu,
 static void __maybe_unused _dump_256_bmp(const char *header,
 	const u64 *p, unsigned cpu, const char* func, int line)
 {
-	pr_debug("%s:%d: %s %u {%016lx:%016lx:%016lx:%016lx}\n",
+	pr_debug("%s:%d: %s %u {%016llx:%016llx:%016llx:%016llx}\n",
 		func, line, header, cpu, p[0], p[1], p[2], p[3]);
 }
 
@@ -644,10 +647,10 @@ static void _dump_bmp(struct ps3_private* pd, const char* func, int line)
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&pd->bmp.lock, flags);
+	spin_lock_irqsave(&pd->bmp_lock, flags);
 	_dump_64_bmp("stat", &pd->bmp.status, pd->thread_id, func, line);
-	_dump_64_bmp("mask", &pd->bmp.mask, pd->thread_id, func, line);
-	spin_unlock_irqrestore(&pd->bmp.lock, flags);
+	_dump_64_bmp("mask", (u64*)&pd->bmp.mask, pd->thread_id, func, line);
+	spin_unlock_irqrestore(&pd->bmp_lock, flags);
 }
 
 #define dump_mask(_x) _dump_mask(_x, __func__, __LINE__)
@@ -656,9 +659,9 @@ static void __maybe_unused _dump_mask(struct ps3_private *pd,
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&pd->bmp.lock, flags);
-	_dump_64_bmp("mask", &pd->bmp.mask, pd->thread_id, func, line);
-	spin_unlock_irqrestore(&pd->bmp.lock, flags);
+	spin_lock_irqsave(&pd->bmp_lock, flags);
+	_dump_64_bmp("mask", (u64*)&pd->bmp.mask, pd->thread_id, func, line);
+	spin_unlock_irqrestore(&pd->bmp_lock, flags);
 }
 #else
 static void dump_bmp(struct ps3_private* pd) {};
@@ -667,7 +670,7 @@ static void dump_bmp(struct ps3_private* pd) {};
 static int ps3_host_map(struct irq_host *h, unsigned int virq,
 	irq_hw_number_t hwirq)
 {
-	pr_debug("%s:%d: hwirq %lu, virq %u\n", __func__, __LINE__, hwirq,
+	DBG("%s:%d: hwirq %lu, virq %u\n", __func__, __LINE__, hwirq,
 		virq);
 
 	irq_set_chip_and_handler(virq, &ps3_irq_chip, handle_fasteoi_irq);
@@ -690,10 +693,10 @@ void __init ps3_register_ipi_debug_brk(unsigned int cpu, unsigned int virq)
 {
 	struct ps3_private *pd = &per_cpu(ps3_private, cpu);
 
-	pd->bmp.ipi_debug_brk_mask = 0x8000000000000000UL >> virq;
+	set_bit(63 - virq, &pd->ipi_debug_brk_mask);
 
-	pr_debug("%s:%d: cpu %u, virq %u, mask %llxh\n", __func__, __LINE__,
-		cpu, virq, pd->bmp.ipi_debug_brk_mask);
+	DBG("%s:%d: cpu %u, virq %u, mask %lxh\n", __func__, __LINE__,
+		cpu, virq, pd->ipi_debug_brk_mask);
 }
 
 void __init ps3_register_ipi_irq(unsigned int cpu, unsigned int virq)
@@ -714,14 +717,14 @@ static unsigned int ps3_get_irq(void)
 
 	/* check for ipi break first to stop this cpu ASAP */
 
-	if (x & pd->bmp.ipi_debug_brk_mask)
-		x &= pd->bmp.ipi_debug_brk_mask;
+	if (x & pd->ipi_debug_brk_mask)
+		x &= pd->ipi_debug_brk_mask;
 
 	asm volatile("cntlzd %0,%1" : "=r" (plug) : "r" (x));
 	plug &= 0x3f;
 
 	if (unlikely(plug == NO_IRQ)) {
-		pr_debug("%s:%d: no plug found: thread_id %llu\n", __func__,
+		DBG("%s:%d: no plug found: thread_id %llu\n", __func__,
 			__LINE__, pd->thread_id);
 		dump_bmp(&per_cpu(ps3_private, 0));
 		dump_bmp(&per_cpu(ps3_private, 1));
@@ -760,9 +763,9 @@ void __init ps3_init_IRQ(void)
 
 		lv1_get_logical_ppe_id(&pd->ppe_id);
 		pd->thread_id = get_hard_smp_processor_id(cpu);
-		spin_lock_init(&pd->bmp.lock);
+		spin_lock_init(&pd->bmp_lock);
 
-		pr_debug("%s:%d: ppe_id %llu, thread_id %llu, bmp %lxh\n",
+		DBG("%s:%d: ppe_id %llu, thread_id %llu, bmp %lxh\n",
 			__func__, __LINE__, pd->ppe_id, pd->thread_id,
 			ps3_mm_phys_to_lpar(__pa(&pd->bmp)));
 
@@ -770,7 +773,7 @@ void __init ps3_init_IRQ(void)
 			pd->thread_id, ps3_mm_phys_to_lpar(__pa(&pd->bmp)));
 
 		if (result)
-			pr_debug("%s:%d: lv1_configure_irq_state_bitmap failed:"
+			FAIL("%s:%d: lv1_configure_irq_state_bitmap failed:"
 				" %s\n", __func__, __LINE__,
 				ps3_result(result));
 	}
diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c
index 72714ad..8bd6ba5 100644
--- a/arch/powerpc/platforms/ps3/mm.c
+++ b/arch/powerpc/platforms/ps3/mm.c
@@ -319,7 +319,6 @@ static int __init ps3_mm_add_memory(void)
 	}
 
 	memblock_add(start_addr, map.r1.size);
-	memblock_analyze();
 
 	result = online_pages(start_pfn, nr_pages);
 
diff --git a/arch/powerpc/platforms/ps3/repository.c b/arch/powerpc/platforms/ps3/repository.c
index ca40f6a..7bdfea3 100644
--- a/arch/powerpc/platforms/ps3/repository.c
+++ b/arch/powerpc/platforms/ps3/repository.c
@@ -44,7 +44,7 @@ static void _dump_field(const char *hdr, u64 n, const char *func, int line)
 		s[i] = (in[i] <= 126 && in[i] >= 32) ? in[i] : '.';
 	s[i] = 0;
 
-	pr_debug("%s:%d: %s%016llx : %s\n", func, line, hdr, n, s);
+	pr_devel("%s:%d: %s%016llx : %s\n", func, line, hdr, n, s);
 #endif
 }
 
@@ -53,7 +53,7 @@ static void _dump_field(const char *hdr, u64 n, const char *func, int line)
 static void _dump_node_name(unsigned int lpar_id, u64 n1, u64 n2, u64 n3,
 	u64 n4, const char *func, int line)
 {
-	pr_debug("%s:%d: lpar: %u\n", func, line, lpar_id);
+	pr_devel("%s:%d: lpar: %u\n", func, line, lpar_id);
 	_dump_field("n1: ", n1, func, line);
 	_dump_field("n2: ", n2, func, line);
 	_dump_field("n3: ", n3, func, line);
@@ -65,13 +65,13 @@ static void _dump_node_name(unsigned int lpar_id, u64 n1, u64 n2, u64 n3,
 static void _dump_node(unsigned int lpar_id, u64 n1, u64 n2, u64 n3, u64 n4,
 	u64 v1, u64 v2, const char *func, int line)
 {
-	pr_debug("%s:%d: lpar: %u\n", func, line, lpar_id);
+	pr_devel("%s:%d: lpar: %u\n", func, line, lpar_id);
 	_dump_field("n1: ", n1, func, line);
 	_dump_field("n2: ", n2, func, line);
 	_dump_field("n3: ", n3, func, line);
 	_dump_field("n4: ", n4, func, line);
-	pr_debug("%s:%d: v1: %016llx\n", func, line, v1);
-	pr_debug("%s:%d: v2: %016llx\n", func, line, v2);
+	pr_devel("%s:%d: v1: %016llx\n", func, line, v1);
+	pr_devel("%s:%d: v2: %016llx\n", func, line, v2);
 }
 
 /**
@@ -131,11 +131,11 @@ static int read_node(unsigned int lpar_id, u64 n1, u64 n2, u64 n3, u64 n4,
 		lpar_id = id;
 	}
 
-	result = lv1_get_repository_node_value(lpar_id, n1, n2, n3, n4, &v1,
+	result = lv1_read_repository_node(lpar_id, n1, n2, n3, n4, &v1,
 		&v2);
 
 	if (result) {
-		pr_debug("%s:%d: lv1_get_repository_node_value failed: %s\n",
+		pr_warn("%s:%d: lv1_read_repository_node failed: %s\n",
 			__func__, __LINE__, ps3_result(result));
 		dump_node_name(lpar_id, n1, n2, n3, n4);
 		return -ENOENT;
@@ -149,10 +149,10 @@ static int read_node(unsigned int lpar_id, u64 n1, u64 n2, u64 n3, u64 n4,
 		*_v2 = v2;
 
 	if (v1 && !_v1)
-		pr_debug("%s:%d: warning: discarding non-zero v1: %016llx\n",
+		pr_devel("%s:%d: warning: discarding non-zero v1: %016llx\n",
 			__func__, __LINE__, v1);
 	if (v2 && !_v2)
-		pr_debug("%s:%d: warning: discarding non-zero v2: %016llx\n",
+		pr_devel("%s:%d: warning: discarding non-zero v2: %016llx\n",
 			__func__, __LINE__, v2);
 
 	return 0;
@@ -323,16 +323,16 @@ int ps3_repository_find_device(struct ps3_repository_device *repo)
 	result = ps3_repository_read_bus_num_dev(tmp.bus_index, &num_dev);
 
 	if (result) {
-		pr_debug("%s:%d read_bus_num_dev failed\n", __func__, __LINE__);
+		pr_devel("%s:%d read_bus_num_dev failed\n", __func__, __LINE__);
 		return result;
 	}
 
-	pr_debug("%s:%d: bus_type %u, bus_index %u, bus_id %llu, num_dev %u\n",
+	pr_devel("%s:%d: bus_type %u, bus_index %u, bus_id %llu, num_dev %u\n",
 		__func__, __LINE__, tmp.bus_type, tmp.bus_index, tmp.bus_id,
 		num_dev);
 
 	if (tmp.dev_index >= num_dev) {
-		pr_debug("%s:%d: no device found\n", __func__, __LINE__);
+		pr_devel("%s:%d: no device found\n", __func__, __LINE__);
 		return -ENODEV;
 	}
 
@@ -340,7 +340,7 @@ int ps3_repository_find_device(struct ps3_repository_device *repo)
 		&tmp.dev_type);
 
 	if (result) {
-		pr_debug("%s:%d read_dev_type failed\n", __func__, __LINE__);
+		pr_devel("%s:%d read_dev_type failed\n", __func__, __LINE__);
 		return result;
 	}
 
@@ -348,12 +348,12 @@ int ps3_repository_find_device(struct ps3_repository_device *repo)
 		&tmp.dev_id);
 
 	if (result) {
-		pr_debug("%s:%d ps3_repository_read_dev_id failed\n", __func__,
+		pr_devel("%s:%d ps3_repository_read_dev_id failed\n", __func__,
 		__LINE__);
 		return result;
 	}
 
-	pr_debug("%s:%d: found: dev_type %u, dev_index %u, dev_id %llu\n",
+	pr_devel("%s:%d: found: dev_type %u, dev_index %u, dev_id %llu\n",
 		__func__, __LINE__, tmp.dev_type, tmp.dev_index, tmp.dev_id);
 
 	*repo = tmp;
@@ -367,14 +367,14 @@ int ps3_repository_find_device_by_id(struct ps3_repository_device *repo,
 	struct ps3_repository_device tmp;
 	unsigned int num_dev;
 
-	pr_debug(" -> %s:%u: find device by id %llu:%llu\n", __func__, __LINE__,
+	pr_devel(" -> %s:%u: find device by id %llu:%llu\n", __func__, __LINE__,
 		 bus_id, dev_id);
 
 	for (tmp.bus_index = 0; tmp.bus_index < 10; tmp.bus_index++) {
 		result = ps3_repository_read_bus_id(tmp.bus_index,
 						    &tmp.bus_id);
 		if (result) {
-			pr_debug("%s:%u read_bus_id(%u) failed\n", __func__,
+			pr_devel("%s:%u read_bus_id(%u) failed\n", __func__,
 				 __LINE__, tmp.bus_index);
 			return result;
 		}
@@ -382,23 +382,23 @@ int ps3_repository_find_device_by_id(struct ps3_repository_device *repo,
 		if (tmp.bus_id == bus_id)
 			goto found_bus;
 
-		pr_debug("%s:%u: skip, bus_id %llu\n", __func__, __LINE__,
+		pr_devel("%s:%u: skip, bus_id %llu\n", __func__, __LINE__,
 			 tmp.bus_id);
 	}
-	pr_debug(" <- %s:%u: bus not found\n", __func__, __LINE__);
+	pr_devel(" <- %s:%u: bus not found\n", __func__, __LINE__);
 	return result;
 
 found_bus:
 	result = ps3_repository_read_bus_type(tmp.bus_index, &tmp.bus_type);
 	if (result) {
-		pr_debug("%s:%u read_bus_type(%u) failed\n", __func__,
+		pr_devel("%s:%u read_bus_type(%u) failed\n", __func__,
 			 __LINE__, tmp.bus_index);
 		return result;
 	}
 
 	result = ps3_repository_read_bus_num_dev(tmp.bus_index, &num_dev);
 	if (result) {
-		pr_debug("%s:%u read_bus_num_dev failed\n", __func__,
+		pr_devel("%s:%u read_bus_num_dev failed\n", __func__,
 			 __LINE__);
 		return result;
 	}
@@ -408,7 +408,7 @@ found_bus:
 						    tmp.dev_index,
 						    &tmp.dev_id);
 		if (result) {
-			pr_debug("%s:%u read_dev_id(%u:%u) failed\n", __func__,
+			pr_devel("%s:%u read_dev_id(%u:%u) failed\n", __func__,
 				 __LINE__, tmp.bus_index, tmp.dev_index);
 			return result;
 		}
@@ -416,21 +416,21 @@ found_bus:
 		if (tmp.dev_id == dev_id)
 			goto found_dev;
 
-		pr_debug("%s:%u: skip, dev_id %llu\n", __func__, __LINE__,
+		pr_devel("%s:%u: skip, dev_id %llu\n", __func__, __LINE__,
 			 tmp.dev_id);
 	}
-	pr_debug(" <- %s:%u: dev not found\n", __func__, __LINE__);
+	pr_devel(" <- %s:%u: dev not found\n", __func__, __LINE__);
 	return result;
 
 found_dev:
 	result = ps3_repository_read_dev_type(tmp.bus_index, tmp.dev_index,
 					      &tmp.dev_type);
 	if (result) {
-		pr_debug("%s:%u read_dev_type failed\n", __func__, __LINE__);
+		pr_devel("%s:%u read_dev_type failed\n", __func__, __LINE__);
 		return result;
 	}
 
-	pr_debug(" <- %s:%u: found: type (%u:%u) index (%u:%u) id (%llu:%llu)\n",
+	pr_devel(" <- %s:%u: found: type (%u:%u) index (%u:%u) id (%llu:%llu)\n",
 		 __func__, __LINE__, tmp.bus_type, tmp.dev_type, tmp.bus_index,
 		 tmp.dev_index, tmp.bus_id, tmp.dev_id);
 	*repo = tmp;
@@ -443,18 +443,18 @@ int __devinit ps3_repository_find_devices(enum ps3_bus_type bus_type,
 	int result = 0;
 	struct ps3_repository_device repo;
 
-	pr_debug(" -> %s:%d: find bus_type %u\n", __func__, __LINE__, bus_type);
+	pr_devel(" -> %s:%d: find bus_type %u\n", __func__, __LINE__, bus_type);
 
 	repo.bus_type = bus_type;
 	result = ps3_repository_find_bus(repo.bus_type, 0, &repo.bus_index);
 	if (result) {
-		pr_debug(" <- %s:%u: bus not found\n", __func__, __LINE__);
+		pr_devel(" <- %s:%u: bus not found\n", __func__, __LINE__);
 		return result;
 	}
 
 	result = ps3_repository_read_bus_id(repo.bus_index, &repo.bus_id);
 	if (result) {
-		pr_debug("%s:%d read_bus_id(%u) failed\n", __func__, __LINE__,
+		pr_devel("%s:%d read_bus_id(%u) failed\n", __func__, __LINE__,
 			 repo.bus_index);
 		return result;
 	}
@@ -469,13 +469,13 @@ int __devinit ps3_repository_find_devices(enum ps3_bus_type bus_type,
 
 		result = callback(&repo);
 		if (result) {
-			pr_debug("%s:%d: abort at callback\n", __func__,
+			pr_devel("%s:%d: abort at callback\n", __func__,
 				__LINE__);
 			break;
 		}
 	}
 
-	pr_debug(" <- %s:%d\n", __func__, __LINE__);
+	pr_devel(" <- %s:%d\n", __func__, __LINE__);
 	return result;
 }
 
@@ -489,7 +489,7 @@ int ps3_repository_find_bus(enum ps3_bus_type bus_type, unsigned int from,
 	for (i = from; i < 10; i++) {
 		error = ps3_repository_read_bus_type(i, &type);
 		if (error) {
-			pr_debug("%s:%d read_bus_type failed\n",
+			pr_devel("%s:%d read_bus_type failed\n",
 				__func__, __LINE__);
 			*bus_index = UINT_MAX;
 			return error;
@@ -509,7 +509,7 @@ int ps3_repository_find_interrupt(const struct ps3_repository_device *repo,
 	int result = 0;
 	unsigned int res_index;
 
-	pr_debug("%s:%d: find intr_type %u\n", __func__, __LINE__, intr_type);
+	pr_devel("%s:%d: find intr_type %u\n", __func__, __LINE__, intr_type);
 
 	*interrupt_id = UINT_MAX;
 
@@ -521,7 +521,7 @@ int ps3_repository_find_interrupt(const struct ps3_repository_device *repo,
 			repo->dev_index, res_index, &t, &id);
 
 		if (result) {
-			pr_debug("%s:%d read_dev_intr failed\n",
+			pr_devel("%s:%d read_dev_intr failed\n",
 				__func__, __LINE__);
 			return result;
 		}
@@ -535,7 +535,7 @@ int ps3_repository_find_interrupt(const struct ps3_repository_device *repo,
 	if (res_index == 10)
 		return -ENODEV;
 
-	pr_debug("%s:%d: found intr_type %u at res_index %u\n",
+	pr_devel("%s:%d: found intr_type %u at res_index %u\n",
 		__func__, __LINE__, intr_type, res_index);
 
 	return result;
@@ -547,7 +547,7 @@ int ps3_repository_find_reg(const struct ps3_repository_device *repo,
 	int result = 0;
 	unsigned int res_index;
 
-	pr_debug("%s:%d: find reg_type %u\n", __func__, __LINE__, reg_type);
+	pr_devel("%s:%d: find reg_type %u\n", __func__, __LINE__, reg_type);
 
 	*bus_addr = *len = 0;
 
@@ -560,7 +560,7 @@ int ps3_repository_find_reg(const struct ps3_repository_device *repo,
 			repo->dev_index, res_index, &t, &a, &l);
 
 		if (result) {
-			pr_debug("%s:%d read_dev_reg failed\n",
+			pr_devel("%s:%d read_dev_reg failed\n",
 				__func__, __LINE__);
 			return result;
 		}
@@ -575,7 +575,7 @@ int ps3_repository_find_reg(const struct ps3_repository_device *repo,
 	if (res_index == 10)
 		return -ENODEV;
 
-	pr_debug("%s:%d: found reg_type %u at res_index %u\n",
+	pr_devel("%s:%d: found reg_type %u at res_index %u\n",
 		__func__, __LINE__, reg_type, res_index);
 
 	return result;
@@ -1009,7 +1009,7 @@ int ps3_repository_dump_resource_info(const struct ps3_repository_device *repo)
 	int result = 0;
 	unsigned int res_index;
 
-	pr_debug(" -> %s:%d: (%u:%u)\n", __func__, __LINE__,
+	pr_devel(" -> %s:%d: (%u:%u)\n", __func__, __LINE__,
 		repo->bus_index, repo->dev_index);
 
 	for (res_index = 0; res_index < 10; res_index++) {
@@ -1021,13 +1021,13 @@ int ps3_repository_dump_resource_info(const struct ps3_repository_device *repo)
 
 		if (result) {
 			if (result !=  LV1_NO_ENTRY)
-				pr_debug("%s:%d ps3_repository_read_dev_intr"
+				pr_devel("%s:%d ps3_repository_read_dev_intr"
 					" (%u:%u) failed\n", __func__, __LINE__,
 					repo->bus_index, repo->dev_index);
 			break;
 		}
 
-		pr_debug("%s:%d (%u:%u) intr_type %u, interrupt_id %u\n",
+		pr_devel("%s:%d (%u:%u) intr_type %u, interrupt_id %u\n",
 			__func__, __LINE__, repo->bus_index, repo->dev_index,
 			intr_type, interrupt_id);
 	}
@@ -1042,18 +1042,18 @@ int ps3_repository_dump_resource_info(const struct ps3_repository_device *repo)
 
 		if (result) {
 			if (result !=  LV1_NO_ENTRY)
-				pr_debug("%s:%d ps3_repository_read_dev_reg"
+				pr_devel("%s:%d ps3_repository_read_dev_reg"
 					" (%u:%u) failed\n", __func__, __LINE__,
 					repo->bus_index, repo->dev_index);
 			break;
 		}
 
-		pr_debug("%s:%d (%u:%u) reg_type %u, bus_addr %lxh, len %lxh\n",
+		pr_devel("%s:%d (%u:%u) reg_type %u, bus_addr %llxh, len %llxh\n",
 			__func__, __LINE__, repo->bus_index, repo->dev_index,
 			reg_type, bus_addr, len);
 	}
 
-	pr_debug(" <- %s:%d\n", __func__, __LINE__);
+	pr_devel(" <- %s:%d\n", __func__, __LINE__);
 	return result;
 }
 
@@ -1063,22 +1063,22 @@ static int dump_stor_dev_info(struct ps3_repository_device *repo)
 	unsigned int num_regions, region_index;
 	u64 port, blk_size, num_blocks;
 
-	pr_debug(" -> %s:%d: (%u:%u)\n", __func__, __LINE__,
+	pr_devel(" -> %s:%d: (%u:%u)\n", __func__, __LINE__,
 		repo->bus_index, repo->dev_index);
 
 	result = ps3_repository_read_stor_dev_info(repo->bus_index,
 		repo->dev_index, &port, &blk_size, &num_blocks, &num_regions);
 	if (result) {
-		pr_debug("%s:%d ps3_repository_read_stor_dev_info"
+		pr_devel("%s:%d ps3_repository_read_stor_dev_info"
 			" (%u:%u) failed\n", __func__, __LINE__,
 			repo->bus_index, repo->dev_index);
 		goto out;
 	}
 
-	pr_debug("%s:%d  (%u:%u): port %lu, blk_size %lu, num_blocks "
-		 "%lu, num_regions %u\n",
-		 __func__, __LINE__, repo->bus_index, repo->dev_index, port,
-		 blk_size, num_blocks, num_regions);
+	pr_devel("%s:%d  (%u:%u): port %llu, blk_size %llu, num_blocks "
+		 "%llu, num_regions %u\n",
+		 __func__, __LINE__, repo->bus_index, repo->dev_index,
+		port, blk_size, num_blocks, num_regions);
 
 	for (region_index = 0; region_index < num_regions; region_index++) {
 		unsigned int region_id;
@@ -1088,19 +1088,20 @@ static int dump_stor_dev_info(struct ps3_repository_device *repo)
 			repo->dev_index, region_index, &region_id,
 			&region_start, &region_size);
 		if (result) {
-			 pr_debug("%s:%d ps3_repository_read_stor_dev_region"
+			 pr_devel("%s:%d ps3_repository_read_stor_dev_region"
 				  " (%u:%u) failed\n", __func__, __LINE__,
 				  repo->bus_index, repo->dev_index);
 			break;
 		}
 
-		pr_debug("%s:%d (%u:%u) region_id %u, start %lxh, size %lxh\n",
+		pr_devel("%s:%d (%u:%u) region_id %u, start %lxh, size %lxh\n",
 			__func__, __LINE__, repo->bus_index, repo->dev_index,
-			region_id, region_start, region_size);
+			region_id, (unsigned long)region_start,
+			(unsigned long)region_size);
 	}
 
 out:
-	pr_debug(" <- %s:%d\n", __func__, __LINE__);
+	pr_devel(" <- %s:%d\n", __func__, __LINE__);
 	return result;
 }
 
@@ -1109,7 +1110,7 @@ static int dump_device_info(struct ps3_repository_device *repo,
 {
 	int result = 0;
 
-	pr_debug(" -> %s:%d: bus_%u\n", __func__, __LINE__, repo->bus_index);
+	pr_devel(" -> %s:%d: bus_%u\n", __func__, __LINE__, repo->bus_index);
 
 	for (repo->dev_index = 0; repo->dev_index < num_dev;
 		repo->dev_index++) {
@@ -1118,7 +1119,7 @@ static int dump_device_info(struct ps3_repository_device *repo,
 			repo->dev_index, &repo->dev_type);
 
 		if (result) {
-			pr_debug("%s:%d ps3_repository_read_dev_type"
+			pr_devel("%s:%d ps3_repository_read_dev_type"
 				" (%u:%u) failed\n", __func__, __LINE__,
 				repo->bus_index, repo->dev_index);
 			break;
@@ -1128,15 +1129,15 @@ static int dump_device_info(struct ps3_repository_device *repo,
 			repo->dev_index, &repo->dev_id);
 
 		if (result) {
-			pr_debug("%s:%d ps3_repository_read_dev_id"
+			pr_devel("%s:%d ps3_repository_read_dev_id"
 				" (%u:%u) failed\n", __func__, __LINE__,
 				repo->bus_index, repo->dev_index);
 			continue;
 		}
 
-		pr_debug("%s:%d  (%u:%u): dev_type %u, dev_id %lu\n", __func__,
+		pr_devel("%s:%d  (%u:%u): dev_type %u, dev_id %lu\n", __func__,
 			__LINE__, repo->bus_index, repo->dev_index,
-			repo->dev_type, repo->dev_id);
+			repo->dev_type, (unsigned long)repo->dev_id);
 
 		ps3_repository_dump_resource_info(repo);
 
@@ -1144,7 +1145,7 @@ static int dump_device_info(struct ps3_repository_device *repo,
 			dump_stor_dev_info(repo);
 	}
 
-	pr_debug(" <- %s:%d\n", __func__, __LINE__);
+	pr_devel(" <- %s:%d\n", __func__, __LINE__);
 	return result;
 }
 
@@ -1153,7 +1154,7 @@ int ps3_repository_dump_bus_info(void)
 	int result = 0;
 	struct ps3_repository_device repo;
 
-	pr_debug(" -> %s:%d\n", __func__, __LINE__);
+	pr_devel(" -> %s:%d\n", __func__, __LINE__);
 
 	memset(&repo, 0, sizeof(repo));
 
@@ -1164,7 +1165,7 @@ int ps3_repository_dump_bus_info(void)
 			&repo.bus_type);
 
 		if (result) {
-			pr_debug("%s:%d read_bus_type(%u) failed\n",
+			pr_devel("%s:%d read_bus_type(%u) failed\n",
 				__func__, __LINE__, repo.bus_index);
 			break;
 		}
@@ -1173,32 +1174,32 @@ int ps3_repository_dump_bus_info(void)
 			&repo.bus_id);
 
 		if (result) {
-			pr_debug("%s:%d read_bus_id(%u) failed\n",
+			pr_devel("%s:%d read_bus_id(%u) failed\n",
 				__func__, __LINE__, repo.bus_index);
 			continue;
 		}
 
 		if (repo.bus_index != repo.bus_id)
-			pr_debug("%s:%d bus_index != bus_id\n",
+			pr_devel("%s:%d bus_index != bus_id\n",
 				__func__, __LINE__);
 
 		result = ps3_repository_read_bus_num_dev(repo.bus_index,
 			&num_dev);
 
 		if (result) {
-			pr_debug("%s:%d read_bus_num_dev(%u) failed\n",
+			pr_devel("%s:%d read_bus_num_dev(%u) failed\n",
 				__func__, __LINE__, repo.bus_index);
 			continue;
 		}
 
-		pr_debug("%s:%d bus_%u: bus_type %u, bus_id %lu, num_dev %u\n",
+		pr_devel("%s:%d bus_%u: bus_type %u, bus_id %lu, num_dev %u\n",
 			__func__, __LINE__, repo.bus_index, repo.bus_type,
-			repo.bus_id, num_dev);
+			(unsigned long)repo.bus_id, num_dev);
 
 		dump_device_info(&repo, num_dev);
 	}
 
-	pr_debug(" <- %s:%d\n", __func__, __LINE__);
+	pr_devel(" <- %s:%d\n", __func__, __LINE__);
 	return result;
 }
 
diff --git a/arch/powerpc/platforms/ps3/setup.c b/arch/powerpc/platforms/ps3/setup.c
index e8ec1b2..2d664c5 100644
--- a/arch/powerpc/platforms/ps3/setup.c
+++ b/arch/powerpc/platforms/ps3/setup.c
@@ -193,10 +193,12 @@ static int ps3_set_dabr(unsigned long dabr)
 
 static void __init ps3_setup_arch(void)
 {
+	u64 tmp;
 
 	DBG(" -> %s:%d\n", __func__, __LINE__);
 
-	lv1_get_version_info(&ps3_firmware_version.raw);
+	lv1_get_version_info(&ps3_firmware_version.raw, &tmp);
+
 	printk(KERN_INFO "PS3 firmware version %u.%u.%u\n",
 	       ps3_firmware_version.major, ps3_firmware_version.minor,
 	       ps3_firmware_version.rev);
diff --git a/arch/powerpc/platforms/ps3/smp.c b/arch/powerpc/platforms/ps3/smp.c
index efc1cd8..4b35166 100644
--- a/arch/powerpc/platforms/ps3/smp.c
+++ b/arch/powerpc/platforms/ps3/smp.c
@@ -57,7 +57,7 @@ static void ps3_smp_message_pass(int cpu, int msg)
 			" (%d)\n", __func__, __LINE__, cpu, msg, result);
 }
 
-static int ps3_smp_probe(void)
+static int __init ps3_smp_probe(void)
 {
 	int cpu;
 
diff --git a/arch/powerpc/platforms/ps3/spu.c b/arch/powerpc/platforms/ps3/spu.c
index 451fad1..e17fa14 100644
--- a/arch/powerpc/platforms/ps3/spu.c
+++ b/arch/powerpc/platforms/ps3/spu.c
@@ -154,7 +154,7 @@ static unsigned long get_vas_id(void)
 	u64 id;
 
 	lv1_get_logical_ppe_id(&id);
-	lv1_get_virtual_address_space_id_of_ppe(id, &id);
+	lv1_get_virtual_address_space_id_of_ppe(&id);
 
 	return id;
 }
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index c81f6bb..ae7b6d4 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -120,3 +120,12 @@ config DTL
 	  which are accessible through a debugfs file.
 
 	  Say N if you are unsure.
+
+config PSERIES_IDLE
+	tristate "Cpuidle driver for pSeries platforms"
+	depends on CPU_IDLE
+	depends on PPC_PSERIES
+	default y
+	help
+	  Select this option to enable processor idle state management
+	  through cpuidle subsystem.
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index 3556e40..236db46 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_PHYP_DUMP)		+= phyp_dump.o
 obj-$(CONFIG_CMM)		+= cmm.o
 obj-$(CONFIG_DTL)		+= dtl.o
 obj-$(CONFIG_IO_EVENT_IRQ)	+= io_event_irq.o
+obj-$(CONFIG_PSERIES_IDLE)	+= processor_idle.o
 
 ifeq ($(CONFIG_PPC_PSERIES),y)
 obj-$(CONFIG_SUSPEND)		+= suspend.o
diff --git a/arch/powerpc/platforms/pseries/cmm.c b/arch/powerpc/platforms/pseries/cmm.c
index 3cafc30..c638535 100644
--- a/arch/powerpc/platforms/pseries/cmm.c
+++ b/arch/powerpc/platforms/pseries/cmm.c
@@ -33,7 +33,7 @@
 #include <linux/sched.h>
 #include <linux/stringify.h>
 #include <linux/swap.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <asm/firmware.h>
 #include <asm/hvcall.h>
 #include <asm/mmu.h>
@@ -65,7 +65,7 @@ static unsigned int oom_kb = CMM_OOM_KB;
 static unsigned int cmm_debug = CMM_DEBUG;
 static unsigned int cmm_disabled = CMM_DISABLE;
 static unsigned long min_mem_mb = CMM_MIN_MEM_MB;
-static struct sys_device cmm_sysdev;
+static struct device cmm_dev;
 
 MODULE_AUTHOR("Brian King <brking@linux.vnet.ibm.com>");
 MODULE_DESCRIPTION("IBM System p Collaborative Memory Manager");
@@ -347,25 +347,25 @@ static int cmm_thread(void *dummy)
 }
 
 #define CMM_SHOW(name, format, args...)			\
-	static ssize_t show_##name(struct sys_device *dev,	\
-				   struct sysdev_attribute *attr,	\
+	static ssize_t show_##name(struct device *dev,	\
+				   struct device_attribute *attr,	\
 				   char *buf)			\
 	{							\
 		return sprintf(buf, format, ##args);		\
 	}							\
-	static SYSDEV_ATTR(name, S_IRUGO, show_##name, NULL)
+	static DEVICE_ATTR(name, S_IRUGO, show_##name, NULL)
 
 CMM_SHOW(loaned_kb, "%lu\n", PAGES2KB(loaned_pages));
 CMM_SHOW(loaned_target_kb, "%lu\n", PAGES2KB(loaned_pages_target));
 
-static ssize_t show_oom_pages(struct sys_device *dev,
-			      struct sysdev_attribute *attr, char *buf)
+static ssize_t show_oom_pages(struct device *dev,
+			      struct device_attribute *attr, char *buf)
 {
 	return sprintf(buf, "%lu\n", PAGES2KB(oom_freed_pages));
 }
 
-static ssize_t store_oom_pages(struct sys_device *dev,
-			       struct sysdev_attribute *attr,
+static ssize_t store_oom_pages(struct device *dev,
+			       struct device_attribute *attr,
 			       const char *buf, size_t count)
 {
 	unsigned long val = simple_strtoul (buf, NULL, 10);
@@ -379,17 +379,18 @@ static ssize_t store_oom_pages(struct sys_device *dev,
 	return count;
 }
 
-static SYSDEV_ATTR(oom_freed_kb, S_IWUSR| S_IRUGO,
+static DEVICE_ATTR(oom_freed_kb, S_IWUSR | S_IRUGO,
 		   show_oom_pages, store_oom_pages);
 
-static struct sysdev_attribute *cmm_attrs[] = {
-	&attr_loaned_kb,
-	&attr_loaned_target_kb,
-	&attr_oom_freed_kb,
+static struct device_attribute *cmm_attrs[] = {
+	&dev_attr_loaned_kb,
+	&dev_attr_loaned_target_kb,
+	&dev_attr_oom_freed_kb,
 };
 
-static struct sysdev_class cmm_sysdev_class = {
+static struct bus_type cmm_subsys = {
 	.name = "cmm",
+	.dev_name = "cmm",
 };
 
 /**
@@ -398,21 +399,21 @@ static struct sysdev_class cmm_sysdev_class = {
  * Return value:
  * 	0 on success / other on failure
  **/
-static int cmm_sysfs_register(struct sys_device *sysdev)
+static int cmm_sysfs_register(struct device *dev)
 {
 	int i, rc;
 
-	if ((rc = sysdev_class_register(&cmm_sysdev_class)))
+	if ((rc = subsys_system_register(&cmm_subsys, NULL)))
 		return rc;
 
-	sysdev->id = 0;
-	sysdev->cls = &cmm_sysdev_class;
+	dev->id = 0;
+	dev->bus = &cmm_subsys;
 
-	if ((rc = sysdev_register(sysdev)))
-		goto class_unregister;
+	if ((rc = device_register(dev)))
+		goto subsys_unregister;
 
 	for (i = 0; i < ARRAY_SIZE(cmm_attrs); i++) {
-		if ((rc = sysdev_create_file(sysdev, cmm_attrs[i])))
+		if ((rc = device_create_file(dev, cmm_attrs[i])))
 			goto fail;
 	}
 
@@ -420,10 +421,10 @@ static int cmm_sysfs_register(struct sys_device *sysdev)
 
 fail:
 	while (--i >= 0)
-		sysdev_remove_file(sysdev, cmm_attrs[i]);
-	sysdev_unregister(sysdev);
-class_unregister:
-	sysdev_class_unregister(&cmm_sysdev_class);
+		device_remove_file(dev, cmm_attrs[i]);
+	device_unregister(dev);
+subsys_unregister:
+	bus_unregister(&cmm_subsys);
 	return rc;
 }
 
@@ -431,14 +432,14 @@ class_unregister:
  * cmm_unregister_sysfs - Unregister from sysfs
  *
  **/
-static void cmm_unregister_sysfs(struct sys_device *sysdev)
+static void cmm_unregister_sysfs(struct device *dev)
 {
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(cmm_attrs); i++)
-		sysdev_remove_file(sysdev, cmm_attrs[i]);
-	sysdev_unregister(sysdev);
-	sysdev_class_unregister(&cmm_sysdev_class);
+		device_remove_file(dev, cmm_attrs[i]);
+	device_unregister(dev);
+	bus_unregister(&cmm_subsys);
 }
 
 /**
@@ -657,7 +658,7 @@ static int cmm_init(void)
 	if ((rc = register_reboot_notifier(&cmm_reboot_nb)))
 		goto out_oom_notifier;
 
-	if ((rc = cmm_sysfs_register(&cmm_sysdev)))
+	if ((rc = cmm_sysfs_register(&cmm_dev)))
 		goto out_reboot_notifier;
 
 	if (register_memory_notifier(&cmm_mem_nb) ||
@@ -678,7 +679,7 @@ static int cmm_init(void)
 out_unregister_notifier:
 	unregister_memory_notifier(&cmm_mem_nb);
 	unregister_memory_isolate_notifier(&cmm_mem_isolate_nb);
-	cmm_unregister_sysfs(&cmm_sysdev);
+	cmm_unregister_sysfs(&cmm_dev);
 out_reboot_notifier:
 	unregister_reboot_notifier(&cmm_reboot_nb);
 out_oom_notifier:
@@ -701,7 +702,7 @@ static void cmm_exit(void)
 	unregister_memory_notifier(&cmm_mem_nb);
 	unregister_memory_isolate_notifier(&cmm_mem_isolate_nb);
 	cmm_free_pages(loaned_pages);
-	cmm_unregister_sysfs(&cmm_sysdev);
+	cmm_unregister_sysfs(&cmm_dev);
 }
 
 /**
diff --git a/arch/powerpc/platforms/pseries/hvCall_inst.c b/arch/powerpc/platforms/pseries/hvCall_inst.c
index f106662..c9311cf 100644
--- a/arch/powerpc/platforms/pseries/hvCall_inst.c
+++ b/arch/powerpc/platforms/pseries/hvCall_inst.c
@@ -109,7 +109,7 @@ static void probe_hcall_entry(void *ignored, unsigned long opcode, unsigned long
 	if (opcode > MAX_HCALL_OPCODE)
 		return;
 
-	h = &get_cpu_var(hcall_stats)[opcode / 4];
+	h = &__get_cpu_var(hcall_stats)[opcode / 4];
 	h->tb_start = mftb();
 	h->purr_start = mfspr(SPRN_PURR);
 }
@@ -126,8 +126,6 @@ static void probe_hcall_exit(void *ignored, unsigned long opcode, unsigned long
 	h->num_calls++;
 	h->tb_total += mftb() - h->tb_start;
 	h->purr_total += mfspr(SPRN_PURR) - h->purr_start;
-
-	put_cpu_var(hcall_stats);
 }
 
 static int __init hcall_inst_init(void)
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index b719d97..c442f2b 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -52,13 +52,42 @@
 #include "plpar_wrappers.h"
 
 
+static void tce_invalidate_pSeries_sw(struct iommu_table *tbl,
+				      u64 *startp, u64 *endp)
+{
+	u64 __iomem *invalidate = (u64 __iomem *)tbl->it_index;
+	unsigned long start, end, inc;
+
+	start = __pa(startp);
+	end = __pa(endp);
+	inc = L1_CACHE_BYTES; /* invalidate a cacheline of TCEs at a time */
+
+	/* If this is non-zero, change the format.  We shift the
+	 * address and or in the magic from the device tree. */
+	if (tbl->it_busno) {
+		start <<= 12;
+		end <<= 12;
+		inc <<= 12;
+		start |= tbl->it_busno;
+		end |= tbl->it_busno;
+	}
+
+	end |= inc - 1; /* round up end to be different than start */
+
+	mb(); /* Make sure TCEs in memory are written */
+	while (start <= end) {
+		out_be64(invalidate, start);
+		start += inc;
+	}
+}
+
 static int tce_build_pSeries(struct iommu_table *tbl, long index,
 			      long npages, unsigned long uaddr,
 			      enum dma_data_direction direction,
 			      struct dma_attrs *attrs)
 {
 	u64 proto_tce;
-	u64 *tcep;
+	u64 *tcep, *tces;
 	u64 rpn;
 
 	proto_tce = TCE_PCI_READ; // Read allowed
@@ -66,7 +95,7 @@ static int tce_build_pSeries(struct iommu_table *tbl, long index,
 	if (direction != DMA_TO_DEVICE)
 		proto_tce |= TCE_PCI_WRITE;
 
-	tcep = ((u64 *)tbl->it_base) + index;
+	tces = tcep = ((u64 *)tbl->it_base) + index;
 
 	while (npages--) {
 		/* can't move this out since we might cross MEMBLOCK boundary */
@@ -76,18 +105,24 @@ static int tce_build_pSeries(struct iommu_table *tbl, long index,
 		uaddr += TCE_PAGE_SIZE;
 		tcep++;
 	}
+
+	if (tbl->it_type == TCE_PCI_SWINV_CREATE)
+		tce_invalidate_pSeries_sw(tbl, tces, tcep - 1);
 	return 0;
 }
 
 
 static void tce_free_pSeries(struct iommu_table *tbl, long index, long npages)
 {
-	u64 *tcep;
+	u64 *tcep, *tces;
 
-	tcep = ((u64 *)tbl->it_base) + index;
+	tces = tcep = ((u64 *)tbl->it_base) + index;
 
 	while (npages--)
 		*(tcep++) = 0;
+
+	if (tbl->it_type == TCE_PCI_SWINV_FREE)
+		tce_invalidate_pSeries_sw(tbl, tces, tcep - 1);
 }
 
 static unsigned long tce_get_pseries(struct iommu_table *tbl, long index)
@@ -425,7 +460,7 @@ static void iommu_table_setparms(struct pci_controller *phb,
 				 struct iommu_table *tbl)
 {
 	struct device_node *node;
-	const unsigned long *basep;
+	const unsigned long *basep, *sw_inval;
 	const u32 *sizep;
 
 	node = phb->dn;
@@ -462,6 +497,22 @@ static void iommu_table_setparms(struct pci_controller *phb,
 	tbl->it_index = 0;
 	tbl->it_blocksize = 16;
 	tbl->it_type = TCE_PCI;
+
+	sw_inval = of_get_property(node, "linux,tce-sw-invalidate-info", NULL);
+	if (sw_inval) {
+		/*
+		 * This property contains information on how to
+		 * invalidate the TCE entry.  The first property is
+		 * the base MMIO address used to invalidate entries.
+		 * The second property tells us the format of the TCE
+		 * invalidate (whether it needs to be shifted) and
+		 * some magic routing info to add to our invalidate
+		 * command.
+		 */
+		tbl->it_index = (unsigned long) ioremap(sw_inval[0], 8);
+		tbl->it_busno = sw_inval[1]; /* overload this with magic */
+		tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE;
+	}
 }
 
 /*
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index 27a4950..948e0e3 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -554,7 +554,10 @@ void __trace_hcall_entry(unsigned long opcode, unsigned long *args)
 		goto out;
 
 	(*depth)++;
+	preempt_disable();
 	trace_hcall_entry(opcode, args);
+	if (opcode == H_CEDE)
+		rcu_idle_enter();
 	(*depth)--;
 
 out:
@@ -575,7 +578,10 @@ void __trace_hcall_exit(long opcode, unsigned long retval,
 		goto out;
 
 	(*depth)++;
+	if (opcode == H_CEDE)
+		rcu_idle_exit();
 	trace_hcall_exit(opcode, retval, retbuf);
+	preempt_enable();
 	(*depth)--;
 
 out:
diff --git a/arch/powerpc/platforms/pseries/nvram.c b/arch/powerpc/platforms/pseries/nvram.c
index a76b228..330a57b 100644
--- a/arch/powerpc/platforms/pseries/nvram.c
+++ b/arch/powerpc/platforms/pseries/nvram.c
@@ -625,6 +625,8 @@ static void oops_to_nvram(struct kmsg_dumper *dumper,
 {
 	static unsigned int oops_count = 0;
 	static bool panicking = false;
+	static DEFINE_SPINLOCK(lock);
+	unsigned long flags;
 	size_t text_len;
 	unsigned int err_type = ERR_TYPE_KERNEL_PANIC_GZ;
 	int rc = -1;
@@ -655,6 +657,9 @@ static void oops_to_nvram(struct kmsg_dumper *dumper,
 	if (clobbering_unread_rtas_event())
 		return;
 
+	if (!spin_trylock_irqsave(&lock, flags))
+		return;
+
 	if (big_oops_buf) {
 		text_len = capture_last_msgs(old_msgs, old_len,
 			new_msgs, new_len, big_oops_buf, big_oops_buf_sz);
@@ -670,4 +675,6 @@ static void oops_to_nvram(struct kmsg_dumper *dumper,
 
 	(void) nvram_write_os_partition(&oops_log_partition, oops_buf,
 		(int) (sizeof(*oops_len) + *oops_len), err_type, ++oops_count);
+
+	spin_unlock_irqrestore(&lock, flags);
 }
diff --git a/arch/powerpc/platforms/pseries/processor_idle.c b/arch/powerpc/platforms/pseries/processor_idle.c
new file mode 100644
index 0000000..085fd3f
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/processor_idle.c
@@ -0,0 +1,329 @@
+/*
+ *  processor_idle - idle state cpuidle driver.
+ *  Adapted from drivers/idle/intel_idle.c and
+ *  drivers/acpi/processor_idle.c
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+#include <linux/cpuidle.h>
+#include <linux/cpu.h>
+
+#include <asm/paca.h>
+#include <asm/reg.h>
+#include <asm/system.h>
+#include <asm/machdep.h>
+#include <asm/firmware.h>
+
+#include "plpar_wrappers.h"
+#include "pseries.h"
+
+struct cpuidle_driver pseries_idle_driver = {
+	.name =		"pseries_idle",
+	.owner =	THIS_MODULE,
+};
+
+#define MAX_IDLE_STATE_COUNT	2
+
+static int max_idle_state = MAX_IDLE_STATE_COUNT - 1;
+static struct cpuidle_device __percpu *pseries_cpuidle_devices;
+static struct cpuidle_state *cpuidle_state_table;
+
+void update_smt_snooze_delay(int snooze)
+{
+	struct cpuidle_driver *drv = cpuidle_get_driver();
+	if (drv)
+		drv->states[0].target_residency = snooze;
+}
+
+static inline void idle_loop_prolog(unsigned long *in_purr, ktime_t *kt_before)
+{
+
+	*kt_before = ktime_get_real();
+	*in_purr = mfspr(SPRN_PURR);
+	/*
+	 * Indicate to the HV that we are idle. Now would be
+	 * a good time to find other work to dispatch.
+	 */
+	get_lppaca()->idle = 1;
+}
+
+static inline  s64 idle_loop_epilog(unsigned long in_purr, ktime_t kt_before)
+{
+	get_lppaca()->wait_state_cycles += mfspr(SPRN_PURR) - in_purr;
+	get_lppaca()->idle = 0;
+
+	return ktime_to_us(ktime_sub(ktime_get_real(), kt_before));
+}
+
+static int snooze_loop(struct cpuidle_device *dev,
+			struct cpuidle_driver *drv,
+			int index)
+{
+	unsigned long in_purr;
+	ktime_t kt_before;
+	unsigned long start_snooze;
+	long snooze = drv->states[0].target_residency;
+
+	idle_loop_prolog(&in_purr, &kt_before);
+
+	if (snooze) {
+		start_snooze = get_tb() + snooze * tb_ticks_per_usec;
+		local_irq_enable();
+		set_thread_flag(TIF_POLLING_NRFLAG);
+
+		while ((snooze < 0) || (get_tb() < start_snooze)) {
+			if (need_resched() || cpu_is_offline(dev->cpu))
+				goto out;
+			ppc64_runlatch_off();
+			HMT_low();
+			HMT_very_low();
+		}
+
+		HMT_medium();
+		clear_thread_flag(TIF_POLLING_NRFLAG);
+		smp_mb();
+		local_irq_disable();
+	}
+
+out:
+	HMT_medium();
+	dev->last_residency =
+		(int)idle_loop_epilog(in_purr, kt_before);
+	return index;
+}
+
+static int dedicated_cede_loop(struct cpuidle_device *dev,
+				struct cpuidle_driver *drv,
+				int index)
+{
+	unsigned long in_purr;
+	ktime_t kt_before;
+
+	idle_loop_prolog(&in_purr, &kt_before);
+	get_lppaca()->donate_dedicated_cpu = 1;
+
+	ppc64_runlatch_off();
+	HMT_medium();
+	cede_processor();
+
+	get_lppaca()->donate_dedicated_cpu = 0;
+	dev->last_residency =
+		(int)idle_loop_epilog(in_purr, kt_before);
+	return index;
+}
+
+static int shared_cede_loop(struct cpuidle_device *dev,
+			struct cpuidle_driver *drv,
+			int index)
+{
+	unsigned long in_purr;
+	ktime_t kt_before;
+
+	idle_loop_prolog(&in_purr, &kt_before);
+
+	/*
+	 * Yield the processor to the hypervisor.  We return if
+	 * an external interrupt occurs (which are driven prior
+	 * to returning here) or if a prod occurs from another
+	 * processor. When returning here, external interrupts
+	 * are enabled.
+	 */
+	cede_processor();
+
+	dev->last_residency =
+		(int)idle_loop_epilog(in_purr, kt_before);
+	return index;
+}
+
+/*
+ * States for dedicated partition case.
+ */
+static struct cpuidle_state dedicated_states[MAX_IDLE_STATE_COUNT] = {
+	{ /* Snooze */
+		.name = "snooze",
+		.desc = "snooze",
+		.flags = CPUIDLE_FLAG_TIME_VALID,
+		.exit_latency = 0,
+		.target_residency = 0,
+		.enter = &snooze_loop },
+	{ /* CEDE */
+		.name = "CEDE",
+		.desc = "CEDE",
+		.flags = CPUIDLE_FLAG_TIME_VALID,
+		.exit_latency = 1,
+		.target_residency = 10,
+		.enter = &dedicated_cede_loop },
+};
+
+/*
+ * States for shared partition case.
+ */
+static struct cpuidle_state shared_states[MAX_IDLE_STATE_COUNT] = {
+	{ /* Shared Cede */
+		.name = "Shared Cede",
+		.desc = "Shared Cede",
+		.flags = CPUIDLE_FLAG_TIME_VALID,
+		.exit_latency = 0,
+		.target_residency = 0,
+		.enter = &shared_cede_loop },
+};
+
+int pseries_notify_cpuidle_add_cpu(int cpu)
+{
+	struct cpuidle_device *dev =
+			per_cpu_ptr(pseries_cpuidle_devices, cpu);
+	if (dev && cpuidle_get_driver()) {
+		cpuidle_disable_device(dev);
+		cpuidle_enable_device(dev);
+	}
+	return 0;
+}
+
+/*
+ * pseries_cpuidle_driver_init()
+ */
+static int pseries_cpuidle_driver_init(void)
+{
+	int idle_state;
+	struct cpuidle_driver *drv = &pseries_idle_driver;
+
+	drv->state_count = 0;
+
+	for (idle_state = 0; idle_state < MAX_IDLE_STATE_COUNT; ++idle_state) {
+
+		if (idle_state > max_idle_state)
+			break;
+
+		/* is the state not enabled? */
+		if (cpuidle_state_table[idle_state].enter == NULL)
+			continue;
+
+		drv->states[drv->state_count] =	/* structure copy */
+			cpuidle_state_table[idle_state];
+
+		if (cpuidle_state_table == dedicated_states)
+			drv->states[drv->state_count].target_residency =
+				__get_cpu_var(smt_snooze_delay);
+
+		drv->state_count += 1;
+	}
+
+	return 0;
+}
+
+/* pseries_idle_devices_uninit(void)
+ * unregister cpuidle devices and de-allocate memory
+ */
+static void pseries_idle_devices_uninit(void)
+{
+	int i;
+	struct cpuidle_device *dev;
+
+	for_each_possible_cpu(i) {
+		dev = per_cpu_ptr(pseries_cpuidle_devices, i);
+		cpuidle_unregister_device(dev);
+	}
+
+	free_percpu(pseries_cpuidle_devices);
+	return;
+}
+
+/* pseries_idle_devices_init()
+ * allocate, initialize and register cpuidle device
+ */
+static int pseries_idle_devices_init(void)
+{
+	int i;
+	struct cpuidle_driver *drv = &pseries_idle_driver;
+	struct cpuidle_device *dev;
+
+	pseries_cpuidle_devices = alloc_percpu(struct cpuidle_device);
+	if (pseries_cpuidle_devices == NULL)
+		return -ENOMEM;
+
+	for_each_possible_cpu(i) {
+		dev = per_cpu_ptr(pseries_cpuidle_devices, i);
+		dev->state_count = drv->state_count;
+		dev->cpu = i;
+		if (cpuidle_register_device(dev)) {
+			printk(KERN_DEBUG \
+				"cpuidle_register_device %d failed!\n", i);
+			return -EIO;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * pseries_idle_probe()
+ * Choose state table for shared versus dedicated partition
+ */
+static int pseries_idle_probe(void)
+{
+
+	if (!firmware_has_feature(FW_FEATURE_SPLPAR))
+		return -ENODEV;
+
+	if (cpuidle_disable != IDLE_NO_OVERRIDE)
+		return -ENODEV;
+
+	if (max_idle_state == 0) {
+		printk(KERN_DEBUG "pseries processor idle disabled.\n");
+		return -EPERM;
+	}
+
+	if (get_lppaca()->shared_proc)
+		cpuidle_state_table = shared_states;
+	else
+		cpuidle_state_table = dedicated_states;
+
+	return 0;
+}
+
+static int __init pseries_processor_idle_init(void)
+{
+	int retval;
+
+	retval = pseries_idle_probe();
+	if (retval)
+		return retval;
+
+	pseries_cpuidle_driver_init();
+	retval = cpuidle_register_driver(&pseries_idle_driver);
+	if (retval) {
+		printk(KERN_DEBUG "Registration of pseries driver failed.\n");
+		return retval;
+	}
+
+	retval = pseries_idle_devices_init();
+	if (retval) {
+		pseries_idle_devices_uninit();
+		cpuidle_unregister_driver(&pseries_idle_driver);
+		return retval;
+	}
+
+	printk(KERN_DEBUG "pseries_idle_driver registered\n");
+
+	return 0;
+}
+
+static void __exit pseries_processor_idle_exit(void)
+{
+
+	pseries_idle_devices_uninit();
+	cpuidle_unregister_driver(&pseries_idle_driver);
+
+	return;
+}
+
+module_init(pseries_processor_idle_init);
+module_exit(pseries_processor_idle_exit);
+
+MODULE_AUTHOR("Deepthi Dharwar <deepthi@linux.vnet.ibm.com>");
+MODULE_DESCRIPTION("Cpuidle driver for POWER");
+MODULE_LICENSE("GPL");
diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h
index 24c7162..9a3dda0 100644
--- a/arch/powerpc/platforms/pseries/pseries.h
+++ b/arch/powerpc/platforms/pseries/pseries.h
@@ -57,4 +57,7 @@ extern struct device_node *dlpar_configure_connector(u32);
 extern int dlpar_attach_node(struct device_node *);
 extern int dlpar_detach_node(struct device_node *);
 
+/* Snooze Delay, pseries_idle */
+DECLARE_PER_CPU(long, smt_snooze_delay);
+
 #endif /* _PSERIES_PSERIES_H */
diff --git a/arch/powerpc/platforms/pseries/pseries_energy.c b/arch/powerpc/platforms/pseries/pseries_energy.c
index c8b3c69..af281dc 100644
--- a/arch/powerpc/platforms/pseries/pseries_energy.c
+++ b/arch/powerpc/platforms/pseries/pseries_energy.c
@@ -15,7 +15,7 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/seq_file.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/cpu.h>
 #include <linux/of.h>
 #include <asm/cputhreads.h>
@@ -184,7 +184,7 @@ static ssize_t get_best_energy_list(char *page, int activate)
 	return s-page;
 }
 
-static ssize_t get_best_energy_data(struct sys_device *dev,
+static ssize_t get_best_energy_data(struct device *dev,
 					char *page, int activate)
 {
 	int rc;
@@ -207,26 +207,26 @@ static ssize_t get_best_energy_data(struct sys_device *dev,
 
 /* Wrapper functions */
 
-static ssize_t cpu_activate_hint_list_show(struct sysdev_class *class,
-			struct sysdev_class_attribute *attr, char *page)
+static ssize_t cpu_activate_hint_list_show(struct device *dev,
+			struct device_attribute *attr, char *page)
 {
 	return get_best_energy_list(page, 1);
 }
 
-static ssize_t cpu_deactivate_hint_list_show(struct sysdev_class *class,
-			struct sysdev_class_attribute *attr, char *page)
+static ssize_t cpu_deactivate_hint_list_show(struct device *dev,
+			struct device_attribute *attr, char *page)
 {
 	return get_best_energy_list(page, 0);
 }
 
-static ssize_t percpu_activate_hint_show(struct sys_device *dev,
-			struct sysdev_attribute *attr, char *page)
+static ssize_t percpu_activate_hint_show(struct device *dev,
+			struct device_attribute *attr, char *page)
 {
 	return get_best_energy_data(dev, page, 1);
 }
 
-static ssize_t percpu_deactivate_hint_show(struct sys_device *dev,
-			struct sysdev_attribute *attr, char *page)
+static ssize_t percpu_deactivate_hint_show(struct device *dev,
+			struct device_attribute *attr, char *page)
 {
 	return get_best_energy_data(dev, page, 0);
 }
@@ -241,48 +241,48 @@ static ssize_t percpu_deactivate_hint_show(struct sys_device *dev,
  *	Per-cpu value of the hint
  */
 
-struct sysdev_class_attribute attr_cpu_activate_hint_list =
-		_SYSDEV_CLASS_ATTR(pseries_activate_hint_list, 0444,
+struct device_attribute attr_cpu_activate_hint_list =
+		__ATTR(pseries_activate_hint_list, 0444,
 		cpu_activate_hint_list_show, NULL);
 
-struct sysdev_class_attribute attr_cpu_deactivate_hint_list =
-		_SYSDEV_CLASS_ATTR(pseries_deactivate_hint_list, 0444,
+struct device_attribute attr_cpu_deactivate_hint_list =
+		__ATTR(pseries_deactivate_hint_list, 0444,
 		cpu_deactivate_hint_list_show, NULL);
 
-struct sysdev_attribute attr_percpu_activate_hint =
-		_SYSDEV_ATTR(pseries_activate_hint, 0444,
+struct device_attribute attr_percpu_activate_hint =
+		__ATTR(pseries_activate_hint, 0444,
 		percpu_activate_hint_show, NULL);
 
-struct sysdev_attribute attr_percpu_deactivate_hint =
-		_SYSDEV_ATTR(pseries_deactivate_hint, 0444,
+struct device_attribute attr_percpu_deactivate_hint =
+		__ATTR(pseries_deactivate_hint, 0444,
 		percpu_deactivate_hint_show, NULL);
 
 static int __init pseries_energy_init(void)
 {
 	int cpu, err;
-	struct sys_device *cpu_sys_dev;
+	struct device *cpu_dev;
 
 	if (!check_for_h_best_energy()) {
 		printk(KERN_INFO "Hypercall H_BEST_ENERGY not supported\n");
 		return 0;
 	}
 	/* Create the sysfs files */
-	err = sysfs_create_file(&cpu_sysdev_class.kset.kobj,
-				&attr_cpu_activate_hint_list.attr);
+	err = device_create_file(cpu_subsys.dev_root,
+				&attr_cpu_activate_hint_list);
 	if (!err)
-		err = sysfs_create_file(&cpu_sysdev_class.kset.kobj,
-				&attr_cpu_deactivate_hint_list.attr);
+		err = device_create_file(cpu_subsys.dev_root,
+				&attr_cpu_deactivate_hint_list);
 
 	if (err)
 		return err;
 	for_each_possible_cpu(cpu) {
-		cpu_sys_dev = get_cpu_sysdev(cpu);
-		err = sysfs_create_file(&cpu_sys_dev->kobj,
-				&attr_percpu_activate_hint.attr);
+		cpu_dev = get_cpu_device(cpu);
+		err = device_create_file(cpu_dev,
+				&attr_percpu_activate_hint);
 		if (err)
 			break;
-		err = sysfs_create_file(&cpu_sys_dev->kobj,
-				&attr_percpu_deactivate_hint.attr);
+		err = device_create_file(cpu_dev,
+				&attr_percpu_deactivate_hint);
 		if (err)
 			break;
 	}
@@ -298,23 +298,20 @@ static int __init pseries_energy_init(void)
 static void __exit pseries_energy_cleanup(void)
 {
 	int cpu;
-	struct sys_device *cpu_sys_dev;
+	struct device *cpu_dev;
 
 	if (!sysfs_entries)
 		return;
 
 	/* Remove the sysfs files */
-	sysfs_remove_file(&cpu_sysdev_class.kset.kobj,
-				&attr_cpu_activate_hint_list.attr);
-
-	sysfs_remove_file(&cpu_sysdev_class.kset.kobj,
-				&attr_cpu_deactivate_hint_list.attr);
+	device_remove_file(cpu_subsys.dev_root, &attr_cpu_activate_hint_list);
+	device_remove_file(cpu_subsys.dev_root, &attr_cpu_deactivate_hint_list);
 
 	for_each_possible_cpu(cpu) {
-		cpu_sys_dev = get_cpu_sysdev(cpu);
-		sysfs_remove_file(&cpu_sys_dev->kobj,
+		cpu_dev = get_cpu_device(cpu);
+		sysfs_remove_file(&cpu_dev->kobj,
 				&attr_percpu_activate_hint.attr);
-		sysfs_remove_file(&cpu_sys_dev->kobj,
+		sysfs_remove_file(&cpu_dev->kobj,
 				&attr_percpu_deactivate_hint.attr);
 	}
 }
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index c3408ca..f79f127 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -39,6 +39,7 @@
 #include <linux/irq.h>
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
+#include <linux/cpuidle.h>
 
 #include <asm/mmu.h>
 #include <asm/processor.h>
@@ -74,9 +75,6 @@ EXPORT_SYMBOL(CMO_PageSize);
 
 int fwnmi_active;  /* TRUE if an FWNMI handler is present */
 
-static void pseries_shared_idle_sleep(void);
-static void pseries_dedicated_idle_sleep(void);
-
 static struct device_node *pSeries_mpic_node;
 
 static void pSeries_show_cpuinfo(struct seq_file *m)
@@ -192,8 +190,7 @@ static void __init pseries_mpic_init_IRQ(void)
 	BUG_ON(openpic_addr == 0);
 
 	/* Setup the openpic driver */
-	mpic = mpic_alloc(pSeries_mpic_node, openpic_addr,
-			  MPIC_PRIMARY,
+	mpic = mpic_alloc(pSeries_mpic_node, openpic_addr, 0,
 			  16, 250, /* isu size, irq count */
 			  " MPIC     ");
 	BUG_ON(mpic == NULL);
@@ -352,8 +349,25 @@ static int alloc_dispatch_log_kmem_cache(void)
 }
 early_initcall(alloc_dispatch_log_kmem_cache);
 
+static void pSeries_idle(void)
+{
+	/* This would call on the cpuidle framework, and the back-end pseries
+	 * driver to  go to idle states
+	 */
+	if (cpuidle_idle_call()) {
+		/* On error, execute default handler
+		 * to go into low thread priority and possibly
+		 * low power mode.
+		 */
+		HMT_low();
+		HMT_very_low();
+	}
+}
+
 static void __init pSeries_setup_arch(void)
 {
+	panic_timeout = 10;
+
 	/* Discover PIC type and setup ppc_md accordingly */
 	pseries_discover_pic();
 
@@ -374,18 +388,9 @@ static void __init pSeries_setup_arch(void)
 
 	pSeries_nvram_init();
 
-	/* Choose an idle loop */
 	if (firmware_has_feature(FW_FEATURE_SPLPAR)) {
 		vpa_init(boot_cpuid);
-		if (get_lppaca()->shared_proc) {
-			printk(KERN_DEBUG "Using shared processor idle loop\n");
-			ppc_md.power_save = pseries_shared_idle_sleep;
-		} else {
-			printk(KERN_DEBUG "Using dedicated idle loop\n");
-			ppc_md.power_save = pseries_dedicated_idle_sleep;
-		}
-	} else {
-		printk(KERN_DEBUG "Using default idle loop\n");
+		ppc_md.power_save = pSeries_idle;
 	}
 
 	if (firmware_has_feature(FW_FEATURE_LPAR))
@@ -586,80 +591,6 @@ static int __init pSeries_probe(void)
 	return 1;
 }
 
-
-DECLARE_PER_CPU(long, smt_snooze_delay);
-
-static void pseries_dedicated_idle_sleep(void)
-{ 
-	unsigned int cpu = smp_processor_id();
-	unsigned long start_snooze;
-	unsigned long in_purr, out_purr;
-	long snooze = __get_cpu_var(smt_snooze_delay);
-
-	/*
-	 * Indicate to the HV that we are idle. Now would be
-	 * a good time to find other work to dispatch.
-	 */
-	get_lppaca()->idle = 1;
-	get_lppaca()->donate_dedicated_cpu = 1;
-	in_purr = mfspr(SPRN_PURR);
-
-	/*
-	 * We come in with interrupts disabled, and need_resched()
-	 * has been checked recently.  If we should poll for a little
-	 * while, do so.
-	 */
-	if (snooze) {
-		start_snooze = get_tb() + snooze * tb_ticks_per_usec;
-		local_irq_enable();
-		set_thread_flag(TIF_POLLING_NRFLAG);
-
-		while ((snooze < 0) || (get_tb() < start_snooze)) {
-			if (need_resched() || cpu_is_offline(cpu))
-				goto out;
-			ppc64_runlatch_off();
-			HMT_low();
-			HMT_very_low();
-		}
-
-		HMT_medium();
-		clear_thread_flag(TIF_POLLING_NRFLAG);
-		smp_mb();
-		local_irq_disable();
-		if (need_resched() || cpu_is_offline(cpu))
-			goto out;
-	}
-
-	cede_processor();
-
-out:
-	HMT_medium();
-	out_purr = mfspr(SPRN_PURR);
-	get_lppaca()->wait_state_cycles += out_purr - in_purr;
-	get_lppaca()->donate_dedicated_cpu = 0;
-	get_lppaca()->idle = 0;
-}
-
-static void pseries_shared_idle_sleep(void)
-{
-	/*
-	 * Indicate to the HV that we are idle. Now would be
-	 * a good time to find other work to dispatch.
-	 */
-	get_lppaca()->idle = 1;
-
-	/*
-	 * Yield the processor to the hypervisor.  We return if
-	 * an external interrupt occurs (which are driven prior
-	 * to returning here) or if a prod occurs from another
-	 * processor. When returning here, external interrupts
-	 * are enabled.
-	 */
-	cede_processor();
-
-	get_lppaca()->idle = 0;
-}
-
 static int pSeries_pci_probe_mode(struct pci_bus *bus)
 {
 	if (firmware_has_feature(FW_FEATURE_LPAR))
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index 26e93fd..eadba95 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -22,7 +22,7 @@
 #include <linux/spinlock.h>
 #include <linux/cache.h>
 #include <linux/err.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/cpu.h>
 
 #include <asm/ptrace.h>
@@ -148,6 +148,7 @@ static void __devinit smp_xics_setup_cpu(int cpu)
 	set_cpu_current_state(cpu, CPU_STATE_ONLINE);
 	set_default_offline_state(cpu);
 #endif
+	pseries_notify_cpuidle_add_cpu(cpu);
 }
 
 static int __devinit smp_pSeries_kick_cpu(int nr)
diff --git a/arch/powerpc/platforms/pseries/suspend.c b/arch/powerpc/platforms/pseries/suspend.c
index d3de084..b84a8b2 100644
--- a/arch/powerpc/platforms/pseries/suspend.c
+++ b/arch/powerpc/platforms/pseries/suspend.c
@@ -26,7 +26,7 @@
 #include <asm/rtas.h>
 
 static u64 stream_id;
-static struct sys_device suspend_sysdev;
+static struct device suspend_dev;
 static DECLARE_COMPLETION(suspend_work);
 static struct rtas_suspend_me_data suspend_data;
 static atomic_t suspending;
@@ -110,8 +110,8 @@ static int pseries_prepare_late(void)
 
 /**
  * store_hibernate - Initiate partition hibernation
- * @classdev:	sysdev class struct
- * @attr:		class device attribute struct
+ * @dev:		subsys root device
+ * @attr:		device attribute struct
  * @buf:		buffer
  * @count:		buffer size
  *
@@ -121,8 +121,8 @@ static int pseries_prepare_late(void)
  * Return value:
  * 	number of bytes printed to buffer / other on failure
  **/
-static ssize_t store_hibernate(struct sysdev_class *classdev,
-			       struct sysdev_class_attribute *attr,
+static ssize_t store_hibernate(struct device *dev,
+			       struct device_attribute *attr,
 			       const char *buf, size_t count)
 {
 	int rc;
@@ -148,10 +148,11 @@ static ssize_t store_hibernate(struct sysdev_class *classdev,
 	return rc;
 }
 
-static SYSDEV_CLASS_ATTR(hibernate, S_IWUSR, NULL, store_hibernate);
+static DEVICE_ATTR(hibernate, S_IWUSR, NULL, store_hibernate);
 
-static struct sysdev_class suspend_sysdev_class = {
+static struct bus_type suspend_subsys = {
 	.name = "power",
+	.dev_name = "power",
 };
 
 static const struct platform_suspend_ops pseries_suspend_ops = {
@@ -167,23 +168,23 @@ static const struct platform_suspend_ops pseries_suspend_ops = {
  * Return value:
  * 	0 on success / other on failure
  **/
-static int pseries_suspend_sysfs_register(struct sys_device *sysdev)
+static int pseries_suspend_sysfs_register(struct device *dev)
 {
 	int rc;
 
-	if ((rc = sysdev_class_register(&suspend_sysdev_class)))
+	if ((rc = subsys_system_register(&suspend_subsys, NULL)))
 		return rc;
 
-	sysdev->id = 0;
-	sysdev->cls = &suspend_sysdev_class;
+	dev->id = 0;
+	dev->bus = &suspend_subsys;
 
-	if ((rc = sysdev_class_create_file(&suspend_sysdev_class, &attr_hibernate)))
-		goto class_unregister;
+	if ((rc = device_create_file(suspend_subsys.dev_root, &dev_attr_hibernate)))
+		goto subsys_unregister;
 
 	return 0;
 
-class_unregister:
-	sysdev_class_unregister(&suspend_sysdev_class);
+subsys_unregister:
+	bus_unregister(&suspend_subsys);
 	return rc;
 }
 
@@ -204,7 +205,7 @@ static int __init pseries_suspend_init(void)
 	if (suspend_data.token == RTAS_UNKNOWN_SERVICE)
 		return 0;
 
-	if ((rc = pseries_suspend_sysfs_register(&suspend_sysdev)))
+	if ((rc = pseries_suspend_sysfs_register(&suspend_dev)))
 		return rc;
 
 	ppc_md.suspend_disable_cpu = pseries_suspend_cpu;
diff --git a/arch/powerpc/platforms/wsp/Kconfig b/arch/powerpc/platforms/wsp/Kconfig
index bd560c7..57d22a2 100644
--- a/arch/powerpc/platforms/wsp/Kconfig
+++ b/arch/powerpc/platforms/wsp/Kconfig
@@ -1,20 +1,28 @@
 config PPC_WSP
 	bool
 	select PPC_A2
+	select GENERIC_TBSYNC
+	select PPC_ICSWX
 	select PPC_SCOM
 	select PPC_XICS
 	select PPC_ICP_NATIVE
 	select PCI
 	select PPC_IO_WORKAROUNDS if PCI
 	select PPC_INDIRECT_PIO if PCI
+	select PPC_WSP_COPRO
 	default n
 
 menu "WSP platform selection"
 	depends on PPC_BOOK3E_64
 
 config PPC_PSR2
-	bool "PSR-2 platform"
-	select GENERIC_TBSYNC
+	bool "PowerEN System Reference Platform 2"
+	select EPAPR_BOOT
+	select PPC_WSP
+	default y
+
+config PPC_CHROMA
+	bool "PowerEN PCIe Chroma Card"
 	select EPAPR_BOOT
 	select PPC_WSP
 	default y
diff --git a/arch/powerpc/platforms/wsp/Makefile b/arch/powerpc/platforms/wsp/Makefile
index a1486b4..56817ac 100644
--- a/arch/powerpc/platforms/wsp/Makefile
+++ b/arch/powerpc/platforms/wsp/Makefile
@@ -1,8 +1,10 @@
 ccflags-y			+= -mno-minimal-toc
 
-obj-y				+= setup.o ics.o
-obj-$(CONFIG_PPC_PSR2)		+= psr2.o opb_pic.o
+obj-y				+= setup.o ics.o wsp.o
+obj-$(CONFIG_PPC_PSR2)		+= psr2.o
+obj-$(CONFIG_PPC_CHROMA)	+= chroma.o h8.o
+obj-$(CONFIG_PPC_WSP)		+= opb_pic.o
 obj-$(CONFIG_PPC_WSP)		+= scom_wsp.o
 obj-$(CONFIG_SMP)		+= smp.o scom_smp.o
 obj-$(CONFIG_PCI)		+= wsp_pci.o
-obj-$(CONFIG_PCI_MSI)		+= msi.o
\ No newline at end of file
+obj-$(CONFIG_PCI_MSI)		+= msi.o
diff --git a/arch/powerpc/platforms/wsp/chroma.c b/arch/powerpc/platforms/wsp/chroma.c
new file mode 100644
index 0000000..ca6fa26
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/chroma.c
@@ -0,0 +1,56 @@
+/*
+ * Copyright 2008-2011, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/of.h>
+#include <linux/smp.h>
+#include <linux/time.h>
+
+#include <asm/machdep.h>
+#include <asm/system.h>
+#include <asm/udbg.h>
+
+#include "ics.h"
+#include "wsp.h"
+
+void __init chroma_setup_arch(void)
+{
+	wsp_setup_arch();
+	wsp_setup_h8();
+
+}
+
+static int __init chroma_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (!of_flat_dt_is_compatible(root, "ibm,wsp-chroma"))
+		return 0;
+
+	return 1;
+}
+
+define_machine(chroma_md) {
+	.name			= "Chroma PCIe",
+	.probe			= chroma_probe,
+	.setup_arch		= chroma_setup_arch,
+	.restart		= wsp_h8_restart,
+	.power_off		= wsp_h8_power_off,
+	.halt			= wsp_halt,
+	.calibrate_decr		= generic_calibrate_decr,
+	.init_IRQ		= wsp_setup_irq,
+	.progress		= udbg_progress,
+	.power_save		= book3e_idle,
+};
+
+machine_arch_initcall(chroma_md, wsp_probe_devices);
diff --git a/arch/powerpc/platforms/wsp/h8.c b/arch/powerpc/platforms/wsp/h8.c
new file mode 100644
index 0000000..d18e6cc
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/h8.c
@@ -0,0 +1,134 @@
+/*
+ * Copyright 2008-2011, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/io.h>
+
+#include "wsp.h"
+
+/*
+ * The UART connection to the H8 is over ttyS1 which is just a 16550.
+ * We assume that FW has it setup right and no one messes with it.
+ */
+
+
+static u8 __iomem *h8;
+
+#define RBR 0		/* Receiver Buffer Register */
+#define THR 0		/* Transmitter Holding Register */
+#define LSR 5		/* Line Status Register */
+#define LSR_DR 0x01	/* LSR value for Data-Ready */
+#define LSR_THRE 0x20	/* LSR value for Transmitter-Holding-Register-Empty */
+static void wsp_h8_putc(int c)
+{
+	u8 lsr;
+
+	do {
+		lsr = readb(h8 + LSR);
+	} while ((lsr & LSR_THRE) != LSR_THRE);
+	writeb(c, h8 + THR);
+}
+
+static int wsp_h8_getc(void)
+{
+	u8 lsr;
+
+	do {
+		lsr = readb(h8 + LSR);
+	} while ((lsr & LSR_DR) != LSR_DR);
+
+	return readb(h8 + RBR);
+}
+
+static void wsp_h8_puts(const char *s, int sz)
+{
+	int i;
+
+	for (i = 0; i < sz; i++) {
+		wsp_h8_putc(s[i]);
+
+		/* no flow control so wait for echo */
+		wsp_h8_getc();
+	}
+	wsp_h8_putc('\r');
+	wsp_h8_putc('\n');
+}
+
+static void wsp_h8_terminal_cmd(const char *cmd, int sz)
+{
+	hard_irq_disable();
+	wsp_h8_puts(cmd, sz);
+	/* should never return, but just in case */
+	for (;;)
+		continue;
+}
+
+
+void wsp_h8_restart(char *cmd)
+{
+	static const char restart[] = "warm-reset";
+
+	(void)cmd;
+	wsp_h8_terminal_cmd(restart, sizeof(restart) - 1);
+}
+
+void wsp_h8_power_off(void)
+{
+	static const char off[] = "power-off";
+
+	wsp_h8_terminal_cmd(off, sizeof(off) - 1);
+}
+
+static void __iomem *wsp_h8_getaddr(void)
+{
+	struct device_node *aliases;
+	struct device_node *uart;
+	struct property *path;
+	void __iomem *va = NULL;
+
+	/*
+	 * there is nothing in the devtree to tell us which is mapped
+	 * to the H8, but se know it is the second serial port.
+	 */
+
+	aliases = of_find_node_by_path("/aliases");
+	if (aliases == NULL)
+		return NULL;
+
+	path = of_find_property(aliases, "serial1", NULL);
+	if (path == NULL)
+		goto out;
+
+	uart = of_find_node_by_path(path->value);
+	if (uart == NULL)
+		goto out;
+
+	va = of_iomap(uart, 0);
+
+	/* remove it so no one messes with it */
+	of_detach_node(uart);
+	of_node_put(uart);
+
+out:
+	of_node_put(aliases);
+
+	return va;
+}
+
+void __init wsp_setup_h8(void)
+{
+	h8 = wsp_h8_getaddr();
+
+	/* Devtree change? lets hard map it anyway */
+	if (h8 == NULL) {
+		pr_warn("UART to H8 could not be found");
+		h8 = ioremap(0xffc0008000ULL, 0x100);
+	}
+}
diff --git a/arch/powerpc/platforms/wsp/opb_pic.c b/arch/powerpc/platforms/wsp/opb_pic.c
index be05631..19f353d 100644
--- a/arch/powerpc/platforms/wsp/opb_pic.c
+++ b/arch/powerpc/platforms/wsp/opb_pic.c
@@ -320,7 +320,8 @@ void __init opb_pic_init(void)
 		}
 
 		/* Attach opb interrupt handler to new virtual IRQ */
-		rc = request_irq(virq, opb_irq_handler, 0, "OPB LS Cascade", opb);
+		rc = request_irq(virq, opb_irq_handler, IRQF_NO_THREAD,
+				 "OPB LS Cascade", opb);
 		if (rc) {
 			printk("opb: request_irq failed: %d\n", rc);
 			continue;
diff --git a/arch/powerpc/platforms/wsp/psr2.c b/arch/powerpc/platforms/wsp/psr2.c
index 166f2e4..0c1ae06 100644
--- a/arch/powerpc/platforms/wsp/psr2.c
+++ b/arch/powerpc/platforms/wsp/psr2.c
@@ -14,10 +14,10 @@
 #include <linux/mm.h>
 #include <linux/of.h>
 #include <linux/smp.h>
+#include <linux/time.h>
 
 #include <asm/machdep.h>
 #include <asm/system.h>
-#include <asm/time.h>
 #include <asm/udbg.h>
 
 #include "ics.h"
@@ -27,7 +27,8 @@
 static void psr2_spin(void)
 {
 	hard_irq_disable();
-	for (;;) ;
+	for (;;)
+		continue;
 }
 
 static void psr2_restart(char *cmd)
@@ -35,65 +36,32 @@ static void psr2_restart(char *cmd)
 	psr2_spin();
 }
 
-static int psr2_probe_devices(void)
-{
-	struct device_node *np;
-
-	/* Our RTC is a ds1500. It seems to be programatically compatible
-	 * with the ds1511 for which we have a driver so let's use that
-	 */
-	np = of_find_compatible_node(NULL, NULL, "dallas,ds1500");
-	if (np != NULL) {
-		struct resource res;
-		if (of_address_to_resource(np, 0, &res) == 0)
-			platform_device_register_simple("ds1511", 0, &res, 1);
-	}
-	return 0;
-}
-machine_arch_initcall(psr2_md, psr2_probe_devices);
-
-static void __init psr2_setup_arch(void)
-{
-	/* init to some ~sane value until calibrate_delay() runs */
-	loops_per_jiffy = 50000000;
-
-	scom_init_wsp();
-
-	/* Setup SMP callback */
-#ifdef CONFIG_SMP
-	a2_setup_smp();
-#endif
-#ifdef CONFIG_PCI
-	wsp_setup_pci();
-#endif
-
-}
-
 static int __init psr2_probe(void)
 {
 	unsigned long root = of_get_flat_dt_root();
 
+	if (of_flat_dt_is_compatible(root, "ibm,wsp-chroma")) {
+		/* chroma systems also claim they are psr2s */
+		return 0;
+	}
+
 	if (!of_flat_dt_is_compatible(root, "ibm,psr2"))
 		return 0;
 
 	return 1;
 }
 
-static void __init psr2_init_irq(void)
-{
-	wsp_init_irq();
-	opb_pic_init();
-}
-
 define_machine(psr2_md) {
 	.name			= "PSR2 A2",
 	.probe			= psr2_probe,
-	.setup_arch		= psr2_setup_arch,
+	.setup_arch		= wsp_setup_arch,
 	.restart		= psr2_restart,
 	.power_off		= psr2_spin,
 	.halt			= psr2_spin,
 	.calibrate_decr		= generic_calibrate_decr,
-	.init_IRQ		= psr2_init_irq,
+	.init_IRQ		= wsp_setup_irq,
 	.progress		= udbg_progress,
 	.power_save		= book3e_idle,
 };
+
+machine_arch_initcall(psr2_md, wsp_probe_devices);
diff --git a/arch/powerpc/platforms/wsp/wsp.c b/arch/powerpc/platforms/wsp/wsp.c
new file mode 100644
index 0000000..d25cc96
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/wsp.c
@@ -0,0 +1,115 @@
+/*
+ * Copyright 2008-2011, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/smp.h>
+#include <linux/delay.h>
+#include <linux/time.h>
+
+#include <asm/scom.h>
+
+#include "wsp.h"
+#include "ics.h"
+
+#define WSP_SOC_COMPATIBLE	"ibm,wsp-soc"
+#define PBIC_COMPATIBLE		"ibm,wsp-pbic"
+#define COPRO_COMPATIBLE	"ibm,wsp-coprocessor"
+
+static int __init wsp_probe_buses(void)
+{
+	static __initdata struct of_device_id bus_ids[] = {
+		/*
+		 * every node in between needs to be here or you won't
+		 * find it
+		 */
+		{ .compatible = WSP_SOC_COMPATIBLE, },
+		{ .compatible = PBIC_COMPATIBLE, },
+		{ .compatible = COPRO_COMPATIBLE, },
+		{},
+	};
+	of_platform_bus_probe(NULL, bus_ids, NULL);
+
+	return 0;
+}
+
+void __init wsp_setup_arch(void)
+{
+	/* init to some ~sane value until calibrate_delay() runs */
+	loops_per_jiffy = 50000000;
+
+	scom_init_wsp();
+
+	/* Setup SMP callback */
+#ifdef CONFIG_SMP
+	a2_setup_smp();
+#endif
+#ifdef CONFIG_PCI
+	wsp_setup_pci();
+#endif
+}
+
+void __init wsp_setup_irq(void)
+{
+	wsp_init_irq();
+	opb_pic_init();
+}
+
+
+int __init wsp_probe_devices(void)
+{
+	struct device_node *np;
+
+	/* Our RTC is a ds1500. It seems to be programatically compatible
+	 * with the ds1511 for which we have a driver so let's use that
+	 */
+	np = of_find_compatible_node(NULL, NULL, "dallas,ds1500");
+	if (np != NULL) {
+		struct resource res;
+		if (of_address_to_resource(np, 0, &res) == 0)
+			platform_device_register_simple("ds1511", 0, &res, 1);
+	}
+
+	wsp_probe_buses();
+
+	return 0;
+}
+
+void wsp_halt(void)
+{
+	u64 val;
+	scom_map_t m;
+	struct device_node *dn;
+	struct device_node *mine;
+	struct device_node *me;
+
+	me = of_get_cpu_node(smp_processor_id(), NULL);
+	mine = scom_find_parent(me);
+
+	/* This will halt all the A2s but not power off the chip */
+	for_each_node_with_property(dn, "scom-controller") {
+		if (dn == mine)
+			continue;
+		m = scom_map(dn, 0, 1);
+
+		/* read-modify-write it so the HW probe does not get
+		 * confused */
+		val = scom_read(m, 0);
+		val |= 1;
+		scom_write(m, 0, val);
+		scom_unmap(m);
+	}
+	m = scom_map(mine, 0, 1);
+	val = scom_read(m, 0);
+	val |= 1;
+	scom_write(m, 0, val);
+	/* should never return */
+	scom_unmap(m);
+}
diff --git a/arch/powerpc/platforms/wsp/wsp.h b/arch/powerpc/platforms/wsp/wsp.h
index 3347981..10c1d1f 100644
--- a/arch/powerpc/platforms/wsp/wsp.h
+++ b/arch/powerpc/platforms/wsp/wsp.h
@@ -6,15 +6,25 @@
 /* Devtree compatible strings for major devices */
 #define PCIE_COMPATIBLE     "ibm,wsp-pciex"
 
+extern void wsp_setup_arch(void);
+extern void wsp_setup_irq(void);
+extern int wsp_probe_devices(void);
+extern void wsp_halt(void);
+
 extern void wsp_setup_pci(void);
 extern void scom_init_wsp(void);
 
 extern void a2_setup_smp(void);
 extern int a2_scom_startup_cpu(unsigned int lcpu, int thr_idx,
 			       struct device_node *np);
-int smp_a2_cpu_bootable(unsigned int nr);
-int __devinit smp_a2_kick_cpu(int nr);
+extern int smp_a2_cpu_bootable(unsigned int nr);
+extern int __devinit smp_a2_kick_cpu(int nr);
+
+extern void opb_pic_init(void);
 
-void opb_pic_init(void);
+/* chroma specific managment */
+extern void wsp_h8_restart(char *cmd);
+extern void wsp_h8_power_off(void);
+extern void __init wsp_setup_h8(void);
 
 #endif /*  __WSP_H */
diff --git a/arch/powerpc/relocs_check.pl b/arch/powerpc/relocs_check.pl
index d257109..7f5b838 100755
--- a/arch/powerpc/relocs_check.pl
+++ b/arch/powerpc/relocs_check.pl
@@ -32,8 +32,18 @@ while (<FD>) {
 	next if (!/\s+R_/);
 
 	# These relocations are okay
-	next if (/R_PPC64_RELATIVE/ or /R_PPC64_NONE/ or
-	         /R_PPC64_ADDR64\s+mach_/);
+	# On PPC64:
+	# 	R_PPC64_RELATIVE, R_PPC64_NONE, R_PPC64_ADDR64
+	# On PPC:
+	# 	R_PPC_RELATIVE, R_PPC_ADDR16_HI, 
+	# 	R_PPC_ADDR16_HA,R_PPC_ADDR16_LO,
+	# 	R_PPC_NONE
+
+	next if (/\bR_PPC64_RELATIVE\b/ or /\bR_PPC64_NONE\b/ or
+	         /\bR_PPC64_ADDR64\s+mach_/);
+	next if (/\bR_PPC_ADDR16_LO\b/ or /\bR_PPC_ADDR16_HI\b/ or
+		 /\bR_PPC_ADDR16_HA\b/ or /\bR_PPC_RELATIVE\b/ or
+		 /\bR_PPC_NONE\b/);
 
 	# If we see this type of relcoation it's an idication that
 	# we /may/ be using an old version of binutils.
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 84e1325..5e37b47 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -17,10 +17,11 @@ obj-$(CONFIG_FSL_SOC)		+= fsl_soc.o
 obj-$(CONFIG_FSL_PCI)		+= fsl_pci.o $(fsl-msi-obj-y)
 obj-$(CONFIG_FSL_PMC)		+= fsl_pmc.o
 obj-$(CONFIG_FSL_LBC)		+= fsl_lbc.o
+obj-$(CONFIG_FSL_IFC)		+= fsl_ifc.o
 obj-$(CONFIG_FSL_GTM)		+= fsl_gtm.o
 obj-$(CONFIG_FSL_85XX_CACHE_SRAM)	+= fsl_85xx_l2ctlr.o fsl_85xx_cache_sram.o
 obj-$(CONFIG_SIMPLE_GPIO)	+= simple_gpio.o
-obj-$(CONFIG_FSL_RIO)		+= fsl_rio.o
+obj-$(CONFIG_FSL_RIO)		+= fsl_rio.o fsl_rmu.o
 obj-$(CONFIG_TSI108_BRIDGE)	+= tsi108_pci.o tsi108_dev.o
 obj-$(CONFIG_QUICC_ENGINE)	+= qe_lib/
 obj-$(CONFIG_PPC_BESTCOMM)	+= bestcomm/
diff --git a/arch/powerpc/sysdev/axonram.c b/arch/powerpc/sysdev/axonram.c
index ba42719..1c16141 100644
--- a/arch/powerpc/sysdev/axonram.c
+++ b/arch/powerpc/sysdev/axonram.c
@@ -25,7 +25,6 @@
 
 #include <linux/bio.h>
 #include <linux/blkdev.h>
-#include <linux/buffer_head.h>
 #include <linux/device.h>
 #include <linux/errno.h>
 #include <linux/fs.h>
diff --git a/arch/powerpc/sysdev/fsl_ifc.c b/arch/powerpc/sysdev/fsl_ifc.c
new file mode 100644
index 0000000..b31f19f
--- /dev/null
+++ b/arch/powerpc/sysdev/fsl_ifc.c
@@ -0,0 +1,310 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc
+ *
+ * Freescale Integrated Flash Controller
+ *
+ * Author: Dipen Dudhat <Dipen.Dudhat@freescale.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/compiler.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <asm/prom.h>
+#include <asm/fsl_ifc.h>
+
+struct fsl_ifc_ctrl *fsl_ifc_ctrl_dev;
+EXPORT_SYMBOL(fsl_ifc_ctrl_dev);
+
+/*
+ * convert_ifc_address - convert the base address
+ * @addr_base:	base address of the memory bank
+ */
+unsigned int convert_ifc_address(phys_addr_t addr_base)
+{
+	return addr_base & CSPR_BA;
+}
+EXPORT_SYMBOL(convert_ifc_address);
+
+/*
+ * fsl_ifc_find - find IFC bank
+ * @addr_base:	base address of the memory bank
+ *
+ * This function walks IFC banks comparing "Base address" field of the CSPR
+ * registers with the supplied addr_base argument. When bases match this
+ * function returns bank number (starting with 0), otherwise it returns
+ * appropriate errno value.
+ */
+int fsl_ifc_find(phys_addr_t addr_base)
+{
+	int i = 0;
+
+	if (!fsl_ifc_ctrl_dev || !fsl_ifc_ctrl_dev->regs)
+		return -ENODEV;
+
+	for (i = 0; i < ARRAY_SIZE(fsl_ifc_ctrl_dev->regs->cspr_cs); i++) {
+		__be32 cspr = in_be32(&fsl_ifc_ctrl_dev->regs->cspr_cs[i].cspr);
+		if (cspr & CSPR_V && (cspr & CSPR_BA) ==
+				convert_ifc_address(addr_base))
+			return i;
+	}
+
+	return -ENOENT;
+}
+EXPORT_SYMBOL(fsl_ifc_find);
+
+static int __devinit fsl_ifc_ctrl_init(struct fsl_ifc_ctrl *ctrl)
+{
+	struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+
+	/*
+	 * Clear all the common status and event registers
+	 */
+	if (in_be32(&ifc->cm_evter_stat) & IFC_CM_EVTER_STAT_CSER)
+		out_be32(&ifc->cm_evter_stat, IFC_CM_EVTER_STAT_CSER);
+
+	/* enable all error and events */
+	out_be32(&ifc->cm_evter_en, IFC_CM_EVTER_EN_CSEREN);
+
+	/* enable all error and event interrupts */
+	out_be32(&ifc->cm_evter_intr_en, IFC_CM_EVTER_INTR_EN_CSERIREN);
+	out_be32(&ifc->cm_erattr0, 0x0);
+	out_be32(&ifc->cm_erattr1, 0x0);
+
+	return 0;
+}
+
+static int fsl_ifc_ctrl_remove(struct platform_device *dev)
+{
+	struct fsl_ifc_ctrl *ctrl = dev_get_drvdata(&dev->dev);
+
+	free_irq(ctrl->nand_irq, ctrl);
+	free_irq(ctrl->irq, ctrl);
+
+	irq_dispose_mapping(ctrl->nand_irq);
+	irq_dispose_mapping(ctrl->irq);
+
+	iounmap(ctrl->regs);
+
+	dev_set_drvdata(&dev->dev, NULL);
+	kfree(ctrl);
+
+	return 0;
+}
+
+/*
+ * NAND events are split between an operational interrupt which only
+ * receives OPC, and an error interrupt that receives everything else,
+ * including non-NAND errors.  Whichever interrupt gets to it first
+ * records the status and wakes the wait queue.
+ */
+static DEFINE_SPINLOCK(nand_irq_lock);
+
+static u32 check_nand_stat(struct fsl_ifc_ctrl *ctrl)
+{
+	struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+	unsigned long flags;
+	u32 stat;
+
+	spin_lock_irqsave(&nand_irq_lock, flags);
+
+	stat = in_be32(&ifc->ifc_nand.nand_evter_stat);
+	if (stat) {
+		out_be32(&ifc->ifc_nand.nand_evter_stat, stat);
+		ctrl->nand_stat = stat;
+		wake_up(&ctrl->nand_wait);
+	}
+
+	spin_unlock_irqrestore(&nand_irq_lock, flags);
+
+	return stat;
+}
+
+static irqreturn_t fsl_ifc_nand_irq(int irqno, void *data)
+{
+	struct fsl_ifc_ctrl *ctrl = data;
+
+	if (check_nand_stat(ctrl))
+		return IRQ_HANDLED;
+
+	return IRQ_NONE;
+}
+
+/*
+ * NOTE: This interrupt is used to report ifc events of various kinds,
+ * such as transaction errors on the chipselects.
+ */
+static irqreturn_t fsl_ifc_ctrl_irq(int irqno, void *data)
+{
+	struct fsl_ifc_ctrl *ctrl = data;
+	struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+	u32 err_axiid, err_srcid, status, cs_err, err_addr;
+	irqreturn_t ret = IRQ_NONE;
+
+	/* read for chip select error */
+	cs_err = in_be32(&ifc->cm_evter_stat);
+	if (cs_err) {
+		dev_err(ctrl->dev, "transaction sent to IFC is not mapped to"
+				"any memory bank 0x%08X\n", cs_err);
+		/* clear the chip select error */
+		out_be32(&ifc->cm_evter_stat, IFC_CM_EVTER_STAT_CSER);
+
+		/* read error attribute registers print the error information */
+		status = in_be32(&ifc->cm_erattr0);
+		err_addr = in_be32(&ifc->cm_erattr1);
+
+		if (status & IFC_CM_ERATTR0_ERTYP_READ)
+			dev_err(ctrl->dev, "Read transaction error"
+				"CM_ERATTR0 0x%08X\n", status);
+		else
+			dev_err(ctrl->dev, "Write transaction error"
+				"CM_ERATTR0 0x%08X\n", status);
+
+		err_axiid = (status & IFC_CM_ERATTR0_ERAID) >>
+					IFC_CM_ERATTR0_ERAID_SHIFT;
+		dev_err(ctrl->dev, "AXI ID of the error"
+					"transaction 0x%08X\n", err_axiid);
+
+		err_srcid = (status & IFC_CM_ERATTR0_ESRCID) >>
+					IFC_CM_ERATTR0_ESRCID_SHIFT;
+		dev_err(ctrl->dev, "SRC ID of the error"
+					"transaction 0x%08X\n", err_srcid);
+
+		dev_err(ctrl->dev, "Transaction Address corresponding to error"
+					"ERADDR 0x%08X\n", err_addr);
+
+		ret = IRQ_HANDLED;
+	}
+
+	if (check_nand_stat(ctrl))
+		ret = IRQ_HANDLED;
+
+	return ret;
+}
+
+/*
+ * fsl_ifc_ctrl_probe
+ *
+ * called by device layer when it finds a device matching
+ * one our driver can handled. This code allocates all of
+ * the resources needed for the controller only.  The
+ * resources for the NAND banks themselves are allocated
+ * in the chip probe function.
+*/
+static int __devinit fsl_ifc_ctrl_probe(struct platform_device *dev)
+{
+	int ret = 0;
+
+
+	dev_info(&dev->dev, "Freescale Integrated Flash Controller\n");
+
+	fsl_ifc_ctrl_dev = kzalloc(sizeof(*fsl_ifc_ctrl_dev), GFP_KERNEL);
+	if (!fsl_ifc_ctrl_dev)
+		return -ENOMEM;
+
+	dev_set_drvdata(&dev->dev, fsl_ifc_ctrl_dev);
+
+	/* IOMAP the entire IFC region */
+	fsl_ifc_ctrl_dev->regs = of_iomap(dev->dev.of_node, 0);
+	if (!fsl_ifc_ctrl_dev->regs) {
+		dev_err(&dev->dev, "failed to get memory region\n");
+		ret = -ENODEV;
+		goto err;
+	}
+
+	/* get the Controller level irq */
+	fsl_ifc_ctrl_dev->irq = irq_of_parse_and_map(dev->dev.of_node, 0);
+	if (fsl_ifc_ctrl_dev->irq == NO_IRQ) {
+		dev_err(&dev->dev, "failed to get irq resource "
+							"for IFC\n");
+		ret = -ENODEV;
+		goto err;
+	}
+
+	/* get the nand machine irq */
+	fsl_ifc_ctrl_dev->nand_irq =
+			irq_of_parse_and_map(dev->dev.of_node, 1);
+	if (fsl_ifc_ctrl_dev->nand_irq == NO_IRQ) {
+		dev_err(&dev->dev, "failed to get irq resource "
+						"for NAND Machine\n");
+		ret = -ENODEV;
+		goto err;
+	}
+
+	fsl_ifc_ctrl_dev->dev = &dev->dev;
+
+	ret = fsl_ifc_ctrl_init(fsl_ifc_ctrl_dev);
+	if (ret < 0)
+		goto err;
+
+	init_waitqueue_head(&fsl_ifc_ctrl_dev->nand_wait);
+
+	ret = request_irq(fsl_ifc_ctrl_dev->irq, fsl_ifc_ctrl_irq, IRQF_SHARED,
+			  "fsl-ifc", fsl_ifc_ctrl_dev);
+	if (ret != 0) {
+		dev_err(&dev->dev, "failed to install irq (%d)\n",
+			fsl_ifc_ctrl_dev->irq);
+		goto err_irq;
+	}
+
+	ret = request_irq(fsl_ifc_ctrl_dev->nand_irq, fsl_ifc_nand_irq, 0,
+			  "fsl-ifc-nand", fsl_ifc_ctrl_dev);
+	if (ret != 0) {
+		dev_err(&dev->dev, "failed to install irq (%d)\n",
+			fsl_ifc_ctrl_dev->nand_irq);
+		goto err_nandirq;
+	}
+
+	return 0;
+
+err_nandirq:
+	free_irq(fsl_ifc_ctrl_dev->nand_irq, fsl_ifc_ctrl_dev);
+	irq_dispose_mapping(fsl_ifc_ctrl_dev->nand_irq);
+err_irq:
+	free_irq(fsl_ifc_ctrl_dev->irq, fsl_ifc_ctrl_dev);
+	irq_dispose_mapping(fsl_ifc_ctrl_dev->irq);
+err:
+	return ret;
+}
+
+static const struct of_device_id fsl_ifc_match[] = {
+	{
+		.compatible = "fsl,ifc",
+	},
+	{},
+};
+
+static struct platform_driver fsl_ifc_ctrl_driver = {
+	.driver = {
+		.name	= "fsl-ifc",
+		.of_match_table = fsl_ifc_match,
+	},
+	.probe       = fsl_ifc_ctrl_probe,
+	.remove      = fsl_ifc_ctrl_remove,
+};
+
+module_platform_driver(fsl_ifc_ctrl_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Freescale Semiconductor");
+MODULE_DESCRIPTION("Freescale Integrated Flash Controller driver");
diff --git a/arch/powerpc/sysdev/fsl_lbc.c b/arch/powerpc/sysdev/fsl_lbc.c
index d5c3c90..483126d 100644
--- a/arch/powerpc/sysdev/fsl_lbc.c
+++ b/arch/powerpc/sysdev/fsl_lbc.c
@@ -332,6 +332,38 @@ err:
 	return ret;
 }
 
+#ifdef CONFIG_SUSPEND
+
+/* save lbc registers */
+static int fsl_lbc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct fsl_lbc_ctrl *ctrl = dev_get_drvdata(&pdev->dev);
+	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+
+	ctrl->saved_regs = kmalloc(sizeof(struct fsl_lbc_regs), GFP_KERNEL);
+	if (!ctrl->saved_regs)
+		return -ENOMEM;
+
+	_memcpy_fromio(ctrl->saved_regs, lbc, sizeof(struct fsl_lbc_regs));
+	return 0;
+}
+
+/* restore lbc registers */
+static int fsl_lbc_resume(struct platform_device *pdev)
+{
+	struct fsl_lbc_ctrl *ctrl = dev_get_drvdata(&pdev->dev);
+	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+
+	if (ctrl->saved_regs) {
+		_memcpy_toio(lbc, ctrl->saved_regs,
+				sizeof(struct fsl_lbc_regs));
+		kfree(ctrl->saved_regs);
+		ctrl->saved_regs = NULL;
+	}
+	return 0;
+}
+#endif /* CONFIG_SUSPEND */
+
 static const struct of_device_id fsl_lbc_match[] = {
 	{ .compatible = "fsl,elbc", },
 	{ .compatible = "fsl,pq3-localbus", },
@@ -346,6 +378,10 @@ static struct platform_driver fsl_lbc_ctrl_driver = {
 		.of_match_table = fsl_lbc_match,
 	},
 	.probe = fsl_lbc_ctrl_probe,
+#ifdef CONFIG_SUSPEND
+	.suspend     = fsl_lbc_suspend,
+	.resume      = fsl_lbc_resume,
+#endif
 };
 
 static int __init fsl_lbc_init(void)
diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c
index e5c344d..ecb5c19 100644
--- a/arch/powerpc/sysdev/fsl_msi.c
+++ b/arch/powerpc/sysdev/fsl_msi.c
@@ -23,6 +23,8 @@
 #include <asm/hw_irq.h>
 #include <asm/ppc-pci.h>
 #include <asm/mpic.h>
+#include <asm/fsl_hcalls.h>
+
 #include "fsl_msi.h"
 #include "fsl_pci.h"
 
@@ -148,14 +150,49 @@ static void fsl_compose_msi_msg(struct pci_dev *pdev, int hwirq,
 
 static int fsl_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
 {
+	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
+	struct device_node *np;
+	phandle phandle = 0;
 	int rc, hwirq = -ENOMEM;
 	unsigned int virq;
 	struct msi_desc *entry;
 	struct msi_msg msg;
 	struct fsl_msi *msi_data;
 
+	/*
+	 * If the PCI node has an fsl,msi property, then we need to use it
+	 * to find the specific MSI.
+	 */
+	np = of_parse_phandle(hose->dn, "fsl,msi", 0);
+	if (np) {
+		if (of_device_is_compatible(np, "fsl,mpic-msi") ||
+		    of_device_is_compatible(np, "fsl,vmpic-msi"))
+			phandle = np->phandle;
+		else {
+			dev_err(&pdev->dev,
+				"node %s has an invalid fsl,msi phandle %u\n",
+				hose->dn->full_name, np->phandle);
+			return -EINVAL;
+		}
+	}
+
 	list_for_each_entry(entry, &pdev->msi_list, list) {
+		/*
+		 * Loop over all the MSI devices until we find one that has an
+		 * available interrupt.
+		 */
 		list_for_each_entry(msi_data, &msi_head, list) {
+			/*
+			 * If the PCI node has an fsl,msi property, then we
+			 * restrict our search to the corresponding MSI node.
+			 * The simplest way is to skip over MSI nodes with the
+			 * wrong phandle. Under the Freescale hypervisor, this
+			 * has the additional benefit of skipping over MSI
+			 * nodes that are not mapped in the PAMU.
+			 */
+			if (phandle && (phandle != msi_data->phandle))
+				continue;
+
 			hwirq = msi_bitmap_alloc_hwirqs(&msi_data->bitmap, 1);
 			if (hwirq >= 0)
 				break;
@@ -163,16 +200,14 @@ static int fsl_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
 
 		if (hwirq < 0) {
 			rc = hwirq;
-			pr_debug("%s: fail allocating msi interrupt\n",
-					__func__);
+			dev_err(&pdev->dev, "could not allocate MSI interrupt\n");
 			goto out_free;
 		}
 
 		virq = irq_create_mapping(msi_data->irqhost, hwirq);
 
 		if (virq == NO_IRQ) {
-			pr_debug("%s: fail mapping hwirq 0x%x\n",
-					__func__, hwirq);
+			dev_err(&pdev->dev, "fail mapping hwirq %i\n", hwirq);
 			msi_bitmap_free_hwirqs(&msi_data->bitmap, hwirq, 1);
 			rc = -ENOSPC;
 			goto out_free;
@@ -201,6 +236,7 @@ static void fsl_msi_cascade(unsigned int irq, struct irq_desc *desc)
 	u32 intr_index;
 	u32 have_shift = 0;
 	struct fsl_msi_cascade_data *cascade_data;
+	unsigned int ret;
 
 	cascade_data = irq_get_handler_data(irq);
 	msi_data = cascade_data->msi_data;
@@ -232,6 +268,14 @@ static void fsl_msi_cascade(unsigned int irq, struct irq_desc *desc)
 	case FSL_PIC_IP_IPIC:
 		msir_value = fsl_msi_read(msi_data->msi_regs, msir_index * 0x4);
 		break;
+	case FSL_PIC_IP_VMPIC:
+		ret = fh_vmpic_get_msir(virq_to_hw(irq), &msir_value);
+		if (ret) {
+			pr_err("fsl-msi: fh_vmpic_get_msir() failed for "
+			       "irq %u (ret=%u)\n", irq, ret);
+			msir_value = 0;
+		}
+		break;
 	}
 
 	while (msir_value) {
@@ -249,6 +293,7 @@ static void fsl_msi_cascade(unsigned int irq, struct irq_desc *desc)
 
 	switch (msi_data->feature & FSL_PIC_IP_MASK) {
 	case FSL_PIC_IP_MPIC:
+	case FSL_PIC_IP_VMPIC:
 		chip->irq_eoi(idata);
 		break;
 	case FSL_PIC_IP_IPIC:
@@ -278,7 +323,8 @@ static int fsl_of_msi_remove(struct platform_device *ofdev)
 	}
 	if (msi->bitmap.bitmap)
 		msi_bitmap_free(&msi->bitmap);
-	iounmap(msi->msi_regs);
+	if ((msi->feature & FSL_PIC_IP_MASK) != FSL_PIC_IP_VMPIC)
+		iounmap(msi->msi_regs);
 	kfree(msi);
 
 	return 0;
@@ -350,25 +396,37 @@ static int __devinit fsl_of_msi_probe(struct platform_device *dev)
 		goto error_out;
 	}
 
-	/* Get the MSI reg base */
-	err = of_address_to_resource(dev->dev.of_node, 0, &res);
-	if (err) {
-		dev_err(&dev->dev, "%s resource error!\n",
+	/*
+	 * Under the Freescale hypervisor, the msi nodes don't have a 'reg'
+	 * property.  Instead, we use hypercalls to access the MSI.
+	 */
+	if ((features->fsl_pic_ip & FSL_PIC_IP_MASK) != FSL_PIC_IP_VMPIC) {
+		err = of_address_to_resource(dev->dev.of_node, 0, &res);
+		if (err) {
+			dev_err(&dev->dev, "invalid resource for node %s\n",
 				dev->dev.of_node->full_name);
-		goto error_out;
-	}
+			goto error_out;
+		}
 
-	msi->msi_regs = ioremap(res.start, resource_size(&res));
-	if (!msi->msi_regs) {
-		dev_err(&dev->dev, "ioremap problem failed\n");
-		goto error_out;
+		msi->msi_regs = ioremap(res.start, resource_size(&res));
+		if (!msi->msi_regs) {
+			dev_err(&dev->dev, "could not map node %s\n",
+				dev->dev.of_node->full_name);
+			goto error_out;
+		}
+		msi->msiir_offset =
+			features->msiir_offset + (res.start & 0xfffff);
 	}
 
 	msi->feature = features->fsl_pic_ip;
 
 	msi->irqhost->host_data = msi;
 
-	msi->msiir_offset = features->msiir_offset + (res.start & 0xfffff);
+	/*
+	 * Remember the phandle, so that we can match with any PCI nodes
+	 * that have an "fsl,msi" property.
+	 */
+	msi->phandle = dev->dev.of_node->phandle;
 
 	rc = fsl_msi_init_allocator(msi);
 	if (rc) {
@@ -437,6 +495,11 @@ static const struct fsl_msi_feature ipic_msi_feature = {
 	.msiir_offset = 0x38,
 };
 
+static const struct fsl_msi_feature vmpic_msi_feature = {
+	.fsl_pic_ip = FSL_PIC_IP_VMPIC,
+	.msiir_offset = 0,
+};
+
 static const struct of_device_id fsl_of_msi_ids[] = {
 	{
 		.compatible = "fsl,mpic-msi",
@@ -446,6 +509,10 @@ static const struct of_device_id fsl_of_msi_ids[] = {
 		.compatible = "fsl,ipic-msi",
 		.data = (void *)&ipic_msi_feature,
 	},
+	{
+		.compatible = "fsl,vmpic-msi",
+		.data = (void *)&vmpic_msi_feature,
+	},
 	{}
 };
 
diff --git a/arch/powerpc/sysdev/fsl_msi.h b/arch/powerpc/sysdev/fsl_msi.h
index 1313abb..f6c646a 100644
--- a/arch/powerpc/sysdev/fsl_msi.h
+++ b/arch/powerpc/sysdev/fsl_msi.h
@@ -13,15 +13,17 @@
 #ifndef _POWERPC_SYSDEV_FSL_MSI_H
 #define _POWERPC_SYSDEV_FSL_MSI_H
 
+#include <linux/of.h>
 #include <asm/msi_bitmap.h>
 
 #define NR_MSI_REG		8
 #define IRQS_PER_MSI_REG	32
 #define NR_MSI_IRQS	(NR_MSI_REG * IRQS_PER_MSI_REG)
 
-#define FSL_PIC_IP_MASK	0x0000000F
-#define FSL_PIC_IP_MPIC	0x00000001
-#define FSL_PIC_IP_IPIC	0x00000002
+#define FSL_PIC_IP_MASK   0x0000000F
+#define FSL_PIC_IP_MPIC   0x00000001
+#define FSL_PIC_IP_IPIC   0x00000002
+#define FSL_PIC_IP_VMPIC  0x00000003
 
 struct fsl_msi {
 	struct irq_host *irqhost;
@@ -36,6 +38,8 @@ struct fsl_msi {
 	struct msi_bitmap bitmap;
 
 	struct list_head list;          /* support multiple MSI banks */
+
+	phandle phandle;
 };
 
 #endif /* _POWERPC_SYSDEV_FSL_MSI_H */
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 4ce547e..3b61e8c 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -65,6 +65,30 @@ static int __init fsl_pcie_check_link(struct pci_controller *hose)
 }
 
 #if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx)
+
+#define MAX_PHYS_ADDR_BITS	40
+static u64 pci64_dma_offset = 1ull << MAX_PHYS_ADDR_BITS;
+
+static int fsl_pci_dma_set_mask(struct device *dev, u64 dma_mask)
+{
+	if (!dev->dma_mask || !dma_supported(dev, dma_mask))
+		return -EIO;
+
+	/*
+	 * Fixup PCI devices that are able to DMA to above the physical
+	 * address width of the SoC such that we can address any internal
+	 * SoC address from across PCI if needed
+	 */
+	if ((dev->bus == &pci_bus_type) &&
+	    dma_mask >= DMA_BIT_MASK(MAX_PHYS_ADDR_BITS)) {
+		set_dma_ops(dev, &dma_direct_ops);
+		set_dma_offset(dev, pci64_dma_offset);
+	}
+
+	*dev->dma_mask = dma_mask;
+	return 0;
+}
+
 static int __init setup_one_atmu(struct ccsr_pci __iomem *pci,
 	unsigned int index, const struct resource *res,
 	resource_size_t offset)
@@ -113,6 +137,8 @@ static void __init setup_pci_atmu(struct pci_controller *hose,
 	u32 piwar = PIWAR_EN | PIWAR_PF | PIWAR_TGI_LOCAL |
 			PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP;
 	char *name = hose->dn->full_name;
+	const u64 *reg;
+	int len;
 
 	pr_debug("PCI memory map start 0x%016llx, size 0x%016llx\n",
 		 (u64)rsrc->start, (u64)resource_size(rsrc));
@@ -205,6 +231,33 @@ static void __init setup_pci_atmu(struct pci_controller *hose,
 
 	/* Setup inbound mem window */
 	mem = memblock_end_of_DRAM();
+
+	/*
+	 * The msi-address-64 property, if it exists, indicates the physical
+	 * address of the MSIIR register.  Normally, this register is located
+	 * inside CCSR, so the ATMU that covers all of CCSR is used. But if
+	 * this property exists, then we normally need to create a new ATMU
+	 * for it.  For now, however, we cheat.  The only entity that creates
+	 * this property is the Freescale hypervisor, and the address is
+	 * specified in the partition configuration.  Typically, the address
+	 * is located in the page immediately after the end of DDR.  If so, we
+	 * can avoid allocating a new ATMU by extending the DDR ATMU by one
+	 * page.
+	 */
+	reg = of_get_property(hose->dn, "msi-address-64", &len);
+	if (reg && (len == sizeof(u64))) {
+		u64 address = be64_to_cpup(reg);
+
+		if ((address >= mem) && (address < (mem + PAGE_SIZE))) {
+			pr_info("%s: extending DDR ATMU to cover MSIIR", name);
+			mem += PAGE_SIZE;
+		} else {
+			/* TODO: Create a new ATMU for MSIIR */
+			pr_warn("%s: msi-address-64 address of %llx is "
+				"unsupported\n", name, address);
+		}
+	}
+
 	sz = min(mem, paddr_lo);
 	mem_log = __ilog2_u64(sz);
 
@@ -228,6 +281,37 @@ static void __init setup_pci_atmu(struct pci_controller *hose,
 
 		hose->dma_window_base_cur = 0x00000000;
 		hose->dma_window_size = (resource_size_t)sz;
+
+		/*
+		 * if we have >4G of memory setup second PCI inbound window to
+		 * let devices that are 64-bit address capable to work w/o
+		 * SWIOTLB and access the full range of memory
+		 */
+		if (sz != mem) {
+			mem_log = __ilog2_u64(mem);
+
+			/* Size window up if we dont fit in exact power-of-2 */
+			if ((1ull << mem_log) != mem)
+				mem_log++;
+
+			piwar = (piwar & ~PIWAR_SZ_MASK) | (mem_log - 1);
+
+			/* Setup inbound memory window */
+			out_be32(&pci->piw[win_idx].pitar,  0x00000000);
+			out_be32(&pci->piw[win_idx].piwbear,
+					pci64_dma_offset >> 44);
+			out_be32(&pci->piw[win_idx].piwbar,
+					pci64_dma_offset >> 12);
+			out_be32(&pci->piw[win_idx].piwar,  piwar);
+
+			/*
+			 * install our own dma_set_mask handler to fixup dma_ops
+			 * and dma_offset
+			 */
+			ppc_md.dma_set_mask = fsl_pci_dma_set_mask;
+
+			pr_info("%s: Setup 64-bit PCI DMA window\n", name);
+		}
 	} else {
 		u64 paddr = 0;
 
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index 22ffccd..a4c4f4a 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -10,7 +10,7 @@
  * - Added Port-Write message handling
  * - Added Machine Check exception handling
  *
- * Copyright (C) 2007, 2008, 2010 Freescale Semiconductor, Inc.
+ * Copyright (C) 2007, 2008, 2010, 2011 Freescale Semiconductor, Inc.
  * Zhang Wei <wei.zhang@freescale.com>
  *
  * Copyright 2005 MontaVista Software, Inc.
@@ -28,240 +28,33 @@
 #include <linux/dma-mapping.h>
 #include <linux/interrupt.h>
 #include <linux/device.h>
-#include <linux/rio.h>
-#include <linux/rio_drv.h>
 #include <linux/of_platform.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
-#include <linux/kfifo.h>
 
-#include <asm/io.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 #include <asm/machdep.h>
-#include <asm/uaccess.h>
 
-#undef DEBUG_PW	/* Port-Write debugging */
+#include "fsl_rio.h"
 
-/* RapidIO definition irq, which read from OF-tree */
-#define IRQ_RIO_BELL(m)		(((struct rio_priv *)(m->priv))->bellirq)
-#define IRQ_RIO_TX(m)		(((struct rio_priv *)(m->priv))->txirq)
-#define IRQ_RIO_RX(m)		(((struct rio_priv *)(m->priv))->rxirq)
-#define IRQ_RIO_PW(m)		(((struct rio_priv *)(m->priv))->pwirq)
-
-#define IPWSR_CLEAR		0x98
-#define OMSR_CLEAR		0x1cb3
-#define IMSR_CLEAR		0x491
-#define IDSR_CLEAR		0x91
-#define ODSR_CLEAR		0x1c00
-#define LTLEECSR_ENABLE_ALL	0xFFC000FC
-#define ESCSR_CLEAR		0x07120204
-#define IECSR_CLEAR		0x80000000
+#undef DEBUG_PW	/* Port-Write debugging */
 
 #define RIO_PORT1_EDCSR		0x0640
 #define RIO_PORT2_EDCSR		0x0680
 #define RIO_PORT1_IECSR		0x10130
 #define RIO_PORT2_IECSR		0x101B0
-#define RIO_IM0SR		0x13064
-#define RIO_IM1SR		0x13164
-#define RIO_OM0SR		0x13004
-#define RIO_OM1SR		0x13104
-
-#define RIO_ATMU_REGS_OFFSET	0x10c00
-#define RIO_P_MSG_REGS_OFFSET	0x11000
-#define RIO_S_MSG_REGS_OFFSET	0x13000
+
 #define RIO_GCCSR		0x13c
 #define RIO_ESCSR		0x158
+#define ESCSR_CLEAR		0x07120204
 #define RIO_PORT2_ESCSR		0x178
 #define RIO_CCSR		0x15c
-#define RIO_LTLEDCSR		0x0608
 #define RIO_LTLEDCSR_IER	0x80000000
 #define RIO_LTLEDCSR_PRT	0x01000000
-#define RIO_LTLEECSR		0x060c
-#define RIO_EPWISR		0x10010
+#define IECSR_CLEAR		0x80000000
 #define RIO_ISR_AACR		0x10120
 #define RIO_ISR_AACR_AA		0x1	/* Accept All ID */
-#define RIO_MAINT_WIN_SIZE	0x400000
-#define RIO_DBELL_WIN_SIZE	0x1000
-
-#define RIO_MSG_OMR_MUI		0x00000002
-#define RIO_MSG_OSR_TE		0x00000080
-#define RIO_MSG_OSR_QOI		0x00000020
-#define RIO_MSG_OSR_QFI		0x00000010
-#define RIO_MSG_OSR_MUB		0x00000004
-#define RIO_MSG_OSR_EOMI	0x00000002
-#define RIO_MSG_OSR_QEI		0x00000001
-
-#define RIO_MSG_IMR_MI		0x00000002
-#define RIO_MSG_ISR_TE		0x00000080
-#define RIO_MSG_ISR_QFI		0x00000010
-#define RIO_MSG_ISR_DIQI	0x00000001
-
-#define RIO_IPWMR_SEN		0x00100000
-#define RIO_IPWMR_QFIE		0x00000100
-#define RIO_IPWMR_EIE		0x00000020
-#define RIO_IPWMR_CQ		0x00000002
-#define RIO_IPWMR_PWE		0x00000001
-
-#define RIO_IPWSR_QF		0x00100000
-#define RIO_IPWSR_TE		0x00000080
-#define RIO_IPWSR_QFI		0x00000010
-#define RIO_IPWSR_PWD		0x00000008
-#define RIO_IPWSR_PWB		0x00000004
-
-/* EPWISR Error match value */
-#define RIO_EPWISR_PINT1	0x80000000
-#define RIO_EPWISR_PINT2	0x40000000
-#define RIO_EPWISR_MU		0x00000002
-#define RIO_EPWISR_PW		0x00000001
-
-#define RIO_MSG_DESC_SIZE	32
-#define RIO_MSG_BUFFER_SIZE	4096
-#define RIO_MIN_TX_RING_SIZE	2
-#define RIO_MAX_TX_RING_SIZE	2048
-#define RIO_MIN_RX_RING_SIZE	2
-#define RIO_MAX_RX_RING_SIZE	2048
-
-#define DOORBELL_DMR_DI		0x00000002
-#define DOORBELL_DSR_TE		0x00000080
-#define DOORBELL_DSR_QFI	0x00000010
-#define DOORBELL_DSR_DIQI	0x00000001
-#define DOORBELL_TID_OFFSET	0x02
-#define DOORBELL_SID_OFFSET	0x04
-#define DOORBELL_INFO_OFFSET	0x06
-
-#define DOORBELL_MESSAGE_SIZE	0x08
-#define DBELL_SID(x)		(*(u16 *)(x + DOORBELL_SID_OFFSET))
-#define DBELL_TID(x)		(*(u16 *)(x + DOORBELL_TID_OFFSET))
-#define DBELL_INF(x)		(*(u16 *)(x + DOORBELL_INFO_OFFSET))
-
-struct rio_atmu_regs {
-	u32 rowtar;
-	u32 rowtear;
-	u32 rowbar;
-	u32 pad2;
-	u32 rowar;
-	u32 pad3[3];
-};
-
-struct rio_msg_regs {
-	u32 omr;	/* 0xD_3000 - Outbound message 0 mode register */
-	u32 osr;	/* 0xD_3004 - Outbound message 0 status register */
-	u32 pad1;
-	u32 odqdpar;	/* 0xD_300C - Outbound message 0 descriptor queue
-			   dequeue pointer address register */
-	u32 pad2;
-	u32 osar;	/* 0xD_3014 - Outbound message 0 source address
-			   register */
-	u32 odpr;	/* 0xD_3018 - Outbound message 0 destination port
-			   register */
-	u32 odatr;	/* 0xD_301C - Outbound message 0 destination attributes
-			   Register*/
-	u32 odcr;	/* 0xD_3020 - Outbound message 0 double-word count
-			   register */
-	u32 pad3;
-	u32 odqepar;	/* 0xD_3028 - Outbound message 0 descriptor queue
-			   enqueue pointer address register */
-	u32 pad4[13];
-	u32 imr;	/* 0xD_3060 - Inbound message 0 mode register */
-	u32 isr;	/* 0xD_3064 - Inbound message 0 status register */
-	u32 pad5;
-	u32 ifqdpar;	/* 0xD_306C - Inbound message 0 frame queue dequeue
-			   pointer address register*/
-	u32 pad6;
-	u32 ifqepar;	/* 0xD_3074 - Inbound message 0 frame queue enqueue
-			   pointer address register */
-	u32 pad7[226];
-	u32 odmr;	/* 0xD_3400 - Outbound doorbell mode register */
-	u32 odsr;	/* 0xD_3404 - Outbound doorbell status register */
-	u32 res0[4];
-	u32 oddpr;	/* 0xD_3418 - Outbound doorbell destination port
-			   register */
-	u32 oddatr;	/* 0xD_341c - Outbound doorbell destination attributes
-			   register */
-	u32 res1[3];
-	u32 odretcr;	/* 0xD_342C - Outbound doorbell retry error threshold
-			   configuration register */
-	u32 res2[12];
-	u32 dmr;	/* 0xD_3460 - Inbound doorbell mode register */
-	u32 dsr;	/* 0xD_3464 - Inbound doorbell status register */
-	u32 pad8;
-	u32 dqdpar;	/* 0xD_346C - Inbound doorbell queue dequeue Pointer
-			   address register */
-	u32 pad9;
-	u32 dqepar;	/* 0xD_3474 - Inbound doorbell Queue enqueue pointer
-			   address register */
-	u32 pad10[26];
-	u32 pwmr;	/* 0xD_34E0 - Inbound port-write mode register */
-	u32 pwsr;	/* 0xD_34E4 - Inbound port-write status register */
-	u32 epwqbar;	/* 0xD_34E8 - Extended Port-Write Queue Base Address
-			   register */
-	u32 pwqbar;	/* 0xD_34EC - Inbound port-write queue base address
-			   register */
-};
-
-struct rio_tx_desc {
-	u32 res1;
-	u32 saddr;
-	u32 dport;
-	u32 dattr;
-	u32 res2;
-	u32 res3;
-	u32 dwcnt;
-	u32 res4;
-};
-
-struct rio_dbell_ring {
-	void *virt;
-	dma_addr_t phys;
-};
-
-struct rio_msg_tx_ring {
-	void *virt;
-	dma_addr_t phys;
-	void *virt_buffer[RIO_MAX_TX_RING_SIZE];
-	dma_addr_t phys_buffer[RIO_MAX_TX_RING_SIZE];
-	int tx_slot;
-	int size;
-	void *dev_id;
-};
-
-struct rio_msg_rx_ring {
-	void *virt;
-	dma_addr_t phys;
-	void *virt_buffer[RIO_MAX_RX_RING_SIZE];
-	int rx_slot;
-	int size;
-	void *dev_id;
-};
-
-struct rio_port_write_msg {
-	void *virt;
-	dma_addr_t phys;
-	u32 msg_count;
-	u32 err_count;
-	u32 discard_count;
-};
-
-struct rio_priv {
-	struct device *dev;
-	void __iomem *regs_win;
-	struct rio_atmu_regs __iomem *atmu_regs;
-	struct rio_atmu_regs __iomem *maint_atmu_regs;
-	struct rio_atmu_regs __iomem *dbell_atmu_regs;
-	void __iomem *dbell_win;
-	void __iomem *maint_win;
-	struct rio_msg_regs __iomem *msg_regs;
-	struct rio_dbell_ring dbell_ring;
-	struct rio_msg_tx_ring msg_tx_ring;
-	struct rio_msg_rx_ring msg_rx_ring;
-	struct rio_port_write_msg port_write_msg;
-	int bellirq;
-	int txirq;
-	int rxirq;
-	int pwirq;
-	struct work_struct pw_work;
-	struct kfifo pw_fifo;
-	spinlock_t pw_fifo_lock;
-};
 
 #define __fsl_read_rio_config(x, addr, err, op)		\
 	__asm__ __volatile__(				\
@@ -279,7 +72,12 @@ struct rio_priv {
 		: "=r" (err), "=r" (x)			\
 		: "b" (addr), "i" (-EFAULT), "0" (err))
 
-static void __iomem *rio_regs_win;
+void __iomem *rio_regs_win;
+void __iomem *rmu_regs_win;
+resource_size_t rio_law_start;
+
+struct fsl_rio_dbell *dbell;
+struct fsl_rio_pw *pw;
 
 #ifdef CONFIG_E500
 int fsl_rio_mcheck_exception(struct pt_regs *regs)
@@ -311,42 +109,6 @@ EXPORT_SYMBOL_GPL(fsl_rio_mcheck_exception);
 #endif
 
 /**
- * fsl_rio_doorbell_send - Send a MPC85xx doorbell message
- * @mport: RapidIO master port info
- * @index: ID of RapidIO interface
- * @destid: Destination ID of target device
- * @data: 16-bit info field of RapidIO doorbell message
- *
- * Sends a MPC85xx doorbell message. Returns %0 on success or
- * %-EINVAL on failure.
- */
-static int fsl_rio_doorbell_send(struct rio_mport *mport,
-				int index, u16 destid, u16 data)
-{
-	struct rio_priv *priv = mport->priv;
-	pr_debug("fsl_doorbell_send: index %d destid %4.4x data %4.4x\n",
-		 index, destid, data);
-	switch (mport->phy_type) {
-	case RIO_PHY_PARALLEL:
-		out_be32(&priv->dbell_atmu_regs->rowtar, destid << 22);
-		out_be16(priv->dbell_win, data);
-		break;
-	case RIO_PHY_SERIAL:
-		/* In the serial version silicons, such as MPC8548, MPC8641,
-		 * below operations is must be.
-		 */
-		out_be32(&priv->msg_regs->odmr, 0x00000000);
-		out_be32(&priv->msg_regs->odretcr, 0x00000004);
-		out_be32(&priv->msg_regs->oddpr, destid << 16);
-		out_be32(&priv->msg_regs->oddatr, data);
-		out_be32(&priv->msg_regs->odmr, 0x00000001);
-		break;
-	}
-
-	return 0;
-}
-
-/**
  * fsl_local_config_read - Generate a MPC85xx local config space read
  * @mport: RapidIO master port info
  * @index: ID of RapdiIO interface
@@ -384,8 +146,8 @@ static int fsl_local_config_write(struct rio_mport *mport,
 {
 	struct rio_priv *priv = mport->priv;
 	pr_debug
-	    ("fsl_local_config_write: index %d offset %8.8x data %8.8x\n",
-	     index, offset, data);
+		("fsl_local_config_write: index %d offset %8.8x data %8.8x\n",
+		index, offset, data);
 	out_be32(priv->regs_win + offset, data);
 
 	return 0;
@@ -413,8 +175,9 @@ fsl_rio_config_read(struct rio_mport *mport, int index, u16 destid,
 	u32 rval, err = 0;
 
 	pr_debug
-	    ("fsl_rio_config_read: index %d destid %d hopcount %d offset %8.8x len %d\n",
-	     index, destid, hopcount, offset, len);
+		("fsl_rio_config_read:"
+		" index %d destid %d hopcount %d offset %8.8x len %d\n",
+		index, destid, hopcount, offset, len);
 
 	/* 16MB maintenance window possible */
 	/* allow only aligned access to maintenance registers */
@@ -423,7 +186,7 @@ fsl_rio_config_read(struct rio_mport *mport, int index, u16 destid,
 
 	out_be32(&priv->maint_atmu_regs->rowtar,
 		 (destid << 22) | (hopcount << 12) | (offset >> 12));
-	out_be32(&priv->maint_atmu_regs->rowtear,  (destid >> 10));
+	out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10));
 
 	data = (u8 *) priv->maint_win + (offset & (RIO_MAINT_WIN_SIZE - 1));
 	switch (len) {
@@ -470,8 +233,9 @@ fsl_rio_config_write(struct rio_mport *mport, int index, u16 destid,
 	struct rio_priv *priv = mport->priv;
 	u8 *data;
 	pr_debug
-	    ("fsl_rio_config_write: index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n",
-	     index, destid, hopcount, offset, len, val);
+		("fsl_rio_config_write:"
+		" index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n",
+		index, destid, hopcount, offset, len, val);
 
 	/* 16MB maintenance windows possible */
 	/* allow only aligned access to maintenance registers */
@@ -480,7 +244,7 @@ fsl_rio_config_write(struct rio_mport *mport, int index, u16 destid,
 
 	out_be32(&priv->maint_atmu_regs->rowtar,
 		 (destid << 22) | (hopcount << 12) | (offset >> 12));
-	out_be32(&priv->maint_atmu_regs->rowtear,  (destid >> 10));
+	out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10));
 
 	data = (u8 *) priv->maint_win + (offset & (RIO_MAINT_WIN_SIZE - 1));
 	switch (len) {
@@ -500,590 +264,7 @@ fsl_rio_config_write(struct rio_mport *mport, int index, u16 destid,
 	return 0;
 }
 
-/**
- * fsl_add_outb_message - Add message to the MPC85xx outbound message queue
- * @mport: Master port with outbound message queue
- * @rdev: Target of outbound message
- * @mbox: Outbound mailbox
- * @buffer: Message to add to outbound queue
- * @len: Length of message
- *
- * Adds the @buffer message to the MPC85xx outbound message queue. Returns
- * %0 on success or %-EINVAL on failure.
- */
-static int
-fsl_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox,
-			void *buffer, size_t len)
-{
-	struct rio_priv *priv = mport->priv;
-	u32 omr;
-	struct rio_tx_desc *desc = (struct rio_tx_desc *)priv->msg_tx_ring.virt
-					+ priv->msg_tx_ring.tx_slot;
-	int ret = 0;
-
-	pr_debug("RIO: fsl_add_outb_message(): destid %4.4x mbox %d buffer " \
-		 "%8.8x len %8.8x\n", rdev->destid, mbox, (int)buffer, len);
-
-	if ((len < 8) || (len > RIO_MAX_MSG_SIZE)) {
-		ret = -EINVAL;
-		goto out;
-	}
-
-	/* Copy and clear rest of buffer */
-	memcpy(priv->msg_tx_ring.virt_buffer[priv->msg_tx_ring.tx_slot], buffer,
-			len);
-	if (len < (RIO_MAX_MSG_SIZE - 4))
-		memset(priv->msg_tx_ring.virt_buffer[priv->msg_tx_ring.tx_slot]
-				+ len, 0, RIO_MAX_MSG_SIZE - len);
-
-	switch (mport->phy_type) {
-	case RIO_PHY_PARALLEL:
-		/* Set mbox field for message */
-		desc->dport = mbox & 0x3;
-
-		/* Enable EOMI interrupt, set priority, and set destid */
-		desc->dattr = 0x28000000 | (rdev->destid << 2);
-		break;
-	case RIO_PHY_SERIAL:
-		/* Set mbox field for message, and set destid */
-		desc->dport = (rdev->destid << 16) | (mbox & 0x3);
-
-		/* Enable EOMI interrupt and priority */
-		desc->dattr = 0x28000000;
-		break;
-	}
-
-	/* Set transfer size aligned to next power of 2 (in double words) */
-	desc->dwcnt = is_power_of_2(len) ? len : 1 << get_bitmask_order(len);
-
-	/* Set snooping and source buffer address */
-	desc->saddr = 0x00000004
-		| priv->msg_tx_ring.phys_buffer[priv->msg_tx_ring.tx_slot];
-
-	/* Increment enqueue pointer */
-	omr = in_be32(&priv->msg_regs->omr);
-	out_be32(&priv->msg_regs->omr, omr | RIO_MSG_OMR_MUI);
-
-	/* Go to next descriptor */
-	if (++priv->msg_tx_ring.tx_slot == priv->msg_tx_ring.size)
-		priv->msg_tx_ring.tx_slot = 0;
-
-      out:
-	return ret;
-}
-
-/**
- * fsl_rio_tx_handler - MPC85xx outbound message interrupt handler
- * @irq: Linux interrupt number
- * @dev_instance: Pointer to interrupt-specific data
- *
- * Handles outbound message interrupts. Executes a register outbound
- * mailbox event handler and acks the interrupt occurrence.
- */
-static irqreturn_t
-fsl_rio_tx_handler(int irq, void *dev_instance)
-{
-	int osr;
-	struct rio_mport *port = (struct rio_mport *)dev_instance;
-	struct rio_priv *priv = port->priv;
-
-	osr = in_be32(&priv->msg_regs->osr);
-
-	if (osr & RIO_MSG_OSR_TE) {
-		pr_info("RIO: outbound message transmission error\n");
-		out_be32(&priv->msg_regs->osr, RIO_MSG_OSR_TE);
-		goto out;
-	}
-
-	if (osr & RIO_MSG_OSR_QOI) {
-		pr_info("RIO: outbound message queue overflow\n");
-		out_be32(&priv->msg_regs->osr, RIO_MSG_OSR_QOI);
-		goto out;
-	}
-
-	if (osr & RIO_MSG_OSR_EOMI) {
-		u32 dqp = in_be32(&priv->msg_regs->odqdpar);
-		int slot = (dqp - priv->msg_tx_ring.phys) >> 5;
-		port->outb_msg[0].mcback(port, priv->msg_tx_ring.dev_id, -1,
-				slot);
-
-		/* Ack the end-of-message interrupt */
-		out_be32(&priv->msg_regs->osr, RIO_MSG_OSR_EOMI);
-	}
-
-      out:
-	return IRQ_HANDLED;
-}
-
-/**
- * fsl_open_outb_mbox - Initialize MPC85xx outbound mailbox
- * @mport: Master port implementing the outbound message unit
- * @dev_id: Device specific pointer to pass on event
- * @mbox: Mailbox to open
- * @entries: Number of entries in the outbound mailbox ring
- *
- * Initializes buffer ring, request the outbound message interrupt,
- * and enables the outbound message unit. Returns %0 on success and
- * %-EINVAL or %-ENOMEM on failure.
- */
-static int
-fsl_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
-{
-	int i, j, rc = 0;
-	struct rio_priv *priv = mport->priv;
-
-	if ((entries < RIO_MIN_TX_RING_SIZE) ||
-	    (entries > RIO_MAX_TX_RING_SIZE) || (!is_power_of_2(entries))) {
-		rc = -EINVAL;
-		goto out;
-	}
-
-	/* Initialize shadow copy ring */
-	priv->msg_tx_ring.dev_id = dev_id;
-	priv->msg_tx_ring.size = entries;
-
-	for (i = 0; i < priv->msg_tx_ring.size; i++) {
-		priv->msg_tx_ring.virt_buffer[i] =
-			dma_alloc_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
-				&priv->msg_tx_ring.phys_buffer[i], GFP_KERNEL);
-		if (!priv->msg_tx_ring.virt_buffer[i]) {
-			rc = -ENOMEM;
-			for (j = 0; j < priv->msg_tx_ring.size; j++)
-				if (priv->msg_tx_ring.virt_buffer[j])
-					dma_free_coherent(priv->dev,
-							RIO_MSG_BUFFER_SIZE,
-							priv->msg_tx_ring.
-							virt_buffer[j],
-							priv->msg_tx_ring.
-							phys_buffer[j]);
-			goto out;
-		}
-	}
-
-	/* Initialize outbound message descriptor ring */
-	priv->msg_tx_ring.virt = dma_alloc_coherent(priv->dev,
-				priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
-				&priv->msg_tx_ring.phys, GFP_KERNEL);
-	if (!priv->msg_tx_ring.virt) {
-		rc = -ENOMEM;
-		goto out_dma;
-	}
-	memset(priv->msg_tx_ring.virt, 0,
-			priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE);
-	priv->msg_tx_ring.tx_slot = 0;
-
-	/* Point dequeue/enqueue pointers at first entry in ring */
-	out_be32(&priv->msg_regs->odqdpar, priv->msg_tx_ring.phys);
-	out_be32(&priv->msg_regs->odqepar, priv->msg_tx_ring.phys);
-
-	/* Configure for snooping */
-	out_be32(&priv->msg_regs->osar, 0x00000004);
-
-	/* Clear interrupt status */
-	out_be32(&priv->msg_regs->osr, 0x000000b3);
-
-	/* Hook up outbound message handler */
-	rc = request_irq(IRQ_RIO_TX(mport), fsl_rio_tx_handler, 0,
-			 "msg_tx", (void *)mport);
-	if (rc < 0)
-		goto out_irq;
-
-	/*
-	 * Configure outbound message unit
-	 *      Snooping
-	 *      Interrupts (all enabled, except QEIE)
-	 *      Chaining mode
-	 *      Disable
-	 */
-	out_be32(&priv->msg_regs->omr, 0x00100220);
-
-	/* Set number of entries */
-	out_be32(&priv->msg_regs->omr,
-		 in_be32(&priv->msg_regs->omr) |
-		 ((get_bitmask_order(entries) - 2) << 12));
-
-	/* Now enable the unit */
-	out_be32(&priv->msg_regs->omr, in_be32(&priv->msg_regs->omr) | 0x1);
-
-      out:
-	return rc;
-
-      out_irq:
-	dma_free_coherent(priv->dev,
-			  priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
-			  priv->msg_tx_ring.virt, priv->msg_tx_ring.phys);
-
-      out_dma:
-	for (i = 0; i < priv->msg_tx_ring.size; i++)
-		dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
-				  priv->msg_tx_ring.virt_buffer[i],
-				  priv->msg_tx_ring.phys_buffer[i]);
-
-	return rc;
-}
-
-/**
- * fsl_close_outb_mbox - Shut down MPC85xx outbound mailbox
- * @mport: Master port implementing the outbound message unit
- * @mbox: Mailbox to close
- *
- * Disables the outbound message unit, free all buffers, and
- * frees the outbound message interrupt.
- */
-static void fsl_close_outb_mbox(struct rio_mport *mport, int mbox)
-{
-	struct rio_priv *priv = mport->priv;
-	/* Disable inbound message unit */
-	out_be32(&priv->msg_regs->omr, 0);
-
-	/* Free ring */
-	dma_free_coherent(priv->dev,
-			  priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
-			  priv->msg_tx_ring.virt, priv->msg_tx_ring.phys);
-
-	/* Free interrupt */
-	free_irq(IRQ_RIO_TX(mport), (void *)mport);
-}
-
-/**
- * fsl_rio_rx_handler - MPC85xx inbound message interrupt handler
- * @irq: Linux interrupt number
- * @dev_instance: Pointer to interrupt-specific data
- *
- * Handles inbound message interrupts. Executes a registered inbound
- * mailbox event handler and acks the interrupt occurrence.
- */
-static irqreturn_t
-fsl_rio_rx_handler(int irq, void *dev_instance)
-{
-	int isr;
-	struct rio_mport *port = (struct rio_mport *)dev_instance;
-	struct rio_priv *priv = port->priv;
-
-	isr = in_be32(&priv->msg_regs->isr);
-
-	if (isr & RIO_MSG_ISR_TE) {
-		pr_info("RIO: inbound message reception error\n");
-		out_be32((void *)&priv->msg_regs->isr, RIO_MSG_ISR_TE);
-		goto out;
-	}
-
-	/* XXX Need to check/dispatch until queue empty */
-	if (isr & RIO_MSG_ISR_DIQI) {
-		/*
-		 * We implement *only* mailbox 0, but can receive messages
-		 * for any mailbox/letter to that mailbox destination. So,
-		 * make the callback with an unknown/invalid mailbox number
-		 * argument.
-		 */
-		port->inb_msg[0].mcback(port, priv->msg_rx_ring.dev_id, -1, -1);
-
-		/* Ack the queueing interrupt */
-		out_be32(&priv->msg_regs->isr, RIO_MSG_ISR_DIQI);
-	}
-
-      out:
-	return IRQ_HANDLED;
-}
-
-/**
- * fsl_open_inb_mbox - Initialize MPC85xx inbound mailbox
- * @mport: Master port implementing the inbound message unit
- * @dev_id: Device specific pointer to pass on event
- * @mbox: Mailbox to open
- * @entries: Number of entries in the inbound mailbox ring
- *
- * Initializes buffer ring, request the inbound message interrupt,
- * and enables the inbound message unit. Returns %0 on success
- * and %-EINVAL or %-ENOMEM on failure.
- */
-static int
-fsl_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
-{
-	int i, rc = 0;
-	struct rio_priv *priv = mport->priv;
-
-	if ((entries < RIO_MIN_RX_RING_SIZE) ||
-	    (entries > RIO_MAX_RX_RING_SIZE) || (!is_power_of_2(entries))) {
-		rc = -EINVAL;
-		goto out;
-	}
-
-	/* Initialize client buffer ring */
-	priv->msg_rx_ring.dev_id = dev_id;
-	priv->msg_rx_ring.size = entries;
-	priv->msg_rx_ring.rx_slot = 0;
-	for (i = 0; i < priv->msg_rx_ring.size; i++)
-		priv->msg_rx_ring.virt_buffer[i] = NULL;
-
-	/* Initialize inbound message ring */
-	priv->msg_rx_ring.virt = dma_alloc_coherent(priv->dev,
-				priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
-				&priv->msg_rx_ring.phys, GFP_KERNEL);
-	if (!priv->msg_rx_ring.virt) {
-		rc = -ENOMEM;
-		goto out;
-	}
-
-	/* Point dequeue/enqueue pointers at first entry in ring */
-	out_be32(&priv->msg_regs->ifqdpar, (u32) priv->msg_rx_ring.phys);
-	out_be32(&priv->msg_regs->ifqepar, (u32) priv->msg_rx_ring.phys);
-
-	/* Clear interrupt status */
-	out_be32(&priv->msg_regs->isr, 0x00000091);
-
-	/* Hook up inbound message handler */
-	rc = request_irq(IRQ_RIO_RX(mport), fsl_rio_rx_handler, 0,
-			 "msg_rx", (void *)mport);
-	if (rc < 0) {
-		dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
-				  priv->msg_tx_ring.virt_buffer[i],
-				  priv->msg_tx_ring.phys_buffer[i]);
-		goto out;
-	}
-
-	/*
-	 * Configure inbound message unit:
-	 *      Snooping
-	 *      4KB max message size
-	 *      Unmask all interrupt sources
-	 *      Disable
-	 */
-	out_be32(&priv->msg_regs->imr, 0x001b0060);
-
-	/* Set number of queue entries */
-	setbits32(&priv->msg_regs->imr, (get_bitmask_order(entries) - 2) << 12);
-
-	/* Now enable the unit */
-	setbits32(&priv->msg_regs->imr, 0x1);
-
-      out:
-	return rc;
-}
-
-/**
- * fsl_close_inb_mbox - Shut down MPC85xx inbound mailbox
- * @mport: Master port implementing the inbound message unit
- * @mbox: Mailbox to close
- *
- * Disables the inbound message unit, free all buffers, and
- * frees the inbound message interrupt.
- */
-static void fsl_close_inb_mbox(struct rio_mport *mport, int mbox)
-{
-	struct rio_priv *priv = mport->priv;
-	/* Disable inbound message unit */
-	out_be32(&priv->msg_regs->imr, 0);
-
-	/* Free ring */
-	dma_free_coherent(priv->dev, priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
-			  priv->msg_rx_ring.virt, priv->msg_rx_ring.phys);
-
-	/* Free interrupt */
-	free_irq(IRQ_RIO_RX(mport), (void *)mport);
-}
-
-/**
- * fsl_add_inb_buffer - Add buffer to the MPC85xx inbound message queue
- * @mport: Master port implementing the inbound message unit
- * @mbox: Inbound mailbox number
- * @buf: Buffer to add to inbound queue
- *
- * Adds the @buf buffer to the MPC85xx inbound message queue. Returns
- * %0 on success or %-EINVAL on failure.
- */
-static int fsl_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf)
-{
-	int rc = 0;
-	struct rio_priv *priv = mport->priv;
-
-	pr_debug("RIO: fsl_add_inb_buffer(), msg_rx_ring.rx_slot %d\n",
-		 priv->msg_rx_ring.rx_slot);
-
-	if (priv->msg_rx_ring.virt_buffer[priv->msg_rx_ring.rx_slot]) {
-		printk(KERN_ERR
-		       "RIO: error adding inbound buffer %d, buffer exists\n",
-		       priv->msg_rx_ring.rx_slot);
-		rc = -EINVAL;
-		goto out;
-	}
-
-	priv->msg_rx_ring.virt_buffer[priv->msg_rx_ring.rx_slot] = buf;
-	if (++priv->msg_rx_ring.rx_slot == priv->msg_rx_ring.size)
-		priv->msg_rx_ring.rx_slot = 0;
-
-      out:
-	return rc;
-}
-
-/**
- * fsl_get_inb_message - Fetch inbound message from the MPC85xx message unit
- * @mport: Master port implementing the inbound message unit
- * @mbox: Inbound mailbox number
- *
- * Gets the next available inbound message from the inbound message queue.
- * A pointer to the message is returned on success or NULL on failure.
- */
-static void *fsl_get_inb_message(struct rio_mport *mport, int mbox)
-{
-	struct rio_priv *priv = mport->priv;
-	u32 phys_buf, virt_buf;
-	void *buf = NULL;
-	int buf_idx;
-
-	phys_buf = in_be32(&priv->msg_regs->ifqdpar);
-
-	/* If no more messages, then bail out */
-	if (phys_buf == in_be32(&priv->msg_regs->ifqepar))
-		goto out2;
-
-	virt_buf = (u32) priv->msg_rx_ring.virt + (phys_buf
-						- priv->msg_rx_ring.phys);
-	buf_idx = (phys_buf - priv->msg_rx_ring.phys) / RIO_MAX_MSG_SIZE;
-	buf = priv->msg_rx_ring.virt_buffer[buf_idx];
-
-	if (!buf) {
-		printk(KERN_ERR
-		       "RIO: inbound message copy failed, no buffers\n");
-		goto out1;
-	}
-
-	/* Copy max message size, caller is expected to allocate that big */
-	memcpy(buf, (void *)virt_buf, RIO_MAX_MSG_SIZE);
-
-	/* Clear the available buffer */
-	priv->msg_rx_ring.virt_buffer[buf_idx] = NULL;
-
-      out1:
-	setbits32(&priv->msg_regs->imr, RIO_MSG_IMR_MI);
-
-      out2:
-	return buf;
-}
-
-/**
- * fsl_rio_dbell_handler - MPC85xx doorbell interrupt handler
- * @irq: Linux interrupt number
- * @dev_instance: Pointer to interrupt-specific data
- *
- * Handles doorbell interrupts. Parses a list of registered
- * doorbell event handlers and executes a matching event handler.
- */
-static irqreturn_t
-fsl_rio_dbell_handler(int irq, void *dev_instance)
-{
-	int dsr;
-	struct rio_mport *port = (struct rio_mport *)dev_instance;
-	struct rio_priv *priv = port->priv;
-
-	dsr = in_be32(&priv->msg_regs->dsr);
-
-	if (dsr & DOORBELL_DSR_TE) {
-		pr_info("RIO: doorbell reception error\n");
-		out_be32(&priv->msg_regs->dsr, DOORBELL_DSR_TE);
-		goto out;
-	}
-
-	if (dsr & DOORBELL_DSR_QFI) {
-		pr_info("RIO: doorbell queue full\n");
-		out_be32(&priv->msg_regs->dsr, DOORBELL_DSR_QFI);
-	}
-
-	/* XXX Need to check/dispatch until queue empty */
-	if (dsr & DOORBELL_DSR_DIQI) {
-		u32 dmsg =
-		    (u32) priv->dbell_ring.virt +
-		    (in_be32(&priv->msg_regs->dqdpar) & 0xfff);
-		struct rio_dbell *dbell;
-		int found = 0;
-
-		pr_debug
-		    ("RIO: processing doorbell, sid %2.2x tid %2.2x info %4.4x\n",
-		     DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg));
-
-		list_for_each_entry(dbell, &port->dbells, node) {
-			if ((dbell->res->start <= DBELL_INF(dmsg)) &&
-			    (dbell->res->end >= DBELL_INF(dmsg))) {
-				found = 1;
-				break;
-			}
-		}
-		if (found) {
-			dbell->dinb(port, dbell->dev_id, DBELL_SID(dmsg), DBELL_TID(dmsg),
-				    DBELL_INF(dmsg));
-		} else {
-			pr_debug
-			    ("RIO: spurious doorbell, sid %2.2x tid %2.2x info %4.4x\n",
-			     DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg));
-		}
-		setbits32(&priv->msg_regs->dmr, DOORBELL_DMR_DI);
-		out_be32(&priv->msg_regs->dsr, DOORBELL_DSR_DIQI);
-	}
-
-      out:
-	return IRQ_HANDLED;
-}
-
-/**
- * fsl_rio_doorbell_init - MPC85xx doorbell interface init
- * @mport: Master port implementing the inbound doorbell unit
- *
- * Initializes doorbell unit hardware and inbound DMA buffer
- * ring. Called from fsl_rio_setup(). Returns %0 on success
- * or %-ENOMEM on failure.
- */
-static int fsl_rio_doorbell_init(struct rio_mport *mport)
-{
-	struct rio_priv *priv = mport->priv;
-	int rc = 0;
-
-	/* Map outbound doorbell window immediately after maintenance window */
-	priv->dbell_win = ioremap(mport->iores.start + RIO_MAINT_WIN_SIZE,
-			    RIO_DBELL_WIN_SIZE);
-	if (!priv->dbell_win) {
-		printk(KERN_ERR
-		       "RIO: unable to map outbound doorbell window\n");
-		rc = -ENOMEM;
-		goto out;
-	}
-
-	/* Initialize inbound doorbells */
-	priv->dbell_ring.virt = dma_alloc_coherent(priv->dev, 512 *
-		    DOORBELL_MESSAGE_SIZE, &priv->dbell_ring.phys, GFP_KERNEL);
-	if (!priv->dbell_ring.virt) {
-		printk(KERN_ERR "RIO: unable allocate inbound doorbell ring\n");
-		rc = -ENOMEM;
-		iounmap(priv->dbell_win);
-		goto out;
-	}
-
-	/* Point dequeue/enqueue pointers at first entry in ring */
-	out_be32(&priv->msg_regs->dqdpar, (u32) priv->dbell_ring.phys);
-	out_be32(&priv->msg_regs->dqepar, (u32) priv->dbell_ring.phys);
-
-	/* Clear interrupt status */
-	out_be32(&priv->msg_regs->dsr, 0x00000091);
-
-	/* Hook up doorbell handler */
-	rc = request_irq(IRQ_RIO_BELL(mport), fsl_rio_dbell_handler, 0,
-			 "dbell_rx", (void *)mport);
-	if (rc < 0) {
-		iounmap(priv->dbell_win);
-		dma_free_coherent(priv->dev, 512 * DOORBELL_MESSAGE_SIZE,
-				  priv->dbell_ring.virt, priv->dbell_ring.phys);
-		printk(KERN_ERR
-		       "MPC85xx RIO: unable to request inbound doorbell irq");
-		goto out;
-	}
-
-	/* Configure doorbells for snooping, 512 entries, and enable */
-	out_be32(&priv->msg_regs->dmr, 0x00108161);
-
-      out:
-	return rc;
-}
-
-static void port_error_handler(struct rio_mport *port, int offset)
+void fsl_rio_port_error_handler(int offset)
 {
 	/*XXX: Error recovery is not implemented, we just clear errors */
 	out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), 0);
@@ -1098,263 +279,6 @@ static void port_error_handler(struct rio_mport *port, int offset)
 		out_be32((u32 *)(rio_regs_win + RIO_PORT2_ESCSR), ESCSR_CLEAR);
 	}
 }
-
-static void msg_unit_error_handler(struct rio_mport *port)
-{
-	struct rio_priv *priv = port->priv;
-
-	/*XXX: Error recovery is not implemented, we just clear errors */
-	out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), 0);
-
-	out_be32((u32 *)(rio_regs_win + RIO_IM0SR), IMSR_CLEAR);
-	out_be32((u32 *)(rio_regs_win + RIO_IM1SR), IMSR_CLEAR);
-	out_be32((u32 *)(rio_regs_win + RIO_OM0SR), OMSR_CLEAR);
-	out_be32((u32 *)(rio_regs_win + RIO_OM1SR), OMSR_CLEAR);
-
-	out_be32(&priv->msg_regs->odsr, ODSR_CLEAR);
-	out_be32(&priv->msg_regs->dsr, IDSR_CLEAR);
-
-	out_be32(&priv->msg_regs->pwsr, IPWSR_CLEAR);
-}
-
-/**
- * fsl_rio_port_write_handler - MPC85xx port write interrupt handler
- * @irq: Linux interrupt number
- * @dev_instance: Pointer to interrupt-specific data
- *
- * Handles port write interrupts. Parses a list of registered
- * port write event handlers and executes a matching event handler.
- */
-static irqreturn_t
-fsl_rio_port_write_handler(int irq, void *dev_instance)
-{
-	u32 ipwmr, ipwsr;
-	struct rio_mport *port = (struct rio_mport *)dev_instance;
-	struct rio_priv *priv = port->priv;
-	u32 epwisr, tmp;
-
-	epwisr = in_be32(priv->regs_win + RIO_EPWISR);
-	if (!(epwisr & RIO_EPWISR_PW))
-		goto pw_done;
-
-	ipwmr = in_be32(&priv->msg_regs->pwmr);
-	ipwsr = in_be32(&priv->msg_regs->pwsr);
-
-#ifdef DEBUG_PW
-	pr_debug("PW Int->IPWMR: 0x%08x IPWSR: 0x%08x (", ipwmr, ipwsr);
-	if (ipwsr & RIO_IPWSR_QF)
-		pr_debug(" QF");
-	if (ipwsr & RIO_IPWSR_TE)
-		pr_debug(" TE");
-	if (ipwsr & RIO_IPWSR_QFI)
-		pr_debug(" QFI");
-	if (ipwsr & RIO_IPWSR_PWD)
-		pr_debug(" PWD");
-	if (ipwsr & RIO_IPWSR_PWB)
-		pr_debug(" PWB");
-	pr_debug(" )\n");
-#endif
-	/* Schedule deferred processing if PW was received */
-	if (ipwsr & RIO_IPWSR_QFI) {
-		/* Save PW message (if there is room in FIFO),
-		 * otherwise discard it.
-		 */
-		if (kfifo_avail(&priv->pw_fifo) >= RIO_PW_MSG_SIZE) {
-			priv->port_write_msg.msg_count++;
-			kfifo_in(&priv->pw_fifo, priv->port_write_msg.virt,
-				 RIO_PW_MSG_SIZE);
-		} else {
-			priv->port_write_msg.discard_count++;
-			pr_debug("RIO: ISR Discarded Port-Write Msg(s) (%d)\n",
-				 priv->port_write_msg.discard_count);
-		}
-		/* Clear interrupt and issue Clear Queue command. This allows
-		 * another port-write to be received.
-		 */
-		out_be32(&priv->msg_regs->pwsr,	RIO_IPWSR_QFI);
-		out_be32(&priv->msg_regs->pwmr, ipwmr | RIO_IPWMR_CQ);
-
-		schedule_work(&priv->pw_work);
-	}
-
-	if ((ipwmr & RIO_IPWMR_EIE) && (ipwsr & RIO_IPWSR_TE)) {
-		priv->port_write_msg.err_count++;
-		pr_debug("RIO: Port-Write Transaction Err (%d)\n",
-			 priv->port_write_msg.err_count);
-		/* Clear Transaction Error: port-write controller should be
-		 * disabled when clearing this error
-		 */
-		out_be32(&priv->msg_regs->pwmr, ipwmr & ~RIO_IPWMR_PWE);
-		out_be32(&priv->msg_regs->pwsr,	RIO_IPWSR_TE);
-		out_be32(&priv->msg_regs->pwmr, ipwmr);
-	}
-
-	if (ipwsr & RIO_IPWSR_PWD) {
-		priv->port_write_msg.discard_count++;
-		pr_debug("RIO: Port Discarded Port-Write Msg(s) (%d)\n",
-			 priv->port_write_msg.discard_count);
-		out_be32(&priv->msg_regs->pwsr, RIO_IPWSR_PWD);
-	}
-
-pw_done:
-	if (epwisr & RIO_EPWISR_PINT1) {
-		tmp = in_be32(priv->regs_win + RIO_LTLEDCSR);
-		pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp);
-		port_error_handler(port, 0);
-	}
-
-	if (epwisr & RIO_EPWISR_PINT2) {
-		tmp = in_be32(priv->regs_win + RIO_LTLEDCSR);
-		pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp);
-		port_error_handler(port, 1);
-	}
-
-	if (epwisr & RIO_EPWISR_MU) {
-		tmp = in_be32(priv->regs_win + RIO_LTLEDCSR);
-		pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp);
-		msg_unit_error_handler(port);
-	}
-
-	return IRQ_HANDLED;
-}
-
-static void fsl_pw_dpc(struct work_struct *work)
-{
-	struct rio_priv *priv = container_of(work, struct rio_priv, pw_work);
-	unsigned long flags;
-	u32 msg_buffer[RIO_PW_MSG_SIZE/sizeof(u32)];
-
-	/*
-	 * Process port-write messages
-	 */
-	spin_lock_irqsave(&priv->pw_fifo_lock, flags);
-	while (kfifo_out(&priv->pw_fifo, (unsigned char *)msg_buffer,
-			 RIO_PW_MSG_SIZE)) {
-		/* Process one message */
-		spin_unlock_irqrestore(&priv->pw_fifo_lock, flags);
-#ifdef DEBUG_PW
-		{
-		u32 i;
-		pr_debug("%s : Port-Write Message:", __func__);
-		for (i = 0; i < RIO_PW_MSG_SIZE/sizeof(u32); i++) {
-			if ((i%4) == 0)
-				pr_debug("\n0x%02x: 0x%08x", i*4,
-					 msg_buffer[i]);
-			else
-				pr_debug(" 0x%08x", msg_buffer[i]);
-		}
-		pr_debug("\n");
-		}
-#endif
-		/* Pass the port-write message to RIO core for processing */
-		rio_inb_pwrite_handler((union rio_pw_msg *)msg_buffer);
-		spin_lock_irqsave(&priv->pw_fifo_lock, flags);
-	}
-	spin_unlock_irqrestore(&priv->pw_fifo_lock, flags);
-}
-
-/**
- * fsl_rio_pw_enable - enable/disable port-write interface init
- * @mport: Master port implementing the port write unit
- * @enable:    1=enable; 0=disable port-write message handling
- */
-static int fsl_rio_pw_enable(struct rio_mport *mport, int enable)
-{
-	struct rio_priv *priv = mport->priv;
-	u32 rval;
-
-	rval = in_be32(&priv->msg_regs->pwmr);
-
-	if (enable)
-		rval |= RIO_IPWMR_PWE;
-	else
-		rval &= ~RIO_IPWMR_PWE;
-
-	out_be32(&priv->msg_regs->pwmr, rval);
-
-	return 0;
-}
-
-/**
- * fsl_rio_port_write_init - MPC85xx port write interface init
- * @mport: Master port implementing the port write unit
- *
- * Initializes port write unit hardware and DMA buffer
- * ring. Called from fsl_rio_setup(). Returns %0 on success
- * or %-ENOMEM on failure.
- */
-static int fsl_rio_port_write_init(struct rio_mport *mport)
-{
-	struct rio_priv *priv = mport->priv;
-	int rc = 0;
-
-	/* Following configurations require a disabled port write controller */
-	out_be32(&priv->msg_regs->pwmr,
-		 in_be32(&priv->msg_regs->pwmr) & ~RIO_IPWMR_PWE);
-
-	/* Initialize port write */
-	priv->port_write_msg.virt = dma_alloc_coherent(priv->dev,
-					RIO_PW_MSG_SIZE,
-					&priv->port_write_msg.phys, GFP_KERNEL);
-	if (!priv->port_write_msg.virt) {
-		pr_err("RIO: unable allocate port write queue\n");
-		return -ENOMEM;
-	}
-
-	priv->port_write_msg.err_count = 0;
-	priv->port_write_msg.discard_count = 0;
-
-	/* Point dequeue/enqueue pointers at first entry */
-	out_be32(&priv->msg_regs->epwqbar, 0);
-	out_be32(&priv->msg_regs->pwqbar, (u32) priv->port_write_msg.phys);
-
-	pr_debug("EIPWQBAR: 0x%08x IPWQBAR: 0x%08x\n",
-		 in_be32(&priv->msg_regs->epwqbar),
-		 in_be32(&priv->msg_regs->pwqbar));
-
-	/* Clear interrupt status IPWSR */
-	out_be32(&priv->msg_regs->pwsr,
-		 (RIO_IPWSR_TE | RIO_IPWSR_QFI | RIO_IPWSR_PWD));
-
-	/* Configure port write contoller for snooping enable all reporting,
-	   clear queue full */
-	out_be32(&priv->msg_regs->pwmr,
-		 RIO_IPWMR_SEN | RIO_IPWMR_QFIE | RIO_IPWMR_EIE | RIO_IPWMR_CQ);
-
-
-	/* Hook up port-write handler */
-	rc = request_irq(IRQ_RIO_PW(mport), fsl_rio_port_write_handler,
-			IRQF_SHARED, "port-write", (void *)mport);
-	if (rc < 0) {
-		pr_err("MPC85xx RIO: unable to request inbound doorbell irq");
-		goto err_out;
-	}
-	/* Enable Error Interrupt */
-	out_be32((u32 *)(rio_regs_win + RIO_LTLEECSR), LTLEECSR_ENABLE_ALL);
-
-	INIT_WORK(&priv->pw_work, fsl_pw_dpc);
-	spin_lock_init(&priv->pw_fifo_lock);
-	if (kfifo_alloc(&priv->pw_fifo, RIO_PW_MSG_SIZE * 32, GFP_KERNEL)) {
-		pr_err("FIFO allocation failed\n");
-		rc = -ENOMEM;
-		goto err_out_irq;
-	}
-
-	pr_debug("IPWMR: 0x%08x IPWSR: 0x%08x\n",
-		 in_be32(&priv->msg_regs->pwmr),
-		 in_be32(&priv->msg_regs->pwsr));
-
-	return rc;
-
-err_out_irq:
-	free_irq(IRQ_RIO_PW(mport), (void *)mport);
-err_out:
-	dma_free_coherent(priv->dev, RIO_PW_MSG_SIZE,
-			  priv->port_write_msg.virt,
-			  priv->port_write_msg.phys);
-	return rc;
-}
-
 static inline void fsl_rio_info(struct device *dev, u32 ccsr)
 {
 	const char *str;
@@ -1411,16 +335,21 @@ int fsl_rio_setup(struct platform_device *dev)
 	struct rio_mport *port;
 	struct rio_priv *priv;
 	int rc = 0;
-	const u32 *dt_range, *cell;
-	struct resource regs;
+	const u32 *dt_range, *cell, *port_index;
+	u32 active_ports = 0;
+	struct resource regs, rmu_regs;
+	struct device_node *np, *rmu_node;
 	int rlen;
 	u32 ccsr;
-	u64 law_start, law_size;
+	u64 range_start, range_size;
 	int paw, aw, sw;
+	u32 i;
+	static int tmp;
+	struct device_node *rmu_np[MAX_MSG_UNIT_NUM] = {NULL};
 
 	if (!dev->dev.of_node) {
 		dev_err(&dev->dev, "Device OF-Node is NULL");
-		return -EFAULT;
+		return -ENODEV;
 	}
 
 	rc = of_address_to_resource(dev->dev.of_node, 0, &regs);
@@ -1429,37 +358,17 @@ int fsl_rio_setup(struct platform_device *dev)
 				dev->dev.of_node->full_name);
 		return -EFAULT;
 	}
-	dev_info(&dev->dev, "Of-device full name %s\n", dev->dev.of_node->full_name);
+	dev_info(&dev->dev, "Of-device full name %s\n",
+			dev->dev.of_node->full_name);
 	dev_info(&dev->dev, "Regs: %pR\n", &regs);
 
-	dt_range = of_get_property(dev->dev.of_node, "ranges", &rlen);
-	if (!dt_range) {
-		dev_err(&dev->dev, "Can't get %s property 'ranges'\n",
-				dev->dev.of_node->full_name);
-		return -EFAULT;
+	rio_regs_win = ioremap(regs.start, resource_size(&regs));
+	if (!rio_regs_win) {
+		dev_err(&dev->dev, "Unable to map rio register window\n");
+		rc = -ENOMEM;
+		goto err_rio_regs;
 	}
 
-	/* Get node address wide */
-	cell = of_get_property(dev->dev.of_node, "#address-cells", NULL);
-	if (cell)
-		aw = *cell;
-	else
-		aw = of_n_addr_cells(dev->dev.of_node);
-	/* Get node size wide */
-	cell = of_get_property(dev->dev.of_node, "#size-cells", NULL);
-	if (cell)
-		sw = *cell;
-	else
-		sw = of_n_size_cells(dev->dev.of_node);
-	/* Get parent address wide wide */
-	paw = of_n_addr_cells(dev->dev.of_node);
-
-	law_start = of_read_number(dt_range + aw, paw);
-	law_size = of_read_number(dt_range + aw + paw, sw);
-
-	dev_info(&dev->dev, "LAW start 0x%016llx, size 0x%016llx.\n",
-			law_start, law_size);
-
 	ops = kzalloc(sizeof(struct rio_ops), GFP_KERNEL);
 	if (!ops) {
 		rc = -ENOMEM;
@@ -1479,143 +388,257 @@ int fsl_rio_setup(struct platform_device *dev)
 	ops->add_inb_buffer = fsl_add_inb_buffer;
 	ops->get_inb_message = fsl_get_inb_message;
 
-	port = kzalloc(sizeof(struct rio_mport), GFP_KERNEL);
-	if (!port) {
+	rmu_node = of_parse_phandle(dev->dev.of_node, "fsl,srio-rmu-handle", 0);
+	if (!rmu_node)
+		goto err_rmu;
+	rc = of_address_to_resource(rmu_node, 0, &rmu_regs);
+	if (rc) {
+		dev_err(&dev->dev, "Can't get %s property 'reg'\n",
+				rmu_node->full_name);
+		goto err_rmu;
+	}
+	rmu_regs_win = ioremap(rmu_regs.start, resource_size(&rmu_regs));
+	if (!rmu_regs_win) {
+		dev_err(&dev->dev, "Unable to map rmu register window\n");
 		rc = -ENOMEM;
-		goto err_port;
+		goto err_rmu;
+	}
+	for_each_compatible_node(np, NULL, "fsl,srio-msg-unit") {
+		rmu_np[tmp] = np;
+		tmp++;
 	}
-	port->index = 0;
 
-	priv = kzalloc(sizeof(struct rio_priv), GFP_KERNEL);
-	if (!priv) {
-		printk(KERN_ERR "Can't alloc memory for 'priv'\n");
+	/*set up doobell node*/
+	np = of_find_compatible_node(NULL, NULL, "fsl,srio-dbell-unit");
+	if (!np) {
+		rc = -ENODEV;
+		goto err_dbell;
+	}
+	dbell = kzalloc(sizeof(struct fsl_rio_dbell), GFP_KERNEL);
+	if (!(dbell)) {
+		dev_err(&dev->dev, "Can't alloc memory for 'fsl_rio_dbell'\n");
 		rc = -ENOMEM;
-		goto err_priv;
+		goto err_dbell;
 	}
+	dbell->dev = &dev->dev;
+	dbell->bellirq = irq_of_parse_and_map(np, 1);
+	dev_info(&dev->dev, "bellirq: %d\n", dbell->bellirq);
 
-	INIT_LIST_HEAD(&port->dbells);
-	port->iores.start = law_start;
-	port->iores.end = law_start + law_size - 1;
-	port->iores.flags = IORESOURCE_MEM;
-	port->iores.name = "rio_io_win";
-
-	if (request_resource(&iomem_resource, &port->iores) < 0) {
-		dev_err(&dev->dev, "RIO: Error requesting master port region"
-			" 0x%016llx-0x%016llx\n",
-			(u64)port->iores.start, (u64)port->iores.end);
-			rc = -ENOMEM;
-			goto err_res;
+	aw = of_n_addr_cells(np);
+	dt_range = of_get_property(np, "reg", &rlen);
+	if (!dt_range) {
+		pr_err("%s: unable to find 'reg' property\n",
+			np->full_name);
+		rc = -ENOMEM;
+		goto err_pw;
 	}
+	range_start = of_read_number(dt_range, aw);
+	dbell->dbell_regs = (struct rio_dbell_regs *)(rmu_regs_win +
+				(u32)range_start);
 
-	priv->pwirq   = irq_of_parse_and_map(dev->dev.of_node, 0);
-	priv->bellirq = irq_of_parse_and_map(dev->dev.of_node, 2);
-	priv->txirq = irq_of_parse_and_map(dev->dev.of_node, 3);
-	priv->rxirq = irq_of_parse_and_map(dev->dev.of_node, 4);
-	dev_info(&dev->dev, "pwirq: %d, bellirq: %d, txirq: %d, rxirq %d\n",
-		 priv->pwirq, priv->bellirq, priv->txirq, priv->rxirq);
-
-	rio_init_dbell_res(&port->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff);
-	rio_init_mbox_res(&port->riores[RIO_INB_MBOX_RESOURCE], 0, 0);
-	rio_init_mbox_res(&port->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0);
-	strcpy(port->name, "RIO0 mport");
-
-	priv->dev = &dev->dev;
-
-	port->ops = ops;
-	port->priv = priv;
-	port->phys_efptr = 0x100;
-
-	priv->regs_win = ioremap(regs.start, resource_size(&regs));
-	rio_regs_win = priv->regs_win;
-
-	/* Probe the master port phy type */
-	ccsr = in_be32(priv->regs_win + RIO_CCSR);
-	port->phy_type = (ccsr & 1) ? RIO_PHY_SERIAL : RIO_PHY_PARALLEL;
-	dev_info(&dev->dev, "RapidIO PHY type: %s\n",
-			(port->phy_type == RIO_PHY_PARALLEL) ? "parallel" :
-			((port->phy_type == RIO_PHY_SERIAL) ? "serial" :
-			 "unknown"));
-	/* Checking the port training status */
-	if (in_be32((priv->regs_win + RIO_ESCSR)) & 1) {
-		dev_err(&dev->dev, "Port is not ready. "
-				   "Try to restart connection...\n");
-		switch (port->phy_type) {
-		case RIO_PHY_SERIAL:
+	/*set up port write node*/
+	np = of_find_compatible_node(NULL, NULL, "fsl,srio-port-write-unit");
+	if (!np) {
+		rc = -ENODEV;
+		goto err_pw;
+	}
+	pw = kzalloc(sizeof(struct fsl_rio_pw), GFP_KERNEL);
+	if (!(pw)) {
+		dev_err(&dev->dev, "Can't alloc memory for 'fsl_rio_pw'\n");
+		rc = -ENOMEM;
+		goto err_pw;
+	}
+	pw->dev = &dev->dev;
+	pw->pwirq = irq_of_parse_and_map(np, 0);
+	dev_info(&dev->dev, "pwirq: %d\n", pw->pwirq);
+	aw = of_n_addr_cells(np);
+	dt_range = of_get_property(np, "reg", &rlen);
+	if (!dt_range) {
+		pr_err("%s: unable to find 'reg' property\n",
+			np->full_name);
+		rc = -ENOMEM;
+		goto err;
+	}
+	range_start = of_read_number(dt_range, aw);
+	pw->pw_regs = (struct rio_pw_regs *)(rmu_regs_win + (u32)range_start);
+
+	/*set up ports node*/
+	for_each_child_of_node(dev->dev.of_node, np) {
+		port_index = of_get_property(np, "cell-index", NULL);
+		if (!port_index) {
+			dev_err(&dev->dev, "Can't get %s property 'cell-index'\n",
+					np->full_name);
+			continue;
+		}
+
+		dt_range = of_get_property(np, "ranges", &rlen);
+		if (!dt_range) {
+			dev_err(&dev->dev, "Can't get %s property 'ranges'\n",
+					np->full_name);
+			continue;
+		}
+
+		/* Get node address wide */
+		cell = of_get_property(np, "#address-cells", NULL);
+		if (cell)
+			aw = *cell;
+		else
+			aw = of_n_addr_cells(np);
+		/* Get node size wide */
+		cell = of_get_property(np, "#size-cells", NULL);
+		if (cell)
+			sw = *cell;
+		else
+			sw = of_n_size_cells(np);
+		/* Get parent address wide wide */
+		paw = of_n_addr_cells(np);
+		range_start = of_read_number(dt_range + aw, paw);
+		range_size = of_read_number(dt_range + aw + paw, sw);
+
+		dev_info(&dev->dev, "%s: LAW start 0x%016llx, size 0x%016llx.\n",
+				np->full_name, range_start, range_size);
+
+		port = kzalloc(sizeof(struct rio_mport), GFP_KERNEL);
+		if (!port)
+			continue;
+
+		i = *port_index - 1;
+		port->index = (unsigned char)i;
+
+		priv = kzalloc(sizeof(struct rio_priv), GFP_KERNEL);
+		if (!priv) {
+			dev_err(&dev->dev, "Can't alloc memory for 'priv'\n");
+			kfree(port);
+			continue;
+		}
+
+		INIT_LIST_HEAD(&port->dbells);
+		port->iores.start = range_start;
+		port->iores.end = port->iores.start + range_size - 1;
+		port->iores.flags = IORESOURCE_MEM;
+		port->iores.name = "rio_io_win";
+
+		if (request_resource(&iomem_resource, &port->iores) < 0) {
+			dev_err(&dev->dev, "RIO: Error requesting master port region"
+				" 0x%016llx-0x%016llx\n",
+				(u64)port->iores.start, (u64)port->iores.end);
+				kfree(priv);
+				kfree(port);
+				continue;
+		}
+		sprintf(port->name, "RIO mport %d", i);
+
+		priv->dev = &dev->dev;
+		port->ops = ops;
+		port->priv = priv;
+		port->phys_efptr = 0x100;
+		priv->regs_win = rio_regs_win;
+
+		/* Probe the master port phy type */
+		ccsr = in_be32(priv->regs_win + RIO_CCSR + i*0x20);
+		port->phy_type = (ccsr & 1) ? RIO_PHY_SERIAL : RIO_PHY_PARALLEL;
+		if (port->phy_type == RIO_PHY_PARALLEL) {
+			dev_err(&dev->dev, "RIO: Parallel PHY type, unsupported port type!\n");
+			release_resource(&port->iores);
+			kfree(priv);
+			kfree(port);
+			continue;
+		}
+		dev_info(&dev->dev, "RapidIO PHY type: Serial\n");
+		/* Checking the port training status */
+		if (in_be32((priv->regs_win + RIO_ESCSR + i*0x20)) & 1) {
+			dev_err(&dev->dev, "Port %d is not ready. "
+			"Try to restart connection...\n", i);
 			/* Disable ports */
-			out_be32(priv->regs_win + RIO_CCSR, 0);
+			out_be32(priv->regs_win
+				+ RIO_CCSR + i*0x20, 0);
 			/* Set 1x lane */
-			setbits32(priv->regs_win + RIO_CCSR, 0x02000000);
+			setbits32(priv->regs_win
+				+ RIO_CCSR + i*0x20, 0x02000000);
 			/* Enable ports */
-			setbits32(priv->regs_win + RIO_CCSR, 0x00600000);
-			break;
-		case RIO_PHY_PARALLEL:
-			/* Disable ports */
-			out_be32(priv->regs_win + RIO_CCSR, 0x22000000);
-			/* Enable ports */
-			out_be32(priv->regs_win + RIO_CCSR, 0x44000000);
-			break;
-		}
-		msleep(100);
-		if (in_be32((priv->regs_win + RIO_ESCSR)) & 1) {
-			dev_err(&dev->dev, "Port restart failed.\n");
-			rc = -ENOLINK;
-			goto err;
+			setbits32(priv->regs_win
+				+ RIO_CCSR + i*0x20, 0x00600000);
+			msleep(100);
+			if (in_be32((priv->regs_win
+					+ RIO_ESCSR + i*0x20)) & 1) {
+				dev_err(&dev->dev,
+					"Port %d restart failed.\n", i);
+				release_resource(&port->iores);
+				kfree(priv);
+				kfree(port);
+				continue;
+			}
+			dev_info(&dev->dev, "Port %d restart success!\n", i);
 		}
-		dev_info(&dev->dev, "Port restart success!\n");
-	}
-	fsl_rio_info(&dev->dev, ccsr);
+		fsl_rio_info(&dev->dev, ccsr);
 
-	port->sys_size = (in_be32((priv->regs_win + RIO_PEF_CAR))
+		port->sys_size = (in_be32((priv->regs_win + RIO_PEF_CAR))
 					& RIO_PEF_CTLS) >> 4;
-	dev_info(&dev->dev, "RapidIO Common Transport System size: %d\n",
-			port->sys_size ? 65536 : 256);
+		dev_info(&dev->dev, "RapidIO Common Transport System size: %d\n",
+				port->sys_size ? 65536 : 256);
+
+		if (rio_register_mport(port)) {
+			release_resource(&port->iores);
+			kfree(priv);
+			kfree(port);
+			continue;
+		}
+		if (port->host_deviceid >= 0)
+			out_be32(priv->regs_win + RIO_GCCSR, RIO_PORT_GEN_HOST |
+				RIO_PORT_GEN_MASTER | RIO_PORT_GEN_DISCOVERED);
+		else
+			out_be32(priv->regs_win + RIO_GCCSR,
+				RIO_PORT_GEN_MASTER);
+
+		priv->atmu_regs = (struct rio_atmu_regs *)(priv->regs_win
+			+ ((i == 0) ? RIO_ATMU_REGS_PORT1_OFFSET :
+			RIO_ATMU_REGS_PORT2_OFFSET));
 
-	if (rio_register_mport(port))
+		priv->maint_atmu_regs = priv->atmu_regs + 1;
+
+		/* Set to receive any dist ID for serial RapidIO controller. */
+		if (port->phy_type == RIO_PHY_SERIAL)
+			out_be32((priv->regs_win
+				+ RIO_ISR_AACR + i*0x80), RIO_ISR_AACR_AA);
+
+		/* Configure maintenance transaction window */
+		out_be32(&priv->maint_atmu_regs->rowbar,
+			port->iores.start >> 12);
+		out_be32(&priv->maint_atmu_regs->rowar,
+			 0x80077000 | (ilog2(RIO_MAINT_WIN_SIZE) - 1));
+
+		priv->maint_win = ioremap(port->iores.start,
+				RIO_MAINT_WIN_SIZE);
+
+		rio_law_start = range_start;
+
+		fsl_rio_setup_rmu(port, rmu_np[i]);
+
+		dbell->mport[i] = port;
+
+		active_ports++;
+	}
+
+	if (!active_ports) {
+		rc = -ENOLINK;
 		goto err;
+	}
 
-	if (port->host_deviceid >= 0)
-		out_be32(priv->regs_win + RIO_GCCSR, RIO_PORT_GEN_HOST |
-			RIO_PORT_GEN_MASTER | RIO_PORT_GEN_DISCOVERED);
-	else
-		out_be32(priv->regs_win + RIO_GCCSR, 0x00000000);
-
-	priv->atmu_regs = (struct rio_atmu_regs *)(priv->regs_win
-					+ RIO_ATMU_REGS_OFFSET);
-	priv->maint_atmu_regs = priv->atmu_regs + 1;
-	priv->dbell_atmu_regs = priv->atmu_regs + 2;
-	priv->msg_regs = (struct rio_msg_regs *)(priv->regs_win +
-				((port->phy_type == RIO_PHY_SERIAL) ?
-				RIO_S_MSG_REGS_OFFSET : RIO_P_MSG_REGS_OFFSET));
-
-	/* Set to receive any dist ID for serial RapidIO controller. */
-	if (port->phy_type == RIO_PHY_SERIAL)
-		out_be32((priv->regs_win + RIO_ISR_AACR), RIO_ISR_AACR_AA);
-
-	/* Configure maintenance transaction window */
-	out_be32(&priv->maint_atmu_regs->rowbar, law_start >> 12);
-	out_be32(&priv->maint_atmu_regs->rowar,
-		 0x80077000 | (ilog2(RIO_MAINT_WIN_SIZE) - 1));
-
-	priv->maint_win = ioremap(law_start, RIO_MAINT_WIN_SIZE);
-
-	/* Configure outbound doorbell window */
-	out_be32(&priv->dbell_atmu_regs->rowbar,
-			(law_start + RIO_MAINT_WIN_SIZE) >> 12);
-	out_be32(&priv->dbell_atmu_regs->rowar, 0x8004200b);	/* 4k */
-	fsl_rio_doorbell_init(port);
-	fsl_rio_port_write_init(port);
+	fsl_rio_doorbell_init(dbell);
+	fsl_rio_port_write_init(pw);
 
 	return 0;
 err:
-	iounmap(priv->regs_win);
-	release_resource(&port->iores);
-err_res:
-	kfree(priv);
-err_priv:
-	kfree(port);
-err_port:
+	kfree(pw);
+err_pw:
+	kfree(dbell);
+err_dbell:
+	iounmap(rmu_regs_win);
+err_rmu:
 	kfree(ops);
 err_ops:
+	iounmap(rio_regs_win);
+err_rio_regs:
 	return rc;
 }
 
@@ -1631,7 +654,7 @@ static int __devinit fsl_of_rio_rpn_probe(struct platform_device *dev)
 
 static const struct of_device_id fsl_of_rio_rpn_ids[] = {
 	{
-		.compatible = "fsl,rapidio-delta",
+		.compatible = "fsl,srio",
 	},
 	{},
 };
diff --git a/arch/powerpc/sysdev/fsl_rio.h b/arch/powerpc/sysdev/fsl_rio.h
new file mode 100644
index 0000000..ae8e274
--- /dev/null
+++ b/arch/powerpc/sysdev/fsl_rio.h
@@ -0,0 +1,135 @@
+/*
+ * Freescale MPC85xx/MPC86xx RapidIO support
+ *
+ * Copyright 2009 Sysgo AG
+ * Thomas Moll <thomas.moll@sysgo.com>
+ * - fixed maintenance access routines, check for aligned access
+ *
+ * Copyright 2009 Integrated Device Technology, Inc.
+ * Alex Bounine <alexandre.bounine@idt.com>
+ * - Added Port-Write message handling
+ * - Added Machine Check exception handling
+ *
+ * Copyright (C) 2007, 2008, 2010, 2011 Freescale Semiconductor, Inc.
+ * Zhang Wei <wei.zhang@freescale.com>
+ * Lian Minghuan-B31939 <Minghuan.Lian@freescale.com>
+ * Liu Gang <Gang.Liu@freescale.com>
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __FSL_RIO_H
+#define __FSL_RIO_H
+
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/kfifo.h>
+
+#define RIO_REGS_WIN(mport)	(((struct rio_priv *)(mport->priv))->regs_win)
+
+#define RIO_MAINT_WIN_SIZE	0x400000
+#define RIO_LTLEDCSR		0x0608
+
+#define DOORBELL_ROWAR_EN	0x80000000
+#define DOORBELL_ROWAR_TFLOWLV	0x08000000 /* highest priority level */
+#define DOORBELL_ROWAR_PCI	0x02000000 /* PCI window */
+#define DOORBELL_ROWAR_NREAD	0x00040000 /* NREAD */
+#define DOORBELL_ROWAR_MAINTRD	0x00070000  /* maintenance read */
+#define DOORBELL_ROWAR_RES	0x00002000 /* wrtpy: reserverd */
+#define DOORBELL_ROWAR_MAINTWD	0x00007000
+#define DOORBELL_ROWAR_SIZE	0x0000000b /* window size is 4k */
+
+#define RIO_ATMU_REGS_PORT1_OFFSET	0x10c00
+#define RIO_ATMU_REGS_PORT2_OFFSET	0x10e00
+#define RIO_S_DBELL_REGS_OFFSET	0x13400
+#define RIO_S_PW_REGS_OFFSET	0x134e0
+#define RIO_ATMU_REGS_DBELL_OFFSET	0x10C40
+
+#define MAX_MSG_UNIT_NUM	2
+#define MAX_PORT_NUM		4
+
+struct rio_atmu_regs {
+	 u32 rowtar;
+	 u32 rowtear;
+	 u32 rowbar;
+	 u32 pad1;
+	 u32 rowar;
+	 u32 pad2[3];
+};
+
+struct rio_dbell_ring {
+	void *virt;
+	dma_addr_t phys;
+};
+
+struct rio_port_write_msg {
+	 void *virt;
+	 dma_addr_t phys;
+	 u32 msg_count;
+	 u32 err_count;
+	 u32 discard_count;
+};
+
+struct fsl_rio_dbell {
+	struct rio_mport *mport[MAX_PORT_NUM];
+	struct device *dev;
+	struct rio_dbell_regs __iomem *dbell_regs;
+	struct rio_dbell_ring dbell_ring;
+	int bellirq;
+};
+
+struct fsl_rio_pw {
+	struct device *dev;
+	struct rio_pw_regs __iomem *pw_regs;
+	struct rio_port_write_msg port_write_msg;
+	int pwirq;
+	struct work_struct pw_work;
+	struct kfifo pw_fifo;
+	spinlock_t pw_fifo_lock;
+};
+
+struct rio_priv {
+	struct device *dev;
+	void __iomem *regs_win;
+	struct rio_atmu_regs __iomem *atmu_regs;
+	struct rio_atmu_regs __iomem *maint_atmu_regs;
+	void __iomem *maint_win;
+	void *rmm_handle; /* RapidIO message manager(unit) Handle */
+};
+
+extern void __iomem *rio_regs_win;
+extern void __iomem *rmu_regs_win;
+
+extern resource_size_t rio_law_start;
+
+extern struct fsl_rio_dbell *dbell;
+extern struct fsl_rio_pw *pw;
+
+extern int fsl_rio_setup_rmu(struct rio_mport *mport,
+	struct device_node *node);
+extern int fsl_rio_port_write_init(struct fsl_rio_pw *pw);
+extern int fsl_rio_pw_enable(struct rio_mport *mport, int enable);
+extern void fsl_rio_port_error_handler(int offset);
+extern int fsl_rio_doorbell_init(struct fsl_rio_dbell *dbell);
+
+extern int fsl_rio_doorbell_send(struct rio_mport *mport,
+				int index, u16 destid, u16 data);
+extern int fsl_add_outb_message(struct rio_mport *mport,
+	struct rio_dev *rdev,
+	int mbox, void *buffer, size_t len);
+extern int fsl_open_outb_mbox(struct rio_mport *mport,
+	void *dev_id, int mbox, int entries);
+extern void fsl_close_outb_mbox(struct rio_mport *mport, int mbox);
+extern int fsl_open_inb_mbox(struct rio_mport *mport,
+	void *dev_id, int mbox, int entries);
+extern void fsl_close_inb_mbox(struct rio_mport *mport, int mbox);
+extern int fsl_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf);
+extern void *fsl_get_inb_message(struct rio_mport *mport, int mbox);
+
+#endif
diff --git a/arch/powerpc/sysdev/fsl_rmu.c b/arch/powerpc/sysdev/fsl_rmu.c
new file mode 100644
index 0000000..1548578
--- /dev/null
+++ b/arch/powerpc/sysdev/fsl_rmu.c
@@ -0,0 +1,1104 @@
+/*
+ * Freescale MPC85xx/MPC86xx RapidIO RMU support
+ *
+ * Copyright 2009 Sysgo AG
+ * Thomas Moll <thomas.moll@sysgo.com>
+ * - fixed maintenance access routines, check for aligned access
+ *
+ * Copyright 2009 Integrated Device Technology, Inc.
+ * Alex Bounine <alexandre.bounine@idt.com>
+ * - Added Port-Write message handling
+ * - Added Machine Check exception handling
+ *
+ * Copyright (C) 2007, 2008, 2010, 2011 Freescale Semiconductor, Inc.
+ * Zhang Wei <wei.zhang@freescale.com>
+ * Lian Minghuan-B31939 <Minghuan.Lian@freescale.com>
+ * Liu Gang <Gang.Liu@freescale.com>
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/types.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+
+#include "fsl_rio.h"
+
+#define GET_RMM_HANDLE(mport) \
+		(((struct rio_priv *)(mport->priv))->rmm_handle)
+
+/* RapidIO definition irq, which read from OF-tree */
+#define IRQ_RIO_PW(m)		(((struct fsl_rio_pw *)(m))->pwirq)
+#define IRQ_RIO_BELL(m) (((struct fsl_rio_dbell *)(m))->bellirq)
+#define IRQ_RIO_TX(m) (((struct fsl_rmu *)(GET_RMM_HANDLE(m)))->txirq)
+#define IRQ_RIO_RX(m) (((struct fsl_rmu *)(GET_RMM_HANDLE(m)))->rxirq)
+
+#define RIO_MIN_TX_RING_SIZE	2
+#define RIO_MAX_TX_RING_SIZE	2048
+#define RIO_MIN_RX_RING_SIZE	2
+#define RIO_MAX_RX_RING_SIZE	2048
+
+#define RIO_IPWMR_SEN		0x00100000
+#define RIO_IPWMR_QFIE		0x00000100
+#define RIO_IPWMR_EIE		0x00000020
+#define RIO_IPWMR_CQ		0x00000002
+#define RIO_IPWMR_PWE		0x00000001
+
+#define RIO_IPWSR_QF		0x00100000
+#define RIO_IPWSR_TE		0x00000080
+#define RIO_IPWSR_QFI		0x00000010
+#define RIO_IPWSR_PWD		0x00000008
+#define RIO_IPWSR_PWB		0x00000004
+
+#define RIO_EPWISR		0x10010
+/* EPWISR Error match value */
+#define RIO_EPWISR_PINT1	0x80000000
+#define RIO_EPWISR_PINT2	0x40000000
+#define RIO_EPWISR_MU		0x00000002
+#define RIO_EPWISR_PW		0x00000001
+
+#define IPWSR_CLEAR		0x98
+#define OMSR_CLEAR		0x1cb3
+#define IMSR_CLEAR		0x491
+#define IDSR_CLEAR		0x91
+#define ODSR_CLEAR		0x1c00
+#define LTLEECSR_ENABLE_ALL	0xFFC000FC
+#define RIO_LTLEECSR		0x060c
+
+#define RIO_IM0SR		0x64
+#define RIO_IM1SR		0x164
+#define RIO_OM0SR		0x4
+#define RIO_OM1SR		0x104
+
+#define RIO_DBELL_WIN_SIZE	0x1000
+
+#define RIO_MSG_OMR_MUI		0x00000002
+#define RIO_MSG_OSR_TE		0x00000080
+#define RIO_MSG_OSR_QOI		0x00000020
+#define RIO_MSG_OSR_QFI		0x00000010
+#define RIO_MSG_OSR_MUB		0x00000004
+#define RIO_MSG_OSR_EOMI	0x00000002
+#define RIO_MSG_OSR_QEI		0x00000001
+
+#define RIO_MSG_IMR_MI		0x00000002
+#define RIO_MSG_ISR_TE		0x00000080
+#define RIO_MSG_ISR_QFI		0x00000010
+#define RIO_MSG_ISR_DIQI	0x00000001
+
+#define RIO_MSG_DESC_SIZE	32
+#define RIO_MSG_BUFFER_SIZE	4096
+
+#define DOORBELL_DMR_DI		0x00000002
+#define DOORBELL_DSR_TE		0x00000080
+#define DOORBELL_DSR_QFI	0x00000010
+#define DOORBELL_DSR_DIQI	0x00000001
+#define DOORBELL_TID_OFFSET	0x02
+#define DOORBELL_SID_OFFSET	0x04
+#define DOORBELL_INFO_OFFSET	0x06
+
+#define DOORBELL_MESSAGE_SIZE	0x08
+#define DBELL_SID(x)		(*(u16 *)(x + DOORBELL_SID_OFFSET))
+#define DBELL_TID(x)		(*(u16 *)(x + DOORBELL_TID_OFFSET))
+#define DBELL_INF(x)		(*(u16 *)(x + DOORBELL_INFO_OFFSET))
+
+struct rio_msg_regs {
+	u32 omr;
+	u32 osr;
+	u32 pad1;
+	u32 odqdpar;
+	u32 pad2;
+	u32 osar;
+	u32 odpr;
+	u32 odatr;
+	u32 odcr;
+	u32 pad3;
+	u32 odqepar;
+	u32 pad4[13];
+	u32 imr;
+	u32 isr;
+	u32 pad5;
+	u32 ifqdpar;
+	u32 pad6;
+	u32 ifqepar;
+};
+
+struct rio_dbell_regs {
+	u32 odmr;
+	u32 odsr;
+	u32 pad1[4];
+	u32 oddpr;
+	u32 oddatr;
+	u32 pad2[3];
+	u32 odretcr;
+	u32 pad3[12];
+	u32 dmr;
+	u32 dsr;
+	u32 pad4;
+	u32 dqdpar;
+	u32 pad5;
+	u32 dqepar;
+};
+
+struct rio_pw_regs {
+	u32 pwmr;
+	u32 pwsr;
+	u32 epwqbar;
+	u32 pwqbar;
+};
+
+
+struct rio_tx_desc {
+	u32 pad1;
+	u32 saddr;
+	u32 dport;
+	u32 dattr;
+	u32 pad2;
+	u32 pad3;
+	u32 dwcnt;
+	u32 pad4;
+};
+
+struct rio_msg_tx_ring {
+	void *virt;
+	dma_addr_t phys;
+	void *virt_buffer[RIO_MAX_TX_RING_SIZE];
+	dma_addr_t phys_buffer[RIO_MAX_TX_RING_SIZE];
+	int tx_slot;
+	int size;
+	void *dev_id;
+};
+
+struct rio_msg_rx_ring {
+	void *virt;
+	dma_addr_t phys;
+	void *virt_buffer[RIO_MAX_RX_RING_SIZE];
+	int rx_slot;
+	int size;
+	void *dev_id;
+};
+
+struct fsl_rmu {
+	struct rio_msg_regs __iomem *msg_regs;
+	struct rio_msg_tx_ring msg_tx_ring;
+	struct rio_msg_rx_ring msg_rx_ring;
+	int txirq;
+	int rxirq;
+};
+
+/**
+ * fsl_rio_tx_handler - MPC85xx outbound message interrupt handler
+ * @irq: Linux interrupt number
+ * @dev_instance: Pointer to interrupt-specific data
+ *
+ * Handles outbound message interrupts. Executes a register outbound
+ * mailbox event handler and acks the interrupt occurrence.
+ */
+static irqreturn_t
+fsl_rio_tx_handler(int irq, void *dev_instance)
+{
+	int osr;
+	struct rio_mport *port = (struct rio_mport *)dev_instance;
+	struct fsl_rmu *rmu = GET_RMM_HANDLE(port);
+
+	osr = in_be32(&rmu->msg_regs->osr);
+
+	if (osr & RIO_MSG_OSR_TE) {
+		pr_info("RIO: outbound message transmission error\n");
+		out_be32(&rmu->msg_regs->osr, RIO_MSG_OSR_TE);
+		goto out;
+	}
+
+	if (osr & RIO_MSG_OSR_QOI) {
+		pr_info("RIO: outbound message queue overflow\n");
+		out_be32(&rmu->msg_regs->osr, RIO_MSG_OSR_QOI);
+		goto out;
+	}
+
+	if (osr & RIO_MSG_OSR_EOMI) {
+		u32 dqp = in_be32(&rmu->msg_regs->odqdpar);
+		int slot = (dqp - rmu->msg_tx_ring.phys) >> 5;
+		if (port->outb_msg[0].mcback != NULL) {
+			port->outb_msg[0].mcback(port, rmu->msg_tx_ring.dev_id,
+					-1,
+					slot);
+		}
+		/* Ack the end-of-message interrupt */
+		out_be32(&rmu->msg_regs->osr, RIO_MSG_OSR_EOMI);
+	}
+
+out:
+	return IRQ_HANDLED;
+}
+
+/**
+ * fsl_rio_rx_handler - MPC85xx inbound message interrupt handler
+ * @irq: Linux interrupt number
+ * @dev_instance: Pointer to interrupt-specific data
+ *
+ * Handles inbound message interrupts. Executes a registered inbound
+ * mailbox event handler and acks the interrupt occurrence.
+ */
+static irqreturn_t
+fsl_rio_rx_handler(int irq, void *dev_instance)
+{
+	int isr;
+	struct rio_mport *port = (struct rio_mport *)dev_instance;
+	struct fsl_rmu *rmu = GET_RMM_HANDLE(port);
+
+	isr = in_be32(&rmu->msg_regs->isr);
+
+	if (isr & RIO_MSG_ISR_TE) {
+		pr_info("RIO: inbound message reception error\n");
+		out_be32((void *)&rmu->msg_regs->isr, RIO_MSG_ISR_TE);
+		goto out;
+	}
+
+	/* XXX Need to check/dispatch until queue empty */
+	if (isr & RIO_MSG_ISR_DIQI) {
+		/*
+		* Can receive messages for any mailbox/letter to that
+		* mailbox destination. So, make the callback with an
+		* unknown/invalid mailbox number argument.
+		*/
+		if (port->inb_msg[0].mcback != NULL)
+			port->inb_msg[0].mcback(port, rmu->msg_rx_ring.dev_id,
+				-1,
+				-1);
+
+		/* Ack the queueing interrupt */
+		out_be32(&rmu->msg_regs->isr, RIO_MSG_ISR_DIQI);
+	}
+
+out:
+	return IRQ_HANDLED;
+}
+
+/**
+ * fsl_rio_dbell_handler - MPC85xx doorbell interrupt handler
+ * @irq: Linux interrupt number
+ * @dev_instance: Pointer to interrupt-specific data
+ *
+ * Handles doorbell interrupts. Parses a list of registered
+ * doorbell event handlers and executes a matching event handler.
+ */
+static irqreturn_t
+fsl_rio_dbell_handler(int irq, void *dev_instance)
+{
+	int dsr;
+	struct fsl_rio_dbell *fsl_dbell = (struct fsl_rio_dbell *)dev_instance;
+	int i;
+
+	dsr = in_be32(&fsl_dbell->dbell_regs->dsr);
+
+	if (dsr & DOORBELL_DSR_TE) {
+		pr_info("RIO: doorbell reception error\n");
+		out_be32(&fsl_dbell->dbell_regs->dsr, DOORBELL_DSR_TE);
+		goto out;
+	}
+
+	if (dsr & DOORBELL_DSR_QFI) {
+		pr_info("RIO: doorbell queue full\n");
+		out_be32(&fsl_dbell->dbell_regs->dsr, DOORBELL_DSR_QFI);
+	}
+
+	/* XXX Need to check/dispatch until queue empty */
+	if (dsr & DOORBELL_DSR_DIQI) {
+		u32 dmsg =
+			(u32) fsl_dbell->dbell_ring.virt +
+			(in_be32(&fsl_dbell->dbell_regs->dqdpar) & 0xfff);
+		struct rio_dbell *dbell;
+		int found = 0;
+
+		pr_debug
+			("RIO: processing doorbell,"
+			" sid %2.2x tid %2.2x info %4.4x\n",
+			DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg));
+
+		for (i = 0; i < MAX_PORT_NUM; i++) {
+			if (fsl_dbell->mport[i]) {
+				list_for_each_entry(dbell,
+					&fsl_dbell->mport[i]->dbells, node) {
+					if ((dbell->res->start
+						<= DBELL_INF(dmsg))
+						&& (dbell->res->end
+						>= DBELL_INF(dmsg))) {
+						found = 1;
+						break;
+					}
+				}
+				if (found && dbell->dinb) {
+					dbell->dinb(fsl_dbell->mport[i],
+						dbell->dev_id, DBELL_SID(dmsg),
+						DBELL_TID(dmsg),
+						DBELL_INF(dmsg));
+					break;
+				}
+			}
+		}
+
+		if (!found) {
+			pr_debug
+				("RIO: spurious doorbell,"
+				" sid %2.2x tid %2.2x info %4.4x\n",
+				DBELL_SID(dmsg), DBELL_TID(dmsg),
+				DBELL_INF(dmsg));
+		}
+		setbits32(&fsl_dbell->dbell_regs->dmr, DOORBELL_DMR_DI);
+		out_be32(&fsl_dbell->dbell_regs->dsr, DOORBELL_DSR_DIQI);
+	}
+
+out:
+	return IRQ_HANDLED;
+}
+
+void msg_unit_error_handler(void)
+{
+
+	/*XXX: Error recovery is not implemented, we just clear errors */
+	out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), 0);
+
+	out_be32((u32 *)(rmu_regs_win + RIO_IM0SR), IMSR_CLEAR);
+	out_be32((u32 *)(rmu_regs_win + RIO_IM1SR), IMSR_CLEAR);
+	out_be32((u32 *)(rmu_regs_win + RIO_OM0SR), OMSR_CLEAR);
+	out_be32((u32 *)(rmu_regs_win + RIO_OM1SR), OMSR_CLEAR);
+
+	out_be32(&dbell->dbell_regs->odsr, ODSR_CLEAR);
+	out_be32(&dbell->dbell_regs->dsr, IDSR_CLEAR);
+
+	out_be32(&pw->pw_regs->pwsr, IPWSR_CLEAR);
+}
+
+/**
+ * fsl_rio_port_write_handler - MPC85xx port write interrupt handler
+ * @irq: Linux interrupt number
+ * @dev_instance: Pointer to interrupt-specific data
+ *
+ * Handles port write interrupts. Parses a list of registered
+ * port write event handlers and executes a matching event handler.
+ */
+static irqreturn_t
+fsl_rio_port_write_handler(int irq, void *dev_instance)
+{
+	u32 ipwmr, ipwsr;
+	struct fsl_rio_pw *pw = (struct fsl_rio_pw *)dev_instance;
+	u32 epwisr, tmp;
+
+	epwisr = in_be32(rio_regs_win + RIO_EPWISR);
+	if (!(epwisr & RIO_EPWISR_PW))
+		goto pw_done;
+
+	ipwmr = in_be32(&pw->pw_regs->pwmr);
+	ipwsr = in_be32(&pw->pw_regs->pwsr);
+
+#ifdef DEBUG_PW
+	pr_debug("PW Int->IPWMR: 0x%08x IPWSR: 0x%08x (", ipwmr, ipwsr);
+	if (ipwsr & RIO_IPWSR_QF)
+		pr_debug(" QF");
+	if (ipwsr & RIO_IPWSR_TE)
+		pr_debug(" TE");
+	if (ipwsr & RIO_IPWSR_QFI)
+		pr_debug(" QFI");
+	if (ipwsr & RIO_IPWSR_PWD)
+		pr_debug(" PWD");
+	if (ipwsr & RIO_IPWSR_PWB)
+		pr_debug(" PWB");
+	pr_debug(" )\n");
+#endif
+	/* Schedule deferred processing if PW was received */
+	if (ipwsr & RIO_IPWSR_QFI) {
+		/* Save PW message (if there is room in FIFO),
+		 * otherwise discard it.
+		 */
+		if (kfifo_avail(&pw->pw_fifo) >= RIO_PW_MSG_SIZE) {
+			pw->port_write_msg.msg_count++;
+			kfifo_in(&pw->pw_fifo, pw->port_write_msg.virt,
+				 RIO_PW_MSG_SIZE);
+		} else {
+			pw->port_write_msg.discard_count++;
+			pr_debug("RIO: ISR Discarded Port-Write Msg(s) (%d)\n",
+				 pw->port_write_msg.discard_count);
+		}
+		/* Clear interrupt and issue Clear Queue command. This allows
+		 * another port-write to be received.
+		 */
+		out_be32(&pw->pw_regs->pwsr,	RIO_IPWSR_QFI);
+		out_be32(&pw->pw_regs->pwmr, ipwmr | RIO_IPWMR_CQ);
+
+		schedule_work(&pw->pw_work);
+	}
+
+	if ((ipwmr & RIO_IPWMR_EIE) && (ipwsr & RIO_IPWSR_TE)) {
+		pw->port_write_msg.err_count++;
+		pr_debug("RIO: Port-Write Transaction Err (%d)\n",
+			 pw->port_write_msg.err_count);
+		/* Clear Transaction Error: port-write controller should be
+		 * disabled when clearing this error
+		 */
+		out_be32(&pw->pw_regs->pwmr, ipwmr & ~RIO_IPWMR_PWE);
+		out_be32(&pw->pw_regs->pwsr,	RIO_IPWSR_TE);
+		out_be32(&pw->pw_regs->pwmr, ipwmr);
+	}
+
+	if (ipwsr & RIO_IPWSR_PWD) {
+		pw->port_write_msg.discard_count++;
+		pr_debug("RIO: Port Discarded Port-Write Msg(s) (%d)\n",
+			 pw->port_write_msg.discard_count);
+		out_be32(&pw->pw_regs->pwsr, RIO_IPWSR_PWD);
+	}
+
+pw_done:
+	if (epwisr & RIO_EPWISR_PINT1) {
+		tmp = in_be32(rio_regs_win + RIO_LTLEDCSR);
+		pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp);
+		fsl_rio_port_error_handler(0);
+	}
+
+	if (epwisr & RIO_EPWISR_PINT2) {
+		tmp = in_be32(rio_regs_win + RIO_LTLEDCSR);
+		pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp);
+		fsl_rio_port_error_handler(1);
+	}
+
+	if (epwisr & RIO_EPWISR_MU) {
+		tmp = in_be32(rio_regs_win + RIO_LTLEDCSR);
+		pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp);
+		msg_unit_error_handler();
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void fsl_pw_dpc(struct work_struct *work)
+{
+	struct fsl_rio_pw *pw = container_of(work, struct fsl_rio_pw, pw_work);
+	u32 msg_buffer[RIO_PW_MSG_SIZE/sizeof(u32)];
+
+	/*
+	 * Process port-write messages
+	 */
+	while (kfifo_out_spinlocked(&pw->pw_fifo, (unsigned char *)msg_buffer,
+			 RIO_PW_MSG_SIZE, &pw->pw_fifo_lock)) {
+		/* Process one message */
+#ifdef DEBUG_PW
+		{
+		u32 i;
+		pr_debug("%s : Port-Write Message:", __func__);
+		for (i = 0; i < RIO_PW_MSG_SIZE/sizeof(u32); i++) {
+			if ((i%4) == 0)
+				pr_debug("\n0x%02x: 0x%08x", i*4,
+					 msg_buffer[i]);
+			else
+				pr_debug(" 0x%08x", msg_buffer[i]);
+		}
+		pr_debug("\n");
+		}
+#endif
+		/* Pass the port-write message to RIO core for processing */
+		rio_inb_pwrite_handler((union rio_pw_msg *)msg_buffer);
+	}
+}
+
+/**
+ * fsl_rio_pw_enable - enable/disable port-write interface init
+ * @mport: Master port implementing the port write unit
+ * @enable:    1=enable; 0=disable port-write message handling
+ */
+int fsl_rio_pw_enable(struct rio_mport *mport, int enable)
+{
+	u32 rval;
+
+	rval = in_be32(&pw->pw_regs->pwmr);
+
+	if (enable)
+		rval |= RIO_IPWMR_PWE;
+	else
+		rval &= ~RIO_IPWMR_PWE;
+
+	out_be32(&pw->pw_regs->pwmr, rval);
+
+	return 0;
+}
+
+/**
+ * fsl_rio_port_write_init - MPC85xx port write interface init
+ * @mport: Master port implementing the port write unit
+ *
+ * Initializes port write unit hardware and DMA buffer
+ * ring. Called from fsl_rio_setup(). Returns %0 on success
+ * or %-ENOMEM on failure.
+ */
+
+int fsl_rio_port_write_init(struct fsl_rio_pw *pw)
+{
+	int rc = 0;
+
+	/* Following configurations require a disabled port write controller */
+	out_be32(&pw->pw_regs->pwmr,
+		 in_be32(&pw->pw_regs->pwmr) & ~RIO_IPWMR_PWE);
+
+	/* Initialize port write */
+	pw->port_write_msg.virt = dma_alloc_coherent(pw->dev,
+					RIO_PW_MSG_SIZE,
+					&pw->port_write_msg.phys, GFP_KERNEL);
+	if (!pw->port_write_msg.virt) {
+		pr_err("RIO: unable allocate port write queue\n");
+		return -ENOMEM;
+	}
+
+	pw->port_write_msg.err_count = 0;
+	pw->port_write_msg.discard_count = 0;
+
+	/* Point dequeue/enqueue pointers at first entry */
+	out_be32(&pw->pw_regs->epwqbar, 0);
+	out_be32(&pw->pw_regs->pwqbar, (u32) pw->port_write_msg.phys);
+
+	pr_debug("EIPWQBAR: 0x%08x IPWQBAR: 0x%08x\n",
+		 in_be32(&pw->pw_regs->epwqbar),
+		 in_be32(&pw->pw_regs->pwqbar));
+
+	/* Clear interrupt status IPWSR */
+	out_be32(&pw->pw_regs->pwsr,
+		 (RIO_IPWSR_TE | RIO_IPWSR_QFI | RIO_IPWSR_PWD));
+
+	/* Configure port write contoller for snooping enable all reporting,
+	   clear queue full */
+	out_be32(&pw->pw_regs->pwmr,
+		 RIO_IPWMR_SEN | RIO_IPWMR_QFIE | RIO_IPWMR_EIE | RIO_IPWMR_CQ);
+
+
+	/* Hook up port-write handler */
+	rc = request_irq(IRQ_RIO_PW(pw), fsl_rio_port_write_handler,
+			IRQF_SHARED, "port-write", (void *)pw);
+	if (rc < 0) {
+		pr_err("MPC85xx RIO: unable to request inbound doorbell irq");
+		goto err_out;
+	}
+	/* Enable Error Interrupt */
+	out_be32((u32 *)(rio_regs_win + RIO_LTLEECSR), LTLEECSR_ENABLE_ALL);
+
+	INIT_WORK(&pw->pw_work, fsl_pw_dpc);
+	spin_lock_init(&pw->pw_fifo_lock);
+	if (kfifo_alloc(&pw->pw_fifo, RIO_PW_MSG_SIZE * 32, GFP_KERNEL)) {
+		pr_err("FIFO allocation failed\n");
+		rc = -ENOMEM;
+		goto err_out_irq;
+	}
+
+	pr_debug("IPWMR: 0x%08x IPWSR: 0x%08x\n",
+		 in_be32(&pw->pw_regs->pwmr),
+		 in_be32(&pw->pw_regs->pwsr));
+
+	return rc;
+
+err_out_irq:
+	free_irq(IRQ_RIO_PW(pw), (void *)pw);
+err_out:
+	dma_free_coherent(pw->dev, RIO_PW_MSG_SIZE,
+		pw->port_write_msg.virt,
+		pw->port_write_msg.phys);
+	return rc;
+}
+
+/**
+ * fsl_rio_doorbell_send - Send a MPC85xx doorbell message
+ * @mport: RapidIO master port info
+ * @index: ID of RapidIO interface
+ * @destid: Destination ID of target device
+ * @data: 16-bit info field of RapidIO doorbell message
+ *
+ * Sends a MPC85xx doorbell message. Returns %0 on success or
+ * %-EINVAL on failure.
+ */
+int fsl_rio_doorbell_send(struct rio_mport *mport,
+				int index, u16 destid, u16 data)
+{
+	pr_debug("fsl_doorbell_send: index %d destid %4.4x data %4.4x\n",
+		 index, destid, data);
+
+	/* In the serial version silicons, such as MPC8548, MPC8641,
+	 * below operations is must be.
+	 */
+	out_be32(&dbell->dbell_regs->odmr, 0x00000000);
+	out_be32(&dbell->dbell_regs->odretcr, 0x00000004);
+	out_be32(&dbell->dbell_regs->oddpr, destid << 16);
+	out_be32(&dbell->dbell_regs->oddatr, (index << 20) | data);
+	out_be32(&dbell->dbell_regs->odmr, 0x00000001);
+
+	return 0;
+}
+
+/**
+ * fsl_add_outb_message - Add message to the MPC85xx outbound message queue
+ * @mport: Master port with outbound message queue
+ * @rdev: Target of outbound message
+ * @mbox: Outbound mailbox
+ * @buffer: Message to add to outbound queue
+ * @len: Length of message
+ *
+ * Adds the @buffer message to the MPC85xx outbound message queue. Returns
+ * %0 on success or %-EINVAL on failure.
+ */
+int
+fsl_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox,
+			void *buffer, size_t len)
+{
+	struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
+	u32 omr;
+	struct rio_tx_desc *desc = (struct rio_tx_desc *)rmu->msg_tx_ring.virt
+					+ rmu->msg_tx_ring.tx_slot;
+	int ret = 0;
+
+	pr_debug("RIO: fsl_add_outb_message(): destid %4.4x mbox %d buffer " \
+		 "%8.8x len %8.8x\n", rdev->destid, mbox, (int)buffer, len);
+	if ((len < 8) || (len > RIO_MAX_MSG_SIZE)) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* Copy and clear rest of buffer */
+	memcpy(rmu->msg_tx_ring.virt_buffer[rmu->msg_tx_ring.tx_slot], buffer,
+			len);
+	if (len < (RIO_MAX_MSG_SIZE - 4))
+		memset(rmu->msg_tx_ring.virt_buffer[rmu->msg_tx_ring.tx_slot]
+				+ len, 0, RIO_MAX_MSG_SIZE - len);
+
+	/* Set mbox field for message, and set destid */
+	desc->dport = (rdev->destid << 16) | (mbox & 0x3);
+
+	/* Enable EOMI interrupt and priority */
+	desc->dattr = 0x28000000 | ((mport->index) << 20);
+
+	/* Set transfer size aligned to next power of 2 (in double words) */
+	desc->dwcnt = is_power_of_2(len) ? len : 1 << get_bitmask_order(len);
+
+	/* Set snooping and source buffer address */
+	desc->saddr = 0x00000004
+		| rmu->msg_tx_ring.phys_buffer[rmu->msg_tx_ring.tx_slot];
+
+	/* Increment enqueue pointer */
+	omr = in_be32(&rmu->msg_regs->omr);
+	out_be32(&rmu->msg_regs->omr, omr | RIO_MSG_OMR_MUI);
+
+	/* Go to next descriptor */
+	if (++rmu->msg_tx_ring.tx_slot == rmu->msg_tx_ring.size)
+		rmu->msg_tx_ring.tx_slot = 0;
+
+out:
+	return ret;
+}
+
+/**
+ * fsl_open_outb_mbox - Initialize MPC85xx outbound mailbox
+ * @mport: Master port implementing the outbound message unit
+ * @dev_id: Device specific pointer to pass on event
+ * @mbox: Mailbox to open
+ * @entries: Number of entries in the outbound mailbox ring
+ *
+ * Initializes buffer ring, request the outbound message interrupt,
+ * and enables the outbound message unit. Returns %0 on success and
+ * %-EINVAL or %-ENOMEM on failure.
+ */
+int
+fsl_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
+{
+	int i, j, rc = 0;
+	struct rio_priv *priv = mport->priv;
+	struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
+
+	if ((entries < RIO_MIN_TX_RING_SIZE) ||
+		(entries > RIO_MAX_TX_RING_SIZE) || (!is_power_of_2(entries))) {
+		rc = -EINVAL;
+		goto out;
+	}
+
+	/* Initialize shadow copy ring */
+	rmu->msg_tx_ring.dev_id = dev_id;
+	rmu->msg_tx_ring.size = entries;
+
+	for (i = 0; i < rmu->msg_tx_ring.size; i++) {
+		rmu->msg_tx_ring.virt_buffer[i] =
+			dma_alloc_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
+				&rmu->msg_tx_ring.phys_buffer[i], GFP_KERNEL);
+		if (!rmu->msg_tx_ring.virt_buffer[i]) {
+			rc = -ENOMEM;
+			for (j = 0; j < rmu->msg_tx_ring.size; j++)
+				if (rmu->msg_tx_ring.virt_buffer[j])
+					dma_free_coherent(priv->dev,
+							RIO_MSG_BUFFER_SIZE,
+							rmu->msg_tx_ring.
+							virt_buffer[j],
+							rmu->msg_tx_ring.
+							phys_buffer[j]);
+			goto out;
+		}
+	}
+
+	/* Initialize outbound message descriptor ring */
+	rmu->msg_tx_ring.virt = dma_alloc_coherent(priv->dev,
+				rmu->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+				&rmu->msg_tx_ring.phys, GFP_KERNEL);
+	if (!rmu->msg_tx_ring.virt) {
+		rc = -ENOMEM;
+		goto out_dma;
+	}
+	memset(rmu->msg_tx_ring.virt, 0,
+			rmu->msg_tx_ring.size * RIO_MSG_DESC_SIZE);
+	rmu->msg_tx_ring.tx_slot = 0;
+
+	/* Point dequeue/enqueue pointers at first entry in ring */
+	out_be32(&rmu->msg_regs->odqdpar, rmu->msg_tx_ring.phys);
+	out_be32(&rmu->msg_regs->odqepar, rmu->msg_tx_ring.phys);
+
+	/* Configure for snooping */
+	out_be32(&rmu->msg_regs->osar, 0x00000004);
+
+	/* Clear interrupt status */
+	out_be32(&rmu->msg_regs->osr, 0x000000b3);
+
+	/* Hook up outbound message handler */
+	rc = request_irq(IRQ_RIO_TX(mport), fsl_rio_tx_handler, 0,
+			 "msg_tx", (void *)mport);
+	if (rc < 0)
+		goto out_irq;
+
+	/*
+	 * Configure outbound message unit
+	 *      Snooping
+	 *      Interrupts (all enabled, except QEIE)
+	 *      Chaining mode
+	 *      Disable
+	 */
+	out_be32(&rmu->msg_regs->omr, 0x00100220);
+
+	/* Set number of entries */
+	out_be32(&rmu->msg_regs->omr,
+		 in_be32(&rmu->msg_regs->omr) |
+		 ((get_bitmask_order(entries) - 2) << 12));
+
+	/* Now enable the unit */
+	out_be32(&rmu->msg_regs->omr, in_be32(&rmu->msg_regs->omr) | 0x1);
+
+out:
+	return rc;
+
+out_irq:
+	dma_free_coherent(priv->dev,
+		rmu->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+		rmu->msg_tx_ring.virt, rmu->msg_tx_ring.phys);
+
+out_dma:
+	for (i = 0; i < rmu->msg_tx_ring.size; i++)
+		dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
+		rmu->msg_tx_ring.virt_buffer[i],
+		rmu->msg_tx_ring.phys_buffer[i]);
+
+	return rc;
+}
+
+/**
+ * fsl_close_outb_mbox - Shut down MPC85xx outbound mailbox
+ * @mport: Master port implementing the outbound message unit
+ * @mbox: Mailbox to close
+ *
+ * Disables the outbound message unit, free all buffers, and
+ * frees the outbound message interrupt.
+ */
+void fsl_close_outb_mbox(struct rio_mport *mport, int mbox)
+{
+	struct rio_priv *priv = mport->priv;
+	struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
+
+	/* Disable inbound message unit */
+	out_be32(&rmu->msg_regs->omr, 0);
+
+	/* Free ring */
+	dma_free_coherent(priv->dev,
+	rmu->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+	rmu->msg_tx_ring.virt, rmu->msg_tx_ring.phys);
+
+	/* Free interrupt */
+	free_irq(IRQ_RIO_TX(mport), (void *)mport);
+}
+
+/**
+ * fsl_open_inb_mbox - Initialize MPC85xx inbound mailbox
+ * @mport: Master port implementing the inbound message unit
+ * @dev_id: Device specific pointer to pass on event
+ * @mbox: Mailbox to open
+ * @entries: Number of entries in the inbound mailbox ring
+ *
+ * Initializes buffer ring, request the inbound message interrupt,
+ * and enables the inbound message unit. Returns %0 on success
+ * and %-EINVAL or %-ENOMEM on failure.
+ */
+int
+fsl_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
+{
+	int i, rc = 0;
+	struct rio_priv *priv = mport->priv;
+	struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
+
+	if ((entries < RIO_MIN_RX_RING_SIZE) ||
+		(entries > RIO_MAX_RX_RING_SIZE) || (!is_power_of_2(entries))) {
+		rc = -EINVAL;
+		goto out;
+	}
+
+	/* Initialize client buffer ring */
+	rmu->msg_rx_ring.dev_id = dev_id;
+	rmu->msg_rx_ring.size = entries;
+	rmu->msg_rx_ring.rx_slot = 0;
+	for (i = 0; i < rmu->msg_rx_ring.size; i++)
+		rmu->msg_rx_ring.virt_buffer[i] = NULL;
+
+	/* Initialize inbound message ring */
+	rmu->msg_rx_ring.virt = dma_alloc_coherent(priv->dev,
+				rmu->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
+				&rmu->msg_rx_ring.phys, GFP_KERNEL);
+	if (!rmu->msg_rx_ring.virt) {
+		rc = -ENOMEM;
+		goto out;
+	}
+
+	/* Point dequeue/enqueue pointers at first entry in ring */
+	out_be32(&rmu->msg_regs->ifqdpar, (u32) rmu->msg_rx_ring.phys);
+	out_be32(&rmu->msg_regs->ifqepar, (u32) rmu->msg_rx_ring.phys);
+
+	/* Clear interrupt status */
+	out_be32(&rmu->msg_regs->isr, 0x00000091);
+
+	/* Hook up inbound message handler */
+	rc = request_irq(IRQ_RIO_RX(mport), fsl_rio_rx_handler, 0,
+			 "msg_rx", (void *)mport);
+	if (rc < 0) {
+		dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
+			rmu->msg_tx_ring.virt_buffer[i],
+			rmu->msg_tx_ring.phys_buffer[i]);
+		goto out;
+	}
+
+	/*
+	 * Configure inbound message unit:
+	 *      Snooping
+	 *      4KB max message size
+	 *      Unmask all interrupt sources
+	 *      Disable
+	 */
+	out_be32(&rmu->msg_regs->imr, 0x001b0060);
+
+	/* Set number of queue entries */
+	setbits32(&rmu->msg_regs->imr, (get_bitmask_order(entries) - 2) << 12);
+
+	/* Now enable the unit */
+	setbits32(&rmu->msg_regs->imr, 0x1);
+
+out:
+	return rc;
+}
+
+/**
+ * fsl_close_inb_mbox - Shut down MPC85xx inbound mailbox
+ * @mport: Master port implementing the inbound message unit
+ * @mbox: Mailbox to close
+ *
+ * Disables the inbound message unit, free all buffers, and
+ * frees the inbound message interrupt.
+ */
+void fsl_close_inb_mbox(struct rio_mport *mport, int mbox)
+{
+	struct rio_priv *priv = mport->priv;
+	struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
+
+	/* Disable inbound message unit */
+	out_be32(&rmu->msg_regs->imr, 0);
+
+	/* Free ring */
+	dma_free_coherent(priv->dev, rmu->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
+	rmu->msg_rx_ring.virt, rmu->msg_rx_ring.phys);
+
+	/* Free interrupt */
+	free_irq(IRQ_RIO_RX(mport), (void *)mport);
+}
+
+/**
+ * fsl_add_inb_buffer - Add buffer to the MPC85xx inbound message queue
+ * @mport: Master port implementing the inbound message unit
+ * @mbox: Inbound mailbox number
+ * @buf: Buffer to add to inbound queue
+ *
+ * Adds the @buf buffer to the MPC85xx inbound message queue. Returns
+ * %0 on success or %-EINVAL on failure.
+ */
+int fsl_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf)
+{
+	int rc = 0;
+	struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
+
+	pr_debug("RIO: fsl_add_inb_buffer(), msg_rx_ring.rx_slot %d\n",
+		 rmu->msg_rx_ring.rx_slot);
+
+	if (rmu->msg_rx_ring.virt_buffer[rmu->msg_rx_ring.rx_slot]) {
+		printk(KERN_ERR
+			"RIO: error adding inbound buffer %d, buffer exists\n",
+			rmu->msg_rx_ring.rx_slot);
+		rc = -EINVAL;
+		goto out;
+	}
+
+	rmu->msg_rx_ring.virt_buffer[rmu->msg_rx_ring.rx_slot] = buf;
+	if (++rmu->msg_rx_ring.rx_slot == rmu->msg_rx_ring.size)
+		rmu->msg_rx_ring.rx_slot = 0;
+
+out:
+	return rc;
+}
+
+/**
+ * fsl_get_inb_message - Fetch inbound message from the MPC85xx message unit
+ * @mport: Master port implementing the inbound message unit
+ * @mbox: Inbound mailbox number
+ *
+ * Gets the next available inbound message from the inbound message queue.
+ * A pointer to the message is returned on success or NULL on failure.
+ */
+void *fsl_get_inb_message(struct rio_mport *mport, int mbox)
+{
+	struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
+	u32 phys_buf, virt_buf;
+	void *buf = NULL;
+	int buf_idx;
+
+	phys_buf = in_be32(&rmu->msg_regs->ifqdpar);
+
+	/* If no more messages, then bail out */
+	if (phys_buf == in_be32(&rmu->msg_regs->ifqepar))
+		goto out2;
+
+	virt_buf = (u32) rmu->msg_rx_ring.virt + (phys_buf
+						- rmu->msg_rx_ring.phys);
+	buf_idx = (phys_buf - rmu->msg_rx_ring.phys) / RIO_MAX_MSG_SIZE;
+	buf = rmu->msg_rx_ring.virt_buffer[buf_idx];
+
+	if (!buf) {
+		printk(KERN_ERR
+			"RIO: inbound message copy failed, no buffers\n");
+		goto out1;
+	}
+
+	/* Copy max message size, caller is expected to allocate that big */
+	memcpy(buf, (void *)virt_buf, RIO_MAX_MSG_SIZE);
+
+	/* Clear the available buffer */
+	rmu->msg_rx_ring.virt_buffer[buf_idx] = NULL;
+
+out1:
+	setbits32(&rmu->msg_regs->imr, RIO_MSG_IMR_MI);
+
+out2:
+	return buf;
+}
+
+/**
+ * fsl_rio_doorbell_init - MPC85xx doorbell interface init
+ * @mport: Master port implementing the inbound doorbell unit
+ *
+ * Initializes doorbell unit hardware and inbound DMA buffer
+ * ring. Called from fsl_rio_setup(). Returns %0 on success
+ * or %-ENOMEM on failure.
+ */
+int fsl_rio_doorbell_init(struct fsl_rio_dbell *dbell)
+{
+	int rc = 0;
+
+	/* Initialize inbound doorbells */
+	dbell->dbell_ring.virt = dma_alloc_coherent(dbell->dev, 512 *
+		DOORBELL_MESSAGE_SIZE, &dbell->dbell_ring.phys, GFP_KERNEL);
+	if (!dbell->dbell_ring.virt) {
+		printk(KERN_ERR "RIO: unable allocate inbound doorbell ring\n");
+		rc = -ENOMEM;
+		goto out;
+	}
+
+	/* Point dequeue/enqueue pointers at first entry in ring */
+	out_be32(&dbell->dbell_regs->dqdpar, (u32) dbell->dbell_ring.phys);
+	out_be32(&dbell->dbell_regs->dqepar, (u32) dbell->dbell_ring.phys);
+
+	/* Clear interrupt status */
+	out_be32(&dbell->dbell_regs->dsr, 0x00000091);
+
+	/* Hook up doorbell handler */
+	rc = request_irq(IRQ_RIO_BELL(dbell), fsl_rio_dbell_handler, 0,
+			 "dbell_rx", (void *)dbell);
+	if (rc < 0) {
+		dma_free_coherent(dbell->dev, 512 * DOORBELL_MESSAGE_SIZE,
+			 dbell->dbell_ring.virt, dbell->dbell_ring.phys);
+		printk(KERN_ERR
+			"MPC85xx RIO: unable to request inbound doorbell irq");
+		goto out;
+	}
+
+	/* Configure doorbells for snooping, 512 entries, and enable */
+	out_be32(&dbell->dbell_regs->dmr, 0x00108161);
+
+out:
+	return rc;
+}
+
+int fsl_rio_setup_rmu(struct rio_mport *mport, struct device_node *node)
+{
+	struct rio_priv *priv;
+	struct fsl_rmu *rmu;
+	u64 msg_start;
+	const u32 *msg_addr;
+	int mlen;
+	int aw;
+
+	if (!mport || !mport->priv)
+		return -EINVAL;
+
+	priv = mport->priv;
+
+	if (!node) {
+		dev_warn(priv->dev, "Can't get %s property 'fsl,rmu'\n",
+			priv->dev->of_node->full_name);
+		return -EINVAL;
+	}
+
+	rmu = kzalloc(sizeof(struct fsl_rmu), GFP_KERNEL);
+	if (!rmu)
+		return -ENOMEM;
+
+	aw = of_n_addr_cells(node);
+	msg_addr = of_get_property(node, "reg", &mlen);
+	if (!msg_addr) {
+		pr_err("%s: unable to find 'reg' property of message-unit\n",
+			node->full_name);
+		kfree(rmu);
+		return -ENOMEM;
+	}
+	msg_start = of_read_number(msg_addr, aw);
+
+	rmu->msg_regs = (struct rio_msg_regs *)
+			(rmu_regs_win + (u32)msg_start);
+
+	rmu->txirq = irq_of_parse_and_map(node, 0);
+	rmu->rxirq = irq_of_parse_and_map(node, 1);
+	printk(KERN_INFO "%s: txirq: %d, rxirq %d\n",
+		node->full_name, rmu->txirq, rmu->rxirq);
+
+	priv->rmm_handle = rmu;
+
+	rio_init_dbell_res(&mport->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff);
+	rio_init_mbox_res(&mport->riores[RIO_INB_MBOX_RESOURCE], 0, 0);
+	rio_init_mbox_res(&mport->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0);
+
+	return 0;
+}
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 8c7e852..4e9ccb1 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -154,7 +154,7 @@ static inline unsigned int mpic_processor_id(struct mpic *mpic)
 {
 	unsigned int cpu = 0;
 
-	if (mpic->flags & MPIC_PRIMARY)
+	if (!(mpic->flags & MPIC_SECONDARY))
 		cpu = hard_smp_processor_id();
 
 	return cpu;
@@ -315,29 +315,25 @@ static void _mpic_map_mmio(struct mpic *mpic, phys_addr_t phys_addr,
 }
 
 #ifdef CONFIG_PPC_DCR
-static void _mpic_map_dcr(struct mpic *mpic, struct device_node *node,
-			  struct mpic_reg_bank *rb,
+static void _mpic_map_dcr(struct mpic *mpic, struct mpic_reg_bank *rb,
 			  unsigned int offset, unsigned int size)
 {
-	const u32 *dbasep;
-
-	dbasep = of_get_property(node, "dcr-reg", NULL);
-
-	rb->dhost = dcr_map(node, *dbasep + offset, size);
+	phys_addr_t phys_addr = dcr_resource_start(mpic->node, 0);
+	rb->dhost = dcr_map(mpic->node, phys_addr + offset, size);
 	BUG_ON(!DCR_MAP_OK(rb->dhost));
 }
 
-static inline void mpic_map(struct mpic *mpic, struct device_node *node,
+static inline void mpic_map(struct mpic *mpic,
 			    phys_addr_t phys_addr, struct mpic_reg_bank *rb,
 			    unsigned int offset, unsigned int size)
 {
 	if (mpic->flags & MPIC_USES_DCR)
-		_mpic_map_dcr(mpic, node, rb, offset, size);
+		_mpic_map_dcr(mpic, rb, offset, size);
 	else
 		_mpic_map_mmio(mpic, phys_addr, rb, offset, size);
 }
 #else /* CONFIG_PPC_DCR */
-#define mpic_map(m,n,p,b,o,s)	_mpic_map_mmio(m,p,b,o,s)
+#define mpic_map(m,p,b,o,s)	_mpic_map_mmio(m,p,b,o,s)
 #endif /* !CONFIG_PPC_DCR */
 
 
@@ -901,7 +897,7 @@ int mpic_set_irq_type(struct irq_data *d, unsigned int flow_type)
 	if (vold != vnew)
 		mpic_irq_write(src, MPIC_INFO(IRQ_VECTOR_PRI), vnew);
 
-	return IRQ_SET_MASK_OK_NOCOPY;;
+	return IRQ_SET_MASK_OK_NOCOPY;
 }
 
 void mpic_set_vector(unsigned int virq, unsigned int vector)
@@ -990,7 +986,7 @@ static int mpic_host_map(struct irq_host *h, unsigned int virq,
 
 #ifdef CONFIG_SMP
 	else if (hw >= mpic->ipi_vecs[0]) {
-		WARN_ON(!(mpic->flags & MPIC_PRIMARY));
+		WARN_ON(mpic->flags & MPIC_SECONDARY);
 
 		DBG("mpic: mapping as IPI\n");
 		irq_set_chip_data(virq, mpic);
@@ -1001,7 +997,7 @@ static int mpic_host_map(struct irq_host *h, unsigned int virq,
 #endif /* CONFIG_SMP */
 
 	if (hw >= mpic->timer_vecs[0] && hw <= mpic->timer_vecs[7]) {
-		WARN_ON(!(mpic->flags & MPIC_PRIMARY));
+		WARN_ON(mpic->flags & MPIC_SECONDARY);
 
 		DBG("mpic: mapping as timer\n");
 		irq_set_chip_data(virq, mpic);
@@ -1115,17 +1111,28 @@ static int mpic_host_xlate(struct irq_host *h, struct device_node *ct,
 	return 0;
 }
 
+/* IRQ handler for a secondary MPIC cascaded from another IRQ controller */
+static void mpic_cascade(unsigned int irq, struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	struct mpic *mpic = irq_desc_get_handler_data(desc);
+	unsigned int virq;
+
+	BUG_ON(!(mpic->flags & MPIC_SECONDARY));
+
+	virq = mpic_get_one_irq(mpic);
+	if (virq != NO_IRQ)
+		generic_handle_irq(virq);
+
+	chip->irq_eoi(&desc->irq_data);
+}
+
 static struct irq_host_ops mpic_host_ops = {
 	.match = mpic_host_match,
 	.map = mpic_host_map,
 	.xlate = mpic_host_xlate,
 };
 
-static int mpic_reset_prohibited(struct device_node *node)
-{
-	return node && of_get_property(node, "pic-no-reset", NULL);
-}
-
 /*
  * Exported functions
  */
@@ -1137,27 +1144,60 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 				unsigned int irq_count,
 				const char *name)
 {
-	struct mpic	*mpic;
-	u32		greg_feature;
-	const char	*vers;
-	int		i;
-	int		intvec_top;
-	u64		paddr = phys_addr;
+	int i, psize, intvec_top;
+	struct mpic *mpic;
+	u32 greg_feature;
+	const char *vers;
+	const u32 *psrc;
+
+	/* Default MPIC search parameters */
+	static const struct of_device_id __initconst mpic_device_id[] = {
+		{ .type	      = "open-pic", },
+		{ .compatible = "open-pic", },
+		{},
+	};
+
+	/*
+	 * If we were not passed a device-tree node, then perform the default
+	 * search for standardized a standardized OpenPIC.
+	 */
+	if (node) {
+		node = of_node_get(node);
+	} else {
+		node = of_find_matching_node(NULL, mpic_device_id);
+		if (!node)
+			return NULL;
+	}
+
+	/* Pick the physical address from the device tree if unspecified */
+	if (!phys_addr) {
+		/* Check if it is DCR-based */
+		if (of_get_property(node, "dcr-reg", NULL)) {
+			flags |= MPIC_USES_DCR;
+		} else {
+			struct resource r;
+			if (of_address_to_resource(node, 0, &r))
+				goto err_of_node_put;
+			phys_addr = r.start;
+		}
+	}
 
 	mpic = kzalloc(sizeof(struct mpic), GFP_KERNEL);
 	if (mpic == NULL)
-		return NULL;
+		goto err_of_node_put;
 
 	mpic->name = name;
+	mpic->node = node;
+	mpic->paddr = phys_addr;
 
 	mpic->hc_irq = mpic_irq_chip;
 	mpic->hc_irq.name = name;
-	if (flags & MPIC_PRIMARY)
+	if (!(flags & MPIC_SECONDARY))
 		mpic->hc_irq.irq_set_affinity = mpic_set_affinity;
 #ifdef CONFIG_MPIC_U3_HT_IRQS
 	mpic->hc_ht_irq = mpic_irq_ht_chip;
 	mpic->hc_ht_irq.name = name;
-	if (flags & MPIC_PRIMARY)
+	if (!(flags & MPIC_SECONDARY))
 		mpic->hc_ht_irq.irq_set_affinity = mpic_set_affinity;
 #endif /* CONFIG_MPIC_U3_HT_IRQS */
 
@@ -1194,28 +1234,22 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 	mpic->spurious_vec  = intvec_top;
 
 	/* Check for "big-endian" in device-tree */
-	if (node && of_get_property(node, "big-endian", NULL) != NULL)
+	if (of_get_property(mpic->node, "big-endian", NULL) != NULL)
 		mpic->flags |= MPIC_BIG_ENDIAN;
-	if (node && of_device_is_compatible(node, "fsl,mpic"))
+	if (of_device_is_compatible(mpic->node, "fsl,mpic"))
 		mpic->flags |= MPIC_FSL;
 
 	/* Look for protected sources */
-	if (node) {
-		int psize;
-		unsigned int bits, mapsize;
-		const u32 *psrc =
-			of_get_property(node, "protected-sources", &psize);
-		if (psrc) {
-			psize /= 4;
-			bits = intvec_top + 1;
-			mapsize = BITS_TO_LONGS(bits) * sizeof(unsigned long);
-			mpic->protected = kzalloc(mapsize, GFP_KERNEL);
-			BUG_ON(mpic->protected == NULL);
-			for (i = 0; i < psize; i++) {
-				if (psrc[i] > intvec_top)
-					continue;
-				__set_bit(psrc[i], mpic->protected);
-			}
+	psrc = of_get_property(mpic->node, "protected-sources", &psize);
+	if (psrc) {
+		/* Allocate a bitmap with one bit per interrupt */
+		unsigned int mapsize = BITS_TO_LONGS(intvec_top + 1);
+		mpic->protected = kzalloc(mapsize*sizeof(long), GFP_KERNEL);
+		BUG_ON(mpic->protected == NULL);
+		for (i = 0; i < psize/sizeof(u32); i++) {
+			if (psrc[i] > intvec_top)
+				continue;
+			__set_bit(psrc[i], mpic->protected);
 		}
 	}
 
@@ -1224,42 +1258,32 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 #endif
 
 	/* default register type */
-	mpic->reg_type = (flags & MPIC_BIG_ENDIAN) ?
-		mpic_access_mmio_be : mpic_access_mmio_le;
-
-	/* If no physical address is passed in, a device-node is mandatory */
-	BUG_ON(paddr == 0 && node == NULL);
+	if (flags & MPIC_BIG_ENDIAN)
+		mpic->reg_type = mpic_access_mmio_be;
+	else
+		mpic->reg_type = mpic_access_mmio_le;
 
-	/* If no physical address passed in, check if it's dcr based */
-	if (paddr == 0 && of_get_property(node, "dcr-reg", NULL) != NULL) {
+	/*
+	 * An MPIC with a "dcr-reg" property must be accessed that way, but
+	 * only if the kernel includes DCR support.
+	 */
 #ifdef CONFIG_PPC_DCR
-		mpic->flags |= MPIC_USES_DCR;
+	if (flags & MPIC_USES_DCR)
 		mpic->reg_type = mpic_access_dcr;
 #else
-		BUG();
-#endif /* CONFIG_PPC_DCR */
-	}
-
-	/* If the MPIC is not DCR based, and no physical address was passed
-	 * in, try to obtain one
-	 */
-	if (paddr == 0 && !(mpic->flags & MPIC_USES_DCR)) {
-		const u32 *reg = of_get_property(node, "reg", NULL);
-		BUG_ON(reg == NULL);
-		paddr = of_translate_address(node, reg);
-		BUG_ON(paddr == OF_BAD_ADDR);
-	}
+	BUG_ON(flags & MPIC_USES_DCR);
+#endif
 
 	/* Map the global registers */
-	mpic_map(mpic, node, paddr, &mpic->gregs, MPIC_INFO(GREG_BASE), 0x1000);
-	mpic_map(mpic, node, paddr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000);
+	mpic_map(mpic, mpic->paddr, &mpic->gregs, MPIC_INFO(GREG_BASE), 0x1000);
+	mpic_map(mpic, mpic->paddr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000);
 
 	/* Reset */
 
 	/* When using a device-node, reset requests are only honored if the MPIC
 	 * is allowed to reset.
 	 */
-	if (mpic_reset_prohibited(node))
+	if (of_get_property(mpic->node, "pic-no-reset", NULL))
 		mpic->flags |= MPIC_NO_RESET;
 
 	if ((flags & MPIC_WANTS_RESET) && !(mpic->flags & MPIC_NO_RESET)) {
@@ -1307,7 +1331,7 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 	for_each_possible_cpu(i) {
 		unsigned int cpu = get_hard_smp_processor_id(i);
 
-		mpic_map(mpic, node, paddr, &mpic->cpuregs[cpu],
+		mpic_map(mpic, mpic->paddr, &mpic->cpuregs[cpu],
 			 MPIC_INFO(CPU_BASE) + cpu * MPIC_INFO(CPU_STRIDE),
 			 0x1000);
 	}
@@ -1315,16 +1339,21 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 	/* Initialize main ISU if none provided */
 	if (mpic->isu_size == 0) {
 		mpic->isu_size = mpic->num_sources;
-		mpic_map(mpic, node, paddr, &mpic->isus[0],
+		mpic_map(mpic, mpic->paddr, &mpic->isus[0],
 			 MPIC_INFO(IRQ_BASE), MPIC_INFO(IRQ_STRIDE) * mpic->isu_size);
 	}
 	mpic->isu_shift = 1 + __ilog2(mpic->isu_size - 1);
 	mpic->isu_mask = (1 << mpic->isu_shift) - 1;
 
-	mpic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
+	mpic->irqhost = irq_alloc_host(mpic->node, IRQ_HOST_MAP_LINEAR,
 				       isu_size ? isu_size : mpic->num_sources,
 				       &mpic_host_ops,
 				       flags & MPIC_LARGE_VECTORS ? 2048 : 256);
+
+	/*
+	 * FIXME: The code leaks the MPIC object and mappings here; this
+	 * is very unlikely to fail but it ought to be fixed anyways.
+	 */
 	if (mpic->irqhost == NULL)
 		return NULL;
 
@@ -1347,19 +1376,23 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 	}
 	printk(KERN_INFO "mpic: Setting up MPIC \"%s\" version %s at %llx,"
 	       " max %d CPUs\n",
-	       name, vers, (unsigned long long)paddr, num_possible_cpus());
+	       name, vers, (unsigned long long)mpic->paddr, num_possible_cpus());
 	printk(KERN_INFO "mpic: ISU size: %d, shift: %d, mask: %x\n",
 	       mpic->isu_size, mpic->isu_shift, mpic->isu_mask);
 
 	mpic->next = mpics;
 	mpics = mpic;
 
-	if (flags & MPIC_PRIMARY) {
+	if (!(flags & MPIC_SECONDARY)) {
 		mpic_primary = mpic;
 		irq_set_default_host(mpic->irqhost);
 	}
 
 	return mpic;
+
+err_of_node_put:
+	of_node_put(node);
+	return NULL;
 }
 
 void __init mpic_assign_isu(struct mpic *mpic, unsigned int isu_num,
@@ -1369,7 +1402,7 @@ void __init mpic_assign_isu(struct mpic *mpic, unsigned int isu_num,
 
 	BUG_ON(isu_num >= MPIC_MAX_ISU);
 
-	mpic_map(mpic, mpic->irqhost->of_node,
+	mpic_map(mpic,
 		 paddr, &mpic->isus[isu_num], 0,
 		 MPIC_INFO(IRQ_STRIDE) * mpic->isu_size);
 
@@ -1385,8 +1418,7 @@ void __init mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count)
 
 void __init mpic_init(struct mpic *mpic)
 {
-	int i;
-	int cpu;
+	int i, cpu;
 
 	BUG_ON(mpic->num_sources == 0);
 
@@ -1424,7 +1456,7 @@ void __init mpic_init(struct mpic *mpic)
 
 	/* Do the HT PIC fixups on U3 broken mpic */
 	DBG("MPIC flags: %x\n", mpic->flags);
-	if ((mpic->flags & MPIC_U3_HT_IRQS) && (mpic->flags & MPIC_PRIMARY)) {
+	if ((mpic->flags & MPIC_U3_HT_IRQS) && !(mpic->flags & MPIC_SECONDARY)) {
 		mpic_scan_ht_pics(mpic);
 		mpic_u3msi_init(mpic);
 	}
@@ -1471,6 +1503,17 @@ void __init mpic_init(struct mpic *mpic)
 				  GFP_KERNEL);
 	BUG_ON(mpic->save_data == NULL);
 #endif
+
+	/* Check if this MPIC is chained from a parent interrupt controller */
+	if (mpic->flags & MPIC_SECONDARY) {
+		int virq = irq_of_parse_and_map(mpic->node, 0);
+		if (virq != NO_IRQ) {
+			printk(KERN_INFO "%s: hooking up to IRQ %d\n",
+					mpic->node->full_name, virq);
+			irq_set_handler_data(virq, mpic);
+			irq_set_chained_handler(virq, &mpic_cascade);
+		}
+	}
 }
 
 void __init mpic_set_clk_ratio(struct mpic *mpic, u32 clock_ratio)
diff --git a/arch/powerpc/sysdev/ppc4xx_cpm.c b/arch/powerpc/sysdev/ppc4xx_cpm.c
index 73b86cc..82e2cfe 100644
--- a/arch/powerpc/sysdev/ppc4xx_cpm.c
+++ b/arch/powerpc/sysdev/ppc4xx_cpm.c
@@ -179,12 +179,12 @@ static struct kobj_attribute cpm_idle_attr =
 
 static void cpm_idle_config_sysfs(void)
 {
-	struct sys_device *sys_dev;
+	struct device *dev;
 	unsigned long ret;
 
-	sys_dev = get_cpu_sysdev(0);
+	dev = get_cpu_device(0);
 
-	ret = sysfs_create_file(&sys_dev->kobj,
+	ret = sysfs_create_file(&dev->kobj,
 				&cpm_idle_attr.attr);
 	if (ret)
 		printk(KERN_WARNING
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c
index 862f11b..4f05f75 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.c
+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
@@ -185,9 +185,15 @@ static int __init ppc4xx_parse_dma_ranges(struct pci_controller *hose,
  out:
 	dma_offset_set = 1;
 	pci_dram_offset = res->start;
+	hose->dma_window_base_cur = res->start;
+	hose->dma_window_size = resource_size(res);
 
 	printk(KERN_INFO "4xx PCI DMA offset set to 0x%08lx\n",
 	       pci_dram_offset);
+	printk(KERN_INFO "4xx PCI DMA window base to 0x%016llx\n",
+	       (unsigned long long)hose->dma_window_base_cur);
+	printk(KERN_INFO "DMA window size 0x%016llx\n",
+	       (unsigned long long)hose->dma_window_size);
 	return 0;
 }
 
@@ -647,6 +653,7 @@ static unsigned int ppc4xx_pciex_port_count;
 
 struct ppc4xx_pciex_hwops
 {
+	bool want_sdr;
 	int (*core_init)(struct device_node *np);
 	int (*port_init_hw)(struct ppc4xx_pciex_port *port);
 	int (*setup_utl)(struct ppc4xx_pciex_port *port);
@@ -916,6 +923,7 @@ static int ppc440speB_pciex_init_utl(struct ppc4xx_pciex_port *port)
 
 static struct ppc4xx_pciex_hwops ppc440speA_pcie_hwops __initdata =
 {
+	.want_sdr	= true,
 	.core_init	= ppc440spe_pciex_core_init,
 	.port_init_hw	= ppc440speA_pciex_init_port_hw,
 	.setup_utl	= ppc440speA_pciex_init_utl,
@@ -924,6 +932,7 @@ static struct ppc4xx_pciex_hwops ppc440speA_pcie_hwops __initdata =
 
 static struct ppc4xx_pciex_hwops ppc440speB_pcie_hwops __initdata =
 {
+	.want_sdr	= true,
 	.core_init	= ppc440spe_pciex_core_init,
 	.port_init_hw	= ppc440speB_pciex_init_port_hw,
 	.setup_utl	= ppc440speB_pciex_init_utl,
@@ -1034,6 +1043,7 @@ static int ppc460ex_pciex_init_utl(struct ppc4xx_pciex_port *port)
 
 static struct ppc4xx_pciex_hwops ppc460ex_pcie_hwops __initdata =
 {
+	.want_sdr	= true,
 	.core_init	= ppc460ex_pciex_core_init,
 	.port_init_hw	= ppc460ex_pciex_init_port_hw,
 	.setup_utl	= ppc460ex_pciex_init_utl,
@@ -1181,6 +1191,7 @@ done:
 }
 
 static struct ppc4xx_pciex_hwops ppc460sx_pcie_hwops __initdata = {
+	.want_sdr	= true,
 	.core_init	= ppc460sx_pciex_core_init,
 	.port_init_hw	= ppc460sx_pciex_init_port_hw,
 	.setup_utl	= ppc460sx_pciex_init_utl,
@@ -1276,6 +1287,7 @@ static int ppc405ex_pciex_init_utl(struct ppc4xx_pciex_port *port)
 
 static struct ppc4xx_pciex_hwops ppc405ex_pcie_hwops __initdata =
 {
+	.want_sdr	= true,
 	.core_init	= ppc405ex_pciex_core_init,
 	.port_init_hw	= ppc405ex_pciex_init_port_hw,
 	.setup_utl	= ppc405ex_pciex_init_utl,
@@ -1284,6 +1296,52 @@ static struct ppc4xx_pciex_hwops ppc405ex_pcie_hwops __initdata =
 
 #endif /* CONFIG_40x */
 
+#ifdef CONFIG_476FPE
+static int __init ppc_476fpe_pciex_core_init(struct device_node *np)
+{
+	return 4;
+}
+
+static void __init ppc_476fpe_pciex_check_link(struct ppc4xx_pciex_port *port)
+{
+	u32 timeout_ms = 20;
+	u32 val = 0, mask = (PECFG_TLDLP_LNKUP|PECFG_TLDLP_PRESENT);
+	void __iomem *mbase = ioremap(port->cfg_space.start + 0x10000000,
+	                              0x1000);
+
+	printk(KERN_INFO "PCIE%d: Checking link...\n", port->index);
+
+	if (mbase == NULL) {
+		printk(KERN_WARNING "PCIE%d: failed to get cfg space\n",
+		                    port->index);
+		return;
+	}
+		
+	while (timeout_ms--) {
+		val = in_le32(mbase + PECFG_TLDLP);
+
+		if ((val & mask) == mask)
+			break;
+		msleep(10);
+	}
+
+	if (val & PECFG_TLDLP_PRESENT) {
+		printk(KERN_INFO "PCIE%d: link is up !\n", port->index);
+		port->link = 1;
+	} else
+		printk(KERN_WARNING "PCIE%d: Link up failed\n", port->index);
+
+	iounmap(mbase);
+	return;
+}
+
+static struct ppc4xx_pciex_hwops ppc_476fpe_pcie_hwops __initdata =
+{
+	.core_init	= ppc_476fpe_pciex_core_init,
+	.check_link	= ppc_476fpe_pciex_check_link,
+};
+#endif /* CONFIG_476FPE */
+
 /* Check that the core has been initied and if not, do it */
 static int __init ppc4xx_pciex_check_core_init(struct device_node *np)
 {
@@ -1309,6 +1367,10 @@ static int __init ppc4xx_pciex_check_core_init(struct device_node *np)
 	if (of_device_is_compatible(np, "ibm,plb-pciex-405ex"))
 		ppc4xx_pciex_hwops = &ppc405ex_pcie_hwops;
 #endif
+#ifdef CONFIG_476FPE
+	if (of_device_is_compatible(np, "ibm,plb-pciex-476fpe"))
+		ppc4xx_pciex_hwops = &ppc_476fpe_pcie_hwops;
+#endif
 	if (ppc4xx_pciex_hwops == NULL) {
 		printk(KERN_WARNING "PCIE: unknown host type %s\n",
 		       np->full_name);
@@ -1617,6 +1679,10 @@ static int __init ppc4xx_setup_one_pciex_POM(struct ppc4xx_pciex_port	*port,
 			dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL,
 				sa | DCRO_PEGPL_460SX_OMR1MSKL_UOT
 					| DCRO_PEGPL_OMRxMSKL_VAL);
+		else if (of_device_is_compatible(port->node, "ibm,plb-pciex-476fpe"))
+			dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL,
+				sa | DCRO_PEGPL_476FPE_OMR1MSKL_UOT
+					| DCRO_PEGPL_OMRxMSKL_VAL);
 		else
 			dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL,
 				sa | DCRO_PEGPL_OMR1MSKL_UOT
@@ -1739,9 +1805,10 @@ static void __init ppc4xx_configure_pciex_PIMs(struct ppc4xx_pciex_port *port,
 		/* Calculate window size */
 		sa = (0xffffffffffffffffull << ilog2(size));
 		if (res->flags & IORESOURCE_PREFETCH)
-			sa |= 0x8;
+			sa |= PCI_BASE_ADDRESS_MEM_PREFETCH;
 
-		if (of_device_is_compatible(port->node, "ibm,plb-pciex-460sx"))
+		if (of_device_is_compatible(port->node, "ibm,plb-pciex-460sx") ||
+		    of_device_is_compatible(port->node, "ibm,plb-pciex-476fpe"))
 			sa |= PCI_BASE_ADDRESS_MEM_TYPE_64;
 
 		out_le32(mbase + PECFG_BAR0HMPA, RES_TO_U32_HIGH(sa));
@@ -1972,13 +2039,15 @@ static void __init ppc4xx_probe_pciex_bridge(struct device_node *np)
 	}
 
 	port->node = of_node_get(np);
-	pval = of_get_property(np, "sdr-base", NULL);
-	if (pval == NULL) {
-		printk(KERN_ERR "PCIE: missing sdr-base for %s\n",
-		       np->full_name);
-		return;
+	if (ppc4xx_pciex_hwops->want_sdr) {
+		pval = of_get_property(np, "sdr-base", NULL);
+		if (pval == NULL) {
+			printk(KERN_ERR "PCIE: missing sdr-base for %s\n",
+			       np->full_name);
+			return;
+		}
+		port->sdr_base = *pval;
 	}
-	port->sdr_base = *pval;
 
 	/* Check if device_type property is set to "pci" or "pci-endpoint".
 	 * Resulting from this setup this PCIe port will be configured
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.h b/arch/powerpc/sysdev/ppc4xx_pci.h
index 32ce763..bb48219 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.h
+++ b/arch/powerpc/sysdev/ppc4xx_pci.h
@@ -476,6 +476,13 @@
 #define DCRO_PEGPL_OMR1MSKL_UOT	 0x00000002
 #define DCRO_PEGPL_OMR3MSKL_IO	 0x00000002
 
+/* 476FPE */
+#define PCCFG_LCPA			0x270
+#define PECFG_TLDLP			0x3F8
+#define PECFG_TLDLP_LNKUP		0x00000008
+#define PECFG_TLDLP_PRESENT		0x00000010
+#define DCRO_PEGPL_476FPE_OMR1MSKL_UOT	 0x00000004
+
 /* SDR Bit Mappings */
 #define PESDRx_RCSSET_HLDPLB	0x10000000
 #define PESDRx_RCSSET_RSTGU	0x01000000
diff --git a/arch/powerpc/sysdev/qe_lib/gpio.c b/arch/powerpc/sysdev/qe_lib/gpio.c
index e23f23c..521e67a 100644
--- a/arch/powerpc/sysdev/qe_lib/gpio.c
+++ b/arch/powerpc/sysdev/qe_lib/gpio.c
@@ -139,14 +139,10 @@ struct qe_pin {
 struct qe_pin *qe_pin_request(struct device_node *np, int index)
 {
 	struct qe_pin *qe_pin;
-	struct device_node *gpio_np;
 	struct gpio_chip *gc;
 	struct of_mm_gpio_chip *mm_gc;
 	struct qe_gpio_chip *qe_gc;
 	int err;
-	int size;
-	const void *gpio_spec;
-	const u32 *gpio_cells;
 	unsigned long flags;
 
 	qe_pin = kzalloc(sizeof(*qe_pin), GFP_KERNEL);
@@ -155,45 +151,25 @@ struct qe_pin *qe_pin_request(struct device_node *np, int index)
 		return ERR_PTR(-ENOMEM);
 	}
 
-	err = of_parse_phandles_with_args(np, "gpios", "#gpio-cells", index,
-					  &gpio_np, &gpio_spec);
-	if (err) {
-		pr_debug("%s: can't parse gpios property\n", __func__);
+	err = of_get_gpio(np, index);
+	if (err < 0)
+		goto err0;
+	gc = gpio_to_chip(err);
+	if (WARN_ON(!gc))
 		goto err0;
-	}
 
-	if (!of_device_is_compatible(gpio_np, "fsl,mpc8323-qe-pario-bank")) {
+	if (!of_device_is_compatible(gc->of_node, "fsl,mpc8323-qe-pario-bank")) {
 		pr_debug("%s: tried to get a non-qe pin\n", __func__);
 		err = -EINVAL;
-		goto err1;
-	}
-
-	gc = of_node_to_gpiochip(gpio_np);
-	if (!gc) {
-		pr_debug("%s: gpio controller %s isn't registered\n",
-			 np->full_name, gpio_np->full_name);
-		err = -ENODEV;
-		goto err1;
-	}
-
-	gpio_cells = of_get_property(gpio_np, "#gpio-cells", &size);
-	if (!gpio_cells || size != sizeof(*gpio_cells) ||
-			*gpio_cells != gc->of_gpio_n_cells) {
-		pr_debug("%s: wrong #gpio-cells for %s\n",
-			 np->full_name, gpio_np->full_name);
-		err = -EINVAL;
-		goto err1;
+		goto err0;
 	}
 
-	err = gc->of_xlate(gc, np, gpio_spec, NULL);
-	if (err < 0)
-		goto err1;
-
 	mm_gc = to_of_mm_gpio_chip(gc);
 	qe_gc = to_qe_gpio_chip(mm_gc);
 
 	spin_lock_irqsave(&qe_gc->lock, flags);
 
+	err -= gc->base;
 	if (test_and_set_bit(QE_PIN_REQUESTED, &qe_gc->pin_flags[err]) == 0) {
 		qe_pin->controller = qe_gc;
 		qe_pin->num = err;
@@ -206,8 +182,6 @@ struct qe_pin *qe_pin_request(struct device_node *np, int index)
 
 	if (!err)
 		return qe_pin;
-err1:
-	of_node_put(gpio_np);
 err0:
 	kfree(qe_pin);
 	pr_debug("%s failed with status %d\n", __func__, err);
diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c
index 18e75ca..73034bd 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_ic.c
+++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c
@@ -22,7 +22,6 @@
 #include <linux/stddef.h>
 #include <linux/sched.h>
 #include <linux/signal.h>
-#include <linux/sysdev.h>
 #include <linux/device.h>
 #include <linux/bootmem.h>
 #include <linux/spinlock.h>
@@ -484,13 +483,14 @@ int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high)
 	return 0;
 }
 
-static struct sysdev_class qe_ic_sysclass = {
+static struct bus_type qe_ic_subsys = {
 	.name = "qe_ic",
+	.dev_name = "qe_ic",
 };
 
-static struct sys_device device_qe_ic = {
+static struct device device_qe_ic = {
 	.id = 0,
-	.cls = &qe_ic_sysclass,
+	.bus = &qe_ic_subsys,
 };
 
 static int __init init_qe_ic_sysfs(void)
@@ -499,12 +499,12 @@ static int __init init_qe_ic_sysfs(void)
 
 	printk(KERN_DEBUG "Registering qe_ic with sysfs...\n");
 
-	rc = sysdev_class_register(&qe_ic_sysclass);
+	rc = subsys_system_register(&qe_ic_subsys, NULL);
 	if (rc) {
 		printk(KERN_ERR "Failed registering qe_ic sys class\n");
 		return -ENODEV;
 	}
-	rc = sysdev_register(&device_qe_ic);
+	rc = device_register(&device_qe_ic);
 	if (rc) {
 		printk(KERN_ERR "Failed registering qe_ic sys device\n");
 		return -ENODEV;
diff --git a/arch/powerpc/sysdev/uic.c b/arch/powerpc/sysdev/uic.c
index 3330fec..063c901 100644
--- a/arch/powerpc/sysdev/uic.c
+++ b/arch/powerpc/sysdev/uic.c
@@ -18,7 +18,6 @@
 #include <linux/stddef.h>
 #include <linux/sched.h>
 #include <linux/signal.h>
-#include <linux/sysdev.h>
 #include <linux/device.h>
 #include <linux/bootmem.h>
 #include <linux/spinlock.h>
diff --git a/arch/powerpc/sysdev/xics/icp-hv.c b/arch/powerpc/sysdev/xics/icp-hv.c
index 9518d36..253dce9 100644
--- a/arch/powerpc/sysdev/xics/icp-hv.c
+++ b/arch/powerpc/sysdev/xics/icp-hv.c
@@ -27,33 +27,50 @@ static inline unsigned int icp_hv_get_xirr(unsigned char cppr)
 {
 	unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
 	long rc;
+	unsigned int ret = XICS_IRQ_SPURIOUS;
 
 	rc = plpar_hcall(H_XIRR, retbuf, cppr);
-	if (rc != H_SUCCESS)
-		panic(" bad return code xirr - rc = %lx\n", rc);
-	return (unsigned int)retbuf[0];
-}
+	if (rc == H_SUCCESS) {
+		ret = (unsigned int)retbuf[0];
+	} else {
+		pr_err("%s: bad return code xirr cppr=0x%x returned %ld\n",
+			__func__, cppr, rc);
+		WARN_ON_ONCE(1);
+	}
 
-static inline void icp_hv_set_xirr(unsigned int value)
-{
-	long rc = plpar_hcall_norets(H_EOI, value);
-	if (rc != H_SUCCESS)
-		panic("bad return code EOI - rc = %ld, value=%x\n", rc, value);
+	return ret;
 }
 
 static inline void icp_hv_set_cppr(u8 value)
 {
 	long rc = plpar_hcall_norets(H_CPPR, value);
-	if (rc != H_SUCCESS)
-		panic("bad return code cppr - rc = %lx\n", rc);
+	if (rc != H_SUCCESS) {
+		pr_err("%s: bad return code cppr cppr=0x%x returned %ld\n",
+			__func__, value, rc);
+		WARN_ON_ONCE(1);
+	}
+}
+
+static inline void icp_hv_set_xirr(unsigned int value)
+{
+	long rc = plpar_hcall_norets(H_EOI, value);
+	if (rc != H_SUCCESS) {
+		pr_err("%s: bad return code eoi xirr=0x%x returned %ld\n",
+			__func__, value, rc);
+		WARN_ON_ONCE(1);
+		icp_hv_set_cppr(value >> 24);
+	}
 }
 
 static inline void icp_hv_set_qirr(int n_cpu , u8 value)
 {
-	long rc = plpar_hcall_norets(H_IPI, get_hard_smp_processor_id(n_cpu),
-				     value);
-	if (rc != H_SUCCESS)
-		panic("bad return code qirr - rc = %lx\n", rc);
+	int hw_cpu = get_hard_smp_processor_id(n_cpu);
+	long rc = plpar_hcall_norets(H_IPI, hw_cpu, value);
+	if (rc != H_SUCCESS) {
+		pr_err("%s: bad return code qirr cpu=%d hw_cpu=%d mfrr=0x%x "
+			"returned %ld\n", __func__, n_cpu, hw_cpu, value, rc);
+		WARN_ON_ONCE(1);
+	}
 }
 
 static void icp_hv_eoi(struct irq_data *d)
diff --git a/arch/powerpc/sysdev/xics/xics-common.c b/arch/powerpc/sysdev/xics/xics-common.c
index 63762c6..d72eda6 100644
--- a/arch/powerpc/sysdev/xics/xics-common.c
+++ b/arch/powerpc/sysdev/xics/xics-common.c
@@ -137,7 +137,7 @@ static void xics_request_ipi(void)
 	 * IPIs are marked IRQF_PERCPU. The handler was set in map.
 	 */
 	BUG_ON(request_irq(ipi, icp_ops->ipi_action,
-			   IRQF_PERCPU, "IPI", NULL));
+			   IRQF_PERCPU | IRQF_NO_THREAD, "IPI", NULL));
 }
 
 int __init xics_smp_probe(void)
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 03a217a..cb95eea 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -228,13 +228,11 @@ Commands:\n\
   t	print backtrace\n\
   x	exit monitor and recover\n\
   X	exit monitor and dont recover\n"
-#ifdef CONFIG_PPC64
+#if defined(CONFIG_PPC64) && !defined(CONFIG_PPC_BOOK3E)
 "  u	dump segment table or SLB\n"
-#endif
-#ifdef CONFIG_PPC_STD_MMU_32
+#elif defined(CONFIG_PPC_STD_MMU_32)
 "  u	dump segment registers\n"
-#endif
-#ifdef CONFIG_44x
+#elif defined(CONFIG_44x) || defined(CONFIG_PPC_BOOK3E)
 "  u	dump TLB\n"
 #endif
 "  ?	help\n"
@@ -340,7 +338,7 @@ int cpus_are_in_xmon(void)
 
 static inline int unrecoverable_excp(struct pt_regs *regs)
 {
-#if defined(CONFIG_4xx) || defined(CONFIG_BOOK3E)
+#if defined(CONFIG_4xx) || defined(CONFIG_PPC_BOOK3E)
 	/* We have no MSR_RI bit on 4xx or Book3e, so we simply return false */
 	return 0;
 #else
@@ -885,13 +883,11 @@ cmds(struct pt_regs *excp)
 		case 'u':
 			dump_segments();
 			break;
-#endif
-#ifdef CONFIG_4xx
+#elif defined(CONFIG_4xx)
 		case 'u':
 			dump_tlb_44x();
 			break;
-#endif
-#ifdef CONFIG_PPC_BOOK3E
+#elif defined(CONFIG_PPC_BOOK3E)
 		case 'u':
 			dump_tlb_book3e();
 			break;
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 373679b..28d183c 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -87,11 +87,13 @@ config S390
 	select HAVE_KERNEL_LZMA
 	select HAVE_KERNEL_LZO
 	select HAVE_KERNEL_XZ
-	select HAVE_GET_USER_PAGES_FAST
 	select HAVE_ARCH_MUTEX_CPU_RELAX
 	select HAVE_ARCH_JUMP_LABEL if !MARCH_G5
 	select HAVE_RCU_TABLE_FREE if SMP
 	select ARCH_SAVE_PAGE_KEYS if HIBERNATION
+	select HAVE_MEMBLOCK
+	select HAVE_MEMBLOCK_NODE_MAP
+	select ARCH_DISCARD_MEMBLOCK
 	select ARCH_INLINE_SPIN_TRYLOCK
 	select ARCH_INLINE_SPIN_TRYLOCK_BH
 	select ARCH_INLINE_SPIN_LOCK
@@ -345,9 +347,6 @@ config WARN_DYNAMIC_STACK
 
 	  Say N if you are unsure.
 
-config ARCH_POPULATES_NODE_MAP
-	def_bool y
-
 comment "Kernel preemption"
 
 source "kernel/Kconfig.preempt"
diff --git a/arch/s390/appldata/appldata_os.c b/arch/s390/appldata/appldata_os.c
index 92f1cb7..4de031d6 100644
--- a/arch/s390/appldata/appldata_os.c
+++ b/arch/s390/appldata/appldata_os.c
@@ -115,21 +115,21 @@ static void appldata_get_os_data(void *data)
 	j = 0;
 	for_each_online_cpu(i) {
 		os_data->os_cpu[j].per_cpu_user =
-			cputime_to_jiffies(kstat_cpu(i).cpustat.user);
+			cputime_to_jiffies(kcpustat_cpu(i).cpustat[CPUTIME_USER]);
 		os_data->os_cpu[j].per_cpu_nice =
-			cputime_to_jiffies(kstat_cpu(i).cpustat.nice);
+			cputime_to_jiffies(kcpustat_cpu(i).cpustat[CPUTIME_NICE]);
 		os_data->os_cpu[j].per_cpu_system =
-			cputime_to_jiffies(kstat_cpu(i).cpustat.system);
+			cputime_to_jiffies(kcpustat_cpu(i).cpustat[CPUTIME_SYSTEM]);
 		os_data->os_cpu[j].per_cpu_idle =
-			cputime_to_jiffies(kstat_cpu(i).cpustat.idle);
+			cputime_to_jiffies(kcpustat_cpu(i).cpustat[CPUTIME_IDLE]);
 		os_data->os_cpu[j].per_cpu_irq =
-			cputime_to_jiffies(kstat_cpu(i).cpustat.irq);
+			cputime_to_jiffies(kcpustat_cpu(i).cpustat[CPUTIME_IRQ]);
 		os_data->os_cpu[j].per_cpu_softirq =
-			cputime_to_jiffies(kstat_cpu(i).cpustat.softirq);
+			cputime_to_jiffies(kcpustat_cpu(i).cpustat[CPUTIME_SOFTIRQ]);
 		os_data->os_cpu[j].per_cpu_iowait =
-			cputime_to_jiffies(kstat_cpu(i).cpustat.iowait);
+			cputime_to_jiffies(kcpustat_cpu(i).cpustat[CPUTIME_IOWAIT]);
 		os_data->os_cpu[j].per_cpu_steal =
-			cputime_to_jiffies(kstat_cpu(i).cpustat.steal);
+			cputime_to_jiffies(kcpustat_cpu(i).cpustat[CPUTIME_STEAL]);
 		os_data->os_cpu[j].cpu_id = i;
 		j++;
 	}
diff --git a/arch/s390/hypfs/inode.c b/arch/s390/hypfs/inode.c
index 481f4f7..8a2a887 100644
--- a/arch/s390/hypfs/inode.c
+++ b/arch/s390/hypfs/inode.c
@@ -97,7 +97,7 @@ static void hypfs_delete_tree(struct dentry *root)
 	}
 }
 
-static struct inode *hypfs_make_inode(struct super_block *sb, int mode)
+static struct inode *hypfs_make_inode(struct super_block *sb, umode_t mode)
 {
 	struct inode *ret = new_inode(sb);
 
@@ -107,7 +107,7 @@ static struct inode *hypfs_make_inode(struct super_block *sb, int mode)
 		ret->i_uid = hypfs_info->uid;
 		ret->i_gid = hypfs_info->gid;
 		ret->i_atime = ret->i_mtime = ret->i_ctime = CURRENT_TIME;
-		if (mode & S_IFDIR)
+		if (S_ISDIR(mode))
 			set_nlink(ret, 2);
 	}
 	return ret;
@@ -259,9 +259,9 @@ static int hypfs_parse_options(char *options, struct super_block *sb)
 	return 0;
 }
 
-static int hypfs_show_options(struct seq_file *s, struct vfsmount *mnt)
+static int hypfs_show_options(struct seq_file *s, struct dentry *root)
 {
-	struct hypfs_sb_info *hypfs_info = mnt->mnt_sb->s_fs_info;
+	struct hypfs_sb_info *hypfs_info = root->d_sb->s_fs_info;
 
 	seq_printf(s, ",uid=%u", hypfs_info->uid);
 	seq_printf(s, ",gid=%u", hypfs_info->gid);
@@ -333,7 +333,7 @@ static void hypfs_kill_super(struct super_block *sb)
 
 static struct dentry *hypfs_create_file(struct super_block *sb,
 					struct dentry *parent, const char *name,
-					char *data, mode_t mode)
+					char *data, umode_t mode)
 {
 	struct dentry *dentry;
 	struct inode *inode;
@@ -350,13 +350,13 @@ static struct dentry *hypfs_create_file(struct super_block *sb,
 		dentry = ERR_PTR(-ENOMEM);
 		goto fail;
 	}
-	if (mode & S_IFREG) {
+	if (S_ISREG(mode)) {
 		inode->i_fop = &hypfs_file_ops;
 		if (data)
 			inode->i_size = strlen(data);
 		else
 			inode->i_size = 0;
-	} else if (mode & S_IFDIR) {
+	} else if (S_ISDIR(mode)) {
 		inode->i_op = &simple_dir_inode_operations;
 		inode->i_fop = &simple_dir_operations;
 		inc_nlink(parent->d_inode);
diff --git a/arch/s390/include/asm/cputime.h b/arch/s390/include/asm/cputime.h
index 0814348..c23c390 100644
--- a/arch/s390/include/asm/cputime.h
+++ b/arch/s390/include/asm/cputime.h
@@ -16,114 +16,100 @@
 
 /* We want to use full resolution of the CPU timer: 2**-12 micro-seconds. */
 
-typedef unsigned long long cputime_t;
-typedef unsigned long long cputime64_t;
+typedef unsigned long long __nocast cputime_t;
+typedef unsigned long long __nocast cputime64_t;
 
-#ifndef __s390x__
-
-static inline unsigned int
-__div(unsigned long long n, unsigned int base)
+static inline unsigned long __div(unsigned long long n, unsigned long base)
 {
+#ifndef __s390x__
 	register_pair rp;
 
 	rp.pair = n >> 1;
 	asm ("dr %0,%1" : "+d" (rp) : "d" (base >> 1));
 	return rp.subreg.odd;
+#else /* __s390x__ */
+	return n / base;
+#endif /* __s390x__ */
 }
 
-#else /* __s390x__ */
+#define cputime_one_jiffy		jiffies_to_cputime(1)
+
+/*
+ * Convert cputime to jiffies and back.
+ */
+static inline unsigned long cputime_to_jiffies(const cputime_t cputime)
+{
+	return __div((__force unsigned long long) cputime, 4096000000ULL / HZ);
+}
 
-static inline unsigned int
-__div(unsigned long long n, unsigned int base)
+static inline cputime_t jiffies_to_cputime(const unsigned int jif)
 {
-	return n / base;
+	return (__force cputime_t)(jif * (4096000000ULL / HZ));
 }
 
-#endif /* __s390x__ */
+static inline u64 cputime64_to_jiffies64(cputime64_t cputime)
+{
+	unsigned long long jif = (__force unsigned long long) cputime;
+	do_div(jif, 4096000000ULL / HZ);
+	return jif;
+}
 
-#define cputime_zero			(0ULL)
-#define cputime_one_jiffy		jiffies_to_cputime(1)
-#define cputime_max			((~0UL >> 1) - 1)
-#define cputime_add(__a, __b)		((__a) +  (__b))
-#define cputime_sub(__a, __b)		((__a) -  (__b))
-#define cputime_div(__a, __n) ({		\
-	unsigned long long __div = (__a);	\
-	do_div(__div,__n);			\
-	__div;					\
-})
-#define cputime_halve(__a)		((__a) >> 1)
-#define cputime_eq(__a, __b)		((__a) == (__b))
-#define cputime_gt(__a, __b)		((__a) >  (__b))
-#define cputime_ge(__a, __b)		((__a) >= (__b))
-#define cputime_lt(__a, __b)		((__a) <  (__b))
-#define cputime_le(__a, __b)		((__a) <= (__b))
-#define cputime_to_jiffies(__ct)	(__div((__ct), 4096000000ULL / HZ))
-#define cputime_to_scaled(__ct)		(__ct)
-#define jiffies_to_cputime(__hz)	((cputime_t)(__hz) * (4096000000ULL / HZ))
-
-#define cputime64_zero			(0ULL)
-#define cputime64_add(__a, __b)		((__a) + (__b))
-#define cputime_to_cputime64(__ct)	(__ct)
-
-static inline u64
-cputime64_to_jiffies64(cputime64_t cputime)
-{
-	do_div(cputime, 4096000000ULL / HZ);
-	return cputime;
+static inline cputime64_t jiffies64_to_cputime64(const u64 jif)
+{
+	return (__force cputime64_t)(jif * (4096000000ULL / HZ));
 }
 
 /*
  * Convert cputime to microseconds and back.
  */
-static inline unsigned int
-cputime_to_usecs(const cputime_t cputime)
+static inline unsigned int cputime_to_usecs(const cputime_t cputime)
 {
-	return cputime_div(cputime, 4096);
+	return (__force unsigned long long) cputime >> 12;
 }
 
-static inline cputime_t
-usecs_to_cputime(const unsigned int m)
+static inline cputime_t usecs_to_cputime(const unsigned int m)
 {
-	return (cputime_t) m * 4096;
+	return (__force cputime_t)(m * 4096ULL);
 }
 
+#define usecs_to_cputime64(m)		usecs_to_cputime(m)
+
 /*
  * Convert cputime to milliseconds and back.
  */
-static inline unsigned int
-cputime_to_secs(const cputime_t cputime)
+static inline unsigned int cputime_to_secs(const cputime_t cputime)
 {
-	return __div(cputime, 2048000000) >> 1;
+	return __div((__force unsigned long long) cputime, 2048000000) >> 1;
 }
 
-static inline cputime_t
-secs_to_cputime(const unsigned int s)
+static inline cputime_t secs_to_cputime(const unsigned int s)
 {
-	return (cputime_t) s * 4096000000ULL;
+	return (__force cputime_t)(s * 4096000000ULL);
 }
 
 /*
  * Convert cputime to timespec and back.
  */
-static inline cputime_t
-timespec_to_cputime(const struct timespec *value)
+static inline cputime_t timespec_to_cputime(const struct timespec *value)
 {
-	return value->tv_nsec * 4096 / 1000 + (u64) value->tv_sec * 4096000000ULL;
+	unsigned long long ret = value->tv_sec * 4096000000ULL;
+	return (__force cputime_t)(ret + value->tv_nsec * 4096 / 1000);
 }
 
-static inline void
-cputime_to_timespec(const cputime_t cputime, struct timespec *value)
+static inline void cputime_to_timespec(const cputime_t cputime,
+				       struct timespec *value)
 {
+	unsigned long long __cputime = (__force unsigned long long) cputime;
 #ifndef __s390x__
 	register_pair rp;
 
-	rp.pair = cputime >> 1;
+	rp.pair = __cputime >> 1;
 	asm ("dr %0,%1" : "+d" (rp) : "d" (2048000000UL));
 	value->tv_nsec = rp.subreg.even * 1000 / 4096;
 	value->tv_sec = rp.subreg.odd;
 #else
-	value->tv_nsec = (cputime % 4096000000ULL) * 1000 / 4096;
-	value->tv_sec = cputime / 4096000000ULL;
+	value->tv_nsec = (__cputime % 4096000000ULL) * 1000 / 4096;
+	value->tv_sec = __cputime / 4096000000ULL;
 #endif
 }
 
@@ -132,50 +118,52 @@ cputime_to_timespec(const cputime_t cputime, struct timespec *value)
  * Since cputime and timeval have the same resolution (microseconds)
  * this is easy.
  */
-static inline cputime_t
-timeval_to_cputime(const struct timeval *value)
+static inline cputime_t timeval_to_cputime(const struct timeval *value)
 {
-	return value->tv_usec * 4096 + (u64) value->tv_sec * 4096000000ULL;
+	unsigned long long ret = value->tv_sec * 4096000000ULL;
+	return (__force cputime_t)(ret + value->tv_usec * 4096ULL);
 }
 
-static inline void
-cputime_to_timeval(const cputime_t cputime, struct timeval *value)
+static inline void cputime_to_timeval(const cputime_t cputime,
+				      struct timeval *value)
 {
+	unsigned long long __cputime = (__force unsigned long long) cputime;
 #ifndef __s390x__
 	register_pair rp;
 
-	rp.pair = cputime >> 1;
+	rp.pair = __cputime >> 1;
 	asm ("dr %0,%1" : "+d" (rp) : "d" (2048000000UL));
 	value->tv_usec = rp.subreg.even / 4096;
 	value->tv_sec = rp.subreg.odd;
 #else
-	value->tv_usec = (cputime % 4096000000ULL) / 4096;
-	value->tv_sec = cputime / 4096000000ULL;
+	value->tv_usec = (__cputime % 4096000000ULL) / 4096;
+	value->tv_sec = __cputime / 4096000000ULL;
 #endif
 }
 
 /*
  * Convert cputime to clock and back.
  */
-static inline clock_t
-cputime_to_clock_t(cputime_t cputime)
+static inline clock_t cputime_to_clock_t(cputime_t cputime)
 {
-	return cputime_div(cputime, 4096000000ULL / USER_HZ);
+	unsigned long long clock = (__force unsigned long long) cputime;
+	do_div(clock, 4096000000ULL / USER_HZ);
+	return clock;
 }
 
-static inline cputime_t
-clock_t_to_cputime(unsigned long x)
+static inline cputime_t clock_t_to_cputime(unsigned long x)
 {
-	return (cputime_t) x * (4096000000ULL / USER_HZ);
+	return (__force cputime_t)(x * (4096000000ULL / USER_HZ));
 }
 
 /*
  * Convert cputime64 to clock.
  */
-static inline clock_t
-cputime64_to_clock_t(cputime64_t cputime)
+static inline clock_t cputime64_to_clock_t(cputime64_t cputime)
 {
-       return cputime_div(cputime, 4096000000ULL / USER_HZ);
+	unsigned long long clock = (__force unsigned long long) cputime;
+	do_div(clock, 4096000000ULL / USER_HZ);
+	return clock;
 }
 
 struct s390_idle_data {
diff --git a/arch/s390/include/asm/debug.h b/arch/s390/include/asm/debug.h
index 18124b7..9d88db1 100644
--- a/arch/s390/include/asm/debug.h
+++ b/arch/s390/include/asm/debug.h
@@ -73,7 +73,7 @@ typedef struct debug_info {
 	struct dentry* debugfs_entries[DEBUG_MAX_VIEWS];
 	struct debug_view* views[DEBUG_MAX_VIEWS];	
 	char name[DEBUG_MAX_NAME_LEN];
-	mode_t mode;
+	umode_t mode;
 } debug_info_t;
 
 typedef int (debug_header_proc_t) (debug_info_t* id,
@@ -124,7 +124,7 @@ debug_info_t *debug_register(const char *name, int pages, int nr_areas,
                              int buf_size);
 
 debug_info_t *debug_register_mode(const char *name, int pages, int nr_areas,
-				  int buf_size, mode_t mode, uid_t uid,
+				  int buf_size, umode_t mode, uid_t uid,
 				  gid_t gid);
 
 void debug_unregister(debug_info_t* id);
diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
index 524d23b..4f289ff 100644
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -599,10 +599,10 @@ static inline pgste_t pgste_update_all(pte_t *ptep, pgste_t pgste)
 	skey = page_get_storage_key(address);
 	bits = skey & (_PAGE_CHANGED | _PAGE_REFERENCED);
 	/* Clear page changed & referenced bit in the storage key */
-	if (bits) {
-		skey ^= bits;
-		page_set_storage_key(address, skey, 1);
-	}
+	if (bits & _PAGE_CHANGED)
+		page_set_storage_key(address, skey ^ bits, 1);
+	else if (bits)
+		page_reset_referenced(address);
 	/* Transfer page changed & referenced bit to guest bits in pgste */
 	pgste_val(pgste) |= bits << 48;		/* RCP_GR_BIT & RCP_GC_BIT */
 	/* Get host changed & referenced bits from pgste */
diff --git a/arch/s390/include/asm/socket.h b/arch/s390/include/asm/socket.h
index fdff1e9..67b5c1b 100644
--- a/arch/s390/include/asm/socket.h
+++ b/arch/s390/include/asm/socket.h
@@ -70,4 +70,7 @@
 
 #define SO_RXQ_OVFL             40
 
+#define SO_WIFI_STATUS		41
+#define SCM_WIFI_STATUS		SO_WIFI_STATUS
+
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/s390/include/asm/thread_info.h b/arch/s390/include/asm/thread_info.h
index a231834..a730381 100644
--- a/arch/s390/include/asm/thread_info.h
+++ b/arch/s390/include/asm/thread_info.h
@@ -102,7 +102,6 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_MEMDIE		18	/* is terminating due to OOM killer */
 #define TIF_RESTORE_SIGMASK	19	/* restore signal mask in do_signal() */
 #define TIF_SINGLE_STEP		20	/* This task is single stepped */
-#define TIF_FREEZE		21	/* thread is freezing for suspend */
 
 #define _TIF_SYSCALL		(1<<TIF_SYSCALL)
 #define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
@@ -119,7 +118,6 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
 #define _TIF_31BIT		(1<<TIF_31BIT)
 #define _TIF_SINGLE_STEP	(1<<TIF_SINGLE_STEP)
-#define _TIF_FREEZE		(1<<TIF_FREEZE)
 
 #ifdef CONFIG_64BIT
 #define is_32bit_task()		(test_thread_flag(TIF_31BIT))
diff --git a/arch/s390/include/asm/types.h b/arch/s390/include/asm/types.h
index eeb52cc..05ebbcd 100644
--- a/arch/s390/include/asm/types.h
+++ b/arch/s390/include/asm/types.h
@@ -13,8 +13,6 @@
 
 #ifndef __ASSEMBLY__
 
-typedef unsigned short umode_t;
-
 /* A address type so that arithmetic can be done on it & it can be upgraded to
    64 bit when necessary 
 */
diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c
index 5ad6bc0..6848828 100644
--- a/arch/s390/kernel/debug.c
+++ b/arch/s390/kernel/debug.c
@@ -74,7 +74,7 @@ static ssize_t debug_input(struct file *file, const char __user *user_buf,
 static int debug_open(struct inode *inode, struct file *file);
 static int debug_close(struct inode *inode, struct file *file);
 static debug_info_t *debug_info_create(const char *name, int pages_per_area,
-			int nr_areas, int buf_size, mode_t mode);
+			int nr_areas, int buf_size, umode_t mode);
 static void debug_info_get(debug_info_t *);
 static void debug_info_put(debug_info_t *);
 static int debug_prolog_level_fn(debug_info_t * id,
@@ -330,7 +330,7 @@ debug_info_free(debug_info_t* db_info){
 
 static debug_info_t*
 debug_info_create(const char *name, int pages_per_area, int nr_areas,
-		  int buf_size, mode_t mode)
+		  int buf_size, umode_t mode)
 {
 	debug_info_t* rc;
 
@@ -688,7 +688,7 @@ debug_close(struct inode *inode, struct file *file)
  */
 
 debug_info_t *debug_register_mode(const char *name, int pages_per_area,
-				  int nr_areas, int buf_size, mode_t mode,
+				  int nr_areas, int buf_size, umode_t mode,
 				  uid_t uid, gid_t gid)
 {
 	debug_info_t *rc = NULL;
@@ -1090,7 +1090,7 @@ debug_register_view(debug_info_t * id, struct debug_view *view)
 	int rc = 0;
 	int i;
 	unsigned long flags;
-	mode_t mode;
+	umode_t mode;
 	struct dentry *pde;
 
 	if (!id)
diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index 9451b21..3201ae4 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -91,10 +91,12 @@ static void default_idle(void)
 void cpu_idle(void)
 {
 	for (;;) {
-		tick_nohz_stop_sched_tick(1);
+		tick_nohz_idle_enter();
+		rcu_idle_enter();
 		while (!need_resched())
 			default_idle();
-		tick_nohz_restart_sched_tick();
+		rcu_idle_exit();
+		tick_nohz_idle_exit();
 		preempt_enable_no_resched();
 		schedule();
 		preempt_disable();
diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index 450931a..573bc29 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -296,13 +296,6 @@ static int __poke_user(struct task_struct *child, addr_t addr, addr_t data)
 		     ((data & PSW_MASK_EA) && !(data & PSW_MASK_BA))))
 			/* Invalid psw mask. */
 			return -EINVAL;
-		if (addr == (addr_t) &dummy->regs.psw.addr)
-			/*
-			 * The debugger changed the instruction address,
-			 * reset system call restart, see signal.c:do_signal
-			 */
-			task_thread_info(child)->system_call = 0;
-
 		*(addr_t *)((addr_t) &task_pt_regs(child)->psw + addr) = data;
 
 	} else if (addr < (addr_t) (&dummy->regs.orig_gpr2)) {
@@ -614,11 +607,6 @@ static int __poke_user_compat(struct task_struct *child,
 			/* Transfer 31 bit amode bit to psw mask. */
 			regs->psw.mask = (regs->psw.mask & ~PSW_MASK_BA) |
 				(__u64)(tmp & PSW32_ADDR_AMODE);
-			/*
-			 * The debugger changed the instruction address,
-			 * reset system call restart, see signal.c:do_signal
-			 */
-			task_thread_info(child)->system_call = 0;
 		} else {
 			/* gpr 0-15 */
 			*(__u32*)((addr_t) &regs->psw + addr*2 + 4) = tmp;
@@ -905,6 +893,14 @@ static int s390_last_break_get(struct task_struct *target,
 	return 0;
 }
 
+static int s390_last_break_set(struct task_struct *target,
+			       const struct user_regset *regset,
+			       unsigned int pos, unsigned int count,
+			       const void *kbuf, const void __user *ubuf)
+{
+	return 0;
+}
+
 #endif
 
 static int s390_system_call_get(struct task_struct *target,
@@ -951,6 +947,7 @@ static const struct user_regset s390_regsets[] = {
 		.size = sizeof(long),
 		.align = sizeof(long),
 		.get = s390_last_break_get,
+		.set = s390_last_break_set,
 	},
 #endif
 	[REGSET_SYSTEM_CALL] = {
@@ -1116,6 +1113,14 @@ static int s390_compat_last_break_get(struct task_struct *target,
 	return 0;
 }
 
+static int s390_compat_last_break_set(struct task_struct *target,
+				      const struct user_regset *regset,
+				      unsigned int pos, unsigned int count,
+				      const void *kbuf, const void __user *ubuf)
+{
+	return 0;
+}
+
 static const struct user_regset s390_compat_regsets[] = {
 	[REGSET_GENERAL] = {
 		.core_note_type = NT_PRSTATUS,
@@ -1139,6 +1144,7 @@ static const struct user_regset s390_compat_regsets[] = {
 		.size = sizeof(long),
 		.align = sizeof(long),
 		.get = s390_compat_last_break_get,
+		.set = s390_compat_last_break_set,
 	},
 	[REGSET_SYSTEM_CALL] = {
 		.core_note_type = NT_S390_SYSTEM_CALL,
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index e58a462..f11d1b0 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -21,6 +21,7 @@
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
+#include <linux/memblock.h>
 #include <linux/mm.h>
 #include <linux/stddef.h>
 #include <linux/unistd.h>
@@ -579,7 +580,7 @@ static unsigned long __init find_crash_base(unsigned long crash_size,
 		*msg = "first memory chunk must be at least crashkernel size";
 		return 0;
 	}
-	if (is_kdump_kernel() && (crash_size == OLDMEM_SIZE))
+	if (OLDMEM_BASE && crash_size == OLDMEM_SIZE)
 		return OLDMEM_BASE;
 
 	for (i = MEMORY_CHUNKS - 1; i >= 0; i--) {
@@ -820,7 +821,8 @@ setup_memory(void)
 		end_chunk = min(end_chunk, end_pfn);
 		if (start_chunk >= end_chunk)
 			continue;
-		add_active_range(0, start_chunk, end_chunk);
+		memblock_add_node(PFN_PHYS(start_chunk),
+				  PFN_PHYS(end_chunk - start_chunk), 0);
 		pfn = max(start_chunk, start_pfn);
 		for (; pfn < end_chunk; pfn++)
 			page_set_storage_key(PFN_PHYS(pfn),
diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c
index 05a85bc..7f6f9f3 100644
--- a/arch/s390/kernel/signal.c
+++ b/arch/s390/kernel/signal.c
@@ -460,9 +460,9 @@ void do_signal(struct pt_regs *regs)
 						     regs->svc_code >> 16);
 				break;
 			}
-			/* No longer in a system call */
-			clear_thread_flag(TIF_SYSCALL);
 		}
+		/* No longer in a system call */
+		clear_thread_flag(TIF_SYSCALL);
 
 		if ((is_compat_task() ?
 		     handle_signal32(signr, &ka, &info, oldset, regs) :
@@ -486,6 +486,7 @@ void do_signal(struct pt_regs *regs)
 	}
 
 	/* No handlers present - check for system call restart */
+	clear_thread_flag(TIF_SYSCALL);
 	if (current_thread_info()->system_call) {
 		regs->svc_code = current_thread_info()->system_call;
 		switch (regs->gprs[2]) {
@@ -500,9 +501,6 @@ void do_signal(struct pt_regs *regs)
 			regs->gprs[2] = regs->orig_gpr2;
 			set_thread_flag(TIF_SYSCALL);
 			break;
-		default:
-			clear_thread_flag(TIF_SYSCALL);
-			break;
 		}
 	}
 
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 3ea8728..66cca03 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -831,8 +831,8 @@ int setup_profiling_timer(unsigned int multiplier)
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
-static ssize_t cpu_configure_show(struct sys_device *dev,
-				struct sysdev_attribute *attr, char *buf)
+static ssize_t cpu_configure_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
 {
 	ssize_t count;
 
@@ -842,8 +842,8 @@ static ssize_t cpu_configure_show(struct sys_device *dev,
 	return count;
 }
 
-static ssize_t cpu_configure_store(struct sys_device *dev,
-				  struct sysdev_attribute *attr,
+static ssize_t cpu_configure_store(struct device *dev,
+				  struct device_attribute *attr,
 				  const char *buf, size_t count)
 {
 	int cpu = dev->id;
@@ -889,11 +889,11 @@ out:
 	put_online_cpus();
 	return rc ? rc : count;
 }
-static SYSDEV_ATTR(configure, 0644, cpu_configure_show, cpu_configure_store);
+static DEVICE_ATTR(configure, 0644, cpu_configure_show, cpu_configure_store);
 #endif /* CONFIG_HOTPLUG_CPU */
 
-static ssize_t cpu_polarization_show(struct sys_device *dev,
-				     struct sysdev_attribute *attr, char *buf)
+static ssize_t cpu_polarization_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
 {
 	int cpu = dev->id;
 	ssize_t count;
@@ -919,22 +919,22 @@ static ssize_t cpu_polarization_show(struct sys_device *dev,
 	mutex_unlock(&smp_cpu_state_mutex);
 	return count;
 }
-static SYSDEV_ATTR(polarization, 0444, cpu_polarization_show, NULL);
+static DEVICE_ATTR(polarization, 0444, cpu_polarization_show, NULL);
 
-static ssize_t show_cpu_address(struct sys_device *dev,
-				struct sysdev_attribute *attr, char *buf)
+static ssize_t show_cpu_address(struct device *dev,
+				struct device_attribute *attr, char *buf)
 {
 	return sprintf(buf, "%d\n", __cpu_logical_map[dev->id]);
 }
-static SYSDEV_ATTR(address, 0444, show_cpu_address, NULL);
+static DEVICE_ATTR(address, 0444, show_cpu_address, NULL);
 
 
 static struct attribute *cpu_common_attrs[] = {
 #ifdef CONFIG_HOTPLUG_CPU
-	&attr_configure.attr,
+	&dev_attr_configure.attr,
 #endif
-	&attr_address.attr,
-	&attr_polarization.attr,
+	&dev_attr_address.attr,
+	&dev_attr_polarization.attr,
 	NULL,
 };
 
@@ -942,8 +942,8 @@ static struct attribute_group cpu_common_attr_group = {
 	.attrs = cpu_common_attrs,
 };
 
-static ssize_t show_capability(struct sys_device *dev,
-				struct sysdev_attribute *attr, char *buf)
+static ssize_t show_capability(struct device *dev,
+				struct device_attribute *attr, char *buf)
 {
 	unsigned int capability;
 	int rc;
@@ -953,10 +953,10 @@ static ssize_t show_capability(struct sys_device *dev,
 		return rc;
 	return sprintf(buf, "%u\n", capability);
 }
-static SYSDEV_ATTR(capability, 0444, show_capability, NULL);
+static DEVICE_ATTR(capability, 0444, show_capability, NULL);
 
-static ssize_t show_idle_count(struct sys_device *dev,
-				struct sysdev_attribute *attr, char *buf)
+static ssize_t show_idle_count(struct device *dev,
+				struct device_attribute *attr, char *buf)
 {
 	struct s390_idle_data *idle;
 	unsigned long long idle_count;
@@ -976,10 +976,10 @@ repeat:
 		goto repeat;
 	return sprintf(buf, "%llu\n", idle_count);
 }
-static SYSDEV_ATTR(idle_count, 0444, show_idle_count, NULL);
+static DEVICE_ATTR(idle_count, 0444, show_idle_count, NULL);
 
-static ssize_t show_idle_time(struct sys_device *dev,
-				struct sysdev_attribute *attr, char *buf)
+static ssize_t show_idle_time(struct device *dev,
+				struct device_attribute *attr, char *buf)
 {
 	struct s390_idle_data *idle;
 	unsigned long long now, idle_time, idle_enter;
@@ -1001,12 +1001,12 @@ repeat:
 		goto repeat;
 	return sprintf(buf, "%llu\n", idle_time >> 12);
 }
-static SYSDEV_ATTR(idle_time_us, 0444, show_idle_time, NULL);
+static DEVICE_ATTR(idle_time_us, 0444, show_idle_time, NULL);
 
 static struct attribute *cpu_online_attrs[] = {
-	&attr_capability.attr,
-	&attr_idle_count.attr,
-	&attr_idle_time_us.attr,
+	&dev_attr_capability.attr,
+	&dev_attr_idle_count.attr,
+	&dev_attr_idle_time_us.attr,
 	NULL,
 };
 
@@ -1019,7 +1019,7 @@ static int __cpuinit smp_cpu_notify(struct notifier_block *self,
 {
 	unsigned int cpu = (unsigned int)(long)hcpu;
 	struct cpu *c = &per_cpu(cpu_devices, cpu);
-	struct sys_device *s = &c->sysdev;
+	struct device *s = &c->dev;
 	struct s390_idle_data *idle;
 	int err = 0;
 
@@ -1045,7 +1045,7 @@ static struct notifier_block __cpuinitdata smp_cpu_nb = {
 static int __devinit smp_add_present_cpu(int cpu)
 {
 	struct cpu *c = &per_cpu(cpu_devices, cpu);
-	struct sys_device *s = &c->sysdev;
+	struct device *s = &c->dev;
 	int rc;
 
 	c->hotpluggable = 1;
@@ -1098,8 +1098,8 @@ out:
 	return rc;
 }
 
-static ssize_t __ref rescan_store(struct sysdev_class *class,
-				  struct sysdev_class_attribute *attr,
+static ssize_t __ref rescan_store(struct device *dev,
+				  struct device_attribute *attr,
 				  const char *buf,
 				  size_t count)
 {
@@ -1108,11 +1108,11 @@ static ssize_t __ref rescan_store(struct sysdev_class *class,
 	rc = smp_rescan_cpus();
 	return rc ? rc : count;
 }
-static SYSDEV_CLASS_ATTR(rescan, 0200, NULL, rescan_store);
+static DEVICE_ATTR(rescan, 0200, NULL, rescan_store);
 #endif /* CONFIG_HOTPLUG_CPU */
 
-static ssize_t dispatching_show(struct sysdev_class *class,
-				struct sysdev_class_attribute *attr,
+static ssize_t dispatching_show(struct device *dev,
+				struct device_attribute *attr,
 				char *buf)
 {
 	ssize_t count;
@@ -1123,8 +1123,8 @@ static ssize_t dispatching_show(struct sysdev_class *class,
 	return count;
 }
 
-static ssize_t dispatching_store(struct sysdev_class *dev,
-				 struct sysdev_class_attribute *attr,
+static ssize_t dispatching_store(struct device *dev,
+				 struct device_attribute *attr,
 				 const char *buf,
 				 size_t count)
 {
@@ -1148,7 +1148,7 @@ out:
 	put_online_cpus();
 	return rc ? rc : count;
 }
-static SYSDEV_CLASS_ATTR(dispatching, 0644, dispatching_show,
+static DEVICE_ATTR(dispatching, 0644, dispatching_show,
 			 dispatching_store);
 
 static int __init topology_init(void)
@@ -1159,11 +1159,11 @@ static int __init topology_init(void)
 	register_cpu_notifier(&smp_cpu_nb);
 
 #ifdef CONFIG_HOTPLUG_CPU
-	rc = sysdev_class_create_file(&cpu_sysdev_class, &attr_rescan);
+	rc = device_create_file(cpu_subsys.dev_root, &dev_attr_rescan);
 	if (rc)
 		return rc;
 #endif
-	rc = sysdev_class_create_file(&cpu_sysdev_class, &attr_dispatching);
+	rc = device_create_file(cpu_subsys.dev_root, &dev_attr_dispatching);
 	if (rc)
 		return rc;
 	for_each_present_cpu(cpu) {
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index ebbfab3..fa02f44 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -27,7 +27,7 @@
 #include <linux/cpu.h>
 #include <linux/stop_machine.h>
 #include <linux/time.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/smp.h>
@@ -1116,34 +1116,35 @@ out_unlock:
 /*
  * Sysfs interface functions
  */
-static struct sysdev_class etr_sysclass = {
-	.name	= "etr",
+static struct bus_type etr_subsys = {
+	.name		= "etr",
+	.dev_name	= "etr",
 };
 
-static struct sys_device etr_port0_dev = {
+static struct device etr_port0_dev = {
 	.id	= 0,
-	.cls	= &etr_sysclass,
+	.bus	= &etr_subsys,
 };
 
-static struct sys_device etr_port1_dev = {
+static struct device etr_port1_dev = {
 	.id	= 1,
-	.cls	= &etr_sysclass,
+	.bus	= &etr_subsys,
 };
 
 /*
- * ETR class attributes
+ * ETR subsys attributes
  */
-static ssize_t etr_stepping_port_show(struct sysdev_class *class,
-					struct sysdev_class_attribute *attr,
+static ssize_t etr_stepping_port_show(struct device *dev,
+					struct device_attribute *attr,
 					char *buf)
 {
 	return sprintf(buf, "%i\n", etr_port0.esw.p);
 }
 
-static SYSDEV_CLASS_ATTR(stepping_port, 0400, etr_stepping_port_show, NULL);
+static DEVICE_ATTR(stepping_port, 0400, etr_stepping_port_show, NULL);
 
-static ssize_t etr_stepping_mode_show(struct sysdev_class *class,
-				      	struct sysdev_class_attribute *attr,
+static ssize_t etr_stepping_mode_show(struct device *dev,
+					struct device_attribute *attr,
 					char *buf)
 {
 	char *mode_str;
@@ -1157,12 +1158,12 @@ static ssize_t etr_stepping_mode_show(struct sysdev_class *class,
 	return sprintf(buf, "%s\n", mode_str);
 }
 
-static SYSDEV_CLASS_ATTR(stepping_mode, 0400, etr_stepping_mode_show, NULL);
+static DEVICE_ATTR(stepping_mode, 0400, etr_stepping_mode_show, NULL);
 
 /*
  * ETR port attributes
  */
-static inline struct etr_aib *etr_aib_from_dev(struct sys_device *dev)
+static inline struct etr_aib *etr_aib_from_dev(struct device *dev)
 {
 	if (dev == &etr_port0_dev)
 		return etr_port0_online ? &etr_port0 : NULL;
@@ -1170,8 +1171,8 @@ static inline struct etr_aib *etr_aib_from_dev(struct sys_device *dev)
 		return etr_port1_online ? &etr_port1 : NULL;
 }
 
-static ssize_t etr_online_show(struct sys_device *dev,
-				struct sysdev_attribute *attr,
+static ssize_t etr_online_show(struct device *dev,
+				struct device_attribute *attr,
 				char *buf)
 {
 	unsigned int online;
@@ -1180,8 +1181,8 @@ static ssize_t etr_online_show(struct sys_device *dev,
 	return sprintf(buf, "%i\n", online);
 }
 
-static ssize_t etr_online_store(struct sys_device *dev,
-				struct sysdev_attribute *attr,
+static ssize_t etr_online_store(struct device *dev,
+				struct device_attribute *attr,
 				const char *buf, size_t count)
 {
 	unsigned int value;
@@ -1218,20 +1219,20 @@ out:
 	return count;
 }
 
-static SYSDEV_ATTR(online, 0600, etr_online_show, etr_online_store);
+static DEVICE_ATTR(online, 0600, etr_online_show, etr_online_store);
 
-static ssize_t etr_stepping_control_show(struct sys_device *dev,
-					struct sysdev_attribute *attr,
+static ssize_t etr_stepping_control_show(struct device *dev,
+					struct device_attribute *attr,
 					char *buf)
 {
 	return sprintf(buf, "%i\n", (dev == &etr_port0_dev) ?
 		       etr_eacr.e0 : etr_eacr.e1);
 }
 
-static SYSDEV_ATTR(stepping_control, 0400, etr_stepping_control_show, NULL);
+static DEVICE_ATTR(stepping_control, 0400, etr_stepping_control_show, NULL);
 
-static ssize_t etr_mode_code_show(struct sys_device *dev,
-				struct sysdev_attribute *attr, char *buf)
+static ssize_t etr_mode_code_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
 {
 	if (!etr_port0_online && !etr_port1_online)
 		/* Status word is not uptodate if both ports are offline. */
@@ -1240,10 +1241,10 @@ static ssize_t etr_mode_code_show(struct sys_device *dev,
 		       etr_port0.esw.psc0 : etr_port0.esw.psc1);
 }
 
-static SYSDEV_ATTR(state_code, 0400, etr_mode_code_show, NULL);
+static DEVICE_ATTR(state_code, 0400, etr_mode_code_show, NULL);
 
-static ssize_t etr_untuned_show(struct sys_device *dev,
-				struct sysdev_attribute *attr, char *buf)
+static ssize_t etr_untuned_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
 {
 	struct etr_aib *aib = etr_aib_from_dev(dev);
 
@@ -1252,10 +1253,10 @@ static ssize_t etr_untuned_show(struct sys_device *dev,
 	return sprintf(buf, "%i\n", aib->edf1.u);
 }
 
-static SYSDEV_ATTR(untuned, 0400, etr_untuned_show, NULL);
+static DEVICE_ATTR(untuned, 0400, etr_untuned_show, NULL);
 
-static ssize_t etr_network_id_show(struct sys_device *dev,
-				struct sysdev_attribute *attr, char *buf)
+static ssize_t etr_network_id_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
 {
 	struct etr_aib *aib = etr_aib_from_dev(dev);
 
@@ -1264,10 +1265,10 @@ static ssize_t etr_network_id_show(struct sys_device *dev,
 	return sprintf(buf, "%i\n", aib->edf1.net_id);
 }
 
-static SYSDEV_ATTR(network, 0400, etr_network_id_show, NULL);
+static DEVICE_ATTR(network, 0400, etr_network_id_show, NULL);
 
-static ssize_t etr_id_show(struct sys_device *dev,
-			struct sysdev_attribute *attr, char *buf)
+static ssize_t etr_id_show(struct device *dev,
+			struct device_attribute *attr, char *buf)
 {
 	struct etr_aib *aib = etr_aib_from_dev(dev);
 
@@ -1276,10 +1277,10 @@ static ssize_t etr_id_show(struct sys_device *dev,
 	return sprintf(buf, "%i\n", aib->edf1.etr_id);
 }
 
-static SYSDEV_ATTR(id, 0400, etr_id_show, NULL);
+static DEVICE_ATTR(id, 0400, etr_id_show, NULL);
 
-static ssize_t etr_port_number_show(struct sys_device *dev,
-			struct sysdev_attribute *attr, char *buf)
+static ssize_t etr_port_number_show(struct device *dev,
+			struct device_attribute *attr, char *buf)
 {
 	struct etr_aib *aib = etr_aib_from_dev(dev);
 
@@ -1288,10 +1289,10 @@ static ssize_t etr_port_number_show(struct sys_device *dev,
 	return sprintf(buf, "%i\n", aib->edf1.etr_pn);
 }
 
-static SYSDEV_ATTR(port, 0400, etr_port_number_show, NULL);
+static DEVICE_ATTR(port, 0400, etr_port_number_show, NULL);
 
-static ssize_t etr_coupled_show(struct sys_device *dev,
-			struct sysdev_attribute *attr, char *buf)
+static ssize_t etr_coupled_show(struct device *dev,
+			struct device_attribute *attr, char *buf)
 {
 	struct etr_aib *aib = etr_aib_from_dev(dev);
 
@@ -1300,10 +1301,10 @@ static ssize_t etr_coupled_show(struct sys_device *dev,
 	return sprintf(buf, "%i\n", aib->edf3.c);
 }
 
-static SYSDEV_ATTR(coupled, 0400, etr_coupled_show, NULL);
+static DEVICE_ATTR(coupled, 0400, etr_coupled_show, NULL);
 
-static ssize_t etr_local_time_show(struct sys_device *dev,
-			struct sysdev_attribute *attr, char *buf)
+static ssize_t etr_local_time_show(struct device *dev,
+			struct device_attribute *attr, char *buf)
 {
 	struct etr_aib *aib = etr_aib_from_dev(dev);
 
@@ -1312,10 +1313,10 @@ static ssize_t etr_local_time_show(struct sys_device *dev,
 	return sprintf(buf, "%i\n", aib->edf3.blto);
 }
 
-static SYSDEV_ATTR(local_time, 0400, etr_local_time_show, NULL);
+static DEVICE_ATTR(local_time, 0400, etr_local_time_show, NULL);
 
-static ssize_t etr_utc_offset_show(struct sys_device *dev,
-			struct sysdev_attribute *attr, char *buf)
+static ssize_t etr_utc_offset_show(struct device *dev,
+			struct device_attribute *attr, char *buf)
 {
 	struct etr_aib *aib = etr_aib_from_dev(dev);
 
@@ -1324,64 +1325,64 @@ static ssize_t etr_utc_offset_show(struct sys_device *dev,
 	return sprintf(buf, "%i\n", aib->edf3.buo);
 }
 
-static SYSDEV_ATTR(utc_offset, 0400, etr_utc_offset_show, NULL);
+static DEVICE_ATTR(utc_offset, 0400, etr_utc_offset_show, NULL);
 
-static struct sysdev_attribute *etr_port_attributes[] = {
-	&attr_online,
-	&attr_stepping_control,
-	&attr_state_code,
-	&attr_untuned,
-	&attr_network,
-	&attr_id,
-	&attr_port,
-	&attr_coupled,
-	&attr_local_time,
-	&attr_utc_offset,
+static struct device_attribute *etr_port_attributes[] = {
+	&dev_attr_online,
+	&dev_attr_stepping_control,
+	&dev_attr_state_code,
+	&dev_attr_untuned,
+	&dev_attr_network,
+	&dev_attr_id,
+	&dev_attr_port,
+	&dev_attr_coupled,
+	&dev_attr_local_time,
+	&dev_attr_utc_offset,
 	NULL
 };
 
-static int __init etr_register_port(struct sys_device *dev)
+static int __init etr_register_port(struct device *dev)
 {
-	struct sysdev_attribute **attr;
+	struct device_attribute **attr;
 	int rc;
 
-	rc = sysdev_register(dev);
+	rc = device_register(dev);
 	if (rc)
 		goto out;
 	for (attr = etr_port_attributes; *attr; attr++) {
-		rc = sysdev_create_file(dev, *attr);
+		rc = device_create_file(dev, *attr);
 		if (rc)
 			goto out_unreg;
 	}
 	return 0;
 out_unreg:
 	for (; attr >= etr_port_attributes; attr--)
-		sysdev_remove_file(dev, *attr);
-	sysdev_unregister(dev);
+		device_remove_file(dev, *attr);
+	device_unregister(dev);
 out:
 	return rc;
 }
 
-static void __init etr_unregister_port(struct sys_device *dev)
+static void __init etr_unregister_port(struct device *dev)
 {
-	struct sysdev_attribute **attr;
+	struct device_attribute **attr;
 
 	for (attr = etr_port_attributes; *attr; attr++)
-		sysdev_remove_file(dev, *attr);
-	sysdev_unregister(dev);
+		device_remove_file(dev, *attr);
+	device_unregister(dev);
 }
 
 static int __init etr_init_sysfs(void)
 {
 	int rc;
 
-	rc = sysdev_class_register(&etr_sysclass);
+	rc = subsys_system_register(&etr_subsys, NULL);
 	if (rc)
 		goto out;
-	rc = sysdev_class_create_file(&etr_sysclass, &attr_stepping_port);
+	rc = device_create_file(etr_subsys.dev_root, &dev_attr_stepping_port);
 	if (rc)
-		goto out_unreg_class;
-	rc = sysdev_class_create_file(&etr_sysclass, &attr_stepping_mode);
+		goto out_unreg_subsys;
+	rc = device_create_file(etr_subsys.dev_root, &dev_attr_stepping_mode);
 	if (rc)
 		goto out_remove_stepping_port;
 	rc = etr_register_port(&etr_port0_dev);
@@ -1395,11 +1396,11 @@ static int __init etr_init_sysfs(void)
 out_remove_port0:
 	etr_unregister_port(&etr_port0_dev);
 out_remove_stepping_mode:
-	sysdev_class_remove_file(&etr_sysclass, &attr_stepping_mode);
+	device_remove_file(etr_subsys.dev_root, &dev_attr_stepping_mode);
 out_remove_stepping_port:
-	sysdev_class_remove_file(&etr_sysclass, &attr_stepping_port);
-out_unreg_class:
-	sysdev_class_unregister(&etr_sysclass);
+	device_remove_file(etr_subsys.dev_root, &dev_attr_stepping_port);
+out_unreg_subsys:
+	bus_unregister(&etr_subsys);
 out:
 	return rc;
 }
@@ -1599,14 +1600,15 @@ out_unlock:
 }
 
 /*
- * STP class sysfs interface functions
+ * STP subsys sysfs interface functions
  */
-static struct sysdev_class stp_sysclass = {
-	.name	= "stp",
+static struct bus_type stp_subsys = {
+	.name		= "stp",
+	.dev_name	= "stp",
 };
 
-static ssize_t stp_ctn_id_show(struct sysdev_class *class,
-				struct sysdev_class_attribute *attr,
+static ssize_t stp_ctn_id_show(struct device *dev,
+				struct device_attribute *attr,
 				char *buf)
 {
 	if (!stp_online)
@@ -1615,10 +1617,10 @@ static ssize_t stp_ctn_id_show(struct sysdev_class *class,
 		       *(unsigned long long *) stp_info.ctnid);
 }
 
-static SYSDEV_CLASS_ATTR(ctn_id, 0400, stp_ctn_id_show, NULL);
+static DEVICE_ATTR(ctn_id, 0400, stp_ctn_id_show, NULL);
 
-static ssize_t stp_ctn_type_show(struct sysdev_class *class,
-				struct sysdev_class_attribute *attr,
+static ssize_t stp_ctn_type_show(struct device *dev,
+				struct device_attribute *attr,
 				char *buf)
 {
 	if (!stp_online)
@@ -1626,10 +1628,10 @@ static ssize_t stp_ctn_type_show(struct sysdev_class *class,
 	return sprintf(buf, "%i\n", stp_info.ctn);
 }
 
-static SYSDEV_CLASS_ATTR(ctn_type, 0400, stp_ctn_type_show, NULL);
+static DEVICE_ATTR(ctn_type, 0400, stp_ctn_type_show, NULL);
 
-static ssize_t stp_dst_offset_show(struct sysdev_class *class,
-				   struct sysdev_class_attribute *attr,
+static ssize_t stp_dst_offset_show(struct device *dev,
+				   struct device_attribute *attr,
 				   char *buf)
 {
 	if (!stp_online || !(stp_info.vbits & 0x2000))
@@ -1637,10 +1639,10 @@ static ssize_t stp_dst_offset_show(struct sysdev_class *class,
 	return sprintf(buf, "%i\n", (int)(s16) stp_info.dsto);
 }
 
-static SYSDEV_CLASS_ATTR(dst_offset, 0400, stp_dst_offset_show, NULL);
+static DEVICE_ATTR(dst_offset, 0400, stp_dst_offset_show, NULL);
 
-static ssize_t stp_leap_seconds_show(struct sysdev_class *class,
-					struct sysdev_class_attribute *attr,
+static ssize_t stp_leap_seconds_show(struct device *dev,
+					struct device_attribute *attr,
 					char *buf)
 {
 	if (!stp_online || !(stp_info.vbits & 0x8000))
@@ -1648,10 +1650,10 @@ static ssize_t stp_leap_seconds_show(struct sysdev_class *class,
 	return sprintf(buf, "%i\n", (int)(s16) stp_info.leaps);
 }
 
-static SYSDEV_CLASS_ATTR(leap_seconds, 0400, stp_leap_seconds_show, NULL);
+static DEVICE_ATTR(leap_seconds, 0400, stp_leap_seconds_show, NULL);
 
-static ssize_t stp_stratum_show(struct sysdev_class *class,
-				struct sysdev_class_attribute *attr,
+static ssize_t stp_stratum_show(struct device *dev,
+				struct device_attribute *attr,
 				char *buf)
 {
 	if (!stp_online)
@@ -1659,10 +1661,10 @@ static ssize_t stp_stratum_show(struct sysdev_class *class,
 	return sprintf(buf, "%i\n", (int)(s16) stp_info.stratum);
 }
 
-static SYSDEV_CLASS_ATTR(stratum, 0400, stp_stratum_show, NULL);
+static DEVICE_ATTR(stratum, 0400, stp_stratum_show, NULL);
 
-static ssize_t stp_time_offset_show(struct sysdev_class *class,
-				struct sysdev_class_attribute *attr,
+static ssize_t stp_time_offset_show(struct device *dev,
+				struct device_attribute *attr,
 				char *buf)
 {
 	if (!stp_online || !(stp_info.vbits & 0x0800))
@@ -1670,10 +1672,10 @@ static ssize_t stp_time_offset_show(struct sysdev_class *class,
 	return sprintf(buf, "%i\n", (int) stp_info.tto);
 }
 
-static SYSDEV_CLASS_ATTR(time_offset, 0400, stp_time_offset_show, NULL);
+static DEVICE_ATTR(time_offset, 0400, stp_time_offset_show, NULL);
 
-static ssize_t stp_time_zone_offset_show(struct sysdev_class *class,
-				struct sysdev_class_attribute *attr,
+static ssize_t stp_time_zone_offset_show(struct device *dev,
+				struct device_attribute *attr,
 				char *buf)
 {
 	if (!stp_online || !(stp_info.vbits & 0x4000))
@@ -1681,11 +1683,11 @@ static ssize_t stp_time_zone_offset_show(struct sysdev_class *class,
 	return sprintf(buf, "%i\n", (int)(s16) stp_info.tzo);
 }
 
-static SYSDEV_CLASS_ATTR(time_zone_offset, 0400,
+static DEVICE_ATTR(time_zone_offset, 0400,
 			 stp_time_zone_offset_show, NULL);
 
-static ssize_t stp_timing_mode_show(struct sysdev_class *class,
-				struct sysdev_class_attribute *attr,
+static ssize_t stp_timing_mode_show(struct device *dev,
+				struct device_attribute *attr,
 				char *buf)
 {
 	if (!stp_online)
@@ -1693,10 +1695,10 @@ static ssize_t stp_timing_mode_show(struct sysdev_class *class,
 	return sprintf(buf, "%i\n", stp_info.tmd);
 }
 
-static SYSDEV_CLASS_ATTR(timing_mode, 0400, stp_timing_mode_show, NULL);
+static DEVICE_ATTR(timing_mode, 0400, stp_timing_mode_show, NULL);
 
-static ssize_t stp_timing_state_show(struct sysdev_class *class,
-				struct sysdev_class_attribute *attr,
+static ssize_t stp_timing_state_show(struct device *dev,
+				struct device_attribute *attr,
 				char *buf)
 {
 	if (!stp_online)
@@ -1704,17 +1706,17 @@ static ssize_t stp_timing_state_show(struct sysdev_class *class,
 	return sprintf(buf, "%i\n", stp_info.tst);
 }
 
-static SYSDEV_CLASS_ATTR(timing_state, 0400, stp_timing_state_show, NULL);
+static DEVICE_ATTR(timing_state, 0400, stp_timing_state_show, NULL);
 
-static ssize_t stp_online_show(struct sysdev_class *class,
-				struct sysdev_class_attribute *attr,
+static ssize_t stp_online_show(struct device *dev,
+				struct device_attribute *attr,
 				char *buf)
 {
 	return sprintf(buf, "%i\n", stp_online);
 }
 
-static ssize_t stp_online_store(struct sysdev_class *class,
-				struct sysdev_class_attribute *attr,
+static ssize_t stp_online_store(struct device *dev,
+				struct device_attribute *attr,
 				const char *buf, size_t count)
 {
 	unsigned int value;
@@ -1736,47 +1738,47 @@ static ssize_t stp_online_store(struct sysdev_class *class,
 }
 
 /*
- * Can't use SYSDEV_CLASS_ATTR because the attribute should be named
- * stp/online but attr_online already exists in this file ..
+ * Can't use DEVICE_ATTR because the attribute should be named
+ * stp/online but dev_attr_online already exists in this file ..
  */
-static struct sysdev_class_attribute attr_stp_online = {
+static struct device_attribute dev_attr_stp_online = {
 	.attr = { .name = "online", .mode = 0600 },
 	.show	= stp_online_show,
 	.store	= stp_online_store,
 };
 
-static struct sysdev_class_attribute *stp_attributes[] = {
-	&attr_ctn_id,
-	&attr_ctn_type,
-	&attr_dst_offset,
-	&attr_leap_seconds,
-	&attr_stp_online,
-	&attr_stratum,
-	&attr_time_offset,
-	&attr_time_zone_offset,
-	&attr_timing_mode,
-	&attr_timing_state,
+static struct device_attribute *stp_attributes[] = {
+	&dev_attr_ctn_id,
+	&dev_attr_ctn_type,
+	&dev_attr_dst_offset,
+	&dev_attr_leap_seconds,
+	&dev_attr_stp_online,
+	&dev_attr_stratum,
+	&dev_attr_time_offset,
+	&dev_attr_time_zone_offset,
+	&dev_attr_timing_mode,
+	&dev_attr_timing_state,
 	NULL
 };
 
 static int __init stp_init_sysfs(void)
 {
-	struct sysdev_class_attribute **attr;
+	struct device_attribute **attr;
 	int rc;
 
-	rc = sysdev_class_register(&stp_sysclass);
+	rc = subsys_system_register(&stp_subsys, NULL);
 	if (rc)
 		goto out;
 	for (attr = stp_attributes; *attr; attr++) {
-		rc = sysdev_class_create_file(&stp_sysclass, *attr);
+		rc = device_create_file(stp_subsys.dev_root, *attr);
 		if (rc)
 			goto out_unreg;
 	}
 	return 0;
 out_unreg:
 	for (; attr >= stp_attributes; attr--)
-		sysdev_class_remove_file(&stp_sysclass, *attr);
-	sysdev_class_unregister(&stp_sysclass);
+		device_remove_file(stp_subsys.dev_root, *attr);
+	bus_unregister(&stp_subsys);
 out:
 	return rc;
 }
diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c
index fdb5b8c..6e0e29b 100644
--- a/arch/s390/kernel/topology.c
+++ b/arch/s390/kernel/topology.c
@@ -261,7 +261,7 @@ void store_topology(struct sysinfo_15_1_x *info)
 int arch_update_cpu_topology(void)
 {
 	struct sysinfo_15_1_x *info = tl_info;
-	struct sys_device *sysdev;
+	struct device *dev;
 	int cpu;
 
 	if (!MACHINE_HAS_TOPOLOGY) {
@@ -273,8 +273,8 @@ int arch_update_cpu_topology(void)
 	tl_to_cores(info);
 	update_cpu_core_map();
 	for_each_online_cpu(cpu) {
-		sysdev = get_cpu_sysdev(cpu);
-		kobject_uevent(&sysdev->kobj, KOBJ_CHANGE);
+		dev = get_cpu_device(cpu);
+		kobject_uevent(&dev->kobj, KOBJ_CHANGE);
 	}
 	return 1;
 }
diff --git a/arch/s390/oprofile/hwsampler.c b/arch/s390/oprofile/hwsampler.c
index f43c0e4..9daee91 100644
--- a/arch/s390/oprofile/hwsampler.c
+++ b/arch/s390/oprofile/hwsampler.c
@@ -22,6 +22,7 @@
 #include <asm/irq.h>
 
 #include "hwsampler.h"
+#include "op_counter.h"
 
 #define MAX_NUM_SDB 511
 #define MIN_NUM_SDB 1
@@ -896,6 +897,8 @@ static void add_samples_to_oprofile(unsigned int cpu, unsigned long *sdbt,
 		if (sample_data_ptr->P == 1) {
 			/* userspace sample */
 			unsigned int pid = sample_data_ptr->prim_asn;
+			if (!counter_config.user)
+				goto skip_sample;
 			rcu_read_lock();
 			tsk = pid_task(find_vpid(pid), PIDTYPE_PID);
 			if (tsk)
@@ -903,6 +906,8 @@ static void add_samples_to_oprofile(unsigned int cpu, unsigned long *sdbt,
 			rcu_read_unlock();
 		} else {
 			/* kernelspace sample */
+			if (!counter_config.kernel)
+				goto skip_sample;
 			regs = task_pt_regs(current);
 		}
 
@@ -910,7 +915,7 @@ static void add_samples_to_oprofile(unsigned int cpu, unsigned long *sdbt,
 		oprofile_add_ext_hw_sample(sample_data_ptr->ia, regs, 0,
 				!sample_data_ptr->P, tsk);
 		mutex_unlock(&hws_sem);
-
+	skip_sample:
 		sample_data_ptr++;
 	}
 }
diff --git a/arch/s390/oprofile/init.c b/arch/s390/oprofile/init.c
index 6efc18b..2297be4 100644
--- a/arch/s390/oprofile/init.c
+++ b/arch/s390/oprofile/init.c
@@ -2,10 +2,11 @@
  * arch/s390/oprofile/init.c
  *
  * S390 Version
- *   Copyright (C) 2003 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *   Copyright (C) 2002-2011 IBM Deutschland Entwicklung GmbH, IBM Corporation
  *   Author(s): Thomas Spatzier (tspat@de.ibm.com)
  *   Author(s): Mahesh Salgaonkar (mahesh@linux.vnet.ibm.com)
  *   Author(s): Heinz Graalfs (graalfs@linux.vnet.ibm.com)
+ *   Author(s): Andreas Krebbel (krebbel@linux.vnet.ibm.com)
  *
  * @remark Copyright 2002-2011 OProfile authors
  */
@@ -14,6 +15,8 @@
 #include <linux/init.h>
 #include <linux/errno.h>
 #include <linux/fs.h>
+#include <linux/module.h>
+#include <asm/processor.h>
 
 #include "../../../drivers/oprofile/oprof.h"
 
@@ -22,6 +25,7 @@ extern void s390_backtrace(struct pt_regs * const regs, unsigned int depth);
 #ifdef CONFIG_64BIT
 
 #include "hwsampler.h"
+#include "op_counter.h"
 
 #define DEFAULT_INTERVAL	4127518
 
@@ -35,16 +39,41 @@ static unsigned long oprofile_max_interval;
 static unsigned long oprofile_sdbt_blocks = DEFAULT_SDBT_BLOCKS;
 static unsigned long oprofile_sdb_blocks = DEFAULT_SDB_BLOCKS;
 
-static int hwsampler_file;
+static int hwsampler_enabled;
 static int hwsampler_running;	/* start_mutex must be held to change */
+static int hwsampler_available;
 
 static struct oprofile_operations timer_ops;
 
+struct op_counter_config counter_config;
+
+enum __force_cpu_type {
+	reserved = 0,		/* do not force */
+	timer,
+};
+static int force_cpu_type;
+
+static int set_cpu_type(const char *str, struct kernel_param *kp)
+{
+	if (!strcmp(str, "timer")) {
+		force_cpu_type = timer;
+		printk(KERN_INFO "oprofile: forcing timer to be returned "
+		                 "as cpu type\n");
+	} else {
+		force_cpu_type = 0;
+	}
+
+	return 0;
+}
+module_param_call(cpu_type, set_cpu_type, NULL, NULL, 0);
+MODULE_PARM_DESC(cpu_type, "Force legacy basic mode sampling"
+		           "(report cpu_type \"timer\"");
+
 static int oprofile_hwsampler_start(void)
 {
 	int retval;
 
-	hwsampler_running = hwsampler_file;
+	hwsampler_running = hwsampler_enabled;
 
 	if (!hwsampler_running)
 		return timer_ops.start();
@@ -72,10 +101,16 @@ static void oprofile_hwsampler_stop(void)
 	return;
 }
 
+/*
+ * File ops used for:
+ * /dev/oprofile/0/enabled
+ * /dev/oprofile/hwsampling/hwsampler  (cpu_type = timer)
+ */
+
 static ssize_t hwsampler_read(struct file *file, char __user *buf,
 		size_t count, loff_t *offset)
 {
-	return oprofilefs_ulong_to_user(hwsampler_file, buf, count, offset);
+	return oprofilefs_ulong_to_user(hwsampler_enabled, buf, count, offset);
 }
 
 static ssize_t hwsampler_write(struct file *file, char const __user *buf,
@@ -88,9 +123,12 @@ static ssize_t hwsampler_write(struct file *file, char const __user *buf,
 		return -EINVAL;
 
 	retval = oprofilefs_ulong_from_user(&val, buf, count);
-	if (retval)
+	if (retval <= 0)
 		return retval;
 
+	if (val != 0 && val != 1)
+		return -EINVAL;
+
 	if (oprofile_started)
 		/*
 		 * save to do without locking as we set
@@ -99,7 +137,7 @@ static ssize_t hwsampler_write(struct file *file, char const __user *buf,
 		 */
 		return -EBUSY;
 
-	hwsampler_file = val;
+	hwsampler_enabled = val;
 
 	return count;
 }
@@ -109,38 +147,311 @@ static const struct file_operations hwsampler_fops = {
 	.write		= hwsampler_write,
 };
 
+/*
+ * File ops used for:
+ * /dev/oprofile/0/count
+ * /dev/oprofile/hwsampling/hw_interval  (cpu_type = timer)
+ *
+ * Make sure that the value is within the hardware range.
+ */
+
+static ssize_t hw_interval_read(struct file *file, char __user *buf,
+				size_t count, loff_t *offset)
+{
+	return oprofilefs_ulong_to_user(oprofile_hw_interval, buf,
+					count, offset);
+}
+
+static ssize_t hw_interval_write(struct file *file, char const __user *buf,
+				 size_t count, loff_t *offset)
+{
+	unsigned long val;
+	int retval;
+
+	if (*offset)
+		return -EINVAL;
+	retval = oprofilefs_ulong_from_user(&val, buf, count);
+	if (retval)
+		return retval;
+	if (val < oprofile_min_interval)
+		oprofile_hw_interval = oprofile_min_interval;
+	else if (val > oprofile_max_interval)
+		oprofile_hw_interval = oprofile_max_interval;
+	else
+		oprofile_hw_interval = val;
+
+	return count;
+}
+
+static const struct file_operations hw_interval_fops = {
+	.read		= hw_interval_read,
+	.write		= hw_interval_write,
+};
+
+/*
+ * File ops used for:
+ * /dev/oprofile/0/event
+ * Only a single event with number 0 is supported with this counter.
+ *
+ * /dev/oprofile/0/unit_mask
+ * This is a dummy file needed by the user space tools.
+ * No value other than 0 is accepted or returned.
+ */
+
+static ssize_t hwsampler_zero_read(struct file *file, char __user *buf,
+				    size_t count, loff_t *offset)
+{
+	return oprofilefs_ulong_to_user(0, buf, count, offset);
+}
+
+static ssize_t hwsampler_zero_write(struct file *file, char const __user *buf,
+				     size_t count, loff_t *offset)
+{
+	unsigned long val;
+	int retval;
+
+	if (*offset)
+		return -EINVAL;
+
+	retval = oprofilefs_ulong_from_user(&val, buf, count);
+	if (retval)
+		return retval;
+	if (val != 0)
+		return -EINVAL;
+	return count;
+}
+
+static const struct file_operations zero_fops = {
+	.read		= hwsampler_zero_read,
+	.write		= hwsampler_zero_write,
+};
+
+/* /dev/oprofile/0/kernel file ops.  */
+
+static ssize_t hwsampler_kernel_read(struct file *file, char __user *buf,
+				     size_t count, loff_t *offset)
+{
+	return oprofilefs_ulong_to_user(counter_config.kernel,
+					buf, count, offset);
+}
+
+static ssize_t hwsampler_kernel_write(struct file *file, char const __user *buf,
+				      size_t count, loff_t *offset)
+{
+	unsigned long val;
+	int retval;
+
+	if (*offset)
+		return -EINVAL;
+
+	retval = oprofilefs_ulong_from_user(&val, buf, count);
+	if (retval)
+		return retval;
+
+	if (val != 0 && val != 1)
+		return -EINVAL;
+
+	counter_config.kernel = val;
+
+	return count;
+}
+
+static const struct file_operations kernel_fops = {
+	.read		= hwsampler_kernel_read,
+	.write		= hwsampler_kernel_write,
+};
+
+/* /dev/oprofile/0/user file ops. */
+
+static ssize_t hwsampler_user_read(struct file *file, char __user *buf,
+				   size_t count, loff_t *offset)
+{
+	return oprofilefs_ulong_to_user(counter_config.user,
+					buf, count, offset);
+}
+
+static ssize_t hwsampler_user_write(struct file *file, char const __user *buf,
+				    size_t count, loff_t *offset)
+{
+	unsigned long val;
+	int retval;
+
+	if (*offset)
+		return -EINVAL;
+
+	retval = oprofilefs_ulong_from_user(&val, buf, count);
+	if (retval)
+		return retval;
+
+	if (val != 0 && val != 1)
+		return -EINVAL;
+
+	counter_config.user = val;
+
+	return count;
+}
+
+static const struct file_operations user_fops = {
+	.read		= hwsampler_user_read,
+	.write		= hwsampler_user_write,
+};
+
+
+/*
+ * File ops used for: /dev/oprofile/timer/enabled
+ * The value always has to be the inverted value of hwsampler_enabled. So
+ * no separate variable is created. That way we do not need locking.
+ */
+
+static ssize_t timer_enabled_read(struct file *file, char __user *buf,
+				  size_t count, loff_t *offset)
+{
+	return oprofilefs_ulong_to_user(!hwsampler_enabled, buf, count, offset);
+}
+
+static ssize_t timer_enabled_write(struct file *file, char const __user *buf,
+				   size_t count, loff_t *offset)
+{
+	unsigned long val;
+	int retval;
+
+	if (*offset)
+		return -EINVAL;
+
+	retval = oprofilefs_ulong_from_user(&val, buf, count);
+	if (retval)
+		return retval;
+
+	if (val != 0 && val != 1)
+		return -EINVAL;
+
+	/* Timer cannot be disabled without having hardware sampling.  */
+	if (val == 0 && !hwsampler_available)
+		return -EINVAL;
+
+	if (oprofile_started)
+		/*
+		 * save to do without locking as we set
+		 * hwsampler_running in start() when start_mutex is
+		 * held
+		 */
+		return -EBUSY;
+
+	hwsampler_enabled = !val;
+
+	return count;
+}
+
+static const struct file_operations timer_enabled_fops = {
+	.read		= timer_enabled_read,
+	.write		= timer_enabled_write,
+};
+
+
 static int oprofile_create_hwsampling_files(struct super_block *sb,
-						struct dentry *root)
+					    struct dentry *root)
 {
-	struct dentry *hw_dir;
+	struct dentry *dir;
+
+	dir = oprofilefs_mkdir(sb, root, "timer");
+	if (!dir)
+		return -EINVAL;
+
+	oprofilefs_create_file(sb, dir, "enabled", &timer_enabled_fops);
+
+	if (!hwsampler_available)
+		return 0;
 
 	/* reinitialize default values */
-	hwsampler_file = 1;
+	hwsampler_enabled = 1;
+	counter_config.kernel = 1;
+	counter_config.user = 1;
 
-	hw_dir = oprofilefs_mkdir(sb, root, "hwsampling");
-	if (!hw_dir)
-		return -EINVAL;
+	if (!force_cpu_type) {
+		/*
+		 * Create the counter file system.  A single virtual
+		 * counter is created which can be used to
+		 * enable/disable hardware sampling dynamically from
+		 * user space.  The user space will configure a single
+		 * counter with a single event.  The value of 'event'
+		 * and 'unit_mask' are not evaluated by the kernel code
+		 * and can only be set to 0.
+		 */
+
+		dir = oprofilefs_mkdir(sb, root, "0");
+		if (!dir)
+			return -EINVAL;
 
-	oprofilefs_create_file(sb, hw_dir, "hwsampler", &hwsampler_fops);
-	oprofilefs_create_ulong(sb, hw_dir, "hw_interval",
-				&oprofile_hw_interval);
-	oprofilefs_create_ro_ulong(sb, hw_dir, "hw_min_interval",
-				&oprofile_min_interval);
-	oprofilefs_create_ro_ulong(sb, hw_dir, "hw_max_interval",
-				&oprofile_max_interval);
-	oprofilefs_create_ulong(sb, hw_dir, "hw_sdbt_blocks",
-				&oprofile_sdbt_blocks);
+		oprofilefs_create_file(sb, dir, "enabled", &hwsampler_fops);
+		oprofilefs_create_file(sb, dir, "event", &zero_fops);
+		oprofilefs_create_file(sb, dir, "count", &hw_interval_fops);
+		oprofilefs_create_file(sb, dir, "unit_mask", &zero_fops);
+		oprofilefs_create_file(sb, dir, "kernel", &kernel_fops);
+		oprofilefs_create_file(sb, dir, "user", &user_fops);
+		oprofilefs_create_ulong(sb, dir, "hw_sdbt_blocks",
+					&oprofile_sdbt_blocks);
 
+	} else {
+		/*
+		 * Hardware sampling can be used but the cpu_type is
+		 * forced to timer in order to deal with legacy user
+		 * space tools.  The /dev/oprofile/hwsampling fs is
+		 * provided in that case.
+		 */
+		dir = oprofilefs_mkdir(sb, root, "hwsampling");
+		if (!dir)
+			return -EINVAL;
+
+		oprofilefs_create_file(sb, dir, "hwsampler",
+				       &hwsampler_fops);
+		oprofilefs_create_file(sb, dir, "hw_interval",
+				       &hw_interval_fops);
+		oprofilefs_create_ro_ulong(sb, dir, "hw_min_interval",
+					   &oprofile_min_interval);
+		oprofilefs_create_ro_ulong(sb, dir, "hw_max_interval",
+					   &oprofile_max_interval);
+		oprofilefs_create_ulong(sb, dir, "hw_sdbt_blocks",
+					&oprofile_sdbt_blocks);
+	}
 	return 0;
 }
 
 static int oprofile_hwsampler_init(struct oprofile_operations *ops)
 {
+	/*
+	 * Initialize the timer mode infrastructure as well in order
+	 * to be able to switch back dynamically.  oprofile_timer_init
+	 * is not supposed to fail.
+	 */
+	if (oprofile_timer_init(ops))
+		BUG();
+
+	memcpy(&timer_ops, ops, sizeof(timer_ops));
+	ops->create_files = oprofile_create_hwsampling_files;
+
+	/*
+	 * If the user space tools do not support newer cpu types,
+	 * the force_cpu_type module parameter
+	 * can be used to always return \"timer\" as cpu type.
+	 */
+	if (force_cpu_type != timer) {
+		struct cpuid id;
+
+		get_cpu_id (&id);
+
+		switch (id.machine) {
+		case 0x2097: case 0x2098: ops->cpu_type = "s390/z10"; break;
+		case 0x2817: case 0x2818: ops->cpu_type = "s390/z196"; break;
+		default: return -ENODEV;
+		}
+	}
+
 	if (hwsampler_setup())
 		return -ENODEV;
 
 	/*
-	 * create hwsampler files only if hwsampler_setup() succeeds.
+	 * Query the range for the sampling interval from the
+	 * hardware.
 	 */
 	oprofile_min_interval = hwsampler_query_min_interval();
 	if (oprofile_min_interval == 0)
@@ -155,23 +466,17 @@ static int oprofile_hwsampler_init(struct oprofile_operations *ops)
 	if (oprofile_hw_interval > oprofile_max_interval)
 		oprofile_hw_interval = oprofile_max_interval;
 
-	if (oprofile_timer_init(ops))
-		return -ENODEV;
-
-	printk(KERN_INFO "oprofile: using hardware sampling\n");
-
-	memcpy(&timer_ops, ops, sizeof(timer_ops));
+	printk(KERN_INFO "oprofile: System z hardware sampling "
+	       "facility found.\n");
 
 	ops->start = oprofile_hwsampler_start;
 	ops->stop = oprofile_hwsampler_stop;
-	ops->create_files = oprofile_create_hwsampling_files;
 
 	return 0;
 }
 
 static void oprofile_hwsampler_exit(void)
 {
-	oprofile_timer_exit();
 	hwsampler_shutdown();
 }
 
@@ -182,7 +487,15 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
 	ops->backtrace = s390_backtrace;
 
 #ifdef CONFIG_64BIT
-	return oprofile_hwsampler_init(ops);
+
+	/*
+	 * -ENODEV is not reported to the caller.  The module itself
+         * will use the timer mode sampling as fallback and this is
+         * always available.
+	 */
+	hwsampler_available = oprofile_hwsampler_init(ops) == 0;
+
+	return 0;
 #else
 	return -ENODEV;
 #endif
diff --git a/arch/s390/oprofile/op_counter.h b/arch/s390/oprofile/op_counter.h
new file mode 100644
index 0000000..1a8d3ca
--- /dev/null
+++ b/arch/s390/oprofile/op_counter.h
@@ -0,0 +1,23 @@
+/**
+ * arch/s390/oprofile/op_counter.h
+ *
+ *   Copyright (C) 2011 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *   Author(s): Andreas Krebbel (krebbel@linux.vnet.ibm.com)
+ *
+ * @remark Copyright 2011 OProfile authors
+ */
+
+#ifndef OP_COUNTER_H
+#define OP_COUNTER_H
+
+struct op_counter_config {
+	/* `enabled' maps to the hwsampler_file variable.  */
+	/* `count' maps to the oprofile_hw_interval variable.  */
+	/* `event' and `unit_mask' are unused. */
+	unsigned long kernel;
+	unsigned long user;
+};
+
+extern struct op_counter_config counter_config;
+
+#endif /* OP_COUNTER_H */
diff --git a/arch/score/Kconfig b/arch/score/Kconfig
index df169e8..8b0c946 100644
--- a/arch/score/Kconfig
+++ b/arch/score/Kconfig
@@ -4,6 +4,9 @@ config SCORE
        def_bool y
        select HAVE_GENERIC_HARDIRQS
        select GENERIC_IRQ_SHOW
+       select HAVE_MEMBLOCK
+       select HAVE_MEMBLOCK_NODE_MAP
+       select ARCH_DISCARD_MEMBLOCK
 
 choice
 	prompt "System type"
@@ -60,9 +63,6 @@ config 32BIT
 config ARCH_FLATMEM_ENABLE
 	def_bool y
 
-config ARCH_POPULATES_NODE_MAP
-	def_bool y
-
 source "mm/Kconfig"
 
 config MEMORY_START
diff --git a/arch/score/kernel/setup.c b/arch/score/kernel/setup.c
index 6f898c0..b48459a 100644
--- a/arch/score/kernel/setup.c
+++ b/arch/score/kernel/setup.c
@@ -26,6 +26,7 @@
 #include <linux/bootmem.h>
 #include <linux/initrd.h>
 #include <linux/ioport.h>
+#include <linux/memblock.h>
 #include <linux/mm.h>
 #include <linux/seq_file.h>
 #include <linux/screen_info.h>
@@ -54,7 +55,8 @@ static void __init bootmem_init(void)
 	/* Initialize the boot-time allocator with low memory only. */
 	bootmap_size = init_bootmem_node(NODE_DATA(0), start_pfn,
 					 min_low_pfn, max_low_pfn);
-	add_active_range(0, min_low_pfn, max_low_pfn);
+	memblock_add_node(PFN_PHYS(min_low_pfn),
+			  PFN_PHYS(max_low_pfn - min_low_pfn), 0);
 
 	free_bootmem(PFN_PHYS(start_pfn),
 		     (max_low_pfn - start_pfn) << PAGE_SHIFT);
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 5629e20..47a2f1c 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -4,6 +4,7 @@ config SUPERH
 	select CLKDEV_LOOKUP
 	select HAVE_IDE if HAS_IOPORT
 	select HAVE_MEMBLOCK
+	select HAVE_MEMBLOCK_NODE_MAP
 	select HAVE_OPROFILE
 	select HAVE_GENERIC_DMA_COHERENT
 	select HAVE_ARCH_TRACEHOOK
diff --git a/arch/sh/drivers/dma/dma-sysfs.c b/arch/sh/drivers/dma/dma-sysfs.c
index 83cc704..b1cb271 100644
--- a/arch/sh/drivers/dma/dma-sysfs.c
+++ b/arch/sh/drivers/dma/dma-sysfs.c
@@ -12,18 +12,19 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/stat.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/err.h>
 #include <linux/string.h>
 #include <asm/dma.h>
 
-static struct sysdev_class dma_sysclass = {
+static struct bus_type dma_subsys = {
 	.name = "dma",
+	.dev_name = "dma",
 };
 
-static ssize_t dma_show_devices(struct sys_device *dev,
-				struct sysdev_attribute *attr, char *buf)
+static ssize_t dma_show_devices(struct device *dev,
+				struct device_attribute *attr, char *buf)
 {
 	ssize_t len = 0;
 	int i;
@@ -43,29 +44,29 @@ static ssize_t dma_show_devices(struct sys_device *dev,
 	return len;
 }
 
-static SYSDEV_ATTR(devices, S_IRUGO, dma_show_devices, NULL);
+static DEVICE_ATTR(devices, S_IRUGO, dma_show_devices, NULL);
 
-static int __init dma_sysclass_init(void)
+static int __init dma_subsys_init(void)
 {
 	int ret;
 
-	ret = sysdev_class_register(&dma_sysclass);
+	ret = subsys_system_register(&dma_subsys, NULL);
 	if (unlikely(ret))
 		return ret;
 
-	return sysfs_create_file(&dma_sysclass.kset.kobj, &attr_devices.attr);
+	return device_create_file(dma_subsys.dev_root, &dev_attr_devices.attr);
 }
-postcore_initcall(dma_sysclass_init);
+postcore_initcall(dma_subsys_init);
 
-static ssize_t dma_show_dev_id(struct sys_device *dev,
-				struct sysdev_attribute *attr, char *buf)
+static ssize_t dma_show_dev_id(struct device *dev,
+				struct device_attribute *attr, char *buf)
 {
 	struct dma_channel *channel = to_dma_channel(dev);
 	return sprintf(buf, "%s\n", channel->dev_id);
 }
 
-static ssize_t dma_store_dev_id(struct sys_device *dev,
-				struct sysdev_attribute *attr,
+static ssize_t dma_store_dev_id(struct device *dev,
+				struct device_attribute *attr,
 				const char *buf, size_t count)
 {
 	struct dma_channel *channel = to_dma_channel(dev);
@@ -73,10 +74,10 @@ static ssize_t dma_store_dev_id(struct sys_device *dev,
 	return count;
 }
 
-static SYSDEV_ATTR(dev_id, S_IRUGO | S_IWUSR, dma_show_dev_id, dma_store_dev_id);
+static DEVICE_ATTR(dev_id, S_IRUGO | S_IWUSR, dma_show_dev_id, dma_store_dev_id);
 
-static ssize_t dma_store_config(struct sys_device *dev,
-				struct sysdev_attribute *attr,
+static ssize_t dma_store_config(struct device *dev,
+				struct device_attribute *attr,
 				const char *buf, size_t count)
 {
 	struct dma_channel *channel = to_dma_channel(dev);
@@ -88,17 +89,17 @@ static ssize_t dma_store_config(struct sys_device *dev,
 	return count;
 }
 
-static SYSDEV_ATTR(config, S_IWUSR, NULL, dma_store_config);
+static DEVICE_ATTR(config, S_IWUSR, NULL, dma_store_config);
 
-static ssize_t dma_show_mode(struct sys_device *dev,
-				struct sysdev_attribute *attr, char *buf)
+static ssize_t dma_show_mode(struct device *dev,
+				struct device_attribute *attr, char *buf)
 {
 	struct dma_channel *channel = to_dma_channel(dev);
 	return sprintf(buf, "0x%08x\n", channel->mode);
 }
 
-static ssize_t dma_store_mode(struct sys_device *dev,
-			      struct sysdev_attribute *attr,
+static ssize_t dma_store_mode(struct device *dev,
+			      struct device_attribute *attr,
 			      const char *buf, size_t count)
 {
 	struct dma_channel *channel = to_dma_channel(dev);
@@ -106,38 +107,38 @@ static ssize_t dma_store_mode(struct sys_device *dev,
 	return count;
 }
 
-static SYSDEV_ATTR(mode, S_IRUGO | S_IWUSR, dma_show_mode, dma_store_mode);
+static DEVICE_ATTR(mode, S_IRUGO | S_IWUSR, dma_show_mode, dma_store_mode);
 
 #define dma_ro_attr(field, fmt)						\
-static ssize_t dma_show_##field(struct sys_device *dev, 		\
-				struct sysdev_attribute *attr, char *buf)\
+static ssize_t dma_show_##field(struct device *dev,		\
+				struct device_attribute *attr, char *buf)\
 {									\
 	struct dma_channel *channel = to_dma_channel(dev);		\
 	return sprintf(buf, fmt, channel->field);			\
 }									\
-static SYSDEV_ATTR(field, S_IRUGO, dma_show_##field, NULL);
+static DEVICE_ATTR(field, S_IRUGO, dma_show_##field, NULL);
 
 dma_ro_attr(count, "0x%08x\n");
 dma_ro_attr(flags, "0x%08lx\n");
 
 int dma_create_sysfs_files(struct dma_channel *chan, struct dma_info *info)
 {
-	struct sys_device *dev = &chan->dev;
+	struct device *dev = &chan->dev;
 	char name[16];
 	int ret;
 
 	dev->id  = chan->vchan;
-	dev->cls = &dma_sysclass;
+	dev->bus = &dma_subsys;
 
-	ret = sysdev_register(dev);
+	ret = device_register(dev);
 	if (ret)
 		return ret;
 
-	ret |= sysdev_create_file(dev, &attr_dev_id);
-	ret |= sysdev_create_file(dev, &attr_count);
-	ret |= sysdev_create_file(dev, &attr_mode);
-	ret |= sysdev_create_file(dev, &attr_flags);
-	ret |= sysdev_create_file(dev, &attr_config);
+	ret |= device_create_file(dev, &dev_attr_dev_id);
+	ret |= device_create_file(dev, &dev_attr_count);
+	ret |= device_create_file(dev, &dev_attr_mode);
+	ret |= device_create_file(dev, &dev_attr_flags);
+	ret |= device_create_file(dev, &dev_attr_config);
 
 	if (unlikely(ret)) {
 		dev_err(&info->pdev->dev, "Failed creating attrs\n");
@@ -150,17 +151,17 @@ int dma_create_sysfs_files(struct dma_channel *chan, struct dma_info *info)
 
 void dma_remove_sysfs_files(struct dma_channel *chan, struct dma_info *info)
 {
-	struct sys_device *dev = &chan->dev;
+	struct device *dev = &chan->dev;
 	char name[16];
 
-	sysdev_remove_file(dev, &attr_dev_id);
-	sysdev_remove_file(dev, &attr_count);
-	sysdev_remove_file(dev, &attr_mode);
-	sysdev_remove_file(dev, &attr_flags);
-	sysdev_remove_file(dev, &attr_config);
+	device_remove_file(dev, &dev_attr_dev_id);
+	device_remove_file(dev, &dev_attr_count);
+	device_remove_file(dev, &dev_attr_mode);
+	device_remove_file(dev, &dev_attr_flags);
+	device_remove_file(dev, &dev_attr_config);
 
 	snprintf(name, sizeof(name), "dma%d", chan->chan);
 	sysfs_remove_link(&info->pdev->dev.kobj, name);
 
-	sysdev_unregister(dev);
+	device_unregister(dev);
 }
diff --git a/arch/sh/include/asm/dma.h b/arch/sh/include/asm/dma.h
index 07373a0..6aa2080 100644
--- a/arch/sh/include/asm/dma.h
+++ b/arch/sh/include/asm/dma.h
@@ -14,7 +14,7 @@
 #include <linux/spinlock.h>
 #include <linux/wait.h>
 #include <linux/sched.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <cpu/dma.h>
 #include <asm-generic/dma.h>
 
@@ -91,7 +91,7 @@ struct dma_channel {
 
 	wait_queue_head_t wait_queue;
 
-	struct sys_device dev;
+	struct device dev;
 	void *priv_data;
 };
 
diff --git a/arch/sh/include/asm/memblock.h b/arch/sh/include/asm/memblock.h
deleted file mode 100644
index e87063f..0000000
--- a/arch/sh/include/asm/memblock.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __ASM_SH_MEMBLOCK_H
-#define __ASM_SH_MEMBLOCK_H
-
-#endif /* __ASM_SH_MEMBLOCK_H */
diff --git a/arch/sh/include/asm/thread_info.h b/arch/sh/include/asm/thread_info.h
index ea2d508..20ee40a 100644
--- a/arch/sh/include/asm/thread_info.h
+++ b/arch/sh/include/asm/thread_info.h
@@ -122,7 +122,6 @@ extern void init_thread_xstate(void);
 #define TIF_SYSCALL_TRACEPOINT	8	/* for ftrace syscall instrumentation */
 #define TIF_POLLING_NRFLAG	17	/* true if poll_idle() is polling TIF_NEED_RESCHED */
 #define TIF_MEMDIE		18	/* is terminating due to OOM killer */
-#define TIF_FREEZE		19	/* Freezing for suspend */
 
 #define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
@@ -133,7 +132,6 @@ extern void init_thread_xstate(void);
 #define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
 #define _TIF_SYSCALL_TRACEPOINT	(1 << TIF_SYSCALL_TRACEPOINT)
 #define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
-#define _TIF_FREEZE		(1 << TIF_FREEZE)
 
 /*
  * _TIF_ALLWORK_MASK and _TIF_WORK_MASK need to fit within 2 bytes, or we
diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c
index f090799..a8140f0 100644
--- a/arch/sh/kernel/cpu/sh4/sq.c
+++ b/arch/sh/kernel/cpu/sh4/sq.c
@@ -13,7 +13,7 @@
 #include <linux/init.h>
 #include <linux/cpu.h>
 #include <linux/bitmap.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/slab.h>
@@ -337,9 +337,9 @@ static struct kobj_type ktype_percpu_entry = {
 	.default_attrs	= sq_sysfs_attrs,
 };
 
-static int __devinit sq_sysdev_add(struct sys_device *sysdev)
+static int __devinit sq_dev_add(struct device *dev)
 {
-	unsigned int cpu = sysdev->id;
+	unsigned int cpu = dev->id;
 	struct kobject *kobj;
 	int error;
 
@@ -348,25 +348,27 @@ static int __devinit sq_sysdev_add(struct sys_device *sysdev)
 		return -ENOMEM;
 
 	kobj = sq_kobject[cpu];
-	error = kobject_init_and_add(kobj, &ktype_percpu_entry, &sysdev->kobj,
+	error = kobject_init_and_add(kobj, &ktype_percpu_entry, &dev->kobj,
 				     "%s", "sq");
 	if (!error)
 		kobject_uevent(kobj, KOBJ_ADD);
 	return error;
 }
 
-static int __devexit sq_sysdev_remove(struct sys_device *sysdev)
+static int __devexit sq_dev_remove(struct device *dev)
 {
-	unsigned int cpu = sysdev->id;
+	unsigned int cpu = dev->id;
 	struct kobject *kobj = sq_kobject[cpu];
 
 	kobject_put(kobj);
 	return 0;
 }
 
-static struct sysdev_driver sq_sysdev_driver = {
-	.add		= sq_sysdev_add,
-	.remove		= __devexit_p(sq_sysdev_remove),
+static struct subsys_interface sq_interface = {
+	.name		= "sq"
+	.subsys		= &cpu_subsys,
+	.add_dev	= sq_dev_add,
+	.remove_dev	= __devexit_p(sq_dev_remove),
 };
 
 static int __init sq_api_init(void)
@@ -386,7 +388,7 @@ static int __init sq_api_init(void)
 	if (unlikely(!sq_bitmap))
 		goto out;
 
-	ret = sysdev_driver_register(&cpu_sysdev_class, &sq_sysdev_driver);
+	ret = subsys_interface_register(&sq_interface);
 	if (unlikely(ret != 0))
 		goto out;
 
@@ -401,7 +403,7 @@ out:
 
 static void __exit sq_api_exit(void)
 {
-	sysdev_driver_unregister(&cpu_sysdev_class, &sq_sysdev_driver);
+	subsys_interface_unregister(&sq_interface);
 	kfree(sq_bitmap);
 	kmem_cache_destroy(sq_cache);
 }
diff --git a/arch/sh/kernel/idle.c b/arch/sh/kernel/idle.c
index db4ecd7..406508d 100644
--- a/arch/sh/kernel/idle.c
+++ b/arch/sh/kernel/idle.c
@@ -89,7 +89,8 @@ void cpu_idle(void)
 
 	/* endless idle loop with no priority at all */
 	while (1) {
-		tick_nohz_stop_sched_tick(1);
+		tick_nohz_idle_enter();
+		rcu_idle_enter();
 
 		while (!need_resched()) {
 			check_pgt_cache();
@@ -111,7 +112,8 @@ void cpu_idle(void)
 			start_critical_timings();
 		}
 
-		tick_nohz_restart_sched_tick();
+		rcu_idle_exit();
+		tick_nohz_idle_exit();
 		preempt_enable_no_resched();
 		schedule();
 		preempt_disable();
diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c
index c5a33f0..9fea49f 100644
--- a/arch/sh/kernel/machine_kexec.c
+++ b/arch/sh/kernel/machine_kexec.c
@@ -157,9 +157,6 @@ void __init reserve_crashkernel(void)
 	unsigned long long crash_size, crash_base;
 	int ret;
 
-	/* this is necessary because of memblock_phys_mem_size() */
-	memblock_analyze();
-
 	ret = parse_crashkernel(boot_command_line, memblock_phys_mem_size(),
 			&crash_size, &crash_base);
 	if (ret == 0 && crash_size > 0) {
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 1a0e946..7b57bf1 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -230,7 +230,8 @@ void __init __add_active_range(unsigned int nid, unsigned long start_pfn,
 	pmb_bolt_mapping((unsigned long)__va(start), start, end - start,
 			 PAGE_KERNEL);
 
-	add_active_range(nid, start_pfn, end_pfn);
+	memblock_set_node(PFN_PHYS(start_pfn),
+			  PFN_PHYS(end_pfn - start_pfn), nid);
 }
 
 void __init __weak plat_early_device_setup(void)
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index c3e61b3..cb8f992 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -143,9 +143,6 @@ config MAX_ACTIVE_REGIONS
 		       CPU_SUBTYPE_SH7785)
 	default "1"
 
-config ARCH_POPULATES_NODE_MAP
-	def_bool y
-
 config ARCH_SELECT_MEMORY_MODEL
 	def_bool y
 
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index 939ca0f..82cc576 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -324,7 +324,6 @@ void __init paging_init(void)
 	unsigned long vaddr, end;
 	int nid;
 
-	memblock_init();
 	sh_mv.mv_mem_init();
 
 	early_reserve_mem();
@@ -337,7 +336,7 @@ void __init paging_init(void)
 		sh_mv.mv_mem_reserve();
 
 	memblock_enforce_memory_limit(memory_limit);
-	memblock_analyze();
+	memblock_allow_resize();
 
 	memblock_dump_all();
 
diff --git a/arch/sh/oprofile/common.c b/arch/sh/oprofile/common.c
index b4c2d2b..e4dd5d5 100644
--- a/arch/sh/oprofile/common.c
+++ b/arch/sh/oprofile/common.c
@@ -49,7 +49,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
 	return oprofile_perf_init(ops);
 }
 
-void __exit oprofile_arch_exit(void)
+void oprofile_arch_exit(void)
 {
 	oprofile_perf_exit();
 	kfree(sh_pmu_op_name);
@@ -60,5 +60,5 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
 	ops->backtrace = sh_backtrace;
 	return -ENODEV;
 }
-void __exit oprofile_arch_exit(void) {}
+void oprofile_arch_exit(void) {}
 #endif /* CONFIG_HW_PERF_EVENTS */
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index f92602e..70ae9d8 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -43,6 +43,7 @@ config SPARC64
 	select HAVE_KPROBES
 	select HAVE_RCU_TABLE_FREE if SMP
 	select HAVE_MEMBLOCK
+	select HAVE_MEMBLOCK_NODE_MAP
 	select HAVE_SYSCALL_WRAPPERS
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_FTRACE_MCOUNT_RECORD
@@ -352,9 +353,6 @@ config NODES_SPAN_OTHER_NODES
 	def_bool y
 	depends on NEED_MULTIPLE_NODES
 
-config ARCH_POPULATES_NODE_MAP
-	def_bool y if SPARC64
-
 config ARCH_SELECT_MEMORY_MODEL
 	def_bool y if SPARC64
 
diff --git a/arch/sparc/include/asm/memblock.h b/arch/sparc/include/asm/memblock.h
deleted file mode 100644
index c67b047..0000000
--- a/arch/sparc/include/asm/memblock.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _SPARC64_MEMBLOCK_H
-#define _SPARC64_MEMBLOCK_H
-
-#include <asm/oplib.h>
-
-#define MEMBLOCK_DBG(fmt...) prom_printf(fmt)
-
-#endif /* !(_SPARC64_MEMBLOCK_H) */
diff --git a/arch/sparc/include/asm/posix_types.h b/arch/sparc/include/asm/posix_types.h
index 98d6ebb..dbfc1a3 100644
--- a/arch/sparc/include/asm/posix_types.h
+++ b/arch/sparc/include/asm/posix_types.h
@@ -20,7 +20,6 @@ typedef unsigned int           __kernel_uid_t;
 typedef unsigned int           __kernel_gid_t;
 typedef unsigned long          __kernel_ino_t;
 typedef unsigned int           __kernel_mode_t;
-typedef unsigned short         __kernel_umode_t;
 typedef unsigned int           __kernel_nlink_t;
 typedef int                    __kernel_daddr_t;
 typedef long                   __kernel_off_t;
@@ -55,7 +54,6 @@ typedef unsigned short         __kernel_uid_t;
 typedef unsigned short         __kernel_gid_t;
 typedef unsigned long          __kernel_ino_t;
 typedef unsigned short         __kernel_mode_t;
-typedef unsigned short         __kernel_umode_t;
 typedef short                  __kernel_nlink_t;
 typedef long                   __kernel_daddr_t;
 typedef long                   __kernel_off_t;
diff --git a/arch/sparc/include/asm/socket.h b/arch/sparc/include/asm/socket.h
index 9d3fefc..8af1b64 100644
--- a/arch/sparc/include/asm/socket.h
+++ b/arch/sparc/include/asm/socket.h
@@ -58,6 +58,9 @@
 
 #define SO_RXQ_OVFL             0x0024
 
+#define SO_WIFI_STATUS		0x0025
+#define SCM_WIFI_STATUS		SO_WIFI_STATUS
+
 /* Security levels - as per NRL IPv6 - don't actually do anything */
 #define SO_SECURITY_AUTHENTICATION		0x5001
 #define SO_SECURITY_ENCRYPTION_TRANSPORT	0x5002
diff --git a/arch/sparc/include/asm/thread_info_32.h b/arch/sparc/include/asm/thread_info_32.h
index fa57532..5cc5888 100644
--- a/arch/sparc/include/asm/thread_info_32.h
+++ b/arch/sparc/include/asm/thread_info_32.h
@@ -133,7 +133,6 @@ BTFIXUPDEF_CALL(void, free_thread_info, struct thread_info *)
 #define TIF_POLLING_NRFLAG	9	/* true if poll_idle() is polling
 					 * TIF_NEED_RESCHED */
 #define TIF_MEMDIE		10	/* is terminating due to OOM killer */
-#define TIF_FREEZE		11	/* is freezing for suspend */
 
 /* as above, but as bit values */
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
@@ -147,7 +146,6 @@ BTFIXUPDEF_CALL(void, free_thread_info, struct thread_info *)
 #define _TIF_DO_NOTIFY_RESUME_MASK	(_TIF_NOTIFY_RESUME | \
 					 _TIF_SIGPENDING | \
 					 _TIF_RESTORE_SIGMASK)
-#define _TIF_FREEZE		(1<<TIF_FREEZE)
 
 #endif /* __KERNEL__ */
 
diff --git a/arch/sparc/include/asm/thread_info_64.h b/arch/sparc/include/asm/thread_info_64.h
index 60d86be..01d057f 100644
--- a/arch/sparc/include/asm/thread_info_64.h
+++ b/arch/sparc/include/asm/thread_info_64.h
@@ -225,7 +225,6 @@ register struct thread_info *current_thread_info_reg asm("g6");
 /* flag bit 12 is available */
 #define TIF_MEMDIE		13	/* is terminating due to OOM killer */
 #define TIF_POLLING_NRFLAG	14
-#define TIF_FREEZE		15	/* is freezing for suspend */
 
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
 #define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
@@ -237,7 +236,6 @@ register struct thread_info *current_thread_info_reg asm("g6");
 #define _TIF_SYSCALL_AUDIT	(1<<TIF_SYSCALL_AUDIT)
 #define _TIF_SYSCALL_TRACEPOINT	(1<<TIF_SYSCALL_TRACEPOINT)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
-#define _TIF_FREEZE		(1<<TIF_FREEZE)
 
 #define _TIF_USER_WORK_MASK	((0xff << TI_FLAG_WSAVED_SHIFT) | \
 				 _TIF_DO_NOTIFY_RESUME_MASK | \
diff --git a/arch/sparc/include/asm/types.h b/arch/sparc/include/asm/types.h
index 91e5a03..383d156 100644
--- a/arch/sparc/include/asm/types.h
+++ b/arch/sparc/include/asm/types.h
@@ -12,12 +12,6 @@
 
 #include <asm-generic/int-ll64.h>
 
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-#endif /* __ASSEMBLY__ */
-
 #endif /* defined(__sparc__) */
 
 #endif /* defined(_SPARC_TYPES_H) */
diff --git a/arch/sparc/kernel/ds.c b/arch/sparc/kernel/ds.c
index 7429b47..381edcd 100644
--- a/arch/sparc/kernel/ds.c
+++ b/arch/sparc/kernel/ds.c
@@ -1181,13 +1181,11 @@ static int __devinit ds_probe(struct vio_dev *vdev,
 
 	dp->rcv_buf_len = 4096;
 
-	dp->ds_states = kzalloc(sizeof(ds_states_template),
-				GFP_KERNEL);
+	dp->ds_states = kmemdup(ds_states_template,
+				sizeof(ds_states_template), GFP_KERNEL);
 	if (!dp->ds_states)
 		goto out_free_rcv_buf;
 
-	memcpy(dp->ds_states, ds_states_template,
-	       sizeof(ds_states_template));
 	dp->num_ds_states = ARRAY_SIZE(ds_states_template);
 
 	for (i = 0; i < dp->num_ds_states; i++)
diff --git a/arch/sparc/kernel/pci_sun4v.c b/arch/sparc/kernel/pci_sun4v.c
index b272cda..af5755d 100644
--- a/arch/sparc/kernel/pci_sun4v.c
+++ b/arch/sparc/kernel/pci_sun4v.c
@@ -849,10 +849,10 @@ static int pci_sun4v_msiq_build_irq(struct pci_pbm_info *pbm,
 	if (!irq)
 		return -ENOMEM;
 
-	if (pci_sun4v_msiq_setstate(pbm->devhandle, msiqid, HV_MSIQSTATE_IDLE))
-		return -EINVAL;
 	if (pci_sun4v_msiq_setvalid(pbm->devhandle, msiqid, HV_MSIQ_VALID))
 		return -EINVAL;
+	if (pci_sun4v_msiq_setstate(pbm->devhandle, msiqid, HV_MSIQSTATE_IDLE))
+		return -EINVAL;
 
 	return irq;
 }
diff --git a/arch/sparc/kernel/process_64.c b/arch/sparc/kernel/process_64.c
index 3739a06..39d8b05 100644
--- a/arch/sparc/kernel/process_64.c
+++ b/arch/sparc/kernel/process_64.c
@@ -95,12 +95,14 @@ void cpu_idle(void)
 	set_thread_flag(TIF_POLLING_NRFLAG);
 
 	while(1) {
-		tick_nohz_stop_sched_tick(1);
+		tick_nohz_idle_enter();
+		rcu_idle_enter();
 
 		while (!need_resched() && !cpu_is_offline(cpu))
 			sparc64_yield(cpu);
 
-		tick_nohz_restart_sched_tick();
+		rcu_idle_exit();
+		tick_nohz_idle_exit();
 
 		preempt_enable_no_resched();
 
diff --git a/arch/sparc/kernel/prom_common.c b/arch/sparc/kernel/prom_common.c
index 4661480..741df91 100644
--- a/arch/sparc/kernel/prom_common.c
+++ b/arch/sparc/kernel/prom_common.c
@@ -58,12 +58,10 @@ int of_set_property(struct device_node *dp, const char *name, void *val, int len
 	void *new_val;
 	int err;
 
-	new_val = kmalloc(len, GFP_KERNEL);
+	new_val = kmemdup(val, len, GFP_KERNEL);
 	if (!new_val)
 		return -ENOMEM;
 
-	memcpy(new_val, val, len);
-
 	err = -ENODEV;
 
 	mutex_lock(&of_set_property_mutex);
diff --git a/arch/sparc/kernel/setup_32.c b/arch/sparc/kernel/setup_32.c
index fe1e3fc..ffb883d 100644
--- a/arch/sparc/kernel/setup_32.c
+++ b/arch/sparc/kernel/setup_32.c
@@ -84,7 +84,7 @@ static void prom_sync_me(void)
 
 	prom_printf("PROM SYNC COMMAND...\n");
 	show_free_areas(0);
-	if(current->pid != 0) {
+	if (!is_idle_task(current)) {
 		local_irq_enable();
 		sys_sync();
 		local_irq_disable();
diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c
index 7560772..3b1bd7c 100644
--- a/arch/sparc/kernel/smp_64.c
+++ b/arch/sparc/kernel/smp_64.c
@@ -840,7 +840,7 @@ static void tsb_sync(void *info)
 	struct trap_per_cpu *tp = &trap_block[raw_smp_processor_id()];
 	struct mm_struct *mm = info;
 
-	/* It is not valid to test "currrent->active_mm == mm" here.
+	/* It is not valid to test "current->active_mm == mm" here.
 	 *
 	 * The value of "current" is not changed atomically with
 	 * switch_mm().  But that's OK, we just need to check the
diff --git a/arch/sparc/kernel/sys_sparc_64.c b/arch/sparc/kernel/sys_sparc_64.c
index 441521a..232df99 100644
--- a/arch/sparc/kernel/sys_sparc_64.c
+++ b/arch/sparc/kernel/sys_sparc_64.c
@@ -368,11 +368,11 @@ static unsigned long mmap_rnd(void)
 	if (current->flags & PF_RANDOMIZE) {
 		unsigned long val = get_random_int();
 		if (test_thread_flag(TIF_32BIT))
-			rnd = (val % (1UL << (22UL-PAGE_SHIFT)));
+			rnd = (val % (1UL << (23UL-PAGE_SHIFT)));
 		else
-			rnd = (val % (1UL << (29UL-PAGE_SHIFT)));
+			rnd = (val % (1UL << (30UL-PAGE_SHIFT)));
 	}
-	return (rnd << PAGE_SHIFT) * 2;
+	return rnd << PAGE_SHIFT;
 }
 
 void arch_pick_mmap_layout(struct mm_struct *mm)
diff --git a/arch/sparc/kernel/sysfs.c b/arch/sparc/kernel/sysfs.c
index 7408201..654e8aa 100644
--- a/arch/sparc/kernel/sysfs.c
+++ b/arch/sparc/kernel/sysfs.c
@@ -3,7 +3,7 @@
  * Copyright (C) 2007 David S. Miller <davem@davemloft.net>
  */
 #include <linux/sched.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/cpu.h>
 #include <linux/smp.h>
 #include <linux/percpu.h>
@@ -16,13 +16,13 @@
 static DEFINE_PER_CPU(struct hv_mmu_statistics, mmu_stats) __attribute__((aligned(64)));
 
 #define SHOW_MMUSTAT_ULONG(NAME) \
-static ssize_t show_##NAME(struct sys_device *dev, \
-			struct sysdev_attribute *attr, char *buf) \
+static ssize_t show_##NAME(struct device *dev, \
+			struct device_attribute *attr, char *buf) \
 { \
 	struct hv_mmu_statistics *p = &per_cpu(mmu_stats, dev->id); \
 	return sprintf(buf, "%lu\n", p->NAME); \
 } \
-static SYSDEV_ATTR(NAME, 0444, show_##NAME, NULL)
+static DEVICE_ATTR(NAME, 0444, show_##NAME, NULL)
 
 SHOW_MMUSTAT_ULONG(immu_tsb_hits_ctx0_8k_tte);
 SHOW_MMUSTAT_ULONG(immu_tsb_ticks_ctx0_8k_tte);
@@ -58,38 +58,38 @@ SHOW_MMUSTAT_ULONG(dmmu_tsb_hits_ctxnon0_256mb_tte);
 SHOW_MMUSTAT_ULONG(dmmu_tsb_ticks_ctxnon0_256mb_tte);
 
 static struct attribute *mmu_stat_attrs[] = {
-	&attr_immu_tsb_hits_ctx0_8k_tte.attr,
-	&attr_immu_tsb_ticks_ctx0_8k_tte.attr,
-	&attr_immu_tsb_hits_ctx0_64k_tte.attr,
-	&attr_immu_tsb_ticks_ctx0_64k_tte.attr,
-	&attr_immu_tsb_hits_ctx0_4mb_tte.attr,
-	&attr_immu_tsb_ticks_ctx0_4mb_tte.attr,
-	&attr_immu_tsb_hits_ctx0_256mb_tte.attr,
-	&attr_immu_tsb_ticks_ctx0_256mb_tte.attr,
-	&attr_immu_tsb_hits_ctxnon0_8k_tte.attr,
-	&attr_immu_tsb_ticks_ctxnon0_8k_tte.attr,
-	&attr_immu_tsb_hits_ctxnon0_64k_tte.attr,
-	&attr_immu_tsb_ticks_ctxnon0_64k_tte.attr,
-	&attr_immu_tsb_hits_ctxnon0_4mb_tte.attr,
-	&attr_immu_tsb_ticks_ctxnon0_4mb_tte.attr,
-	&attr_immu_tsb_hits_ctxnon0_256mb_tte.attr,
-	&attr_immu_tsb_ticks_ctxnon0_256mb_tte.attr,
-	&attr_dmmu_tsb_hits_ctx0_8k_tte.attr,
-	&attr_dmmu_tsb_ticks_ctx0_8k_tte.attr,
-	&attr_dmmu_tsb_hits_ctx0_64k_tte.attr,
-	&attr_dmmu_tsb_ticks_ctx0_64k_tte.attr,
-	&attr_dmmu_tsb_hits_ctx0_4mb_tte.attr,
-	&attr_dmmu_tsb_ticks_ctx0_4mb_tte.attr,
-	&attr_dmmu_tsb_hits_ctx0_256mb_tte.attr,
-	&attr_dmmu_tsb_ticks_ctx0_256mb_tte.attr,
-	&attr_dmmu_tsb_hits_ctxnon0_8k_tte.attr,
-	&attr_dmmu_tsb_ticks_ctxnon0_8k_tte.attr,
-	&attr_dmmu_tsb_hits_ctxnon0_64k_tte.attr,
-	&attr_dmmu_tsb_ticks_ctxnon0_64k_tte.attr,
-	&attr_dmmu_tsb_hits_ctxnon0_4mb_tte.attr,
-	&attr_dmmu_tsb_ticks_ctxnon0_4mb_tte.attr,
-	&attr_dmmu_tsb_hits_ctxnon0_256mb_tte.attr,
-	&attr_dmmu_tsb_ticks_ctxnon0_256mb_tte.attr,
+	&dev_attr_immu_tsb_hits_ctx0_8k_tte.attr,
+	&dev_attr_immu_tsb_ticks_ctx0_8k_tte.attr,
+	&dev_attr_immu_tsb_hits_ctx0_64k_tte.attr,
+	&dev_attr_immu_tsb_ticks_ctx0_64k_tte.attr,
+	&dev_attr_immu_tsb_hits_ctx0_4mb_tte.attr,
+	&dev_attr_immu_tsb_ticks_ctx0_4mb_tte.attr,
+	&dev_attr_immu_tsb_hits_ctx0_256mb_tte.attr,
+	&dev_attr_immu_tsb_ticks_ctx0_256mb_tte.attr,
+	&dev_attr_immu_tsb_hits_ctxnon0_8k_tte.attr,
+	&dev_attr_immu_tsb_ticks_ctxnon0_8k_tte.attr,
+	&dev_attr_immu_tsb_hits_ctxnon0_64k_tte.attr,
+	&dev_attr_immu_tsb_ticks_ctxnon0_64k_tte.attr,
+	&dev_attr_immu_tsb_hits_ctxnon0_4mb_tte.attr,
+	&dev_attr_immu_tsb_ticks_ctxnon0_4mb_tte.attr,
+	&dev_attr_immu_tsb_hits_ctxnon0_256mb_tte.attr,
+	&dev_attr_immu_tsb_ticks_ctxnon0_256mb_tte.attr,
+	&dev_attr_dmmu_tsb_hits_ctx0_8k_tte.attr,
+	&dev_attr_dmmu_tsb_ticks_ctx0_8k_tte.attr,
+	&dev_attr_dmmu_tsb_hits_ctx0_64k_tte.attr,
+	&dev_attr_dmmu_tsb_ticks_ctx0_64k_tte.attr,
+	&dev_attr_dmmu_tsb_hits_ctx0_4mb_tte.attr,
+	&dev_attr_dmmu_tsb_ticks_ctx0_4mb_tte.attr,
+	&dev_attr_dmmu_tsb_hits_ctx0_256mb_tte.attr,
+	&dev_attr_dmmu_tsb_ticks_ctx0_256mb_tte.attr,
+	&dev_attr_dmmu_tsb_hits_ctxnon0_8k_tte.attr,
+	&dev_attr_dmmu_tsb_ticks_ctxnon0_8k_tte.attr,
+	&dev_attr_dmmu_tsb_hits_ctxnon0_64k_tte.attr,
+	&dev_attr_dmmu_tsb_ticks_ctxnon0_64k_tte.attr,
+	&dev_attr_dmmu_tsb_hits_ctxnon0_4mb_tte.attr,
+	&dev_attr_dmmu_tsb_ticks_ctxnon0_4mb_tte.attr,
+	&dev_attr_dmmu_tsb_hits_ctxnon0_256mb_tte.attr,
+	&dev_attr_dmmu_tsb_ticks_ctxnon0_256mb_tte.attr,
 	NULL,
 };
 
@@ -139,15 +139,15 @@ static unsigned long write_mmustat_enable(unsigned long val)
 	return sun4v_mmustat_conf(ra, &orig_ra);
 }
 
-static ssize_t show_mmustat_enable(struct sys_device *s,
-				struct sysdev_attribute *attr, char *buf)
+static ssize_t show_mmustat_enable(struct device *s,
+				struct device_attribute *attr, char *buf)
 {
 	unsigned long val = run_on_cpu(s->id, read_mmustat_enable, 0);
 	return sprintf(buf, "%lx\n", val);
 }
 
-static ssize_t store_mmustat_enable(struct sys_device *s,
-			struct sysdev_attribute *attr, const char *buf,
+static ssize_t store_mmustat_enable(struct device *s,
+			struct device_attribute *attr, const char *buf,
 			size_t count)
 {
 	unsigned long val, err;
@@ -163,39 +163,39 @@ static ssize_t store_mmustat_enable(struct sys_device *s,
 	return count;
 }
 
-static SYSDEV_ATTR(mmustat_enable, 0644, show_mmustat_enable, store_mmustat_enable);
+static DEVICE_ATTR(mmustat_enable, 0644, show_mmustat_enable, store_mmustat_enable);
 
 static int mmu_stats_supported;
 
-static int register_mmu_stats(struct sys_device *s)
+static int register_mmu_stats(struct device *s)
 {
 	if (!mmu_stats_supported)
 		return 0;
-	sysdev_create_file(s, &attr_mmustat_enable);
+	device_create_file(s, &dev_attr_mmustat_enable);
 	return sysfs_create_group(&s->kobj, &mmu_stat_group);
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
-static void unregister_mmu_stats(struct sys_device *s)
+static void unregister_mmu_stats(struct device *s)
 {
 	if (!mmu_stats_supported)
 		return;
 	sysfs_remove_group(&s->kobj, &mmu_stat_group);
-	sysdev_remove_file(s, &attr_mmustat_enable);
+	device_remove_file(s, &dev_attr_mmustat_enable);
 }
 #endif
 
 #define SHOW_CPUDATA_ULONG_NAME(NAME, MEMBER) \
-static ssize_t show_##NAME(struct sys_device *dev, \
-		struct sysdev_attribute *attr, char *buf) \
+static ssize_t show_##NAME(struct device *dev, \
+		struct device_attribute *attr, char *buf) \
 { \
 	cpuinfo_sparc *c = &cpu_data(dev->id); \
 	return sprintf(buf, "%lu\n", c->MEMBER); \
 }
 
 #define SHOW_CPUDATA_UINT_NAME(NAME, MEMBER) \
-static ssize_t show_##NAME(struct sys_device *dev, \
-		struct sysdev_attribute *attr, char *buf) \
+static ssize_t show_##NAME(struct device *dev, \
+		struct device_attribute *attr, char *buf) \
 { \
 	cpuinfo_sparc *c = &cpu_data(dev->id); \
 	return sprintf(buf, "%u\n", c->MEMBER); \
@@ -209,14 +209,14 @@ SHOW_CPUDATA_UINT_NAME(l1_icache_line_size, icache_line_size);
 SHOW_CPUDATA_UINT_NAME(l2_cache_size, ecache_size);
 SHOW_CPUDATA_UINT_NAME(l2_cache_line_size, ecache_line_size);
 
-static struct sysdev_attribute cpu_core_attrs[] = {
-	_SYSDEV_ATTR(clock_tick,          0444, show_clock_tick, NULL),
-	_SYSDEV_ATTR(l1_dcache_size,      0444, show_l1_dcache_size, NULL),
-	_SYSDEV_ATTR(l1_dcache_line_size, 0444, show_l1_dcache_line_size, NULL),
-	_SYSDEV_ATTR(l1_icache_size,      0444, show_l1_icache_size, NULL),
-	_SYSDEV_ATTR(l1_icache_line_size, 0444, show_l1_icache_line_size, NULL),
-	_SYSDEV_ATTR(l2_cache_size,       0444, show_l2_cache_size, NULL),
-	_SYSDEV_ATTR(l2_cache_line_size,  0444, show_l2_cache_line_size, NULL),
+static struct device_attribute cpu_core_attrs[] = {
+	__ATTR(clock_tick,          0444, show_clock_tick, NULL),
+	__ATTR(l1_dcache_size,      0444, show_l1_dcache_size, NULL),
+	__ATTR(l1_dcache_line_size, 0444, show_l1_dcache_line_size, NULL),
+	__ATTR(l1_icache_size,      0444, show_l1_icache_size, NULL),
+	__ATTR(l1_icache_line_size, 0444, show_l1_icache_line_size, NULL),
+	__ATTR(l2_cache_size,       0444, show_l2_cache_size, NULL),
+	__ATTR(l2_cache_line_size,  0444, show_l2_cache_line_size, NULL),
 };
 
 static DEFINE_PER_CPU(struct cpu, cpu_devices);
@@ -224,11 +224,11 @@ static DEFINE_PER_CPU(struct cpu, cpu_devices);
 static void register_cpu_online(unsigned int cpu)
 {
 	struct cpu *c = &per_cpu(cpu_devices, cpu);
-	struct sys_device *s = &c->sysdev;
+	struct device *s = &c->dev;
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(cpu_core_attrs); i++)
-		sysdev_create_file(s, &cpu_core_attrs[i]);
+		device_create_file(s, &cpu_core_attrs[i]);
 
 	register_mmu_stats(s);
 }
@@ -237,12 +237,12 @@ static void register_cpu_online(unsigned int cpu)
 static void unregister_cpu_online(unsigned int cpu)
 {
 	struct cpu *c = &per_cpu(cpu_devices, cpu);
-	struct sys_device *s = &c->sysdev;
+	struct device *s = &c->dev;
 	int i;
 
 	unregister_mmu_stats(s);
 	for (i = 0; i < ARRAY_SIZE(cpu_core_attrs); i++)
-		sysdev_remove_file(s, &cpu_core_attrs[i]);
+		device_remove_file(s, &cpu_core_attrs[i]);
 }
 #endif
 
diff --git a/arch/sparc/mm/btfixup.c b/arch/sparc/mm/btfixup.c
index 5175ac2..8a7f817 100644
--- a/arch/sparc/mm/btfixup.c
+++ b/arch/sparc/mm/btfixup.c
@@ -302,8 +302,7 @@ void __init btfixup(void)
 				case 'i':	/* INT */
 					if ((insn & 0xc1c00000) == 0x01000000) /* %HI */
 						set_addr(addr, q[1], fmangled, (insn & 0xffc00000) | (p[1] >> 10));
-					else if ((insn & 0x80002000) == 0x80002000 &&
-					         (insn & 0x01800000) != 0x01800000) /* %LO */
+					else if ((insn & 0x80002000) == 0x80002000) /* %LO */
 						set_addr(addr, q[1], fmangled, (insn & 0xffffe000) | (p[1] & 0x3ff));
 					else {
 						prom_printf(insn_i, p, addr, insn);
diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c
index 8e073d8..b3f5e7d 100644
--- a/arch/sparc/mm/init_64.c
+++ b/arch/sparc/mm/init_64.c
@@ -790,7 +790,7 @@ static int find_node(unsigned long addr)
 	return -1;
 }
 
-u64 memblock_nid_range(u64 start, u64 end, int *nid)
+static u64 memblock_nid_range(u64 start, u64 end, int *nid)
 {
 	*nid = find_node(start);
 	start += PAGE_SIZE;
@@ -808,7 +808,7 @@ u64 memblock_nid_range(u64 start, u64 end, int *nid)
 	return start;
 }
 #else
-u64 memblock_nid_range(u64 start, u64 end, int *nid)
+static u64 memblock_nid_range(u64 start, u64 end, int *nid)
 {
 	*nid = 0;
 	return end;
@@ -816,7 +816,7 @@ u64 memblock_nid_range(u64 start, u64 end, int *nid)
 #endif
 
 /* This must be invoked after performing all of the necessary
- * add_active_range() calls for 'nid'.  We need to be able to get
+ * memblock_set_node() calls for 'nid'.  We need to be able to get
  * correct data from get_pfn_range_for_nid().
  */
 static void __init allocate_node_data(int nid)
@@ -987,14 +987,11 @@ static void __init add_node_ranges(void)
 
 			this_end = memblock_nid_range(start, end, &nid);
 
-			numadbg("Adding active range nid[%d] "
+			numadbg("Setting memblock NUMA node nid[%d] "
 				"start[%lx] end[%lx]\n",
 				nid, start, this_end);
 
-			add_active_range(nid,
-					 start >> PAGE_SHIFT,
-					 this_end >> PAGE_SHIFT);
-
+			memblock_set_node(start, this_end - start, nid);
 			start = this_end;
 		}
 	}
@@ -1282,7 +1279,6 @@ static void __init bootmem_init_nonnuma(void)
 {
 	unsigned long top_of_ram = memblock_end_of_DRAM();
 	unsigned long total_ram = memblock_phys_mem_size();
-	struct memblock_region *reg;
 
 	numadbg("bootmem_init_nonnuma()\n");
 
@@ -1292,20 +1288,8 @@ static void __init bootmem_init_nonnuma(void)
 	       (top_of_ram - total_ram) >> 20);
 
 	init_node_masks_nonnuma();
-
-	for_each_memblock(memory, reg) {
-		unsigned long start_pfn, end_pfn;
-
-		if (!reg->size)
-			continue;
-
-		start_pfn = memblock_region_memory_base_pfn(reg);
-		end_pfn = memblock_region_memory_end_pfn(reg);
-		add_active_range(0, start_pfn, end_pfn);
-	}
-
+	memblock_set_node(0, (phys_addr_t)ULLONG_MAX, 0);
 	allocate_node_data(0);
-
 	node_set_online(0);
 }
 
@@ -1769,8 +1753,6 @@ void __init paging_init(void)
 		sun4v_ktsb_init();
 	}
 
-	memblock_init();
-
 	/* Find available physical memory...
 	 *
 	 * Read it twice in order to work around a bug in openfirmware.
@@ -1796,7 +1778,7 @@ void __init paging_init(void)
 
 	memblock_enforce_memory_limit(cmdline_memory_size);
 
-	memblock_analyze();
+	memblock_allow_resize();
 	memblock_dump_all();
 
 	set_bit(0, mmu_context_bmap);
diff --git a/arch/tile/include/asm/irq.h b/arch/tile/include/asm/irq.h
index 94e9a51..f80f8ce 100644
--- a/arch/tile/include/asm/irq.h
+++ b/arch/tile/include/asm/irq.h
@@ -74,16 +74,6 @@ enum {
  */
 void tile_irq_activate(unsigned int irq, int tile_irq_type);
 
-/*
- * For onboard, non-PCI (e.g. TILE_IRQ_PERCPU) devices, drivers know
- * how to use enable/disable_percpu_irq() to manage interrupts on each
- * core.  We can't use the generic enable/disable_irq() because they
- * use a single reference count per irq, rather than per cpu per irq.
- */
-void enable_percpu_irq(unsigned int irq);
-void disable_percpu_irq(unsigned int irq);
-
-
 void setup_irq_regs(void);
 
 #endif /* _ASM_TILE_IRQ_H */
diff --git a/arch/tile/kernel/irq.c b/arch/tile/kernel/irq.c
index aa0134d..02e6280 100644
--- a/arch/tile/kernel/irq.c
+++ b/arch/tile/kernel/irq.c
@@ -152,14 +152,13 @@ void tile_dev_intr(struct pt_regs *regs, int intnum)
  * Remove an irq from the disabled mask.  If we're in an interrupt
  * context, defer enabling the HW interrupt until we leave.
  */
-void enable_percpu_irq(unsigned int irq)
+static void tile_irq_chip_enable(struct irq_data *d)
 {
-	get_cpu_var(irq_disable_mask) &= ~(1UL << irq);
+	get_cpu_var(irq_disable_mask) &= ~(1UL << d->irq);
 	if (__get_cpu_var(irq_depth) == 0)
-		unmask_irqs(1UL << irq);
+		unmask_irqs(1UL << d->irq);
 	put_cpu_var(irq_disable_mask);
 }
-EXPORT_SYMBOL(enable_percpu_irq);
 
 /*
  * Add an irq to the disabled mask.  We disable the HW interrupt
@@ -167,13 +166,12 @@ EXPORT_SYMBOL(enable_percpu_irq);
  * in an interrupt context, the return path is careful to avoid
  * unmasking a newly disabled interrupt.
  */
-void disable_percpu_irq(unsigned int irq)
+static void tile_irq_chip_disable(struct irq_data *d)
 {
-	get_cpu_var(irq_disable_mask) |= (1UL << irq);
-	mask_irqs(1UL << irq);
+	get_cpu_var(irq_disable_mask) |= (1UL << d->irq);
+	mask_irqs(1UL << d->irq);
 	put_cpu_var(irq_disable_mask);
 }
-EXPORT_SYMBOL(disable_percpu_irq);
 
 /* Mask an interrupt. */
 static void tile_irq_chip_mask(struct irq_data *d)
@@ -209,6 +207,8 @@ static void tile_irq_chip_eoi(struct irq_data *d)
 
 static struct irq_chip tile_irq_chip = {
 	.name = "tile_irq_chip",
+	.irq_enable = tile_irq_chip_enable,
+	.irq_disable = tile_irq_chip_disable,
 	.irq_ack = tile_irq_chip_ack,
 	.irq_eoi = tile_irq_chip_eoi,
 	.irq_mask = tile_irq_chip_mask,
diff --git a/arch/tile/kernel/pci-dma.c b/arch/tile/kernel/pci-dma.c
index 658f2ce..b3ed19f 100644
--- a/arch/tile/kernel/pci-dma.c
+++ b/arch/tile/kernel/pci-dma.c
@@ -15,6 +15,7 @@
 #include <linux/mm.h>
 #include <linux/dma-mapping.h>
 #include <linux/vmalloc.h>
+#include <linux/export.h>
 #include <asm/tlbflush.h>
 #include <asm/homecache.h>
 
diff --git a/arch/tile/kernel/pci.c b/arch/tile/kernel/pci.c
index 2a8014c..9d610d3 100644
--- a/arch/tile/kernel/pci.c
+++ b/arch/tile/kernel/pci.c
@@ -24,6 +24,7 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/uaccess.h>
+#include <linux/export.h>
 
 #include <asm/processor.h>
 #include <asm/sections.h>
diff --git a/arch/tile/kernel/process.c b/arch/tile/kernel/process.c
index 9c45d8b..4c1ac6e 100644
--- a/arch/tile/kernel/process.c
+++ b/arch/tile/kernel/process.c
@@ -85,7 +85,8 @@ void cpu_idle(void)
 
 	/* endless idle loop with no priority at all */
 	while (1) {
-		tick_nohz_stop_sched_tick(1);
+		tick_nohz_idle_enter();
+		rcu_idle_enter();
 		while (!need_resched()) {
 			if (cpu_is_offline(cpu))
 				BUG();  /* no HOTPLUG_CPU */
@@ -105,7 +106,8 @@ void cpu_idle(void)
 				local_irq_enable();
 			current_thread_info()->status |= TS_POLLING;
 		}
-		tick_nohz_restart_sched_tick();
+		rcu_idle_exit();
+		tick_nohz_idle_exit();
 		preempt_enable_no_resched();
 		schedule();
 		preempt_disable();
diff --git a/arch/tile/kernel/sysfs.c b/arch/tile/kernel/sysfs.c
index b671a86..f862b00 100644
--- a/arch/tile/kernel/sysfs.c
+++ b/arch/tile/kernel/sysfs.c
@@ -14,10 +14,11 @@
  * /sys entry support.
  */
 
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/cpu.h>
 #include <linux/slab.h>
 #include <linux/smp.h>
+#include <linux/stat.h>
 #include <hv/hypervisor.h>
 
 /* Return a string queried from the hypervisor, truncated to page size. */
@@ -31,55 +32,55 @@ static ssize_t get_hv_confstr(char *page, int query)
 	return n;
 }
 
-static ssize_t chip_width_show(struct sysdev_class *dev,
-			       struct sysdev_class_attribute *attr,
+static ssize_t chip_width_show(struct device *dev,
+			       struct device_attribute *attr,
 			       char *page)
 {
 	return sprintf(page, "%u\n", smp_width);
 }
-static SYSDEV_CLASS_ATTR(chip_width, 0444, chip_width_show, NULL);
+static DEVICE_ATTR(chip_width, 0444, chip_width_show, NULL);
 
-static ssize_t chip_height_show(struct sysdev_class *dev,
-				struct sysdev_class_attribute *attr,
+static ssize_t chip_height_show(struct device *dev,
+				struct device_attribute *attr,
 				char *page)
 {
 	return sprintf(page, "%u\n", smp_height);
 }
-static SYSDEV_CLASS_ATTR(chip_height, 0444, chip_height_show, NULL);
+static DEVICE_ATTR(chip_height, 0444, chip_height_show, NULL);
 
-static ssize_t chip_serial_show(struct sysdev_class *dev,
-				struct sysdev_class_attribute *attr,
+static ssize_t chip_serial_show(struct device *dev,
+				struct device_attribute *attr,
 				char *page)
 {
 	return get_hv_confstr(page, HV_CONFSTR_CHIP_SERIAL_NUM);
 }
-static SYSDEV_CLASS_ATTR(chip_serial, 0444, chip_serial_show, NULL);
+static DEVICE_ATTR(chip_serial, 0444, chip_serial_show, NULL);
 
-static ssize_t chip_revision_show(struct sysdev_class *dev,
-				  struct sysdev_class_attribute *attr,
+static ssize_t chip_revision_show(struct device *dev,
+				  struct device_attribute *attr,
 				  char *page)
 {
 	return get_hv_confstr(page, HV_CONFSTR_CHIP_REV);
 }
-static SYSDEV_CLASS_ATTR(chip_revision, 0444, chip_revision_show, NULL);
+static DEVICE_ATTR(chip_revision, 0444, chip_revision_show, NULL);
 
 
-static ssize_t type_show(struct sysdev_class *dev,
-			    struct sysdev_class_attribute *attr,
+static ssize_t type_show(struct device *dev,
+			    struct device_attribute *attr,
 			    char *page)
 {
 	return sprintf(page, "tilera\n");
 }
-static SYSDEV_CLASS_ATTR(type, 0444, type_show, NULL);
+static DEVICE_ATTR(type, 0444, type_show, NULL);
 
 #define HV_CONF_ATTR(name, conf)					\
-	static ssize_t name ## _show(struct sysdev_class *dev,		\
-				     struct sysdev_class_attribute *attr, \
+	static ssize_t name ## _show(struct device *dev,		\
+				     struct device_attribute *attr, \
 				     char *page)			\
 	{								\
 		return get_hv_confstr(page, conf);			\
 	}								\
-	static SYSDEV_CLASS_ATTR(name, 0444, name ## _show, NULL);
+	static DEVICE_ATTR(name, 0444, name ## _show, NULL);
 
 HV_CONF_ATTR(version,		HV_CONFSTR_HV_SW_VER)
 HV_CONF_ATTR(config_version,	HV_CONFSTR_HV_CONFIG_VER)
@@ -95,15 +96,15 @@ HV_CONF_ATTR(mezz_description,	HV_CONFSTR_MEZZ_DESC)
 HV_CONF_ATTR(switch_control,	HV_CONFSTR_SWITCH_CONTROL)
 
 static struct attribute *board_attrs[] = {
-	&attr_board_part.attr,
-	&attr_board_serial.attr,
-	&attr_board_revision.attr,
-	&attr_board_description.attr,
-	&attr_mezz_part.attr,
-	&attr_mezz_serial.attr,
-	&attr_mezz_revision.attr,
-	&attr_mezz_description.attr,
-	&attr_switch_control.attr,
+	&dev_attr_board_part.attr,
+	&dev_attr_board_serial.attr,
+	&dev_attr_board_revision.attr,
+	&dev_attr_board_description.attr,
+	&dev_attr_mezz_part.attr,
+	&dev_attr_mezz_serial.attr,
+	&dev_attr_mezz_revision.attr,
+	&dev_attr_mezz_description.attr,
+	&dev_attr_switch_control.attr,
 	NULL
 };
 
@@ -150,12 +151,11 @@ hvconfig_bin_read(struct file *filp, struct kobject *kobj,
 
 static int __init create_sysfs_entries(void)
 {
-	struct sysdev_class *cls = &cpu_sysdev_class;
 	int err = 0;
 
 #define create_cpu_attr(name)						\
 	if (!err)							\
-		err = sysfs_create_file(&cls->kset.kobj, &attr_##name.attr);
+		err = device_create_file(cpu_subsys.dev_root, &dev_attr_##name);
 	create_cpu_attr(chip_width);
 	create_cpu_attr(chip_height);
 	create_cpu_attr(chip_serial);
@@ -163,7 +163,7 @@ static int __init create_sysfs_entries(void)
 
 #define create_hv_attr(name)						\
 	if (!err)							\
-		err = sysfs_create_file(hypervisor_kobj, &attr_##name.attr);
+		err = sysfs_create_file(hypervisor_kobj, &dev_attr_##name);
 	create_hv_attr(type);
 	create_hv_attr(version);
 	create_hv_attr(config_version);
diff --git a/arch/tile/lib/exports.c b/arch/tile/lib/exports.c
index a87d2a8..2a81d32 100644
--- a/arch/tile/lib/exports.c
+++ b/arch/tile/lib/exports.c
@@ -39,6 +39,9 @@ EXPORT_SYMBOL(finv_user_asm);
 EXPORT_SYMBOL(current_text_addr);
 EXPORT_SYMBOL(dump_stack);
 
+/* arch/tile/kernel/head.S */
+EXPORT_SYMBOL(empty_zero_page);
+
 /* arch/tile/lib/, various memcpy files */
 EXPORT_SYMBOL(memcpy);
 EXPORT_SYMBOL(__copy_to_user_inatomic);
diff --git a/arch/tile/mm/fault.c b/arch/tile/mm/fault.c
index 25b7b90..c1eaaa1 100644
--- a/arch/tile/mm/fault.c
+++ b/arch/tile/mm/fault.c
@@ -54,7 +54,7 @@ static noinline void force_sig_info_fault(const char *type, int si_signo,
 	if (unlikely(tsk->pid < 2)) {
 		panic("Signal %d (code %d) at %#lx sent to %s!",
 		      si_signo, si_code & 0xffff, address,
-		      tsk->pid ? "init" : "the idle task");
+		      is_idle_task(tsk) ? "the idle task" : "init");
 	}
 
 	info.si_signo = si_signo;
@@ -515,7 +515,7 @@ no_context:
 
 	if (unlikely(tsk->pid < 2)) {
 		panic("Kernel page fault running %s!",
-		      tsk->pid ? "init" : "the idle task");
+		      is_idle_task(tsk) ? "the idle task" : "init");
 	}
 
 	/*
diff --git a/arch/tile/mm/homecache.c b/arch/tile/mm/homecache.c
index cbe6f4f..1cc6ae4 100644
--- a/arch/tile/mm/homecache.c
+++ b/arch/tile/mm/homecache.c
@@ -449,9 +449,12 @@ void homecache_free_pages(unsigned long addr, unsigned int order)
 	VM_BUG_ON(!virt_addr_valid((void *)addr));
 	page = virt_to_page((void *)addr);
 	if (put_page_testzero(page)) {
-		int pages = (1 << order);
 		homecache_change_page_home(page, order, initial_page_home());
-		while (pages--)
-			__free_page(page++);
+		if (order == 0) {
+			free_hot_cold_page(page, 0);
+		} else {
+			init_page_count(page);
+			__free_pages(page, order);
+		}
 	}
 }
diff --git a/arch/um/include/asm/thread_info.h b/arch/um/include/asm/thread_info.h
index 5bd1bad..200c4ab 100644
--- a/arch/um/include/asm/thread_info.h
+++ b/arch/um/include/asm/thread_info.h
@@ -71,7 +71,6 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_MEMDIE		5	/* is terminating due to OOM killer */
 #define TIF_SYSCALL_AUDIT	6
 #define TIF_RESTORE_SIGMASK	7
-#define TIF_FREEZE		16	/* is freezing for suspend */
 
 #define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
@@ -80,6 +79,5 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_MEMDIE		(1 << TIF_MEMDIE)
 #define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
 #define _TIF_RESTORE_SIGMASK	(1 << TIF_RESTORE_SIGMASK)
-#define _TIF_FREEZE		(1 << TIF_FREEZE)
 
 #endif
diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c
index c533835..69f2490 100644
--- a/arch/um/kernel/process.c
+++ b/arch/um/kernel/process.c
@@ -246,10 +246,12 @@ void default_idle(void)
 		if (need_resched())
 			schedule();
 
-		tick_nohz_stop_sched_tick(1);
+		tick_nohz_idle_enter();
+		rcu_idle_enter();
 		nsecs = disable_timer();
 		idle_sleep(nsecs);
-		tick_nohz_restart_sched_tick();
+		rcu_idle_exit();
+		tick_nohz_idle_exit();
 	}
 }
 
diff --git a/arch/um/kernel/time.c b/arch/um/kernel/time.c
index a08d9fa..82a6e22 100644
--- a/arch/um/kernel/time.c
+++ b/arch/um/kernel/time.c
@@ -75,8 +75,6 @@ static struct clocksource itimer_clocksource = {
 	.rating		= 300,
 	.read		= itimer_read,
 	.mask		= CLOCKSOURCE_MASK(64),
-	.mult		= 1000,
-	.shift		= 0,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
@@ -94,9 +92,9 @@ static void __init setup_itimer(void)
 		clockevent_delta2ns(60 * HZ, &itimer_clockevent);
 	itimer_clockevent.min_delta_ns =
 		clockevent_delta2ns(1, &itimer_clockevent);
-	err = clocksource_register(&itimer_clocksource);
+	err = clocksource_register_hz(&itimer_clocksource, USEC_PER_SEC);
 	if (err) {
-		printk(KERN_ERR "clocksource_register returned %d\n", err);
+		printk(KERN_ERR "clocksource_register_hz returned %d\n", err);
 		return;
 	}
 	clockevents_register_device(&itimer_clockevent);
diff --git a/arch/unicore32/include/asm/thread_info.h b/arch/unicore32/include/asm/thread_info.h
index c270e9e..89f7557 100644
--- a/arch/unicore32/include/asm/thread_info.h
+++ b/arch/unicore32/include/asm/thread_info.h
@@ -135,14 +135,12 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_NOTIFY_RESUME	2	/* callback before returning to user */
 #define TIF_SYSCALL_TRACE	8
 #define TIF_MEMDIE		18
-#define TIF_FREEZE		19
 #define TIF_RESTORE_SIGMASK	20
 
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
 #define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
 #define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
-#define _TIF_FREEZE		(1 << TIF_FREEZE)
 #define _TIF_RESTORE_SIGMASK	(1 << TIF_RESTORE_SIGMASK)
 
 /*
diff --git a/arch/unicore32/kernel/process.c b/arch/unicore32/kernel/process.c
index ba401df..52edc2b 100644
--- a/arch/unicore32/kernel/process.c
+++ b/arch/unicore32/kernel/process.c
@@ -55,7 +55,8 @@ void cpu_idle(void)
 {
 	/* endless idle loop with no priority at all */
 	while (1) {
-		tick_nohz_stop_sched_tick(1);
+		tick_nohz_idle_enter();
+		rcu_idle_enter();
 		while (!need_resched()) {
 			local_irq_disable();
 			stop_critical_timings();
@@ -63,7 +64,8 @@ void cpu_idle(void)
 			local_irq_enable();
 			start_critical_timings();
 		}
-		tick_nohz_restart_sched_tick();
+		rcu_idle_exit();
+		tick_nohz_idle_exit();
 		preempt_enable_no_resched();
 		schedule();
 		preempt_disable();
diff --git a/arch/unicore32/kernel/puv3-core.c b/arch/unicore32/kernel/puv3-core.c
index 1a505a7..254adee 100644
--- a/arch/unicore32/kernel/puv3-core.c
+++ b/arch/unicore32/kernel/puv3-core.c
@@ -13,7 +13,6 @@
 
 #include <linux/init.h>
 #include <linux/device.h>
-#include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
diff --git a/arch/unicore32/kernel/puv3-nb0916.c b/arch/unicore32/kernel/puv3-nb0916.c
index e731c56..37b12a0 100644
--- a/arch/unicore32/kernel/puv3-nb0916.c
+++ b/arch/unicore32/kernel/puv3-nb0916.c
@@ -13,7 +13,6 @@
 
 #include <linux/init.h>
 #include <linux/device.h>
-#include <linux/sysdev.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 #include <linux/io.h>
diff --git a/arch/unicore32/kernel/setup.c b/arch/unicore32/kernel/setup.c
index 471b6bc..673d7a8 100644
--- a/arch/unicore32/kernel/setup.c
+++ b/arch/unicore32/kernel/setup.c
@@ -37,6 +37,7 @@
 #include <asm/cacheflush.h>
 #include <asm/tlbflush.h>
 #include <asm/traps.h>
+#include <asm/memblock.h>
 
 #include "setup.h"
 
diff --git a/arch/unicore32/mm/init.c b/arch/unicore32/mm/init.c
index 3b379cd..de186bd 100644
--- a/arch/unicore32/mm/init.c
+++ b/arch/unicore32/mm/init.c
@@ -26,6 +26,7 @@
 #include <asm/setup.h>
 #include <asm/sizes.h>
 #include <asm/tlb.h>
+#include <asm/memblock.h>
 #include <mach/map.h>
 
 #include "mm.h"
@@ -245,7 +246,6 @@ void __init uc32_memblock_init(struct meminfo *mi)
 	sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]),
 		meminfo_cmp, NULL);
 
-	memblock_init();
 	for (i = 0; i < mi->nr_banks; i++)
 		memblock_add(mi->bank[i].start, mi->bank[i].size);
 
@@ -264,7 +264,7 @@ void __init uc32_memblock_init(struct meminfo *mi)
 
 	uc32_mm_memblock_reserve();
 
-	memblock_analyze();
+	memblock_allow_resize();
 	memblock_dump_all();
 }
 
diff --git a/arch/unicore32/mm/mmu.c b/arch/unicore32/mm/mmu.c
index 3e5c3e5..43c20b4 100644
--- a/arch/unicore32/mm/mmu.c
+++ b/arch/unicore32/mm/mmu.c
@@ -25,6 +25,7 @@
 #include <asm/setup.h>
 #include <asm/sizes.h>
 #include <asm/tlb.h>
+#include <asm/memblock.h>
 
 #include <mach/map.h>
 
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index cb9a104..1d2a69d 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -26,6 +26,8 @@ config X86
 	select HAVE_IOREMAP_PROT
 	select HAVE_KPROBES
 	select HAVE_MEMBLOCK
+	select HAVE_MEMBLOCK_NODE_MAP
+	select ARCH_DISCARD_MEMBLOCK
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARCH_WANT_FRAME_POINTERS
 	select HAVE_DMA_ATTRS
@@ -204,9 +206,6 @@ config ZONE_DMA32
 	bool
 	default X86_64
 
-config ARCH_POPULATES_NODE_MAP
-	def_bool y
-
 config AUDIT_ARCH
 	bool
 	default X86_64
@@ -343,6 +342,7 @@ config X86_EXTENDED_PLATFORM
 
 	  If you enable this option then you'll be able to select support
 	  for the following (non-PC) 64 bit x86 platforms:
+		Numascale NumaChip
 		ScaleMP vSMP
 		SGI Ultraviolet
 
@@ -351,6 +351,18 @@ config X86_EXTENDED_PLATFORM
 endif
 # This is an alphabetically sorted list of 64 bit extended platforms
 # Please maintain the alphabetic order if and when there are additions
+config X86_NUMACHIP
+	bool "Numascale NumaChip"
+	depends on X86_64
+	depends on X86_EXTENDED_PLATFORM
+	depends on NUMA
+	depends on SMP
+	depends on X86_X2APIC
+	depends on !EDAC_AMD64
+	---help---
+	  Adds support for Numascale NumaChip large-SMP systems. Needed to
+	  enable more than ~168 cores.
+	  If you don't have one of these, you should say N here.
 
 config X86_VSMP
 	bool "ScaleMP vSMP"
@@ -390,7 +402,7 @@ config X86_INTEL_CE
 	  This option compiles in support for the CE4100 SOC for settop
 	  boxes and media devices.
 
-config X86_INTEL_MID
+config X86_WANT_INTEL_MID
 	bool "Intel MID platform support"
 	depends on X86_32
 	depends on X86_EXTENDED_PLATFORM
@@ -399,7 +411,10 @@ config X86_INTEL_MID
 	  systems which do not have the PCI legacy interfaces (Moorestown,
 	  Medfield). If you are building for a PC class system say N here.
 
-if X86_INTEL_MID
+if X86_WANT_INTEL_MID
+
+config X86_INTEL_MID
+	bool
 
 config X86_MRST
        bool "Moorestown MID platform"
@@ -411,6 +426,7 @@ config X86_MRST
 	select SPI
 	select INTEL_SCU_IPC
 	select X86_PLATFORM_DEVICES
+	select X86_INTEL_MID
 	---help---
 	  Moorestown is Intel's Low Power Intel Architecture (LPIA) based Moblin
 	  Internet Device(MID) platform. Moorestown consists of two chips:
@@ -1726,7 +1742,7 @@ source "drivers/sfi/Kconfig"
 
 config X86_APM_BOOT
 	def_bool y
-	depends on APM || APM_MODULE
+	depends on APM
 
 menuconfig APM
 	tristate "APM (Advanced Power Management) BIOS support"
diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index a6253ec..3e27456 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -134,7 +134,7 @@ ENTRY(ia32_sysenter_target)
 	CFI_REL_OFFSET rsp,0
 	pushfq_cfi
 	/*CFI_REL_OFFSET rflags,0*/
-	movl	8*3-THREAD_SIZE+TI_sysenter_return(%rsp), %r10d
+	movl	TI_sysenter_return+THREAD_INFO(%rsp,3*8-KERNEL_STACK_OFFSET),%r10d
 	CFI_REGISTER rip,r10
 	pushq_cfi $__USER32_CS
 	/*CFI_REL_OFFSET cs,0*/
@@ -150,9 +150,8 @@ ENTRY(ia32_sysenter_target)
  	.section __ex_table,"a"
  	.quad 1b,ia32_badarg
  	.previous	
-	GET_THREAD_INFO(%r10)
-	orl    $TS_COMPAT,TI_status(%r10)
-	testl  $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%r10)
+	orl     $TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET)
+	testl   $_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
 	CFI_REMEMBER_STATE
 	jnz  sysenter_tracesys
 	cmpq	$(IA32_NR_syscalls-1),%rax
@@ -162,13 +161,12 @@ sysenter_do_call:
 sysenter_dispatch:
 	call	*ia32_sys_call_table(,%rax,8)
 	movq	%rax,RAX-ARGOFFSET(%rsp)
-	GET_THREAD_INFO(%r10)
 	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
-	testl	$_TIF_ALLWORK_MASK,TI_flags(%r10)
+	testl	$_TIF_ALLWORK_MASK,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
 	jnz	sysexit_audit
 sysexit_from_sys_call:
-	andl    $~TS_COMPAT,TI_status(%r10)
+	andl    $~TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET)
 	/* clear IF, that popfq doesn't enable interrupts early */
 	andl  $~0x200,EFLAGS-R11(%rsp) 
 	movl	RIP-R11(%rsp),%edx		/* User %eip */
@@ -205,7 +203,7 @@ sysexit_from_sys_call:
 	.endm
 
 	.macro auditsys_exit exit
-	testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),TI_flags(%r10)
+	testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
 	jnz ia32_ret_from_sys_call
 	TRACE_IRQS_ON
 	sti
@@ -215,12 +213,11 @@ sysexit_from_sys_call:
 	movzbl %al,%edi		/* zero-extend that into %edi */
 	inc %edi /* first arg, 0->1(AUDITSC_SUCCESS), 1->2(AUDITSC_FAILURE) */
 	call audit_syscall_exit
-	GET_THREAD_INFO(%r10)
 	movl RAX-ARGOFFSET(%rsp),%eax	/* reload syscall return value */
 	movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi
 	cli
 	TRACE_IRQS_OFF
-	testl %edi,TI_flags(%r10)
+	testl %edi,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
 	jz \exit
 	CLEAR_RREGS -ARGOFFSET
 	jmp int_with_check
@@ -238,7 +235,7 @@ sysexit_audit:
 
 sysenter_tracesys:
 #ifdef CONFIG_AUDITSYSCALL
-	testl	$(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%r10)
+	testl	$(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
 	jz	sysenter_auditsys
 #endif
 	SAVE_REST
@@ -309,9 +306,8 @@ ENTRY(ia32_cstar_target)
 	.section __ex_table,"a"
 	.quad 1b,ia32_badarg
 	.previous	
-	GET_THREAD_INFO(%r10)
-	orl   $TS_COMPAT,TI_status(%r10)
-	testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%r10)
+	orl     $TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET)
+	testl   $_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
 	CFI_REMEMBER_STATE
 	jnz   cstar_tracesys
 	cmpq $IA32_NR_syscalls-1,%rax
@@ -321,13 +317,12 @@ cstar_do_call:
 cstar_dispatch:
 	call *ia32_sys_call_table(,%rax,8)
 	movq %rax,RAX-ARGOFFSET(%rsp)
-	GET_THREAD_INFO(%r10)
 	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
-	testl $_TIF_ALLWORK_MASK,TI_flags(%r10)
+	testl $_TIF_ALLWORK_MASK,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
 	jnz sysretl_audit
 sysretl_from_sys_call:
-	andl $~TS_COMPAT,TI_status(%r10)
+	andl $~TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET)
 	RESTORE_ARGS 0,-ARG_SKIP,0,0,0
 	movl RIP-ARGOFFSET(%rsp),%ecx
 	CFI_REGISTER rip,rcx
@@ -355,7 +350,7 @@ sysretl_audit:
 
 cstar_tracesys:
 #ifdef CONFIG_AUDITSYSCALL
-	testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%r10)
+	testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
 	jz cstar_auditsys
 #endif
 	xchgl %r9d,%ebp
@@ -420,9 +415,8 @@ ENTRY(ia32_syscall)
 	/* note the registers are not zero extended to the sf.
 	   this could be a problem. */
 	SAVE_ARGS 0,1,0
-	GET_THREAD_INFO(%r10)
-	orl   $TS_COMPAT,TI_status(%r10)
-	testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%r10)
+	orl $TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET)
+	testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
 	jnz ia32_tracesys
 	cmpq $(IA32_NR_syscalls-1),%rax
 	ja ia32_badsys
@@ -459,8 +453,8 @@ quiet_ni_syscall:
 	CFI_ENDPROC
 	
 	.macro PTREGSCALL label, func, arg
-	.globl \label
-\label:
+	ALIGN
+GLOBAL(\label)
 	leaq \func(%rip),%rax
 	leaq -ARGOFFSET+8(%rsp),\arg	/* 8 for return address */
 	jmp  ia32_ptregs_common	
@@ -477,7 +471,8 @@ quiet_ni_syscall:
 	PTREGSCALL stub32_vfork, sys_vfork, %rdi
 	PTREGSCALL stub32_iopl, sys_iopl, %rsi
 
-ENTRY(ia32_ptregs_common)
+	ALIGN
+ia32_ptregs_common:
 	popq %r11
 	CFI_ENDPROC
 	CFI_STARTPROC32	simple
diff --git a/arch/x86/include/asm/alternative-asm.h b/arch/x86/include/asm/alternative-asm.h
index 091508b..952bd01 100644
--- a/arch/x86/include/asm/alternative-asm.h
+++ b/arch/x86/include/asm/alternative-asm.h
@@ -4,10 +4,10 @@
 
 #ifdef CONFIG_SMP
 	.macro LOCK_PREFIX
-1:	lock
+672:	lock
 	.section .smp_locks,"a"
 	.balign 4
-	.long 1b - .
+	.long 672b - .
 	.previous
 	.endm
 #else
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 1a6c09a..3ab9bdd 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -176,6 +176,7 @@ static inline u64 native_x2apic_icr_read(void)
 }
 
 extern int x2apic_phys;
+extern int x2apic_preenabled;
 extern void check_x2apic(void);
 extern void enable_x2apic(void);
 extern void x2apic_icr_write(u32 low, u32 id);
@@ -198,6 +199,9 @@ static inline void x2apic_force_phys(void)
 	x2apic_phys = 1;
 }
 #else
+static inline void disable_x2apic(void)
+{
+}
 static inline void check_x2apic(void)
 {
 }
@@ -212,6 +216,7 @@ static inline void x2apic_force_phys(void)
 {
 }
 
+#define	nox2apic	0
 #define	x2apic_preenabled 0
 #define	x2apic_supported()	0
 #endif
@@ -410,6 +415,7 @@ extern int wakeup_secondary_cpu_via_nmi(int apicid, unsigned long start_eip);
 #endif
 
 #ifdef CONFIG_X86_LOCAL_APIC
+
 static inline u32 apic_read(u32 reg)
 {
 	return apic->read(reg);
diff --git a/arch/x86/include/asm/apic_flat_64.h b/arch/x86/include/asm/apic_flat_64.h
new file mode 100644
index 0000000..a2d3127
--- /dev/null
+++ b/arch/x86/include/asm/apic_flat_64.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_X86_APIC_FLAT_64_H
+#define _ASM_X86_APIC_FLAT_64_H
+
+extern void flat_init_apic_ldr(void);
+
+#endif
+
diff --git a/arch/x86/include/asm/apicdef.h b/arch/x86/include/asm/apicdef.h
index 3925d80..134bba0 100644
--- a/arch/x86/include/asm/apicdef.h
+++ b/arch/x86/include/asm/apicdef.h
@@ -144,6 +144,7 @@
 
 #define APIC_BASE (fix_to_virt(FIX_APIC_BASE))
 #define APIC_BASE_MSR	0x800
+#define XAPIC_ENABLE	(1UL << 11)
 #define X2APIC_ENABLE	(1UL << 10)
 
 #ifdef CONFIG_X86_32
diff --git a/arch/x86/include/asm/bitops.h b/arch/x86/include/asm/bitops.h
index 1775d6e..b97596e 100644
--- a/arch/x86/include/asm/bitops.h
+++ b/arch/x86/include/asm/bitops.h
@@ -380,6 +380,8 @@ static inline unsigned long __fls(unsigned long word)
 	return word;
 }
 
+#undef ADDR
+
 #ifdef __KERNEL__
 /**
  * ffs - find first set bit in word
@@ -395,10 +397,25 @@ static inline unsigned long __fls(unsigned long word)
 static inline int ffs(int x)
 {
 	int r;
-#ifdef CONFIG_X86_CMOV
+
+#ifdef CONFIG_X86_64
+	/*
+	 * AMD64 says BSFL won't clobber the dest reg if x==0; Intel64 says the
+	 * dest reg is undefined if x==0, but their CPU architect says its
+	 * value is written to set it to the same as before, except that the
+	 * top 32 bits will be cleared.
+	 *
+	 * We cannot do this on 32 bits because at the very least some
+	 * 486 CPUs did not behave this way.
+	 */
+	long tmp = -1;
+	asm("bsfl %1,%0"
+	    : "=r" (r)
+	    : "rm" (x), "0" (tmp));
+#elif defined(CONFIG_X86_CMOV)
 	asm("bsfl %1,%0\n\t"
 	    "cmovzl %2,%0"
-	    : "=r" (r) : "rm" (x), "r" (-1));
+	    : "=&r" (r) : "rm" (x), "r" (-1));
 #else
 	asm("bsfl %1,%0\n\t"
 	    "jnz 1f\n\t"
@@ -422,7 +439,22 @@ static inline int ffs(int x)
 static inline int fls(int x)
 {
 	int r;
-#ifdef CONFIG_X86_CMOV
+
+#ifdef CONFIG_X86_64
+	/*
+	 * AMD64 says BSRL won't clobber the dest reg if x==0; Intel64 says the
+	 * dest reg is undefined if x==0, but their CPU architect says its
+	 * value is written to set it to the same as before, except that the
+	 * top 32 bits will be cleared.
+	 *
+	 * We cannot do this on 32 bits because at the very least some
+	 * 486 CPUs did not behave this way.
+	 */
+	long tmp = -1;
+	asm("bsrl %1,%0"
+	    : "=r" (r)
+	    : "rm" (x), "0" (tmp));
+#elif defined(CONFIG_X86_CMOV)
 	asm("bsrl %1,%0\n\t"
 	    "cmovzl %2,%0"
 	    : "=&r" (r) : "rm" (x), "rm" (-1));
@@ -434,11 +466,35 @@ static inline int fls(int x)
 #endif
 	return r + 1;
 }
-#endif /* __KERNEL__ */
-
-#undef ADDR
 
-#ifdef __KERNEL__
+/**
+ * fls64 - find last set bit in a 64-bit word
+ * @x: the word to search
+ *
+ * This is defined in a similar way as the libc and compiler builtin
+ * ffsll, but returns the position of the most significant set bit.
+ *
+ * fls64(value) returns 0 if value is 0 or the position of the last
+ * set bit if value is nonzero. The last (most significant) bit is
+ * at position 64.
+ */
+#ifdef CONFIG_X86_64
+static __always_inline int fls64(__u64 x)
+{
+	long bitpos = -1;
+	/*
+	 * AMD64 says BSRQ won't clobber the dest reg if x==0; Intel64 says the
+	 * dest reg is undefined if x==0, but their CPU architect says its
+	 * value is written to set it to the same as before.
+	 */
+	asm("bsrq %1,%0"
+	    : "+r" (bitpos)
+	    : "rm" (x));
+	return bitpos + 1;
+}
+#else
+#include <asm-generic/bitops/fls64.h>
+#endif
 
 #include <asm-generic/bitops/find.h>
 
@@ -450,12 +506,6 @@ static inline int fls(int x)
 
 #include <asm-generic/bitops/const_hweight.h>
 
-#endif /* __KERNEL__ */
-
-#include <asm-generic/bitops/fls64.h>
-
-#ifdef __KERNEL__
-
 #include <asm-generic/bitops/le.h>
 
 #include <asm-generic/bitops/ext2-atomic-setbit.h>
diff --git a/arch/x86/include/asm/cmpxchg.h b/arch/x86/include/asm/cmpxchg.h
index 5d3acdf..0c9fa27 100644
--- a/arch/x86/include/asm/cmpxchg.h
+++ b/arch/x86/include/asm/cmpxchg.h
@@ -14,6 +14,8 @@ extern void __cmpxchg_wrong_size(void)
 	__compiletime_error("Bad argument size for cmpxchg");
 extern void __xadd_wrong_size(void)
 	__compiletime_error("Bad argument size for xadd");
+extern void __add_wrong_size(void)
+	__compiletime_error("Bad argument size for add");
 
 /*
  * Constants for operation sizes. On 32-bit, the 64-bit size it set to
@@ -31,60 +33,47 @@ extern void __xadd_wrong_size(void)
 #define	__X86_CASE_Q	-1		/* sizeof will never return -1 */
 #endif
 
+/* 
+ * An exchange-type operation, which takes a value and a pointer, and
+ * returns a the old value.
+ */
+#define __xchg_op(ptr, arg, op, lock)					\
+	({								\
+	        __typeof__ (*(ptr)) __ret = (arg);			\
+		switch (sizeof(*(ptr))) {				\
+		case __X86_CASE_B:					\
+			asm volatile (lock #op "b %b0, %1\n"		\
+				      : "+r" (__ret), "+m" (*(ptr))	\
+				      : : "memory", "cc");		\
+			break;						\
+		case __X86_CASE_W:					\
+			asm volatile (lock #op "w %w0, %1\n"		\
+				      : "+r" (__ret), "+m" (*(ptr))	\
+				      : : "memory", "cc");		\
+			break;						\
+		case __X86_CASE_L:					\
+			asm volatile (lock #op "l %0, %1\n"		\
+				      : "+r" (__ret), "+m" (*(ptr))	\
+				      : : "memory", "cc");		\
+			break;						\
+		case __X86_CASE_Q:					\
+			asm volatile (lock #op "q %q0, %1\n"		\
+				      : "+r" (__ret), "+m" (*(ptr))	\
+				      : : "memory", "cc");		\
+			break;						\
+		default:						\
+			__ ## op ## _wrong_size();			\
+		}							\
+		__ret;							\
+	})
+
 /*
  * Note: no "lock" prefix even on SMP: xchg always implies lock anyway.
  * Since this is generally used to protect other memory information, we
  * use "asm volatile" and "memory" clobbers to prevent gcc from moving
  * information around.
  */
-#define __xchg(x, ptr, size)						\
-({									\
-	__typeof(*(ptr)) __x = (x);					\
-	switch (size) {							\
-	case __X86_CASE_B:						\
-	{								\
-		volatile u8 *__ptr = (volatile u8 *)(ptr);		\
-		asm volatile("xchgb %0,%1"				\
-			     : "=q" (__x), "+m" (*__ptr)		\
-			     : "0" (__x)				\
-			     : "memory");				\
-		break;							\
-	}								\
-	case __X86_CASE_W:						\
-	{								\
-		volatile u16 *__ptr = (volatile u16 *)(ptr);		\
-		asm volatile("xchgw %0,%1"				\
-			     : "=r" (__x), "+m" (*__ptr)		\
-			     : "0" (__x)				\
-			     : "memory");				\
-		break;							\
-	}								\
-	case __X86_CASE_L:						\
-	{								\
-		volatile u32 *__ptr = (volatile u32 *)(ptr);		\
-		asm volatile("xchgl %0,%1"				\
-			     : "=r" (__x), "+m" (*__ptr)		\
-			     : "0" (__x)				\
-			     : "memory");				\
-		break;							\
-	}								\
-	case __X86_CASE_Q:						\
-	{								\
-		volatile u64 *__ptr = (volatile u64 *)(ptr);		\
-		asm volatile("xchgq %0,%1"				\
-			     : "=r" (__x), "+m" (*__ptr)		\
-			     : "0" (__x)				\
-			     : "memory");				\
-		break;							\
-	}								\
-	default:							\
-		__xchg_wrong_size();					\
-	}								\
-	__x;								\
-})
-
-#define xchg(ptr, v)							\
-	__xchg((v), (ptr), sizeof(*ptr))
+#define xchg(ptr, v)	__xchg_op((ptr), (v), xchg, "")
 
 /*
  * Atomic compare and exchange.  Compare OLD with MEM, if identical,
@@ -165,46 +154,80 @@ extern void __xadd_wrong_size(void)
 	__cmpxchg_local((ptr), (old), (new), sizeof(*ptr))
 #endif
 
-#define __xadd(ptr, inc, lock)						\
+/*
+ * xadd() adds "inc" to "*ptr" and atomically returns the previous
+ * value of "*ptr".
+ *
+ * xadd() is locked when multiple CPUs are online
+ * xadd_sync() is always locked
+ * xadd_local() is never locked
+ */
+#define __xadd(ptr, inc, lock)	__xchg_op((ptr), (inc), xadd, lock)
+#define xadd(ptr, inc)		__xadd((ptr), (inc), LOCK_PREFIX)
+#define xadd_sync(ptr, inc)	__xadd((ptr), (inc), "lock; ")
+#define xadd_local(ptr, inc)	__xadd((ptr), (inc), "")
+
+#define __add(ptr, inc, lock)						\
 	({								\
 	        __typeof__ (*(ptr)) __ret = (inc);			\
 		switch (sizeof(*(ptr))) {				\
 		case __X86_CASE_B:					\
-			asm volatile (lock "xaddb %b0, %1\n"		\
-				      : "+r" (__ret), "+m" (*(ptr))	\
-				      : : "memory", "cc");		\
+			asm volatile (lock "addb %b1, %0\n"		\
+				      : "+m" (*(ptr)) : "ri" (inc)	\
+				      : "memory", "cc");		\
 			break;						\
 		case __X86_CASE_W:					\
-			asm volatile (lock "xaddw %w0, %1\n"		\
-				      : "+r" (__ret), "+m" (*(ptr))	\
-				      : : "memory", "cc");		\
+			asm volatile (lock "addw %w1, %0\n"		\
+				      : "+m" (*(ptr)) : "ri" (inc)	\
+				      : "memory", "cc");		\
 			break;						\
 		case __X86_CASE_L:					\
-			asm volatile (lock "xaddl %0, %1\n"		\
-				      : "+r" (__ret), "+m" (*(ptr))	\
-				      : : "memory", "cc");		\
+			asm volatile (lock "addl %1, %0\n"		\
+				      : "+m" (*(ptr)) : "ri" (inc)	\
+				      : "memory", "cc");		\
 			break;						\
 		case __X86_CASE_Q:					\
-			asm volatile (lock "xaddq %q0, %1\n"		\
-				      : "+r" (__ret), "+m" (*(ptr))	\
-				      : : "memory", "cc");		\
+			asm volatile (lock "addq %1, %0\n"		\
+				      : "+m" (*(ptr)) : "ri" (inc)	\
+				      : "memory", "cc");		\
 			break;						\
 		default:						\
-			__xadd_wrong_size();				\
+			__add_wrong_size();				\
 		}							\
 		__ret;							\
 	})
 
 /*
- * xadd() adds "inc" to "*ptr" and atomically returns the previous
- * value of "*ptr".
+ * add_*() adds "inc" to "*ptr"
  *
- * xadd() is locked when multiple CPUs are online
- * xadd_sync() is always locked
- * xadd_local() is never locked
+ * __add() takes a lock prefix
+ * add_smp() is locked when multiple CPUs are online
+ * add_sync() is always locked
  */
-#define xadd(ptr, inc)		__xadd((ptr), (inc), LOCK_PREFIX)
-#define xadd_sync(ptr, inc)	__xadd((ptr), (inc), "lock; ")
-#define xadd_local(ptr, inc)	__xadd((ptr), (inc), "")
+#define add_smp(ptr, inc)	__add((ptr), (inc), LOCK_PREFIX)
+#define add_sync(ptr, inc)	__add((ptr), (inc), "lock; ")
+
+#define __cmpxchg_double(pfx, p1, p2, o1, o2, n1, n2)			\
+({									\
+	bool __ret;							\
+	__typeof__(*(p1)) __old1 = (o1), __new1 = (n1);			\
+	__typeof__(*(p2)) __old2 = (o2), __new2 = (n2);			\
+	BUILD_BUG_ON(sizeof(*(p1)) != sizeof(long));			\
+	BUILD_BUG_ON(sizeof(*(p2)) != sizeof(long));			\
+	VM_BUG_ON((unsigned long)(p1) % (2 * sizeof(long)));		\
+	VM_BUG_ON((unsigned long)((p1) + 1) != (unsigned long)(p2));	\
+	asm volatile(pfx "cmpxchg%c4b %2; sete %0"			\
+		     : "=a" (__ret), "+d" (__old2),			\
+		       "+m" (*(p1)), "+m" (*(p2))			\
+		     : "i" (2 * sizeof(long)), "a" (__old1),		\
+		       "b" (__new1), "c" (__new2));			\
+	__ret;								\
+})
+
+#define cmpxchg_double(p1, p2, o1, o2, n1, n2) \
+	__cmpxchg_double(LOCK_PREFIX, p1, p2, o1, o2, n1, n2)
+
+#define cmpxchg_double_local(p1, p2, o1, o2, n1, n2) \
+	__cmpxchg_double(, p1, p2, o1, o2, n1, n2)
 
 #endif	/* ASM_X86_CMPXCHG_H */
diff --git a/arch/x86/include/asm/cmpxchg_32.h b/arch/x86/include/asm/cmpxchg_32.h
index fbebb07..53f4b21 100644
--- a/arch/x86/include/asm/cmpxchg_32.h
+++ b/arch/x86/include/asm/cmpxchg_32.h
@@ -166,52 +166,6 @@ static inline unsigned long cmpxchg_386(volatile void *ptr, unsigned long old,
 
 #endif
 
-#define cmpxchg8b(ptr, o1, o2, n1, n2)				\
-({								\
-	char __ret;						\
-	__typeof__(o2) __dummy;					\
-	__typeof__(*(ptr)) __old1 = (o1);			\
-	__typeof__(o2) __old2 = (o2);				\
-	__typeof__(*(ptr)) __new1 = (n1);			\
-	__typeof__(o2) __new2 = (n2);				\
-	asm volatile(LOCK_PREFIX "cmpxchg8b %2; setz %1"	\
-		       : "=d"(__dummy), "=a" (__ret), "+m" (*ptr)\
-		       : "a" (__old1), "d"(__old2),		\
-		         "b" (__new1), "c" (__new2)		\
-		       : "memory");				\
-	__ret; })
-
-
-#define cmpxchg8b_local(ptr, o1, o2, n1, n2)			\
-({								\
-	char __ret;						\
-	__typeof__(o2) __dummy;					\
-	__typeof__(*(ptr)) __old1 = (o1);			\
-	__typeof__(o2) __old2 = (o2);				\
-	__typeof__(*(ptr)) __new1 = (n1);			\
-	__typeof__(o2) __new2 = (n2);				\
-	asm volatile("cmpxchg8b %2; setz %1"			\
-		       : "=d"(__dummy), "=a"(__ret), "+m" (*ptr)\
-		       : "a" (__old), "d"(__old2),		\
-		         "b" (__new1), "c" (__new2),		\
-		       : "memory");				\
-	__ret; })
-
-
-#define cmpxchg_double(ptr, o1, o2, n1, n2)				\
-({									\
-	BUILD_BUG_ON(sizeof(*(ptr)) != 4);				\
-	VM_BUG_ON((unsigned long)(ptr) % 8);				\
-	cmpxchg8b((ptr), (o1), (o2), (n1), (n2));			\
-})
-
-#define cmpxchg_double_local(ptr, o1, o2, n1, n2)			\
-({									\
-       BUILD_BUG_ON(sizeof(*(ptr)) != 4);				\
-       VM_BUG_ON((unsigned long)(ptr) % 8);				\
-       cmpxchg16b_local((ptr), (o1), (o2), (n1), (n2));			\
-})
-
 #define system_has_cmpxchg_double() cpu_has_cx8
 
 #endif /* _ASM_X86_CMPXCHG_32_H */
diff --git a/arch/x86/include/asm/cmpxchg_64.h b/arch/x86/include/asm/cmpxchg_64.h
index 285da02..614be87 100644
--- a/arch/x86/include/asm/cmpxchg_64.h
+++ b/arch/x86/include/asm/cmpxchg_64.h
@@ -20,49 +20,6 @@ static inline void set_64bit(volatile u64 *ptr, u64 val)
 	cmpxchg_local((ptr), (o), (n));					\
 })
 
-#define cmpxchg16b(ptr, o1, o2, n1, n2)				\
-({								\
-	char __ret;						\
-	__typeof__(o2) __junk;					\
-	__typeof__(*(ptr)) __old1 = (o1);			\
-	__typeof__(o2) __old2 = (o2);				\
-	__typeof__(*(ptr)) __new1 = (n1);			\
-	__typeof__(o2) __new2 = (n2);				\
-	asm volatile(LOCK_PREFIX "cmpxchg16b %2;setz %1"	\
-		       : "=d"(__junk), "=a"(__ret), "+m" (*ptr)	\
-		       : "b"(__new1), "c"(__new2),		\
-		         "a"(__old1), "d"(__old2));		\
-	__ret; })
-
-
-#define cmpxchg16b_local(ptr, o1, o2, n1, n2)			\
-({								\
-	char __ret;						\
-	__typeof__(o2) __junk;					\
-	__typeof__(*(ptr)) __old1 = (o1);			\
-	__typeof__(o2) __old2 = (o2);				\
-	__typeof__(*(ptr)) __new1 = (n1);			\
-	__typeof__(o2) __new2 = (n2);				\
-	asm volatile("cmpxchg16b %2;setz %1"			\
-		       : "=d"(__junk), "=a"(__ret), "+m" (*ptr)	\
-		       : "b"(__new1), "c"(__new2),		\
-		         "a"(__old1), "d"(__old2));		\
-	__ret; })
-
-#define cmpxchg_double(ptr, o1, o2, n1, n2)				\
-({									\
-	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
-	VM_BUG_ON((unsigned long)(ptr) % 16);				\
-	cmpxchg16b((ptr), (o1), (o2), (n1), (n2));			\
-})
-
-#define cmpxchg_double_local(ptr, o1, o2, n1, n2)			\
-({									\
-	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
-	VM_BUG_ON((unsigned long)(ptr) % 16);				\
-	cmpxchg16b_local((ptr), (o1), (o2), (n1), (n2));		\
-})
-
 #define system_has_cmpxchg_double() cpu_has_cx16
 
 #endif /* _ASM_X86_CMPXCHG_64_H */
diff --git a/arch/x86/include/asm/div64.h b/arch/x86/include/asm/div64.h
index 9a2d644..ced283a 100644
--- a/arch/x86/include/asm/div64.h
+++ b/arch/x86/include/asm/div64.h
@@ -4,6 +4,7 @@
 #ifdef CONFIG_X86_32
 
 #include <linux/types.h>
+#include <linux/log2.h>
 
 /*
  * do_div() is NOT a C function. It wants to return
@@ -21,15 +22,20 @@
 ({								\
 	unsigned long __upper, __low, __high, __mod, __base;	\
 	__base = (base);					\
-	asm("":"=a" (__low), "=d" (__high) : "A" (n));		\
-	__upper = __high;					\
-	if (__high) {						\
-		__upper = __high % (__base);			\
-		__high = __high / (__base);			\
+	if (__builtin_constant_p(__base) && is_power_of_2(__base)) { \
+		__mod = n & (__base - 1);			\
+		n >>= ilog2(__base);				\
+	} else {						\
+		asm("" : "=a" (__low), "=d" (__high) : "A" (n));\
+		__upper = __high;				\
+		if (__high) {					\
+			__upper = __high % (__base);		\
+			__high = __high / (__base);		\
+		}						\
+		asm("divl %2" : "=a" (__low), "=d" (__mod)	\
+			: "rm" (__base), "0" (__low), "1" (__upper));	\
+		asm("" : "=A" (n) : "a" (__low), "d" (__high));	\
 	}							\
-	asm("divl %2":"=a" (__low), "=d" (__mod)		\
-	    : "rm" (__base), "0" (__low), "1" (__upper));	\
-	asm("":"=A" (n) : "a" (__low), "d" (__high));		\
 	__mod;							\
 })
 
diff --git a/arch/x86/include/asm/e820.h b/arch/x86/include/asm/e820.h
index 908b969..3778256 100644
--- a/arch/x86/include/asm/e820.h
+++ b/arch/x86/include/asm/e820.h
@@ -117,7 +117,7 @@ static inline void early_memtest(unsigned long start, unsigned long end)
 
 extern unsigned long e820_end_of_ram_pfn(void);
 extern unsigned long e820_end_of_low_ram_pfn(void);
-extern u64 early_reserve_e820(u64 startt, u64 sizet, u64 align);
+extern u64 early_reserve_e820(u64 sizet, u64 align);
 
 void memblock_x86_fill(void);
 void memblock_find_dma_reserve(void);
diff --git a/arch/x86/include/asm/hardirq.h b/arch/x86/include/asm/hardirq.h
index 55e4de6..da0b3ca 100644
--- a/arch/x86/include/asm/hardirq.h
+++ b/arch/x86/include/asm/hardirq.h
@@ -11,6 +11,7 @@ typedef struct {
 #ifdef CONFIG_X86_LOCAL_APIC
 	unsigned int apic_timer_irqs;	/* arch dependent */
 	unsigned int irq_spurious_count;
+	unsigned int icr_read_retry_count;
 #endif
 	unsigned int x86_platform_ipis;	/* arch dependent */
 	unsigned int apic_perf_irqs;
diff --git a/arch/x86/include/asm/i387.h b/arch/x86/include/asm/i387.h
index c9e09ea..6919e93 100644
--- a/arch/x86/include/asm/i387.h
+++ b/arch/x86/include/asm/i387.h
@@ -218,7 +218,7 @@ static inline void fpu_fxsave(struct fpu *fpu)
 #ifdef CONFIG_SMP
 #define safe_address (__per_cpu_offset[0])
 #else
-#define safe_address (kstat_cpu(0).cpustat.user)
+#define safe_address (__get_cpu_var(kernel_cpustat).cpustat[CPUTIME_USER])
 #endif
 
 /*
diff --git a/arch/x86/include/asm/insn.h b/arch/x86/include/asm/insn.h
index 88c765e..74df3f1 100644
--- a/arch/x86/include/asm/insn.h
+++ b/arch/x86/include/asm/insn.h
@@ -137,6 +137,13 @@ static inline int insn_is_avx(struct insn *insn)
 	return (insn->vex_prefix.value != 0);
 }
 
+/* Ensure this instruction is decoded completely */
+static inline int insn_complete(struct insn *insn)
+{
+	return insn->opcode.got && insn->modrm.got && insn->sib.got &&
+		insn->displacement.got && insn->immediate.got;
+}
+
 static inline insn_byte_t insn_vex_m_bits(struct insn *insn)
 {
 	if (insn->vex_prefix.nbytes == 2)	/* 2 bytes VEX */
diff --git a/arch/x86/include/asm/intel_scu_ipc.h b/arch/x86/include/asm/intel_scu_ipc.h
index 4420993..925b605 100644
--- a/arch/x86/include/asm/intel_scu_ipc.h
+++ b/arch/x86/include/asm/intel_scu_ipc.h
@@ -3,11 +3,15 @@
 
 #include <linux/notifier.h>
 
-#define IPCMSG_VRTC	0xFA	 /* Set vRTC device */
-
-/* Command id associated with message IPCMSG_VRTC */
-#define IPC_CMD_VRTC_SETTIME      1 /* Set time */
-#define IPC_CMD_VRTC_SETALARM     2 /* Set alarm */
+#define IPCMSG_WARM_RESET	0xF0
+#define IPCMSG_COLD_RESET	0xF1
+#define IPCMSG_SOFT_RESET	0xF2
+#define IPCMSG_COLD_BOOT	0xF3
+
+#define IPCMSG_VRTC		0xFA	 /* Set vRTC device */
+	/* Command id associated with message IPCMSG_VRTC */
+	#define IPC_CMD_VRTC_SETTIME      1 /* Set time */
+	#define IPC_CMD_VRTC_SETALARM     2 /* Set alarm */
 
 /* Read single register */
 int intel_scu_ipc_ioread8(u16 addr, u8 *data);
diff --git a/arch/x86/include/asm/mach_timer.h b/arch/x86/include/asm/mach_timer.h
index 8537285..88d0c3c 100644
--- a/arch/x86/include/asm/mach_timer.h
+++ b/arch/x86/include/asm/mach_timer.h
@@ -15,7 +15,7 @@
 
 #define CALIBRATE_TIME_MSEC 30 /* 30 msecs */
 #define CALIBRATE_LATCH	\
-	((CLOCK_TICK_RATE * CALIBRATE_TIME_MSEC + 1000/2)/1000)
+	((PIT_TICK_RATE * CALIBRATE_TIME_MSEC + 1000/2)/1000)
 
 static inline void mach_prepare_counter(void)
 {
diff --git a/arch/x86/include/asm/mc146818rtc.h b/arch/x86/include/asm/mc146818rtc.h
index 01fdf56..0e8e85b 100644
--- a/arch/x86/include/asm/mc146818rtc.h
+++ b/arch/x86/include/asm/mc146818rtc.h
@@ -81,8 +81,8 @@ static inline unsigned char current_lock_cmos_reg(void)
 #else
 #define lock_cmos_prefix(reg) do {} while (0)
 #define lock_cmos_suffix(reg) do {} while (0)
-#define lock_cmos(reg)
-#define unlock_cmos()
+#define lock_cmos(reg) do { } while (0)
+#define unlock_cmos() do { } while (0)
 #define do_i_have_lock_cmos() 0
 #define current_lock_cmos_reg() 0
 #endif
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index 0e8ae57..f35ce43 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -50,10 +50,11 @@
 #define MCJ_CTX_MASK		3
 #define MCJ_CTX(flags)		((flags) & MCJ_CTX_MASK)
 #define MCJ_CTX_RANDOM		0    /* inject context: random */
-#define MCJ_CTX_PROCESS		1    /* inject context: process */
-#define MCJ_CTX_IRQ		2    /* inject context: IRQ */
-#define MCJ_NMI_BROADCAST	4    /* do NMI broadcasting */
-#define MCJ_EXCEPTION		8    /* raise as exception */
+#define MCJ_CTX_PROCESS		0x1  /* inject context: process */
+#define MCJ_CTX_IRQ		0x2  /* inject context: IRQ */
+#define MCJ_NMI_BROADCAST	0x4  /* do NMI broadcasting */
+#define MCJ_EXCEPTION		0x8  /* raise as exception */
+#define MCJ_IRQ_BRAODCAST	0x10 /* do IRQ broadcasting */
 
 /* Fields are zero when not available */
 struct mce {
@@ -120,7 +121,8 @@ struct mce_log {
 
 #ifdef __KERNEL__
 
-extern struct atomic_notifier_head x86_mce_decoder_chain;
+extern void mce_register_decode_chain(struct notifier_block *nb);
+extern void mce_unregister_decode_chain(struct notifier_block *nb);
 
 #include <linux/percpu.h>
 #include <linux/init.h>
@@ -149,7 +151,7 @@ static inline void enable_p5_mce(void) {}
 
 void mce_setup(struct mce *m);
 void mce_log(struct mce *m);
-DECLARE_PER_CPU(struct sys_device, mce_sysdev);
+DECLARE_PER_CPU(struct device, mce_device);
 
 /*
  * Maximum banks number.
diff --git a/arch/x86/include/asm/memblock.h b/arch/x86/include/asm/memblock.h
deleted file mode 100644
index 0cd3800..0000000
--- a/arch/x86/include/asm/memblock.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef _X86_MEMBLOCK_H
-#define _X86_MEMBLOCK_H
-
-#define ARCH_DISCARD_MEMBLOCK
-
-u64 memblock_x86_find_in_range_size(u64 start, u64 *sizep, u64 align);
-
-void memblock_x86_reserve_range(u64 start, u64 end, char *name);
-void memblock_x86_free_range(u64 start, u64 end);
-struct range;
-int __get_free_all_memory_range(struct range **range, int nodeid,
-			 unsigned long start_pfn, unsigned long end_pfn);
-int get_free_all_memory_range(struct range **rangep, int nodeid);
-
-void memblock_x86_register_active_regions(int nid, unsigned long start_pfn,
-					 unsigned long last_pfn);
-u64 memblock_x86_hole_size(u64 start, u64 end);
-u64 memblock_x86_find_in_range_node(int nid, u64 start, u64 end, u64 size, u64 align);
-u64 memblock_x86_free_memory_in_range(u64 addr, u64 limit);
-u64 memblock_x86_memory_in_range(u64 addr, u64 limit);
-bool memblock_x86_check_reserved_size(u64 *addrp, u64 *sizep, u64 align);
-
-#endif
diff --git a/arch/x86/include/asm/microcode.h b/arch/x86/include/asm/microcode.h
index 2421507..4ebe157 100644
--- a/arch/x86/include/asm/microcode.h
+++ b/arch/x86/include/asm/microcode.h
@@ -48,6 +48,7 @@ static inline struct microcode_ops * __init init_intel_microcode(void)
 
 #ifdef CONFIG_MICROCODE_AMD
 extern struct microcode_ops * __init init_amd_microcode(void);
+extern void __exit exit_amd_microcode(void);
 
 static inline void get_ucode_data(void *to, const u8 *from, size_t n)
 {
@@ -59,6 +60,7 @@ static inline struct microcode_ops * __init init_amd_microcode(void)
 {
 	return NULL;
 }
+static inline void __exit exit_amd_microcode(void) {}
 #endif
 
 #endif /* _ASM_X86_MICROCODE_H */
diff --git a/arch/x86/include/asm/mrst.h b/arch/x86/include/asm/mrst.h
index e628312..93f7909 100644
--- a/arch/x86/include/asm/mrst.h
+++ b/arch/x86/include/asm/mrst.h
@@ -31,11 +31,20 @@ enum mrst_cpu_type {
 };
 
 extern enum mrst_cpu_type __mrst_cpu_chip;
+
+#ifdef CONFIG_X86_INTEL_MID
+
 static inline enum mrst_cpu_type mrst_identify_cpu(void)
 {
 	return __mrst_cpu_chip;
 }
 
+#else /* !CONFIG_X86_INTEL_MID */
+
+#define mrst_identify_cpu()    (0)
+
+#endif /* !CONFIG_X86_INTEL_MID */
+
 enum mrst_timer_options {
 	MRST_TIMER_DEFAULT,
 	MRST_TIMER_APBT_ONLY,
diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h
index 084ef95..95203d4 100644
--- a/arch/x86/include/asm/msr.h
+++ b/arch/x86/include/asm/msr.h
@@ -169,7 +169,14 @@ static inline int wrmsr_safe(unsigned msr, unsigned low, unsigned high)
 	return native_write_msr_safe(msr, low, high);
 }
 
-/* rdmsr with exception handling */
+/*
+ * rdmsr with exception handling.
+ *
+ * Please note that the exception handling works only after we've
+ * switched to the "smart" #GP handler in trap_init() which knows about
+ * exception tables - using this macro earlier than that causes machine
+ * hangs on boxes which do not implement the @msr in the first argument.
+ */
 #define rdmsr_safe(msr, p1, p2)					\
 ({								\
 	int __err;						\
diff --git a/arch/x86/include/asm/numachip/numachip_csr.h b/arch/x86/include/asm/numachip/numachip_csr.h
new file mode 100644
index 0000000..660f843
--- /dev/null
+++ b/arch/x86/include/asm/numachip/numachip_csr.h
@@ -0,0 +1,167 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Numascale NumaConnect-Specific Header file
+ *
+ * Copyright (C) 2011 Numascale AS. All rights reserved.
+ *
+ * Send feedback to <support@numascale.com>
+ *
+ */
+
+#ifndef _ASM_X86_NUMACHIP_NUMACHIP_CSR_H
+#define _ASM_X86_NUMACHIP_NUMACHIP_CSR_H
+
+#include <linux/numa.h>
+#include <linux/percpu.h>
+#include <linux/io.h>
+#include <linux/swab.h>
+#include <asm/types.h>
+#include <asm/processor.h>
+
+#define CSR_NODE_SHIFT		16
+#define CSR_NODE_BITS(p)	(((unsigned long)(p)) << CSR_NODE_SHIFT)
+#define CSR_NODE_MASK		0x0fff		/* 4K nodes */
+
+/* 32K CSR space, b15 indicates geo/non-geo */
+#define CSR_OFFSET_MASK	0x7fffUL
+
+/* Global CSR space covers all 4K possible nodes with 64K CSR space per node */
+#define NUMACHIP_GCSR_BASE	0x3fff00000000ULL
+#define NUMACHIP_GCSR_LIM	0x3fff0fffffffULL
+#define NUMACHIP_GCSR_SIZE	(NUMACHIP_GCSR_LIM - NUMACHIP_GCSR_BASE + 1)
+
+/*
+ * Local CSR space starts in global CSR space with "nodeid" = 0xfff0, however
+ * when using the direct mapping on x86_64, both start and size needs to be
+ * aligned with PMD_SIZE which is 2M
+ */
+#define NUMACHIP_LCSR_BASE	0x3ffffe000000ULL
+#define NUMACHIP_LCSR_LIM	0x3fffffffffffULL
+#define NUMACHIP_LCSR_SIZE	(NUMACHIP_LCSR_LIM - NUMACHIP_LCSR_BASE + 1)
+
+static inline void *gcsr_address(int node, unsigned long offset)
+{
+	return __va(NUMACHIP_GCSR_BASE | (1UL << 15) |
+		CSR_NODE_BITS(node & CSR_NODE_MASK) | (offset & CSR_OFFSET_MASK));
+}
+
+static inline void *lcsr_address(unsigned long offset)
+{
+	return __va(NUMACHIP_LCSR_BASE | (1UL << 15) |
+		CSR_NODE_BITS(0xfff0) | (offset & CSR_OFFSET_MASK));
+}
+
+static inline unsigned int read_gcsr(int node, unsigned long offset)
+{
+	return swab32(readl(gcsr_address(node, offset)));
+}
+
+static inline void write_gcsr(int node, unsigned long offset, unsigned int val)
+{
+	writel(swab32(val), gcsr_address(node, offset));
+}
+
+static inline unsigned int read_lcsr(unsigned long offset)
+{
+	return swab32(readl(lcsr_address(offset)));
+}
+
+static inline void write_lcsr(unsigned long offset, unsigned int val)
+{
+	writel(swab32(val), lcsr_address(offset));
+}
+
+/* ========================================================================= */
+/*                   CSR_G0_STATE_CLEAR                                      */
+/* ========================================================================= */
+
+#define CSR_G0_STATE_CLEAR (0x000 + (0 << 12))
+union numachip_csr_g0_state_clear {
+	unsigned int v;
+	struct numachip_csr_g0_state_clear_s {
+		unsigned int _state:2;
+		unsigned int _rsvd_2_6:5;
+		unsigned int _lost:1;
+		unsigned int _rsvd_8_31:24;
+	} s;
+};
+
+/* ========================================================================= */
+/*                   CSR_G0_NODE_IDS                                         */
+/* ========================================================================= */
+
+#define CSR_G0_NODE_IDS (0x008 + (0 << 12))
+union numachip_csr_g0_node_ids {
+	unsigned int v;
+	struct numachip_csr_g0_node_ids_s {
+		unsigned int _initialid:16;
+		unsigned int _nodeid:12;
+		unsigned int _rsvd_28_31:4;
+	} s;
+};
+
+/* ========================================================================= */
+/*                   CSR_G3_EXT_IRQ_GEN                                      */
+/* ========================================================================= */
+
+#define CSR_G3_EXT_IRQ_GEN (0x030 + (3 << 12))
+union numachip_csr_g3_ext_irq_gen {
+	unsigned int v;
+	struct numachip_csr_g3_ext_irq_gen_s {
+		unsigned int _vector:8;
+		unsigned int _msgtype:3;
+		unsigned int _index:5;
+		unsigned int _destination_apic_id:16;
+	} s;
+};
+
+/* ========================================================================= */
+/*                   CSR_G3_EXT_IRQ_STATUS                                   */
+/* ========================================================================= */
+
+#define CSR_G3_EXT_IRQ_STATUS (0x034 + (3 << 12))
+union numachip_csr_g3_ext_irq_status {
+	unsigned int v;
+	struct numachip_csr_g3_ext_irq_status_s {
+		unsigned int _result:32;
+	} s;
+};
+
+/* ========================================================================= */
+/*                   CSR_G3_EXT_IRQ_DEST                                     */
+/* ========================================================================= */
+
+#define CSR_G3_EXT_IRQ_DEST (0x038 + (3 << 12))
+union numachip_csr_g3_ext_irq_dest {
+	unsigned int v;
+	struct numachip_csr_g3_ext_irq_dest_s {
+		unsigned int _irq:8;
+		unsigned int _rsvd_8_31:24;
+	} s;
+};
+
+/* ========================================================================= */
+/*                   CSR_G3_NC_ATT_MAP_SELECT                                */
+/* ========================================================================= */
+
+#define CSR_G3_NC_ATT_MAP_SELECT (0x7fc + (3 << 12))
+union numachip_csr_g3_nc_att_map_select {
+	unsigned int v;
+	struct numachip_csr_g3_nc_att_map_select_s {
+		unsigned int _upper_address_bits:4;
+		unsigned int _select_ram:4;
+		unsigned int _rsvd_8_31:24;
+	} s;
+};
+
+/* ========================================================================= */
+/*                   CSR_G3_NC_ATT_MAP_SELECT_0-255                          */
+/* ========================================================================= */
+
+#define CSR_G3_NC_ATT_MAP_SELECT_0 (0x800 + (3 << 12))
+
+#endif /* _ASM_X86_NUMACHIP_NUMACHIP_CSR_H */
+
diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h
index 3470c9d..529bf07e 100644
--- a/arch/x86/include/asm/percpu.h
+++ b/arch/x86/include/asm/percpu.h
@@ -451,23 +451,20 @@ do {									\
 #endif /* !CONFIG_M386 */
 
 #ifdef CONFIG_X86_CMPXCHG64
-#define percpu_cmpxchg8b_double(pcp1, o1, o2, n1, n2)			\
+#define percpu_cmpxchg8b_double(pcp1, pcp2, o1, o2, n1, n2)		\
 ({									\
-	char __ret;							\
-	typeof(o1) __o1 = o1;						\
-	typeof(o1) __n1 = n1;						\
-	typeof(o2) __o2 = o2;						\
-	typeof(o2) __n2 = n2;						\
-	typeof(o2) __dummy = n2;					\
+	bool __ret;							\
+	typeof(pcp1) __o1 = (o1), __n1 = (n1);				\
+	typeof(pcp2) __o2 = (o2), __n2 = (n2);				\
 	asm volatile("cmpxchg8b "__percpu_arg(1)"\n\tsetz %0\n\t"	\
-		    : "=a"(__ret), "=m" (pcp1), "=d"(__dummy)		\
-		    :  "b"(__n1), "c"(__n2), "a"(__o1), "d"(__o2));	\
+		    : "=a" (__ret), "+m" (pcp1), "+m" (pcp2), "+d" (__o2) \
+		    :  "b" (__n1), "c" (__n2), "a" (__o1));		\
 	__ret;								\
 })
 
-#define __this_cpu_cmpxchg_double_4(pcp1, pcp2, o1, o2, n1, n2)		percpu_cmpxchg8b_double(pcp1, o1, o2, n1, n2)
-#define this_cpu_cmpxchg_double_4(pcp1, pcp2, o1, o2, n1, n2)		percpu_cmpxchg8b_double(pcp1, o1, o2, n1, n2)
-#define irqsafe_cpu_cmpxchg_double_4(pcp1, pcp2, o1, o2, n1, n2)	percpu_cmpxchg8b_double(pcp1, o1, o2, n1, n2)
+#define __this_cpu_cmpxchg_double_4	percpu_cmpxchg8b_double
+#define this_cpu_cmpxchg_double_4	percpu_cmpxchg8b_double
+#define irqsafe_cpu_cmpxchg_double_4	percpu_cmpxchg8b_double
 #endif /* CONFIG_X86_CMPXCHG64 */
 
 /*
@@ -508,31 +505,23 @@ do {									\
  * it in software.  The address used in the cmpxchg16 instruction must be
  * aligned to a 16 byte boundary.
  */
-#ifdef CONFIG_SMP
-#define CMPXCHG16B_EMU_CALL "call this_cpu_cmpxchg16b_emu\n\t" ASM_NOP3
-#else
-#define CMPXCHG16B_EMU_CALL "call this_cpu_cmpxchg16b_emu\n\t" ASM_NOP2
-#endif
-#define percpu_cmpxchg16b_double(pcp1, o1, o2, n1, n2)			\
+#define percpu_cmpxchg16b_double(pcp1, pcp2, o1, o2, n1, n2)		\
 ({									\
-	char __ret;							\
-	typeof(o1) __o1 = o1;						\
-	typeof(o1) __n1 = n1;						\
-	typeof(o2) __o2 = o2;						\
-	typeof(o2) __n2 = n2;						\
-	typeof(o2) __dummy;						\
-	alternative_io(CMPXCHG16B_EMU_CALL,				\
-		       "cmpxchg16b " __percpu_prefix "(%%rsi)\n\tsetz %0\n\t",	\
+	bool __ret;							\
+	typeof(pcp1) __o1 = (o1), __n1 = (n1);				\
+	typeof(pcp2) __o2 = (o2), __n2 = (n2);				\
+	alternative_io("leaq %P1,%%rsi\n\tcall this_cpu_cmpxchg16b_emu\n\t", \
+		       "cmpxchg16b " __percpu_arg(1) "\n\tsetz %0\n\t",	\
 		       X86_FEATURE_CX16,				\
-		       ASM_OUTPUT2("=a"(__ret), "=d"(__dummy)),		\
-		       "S" (&pcp1), "b"(__n1), "c"(__n2),		\
-		       "a"(__o1), "d"(__o2) : "memory");		\
+		       ASM_OUTPUT2("=a" (__ret), "+m" (pcp1),		\
+				   "+m" (pcp2), "+d" (__o2)),		\
+		       "b" (__n1), "c" (__n2), "a" (__o1) : "rsi");	\
 	__ret;								\
 })
 
-#define __this_cpu_cmpxchg_double_8(pcp1, pcp2, o1, o2, n1, n2)		percpu_cmpxchg16b_double(pcp1, o1, o2, n1, n2)
-#define this_cpu_cmpxchg_double_8(pcp1, pcp2, o1, o2, n1, n2)		percpu_cmpxchg16b_double(pcp1, o1, o2, n1, n2)
-#define irqsafe_cpu_cmpxchg_double_8(pcp1, pcp2, o1, o2, n1, n2)	percpu_cmpxchg16b_double(pcp1, o1, o2, n1, n2)
+#define __this_cpu_cmpxchg_double_8	percpu_cmpxchg16b_double
+#define this_cpu_cmpxchg_double_8	percpu_cmpxchg16b_double
+#define irqsafe_cpu_cmpxchg_double_8	percpu_cmpxchg16b_double
 
 #endif
 
diff --git a/arch/x86/include/asm/perf_event.h b/arch/x86/include/asm/perf_event.h
index f61c62f..096c975 100644
--- a/arch/x86/include/asm/perf_event.h
+++ b/arch/x86/include/asm/perf_event.h
@@ -57,6 +57,7 @@
 		(1 << (ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX))
 
 #define ARCH_PERFMON_BRANCH_MISSES_RETIRED		6
+#define ARCH_PERFMON_EVENTS_COUNT			7
 
 /*
  * Intel "Architectural Performance Monitoring" CPUID
@@ -72,6 +73,19 @@ union cpuid10_eax {
 	unsigned int full;
 };
 
+union cpuid10_ebx {
+	struct {
+		unsigned int no_unhalted_core_cycles:1;
+		unsigned int no_instructions_retired:1;
+		unsigned int no_unhalted_reference_cycles:1;
+		unsigned int no_llc_reference:1;
+		unsigned int no_llc_misses:1;
+		unsigned int no_branch_instruction_retired:1;
+		unsigned int no_branch_misses_retired:1;
+	} split;
+	unsigned int full;
+};
+
 union cpuid10_edx {
 	struct {
 		unsigned int num_counters_fixed:5;
@@ -81,6 +95,15 @@ union cpuid10_edx {
 	unsigned int full;
 };
 
+struct x86_pmu_capability {
+	int		version;
+	int		num_counters_gp;
+	int		num_counters_fixed;
+	int		bit_width_gp;
+	int		bit_width_fixed;
+	unsigned int	events_mask;
+	int		events_mask_len;
+};
 
 /*
  * Fixed-purpose performance events:
@@ -89,23 +112,24 @@ union cpuid10_edx {
 /*
  * All 3 fixed-mode PMCs are configured via this single MSR:
  */
-#define MSR_ARCH_PERFMON_FIXED_CTR_CTRL			0x38d
+#define MSR_ARCH_PERFMON_FIXED_CTR_CTRL	0x38d
 
 /*
  * The counts are available in three separate MSRs:
  */
 
 /* Instr_Retired.Any: */
-#define MSR_ARCH_PERFMON_FIXED_CTR0			0x309
-#define X86_PMC_IDX_FIXED_INSTRUCTIONS			(X86_PMC_IDX_FIXED + 0)
+#define MSR_ARCH_PERFMON_FIXED_CTR0	0x309
+#define X86_PMC_IDX_FIXED_INSTRUCTIONS	(X86_PMC_IDX_FIXED + 0)
 
 /* CPU_CLK_Unhalted.Core: */
-#define MSR_ARCH_PERFMON_FIXED_CTR1			0x30a
-#define X86_PMC_IDX_FIXED_CPU_CYCLES			(X86_PMC_IDX_FIXED + 1)
+#define MSR_ARCH_PERFMON_FIXED_CTR1	0x30a
+#define X86_PMC_IDX_FIXED_CPU_CYCLES	(X86_PMC_IDX_FIXED + 1)
 
 /* CPU_CLK_Unhalted.Ref: */
-#define MSR_ARCH_PERFMON_FIXED_CTR2			0x30b
-#define X86_PMC_IDX_FIXED_BUS_CYCLES			(X86_PMC_IDX_FIXED + 2)
+#define MSR_ARCH_PERFMON_FIXED_CTR2	0x30b
+#define X86_PMC_IDX_FIXED_REF_CYCLES	(X86_PMC_IDX_FIXED + 2)
+#define X86_PMC_MSK_FIXED_REF_CYCLES	(1ULL << X86_PMC_IDX_FIXED_REF_CYCLES)
 
 /*
  * We model BTS tracing as another fixed-mode PMC.
@@ -202,6 +226,7 @@ struct perf_guest_switch_msr {
 };
 
 extern struct perf_guest_switch_msr *perf_guest_get_msrs(int *nr);
+extern void perf_get_x86_pmu_capability(struct x86_pmu_capability *cap);
 #else
 static inline perf_guest_switch_msr *perf_guest_get_msrs(int *nr)
 {
@@ -209,6 +234,11 @@ static inline perf_guest_switch_msr *perf_guest_get_msrs(int *nr)
 	return NULL;
 }
 
+static inline void perf_get_x86_pmu_capability(struct x86_pmu_capability *cap)
+{
+	memset(cap, 0, sizeof(*cap));
+}
+
 static inline void perf_events_lapic_init(void)	{ }
 #endif
 
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 18601c8..49afb3f 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -703,7 +703,7 @@ static inline void ptep_set_wrprotect(struct mm_struct *mm,
 	pte_update(mm, addr, ptep);
 }
 
-#define flush_tlb_fix_spurious_fault(vma, address)
+#define flush_tlb_fix_spurious_fault(vma, address) do { } while (0)
 
 #define mk_pmd(page, pgprot)   pfn_pmd(page_to_pfn(page), (pgprot))
 
diff --git a/arch/x86/include/asm/processor-flags.h b/arch/x86/include/asm/processor-flags.h
index 2dddb31..f8ab3ea 100644
--- a/arch/x86/include/asm/processor-flags.h
+++ b/arch/x86/include/asm/processor-flags.h
@@ -6,6 +6,7 @@
  * EFLAGS bits
  */
 #define X86_EFLAGS_CF	0x00000001 /* Carry Flag */
+#define X86_EFLAGS_BIT1	0x00000002 /* Bit 1 - always on */
 #define X86_EFLAGS_PF	0x00000004 /* Parity Flag */
 #define X86_EFLAGS_AF	0x00000010 /* Auxiliary carry Flag */
 #define X86_EFLAGS_ZF	0x00000040 /* Zero Flag */
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index b650435..aa9088c 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -99,7 +99,6 @@ struct cpuinfo_x86 {
 	u16			apicid;
 	u16			initial_apicid;
 	u16			x86_clflush_size;
-#ifdef CONFIG_SMP
 	/* number of cores as seen by the OS: */
 	u16			booted_cores;
 	/* Physical processor id: */
@@ -110,7 +109,6 @@ struct cpuinfo_x86 {
 	u8			compute_unit_id;
 	/* Index into per_cpu list: */
 	u16			cpu_index;
-#endif
 	u32			microcode;
 } __attribute__((__aligned__(SMP_CACHE_BYTES)));
 
diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h
index 972c260..a82c2bf 100644
--- a/arch/x86/include/asm/spinlock.h
+++ b/arch/x86/include/asm/spinlock.h
@@ -79,23 +79,10 @@ static __always_inline int __ticket_spin_trylock(arch_spinlock_t *lock)
 	return cmpxchg(&lock->head_tail, old.head_tail, new.head_tail) == old.head_tail;
 }
 
-#if (NR_CPUS < 256)
 static __always_inline void __ticket_spin_unlock(arch_spinlock_t *lock)
 {
-	asm volatile(UNLOCK_LOCK_PREFIX "incb %0"
-		     : "+m" (lock->head_tail)
-		     :
-		     : "memory", "cc");
+	__add(&lock->tickets.head, 1, UNLOCK_LOCK_PREFIX);
 }
-#else
-static __always_inline void __ticket_spin_unlock(arch_spinlock_t *lock)
-{
-	asm volatile(UNLOCK_LOCK_PREFIX "incw %0"
-		     : "+m" (lock->head_tail)
-		     :
-		     : "memory", "cc");
-}
-#endif
 
 static inline int __ticket_spin_is_locked(arch_spinlock_t *lock)
 {
diff --git a/arch/x86/include/asm/system.h b/arch/x86/include/asm/system.h
index c2ff2a1..2d2f01c 100644
--- a/arch/x86/include/asm/system.h
+++ b/arch/x86/include/asm/system.h
@@ -401,6 +401,7 @@ extern unsigned long arch_align_stack(unsigned long sp);
 extern void free_init_pages(char *what, unsigned long begin, unsigned long end);
 
 void default_idle(void);
+bool set_pm_idle_to_default(void);
 
 void stop_this_cpu(void *dummy);
 
diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h
index a1fe5c1..7404715 100644
--- a/arch/x86/include/asm/thread_info.h
+++ b/arch/x86/include/asm/thread_info.h
@@ -40,7 +40,8 @@ struct thread_info {
 						*/
 	__u8			supervisor_stack[0];
 #endif
-	int			uaccess_err;
+	int			sig_on_uaccess_error:1;
+	int			uaccess_err:1;	/* uaccess failed */
 };
 
 #define INIT_THREAD_INFO(tsk)			\
@@ -90,7 +91,6 @@ struct thread_info {
 #define TIF_MEMDIE		20	/* is terminating due to OOM killer */
 #define TIF_DEBUG		21	/* uses debug registers */
 #define TIF_IO_BITMAP		22	/* uses I/O bitmap */
-#define TIF_FREEZE		23	/* is freezing for suspend */
 #define TIF_FORCED_TF		24	/* true if TF in eflags artificially */
 #define TIF_BLOCKSTEP		25	/* set when we want DEBUGCTLMSR_BTF */
 #define TIF_LAZY_MMU_UPDATES	27	/* task is updating the mmu lazily */
@@ -112,7 +112,6 @@ struct thread_info {
 #define _TIF_FORK		(1 << TIF_FORK)
 #define _TIF_DEBUG		(1 << TIF_DEBUG)
 #define _TIF_IO_BITMAP		(1 << TIF_IO_BITMAP)
-#define _TIF_FREEZE		(1 << TIF_FREEZE)
 #define _TIF_FORCED_TF		(1 << TIF_FORCED_TF)
 #define _TIF_BLOCKSTEP		(1 << TIF_BLOCKSTEP)
 #define _TIF_LAZY_MMU_UPDATES	(1 << TIF_LAZY_MMU_UPDATES)
@@ -231,6 +230,12 @@ static inline struct thread_info *current_thread_info(void)
 	movq PER_CPU_VAR(kernel_stack),reg ; \
 	subq $(THREAD_SIZE-KERNEL_STACK_OFFSET),reg
 
+/*
+ * Same if PER_CPU_VAR(kernel_stack) is, perhaps with some offset, already in
+ * a certain register (to be used in assembler memory operands).
+ */
+#define THREAD_INFO(reg, off) KERNEL_STACK_OFFSET+(off)-THREAD_SIZE(reg)
+
 #endif
 
 #endif /* !X86_32 */
diff --git a/arch/x86/include/asm/timer.h b/arch/x86/include/asm/timer.h
index fa7b917..431793e 100644
--- a/arch/x86/include/asm/timer.h
+++ b/arch/x86/include/asm/timer.h
@@ -32,6 +32,22 @@ extern int no_timer_check;
  *  (mathieu.desnoyers@polymtl.ca)
  *
  *			-johnstul@us.ibm.com "math is hard, lets go shopping!"
+ *
+ * In:
+ *
+ * ns = cycles * cyc2ns_scale / SC
+ *
+ * Although we may still have enough bits to store the value of ns,
+ * in some cases, we may not have enough bits to store cycles * cyc2ns_scale,
+ * leading to an incorrect result.
+ *
+ * To avoid this, we can decompose 'cycles' into quotient and remainder
+ * of division by SC.  Then,
+ *
+ * ns = (quot * SC + rem) * cyc2ns_scale / SC
+ *    = quot * cyc2ns_scale + (rem * cyc2ns_scale) / SC
+ *
+ *			- sqazi@google.com
  */
 
 DECLARE_PER_CPU(unsigned long, cyc2ns);
@@ -41,9 +57,14 @@ DECLARE_PER_CPU(unsigned long long, cyc2ns_offset);
 
 static inline unsigned long long __cycles_2_ns(unsigned long long cyc)
 {
+	unsigned long long quot;
+	unsigned long long rem;
 	int cpu = smp_processor_id();
 	unsigned long long ns = per_cpu(cyc2ns_offset, cpu);
-	ns += cyc * per_cpu(cyc2ns, cpu) >> CYC2NS_SCALE_FACTOR;
+	quot = (cyc >> CYC2NS_SCALE_FACTOR);
+	rem = cyc & ((1ULL << CYC2NS_SCALE_FACTOR) - 1);
+	ns += quot * per_cpu(cyc2ns, cpu) +
+		((rem * per_cpu(cyc2ns, cpu)) >> CYC2NS_SCALE_FACTOR);
 	return ns;
 }
 
diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index c006924..800f77c 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -130,10 +130,8 @@ extern void setup_node_to_cpumask_map(void);
 	.balance_interval	= 1,					\
 }
 
-#ifdef CONFIG_X86_64
 extern int __node_distance(int, int);
 #define node_distance(a, b) __node_distance(a, b)
-#endif
 
 #else /* !CONFIG_NUMA */
 
diff --git a/arch/x86/include/asm/tsc.h b/arch/x86/include/asm/tsc.h
index 83e2efd..15d9915 100644
--- a/arch/x86/include/asm/tsc.h
+++ b/arch/x86/include/asm/tsc.h
@@ -51,6 +51,8 @@ extern int unsynchronized_tsc(void);
 extern int check_tsc_unstable(void);
 extern unsigned long native_calibrate_tsc(void);
 
+extern int tsc_clocksource_reliable;
+
 /*
  * Boot-time check whether the TSCs are synchronized across
  * all CPUs/cores:
diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h
index 36361bf..8be5f54 100644
--- a/arch/x86/include/asm/uaccess.h
+++ b/arch/x86/include/asm/uaccess.h
@@ -462,7 +462,7 @@ struct __large_struct { unsigned long buf[100]; };
 	barrier();
 
 #define uaccess_catch(err)						\
-	(err) |= current_thread_info()->uaccess_err;			\
+	(err) |= (current_thread_info()->uaccess_err ? -EFAULT : 0);	\
 	current_thread_info()->uaccess_err = prev_err;			\
 } while (0)
 
diff --git a/arch/x86/include/asm/uv/uv_mmrs.h b/arch/x86/include/asm/uv/uv_mmrs.h
index 10474fb..cf1d736 100644
--- a/arch/x86/include/asm/uv/uv_mmrs.h
+++ b/arch/x86/include/asm/uv/uv_mmrs.h
@@ -57,6 +57,7 @@
 
 #define UV1_HUB_PART_NUMBER	0x88a5
 #define UV2_HUB_PART_NUMBER	0x8eb8
+#define UV2_HUB_PART_NUMBER_X	0x1111
 
 /* Compat: if this #define is present, UV headers support UV2 */
 #define UV2_HUB_IS_SUPPORTED	1
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index 1971e65..1ac860a 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -7,6 +7,7 @@
 struct mpc_bus;
 struct mpc_cpu;
 struct mpc_table;
+struct cpuinfo_x86;
 
 /**
  * struct x86_init_mpparse - platform specific mpparse ops
@@ -147,6 +148,7 @@ struct x86_init_ops {
  */
 struct x86_cpuinit_ops {
 	void (*setup_percpu_clockev)(void);
+	void (*fixup_cpu_id)(struct cpuinfo_x86 *c, int node);
 };
 
 /**
@@ -186,5 +188,6 @@ extern struct x86_msi_ops x86_msi;
 
 extern void x86_init_noop(void);
 extern void x86_init_uint_noop(unsigned int unused);
+extern void x86_default_fixup_cpu_id(struct cpuinfo_x86 *c, int node);
 
 #endif
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 4558f0d..ce664f3 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -219,6 +219,8 @@ static int __init
 acpi_parse_x2apic(struct acpi_subtable_header *header, const unsigned long end)
 {
 	struct acpi_madt_local_x2apic *processor = NULL;
+	int apic_id;
+	u8 enabled;
 
 	processor = (struct acpi_madt_local_x2apic *)header;
 
@@ -227,6 +229,8 @@ acpi_parse_x2apic(struct acpi_subtable_header *header, const unsigned long end)
 
 	acpi_table_print_madt_entry(header);
 
+	apic_id = processor->local_apic_id;
+	enabled = processor->lapic_flags & ACPI_MADT_ENABLED;
 #ifdef CONFIG_X86_X2APIC
 	/*
 	 * We need to register disabled CPU as well to permit
@@ -235,8 +239,10 @@ acpi_parse_x2apic(struct acpi_subtable_header *header, const unsigned long end)
 	 * to not preallocating memory for all NR_CPUS
 	 * when we use CPU hotplug.
 	 */
-	acpi_register_lapic(processor->local_apic_id,	/* APIC ID */
-			    processor->lapic_flags & ACPI_MADT_ENABLED);
+	if (!cpu_has_x2apic && (apic_id >= 0xff) && enabled)
+		printk(KERN_WARNING PREFIX "x2apic entry ignored\n");
+	else
+		acpi_register_lapic(apic_id, enabled);
 #else
 	printk(KERN_WARNING PREFIX "x2apic entry ignored\n");
 #endif
diff --git a/arch/x86/kernel/amd_nb.c b/arch/x86/kernel/amd_nb.c
index 4c39baa..013c181 100644
--- a/arch/x86/kernel/amd_nb.c
+++ b/arch/x86/kernel/amd_nb.c
@@ -123,16 +123,14 @@ int amd_get_subcaches(int cpu)
 {
 	struct pci_dev *link = node_to_amd_nb(amd_get_nb_id(cpu))->link;
 	unsigned int mask;
-	int cuid = 0;
+	int cuid;
 
 	if (!amd_nb_has_feature(AMD_NB_L3_PARTITIONING))
 		return 0;
 
 	pci_read_config_dword(link, 0x1d4, &mask);
 
-#ifdef CONFIG_SMP
 	cuid = cpu_data(cpu).compute_unit_id;
-#endif
 	return (mask >> (4 * cuid)) & 0xf;
 }
 
@@ -141,7 +139,7 @@ int amd_set_subcaches(int cpu, int mask)
 	static unsigned int reset, ban;
 	struct amd_northbridge *nb = node_to_amd_nb(amd_get_nb_id(cpu));
 	unsigned int reg;
-	int cuid = 0;
+	int cuid;
 
 	if (!amd_nb_has_feature(AMD_NB_L3_PARTITIONING) || mask > 0xf)
 		return -EINVAL;
@@ -159,9 +157,7 @@ int amd_set_subcaches(int cpu, int mask)
 		pci_write_config_dword(nb->misc, 0x1b8, reg & ~0x180000);
 	}
 
-#ifdef CONFIG_SMP
 	cuid = cpu_data(cpu).compute_unit_id;
-#endif
 	mask <<= 4 * cuid;
 	mask |= (0xf ^ (1 << cuid)) << 26;
 
diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c
index 3d2661c..6e76c19 100644
--- a/arch/x86/kernel/aperture_64.c
+++ b/arch/x86/kernel/aperture_64.c
@@ -88,13 +88,13 @@ static u32 __init allocate_aperture(void)
 	 */
 	addr = memblock_find_in_range(GART_MIN_ADDR, GART_MAX_ADDR,
 				      aper_size, aper_size);
-	if (addr == MEMBLOCK_ERROR || addr + aper_size > GART_MAX_ADDR) {
+	if (!addr || addr + aper_size > GART_MAX_ADDR) {
 		printk(KERN_ERR
 			"Cannot allocate aperture memory hole (%lx,%uK)\n",
 				addr, aper_size>>10);
 		return 0;
 	}
-	memblock_x86_reserve_range(addr, addr + aper_size, "aperture64");
+	memblock_reserve(addr, aper_size);
 	/*
 	 * Kmemleak should not scan this block as it may not be mapped via the
 	 * kernel direct mapping.
diff --git a/arch/x86/kernel/apic/Makefile b/arch/x86/kernel/apic/Makefile
index 767fd04..0ae0323 100644
--- a/arch/x86/kernel/apic/Makefile
+++ b/arch/x86/kernel/apic/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_SMP)		+= ipi.o
 
 ifeq ($(CONFIG_X86_64),y)
 # APIC probe will depend on the listing order here
+obj-$(CONFIG_X86_NUMACHIP)	+= apic_numachip.o
 obj-$(CONFIG_X86_UV)		+= x2apic_uv_x.o
 obj-$(CONFIG_X86_X2APIC)	+= x2apic_phys.o
 obj-$(CONFIG_X86_X2APIC)	+= x2apic_cluster.o
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index f98d84c..2eec05b 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -146,16 +146,26 @@ __setup("apicpmtimer", setup_apicpmtimer);
 int x2apic_mode;
 #ifdef CONFIG_X86_X2APIC
 /* x2apic enabled before OS handover */
-static int x2apic_preenabled;
+int x2apic_preenabled;
+static int x2apic_disabled;
+static int nox2apic;
 static __init int setup_nox2apic(char *str)
 {
 	if (x2apic_enabled()) {
-		pr_warning("Bios already enabled x2apic, "
-			   "can't enforce nox2apic");
-		return 0;
-	}
+		int apicid = native_apic_msr_read(APIC_ID);
+
+		if (apicid >= 255) {
+			pr_warning("Apicid: %08x, cannot enforce nox2apic\n",
+				   apicid);
+			return 0;
+		}
+
+		pr_warning("x2apic already enabled. will disable it\n");
+	} else
+		setup_clear_cpu_cap(X86_FEATURE_X2APIC);
+
+	nox2apic = 1;
 
-	setup_clear_cpu_cap(X86_FEATURE_X2APIC);
 	return 0;
 }
 early_param("nox2apic", setup_nox2apic);
@@ -250,6 +260,7 @@ u32 native_safe_apic_wait_icr_idle(void)
 		send_status = apic_read(APIC_ICR) & APIC_ICR_BUSY;
 		if (!send_status)
 			break;
+		inc_irq_stat(icr_read_retry_count);
 		udelay(100);
 	} while (timeout++ < 1000);
 
@@ -876,8 +887,8 @@ void __irq_entry smp_apic_timer_interrupt(struct pt_regs *regs)
 	 * Besides, if we don't timer interrupts ignore the global
 	 * interrupt lock, which is the WrongThing (tm) to do.
 	 */
-	exit_idle();
 	irq_enter();
+	exit_idle();
 	local_apic_timer_interrupt();
 	irq_exit();
 
@@ -1431,6 +1442,45 @@ void __init bsp_end_local_APIC_setup(void)
 }
 
 #ifdef CONFIG_X86_X2APIC
+/*
+ * Need to disable xapic and x2apic at the same time and then enable xapic mode
+ */
+static inline void __disable_x2apic(u64 msr)
+{
+	wrmsrl(MSR_IA32_APICBASE,
+	       msr & ~(X2APIC_ENABLE | XAPIC_ENABLE));
+	wrmsrl(MSR_IA32_APICBASE, msr & ~X2APIC_ENABLE);
+}
+
+static __init void disable_x2apic(void)
+{
+	u64 msr;
+
+	if (!cpu_has_x2apic)
+		return;
+
+	rdmsrl(MSR_IA32_APICBASE, msr);
+	if (msr & X2APIC_ENABLE) {
+		u32 x2apic_id = read_apic_id();
+
+		if (x2apic_id >= 255)
+			panic("Cannot disable x2apic, id: %08x\n", x2apic_id);
+
+		pr_info("Disabling x2apic\n");
+		__disable_x2apic(msr);
+
+		if (nox2apic) {
+			clear_cpu_cap(&cpu_data(0), X86_FEATURE_X2APIC);
+			setup_clear_cpu_cap(X86_FEATURE_X2APIC);
+		}
+
+		x2apic_disabled = 1;
+		x2apic_mode = 0;
+
+		register_lapic_address(mp_lapic_addr);
+	}
+}
+
 void check_x2apic(void)
 {
 	if (x2apic_enabled()) {
@@ -1441,15 +1491,20 @@ void check_x2apic(void)
 
 void enable_x2apic(void)
 {
-	int msr, msr2;
+	u64 msr;
+
+	rdmsrl(MSR_IA32_APICBASE, msr);
+	if (x2apic_disabled) {
+		__disable_x2apic(msr);
+		return;
+	}
 
 	if (!x2apic_mode)
 		return;
 
-	rdmsr(MSR_IA32_APICBASE, msr, msr2);
 	if (!(msr & X2APIC_ENABLE)) {
 		printk_once(KERN_INFO "Enabling x2apic\n");
-		wrmsr(MSR_IA32_APICBASE, msr | X2APIC_ENABLE, msr2);
+		wrmsrl(MSR_IA32_APICBASE, msr | X2APIC_ENABLE);
 	}
 }
 #endif /* CONFIG_X86_X2APIC */
@@ -1486,25 +1541,34 @@ void __init enable_IR_x2apic(void)
 	ret = save_ioapic_entries();
 	if (ret) {
 		pr_info("Saving IO-APIC state failed: %d\n", ret);
-		goto out;
+		return;
 	}
 
 	local_irq_save(flags);
 	legacy_pic->mask_all();
 	mask_ioapic_entries();
 
+	if (x2apic_preenabled && nox2apic)
+		disable_x2apic();
+
 	if (dmar_table_init_ret)
 		ret = -1;
 	else
 		ret = enable_IR();
 
+	if (!x2apic_supported())
+		goto skip_x2apic;
+
 	if (ret < 0) {
 		/* IR is required if there is APIC ID > 255 even when running
 		 * under KVM
 		 */
 		if (max_physical_apicid > 255 ||
-		    !hypervisor_x2apic_available())
-			goto nox2apic;
+		    !hypervisor_x2apic_available()) {
+			if (x2apic_preenabled)
+				disable_x2apic();
+			goto skip_x2apic;
+		}
 		/*
 		 * without IR all CPUs can be addressed by IOAPIC/MSI
 		 * only in physical mode
@@ -1512,8 +1576,10 @@ void __init enable_IR_x2apic(void)
 		x2apic_force_phys();
 	}
 
-	if (ret == IRQ_REMAP_XAPIC_MODE)
-		goto nox2apic;
+	if (ret == IRQ_REMAP_XAPIC_MODE) {
+		pr_info("x2apic not enabled, IRQ remapping is in xapic mode\n");
+		goto skip_x2apic;
+	}
 
 	x2apic_enabled = 1;
 
@@ -1523,22 +1589,11 @@ void __init enable_IR_x2apic(void)
 		pr_info("Enabled x2apic\n");
 	}
 
-nox2apic:
+skip_x2apic:
 	if (ret < 0) /* IR enabling failed */
 		restore_ioapic_entries();
 	legacy_pic->restore_mask();
 	local_irq_restore(flags);
-
-out:
-	if (x2apic_enabled || !x2apic_supported())
-		return;
-
-	if (x2apic_preenabled)
-		panic("x2apic: enabled by BIOS but kernel init failed.");
-	else if (ret == IRQ_REMAP_XAPIC_MODE)
-		pr_info("x2apic not enabled, IRQ remapping is in xapic mode\n");
-	else if (ret < 0)
-		pr_info("x2apic not enabled, IRQ remapping init failed\n");
 }
 
 #ifdef CONFIG_X86_64
@@ -1809,8 +1864,8 @@ void smp_spurious_interrupt(struct pt_regs *regs)
 {
 	u32 v;
 
-	exit_idle();
 	irq_enter();
+	exit_idle();
 	/*
 	 * Check if this really is a spurious interrupt and ACK it
 	 * if it is a vectored one.  Just in case...
@@ -1846,8 +1901,8 @@ void smp_error_interrupt(struct pt_regs *regs)
 		"Illegal register address",	/* APIC Error Bit 7 */
 	};
 
-	exit_idle();
 	irq_enter();
+	exit_idle();
 	/* First tickle the hardware, only then report what went on. -- REW */
 	v0 = apic_read(APIC_ESR);
 	apic_write(APIC_ESR, 0);
diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c
index f7a41e4..8c3cdde 100644
--- a/arch/x86/kernel/apic/apic_flat_64.c
+++ b/arch/x86/kernel/apic/apic_flat_64.c
@@ -62,7 +62,7 @@ static void flat_vector_allocation_domain(int cpu, struct cpumask *retmask)
  * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
  * document number 292116).  So here it goes...
  */
-static void flat_init_apic_ldr(void)
+void flat_init_apic_ldr(void)
 {
 	unsigned long val;
 	unsigned long num, id;
@@ -171,9 +171,14 @@ static int flat_phys_pkg_id(int initial_apic_id, int index_msb)
 	return initial_apic_id >> index_msb;
 }
 
+static int flat_probe(void)
+{
+	return 1;
+}
+
 static struct apic apic_flat =  {
 	.name				= "flat",
-	.probe				= NULL,
+	.probe				= flat_probe,
 	.acpi_madt_oem_check		= flat_acpi_madt_oem_check,
 	.apic_id_registered		= flat_apic_id_registered,
 
diff --git a/arch/x86/kernel/apic/apic_numachip.c b/arch/x86/kernel/apic/apic_numachip.c
new file mode 100644
index 0000000..09d3d8c
--- /dev/null
+++ b/arch/x86/kernel/apic/apic_numachip.c
@@ -0,0 +1,294 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Numascale NumaConnect-Specific APIC Code
+ *
+ * Copyright (C) 2011 Numascale AS. All rights reserved.
+ *
+ * Send feedback to <support@numascale.com>
+ *
+ */
+
+#include <linux/errno.h>
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/ctype.h>
+#include <linux/init.h>
+#include <linux/hardirq.h>
+#include <linux/delay.h>
+
+#include <asm/numachip/numachip_csr.h>
+#include <asm/smp.h>
+#include <asm/apic.h>
+#include <asm/ipi.h>
+#include <asm/apic_flat_64.h>
+
+static int numachip_system __read_mostly;
+
+static struct apic apic_numachip __read_mostly;
+
+static unsigned int get_apic_id(unsigned long x)
+{
+	unsigned long value;
+	unsigned int id;
+
+	rdmsrl(MSR_FAM10H_NODE_ID, value);
+	id = ((x >> 24) & 0xffU) | ((value << 2) & 0x3f00U);
+
+	return id;
+}
+
+static unsigned long set_apic_id(unsigned int id)
+{
+	unsigned long x;
+
+	x = ((id & 0xffU) << 24);
+	return x;
+}
+
+static unsigned int read_xapic_id(void)
+{
+	return get_apic_id(apic_read(APIC_ID));
+}
+
+static int numachip_apic_id_registered(void)
+{
+	return physid_isset(read_xapic_id(), phys_cpu_present_map);
+}
+
+static int numachip_phys_pkg_id(int initial_apic_id, int index_msb)
+{
+	return initial_apic_id >> index_msb;
+}
+
+static const struct cpumask *numachip_target_cpus(void)
+{
+	return cpu_online_mask;
+}
+
+static void numachip_vector_allocation_domain(int cpu, struct cpumask *retmask)
+{
+	cpumask_clear(retmask);
+	cpumask_set_cpu(cpu, retmask);
+}
+
+static int __cpuinit numachip_wakeup_secondary(int phys_apicid, unsigned long start_rip)
+{
+	union numachip_csr_g3_ext_irq_gen int_gen;
+
+	int_gen.s._destination_apic_id = phys_apicid;
+	int_gen.s._vector = 0;
+	int_gen.s._msgtype = APIC_DM_INIT >> 8;
+	int_gen.s._index = 0;
+
+	write_lcsr(CSR_G3_EXT_IRQ_GEN, int_gen.v);
+
+	int_gen.s._msgtype = APIC_DM_STARTUP >> 8;
+	int_gen.s._vector = start_rip >> 12;
+
+	write_lcsr(CSR_G3_EXT_IRQ_GEN, int_gen.v);
+
+	atomic_set(&init_deasserted, 1);
+	return 0;
+}
+
+static void numachip_send_IPI_one(int cpu, int vector)
+{
+	union numachip_csr_g3_ext_irq_gen int_gen;
+	int apicid = per_cpu(x86_cpu_to_apicid, cpu);
+
+	int_gen.s._destination_apic_id = apicid;
+	int_gen.s._vector = vector;
+	int_gen.s._msgtype = (vector == NMI_VECTOR ? APIC_DM_NMI : APIC_DM_FIXED) >> 8;
+	int_gen.s._index = 0;
+
+	write_lcsr(CSR_G3_EXT_IRQ_GEN, int_gen.v);
+}
+
+static void numachip_send_IPI_mask(const struct cpumask *mask, int vector)
+{
+	unsigned int cpu;
+
+	for_each_cpu(cpu, mask)
+		numachip_send_IPI_one(cpu, vector);
+}
+
+static void numachip_send_IPI_mask_allbutself(const struct cpumask *mask,
+						int vector)
+{
+	unsigned int this_cpu = smp_processor_id();
+	unsigned int cpu;
+
+	for_each_cpu(cpu, mask) {
+		if (cpu != this_cpu)
+			numachip_send_IPI_one(cpu, vector);
+	}
+}
+
+static void numachip_send_IPI_allbutself(int vector)
+{
+	unsigned int this_cpu = smp_processor_id();
+	unsigned int cpu;
+
+	for_each_online_cpu(cpu) {
+		if (cpu != this_cpu)
+			numachip_send_IPI_one(cpu, vector);
+	}
+}
+
+static void numachip_send_IPI_all(int vector)
+{
+	numachip_send_IPI_mask(cpu_online_mask, vector);
+}
+
+static void numachip_send_IPI_self(int vector)
+{
+	__default_send_IPI_shortcut(APIC_DEST_SELF, vector, APIC_DEST_PHYSICAL);
+}
+
+static unsigned int numachip_cpu_mask_to_apicid(const struct cpumask *cpumask)
+{
+	int cpu;
+
+	/*
+	 * We're using fixed IRQ delivery, can only return one phys APIC ID.
+	 * May as well be the first.
+	 */
+	cpu = cpumask_first(cpumask);
+	if (likely((unsigned)cpu < nr_cpu_ids))
+		return per_cpu(x86_cpu_to_apicid, cpu);
+
+	return BAD_APICID;
+}
+
+static unsigned int
+numachip_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
+				const struct cpumask *andmask)
+{
+	int cpu;
+
+	/*
+	 * We're using fixed IRQ delivery, can only return one phys APIC ID.
+	 * May as well be the first.
+	 */
+	for_each_cpu_and(cpu, cpumask, andmask) {
+		if (cpumask_test_cpu(cpu, cpu_online_mask))
+			break;
+	}
+	return per_cpu(x86_cpu_to_apicid, cpu);
+}
+
+static int __init numachip_probe(void)
+{
+	return apic == &apic_numachip;
+}
+
+static void __init map_csrs(void)
+{
+	printk(KERN_INFO "NumaChip: Mapping local CSR space (%016llx - %016llx)\n",
+		NUMACHIP_LCSR_BASE, NUMACHIP_LCSR_BASE + NUMACHIP_LCSR_SIZE - 1);
+	init_extra_mapping_uc(NUMACHIP_LCSR_BASE, NUMACHIP_LCSR_SIZE);
+
+	printk(KERN_INFO "NumaChip: Mapping global CSR space (%016llx - %016llx)\n",
+		NUMACHIP_GCSR_BASE, NUMACHIP_GCSR_BASE + NUMACHIP_GCSR_SIZE - 1);
+	init_extra_mapping_uc(NUMACHIP_GCSR_BASE, NUMACHIP_GCSR_SIZE);
+}
+
+static void fixup_cpu_id(struct cpuinfo_x86 *c, int node)
+{
+	c->phys_proc_id = node;
+	per_cpu(cpu_llc_id, smp_processor_id()) = node;
+}
+
+static int __init numachip_system_init(void)
+{
+	unsigned int val;
+
+	if (!numachip_system)
+		return 0;
+
+	x86_cpuinit.fixup_cpu_id = fixup_cpu_id;
+
+	map_csrs();
+
+	val = read_lcsr(CSR_G0_NODE_IDS);
+	printk(KERN_INFO "NumaChip: Local NodeID = %08x\n", val);
+
+	return 0;
+}
+early_initcall(numachip_system_init);
+
+static int numachip_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+	if (!strncmp(oem_id, "NUMASC", 6)) {
+		numachip_system = 1;
+		return 1;
+	}
+
+	return 0;
+}
+
+static struct apic apic_numachip __refconst = {
+
+	.name				= "NumaConnect system",
+	.probe				= numachip_probe,
+	.acpi_madt_oem_check		= numachip_acpi_madt_oem_check,
+	.apic_id_registered		= numachip_apic_id_registered,
+
+	.irq_delivery_mode		= dest_Fixed,
+	.irq_dest_mode			= 0, /* physical */
+
+	.target_cpus			= numachip_target_cpus,
+	.disable_esr			= 0,
+	.dest_logical			= 0,
+	.check_apicid_used		= NULL,
+	.check_apicid_present		= NULL,
+
+	.vector_allocation_domain	= numachip_vector_allocation_domain,
+	.init_apic_ldr			= flat_init_apic_ldr,
+
+	.ioapic_phys_id_map		= NULL,
+	.setup_apic_routing		= NULL,
+	.multi_timer_check		= NULL,
+	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
+	.apicid_to_cpu_present		= NULL,
+	.setup_portio_remap		= NULL,
+	.check_phys_apicid_present	= default_check_phys_apicid_present,
+	.enable_apic_mode		= NULL,
+	.phys_pkg_id			= numachip_phys_pkg_id,
+	.mps_oem_check			= NULL,
+
+	.get_apic_id			= get_apic_id,
+	.set_apic_id			= set_apic_id,
+	.apic_id_mask			= 0xffU << 24,
+
+	.cpu_mask_to_apicid		= numachip_cpu_mask_to_apicid,
+	.cpu_mask_to_apicid_and		= numachip_cpu_mask_to_apicid_and,
+
+	.send_IPI_mask			= numachip_send_IPI_mask,
+	.send_IPI_mask_allbutself	= numachip_send_IPI_mask_allbutself,
+	.send_IPI_allbutself		= numachip_send_IPI_allbutself,
+	.send_IPI_all			= numachip_send_IPI_all,
+	.send_IPI_self			= numachip_send_IPI_self,
+
+	.wakeup_secondary_cpu		= numachip_wakeup_secondary,
+	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
+	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
+	.wait_for_init_deassert		= NULL,
+	.smp_callin_clear_local_apic	= NULL,
+	.inquire_remote_apic		= NULL, /* REMRD not supported */
+
+	.read				= native_apic_mem_read,
+	.write				= native_apic_mem_write,
+	.icr_read			= native_apic_icr_read,
+	.icr_write			= native_apic_icr_write,
+	.wait_icr_idle			= native_apic_wait_icr_idle,
+	.safe_wait_icr_idle		= native_safe_apic_wait_icr_idle,
+};
+apic_driver(apic_numachip);
+
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 6d939d7..fb07275 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -2421,8 +2421,8 @@ asmlinkage void smp_irq_move_cleanup_interrupt(void)
 	unsigned vector, me;
 
 	ack_APIC_irq();
-	exit_idle();
 	irq_enter();
+	exit_idle();
 
 	me = smp_processor_id();
 	for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS; vector++) {
@@ -2948,6 +2948,10 @@ static inline void __init check_timer(void)
 	}
 	local_irq_disable();
 	apic_printk(APIC_QUIET, KERN_INFO "..... failed :(.\n");
+	if (x2apic_preenabled)
+		apic_printk(APIC_QUIET, KERN_INFO
+			    "Perhaps problem with the pre-enabled x2apic mode\n"
+			    "Try booting with x2apic and interrupt-remapping disabled in the bios.\n");
 	panic("IO-APIC + timer doesn't work!  Boot with apic=debug and send a "
 		"report.  Then try booting with the 'noapic' option.\n");
 out:
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 62ae300..9d59bba 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -93,6 +93,8 @@ static int __init early_get_pnodeid(void)
 
 	if (node_id.s.part_number == UV2_HUB_PART_NUMBER)
 		uv_min_hub_revision_id += UV2_HUB_REVISION_BASE - 1;
+	if (node_id.s.part_number == UV2_HUB_PART_NUMBER_X)
+		uv_min_hub_revision_id += UV2_HUB_REVISION_BASE - 1;
 
 	uv_hub_info->hub_revision = uv_min_hub_revision_id;
 	pnode = (node_id.s.node_id >> 1) & ((1 << m_n_config.s.n_skt) - 1);
diff --git a/arch/x86/kernel/check.c b/arch/x86/kernel/check.c
index 452932d..5da1269 100644
--- a/arch/x86/kernel/check.c
+++ b/arch/x86/kernel/check.c
@@ -62,7 +62,8 @@ early_param("memory_corruption_check_size", set_corruption_check_size);
 
 void __init setup_bios_corruption_check(void)
 {
-	u64 addr = PAGE_SIZE;	/* assume first page is reserved anyway */
+	phys_addr_t start, end;
+	u64 i;
 
 	if (memory_corruption_check == -1) {
 		memory_corruption_check =
@@ -82,28 +83,23 @@ void __init setup_bios_corruption_check(void)
 
 	corruption_check_size = round_up(corruption_check_size, PAGE_SIZE);
 
-	while (addr < corruption_check_size && num_scan_areas < MAX_SCAN_AREAS) {
-		u64 size;
-		addr = memblock_x86_find_in_range_size(addr, &size, PAGE_SIZE);
+	for_each_free_mem_range(i, MAX_NUMNODES, &start, &end, NULL) {
+		start = clamp_t(phys_addr_t, round_up(start, PAGE_SIZE),
+				PAGE_SIZE, corruption_check_size);
+		end = clamp_t(phys_addr_t, round_down(end, PAGE_SIZE),
+			      PAGE_SIZE, corruption_check_size);
+		if (start >= end)
+			continue;
 
-		if (addr == MEMBLOCK_ERROR)
-			break;
-
-		if (addr >= corruption_check_size)
-			break;
-
-		if ((addr + size) > corruption_check_size)
-			size = corruption_check_size - addr;
-
-		memblock_x86_reserve_range(addr, addr + size, "SCAN RAM");
-		scan_areas[num_scan_areas].addr = addr;
-		scan_areas[num_scan_areas].size = size;
-		num_scan_areas++;
+		memblock_reserve(start, end - start);
+		scan_areas[num_scan_areas].addr = start;
+		scan_areas[num_scan_areas].size = end - start;
 
 		/* Assume we've already mapped this early memory */
-		memset(__va(addr), 0, size);
+		memset(__va(start), 0, end - start);
 
-		addr += size;
+		if (++num_scan_areas >= MAX_SCAN_AREAS)
+			break;
 	}
 
 	if (num_scan_areas)
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index c7e46cb..f4773f4 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -148,7 +148,6 @@ static void __cpuinit init_amd_k6(struct cpuinfo_x86 *c)
 
 static void __cpuinit amd_k7_smp_check(struct cpuinfo_x86 *c)
 {
-#ifdef CONFIG_SMP
 	/* calling is from identify_secondary_cpu() ? */
 	if (!c->cpu_index)
 		return;
@@ -192,7 +191,6 @@ static void __cpuinit amd_k7_smp_check(struct cpuinfo_x86 *c)
 
 valid_k7:
 	;
-#endif
 }
 
 static void __cpuinit init_amd_k7(struct cpuinfo_x86 *c)
@@ -353,6 +351,13 @@ static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c)
 	if (node == NUMA_NO_NODE)
 		node = per_cpu(cpu_llc_id, cpu);
 
+	/*
+	 * If core numbers are inconsistent, it's likely a multi-fabric platform,
+	 * so invoke platform-specific handler
+	 */
+	if (c->phys_proc_id != node)
+		x86_cpuinit.fixup_cpu_id(c, node);
+
 	if (!node_online(node)) {
 		/*
 		 * Two possibilities here:
@@ -442,8 +447,6 @@ static void __cpuinit bsp_init_amd(struct cpuinfo_x86 *c)
 
 static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
 {
-	u32 dummy;
-
 	early_init_amd_mc(c);
 
 	/*
@@ -473,12 +476,12 @@ static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
 			set_cpu_cap(c, X86_FEATURE_EXTD_APICID);
 	}
 #endif
-
-	rdmsr_safe(MSR_AMD64_PATCH_LEVEL, &c->microcode, &dummy);
 }
 
 static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 {
+	u32 dummy;
+
 #ifdef CONFIG_SMP
 	unsigned long long value;
 
@@ -657,6 +660,8 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 			checking_wrmsrl(MSR_AMD64_MCx_MASK(4), mask);
 		}
 	}
+
+	rdmsr_safe(MSR_AMD64_PATCH_LEVEL, &c->microcode, &dummy);
 }
 
 #ifdef CONFIG_X86_32
diff --git a/arch/x86/kernel/cpu/centaur.c b/arch/x86/kernel/cpu/centaur.c
index e58d978..159103c 100644
--- a/arch/x86/kernel/cpu/centaur.c
+++ b/arch/x86/kernel/cpu/centaur.c
@@ -278,7 +278,7 @@ static void __cpuinit init_c3(struct cpuinfo_x86 *c)
 	}
 #ifdef CONFIG_X86_32
 	/* Cyrix III family needs CX8 & PGE explicitly enabled. */
-	if (c->x86_model >= 6 && c->x86_model <= 9) {
+	if (c->x86_model >= 6 && c->x86_model <= 13) {
 		rdmsr(MSR_VIA_FCR, lo, hi);
 		lo |= (1<<1 | 1<<7);
 		wrmsr(MSR_VIA_FCR, lo, hi);
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index aa003b1..850f296 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -676,9 +676,7 @@ static void __init early_identify_cpu(struct cpuinfo_x86 *c)
 	if (this_cpu->c_early_init)
 		this_cpu->c_early_init(c);
 
-#ifdef CONFIG_SMP
 	c->cpu_index = 0;
-#endif
 	filter_cpuid_features(c, false);
 
 	setup_smep(c);
@@ -764,10 +762,7 @@ static void __cpuinit generic_identify(struct cpuinfo_x86 *c)
 		c->apicid = c->initial_apicid;
 # endif
 #endif
-
-#ifdef CONFIG_X86_HT
 		c->phys_proc_id = c->initial_apicid;
-#endif
 	}
 
 	setup_smep(c);
@@ -1141,6 +1136,15 @@ static void dbg_restore_debug_regs(void)
 #endif /* ! CONFIG_KGDB */
 
 /*
+ * Prints an error where the NUMA and configured core-number mismatch and the
+ * platform didn't override this to fix it up
+ */
+void __cpuinit x86_default_fixup_cpu_id(struct cpuinfo_x86 *c, int node)
+{
+	pr_err("NUMA core number %d differs from configured core number %d\n", node, c->phys_proc_id);
+}
+
+/*
  * cpu_init() initializes state that is per-CPU. Some data is already
  * initialized (naturally) in the bootstrap process, such as the GDT
  * and IDT. We reload them nevertheless, this function acts as a
diff --git a/arch/x86/kernel/cpu/cpu.h b/arch/x86/kernel/cpu/cpu.h
index 1b22dcc..8bacc78 100644
--- a/arch/x86/kernel/cpu/cpu.h
+++ b/arch/x86/kernel/cpu/cpu.h
@@ -1,5 +1,4 @@
 #ifndef ARCH_X86_CPU_H
-
 #define ARCH_X86_CPU_H
 
 struct cpu_model_info {
@@ -35,6 +34,4 @@ extern const struct cpu_dev *const __x86_cpu_dev_start[],
 
 extern void get_cpu_cap(struct cpuinfo_x86 *c);
 extern void cpu_detect_cache_sizes(struct cpuinfo_x86 *c);
-extern void get_cpu_cap(struct cpuinfo_x86 *c);
-
-#endif
+#endif /* ARCH_X86_CPU_H */
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index 5231312..3e6ff6c 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -181,7 +181,6 @@ static void __cpuinit trap_init_f00f_bug(void)
 
 static void __cpuinit intel_smp_check(struct cpuinfo_x86 *c)
 {
-#ifdef CONFIG_SMP
 	/* calling is from identify_secondary_cpu() ? */
 	if (!c->cpu_index)
 		return;
@@ -198,7 +197,6 @@ static void __cpuinit intel_smp_check(struct cpuinfo_x86 *c)
 		WARN_ONCE(1, "WARNING: SMP operation may be unreliable"
 				    "with B stepping processors.\n");
 	}
-#endif
 }
 
 static void __cpuinit intel_workarounds(struct cpuinfo_x86 *c)
diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c
index a3b0811..6b45e5e 100644
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -844,8 +844,7 @@ static int __cpuinit detect_cache_attributes(unsigned int cpu)
 
 #include <linux/kobject.h>
 #include <linux/sysfs.h>
-
-extern struct sysdev_class cpu_sysdev_class; /* from drivers/base/cpu.c */
+#include <linux/cpu.h>
 
 /* pointer to kobject for cpuX/cache */
 static DEFINE_PER_CPU(struct kobject *, ici_cache_kobject);
@@ -1073,9 +1072,9 @@ err_out:
 static DECLARE_BITMAP(cache_dev_map, NR_CPUS);
 
 /* Add/Remove cache interface for CPU device */
-static int __cpuinit cache_add_dev(struct sys_device * sys_dev)
+static int __cpuinit cache_add_dev(struct device *dev)
 {
-	unsigned int cpu = sys_dev->id;
+	unsigned int cpu = dev->id;
 	unsigned long i, j;
 	struct _index_kobject *this_object;
 	struct _cpuid4_info   *this_leaf;
@@ -1087,7 +1086,7 @@ static int __cpuinit cache_add_dev(struct sys_device * sys_dev)
 
 	retval = kobject_init_and_add(per_cpu(ici_cache_kobject, cpu),
 				      &ktype_percpu_entry,
-				      &sys_dev->kobj, "%s", "cache");
+				      &dev->kobj, "%s", "cache");
 	if (retval < 0) {
 		cpuid4_cache_sysfs_exit(cpu);
 		return retval;
@@ -1124,9 +1123,9 @@ static int __cpuinit cache_add_dev(struct sys_device * sys_dev)
 	return 0;
 }
 
-static void __cpuinit cache_remove_dev(struct sys_device * sys_dev)
+static void __cpuinit cache_remove_dev(struct device *dev)
 {
-	unsigned int cpu = sys_dev->id;
+	unsigned int cpu = dev->id;
 	unsigned long i;
 
 	if (per_cpu(ici_cpuid4_info, cpu) == NULL)
@@ -1145,17 +1144,17 @@ static int __cpuinit cacheinfo_cpu_callback(struct notifier_block *nfb,
 					unsigned long action, void *hcpu)
 {
 	unsigned int cpu = (unsigned long)hcpu;
-	struct sys_device *sys_dev;
+	struct device *dev;
 
-	sys_dev = get_cpu_sysdev(cpu);
+	dev = get_cpu_device(cpu);
 	switch (action) {
 	case CPU_ONLINE:
 	case CPU_ONLINE_FROZEN:
-		cache_add_dev(sys_dev);
+		cache_add_dev(dev);
 		break;
 	case CPU_DEAD:
 	case CPU_DEAD_FROZEN:
-		cache_remove_dev(sys_dev);
+		cache_remove_dev(dev);
 		break;
 	}
 	return NOTIFY_OK;
@@ -1174,9 +1173,9 @@ static int __cpuinit cache_sysfs_init(void)
 
 	for_each_online_cpu(i) {
 		int err;
-		struct sys_device *sys_dev = get_cpu_sysdev(i);
+		struct device *dev = get_cpu_device(i);
 
-		err = cache_add_dev(sys_dev);
+		err = cache_add_dev(dev);
 		if (err)
 			return err;
 	}
diff --git a/arch/x86/kernel/cpu/mcheck/mce-inject.c b/arch/x86/kernel/cpu/mcheck/mce-inject.c
index 319882e..fc4beb3 100644
--- a/arch/x86/kernel/cpu/mcheck/mce-inject.c
+++ b/arch/x86/kernel/cpu/mcheck/mce-inject.c
@@ -17,6 +17,7 @@
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/fs.h>
+#include <linux/preempt.h>
 #include <linux/smp.h>
 #include <linux/notifier.h>
 #include <linux/kdebug.h>
@@ -92,6 +93,18 @@ static int mce_raise_notify(unsigned int cmd, struct pt_regs *regs)
 	return NMI_HANDLED;
 }
 
+static void mce_irq_ipi(void *info)
+{
+	int cpu = smp_processor_id();
+	struct mce *m = &__get_cpu_var(injectm);
+
+	if (cpumask_test_cpu(cpu, mce_inject_cpumask) &&
+			m->inject_flags & MCJ_EXCEPTION) {
+		cpumask_clear_cpu(cpu, mce_inject_cpumask);
+		raise_exception(m, NULL);
+	}
+}
+
 /* Inject mce on current CPU */
 static int raise_local(void)
 {
@@ -139,9 +152,10 @@ static void raise_mce(struct mce *m)
 		return;
 
 #ifdef CONFIG_X86_LOCAL_APIC
-	if (m->inject_flags & MCJ_NMI_BROADCAST) {
+	if (m->inject_flags & (MCJ_IRQ_BRAODCAST | MCJ_NMI_BROADCAST)) {
 		unsigned long start;
 		int cpu;
+
 		get_online_cpus();
 		cpumask_copy(mce_inject_cpumask, cpu_online_mask);
 		cpumask_clear_cpu(get_cpu(), mce_inject_cpumask);
@@ -151,13 +165,25 @@ static void raise_mce(struct mce *m)
 			    MCJ_CTX(mcpu->inject_flags) != MCJ_CTX_RANDOM)
 				cpumask_clear_cpu(cpu, mce_inject_cpumask);
 		}
-		if (!cpumask_empty(mce_inject_cpumask))
-			apic->send_IPI_mask(mce_inject_cpumask, NMI_VECTOR);
+		if (!cpumask_empty(mce_inject_cpumask)) {
+			if (m->inject_flags & MCJ_IRQ_BRAODCAST) {
+				/*
+				 * don't wait because mce_irq_ipi is necessary
+				 * to be sync with following raise_local
+				 */
+				preempt_disable();
+				smp_call_function_many(mce_inject_cpumask,
+					mce_irq_ipi, NULL, 0);
+				preempt_enable();
+			} else if (m->inject_flags & MCJ_NMI_BROADCAST)
+				apic->send_IPI_mask(mce_inject_cpumask,
+						NMI_VECTOR);
+		}
 		start = jiffies;
 		while (!cpumask_empty(mce_inject_cpumask)) {
 			if (!time_before(jiffies, start + 2*HZ)) {
 				printk(KERN_ERR
-				"Timeout waiting for mce inject NMI %lx\n",
+				"Timeout waiting for mce inject %lx\n",
 					*cpumask_bits(mce_inject_cpumask));
 				break;
 			}
diff --git a/arch/x86/kernel/cpu/mcheck/mce-internal.h b/arch/x86/kernel/cpu/mcheck/mce-internal.h
index fefcc69..ed44c8a 100644
--- a/arch/x86/kernel/cpu/mcheck/mce-internal.h
+++ b/arch/x86/kernel/cpu/mcheck/mce-internal.h
@@ -1,4 +1,4 @@
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <asm/mce.h>
 
 enum severity_level {
@@ -17,7 +17,7 @@ enum severity_level {
 struct mce_bank {
 	u64			ctl;			/* subevents to enable */
 	unsigned char init;				/* initialise bank? */
-	struct sysdev_attribute attr;			/* sysdev attribute */
+	struct device_attribute attr;			/* device attribute */
 	char			attrname[ATTR_LEN];	/* attribute name */
 };
 
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 2af127d..f22a9f7 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -19,7 +19,7 @@
 #include <linux/kernel.h>
 #include <linux/percpu.h>
 #include <linux/string.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/syscore_ops.h>
 #include <linux/delay.h>
 #include <linux/ctype.h>
@@ -95,13 +95,6 @@ static DECLARE_WAIT_QUEUE_HEAD(mce_chrdev_wait);
 static DEFINE_PER_CPU(struct mce, mces_seen);
 static int			cpu_missing;
 
-/*
- * CPU/chipset specific EDAC code can register a notifier call here to print
- * MCE errors in a human-readable form.
- */
-ATOMIC_NOTIFIER_HEAD(x86_mce_decoder_chain);
-EXPORT_SYMBOL_GPL(x86_mce_decoder_chain);
-
 /* MCA banks polled by the period polling timer for corrected events */
 DEFINE_PER_CPU(mce_banks_t, mce_poll_banks) = {
 	[0 ... BITS_TO_LONGS(MAX_NR_BANKS)-1] = ~0UL
@@ -109,6 +102,12 @@ DEFINE_PER_CPU(mce_banks_t, mce_poll_banks) = {
 
 static DEFINE_PER_CPU(struct work_struct, mce_work);
 
+/*
+ * CPU/chipset specific EDAC code can register a notifier call here to print
+ * MCE errors in a human-readable form.
+ */
+ATOMIC_NOTIFIER_HEAD(x86_mce_decoder_chain);
+
 /* Do initial initialization of a struct mce */
 void mce_setup(struct mce *m)
 {
@@ -119,9 +118,7 @@ void mce_setup(struct mce *m)
 	m->time = get_seconds();
 	m->cpuvendor = boot_cpu_data.x86_vendor;
 	m->cpuid = cpuid_eax(1);
-#ifdef CONFIG_SMP
 	m->socketid = cpu_data(m->extcpu).phys_proc_id;
-#endif
 	m->apicid = cpu_data(m->extcpu).initial_apicid;
 	rdmsrl(MSR_IA32_MCG_CAP, m->mcgcap);
 }
@@ -190,6 +187,57 @@ void mce_log(struct mce *mce)
 	set_bit(0, &mce_need_notify);
 }
 
+static void drain_mcelog_buffer(void)
+{
+	unsigned int next, i, prev = 0;
+
+	next = rcu_dereference_check_mce(mcelog.next);
+
+	do {
+		struct mce *m;
+
+		/* drain what was logged during boot */
+		for (i = prev; i < next; i++) {
+			unsigned long start = jiffies;
+			unsigned retries = 1;
+
+			m = &mcelog.entry[i];
+
+			while (!m->finished) {
+				if (time_after_eq(jiffies, start + 2*retries))
+					retries++;
+
+				cpu_relax();
+
+				if (!m->finished && retries >= 4) {
+					pr_err("MCE: skipping error being logged currently!\n");
+					break;
+				}
+			}
+			smp_rmb();
+			atomic_notifier_call_chain(&x86_mce_decoder_chain, 0, m);
+		}
+
+		memset(mcelog.entry + prev, 0, (next - prev) * sizeof(*m));
+		prev = next;
+		next = cmpxchg(&mcelog.next, prev, 0);
+	} while (next != prev);
+}
+
+
+void mce_register_decode_chain(struct notifier_block *nb)
+{
+	atomic_notifier_chain_register(&x86_mce_decoder_chain, nb);
+	drain_mcelog_buffer();
+}
+EXPORT_SYMBOL_GPL(mce_register_decode_chain);
+
+void mce_unregister_decode_chain(struct notifier_block *nb)
+{
+	atomic_notifier_chain_unregister(&x86_mce_decoder_chain, nb);
+}
+EXPORT_SYMBOL_GPL(mce_unregister_decode_chain);
+
 static void print_mce(struct mce *m)
 {
 	int ret = 0;
@@ -1770,7 +1818,7 @@ static struct syscore_ops mce_syscore_ops = {
 };
 
 /*
- * mce_sysdev: Sysfs support
+ * mce_device: Sysfs support
  */
 
 static void mce_cpu_restart(void *data)
@@ -1806,27 +1854,28 @@ static void mce_enable_ce(void *all)
 		__mcheck_cpu_init_timer();
 }
 
-static struct sysdev_class mce_sysdev_class = {
+static struct bus_type mce_subsys = {
 	.name		= "machinecheck",
+	.dev_name	= "machinecheck",
 };
 
-DEFINE_PER_CPU(struct sys_device, mce_sysdev);
+DEFINE_PER_CPU(struct device, mce_device);
 
 __cpuinitdata
 void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu);
 
-static inline struct mce_bank *attr_to_bank(struct sysdev_attribute *attr)
+static inline struct mce_bank *attr_to_bank(struct device_attribute *attr)
 {
 	return container_of(attr, struct mce_bank, attr);
 }
 
-static ssize_t show_bank(struct sys_device *s, struct sysdev_attribute *attr,
+static ssize_t show_bank(struct device *s, struct device_attribute *attr,
 			 char *buf)
 {
 	return sprintf(buf, "%llx\n", attr_to_bank(attr)->ctl);
 }
 
-static ssize_t set_bank(struct sys_device *s, struct sysdev_attribute *attr,
+static ssize_t set_bank(struct device *s, struct device_attribute *attr,
 			const char *buf, size_t size)
 {
 	u64 new;
@@ -1841,14 +1890,14 @@ static ssize_t set_bank(struct sys_device *s, struct sysdev_attribute *attr,
 }
 
 static ssize_t
-show_trigger(struct sys_device *s, struct sysdev_attribute *attr, char *buf)
+show_trigger(struct device *s, struct device_attribute *attr, char *buf)
 {
 	strcpy(buf, mce_helper);
 	strcat(buf, "\n");
 	return strlen(mce_helper) + 1;
 }
 
-static ssize_t set_trigger(struct sys_device *s, struct sysdev_attribute *attr,
+static ssize_t set_trigger(struct device *s, struct device_attribute *attr,
 				const char *buf, size_t siz)
 {
 	char *p;
@@ -1863,8 +1912,8 @@ static ssize_t set_trigger(struct sys_device *s, struct sysdev_attribute *attr,
 	return strlen(mce_helper) + !!p;
 }
 
-static ssize_t set_ignore_ce(struct sys_device *s,
-			     struct sysdev_attribute *attr,
+static ssize_t set_ignore_ce(struct device *s,
+			     struct device_attribute *attr,
 			     const char *buf, size_t size)
 {
 	u64 new;
@@ -1887,8 +1936,8 @@ static ssize_t set_ignore_ce(struct sys_device *s,
 	return size;
 }
 
-static ssize_t set_cmci_disabled(struct sys_device *s,
-				 struct sysdev_attribute *attr,
+static ssize_t set_cmci_disabled(struct device *s,
+				 struct device_attribute *attr,
 				 const char *buf, size_t size)
 {
 	u64 new;
@@ -1910,108 +1959,107 @@ static ssize_t set_cmci_disabled(struct sys_device *s,
 	return size;
 }
 
-static ssize_t store_int_with_restart(struct sys_device *s,
-				      struct sysdev_attribute *attr,
+static ssize_t store_int_with_restart(struct device *s,
+				      struct device_attribute *attr,
 				      const char *buf, size_t size)
 {
-	ssize_t ret = sysdev_store_int(s, attr, buf, size);
+	ssize_t ret = device_store_int(s, attr, buf, size);
 	mce_restart();
 	return ret;
 }
 
-static SYSDEV_ATTR(trigger, 0644, show_trigger, set_trigger);
-static SYSDEV_INT_ATTR(tolerant, 0644, tolerant);
-static SYSDEV_INT_ATTR(monarch_timeout, 0644, monarch_timeout);
-static SYSDEV_INT_ATTR(dont_log_ce, 0644, mce_dont_log_ce);
+static DEVICE_ATTR(trigger, 0644, show_trigger, set_trigger);
+static DEVICE_INT_ATTR(tolerant, 0644, tolerant);
+static DEVICE_INT_ATTR(monarch_timeout, 0644, monarch_timeout);
+static DEVICE_INT_ATTR(dont_log_ce, 0644, mce_dont_log_ce);
 
-static struct sysdev_ext_attribute attr_check_interval = {
-	_SYSDEV_ATTR(check_interval, 0644, sysdev_show_int,
-		     store_int_with_restart),
+static struct dev_ext_attribute dev_attr_check_interval = {
+	__ATTR(check_interval, 0644, device_show_int, store_int_with_restart),
 	&check_interval
 };
 
-static struct sysdev_ext_attribute attr_ignore_ce = {
-	_SYSDEV_ATTR(ignore_ce, 0644, sysdev_show_int, set_ignore_ce),
+static struct dev_ext_attribute dev_attr_ignore_ce = {
+	__ATTR(ignore_ce, 0644, device_show_int, set_ignore_ce),
 	&mce_ignore_ce
 };
 
-static struct sysdev_ext_attribute attr_cmci_disabled = {
-	_SYSDEV_ATTR(cmci_disabled, 0644, sysdev_show_int, set_cmci_disabled),
+static struct dev_ext_attribute dev_attr_cmci_disabled = {
+	__ATTR(cmci_disabled, 0644, device_show_int, set_cmci_disabled),
 	&mce_cmci_disabled
 };
 
-static struct sysdev_attribute *mce_sysdev_attrs[] = {
-	&attr_tolerant.attr,
-	&attr_check_interval.attr,
-	&attr_trigger,
-	&attr_monarch_timeout.attr,
-	&attr_dont_log_ce.attr,
-	&attr_ignore_ce.attr,
-	&attr_cmci_disabled.attr,
+static struct device_attribute *mce_device_attrs[] = {
+	&dev_attr_tolerant.attr,
+	&dev_attr_check_interval.attr,
+	&dev_attr_trigger,
+	&dev_attr_monarch_timeout.attr,
+	&dev_attr_dont_log_ce.attr,
+	&dev_attr_ignore_ce.attr,
+	&dev_attr_cmci_disabled.attr,
 	NULL
 };
 
-static cpumask_var_t mce_sysdev_initialized;
+static cpumask_var_t mce_device_initialized;
 
-/* Per cpu sysdev init. All of the cpus still share the same ctrl bank: */
-static __cpuinit int mce_sysdev_create(unsigned int cpu)
+/* Per cpu device init. All of the cpus still share the same ctrl bank: */
+static __cpuinit int mce_device_create(unsigned int cpu)
 {
-	struct sys_device *sysdev = &per_cpu(mce_sysdev, cpu);
+	struct device *dev = &per_cpu(mce_device, cpu);
 	int err;
 	int i, j;
 
 	if (!mce_available(&boot_cpu_data))
 		return -EIO;
 
-	memset(&sysdev->kobj, 0, sizeof(struct kobject));
-	sysdev->id  = cpu;
-	sysdev->cls = &mce_sysdev_class;
+	memset(&dev->kobj, 0, sizeof(struct kobject));
+	dev->id  = cpu;
+	dev->bus = &mce_subsys;
 
-	err = sysdev_register(sysdev);
+	err = device_register(dev);
 	if (err)
 		return err;
 
-	for (i = 0; mce_sysdev_attrs[i]; i++) {
-		err = sysdev_create_file(sysdev, mce_sysdev_attrs[i]);
+	for (i = 0; mce_device_attrs[i]; i++) {
+		err = device_create_file(dev, mce_device_attrs[i]);
 		if (err)
 			goto error;
 	}
 	for (j = 0; j < banks; j++) {
-		err = sysdev_create_file(sysdev, &mce_banks[j].attr);
+		err = device_create_file(dev, &mce_banks[j].attr);
 		if (err)
 			goto error2;
 	}
-	cpumask_set_cpu(cpu, mce_sysdev_initialized);
+	cpumask_set_cpu(cpu, mce_device_initialized);
 
 	return 0;
 error2:
 	while (--j >= 0)
-		sysdev_remove_file(sysdev, &mce_banks[j].attr);
+		device_remove_file(dev, &mce_banks[j].attr);
 error:
 	while (--i >= 0)
-		sysdev_remove_file(sysdev, mce_sysdev_attrs[i]);
+		device_remove_file(dev, mce_device_attrs[i]);
 
-	sysdev_unregister(sysdev);
+	device_unregister(dev);
 
 	return err;
 }
 
-static __cpuinit void mce_sysdev_remove(unsigned int cpu)
+static __cpuinit void mce_device_remove(unsigned int cpu)
 {
-	struct sys_device *sysdev = &per_cpu(mce_sysdev, cpu);
+	struct device *dev = &per_cpu(mce_device, cpu);
 	int i;
 
-	if (!cpumask_test_cpu(cpu, mce_sysdev_initialized))
+	if (!cpumask_test_cpu(cpu, mce_device_initialized))
 		return;
 
-	for (i = 0; mce_sysdev_attrs[i]; i++)
-		sysdev_remove_file(sysdev, mce_sysdev_attrs[i]);
+	for (i = 0; mce_device_attrs[i]; i++)
+		device_remove_file(dev, mce_device_attrs[i]);
 
 	for (i = 0; i < banks; i++)
-		sysdev_remove_file(sysdev, &mce_banks[i].attr);
+		device_remove_file(dev, &mce_banks[i].attr);
 
-	sysdev_unregister(sysdev);
-	cpumask_clear_cpu(cpu, mce_sysdev_initialized);
+	device_unregister(dev);
+	cpumask_clear_cpu(cpu, mce_device_initialized);
 }
 
 /* Make sure there are no machine checks on offlined CPUs. */
@@ -2061,7 +2109,7 @@ mce_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu)
 	switch (action) {
 	case CPU_ONLINE:
 	case CPU_ONLINE_FROZEN:
-		mce_sysdev_create(cpu);
+		mce_device_create(cpu);
 		if (threshold_cpu_callback)
 			threshold_cpu_callback(action, cpu);
 		break;
@@ -2069,7 +2117,7 @@ mce_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu)
 	case CPU_DEAD_FROZEN:
 		if (threshold_cpu_callback)
 			threshold_cpu_callback(action, cpu);
-		mce_sysdev_remove(cpu);
+		mce_device_remove(cpu);
 		break;
 	case CPU_DOWN_PREPARE:
 	case CPU_DOWN_PREPARE_FROZEN:
@@ -2103,7 +2151,7 @@ static __init void mce_init_banks(void)
 
 	for (i = 0; i < banks; i++) {
 		struct mce_bank *b = &mce_banks[i];
-		struct sysdev_attribute *a = &b->attr;
+		struct device_attribute *a = &b->attr;
 
 		sysfs_attr_init(&a->attr);
 		a->attr.name	= b->attrname;
@@ -2123,16 +2171,16 @@ static __init int mcheck_init_device(void)
 	if (!mce_available(&boot_cpu_data))
 		return -EIO;
 
-	zalloc_cpumask_var(&mce_sysdev_initialized, GFP_KERNEL);
+	zalloc_cpumask_var(&mce_device_initialized, GFP_KERNEL);
 
 	mce_init_banks();
 
-	err = sysdev_class_register(&mce_sysdev_class);
+	err = subsys_system_register(&mce_subsys, NULL);
 	if (err)
 		return err;
 
 	for_each_online_cpu(i) {
-		err = mce_sysdev_create(i);
+		err = mce_device_create(i);
 		if (err)
 			return err;
 	}
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c
index f547421..ba0b94a 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c
@@ -17,7 +17,6 @@
 #include <linux/notifier.h>
 #include <linux/kobject.h>
 #include <linux/percpu.h>
-#include <linux/sysdev.h>
 #include <linux/errno.h>
 #include <linux/sched.h>
 #include <linux/sysfs.h>
@@ -64,11 +63,9 @@ struct threshold_bank {
 };
 static DEFINE_PER_CPU(struct threshold_bank * [NR_BANKS], threshold_banks);
 
-#ifdef CONFIG_SMP
 static unsigned char shared_bank[NR_BANKS] = {
 	0, 0, 0, 0, 1
 };
-#endif
 
 static DEFINE_PER_CPU(unsigned char, bank_map);	/* see which banks are on */
 
@@ -202,10 +199,9 @@ void mce_amd_feature_init(struct cpuinfo_x86 *c)
 
 			if (!block)
 				per_cpu(bank_map, cpu) |= (1 << bank);
-#ifdef CONFIG_SMP
 			if (shared_bank[bank] && c->cpu_core_id)
 				break;
-#endif
+
 			offset = setup_APIC_mce(offset,
 						(high & MASK_LVTOFF_HI) >> 20);
 
@@ -531,7 +527,6 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank)
 
 	sprintf(name, "threshold_bank%i", bank);
 
-#ifdef CONFIG_SMP
 	if (cpu_data(cpu).cpu_core_id && shared_bank[bank]) {	/* symlink */
 		i = cpumask_first(cpu_llc_shared_mask(cpu));
 
@@ -548,7 +543,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank)
 		if (!b)
 			goto out;
 
-		err = sysfs_create_link(&per_cpu(mce_sysdev, cpu).kobj,
+		err = sysfs_create_link(&per_cpu(mce_device, cpu).kobj,
 					b->kobj, name);
 		if (err)
 			goto out;
@@ -558,7 +553,6 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank)
 
 		goto out;
 	}
-#endif
 
 	b = kzalloc(sizeof(struct threshold_bank), GFP_KERNEL);
 	if (!b) {
@@ -571,7 +565,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank)
 		goto out;
 	}
 
-	b->kobj = kobject_create_and_add(name, &per_cpu(mce_sysdev, cpu).kobj);
+	b->kobj = kobject_create_and_add(name, &per_cpu(mce_device, cpu).kobj);
 	if (!b->kobj)
 		goto out_free;
 
@@ -591,7 +585,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank)
 		if (i == cpu)
 			continue;
 
-		err = sysfs_create_link(&per_cpu(mce_sysdev, i).kobj,
+		err = sysfs_create_link(&per_cpu(mce_device, i).kobj,
 					b->kobj, name);
 		if (err)
 			goto out;
@@ -669,7 +663,7 @@ static void threshold_remove_bank(unsigned int cpu, int bank)
 #ifdef CONFIG_SMP
 	/* sibling symlink */
 	if (shared_bank[bank] && b->blocks->cpu != cpu) {
-		sysfs_remove_link(&per_cpu(mce_sysdev, cpu).kobj, name);
+		sysfs_remove_link(&per_cpu(mce_device, cpu).kobj, name);
 		per_cpu(threshold_banks, cpu)[bank] = NULL;
 
 		return;
@@ -681,7 +675,7 @@ static void threshold_remove_bank(unsigned int cpu, int bank)
 		if (i == cpu)
 			continue;
 
-		sysfs_remove_link(&per_cpu(mce_sysdev, i).kobj, name);
+		sysfs_remove_link(&per_cpu(mce_device, i).kobj, name);
 		per_cpu(threshold_banks, i)[bank] = NULL;
 	}
 
diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c
index 787e06c..67bb17a 100644
--- a/arch/x86/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c
@@ -19,7 +19,6 @@
 #include <linux/kernel.h>
 #include <linux/percpu.h>
 #include <linux/export.h>
-#include <linux/sysdev.h>
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/smp.h>
@@ -69,16 +68,16 @@ static atomic_t therm_throt_en	= ATOMIC_INIT(0);
 static u32 lvtthmr_init __read_mostly;
 
 #ifdef CONFIG_SYSFS
-#define define_therm_throt_sysdev_one_ro(_name)				\
-	static SYSDEV_ATTR(_name, 0444,					\
-			   therm_throt_sysdev_show_##_name,		\
+#define define_therm_throt_device_one_ro(_name)				\
+	static DEVICE_ATTR(_name, 0444,					\
+			   therm_throt_device_show_##_name,		\
 				   NULL)				\
 
-#define define_therm_throt_sysdev_show_func(event, name)		\
+#define define_therm_throt_device_show_func(event, name)		\
 									\
-static ssize_t therm_throt_sysdev_show_##event##_##name(		\
-			struct sys_device *dev,				\
-			struct sysdev_attribute *attr,			\
+static ssize_t therm_throt_device_show_##event##_##name(		\
+			struct device *dev,				\
+			struct device_attribute *attr,			\
 			char *buf)					\
 {									\
 	unsigned int cpu = dev->id;					\
@@ -95,20 +94,20 @@ static ssize_t therm_throt_sysdev_show_##event##_##name(		\
 	return ret;							\
 }
 
-define_therm_throt_sysdev_show_func(core_throttle, count);
-define_therm_throt_sysdev_one_ro(core_throttle_count);
+define_therm_throt_device_show_func(core_throttle, count);
+define_therm_throt_device_one_ro(core_throttle_count);
 
-define_therm_throt_sysdev_show_func(core_power_limit, count);
-define_therm_throt_sysdev_one_ro(core_power_limit_count);
+define_therm_throt_device_show_func(core_power_limit, count);
+define_therm_throt_device_one_ro(core_power_limit_count);
 
-define_therm_throt_sysdev_show_func(package_throttle, count);
-define_therm_throt_sysdev_one_ro(package_throttle_count);
+define_therm_throt_device_show_func(package_throttle, count);
+define_therm_throt_device_one_ro(package_throttle_count);
 
-define_therm_throt_sysdev_show_func(package_power_limit, count);
-define_therm_throt_sysdev_one_ro(package_power_limit_count);
+define_therm_throt_device_show_func(package_power_limit, count);
+define_therm_throt_device_one_ro(package_power_limit_count);
 
 static struct attribute *thermal_throttle_attrs[] = {
-	&attr_core_throttle_count.attr,
+	&dev_attr_core_throttle_count.attr,
 	NULL
 };
 
@@ -223,36 +222,36 @@ static int thresh_event_valid(int event)
 
 #ifdef CONFIG_SYSFS
 /* Add/Remove thermal_throttle interface for CPU device: */
-static __cpuinit int thermal_throttle_add_dev(struct sys_device *sys_dev,
+static __cpuinit int thermal_throttle_add_dev(struct device *dev,
 				unsigned int cpu)
 {
 	int err;
 	struct cpuinfo_x86 *c = &cpu_data(cpu);
 
-	err = sysfs_create_group(&sys_dev->kobj, &thermal_attr_group);
+	err = sysfs_create_group(&dev->kobj, &thermal_attr_group);
 	if (err)
 		return err;
 
 	if (cpu_has(c, X86_FEATURE_PLN))
-		err = sysfs_add_file_to_group(&sys_dev->kobj,
-					      &attr_core_power_limit_count.attr,
+		err = sysfs_add_file_to_group(&dev->kobj,
+					      &dev_attr_core_power_limit_count.attr,
 					      thermal_attr_group.name);
 	if (cpu_has(c, X86_FEATURE_PTS)) {
-		err = sysfs_add_file_to_group(&sys_dev->kobj,
-					      &attr_package_throttle_count.attr,
+		err = sysfs_add_file_to_group(&dev->kobj,
+					      &dev_attr_package_throttle_count.attr,
 					      thermal_attr_group.name);
 		if (cpu_has(c, X86_FEATURE_PLN))
-			err = sysfs_add_file_to_group(&sys_dev->kobj,
-					&attr_package_power_limit_count.attr,
+			err = sysfs_add_file_to_group(&dev->kobj,
+					&dev_attr_package_power_limit_count.attr,
 					thermal_attr_group.name);
 	}
 
 	return err;
 }
 
-static __cpuinit void thermal_throttle_remove_dev(struct sys_device *sys_dev)
+static __cpuinit void thermal_throttle_remove_dev(struct device *dev)
 {
-	sysfs_remove_group(&sys_dev->kobj, &thermal_attr_group);
+	sysfs_remove_group(&dev->kobj, &thermal_attr_group);
 }
 
 /* Mutex protecting device creation against CPU hotplug: */
@@ -265,16 +264,16 @@ thermal_throttle_cpu_callback(struct notifier_block *nfb,
 			      void *hcpu)
 {
 	unsigned int cpu = (unsigned long)hcpu;
-	struct sys_device *sys_dev;
+	struct device *dev;
 	int err = 0;
 
-	sys_dev = get_cpu_sysdev(cpu);
+	dev = get_cpu_device(cpu);
 
 	switch (action) {
 	case CPU_UP_PREPARE:
 	case CPU_UP_PREPARE_FROZEN:
 		mutex_lock(&therm_cpu_lock);
-		err = thermal_throttle_add_dev(sys_dev, cpu);
+		err = thermal_throttle_add_dev(dev, cpu);
 		mutex_unlock(&therm_cpu_lock);
 		WARN_ON(err);
 		break;
@@ -283,7 +282,7 @@ thermal_throttle_cpu_callback(struct notifier_block *nfb,
 	case CPU_DEAD:
 	case CPU_DEAD_FROZEN:
 		mutex_lock(&therm_cpu_lock);
-		thermal_throttle_remove_dev(sys_dev);
+		thermal_throttle_remove_dev(dev);
 		mutex_unlock(&therm_cpu_lock);
 		break;
 	}
@@ -310,7 +309,7 @@ static __init int thermal_throttle_init_device(void)
 #endif
 	/* connect live CPUs to sysfs */
 	for_each_online_cpu(cpu) {
-		err = thermal_throttle_add_dev(get_cpu_sysdev(cpu), cpu);
+		err = thermal_throttle_add_dev(get_cpu_device(cpu), cpu);
 		WARN_ON(err);
 	}
 #ifdef CONFIG_HOTPLUG_CPU
@@ -323,17 +322,6 @@ device_initcall(thermal_throttle_init_device);
 
 #endif /* CONFIG_SYSFS */
 
-/*
- * Set up the most two significant bit to notify mce log that this thermal
- * event type.
- * This is a temp solution. May be changed in the future with mce log
- * infrasture.
- */
-#define CORE_THROTTLED		(0)
-#define CORE_POWER_LIMIT	((__u64)1 << 62)
-#define PACKAGE_THROTTLED	((__u64)2 << 62)
-#define PACKAGE_POWER_LIMIT	((__u64)3 << 62)
-
 static void notify_thresholds(__u64 msr_val)
 {
 	/* check whether the interrupt handler is defined;
@@ -363,27 +351,23 @@ static void intel_thermal_interrupt(void)
 	if (therm_throt_process(msr_val & THERM_STATUS_PROCHOT,
 				THERMAL_THROTTLING_EVENT,
 				CORE_LEVEL) != 0)
-		mce_log_therm_throt_event(CORE_THROTTLED | msr_val);
+		mce_log_therm_throt_event(msr_val);
 
 	if (this_cpu_has(X86_FEATURE_PLN))
-		if (therm_throt_process(msr_val & THERM_STATUS_POWER_LIMIT,
+		therm_throt_process(msr_val & THERM_STATUS_POWER_LIMIT,
 					POWER_LIMIT_EVENT,
-					CORE_LEVEL) != 0)
-			mce_log_therm_throt_event(CORE_POWER_LIMIT | msr_val);
+					CORE_LEVEL);
 
 	if (this_cpu_has(X86_FEATURE_PTS)) {
 		rdmsrl(MSR_IA32_PACKAGE_THERM_STATUS, msr_val);
-		if (therm_throt_process(msr_val & PACKAGE_THERM_STATUS_PROCHOT,
+		therm_throt_process(msr_val & PACKAGE_THERM_STATUS_PROCHOT,
 					THERMAL_THROTTLING_EVENT,
-					PACKAGE_LEVEL) != 0)
-			mce_log_therm_throt_event(PACKAGE_THROTTLED | msr_val);
+					PACKAGE_LEVEL);
 		if (this_cpu_has(X86_FEATURE_PLN))
-			if (therm_throt_process(msr_val &
+			therm_throt_process(msr_val &
 					PACKAGE_THERM_STATUS_POWER_LIMIT,
 					POWER_LIMIT_EVENT,
-					PACKAGE_LEVEL) != 0)
-				mce_log_therm_throt_event(PACKAGE_POWER_LIMIT
-							  | msr_val);
+					PACKAGE_LEVEL);
 	}
 }
 
@@ -397,8 +381,8 @@ static void (*smp_thermal_vector)(void) = unexpected_thermal_interrupt;
 
 asmlinkage void smp_thermal_interrupt(struct pt_regs *regs)
 {
-	exit_idle();
 	irq_enter();
+	exit_idle();
 	inc_irq_stat(irq_thermal_count);
 	smp_thermal_vector();
 	irq_exit();
diff --git a/arch/x86/kernel/cpu/mcheck/threshold.c b/arch/x86/kernel/cpu/mcheck/threshold.c
index d746df2..aa578ca 100644
--- a/arch/x86/kernel/cpu/mcheck/threshold.c
+++ b/arch/x86/kernel/cpu/mcheck/threshold.c
@@ -19,8 +19,8 @@ void (*mce_threshold_vector)(void) = default_threshold_interrupt;
 
 asmlinkage void smp_threshold_interrupt(void)
 {
-	exit_idle();
 	irq_enter();
+	exit_idle();
 	inc_irq_stat(irq_threshold_count);
 	mce_threshold_vector();
 	irq_exit();
diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index a71efcdb..97b2635 100644
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -547,6 +547,7 @@ static void generic_get_mtrr(unsigned int reg, unsigned long *base,
 
 		if (tmp != mask_lo) {
 			printk(KERN_WARNING "mtrr: your BIOS has configured an incorrect mask, fixing it.\n");
+			add_taint(TAINT_FIRMWARE_WORKAROUND);
 			mask_lo = tmp;
 		}
 	}
@@ -693,6 +694,7 @@ static void prepare_set(void) __acquires(set_atomicity_lock)
 
 	/* Disable MTRRs, and set the default type to uncached */
 	mtrr_wrmsr(MSR_MTRRdefType, deftype_lo & ~0xcff, deftype_hi);
+	wbinvd();
 }
 
 static void post_set(void) __releases(set_atomicity_lock)
diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c
index 6408910..5adce10 100644
--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -312,12 +312,8 @@ int x86_setup_perfctr(struct perf_event *event)
 			return -EOPNOTSUPP;
 	}
 
-	/*
-	 * Do not allow config1 (extended registers) to propagate,
-	 * there's no sane user-space generalization yet:
-	 */
 	if (attr->type == PERF_TYPE_RAW)
-		return 0;
+		return x86_pmu_extra_regs(event->attr.config, event);
 
 	if (attr->type == PERF_TYPE_HW_CACHE)
 		return set_ext_hw_attr(hwc, event);
@@ -488,18 +484,195 @@ static inline int is_x86_event(struct perf_event *event)
 	return event->pmu == &pmu;
 }
 
+/*
+ * Event scheduler state:
+ *
+ * Assign events iterating over all events and counters, beginning
+ * with events with least weights first. Keep the current iterator
+ * state in struct sched_state.
+ */
+struct sched_state {
+	int	weight;
+	int	event;		/* event index */
+	int	counter;	/* counter index */
+	int	unassigned;	/* number of events to be assigned left */
+	unsigned long used[BITS_TO_LONGS(X86_PMC_IDX_MAX)];
+};
+
+/* Total max is X86_PMC_IDX_MAX, but we are O(n!) limited */
+#define	SCHED_STATES_MAX	2
+
+struct perf_sched {
+	int			max_weight;
+	int			max_events;
+	struct event_constraint	**constraints;
+	struct sched_state	state;
+	int			saved_states;
+	struct sched_state	saved[SCHED_STATES_MAX];
+};
+
+/*
+ * Initialize interator that runs through all events and counters.
+ */
+static void perf_sched_init(struct perf_sched *sched, struct event_constraint **c,
+			    int num, int wmin, int wmax)
+{
+	int idx;
+
+	memset(sched, 0, sizeof(*sched));
+	sched->max_events	= num;
+	sched->max_weight	= wmax;
+	sched->constraints	= c;
+
+	for (idx = 0; idx < num; idx++) {
+		if (c[idx]->weight == wmin)
+			break;
+	}
+
+	sched->state.event	= idx;		/* start with min weight */
+	sched->state.weight	= wmin;
+	sched->state.unassigned	= num;
+}
+
+static void perf_sched_save_state(struct perf_sched *sched)
+{
+	if (WARN_ON_ONCE(sched->saved_states >= SCHED_STATES_MAX))
+		return;
+
+	sched->saved[sched->saved_states] = sched->state;
+	sched->saved_states++;
+}
+
+static bool perf_sched_restore_state(struct perf_sched *sched)
+{
+	if (!sched->saved_states)
+		return false;
+
+	sched->saved_states--;
+	sched->state = sched->saved[sched->saved_states];
+
+	/* continue with next counter: */
+	clear_bit(sched->state.counter++, sched->state.used);
+
+	return true;
+}
+
+/*
+ * Select a counter for the current event to schedule. Return true on
+ * success.
+ */
+static bool __perf_sched_find_counter(struct perf_sched *sched)
+{
+	struct event_constraint *c;
+	int idx;
+
+	if (!sched->state.unassigned)
+		return false;
+
+	if (sched->state.event >= sched->max_events)
+		return false;
+
+	c = sched->constraints[sched->state.event];
+
+	/* Prefer fixed purpose counters */
+	if (x86_pmu.num_counters_fixed) {
+		idx = X86_PMC_IDX_FIXED;
+		for_each_set_bit_cont(idx, c->idxmsk, X86_PMC_IDX_MAX) {
+			if (!__test_and_set_bit(idx, sched->state.used))
+				goto done;
+		}
+	}
+	/* Grab the first unused counter starting with idx */
+	idx = sched->state.counter;
+	for_each_set_bit_cont(idx, c->idxmsk, X86_PMC_IDX_FIXED) {
+		if (!__test_and_set_bit(idx, sched->state.used))
+			goto done;
+	}
+
+	return false;
+
+done:
+	sched->state.counter = idx;
+
+	if (c->overlap)
+		perf_sched_save_state(sched);
+
+	return true;
+}
+
+static bool perf_sched_find_counter(struct perf_sched *sched)
+{
+	while (!__perf_sched_find_counter(sched)) {
+		if (!perf_sched_restore_state(sched))
+			return false;
+	}
+
+	return true;
+}
+
+/*
+ * Go through all unassigned events and find the next one to schedule.
+ * Take events with the least weight first. Return true on success.
+ */
+static bool perf_sched_next_event(struct perf_sched *sched)
+{
+	struct event_constraint *c;
+
+	if (!sched->state.unassigned || !--sched->state.unassigned)
+		return false;
+
+	do {
+		/* next event */
+		sched->state.event++;
+		if (sched->state.event >= sched->max_events) {
+			/* next weight */
+			sched->state.event = 0;
+			sched->state.weight++;
+			if (sched->state.weight > sched->max_weight)
+				return false;
+		}
+		c = sched->constraints[sched->state.event];
+	} while (c->weight != sched->state.weight);
+
+	sched->state.counter = 0;	/* start with first counter */
+
+	return true;
+}
+
+/*
+ * Assign a counter for each event.
+ */
+static int perf_assign_events(struct event_constraint **constraints, int n,
+			      int wmin, int wmax, int *assign)
+{
+	struct perf_sched sched;
+
+	perf_sched_init(&sched, constraints, n, wmin, wmax);
+
+	do {
+		if (!perf_sched_find_counter(&sched))
+			break;	/* failed */
+		if (assign)
+			assign[sched.state.event] = sched.state.counter;
+	} while (perf_sched_next_event(&sched));
+
+	return sched.state.unassigned;
+}
+
 int x86_schedule_events(struct cpu_hw_events *cpuc, int n, int *assign)
 {
 	struct event_constraint *c, *constraints[X86_PMC_IDX_MAX];
 	unsigned long used_mask[BITS_TO_LONGS(X86_PMC_IDX_MAX)];
-	int i, j, w, wmax, num = 0;
+	int i, wmin, wmax, num = 0;
 	struct hw_perf_event *hwc;
 
 	bitmap_zero(used_mask, X86_PMC_IDX_MAX);
 
-	for (i = 0; i < n; i++) {
+	for (i = 0, wmin = X86_PMC_IDX_MAX, wmax = 0; i < n; i++) {
 		c = x86_pmu.get_event_constraints(cpuc, cpuc->event_list[i]);
 		constraints[i] = c;
+		wmin = min(wmin, c->weight);
+		wmax = max(wmax, c->weight);
 	}
 
 	/*
@@ -525,59 +698,11 @@ int x86_schedule_events(struct cpu_hw_events *cpuc, int n, int *assign)
 		if (assign)
 			assign[i] = hwc->idx;
 	}
-	if (i == n)
-		goto done;
-
-	/*
-	 * begin slow path
-	 */
-
-	bitmap_zero(used_mask, X86_PMC_IDX_MAX);
-
-	/*
-	 * weight = number of possible counters
-	 *
-	 * 1    = most constrained, only works on one counter
-	 * wmax = least constrained, works on any counter
-	 *
-	 * assign events to counters starting with most
-	 * constrained events.
-	 */
-	wmax = x86_pmu.num_counters;
-
-	/*
-	 * when fixed event counters are present,
-	 * wmax is incremented by 1 to account
-	 * for one more choice
-	 */
-	if (x86_pmu.num_counters_fixed)
-		wmax++;
-
-	for (w = 1, num = n; num && w <= wmax; w++) {
-		/* for each event */
-		for (i = 0; num && i < n; i++) {
-			c = constraints[i];
-			hwc = &cpuc->event_list[i]->hw;
-
-			if (c->weight != w)
-				continue;
 
-			for_each_set_bit(j, c->idxmsk, X86_PMC_IDX_MAX) {
-				if (!test_bit(j, used_mask))
-					break;
-			}
-
-			if (j == X86_PMC_IDX_MAX)
-				break;
+	/* slow path */
+	if (i != n)
+		num = perf_assign_events(constraints, n, wmin, wmax, assign);
 
-			__set_bit(j, used_mask);
-
-			if (assign)
-				assign[i] = j;
-			num--;
-		}
-	}
-done:
 	/*
 	 * scheduling failed or is just a simulation,
 	 * free resources if necessary
@@ -588,7 +713,7 @@ done:
 				x86_pmu.put_event_constraints(cpuc, cpuc->event_list[i]);
 		}
 	}
-	return num ? -ENOSPC : 0;
+	return num ? -EINVAL : 0;
 }
 
 /*
@@ -607,7 +732,7 @@ static int collect_events(struct cpu_hw_events *cpuc, struct perf_event *leader,
 
 	if (is_x86_event(leader)) {
 		if (n >= max_count)
-			return -ENOSPC;
+			return -EINVAL;
 		cpuc->event_list[n] = leader;
 		n++;
 	}
@@ -620,7 +745,7 @@ static int collect_events(struct cpu_hw_events *cpuc, struct perf_event *leader,
 			continue;
 
 		if (n >= max_count)
-			return -ENOSPC;
+			return -EINVAL;
 
 		cpuc->event_list[n] = event;
 		n++;
@@ -1123,6 +1248,7 @@ static void __init pmu_check_apic(void)
 
 static int __init init_hw_perf_events(void)
 {
+	struct x86_pmu_quirk *quirk;
 	struct event_constraint *c;
 	int err;
 
@@ -1151,8 +1277,8 @@ static int __init init_hw_perf_events(void)
 
 	pr_cont("%s PMU driver.\n", x86_pmu.name);
 
-	if (x86_pmu.quirks)
-		x86_pmu.quirks();
+	for (quirk = x86_pmu.quirks; quirk; quirk = quirk->next)
+		quirk->func();
 
 	if (x86_pmu.num_counters > X86_PMC_MAX_GENERIC) {
 		WARN(1, KERN_ERR "hw perf events %d > max(%d), clipping!",
@@ -1175,12 +1301,18 @@ static int __init init_hw_perf_events(void)
 
 	unconstrained = (struct event_constraint)
 		__EVENT_CONSTRAINT(0, (1ULL << x86_pmu.num_counters) - 1,
-				   0, x86_pmu.num_counters);
+				   0, x86_pmu.num_counters, 0);
 
 	if (x86_pmu.event_constraints) {
+		/*
+		 * event on fixed counter2 (REF_CYCLES) only works on this
+		 * counter, so do not extend mask to generic counters
+		 */
 		for_each_event_constraint(c, x86_pmu.event_constraints) {
-			if (c->cmask != X86_RAW_EVENT_MASK)
+			if (c->cmask != X86_RAW_EVENT_MASK
+			    || c->idxmsk64 == X86_PMC_MSK_FIXED_REF_CYCLES) {
 				continue;
+			}
 
 			c->idxmsk64 |= (1ULL << x86_pmu.num_counters) - 1;
 			c->weight += x86_pmu.num_counters;
@@ -1316,7 +1448,7 @@ static int validate_event(struct perf_event *event)
 	c = x86_pmu.get_event_constraints(fake_cpuc, event);
 
 	if (!c || !c->weight)
-		ret = -ENOSPC;
+		ret = -EINVAL;
 
 	if (x86_pmu.put_event_constraints)
 		x86_pmu.put_event_constraints(fake_cpuc, event);
@@ -1341,7 +1473,7 @@ static int validate_group(struct perf_event *event)
 {
 	struct perf_event *leader = event->group_leader;
 	struct cpu_hw_events *fake_cpuc;
-	int ret = -ENOSPC, n;
+	int ret = -EINVAL, n;
 
 	fake_cpuc = allocate_fake_cpuc();
 	if (IS_ERR(fake_cpuc))
@@ -1570,3 +1702,15 @@ unsigned long perf_misc_flags(struct pt_regs *regs)
 
 	return misc;
 }
+
+void perf_get_x86_pmu_capability(struct x86_pmu_capability *cap)
+{
+	cap->version		= x86_pmu.version;
+	cap->num_counters_gp	= x86_pmu.num_counters;
+	cap->num_counters_fixed	= x86_pmu.num_counters_fixed;
+	cap->bit_width_gp	= x86_pmu.cntval_bits;
+	cap->bit_width_fixed	= x86_pmu.cntval_bits;
+	cap->events_mask	= (unsigned int)x86_pmu.events_maskl;
+	cap->events_mask_len	= x86_pmu.events_mask_len;
+}
+EXPORT_SYMBOL_GPL(perf_get_x86_pmu_capability);
diff --git a/arch/x86/kernel/cpu/perf_event.h b/arch/x86/kernel/cpu/perf_event.h
index b9698d4..8944062 100644
--- a/arch/x86/kernel/cpu/perf_event.h
+++ b/arch/x86/kernel/cpu/perf_event.h
@@ -45,6 +45,7 @@ struct event_constraint {
 	u64	code;
 	u64	cmask;
 	int	weight;
+	int	overlap;
 };
 
 struct amd_nb {
@@ -151,15 +152,40 @@ struct cpu_hw_events {
 	void				*kfree_on_online;
 };
 
-#define __EVENT_CONSTRAINT(c, n, m, w) {\
+#define __EVENT_CONSTRAINT(c, n, m, w, o) {\
 	{ .idxmsk64 = (n) },		\
 	.code = (c),			\
 	.cmask = (m),			\
 	.weight = (w),			\
+	.overlap = (o),			\
 }
 
 #define EVENT_CONSTRAINT(c, n, m)	\
-	__EVENT_CONSTRAINT(c, n, m, HWEIGHT(n))
+	__EVENT_CONSTRAINT(c, n, m, HWEIGHT(n), 0)
+
+/*
+ * The overlap flag marks event constraints with overlapping counter
+ * masks. This is the case if the counter mask of such an event is not
+ * a subset of any other counter mask of a constraint with an equal or
+ * higher weight, e.g.:
+ *
+ *  c_overlaps = EVENT_CONSTRAINT_OVERLAP(0, 0x09, 0);
+ *  c_another1 = EVENT_CONSTRAINT(0, 0x07, 0);
+ *  c_another2 = EVENT_CONSTRAINT(0, 0x38, 0);
+ *
+ * The event scheduler may not select the correct counter in the first
+ * cycle because it needs to know which subsequent events will be
+ * scheduled. It may fail to schedule the events then. So we set the
+ * overlap flag for such constraints to give the scheduler a hint which
+ * events to select for counter rescheduling.
+ *
+ * Care must be taken as the rescheduling algorithm is O(n!) which
+ * will increase scheduling cycles for an over-commited system
+ * dramatically.  The number of such EVENT_CONSTRAINT_OVERLAP() macros
+ * and its counter masks must be kept at a minimum.
+ */
+#define EVENT_CONSTRAINT_OVERLAP(c, n, m)	\
+	__EVENT_CONSTRAINT(c, n, m, HWEIGHT(n), 1)
 
 /*
  * Constraint on the Event code.
@@ -235,6 +261,11 @@ union perf_capabilities {
 	u64	capabilities;
 };
 
+struct x86_pmu_quirk {
+	struct x86_pmu_quirk *next;
+	void (*func)(void);
+};
+
 /*
  * struct x86_pmu - generic x86 pmu
  */
@@ -259,6 +290,11 @@ struct x86_pmu {
 	int		num_counters_fixed;
 	int		cntval_bits;
 	u64		cntval_mask;
+	union {
+			unsigned long events_maskl;
+			unsigned long events_mask[BITS_TO_LONGS(ARCH_PERFMON_EVENTS_COUNT)];
+	};
+	int		events_mask_len;
 	int		apic;
 	u64		max_period;
 	struct event_constraint *
@@ -268,7 +304,7 @@ struct x86_pmu {
 	void		(*put_event_constraints)(struct cpu_hw_events *cpuc,
 						 struct perf_event *event);
 	struct event_constraint *event_constraints;
-	void		(*quirks)(void);
+	struct x86_pmu_quirk *quirks;
 	int		perfctr_second_write;
 
 	int		(*cpu_prepare)(int cpu);
@@ -309,6 +345,15 @@ struct x86_pmu {
 	struct perf_guest_switch_msr *(*guest_get_msrs)(int *nr);
 };
 
+#define x86_add_quirk(func_)						\
+do {									\
+	static struct x86_pmu_quirk __quirk __initdata = {		\
+		.func = func_,						\
+	};								\
+	__quirk.next = x86_pmu.quirks;					\
+	x86_pmu.quirks = &__quirk;					\
+} while (0)
+
 #define ERF_NO_HT_SHARING	1
 #define ERF_HAS_RSP_1		2
 
diff --git a/arch/x86/kernel/cpu/perf_event_amd.c b/arch/x86/kernel/cpu/perf_event_amd.c
index aeefd45..0397b23 100644
--- a/arch/x86/kernel/cpu/perf_event_amd.c
+++ b/arch/x86/kernel/cpu/perf_event_amd.c
@@ -492,7 +492,7 @@ static __initconst const struct x86_pmu amd_pmu = {
 static struct event_constraint amd_f15_PMC0  = EVENT_CONSTRAINT(0, 0x01, 0);
 static struct event_constraint amd_f15_PMC20 = EVENT_CONSTRAINT(0, 0x07, 0);
 static struct event_constraint amd_f15_PMC3  = EVENT_CONSTRAINT(0, 0x08, 0);
-static struct event_constraint amd_f15_PMC30 = EVENT_CONSTRAINT(0, 0x09, 0);
+static struct event_constraint amd_f15_PMC30 = EVENT_CONSTRAINT_OVERLAP(0, 0x09, 0);
 static struct event_constraint amd_f15_PMC50 = EVENT_CONSTRAINT(0, 0x3F, 0);
 static struct event_constraint amd_f15_PMC53 = EVENT_CONSTRAINT(0, 0x38, 0);
 
diff --git a/arch/x86/kernel/cpu/perf_event_amd_ibs.c b/arch/x86/kernel/cpu/perf_event_amd_ibs.c
index ab6343d..3b8a2d3 100644
--- a/arch/x86/kernel/cpu/perf_event_amd_ibs.c
+++ b/arch/x86/kernel/cpu/perf_event_amd_ibs.c
@@ -199,8 +199,7 @@ static int force_ibs_eilvt_setup(void)
 		goto out;
 	}
 
-	pr_err(FW_BUG "using offset %d for IBS interrupts\n", offset);
-	pr_err(FW_BUG "workaround enabled for IBS LVT offset\n");
+	pr_info("IBS: LVT offset %d assigned\n", offset);
 
 	return 0;
 out:
@@ -265,19 +264,23 @@ perf_ibs_cpu_notifier(struct notifier_block *self, unsigned long action, void *h
 static __init int amd_ibs_init(void)
 {
 	u32 caps;
-	int ret;
+	int ret = -EINVAL;
 
 	caps = __get_ibs_caps();
 	if (!caps)
 		return -ENODEV;	/* ibs not supported by the cpu */
 
-	if (!ibs_eilvt_valid()) {
-		ret = force_ibs_eilvt_setup();
-		if (ret) {
-			pr_err("Failed to setup IBS, %d\n", ret);
-			return ret;
-		}
-	}
+	/*
+	 * Force LVT offset assignment for family 10h: The offsets are
+	 * not assigned by the BIOS for this family, so the OS is
+	 * responsible for doing it. If the OS assignment fails, fall
+	 * back to BIOS settings and try to setup this.
+	 */
+	if (boot_cpu_data.x86 == 0x10)
+		force_ibs_eilvt_setup();
+
+	if (!ibs_eilvt_valid())
+		goto out;
 
 	get_online_cpus();
 	ibs_caps = caps;
@@ -287,7 +290,11 @@ static __init int amd_ibs_init(void)
 	smp_call_function(setup_APIC_ibs, NULL, 1);
 	put_online_cpus();
 
-	return perf_event_ibs_init();
+	ret = perf_event_ibs_init();
+out:
+	if (ret)
+		pr_err("Failed to setup IBS, %d\n", ret);
+	return ret;
 }
 
 /* Since we need the pci subsystem to init ibs we can't do this earlier: */
diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c
index 2be5ebe..3bd37bd 100644
--- a/arch/x86/kernel/cpu/perf_event_intel.c
+++ b/arch/x86/kernel/cpu/perf_event_intel.c
@@ -28,6 +28,7 @@ static u64 intel_perfmon_event_map[PERF_COUNT_HW_MAX] __read_mostly =
   [PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= 0x00c4,
   [PERF_COUNT_HW_BRANCH_MISSES]		= 0x00c5,
   [PERF_COUNT_HW_BUS_CYCLES]		= 0x013c,
+  [PERF_COUNT_HW_REF_CPU_CYCLES]	= 0x0300, /* pseudo-encoding */
 };
 
 static struct event_constraint intel_core_event_constraints[] __read_mostly =
@@ -45,12 +46,7 @@ static struct event_constraint intel_core2_event_constraints[] __read_mostly =
 {
 	FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */
 	FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */
-	/*
-	 * Core2 has Fixed Counter 2 listed as CPU_CLK_UNHALTED.REF and event
-	 * 0x013c as CPU_CLK_UNHALTED.BUS and specifies there is a fixed
-	 * ratio between these counters.
-	 */
-	/* FIXED_EVENT_CONSTRAINT(0x013c, 2),  CPU_CLK_UNHALTED.REF */
+	FIXED_EVENT_CONSTRAINT(0x0300, 2), /* CPU_CLK_UNHALTED.REF */
 	INTEL_EVENT_CONSTRAINT(0x10, 0x1), /* FP_COMP_OPS_EXE */
 	INTEL_EVENT_CONSTRAINT(0x11, 0x2), /* FP_ASSIST */
 	INTEL_EVENT_CONSTRAINT(0x12, 0x2), /* MUL */
@@ -68,7 +64,7 @@ static struct event_constraint intel_nehalem_event_constraints[] __read_mostly =
 {
 	FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */
 	FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */
-	/* FIXED_EVENT_CONSTRAINT(0x013c, 2), CPU_CLK_UNHALTED.REF */
+	FIXED_EVENT_CONSTRAINT(0x0300, 2), /* CPU_CLK_UNHALTED.REF */
 	INTEL_EVENT_CONSTRAINT(0x40, 0x3), /* L1D_CACHE_LD */
 	INTEL_EVENT_CONSTRAINT(0x41, 0x3), /* L1D_CACHE_ST */
 	INTEL_EVENT_CONSTRAINT(0x42, 0x3), /* L1D_CACHE_LOCK */
@@ -90,7 +86,7 @@ static struct event_constraint intel_westmere_event_constraints[] __read_mostly
 {
 	FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */
 	FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */
-	/* FIXED_EVENT_CONSTRAINT(0x013c, 2), CPU_CLK_UNHALTED.REF */
+	FIXED_EVENT_CONSTRAINT(0x0300, 2), /* CPU_CLK_UNHALTED.REF */
 	INTEL_EVENT_CONSTRAINT(0x51, 0x3), /* L1D */
 	INTEL_EVENT_CONSTRAINT(0x60, 0x1), /* OFFCORE_REQUESTS_OUTSTANDING */
 	INTEL_EVENT_CONSTRAINT(0x63, 0x3), /* CACHE_LOCK_CYCLES */
@@ -102,7 +98,7 @@ static struct event_constraint intel_snb_event_constraints[] __read_mostly =
 {
 	FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */
 	FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */
-	/* FIXED_EVENT_CONSTRAINT(0x013c, 2), CPU_CLK_UNHALTED.REF */
+	FIXED_EVENT_CONSTRAINT(0x0300, 2), /* CPU_CLK_UNHALTED.REF */
 	INTEL_EVENT_CONSTRAINT(0x48, 0x4), /* L1D_PEND_MISS.PENDING */
 	INTEL_UEVENT_CONSTRAINT(0x01c0, 0x2), /* INST_RETIRED.PREC_DIST */
 	INTEL_EVENT_CONSTRAINT(0xcd, 0x8), /* MEM_TRANS_RETIRED.LOAD_LATENCY */
@@ -125,7 +121,7 @@ static struct event_constraint intel_gen_event_constraints[] __read_mostly =
 {
 	FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */
 	FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */
-	/* FIXED_EVENT_CONSTRAINT(0x013c, 2), CPU_CLK_UNHALTED.REF */
+	FIXED_EVENT_CONSTRAINT(0x0300, 2), /* CPU_CLK_UNHALTED.REF */
 	EVENT_CONSTRAINT_END
 };
 
@@ -1169,7 +1165,7 @@ again:
 		 */
 		c = &unconstrained;
 	} else if (intel_try_alt_er(event, orig_idx)) {
-		raw_spin_unlock(&era->lock);
+		raw_spin_unlock_irqrestore(&era->lock, flags);
 		goto again;
 	}
 	raw_spin_unlock_irqrestore(&era->lock, flags);
@@ -1519,7 +1515,7 @@ static __initconst const struct x86_pmu intel_pmu = {
 	.guest_get_msrs		= intel_guest_get_msrs,
 };
 
-static void intel_clovertown_quirks(void)
+static __init void intel_clovertown_quirk(void)
 {
 	/*
 	 * PEBS is unreliable due to:
@@ -1545,12 +1541,60 @@ static void intel_clovertown_quirks(void)
 	x86_pmu.pebs_constraints = NULL;
 }
 
+static __init void intel_sandybridge_quirk(void)
+{
+	printk(KERN_WARNING "PEBS disabled due to CPU errata.\n");
+	x86_pmu.pebs = 0;
+	x86_pmu.pebs_constraints = NULL;
+}
+
+static const struct { int id; char *name; } intel_arch_events_map[] __initconst = {
+	{ PERF_COUNT_HW_CPU_CYCLES, "cpu cycles" },
+	{ PERF_COUNT_HW_INSTRUCTIONS, "instructions" },
+	{ PERF_COUNT_HW_BUS_CYCLES, "bus cycles" },
+	{ PERF_COUNT_HW_CACHE_REFERENCES, "cache references" },
+	{ PERF_COUNT_HW_CACHE_MISSES, "cache misses" },
+	{ PERF_COUNT_HW_BRANCH_INSTRUCTIONS, "branch instructions" },
+	{ PERF_COUNT_HW_BRANCH_MISSES, "branch misses" },
+};
+
+static __init void intel_arch_events_quirk(void)
+{
+	int bit;
+
+	/* disable event that reported as not presend by cpuid */
+	for_each_set_bit(bit, x86_pmu.events_mask, ARRAY_SIZE(intel_arch_events_map)) {
+		intel_perfmon_event_map[intel_arch_events_map[bit].id] = 0;
+		printk(KERN_WARNING "CPUID marked event: \'%s\' unavailable\n",
+				intel_arch_events_map[bit].name);
+	}
+}
+
+static __init void intel_nehalem_quirk(void)
+{
+	union cpuid10_ebx ebx;
+
+	ebx.full = x86_pmu.events_maskl;
+	if (ebx.split.no_branch_misses_retired) {
+		/*
+		 * Erratum AAJ80 detected, we work it around by using
+		 * the BR_MISP_EXEC.ANY event. This will over-count
+		 * branch-misses, but it's still much better than the
+		 * architectural event which is often completely bogus:
+		 */
+		intel_perfmon_event_map[PERF_COUNT_HW_BRANCH_MISSES] = 0x7f89;
+		ebx.split.no_branch_misses_retired = 0;
+		x86_pmu.events_maskl = ebx.full;
+		printk(KERN_INFO "CPU erratum AAJ80 worked around\n");
+	}
+}
+
 __init int intel_pmu_init(void)
 {
 	union cpuid10_edx edx;
 	union cpuid10_eax eax;
+	union cpuid10_ebx ebx;
 	unsigned int unused;
-	unsigned int ebx;
 	int version;
 
 	if (!cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) {
@@ -1567,8 +1611,8 @@ __init int intel_pmu_init(void)
 	 * Check whether the Architectural PerfMon supports
 	 * Branch Misses Retired hw_event or not.
 	 */
-	cpuid(10, &eax.full, &ebx, &unused, &edx.full);
-	if (eax.split.mask_length <= ARCH_PERFMON_BRANCH_MISSES_RETIRED)
+	cpuid(10, &eax.full, &ebx.full, &unused, &edx.full);
+	if (eax.split.mask_length < ARCH_PERFMON_EVENTS_COUNT)
 		return -ENODEV;
 
 	version = eax.split.version_id;
@@ -1582,6 +1626,9 @@ __init int intel_pmu_init(void)
 	x86_pmu.cntval_bits		= eax.split.bit_width;
 	x86_pmu.cntval_mask		= (1ULL << eax.split.bit_width) - 1;
 
+	x86_pmu.events_maskl		= ebx.full;
+	x86_pmu.events_mask_len		= eax.split.mask_length;
+
 	/*
 	 * Quirk: v2 perfmon does not report fixed-purpose events, so
 	 * assume at least 3 events:
@@ -1601,6 +1648,8 @@ __init int intel_pmu_init(void)
 
 	intel_ds_init();
 
+	x86_add_quirk(intel_arch_events_quirk); /* Install first, so it runs last */
+
 	/*
 	 * Install the hw-cache-events table:
 	 */
@@ -1610,7 +1659,7 @@ __init int intel_pmu_init(void)
 		break;
 
 	case 15: /* original 65 nm celeron/pentium/core2/xeon, "Merom"/"Conroe" */
-		x86_pmu.quirks = intel_clovertown_quirks;
+		x86_add_quirk(intel_clovertown_quirk);
 	case 22: /* single-core 65 nm celeron/core2solo "Merom-L"/"Conroe-L" */
 	case 23: /* current 45 nm celeron/core2/xeon "Penryn"/"Wolfdale" */
 	case 29: /* six-core 45 nm xeon "Dunnington" */
@@ -1644,17 +1693,8 @@ __init int intel_pmu_init(void)
 		/* UOPS_EXECUTED.CORE_ACTIVE_CYCLES,c=1,i=1 */
 		intel_perfmon_event_map[PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = 0x1803fb1;
 
-		if (ebx & 0x40) {
-			/*
-			 * Erratum AAJ80 detected, we work it around by using
-			 * the BR_MISP_EXEC.ANY event. This will over-count
-			 * branch-misses, but it's still much better than the
-			 * architectural event which is often completely bogus:
-			 */
-			intel_perfmon_event_map[PERF_COUNT_HW_BRANCH_MISSES] = 0x7f89;
+		x86_add_quirk(intel_nehalem_quirk);
 
-			pr_cont("erratum AAJ80 worked around, ");
-		}
 		pr_cont("Nehalem events, ");
 		break;
 
@@ -1694,6 +1734,7 @@ __init int intel_pmu_init(void)
 		break;
 
 	case 42: /* SandyBridge */
+		x86_add_quirk(intel_sandybridge_quirk);
 	case 45: /* SandyBridge, "Romely-EP" */
 		memcpy(hw_cache_event_ids, snb_hw_cache_event_ids,
 		       sizeof(hw_cache_event_ids));
@@ -1730,5 +1771,6 @@ __init int intel_pmu_init(void)
 			break;
 		}
 	}
+
 	return 0;
 }
diff --git a/arch/x86/kernel/cpu/perf_event_intel_ds.c b/arch/x86/kernel/cpu/perf_event_intel_ds.c
index c0d238f..73da6b6 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_ds.c
+++ b/arch/x86/kernel/cpu/perf_event_intel_ds.c
@@ -493,6 +493,7 @@ static int intel_pmu_pebs_fixup_ip(struct pt_regs *regs)
 	unsigned long from = cpuc->lbr_entries[0].from;
 	unsigned long old_to, to = cpuc->lbr_entries[0].to;
 	unsigned long ip = regs->ip;
+	int is_64bit = 0;
 
 	/*
 	 * We don't need to fixup if the PEBS assist is fault like
@@ -544,7 +545,10 @@ static int intel_pmu_pebs_fixup_ip(struct pt_regs *regs)
 		} else
 			kaddr = (void *)to;
 
-		kernel_insn_init(&insn, kaddr);
+#ifdef CONFIG_X86_64
+		is_64bit = kernel_ip(to) || !test_thread_flag(TIF_IA32);
+#endif
+		insn_init(&insn, kaddr, is_64bit);
 		insn_get_length(&insn);
 		to += insn.length;
 	} while (to < ip);
diff --git a/arch/x86/kernel/cpu/perf_event_p4.c b/arch/x86/kernel/cpu/perf_event_p4.c
index 492bf13..ef484d9 100644
--- a/arch/x86/kernel/cpu/perf_event_p4.c
+++ b/arch/x86/kernel/cpu/perf_event_p4.c
@@ -1268,7 +1268,7 @@ reserve:
 	}
 
 done:
-	return num ? -ENOSPC : 0;
+	return num ? -EINVAL : 0;
 }
 
 static __initconst const struct x86_pmu p4_pmu = {
diff --git a/arch/x86/kernel/cpu/powerflags.c b/arch/x86/kernel/cpu/powerflags.c
index 5abbea2..7b3fe56 100644
--- a/arch/x86/kernel/cpu/powerflags.c
+++ b/arch/x86/kernel/cpu/powerflags.c
@@ -16,5 +16,6 @@ const char *const x86_power_flags[32] = {
 	"100mhzsteps",
 	"hwpstate",
 	"",	/* tsc invariant mapped to constant_tsc */
-		/* nothing */
+	"cpb",  /* core performance boost */
+	"eff_freq_ro", /* Readonly aperf/mperf */
 };
diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c
index 14b2314..8022c66 100644
--- a/arch/x86/kernel/cpu/proc.c
+++ b/arch/x86/kernel/cpu/proc.c
@@ -64,12 +64,10 @@ static void show_cpuinfo_misc(struct seq_file *m, struct cpuinfo_x86 *c)
 static int show_cpuinfo(struct seq_file *m, void *v)
 {
 	struct cpuinfo_x86 *c = v;
-	unsigned int cpu = 0;
+	unsigned int cpu;
 	int i;
 
-#ifdef CONFIG_SMP
 	cpu = c->cpu_index;
-#endif
 	seq_printf(m, "processor\t: %u\n"
 		   "vendor_id\t: %s\n"
 		   "cpu family\t: %d\n"
diff --git a/arch/x86/kernel/cpuid.c b/arch/x86/kernel/cpuid.c
index 212a6a4..a524353 100644
--- a/arch/x86/kernel/cpuid.c
+++ b/arch/x86/kernel/cpuid.c
@@ -177,7 +177,7 @@ static struct notifier_block __refdata cpuid_class_cpu_notifier =
 	.notifier_call = cpuid_class_cpu_callback,
 };
 
-static char *cpuid_devnode(struct device *dev, mode_t *mode)
+static char *cpuid_devnode(struct device *dev, umode_t *mode)
 {
 	return kasprintf(GFP_KERNEL, "cpu/%u/cpuid", MINOR(dev->devt));
 }
diff --git a/arch/x86/kernel/dumpstack_32.c b/arch/x86/kernel/dumpstack_32.c
index 3b97a80..c99f9ed 100644
--- a/arch/x86/kernel/dumpstack_32.c
+++ b/arch/x86/kernel/dumpstack_32.c
@@ -116,16 +116,16 @@ void show_registers(struct pt_regs *regs)
 		for (i = 0; i < code_len; i++, ip++) {
 			if (ip < (u8 *)PAGE_OFFSET ||
 					probe_kernel_address(ip, c)) {
-				printk(" Bad EIP value.");
+				printk(KERN_CONT " Bad EIP value.");
 				break;
 			}
 			if (ip == (u8 *)regs->ip)
-				printk("<%02x> ", c);
+				printk(KERN_CONT "<%02x> ", c);
 			else
-				printk("%02x ", c);
+				printk(KERN_CONT "%02x ", c);
 		}
 	}
-	printk("\n");
+	printk(KERN_CONT "\n");
 }
 
 int is_valid_bugaddr(unsigned long ip)
diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c
index 19853ad..6d728d9 100644
--- a/arch/x86/kernel/dumpstack_64.c
+++ b/arch/x86/kernel/dumpstack_64.c
@@ -284,16 +284,16 @@ void show_registers(struct pt_regs *regs)
 		for (i = 0; i < code_len; i++, ip++) {
 			if (ip < (u8 *)PAGE_OFFSET ||
 					probe_kernel_address(ip, c)) {
-				printk(" Bad RIP value.");
+				printk(KERN_CONT " Bad RIP value.");
 				break;
 			}
 			if (ip == (u8 *)regs->ip)
-				printk("<%02x> ", c);
+				printk(KERN_CONT "<%02x> ", c);
 			else
-				printk("%02x ", c);
+				printk(KERN_CONT "%02x ", c);
 		}
 	}
-	printk("\n");
+	printk(KERN_CONT "\n");
 }
 
 int is_valid_bugaddr(unsigned long ip)
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 303a0e4..8071e2f 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -738,35 +738,17 @@ core_initcall(e820_mark_nvs_memory);
 /*
  * pre allocated 4k and reserved it in memblock and e820_saved
  */
-u64 __init early_reserve_e820(u64 startt, u64 sizet, u64 align)
+u64 __init early_reserve_e820(u64 size, u64 align)
 {
-	u64 size = 0;
 	u64 addr;
-	u64 start;
 
-	for (start = startt; ; start += size) {
-		start = memblock_x86_find_in_range_size(start, &size, align);
-		if (start == MEMBLOCK_ERROR)
-			return 0;
-		if (size >= sizet)
-			break;
+	addr = __memblock_alloc_base(size, align, MEMBLOCK_ALLOC_ACCESSIBLE);
+	if (addr) {
+		e820_update_range_saved(addr, size, E820_RAM, E820_RESERVED);
+		printk(KERN_INFO "update e820_saved for early_reserve_e820\n");
+		update_e820_saved();
 	}
 
-#ifdef CONFIG_X86_32
-	if (start >= MAXMEM)
-		return 0;
-	if (start + size > MAXMEM)
-		size = MAXMEM - start;
-#endif
-
-	addr = round_down(start + size - sizet, align);
-	if (addr < start)
-		return 0;
-	memblock_x86_reserve_range(addr, addr + sizet, "new next");
-	e820_update_range_saved(addr, sizet, E820_RAM, E820_RESERVED);
-	printk(KERN_INFO "update e820_saved for early_reserve_e820\n");
-	update_e820_saved();
-
 	return addr;
 }
 
@@ -1090,7 +1072,7 @@ void __init memblock_x86_fill(void)
 	 * We are safe to enable resizing, beause memblock_x86_fill()
 	 * is rather later for x86
 	 */
-	memblock_can_resize = 1;
+	memblock_allow_resize();
 
 	for (i = 0; i < e820.nr_map; i++) {
 		struct e820entry *ei = &e820.map[i];
@@ -1105,22 +1087,36 @@ void __init memblock_x86_fill(void)
 		memblock_add(ei->addr, ei->size);
 	}
 
-	memblock_analyze();
 	memblock_dump_all();
 }
 
 void __init memblock_find_dma_reserve(void)
 {
 #ifdef CONFIG_X86_64
-	u64 free_size_pfn;
-	u64 mem_size_pfn;
+	u64 nr_pages = 0, nr_free_pages = 0;
+	unsigned long start_pfn, end_pfn;
+	phys_addr_t start, end;
+	int i;
+	u64 u;
+
 	/*
 	 * need to find out used area below MAX_DMA_PFN
 	 * need to use memblock to get free size in [0, MAX_DMA_PFN]
 	 * at first, and assume boot_mem will not take below MAX_DMA_PFN
 	 */
-	mem_size_pfn = memblock_x86_memory_in_range(0, MAX_DMA_PFN << PAGE_SHIFT) >> PAGE_SHIFT;
-	free_size_pfn = memblock_x86_free_memory_in_range(0, MAX_DMA_PFN << PAGE_SHIFT) >> PAGE_SHIFT;
-	set_dma_reserve(mem_size_pfn - free_size_pfn);
+	for_each_mem_pfn_range(i, MAX_NUMNODES, &start_pfn, &end_pfn, NULL) {
+		start_pfn = min_t(unsigned long, start_pfn, MAX_DMA_PFN);
+		end_pfn = min_t(unsigned long, end_pfn, MAX_DMA_PFN);
+		nr_pages += end_pfn - start_pfn;
+	}
+
+	for_each_free_mem_range(u, MAX_NUMNODES, &start, &end, NULL) {
+		start_pfn = min_t(unsigned long, PFN_UP(start), MAX_DMA_PFN);
+		end_pfn = min_t(unsigned long, PFN_DOWN(end), MAX_DMA_PFN);
+		if (start_pfn < end_pfn)
+			nr_free_pages += end_pfn - start_pfn;
+	}
+
+	set_dma_reserve(nr_pages - nr_free_pages);
 #endif
 }
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index f3f6f53..22d0e21 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -625,6 +625,8 @@ work_notifysig:				# deal with pending signals and
 	movl %esp, %eax
 	jne work_notifysig_v86		# returning to kernel-space or
 					# vm86-space
+	TRACE_IRQS_ON
+	ENABLE_INTERRUPTS(CLBR_NONE)
 	xorl %edx, %edx
 	call do_notify_resume
 	jmp resume_userspace_sig
@@ -638,6 +640,8 @@ work_notifysig_v86:
 #else
 	movl %esp, %eax
 #endif
+	TRACE_IRQS_ON
+	ENABLE_INTERRUPTS(CLBR_NONE)
 	xorl %edx, %edx
 	call do_notify_resume
 	jmp resume_userspace_sig
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index faf8d5e..a20e1cb 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -221,7 +221,7 @@ ENDPROC(native_usergs_sysret64)
 	/*CFI_REL_OFFSET	ss,0*/
 	pushq_cfi %rax /* rsp */
 	CFI_REL_OFFSET	rsp,0
-	pushq_cfi $X86_EFLAGS_IF /* eflags - interrupts on */
+	pushq_cfi $(X86_EFLAGS_IF|X86_EFLAGS_BIT1) /* eflags - interrupts on */
 	/*CFI_REL_OFFSET	rflags,0*/
 	pushq_cfi $__KERNEL_CS /* cs */
 	/*CFI_REL_OFFSET	cs,0*/
@@ -411,7 +411,7 @@ ENTRY(ret_from_fork)
 	RESTORE_REST
 
 	testl $3, CS-ARGOFFSET(%rsp)		# from kernel_thread?
-	je   int_ret_from_sys_call
+	jz   retint_restore_args
 
 	testl $_TIF_IA32, TI_flags(%rcx)	# 32-bit compat task needs IRET
 	jnz  int_ret_from_sys_call
@@ -465,7 +465,7 @@ ENTRY(system_call)
 	 * after the swapgs, so that it can do the swapgs
 	 * for the guest and jump here on syscall.
 	 */
-ENTRY(system_call_after_swapgs)
+GLOBAL(system_call_after_swapgs)
 
 	movq	%rsp,PER_CPU_VAR(old_rsp)
 	movq	PER_CPU_VAR(kernel_stack),%rsp
@@ -478,8 +478,7 @@ ENTRY(system_call_after_swapgs)
 	movq  %rax,ORIG_RAX-ARGOFFSET(%rsp)
 	movq  %rcx,RIP-ARGOFFSET(%rsp)
 	CFI_REL_OFFSET rip,RIP-ARGOFFSET
-	GET_THREAD_INFO(%rcx)
-	testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%rcx)
+	testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
 	jnz tracesys
 system_call_fastpath:
 	cmpq $__NR_syscall_max,%rax
@@ -496,10 +495,9 @@ ret_from_sys_call:
 	/* edi:	flagmask */
 sysret_check:
 	LOCKDEP_SYS_EXIT
-	GET_THREAD_INFO(%rcx)
 	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
-	movl TI_flags(%rcx),%edx
+	movl TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET),%edx
 	andl %edi,%edx
 	jnz  sysret_careful
 	CFI_REMEMBER_STATE
@@ -583,7 +581,7 @@ sysret_audit:
 	/* Do syscall tracing */
 tracesys:
 #ifdef CONFIG_AUDITSYSCALL
-	testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%rcx)
+	testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
 	jz auditsys
 #endif
 	SAVE_REST
@@ -612,8 +610,6 @@ tracesys:
 GLOBAL(int_ret_from_sys_call)
 	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
-	testl $3,CS-ARGOFFSET(%rsp)
-	je retint_restore_args
 	movl $_TIF_ALLWORK_MASK,%edi
 	/* edi:	mask to check */
 GLOBAL(int_with_check)
@@ -953,6 +949,7 @@ END(common_interrupt)
 ENTRY(\sym)
 	INTR_FRAME
 	pushq_cfi $~(\num)
+.Lcommon_\sym:
 	interrupt \do_sym
 	jmp ret_from_intr
 	CFI_ENDPROC
@@ -976,13 +973,21 @@ apicinterrupt X86_PLATFORM_IPI_VECTOR \
 	x86_platform_ipi smp_x86_platform_ipi
 
 #ifdef CONFIG_SMP
-.irp idx,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15, \
+	ALIGN
+	INTR_FRAME
+.irp idx,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15, \
 	16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31
 .if NUM_INVALIDATE_TLB_VECTORS > \idx
-apicinterrupt (INVALIDATE_TLB_VECTOR_START)+\idx \
-	invalidate_interrupt\idx smp_invalidate_interrupt
+ENTRY(invalidate_interrupt\idx)
+	pushq_cfi $~(INVALIDATE_TLB_VECTOR_START+\idx)
+	jmp .Lcommon_invalidate_interrupt0
+	CFI_ADJUST_CFA_OFFSET -8
+END(invalidate_interrupt\idx)
 .endif
 .endr
+	CFI_ENDPROC
+apicinterrupt INVALIDATE_TLB_VECTOR_START, \
+	invalidate_interrupt0, smp_invalidate_interrupt
 #endif
 
 apicinterrupt THRESHOLD_APIC_VECTOR \
diff --git a/arch/x86/kernel/head.c b/arch/x86/kernel/head.c
index af0699b..48d9d4e 100644
--- a/arch/x86/kernel/head.c
+++ b/arch/x86/kernel/head.c
@@ -52,5 +52,5 @@ void __init reserve_ebda_region(void)
 		lowmem = 0x9f000;
 
 	/* reserve all memory between lowmem and the 1MB mark */
-	memblock_x86_reserve_range(lowmem, 0x100000, "* BIOS reserved");
+	memblock_reserve(lowmem, 0x100000 - lowmem);
 }
diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c
index 3bb0850..51ff186 100644
--- a/arch/x86/kernel/head32.c
+++ b/arch/x86/kernel/head32.c
@@ -31,9 +31,8 @@ static void __init i386_default_early_setup(void)
 
 void __init i386_start_kernel(void)
 {
-	memblock_init();
-
-	memblock_x86_reserve_range(__pa_symbol(&_text), __pa_symbol(&__bss_stop), "TEXT DATA BSS");
+	memblock_reserve(__pa_symbol(&_text),
+			 __pa_symbol(&__bss_stop) - __pa_symbol(&_text));
 
 #ifdef CONFIG_BLK_DEV_INITRD
 	/* Reserve INITRD */
@@ -42,7 +41,7 @@ void __init i386_start_kernel(void)
 		u64 ramdisk_image = boot_params.hdr.ramdisk_image;
 		u64 ramdisk_size  = boot_params.hdr.ramdisk_size;
 		u64 ramdisk_end   = PAGE_ALIGN(ramdisk_image + ramdisk_size);
-		memblock_x86_reserve_range(ramdisk_image, ramdisk_end, "RAMDISK");
+		memblock_reserve(ramdisk_image, ramdisk_end - ramdisk_image);
 	}
 #endif
 
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index 5655c22..3a3b779 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -98,9 +98,8 @@ void __init x86_64_start_reservations(char *real_mode_data)
 {
 	copy_bootdata(__va(real_mode_data));
 
-	memblock_init();
-
-	memblock_x86_reserve_range(__pa_symbol(&_text), __pa_symbol(&__bss_stop), "TEXT DATA BSS");
+	memblock_reserve(__pa_symbol(&_text),
+			 __pa_symbol(&__bss_stop) - __pa_symbol(&_text));
 
 #ifdef CONFIG_BLK_DEV_INITRD
 	/* Reserve INITRD */
@@ -109,7 +108,7 @@ void __init x86_64_start_reservations(char *real_mode_data)
 		unsigned long ramdisk_image = boot_params.hdr.ramdisk_image;
 		unsigned long ramdisk_size  = boot_params.hdr.ramdisk_size;
 		unsigned long ramdisk_end   = PAGE_ALIGN(ramdisk_image + ramdisk_size);
-		memblock_x86_reserve_range(ramdisk_image, ramdisk_end, "RAMDISK");
+		memblock_reserve(ramdisk_image, ramdisk_end - ramdisk_image);
 	}
 #endif
 
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index b946a9e..ad0de0c 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -2,7 +2,6 @@
 #include <linux/clockchips.h>
 #include <linux/interrupt.h>
 #include <linux/export.h>
-#include <linux/sysdev.h>
 #include <linux/delay.h>
 #include <linux/errno.h>
 #include <linux/i8253.h>
@@ -32,8 +31,6 @@
 #define HPET_MIN_CYCLES			128
 #define HPET_MIN_PROG_DELTA		(HPET_MIN_CYCLES + (HPET_MIN_CYCLES >> 1))
 
-#define EVT_TO_HPET_DEV(evt) container_of(evt, struct hpet_dev, evt)
-
 /*
  * HPET address is set in acpi/boot.c, when an ACPI entry exists
  */
@@ -55,6 +52,11 @@ struct hpet_dev {
 	char				name[10];
 };
 
+inline struct hpet_dev *EVT_TO_HPET_DEV(struct clock_event_device *evtdev)
+{
+	return container_of(evtdev, struct hpet_dev, evt);
+}
+
 inline unsigned int hpet_readl(unsigned int a)
 {
 	return readl(hpet_virt_address + a);
@@ -1049,6 +1051,14 @@ int hpet_rtc_timer_init(void)
 }
 EXPORT_SYMBOL_GPL(hpet_rtc_timer_init);
 
+static void hpet_disable_rtc_channel(void)
+{
+	unsigned long cfg;
+	cfg = hpet_readl(HPET_T1_CFG);
+	cfg &= ~HPET_TN_ENABLE;
+	hpet_writel(cfg, HPET_T1_CFG);
+}
+
 /*
  * The functions below are called from rtc driver.
  * Return 0 if HPET is not being used.
@@ -1060,6 +1070,9 @@ int hpet_mask_rtc_irq_bit(unsigned long bit_mask)
 		return 0;
 
 	hpet_rtc_flags &= ~bit_mask;
+	if (unlikely(!hpet_rtc_flags))
+		hpet_disable_rtc_channel();
+
 	return 1;
 }
 EXPORT_SYMBOL_GPL(hpet_mask_rtc_irq_bit);
@@ -1125,15 +1138,11 @@ EXPORT_SYMBOL_GPL(hpet_rtc_dropped_irq);
 
 static void hpet_rtc_timer_reinit(void)
 {
-	unsigned int cfg, delta;
+	unsigned int delta;
 	int lost_ints = -1;
 
-	if (unlikely(!hpet_rtc_flags)) {
-		cfg = hpet_readl(HPET_T1_CFG);
-		cfg &= ~HPET_TN_ENABLE;
-		hpet_writel(cfg, HPET_T1_CFG);
-		return;
-	}
+	if (unlikely(!hpet_rtc_flags))
+		hpet_disable_rtc_channel();
 
 	if (!(hpet_rtc_flags & RTC_PIE) || hpet_pie_limit)
 		delta = hpet_default_delta;
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index 429e0c9..7943e0c 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -74,6 +74,10 @@ int arch_show_interrupts(struct seq_file *p, int prec)
 	for_each_online_cpu(j)
 		seq_printf(p, "%10u ", irq_stats(j)->apic_irq_work_irqs);
 	seq_printf(p, "  IRQ work interrupts\n");
+	seq_printf(p, "%*s: ", prec, "RTR");
+	for_each_online_cpu(j)
+		seq_printf(p, "%10u ", irq_stats(j)->icr_read_retry_count);
+	seq_printf(p, "  APIC ICR read retries\n");
 #endif
 	if (x86_platform_ipi_callback) {
 		seq_printf(p, "%*s: ", prec, "PLT");
@@ -136,6 +140,7 @@ u64 arch_irq_stat_cpu(unsigned int cpu)
 	sum += irq_stats(cpu)->irq_spurious_count;
 	sum += irq_stats(cpu)->apic_perf_irqs;
 	sum += irq_stats(cpu)->apic_irq_work_irqs;
+	sum += irq_stats(cpu)->icr_read_retry_count;
 #endif
 	if (x86_platform_ipi_callback)
 		sum += irq_stats(cpu)->x86_platform_ipis;
@@ -181,8 +186,8 @@ unsigned int __irq_entry do_IRQ(struct pt_regs *regs)
 	unsigned vector = ~regs->orig_ax;
 	unsigned irq;
 
-	exit_idle();
 	irq_enter();
+	exit_idle();
 
 	irq = __this_cpu_read(vector_irq[vector]);
 
@@ -209,10 +214,10 @@ void smp_x86_platform_ipi(struct pt_regs *regs)
 
 	ack_APIC_irq();
 
-	exit_idle();
-
 	irq_enter();
 
+	exit_idle();
+
 	inc_irq_stat(x86_platform_ipis);
 
 	if (x86_platform_ipi_callback)
diff --git a/arch/x86/kernel/irq_64.c b/arch/x86/kernel/irq_64.c
index acf8fbf..69bca46 100644
--- a/arch/x86/kernel/irq_64.c
+++ b/arch/x86/kernel/irq_64.c
@@ -38,6 +38,9 @@ static inline void stack_overflow_check(struct pt_regs *regs)
 #ifdef CONFIG_DEBUG_STACKOVERFLOW
 	u64 curbase = (u64)task_stack_page(current);
 
+	if (user_mode_vm(regs))
+		return;
+
 	WARN_ONCE(regs->sp >= curbase &&
 		  regs->sp <= curbase + THREAD_SIZE &&
 		  regs->sp <  curbase + sizeof(struct thread_info) +
diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c
index b3300e6..313fb5c 100644
--- a/arch/x86/kernel/irqinit.c
+++ b/arch/x86/kernel/irqinit.c
@@ -9,7 +9,7 @@
 #include <linux/kprobes.h>
 #include <linux/init.h>
 #include <linux/kernel_stat.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/bitops.h>
 #include <linux/acpi.h>
 #include <linux/io.h>
diff --git a/arch/x86/kernel/jump_label.c b/arch/x86/kernel/jump_label.c
index ea9d5f2f..2889b3d 100644
--- a/arch/x86/kernel/jump_label.c
+++ b/arch/x86/kernel/jump_label.c
@@ -50,7 +50,7 @@ void arch_jump_label_transform(struct jump_entry *entry,
 	put_online_cpus();
 }
 
-void arch_jump_label_transform_static(struct jump_entry *entry,
+__init_or_module void arch_jump_label_transform_static(struct jump_entry *entry,
 				      enum jump_label_type type)
 {
 	__jump_label_transform(entry, type, text_poke_early);
diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c
index d494799..fe86493 100644
--- a/arch/x86/kernel/microcode_amd.c
+++ b/arch/x86/kernel/microcode_amd.c
@@ -1,14 +1,18 @@
 /*
  *  AMD CPU Microcode Update Driver for Linux
- *  Copyright (C) 2008 Advanced Micro Devices Inc.
+ *  Copyright (C) 2008-2011 Advanced Micro Devices Inc.
  *
  *  Author: Peter Oruba <peter.oruba@amd.com>
  *
  *  Based on work by:
  *  Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
  *
- *  This driver allows to upgrade microcode on AMD
- *  family 0x10 and 0x11 processors.
+ *  Maintainers:
+ *  Andreas Herrmann <andreas.herrmann3@amd.com>
+ *  Borislav Petkov <borislav.petkov@amd.com>
+ *
+ *  This driver allows to upgrade microcode on F10h AMD
+ *  CPUs and later.
  *
  *  Licensed under the terms of the GNU General Public
  *  License version 2. See file COPYING for details.
@@ -71,6 +75,9 @@ struct microcode_amd {
 
 static struct equiv_cpu_entry *equiv_cpu_table;
 
+/* page-sized ucode patch buffer */
+void *patch;
+
 static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig)
 {
 	struct cpuinfo_x86 *c = &cpu_data(cpu);
@@ -86,27 +93,76 @@ static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig)
 	return 0;
 }
 
-static int get_matching_microcode(int cpu, struct microcode_header_amd *mc_hdr,
-				  int rev)
+static unsigned int verify_ucode_size(int cpu, u32 patch_size,
+				      unsigned int size)
 {
-	unsigned int current_cpu_id;
-	u16 equiv_cpu_id = 0;
-	unsigned int i = 0;
+	struct cpuinfo_x86 *c = &cpu_data(cpu);
+	u32 max_size;
+
+#define F1XH_MPB_MAX_SIZE 2048
+#define F14H_MPB_MAX_SIZE 1824
+#define F15H_MPB_MAX_SIZE 4096
+
+	switch (c->x86) {
+	case 0x14:
+		max_size = F14H_MPB_MAX_SIZE;
+		break;
+	case 0x15:
+		max_size = F15H_MPB_MAX_SIZE;
+		break;
+	default:
+		max_size = F1XH_MPB_MAX_SIZE;
+		break;
+	}
+
+	if (patch_size > min_t(u32, size, max_size)) {
+		pr_err("patch size mismatch\n");
+		return 0;
+	}
+
+	return patch_size;
+}
+
+static u16 find_equiv_id(void)
+{
+	unsigned int current_cpu_id, i = 0;
 
 	BUG_ON(equiv_cpu_table == NULL);
+
 	current_cpu_id = cpuid_eax(0x00000001);
 
 	while (equiv_cpu_table[i].installed_cpu != 0) {
-		if (current_cpu_id == equiv_cpu_table[i].installed_cpu) {
-			equiv_cpu_id = equiv_cpu_table[i].equiv_cpu;
-			break;
-		}
+		if (current_cpu_id == equiv_cpu_table[i].installed_cpu)
+			return equiv_cpu_table[i].equiv_cpu;
+
 		i++;
 	}
+	return 0;
+}
 
+/*
+ * we signal a good patch is found by returning its size > 0
+ */
+static int get_matching_microcode(int cpu, const u8 *ucode_ptr,
+				  unsigned int leftover_size, int rev,
+				  unsigned int *current_size)
+{
+	struct microcode_header_amd *mc_hdr;
+	unsigned int actual_size;
+	u16 equiv_cpu_id;
+
+	/* size of the current patch we're staring at */
+	*current_size = *(u32 *)(ucode_ptr + 4) + SECTION_HDR_SIZE;
+
+	equiv_cpu_id = find_equiv_id();
 	if (!equiv_cpu_id)
 		return 0;
 
+	/*
+	 * let's look at the patch header itself now
+	 */
+	mc_hdr = (struct microcode_header_amd *)(ucode_ptr + SECTION_HDR_SIZE);
+
 	if (mc_hdr->processor_rev_id != equiv_cpu_id)
 		return 0;
 
@@ -120,7 +176,20 @@ static int get_matching_microcode(int cpu, struct microcode_header_amd *mc_hdr,
 	if (mc_hdr->patch_id <= rev)
 		return 0;
 
-	return 1;
+	/*
+	 * now that the header looks sane, verify its size
+	 */
+	actual_size = verify_ucode_size(cpu, *current_size, leftover_size);
+	if (!actual_size)
+		return 0;
+
+	/* clear the patch buffer */
+	memset(patch, 0, PAGE_SIZE);
+
+	/* all looks ok, get the binary patch */
+	get_ucode_data(patch, ucode_ptr + SECTION_HDR_SIZE, actual_size);
+
+	return actual_size;
 }
 
 static int apply_microcode_amd(int cpu)
@@ -155,63 +224,6 @@ static int apply_microcode_amd(int cpu)
 	return 0;
 }
 
-static unsigned int verify_ucode_size(int cpu, const u8 *buf, unsigned int size)
-{
-	struct cpuinfo_x86 *c = &cpu_data(cpu);
-	u32 max_size, actual_size;
-
-#define F1XH_MPB_MAX_SIZE 2048
-#define F14H_MPB_MAX_SIZE 1824
-#define F15H_MPB_MAX_SIZE 4096
-
-	switch (c->x86) {
-	case 0x14:
-		max_size = F14H_MPB_MAX_SIZE;
-		break;
-	case 0x15:
-		max_size = F15H_MPB_MAX_SIZE;
-		break;
-	default:
-		max_size = F1XH_MPB_MAX_SIZE;
-		break;
-	}
-
-	actual_size = *(u32 *)(buf + 4);
-
-	if (actual_size + SECTION_HDR_SIZE > size || actual_size > max_size) {
-		pr_err("section size mismatch\n");
-		return 0;
-	}
-
-	return actual_size;
-}
-
-static struct microcode_header_amd *
-get_next_ucode(int cpu, const u8 *buf, unsigned int size, unsigned int *mc_size)
-{
-	struct microcode_header_amd *mc = NULL;
-	unsigned int actual_size = 0;
-
-	if (*(u32 *)buf != UCODE_UCODE_TYPE) {
-		pr_err("invalid type field in container file section header\n");
-		goto out;
-	}
-
-	actual_size = verify_ucode_size(cpu, buf, size);
-	if (!actual_size)
-		goto out;
-
-	mc = vzalloc(actual_size);
-	if (!mc)
-		goto out;
-
-	get_ucode_data(mc, buf + SECTION_HDR_SIZE, actual_size);
-	*mc_size = actual_size + SECTION_HDR_SIZE;
-
-out:
-	return mc;
-}
-
 static int install_equiv_cpu_table(const u8 *buf)
 {
 	unsigned int *ibuf = (unsigned int *)buf;
@@ -247,36 +259,38 @@ generic_load_microcode(int cpu, const u8 *data, size_t size)
 {
 	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
 	struct microcode_header_amd *mc_hdr = NULL;
-	unsigned int mc_size, leftover;
+	unsigned int mc_size, leftover, current_size = 0;
 	int offset;
 	const u8 *ucode_ptr = data;
 	void *new_mc = NULL;
 	unsigned int new_rev = uci->cpu_sig.rev;
-	enum ucode_state state = UCODE_OK;
+	enum ucode_state state = UCODE_ERROR;
 
 	offset = install_equiv_cpu_table(ucode_ptr);
 	if (offset < 0) {
 		pr_err("failed to create equivalent cpu table\n");
-		return UCODE_ERROR;
+		goto out;
 	}
-
 	ucode_ptr += offset;
 	leftover = size - offset;
 
-	while (leftover) {
-		mc_hdr = get_next_ucode(cpu, ucode_ptr, leftover, &mc_size);
-		if (!mc_hdr)
-			break;
+	if (*(u32 *)ucode_ptr != UCODE_UCODE_TYPE) {
+		pr_err("invalid type field in container file section header\n");
+		goto free_table;
+	}
 
-		if (get_matching_microcode(cpu, mc_hdr, new_rev)) {
-			vfree(new_mc);
+	while (leftover) {
+		mc_size = get_matching_microcode(cpu, ucode_ptr, leftover,
+						 new_rev, &current_size);
+		if (mc_size) {
+			mc_hdr  = patch;
+			new_mc  = patch;
 			new_rev = mc_hdr->patch_id;
-			new_mc  = mc_hdr;
-		} else
-			vfree(mc_hdr);
+			goto out_ok;
+		}
 
-		ucode_ptr += mc_size;
-		leftover  -= mc_size;
+		ucode_ptr += current_size;
+		leftover  -= current_size;
 	}
 
 	if (!new_mc) {
@@ -284,19 +298,16 @@ generic_load_microcode(int cpu, const u8 *data, size_t size)
 		goto free_table;
 	}
 
-	if (!leftover) {
-		vfree(uci->mc);
-		uci->mc = new_mc;
-		pr_debug("CPU%d update ucode (0x%08x -> 0x%08x)\n",
-			 cpu, uci->cpu_sig.rev, new_rev);
-	} else {
-		vfree(new_mc);
-		state = UCODE_ERROR;
-	}
+out_ok:
+	uci->mc = new_mc;
+	state = UCODE_OK;
+	pr_debug("CPU%d update ucode (0x%08x -> 0x%08x)\n",
+		 cpu, uci->cpu_sig.rev, new_rev);
 
 free_table:
 	free_equiv_cpu_table();
 
+out:
 	return state;
 }
 
@@ -337,7 +348,6 @@ static void microcode_fini_cpu_amd(int cpu)
 {
 	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
 
-	vfree(uci->mc);
 	uci->mc = NULL;
 }
 
@@ -351,5 +361,14 @@ static struct microcode_ops microcode_amd_ops = {
 
 struct microcode_ops * __init init_amd_microcode(void)
 {
+	patch = (void *)get_zeroed_page(GFP_KERNEL);
+	if (!patch)
+		return NULL;
+
 	return &microcode_amd_ops;
 }
+
+void __exit exit_amd_microcode(void)
+{
+	free_page((unsigned long)patch);
+}
diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c
index f2d2a66..fda91c3 100644
--- a/arch/x86/kernel/microcode_core.c
+++ b/arch/x86/kernel/microcode_core.c
@@ -256,7 +256,7 @@ static int __init microcode_dev_init(void)
 	return 0;
 }
 
-static void microcode_dev_exit(void)
+static void __exit microcode_dev_exit(void)
 {
 	misc_deregister(&microcode_dev);
 }
@@ -292,8 +292,8 @@ static int reload_for_cpu(int cpu)
 	return err;
 }
 
-static ssize_t reload_store(struct sys_device *dev,
-			    struct sysdev_attribute *attr,
+static ssize_t reload_store(struct device *dev,
+			    struct device_attribute *attr,
 			    const char *buf, size_t size)
 {
 	unsigned long val;
@@ -318,30 +318,30 @@ static ssize_t reload_store(struct sys_device *dev,
 	return ret;
 }
 
-static ssize_t version_show(struct sys_device *dev,
-			struct sysdev_attribute *attr, char *buf)
+static ssize_t version_show(struct device *dev,
+			struct device_attribute *attr, char *buf)
 {
 	struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
 
 	return sprintf(buf, "0x%x\n", uci->cpu_sig.rev);
 }
 
-static ssize_t pf_show(struct sys_device *dev,
-			struct sysdev_attribute *attr, char *buf)
+static ssize_t pf_show(struct device *dev,
+			struct device_attribute *attr, char *buf)
 {
 	struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
 
 	return sprintf(buf, "0x%x\n", uci->cpu_sig.pf);
 }
 
-static SYSDEV_ATTR(reload, 0200, NULL, reload_store);
-static SYSDEV_ATTR(version, 0400, version_show, NULL);
-static SYSDEV_ATTR(processor_flags, 0400, pf_show, NULL);
+static DEVICE_ATTR(reload, 0200, NULL, reload_store);
+static DEVICE_ATTR(version, 0400, version_show, NULL);
+static DEVICE_ATTR(processor_flags, 0400, pf_show, NULL);
 
 static struct attribute *mc_default_attrs[] = {
-	&attr_reload.attr,
-	&attr_version.attr,
-	&attr_processor_flags.attr,
+	&dev_attr_reload.attr,
+	&dev_attr_version.attr,
+	&dev_attr_processor_flags.attr,
 	NULL
 };
 
@@ -405,43 +405,45 @@ static enum ucode_state microcode_update_cpu(int cpu)
 	return ustate;
 }
 
-static int mc_sysdev_add(struct sys_device *sys_dev)
+static int mc_device_add(struct device *dev, struct subsys_interface *sif)
 {
-	int err, cpu = sys_dev->id;
+	int err, cpu = dev->id;
 
 	if (!cpu_online(cpu))
 		return 0;
 
 	pr_debug("CPU%d added\n", cpu);
 
-	err = sysfs_create_group(&sys_dev->kobj, &mc_attr_group);
+	err = sysfs_create_group(&dev->kobj, &mc_attr_group);
 	if (err)
 		return err;
 
 	if (microcode_init_cpu(cpu) == UCODE_ERROR) {
-		sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
+		sysfs_remove_group(&dev->kobj, &mc_attr_group);
 		return -EINVAL;
 	}
 
 	return err;
 }
 
-static int mc_sysdev_remove(struct sys_device *sys_dev)
+static int mc_device_remove(struct device *dev, struct subsys_interface *sif)
 {
-	int cpu = sys_dev->id;
+	int cpu = dev->id;
 
 	if (!cpu_online(cpu))
 		return 0;
 
 	pr_debug("CPU%d removed\n", cpu);
 	microcode_fini_cpu(cpu);
-	sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
+	sysfs_remove_group(&dev->kobj, &mc_attr_group);
 	return 0;
 }
 
-static struct sysdev_driver mc_sysdev_driver = {
-	.add			= mc_sysdev_add,
-	.remove			= mc_sysdev_remove,
+static struct subsys_interface mc_cpu_interface = {
+	.name			= "microcode",
+	.subsys			= &cpu_subsys,
+	.add_dev		= mc_device_add,
+	.remove_dev		= mc_device_remove,
 };
 
 /**
@@ -464,9 +466,9 @@ static __cpuinit int
 mc_cpu_callback(struct notifier_block *nb, unsigned long action, void *hcpu)
 {
 	unsigned int cpu = (unsigned long)hcpu;
-	struct sys_device *sys_dev;
+	struct device *dev;
 
-	sys_dev = get_cpu_sysdev(cpu);
+	dev = get_cpu_device(cpu);
 	switch (action) {
 	case CPU_ONLINE:
 	case CPU_ONLINE_FROZEN:
@@ -474,13 +476,13 @@ mc_cpu_callback(struct notifier_block *nb, unsigned long action, void *hcpu)
 	case CPU_DOWN_FAILED:
 	case CPU_DOWN_FAILED_FROZEN:
 		pr_debug("CPU%d added\n", cpu);
-		if (sysfs_create_group(&sys_dev->kobj, &mc_attr_group))
+		if (sysfs_create_group(&dev->kobj, &mc_attr_group))
 			pr_err("Failed to create group for CPU%d\n", cpu);
 		break;
 	case CPU_DOWN_PREPARE:
 	case CPU_DOWN_PREPARE_FROZEN:
 		/* Suspend is in progress, only remove the interface */
-		sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
+		sysfs_remove_group(&dev->kobj, &mc_attr_group);
 		pr_debug("CPU%d removed\n", cpu);
 		break;
 
@@ -519,27 +521,23 @@ static int __init microcode_init(void)
 
 	microcode_pdev = platform_device_register_simple("microcode", -1,
 							 NULL, 0);
-	if (IS_ERR(microcode_pdev)) {
-		microcode_dev_exit();
+	if (IS_ERR(microcode_pdev))
 		return PTR_ERR(microcode_pdev);
-	}
 
 	get_online_cpus();
 	mutex_lock(&microcode_mutex);
 
-	error = sysdev_driver_register(&cpu_sysdev_class, &mc_sysdev_driver);
+	error = subsys_interface_register(&mc_cpu_interface);
 
 	mutex_unlock(&microcode_mutex);
 	put_online_cpus();
 
-	if (error) {
-		platform_device_unregister(microcode_pdev);
-		return error;
-	}
+	if (error)
+		goto out_pdev;
 
 	error = microcode_dev_init();
 	if (error)
-		return error;
+		goto out_driver;
 
 	register_syscore_ops(&mc_syscore_ops);
 	register_hotcpu_notifier(&mc_cpu_notifier);
@@ -548,11 +546,27 @@ static int __init microcode_init(void)
 		" <tigran@aivazian.fsnet.co.uk>, Peter Oruba\n");
 
 	return 0;
+
+out_driver:
+	get_online_cpus();
+	mutex_lock(&microcode_mutex);
+
+	subsys_interface_unregister(&mc_cpu_interface);
+
+	mutex_unlock(&microcode_mutex);
+	put_online_cpus();
+
+out_pdev:
+	platform_device_unregister(microcode_pdev);
+	return error;
+
 }
 module_init(microcode_init);
 
 static void __exit microcode_exit(void)
 {
+	struct cpuinfo_x86 *c = &cpu_data(0);
+
 	microcode_dev_exit();
 
 	unregister_hotcpu_notifier(&mc_cpu_notifier);
@@ -561,7 +575,7 @@ static void __exit microcode_exit(void)
 	get_online_cpus();
 	mutex_lock(&microcode_mutex);
 
-	sysdev_driver_unregister(&cpu_sysdev_class, &mc_sysdev_driver);
+	subsys_interface_unregister(&mc_cpu_interface);
 
 	mutex_unlock(&microcode_mutex);
 	put_online_cpus();
@@ -570,6 +584,9 @@ static void __exit microcode_exit(void)
 
 	microcode_ops = NULL;
 
+	if (c->x86_vendor == X86_VENDOR_AMD)
+		exit_amd_microcode();
+
 	pr_info("Microcode Update Driver: v" MICROCODE_VERSION " removed.\n");
 }
 module_exit(microcode_exit);
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 9103b89..ca470e4 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -95,8 +95,8 @@ static void __init MP_bus_info(struct mpc_bus *m)
 	}
 #endif
 
+	set_bit(m->busid, mp_bus_not_pci);
 	if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA) - 1) == 0) {
-		set_bit(m->busid, mp_bus_not_pci);
 #if defined(CONFIG_EISA) || defined(CONFIG_MCA)
 		mp_bus_id_to_type[m->busid] = MP_BUS_ISA;
 #endif
@@ -564,9 +564,7 @@ void __init default_get_smp_config(unsigned int early)
 
 static void __init smp_reserve_memory(struct mpf_intel *mpf)
 {
-	unsigned long size = get_mpc_size(mpf->physptr);
-
-	memblock_x86_reserve_range(mpf->physptr, mpf->physptr+size, "* MP-table mpc");
+	memblock_reserve(mpf->physptr, get_mpc_size(mpf->physptr));
 }
 
 static int __init smp_scan_config(unsigned long base, unsigned long length)
@@ -595,7 +593,7 @@ static int __init smp_scan_config(unsigned long base, unsigned long length)
 			       mpf, (u64)virt_to_phys(mpf));
 
 			mem = virt_to_phys(mpf);
-			memblock_x86_reserve_range(mem, mem + sizeof(*mpf), "* MP-table mpf");
+			memblock_reserve(mem, sizeof(*mpf));
 			if (mpf->physptr)
 				smp_reserve_memory(mpf);
 
@@ -836,10 +834,8 @@ early_param("alloc_mptable", parse_alloc_mptable_opt);
 
 void __init early_reserve_e820_mpc_new(void)
 {
-	if (enable_update_mptable && alloc_mptable) {
-		u64 startt = 0;
-		mpc_new_phys = early_reserve_e820(startt, mpc_new_length, 4);
-	}
+	if (enable_update_mptable && alloc_mptable)
+		mpc_new_phys = early_reserve_e820(mpc_new_length, 4);
 }
 
 static int __init update_mp_table(void)
diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c
index 12fcbe2..9635676 100644
--- a/arch/x86/kernel/msr.c
+++ b/arch/x86/kernel/msr.c
@@ -236,7 +236,7 @@ static struct notifier_block __refdata msr_class_cpu_notifier = {
 	.notifier_call = msr_class_cpu_callback,
 };
 
-static char *msr_devnode(struct device *dev, mode_t *mode)
+static char *msr_devnode(struct device *dev, umode_t *mode)
 {
 	return kasprintf(GFP_KERNEL, "cpu/%u/msr", MINOR(dev->devt));
 }
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index b9b3b1a..15763af 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -293,7 +293,7 @@ int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
 	regs.orig_ax = -1;
 	regs.ip = (unsigned long) kernel_thread_helper;
 	regs.cs = __KERNEL_CS | get_kernel_rpl();
-	regs.flags = X86_EFLAGS_IF | 0x2;
+	regs.flags = X86_EFLAGS_IF | X86_EFLAGS_BIT1;
 
 	/* Ok, create the new process.. */
 	return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, &regs, 0, NULL, NULL);
@@ -403,6 +403,14 @@ void default_idle(void)
 EXPORT_SYMBOL(default_idle);
 #endif
 
+bool set_pm_idle_to_default(void)
+{
+	bool ret = !!pm_idle;
+
+	pm_idle = default_idle;
+
+	return ret;
+}
 void stop_this_cpu(void *dummy)
 {
 	local_irq_disable();
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 795b79f..485204f 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -99,7 +99,8 @@ void cpu_idle(void)
 
 	/* endless idle loop with no priority at all */
 	while (1) {
-		tick_nohz_stop_sched_tick(1);
+		tick_nohz_idle_enter();
+		rcu_idle_enter();
 		while (!need_resched()) {
 
 			check_pgt_cache();
@@ -116,7 +117,8 @@ void cpu_idle(void)
 				pm_idle();
 			start_critical_timings();
 		}
-		tick_nohz_restart_sched_tick();
+		rcu_idle_exit();
+		tick_nohz_idle_exit();
 		preempt_enable_no_resched();
 		schedule();
 		preempt_disable();
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 3bd7e6e..9b9fe4a 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -122,7 +122,7 @@ void cpu_idle(void)
 
 	/* endless idle loop with no priority at all */
 	while (1) {
-		tick_nohz_stop_sched_tick(1);
+		tick_nohz_idle_enter();
 		while (!need_resched()) {
 
 			rmb();
@@ -139,8 +139,14 @@ void cpu_idle(void)
 			enter_idle();
 			/* Don't trace irqs off for idle */
 			stop_critical_timings();
+
+			/* enter_idle() needs rcu for notifiers */
+			rcu_idle_enter();
+
 			if (cpuidle_idle_call())
 				pm_idle();
+
+			rcu_idle_exit();
 			start_critical_timings();
 
 			/* In many cases the interrupt that ended idle
@@ -149,7 +155,7 @@ void cpu_idle(void)
 			__exit_idle();
 		}
 
-		tick_nohz_restart_sched_tick();
+		tick_nohz_idle_exit();
 		preempt_enable_no_resched();
 		schedule();
 		preempt_disable();
@@ -293,13 +299,12 @@ int copy_thread(unsigned long clone_flags, unsigned long sp,
 	memset(p->thread.ptrace_bps, 0, sizeof(p->thread.ptrace_bps));
 
 	if (unlikely(test_tsk_thread_flag(me, TIF_IO_BITMAP))) {
-		p->thread.io_bitmap_ptr = kmalloc(IO_BITMAP_BYTES, GFP_KERNEL);
+		p->thread.io_bitmap_ptr = kmemdup(me->thread.io_bitmap_ptr,
+						  IO_BITMAP_BYTES, GFP_KERNEL);
 		if (!p->thread.io_bitmap_ptr) {
 			p->thread.io_bitmap_max = 0;
 			return -ENOMEM;
 		}
-		memcpy(p->thread.io_bitmap_ptr, me->thread.io_bitmap_ptr,
-				IO_BITMAP_BYTES);
 		set_tsk_thread_flag(p, TIF_IO_BITMAP);
 	}
 
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index 8252879..89a04c7 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -749,7 +749,8 @@ put:
 /*
  * Handle PTRACE_POKEUSR calls for the debug register area.
  */
-int ptrace_set_debugreg(struct task_struct *tsk, int n, unsigned long val)
+static int ptrace_set_debugreg(struct task_struct *tsk, int n,
+			       unsigned long val)
 {
 	struct thread_struct *thread = &(tsk->thread);
 	int rc = 0;
diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c
index b78643d..03920a1 100644
--- a/arch/x86/kernel/quirks.c
+++ b/arch/x86/kernel/quirks.c
@@ -553,4 +553,17 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC,
 			quirk_amd_nb_node);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_LINK,
 			quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F0,
+			quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F1,
+			quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F2,
+			quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F3,
+			quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F4,
+			quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F5,
+			quirk_amd_nb_node);
+
 #endif
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index e334be1..37a458b 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -124,7 +124,7 @@ __setup("reboot=", reboot_setup);
  */
 
 /*
- * Some machines require the "reboot=b"  commandline option,
+ * Some machines require the "reboot=b" or "reboot=k"  commandline options,
  * this quirk makes that automatic.
  */
 static int __init set_bios_reboot(const struct dmi_system_id *d)
@@ -136,6 +136,15 @@ static int __init set_bios_reboot(const struct dmi_system_id *d)
 	return 0;
 }
 
+static int __init set_kbd_reboot(const struct dmi_system_id *d)
+{
+	if (reboot_type != BOOT_KBD) {
+		reboot_type = BOOT_KBD;
+		printk(KERN_INFO "%s series board detected. Selecting KBD-method for reboot.\n", d->ident);
+	}
+	return 0;
+}
+
 static struct dmi_system_id __initdata reboot_dmi_table[] = {
 	{	/* Handle problems with rebooting on Dell E520's */
 		.callback = set_bios_reboot,
@@ -295,7 +304,7 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
 		},
 	},
 	{ /* Handle reboot issue on Acer Aspire one */
-		.callback = set_bios_reboot,
+		.callback = set_kbd_reboot,
 		.ident = "Acer Aspire One A110",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
@@ -443,6 +452,14 @@ static struct dmi_system_id __initdata pci_reboot_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E6420"),
 		},
 	},
+	{	/* Handle problems with rebooting on the OptiPlex 990. */
+		.callback = set_pci_reboot,
+		.ident = "Dell OptiPlex 990",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 990"),
+		},
+	},
 	{ }
 };
 
diff --git a/arch/x86/kernel/rtc.c b/arch/x86/kernel/rtc.c
index 348ce01..af6db6e 100644
--- a/arch/x86/kernel/rtc.c
+++ b/arch/x86/kernel/rtc.c
@@ -12,6 +12,7 @@
 #include <asm/vsyscall.h>
 #include <asm/x86_init.h>
 #include <asm/time.h>
+#include <asm/mrst.h>
 
 #ifdef CONFIG_X86_32
 /*
@@ -242,6 +243,10 @@ static __init int add_rtc_cmos(void)
 	if (of_have_populated_dt())
 		return 0;
 
+	/* Intel MID platforms don't have ioport rtc */
+	if (mrst_identify_cpu())
+		return -ENODEV;
+
 	platform_device_register(&rtc_device);
 	dev_info(&rtc_device.dev,
 		 "registered platform RTC device (no PNP device found)\n");
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index cf0ef98..d05444a 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -306,7 +306,8 @@ static void __init cleanup_highmap(void)
 static void __init reserve_brk(void)
 {
 	if (_brk_end > _brk_start)
-		memblock_x86_reserve_range(__pa(_brk_start), __pa(_brk_end), "BRK");
+		memblock_reserve(__pa(_brk_start),
+				 __pa(_brk_end) - __pa(_brk_start));
 
 	/* Mark brk area as locked down and no longer taking any
 	   new allocations */
@@ -331,13 +332,13 @@ static void __init relocate_initrd(void)
 	ramdisk_here = memblock_find_in_range(0, end_of_lowmem, area_size,
 					 PAGE_SIZE);
 
-	if (ramdisk_here == MEMBLOCK_ERROR)
+	if (!ramdisk_here)
 		panic("Cannot find place for new RAMDISK of size %lld\n",
 			 ramdisk_size);
 
 	/* Note: this includes all the lowmem currently occupied by
 	   the initrd, we rely on that fact to keep the data intact. */
-	memblock_x86_reserve_range(ramdisk_here, ramdisk_here + area_size, "NEW RAMDISK");
+	memblock_reserve(ramdisk_here, area_size);
 	initrd_start = ramdisk_here + PAGE_OFFSET;
 	initrd_end   = initrd_start + ramdisk_size;
 	printk(KERN_INFO "Allocated new RAMDISK: %08llx - %08llx\n",
@@ -393,7 +394,7 @@ static void __init reserve_initrd(void)
 	initrd_start = 0;
 
 	if (ramdisk_size >= (end_of_lowmem>>1)) {
-		memblock_x86_free_range(ramdisk_image, ramdisk_end);
+		memblock_free(ramdisk_image, ramdisk_end - ramdisk_image);
 		printk(KERN_ERR "initrd too large to handle, "
 		       "disabling initrd\n");
 		return;
@@ -416,7 +417,7 @@ static void __init reserve_initrd(void)
 
 	relocate_initrd();
 
-	memblock_x86_free_range(ramdisk_image, ramdisk_end);
+	memblock_free(ramdisk_image, ramdisk_end - ramdisk_image);
 }
 #else
 static void __init reserve_initrd(void)
@@ -490,15 +491,13 @@ static void __init memblock_x86_reserve_range_setup_data(void)
 {
 	struct setup_data *data;
 	u64 pa_data;
-	char buf[32];
 
 	if (boot_params.hdr.version < 0x0209)
 		return;
 	pa_data = boot_params.hdr.setup_data;
 	while (pa_data) {
 		data = early_memremap(pa_data, sizeof(*data));
-		sprintf(buf, "setup data %x", data->type);
-		memblock_x86_reserve_range(pa_data, pa_data+sizeof(*data)+data->len, buf);
+		memblock_reserve(pa_data, sizeof(*data) + data->len);
 		pa_data = data->next;
 		early_iounmap(data, sizeof(*data));
 	}
@@ -554,7 +553,7 @@ static void __init reserve_crashkernel(void)
 		crash_base = memblock_find_in_range(alignment,
 			       CRASH_KERNEL_ADDR_MAX, crash_size, alignment);
 
-		if (crash_base == MEMBLOCK_ERROR) {
+		if (!crash_base) {
 			pr_info("crashkernel reservation failed - No suitable area found.\n");
 			return;
 		}
@@ -568,7 +567,7 @@ static void __init reserve_crashkernel(void)
 			return;
 		}
 	}
-	memblock_x86_reserve_range(crash_base, crash_base + crash_size, "CRASH KERNEL");
+	memblock_reserve(crash_base, crash_size);
 
 	printk(KERN_INFO "Reserving %ldMB of memory at %ldMB "
 			"for crashkernel (System RAM: %ldMB)\n",
@@ -626,7 +625,7 @@ static __init void reserve_ibft_region(void)
 	addr = find_ibft_region(&size);
 
 	if (size)
-		memblock_x86_reserve_range(addr, addr + size, "* ibft");
+		memblock_reserve(addr, size);
 }
 
 static unsigned reserve_low = CONFIG_X86_RESERVE_LOW << 10;
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 9f548cb..e38e217 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -840,7 +840,8 @@ int __cpuinit native_cpu_up(unsigned int cpu)
 	pr_debug("++++++++++++++++++++=_---CPU UP  %u\n", cpu);
 
 	if (apicid == BAD_APICID || apicid == boot_cpu_physical_apicid ||
-	    !physid_isset(apicid, phys_cpu_present_map)) {
+	    !physid_isset(apicid, phys_cpu_present_map) ||
+	    (!x2apic_mode && apicid >= 255)) {
 		printk(KERN_ERR "%s: bad cpu %d\n", __func__, cpu);
 		return -EINVAL;
 	}
diff --git a/arch/x86/kernel/trampoline.c b/arch/x86/kernel/trampoline.c
index a91ae77..a73b610 100644
--- a/arch/x86/kernel/trampoline.c
+++ b/arch/x86/kernel/trampoline.c
@@ -14,11 +14,11 @@ void __init setup_trampolines(void)
 
 	/* Has to be in very low memory so we can execute real-mode AP code. */
 	mem = memblock_find_in_range(0, 1<<20, size, PAGE_SIZE);
-	if (mem == MEMBLOCK_ERROR)
+	if (!mem)
 		panic("Cannot allocate trampoline\n");
 
 	x86_trampoline_base = __va(mem);
-	memblock_x86_reserve_range(mem, mem + size, "TRAMPOLINE");
+	memblock_reserve(mem, size);
 
 	printk(KERN_DEBUG "Base memory trampoline at [%p] %llx size %zu\n",
 	       x86_trampoline_base, (unsigned long long)mem, size);
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index a8e3eb8..fa1191fb 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -306,15 +306,10 @@ dotraplinkage void __kprobes do_int3(struct pt_regs *regs, long error_code)
 			== NOTIFY_STOP)
 		return;
 #endif /* CONFIG_KGDB_LOW_LEVEL_TRAP */
-#ifdef CONFIG_KPROBES
+
 	if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP)
 			== NOTIFY_STOP)
 		return;
-#else
-	if (notify_die(DIE_TRAP, "int3", regs, error_code, 3, SIGTRAP)
-			== NOTIFY_STOP)
-		return;
-#endif
 
 	preempt_conditional_sti(regs);
 	do_trap(3, SIGTRAP, "int3", regs, error_code, NULL);
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index db48336..2c9cf0f 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -35,7 +35,7 @@ static int __read_mostly tsc_unstable;
    erroneous rdtsc usage on !cpu_has_tsc processors */
 static int __read_mostly tsc_disabled = -1;
 
-static int tsc_clocksource_reliable;
+int tsc_clocksource_reliable;
 /*
  * Scheduler clock - returns current time in nanosec units.
  */
@@ -178,11 +178,11 @@ static unsigned long calc_pmtimer_ref(u64 deltatsc, u64 pm1, u64 pm2)
 }
 
 #define CAL_MS		10
-#define CAL_LATCH	(CLOCK_TICK_RATE / (1000 / CAL_MS))
+#define CAL_LATCH	(PIT_TICK_RATE / (1000 / CAL_MS))
 #define CAL_PIT_LOOPS	1000
 
 #define CAL2_MS		50
-#define CAL2_LATCH	(CLOCK_TICK_RATE / (1000 / CAL2_MS))
+#define CAL2_LATCH	(PIT_TICK_RATE / (1000 / CAL2_MS))
 #define CAL2_PIT_LOOPS	5000
 
 
diff --git a/arch/x86/kernel/tsc_sync.c b/arch/x86/kernel/tsc_sync.c
index 0aa5fed8..9eba29b 100644
--- a/arch/x86/kernel/tsc_sync.c
+++ b/arch/x86/kernel/tsc_sync.c
@@ -113,7 +113,7 @@ void __cpuinit check_tsc_sync_source(int cpu)
 	if (unsynchronized_tsc())
 		return;
 
-	if (boot_cpu_has(X86_FEATURE_TSC_RELIABLE)) {
+	if (tsc_clocksource_reliable) {
 		if (cpu == (nr_cpu_ids-1) || system_state != SYSTEM_BOOTING)
 			pr_info(
 			"Skipped synchronization checks as TSC is reliable.\n");
@@ -172,7 +172,7 @@ void __cpuinit check_tsc_sync_target(void)
 {
 	int cpus = 2;
 
-	if (unsynchronized_tsc() || boot_cpu_has(X86_FEATURE_TSC_RELIABLE))
+	if (unsynchronized_tsc() || tsc_clocksource_reliable)
 		return;
 
 	/*
diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c
index e4d4a22..b07ba93 100644
--- a/arch/x86/kernel/vsyscall_64.c
+++ b/arch/x86/kernel/vsyscall_64.c
@@ -57,7 +57,7 @@ DEFINE_VVAR(struct vsyscall_gtod_data, vsyscall_gtod_data) =
 	.lock = __SEQLOCK_UNLOCKED(__vsyscall_gtod_data.lock),
 };
 
-static enum { EMULATE, NATIVE, NONE } vsyscall_mode = NATIVE;
+static enum { EMULATE, NATIVE, NONE } vsyscall_mode = EMULATE;
 
 static int __init vsyscall_setup(char *str)
 {
@@ -140,11 +140,40 @@ static int addr_to_vsyscall_nr(unsigned long addr)
 	return nr;
 }
 
+static bool write_ok_or_segv(unsigned long ptr, size_t size)
+{
+	/*
+	 * XXX: if access_ok, get_user, and put_user handled
+	 * sig_on_uaccess_error, this could go away.
+	 */
+
+	if (!access_ok(VERIFY_WRITE, (void __user *)ptr, size)) {
+		siginfo_t info;
+		struct thread_struct *thread = &current->thread;
+
+		thread->error_code	= 6;  /* user fault, no page, write */
+		thread->cr2		= ptr;
+		thread->trap_no		= 14;
+
+		memset(&info, 0, sizeof(info));
+		info.si_signo		= SIGSEGV;
+		info.si_errno		= 0;
+		info.si_code		= SEGV_MAPERR;
+		info.si_addr		= (void __user *)ptr;
+
+		force_sig_info(SIGSEGV, &info, current);
+		return false;
+	} else {
+		return true;
+	}
+}
+
 bool emulate_vsyscall(struct pt_regs *regs, unsigned long address)
 {
 	struct task_struct *tsk;
 	unsigned long caller;
 	int vsyscall_nr;
+	int prev_sig_on_uaccess_error;
 	long ret;
 
 	/*
@@ -180,35 +209,65 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address)
 	if (seccomp_mode(&tsk->seccomp))
 		do_exit(SIGKILL);
 
+	/*
+	 * With a real vsyscall, page faults cause SIGSEGV.  We want to
+	 * preserve that behavior to make writing exploits harder.
+	 */
+	prev_sig_on_uaccess_error = current_thread_info()->sig_on_uaccess_error;
+	current_thread_info()->sig_on_uaccess_error = 1;
+
+	/*
+	 * 0 is a valid user pointer (in the access_ok sense) on 32-bit and
+	 * 64-bit, so we don't need to special-case it here.  For all the
+	 * vsyscalls, 0 means "don't write anything" not "write it at
+	 * address 0".
+	 */
+	ret = -EFAULT;
 	switch (vsyscall_nr) {
 	case 0:
+		if (!write_ok_or_segv(regs->di, sizeof(struct timeval)) ||
+		    !write_ok_or_segv(regs->si, sizeof(struct timezone)))
+			break;
+
 		ret = sys_gettimeofday(
 			(struct timeval __user *)regs->di,
 			(struct timezone __user *)regs->si);
 		break;
 
 	case 1:
+		if (!write_ok_or_segv(regs->di, sizeof(time_t)))
+			break;
+
 		ret = sys_time((time_t __user *)regs->di);
 		break;
 
 	case 2:
+		if (!write_ok_or_segv(regs->di, sizeof(unsigned)) ||
+		    !write_ok_or_segv(regs->si, sizeof(unsigned)))
+			break;
+
 		ret = sys_getcpu((unsigned __user *)regs->di,
 				 (unsigned __user *)regs->si,
 				 0);
 		break;
 	}
 
+	current_thread_info()->sig_on_uaccess_error = prev_sig_on_uaccess_error;
+
 	if (ret == -EFAULT) {
-		/*
-		 * Bad news -- userspace fed a bad pointer to a vsyscall.
-		 *
-		 * With a real vsyscall, that would have caused SIGSEGV.
-		 * To make writing reliable exploits using the emulated
-		 * vsyscalls harder, generate SIGSEGV here as well.
-		 */
+		/* Bad news -- userspace fed a bad pointer to a vsyscall. */
 		warn_bad_vsyscall(KERN_INFO, regs,
 				  "vsyscall fault (exploit attempt?)");
-		goto sigsegv;
+
+		/*
+		 * If we failed to generate a signal for any reason,
+		 * generate one here.  (This should be impossible.)
+		 */
+		if (WARN_ON_ONCE(!sigismember(&tsk->pending.signal, SIGBUS) &&
+				 !sigismember(&tsk->pending.signal, SIGSEGV)))
+			goto sigsegv;
+
+		return true;  /* Don't emulate the ret. */
 	}
 
 	regs->ax = ret;
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index c1d6cd5..91f83e2 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -92,6 +92,7 @@ struct x86_init_ops x86_init __initdata = {
 
 struct x86_cpuinit_ops x86_cpuinit __cpuinitdata = {
 	.setup_percpu_clockev		= setup_secondary_APIC_clock,
+	.fixup_cpu_id			= x86_default_fixup_cpu_id,
 };
 
 static void default_nmi_init(void) { };
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 76e3f1c..405f262 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -338,11 +338,15 @@ static enum hrtimer_restart pit_timer_fn(struct hrtimer *data)
 		return HRTIMER_NORESTART;
 }
 
-static void create_pit_timer(struct kvm_kpit_state *ps, u32 val, int is_period)
+static void create_pit_timer(struct kvm *kvm, u32 val, int is_period)
 {
+	struct kvm_kpit_state *ps = &kvm->arch.vpit->pit_state;
 	struct kvm_timer *pt = &ps->pit_timer;
 	s64 interval;
 
+	if (!irqchip_in_kernel(kvm))
+		return;
+
 	interval = muldiv64(val, NSEC_PER_SEC, KVM_PIT_FREQ);
 
 	pr_debug("create pit timer, interval is %llu nsec\n", interval);
@@ -394,13 +398,13 @@ static void pit_load_count(struct kvm *kvm, int channel, u32 val)
         /* FIXME: enhance mode 4 precision */
 	case 4:
 		if (!(ps->flags & KVM_PIT_FLAGS_HPET_LEGACY)) {
-			create_pit_timer(ps, val, 0);
+			create_pit_timer(kvm, val, 0);
 		}
 		break;
 	case 2:
 	case 3:
 		if (!(ps->flags & KVM_PIT_FLAGS_HPET_LEGACY)){
-			create_pit_timer(ps, val, 1);
+			create_pit_timer(kvm, val, 1);
 		}
 		break;
 	default:
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index c38efd7..4c938da 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -602,7 +602,6 @@ static void update_cpuid(struct kvm_vcpu *vcpu)
 {
 	struct kvm_cpuid_entry2 *best;
 	struct kvm_lapic *apic = vcpu->arch.apic;
-	u32 timer_mode_mask;
 
 	best = kvm_find_cpuid_entry(vcpu, 1, 0);
 	if (!best)
@@ -615,15 +614,12 @@ static void update_cpuid(struct kvm_vcpu *vcpu)
 			best->ecx |= bit(X86_FEATURE_OSXSAVE);
 	}
 
-	if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
-		best->function == 0x1) {
-		best->ecx |= bit(X86_FEATURE_TSC_DEADLINE_TIMER);
-		timer_mode_mask = 3 << 17;
-	} else
-		timer_mode_mask = 1 << 17;
-
-	if (apic)
-		apic->lapic_timer.timer_mode_mask = timer_mode_mask;
+	if (apic) {
+		if (best->ecx & bit(X86_FEATURE_TSC_DEADLINE_TIMER))
+			apic->lapic_timer.timer_mode_mask = 3 << 17;
+		else
+			apic->lapic_timer.timer_mode_mask = 1 << 17;
+	}
 }
 
 int kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
@@ -2135,6 +2131,9 @@ int kvm_dev_ioctl_check_extension(long ext)
 	case KVM_CAP_TSC_CONTROL:
 		r = kvm_has_tsc_control;
 		break;
+	case KVM_CAP_TSC_DEADLINE_TIMER:
+		r = boot_cpu_has(X86_FEATURE_TSC_DEADLINE_TIMER);
+		break;
 	default:
 		r = 0;
 		break;
diff --git a/arch/x86/lib/inat.c b/arch/x86/lib/inat.c
index 46fc4ee..88ad5fb 100644
--- a/arch/x86/lib/inat.c
+++ b/arch/x86/lib/inat.c
@@ -82,9 +82,16 @@ insn_attr_t inat_get_avx_attribute(insn_byte_t opcode, insn_byte_t vex_m,
 	const insn_attr_t *table;
 	if (vex_m > X86_VEX_M_MAX || vex_p > INAT_LSTPFX_MAX)
 		return 0;
-	table = inat_avx_tables[vex_m][vex_p];
+	/* At first, this checks the master table */
+	table = inat_avx_tables[vex_m][0];
 	if (!table)
 		return 0;
+	if (!inat_is_group(table[opcode]) && vex_p) {
+		/* If this is not a group, get attribute directly */
+		table = inat_avx_tables[vex_m][vex_p];
+		if (!table)
+			return 0;
+	}
 	return table[opcode];
 }
 
diff --git a/arch/x86/lib/insn.c b/arch/x86/lib/insn.c
index 374562e..5a1f9f3 100644
--- a/arch/x86/lib/insn.c
+++ b/arch/x86/lib/insn.c
@@ -202,7 +202,7 @@ void insn_get_opcode(struct insn *insn)
 		m = insn_vex_m_bits(insn);
 		p = insn_vex_p_bits(insn);
 		insn->attr = inat_get_avx_attribute(op, m, p);
-		if (!inat_accept_vex(insn->attr))
+		if (!inat_accept_vex(insn->attr) && !inat_is_group(insn->attr))
 			insn->attr = 0;	/* This instruction is bad */
 		goto end;	/* VEX has only 1 byte for opcode */
 	}
@@ -249,6 +249,8 @@ void insn_get_modrm(struct insn *insn)
 			pfx = insn_last_prefix(insn);
 			insn->attr = inat_get_group_attribute(mod, pfx,
 							      insn->attr);
+			if (insn_is_avx(insn) && !inat_accept_vex(insn->attr))
+				insn->attr = 0;	/* This is bad */
 		}
 	}
 
diff --git a/arch/x86/lib/string_32.c b/arch/x86/lib/string_32.c
index 82004d2..bd59090 100644
--- a/arch/x86/lib/string_32.c
+++ b/arch/x86/lib/string_32.c
@@ -164,15 +164,13 @@ EXPORT_SYMBOL(strchr);
 size_t strlen(const char *s)
 {
 	int d0;
-	int res;
+	size_t res;
 	asm volatile("repne\n\t"
-		"scasb\n\t"
-		"notl %0\n\t"
-		"decl %0"
+		"scasb"
 		: "=c" (res), "=&D" (d0)
 		: "1" (s), "a" (0), "0" (0xffffffffu)
 		: "memory");
-	return res;
+	return ~res - 1;
 }
 EXPORT_SYMBOL(strlen);
 #endif
diff --git a/arch/x86/lib/x86-opcode-map.txt b/arch/x86/lib/x86-opcode-map.txt
index a793da5..5b83c51 100644
--- a/arch/x86/lib/x86-opcode-map.txt
+++ b/arch/x86/lib/x86-opcode-map.txt
@@ -1,5 +1,11 @@
 # x86 Opcode Maps
 #
+# This is (mostly) based on following documentations.
+# - Intel(R) 64 and IA-32 Architectures Software Developer's Manual Vol.2
+#   (#325383-040US, October 2011)
+# - Intel(R) Advanced Vector Extensions Programming Reference
+#   (#319433-011,JUNE 2011).
+#
 #<Opcode maps>
 # Table: table-name
 # Referrer: escaped-name
@@ -15,10 +21,13 @@
 # EndTable
 #
 # AVX Superscripts
-#  (VEX): this opcode can accept VEX prefix.
-#  (oVEX): this opcode requires VEX prefix.
-#  (o128): this opcode only supports 128bit VEX.
-#  (o256): this opcode only supports 256bit VEX.
+#  (v): this opcode requires VEX prefix.
+#  (v1): this opcode only supports 128bit VEX.
+#
+# Last Prefix Superscripts
+#  - (66): the last prefix is 0x66
+#  - (F3): the last prefix is 0xF3
+#  - (F2): the last prefix is 0xF2
 #
 
 Table: one byte opcode
@@ -199,8 +208,8 @@ a0: MOV AL,Ob
 a1: MOV rAX,Ov
 a2: MOV Ob,AL
 a3: MOV Ov,rAX
-a4: MOVS/B Xb,Yb
-a5: MOVS/W/D/Q Xv,Yv
+a4: MOVS/B Yb,Xb
+a5: MOVS/W/D/Q Yv,Xv
 a6: CMPS/B Xb,Yb
 a7: CMPS/W/D Xv,Yv
 a8: TEST AL,Ib
@@ -233,8 +242,8 @@ c0: Grp2 Eb,Ib (1A)
 c1: Grp2 Ev,Ib (1A)
 c2: RETN Iw (f64)
 c3: RETN
-c4: LES Gz,Mp (i64) | 3bytes-VEX (Prefix)
-c5: LDS Gz,Mp (i64) | 2bytes-VEX (Prefix)
+c4: LES Gz,Mp (i64) | VEX+2byte (Prefix)
+c5: LDS Gz,Mp (i64) | VEX+1byte (Prefix)
 c6: Grp11 Eb,Ib (1A)
 c7: Grp11 Ev,Iz (1A)
 c8: ENTER Iw,Ib
@@ -320,14 +329,19 @@ AVXcode: 1
 # 3DNow! uses the last imm byte as opcode extension.
 0f: 3DNow! Pq,Qq,Ib
 # 0x0f 0x10-0x1f
-10: movups Vps,Wps (VEX) | movss Vss,Wss (F3),(VEX),(o128) | movupd Vpd,Wpd (66),(VEX) | movsd Vsd,Wsd (F2),(VEX),(o128)
-11: movups Wps,Vps (VEX) | movss Wss,Vss (F3),(VEX),(o128) | movupd Wpd,Vpd (66),(VEX) | movsd Wsd,Vsd (F2),(VEX),(o128)
-12: movlps Vq,Mq (VEX),(o128) | movlpd Vq,Mq (66),(VEX),(o128) | movhlps Vq,Uq (VEX),(o128) | movddup Vq,Wq (F2),(VEX) | movsldup Vq,Wq (F3),(VEX)
-13: mpvlps Mq,Vq (VEX),(o128) | movlpd Mq,Vq (66),(VEX),(o128)
-14: unpcklps Vps,Wq (VEX) | unpcklpd Vpd,Wq (66),(VEX)
-15: unpckhps Vps,Wq (VEX) | unpckhpd Vpd,Wq (66),(VEX)
-16: movhps Vq,Mq (VEX),(o128) | movhpd Vq,Mq (66),(VEX),(o128) | movlsps Vq,Uq (VEX),(o128) | movshdup Vq,Wq (F3),(VEX)
-17: movhps Mq,Vq (VEX),(o128) | movhpd Mq,Vq (66),(VEX),(o128)
+# NOTE: According to Intel SDM opcode map, vmovups and vmovupd has no operands
+# but it actually has operands. And also, vmovss and vmovsd only accept 128bit.
+# MOVSS/MOVSD has too many forms(3) on SDM. This map just shows a typical form.
+# Many AVX instructions lack v1 superscript, according to Intel AVX-Prgramming
+# Reference A.1
+10: vmovups Vps,Wps | vmovupd Vpd,Wpd (66) | vmovss Vx,Hx,Wss (F3),(v1) | vmovsd Vx,Hx,Wsd (F2),(v1)
+11: vmovups Wps,Vps | vmovupd Wpd,Vpd (66) | vmovss Wss,Hx,Vss (F3),(v1) | vmovsd Wsd,Hx,Vsd (F2),(v1)
+12: vmovlps Vq,Hq,Mq (v1) | vmovhlps Vq,Hq,Uq (v1) | vmovlpd Vq,Hq,Mq (66),(v1) | vmovsldup Vx,Wx (F3) | vmovddup Vx,Wx (F2)
+13: vmovlps Mq,Vq (v1) | vmovlpd Mq,Vq (66),(v1)
+14: vunpcklps Vx,Hx,Wx | vunpcklpd Vx,Hx,Wx (66)
+15: vunpckhps Vx,Hx,Wx | vunpckhpd Vx,Hx,Wx (66)
+16: vmovhps Vdq,Hq,Mq (v1) | vmovlhps Vdq,Hq,Uq (v1) | vmovhpd Vdq,Hq,Mq (66),(v1) | vmovshdup Vx,Wx (F3)
+17: vmovhps Mq,Vq (v1) | vmovhpd Mq,Vq (66),(v1)
 18: Grp16 (1A)
 19:
 1a:
@@ -345,14 +359,14 @@ AVXcode: 1
 25:
 26:
 27:
-28: movaps Vps,Wps (VEX) | movapd Vpd,Wpd (66),(VEX)
-29: movaps Wps,Vps (VEX) | movapd Wpd,Vpd (66),(VEX)
-2a: cvtpi2ps Vps,Qpi | cvtsi2ss Vss,Ed/q (F3),(VEX),(o128) | cvtpi2pd Vpd,Qpi (66) | cvtsi2sd Vsd,Ed/q (F2),(VEX),(o128)
-2b: movntps Mps,Vps (VEX) | movntpd Mpd,Vpd (66),(VEX)
-2c: cvttps2pi Ppi,Wps | cvttss2si  Gd/q,Wss (F3),(VEX),(o128) | cvttpd2pi Ppi,Wpd (66) | cvttsd2si Gd/q,Wsd (F2),(VEX),(o128)
-2d: cvtps2pi Ppi,Wps | cvtss2si Gd/q,Wss (F3),(VEX),(o128) | cvtpd2pi Qpi,Wpd (66) | cvtsd2si Gd/q,Wsd (F2),(VEX),(o128)
-2e: ucomiss Vss,Wss (VEX),(o128) | ucomisd  Vsd,Wsd (66),(VEX),(o128)
-2f: comiss Vss,Wss (VEX),(o128) | comisd  Vsd,Wsd (66),(VEX),(o128)
+28: vmovaps Vps,Wps | vmovapd Vpd,Wpd (66)
+29: vmovaps Wps,Vps | vmovapd Wpd,Vpd (66)
+2a: cvtpi2ps Vps,Qpi | cvtpi2pd Vpd,Qpi (66) | vcvtsi2ss Vss,Hss,Ey (F3),(v1) | vcvtsi2sd Vsd,Hsd,Ey (F2),(v1)
+2b: vmovntps Mps,Vps | vmovntpd Mpd,Vpd (66)
+2c: cvttps2pi Ppi,Wps | cvttpd2pi Ppi,Wpd (66) | vcvttss2si Gy,Wss (F3),(v1) | vcvttsd2si Gy,Wsd (F2),(v1)
+2d: cvtps2pi Ppi,Wps | cvtpd2pi Qpi,Wpd (66) | vcvtss2si Gy,Wss (F3),(v1) | vcvtsd2si Gy,Wsd (F2),(v1)
+2e: vucomiss Vss,Wss (v1) | vucomisd  Vsd,Wsd (66),(v1)
+2f: vcomiss Vss,Wss (v1) | vcomisd  Vsd,Wsd (66),(v1)
 # 0x0f 0x30-0x3f
 30: WRMSR
 31: RDTSC
@@ -388,65 +402,66 @@ AVXcode: 1
 4e: CMOVLE/NG Gv,Ev
 4f: CMOVNLE/G Gv,Ev
 # 0x0f 0x50-0x5f
-50: movmskps Gd/q,Ups (VEX) | movmskpd Gd/q,Upd (66),(VEX)
-51: sqrtps Vps,Wps (VEX) | sqrtss Vss,Wss (F3),(VEX),(o128) | sqrtpd Vpd,Wpd (66),(VEX) | sqrtsd Vsd,Wsd (F2),(VEX),(o128)
-52: rsqrtps Vps,Wps (VEX) | rsqrtss Vss,Wss (F3),(VEX),(o128)
-53: rcpps Vps,Wps (VEX) | rcpss Vss,Wss (F3),(VEX),(o128)
-54: andps Vps,Wps (VEX) | andpd Vpd,Wpd (66),(VEX)
-55: andnps Vps,Wps (VEX) | andnpd Vpd,Wpd (66),(VEX)
-56: orps Vps,Wps (VEX) | orpd Vpd,Wpd (66),(VEX)
-57: xorps Vps,Wps (VEX) | xorpd Vpd,Wpd (66),(VEX)
-58: addps Vps,Wps (VEX) | addss Vss,Wss (F3),(VEX),(o128) | addpd Vpd,Wpd (66),(VEX) | addsd Vsd,Wsd (F2),(VEX),(o128)
-59: mulps Vps,Wps (VEX) | mulss Vss,Wss (F3),(VEX),(o128) | mulpd Vpd,Wpd (66),(VEX) | mulsd Vsd,Wsd (F2),(VEX),(o128)
-5a: cvtps2pd Vpd,Wps (VEX) | cvtss2sd Vsd,Wss (F3),(VEX),(o128) | cvtpd2ps Vps,Wpd (66),(VEX) | cvtsd2ss Vsd,Wsd (F2),(VEX),(o128)
-5b: cvtdq2ps Vps,Wdq (VEX) | cvtps2dq Vdq,Wps (66),(VEX) | cvttps2dq Vdq,Wps (F3),(VEX)
-5c: subps Vps,Wps (VEX) | subss Vss,Wss (F3),(VEX),(o128) | subpd Vpd,Wpd (66),(VEX) | subsd Vsd,Wsd (F2),(VEX),(o128)
-5d: minps Vps,Wps (VEX) | minss Vss,Wss (F3),(VEX),(o128) | minpd Vpd,Wpd (66),(VEX) | minsd Vsd,Wsd (F2),(VEX),(o128)
-5e: divps Vps,Wps (VEX) | divss Vss,Wss (F3),(VEX),(o128) | divpd Vpd,Wpd (66),(VEX) | divsd Vsd,Wsd (F2),(VEX),(o128)
-5f: maxps Vps,Wps (VEX) | maxss Vss,Wss (F3),(VEX),(o128) | maxpd Vpd,Wpd (66),(VEX) | maxsd Vsd,Wsd (F2),(VEX),(o128)
+50: vmovmskps Gy,Ups | vmovmskpd Gy,Upd (66)
+51: vsqrtps Vps,Wps | vsqrtpd Vpd,Wpd (66) | vsqrtss Vss,Hss,Wss (F3),(v1) | vsqrtsd Vsd,Hsd,Wsd (F2),(v1)
+52: vrsqrtps Vps,Wps | vrsqrtss Vss,Hss,Wss (F3),(v1)
+53: vrcpps Vps,Wps | vrcpss Vss,Hss,Wss (F3),(v1)
+54: vandps Vps,Hps,Wps | vandpd Vpd,Hpd,Wpd (66)
+55: vandnps Vps,Hps,Wps | vandnpd Vpd,Hpd,Wpd (66)
+56: vorps Vps,Hps,Wps | vorpd Vpd,Hpd,Wpd (66)
+57: vxorps Vps,Hps,Wps | vxorpd Vpd,Hpd,Wpd (66)
+58: vaddps Vps,Hps,Wps | vaddpd Vpd,Hpd,Wpd (66) | vaddss Vss,Hss,Wss (F3),(v1) | vaddsd Vsd,Hsd,Wsd (F2),(v1)
+59: vmulps Vps,Hps,Wps | vmulpd Vpd,Hpd,Wpd (66) | vmulss Vss,Hss,Wss (F3),(v1) | vmulsd Vsd,Hsd,Wsd (F2),(v1)
+5a: vcvtps2pd Vpd,Wps | vcvtpd2ps Vps,Wpd (66) | vcvtss2sd Vsd,Hx,Wss (F3),(v1) | vcvtsd2ss Vss,Hx,Wsd (F2),(v1)
+5b: vcvtdq2ps Vps,Wdq | vcvtps2dq Vdq,Wps (66) | vcvttps2dq Vdq,Wps (F3)
+5c: vsubps Vps,Hps,Wps | vsubpd Vpd,Hpd,Wpd (66) | vsubss Vss,Hss,Wss (F3),(v1) | vsubsd Vsd,Hsd,Wsd (F2),(v1)
+5d: vminps Vps,Hps,Wps | vminpd Vpd,Hpd,Wpd (66) | vminss Vss,Hss,Wss (F3),(v1) | vminsd Vsd,Hsd,Wsd (F2),(v1)
+5e: vdivps Vps,Hps,Wps | vdivpd Vpd,Hpd,Wpd (66) | vdivss Vss,Hss,Wss (F3),(v1) | vdivsd Vsd,Hsd,Wsd (F2),(v1)
+5f: vmaxps Vps,Hps,Wps | vmaxpd Vpd,Hpd,Wpd (66) | vmaxss Vss,Hss,Wss (F3),(v1) | vmaxsd Vsd,Hsd,Wsd (F2),(v1)
 # 0x0f 0x60-0x6f
-60: punpcklbw Pq,Qd | punpcklbw Vdq,Wdq (66),(VEX),(o128)
-61: punpcklwd Pq,Qd | punpcklwd Vdq,Wdq (66),(VEX),(o128)
-62: punpckldq Pq,Qd | punpckldq Vdq,Wdq (66),(VEX),(o128)
-63: packsswb Pq,Qq | packsswb Vdq,Wdq (66),(VEX),(o128)
-64: pcmpgtb Pq,Qq | pcmpgtb Vdq,Wdq (66),(VEX),(o128)
-65: pcmpgtw Pq,Qq | pcmpgtw Vdq,Wdq (66),(VEX),(o128)
-66: pcmpgtd Pq,Qq | pcmpgtd Vdq,Wdq (66),(VEX),(o128)
-67: packuswb Pq,Qq | packuswb Vdq,Wdq (66),(VEX),(o128)
-68: punpckhbw Pq,Qd | punpckhbw Vdq,Wdq (66),(VEX),(o128)
-69: punpckhwd Pq,Qd | punpckhwd Vdq,Wdq (66),(VEX),(o128)
-6a: punpckhdq Pq,Qd | punpckhdq Vdq,Wdq (66),(VEX),(o128)
-6b: packssdw Pq,Qd | packssdw Vdq,Wdq (66),(VEX),(o128)
-6c: punpcklqdq Vdq,Wdq (66),(VEX),(o128)
-6d: punpckhqdq Vdq,Wdq (66),(VEX),(o128)
-6e: movd/q/ Pd,Ed/q | movd/q Vdq,Ed/q (66),(VEX),(o128)
-6f: movq Pq,Qq | movdqa Vdq,Wdq (66),(VEX) | movdqu Vdq,Wdq (F3),(VEX)
+60: punpcklbw Pq,Qd | vpunpcklbw Vx,Hx,Wx (66),(v1)
+61: punpcklwd Pq,Qd | vpunpcklwd Vx,Hx,Wx (66),(v1)
+62: punpckldq Pq,Qd | vpunpckldq Vx,Hx,Wx (66),(v1)
+63: packsswb Pq,Qq | vpacksswb Vx,Hx,Wx (66),(v1)
+64: pcmpgtb Pq,Qq | vpcmpgtb Vx,Hx,Wx (66),(v1)
+65: pcmpgtw Pq,Qq | vpcmpgtw Vx,Hx,Wx (66),(v1)
+66: pcmpgtd Pq,Qq | vpcmpgtd Vx,Hx,Wx (66),(v1)
+67: packuswb Pq,Qq | vpackuswb Vx,Hx,Wx (66),(v1)
+68: punpckhbw Pq,Qd | vpunpckhbw Vx,Hx,Wx (66),(v1)
+69: punpckhwd Pq,Qd | vpunpckhwd Vx,Hx,Wx (66),(v1)
+6a: punpckhdq Pq,Qd | vpunpckhdq Vx,Hx,Wx (66),(v1)
+6b: packssdw Pq,Qd | vpackssdw Vx,Hx,Wx (66),(v1)
+6c: vpunpcklqdq Vx,Hx,Wx (66),(v1)
+6d: vpunpckhqdq Vx,Hx,Wx (66),(v1)
+6e: movd/q Pd,Ey | vmovd/q Vy,Ey (66),(v1)
+6f: movq Pq,Qq | vmovdqa Vx,Wx (66) | vmovdqu Vx,Wx (F3)
 # 0x0f 0x70-0x7f
-70: pshufw Pq,Qq,Ib | pshufd Vdq,Wdq,Ib (66),(VEX),(o128) | pshufhw Vdq,Wdq,Ib (F3),(VEX),(o128) | pshuflw VdqWdq,Ib (F2),(VEX),(o128)
+70: pshufw Pq,Qq,Ib | vpshufd Vx,Wx,Ib (66),(v1) | vpshufhw Vx,Wx,Ib (F3),(v1) | vpshuflw Vx,Wx,Ib (F2),(v1)
 71: Grp12 (1A)
 72: Grp13 (1A)
 73: Grp14 (1A)
-74: pcmpeqb Pq,Qq | pcmpeqb Vdq,Wdq (66),(VEX),(o128)
-75: pcmpeqw Pq,Qq | pcmpeqw Vdq,Wdq (66),(VEX),(o128)
-76: pcmpeqd Pq,Qq | pcmpeqd Vdq,Wdq (66),(VEX),(o128)
-77: emms/vzeroupper/vzeroall (VEX)
-78: VMREAD Ed/q,Gd/q
-79: VMWRITE Gd/q,Ed/q
+74: pcmpeqb Pq,Qq | vpcmpeqb Vx,Hx,Wx (66),(v1)
+75: pcmpeqw Pq,Qq | vpcmpeqw Vx,Hx,Wx (66),(v1)
+76: pcmpeqd Pq,Qq | vpcmpeqd Vx,Hx,Wx (66),(v1)
+# Note: Remove (v), because vzeroall and vzeroupper becomes emms without VEX.
+77: emms | vzeroupper | vzeroall
+78: VMREAD Ey,Gy
+79: VMWRITE Gy,Ey
 7a:
 7b:
-7c: haddps Vps,Wps (F2),(VEX) | haddpd Vpd,Wpd (66),(VEX)
-7d: hsubps Vps,Wps (F2),(VEX) | hsubpd Vpd,Wpd (66),(VEX)
-7e: movd/q Ed/q,Pd | movd/q Ed/q,Vdq (66),(VEX),(o128) | movq Vq,Wq (F3),(VEX),(o128)
-7f: movq Qq,Pq | movdqa Wdq,Vdq (66),(VEX) | movdqu Wdq,Vdq (F3),(VEX)
+7c: vhaddpd Vpd,Hpd,Wpd (66) | vhaddps Vps,Hps,Wps (F2)
+7d: vhsubpd Vpd,Hpd,Wpd (66) | vhsubps Vps,Hps,Wps (F2)
+7e: movd/q Ey,Pd | vmovd/q Ey,Vy (66),(v1) | vmovq Vq,Wq (F3),(v1)
+7f: movq Qq,Pq | vmovdqa Wx,Vx (66) | vmovdqu Wx,Vx (F3)
 # 0x0f 0x80-0x8f
 80: JO Jz (f64)
 81: JNO Jz (f64)
-82: JB/JNAE/JC Jz (f64)
-83: JNB/JAE/JNC Jz (f64)
-84: JZ/JE Jz (f64)
-85: JNZ/JNE Jz (f64)
+82: JB/JC/JNAE Jz (f64)
+83: JAE/JNB/JNC Jz (f64)
+84: JE/JZ Jz (f64)
+85: JNE/JNZ Jz (f64)
 86: JBE/JNA Jz (f64)
-87: JNBE/JA Jz (f64)
+87: JA/JNBE Jz (f64)
 88: JS Jz (f64)
 89: JNS Jz (f64)
 8a: JP/JPE Jz (f64)
@@ -502,18 +517,18 @@ b8: JMPE | POPCNT Gv,Ev (F3)
 b9: Grp10 (1A)
 ba: Grp8 Ev,Ib (1A)
 bb: BTC Ev,Gv
-bc: BSF Gv,Ev
-bd: BSR Gv,Ev
+bc: BSF Gv,Ev | TZCNT Gv,Ev (F3)
+bd: BSR Gv,Ev | LZCNT Gv,Ev (F3)
 be: MOVSX Gv,Eb
 bf: MOVSX Gv,Ew
 # 0x0f 0xc0-0xcf
 c0: XADD Eb,Gb
 c1: XADD Ev,Gv
-c2: cmpps Vps,Wps,Ib (VEX) | cmpss Vss,Wss,Ib (F3),(VEX),(o128) | cmppd Vpd,Wpd,Ib (66),(VEX) | cmpsd Vsd,Wsd,Ib (F2),(VEX)
-c3: movnti Md/q,Gd/q
-c4: pinsrw Pq,Rd/q/Mw,Ib | pinsrw Vdq,Rd/q/Mw,Ib (66),(VEX),(o128)
-c5: pextrw Gd,Nq,Ib | pextrw Gd,Udq,Ib (66),(VEX),(o128)
-c6: shufps Vps,Wps,Ib (VEX) | shufpd Vpd,Wpd,Ib (66),(VEX)
+c2: vcmpps Vps,Hps,Wps,Ib | vcmppd Vpd,Hpd,Wpd,Ib (66) | vcmpss Vss,Hss,Wss,Ib (F3),(v1) | vcmpsd Vsd,Hsd,Wsd,Ib (F2),(v1)
+c3: movnti My,Gy
+c4: pinsrw Pq,Ry/Mw,Ib | vpinsrw Vdq,Hdq,Ry/Mw,Ib (66),(v1)
+c5: pextrw Gd,Nq,Ib | vpextrw Gd,Udq,Ib (66),(v1)
+c6: vshufps Vps,Hps,Wps,Ib | vshufpd Vpd,Hpd,Wpd,Ib (66)
 c7: Grp9 (1A)
 c8: BSWAP RAX/EAX/R8/R8D
 c9: BSWAP RCX/ECX/R9/R9D
@@ -524,55 +539,55 @@ cd: BSWAP RBP/EBP/R13/R13D
 ce: BSWAP RSI/ESI/R14/R14D
 cf: BSWAP RDI/EDI/R15/R15D
 # 0x0f 0xd0-0xdf
-d0: addsubps Vps,Wps (F2),(VEX) | addsubpd Vpd,Wpd (66),(VEX)
-d1: psrlw Pq,Qq | psrlw Vdq,Wdq (66),(VEX),(o128)
-d2: psrld Pq,Qq | psrld Vdq,Wdq (66),(VEX),(o128)
-d3: psrlq Pq,Qq | psrlq Vdq,Wdq (66),(VEX),(o128)
-d4: paddq Pq,Qq | paddq Vdq,Wdq (66),(VEX),(o128)
-d5: pmullw Pq,Qq | pmullw Vdq,Wdq (66),(VEX),(o128)
-d6: movq Wq,Vq (66),(VEX),(o128) | movq2dq Vdq,Nq (F3) | movdq2q Pq,Uq (F2)
-d7: pmovmskb Gd,Nq | pmovmskb Gd,Udq (66),(VEX),(o128)
-d8: psubusb Pq,Qq | psubusb Vdq,Wdq (66),(VEX),(o128)
-d9: psubusw Pq,Qq | psubusw Vdq,Wdq (66),(VEX),(o128)
-da: pminub Pq,Qq | pminub Vdq,Wdq (66),(VEX),(o128)
-db: pand Pq,Qq | pand Vdq,Wdq (66),(VEX),(o128)
-dc: paddusb Pq,Qq | paddusb Vdq,Wdq (66),(VEX),(o128)
-dd: paddusw Pq,Qq | paddusw Vdq,Wdq (66),(VEX),(o128)
-de: pmaxub Pq,Qq | pmaxub Vdq,Wdq (66),(VEX),(o128)
-df: pandn Pq,Qq | pandn Vdq,Wdq (66),(VEX),(o128)
+d0: vaddsubpd Vpd,Hpd,Wpd (66) | vaddsubps Vps,Hps,Wps (F2)
+d1: psrlw Pq,Qq | vpsrlw Vx,Hx,Wx (66),(v1)
+d2: psrld Pq,Qq | vpsrld Vx,Hx,Wx (66),(v1)
+d3: psrlq Pq,Qq | vpsrlq Vx,Hx,Wx (66),(v1)
+d4: paddq Pq,Qq | vpaddq Vx,Hx,Wx (66),(v1)
+d5: pmullw Pq,Qq | vpmullw Vx,Hx,Wx (66),(v1)
+d6: vmovq Wq,Vq (66),(v1) | movq2dq Vdq,Nq (F3) | movdq2q Pq,Uq (F2)
+d7: pmovmskb Gd,Nq | vpmovmskb Gd,Ux (66),(v1)
+d8: psubusb Pq,Qq | vpsubusb Vx,Hx,Wx (66),(v1)
+d9: psubusw Pq,Qq | vpsubusw Vx,Hx,Wx (66),(v1)
+da: pminub Pq,Qq | vpminub Vx,Hx,Wx (66),(v1)
+db: pand Pq,Qq | vpand Vx,Hx,Wx (66),(v1)
+dc: paddusb Pq,Qq | vpaddusb Vx,Hx,Wx (66),(v1)
+dd: paddusw Pq,Qq | vpaddusw Vx,Hx,Wx (66),(v1)
+de: pmaxub Pq,Qq | vpmaxub Vx,Hx,Wx (66),(v1)
+df: pandn Pq,Qq | vpandn Vx,Hx,Wx (66),(v1)
 # 0x0f 0xe0-0xef
-e0: pavgb Pq,Qq | pavgb Vdq,Wdq (66),(VEX),(o128)
-e1: psraw Pq,Qq | psraw Vdq,Wdq (66),(VEX),(o128)
-e2: psrad Pq,Qq | psrad Vdq,Wdq (66),(VEX),(o128)
-e3: pavgw Pq,Qq | pavgw Vdq,Wdq (66),(VEX),(o128)
-e4: pmulhuw Pq,Qq | pmulhuw Vdq,Wdq (66),(VEX),(o128)
-e5: pmulhw Pq,Qq | pmulhw Vdq,Wdq (66),(VEX),(o128)
-e6: cvtpd2dq Vdq,Wpd (F2),(VEX) | cvttpd2dq Vdq,Wpd (66),(VEX) | cvtdq2pd Vpd,Wdq (F3),(VEX)
-e7: movntq Mq,Pq | movntdq Mdq,Vdq (66),(VEX)
-e8: psubsb Pq,Qq | psubsb Vdq,Wdq (66),(VEX),(o128)
-e9: psubsw Pq,Qq | psubsw Vdq,Wdq (66),(VEX),(o128)
-ea: pminsw Pq,Qq | pminsw Vdq,Wdq (66),(VEX),(o128)
-eb: por Pq,Qq | por Vdq,Wdq (66),(VEX),(o128)
-ec: paddsb Pq,Qq | paddsb Vdq,Wdq (66),(VEX),(o128)
-ed: paddsw Pq,Qq | paddsw Vdq,Wdq (66),(VEX),(o128)
-ee: pmaxsw Pq,Qq | pmaxsw Vdq,Wdq (66),(VEX),(o128)
-ef: pxor Pq,Qq | pxor Vdq,Wdq (66),(VEX),(o128)
+e0: pavgb Pq,Qq | vpavgb Vx,Hx,Wx (66),(v1)
+e1: psraw Pq,Qq | vpsraw Vx,Hx,Wx (66),(v1)
+e2: psrad Pq,Qq | vpsrad Vx,Hx,Wx (66),(v1)
+e3: pavgw Pq,Qq | vpavgw Vx,Hx,Wx (66),(v1)
+e4: pmulhuw Pq,Qq | vpmulhuw Vx,Hx,Wx (66),(v1)
+e5: pmulhw Pq,Qq | vpmulhw Vx,Hx,Wx (66),(v1)
+e6: vcvttpd2dq Vx,Wpd (66) | vcvtdq2pd Vx,Wdq (F3) | vcvtpd2dq Vx,Wpd (F2)
+e7: movntq Mq,Pq | vmovntdq Mx,Vx (66)
+e8: psubsb Pq,Qq | vpsubsb Vx,Hx,Wx (66),(v1)
+e9: psubsw Pq,Qq | vpsubsw Vx,Hx,Wx (66),(v1)
+ea: pminsw Pq,Qq | vpminsw Vx,Hx,Wx (66),(v1)
+eb: por Pq,Qq | vpor Vx,Hx,Wx (66),(v1)
+ec: paddsb Pq,Qq | vpaddsb Vx,Hx,Wx (66),(v1)
+ed: paddsw Pq,Qq | vpaddsw Vx,Hx,Wx (66),(v1)
+ee: pmaxsw Pq,Qq | vpmaxsw Vx,Hx,Wx (66),(v1)
+ef: pxor Pq,Qq | vpxor Vx,Hx,Wx (66),(v1)
 # 0x0f 0xf0-0xff
-f0: lddqu Vdq,Mdq (F2),(VEX)
-f1: psllw Pq,Qq | psllw Vdq,Wdq (66),(VEX),(o128)
-f2: pslld Pq,Qq | pslld Vdq,Wdq (66),(VEX),(o128)
-f3: psllq Pq,Qq | psllq Vdq,Wdq (66),(VEX),(o128)
-f4: pmuludq Pq,Qq | pmuludq Vdq,Wdq (66),(VEX),(o128)
-f5: pmaddwd Pq,Qq | pmaddwd Vdq,Wdq (66),(VEX),(o128)
-f6: psadbw Pq,Qq | psadbw Vdq,Wdq (66),(VEX),(o128)
-f7: maskmovq Pq,Nq | maskmovdqu Vdq,Udq (66),(VEX),(o128)
-f8: psubb Pq,Qq | psubb Vdq,Wdq (66),(VEX),(o128)
-f9: psubw Pq,Qq | psubw Vdq,Wdq (66),(VEX),(o128)
-fa: psubd Pq,Qq | psubd Vdq,Wdq (66),(VEX),(o128)
-fb: psubq Pq,Qq | psubq Vdq,Wdq (66),(VEX),(o128)
-fc: paddb Pq,Qq | paddb Vdq,Wdq (66),(VEX),(o128)
-fd: paddw Pq,Qq | paddw Vdq,Wdq (66),(VEX),(o128)
-fe: paddd Pq,Qq | paddd Vdq,Wdq (66),(VEX),(o128)
+f0: vlddqu Vx,Mx (F2)
+f1: psllw Pq,Qq | vpsllw Vx,Hx,Wx (66),(v1)
+f2: pslld Pq,Qq | vpslld Vx,Hx,Wx (66),(v1)
+f3: psllq Pq,Qq | vpsllq Vx,Hx,Wx (66),(v1)
+f4: pmuludq Pq,Qq | vpmuludq Vx,Hx,Wx (66),(v1)
+f5: pmaddwd Pq,Qq | vpmaddwd Vx,Hx,Wx (66),(v1)
+f6: psadbw Pq,Qq | vpsadbw Vx,Hx,Wx (66),(v1)
+f7: maskmovq Pq,Nq | vmaskmovdqu Vx,Ux (66),(v1)
+f8: psubb Pq,Qq | vpsubb Vx,Hx,Wx (66),(v1)
+f9: psubw Pq,Qq | vpsubw Vx,Hx,Wx (66),(v1)
+fa: psubd Pq,Qq | vpsubd Vx,Hx,Wx (66),(v1)
+fb: psubq Pq,Qq | vpsubq Vx,Hx,Wx (66),(v1)
+fc: paddb Pq,Qq | vpaddb Vx,Hx,Wx (66),(v1)
+fd: paddw Pq,Qq | vpaddw Vx,Hx,Wx (66),(v1)
+fe: paddd Pq,Qq | vpaddd Vx,Hx,Wx (66),(v1)
 ff:
 EndTable
 
@@ -580,155 +595,193 @@ Table: 3-byte opcode 1 (0x0f 0x38)
 Referrer: 3-byte escape 1
 AVXcode: 2
 # 0x0f 0x38 0x00-0x0f
-00: pshufb Pq,Qq | pshufb Vdq,Wdq (66),(VEX),(o128)
-01: phaddw Pq,Qq | phaddw Vdq,Wdq (66),(VEX),(o128)
-02: phaddd Pq,Qq | phaddd Vdq,Wdq (66),(VEX),(o128)
-03: phaddsw Pq,Qq | phaddsw Vdq,Wdq (66),(VEX),(o128)
-04: pmaddubsw Pq,Qq | pmaddubsw Vdq,Wdq (66),(VEX),(o128)
-05: phsubw Pq,Qq | phsubw Vdq,Wdq (66),(VEX),(o128)
-06: phsubd Pq,Qq | phsubd Vdq,Wdq (66),(VEX),(o128)
-07: phsubsw Pq,Qq | phsubsw Vdq,Wdq (66),(VEX),(o128)
-08: psignb Pq,Qq | psignb Vdq,Wdq (66),(VEX),(o128)
-09: psignw Pq,Qq | psignw Vdq,Wdq (66),(VEX),(o128)
-0a: psignd Pq,Qq | psignd Vdq,Wdq (66),(VEX),(o128)
-0b: pmulhrsw Pq,Qq | pmulhrsw Vdq,Wdq (66),(VEX),(o128)
-0c: Vpermilps /r (66),(oVEX)
-0d: Vpermilpd /r (66),(oVEX)
-0e: vtestps /r (66),(oVEX)
-0f: vtestpd /r (66),(oVEX)
+00: pshufb Pq,Qq | vpshufb Vx,Hx,Wx (66),(v1)
+01: phaddw Pq,Qq | vphaddw Vx,Hx,Wx (66),(v1)
+02: phaddd Pq,Qq | vphaddd Vx,Hx,Wx (66),(v1)
+03: phaddsw Pq,Qq | vphaddsw Vx,Hx,Wx (66),(v1)
+04: pmaddubsw Pq,Qq | vpmaddubsw Vx,Hx,Wx (66),(v1)
+05: phsubw Pq,Qq | vphsubw Vx,Hx,Wx (66),(v1)
+06: phsubd Pq,Qq | vphsubd Vx,Hx,Wx (66),(v1)
+07: phsubsw Pq,Qq | vphsubsw Vx,Hx,Wx (66),(v1)
+08: psignb Pq,Qq | vpsignb Vx,Hx,Wx (66),(v1)
+09: psignw Pq,Qq | vpsignw Vx,Hx,Wx (66),(v1)
+0a: psignd Pq,Qq | vpsignd Vx,Hx,Wx (66),(v1)
+0b: pmulhrsw Pq,Qq | vpmulhrsw Vx,Hx,Wx (66),(v1)
+0c: vpermilps Vx,Hx,Wx (66),(v)
+0d: vpermilpd Vx,Hx,Wx (66),(v)
+0e: vtestps Vx,Wx (66),(v)
+0f: vtestpd Vx,Wx (66),(v)
 # 0x0f 0x38 0x10-0x1f
 10: pblendvb Vdq,Wdq (66)
 11:
 12:
-13:
+13: vcvtph2ps Vx,Wx,Ib (66),(v)
 14: blendvps Vdq,Wdq (66)
 15: blendvpd Vdq,Wdq (66)
-16:
-17: ptest Vdq,Wdq (66),(VEX)
-18: vbroadcastss /r (66),(oVEX)
-19: vbroadcastsd /r (66),(oVEX),(o256)
-1a: vbroadcastf128 /r (66),(oVEX),(o256)
+16: vpermps Vqq,Hqq,Wqq (66),(v)
+17: vptest Vx,Wx (66)
+18: vbroadcastss Vx,Wd (66),(v)
+19: vbroadcastsd Vqq,Wq (66),(v)
+1a: vbroadcastf128 Vqq,Mdq (66),(v)
 1b:
-1c: pabsb Pq,Qq | pabsb Vdq,Wdq (66),(VEX),(o128)
-1d: pabsw Pq,Qq | pabsw Vdq,Wdq (66),(VEX),(o128)
-1e: pabsd Pq,Qq | pabsd Vdq,Wdq (66),(VEX),(o128)
+1c: pabsb Pq,Qq | vpabsb Vx,Wx (66),(v1)
+1d: pabsw Pq,Qq | vpabsw Vx,Wx (66),(v1)
+1e: pabsd Pq,Qq | vpabsd Vx,Wx (66),(v1)
 1f:
 # 0x0f 0x38 0x20-0x2f
-20: pmovsxbw Vdq,Udq/Mq (66),(VEX),(o128)
-21: pmovsxbd Vdq,Udq/Md (66),(VEX),(o128)
-22: pmovsxbq Vdq,Udq/Mw (66),(VEX),(o128)
-23: pmovsxwd Vdq,Udq/Mq (66),(VEX),(o128)
-24: pmovsxwq Vdq,Udq/Md (66),(VEX),(o128)
-25: pmovsxdq Vdq,Udq/Mq (66),(VEX),(o128)
+20: vpmovsxbw Vx,Ux/Mq (66),(v1)
+21: vpmovsxbd Vx,Ux/Md (66),(v1)
+22: vpmovsxbq Vx,Ux/Mw (66),(v1)
+23: vpmovsxwd Vx,Ux/Mq (66),(v1)
+24: vpmovsxwq Vx,Ux/Md (66),(v1)
+25: vpmovsxdq Vx,Ux/Mq (66),(v1)
 26:
 27:
-28: pmuldq Vdq,Wdq (66),(VEX),(o128)
-29: pcmpeqq Vdq,Wdq (66),(VEX),(o128)
-2a: movntdqa Vdq,Mdq (66),(VEX),(o128)
-2b: packusdw Vdq,Wdq (66),(VEX),(o128)
-2c: vmaskmovps(ld) /r (66),(oVEX)
-2d: vmaskmovpd(ld) /r (66),(oVEX)
-2e: vmaskmovps(st) /r (66),(oVEX)
-2f: vmaskmovpd(st) /r (66),(oVEX)
+28: vpmuldq Vx,Hx,Wx (66),(v1)
+29: vpcmpeqq Vx,Hx,Wx (66),(v1)
+2a: vmovntdqa Vx,Mx (66),(v1)
+2b: vpackusdw Vx,Hx,Wx (66),(v1)
+2c: vmaskmovps Vx,Hx,Mx (66),(v)
+2d: vmaskmovpd Vx,Hx,Mx (66),(v)
+2e: vmaskmovps Mx,Hx,Vx (66),(v)
+2f: vmaskmovpd Mx,Hx,Vx (66),(v)
 # 0x0f 0x38 0x30-0x3f
-30: pmovzxbw Vdq,Udq/Mq (66),(VEX),(o128)
-31: pmovzxbd Vdq,Udq/Md (66),(VEX),(o128)
-32: pmovzxbq Vdq,Udq/Mw (66),(VEX),(o128)
-33: pmovzxwd Vdq,Udq/Mq (66),(VEX),(o128)
-34: pmovzxwq Vdq,Udq/Md (66),(VEX),(o128)
-35: pmovzxdq Vdq,Udq/Mq (66),(VEX),(o128)
-36:
-37: pcmpgtq Vdq,Wdq (66),(VEX),(o128)
-38: pminsb Vdq,Wdq (66),(VEX),(o128)
-39: pminsd Vdq,Wdq (66),(VEX),(o128)
-3a: pminuw Vdq,Wdq (66),(VEX),(o128)
-3b: pminud Vdq,Wdq (66),(VEX),(o128)
-3c: pmaxsb Vdq,Wdq (66),(VEX),(o128)
-3d: pmaxsd Vdq,Wdq (66),(VEX),(o128)
-3e: pmaxuw Vdq,Wdq (66),(VEX),(o128)
-3f: pmaxud Vdq,Wdq (66),(VEX),(o128)
+30: vpmovzxbw Vx,Ux/Mq (66),(v1)
+31: vpmovzxbd Vx,Ux/Md (66),(v1)
+32: vpmovzxbq Vx,Ux/Mw (66),(v1)
+33: vpmovzxwd Vx,Ux/Mq (66),(v1)
+34: vpmovzxwq Vx,Ux/Md (66),(v1)
+35: vpmovzxdq Vx,Ux/Mq (66),(v1)
+36: vpermd Vqq,Hqq,Wqq (66),(v)
+37: vpcmpgtq Vx,Hx,Wx (66),(v1)
+38: vpminsb Vx,Hx,Wx (66),(v1)
+39: vpminsd Vx,Hx,Wx (66),(v1)
+3a: vpminuw Vx,Hx,Wx (66),(v1)
+3b: vpminud Vx,Hx,Wx (66),(v1)
+3c: vpmaxsb Vx,Hx,Wx (66),(v1)
+3d: vpmaxsd Vx,Hx,Wx (66),(v1)
+3e: vpmaxuw Vx,Hx,Wx (66),(v1)
+3f: vpmaxud Vx,Hx,Wx (66),(v1)
 # 0x0f 0x38 0x40-0x8f
-40: pmulld Vdq,Wdq (66),(VEX),(o128)
-41: phminposuw Vdq,Wdq (66),(VEX),(o128)
-80: INVEPT Gd/q,Mdq (66)
-81: INVPID Gd/q,Mdq (66)
+40: vpmulld Vx,Hx,Wx (66),(v1)
+41: vphminposuw Vdq,Wdq (66),(v1)
+42:
+43:
+44:
+45: vpsrlvd/q Vx,Hx,Wx (66),(v)
+46: vpsravd Vx,Hx,Wx (66),(v)
+47: vpsllvd/q Vx,Hx,Wx (66),(v)
+# Skip 0x48-0x57
+58: vpbroadcastd Vx,Wx (66),(v)
+59: vpbroadcastq Vx,Wx (66),(v)
+5a: vbroadcasti128 Vqq,Mdq (66),(v)
+# Skip 0x5b-0x77
+78: vpbroadcastb Vx,Wx (66),(v)
+79: vpbroadcastw Vx,Wx (66),(v)
+# Skip 0x7a-0x7f
+80: INVEPT Gy,Mdq (66)
+81: INVPID Gy,Mdq (66)
+82: INVPCID Gy,Mdq (66)
+8c: vpmaskmovd/q Vx,Hx,Mx (66),(v)
+8e: vpmaskmovd/q Mx,Vx,Hx (66),(v)
 # 0x0f 0x38 0x90-0xbf (FMA)
-96: vfmaddsub132pd/ps /r (66),(VEX)
-97: vfmsubadd132pd/ps /r (66),(VEX)
-98: vfmadd132pd/ps /r (66),(VEX)
-99: vfmadd132sd/ss /r (66),(VEX),(o128)
-9a: vfmsub132pd/ps /r (66),(VEX)
-9b: vfmsub132sd/ss /r (66),(VEX),(o128)
-9c: vfnmadd132pd/ps /r (66),(VEX)
-9d: vfnmadd132sd/ss /r (66),(VEX),(o128)
-9e: vfnmsub132pd/ps /r (66),(VEX)
-9f: vfnmsub132sd/ss /r (66),(VEX),(o128)
-a6: vfmaddsub213pd/ps /r (66),(VEX)
-a7: vfmsubadd213pd/ps /r (66),(VEX)
-a8: vfmadd213pd/ps /r (66),(VEX)
-a9: vfmadd213sd/ss /r (66),(VEX),(o128)
-aa: vfmsub213pd/ps /r (66),(VEX)
-ab: vfmsub213sd/ss /r (66),(VEX),(o128)
-ac: vfnmadd213pd/ps /r (66),(VEX)
-ad: vfnmadd213sd/ss /r (66),(VEX),(o128)
-ae: vfnmsub213pd/ps /r (66),(VEX)
-af: vfnmsub213sd/ss /r (66),(VEX),(o128)
-b6: vfmaddsub231pd/ps /r (66),(VEX)
-b7: vfmsubadd231pd/ps /r (66),(VEX)
-b8: vfmadd231pd/ps /r (66),(VEX)
-b9: vfmadd231sd/ss /r (66),(VEX),(o128)
-ba: vfmsub231pd/ps /r (66),(VEX)
-bb: vfmsub231sd/ss /r (66),(VEX),(o128)
-bc: vfnmadd231pd/ps /r (66),(VEX)
-bd: vfnmadd231sd/ss /r (66),(VEX),(o128)
-be: vfnmsub231pd/ps /r (66),(VEX)
-bf: vfnmsub231sd/ss /r (66),(VEX),(o128)
+90: vgatherdd/q Vx,Hx,Wx (66),(v)
+91: vgatherqd/q Vx,Hx,Wx (66),(v)
+92: vgatherdps/d Vx,Hx,Wx (66),(v)
+93: vgatherqps/d Vx,Hx,Wx (66),(v)
+94:
+95:
+96: vfmaddsub132ps/d Vx,Hx,Wx (66),(v)
+97: vfmsubadd132ps/d Vx,Hx,Wx (66),(v)
+98: vfmadd132ps/d Vx,Hx,Wx (66),(v)
+99: vfmadd132ss/d Vx,Hx,Wx (66),(v),(v1)
+9a: vfmsub132ps/d Vx,Hx,Wx (66),(v)
+9b: vfmsub132ss/d Vx,Hx,Wx (66),(v),(v1)
+9c: vfnmadd132ps/d Vx,Hx,Wx (66),(v)
+9d: vfnmadd132ss/d Vx,Hx,Wx (66),(v),(v1)
+9e: vfnmsub132ps/d Vx,Hx,Wx (66),(v)
+9f: vfnmsub132ss/d Vx,Hx,Wx (66),(v),(v1)
+a6: vfmaddsub213ps/d Vx,Hx,Wx (66),(v)
+a7: vfmsubadd213ps/d Vx,Hx,Wx (66),(v)
+a8: vfmadd213ps/d Vx,Hx,Wx (66),(v)
+a9: vfmadd213ss/d Vx,Hx,Wx (66),(v),(v1)
+aa: vfmsub213ps/d Vx,Hx,Wx (66),(v)
+ab: vfmsub213ss/d Vx,Hx,Wx (66),(v),(v1)
+ac: vfnmadd213ps/d Vx,Hx,Wx (66),(v)
+ad: vfnmadd213ss/d Vx,Hx,Wx (66),(v),(v1)
+ae: vfnmsub213ps/d Vx,Hx,Wx (66),(v)
+af: vfnmsub213ss/d Vx,Hx,Wx (66),(v),(v1)
+b6: vfmaddsub231ps/d Vx,Hx,Wx (66),(v)
+b7: vfmsubadd231ps/d Vx,Hx,Wx (66),(v)
+b8: vfmadd231ps/d Vx,Hx,Wx (66),(v)
+b9: vfmadd231ss/d Vx,Hx,Wx (66),(v),(v1)
+ba: vfmsub231ps/d Vx,Hx,Wx (66),(v)
+bb: vfmsub231ss/d Vx,Hx,Wx (66),(v),(v1)
+bc: vfnmadd231ps/d Vx,Hx,Wx (66),(v)
+bd: vfnmadd231ss/d Vx,Hx,Wx (66),(v),(v1)
+be: vfnmsub231ps/d Vx,Hx,Wx (66),(v)
+bf: vfnmsub231ss/d Vx,Hx,Wx (66),(v),(v1)
 # 0x0f 0x38 0xc0-0xff
-db: aesimc Vdq,Wdq (66),(VEX),(o128)
-dc: aesenc Vdq,Wdq (66),(VEX),(o128)
-dd: aesenclast Vdq,Wdq (66),(VEX),(o128)
-de: aesdec Vdq,Wdq (66),(VEX),(o128)
-df: aesdeclast Vdq,Wdq (66),(VEX),(o128)
-f0: MOVBE Gv,Mv | CRC32 Gd,Eb (F2)
-f1: MOVBE Mv,Gv | CRC32 Gd,Ev (F2)
+db: VAESIMC Vdq,Wdq (66),(v1)
+dc: VAESENC Vdq,Hdq,Wdq (66),(v1)
+dd: VAESENCLAST Vdq,Hdq,Wdq (66),(v1)
+de: VAESDEC Vdq,Hdq,Wdq (66),(v1)
+df: VAESDECLAST Vdq,Hdq,Wdq (66),(v1)
+f0: MOVBE Gy,My | MOVBE Gw,Mw (66) | CRC32 Gd,Eb (F2)
+f1: MOVBE My,Gy | MOVBE Mw,Gw (66) | CRC32 Gd,Ey (F2)
+f3: ANDN Gy,By,Ey (v)
+f4: Grp17 (1A)
+f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v)
+f6: MULX By,Gy,rDX,Ey (F2),(v)
+f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v)
 EndTable
 
 Table: 3-byte opcode 2 (0x0f 0x3a)
 Referrer: 3-byte escape 2
 AVXcode: 3
 # 0x0f 0x3a 0x00-0xff
-04: vpermilps /r,Ib (66),(oVEX)
-05: vpermilpd /r,Ib (66),(oVEX)
-06: vperm2f128 /r,Ib (66),(oVEX),(o256)
-08: roundps Vdq,Wdq,Ib (66),(VEX)
-09: roundpd Vdq,Wdq,Ib (66),(VEX)
-0a: roundss Vss,Wss,Ib (66),(VEX),(o128)
-0b: roundsd Vsd,Wsd,Ib (66),(VEX),(o128)
-0c: blendps Vdq,Wdq,Ib (66),(VEX)
-0d: blendpd Vdq,Wdq,Ib (66),(VEX)
-0e: pblendw Vdq,Wdq,Ib (66),(VEX),(o128)
-0f: palignr Pq,Qq,Ib | palignr Vdq,Wdq,Ib (66),(VEX),(o128)
-14: pextrb Rd/Mb,Vdq,Ib (66),(VEX),(o128)
-15: pextrw Rd/Mw,Vdq,Ib (66),(VEX),(o128)
-16: pextrd/pextrq Ed/q,Vdq,Ib (66),(VEX),(o128)
-17: extractps Ed,Vdq,Ib (66),(VEX),(o128)
-18: vinsertf128 /r,Ib (66),(oVEX),(o256)
-19: vextractf128 /r,Ib (66),(oVEX),(o256)
-20: pinsrb Vdq,Rd/q/Mb,Ib (66),(VEX),(o128)
-21: insertps Vdq,Udq/Md,Ib (66),(VEX),(o128)
-22: pinsrd/pinsrq Vdq,Ed/q,Ib (66),(VEX),(o128)
-40: dpps Vdq,Wdq,Ib (66),(VEX)
-41: dppd Vdq,Wdq,Ib (66),(VEX),(o128)
-42: mpsadbw Vdq,Wdq,Ib (66),(VEX),(o128)
-44: pclmulq Vdq,Wdq,Ib (66),(VEX),(o128)
-4a: vblendvps /r,Ib (66),(oVEX)
-4b: vblendvpd /r,Ib (66),(oVEX)
-4c: vpblendvb /r,Ib (66),(oVEX),(o128)
-60: pcmpestrm Vdq,Wdq,Ib (66),(VEX),(o128)
-61: pcmpestri Vdq,Wdq,Ib (66),(VEX),(o128)
-62: pcmpistrm Vdq,Wdq,Ib (66),(VEX),(o128)
-63: pcmpistri Vdq,Wdq,Ib (66),(VEX),(o128)
-df: aeskeygenassist Vdq,Wdq,Ib (66),(VEX),(o128)
+00: vpermq Vqq,Wqq,Ib (66),(v)
+01: vpermpd Vqq,Wqq,Ib (66),(v)
+02: vpblendd Vx,Hx,Wx,Ib (66),(v)
+03:
+04: vpermilps Vx,Wx,Ib (66),(v)
+05: vpermilpd Vx,Wx,Ib (66),(v)
+06: vperm2f128 Vqq,Hqq,Wqq,Ib (66),(v)
+07:
+08: vroundps Vx,Wx,Ib (66)
+09: vroundpd Vx,Wx,Ib (66)
+0a: vroundss Vss,Wss,Ib (66),(v1)
+0b: vroundsd Vsd,Wsd,Ib (66),(v1)
+0c: vblendps Vx,Hx,Wx,Ib (66)
+0d: vblendpd Vx,Hx,Wx,Ib (66)
+0e: vpblendw Vx,Hx,Wx,Ib (66),(v1)
+0f: palignr Pq,Qq,Ib | vpalignr Vx,Hx,Wx,Ib (66),(v1)
+14: vpextrb Rd/Mb,Vdq,Ib (66),(v1)
+15: vpextrw Rd/Mw,Vdq,Ib (66),(v1)
+16: vpextrd/q Ey,Vdq,Ib (66),(v1)
+17: vextractps Ed,Vdq,Ib (66),(v1)
+18: vinsertf128 Vqq,Hqq,Wqq,Ib (66),(v)
+19: vextractf128 Wdq,Vqq,Ib (66),(v)
+1d: vcvtps2ph Wx,Vx,Ib (66),(v)
+20: vpinsrb Vdq,Hdq,Ry/Mb,Ib (66),(v1)
+21: vinsertps Vdq,Hdq,Udq/Md,Ib (66),(v1)
+22: vpinsrd/q Vdq,Hdq,Ey,Ib (66),(v1)
+38: vinserti128 Vqq,Hqq,Wqq,Ib (66),(v)
+39: vextracti128 Wdq,Vqq,Ib (66),(v)
+40: vdpps Vx,Hx,Wx,Ib (66)
+41: vdppd Vdq,Hdq,Wdq,Ib (66),(v1)
+42: vmpsadbw Vx,Hx,Wx,Ib (66),(v1)
+44: vpclmulqdq Vdq,Hdq,Wdq,Ib (66),(v1)
+46: vperm2i128 Vqq,Hqq,Wqq,Ib (66),(v)
+4a: vblendvps Vx,Hx,Wx,Lx (66),(v)
+4b: vblendvpd Vx,Hx,Wx,Lx (66),(v)
+4c: vpblendvb Vx,Hx,Wx,Lx (66),(v1)
+60: vpcmpestrm Vdq,Wdq,Ib (66),(v1)
+61: vpcmpestri Vdq,Wdq,Ib (66),(v1)
+62: vpcmpistrm Vdq,Wdq,Ib (66),(v1)
+63: vpcmpistri Vdq,Wdq,Ib (66),(v1)
+df: VAESKEYGEN Vdq,Wdq,Ib (66),(v1)
+f0: RORX Gy,Ey,Ib (F2),(v)
 EndTable
 
 GrpTable: Grp1
@@ -790,7 +843,7 @@ GrpTable: Grp5
 2: CALLN Ev (f64)
 3: CALLF Ep
 4: JMPN Ev (f64)
-5: JMPF Ep
+5: JMPF Mp
 6: PUSH Ev (d64)
 7:
 EndTable
@@ -807,7 +860,7 @@ EndTable
 GrpTable: Grp7
 0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B)
 1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001)
-2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B)
+2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B)
 3: LIDT Ms
 4: SMSW Mw/Rv
 5:
@@ -824,44 +877,45 @@ EndTable
 
 GrpTable: Grp9
 1: CMPXCHG8B/16B Mq/Mdq
-6: VMPTRLD Mq | VMCLEAR Mq (66) | VMXON Mq (F3)
-7: VMPTRST Mq
+6: VMPTRLD Mq | VMCLEAR Mq (66) | VMXON Mq (F3) | RDRAND Rv (11B)
+7: VMPTRST Mq | VMPTRST Mq (F3)
 EndTable
 
 GrpTable: Grp10
 EndTable
 
 GrpTable: Grp11
+# Note: the operands are given by group opcode
 0: MOV
 EndTable
 
 GrpTable: Grp12
-2: psrlw Nq,Ib (11B) | psrlw Udq,Ib (66),(11B),(VEX),(o128)
-4: psraw Nq,Ib (11B) | psraw Udq,Ib (66),(11B),(VEX),(o128)
-6: psllw Nq,Ib (11B) | psllw Udq,Ib (66),(11B),(VEX),(o128)
+2: psrlw Nq,Ib (11B) | vpsrlw Hx,Ux,Ib (66),(11B),(v1)
+4: psraw Nq,Ib (11B) | vpsraw Hx,Ux,Ib (66),(11B),(v1)
+6: psllw Nq,Ib (11B) | vpsllw Hx,Ux,Ib (66),(11B),(v1)
 EndTable
 
 GrpTable: Grp13
-2: psrld Nq,Ib (11B) | psrld Udq,Ib (66),(11B),(VEX),(o128)
-4: psrad Nq,Ib (11B) | psrad Udq,Ib (66),(11B),(VEX),(o128)
-6: pslld Nq,Ib (11B) | pslld Udq,Ib (66),(11B),(VEX),(o128)
+2: psrld Nq,Ib (11B) | vpsrld Hx,Ux,Ib (66),(11B),(v1)
+4: psrad Nq,Ib (11B) | vpsrad Hx,Ux,Ib (66),(11B),(v1)
+6: pslld Nq,Ib (11B) | vpslld Hx,Ux,Ib (66),(11B),(v1)
 EndTable
 
 GrpTable: Grp14
-2: psrlq Nq,Ib (11B) | psrlq Udq,Ib (66),(11B),(VEX),(o128)
-3: psrldq Udq,Ib (66),(11B),(VEX),(o128)
-6: psllq Nq,Ib (11B) | psllq Udq,Ib (66),(11B),(VEX),(o128)
-7: pslldq Udq,Ib (66),(11B),(VEX),(o128)
+2: psrlq Nq,Ib (11B) | vpsrlq Hx,Ux,Ib (66),(11B),(v1)
+3: vpsrldq Hx,Ux,Ib (66),(11B),(v1)
+6: psllq Nq,Ib (11B) | vpsllq Hx,Ux,Ib (66),(11B),(v1)
+7: vpslldq Hx,Ux,Ib (66),(11B),(v1)
 EndTable
 
 GrpTable: Grp15
-0: fxsave
-1: fxstor
-2: ldmxcsr (VEX)
-3: stmxcsr (VEX)
+0: fxsave | RDFSBASE Ry (F3),(11B)
+1: fxstor | RDGSBASE Ry (F3),(11B)
+2: vldmxcsr Md (v1) | WRFSBASE Ry (F3),(11B)
+3: vstmxcsr Md (v1) | WRGSBASE Ry (F3),(11B)
 4: XSAVE
 5: XRSTOR | lfence (11B)
-6: mfence (11B)
+6: XSAVEOPT | mfence (11B)
 7: clflush | sfence (11B)
 EndTable
 
@@ -872,6 +926,12 @@ GrpTable: Grp16
 3: prefetch T2
 EndTable
 
+GrpTable: Grp17
+1: BLSR By,Ey (v)
+2: BLSMSK By,Ey (v)
+3: BLSI By,Ey (v)
+EndTable
+
 # AMD's Prefetch Group
 GrpTable: GrpP
 0: PREFETCH
diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
index 3d11327..23d8e5f 100644
--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -27,6 +27,4 @@ obj-$(CONFIG_AMD_NUMA)		+= amdtopology.o
 obj-$(CONFIG_ACPI_NUMA)		+= srat.o
 obj-$(CONFIG_NUMA_EMU)		+= numa_emulation.o
 
-obj-$(CONFIG_HAVE_MEMBLOCK)		+= memblock.o
-
 obj-$(CONFIG_MEMTEST)		+= memtest.o
diff --git a/arch/x86/mm/extable.c b/arch/x86/mm/extable.c
index d0474ad..1fb85db 100644
--- a/arch/x86/mm/extable.c
+++ b/arch/x86/mm/extable.c
@@ -25,7 +25,7 @@ int fixup_exception(struct pt_regs *regs)
 	if (fixup) {
 		/* If fixup is less than 16, it means uaccess error */
 		if (fixup->fixup < 16) {
-			current_thread_info()->uaccess_err = -EFAULT;
+			current_thread_info()->uaccess_err = 1;
 			regs->ip += fixup->fixup;
 			return 1;
 		}
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 5db0490..9d74824 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -626,7 +626,7 @@ pgtable_bad(struct pt_regs *regs, unsigned long error_code,
 
 static noinline void
 no_context(struct pt_regs *regs, unsigned long error_code,
-	   unsigned long address)
+	   unsigned long address, int signal, int si_code)
 {
 	struct task_struct *tsk = current;
 	unsigned long *stackend;
@@ -634,8 +634,17 @@ no_context(struct pt_regs *regs, unsigned long error_code,
 	int sig;
 
 	/* Are we prepared to handle this kernel fault? */
-	if (fixup_exception(regs))
+	if (fixup_exception(regs)) {
+		if (current_thread_info()->sig_on_uaccess_error && signal) {
+			tsk->thread.trap_no = 14;
+			tsk->thread.error_code = error_code | PF_USER;
+			tsk->thread.cr2 = address;
+
+			/* XXX: hwpoison faults will set the wrong code. */
+			force_sig_info_fault(signal, si_code, address, tsk, 0);
+		}
 		return;
+	}
 
 	/*
 	 * 32-bit:
@@ -755,7 +764,7 @@ __bad_area_nosemaphore(struct pt_regs *regs, unsigned long error_code,
 	if (is_f00f_bug(regs, address))
 		return;
 
-	no_context(regs, error_code, address);
+	no_context(regs, error_code, address, SIGSEGV, si_code);
 }
 
 static noinline void
@@ -819,7 +828,7 @@ do_sigbus(struct pt_regs *regs, unsigned long error_code, unsigned long address,
 
 	/* Kernel mode? Handle exceptions or die: */
 	if (!(error_code & PF_USER)) {
-		no_context(regs, error_code, address);
+		no_context(regs, error_code, address, SIGBUS, BUS_ADRERR);
 		return;
 	}
 
@@ -854,7 +863,7 @@ mm_fault_error(struct pt_regs *regs, unsigned long error_code,
 		if (!(fault & VM_FAULT_RETRY))
 			up_read(&current->mm->mmap_sem);
 		if (!(error_code & PF_USER))
-			no_context(regs, error_code, address);
+			no_context(regs, error_code, address, 0, 0);
 		return 1;
 	}
 	if (!(fault & VM_FAULT_ERROR))
@@ -864,7 +873,8 @@ mm_fault_error(struct pt_regs *regs, unsigned long error_code,
 		/* Kernel mode? Handle exceptions or die: */
 		if (!(error_code & PF_USER)) {
 			up_read(&current->mm->mmap_sem);
-			no_context(regs, error_code, address);
+			no_context(regs, error_code, address,
+				   SIGSEGV, SEGV_MAPERR);
 			return 1;
 		}
 
diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c
index ea30585..dd74e46 100644
--- a/arch/x86/mm/gup.c
+++ b/arch/x86/mm/gup.c
@@ -201,6 +201,8 @@ static noinline int gup_huge_pud(pud_t pud, unsigned long addr,
 	do {
 		VM_BUG_ON(compound_head(page) != head);
 		pages[*nr] = page;
+		if (PageTail(page))
+			get_huge_page_tail(page);
 		(*nr)++;
 		page++;
 		refs++;
diff --git a/arch/x86/mm/highmem_32.c b/arch/x86/mm/highmem_32.c
index b499626..f4f29b1 100644
--- a/arch/x86/mm/highmem_32.c
+++ b/arch/x86/mm/highmem_32.c
@@ -45,6 +45,7 @@ void *kmap_atomic_prot(struct page *page, pgprot_t prot)
 	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
 	BUG_ON(!pte_none(*(kmap_pte-idx)));
 	set_pte(kmap_pte-idx, mk_pte(page, prot));
+	arch_flush_lazy_mmu_mode();
 
 	return (void *)vaddr;
 }
@@ -88,6 +89,7 @@ void __kunmap_atomic(void *kvaddr)
 		 */
 		kpte_clear_flush(kmap_pte-idx, vaddr);
 		kmap_atomic_idx_pop();
+		arch_flush_lazy_mmu_mode();
 	}
 #ifdef CONFIG_DEBUG_HIGHMEM
 	else {
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index 87488b9..a298914 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -67,7 +67,7 @@ static void __init find_early_table_space(unsigned long end, int use_pse,
 	good_end = max_pfn_mapped << PAGE_SHIFT;
 
 	base = memblock_find_in_range(start, good_end, tables, PAGE_SIZE);
-	if (base == MEMBLOCK_ERROR)
+	if (!base)
 		panic("Cannot find space for the kernel page tables");
 
 	pgt_buf_start = base >> PAGE_SHIFT;
@@ -80,7 +80,7 @@ static void __init find_early_table_space(unsigned long end, int use_pse,
 
 void __init native_pagetable_reserve(u64 start, u64 end)
 {
-	memblock_x86_reserve_range(start, end, "PGTABLE");
+	memblock_reserve(start, end - start);
 }
 
 struct map_range {
@@ -279,8 +279,8 @@ unsigned long __init_refok init_memory_mapping(unsigned long start,
 	 * pgt_buf_end) and free the other ones (pgt_buf_end - pgt_buf_top)
 	 * so that they can be reused for other purposes.
 	 *
-	 * On native it just means calling memblock_x86_reserve_range, on Xen it
-	 * also means marking RW the pagetable pages that we allocated before
+	 * On native it just means calling memblock_reserve, on Xen it also
+	 * means marking RW the pagetable pages that we allocated before
 	 * but that haven't been used.
 	 *
 	 * In fact on xen we mark RO the whole range pgt_buf_start -
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index 29f7c6d9..0c1da39 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -427,23 +427,17 @@ static void __init add_one_highpage_init(struct page *page)
 void __init add_highpages_with_active_regions(int nid,
 			 unsigned long start_pfn, unsigned long end_pfn)
 {
-	struct range *range;
-	int nr_range;
-	int i;
-
-	nr_range = __get_free_all_memory_range(&range, nid, start_pfn, end_pfn);
-
-	for (i = 0; i < nr_range; i++) {
-		struct page *page;
-		int node_pfn;
-
-		for (node_pfn = range[i].start; node_pfn < range[i].end;
-		     node_pfn++) {
-			if (!pfn_valid(node_pfn))
-				continue;
-			page = pfn_to_page(node_pfn);
-			add_one_highpage_init(page);
-		}
+	phys_addr_t start, end;
+	u64 i;
+
+	for_each_free_mem_range(i, nid, &start, &end, NULL) {
+		unsigned long pfn = clamp_t(unsigned long, PFN_UP(start),
+					    start_pfn, end_pfn);
+		unsigned long e_pfn = clamp_t(unsigned long, PFN_DOWN(end),
+					      start_pfn, end_pfn);
+		for ( ; pfn < e_pfn; pfn++)
+			if (pfn_valid(pfn))
+				add_one_highpage_init(pfn_to_page(pfn));
 	}
 }
 #else
@@ -650,18 +644,18 @@ void __init initmem_init(void)
 	highstart_pfn = highend_pfn = max_pfn;
 	if (max_pfn > max_low_pfn)
 		highstart_pfn = max_low_pfn;
-	memblock_x86_register_active_regions(0, 0, highend_pfn);
-	sparse_memory_present_with_active_regions(0);
 	printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
 		pages_to_mb(highend_pfn - highstart_pfn));
 	num_physpages = highend_pfn;
 	high_memory = (void *) __va(highstart_pfn * PAGE_SIZE - 1) + 1;
 #else
-	memblock_x86_register_active_regions(0, 0, max_low_pfn);
-	sparse_memory_present_with_active_regions(0);
 	num_physpages = max_low_pfn;
 	high_memory = (void *) __va(max_low_pfn * PAGE_SIZE - 1) + 1;
 #endif
+
+	memblock_set_node(0, (phys_addr_t)ULLONG_MAX, 0);
+	sparse_memory_present_with_active_regions(0);
+
 #ifdef CONFIG_FLATMEM
 	max_mapnr = num_physpages;
 #endif
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index bbaaa00..a8a56ce 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -608,7 +608,7 @@ kernel_physical_mapping_init(unsigned long start,
 #ifndef CONFIG_NUMA
 void __init initmem_init(void)
 {
-	memblock_x86_register_active_regions(0, 0, max_pfn);
+	memblock_set_node(0, (phys_addr_t)ULLONG_MAX, 0);
 }
 #endif
 
diff --git a/arch/x86/mm/memblock.c b/arch/x86/mm/memblock.c
deleted file mode 100644
index 992da5e..0000000
--- a/arch/x86/mm/memblock.c
+++ /dev/null
@@ -1,348 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-#include <linux/memblock.h>
-#include <linux/bootmem.h>
-#include <linux/mm.h>
-#include <linux/range.h>
-
-/* Check for already reserved areas */
-bool __init memblock_x86_check_reserved_size(u64 *addrp, u64 *sizep, u64 align)
-{
-	struct memblock_region *r;
-	u64 addr = *addrp, last;
-	u64 size = *sizep;
-	bool changed = false;
-
-again:
-	last = addr + size;
-	for_each_memblock(reserved, r) {
-		if (last > r->base && addr < r->base) {
-			size = r->base - addr;
-			changed = true;
-			goto again;
-		}
-		if (last > (r->base + r->size) && addr < (r->base + r->size)) {
-			addr = round_up(r->base + r->size, align);
-			size = last - addr;
-			changed = true;
-			goto again;
-		}
-		if (last <= (r->base + r->size) && addr >= r->base) {
-			*sizep = 0;
-			return false;
-		}
-	}
-	if (changed) {
-		*addrp = addr;
-		*sizep = size;
-	}
-	return changed;
-}
-
-/*
- * Find next free range after start, and size is returned in *sizep
- */
-u64 __init memblock_x86_find_in_range_size(u64 start, u64 *sizep, u64 align)
-{
-	struct memblock_region *r;
-
-	for_each_memblock(memory, r) {
-		u64 ei_start = r->base;
-		u64 ei_last = ei_start + r->size;
-		u64 addr;
-
-		addr = round_up(ei_start, align);
-		if (addr < start)
-			addr = round_up(start, align);
-		if (addr >= ei_last)
-			continue;
-		*sizep = ei_last - addr;
-		while (memblock_x86_check_reserved_size(&addr, sizep, align))
-			;
-
-		if (*sizep)
-			return addr;
-	}
-
-	return MEMBLOCK_ERROR;
-}
-
-static __init struct range *find_range_array(int count)
-{
-	u64 end, size, mem;
-	struct range *range;
-
-	size = sizeof(struct range) * count;
-	end = memblock.current_limit;
-
-	mem = memblock_find_in_range(0, end, size, sizeof(struct range));
-	if (mem == MEMBLOCK_ERROR)
-		panic("can not find more space for range array");
-
-	/*
-	 * This range is tempoaray, so don't reserve it, it will not be
-	 * overlapped because We will not alloccate new buffer before
-	 * We discard this one
-	 */
-	range = __va(mem);
-	memset(range, 0, size);
-
-	return range;
-}
-
-static void __init memblock_x86_subtract_reserved(struct range *range, int az)
-{
-	u64 final_start, final_end;
-	struct memblock_region *r;
-
-	/* Take out region array itself at first*/
-	memblock_free_reserved_regions();
-
-	memblock_dbg("Subtract (%ld early reservations)\n", memblock.reserved.cnt);
-
-	for_each_memblock(reserved, r) {
-		memblock_dbg("  [%010llx-%010llx]\n", (u64)r->base, (u64)r->base + r->size - 1);
-		final_start = PFN_DOWN(r->base);
-		final_end = PFN_UP(r->base + r->size);
-		if (final_start >= final_end)
-			continue;
-		subtract_range(range, az, final_start, final_end);
-	}
-
-	/* Put region array back ? */
-	memblock_reserve_reserved_regions();
-}
-
-struct count_data {
-	int nr;
-};
-
-static int __init count_work_fn(unsigned long start_pfn,
-				unsigned long end_pfn, void *datax)
-{
-	struct count_data *data = datax;
-
-	data->nr++;
-
-	return 0;
-}
-
-static int __init count_early_node_map(int nodeid)
-{
-	struct count_data data;
-
-	data.nr = 0;
-	work_with_active_regions(nodeid, count_work_fn, &data);
-
-	return data.nr;
-}
-
-int __init __get_free_all_memory_range(struct range **rangep, int nodeid,
-			 unsigned long start_pfn, unsigned long end_pfn)
-{
-	int count;
-	struct range *range;
-	int nr_range;
-
-	count = (memblock.reserved.cnt + count_early_node_map(nodeid)) * 2;
-
-	range = find_range_array(count);
-	nr_range = 0;
-
-	/*
-	 * Use early_node_map[] and memblock.reserved.region to get range array
-	 * at first
-	 */
-	nr_range = add_from_early_node_map(range, count, nr_range, nodeid);
-	subtract_range(range, count, 0, start_pfn);
-	subtract_range(range, count, end_pfn, -1ULL);
-
-	memblock_x86_subtract_reserved(range, count);
-	nr_range = clean_sort_range(range, count);
-
-	*rangep = range;
-	return nr_range;
-}
-
-int __init get_free_all_memory_range(struct range **rangep, int nodeid)
-{
-	unsigned long end_pfn = -1UL;
-
-#ifdef CONFIG_X86_32
-	end_pfn = max_low_pfn;
-#endif
-	return __get_free_all_memory_range(rangep, nodeid, 0, end_pfn);
-}
-
-static u64 __init __memblock_x86_memory_in_range(u64 addr, u64 limit, bool get_free)
-{
-	int i, count;
-	struct range *range;
-	int nr_range;
-	u64 final_start, final_end;
-	u64 free_size;
-	struct memblock_region *r;
-
-	count = (memblock.reserved.cnt + memblock.memory.cnt) * 2;
-
-	range = find_range_array(count);
-	nr_range = 0;
-
-	addr = PFN_UP(addr);
-	limit = PFN_DOWN(limit);
-
-	for_each_memblock(memory, r) {
-		final_start = PFN_UP(r->base);
-		final_end = PFN_DOWN(r->base + r->size);
-		if (final_start >= final_end)
-			continue;
-		if (final_start >= limit || final_end <= addr)
-			continue;
-
-		nr_range = add_range(range, count, nr_range, final_start, final_end);
-	}
-	subtract_range(range, count, 0, addr);
-	subtract_range(range, count, limit, -1ULL);
-
-	/* Subtract memblock.reserved.region in range ? */
-	if (!get_free)
-		goto sort_and_count_them;
-	for_each_memblock(reserved, r) {
-		final_start = PFN_DOWN(r->base);
-		final_end = PFN_UP(r->base + r->size);
-		if (final_start >= final_end)
-			continue;
-		if (final_start >= limit || final_end <= addr)
-			continue;
-
-		subtract_range(range, count, final_start, final_end);
-	}
-
-sort_and_count_them:
-	nr_range = clean_sort_range(range, count);
-
-	free_size = 0;
-	for (i = 0; i < nr_range; i++)
-		free_size += range[i].end - range[i].start;
-
-	return free_size << PAGE_SHIFT;
-}
-
-u64 __init memblock_x86_free_memory_in_range(u64 addr, u64 limit)
-{
-	return __memblock_x86_memory_in_range(addr, limit, true);
-}
-
-u64 __init memblock_x86_memory_in_range(u64 addr, u64 limit)
-{
-	return __memblock_x86_memory_in_range(addr, limit, false);
-}
-
-void __init memblock_x86_reserve_range(u64 start, u64 end, char *name)
-{
-	if (start == end)
-		return;
-
-	if (WARN_ONCE(start > end, "memblock_x86_reserve_range: wrong range [%#llx, %#llx)\n", start, end))
-		return;
-
-	memblock_dbg("    memblock_x86_reserve_range: [%#010llx-%#010llx] %16s\n", start, end - 1, name);
-
-	memblock_reserve(start, end - start);
-}
-
-void __init memblock_x86_free_range(u64 start, u64 end)
-{
-	if (start == end)
-		return;
-
-	if (WARN_ONCE(start > end, "memblock_x86_free_range: wrong range [%#llx, %#llx)\n", start, end))
-		return;
-
-	memblock_dbg("       memblock_x86_free_range: [%#010llx-%#010llx]\n", start, end - 1);
-
-	memblock_free(start, end - start);
-}
-
-/*
- * Need to call this function after memblock_x86_register_active_regions,
- * so early_node_map[] is filled already.
- */
-u64 __init memblock_x86_find_in_range_node(int nid, u64 start, u64 end, u64 size, u64 align)
-{
-	u64 addr;
-	addr = find_memory_core_early(nid, size, align, start, end);
-	if (addr != MEMBLOCK_ERROR)
-		return addr;
-
-	/* Fallback, should already have start end within node range */
-	return memblock_find_in_range(start, end, size, align);
-}
-
-/*
- * Finds an active region in the address range from start_pfn to last_pfn and
- * returns its range in ei_startpfn and ei_endpfn for the memblock entry.
- */
-static int __init memblock_x86_find_active_region(const struct memblock_region *ei,
-				  unsigned long start_pfn,
-				  unsigned long last_pfn,
-				  unsigned long *ei_startpfn,
-				  unsigned long *ei_endpfn)
-{
-	u64 align = PAGE_SIZE;
-
-	*ei_startpfn = round_up(ei->base, align) >> PAGE_SHIFT;
-	*ei_endpfn = round_down(ei->base + ei->size, align) >> PAGE_SHIFT;
-
-	/* Skip map entries smaller than a page */
-	if (*ei_startpfn >= *ei_endpfn)
-		return 0;
-
-	/* Skip if map is outside the node */
-	if (*ei_endpfn <= start_pfn || *ei_startpfn >= last_pfn)
-		return 0;
-
-	/* Check for overlaps */
-	if (*ei_startpfn < start_pfn)
-		*ei_startpfn = start_pfn;
-	if (*ei_endpfn > last_pfn)
-		*ei_endpfn = last_pfn;
-
-	return 1;
-}
-
-/* Walk the memblock.memory map and register active regions within a node */
-void __init memblock_x86_register_active_regions(int nid, unsigned long start_pfn,
-					 unsigned long last_pfn)
-{
-	unsigned long ei_startpfn;
-	unsigned long ei_endpfn;
-	struct memblock_region *r;
-
-	for_each_memblock(memory, r)
-		if (memblock_x86_find_active_region(r, start_pfn, last_pfn,
-					   &ei_startpfn, &ei_endpfn))
-			add_active_range(nid, ei_startpfn, ei_endpfn);
-}
-
-/*
- * Find the hole size (in bytes) in the memory range.
- * @start: starting address of the memory range to scan
- * @end: ending address of the memory range to scan
- */
-u64 __init memblock_x86_hole_size(u64 start, u64 end)
-{
-	unsigned long start_pfn = start >> PAGE_SHIFT;
-	unsigned long last_pfn = end >> PAGE_SHIFT;
-	unsigned long ei_startpfn, ei_endpfn, ram = 0;
-	struct memblock_region *r;
-
-	for_each_memblock(memory, r)
-		if (memblock_x86_find_active_region(r, start_pfn, last_pfn,
-					   &ei_startpfn, &ei_endpfn))
-			ram += ei_endpfn - ei_startpfn;
-
-	return end - start - ((u64)ram << PAGE_SHIFT);
-}
diff --git a/arch/x86/mm/memtest.c b/arch/x86/mm/memtest.c
index 92faf3a..c80b9fb 100644
--- a/arch/x86/mm/memtest.c
+++ b/arch/x86/mm/memtest.c
@@ -34,7 +34,7 @@ static void __init reserve_bad_mem(u64 pattern, u64 start_bad, u64 end_bad)
 	       (unsigned long long) pattern,
 	       (unsigned long long) start_bad,
 	       (unsigned long long) end_bad);
-	memblock_x86_reserve_range(start_bad, end_bad, "BAD RAM");
+	memblock_reserve(start_bad, end_bad - start_bad);
 }
 
 static void __init memtest(u64 pattern, u64 start_phys, u64 size)
@@ -70,24 +70,19 @@ static void __init memtest(u64 pattern, u64 start_phys, u64 size)
 
 static void __init do_one_pass(u64 pattern, u64 start, u64 end)
 {
-	u64 size = 0;
-
-	while (start < end) {
-		start = memblock_x86_find_in_range_size(start, &size, 1);
-
-		/* done ? */
-		if (start >= end)
-			break;
-		if (start + size > end)
-			size = end - start;
-
-		printk(KERN_INFO "  %010llx - %010llx pattern %016llx\n",
-		       (unsigned long long) start,
-		       (unsigned long long) start + size,
-		       (unsigned long long) cpu_to_be64(pattern));
-		memtest(pattern, start, size);
-
-		start += size;
+	u64 i;
+	phys_addr_t this_start, this_end;
+
+	for_each_free_mem_range(i, MAX_NUMNODES, &this_start, &this_end, NULL) {
+		this_start = clamp_t(phys_addr_t, this_start, start, end);
+		this_end = clamp_t(phys_addr_t, this_end, start, end);
+		if (this_start < this_end) {
+			printk(KERN_INFO "  %010llx - %010llx pattern %016llx\n",
+			       (unsigned long long)this_start,
+			       (unsigned long long)this_end,
+			       (unsigned long long)cpu_to_be64(pattern));
+			memtest(pattern, this_start, this_end - this_start);
+		}
 	}
 }
 
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index fbeaaf4..496f494 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -192,8 +192,6 @@ int __init numa_add_memblk(int nid, u64 start, u64 end)
 /* Initialize NODE_DATA for a node on the local memory */
 static void __init setup_node_data(int nid, u64 start, u64 end)
 {
-	const u64 nd_low = PFN_PHYS(MAX_DMA_PFN);
-	const u64 nd_high = PFN_PHYS(max_pfn_mapped);
 	const size_t nd_size = roundup(sizeof(pg_data_t), PAGE_SIZE);
 	bool remapped = false;
 	u64 nd_pa;
@@ -224,17 +222,12 @@ static void __init setup_node_data(int nid, u64 start, u64 end)
 		nd_pa = __pa(nd);
 		remapped = true;
 	} else {
-		nd_pa = memblock_x86_find_in_range_node(nid, nd_low, nd_high,
-						nd_size, SMP_CACHE_BYTES);
-		if (nd_pa == MEMBLOCK_ERROR)
-			nd_pa = memblock_find_in_range(nd_low, nd_high,
-						nd_size, SMP_CACHE_BYTES);
-		if (nd_pa == MEMBLOCK_ERROR) {
+		nd_pa = memblock_alloc_nid(nd_size, SMP_CACHE_BYTES, nid);
+		if (!nd_pa) {
 			pr_err("Cannot find %zu bytes in node %d\n",
 			       nd_size, nid);
 			return;
 		}
-		memblock_x86_reserve_range(nd_pa, nd_pa + nd_size, "NODE_DATA");
 		nd = __va(nd_pa);
 	}
 
@@ -371,8 +364,7 @@ void __init numa_reset_distance(void)
 
 	/* numa_distance could be 1LU marking allocation failure, test cnt */
 	if (numa_distance_cnt)
-		memblock_x86_free_range(__pa(numa_distance),
-					__pa(numa_distance) + size);
+		memblock_free(__pa(numa_distance), size);
 	numa_distance_cnt = 0;
 	numa_distance = NULL;	/* enable table creation */
 }
@@ -395,13 +387,13 @@ static int __init numa_alloc_distance(void)
 
 	phys = memblock_find_in_range(0, PFN_PHYS(max_pfn_mapped),
 				      size, PAGE_SIZE);
-	if (phys == MEMBLOCK_ERROR) {
+	if (!phys) {
 		pr_warning("NUMA: Warning: can't allocate distance table!\n");
 		/* don't retry until explicitly reset */
 		numa_distance = (void *)1LU;
 		return -ENOMEM;
 	}
-	memblock_x86_reserve_range(phys, phys + size, "NUMA DIST");
+	memblock_reserve(phys, size);
 
 	numa_distance = __va(phys);
 	numa_distance_cnt = cnt;
@@ -482,8 +474,8 @@ static bool __init numa_meminfo_cover_memory(const struct numa_meminfo *mi)
 			numaram = 0;
 	}
 
-	e820ram = max_pfn - (memblock_x86_hole_size(0,
-					PFN_PHYS(max_pfn)) >> PAGE_SHIFT);
+	e820ram = max_pfn - absent_pages_in_range(0, max_pfn);
+
 	/* We seem to lose 3 pages somewhere. Allow 1M of slack. */
 	if ((s64)(e820ram - numaram) >= (1 << (20 - PAGE_SHIFT))) {
 		printk(KERN_ERR "NUMA: nodes only cover %LuMB of your %LuMB e820 RAM. Not used.\n",
@@ -505,13 +497,10 @@ static int __init numa_register_memblks(struct numa_meminfo *mi)
 	if (WARN_ON(nodes_empty(node_possible_map)))
 		return -EINVAL;
 
-	for (i = 0; i < mi->nr_blks; i++)
-		memblock_x86_register_active_regions(mi->blk[i].nid,
-					mi->blk[i].start >> PAGE_SHIFT,
-					mi->blk[i].end >> PAGE_SHIFT);
-
-	/* for out of order entries */
-	sort_node_map();
+	for (i = 0; i < mi->nr_blks; i++) {
+		struct numa_memblk *mb = &mi->blk[i];
+		memblock_set_node(mb->start, mb->end - mb->start, mb->nid);
+	}
 
 	/*
 	 * If sections array is gonna be used for pfn -> nid mapping, check
@@ -545,6 +534,8 @@ static int __init numa_register_memblks(struct numa_meminfo *mi)
 			setup_node_data(nid, start, end);
 	}
 
+	/* Dump memblock with node info and return. */
+	memblock_dump_all();
 	return 0;
 }
 
@@ -582,7 +573,7 @@ static int __init numa_init(int (*init_func)(void))
 	nodes_clear(node_possible_map);
 	nodes_clear(node_online_map);
 	memset(&numa_meminfo, 0, sizeof(numa_meminfo));
-	remove_all_active_ranges();
+	WARN_ON(memblock_set_node(0, ULLONG_MAX, MAX_NUMNODES));
 	numa_reset_distance();
 
 	ret = init_func();
diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c
index 3adebe7..534255a 100644
--- a/arch/x86/mm/numa_32.c
+++ b/arch/x86/mm/numa_32.c
@@ -199,23 +199,23 @@ void __init init_alloc_remap(int nid, u64 start, u64 end)
 
 	/* allocate node memory and the lowmem remap area */
 	node_pa = memblock_find_in_range(start, end, size, LARGE_PAGE_BYTES);
-	if (node_pa == MEMBLOCK_ERROR) {
+	if (!node_pa) {
 		pr_warning("remap_alloc: failed to allocate %lu bytes for node %d\n",
 			   size, nid);
 		return;
 	}
-	memblock_x86_reserve_range(node_pa, node_pa + size, "KVA RAM");
+	memblock_reserve(node_pa, size);
 
 	remap_pa = memblock_find_in_range(min_low_pfn << PAGE_SHIFT,
 					  max_low_pfn << PAGE_SHIFT,
 					  size, LARGE_PAGE_BYTES);
-	if (remap_pa == MEMBLOCK_ERROR) {
+	if (!remap_pa) {
 		pr_warning("remap_alloc: failed to allocate %lu bytes remap area for node %d\n",
 			   size, nid);
-		memblock_x86_free_range(node_pa, node_pa + size);
+		memblock_free(node_pa, size);
 		return;
 	}
-	memblock_x86_reserve_range(remap_pa, remap_pa + size, "KVA PG");
+	memblock_reserve(remap_pa, size);
 	remap_va = phys_to_virt(remap_pa);
 
 	/* perform actual remap */
diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c
index dd27f40..92e2711 100644
--- a/arch/x86/mm/numa_64.c
+++ b/arch/x86/mm/numa_64.c
@@ -19,7 +19,7 @@ unsigned long __init numa_free_all_bootmem(void)
 	for_each_online_node(i)
 		pages += free_all_bootmem_node(NODE_DATA(i));
 
-	pages += free_all_memory_core_early(MAX_NUMNODES);
+	pages += free_low_memory_core_early(MAX_NUMNODES);
 
 	return pages;
 }
diff --git a/arch/x86/mm/numa_emulation.c b/arch/x86/mm/numa_emulation.c
index d0ed086..46db568 100644
--- a/arch/x86/mm/numa_emulation.c
+++ b/arch/x86/mm/numa_emulation.c
@@ -28,6 +28,16 @@ static int __init emu_find_memblk_by_nid(int nid, const struct numa_meminfo *mi)
 	return -ENOENT;
 }
 
+static u64 mem_hole_size(u64 start, u64 end)
+{
+	unsigned long start_pfn = PFN_UP(start);
+	unsigned long end_pfn = PFN_DOWN(end);
+
+	if (start_pfn < end_pfn)
+		return PFN_PHYS(absent_pages_in_range(start_pfn, end_pfn));
+	return 0;
+}
+
 /*
  * Sets up nid to range from @start to @end.  The return value is -errno if
  * something went wrong, 0 otherwise.
@@ -89,7 +99,7 @@ static int __init split_nodes_interleave(struct numa_meminfo *ei,
 	 * Calculate target node size.  x86_32 freaks on __udivdi3() so do
 	 * the division in ulong number of pages and convert back.
 	 */
-	size = max_addr - addr - memblock_x86_hole_size(addr, max_addr);
+	size = max_addr - addr - mem_hole_size(addr, max_addr);
 	size = PFN_PHYS((unsigned long)(size >> PAGE_SHIFT) / nr_nodes);
 
 	/*
@@ -135,8 +145,7 @@ static int __init split_nodes_interleave(struct numa_meminfo *ei,
 			 * Continue to add memory to this fake node if its
 			 * non-reserved memory is less than the per-node size.
 			 */
-			while (end - start -
-			       memblock_x86_hole_size(start, end) < size) {
+			while (end - start - mem_hole_size(start, end) < size) {
 				end += FAKE_NODE_MIN_SIZE;
 				if (end > limit) {
 					end = limit;
@@ -150,7 +159,7 @@ static int __init split_nodes_interleave(struct numa_meminfo *ei,
 			 * this one must extend to the boundary.
 			 */
 			if (end < dma32_end && dma32_end - end -
-			    memblock_x86_hole_size(end, dma32_end) < FAKE_NODE_MIN_SIZE)
+			    mem_hole_size(end, dma32_end) < FAKE_NODE_MIN_SIZE)
 				end = dma32_end;
 
 			/*
@@ -158,8 +167,7 @@ static int __init split_nodes_interleave(struct numa_meminfo *ei,
 			 * next node, this one must extend to the end of the
 			 * physical node.
 			 */
-			if (limit - end -
-			    memblock_x86_hole_size(end, limit) < size)
+			if (limit - end - mem_hole_size(end, limit) < size)
 				end = limit;
 
 			ret = emu_setup_memblk(ei, pi, nid++ % nr_nodes,
@@ -180,7 +188,7 @@ static u64 __init find_end_of_node(u64 start, u64 max_addr, u64 size)
 {
 	u64 end = start + size;
 
-	while (end - start - memblock_x86_hole_size(start, end) < size) {
+	while (end - start - mem_hole_size(start, end) < size) {
 		end += FAKE_NODE_MIN_SIZE;
 		if (end > max_addr) {
 			end = max_addr;
@@ -211,8 +219,7 @@ static int __init split_nodes_size_interleave(struct numa_meminfo *ei,
 	 * creates a uniform distribution of node sizes across the entire
 	 * machine (but not necessarily over physical nodes).
 	 */
-	min_size = (max_addr - addr - memblock_x86_hole_size(addr, max_addr)) /
-						MAX_NUMNODES;
+	min_size = (max_addr - addr - mem_hole_size(addr, max_addr)) / MAX_NUMNODES;
 	min_size = max(min_size, FAKE_NODE_MIN_SIZE);
 	if ((min_size & FAKE_NODE_MIN_HASH_MASK) < min_size)
 		min_size = (min_size + FAKE_NODE_MIN_SIZE) &
@@ -252,7 +259,7 @@ static int __init split_nodes_size_interleave(struct numa_meminfo *ei,
 			 * this one must extend to the boundary.
 			 */
 			if (end < dma32_end && dma32_end - end -
-			    memblock_x86_hole_size(end, dma32_end) < FAKE_NODE_MIN_SIZE)
+			    mem_hole_size(end, dma32_end) < FAKE_NODE_MIN_SIZE)
 				end = dma32_end;
 
 			/*
@@ -260,8 +267,7 @@ static int __init split_nodes_size_interleave(struct numa_meminfo *ei,
 			 * next node, this one must extend to the end of the
 			 * physical node.
 			 */
-			if (limit - end -
-			    memblock_x86_hole_size(end, limit) < size)
+			if (limit - end - mem_hole_size(end, limit) < size)
 				end = limit;
 
 			ret = emu_setup_memblk(ei, pi, nid++ % MAX_NUMNODES,
@@ -351,11 +357,11 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt)
 
 		phys = memblock_find_in_range(0, PFN_PHYS(max_pfn_mapped),
 					      phys_size, PAGE_SIZE);
-		if (phys == MEMBLOCK_ERROR) {
+		if (!phys) {
 			pr_warning("NUMA: Warning: can't allocate copy of distance table, disabling emulation\n");
 			goto no_emu;
 		}
-		memblock_x86_reserve_range(phys, phys + phys_size, "TMP NUMA DIST");
+		memblock_reserve(phys, phys_size);
 		phys_dist = __va(phys);
 
 		for (i = 0; i < numa_dist_cnt; i++)
@@ -424,7 +430,7 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt)
 
 	/* free the copied physical distance table */
 	if (phys_dist)
-		memblock_x86_free_range(__pa(phys_dist), __pa(phys_dist) + phys_size);
+		memblock_free(__pa(phys_dist), phys_size);
 	return;
 
 no_emu:
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index f9e5267..eda2acb 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -998,7 +998,7 @@ out_err:
 }
 EXPORT_SYMBOL(set_memory_uc);
 
-int _set_memory_array(unsigned long *addr, int addrinarray,
+static int _set_memory_array(unsigned long *addr, int addrinarray,
 		unsigned long new_type)
 {
 	int i, j;
diff --git a/arch/x86/mm/srat.c b/arch/x86/mm/srat.c
index 81dbfde..fd61b3f 100644
--- a/arch/x86/mm/srat.c
+++ b/arch/x86/mm/srat.c
@@ -69,6 +69,12 @@ acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa)
 	if ((pa->flags & ACPI_SRAT_CPU_ENABLED) == 0)
 		return;
 	pxm = pa->proximity_domain;
+	apic_id = pa->apic_id;
+	if (!cpu_has_x2apic && (apic_id >= 0xff)) {
+		printk(KERN_INFO "SRAT: PXM %u -> X2APIC 0x%04x ignored\n",
+			 pxm, apic_id);
+		return;
+	}
 	node = setup_node(pxm);
 	if (node < 0) {
 		printk(KERN_ERR "SRAT: Too many proximity domains %x\n", pxm);
@@ -76,7 +82,6 @@ acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa)
 		return;
 	}
 
-	apic_id = pa->apic_id;
 	if (apic_id >= MAX_LOCAL_APIC) {
 		printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%04x -> Node %u skipped apicid that is too big\n", pxm, apic_id, node);
 		return;
diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c
index bfab3fa..7b65f75 100644
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -568,8 +568,8 @@ cond_branch:			f_offset = addrs[i + filter[i].jf] - addrs[i];
 					break;
 				}
 				if (filter[i].jt != 0) {
-					if (filter[i].jf)
-						t_offset += is_near(f_offset) ? 2 : 6;
+					if (filter[i].jf && f_offset)
+						t_offset += is_near(f_offset) ? 2 : 5;
 					EMIT_COND_JMP(t_op, t_offset);
 					if (filter[i].jf)
 						EMIT_JMP(f_offset);
diff --git a/arch/x86/oprofile/Makefile b/arch/x86/oprofile/Makefile
index 446902b..1599f56 100644
--- a/arch/x86/oprofile/Makefile
+++ b/arch/x86/oprofile/Makefile
@@ -4,9 +4,8 @@ DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
 		oprof.o cpu_buffer.o buffer_sync.o \
 		event_buffer.o oprofile_files.o \
 		oprofilefs.o oprofile_stats.o  \
-		timer_int.o )
+		timer_int.o nmi_timer_int.o )
 
 oprofile-y				:= $(DRIVER_OBJS) init.o backtrace.o
 oprofile-$(CONFIG_X86_LOCAL_APIC) 	+= nmi_int.o op_model_amd.o \
 					   op_model_ppro.o op_model_p4.o
-oprofile-$(CONFIG_X86_IO_APIC)		+= nmi_timer_int.o
diff --git a/arch/x86/oprofile/init.c b/arch/x86/oprofile/init.c
index cdfe4c5..9e138d0 100644
--- a/arch/x86/oprofile/init.c
+++ b/arch/x86/oprofile/init.c
@@ -16,34 +16,23 @@
  * with the NMI mode driver.
  */
 
+#ifdef CONFIG_X86_LOCAL_APIC
 extern int op_nmi_init(struct oprofile_operations *ops);
-extern int op_nmi_timer_init(struct oprofile_operations *ops);
 extern void op_nmi_exit(void);
-extern void x86_backtrace(struct pt_regs * const regs, unsigned int depth);
+#else
+static int op_nmi_init(struct oprofile_operations *ops) { return -ENODEV; }
+static void op_nmi_exit(void) { }
+#endif
 
+extern void x86_backtrace(struct pt_regs * const regs, unsigned int depth);
 
 int __init oprofile_arch_init(struct oprofile_operations *ops)
 {
-	int ret;
-
-	ret = -ENODEV;
-
-#ifdef CONFIG_X86_LOCAL_APIC
-	ret = op_nmi_init(ops);
-#endif
-#ifdef CONFIG_X86_IO_APIC
-	if (ret < 0)
-		ret = op_nmi_timer_init(ops);
-#endif
 	ops->backtrace = x86_backtrace;
-
-	return ret;
+	return op_nmi_init(ops);
 }
 
-
 void oprofile_arch_exit(void)
 {
-#ifdef CONFIG_X86_LOCAL_APIC
 	op_nmi_exit();
-#endif
 }
diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 75f9528..26b8a85 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -595,24 +595,36 @@ static int __init p4_init(char **cpu_type)
 	return 0;
 }
 
-static int force_arch_perfmon;
-static int force_cpu_type(const char *str, struct kernel_param *kp)
+enum __force_cpu_type {
+	reserved = 0,		/* do not force */
+	timer,
+	arch_perfmon,
+};
+
+static int force_cpu_type;
+
+static int set_cpu_type(const char *str, struct kernel_param *kp)
 {
-	if (!strcmp(str, "arch_perfmon")) {
-		force_arch_perfmon = 1;
+	if (!strcmp(str, "timer")) {
+		force_cpu_type = timer;
+		printk(KERN_INFO "oprofile: forcing NMI timer mode\n");
+	} else if (!strcmp(str, "arch_perfmon")) {
+		force_cpu_type = arch_perfmon;
 		printk(KERN_INFO "oprofile: forcing architectural perfmon\n");
+	} else {
+		force_cpu_type = 0;
 	}
 
 	return 0;
 }
-module_param_call(cpu_type, force_cpu_type, NULL, NULL, 0);
+module_param_call(cpu_type, set_cpu_type, NULL, NULL, 0);
 
 static int __init ppro_init(char **cpu_type)
 {
 	__u8 cpu_model = boot_cpu_data.x86_model;
 	struct op_x86_model_spec *spec = &op_ppro_spec;	/* default */
 
-	if (force_arch_perfmon && cpu_has_arch_perfmon)
+	if (force_cpu_type == arch_perfmon && cpu_has_arch_perfmon)
 		return 0;
 
 	/*
@@ -679,6 +691,9 @@ int __init op_nmi_init(struct oprofile_operations *ops)
 	if (!cpu_has_apic)
 		return -ENODEV;
 
+	if (force_cpu_type == timer)
+		return -ENODEV;
+
 	switch (vendor) {
 	case X86_VENDOR_AMD:
 		/* Needs to be at least an Athlon (or hammer in 32bit mode) */
diff --git a/arch/x86/oprofile/nmi_timer_int.c b/arch/x86/oprofile/nmi_timer_int.c
deleted file mode 100644
index 7f8052c..0000000
--- a/arch/x86/oprofile/nmi_timer_int.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/**
- * @file nmi_timer_int.c
- *
- * @remark Copyright 2003 OProfile authors
- * @remark Read the file COPYING
- *
- * @author Zwane Mwaikambo <zwane@linuxpower.ca>
- */
-
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/errno.h>
-#include <linux/oprofile.h>
-#include <linux/rcupdate.h>
-#include <linux/kdebug.h>
-
-#include <asm/nmi.h>
-#include <asm/apic.h>
-#include <asm/ptrace.h>
-
-static int profile_timer_exceptions_notify(unsigned int val, struct pt_regs *regs)
-{
-	oprofile_add_sample(regs, 0);
-	return NMI_HANDLED;
-}
-
-static int timer_start(void)
-{
-	if (register_nmi_handler(NMI_LOCAL, profile_timer_exceptions_notify,
-					0, "oprofile-timer"))
-		return 1;
-	return 0;
-}
-
-
-static void timer_stop(void)
-{
-	unregister_nmi_handler(NMI_LOCAL, "oprofile-timer");
-	synchronize_sched();  /* Allow already-started NMIs to complete. */
-}
-
-
-int __init op_nmi_timer_init(struct oprofile_operations *ops)
-{
-	ops->start = timer_start;
-	ops->stop = timer_stop;
-	ops->cpu_type = "timer";
-	printk(KERN_INFO "oprofile: using NMI timer interrupt.\n");
-	return 0;
-}
diff --git a/arch/x86/pci/pcbios.c b/arch/x86/pci/pcbios.c
index db0e9a5..da8fe05 100644
--- a/arch/x86/pci/pcbios.c
+++ b/arch/x86/pci/pcbios.c
@@ -44,7 +44,7 @@ static inline void set_bios_x(void)
 	pcibios_enabled = 1;
 	set_memory_x(PAGE_OFFSET + BIOS_BEGIN, (BIOS_END - BIOS_BEGIN) >> PAGE_SHIFT);
 	if (__supported_pte_mask & _PAGE_NX)
-		printk(KERN_INFO "PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX.\n");
+		printk(KERN_INFO "PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.\n");
 }
 
 /*
diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c
index 37718f0..4cf9bd0 100644
--- a/arch/x86/platform/efi/efi.c
+++ b/arch/x86/platform/efi/efi.c
@@ -238,7 +238,8 @@ static efi_status_t __init phys_efi_get_time(efi_time_t *tm,
 
 	spin_lock_irqsave(&rtc_lock, flags);
 	efi_call_phys_prelog();
-	status = efi_call_phys2(efi_phys.get_time, tm, tc);
+	status = efi_call_phys2(efi_phys.get_time, virt_to_phys(tm),
+				virt_to_phys(tc));
 	efi_call_phys_epilog();
 	spin_unlock_irqrestore(&rtc_lock, flags);
 	return status;
@@ -352,8 +353,7 @@ void __init efi_memblock_x86_reserve_range(void)
 		boot_params.efi_info.efi_memdesc_size;
 	memmap.desc_version = boot_params.efi_info.efi_memdesc_version;
 	memmap.desc_size = boot_params.efi_info.efi_memdesc_size;
-	memblock_x86_reserve_range(pmap, pmap + memmap.nr_map * memmap.desc_size,
-		      "EFI memmap");
+	memblock_reserve(pmap, memmap.nr_map * memmap.desc_size);
 }
 
 #if EFI_DEBUG
@@ -397,16 +397,14 @@ void __init efi_reserve_boot_services(void)
 		if ((start+size >= virt_to_phys(_text)
 				&& start <= virt_to_phys(_end)) ||
 			!e820_all_mapped(start, start+size, E820_RAM) ||
-			memblock_x86_check_reserved_size(&start, &size,
-							1<<EFI_PAGE_SHIFT)) {
+			memblock_is_region_reserved(start, size)) {
 			/* Could not reserve, skip it */
 			md->num_pages = 0;
 			memblock_dbg(PFX "Could not reserve boot range "
 					"[0x%010llx-0x%010llx]\n",
 						start, start+size-1);
 		} else
-			memblock_x86_reserve_range(start, start+size,
-							"EFI Boot");
+			memblock_reserve(start, size);
 	}
 }
 
diff --git a/arch/x86/platform/efi/efi_32.c b/arch/x86/platform/efi/efi_32.c
index e36bf71..40e4469 100644
--- a/arch/x86/platform/efi/efi_32.c
+++ b/arch/x86/platform/efi/efi_32.c
@@ -39,43 +39,14 @@
  */
 
 static unsigned long efi_rt_eflags;
-static pgd_t efi_bak_pg_dir_pointer[2];
 
 void efi_call_phys_prelog(void)
 {
-	unsigned long cr4;
-	unsigned long temp;
 	struct desc_ptr gdt_descr;
 
 	local_irq_save(efi_rt_eflags);
 
-	/*
-	 * If I don't have PAE, I should just duplicate two entries in page
-	 * directory. If I have PAE, I just need to duplicate one entry in
-	 * page directory.
-	 */
-	cr4 = read_cr4_safe();
-
-	if (cr4 & X86_CR4_PAE) {
-		efi_bak_pg_dir_pointer[0].pgd =
-		    swapper_pg_dir[pgd_index(0)].pgd;
-		swapper_pg_dir[0].pgd =
-		    swapper_pg_dir[pgd_index(PAGE_OFFSET)].pgd;
-	} else {
-		efi_bak_pg_dir_pointer[0].pgd =
-		    swapper_pg_dir[pgd_index(0)].pgd;
-		efi_bak_pg_dir_pointer[1].pgd =
-		    swapper_pg_dir[pgd_index(0x400000)].pgd;
-		swapper_pg_dir[pgd_index(0)].pgd =
-		    swapper_pg_dir[pgd_index(PAGE_OFFSET)].pgd;
-		temp = PAGE_OFFSET + 0x400000;
-		swapper_pg_dir[pgd_index(0x400000)].pgd =
-		    swapper_pg_dir[pgd_index(temp)].pgd;
-	}
-
-	/*
-	 * After the lock is released, the original page table is restored.
-	 */
+	load_cr3(initial_page_table);
 	__flush_tlb_all();
 
 	gdt_descr.address = __pa(get_cpu_gdt_table(0));
@@ -85,28 +56,13 @@ void efi_call_phys_prelog(void)
 
 void efi_call_phys_epilog(void)
 {
-	unsigned long cr4;
 	struct desc_ptr gdt_descr;
 
 	gdt_descr.address = (unsigned long)get_cpu_gdt_table(0);
 	gdt_descr.size = GDT_SIZE - 1;
 	load_gdt(&gdt_descr);
 
-	cr4 = read_cr4_safe();
-
-	if (cr4 & X86_CR4_PAE) {
-		swapper_pg_dir[pgd_index(0)].pgd =
-		    efi_bak_pg_dir_pointer[0].pgd;
-	} else {
-		swapper_pg_dir[pgd_index(0)].pgd =
-		    efi_bak_pg_dir_pointer[0].pgd;
-		swapper_pg_dir[pgd_index(0x400000)].pgd =
-		    efi_bak_pg_dir_pointer[1].pgd;
-	}
-
-	/*
-	 * After the lock is released, the original page table is restored.
-	 */
+	load_cr3(swapper_pg_dir);
 	__flush_tlb_all();
 
 	local_irq_restore(efi_rt_eflags);
diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c
index b1489a0..ad4ec1c 100644
--- a/arch/x86/platform/mrst/mrst.c
+++ b/arch/x86/platform/mrst/mrst.c
@@ -76,6 +76,20 @@ struct sfi_rtc_table_entry sfi_mrtc_array[SFI_MRTC_MAX];
 EXPORT_SYMBOL_GPL(sfi_mrtc_array);
 int sfi_mrtc_num;
 
+static void mrst_power_off(void)
+{
+	if (__mrst_cpu_chip == MRST_CPU_CHIP_LINCROFT)
+		intel_scu_ipc_simple_command(IPCMSG_COLD_RESET, 1);
+}
+
+static void mrst_reboot(void)
+{
+	if (__mrst_cpu_chip == MRST_CPU_CHIP_LINCROFT)
+		intel_scu_ipc_simple_command(IPCMSG_COLD_RESET, 0);
+	else
+		intel_scu_ipc_simple_command(IPCMSG_COLD_BOOT, 0);
+}
+
 /* parse all the mtimer info to a static mtimer array */
 static int __init sfi_parse_mtmr(struct sfi_table_header *table)
 {
@@ -265,17 +279,6 @@ static int mrst_i8042_detect(void)
 	return 0;
 }
 
-/* Reboot and power off are handled by the SCU on a MID device */
-static void mrst_power_off(void)
-{
-	intel_scu_ipc_simple_command(0xf1, 1);
-}
-
-static void mrst_reboot(void)
-{
-	intel_scu_ipc_simple_command(0xf1, 0);
-}
-
 /*
  * Moorestown does not have external NMI source nor port 0x61 to report
  * NMI status. The possible NMI sources are from pmu as a result of NMI
@@ -484,6 +487,46 @@ static void __init *max7315_platform_data(void *info)
 	return max7315;
 }
 
+static void *tca6416_platform_data(void *info)
+{
+	static struct pca953x_platform_data tca6416;
+	struct i2c_board_info *i2c_info = info;
+	int gpio_base, intr;
+	char base_pin_name[SFI_NAME_LEN + 1];
+	char intr_pin_name[SFI_NAME_LEN + 1];
+
+	strcpy(i2c_info->type, "tca6416");
+	strcpy(base_pin_name, "tca6416_base");
+	strcpy(intr_pin_name, "tca6416_int");
+
+	gpio_base = get_gpio_by_name(base_pin_name);
+	intr = get_gpio_by_name(intr_pin_name);
+
+	if (gpio_base == -1)
+		return NULL;
+	tca6416.gpio_base = gpio_base;
+	if (intr != -1) {
+		i2c_info->irq = intr + MRST_IRQ_OFFSET;
+		tca6416.irq_base = gpio_base + MRST_IRQ_OFFSET;
+	} else {
+		i2c_info->irq = -1;
+		tca6416.irq_base = -1;
+	}
+	return &tca6416;
+}
+
+static void *mpu3050_platform_data(void *info)
+{
+	struct i2c_board_info *i2c_info = info;
+	int intr = get_gpio_by_name("mpu3050_int");
+
+	if (intr == -1)
+		return NULL;
+
+	i2c_info->irq = intr + MRST_IRQ_OFFSET;
+	return NULL;
+}
+
 static void __init *emc1403_platform_data(void *info)
 {
 	static short intr2nd_pdata;
@@ -646,12 +689,15 @@ static void *msic_ocd_platform_data(void *info)
 static const struct devs_id __initconst device_ids[] = {
 	{"bma023", SFI_DEV_TYPE_I2C, 1, &no_platform_data},
 	{"pmic_gpio", SFI_DEV_TYPE_SPI, 1, &pmic_gpio_platform_data},
+	{"pmic_gpio", SFI_DEV_TYPE_IPC, 1, &pmic_gpio_platform_data},
 	{"spi_max3111", SFI_DEV_TYPE_SPI, 0, &max3111_platform_data},
 	{"i2c_max7315", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data},
 	{"i2c_max7315_2", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data},
+	{"tca6416", SFI_DEV_TYPE_I2C, 1, &tca6416_platform_data},
 	{"emc1403", SFI_DEV_TYPE_I2C, 1, &emc1403_platform_data},
 	{"i2c_accel", SFI_DEV_TYPE_I2C, 0, &lis331dl_platform_data},
 	{"pmic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data},
+	{"mpu3050", SFI_DEV_TYPE_I2C, 1, &mpu3050_platform_data},
 
 	/* MSIC subdevices */
 	{"msic_battery", SFI_DEV_TYPE_IPC, 1, &msic_battery_platform_data},
diff --git a/arch/x86/platform/uv/uv_sysfs.c b/arch/x86/platform/uv/uv_sysfs.c
index 309c70f..5d4ba30 100644
--- a/arch/x86/platform/uv/uv_sysfs.c
+++ b/arch/x86/platform/uv/uv_sysfs.c
@@ -19,7 +19,7 @@
  *  Copyright (c) Russ Anderson
  */
 
-#include <linux/sysdev.h>
+#include <linux/device.h>
 #include <asm/uv/bios.h>
 #include <asm/uv/uv.h>
 
diff --git a/arch/x86/tools/Makefile b/arch/x86/tools/Makefile
index f820826..d511aa9 100644
--- a/arch/x86/tools/Makefile
+++ b/arch/x86/tools/Makefile
@@ -18,14 +18,21 @@ chkobjdump = $(srctree)/arch/x86/tools/chkobjdump.awk
 quiet_cmd_posttest = TEST    $@
       cmd_posttest = ($(OBJDUMP) -v | $(AWK) -f $(chkobjdump)) || $(OBJDUMP) -d -j .text $(objtree)/vmlinux | $(AWK) -f $(distill_awk) | $(obj)/test_get_len $(posttest_64bit) $(posttest_verbose)
 
-posttest: $(obj)/test_get_len vmlinux
+quiet_cmd_sanitytest = TEST    $@
+      cmd_sanitytest = $(obj)/insn_sanity $(posttest_64bit) -m 1000000
+
+posttest: $(obj)/test_get_len vmlinux $(obj)/insn_sanity
 	$(call cmd,posttest)
+	$(call cmd,sanitytest)
 
-hostprogs-y	:= test_get_len
+hostprogs-y	+= test_get_len insn_sanity
 
 # -I needed for generated C source and C source which in the kernel tree.
 HOSTCFLAGS_test_get_len.o := -Wall -I$(objtree)/arch/x86/lib/ -I$(srctree)/arch/x86/include/ -I$(srctree)/arch/x86/lib/ -I$(srctree)/include/
 
+HOSTCFLAGS_insn_sanity.o := -Wall -I$(objtree)/arch/x86/lib/ -I$(srctree)/arch/x86/include/ -I$(srctree)/arch/x86/lib/ -I$(srctree)/include/
+
 # Dependencies are also needed.
 $(obj)/test_get_len.o: $(srctree)/arch/x86/lib/insn.c $(srctree)/arch/x86/lib/inat.c $(srctree)/arch/x86/include/asm/inat_types.h $(srctree)/arch/x86/include/asm/inat.h $(srctree)/arch/x86/include/asm/insn.h $(objtree)/arch/x86/lib/inat-tables.c
 
+$(obj)/insn_sanity.o: $(srctree)/arch/x86/lib/insn.c $(srctree)/arch/x86/lib/inat.c $(srctree)/arch/x86/include/asm/inat_types.h $(srctree)/arch/x86/include/asm/inat.h $(srctree)/arch/x86/include/asm/insn.h $(objtree)/arch/x86/lib/inat-tables.c
diff --git a/arch/x86/tools/gen-insn-attr-x86.awk b/arch/x86/tools/gen-insn-attr-x86.awk
index eaf11f5..5f6a5b6 100644
--- a/arch/x86/tools/gen-insn-attr-x86.awk
+++ b/arch/x86/tools/gen-insn-attr-x86.awk
@@ -47,7 +47,7 @@ BEGIN {
 	sep_expr = "^\\|$"
 	group_expr = "^Grp[0-9A-Za-z]+"
 
-	imm_expr = "^[IJAO][a-z]"
+	imm_expr = "^[IJAOL][a-z]"
 	imm_flag["Ib"] = "INAT_MAKE_IMM(INAT_IMM_BYTE)"
 	imm_flag["Jb"] = "INAT_MAKE_IMM(INAT_IMM_BYTE)"
 	imm_flag["Iw"] = "INAT_MAKE_IMM(INAT_IMM_WORD)"
@@ -59,6 +59,7 @@ BEGIN {
 	imm_flag["Iv"] = "INAT_MAKE_IMM(INAT_IMM_VWORD)"
 	imm_flag["Ob"] = "INAT_MOFFSET"
 	imm_flag["Ov"] = "INAT_MOFFSET"
+	imm_flag["Lx"] = "INAT_MAKE_IMM(INAT_IMM_BYTE)"
 
 	modrm_expr = "^([CDEGMNPQRSUVW/][a-z]+|NTA|T[012])"
 	force64_expr = "\\([df]64\\)"
@@ -70,8 +71,12 @@ BEGIN {
 	lprefix3_expr = "\\(F2\\)"
 	max_lprefix = 4
 
-	vexok_expr = "\\(VEX\\)"
-	vexonly_expr = "\\(oVEX\\)"
+	# All opcodes starting with lower-case 'v' or with (v1) superscript
+	# accepts VEX prefix
+	vexok_opcode_expr = "^v.*"
+	vexok_expr = "\\(v1\\)"
+	# All opcodes with (v) superscript supports *only* VEX prefix
+	vexonly_expr = "\\(v\\)"
 
 	prefix_expr = "\\(Prefix\\)"
 	prefix_num["Operand-Size"] = "INAT_PFX_OPNDSZ"
@@ -85,8 +90,8 @@ BEGIN {
 	prefix_num["SEG=GS"] = "INAT_PFX_GS"
 	prefix_num["SEG=SS"] = "INAT_PFX_SS"
 	prefix_num["Address-Size"] = "INAT_PFX_ADDRSZ"
-	prefix_num["2bytes-VEX"] = "INAT_PFX_VEX2"
-	prefix_num["3bytes-VEX"] = "INAT_PFX_VEX3"
+	prefix_num["VEX+1byte"] = "INAT_PFX_VEX2"
+	prefix_num["VEX+2byte"] = "INAT_PFX_VEX3"
 
 	clear_vars()
 }
@@ -310,12 +315,10 @@ function convert_operands(count,opnd,       i,j,imm,mod)
 		if (match(opcode, fpu_expr))
 			flags = add_flags(flags, "INAT_MODRM")
 
-		# check VEX only code
+		# check VEX codes
 		if (match(ext, vexonly_expr))
 			flags = add_flags(flags, "INAT_VEXOK | INAT_VEXONLY")
-
-		# check VEX only code
-		if (match(ext, vexok_expr))
+		else if (match(ext, vexok_expr) || match(opcode, vexok_opcode_expr))
 			flags = add_flags(flags, "INAT_VEXOK")
 
 		# check prefixes
diff --git a/arch/x86/tools/insn_sanity.c b/arch/x86/tools/insn_sanity.c
new file mode 100644
index 0000000..cc2f8c1
--- /dev/null
+++ b/arch/x86/tools/insn_sanity.c
@@ -0,0 +1,275 @@
+/*
+ * x86 decoder sanity test - based on test_get_insn.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2009
+ * Copyright (C) Hitachi, Ltd., 2011
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <assert.h>
+#include <unistd.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+
+#define unlikely(cond) (cond)
+#define ARRAY_SIZE(a)	(sizeof(a)/sizeof(a[0]))
+
+#include <asm/insn.h>
+#include <inat.c>
+#include <insn.c>
+
+/*
+ * Test of instruction analysis against tampering.
+ * Feed random binary to instruction decoder and ensure not to
+ * access out-of-instruction-buffer.
+ */
+
+#define DEFAULT_MAX_ITER	10000
+#define INSN_NOP 0x90
+
+static const char	*prog;		/* Program name */
+static int		verbose;	/* Verbosity */
+static int		x86_64;		/* x86-64 bit mode flag */
+static unsigned int	seed;		/* Random seed */
+static unsigned long	iter_start;	/* Start of iteration number */
+static unsigned long	iter_end = DEFAULT_MAX_ITER;	/* End of iteration number */
+static FILE		*input_file;	/* Input file name */
+
+static void usage(const char *err)
+{
+	if (err)
+		fprintf(stderr, "Error: %s\n\n", err);
+	fprintf(stderr, "Usage: %s [-y|-n|-v] [-s seed[,no]] [-m max] [-i input]\n", prog);
+	fprintf(stderr, "\t-y	64bit mode\n");
+	fprintf(stderr, "\t-n	32bit mode\n");
+	fprintf(stderr, "\t-v	Verbosity(-vv dumps any decoded result)\n");
+	fprintf(stderr, "\t-s	Give a random seed (and iteration number)\n");
+	fprintf(stderr, "\t-m	Give a maximum iteration number\n");
+	fprintf(stderr, "\t-i	Give an input file with decoded binary\n");
+	exit(1);
+}
+
+static void dump_field(FILE *fp, const char *name, const char *indent,
+		       struct insn_field *field)
+{
+	fprintf(fp, "%s.%s = {\n", indent, name);
+	fprintf(fp, "%s\t.value = %d, bytes[] = {%x, %x, %x, %x},\n",
+		indent, field->value, field->bytes[0], field->bytes[1],
+		field->bytes[2], field->bytes[3]);
+	fprintf(fp, "%s\t.got = %d, .nbytes = %d},\n", indent,
+		field->got, field->nbytes);
+}
+
+static void dump_insn(FILE *fp, struct insn *insn)
+{
+	fprintf(fp, "Instruction = {\n");
+	dump_field(fp, "prefixes", "\t",	&insn->prefixes);
+	dump_field(fp, "rex_prefix", "\t",	&insn->rex_prefix);
+	dump_field(fp, "vex_prefix", "\t",	&insn->vex_prefix);
+	dump_field(fp, "opcode", "\t",		&insn->opcode);
+	dump_field(fp, "modrm", "\t",		&insn->modrm);
+	dump_field(fp, "sib", "\t",		&insn->sib);
+	dump_field(fp, "displacement", "\t",	&insn->displacement);
+	dump_field(fp, "immediate1", "\t",	&insn->immediate1);
+	dump_field(fp, "immediate2", "\t",	&insn->immediate2);
+	fprintf(fp, "\t.attr = %x, .opnd_bytes = %d, .addr_bytes = %d,\n",
+		insn->attr, insn->opnd_bytes, insn->addr_bytes);
+	fprintf(fp, "\t.length = %d, .x86_64 = %d, .kaddr = %p}\n",
+		insn->length, insn->x86_64, insn->kaddr);
+}
+
+static void dump_stream(FILE *fp, const char *msg, unsigned long nr_iter,
+			unsigned char *insn_buf, struct insn *insn)
+{
+	int i;
+
+	fprintf(fp, "%s:\n", msg);
+
+	dump_insn(fp, insn);
+
+	fprintf(fp, "You can reproduce this with below command(s);\n");
+
+	/* Input a decoded instruction sequence directly */
+	fprintf(fp, " $ echo ");
+	for (i = 0; i < MAX_INSN_SIZE; i++)
+		fprintf(fp, " %02x", insn_buf[i]);
+	fprintf(fp, " | %s -i -\n", prog);
+
+	if (!input_file) {
+		fprintf(fp, "Or \n");
+		/* Give a seed and iteration number */
+		fprintf(fp, " $ %s -s 0x%x,%lu\n", prog, seed, nr_iter);
+	}
+}
+
+static void init_random_seed(void)
+{
+	int fd;
+
+	fd = open("/dev/urandom", O_RDONLY);
+	if (fd < 0)
+		goto fail;
+
+	if (read(fd, &seed, sizeof(seed)) != sizeof(seed))
+		goto fail;
+
+	close(fd);
+	return;
+fail:
+	usage("Failed to open /dev/urandom");
+}
+
+/* Read given instruction sequence from the input file */
+static int read_next_insn(unsigned char *insn_buf)
+{
+	char buf[256]  = "", *tmp;
+	int i;
+
+	tmp = fgets(buf, ARRAY_SIZE(buf), input_file);
+	if (tmp == NULL || feof(input_file))
+		return 0;
+
+	for (i = 0; i < MAX_INSN_SIZE; i++) {
+		insn_buf[i] = (unsigned char)strtoul(tmp, &tmp, 16);
+		if (*tmp != ' ')
+			break;
+	}
+
+	return i;
+}
+
+static int generate_insn(unsigned char *insn_buf)
+{
+	int i;
+
+	if (input_file)
+		return read_next_insn(insn_buf);
+
+	/* Fills buffer with random binary up to MAX_INSN_SIZE */
+	for (i = 0; i < MAX_INSN_SIZE - 1; i += 2)
+		*(unsigned short *)(&insn_buf[i]) = random() & 0xffff;
+
+	while (i < MAX_INSN_SIZE)
+		insn_buf[i++] = random() & 0xff;
+
+	return i;
+}
+
+static void parse_args(int argc, char **argv)
+{
+	int c;
+	char *tmp = NULL;
+	int set_seed = 0;
+
+	prog = argv[0];
+	while ((c = getopt(argc, argv, "ynvs:m:i:")) != -1) {
+		switch (c) {
+		case 'y':
+			x86_64 = 1;
+			break;
+		case 'n':
+			x86_64 = 0;
+			break;
+		case 'v':
+			verbose++;
+			break;
+		case 'i':
+			if (strcmp("-", optarg) == 0)
+				input_file = stdin;
+			else
+				input_file = fopen(optarg, "r");
+			if (!input_file)
+				usage("Failed to open input file");
+			break;
+		case 's':
+			seed = (unsigned int)strtoul(optarg, &tmp, 0);
+			if (*tmp == ',') {
+				optarg = tmp + 1;
+				iter_start = strtoul(optarg, &tmp, 0);
+			}
+			if (*tmp != '\0' || tmp == optarg)
+				usage("Failed to parse seed");
+			set_seed = 1;
+			break;
+		case 'm':
+			iter_end = strtoul(optarg, &tmp, 0);
+			if (*tmp != '\0' || tmp == optarg)
+				usage("Failed to parse max_iter");
+			break;
+		default:
+			usage(NULL);
+		}
+	}
+
+	/* Check errors */
+	if (iter_end < iter_start)
+		usage("Max iteration number must be bigger than iter-num");
+
+	if (set_seed && input_file)
+		usage("Don't use input file (-i) with random seed (-s)");
+
+	/* Initialize random seed */
+	if (!input_file) {
+		if (!set_seed)	/* No seed is given */
+			init_random_seed();
+		srand(seed);
+	}
+}
+
+int main(int argc, char **argv)
+{
+	struct insn insn;
+	int insns = 0;
+	int errors = 0;
+	unsigned long i;
+	unsigned char insn_buf[MAX_INSN_SIZE * 2];
+
+	parse_args(argc, argv);
+
+	/* Prepare stop bytes with NOPs */
+	memset(insn_buf + MAX_INSN_SIZE, INSN_NOP, MAX_INSN_SIZE);
+
+	for (i = 0; i < iter_end; i++) {
+		if (generate_insn(insn_buf) <= 0)
+			break;
+
+		if (i < iter_start)	/* Skip to given iteration number */
+			continue;
+
+		/* Decode an instruction */
+		insn_init(&insn, insn_buf, x86_64);
+		insn_get_length(&insn);
+
+		if (insn.next_byte <= insn.kaddr ||
+		    insn.kaddr + MAX_INSN_SIZE < insn.next_byte) {
+			/* Access out-of-range memory */
+			dump_stream(stderr, "Error: Found an access violation", i, insn_buf, &insn);
+			errors++;
+		} else if (verbose && !insn_complete(&insn))
+			dump_stream(stdout, "Info: Found an undecodable input", i, insn_buf, &insn);
+		else if (verbose >= 2)
+			dump_insn(stdout, &insn);
+		insns++;
+	}
+
+	fprintf(stdout, "%s: decoded and checked %d %s instructions with %d errors (seed:0x%x)\n", (errors) ? "Failure" : "Success", insns, (input_file) ? "given" : "random", errors, seed);
+
+	return errors ? 1 : 0;
+}
diff --git a/arch/x86/xen/debugfs.c b/arch/x86/xen/debugfs.c
index 7c0fedd..ef1db19 100644
--- a/arch/x86/xen/debugfs.c
+++ b/arch/x86/xen/debugfs.c
@@ -109,7 +109,7 @@ static const struct file_operations u32_array_fops = {
 	.llseek = no_llseek,
 };
 
-struct dentry *xen_debugfs_create_u32_array(const char *name, mode_t mode,
+struct dentry *xen_debugfs_create_u32_array(const char *name, umode_t mode,
 					    struct dentry *parent,
 					    u32 *array, unsigned elements)
 {
diff --git a/arch/x86/xen/debugfs.h b/arch/x86/xen/debugfs.h
index e281320..78d2549 100644
--- a/arch/x86/xen/debugfs.h
+++ b/arch/x86/xen/debugfs.h
@@ -3,7 +3,7 @@
 
 struct dentry * __init xen_init_debugfs(void);
 
-struct dentry *xen_debugfs_create_u32_array(const char *name, mode_t mode,
+struct dentry *xen_debugfs_create_u32_array(const char *name, umode_t mode,
 					    struct dentry *parent,
 					    u32 *array, unsigned elements);
 
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 1f92865..12eb07b 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1215,8 +1215,6 @@ asmlinkage void __init xen_start_kernel(void)
 	local_irq_disable();
 	early_boot_irqs_disabled = true;
 
-	memblock_init();
-
 	xen_raw_console_write("mapping kernel into physical memory\n");
 	pgd = xen_setup_kernel_pagetable(pgd, xen_start_info->nr_pages);
 	xen_ident_map_ISA();
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 87f6673..f4bf8aa 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -1774,10 +1774,8 @@ pgd_t * __init xen_setup_kernel_pagetable(pgd_t *pgd,
 	__xen_write_cr3(true, __pa(pgd));
 	xen_mc_issue(PARAVIRT_LAZY_CPU);
 
-	memblock_x86_reserve_range(__pa(xen_start_info->pt_base),
-		      __pa(xen_start_info->pt_base +
-			   xen_start_info->nr_pt_frames * PAGE_SIZE),
-		      "XEN PAGETABLES");
+	memblock_reserve(__pa(xen_start_info->pt_base),
+			 xen_start_info->nr_pt_frames * PAGE_SIZE);
 
 	return pgd;
 }
@@ -1853,10 +1851,8 @@ pgd_t * __init xen_setup_kernel_pagetable(pgd_t *pgd,
 			  PFN_DOWN(__pa(initial_page_table)));
 	xen_write_cr3(__pa(initial_page_table));
 
-	memblock_x86_reserve_range(__pa(xen_start_info->pt_base),
-		      __pa(xen_start_info->pt_base +
-			   xen_start_info->nr_pt_frames * PAGE_SIZE),
-		      "XEN PAGETABLES");
+	memblock_reserve(__pa(xen_start_info->pt_base),
+			 xen_start_info->nr_pt_frames * PAGE_SIZE));
 
 	return initial_page_table;
 }
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index 38d0af4..e03c636 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -75,7 +75,7 @@ static void __init xen_add_extra_mem(u64 start, u64 size)
 	if (i == XEN_EXTRA_MEM_MAX_REGIONS)
 		printk(KERN_WARNING "Warning: not enough extra memory regions\n");
 
-	memblock_x86_reserve_range(start, start + size, "XEN EXTRA");
+	memblock_reserve(start, size);
 
 	xen_max_p2m_pfn = PFN_DOWN(start + size);
 
@@ -173,9 +173,21 @@ static unsigned long __init xen_get_max_pages(void)
 	domid_t domid = DOMID_SELF;
 	int ret;
 
-	ret = HYPERVISOR_memory_op(XENMEM_maximum_reservation, &domid);
-	if (ret > 0)
-		max_pages = ret;
+	/*
+	 * For the initial domain we use the maximum reservation as
+	 * the maximum page.
+	 *
+	 * For guest domains the current maximum reservation reflects
+	 * the current maximum rather than the static maximum. In this
+	 * case the e820 map provided to us will cover the static
+	 * maximum region.
+	 */
+	if (xen_initial_domain()) {
+		ret = HYPERVISOR_memory_op(XENMEM_maximum_reservation, &domid);
+		if (ret > 0)
+			max_pages = ret;
+	}
+
 	return min(max_pages, MAX_DOMAIN_PAGES);
 }
 
@@ -299,9 +311,8 @@ char * __init xen_memory_setup(void)
 	 *  - xen_start_info
 	 * See comment above "struct start_info" in <xen/interface/xen.h>
 	 */
-	memblock_x86_reserve_range(__pa(xen_start_info->mfn_list),
-		      __pa(xen_start_info->pt_base),
-			"XEN START INFO");
+	memblock_reserve(__pa(xen_start_info->mfn_list),
+			 xen_start_info->pt_base - xen_start_info->mfn_list);
 
 	sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
 
@@ -410,6 +421,6 @@ void __init xen_arch_setup(void)
 #endif
 	disable_cpuidle();
 	boot_option_idle_override = IDLE_HALT;
-
+	WARN_ON(set_pm_idle_to_default());
 	fiddle_vdso();
 }
diff --git a/arch/xtensa/include/asm/socket.h b/arch/xtensa/include/asm/socket.h
index cbdf2ff..bb06968 100644
--- a/arch/xtensa/include/asm/socket.h
+++ b/arch/xtensa/include/asm/socket.h
@@ -73,4 +73,7 @@
 
 #define SO_RXQ_OVFL             40
 
+#define SO_WIFI_STATUS		41
+#define SCM_WIFI_STATUS		SO_WIFI_STATUS
+
 #endif	/* _XTENSA_SOCKET_H */
diff --git a/arch/xtensa/include/asm/thread_info.h b/arch/xtensa/include/asm/thread_info.h
index 7be8acc..6abbedd 100644
--- a/arch/xtensa/include/asm/thread_info.h
+++ b/arch/xtensa/include/asm/thread_info.h
@@ -132,7 +132,6 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_MEMDIE		5	/* is terminating due to OOM killer */
 #define TIF_RESTORE_SIGMASK	6	/* restore signal mask in do_signal() */
 #define TIF_POLLING_NRFLAG	16	/* true if poll_idle() is polling TIF_NEED_RESCHED */
-#define TIF_FREEZE		17	/* is freezing for suspend */
 
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
 #define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
@@ -141,7 +140,6 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_IRET		(1<<TIF_IRET)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
 #define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
-#define _TIF_FREEZE		(1<<TIF_FREEZE)
 
 #define _TIF_WORK_MASK		0x0000FFFE	/* work to do on interrupt/exception return */
 #define _TIF_ALLWORK_MASK	0x0000FFFF	/* work to do on any return to u-space */
diff --git a/arch/xtensa/include/asm/types.h b/arch/xtensa/include/asm/types.h
index b1c981e..6d4db7e 100644
--- a/arch/xtensa/include/asm/types.h
+++ b/arch/xtensa/include/asm/types.h
@@ -23,8 +23,6 @@
 
 #ifndef __ASSEMBLY__
 
-typedef unsigned short umode_t;
-
 /*
  * These aren't exported outside the kernel to avoid name space clashes
  */
diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c
index f3e5eb4..ac62f9c 100644
--- a/arch/xtensa/kernel/time.c
+++ b/arch/xtensa/kernel/time.c
@@ -41,14 +41,6 @@ static struct clocksource ccount_clocksource = {
 	.rating = 200,
 	.read = ccount_read,
 	.mask = CLOCKSOURCE_MASK(32),
-	/*
-	 * With a shift of 22 the lower limit of the cpu clock is
-	 * 1MHz, where NSEC_PER_CCOUNT is 1000 or a bit less than
-	 * 2^10: Since we have 32 bits and the multiplicator can
-	 * already take up as much as 10 bits, this leaves us with
-	 * remaining upper 22 bits.
-	 */
-	.shift = 22,
 };
 
 static irqreturn_t timer_interrupt(int irq, void *dev_id);
@@ -66,10 +58,7 @@ void __init time_init(void)
 	printk("%d.%02d MHz\n", (int)ccount_per_jiffy/(1000000/HZ),
 			(int)(ccount_per_jiffy/(10000/HZ))%100);
 #endif
-	ccount_clocksource.mult =
-		clocksource_hz2mult(CCOUNT_PER_JIFFY * HZ,
-				ccount_clocksource.shift);
-	clocksource_register(&ccount_clocksource);
+	clocksource_register_hz(&ccount_clocksource, CCOUNT_PER_JIFFY * HZ);
 
 	/* Initialize the linux timer interrupt. */