diff options
Diffstat (limited to 'arch')
51 files changed, 681 insertions, 396 deletions
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 3b0a953..c1b7370 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -98,7 +98,6 @@ obj-y += leds.o # Power Management obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_AT91_SLOW_CLOCK) += pm_slowclock.o -obj-$(CONFIG_CPU_IDLE) += cpuidle.o ifeq ($(CONFIG_PM_DEBUG),y) CFLAGS_pm.o += -DDEBUG diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 4aad93d..25805f2 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -27,6 +27,7 @@ #include "generic.h" #include "clock.h" #include "sam9_smc.h" +#include "pm.h" /* -------------------------------------------------------------------- * Clocks @@ -327,6 +328,7 @@ static void __init at91rm9200_ioremap_registers(void) { at91rm9200_ioremap_st(AT91RM9200_BASE_ST); at91_ioremap_ramc(0, AT91RM9200_BASE_MC, 256); + at91_pm_set_standby(at91rm9200_standby); } static void __init at91rm9200_initialize(void) diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index 5de6074..f8629a3 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -28,6 +28,7 @@ #include "generic.h" #include "clock.h" #include "sam9_smc.h" +#include "pm.h" /* -------------------------------------------------------------------- * Clocks @@ -342,6 +343,7 @@ static void __init at91sam9260_ioremap_registers(void) at91sam926x_ioremap_pit(AT91SAM9260_BASE_PIT); at91sam9_ioremap_smc(0, AT91SAM9260_BASE_SMC); at91_ioremap_matrix(AT91SAM9260_BASE_MATRIX); + at91_pm_set_standby(at91sam9_sdram_standby); } static void __init at91sam9260_initialize(void) diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index 0e07932..1f3867a 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -27,6 +27,7 @@ #include "generic.h" #include "clock.h" #include "sam9_smc.h" +#include "pm.h" /* -------------------------------------------------------------------- * Clocks @@ -284,6 +285,7 @@ static void __init at91sam9261_ioremap_registers(void) at91sam926x_ioremap_pit(AT91SAM9261_BASE_PIT); at91sam9_ioremap_smc(0, AT91SAM9261_BASE_SMC); at91_ioremap_matrix(AT91SAM9261_BASE_MATRIX); + at91_pm_set_standby(at91sam9_sdram_standby); } static void __init at91sam9261_initialize(void) diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 6ce7d18..90d455d 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -26,6 +26,7 @@ #include "generic.h" #include "clock.h" #include "sam9_smc.h" +#include "pm.h" /* -------------------------------------------------------------------- * Clocks @@ -321,6 +322,7 @@ static void __init at91sam9263_ioremap_registers(void) at91sam9_ioremap_smc(0, AT91SAM9263_BASE_SMC0); at91sam9_ioremap_smc(1, AT91SAM9263_BASE_SMC1); at91_ioremap_matrix(AT91SAM9263_BASE_MATRIX); + at91_pm_set_standby(at91sam9_sdram_standby); } static void __init at91sam9263_initialize(void) diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 474ee04..e9bf0b8 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -26,6 +26,7 @@ #include "generic.h" #include "clock.h" #include "sam9_smc.h" +#include "pm.h" /* -------------------------------------------------------------------- * Clocks @@ -370,6 +371,7 @@ static void __init at91sam9g45_ioremap_registers(void) at91sam926x_ioremap_pit(AT91SAM9G45_BASE_PIT); at91sam9_ioremap_smc(0, AT91SAM9G45_BASE_SMC); at91_ioremap_matrix(AT91SAM9G45_BASE_MATRIX); + at91_pm_set_standby(at91_ddr_standby); } static void __init at91sam9g45_initialize(void) diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index d4ec0d9..88995af 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -27,6 +27,7 @@ #include "generic.h" #include "clock.h" #include "sam9_smc.h" +#include "pm.h" /* -------------------------------------------------------------------- * Clocks @@ -287,6 +288,7 @@ static void __init at91sam9rl_ioremap_registers(void) at91sam926x_ioremap_pit(AT91SAM9RL_BASE_PIT); at91sam9_ioremap_smc(0, AT91SAM9RL_BASE_SMC); at91_ioremap_matrix(AT91SAM9RL_BASE_MATRIX); + at91_pm_set_standby(at91sam9_sdram_standby); } static void __init at91sam9rl_initialize(void) diff --git a/arch/arm/mach-at91/cpuidle.c b/arch/arm/mach-at91/cpuidle.c deleted file mode 100644 index 4ec6a6d..0000000 --- a/arch/arm/mach-at91/cpuidle.c +++ /dev/null @@ -1,68 +0,0 @@ -/* - * based on arch/arm/mach-kirkwood/cpuidle.c - * - * CPU idle support for AT91 SoC - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - * - * The cpu idle uses wait-for-interrupt and RAM self refresh in order - * to implement two idle states - - * #1 wait-for-interrupt - * #2 wait-for-interrupt and RAM self refresh - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/cpuidle.h> -#include <linux/io.h> -#include <linux/export.h> -#include <asm/proc-fns.h> -#include <asm/cpuidle.h> -#include <mach/cpu.h> - -#include "pm.h" - -#define AT91_MAX_STATES 2 - -/* Actual code that puts the SoC in different idle states */ -static int at91_enter_idle(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) -{ - if (cpu_is_at91rm9200()) - at91rm9200_standby(); - else if (cpu_is_at91sam9g45()) - at91sam9g45_standby(); - else if (cpu_is_at91sam9263()) - at91sam9263_standby(); - else - at91sam9_standby(); - - return index; -} - -static struct cpuidle_driver at91_idle_driver = { - .name = "at91_idle", - .owner = THIS_MODULE, - .states[0] = ARM_CPUIDLE_WFI_STATE, - .states[1] = { - .enter = at91_enter_idle, - .exit_latency = 10, - .target_residency = 10000, - .flags = CPUIDLE_FLAG_TIME_VALID, - .name = "RAM_SR", - .desc = "WFI and DDR Self Refresh", - }, - .state_count = AT91_MAX_STATES, -}; - -/* Initialize CPU idle by registering the idle states */ -static int __init at91_init_cpuidle(void) -{ - return cpuidle_register(&at91_idle_driver, NULL); -} - -device_initcall(at91_init_cpuidle); diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 15afb5d..9986542 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -39,6 +39,8 @@ #include "at91_rstc.h" #include "at91_shdwc.h" +static void (*at91_pm_standby)(void); + static void __init show_reset_status(void) { static char reset[] __initdata = "reset"; @@ -266,14 +268,8 @@ static int at91_pm_enter(suspend_state_t state) * For ARM 926 based chips, this requirement is weaker * as at91sam9 can access a RAM in self-refresh mode. */ - if (cpu_is_at91rm9200()) - at91rm9200_standby(); - else if (cpu_is_at91sam9g45()) - at91sam9g45_standby(); - else if (cpu_is_at91sam9263()) - at91sam9263_standby(); - else - at91sam9_standby(); + if (at91_pm_standby) + at91_pm_standby(); break; case PM_SUSPEND_ON: @@ -314,6 +310,18 @@ static const struct platform_suspend_ops at91_pm_ops = { .end = at91_pm_end, }; +static struct platform_device at91_cpuidle_device = { + .name = "cpuidle-at91", +}; + +void at91_pm_set_standby(void (*at91_standby)(void)) +{ + if (at91_standby) { + at91_cpuidle_device.dev.platform_data = at91_standby; + at91_pm_standby = at91_standby; + } +} + static int __init at91_pm_init(void) { #ifdef CONFIG_AT91_SLOW_CLOCK @@ -325,6 +333,9 @@ static int __init at91_pm_init(void) /* AT91RM9200 SDRAM low-power mode cannot be used with self-refresh. */ if (cpu_is_at91rm9200()) at91_ramc_write(0, AT91RM9200_SDRAMC_LPR, 0); + + if (at91_cpuidle_device.dev.platform_data) + platform_device_register(&at91_cpuidle_device); suspend_set_ops(&at91_pm_ops); diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h index 2f5908f..3ed190c 100644 --- a/arch/arm/mach-at91/pm.h +++ b/arch/arm/mach-at91/pm.h @@ -11,9 +11,13 @@ #ifndef __ARCH_ARM_MACH_AT91_PM #define __ARCH_ARM_MACH_AT91_PM +#include <asm/proc-fns.h> + #include <mach/at91_ramc.h> #include <mach/at91rm9200_sdramc.h> +extern void at91_pm_set_standby(void (*at91_standby)(void)); + /* * The AT91RM9200 goes into self-refresh mode with this command, and will * terminate self-refresh automatically on the next SDRAM access. @@ -45,16 +49,18 @@ static inline void at91rm9200_standby(void) /* We manage both DDRAM/SDRAM controllers, we need more than one value to * remember. */ -static inline void at91sam9g45_standby(void) +static inline void at91_ddr_standby(void) { /* Those two values allow us to delay self-refresh activation * to the maximum. */ - u32 lpr0, lpr1; - u32 saved_lpr0, saved_lpr1; + u32 lpr0, lpr1 = 0; + u32 saved_lpr0, saved_lpr1 = 0; - saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR); - lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB; - lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH; + if (at91_ramc_base[1]) { + saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR); + lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB; + lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH; + } saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR); lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB; @@ -62,25 +68,29 @@ static inline void at91sam9g45_standby(void) /* self-refresh mode now */ at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0); - at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1); + if (at91_ramc_base[1]) + at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1); cpu_do_idle(); at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0); - at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1); + if (at91_ramc_base[1]) + at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1); } /* We manage both DDRAM/SDRAM controllers, we need more than one value to * remember. */ -static inline void at91sam9263_standby(void) +static inline void at91sam9_sdram_standby(void) { - u32 lpr0, lpr1; - u32 saved_lpr0, saved_lpr1; + u32 lpr0, lpr1 = 0; + u32 saved_lpr0, saved_lpr1 = 0; - saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR); - lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB; - lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH; + if (at91_ramc_base[1]) { + saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR); + lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB; + lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH; + } saved_lpr0 = at91_ramc_read(0, AT91_SDRAMC_LPR); lpr0 = saved_lpr0 & ~AT91_SDRAMC_LPCB; @@ -88,27 +98,14 @@ static inline void at91sam9263_standby(void) /* self-refresh mode now */ at91_ramc_write(0, AT91_SDRAMC_LPR, lpr0); - at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1); + if (at91_ramc_base[1]) + at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1); cpu_do_idle(); at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr0); - at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1); -} - -static inline void at91sam9_standby(void) -{ - u32 saved_lpr, lpr; - - saved_lpr = at91_ramc_read(0, AT91_SDRAMC_LPR); - - lpr = saved_lpr & ~AT91_SDRAMC_LPCB; - at91_ramc_write(0, AT91_SDRAMC_LPR, lpr | - AT91_SDRAMC_LPCB_SELF_REFRESH); - - cpu_do_idle(); - - at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr); + if (at91_ramc_base[1]) + at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1); } #endif diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index b17fbcf..094b345 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -23,6 +23,7 @@ #include "at91_shdwc.h" #include "soc.h" #include "generic.h" +#include "pm.h" struct at91_init_soc __initdata at91_boot_soc; @@ -376,15 +377,16 @@ static void at91_dt_rstc(void) } static struct of_device_id ramc_ids[] = { - { .compatible = "atmel,at91rm9200-sdramc" }, - { .compatible = "atmel,at91sam9260-sdramc" }, - { .compatible = "atmel,at91sam9g45-ddramc" }, + { .compatible = "atmel,at91rm9200-sdramc", .data = at91rm9200_standby }, + { .compatible = "atmel,at91sam9260-sdramc", .data = at91sam9_sdram_standby }, + { .compatible = "atmel,at91sam9g45-ddramc", .data = at91_ddr_standby }, { /*sentinel*/ } }; static void at91_dt_ramc(void) { struct device_node *np; + const struct of_device_id *of_id; np = of_find_matching_node(NULL, ramc_ids); if (!np) @@ -396,6 +398,12 @@ static void at91_dt_ramc(void) /* the controller may have 2 banks */ at91_ramc_base[1] = of_iomap(np, 1); + of_id = of_match_node(ramc_ids, np); + if (!of_id) + pr_warn("AT91: ramc no standby function available\n"); + else + at91_pm_set_standby(of_id->data); + of_node_put(np); } diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index e026b19..a075b3e 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -40,7 +40,6 @@ config ARCH_DAVINCI_DA850 bool "DA850/OMAP-L138/AM18x based system" select ARCH_DAVINCI_DA8XX select ARCH_HAS_CPUFREQ - select CPU_FREQ_TABLE select CP_INTC config ARCH_DAVINCI_DA8XX diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index a4e7ba8..61d2906 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -28,6 +28,7 @@ #include <linux/of_address.h> #include <linux/irqchip/arm-gic.h> #include <linux/irqchip/chained_irq.h> +#include <linux/platform_device.h> #include <asm/proc-fns.h> #include <asm/exception.h> @@ -292,6 +293,16 @@ void exynos5_restart(enum reboot_mode mode, const char *cmd) __raw_writel(val, addr); } +static struct platform_device exynos_cpuidle = { + .name = "exynos_cpuidle", + .id = -1, +}; + +void __init exynos_cpuidle_init(void) +{ + platform_device_register(&exynos_cpuidle); +} + void __init exynos_init_late(void) { if (of_machine_is_compatible("samsung,exynos5440")) diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index f0fa205..ff9b6a9 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -21,6 +21,7 @@ struct map_desc; void exynos_init_io(void); void exynos4_restart(enum reboot_mode mode, const char *cmd); void exynos5_restart(enum reboot_mode mode, const char *cmd); +void exynos_cpuidle_init(void); void exynos_init_late(void); void exynos_firmware_init(void); diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c index ac139226..ddbfe87 100644 --- a/arch/arm/mach-exynos/cpuidle.c +++ b/arch/arm/mach-exynos/cpuidle.c @@ -15,6 +15,7 @@ #include <linux/io.h> #include <linux/export.h> #include <linux/time.h> +#include <linux/platform_device.h> #include <asm/proc-fns.h> #include <asm/smp_scu.h> @@ -192,7 +193,7 @@ static void __init exynos5_core_down_clk(void) __raw_writel(tmp, EXYNOS5_PWR_CTRL2); } -static int __init exynos4_init_cpuidle(void) +static int exynos_cpuidle_probe(struct platform_device *pdev) { int cpu_id, ret; struct cpuidle_device *device; @@ -205,7 +206,7 @@ static int __init exynos4_init_cpuidle(void) ret = cpuidle_register_driver(&exynos4_idle_driver); if (ret) { - printk(KERN_ERR "CPUidle failed to register driver\n"); + dev_err(&pdev->dev, "failed to register cpuidle driver\n"); return ret; } @@ -219,11 +220,20 @@ static int __init exynos4_init_cpuidle(void) ret = cpuidle_register_device(device); if (ret) { - printk(KERN_ERR "CPUidle register device failed\n"); + dev_err(&pdev->dev, "failed to register cpuidle device\n"); return ret; } } return 0; } -device_initcall(exynos4_init_cpuidle); + +static struct platform_driver exynos_cpuidle_driver = { + .probe = exynos_cpuidle_probe, + .driver = { + .name = "exynos_cpuidle", + .owner = THIS_MODULE, + }, +}; + +module_platform_driver(exynos_cpuidle_driver); diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c index 4b8f6e2..4603e6b 100644 --- a/arch/arm/mach-exynos/mach-exynos4-dt.c +++ b/arch/arm/mach-exynos/mach-exynos4-dt.c @@ -21,6 +21,8 @@ static void __init exynos4_dt_machine_init(void) { + exynos_cpuidle_init(); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c index 7976ab3..1fe075a 100644 --- a/arch/arm/mach-exynos/mach-exynos5-dt.c +++ b/arch/arm/mach-exynos/mach-exynos5-dt.c @@ -43,6 +43,8 @@ static void __init exynos5_dt_machine_init(void) } } + exynos_cpuidle_init(); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 0f9f241..d0cfb22 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -22,7 +22,7 @@ #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/of_platform.h> -#include <linux/opp.h> +#include <linux/pm_opp.h> #include <linux/phy.h> #include <linux/reboot.h> #include <linux/regmap.h> @@ -176,7 +176,7 @@ static void __init imx6q_opp_check_1p2ghz(struct device *cpu_dev) val = readl_relaxed(base + OCOTP_CFG3); val >>= OCOTP_CFG3_SPEED_SHIFT; if ((val & 0x3) != OCOTP_CFG3_SPEED_1P2GHZ) - if (opp_disable(cpu_dev, 1200000000)) + if (dev_pm_opp_disable(cpu_dev, 1200000000)) pr_warn("failed to disable 1.2 GHz OPP\n"); put_node: diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 8b9cd06..a516c1b 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -25,7 +25,7 @@ #include <linux/gpio.h> #include <linux/input.h> #include <linux/gpio_keys.h> -#include <linux/opp.h> +#include <linux/pm_opp.h> #include <linux/cpu.h> #include <linux/mtd/mtd.h> @@ -516,11 +516,11 @@ static int __init beagle_opp_init(void) return -ENODEV; } /* Enable MPU 1GHz and lower opps */ - r = opp_enable(mpu_dev, 800000000); + r = dev_pm_opp_enable(mpu_dev, 800000000); /* TODO: MPU 1GHz needs SR and ABB */ /* Enable IVA 800MHz and lower opps */ - r |= opp_enable(iva_dev, 660000000); + r |= dev_pm_opp_enable(iva_dev, 660000000); /* TODO: DSP 800MHz needs SR and ABB */ if (r) { pr_err("%s: failed to enable higher opp %d\n", @@ -529,8 +529,8 @@ static int __init beagle_opp_init(void) * Cleanup - disable the higher freqs - we dont care * about the results */ - opp_disable(mpu_dev, 800000000); - opp_disable(iva_dev, 660000000); + dev_pm_opp_disable(mpu_dev, 800000000); + dev_pm_opp_disable(iva_dev, 660000000); } } return 0; diff --git a/arch/arm/mach-omap2/omap-pm.h b/arch/arm/mach-omap2/omap-pm.h index 67faa7b..1d777e6 100644 --- a/arch/arm/mach-omap2/omap-pm.h +++ b/arch/arm/mach-omap2/omap-pm.h @@ -17,7 +17,7 @@ #include <linux/device.h> #include <linux/cpufreq.h> #include <linux/clk.h> -#include <linux/opp.h> +#include <linux/pm_opp.h> /* * agent_id values for use with omap_pm_set_min_bus_tput(): diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c index 82fd8c7..a358a07 100644 --- a/arch/arm/mach-omap2/opp.c +++ b/arch/arm/mach-omap2/opp.c @@ -18,7 +18,7 @@ */ #include <linux/module.h> #include <linux/of.h> -#include <linux/opp.h> +#include <linux/pm_opp.h> #include <linux/cpu.h> #include "omap_device.h" @@ -85,14 +85,14 @@ int __init omap_init_opp_table(struct omap_opp_def *opp_def, dev = &oh->od->pdev->dev; } - r = opp_add(dev, opp_def->freq, opp_def->u_volt); + r = dev_pm_opp_add(dev, opp_def->freq, opp_def->u_volt); if (r) { dev_err(dev, "%s: add OPP %ld failed for %s [%d] result=%d\n", __func__, opp_def->freq, opp_def->hwmod_name, i, r); } else { if (!opp_def->default_available) - r = opp_disable(dev, opp_def->freq); + r = dev_pm_opp_disable(dev, opp_def->freq); if (r) dev_err(dev, "%s: disable %ld failed for %s [%d] result=%d\n", __func__, opp_def->freq, diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 360b2da..e1b4141 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -13,7 +13,7 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/err.h> -#include <linux/opp.h> +#include <linux/pm_opp.h> #include <linux/export.h> #include <linux/suspend.h> #include <linux/cpu.h> @@ -131,7 +131,7 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name, { struct voltagedomain *voltdm; struct clk *clk; - struct opp *opp; + struct dev_pm_opp *opp; unsigned long freq, bootup_volt; struct device *dev; @@ -172,7 +172,7 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name, clk_put(clk); rcu_read_lock(); - opp = opp_find_freq_ceil(dev, &freq); + opp = dev_pm_opp_find_freq_ceil(dev, &freq); if (IS_ERR(opp)) { rcu_read_unlock(); pr_err("%s: unable to find boot up OPP for vdd_%s\n", @@ -180,7 +180,7 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name, goto exit; } - bootup_volt = opp_get_voltage(opp); + bootup_volt = dev_pm_opp_get_voltage(opp); rcu_read_unlock(); if (!bootup_volt) { pr_err("%s: unable to find voltage corresponding to the bootup OPP for vdd_%s\n", diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index a842711..96100db 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -615,14 +615,12 @@ endmenu config PXA25x bool select CPU_XSCALE - select CPU_FREQ_TABLE if CPU_FREQ help Select code specific to PXA21x/25x/26x variants config PXA27x bool select CPU_XSCALE - select CPU_FREQ_TABLE if CPU_FREQ help Select code specific to PXA27x variants @@ -635,7 +633,6 @@ config CPU_PXA26x config PXA3xx bool select CPU_XSC3 - select CPU_FREQ_TABLE if CPU_FREQ help Select code specific to PXA3xx variants diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index f25b611..d4ea142 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -42,74 +42,31 @@ EXPORT_SYMBOL(reset_status); /* * This table is setup for a 3.6864MHz Crystal. */ -static const unsigned short cclk_frequency_100khz[NR_FREQS] = { - 590, /* 59.0 MHz */ - 737, /* 73.7 MHz */ - 885, /* 88.5 MHz */ - 1032, /* 103.2 MHz */ - 1180, /* 118.0 MHz */ - 1327, /* 132.7 MHz */ - 1475, /* 147.5 MHz */ - 1622, /* 162.2 MHz */ - 1769, /* 176.9 MHz */ - 1917, /* 191.7 MHz */ - 2064, /* 206.4 MHz */ - 2212, /* 221.2 MHz */ - 2359, /* 235.9 MHz */ - 2507, /* 250.7 MHz */ - 2654, /* 265.4 MHz */ - 2802 /* 280.2 MHz */ +struct cpufreq_frequency_table sa11x0_freq_table[NR_FREQS+1] = { + { .frequency = 59000, /* 59.0 MHz */}, + { .frequency = 73700, /* 73.7 MHz */}, + { .frequency = 88500, /* 88.5 MHz */}, + { .frequency = 103200, /* 103.2 MHz */}, + { .frequency = 118000, /* 118.0 MHz */}, + { .frequency = 132700, /* 132.7 MHz */}, + { .frequency = 147500, /* 147.5 MHz */}, + { .frequency = 162200, /* 162.2 MHz */}, + { .frequency = 176900, /* 176.9 MHz */}, + { .frequency = 191700, /* 191.7 MHz */}, + { .frequency = 206400, /* 206.4 MHz */}, + { .frequency = 221200, /* 221.2 MHz */}, + { .frequency = 235900, /* 235.9 MHz */}, + { .frequency = 250700, /* 250.7 MHz */}, + { .frequency = 265400, /* 265.4 MHz */}, + { .frequency = 280200, /* 280.2 MHz */}, + { .frequency = CPUFREQ_TABLE_END, }, }; -/* rounds up(!) */ -unsigned int sa11x0_freq_to_ppcr(unsigned int khz) -{ - int i; - - khz /= 100; - - for (i = 0; i < NR_FREQS; i++) - if (cclk_frequency_100khz[i] >= khz) - break; - - return i; -} - -unsigned int sa11x0_ppcr_to_freq(unsigned int idx) -{ - unsigned int freq = 0; - if (idx < NR_FREQS) - freq = cclk_frequency_100khz[idx] * 100; - return freq; -} - - -/* make sure that only the "userspace" governor is run -- anything else wouldn't make sense on - * this platform, anyway. - */ -int sa11x0_verify_speed(struct cpufreq_policy *policy) -{ - unsigned int tmp; - if (policy->cpu) - return -EINVAL; - - cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq); - - /* make sure that at least one frequency is within the policy */ - tmp = cclk_frequency_100khz[sa11x0_freq_to_ppcr(policy->min)] * 100; - if (tmp > policy->max) - policy->max = tmp; - - cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq); - - return 0; -} - unsigned int sa11x0_getspeed(unsigned int cpu) { if (cpu) return 0; - return cclk_frequency_100khz[PPCR & 0xf] * 100; + return sa11x0_freq_table[PPCR & 0xf].frequency; } /* diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h index 9a33695..0d92e11 100644 --- a/arch/arm/mach-sa1100/generic.h +++ b/arch/arm/mach-sa1100/generic.h @@ -3,6 +3,7 @@ * * Author: Nicolas Pitre */ +#include <linux/cpufreq.h> #include <linux/reboot.h> extern void sa1100_timer_init(void); @@ -19,12 +20,8 @@ extern void sa11x0_init_late(void); extern void sa1110_mb_enable(void); extern void sa1110_mb_disable(void); -struct cpufreq_policy; - -extern unsigned int sa11x0_freq_to_ppcr(unsigned int khz); -extern int sa11x0_verify_speed(struct cpufreq_policy *policy); +extern struct cpufreq_frequency_table sa11x0_freq_table[]; extern unsigned int sa11x0_getspeed(unsigned int cpu); -extern unsigned int sa11x0_ppcr_to_freq(unsigned int idx); struct flash_platform_data; struct resource; diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index c67f8ad..0034d2c 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -29,7 +29,6 @@ if ARCH_U8500 config UX500_SOC_DB8500 bool - select CPU_FREQ_TABLE if CPU_FREQ select MFD_DB8500_PRCMU select PINCTRL_DB8500 select PINCTRL_DB8540 diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index cbbb81e..4a70be4 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -65,10 +65,22 @@ config ARCH_VEXPRESS_DCSCB This is needed to provide CPU and cluster power management on RTSM implementing big.LITTLE. +config ARCH_VEXPRESS_SPC + bool "Versatile Express Serial Power Controller (SPC)" + select ARCH_HAS_CPUFREQ + select ARCH_HAS_OPP + select PM_OPP + help + The TC2 (A15x2 A7x3) versatile express core tile integrates a logic + block called Serial Power Controller (SPC) that provides the interface + between the dual cluster test-chip and the M3 microcontroller that + carries out power management. + config ARCH_VEXPRESS_TC2_PM bool "Versatile Express TC2 power management" depends on MCPM select ARM_CCI + select ARCH_VEXPRESS_SPC help Support for CPU and cluster power management on Versatile Express with a TC2 (A15x2 A7x3) big.LITTLE core tile. diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile index 505e64a..0997e0b 100644 --- a/arch/arm/mach-vexpress/Makefile +++ b/arch/arm/mach-vexpress/Makefile @@ -8,7 +8,8 @@ obj-y := v2m.o obj-$(CONFIG_ARCH_VEXPRESS_CA9X4) += ct-ca9x4.o obj-$(CONFIG_ARCH_VEXPRESS_DCSCB) += dcscb.o dcscb_setup.o CFLAGS_dcscb.o += -march=armv7-a -obj-$(CONFIG_ARCH_VEXPRESS_TC2_PM) += tc2_pm.o spc.o +obj-$(CONFIG_ARCH_VEXPRESS_SPC) += spc.o +obj-$(CONFIG_ARCH_VEXPRESS_TC2_PM) += tc2_pm.o CFLAGS_tc2_pm.o += -march=armv7-a obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-vexpress/spc.c b/arch/arm/mach-vexpress/spc.c index eefb029..033d34d 100644 --- a/arch/arm/mach-vexpress/spc.c +++ b/arch/arm/mach-vexpress/spc.c @@ -17,14 +17,31 @@ * GNU General Public License for more details. */ +#include <linux/clk-provider.h> +#include <linux/clkdev.h> +#include <linux/cpu.h> +#include <linux/delay.h> #include <linux/err.h> +#include <linux/interrupt.h> #include <linux/io.h> +#include <linux/platform_device.h> +#include <linux/pm_opp.h> #include <linux/slab.h> +#include <linux/semaphore.h> #include <asm/cacheflush.h> #define SPCLOG "vexpress-spc: " +#define PERF_LVL_A15 0x00 +#define PERF_REQ_A15 0x04 +#define PERF_LVL_A7 0x08 +#define PERF_REQ_A7 0x0c +#define COMMS 0x10 +#define COMMS_REQ 0x14 +#define PWC_STATUS 0x18 +#define PWC_FLAG 0x1c + /* SPC wake-up IRQs status and mask */ #define WAKE_INT_MASK 0x24 #define WAKE_INT_RAW 0x28 @@ -36,12 +53,45 @@ #define A15_BX_ADDR0 0x68 #define A7_BX_ADDR0 0x78 +/* SPC system config interface registers */ +#define SYSCFG_WDATA 0x70 +#define SYSCFG_RDATA 0x74 + +/* A15/A7 OPP virtual register base */ +#define A15_PERFVAL_BASE 0xC10 +#define A7_PERFVAL_BASE 0xC30 + +/* Config interface control bits */ +#define SYSCFG_START (1 << 31) +#define SYSCFG_SCC (6 << 20) +#define SYSCFG_STAT (14 << 20) + /* wake-up interrupt masks */ #define GBL_WAKEUP_INT_MSK (0x3 << 10) /* TC2 static dual-cluster configuration */ #define MAX_CLUSTERS 2 +/* + * Even though the SPC takes max 3-5 ms to complete any OPP/COMMS + * operation, the operation could start just before jiffie is about + * to be incremented. So setting timeout value of 20ms = 2jiffies@100Hz + */ +#define TIMEOUT_US 20000 + +#define MAX_OPPS 8 +#define CA15_DVFS 0 +#define CA7_DVFS 1 +#define SPC_SYS_CFG 2 +#define STAT_COMPLETE(type) ((1 << 0) << (type << 2)) +#define STAT_ERR(type) ((1 << 1) << (type << 2)) +#define RESPONSE_MASK(type) (STAT_COMPLETE(type) | STAT_ERR(type)) + +struct ve_spc_opp { + unsigned long freq; + unsigned long u_volt; +}; + struct ve_spc_drvdata { void __iomem *baseaddr; /* @@ -49,6 +99,12 @@ struct ve_spc_drvdata { * It corresponds to A15 processors MPIDR[15:8] bitfield */ u32 a15_clusid; + uint32_t cur_rsp_mask; + uint32_t cur_rsp_stat; + struct semaphore sem; + struct completion done; + struct ve_spc_opp *opps[MAX_CLUSTERS]; + int num_opps[MAX_CLUSTERS]; }; static struct ve_spc_drvdata *info; @@ -157,8 +213,197 @@ void ve_spc_powerdown(u32 cluster, bool enable) writel_relaxed(enable, info->baseaddr + pwdrn_reg); } -int __init ve_spc_init(void __iomem *baseaddr, u32 a15_clusid) +static int ve_spc_get_performance(int cluster, u32 *freq) +{ + struct ve_spc_opp *opps = info->opps[cluster]; + u32 perf_cfg_reg = 0; + u32 perf; + + perf_cfg_reg = cluster_is_a15(cluster) ? PERF_LVL_A15 : PERF_LVL_A7; + + perf = readl_relaxed(info->baseaddr + perf_cfg_reg); + if (perf >= info->num_opps[cluster]) + return -EINVAL; + + opps += perf; + *freq = opps->freq; + + return 0; +} + +/* find closest match to given frequency in OPP table */ +static int ve_spc_round_performance(int cluster, u32 freq) +{ + int idx, max_opp = info->num_opps[cluster]; + struct ve_spc_opp *opps = info->opps[cluster]; + u32 fmin = 0, fmax = ~0, ftmp; + + freq /= 1000; /* OPP entries in kHz */ + for (idx = 0; idx < max_opp; idx++, opps++) { + ftmp = opps->freq; + if (ftmp >= freq) { + if (ftmp <= fmax) + fmax = ftmp; + } else { + if (ftmp >= fmin) + fmin = ftmp; + } + } + if (fmax != ~0) + return fmax * 1000; + else + return fmin * 1000; +} + +static int ve_spc_find_performance_index(int cluster, u32 freq) +{ + int idx, max_opp = info->num_opps[cluster]; + struct ve_spc_opp *opps = info->opps[cluster]; + + for (idx = 0; idx < max_opp; idx++, opps++) + if (opps->freq == freq) + break; + return (idx == max_opp) ? -EINVAL : idx; +} + +static int ve_spc_waitforcompletion(int req_type) +{ + int ret = wait_for_completion_interruptible_timeout( + &info->done, usecs_to_jiffies(TIMEOUT_US)); + if (ret == 0) + ret = -ETIMEDOUT; + else if (ret > 0) + ret = info->cur_rsp_stat & STAT_COMPLETE(req_type) ? 0 : -EIO; + return ret; +} + +static int ve_spc_set_performance(int cluster, u32 freq) +{ + u32 perf_cfg_reg, perf_stat_reg; + int ret, perf, req_type; + + if (cluster_is_a15(cluster)) { + req_type = CA15_DVFS; + perf_cfg_reg = PERF_LVL_A15; + perf_stat_reg = PERF_REQ_A15; + } else { + req_type = CA7_DVFS; + perf_cfg_reg = PERF_LVL_A7; + perf_stat_reg = PERF_REQ_A7; + } + + perf = ve_spc_find_performance_index(cluster, freq); + + if (perf < 0) + return perf; + + if (down_timeout(&info->sem, usecs_to_jiffies(TIMEOUT_US))) + return -ETIME; + + init_completion(&info->done); + info->cur_rsp_mask = RESPONSE_MASK(req_type); + + writel(perf, info->baseaddr + perf_cfg_reg); + ret = ve_spc_waitforcompletion(req_type); + + info->cur_rsp_mask = 0; + up(&info->sem); + + return ret; +} + +static int ve_spc_read_sys_cfg(int func, int offset, uint32_t *data) +{ + int ret; + + if (down_timeout(&info->sem, usecs_to_jiffies(TIMEOUT_US))) + return -ETIME; + + init_completion(&info->done); + info->cur_rsp_mask = RESPONSE_MASK(SPC_SYS_CFG); + + /* Set the control value */ + writel(SYSCFG_START | func | offset >> 2, info->baseaddr + COMMS); + ret = ve_spc_waitforcompletion(SPC_SYS_CFG); + + if (ret == 0) + *data = readl(info->baseaddr + SYSCFG_RDATA); + + info->cur_rsp_mask = 0; + up(&info->sem); + + return ret; +} + +static irqreturn_t ve_spc_irq_handler(int irq, void *data) +{ + struct ve_spc_drvdata *drv_data = data; + uint32_t status = readl_relaxed(drv_data->baseaddr + PWC_STATUS); + + if (info->cur_rsp_mask & status) { + info->cur_rsp_stat = status; + complete(&drv_data->done); + } + + return IRQ_HANDLED; +} + +/* + * +--------------------------+ + * | 31 20 | 19 0 | + * +--------------------------+ + * | u_volt | freq(kHz) | + * +--------------------------+ + */ +#define MULT_FACTOR 20 +#define VOLT_SHIFT 20 +#define FREQ_MASK (0xFFFFF) +static int ve_spc_populate_opps(uint32_t cluster) { + uint32_t data = 0, off, ret, idx; + struct ve_spc_opp *opps; + + opps = kzalloc(sizeof(*opps) * MAX_OPPS, GFP_KERNEL); + if (!opps) + return -ENOMEM; + + info->opps[cluster] = opps; + + off = cluster_is_a15(cluster) ? A15_PERFVAL_BASE : A7_PERFVAL_BASE; + for (idx = 0; idx < MAX_OPPS; idx++, off += 4, opps++) { + ret = ve_spc_read_sys_cfg(SYSCFG_SCC, off, &data); + if (!ret) { + opps->freq = (data & FREQ_MASK) * MULT_FACTOR; + opps->u_volt = data >> VOLT_SHIFT; + } else { + break; + } + } + info->num_opps[cluster] = idx; + + return ret; +} + +static int ve_init_opp_table(struct device *cpu_dev) +{ + int cluster = topology_physical_package_id(cpu_dev->id); + int idx, ret = 0, max_opp = info->num_opps[cluster]; + struct ve_spc_opp *opps = info->opps[cluster]; + + for (idx = 0; idx < max_opp; idx++, opps++) { + ret = dev_pm_opp_add(cpu_dev, opps->freq * 1000, opps->u_volt); + if (ret) { + dev_warn(cpu_dev, "failed to add opp %lu %lu\n", + opps->freq, opps->u_volt); + return ret; + } + } + return ret; +} + +int __init ve_spc_init(void __iomem *baseaddr, u32 a15_clusid, int irq) +{ + int ret; info = kzalloc(sizeof(*info), GFP_KERNEL); if (!info) { pr_err(SPCLOG "unable to allocate mem\n"); @@ -168,6 +413,25 @@ int __init ve_spc_init(void __iomem *baseaddr, u32 a15_clusid) info->baseaddr = baseaddr; info->a15_clusid = a15_clusid; + if (irq <= 0) { + pr_err(SPCLOG "Invalid IRQ %d\n", irq); + kfree(info); + return -EINVAL; + } + + init_completion(&info->done); + + readl_relaxed(info->baseaddr + PWC_STATUS); + + ret = request_irq(irq, ve_spc_irq_handler, IRQF_TRIGGER_HIGH + | IRQF_ONESHOT, "vexpress-spc", info); + if (ret) { + pr_err(SPCLOG "IRQ %d request failed\n", irq); + kfree(info); + return -ENODEV; + } + + sema_init(&info->sem, 1); /* * Multi-cluster systems may need this data when non-coherent, during * cluster power-up/power-down. Make sure driver info reaches main @@ -178,3 +442,103 @@ int __init ve_spc_init(void __iomem *baseaddr, u32 a15_clusid) return 0; } + +struct clk_spc { + struct clk_hw hw; + int cluster; +}; + +#define to_clk_spc(spc) container_of(spc, struct clk_spc, hw) +static unsigned long spc_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_spc *spc = to_clk_spc(hw); + u32 freq; + + if (ve_spc_get_performance(spc->cluster, &freq)) + return -EIO; + + return freq * 1000; +} + +static long spc_round_rate(struct clk_hw *hw, unsigned long drate, + unsigned long *parent_rate) +{ + struct clk_spc *spc = to_clk_spc(hw); + + return ve_spc_round_performance(spc->cluster, drate); +} + +static int spc_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_spc *spc = to_clk_spc(hw); + + return ve_spc_set_performance(spc->cluster, rate / 1000); +} + +static struct clk_ops clk_spc_ops = { + .recalc_rate = spc_recalc_rate, + .round_rate = spc_round_rate, + .set_rate = spc_set_rate, +}; + +static struct clk *ve_spc_clk_register(struct device *cpu_dev) +{ + struct clk_init_data init; + struct clk_spc *spc; + + spc = kzalloc(sizeof(*spc), GFP_KERNEL); + if (!spc) { + pr_err("could not allocate spc clk\n"); + return ERR_PTR(-ENOMEM); + } + + spc->hw.init = &init; + spc->cluster = topology_physical_package_id(cpu_dev->id); + + init.name = dev_name(cpu_dev); + init.ops = &clk_spc_ops; + init.flags = CLK_IS_ROOT | CLK_GET_RATE_NOCACHE; + init.num_parents = 0; + + return devm_clk_register(cpu_dev, &spc->hw); +} + +static int __init ve_spc_clk_init(void) +{ + int cpu; + struct clk *clk; + + if (!info) + return 0; /* Continue only if SPC is initialised */ + + if (ve_spc_populate_opps(0) || ve_spc_populate_opps(1)) { + pr_err("failed to build OPP table\n"); + return -ENODEV; + } + + for_each_possible_cpu(cpu) { + struct device *cpu_dev = get_cpu_device(cpu); + if (!cpu_dev) { + pr_warn("failed to get cpu%d device\n", cpu); + continue; + } + clk = ve_spc_clk_register(cpu_dev); + if (IS_ERR(clk)) { + pr_warn("failed to register cpu%d clock\n", cpu); + continue; + } + if (clk_register_clkdev(clk, NULL, dev_name(cpu_dev))) { + pr_warn("failed to register cpu%d clock lookup\n", cpu); + continue; + } + + if (ve_init_opp_table(cpu_dev)) + pr_warn("failed to initialise cpu%d opp table\n", cpu); + } + + platform_device_register_simple("vexpress-spc-cpufreq", -1, NULL, 0); + return 0; +} +module_init(ve_spc_clk_init); diff --git a/arch/arm/mach-vexpress/spc.h b/arch/arm/mach-vexpress/spc.h index 5f7e4a4..dbd44c3 100644 --- a/arch/arm/mach-vexpress/spc.h +++ b/arch/arm/mach-vexpress/spc.h @@ -15,7 +15,7 @@ #ifndef __SPC_H_ #define __SPC_H_ -int __init ve_spc_init(void __iomem *base, u32 a15_clusid); +int __init ve_spc_init(void __iomem *base, u32 a15_clusid, int irq); void ve_spc_global_wakeup_irq(bool set); void ve_spc_cpu_wakeup_irq(u32 cluster, u32 cpu, bool set); void ve_spc_set_resume_addr(u32 cluster, u32 cpu, u32 addr); diff --git a/arch/arm/mach-vexpress/tc2_pm.c b/arch/arm/mach-vexpress/tc2_pm.c index 4eb92eb..05a364c50 100644 --- a/arch/arm/mach-vexpress/tc2_pm.c +++ b/arch/arm/mach-vexpress/tc2_pm.c @@ -16,6 +16,7 @@ #include <linux/io.h> #include <linux/kernel.h> #include <linux/of_address.h> +#include <linux/of_irq.h> #include <linux/spinlock.h> #include <linux/errno.h> #include <linux/irqchip/arm-gic.h> @@ -267,7 +268,7 @@ static void __naked tc2_pm_power_up_setup(unsigned int affinity_level) static int __init tc2_pm_init(void) { - int ret; + int ret, irq; void __iomem *scc; u32 a15_cluster_id, a7_cluster_id, sys_info; struct device_node *np; @@ -292,13 +293,15 @@ static int __init tc2_pm_init(void) tc2_nr_cpus[a15_cluster_id] = (sys_info >> 16) & 0xf; tc2_nr_cpus[a7_cluster_id] = (sys_info >> 20) & 0xf; + irq = irq_of_parse_and_map(np, 0); + /* * A subset of the SCC registers is also used to communicate * with the SPC (power controller). We need to be able to * drive it very early in the boot process to power up * processors, so we initialize the SPC driver here. */ - ret = ve_spc_init(scc + SPC_BASE, a15_cluster_id); + ret = ve_spc_init(scc + SPC_BASE, a15_cluster_id, irq); if (ret) return ret; diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c index 5f25256..9a7bd13 100644 --- a/arch/arm/mach-zynq/common.c +++ b/arch/arm/mach-zynq/common.c @@ -44,6 +44,10 @@ static struct of_device_id zynq_of_bus_ids[] __initdata = { {} }; +static struct platform_device zynq_cpuidle_device = { + .name = "cpuidle-zynq", +}; + /** * zynq_init_machine - System specific initialization, intended to be * called from board specific initialization. @@ -56,6 +60,8 @@ static void __init zynq_init_machine(void) l2x0_of_init(0x02060000, 0xF0F0FFFF); of_platform_bus_probe(NULL, zynq_of_bus_ids, NULL); + + platform_device_register(&zynq_cpuidle_device); } static void __init zynq_timer_init(void) diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 74314bd..e887b57 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -1440,7 +1440,6 @@ source "drivers/cpufreq/Kconfig" config BFIN_CPU_FREQ bool depends on CPU_FREQ - select CPU_FREQ_TABLE default y config CPU_VOLTAGE diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig index 02380be..9c957c8 100644 --- a/arch/cris/Kconfig +++ b/arch/cris/Kconfig @@ -130,13 +130,11 @@ config SVINTO_SIM config ETRAXFS bool "ETRAX-FS-V32" - select CPU_FREQ_TABLE if CPU_FREQ help Support CRIS V32. config CRIS_MACH_ARTPEC3 bool "ARTPEC-3" - select CPU_FREQ_TABLE if CPU_FREQ help Support Axis ARTPEC-3. diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 5eb71d2..59d52e3 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -882,40 +882,10 @@ __init void prefill_possible_map(void) set_cpu_possible(i, true); } -static int _acpi_map_lsapic(acpi_handle handle, int *pcpu) +static int _acpi_map_lsapic(acpi_handle handle, int physid, int *pcpu) { - struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; - union acpi_object *obj; - struct acpi_madt_local_sapic *lsapic; cpumask_t tmp_map; - int cpu, physid; - - if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer))) - return -EINVAL; - - if (!buffer.length || !buffer.pointer) - return -EINVAL; - - obj = buffer.pointer; - if (obj->type != ACPI_TYPE_BUFFER) - { - kfree(buffer.pointer); - return -EINVAL; - } - - lsapic = (struct acpi_madt_local_sapic *)obj->buffer.pointer; - - if ((lsapic->header.type != ACPI_MADT_TYPE_LOCAL_SAPIC) || - (!(lsapic->lapic_flags & ACPI_MADT_ENABLED))) { - kfree(buffer.pointer); - return -EINVAL; - } - - physid = ((lsapic->id << 8) | (lsapic->eid)); - - kfree(buffer.pointer); - buffer.length = ACPI_ALLOCATE_BUFFER; - buffer.pointer = NULL; + int cpu; cpumask_complement(&tmp_map, cpu_present_mask); cpu = cpumask_first(&tmp_map); @@ -934,9 +904,9 @@ static int _acpi_map_lsapic(acpi_handle handle, int *pcpu) } /* wrapper to silence section mismatch warning */ -int __ref acpi_map_lsapic(acpi_handle handle, int *pcpu) +int __ref acpi_map_lsapic(acpi_handle handle, int physid, int *pcpu) { - return _acpi_map_lsapic(handle, pcpu); + return _acpi_map_lsapic(handle, physid, pcpu); } EXPORT_SYMBOL(acpi_map_lsapic); diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 8e59abc..930cd8a 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -844,18 +844,6 @@ void __cpu_die(unsigned int cpu) smp_ops->cpu_die(cpu); } -static DEFINE_MUTEX(powerpc_cpu_hotplug_driver_mutex); - -void cpu_hotplug_driver_lock() -{ - mutex_lock(&powerpc_cpu_hotplug_driver_mutex); -} - -void cpu_hotplug_driver_unlock() -{ - mutex_unlock(&powerpc_cpu_hotplug_driver_mutex); -} - void cpu_die(void) { if (ppc_md.cpu_die) diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c index 7cfdaae..a8fe5aa 100644 --- a/arch/powerpc/platforms/pseries/dlpar.c +++ b/arch/powerpc/platforms/pseries/dlpar.c @@ -404,46 +404,38 @@ static ssize_t dlpar_cpu_probe(const char *buf, size_t count) unsigned long drc_index; int rc; - cpu_hotplug_driver_lock(); rc = strict_strtoul(buf, 0, &drc_index); - if (rc) { - rc = -EINVAL; - goto out; - } + if (rc) + return -EINVAL; parent = of_find_node_by_path("/cpus"); - if (!parent) { - rc = -ENODEV; - goto out; - } + if (!parent) + return -ENODEV; dn = dlpar_configure_connector(drc_index, parent); - if (!dn) { - rc = -EINVAL; - goto out; - } + if (!dn) + return -EINVAL; of_node_put(parent); rc = dlpar_acquire_drc(drc_index); if (rc) { dlpar_free_cc_nodes(dn); - rc = -EINVAL; - goto out; + return -EINVAL; } rc = dlpar_attach_node(dn); if (rc) { dlpar_release_drc(drc_index); dlpar_free_cc_nodes(dn); - goto out; + return rc; } rc = dlpar_online_cpu(dn); -out: - cpu_hotplug_driver_unlock(); + if (rc) + return rc; - return rc ? rc : count; + return count; } static int dlpar_offline_cpu(struct device_node *dn) @@ -516,30 +508,27 @@ static ssize_t dlpar_cpu_release(const char *buf, size_t count) return -EINVAL; } - cpu_hotplug_driver_lock(); rc = dlpar_offline_cpu(dn); if (rc) { of_node_put(dn); - rc = -EINVAL; - goto out; + return -EINVAL; } rc = dlpar_release_drc(*drc_index); if (rc) { of_node_put(dn); - goto out; + return rc; } rc = dlpar_detach_node(dn); if (rc) { dlpar_acquire_drc(*drc_index); - goto out; + return rc; } of_node_put(dn); -out: - cpu_hotplug_driver_unlock(); - return rc ? rc : count; + + return count; } static int __init pseries_dlpar_init(void) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 725e157..14dc9c7 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -255,10 +255,6 @@ config ARCH_HWEIGHT_CFLAGS default "-fcall-saved-ecx -fcall-saved-edx" if X86_32 default "-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11" if X86_64 -config ARCH_CPU_PROBE_RELEASE - def_bool y - depends on HOTPLUG_CPU - config ARCH_SUPPORTS_UPROBES def_bool y diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h index b1977ba..c8c1e70 100644 --- a/arch/x86/include/asm/acpi.h +++ b/arch/x86/include/asm/acpi.h @@ -26,6 +26,7 @@ #include <acpi/pdc_intel.h> #include <asm/numa.h> +#include <asm/fixmap.h> #include <asm/processor.h> #include <asm/mmu.h> #include <asm/mpspec.h> diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h index 626cf70..3142a94 100644 --- a/arch/x86/include/asm/mpspec.h +++ b/arch/x86/include/asm/mpspec.h @@ -94,7 +94,7 @@ static inline void early_reserve_e820_mpc_new(void) { } #define default_get_smp_config x86_init_uint_noop #endif -void generic_processor_info(int apicid, int version); +int generic_processor_info(int apicid, int version); #ifdef CONFIG_ACPI extern void mp_register_ioapic(int id, u32 address, u32 gsi_base); extern void mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h index cb75028..e139b13 100644 --- a/arch/x86/include/asm/msr.h +++ b/arch/x86/include/asm/msr.h @@ -218,10 +218,14 @@ void msrs_free(struct msr *msrs); #ifdef CONFIG_SMP int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h); int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h); +int rdmsrl_on_cpu(unsigned int cpu, u32 msr_no, u64 *q); +int wrmsrl_on_cpu(unsigned int cpu, u32 msr_no, u64 q); void rdmsr_on_cpus(const struct cpumask *mask, u32 msr_no, struct msr *msrs); void wrmsr_on_cpus(const struct cpumask *mask, u32 msr_no, struct msr *msrs); int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h); int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h); +int rdmsrl_safe_on_cpu(unsigned int cpu, u32 msr_no, u64 *q); +int wrmsrl_safe_on_cpu(unsigned int cpu, u32 msr_no, u64 q); int rdmsr_safe_regs_on_cpu(unsigned int cpu, u32 regs[8]); int wrmsr_safe_regs_on_cpu(unsigned int cpu, u32 regs[8]); #else /* CONFIG_SMP */ @@ -235,6 +239,16 @@ static inline int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h) wrmsr(msr_no, l, h); return 0; } +static inline int rdmsrl_on_cpu(unsigned int cpu, u32 msr_no, u64 *q) +{ + rdmsrl(msr_no, *q); + return 0; +} +static inline int wrmsrl_on_cpu(unsigned int cpu, u32 msr_no, u64 q) +{ + wrmsrl(msr_no, q); + return 0; +} static inline void rdmsr_on_cpus(const struct cpumask *m, u32 msr_no, struct msr *msrs) { @@ -254,6 +268,14 @@ static inline int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h) { return wrmsr_safe(msr_no, l, h); } +static inline int rdmsrl_safe_on_cpu(unsigned int cpu, u32 msr_no, u64 *q) +{ + return rdmsrl_safe(msr_no, q); +} +static inline int wrmsrl_safe_on_cpu(unsigned int cpu, u32 msr_no, u64 q) +{ + return wrmsrl_safe(msr_no, q); +} static inline int rdmsr_safe_regs_on_cpu(unsigned int cpu, u32 regs[8]) { return rdmsr_safe_regs(regs); diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 40c7660..6c0b43b 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -189,24 +189,31 @@ static int __init acpi_parse_madt(struct acpi_table_header *table) return 0; } -static void acpi_register_lapic(int id, u8 enabled) +/** + * acpi_register_lapic - register a local apic and generates a logic cpu number + * @id: local apic id to register + * @enabled: this cpu is enabled or not + * + * Returns the logic cpu number which maps to the local apic + */ +static int acpi_register_lapic(int id, u8 enabled) { unsigned int ver = 0; if (id >= MAX_LOCAL_APIC) { printk(KERN_INFO PREFIX "skipped apicid that is too big\n"); - return; + return -EINVAL; } if (!enabled) { ++disabled_cpus; - return; + return -EINVAL; } if (boot_cpu_physical_apicid != -1U) ver = apic_version[boot_cpu_physical_apicid]; - generic_processor_info(id, ver); + return generic_processor_info(id, ver); } static int __init @@ -614,84 +621,27 @@ static void acpi_map_cpu2node(acpi_handle handle, int cpu, int physid) #endif } -static int _acpi_map_lsapic(acpi_handle handle, int *pcpu) +static int _acpi_map_lsapic(acpi_handle handle, int physid, int *pcpu) { - struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; - union acpi_object *obj; - struct acpi_madt_local_apic *lapic; - cpumask_var_t tmp_map, new_map; - u8 physid; int cpu; - int retval = -ENOMEM; - - if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer))) - return -EINVAL; - - if (!buffer.length || !buffer.pointer) - return -EINVAL; - - obj = buffer.pointer; - if (obj->type != ACPI_TYPE_BUFFER || - obj->buffer.length < sizeof(*lapic)) { - kfree(buffer.pointer); - return -EINVAL; - } - lapic = (struct acpi_madt_local_apic *)obj->buffer.pointer; - - if (lapic->header.type != ACPI_MADT_TYPE_LOCAL_APIC || - !(lapic->lapic_flags & ACPI_MADT_ENABLED)) { - kfree(buffer.pointer); - return -EINVAL; - } - - physid = lapic->id; - - kfree(buffer.pointer); - buffer.length = ACPI_ALLOCATE_BUFFER; - buffer.pointer = NULL; - lapic = NULL; - - if (!alloc_cpumask_var(&tmp_map, GFP_KERNEL)) - goto out; - - if (!alloc_cpumask_var(&new_map, GFP_KERNEL)) - goto free_tmp_map; - - cpumask_copy(tmp_map, cpu_present_mask); - acpi_register_lapic(physid, ACPI_MADT_ENABLED); - - /* - * If acpi_register_lapic successfully generates a new logical cpu - * number, then the following will get us exactly what was mapped - */ - cpumask_andnot(new_map, cpu_present_mask, tmp_map); - if (cpumask_empty(new_map)) { - printk ("Unable to map lapic to logical cpu number\n"); - retval = -EINVAL; - goto free_new_map; + cpu = acpi_register_lapic(physid, ACPI_MADT_ENABLED); + if (cpu < 0) { + pr_info(PREFIX "Unable to map lapic to logical cpu number\n"); + return cpu; } acpi_processor_set_pdc(handle); - - cpu = cpumask_first(new_map); acpi_map_cpu2node(handle, cpu, physid); *pcpu = cpu; - retval = 0; - -free_new_map: - free_cpumask_var(new_map); -free_tmp_map: - free_cpumask_var(tmp_map); -out: - return retval; + return 0; } /* wrapper to silence section mismatch warning */ -int __ref acpi_map_lsapic(acpi_handle handle, int *pcpu) +int __ref acpi_map_lsapic(acpi_handle handle, int physid, int *pcpu) { - return _acpi_map_lsapic(handle, pcpu); + return _acpi_map_lsapic(handle, physid, pcpu); } EXPORT_SYMBOL(acpi_map_lsapic); @@ -745,7 +695,7 @@ static int __init acpi_parse_sbf(struct acpi_table_header *table) #ifdef CONFIG_HPET_TIMER #include <asm/hpet.h> -static struct __initdata resource *hpet_res; +static struct resource *hpet_res __initdata; static int __init acpi_parse_hpet(struct acpi_table_header *table) { diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index 3312010..3a2ae4c 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -26,6 +26,17 @@ static char temp_stack[4096]; #endif /** + * x86_acpi_enter_sleep_state - enter sleep state + * @state: Sleep state to enter. + * + * Wrapper around acpi_enter_sleep_state() to be called by assmebly. + */ +acpi_status asmlinkage x86_acpi_enter_sleep_state(u8 state) +{ + return acpi_enter_sleep_state(state); +} + +/** * x86_acpi_suspend_lowlevel - save kernel state * * Create an identity mapped page table and copy the wakeup routine to diff --git a/arch/x86/kernel/acpi/sleep.h b/arch/x86/kernel/acpi/sleep.h index c9c2c98..65c7b60 100644 --- a/arch/x86/kernel/acpi/sleep.h +++ b/arch/x86/kernel/acpi/sleep.h @@ -17,3 +17,5 @@ extern void wakeup_long64(void); extern void do_suspend_lowlevel(void); extern int x86_acpi_suspend_lowlevel(void); + +acpi_status asmlinkage x86_acpi_enter_sleep_state(u8 state); diff --git a/arch/x86/kernel/acpi/wakeup_32.S b/arch/x86/kernel/acpi/wakeup_32.S index d1daa66..665c6b7 100644 --- a/arch/x86/kernel/acpi/wakeup_32.S +++ b/arch/x86/kernel/acpi/wakeup_32.S @@ -73,7 +73,7 @@ ENTRY(do_suspend_lowlevel) call save_processor_state call save_registers pushl $3 - call acpi_enter_sleep_state + call x86_acpi_enter_sleep_state addl $4, %esp # In case of S3 failure, we'll emerge here. Jump diff --git a/arch/x86/kernel/acpi/wakeup_64.S b/arch/x86/kernel/acpi/wakeup_64.S index 8ea5164..ae693b5 100644 --- a/arch/x86/kernel/acpi/wakeup_64.S +++ b/arch/x86/kernel/acpi/wakeup_64.S @@ -73,7 +73,7 @@ ENTRY(do_suspend_lowlevel) addq $8, %rsp movl $3, %edi xorl %eax, %eax - call acpi_enter_sleep_state + call x86_acpi_enter_sleep_state /* in case something went wrong, restore the machine status and go on */ jmp resume_point diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index a7eb82d..ed165d6 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -2107,7 +2107,7 @@ void disconnect_bsp_APIC(int virt_wire_setup) apic_write(APIC_LVT1, value); } -void generic_processor_info(int apicid, int version) +int generic_processor_info(int apicid, int version) { int cpu, max = nr_cpu_ids; bool boot_cpu_detected = physid_isset(boot_cpu_physical_apicid, @@ -2127,7 +2127,7 @@ void generic_processor_info(int apicid, int version) " Processor %d/0x%x ignored.\n", max, thiscpu, apicid); disabled_cpus++; - return; + return -ENODEV; } if (num_processors >= nr_cpu_ids) { @@ -2138,7 +2138,7 @@ void generic_processor_info(int apicid, int version) " Processor %d/0x%x ignored.\n", max, thiscpu, apicid); disabled_cpus++; - return; + return -EINVAL; } num_processors++; @@ -2183,6 +2183,8 @@ void generic_processor_info(int apicid, int version) #endif set_cpu_possible(cpu, true); set_cpu_present(cpu, true); + + return cpu; } int hard_smp_processor_id(void) diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 2a16558..85dc05a 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -81,27 +81,6 @@ /* State of each CPU */ DEFINE_PER_CPU(int, cpu_state) = { 0 }; -#ifdef CONFIG_HOTPLUG_CPU -/* - * We need this for trampoline_base protection from concurrent accesses when - * off- and onlining cores wildly. - */ -static DEFINE_MUTEX(x86_cpu_hotplug_driver_mutex); - -void cpu_hotplug_driver_lock(void) -{ - mutex_lock(&x86_cpu_hotplug_driver_mutex); -} - -void cpu_hotplug_driver_unlock(void) -{ - mutex_unlock(&x86_cpu_hotplug_driver_mutex); -} - -ssize_t arch_cpu_probe(const char *buf, size_t count) { return -1; } -ssize_t arch_cpu_release(const char *buf, size_t count) { return -1; } -#endif - /* Number of siblings per CPU package */ int smp_num_siblings = 1; EXPORT_SYMBOL(smp_num_siblings); diff --git a/arch/x86/kernel/topology.c b/arch/x86/kernel/topology.c index 6e60b5f..649b010 100644 --- a/arch/x86/kernel/topology.c +++ b/arch/x86/kernel/topology.c @@ -65,29 +65,32 @@ int __ref _debug_hotplug_cpu(int cpu, int action) if (!cpu_is_hotpluggable(cpu)) return -EINVAL; - cpu_hotplug_driver_lock(); + lock_device_hotplug(); switch (action) { case 0: ret = cpu_down(cpu); if (!ret) { pr_info("CPU %u is now offline\n", cpu); + dev->offline = true; kobject_uevent(&dev->kobj, KOBJ_OFFLINE); } else pr_debug("Can't offline CPU%d.\n", cpu); break; case 1: ret = cpu_up(cpu); - if (!ret) + if (!ret) { + dev->offline = false; kobject_uevent(&dev->kobj, KOBJ_ONLINE); - else + } else { pr_debug("Can't online CPU%d.\n", cpu); + } break; default: ret = -EINVAL; } - cpu_hotplug_driver_unlock(); + unlock_device_hotplug(); return ret; } diff --git a/arch/x86/lib/msr-smp.c b/arch/x86/lib/msr-smp.c index a6b1b86..518532e 100644 --- a/arch/x86/lib/msr-smp.c +++ b/arch/x86/lib/msr-smp.c @@ -47,6 +47,21 @@ int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h) } EXPORT_SYMBOL(rdmsr_on_cpu); +int rdmsrl_on_cpu(unsigned int cpu, u32 msr_no, u64 *q) +{ + int err; + struct msr_info rv; + + memset(&rv, 0, sizeof(rv)); + + rv.msr_no = msr_no; + err = smp_call_function_single(cpu, __rdmsr_on_cpu, &rv, 1); + *q = rv.reg.q; + + return err; +} +EXPORT_SYMBOL(rdmsrl_on_cpu); + int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h) { int err; @@ -63,6 +78,22 @@ int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h) } EXPORT_SYMBOL(wrmsr_on_cpu); +int wrmsrl_on_cpu(unsigned int cpu, u32 msr_no, u64 q) +{ + int err; + struct msr_info rv; + + memset(&rv, 0, sizeof(rv)); + + rv.msr_no = msr_no; + rv.reg.q = q; + + err = smp_call_function_single(cpu, __wrmsr_on_cpu, &rv, 1); + + return err; +} +EXPORT_SYMBOL(wrmsrl_on_cpu); + static void __rwmsr_on_cpus(const struct cpumask *mask, u32 msr_no, struct msr *msrs, void (*msr_func) (void *info)) @@ -159,6 +190,37 @@ int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h) } EXPORT_SYMBOL(wrmsr_safe_on_cpu); +int wrmsrl_safe_on_cpu(unsigned int cpu, u32 msr_no, u64 q) +{ + int err; + struct msr_info rv; + + memset(&rv, 0, sizeof(rv)); + + rv.msr_no = msr_no; + rv.reg.q = q; + + err = smp_call_function_single(cpu, __wrmsr_safe_on_cpu, &rv, 1); + + return err ? err : rv.err; +} +EXPORT_SYMBOL(wrmsrl_safe_on_cpu); + +int rdmsrl_safe_on_cpu(unsigned int cpu, u32 msr_no, u64 *q) +{ + int err; + struct msr_info rv; + + memset(&rv, 0, sizeof(rv)); + + rv.msr_no = msr_no; + err = smp_call_function_single(cpu, __rdmsr_safe_on_cpu, &rv, 1); + *q = rv.reg.q; + + return err ? err : rv.err; +} +EXPORT_SYMBOL(rdmsrl_safe_on_cpu); + /* * These variants are significantly slower, but allows control over * the entire 32-bit GPR set. diff --git a/arch/x86/platform/olpc/olpc-xo15-sci.c b/arch/x86/platform/olpc/olpc-xo15-sci.c index fef7d0b..649a12b 100644 --- a/arch/x86/platform/olpc/olpc-xo15-sci.c +++ b/arch/x86/platform/olpc/olpc-xo15-sci.c @@ -40,16 +40,9 @@ static bool lid_wake_on_close; */ static int set_lid_wake_behavior(bool wake_on_close) { - struct acpi_object_list arg_list; - union acpi_object arg; acpi_status status; - arg_list.count = 1; - arg_list.pointer = &arg; - arg.type = ACPI_TYPE_INTEGER; - arg.integer.value = wake_on_close; - - status = acpi_evaluate_object(NULL, "\\_SB.PCI0.LID.LIDW", &arg_list, NULL); + status = acpi_execute_simple_method(NULL, "\\_SB.PCI0.LID.LIDW", wake_on_close); if (ACPI_FAILURE(status)) { pr_warning(PFX "failed to set lid behavior\n"); return 1; |
